linux/arch/powerpc/platforms/512x/Makefile

#
# Makefile for the Freescale PowerPC 512x linux kernel.
#
obj-$(CONFIG_COMMON_CLK)	+= clock-commonclk.o
obj-y				+= mpc512x_shared.o
obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
obj-$(CONFIG_MPC512x_GENERIC)	+= mpc512x_generic.o
obj-$(CONFIG_PDM360NG)		+= pdm360ng.o
[POWERPC] mpc512x: Basic platform support 512x is very similar to 83xx and most of this is patterned after code from 83xx. New platform: changed: arch/powerpc/Kconfig arch/powerpc/platforms/Kconfig arch/powerpc/platforms/Kconfig.cputype arch/powerpc/platforms/Makefile new: arch/powerpc/platforms/512x/* include/asm-powerpc/mpc512x.h Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2008-01-29 01:28:53 +08:00			`#`
			`# Makefile for the Freescale PowerPC 512x linux kernel.`
			`#`
clk: mpc512x: introduce COMMON_CLK for MPC512x (disabled) this change implements a clock driver for the MPC512x PowerPC platform which follows the COMMON_CLK approach and uses common clock drivers shared with other platforms this driver implements the publicly announced set of clocks (those listed in the dt-bindings header file), as well as generates additional 'struct clk' items where the SoC hardware cannot easily get mapped to the common primitives (shared code) of the clock API, or requires "intermediate clock nodes" to represent clocks that have both gates and dividers the previous PPC_CLOCK implementation is kept in place and remains active for the moment, the newly introduced CCF clock driver will receive additional support for backwards compatibility in a subsequent patch before it gets enabled and will replace the PPC_CLOCK approach some of the clock items get pre-enabled in the clock driver to not have them automatically disabled by the underlying clock subsystem because of their being unused -- this approach is desirable because - some of the clocks are useful to have for diagnostics and information despite their not getting claimed by any drivers (CPU, internal and external RAM, internal busses, boot media) - some of the clocks aren't claimed by their peripheral drivers yet, either because of missing driver support or because device tree specs aren't available yet (but the workarounds will get removed as the drivers get adjusted and the device tree provides the clock specs) clkdev registration provides "alias names" for few clock items - to not break those peripheral drivers which encode their component index into the name that is used for clock lookup (UART, SPI, USB) - to not break those drivers which use names for the clock lookup which were encoded in the previous PPC_CLOCK implementation (NFC, VIU, CAN) this workaround will get removed as these drivers get adjusted after device tree based clock lookup has become available the COMMON_CLK implementation copes with device trees which lack an oscillator node (backwards compat), the REF clock is then derived from the IPS bus frequency and multiplier values fetched from hardware Cc: Mike Turquette <mturquette@linaro.org> Cc: Anatolij Gustschin <agust@denx.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> 2013-12-01 06:51:24 +08:00			`obj-$(CONFIG_COMMON_CLK) += clock-commonclk.o`
			`obj-y += mpc512x_shared.o`
powerpc/mpc5121: Add support for CPLD on MPC5121ADS board Add a interrupt host for the interrupt controller in the mpc5121ads cpld. PCI interrupts are 0-7 the rest are 8-15 Touchscreen pendown irq is hardwired to irq1 All other irqs are chained to irq0 Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2008-07-10 04:54:04 +08:00			`obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o`
powerpc/512x: move mpc5121_generic platform to mpc512x_generic. This provides a base for using 512x_generic platform on mpc5125 boards. By this way 512x_GENERIC it could be used for all generic mpc512x boards and kernel could be compiled with mpc512x_defconfig. Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> [agust: applied s/mpc5121/mpc512x in mpc512x_generic.c] Signed-off-by: Anatolij Gustschin <agust@denx.de> 2013-03-20 15:41:52 +08:00			`obj-$(CONFIG_MPC512x_GENERIC) += mpc512x_generic.o`
powerpc/5121: add initial support for PDM360NG board Adds IFM PDM360NG device tree and platform code. Currently following is supported: - Spansion S29GL512P 256 MB NOR flash - ST Micro NAND 1 GiB flash - DIU, please use "fbcon=map:5 video=fslfb:800x480-32@60" at the kernel command line to enable PrimeView PM070WL3 Display support. - FEC - I2C - RTC, EEPROM - MSCAN - PSC UART, please pass "console=tty0 console=ttyPSC5,115200" on the kernel command line. - SPI, ADS7845 Touchscreen - USB0/1 Host - USB0 OTG Host/Device - VIU, Overlay/Capture support Signed-off-by: Markus Fischer <markus.fischer.ec@ifm.com> Signed-off-by: Wolfgang Grandegger <wg@denx.de> Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2010-07-27 19:26:02 +08:00			`obj-$(CONFIG_PDM360NG) += pdm360ng.o`