linux/drivers/clocksource/arm_global_timer.c

443 lines
11 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* drivers/clocksource/arm_global_timer.c
*
* Copyright (C) 2013 STMicroelectronics (R&D) Limited.
* Author: Stuart Menefy <stuart.menefy@st.com>
* Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/cpu.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/sched_clock.h>
#include <asm/cputype.h>
#define GT_COUNTER0 0x00
#define GT_COUNTER1 0x04
#define GT_CONTROL 0x08
#define GT_CONTROL_TIMER_ENABLE BIT(0) /* this bit is NOT banked */
#define GT_CONTROL_COMP_ENABLE BIT(1) /* banked */
#define GT_CONTROL_IRQ_ENABLE BIT(2) /* banked */
#define GT_CONTROL_AUTO_INC BIT(3) /* banked */
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
#define GT_CONTROL_PRESCALER_SHIFT 8
#define GT_CONTROL_PRESCALER_MAX 0xF
#define GT_CONTROL_PRESCALER_MASK (GT_CONTROL_PRESCALER_MAX << \
GT_CONTROL_PRESCALER_SHIFT)
#define GT_INT_STATUS 0x0c
#define GT_INT_STATUS_EVENT_FLAG BIT(0)
#define GT_COMP0 0x10
#define GT_COMP1 0x14
#define GT_AUTO_INC 0x18
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
#define MAX_F_ERR 50
/*
* We are expecting to be clocked by the ARM peripheral clock.
*
* Note: it is assumed we are using a prescaler value of zero, so this is
* the units for all operations.
*/
static void __iomem *gt_base;
static struct notifier_block gt_clk_rate_change_nb;
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
static u32 gt_psv_new, gt_psv_bck, gt_target_rate;
static int gt_ppi;
static struct clock_event_device __percpu *gt_evt;
/*
* To get the value from the Global Timer Counter register proceed as follows:
* 1. Read the upper 32-bit timer counter register
* 2. Read the lower 32-bit timer counter register
* 3. Read the upper 32-bit timer counter register again. If the value is
* different to the 32-bit upper value read previously, go back to step 2.
* Otherwise the 64-bit timer counter value is correct.
*/
static u64 notrace _gt_counter_read(void)
{
u64 counter;
u32 lower;
u32 upper, old_upper;
upper = readl_relaxed(gt_base + GT_COUNTER1);
do {
old_upper = upper;
lower = readl_relaxed(gt_base + GT_COUNTER0);
upper = readl_relaxed(gt_base + GT_COUNTER1);
} while (upper != old_upper);
counter = upper;
counter <<= 32;
counter |= lower;
return counter;
}
static u64 gt_counter_read(void)
{
return _gt_counter_read();
}
/**
* To ensure that updates to comparator value register do not set the
* Interrupt Status Register proceed as follows:
* 1. Clear the Comp Enable bit in the Timer Control Register.
* 2. Write the lower 32-bit Comparator Value Register.
* 3. Write the upper 32-bit Comparator Value Register.
* 4. Set the Comp Enable bit and, if necessary, the IRQ enable bit.
*/
static void gt_compare_set(unsigned long delta, int periodic)
{
u64 counter = gt_counter_read();
unsigned long ctrl;
counter += delta;
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
ctrl = readl(gt_base + GT_CONTROL);
ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE |
GT_CONTROL_AUTO_INC);
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
ctrl |= GT_CONTROL_TIMER_ENABLE;
writel_relaxed(ctrl, gt_base + GT_CONTROL);
writel_relaxed(lower_32_bits(counter), gt_base + GT_COMP0);
writel_relaxed(upper_32_bits(counter), gt_base + GT_COMP1);
if (periodic) {
writel_relaxed(delta, gt_base + GT_AUTO_INC);
ctrl |= GT_CONTROL_AUTO_INC;
}
ctrl |= GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE;
writel_relaxed(ctrl, gt_base + GT_CONTROL);
}
static int gt_clockevent_shutdown(struct clock_event_device *evt)
{
unsigned long ctrl;
ctrl = readl(gt_base + GT_CONTROL);
ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE |
GT_CONTROL_AUTO_INC);
writel(ctrl, gt_base + GT_CONTROL);
return 0;
}
static int gt_clockevent_set_periodic(struct clock_event_device *evt)
{
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
gt_compare_set(DIV_ROUND_CLOSEST(gt_target_rate, HZ), 1);
return 0;
}
static int gt_clockevent_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
gt_compare_set(evt, 0);
return 0;
}
static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
if (!(readl_relaxed(gt_base + GT_INT_STATUS) &
GT_INT_STATUS_EVENT_FLAG))
return IRQ_NONE;
/**
* ERRATA 740657( Global Timer can send 2 interrupts for
* the same event in single-shot mode)
* Workaround:
* Either disable single-shot mode.
* Or
* Modify the Interrupt Handler to avoid the
* offending sequence. This is achieved by clearing
* the Global Timer flag _after_ having incremented
* the Comparator register value to a higher value.
*/
if (clockevent_state_oneshot(evt))
gt_compare_set(ULONG_MAX, 0);
writel_relaxed(GT_INT_STATUS_EVENT_FLAG, gt_base + GT_INT_STATUS);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static int gt_starting_cpu(unsigned int cpu)
{
struct clock_event_device *clk = this_cpu_ptr(gt_evt);
clk->name = "arm_global_timer";
clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERCPU;
clk->set_state_shutdown = gt_clockevent_shutdown;
clk->set_state_periodic = gt_clockevent_set_periodic;
clk->set_state_oneshot = gt_clockevent_shutdown;
clk->set_state_oneshot_stopped = gt_clockevent_shutdown;
clk->set_next_event = gt_clockevent_set_next_event;
clk->cpumask = cpumask_of(cpu);
clk->rating = 300;
clk->irq = gt_ppi;
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
clockevents_config_and_register(clk, gt_target_rate,
1, 0xffffffff);
enable_percpu_irq(clk->irq, IRQ_TYPE_NONE);
return 0;
}
static int gt_dying_cpu(unsigned int cpu)
{
struct clock_event_device *clk = this_cpu_ptr(gt_evt);
gt_clockevent_shutdown(clk);
disable_percpu_irq(clk->irq);
return 0;
}
static u64 gt_clocksource_read(struct clocksource *cs)
{
return gt_counter_read();
}
static void gt_resume(struct clocksource *cs)
{
unsigned long ctrl;
ctrl = readl(gt_base + GT_CONTROL);
if (!(ctrl & GT_CONTROL_TIMER_ENABLE))
/* re-enable timer on resume */
writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
}
static struct clocksource gt_clocksource = {
.name = "arm_global_timer",
.rating = 300,
.read = gt_clocksource_read,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.resume = gt_resume,
};
#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
static u64 notrace gt_sched_clock_read(void)
{
return _gt_counter_read();
}
#endif
static unsigned long gt_read_long(void)
{
return readl_relaxed(gt_base + GT_COUNTER0);
}
static struct delay_timer gt_delay_timer = {
.read_current_timer = gt_read_long,
};
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
static void gt_write_presc(u32 psv)
{
u32 reg;
reg = readl(gt_base + GT_CONTROL);
reg &= ~GT_CONTROL_PRESCALER_MASK;
reg |= psv << GT_CONTROL_PRESCALER_SHIFT;
writel(reg, gt_base + GT_CONTROL);
}
static u32 gt_read_presc(void)
{
u32 reg;
reg = readl(gt_base + GT_CONTROL);
reg &= GT_CONTROL_PRESCALER_MASK;
return reg >> GT_CONTROL_PRESCALER_SHIFT;
}
static void __init gt_delay_timer_init(void)
{
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
gt_delay_timer.freq = gt_target_rate;
register_current_timer_delay(&gt_delay_timer);
}
static int __init gt_clocksource_init(void)
{
writel(0, gt_base + GT_CONTROL);
writel(0, gt_base + GT_COUNTER0);
writel(0, gt_base + GT_COUNTER1);
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
/* set prescaler and enable timer on all the cores */
writel(((CONFIG_ARM_GT_INITIAL_PRESCALER_VAL - 1) <<
GT_CONTROL_PRESCALER_SHIFT)
| GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
sched_clock_register(gt_sched_clock_read, 64, gt_target_rate);
#endif
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
return clocksource_register_hz(&gt_clocksource, gt_target_rate);
}
static int gt_clk_rate_change_cb(struct notifier_block *nb,
unsigned long event, void *data)
{
struct clk_notifier_data *ndata = data;
switch (event) {
case PRE_RATE_CHANGE:
{
int psv;
psv = DIV_ROUND_CLOSEST(ndata->new_rate,
gt_target_rate);
if (abs(gt_target_rate - (ndata->new_rate / psv)) > MAX_F_ERR)
return NOTIFY_BAD;
psv--;
/* prescaler within legal range? */
if (psv < 0 || psv > GT_CONTROL_PRESCALER_MAX)
return NOTIFY_BAD;
/*
* store timer clock ctrl register so we can restore it in case
* of an abort.
*/
gt_psv_bck = gt_read_presc();
gt_psv_new = psv;
/* scale down: adjust divider in post-change notification */
if (ndata->new_rate < ndata->old_rate)
return NOTIFY_DONE;
/* scale up: adjust divider now - before frequency change */
gt_write_presc(psv);
break;
}
case POST_RATE_CHANGE:
/* scale up: pre-change notification did the adjustment */
if (ndata->new_rate > ndata->old_rate)
return NOTIFY_OK;
/* scale down: adjust divider now - after frequency change */
gt_write_presc(gt_psv_new);
break;
case ABORT_RATE_CHANGE:
/* we have to undo the adjustment in case we scale up */
if (ndata->new_rate < ndata->old_rate)
return NOTIFY_OK;
/* restore original register value */
gt_write_presc(gt_psv_bck);
break;
default:
return NOTIFY_DONE;
}
return NOTIFY_DONE;
}
static int __init global_timer_of_register(struct device_node *np)
{
struct clk *gt_clk;
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
static unsigned long gt_clk_rate;
int err = 0;
/*
* In A9 r2p0 the comparators for each processor with the global timer
* fire when the timer value is greater than or equal to. In previous
* revisions the comparators fired when the timer value was equal to.
*/
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9
&& (read_cpuid_id() & 0xf0000f) < 0x200000) {
pr_warn("global-timer: non support for this cpu version.\n");
return -ENOSYS;
}
gt_ppi = irq_of_parse_and_map(np, 0);
if (!gt_ppi) {
pr_warn("global-timer: unable to parse irq\n");
return -EINVAL;
}
gt_base = of_iomap(np, 0);
if (!gt_base) {
pr_warn("global-timer: invalid base address\n");
return -ENXIO;
}
gt_clk = of_clk_get(np, 0);
if (!IS_ERR(gt_clk)) {
err = clk_prepare_enable(gt_clk);
if (err)
goto out_unmap;
} else {
pr_warn("global-timer: clk not found\n");
err = -EINVAL;
goto out_unmap;
}
gt_clk_rate = clk_get_rate(gt_clk);
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
gt_target_rate = gt_clk_rate / CONFIG_ARM_GT_INITIAL_PRESCALER_VAL;
gt_clk_rate_change_nb.notifier_call =
gt_clk_rate_change_cb;
err = clk_notifier_register(gt_clk, &gt_clk_rate_change_nb);
if (err) {
pr_warn("Unable to register clock notifier\n");
goto out_clk;
}
gt_evt = alloc_percpu(struct clock_event_device);
if (!gt_evt) {
pr_warn("global-timer: can't allocate memory\n");
err = -ENOMEM;
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
goto out_clk_nb;
}
err = request_percpu_irq(gt_ppi, gt_clockevent_interrupt,
"gt", gt_evt);
if (err) {
pr_warn("global-timer: can't register interrupt %d (%d)\n",
gt_ppi, err);
goto out_free;
}
/* Register and immediately configure the timer on the boot CPU */
err = gt_clocksource_init();
if (err)
goto out_irq;
err = cpuhp_setup_state(CPUHP_AP_ARM_GLOBAL_TIMER_STARTING,
"clockevents/arm/global_timer:starting",
gt_starting_cpu, gt_dying_cpu);
if (err)
goto out_irq;
gt_delay_timer_init();
return 0;
out_irq:
free_percpu_irq(gt_ppi, gt_evt);
out_free:
free_percpu(gt_evt);
clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-04-06 21:00:44 +08:00
out_clk_nb:
clk_notifier_unregister(gt_clk, &gt_clk_rate_change_nb);
out_clk:
clk_disable_unprepare(gt_clk);
out_unmap:
iounmap(gt_base);
WARN(err, "ARM Global timer register failed (%d)\n", err);
return err;
}
/* Only tested on r2p2 and r3p0 */
TIMER_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer",
global_timer_of_register);