korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-18 00:24:58 +08:00
Code Issues Packages Projects Releases Wiki Activity
9ef40c2e9b
linux/Documentation/hwmon/aht10.rst

57 lines
1.5 KiB
ReStructuredText
Raw Normal View History

hwmon: Add AHT10 Temperature and Humidity Sensor Driver This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-08 03:40:14 +08:00
.. SPDX-License-Identifier: GPL-2.0
Kernel driver aht10
=====================
Supported chips:
hwmon: (aht10) Add support for compatible aht20 Add support for compatible AHT20 temperature/humidity sensor. The only difference between the two is that AHT20 has additional crc8 byte. It seems like AHT15 is also supported by the driver but it wasn't verified and tested yet. Tested on Beaglebone black rev C. Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com> Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-05-25 04:19:12 +08:00
* Aosong AHT10/AHT20
hwmon: Add AHT10 Temperature and Humidity Sensor Driver This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-08 03:40:14 +08:00
Prefix: 'aht10'
Addresses scanned: None
hwmon: (aht10) Add support for compatible aht20 Add support for compatible AHT20 temperature/humidity sensor. The only difference between the two is that AHT20 has additional crc8 byte. It seems like AHT15 is also supported by the driver but it wasn't verified and tested yet. Tested on Beaglebone black rev C. Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com> Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-05-25 04:19:12 +08:00
Datasheet(AHT10):
hwmon: Add AHT10 Temperature and Humidity Sensor Driver This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-08 03:40:14 +08:00
Chinese: http://www.aosong.com/userfiles/files/media/AHT10%E4%BA%A7%E5%93%81%E6%89%8B%E5%86%8C%20A3%2020201210.pdf
English: https://server4.eca.ir/eshop/AHT10/Aosong_AHT10_en_draft_0c.pdf
hwmon: (aht10) Add support for compatible aht20 Add support for compatible AHT20 temperature/humidity sensor. The only difference between the two is that AHT20 has additional crc8 byte. It seems like AHT15 is also supported by the driver but it wasn't verified and tested yet. Tested on Beaglebone black rev C. Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com> Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-05-25 04:19:12 +08:00
Datasheet(AHT20):
English: http://www.aosong.com/userfiles/files/media/Data%20Sheet%20AHT20.pdf
hwmon: Add AHT10 Temperature and Humidity Sensor Driver This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-08 03:40:14 +08:00
Author: Johannes Cornelis Draaijer <jcdra1@gmail.com>
Description
-----------
hwmon: (aht10) Add support for compatible aht20 Add support for compatible AHT20 temperature/humidity sensor. The only difference between the two is that AHT20 has additional crc8 byte. It seems like AHT15 is also supported by the driver but it wasn't verified and tested yet. Tested on Beaglebone black rev C. Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com> Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-05-25 04:19:12 +08:00
The AHT10/AHT20 is a Temperature and Humidity sensor
hwmon: Add AHT10 Temperature and Humidity Sensor Driver This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-08 03:40:14 +08:00
The address of this i2c device may only be 0x38
hwmon: (aht10) Add support for compatible aht20 Add support for compatible AHT20 temperature/humidity sensor. The only difference between the two is that AHT20 has additional crc8 byte. It seems like AHT15 is also supported by the driver but it wasn't verified and tested yet. Tested on Beaglebone black rev C. Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com> Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-05-25 04:19:12 +08:00
Special Features
----------------
AHT20 has additional CRC8 support which is sent as the last byte of the sensor
values.
hwmon: Add AHT10 Temperature and Humidity Sensor Driver This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-08 03:40:14 +08:00
Usage Notes
-----------
hwmon: (aht10) Add support for compatible aht20 Add support for compatible AHT20 temperature/humidity sensor. The only difference between the two is that AHT20 has additional crc8 byte. It seems like AHT15 is also supported by the driver but it wasn't verified and tested yet. Tested on Beaglebone black rev C. Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com> Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-05-25 04:19:12 +08:00
This driver does not probe for AHT10/ATH20 devices, as there is no reliable
way to determine if an i2c chip is or isn't an AHT10/AHT20. The device has
hwmon: Add AHT10 Temperature and Humidity Sensor Driver This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-08 03:40:14 +08:00
to be instantiated explicitly with the address 0x38. See
Documentation/i2c/instantiating-devices.rst for details.
Sysfs entries
-------------
=============== ============================================
Documentation: hwmon: correct spelling Correct spelling problems for Documentation/hwmon/ as reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20230129231053.20863-4-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-01-30 07:10:47 +08:00
temp1_input Measured temperature in millidegrees Celsius
hwmon: Add AHT10 Temperature and Humidity Sensor Driver This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-08 03:40:14 +08:00
humidity1_input Measured humidity in %H
update_interval The minimum interval for polling the sensor,
in milliseconds. Writable. Must be at
least 2000.
=============== ============================================
Reference in New Issue Copy Permalink