2022-02-09 23:42:41 +08:00
|
|
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
|
|
|
%YAML 1.2
|
|
|
|
|
---
|
|
|
|
|
$id: "http://devicetree.org/schemas/usb/richtek,rt1719.yaml#"
|
|
|
|
|
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
|
|
|
|
|
2022-12-17 00:38:12 +08:00
|
|
|
title: Richtek RT1719 sink-only Type-C PD controller
|
2022-02-09 23:42:41 +08:00
|
|
|
|
|
|
|
|
maintainers:
|
|
|
|
|
- ChiYuan Huang <cy_huang@richtek.com>
|
|
|
|
|
|
|
|
|
|
description: |
|
|
|
|
|
The RT1719 is a sink-only USB Type-C contoller that complies with the latest
|
|
|
|
|
USB Type-C and PD standards. It does the USB Type-C detection including attach
|
|
|
|
|
and orientation. It integrates the physical layer of the USB BMC power
|
|
|
|
|
delivery protocol to allow up to 100W of power. The BMC PD block enables full
|
|
|
|
|
support for alternative interfaces of the Type-C specification.
|
|
|
|
|
|
|
|
|
|
properties:
|
|
|
|
|
compatible:
|
|
|
|
|
enum:
|
|
|
|
|
- richtek,rt1719
|
|
|
|
|
|
|
|
|
|
reg:
|
|
|
|
|
maxItems: 1
|
|
|
|
|
|
|
|
|
|
interrupts:
|
|
|
|
|
maxItems: 1
|
|
|
|
|
|
|
|
|
|
wakeup-source:
|
|
|
|
|
description: enable IRQ remote wakeup, see power/wakeup-source.txt
|
|
|
|
|
type: boolean
|
|
|
|
|
|
|
|
|
|
connector:
|
|
|
|
|
type: object
|
|
|
|
|
$ref: ../connector/usb-connector.yaml#
|
|
|
|
|
description:
|
|
|
|
|
Properties for usb c connector.
|
|
|
|
|
|
|
|
|
|
additionalProperties: false
|
|
|
|
|
|
|
|
|
|
required:
|
|
|
|
|
- compatible
|
|
|
|
|
- reg
|
|
|
|
|
- connector
|
|
|
|
|
- interrupts
|
|
|
|
|
|
|
|
|
|
examples:
|
|
|
|
|
- |
|
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
|
i2c0 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
rt1719@43 {
|
|
|
|
|
compatible = "richtek,rt1719";
|
|
|
|
|
reg = <0x43>;
|
|
|
|
|
interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
|
wakeup-source;
|
|
|
|
|
|
|
|
|
|
connector {
|
|
|
|
|
compatible = "usb-c-connector";
|
|
|
|
|
label = "USB-C";
|
|
|
|
|
|
|
|
|
|
ports {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
port@0 {
|
|
|
|
|
reg = <0>;
|
|
|
|
|
endpoint {
|
|
|
|
|
remote-endpoint = <&usb_hs>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
port@1 {
|
|
|
|
|
reg = <1>;
|
|
|
|
|
endpoint {
|
|
|
|
|
remote-endpoint = <&usb_ss>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
...
|
