linux/drivers/mmc/host/mmc_hsq.c

376 lines
7.8 KiB
C
Raw Normal View History

mmc: Add MMC host software queue support Now the MMC read/write stack will always wait for previous request is completed by mmc_blk_rw_wait(), before sending a new request to hardware, or queue a work to complete request, that will bring context switching overhead and spend some extra time to poll the card for busy completion for I/O writes via sending CMD13, especially for high I/O per second rates, to affect the IO performance. Thus this patch introduces MMC software queue interface based on the hardware command queue engine's interfaces, which is similar with the hardware command queue engine's idea, that can remove the context switching. Moreover we set the default queue depth as 64 for software queue, which allows more requests to be prepared, merged and inserted into IO scheduler to improve performance, but we only allow 2 requests in flight, that is enough to let the irq handler always trigger the next request without a context switch, as well as avoiding a long latency. Moreover the host controller should support HW busy detection for I/O operations when enabling the host software queue. That means, the host controller must not complete a data transfer request, until after the card stops signals busy. From the fio testing data in cover letter, we can see the software queue can improve some performance with 4K block size, increasing about 16% for random read, increasing about 90% for random write, though no obvious improvement for sequential read and write. Moreover we can expand the software queue interface to support MMC packed request or packed command in future. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/4409c1586a9b3ed20d57ad2faf6c262fc3ccb6e2.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-02-12 12:12:56 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
*
* MMC software queue support based on command queue interfaces
*
* Copyright (C) 2019 Linaro, Inc.
* Author: Baolin Wang <baolin.wang@linaro.org>
*/
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/module.h>
mmc: Add MMC host software queue support Now the MMC read/write stack will always wait for previous request is completed by mmc_blk_rw_wait(), before sending a new request to hardware, or queue a work to complete request, that will bring context switching overhead and spend some extra time to poll the card for busy completion for I/O writes via sending CMD13, especially for high I/O per second rates, to affect the IO performance. Thus this patch introduces MMC software queue interface based on the hardware command queue engine's interfaces, which is similar with the hardware command queue engine's idea, that can remove the context switching. Moreover we set the default queue depth as 64 for software queue, which allows more requests to be prepared, merged and inserted into IO scheduler to improve performance, but we only allow 2 requests in flight, that is enough to let the irq handler always trigger the next request without a context switch, as well as avoiding a long latency. Moreover the host controller should support HW busy detection for I/O operations when enabling the host software queue. That means, the host controller must not complete a data transfer request, until after the card stops signals busy. From the fio testing data in cover letter, we can see the software queue can improve some performance with 4K block size, increasing about 16% for random read, increasing about 90% for random write, though no obvious improvement for sequential read and write. Moreover we can expand the software queue interface to support MMC packed request or packed command in future. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/4409c1586a9b3ed20d57ad2faf6c262fc3ccb6e2.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-02-12 12:12:56 +08:00
#include "mmc_hsq.h"
#define HSQ_NUM_SLOTS 64
#define HSQ_INVALID_TAG HSQ_NUM_SLOTS
static void mmc_hsq_retry_handler(struct work_struct *work)
{
struct mmc_hsq *hsq = container_of(work, struct mmc_hsq, retry_work);
struct mmc_host *mmc = hsq->mmc;
mmc->ops->request(mmc, hsq->mrq);
}
mmc: Add MMC host software queue support Now the MMC read/write stack will always wait for previous request is completed by mmc_blk_rw_wait(), before sending a new request to hardware, or queue a work to complete request, that will bring context switching overhead and spend some extra time to poll the card for busy completion for I/O writes via sending CMD13, especially for high I/O per second rates, to affect the IO performance. Thus this patch introduces MMC software queue interface based on the hardware command queue engine's interfaces, which is similar with the hardware command queue engine's idea, that can remove the context switching. Moreover we set the default queue depth as 64 for software queue, which allows more requests to be prepared, merged and inserted into IO scheduler to improve performance, but we only allow 2 requests in flight, that is enough to let the irq handler always trigger the next request without a context switch, as well as avoiding a long latency. Moreover the host controller should support HW busy detection for I/O operations when enabling the host software queue. That means, the host controller must not complete a data transfer request, until after the card stops signals busy. From the fio testing data in cover letter, we can see the software queue can improve some performance with 4K block size, increasing about 16% for random read, increasing about 90% for random write, though no obvious improvement for sequential read and write. Moreover we can expand the software queue interface to support MMC packed request or packed command in future. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/4409c1586a9b3ed20d57ad2faf6c262fc3ccb6e2.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-02-12 12:12:56 +08:00
static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)
{
struct mmc_host *mmc = hsq->mmc;
struct hsq_slot *slot;
unsigned long flags;
int ret = 0;
mmc: Add MMC host software queue support Now the MMC read/write stack will always wait for previous request is completed by mmc_blk_rw_wait(), before sending a new request to hardware, or queue a work to complete request, that will bring context switching overhead and spend some extra time to poll the card for busy completion for I/O writes via sending CMD13, especially for high I/O per second rates, to affect the IO performance. Thus this patch introduces MMC software queue interface based on the hardware command queue engine's interfaces, which is similar with the hardware command queue engine's idea, that can remove the context switching. Moreover we set the default queue depth as 64 for software queue, which allows more requests to be prepared, merged and inserted into IO scheduler to improve performance, but we only allow 2 requests in flight, that is enough to let the irq handler always trigger the next request without a context switch, as well as avoiding a long latency. Moreover the host controller should support HW busy detection for I/O operations when enabling the host software queue. That means, the host controller must not complete a data transfer request, until after the card stops signals busy. From the fio testing data in cover letter, we can see the software queue can improve some performance with 4K block size, increasing about 16% for random read, increasing about 90% for random write, though no obvious improvement for sequential read and write. Moreover we can expand the software queue interface to support MMC packed request or packed command in future. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/4409c1586a9b3ed20d57ad2faf6c262fc3ccb6e2.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-02-12 12:12:56 +08:00
spin_lock_irqsave(&hsq->lock, flags);
/* Make sure we are not already running a request now */
if (hsq->mrq) {
spin_unlock_irqrestore(&hsq->lock, flags);
return;
}
/* Make sure there are remain requests need to pump */
if (!hsq->qcnt || !hsq->enabled) {
spin_unlock_irqrestore(&hsq->lock, flags);
return;
}
slot = &hsq->slot[hsq->next_tag];
hsq->mrq = slot->mrq;
hsq->qcnt--;
spin_unlock_irqrestore(&hsq->lock, flags);
if (mmc->ops->request_atomic)
ret = mmc->ops->request_atomic(mmc, hsq->mrq);
else
mmc->ops->request(mmc, hsq->mrq);
/*
* If returning BUSY from request_atomic(), which means the card
* may be busy now, and we should change to non-atomic context to
* try again for this unusual case, to avoid time-consuming operations
* in the atomic context.
*
* Note: we just give a warning for other error cases, since the host
* driver will handle them.
*/
if (ret == -EBUSY)
schedule_work(&hsq->retry_work);
else
WARN_ON_ONCE(ret);
mmc: Add MMC host software queue support Now the MMC read/write stack will always wait for previous request is completed by mmc_blk_rw_wait(), before sending a new request to hardware, or queue a work to complete request, that will bring context switching overhead and spend some extra time to poll the card for busy completion for I/O writes via sending CMD13, especially for high I/O per second rates, to affect the IO performance. Thus this patch introduces MMC software queue interface based on the hardware command queue engine's interfaces, which is similar with the hardware command queue engine's idea, that can remove the context switching. Moreover we set the default queue depth as 64 for software queue, which allows more requests to be prepared, merged and inserted into IO scheduler to improve performance, but we only allow 2 requests in flight, that is enough to let the irq handler always trigger the next request without a context switch, as well as avoiding a long latency. Moreover the host controller should support HW busy detection for I/O operations when enabling the host software queue. That means, the host controller must not complete a data transfer request, until after the card stops signals busy. From the fio testing data in cover letter, we can see the software queue can improve some performance with 4K block size, increasing about 16% for random read, increasing about 90% for random write, though no obvious improvement for sequential read and write. Moreover we can expand the software queue interface to support MMC packed request or packed command in future. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/4409c1586a9b3ed20d57ad2faf6c262fc3ccb6e2.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-02-12 12:12:56 +08:00
}
static void mmc_hsq_update_next_tag(struct mmc_hsq *hsq, int remains)
{
struct hsq_slot *slot;
int tag;
/*
* If there are no remain requests in software queue, then set a invalid
* tag.
*/
if (!remains) {
hsq->next_tag = HSQ_INVALID_TAG;
return;
}
/*
* Increasing the next tag and check if the corresponding request is
* available, if yes, then we found a candidate request.
*/
if (++hsq->next_tag != HSQ_INVALID_TAG) {
slot = &hsq->slot[hsq->next_tag];
if (slot->mrq)
return;
}
/* Othersie we should iterate all slots to find a available tag. */
for (tag = 0; tag < HSQ_NUM_SLOTS; tag++) {
slot = &hsq->slot[tag];
if (slot->mrq)
break;
}
if (tag == HSQ_NUM_SLOTS)
tag = HSQ_INVALID_TAG;
hsq->next_tag = tag;
}
static void mmc_hsq_post_request(struct mmc_hsq *hsq)
{
unsigned long flags;
int remains;
spin_lock_irqsave(&hsq->lock, flags);
remains = hsq->qcnt;
hsq->mrq = NULL;
/* Update the next available tag to be queued. */
mmc_hsq_update_next_tag(hsq, remains);
if (hsq->waiting_for_idle && !remains) {
hsq->waiting_for_idle = false;
wake_up(&hsq->wait_queue);
}
/* Do not pump new request in recovery mode. */
if (hsq->recovery_halt) {
spin_unlock_irqrestore(&hsq->lock, flags);
return;
}
spin_unlock_irqrestore(&hsq->lock, flags);
/*
* Try to pump new request to host controller as fast as possible,
* after completing previous request.
*/
if (remains > 0)
mmc_hsq_pump_requests(hsq);
}
/**
* mmc_hsq_finalize_request - finalize one request if the request is done
* @mmc: the host controller
* @mrq: the request need to be finalized
*
* Return true if we finalized the corresponding request in software queue,
* otherwise return false.
*/
bool mmc_hsq_finalize_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct mmc_hsq *hsq = mmc->cqe_private;
unsigned long flags;
spin_lock_irqsave(&hsq->lock, flags);
if (!hsq->enabled || !hsq->mrq || hsq->mrq != mrq) {
spin_unlock_irqrestore(&hsq->lock, flags);
return false;
}
/*
* Clear current completed slot request to make a room for new request.
*/
hsq->slot[hsq->next_tag].mrq = NULL;
spin_unlock_irqrestore(&hsq->lock, flags);
mmc_cqe_request_done(mmc, hsq->mrq);
mmc_hsq_post_request(hsq);
return true;
}
EXPORT_SYMBOL_GPL(mmc_hsq_finalize_request);
static void mmc_hsq_recovery_start(struct mmc_host *mmc)
{
struct mmc_hsq *hsq = mmc->cqe_private;
unsigned long flags;
spin_lock_irqsave(&hsq->lock, flags);
hsq->recovery_halt = true;
spin_unlock_irqrestore(&hsq->lock, flags);
}
static void mmc_hsq_recovery_finish(struct mmc_host *mmc)
{
struct mmc_hsq *hsq = mmc->cqe_private;
int remains;
spin_lock_irq(&hsq->lock);
hsq->recovery_halt = false;
remains = hsq->qcnt;
spin_unlock_irq(&hsq->lock);
/*
* Try to pump new request if there are request pending in software
* queue after finishing recovery.
*/
if (remains > 0)
mmc_hsq_pump_requests(hsq);
}
static int mmc_hsq_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct mmc_hsq *hsq = mmc->cqe_private;
int tag = mrq->tag;
spin_lock_irq(&hsq->lock);
if (!hsq->enabled) {
spin_unlock_irq(&hsq->lock);
return -ESHUTDOWN;
}
/* Do not queue any new requests in recovery mode. */
if (hsq->recovery_halt) {
spin_unlock_irq(&hsq->lock);
return -EBUSY;
}
hsq->slot[tag].mrq = mrq;
/*
* Set the next tag as current request tag if no available
* next tag.
*/
if (hsq->next_tag == HSQ_INVALID_TAG)
hsq->next_tag = tag;
hsq->qcnt++;
spin_unlock_irq(&hsq->lock);
mmc_hsq_pump_requests(hsq);
return 0;
}
static void mmc_hsq_post_req(struct mmc_host *mmc, struct mmc_request *mrq)
{
if (mmc->ops->post_req)
mmc->ops->post_req(mmc, mrq, 0);
}
static bool mmc_hsq_queue_is_idle(struct mmc_hsq *hsq, int *ret)
{
bool is_idle;
spin_lock_irq(&hsq->lock);
is_idle = (!hsq->mrq && !hsq->qcnt) ||
hsq->recovery_halt;
*ret = hsq->recovery_halt ? -EBUSY : 0;
hsq->waiting_for_idle = !is_idle;
spin_unlock_irq(&hsq->lock);
return is_idle;
}
static int mmc_hsq_wait_for_idle(struct mmc_host *mmc)
{
struct mmc_hsq *hsq = mmc->cqe_private;
int ret;
wait_event(hsq->wait_queue,
mmc_hsq_queue_is_idle(hsq, &ret));
return ret;
}
static void mmc_hsq_disable(struct mmc_host *mmc)
{
struct mmc_hsq *hsq = mmc->cqe_private;
u32 timeout = 500;
int ret;
spin_lock_irq(&hsq->lock);
if (!hsq->enabled) {
spin_unlock_irq(&hsq->lock);
return;
}
spin_unlock_irq(&hsq->lock);
ret = wait_event_timeout(hsq->wait_queue,
mmc_hsq_queue_is_idle(hsq, &ret),
msecs_to_jiffies(timeout));
if (ret == 0) {
pr_warn("could not stop mmc software queue\n");
return;
}
spin_lock_irq(&hsq->lock);
hsq->enabled = false;
spin_unlock_irq(&hsq->lock);
}
static int mmc_hsq_enable(struct mmc_host *mmc, struct mmc_card *card)
{
struct mmc_hsq *hsq = mmc->cqe_private;
spin_lock_irq(&hsq->lock);
if (hsq->enabled) {
spin_unlock_irq(&hsq->lock);
return -EBUSY;
}
hsq->enabled = true;
spin_unlock_irq(&hsq->lock);
return 0;
}
static const struct mmc_cqe_ops mmc_hsq_ops = {
.cqe_enable = mmc_hsq_enable,
.cqe_disable = mmc_hsq_disable,
.cqe_request = mmc_hsq_request,
.cqe_post_req = mmc_hsq_post_req,
.cqe_wait_for_idle = mmc_hsq_wait_for_idle,
.cqe_recovery_start = mmc_hsq_recovery_start,
.cqe_recovery_finish = mmc_hsq_recovery_finish,
};
int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc)
{
hsq->num_slots = HSQ_NUM_SLOTS;
hsq->next_tag = HSQ_INVALID_TAG;
hsq->slot = devm_kcalloc(mmc_dev(mmc), hsq->num_slots,
sizeof(struct hsq_slot), GFP_KERNEL);
if (!hsq->slot)
return -ENOMEM;
hsq->mmc = mmc;
hsq->mmc->cqe_private = hsq;
mmc->cqe_ops = &mmc_hsq_ops;
INIT_WORK(&hsq->retry_work, mmc_hsq_retry_handler);
mmc: Add MMC host software queue support Now the MMC read/write stack will always wait for previous request is completed by mmc_blk_rw_wait(), before sending a new request to hardware, or queue a work to complete request, that will bring context switching overhead and spend some extra time to poll the card for busy completion for I/O writes via sending CMD13, especially for high I/O per second rates, to affect the IO performance. Thus this patch introduces MMC software queue interface based on the hardware command queue engine's interfaces, which is similar with the hardware command queue engine's idea, that can remove the context switching. Moreover we set the default queue depth as 64 for software queue, which allows more requests to be prepared, merged and inserted into IO scheduler to improve performance, but we only allow 2 requests in flight, that is enough to let the irq handler always trigger the next request without a context switch, as well as avoiding a long latency. Moreover the host controller should support HW busy detection for I/O operations when enabling the host software queue. That means, the host controller must not complete a data transfer request, until after the card stops signals busy. From the fio testing data in cover letter, we can see the software queue can improve some performance with 4K block size, increasing about 16% for random read, increasing about 90% for random write, though no obvious improvement for sequential read and write. Moreover we can expand the software queue interface to support MMC packed request or packed command in future. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/4409c1586a9b3ed20d57ad2faf6c262fc3ccb6e2.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-02-12 12:12:56 +08:00
spin_lock_init(&hsq->lock);
init_waitqueue_head(&hsq->wait_queue);
return 0;
}
EXPORT_SYMBOL_GPL(mmc_hsq_init);
void mmc_hsq_suspend(struct mmc_host *mmc)
{
mmc_hsq_disable(mmc);
}
EXPORT_SYMBOL_GPL(mmc_hsq_suspend);
int mmc_hsq_resume(struct mmc_host *mmc)
{
return mmc_hsq_enable(mmc, NULL);
}
EXPORT_SYMBOL_GPL(mmc_hsq_resume);
MODULE_DESCRIPTION("MMC Host Software Queue support");
MODULE_LICENSE("GPL v2");