linux/drivers/media/tuners/tda18212.c

276 lines
5.8 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 21:51:31 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* NXP TDA18212HN silicon tuner driver
*
* Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
*/
#include "tda18212.h"
#include <linux/regmap.h>
[media] tuners: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:66:1: warning: 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:98:1: warning: 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:90:1: warning: 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:92:1: warning: 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 17:07:42 +08:00
struct tda18212_dev {
struct tda18212_config cfg;
struct i2c_client *client;
struct regmap *regmap;
u32 if_frequency;
};
static int tda18212_set_params(struct dvb_frontend *fe)
{
struct tda18212_dev *dev = fe->tuner_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, i;
u32 if_khz;
u8 buf[9];
#define DVBT_6 0
#define DVBT_7 1
#define DVBT_8 2
#define DVBT2_6 3
#define DVBT2_7 4
#define DVBT2_8 5
#define DVBC_6 6
#define DVBC_8 7
#define ATSC_VSB 8
#define ATSC_QAM 9
static const u8 bw_params[][3] = {
/* reg: 0f 13 23 */
[DVBT_6] = { 0xb3, 0x20, 0x03 },
[DVBT_7] = { 0xb3, 0x31, 0x01 },
[DVBT_8] = { 0xb3, 0x22, 0x01 },
[DVBT2_6] = { 0xbc, 0x20, 0x03 },
[DVBT2_7] = { 0xbc, 0x72, 0x03 },
[DVBT2_8] = { 0xbc, 0x22, 0x01 },
[DVBC_6] = { 0x92, 0x50, 0x03 },
[DVBC_8] = { 0x92, 0x53, 0x03 },
[ATSC_VSB] = { 0x7d, 0x20, 0x63 },
[ATSC_QAM] = { 0x7d, 0x20, 0x63 },
};
dev_dbg(&dev->client->dev,
"delivery_system=%d frequency=%d bandwidth_hz=%d\n",
c->delivery_system, c->frequency,
c->bandwidth_hz);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
switch (c->delivery_system) {
case SYS_ATSC:
if_khz = dev->cfg.if_atsc_vsb;
i = ATSC_VSB;
break;
case SYS_DVBC_ANNEX_B:
if_khz = dev->cfg.if_atsc_qam;
i = ATSC_QAM;
break;
case SYS_DVBT:
switch (c->bandwidth_hz) {
case 6000000:
if_khz = dev->cfg.if_dvbt_6;
i = DVBT_6;
break;
case 7000000:
if_khz = dev->cfg.if_dvbt_7;
i = DVBT_7;
break;
case 8000000:
if_khz = dev->cfg.if_dvbt_8;
i = DVBT_8;
break;
default:
ret = -EINVAL;
goto error;
}
break;
case SYS_DVBT2:
switch (c->bandwidth_hz) {
case 6000000:
if_khz = dev->cfg.if_dvbt2_6;
i = DVBT2_6;
break;
case 7000000:
if_khz = dev->cfg.if_dvbt2_7;
i = DVBT2_7;
break;
case 8000000:
if_khz = dev->cfg.if_dvbt2_8;
i = DVBT2_8;
break;
default:
ret = -EINVAL;
goto error;
}
break;
case SYS_DVBC_ANNEX_A:
case SYS_DVBC_ANNEX_C:
if_khz = dev->cfg.if_dvbc;
i = DVBC_8;
break;
default:
ret = -EINVAL;
goto error;
}
ret = regmap_write(dev->regmap, 0x23, bw_params[i][2]);
if (ret)
goto error;
ret = regmap_write(dev->regmap, 0x06, 0x00);
if (ret)
goto error;
ret = regmap_write(dev->regmap, 0x0f, bw_params[i][0]);
if (ret)
goto error;
buf[0] = 0x02;
buf[1] = bw_params[i][1];
buf[2] = 0x03; /* default value */
buf[3] = DIV_ROUND_CLOSEST(if_khz, 50);
buf[4] = ((c->frequency / 1000) >> 16) & 0xff;
buf[5] = ((c->frequency / 1000) >> 8) & 0xff;
buf[6] = ((c->frequency / 1000) >> 0) & 0xff;
buf[7] = 0xc1;
buf[8] = 0x01;
ret = regmap_bulk_write(dev->regmap, 0x12, buf, sizeof(buf));
if (ret)
goto error;
/* actual IF rounded as it is on register */
dev->if_frequency = buf[3] * 50 * 1000;
exit:
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
return ret;
error:
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
goto exit;
}
static int tda18212_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct tda18212_dev *dev = fe->tuner_priv;
*frequency = dev->if_frequency;
return 0;
}
static const struct dvb_tuner_ops tda18212_tuner_ops = {
.info = {
.name = "NXP TDA18212",
.frequency_min_hz = 48 * MHz,
.frequency_max_hz = 864 * MHz,
.frequency_step_hz = 1 * kHz,
},
.set_params = tda18212_set_params,
.get_if_frequency = tda18212_get_if_frequency,
};
static int tda18212_probe(struct i2c_client *client)
{
struct tda18212_config *cfg = client->dev.platform_data;
struct dvb_frontend *fe = cfg->fe;
struct tda18212_dev *dev;
int ret;
unsigned int chip_id;
char *version;
static const struct regmap_config regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
ret = -ENOMEM;
dev_err(&client->dev, "kzalloc() failed\n");
goto err;
}
memcpy(&dev->cfg, cfg, sizeof(struct tda18212_config));
dev->client = client;
dev->regmap = devm_regmap_init_i2c(client, &regmap_config);
if (IS_ERR(dev->regmap)) {
ret = PTR_ERR(dev->regmap);
goto err;
}
/* check if the tuner is there */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
ret = regmap_read(dev->regmap, 0x00, &chip_id);
dev_dbg(&dev->client->dev, "chip_id=%02x\n", chip_id);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
if (ret)
goto err;
switch (chip_id) {
case 0xc7:
version = "M"; /* master */
break;
case 0x47:
version = "S"; /* slave */
break;
default:
ret = -ENODEV;
goto err;
}
dev_info(&dev->client->dev,
"NXP TDA18212HN/%s successfully identified\n", version);
fe->tuner_priv = dev;
memcpy(&fe->ops.tuner_ops, &tda18212_tuner_ops,
sizeof(struct dvb_tuner_ops));
i2c_set_clientdata(client, dev);
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
kfree(dev);
return ret;
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 16:02:30 +08:00
static void tda18212_remove(struct i2c_client *client)
{
struct tda18212_dev *dev = i2c_get_clientdata(client);
struct dvb_frontend *fe = dev->cfg.fe;
dev_dbg(&client->dev, "\n");
memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops));
fe->tuner_priv = NULL;
kfree(dev);
}
static const struct i2c_device_id tda18212_id[] = {
{"tda18212", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, tda18212_id);
static struct i2c_driver tda18212_driver = {
.driver = {
.name = "tda18212",
},
.probe_new = tda18212_probe,
.remove = tda18212_remove,
.id_table = tda18212_id,
};
module_i2c_driver(tda18212_driver);
MODULE_DESCRIPTION("NXP TDA18212HN silicon tuner driver");
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_LICENSE("GPL");