linux/kernel/irq/pm.c

263 lines
6.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
*
* This file contains power management functions related to interrupts.
*/
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include "internals.h"
bool irq_pm_check_wakeup(struct irq_desc *desc)
{
if (irqd_is_wakeup_armed(&desc->irq_data)) {
irqd_clear(&desc->irq_data, IRQD_WAKEUP_ARMED);
desc->istate |= IRQS_SUSPENDED | IRQS_PENDING;
desc->depth++;
irq_disable(desc);
pm_system_irq_wakeup(irq_desc_get_irq(desc));
return true;
}
return false;
}
/*
* Called from __setup_irq() with desc->lock held after @action has
* been installed in the action chain.
*/
void irq_pm_install_action(struct irq_desc *desc, struct irqaction *action)
{
desc->nr_actions++;
if (action->flags & IRQF_FORCE_RESUME)
desc->force_resume_depth++;
WARN_ON_ONCE(desc->force_resume_depth &&
desc->force_resume_depth != desc->nr_actions);
if (action->flags & IRQF_NO_SUSPEND)
desc->no_suspend_depth++;
genirq / PM: Add flag for shared NO_SUSPEND interrupt lines It currently is required that all users of NO_SUSPEND interrupt lines pass the IRQF_NO_SUSPEND flag when requesting the IRQ or the WARN_ON_ONCE() in irq_pm_install_action() will trigger. That is done to warn about situations in which unprepared interrupt handlers may be run unnecessarily for suspended devices and may attempt to access those devices by mistake. However, it may cause drivers that have no technical reasons for using IRQF_NO_SUSPEND to set that flag just because they happen to share the interrupt line with something like a timer. Moreover, the generic handling of wakeup interrupts introduced by commit 9ce7a25849e8 (genirq: Simplify wakeup mechanism) only works for IRQs without any NO_SUSPEND users, so the drivers of wakeup devices needing to use shared NO_SUSPEND interrupt lines for signaling system wakeup generally have to detect wakeup in their interrupt handlers. Thus if they happen to share an interrupt line with a NO_SUSPEND user, they also need to request that their interrupt handlers be run after suspend_device_irqs(). In both cases the reason for using IRQF_NO_SUSPEND is not because the driver in question has a genuine need to run its interrupt handler after suspend_device_irqs(), but because it happens to share the line with some other NO_SUSPEND user. Otherwise, the driver would do without IRQF_NO_SUSPEND just fine. To make it possible to specify that condition explicitly, introduce a new IRQ action handler flag for shared IRQs, IRQF_COND_SUSPEND, that, when set, will indicate to the IRQ core that the interrupt user is generally fine with suspending the IRQ, but it also can tolerate handler invocations after suspend_device_irqs() and, in particular, it is capable of detecting system wakeup and triggering it as appropriate from its interrupt handler. That will allow us to work around a problem with a shared timer interrupt line on at91 platforms. Link: http://marc.info/?l=linux-kernel&m=142252777602084&w=2 Link: http://marc.info/?t=142252775300011&r=1&w=2 Link: https://lkml.org/lkml/2014/12/15/552 Reported-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com>
2015-02-27 07:07:55 +08:00
else if (action->flags & IRQF_COND_SUSPEND)
desc->cond_suspend_depth++;
WARN_ON_ONCE(desc->no_suspend_depth &&
genirq / PM: Add flag for shared NO_SUSPEND interrupt lines It currently is required that all users of NO_SUSPEND interrupt lines pass the IRQF_NO_SUSPEND flag when requesting the IRQ or the WARN_ON_ONCE() in irq_pm_install_action() will trigger. That is done to warn about situations in which unprepared interrupt handlers may be run unnecessarily for suspended devices and may attempt to access those devices by mistake. However, it may cause drivers that have no technical reasons for using IRQF_NO_SUSPEND to set that flag just because they happen to share the interrupt line with something like a timer. Moreover, the generic handling of wakeup interrupts introduced by commit 9ce7a25849e8 (genirq: Simplify wakeup mechanism) only works for IRQs without any NO_SUSPEND users, so the drivers of wakeup devices needing to use shared NO_SUSPEND interrupt lines for signaling system wakeup generally have to detect wakeup in their interrupt handlers. Thus if they happen to share an interrupt line with a NO_SUSPEND user, they also need to request that their interrupt handlers be run after suspend_device_irqs(). In both cases the reason for using IRQF_NO_SUSPEND is not because the driver in question has a genuine need to run its interrupt handler after suspend_device_irqs(), but because it happens to share the line with some other NO_SUSPEND user. Otherwise, the driver would do without IRQF_NO_SUSPEND just fine. To make it possible to specify that condition explicitly, introduce a new IRQ action handler flag for shared IRQs, IRQF_COND_SUSPEND, that, when set, will indicate to the IRQ core that the interrupt user is generally fine with suspending the IRQ, but it also can tolerate handler invocations after suspend_device_irqs() and, in particular, it is capable of detecting system wakeup and triggering it as appropriate from its interrupt handler. That will allow us to work around a problem with a shared timer interrupt line on at91 platforms. Link: http://marc.info/?l=linux-kernel&m=142252777602084&w=2 Link: http://marc.info/?t=142252775300011&r=1&w=2 Link: https://lkml.org/lkml/2014/12/15/552 Reported-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com>
2015-02-27 07:07:55 +08:00
(desc->no_suspend_depth +
desc->cond_suspend_depth) != desc->nr_actions);
}
/*
* Called from __free_irq() with desc->lock held after @action has
* been removed from the action chain.
*/
void irq_pm_remove_action(struct irq_desc *desc, struct irqaction *action)
{
desc->nr_actions--;
if (action->flags & IRQF_FORCE_RESUME)
desc->force_resume_depth--;
if (action->flags & IRQF_NO_SUSPEND)
desc->no_suspend_depth--;
genirq / PM: Add flag for shared NO_SUSPEND interrupt lines It currently is required that all users of NO_SUSPEND interrupt lines pass the IRQF_NO_SUSPEND flag when requesting the IRQ or the WARN_ON_ONCE() in irq_pm_install_action() will trigger. That is done to warn about situations in which unprepared interrupt handlers may be run unnecessarily for suspended devices and may attempt to access those devices by mistake. However, it may cause drivers that have no technical reasons for using IRQF_NO_SUSPEND to set that flag just because they happen to share the interrupt line with something like a timer. Moreover, the generic handling of wakeup interrupts introduced by commit 9ce7a25849e8 (genirq: Simplify wakeup mechanism) only works for IRQs without any NO_SUSPEND users, so the drivers of wakeup devices needing to use shared NO_SUSPEND interrupt lines for signaling system wakeup generally have to detect wakeup in their interrupt handlers. Thus if they happen to share an interrupt line with a NO_SUSPEND user, they also need to request that their interrupt handlers be run after suspend_device_irqs(). In both cases the reason for using IRQF_NO_SUSPEND is not because the driver in question has a genuine need to run its interrupt handler after suspend_device_irqs(), but because it happens to share the line with some other NO_SUSPEND user. Otherwise, the driver would do without IRQF_NO_SUSPEND just fine. To make it possible to specify that condition explicitly, introduce a new IRQ action handler flag for shared IRQs, IRQF_COND_SUSPEND, that, when set, will indicate to the IRQ core that the interrupt user is generally fine with suspending the IRQ, but it also can tolerate handler invocations after suspend_device_irqs() and, in particular, it is capable of detecting system wakeup and triggering it as appropriate from its interrupt handler. That will allow us to work around a problem with a shared timer interrupt line on at91 platforms. Link: http://marc.info/?l=linux-kernel&m=142252777602084&w=2 Link: http://marc.info/?t=142252775300011&r=1&w=2 Link: https://lkml.org/lkml/2014/12/15/552 Reported-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com>
2015-02-27 07:07:55 +08:00
else if (action->flags & IRQF_COND_SUSPEND)
desc->cond_suspend_depth--;
}
static bool suspend_device_irq(struct irq_desc *desc)
{
unsigned long chipflags = irq_desc_get_chip(desc)->flags;
struct irq_data *irqd = &desc->irq_data;
genirq/PM: Restore system wake up from chained interrupts Commit e509bd7da149 ("genirq: Allow migration of chained interrupts by installing default action") breaks PCS wake up IRQ behaviour on TI OMAP based platforms (dra7-evm). TI OMAP IRQ wake up configuration: GIC-irqchip->PCM_IRQ |- omap_prcm_register_chain_handler |- PRCM-irqchip -> PRCM_IO_IRQ |- pcs_irq_chain_handler |- pinctrl-irqchip -> PCS_uart1_wakeup_irq This happens because IRQ PM code (irq/pm.c) is expected to ignore chained interrupts by default: static bool suspend_device_irq(struct irq_desc *desc) { if (!desc->action || desc->no_suspend_depth) return false; - it's expected !desc->action = true for chained interrupts; but, after above change, all chained interrupt descriptors will have default action handler installed - chained_action. As result, chained interrupts will be silently disabled during system suspend. Hence, fix it by introducing helper function irq_desc_is_chained() and use it in suspend_device_irq() for chained interrupts identification and skip them, once detected. Fixes: e509bd7da149 ("genirq: Allow migration of chained interrupts..") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Tony Lindgren <tony@atomide.com> Cc: <nsekhar@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tony Lindgren <tony@atomide.com> Link: http://lkml.kernel.org/r/1447149492-20699-1-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-10 17:58:12 +08:00
if (!desc->action || irq_desc_is_chained(desc) ||
desc->no_suspend_depth)
return false;
if (irqd_is_wakeup_set(irqd)) {
irqd_set(irqd, IRQD_WAKEUP_ARMED);
if ((chipflags & IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND) &&
irqd_irq_disabled(irqd)) {
/*
* Interrupt marked for wakeup is in disabled state.
* Enable interrupt here to unmask/enable in irqchip
* to be able to resume with such interrupts.
*/
__enable_irq(desc);
irqd_set(irqd, IRQD_IRQ_ENABLED_ON_SUSPEND);
}
/*
* We return true here to force the caller to issue
* synchronize_irq(). We need to make sure that the
* IRQD_WAKEUP_ARMED is visible before we return from
* suspend_device_irqs().
*/
return true;
}
desc->istate |= IRQS_SUSPENDED;
__disable_irq(desc);
/*
* Hardware which has no wakeup source configuration facility
* requires that the non wakeup interrupts are masked at the
* chip level. The chip implementation indicates that with
* IRQCHIP_MASK_ON_SUSPEND.
*/
if (chipflags & IRQCHIP_MASK_ON_SUSPEND)
mask_irq(desc);
return true;
}
/**
* suspend_device_irqs - disable all currently enabled interrupt lines
*
* During system-wide suspend or hibernation device drivers need to be
* prevented from receiving interrupts and this function is provided
* for this purpose.
*
* So we disable all interrupts and mark them IRQS_SUSPENDED except
* for those which are unused, those which are marked as not
* suspendable via an interrupt request with the flag IRQF_NO_SUSPEND
* set and those which are marked as active wakeup sources.
*
* The active wakeup sources are handled by the flow handler entry
* code which checks for the IRQD_WAKEUP_ARMED flag, suspends the
* interrupt and notifies the pm core about the wakeup.
*/
void suspend_device_irqs(void)
{
struct irq_desc *desc;
int irq;
for_each_irq_desc(irq, desc) {
unsigned long flags;
bool sync;
if (irq_settings_is_nested_thread(desc))
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
sync = suspend_device_irq(desc);
raw_spin_unlock_irqrestore(&desc->lock, flags);
if (sync)
synchronize_irq(irq);
}
}
EXPORT_SYMBOL_GPL(suspend_device_irqs);
static void resume_irq(struct irq_desc *desc)
{
struct irq_data *irqd = &desc->irq_data;
irqd_clear(irqd, IRQD_WAKEUP_ARMED);
if (irqd_is_enabled_on_suspend(irqd)) {
/*
* Interrupt marked for wakeup was enabled during suspend
* entry. Disable such interrupts to restore them back to
* original state.
*/
__disable_irq(desc);
irqd_clear(irqd, IRQD_IRQ_ENABLED_ON_SUSPEND);
}
if (desc->istate & IRQS_SUSPENDED)
goto resume;
/* Force resume the interrupt? */
if (!desc->force_resume_depth)
return;
/* Pretend that it got disabled ! */
desc->depth++;
irq_state_set_disabled(desc);
irq_state_set_masked(desc);
resume:
desc->istate &= ~IRQS_SUSPENDED;
__enable_irq(desc);
}
static void resume_irqs(bool want_early)
{
struct irq_desc *desc;
int irq;
for_each_irq_desc(irq, desc) {
unsigned long flags;
bool is_early = desc->action &&
desc->action->flags & IRQF_EARLY_RESUME;
if (!is_early && want_early)
continue;
if (irq_settings_is_nested_thread(desc))
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
resume_irq(desc);
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
}
/**
* rearm_wake_irq - rearm a wakeup interrupt line after signaling wakeup
* @irq: Interrupt to rearm
*/
void rearm_wake_irq(unsigned int irq)
{
unsigned long flags;
struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return;
if (!(desc->istate & IRQS_SUSPENDED) ||
!irqd_is_wakeup_set(&desc->irq_data))
goto unlock;
desc->istate &= ~IRQS_SUSPENDED;
irqd_set(&desc->irq_data, IRQD_WAKEUP_ARMED);
__enable_irq(desc);
unlock:
irq_put_desc_busunlock(desc, flags);
}
/**
genirq: Fix kernel-doc warnings in pm.c, msi.c and ipi.c Fix all kernel-doc warnings in these 3 files and do some simple editing (capitalize acronyms, capitalize Linux). kernel/irq/pm.c:235: warning: expecting prototype for irq_pm_syscore_ops(). Prototype was for irq_pm_syscore_resume() instead kernel/irq/msi.c:530: warning: expecting prototype for __msi_domain_free_irqs(). Prototype was for msi_domain_free_irqs() instead kernel/irq/msi.c:31: warning: No description found for return value of 'alloc_msi_entry' kernel/irq/msi.c:103: warning: No description found for return value of 'msi_domain_set_affinity' kernel/irq/msi.c:288: warning: No description found for return value of 'msi_create_irq_domain' kernel/irq/msi.c:499: warning: No description found for return value of 'msi_domain_alloc_irqs' kernel/irq/msi.c:545: warning: No description found for return value of 'msi_get_domain_info' kernel/irq/ipi.c:264: warning: expecting prototype for ipi_send_mask(). Prototype was for __ipi_send_mask() instead kernel/irq/ipi.c:25: warning: No description found for return value of 'irq_reserve_ipi' kernel/irq/ipi.c:116: warning: No description found for return value of 'irq_destroy_ipi' kernel/irq/ipi.c:163: warning: No description found for return value of 'ipi_get_hwirq' kernel/irq/ipi.c:222: warning: No description found for return value of '__ipi_send_single' kernel/irq/ipi.c:308: warning: No description found for return value of 'ipi_send_single' kernel/irq/ipi.c:329: warning: No description found for return value of 'ipi_send_mask' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210810234835.12547-1-rdunlap@infradead.org
2021-08-11 07:48:35 +08:00
* irq_pm_syscore_resume - enable interrupt lines early
*
* Enable all interrupt lines with %IRQF_EARLY_RESUME set.
*/
static void irq_pm_syscore_resume(void)
{
resume_irqs(true);
}
static struct syscore_ops irq_pm_syscore_ops = {
.resume = irq_pm_syscore_resume,
};
static int __init irq_pm_init_ops(void)
{
register_syscore_ops(&irq_pm_syscore_ops);
return 0;
}
device_initcall(irq_pm_init_ops);
/**
* resume_device_irqs - enable interrupt lines disabled by suspend_device_irqs()
*
* Enable all non-%IRQF_EARLY_RESUME interrupt lines previously
* disabled by suspend_device_irqs() that have the IRQS_SUSPENDED flag
* set as well as those with %IRQF_FORCE_RESUME.
*/
void resume_device_irqs(void)
{
resume_irqs(false);
}
EXPORT_SYMBOL_GPL(resume_device_irqs);