linux/kernel/module_signing.c

250 lines
5.9 KiB
C
Raw Normal View History

/* Module signature checker
*
* Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/err.h>
MODSIGN: Implement module signature checking Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-09-26 17:11:03 +08:00
#include <crypto/public_key.h>
#include <crypto/hash.h>
#include <keys/asymmetric-type.h>
#include "module-internal.h"
MODSIGN: Implement module signature checking Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-09-26 17:11:03 +08:00
/*
* Module signature information block.
*
* The constituents of the signature section are, in order:
*
* - Signer's name
* - Key identifier
* - Signature data
* - Information block
*/
struct module_signature {
u8 algo; /* Public-key crypto algorithm [enum pkey_algo] */
u8 hash; /* Digest algorithm [enum pkey_hash_algo] */
u8 id_type; /* Key identifier type [enum pkey_id_type] */
u8 signer_len; /* Length of signer's name */
u8 key_id_len; /* Length of key identifier */
u8 __pad[3];
__be32 sig_len; /* Length of signature data */
MODSIGN: Implement module signature checking Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-09-26 17:11:03 +08:00
};
/*
* Digest the module contents.
*/
static struct public_key_signature *mod_make_digest(enum pkey_hash_algo hash,
const void *mod,
unsigned long modlen)
{
struct public_key_signature *pks;
struct crypto_shash *tfm;
struct shash_desc *desc;
size_t digest_size, desc_size;
int ret;
pr_devel("==>%s()\n", __func__);
/* Allocate the hashing algorithm we're going to need and find out how
* big the hash operational data will be.
*/
tfm = crypto_alloc_shash(pkey_hash_algo[hash], 0, 0);
if (IS_ERR(tfm))
return (PTR_ERR(tfm) == -ENOENT) ? ERR_PTR(-ENOPKG) : ERR_CAST(tfm);
desc_size = crypto_shash_descsize(tfm) + sizeof(*desc);
digest_size = crypto_shash_digestsize(tfm);
/* We allocate the hash operational data storage on the end of our
* context data and the digest output buffer on the end of that.
*/
ret = -ENOMEM;
pks = kzalloc(digest_size + sizeof(*pks) + desc_size, GFP_KERNEL);
if (!pks)
goto error_no_pks;
pks->pkey_hash_algo = hash;
pks->digest = (u8 *)pks + sizeof(*pks) + desc_size;
pks->digest_size = digest_size;
desc = (void *)pks + sizeof(*pks);
desc->tfm = tfm;
desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
ret = crypto_shash_init(desc);
if (ret < 0)
goto error;
ret = crypto_shash_finup(desc, mod, modlen, pks->digest);
if (ret < 0)
goto error;
crypto_free_shash(tfm);
pr_devel("<==%s() = ok\n", __func__);
return pks;
error:
kfree(pks);
error_no_pks:
crypto_free_shash(tfm);
pr_devel("<==%s() = %d\n", __func__, ret);
return ERR_PTR(ret);
}
/*
* Extract an MPI array from the signature data. This represents the actual
* signature. Each raw MPI is prefaced by a BE 2-byte value indicating the
* size of the MPI in bytes.
*
* RSA signatures only have one MPI, so currently we only read one.
*/
static int mod_extract_mpi_array(struct public_key_signature *pks,
const void *data, size_t len)
{
size_t nbytes;
MPI mpi;
if (len < 3)
return -EBADMSG;
nbytes = ((const u8 *)data)[0] << 8 | ((const u8 *)data)[1];
data += 2;
len -= 2;
if (len != nbytes)
return -EBADMSG;
mpi = mpi_read_raw_data(data, nbytes);
if (!mpi)
return -ENOMEM;
pks->mpi[0] = mpi;
pks->nr_mpi = 1;
return 0;
}
/*
* Request an asymmetric key.
*/
static struct key *request_asymmetric_key(const char *signer, size_t signer_len,
const u8 *key_id, size_t key_id_len)
{
key_ref_t key;
size_t i;
char *id, *q;
pr_devel("==>%s(,%zu,,%zu)\n", __func__, signer_len, key_id_len);
/* Construct an identifier. */
id = kmalloc(signer_len + 2 + key_id_len * 2 + 1, GFP_KERNEL);
if (!id)
return ERR_PTR(-ENOKEY);
memcpy(id, signer, signer_len);
q = id + signer_len;
*q++ = ':';
*q++ = ' ';
for (i = 0; i < key_id_len; i++) {
*q++ = hex_asc[*key_id >> 4];
*q++ = hex_asc[*key_id++ & 0x0f];
}
*q = 0;
pr_debug("Look up: \"%s\"\n", id);
key = keyring_search(make_key_ref(modsign_keyring, 1),
&key_type_asymmetric, id);
if (IS_ERR(key))
pr_warn("Request for unknown module key '%s' err %ld\n",
id, PTR_ERR(key));
kfree(id);
if (IS_ERR(key)) {
switch (PTR_ERR(key)) {
/* Hide some search errors */
case -EACCES:
case -ENOTDIR:
case -EAGAIN:
return ERR_PTR(-ENOKEY);
default:
return ERR_CAST(key);
}
}
pr_devel("<==%s() = 0 [%x]\n", __func__, key_serial(key_ref_to_ptr(key)));
return key_ref_to_ptr(key);
}
/*
* Verify the signature on a module.
*/
int mod_verify_sig(const void *mod, unsigned long *_modlen)
{
MODSIGN: Implement module signature checking Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-09-26 17:11:03 +08:00
struct public_key_signature *pks;
struct module_signature ms;
struct key *key;
const void *sig;
size_t modlen = *_modlen, sig_len;
MODSIGN: Implement module signature checking Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-09-26 17:11:03 +08:00
int ret;
pr_devel("==>%s(,%zu)\n", __func__, modlen);
MODSIGN: Implement module signature checking Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-09-26 17:11:03 +08:00
if (modlen <= sizeof(ms))
MODSIGN: Implement module signature checking Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-09-26 17:11:03 +08:00
return -EBADMSG;
memcpy(&ms, mod + (modlen - sizeof(ms)), sizeof(ms));
modlen -= sizeof(ms);
MODSIGN: Implement module signature checking Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-09-26 17:11:03 +08:00
sig_len = be32_to_cpu(ms.sig_len);
if (sig_len >= modlen)
MODSIGN: Implement module signature checking Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-09-26 17:11:03 +08:00
return -EBADMSG;
modlen -= sig_len;
if ((size_t)ms.signer_len + ms.key_id_len >= modlen)
return -EBADMSG;
modlen -= (size_t)ms.signer_len + ms.key_id_len;
*_modlen = modlen;
sig = mod + modlen;
MODSIGN: Implement module signature checking Check the signature on the module against the keys compiled into the kernel or available in a hardware key store. Currently, only RSA keys are supported - though that's easy enough to change, and the signature is expected to contain raw components (so not a PGP or PKCS#7 formatted blob). The signature blob is expected to consist of the following pieces in order: (1) The binary identifier for the key. This is expected to match the SubjectKeyIdentifier from an X.509 certificate. Only X.509 type identifiers are currently supported. (2) The signature data, consisting of a series of MPIs in which each is in the format of a 2-byte BE word sizes followed by the content data. (3) A 12 byte information block of the form: struct module_signature { enum pkey_algo algo : 8; enum pkey_hash_algo hash : 8; enum pkey_id_type id_type : 8; u8 __pad; __be32 id_length; __be32 sig_length; }; The three enums are defined in crypto/public_key.h. 'algo' contains the public-key algorithm identifier (0->DSA, 1->RSA). 'hash' contains the digest algorithm identifier (0->MD4, 1->MD5, 2->SHA1, etc.). 'id_type' contains the public-key identifier type (0->PGP, 1->X.509). '__pad' should be 0. 'id_length' should contain in the binary identifier length in BE form. 'sig_length' should contain in the signature data length in BE form. The lengths are in BE order rather than CPU order to make dealing with cross-compilation easier. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor Kconfig fix)
2012-09-26 17:11:03 +08:00
/* For the moment, only support RSA and X.509 identifiers */
if (ms.algo != PKEY_ALGO_RSA ||
ms.id_type != PKEY_ID_X509)
return -ENOPKG;
if (ms.hash >= PKEY_HASH__LAST ||
!pkey_hash_algo[ms.hash])
return -ENOPKG;
key = request_asymmetric_key(sig, ms.signer_len,
sig + ms.signer_len, ms.key_id_len);
if (IS_ERR(key))
return PTR_ERR(key);
pks = mod_make_digest(ms.hash, mod, modlen);
if (IS_ERR(pks)) {
ret = PTR_ERR(pks);
goto error_put_key;
}
ret = mod_extract_mpi_array(pks, sig + ms.signer_len + ms.key_id_len,
sig_len);
if (ret < 0)
goto error_free_pks;
ret = verify_signature(key, pks);
pr_devel("verify_signature() = %d\n", ret);
error_free_pks:
mpi_free(pks->rsa.s);
kfree(pks);
error_put_key:
key_put(key);
pr_devel("<==%s() = %d\n", __func__, ret);
return ret;
}