linux/drivers/gpu/drm/i915/intel_device_info.h

255 lines
6.2 KiB
C
Raw Normal View History

/*
* Copyright © 2014-2017 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#ifndef _INTEL_DEVICE_INFO_H_
#define _INTEL_DEVICE_INFO_H_
#include <uapi/drm/i915_drm.h>
#include "intel_step.h"
#include "display/intel_display.h"
#include "gt/intel_engine_types.h"
#include "gt/intel_context_types.h"
#include "gt/intel_sseu.h"
struct drm_printer;
struct drm_i915_private;
/* Keep in gen based order, and chronological order within a gen */
enum intel_platform {
INTEL_PLATFORM_UNINITIALIZED = 0,
/* gen2 */
INTEL_I830,
INTEL_I845G,
INTEL_I85X,
INTEL_I865G,
/* gen3 */
INTEL_I915G,
INTEL_I915GM,
INTEL_I945G,
INTEL_I945GM,
INTEL_G33,
INTEL_PINEVIEW,
/* gen4 */
INTEL_I965G,
INTEL_I965GM,
INTEL_G45,
INTEL_GM45,
/* gen5 */
INTEL_IRONLAKE,
/* gen6 */
INTEL_SANDYBRIDGE,
/* gen7 */
INTEL_IVYBRIDGE,
INTEL_VALLEYVIEW,
INTEL_HASWELL,
/* gen8 */
INTEL_BROADWELL,
INTEL_CHERRYVIEW,
/* gen9 */
INTEL_SKYLAKE,
INTEL_BROXTON,
INTEL_KABYLAKE,
INTEL_GEMINILAKE,
INTEL_COFFEELAKE,
INTEL_COMETLAKE,
/* gen10 */
INTEL_CANNONLAKE,
/* gen11 */
INTEL_ICELAKE,
INTEL_ELKHARTLAKE,
INTEL_JASPERLAKE,
/* gen12 */
INTEL_TIGERLAKE,
INTEL_ROCKETLAKE,
INTEL_DG1,
drm/i915/adl_s: Add ADL-S platform info and PCI ids - Add the initial platform information for Alderlake-S. - Specify ppgtt_size value - Add dma_mask_size - Add ADLS REVIDs - HW tracking(Selective Update Tracking Enable) has been removed from ADLS. Disable PSR2 till we enable software/ manual tracking. v2: - Add support for different ADLS SOC steppings to select correct GT/DISP stepping based on Bspec 53655 based on feedback from Matt Roper.(aswarup) v3: - Make display/gt steppings info generic for reuse with TGL and ADLS. - Modify the macros to reuse tgl_revids_get() - Add HTI support to adls device info.(mdroper) v4: - Rebase on TGL patch for applying WAs based on stepping info from Matt Roper's feedback.(aswarup) v5: - Replace macros with PCI IDs in revid to stepping table. v6: remove stray adls_revids (Lucas) Bspec: 53597 Bspec: 53648 Bspec: 53655 Bspec: 48028 Bspec: 53650 BSpec: 50422 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210119192931.1116500-2-lucas.demarchi@intel.com
2021-01-20 03:29:31 +08:00
INTEL_ALDERLAKE_S,
INTEL_MAX_PLATFORMS
};
drm/i915: Introduce concept of a sub-platform Concept of a sub-platform already exist in our code (like ULX and ULT platform variants and similar),implemented via the macros which check a list of device ids to determine a match. With this patch we consolidate device ids checking into a single function called during early driver load. A few low bits in the platform mask are reserved for sub-platform identification and defined as a per-platform namespace. At the same time it future proofs the platform_mask handling by preparing the code for easy extending, and tidies the very verbose WARN strings generated when IS_PLATFORM macros are embedded into a WARN type statements. v2: Fixed IS_SUBPLATFORM. Updated commit msg. v3: Chris was right, there is an ordering problem. v4: * Catch-up with new sub-platforms. * Rebase for RUNTIME_INFO. * Drop subplatform mask union tricks and convert platform_mask to an array for extensibility. v5: * Fix subplatform check. * Protect against forgetting to expand subplatform bits. * Remove platform enum tallying. * Add subplatform to error state. (Chris) * Drop macros and just use static inlines. * Remove redundant IRONLAKE_M. (Ville) v6: * Split out Ironlake change. * Optimize subplatform check. * Use __always_inline. (Lucas) * Add platform_mask comment. (Paulo) * Pass stored runtime info in error capture. (Chris) v7: * Rebased for new AML ULX device id. * Bump platform mask array size for EHL. * Stop mentioning device ids in intel_device_subplatform_init by using the trick of splitting macros i915_pciids.h. (Jani) * AML seems to be either a subplatform of KBL or CFL so express it like that. v8: * Use one device id table per subplatform. (Jani) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jose Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190327142328.31780-1-tvrtko.ursulin@linux.intel.com
2019-03-27 22:23:28 +08:00
/*
* Subplatform bits share the same namespace per parent platform. In other words
* it is fine for the same bit to be used on multiple parent platforms.
*/
#define INTEL_SUBPLATFORM_BITS (2)
#define INTEL_SUBPLATFORM_MASK (BIT(INTEL_SUBPLATFORM_BITS) - 1)
drm/i915: Introduce concept of a sub-platform Concept of a sub-platform already exist in our code (like ULX and ULT platform variants and similar),implemented via the macros which check a list of device ids to determine a match. With this patch we consolidate device ids checking into a single function called during early driver load. A few low bits in the platform mask are reserved for sub-platform identification and defined as a per-platform namespace. At the same time it future proofs the platform_mask handling by preparing the code for easy extending, and tidies the very verbose WARN strings generated when IS_PLATFORM macros are embedded into a WARN type statements. v2: Fixed IS_SUBPLATFORM. Updated commit msg. v3: Chris was right, there is an ordering problem. v4: * Catch-up with new sub-platforms. * Rebase for RUNTIME_INFO. * Drop subplatform mask union tricks and convert platform_mask to an array for extensibility. v5: * Fix subplatform check. * Protect against forgetting to expand subplatform bits. * Remove platform enum tallying. * Add subplatform to error state. (Chris) * Drop macros and just use static inlines. * Remove redundant IRONLAKE_M. (Ville) v6: * Split out Ironlake change. * Optimize subplatform check. * Use __always_inline. (Lucas) * Add platform_mask comment. (Paulo) * Pass stored runtime info in error capture. (Chris) v7: * Rebased for new AML ULX device id. * Bump platform mask array size for EHL. * Stop mentioning device ids in intel_device_subplatform_init by using the trick of splitting macros i915_pciids.h. (Jani) * AML seems to be either a subplatform of KBL or CFL so express it like that. v8: * Use one device id table per subplatform. (Jani) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jose Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190327142328.31780-1-tvrtko.ursulin@linux.intel.com
2019-03-27 22:23:28 +08:00
/* HSW/BDW/SKL/KBL/CFL */
#define INTEL_SUBPLATFORM_ULT (0)
#define INTEL_SUBPLATFORM_ULX (1)
/* CNL/ICL */
#define INTEL_SUBPLATFORM_PORTF (0)
enum intel_ppgtt_type {
INTEL_PPGTT_NONE = I915_GEM_PPGTT_NONE,
INTEL_PPGTT_ALIASING = I915_GEM_PPGTT_ALIASING,
INTEL_PPGTT_FULL = I915_GEM_PPGTT_FULL,
};
#define DEV_INFO_FOR_EACH_FLAG(func) \
func(is_mobile); \
func(is_lp); \
func(require_force_probe); \
func(is_dgfx); \
/* Keep has_* in alphabetical order */ \
func(has_64bit_reloc); \
func(gpu_reset_clobbers_display); \
func(has_reset_engine); \
func(has_global_mocs); \
func(has_gt_uc); \
func(has_l3_dpf); \
func(has_llc); \
func(has_logical_ring_contexts); \
drm/i915/icl: Enhanced execution list support Enhanced Execlists is an upgraded version of execlists which supports up to 8 ports. The lrcs to be submitted are written to a submit queue (the ExecLists Submission Queue - ELSQ), which is then loaded on the HW. When writing to the ELSP register, the lrcs are written cyclically in the queue from position 0 to position 7. Alternatively, it is possible to write directly in the individual positions of the queue using the ELSQC registers. To be able to re-use all the existing code we're using the latter method and we're currently limiting ourself to only using 2 elements. v2: Rebase. v3: Switch from !IS_GEN11 to GEN < 11 (Daniele Ceraolo Spurio). v4: Use the elsq registers instead of elsp. (Daniele Ceraolo Spurio) v5: Reword commit, rename regs to be closer to specs, turn off preemption (Daniele), reuse engine->execlists.elsp (Chris) v6: use has_logical_ring_elsq to differentiate the new paths v7: add preemption support, rename els to submit_reg (Chris) v8: save the ctrl register inside the execlists struct, drop CSB handling updates (superseded by preempt_complete_status) (Chris) v9: s/drm_i915_gem_request/i915_request (Mika) v10: resolved conflict in inject_preempt_context (Mika) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-4-mika.kuoppala@linux.intel.com
2018-03-03 00:14:59 +08:00
func(has_logical_ring_elsq); \
func(has_master_unit_irq); \
func(has_pooled_eu); \
func(has_rc6); \
func(has_rc6p); \
func(has_rps); \
func(has_runtime_pm); \
func(has_snoop); \
func(has_coherent_ggtt); \
func(unfenced_needs_alignment); \
func(hws_needs_physical);
#define DEV_INFO_DISPLAY_FOR_EACH_FLAG(func) \
/* Keep in alphabetical order */ \
func(cursor_needs_physical); \
func(has_csr); \
func(has_ddi); \
func(has_dp_mst); \
func(has_dsb); \
func(has_dsc); \
func(has_fbc); \
func(has_fpga_dbg); \
func(has_gmch); \
func(has_hdcp); \
func(has_hotplug); \
func(has_hti); \
func(has_ipc); \
drm/i915: Add modular FIA Some platforms may have Modular FIA. If Modular FIA is used in the SOC, then Display Driver will access the additional instances of FIA based on pre-assigned offset in GTTMADDR space. Each Modular FIA instance has its own IOSF Sideband Port ID and it houses only 2 Type-C Port. In SOC that has more than two Type-C Ports, there are multiple instances of Modular FIA. Gunit will need to use different destination ID when it access different pair of Type-C Port. The DFLEXDPSP register has Modular FIA bit starting on Tiger Lake. If Modular FIA is used in the SOC, this register bit exists in all the instances of Modular FIA. IOM FW is required to program only the MF bit in first FIA instance that houses the Type-C Port 0 and Port 1, for Display Driver to read from. v2 (Lucas): - Move all accesses to FIA to be contained in intel_tc.c, along with display_fia that is now called tc_phy_fia - Save the fia instance number on intel_digital_port, so we don't have to query if modular FIA is used on every access v3 (Lucas): Make function static v4 (Lucas): Move enum phy_fia to the header and use it in intel_digital_port (suggested by Ville) v5 (Lucas): Add comment about the mapping between FIA and TC port (suggested by Stuart) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712055706.12143-2-lucas.demarchi@intel.com
2019-07-12 13:57:05 +08:00
func(has_modular_fia); \
func(has_overlay); \
func(has_psr); \
func(has_psr_hw_tracking); \
func(overlay_needs_physical); \
func(supports_tv);
struct intel_device_info {
u16 gen_mask;
u8 gen;
u8 gt; /* GT number, 0 if undefined */
intel_engine_mask_t platform_engine_mask; /* Engines supported by the HW */
enum intel_platform platform;
unsigned int dma_mask_size; /* available DMA address bits */
enum intel_ppgtt_type ppgtt_type;
unsigned int ppgtt_size; /* log2, e.g. 31/32/48 bits */
unsigned int page_sizes; /* page sizes supported by the HW */
u32 memory_regions; /* regions supported by the HW */
u32 display_mmio_offset;
u8 pipe_mask;
u8 cpu_transcoder_mask;
u8 abox_mask;
#define DEFINE_FLAG(name) u8 name:1
DEV_INFO_FOR_EACH_FLAG(DEFINE_FLAG);
#undef DEFINE_FLAG
struct {
u8 ver;
drm/i915: Add DISPLAY_VER() and related macros Although we've long referred to platforms by a single "GEN" number, the hardware teams have recommended that we stop doing this since the various component IP blocks are going to start using independent number schemes with varying cadence. To support this, hardware platforms a bit down the road are going to start providing MMIO registers that the driver can read to obtain the "graphics version," "media version," and "display version" without needing to do a PCI ID -> platform -> version translation. Although our current platforms don't yet expose these registers (and the next couple we release probably won't have them yet either), the hardware teams would still like to see us move to this independent numbering scheme now in preparation. For i915 that means we should try to eliminate all usage of INTEL_GEN() throughout our code and instead replace it with separate GRAPHICS_VER(), MEDIA_VER(), and DISPLAY_VER() constructs in the code. For old platforms, these will all usually give the same value for each IP block (aside from a few special cases like GLK which we can no more accurately represent as graphics=9 + display=10), but future platforms will have more flexibility to bump IP version numbers independently. The upcoming ADL-P platform will have a display version of 13 and a graphics version of 12, so let's just the first step of breaking out DISPLAY_VER(), but leaving the rest of INTEL_GEN() untouched for now. For now we'll automatically derive the display version from the platform's INTEL_GEN() value except in cases where an alternative display version is explicitly provided in the device info structure. We also add some helper macros IS_DISPLAY_VER(i915, ver) and IS_DISPLAY_RANGE(i915, from, until) that match the behavior of the existing gen-based macros. However unlike IS_GEN(), we will implement those macros with direct comparisons rather than trying to maintain a mask to help compiler optimization. In practice the optimization winds up not being used in very many places (since the vast majority of our platform checks are of the form "gen >= x") so there is pretty minimal size reduction in the final driver binary[1]. We're also likely going to need to extend these version numbers to non-integer major.minor values at some point in the future, so the mask approach won't work at all once we get to platforms like that. [1] The results before/after the next patch in this series, which switches our code over to the new display macros: $ size i915.ko.{orig,new} text data bss dec hex filename 2940291 102944 5384 3048619 2e84ab i915.ko.orig 2940723 102956 5384 3049063 2e8667 i915.ko.new v2: - Move version into device info's display sub-struct. (Jani) - Add extra parentheses to macros. (Jani) - Note the lack of genmask optimization in the display-based macros and give size data. (Lucas) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-3-matthew.d.roper@intel.com
2021-03-20 12:42:41 +08:00
#define DEFINE_FLAG(name) u8 name:1
DEV_INFO_DISPLAY_FOR_EACH_FLAG(DEFINE_FLAG);
#undef DEFINE_FLAG
} display;
u16 ddb_size; /* in blocks */
drm/i915: Manipulate DBuf slices properly Start manipulating DBuf slices as a mask, but not as a total number, as current approach doesn't give us full control on all combinations of slices, which we might need(like enabling S2 only can't enabled by setting enabled_slices=1). Removed wrong code from intel_get_ddb_size as it doesn't match to BSpec. For now still just use DBuf slice until proper algorithm is implemented. Other minor code refactoring to get prepared for major DBuf assignment changes landed: - As now enabled slices contain a mask we still need some value which should reflect how much DBuf slices are supported by the platform, now device info contains num_supported_dbuf_slices. - Removed unneeded assertion as we are now manipulating slices in a more proper way. v2: Start using enabled_slices in dev_priv v3: "enabled_slices" is now "enabled_dbuf_slices_mask", as this now sits in dev_priv independently. v4: - Fixed debug print formatting to hex(Matt Roper) - Optimized dbuf slice updates to be used only if slice union is different from current conf(Matt Roper) - Fixed some functions to be static(Matt Roper) - Created a parameterized version for DBUF_CTL to simplify DBuf programming cycle(Matt Roper) - Removed unrequred field from GEN10_FEATURES(Matt Roper) v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä) - Started to use parameterized loop for hw readout to get slices (Ville Syrjälä) - Added back assertion checking amount of DBUF slices enabled after DC states 5/6 transition, also added new assertion as starting from ICL DMC seems to restore the last DBuf power state set, rather than power up all dbuf slices as assertion was previously expecting(Ville Syrjälä) v6: - Now using enum for DBuf slices in this patch (Ville Syrjälä) - Removed gen11_assert_dbuf_enabled and put gen9_assert_dbuf_enabled back, as we really need to have a single unified assert here however currently enabling always slice 1 is enforced by BSpec, so we will have to OR enabled slices mask with 1 in order to be consistent with BSpec, that way we can unify that assertion and against the actual state from the driver, but not some hardcoded value.(concluded with Ville) - Remove parameterized DBUF_CTL version, to extract it to another patch.(Ville Syrjälä) v7: - Removed unneeded hardcoded return value for older gens from intel_enabled_dbuf_slices_mask - this now is handled in a unified manner since device info anyway returns max dbuf slices as 1 for older platforms(Matthew Roper) - Now using INTEL_INFO(dev_priv)->num_supported_dbuf_slices instead of intel_dbuf_max_slices function as it is trivial(Matthew Roper) v8: - Fixed icl_dbuf_disable to disable all dbufs still(Ville Syrjälä) v9: - Renamed _DBUF_CTL_S to DBUF_CTL_S(Ville Syrjälä) - Now using power_domain mutex to protect from race condition, which can occur because intel_dbuf_slices_update might be running in parallel to gen9_dc_off_power_well_enable being called from intel_dp_detect for instance, which causes assertion triggered by race condition, as gen9_assert_dbuf_enabled might preempt this when registers were already updated, while dev_priv was not. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-6-stanislav.lisovskiy@intel.com
2020-02-03 07:06:29 +08:00
u8 num_supported_dbuf_slices; /* number of DBuf slices */
/* Register offsets for the various display pipes and transcoders */
int pipe_offsets[I915_MAX_TRANSCODERS];
int trans_offsets[I915_MAX_TRANSCODERS];
int cursor_offsets[I915_MAX_PIPES];
struct color_luts {
u32 degamma_lut_size;
u32 gamma_lut_size;
u32 degamma_lut_tests;
u32 gamma_lut_tests;
} color;
};
struct intel_runtime_info {
drm/i915: Introduce concept of a sub-platform Concept of a sub-platform already exist in our code (like ULX and ULT platform variants and similar),implemented via the macros which check a list of device ids to determine a match. With this patch we consolidate device ids checking into a single function called during early driver load. A few low bits in the platform mask are reserved for sub-platform identification and defined as a per-platform namespace. At the same time it future proofs the platform_mask handling by preparing the code for easy extending, and tidies the very verbose WARN strings generated when IS_PLATFORM macros are embedded into a WARN type statements. v2: Fixed IS_SUBPLATFORM. Updated commit msg. v3: Chris was right, there is an ordering problem. v4: * Catch-up with new sub-platforms. * Rebase for RUNTIME_INFO. * Drop subplatform mask union tricks and convert platform_mask to an array for extensibility. v5: * Fix subplatform check. * Protect against forgetting to expand subplatform bits. * Remove platform enum tallying. * Add subplatform to error state. (Chris) * Drop macros and just use static inlines. * Remove redundant IRONLAKE_M. (Ville) v6: * Split out Ironlake change. * Optimize subplatform check. * Use __always_inline. (Lucas) * Add platform_mask comment. (Paulo) * Pass stored runtime info in error capture. (Chris) v7: * Rebased for new AML ULX device id. * Bump platform mask array size for EHL. * Stop mentioning device ids in intel_device_subplatform_init by using the trick of splitting macros i915_pciids.h. (Jani) * AML seems to be either a subplatform of KBL or CFL so express it like that. v8: * Use one device id table per subplatform. (Jani) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jose Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190327142328.31780-1-tvrtko.ursulin@linux.intel.com
2019-03-27 22:23:28 +08:00
/*
* Platform mask is used for optimizing or-ed IS_PLATFORM calls into
* into single runtime conditionals, and also to provide groundwork
* for future per platform, or per SKU build optimizations.
*
* Array can be extended when necessary if the corresponding
* BUILD_BUG_ON is hit.
*/
u32 platform_mask[2];
u16 device_id;
u8 num_sprites[I915_MAX_PIPES];
u8 num_scalers[I915_MAX_PIPES];
u32 rawclk_freq;
struct intel_step_info step;
};
struct intel_driver_caps {
unsigned int scheduler;
bool has_logical_contexts:1;
};
const char *intel_platform_name(enum intel_platform platform);
drm/i915: Introduce concept of a sub-platform Concept of a sub-platform already exist in our code (like ULX and ULT platform variants and similar),implemented via the macros which check a list of device ids to determine a match. With this patch we consolidate device ids checking into a single function called during early driver load. A few low bits in the platform mask are reserved for sub-platform identification and defined as a per-platform namespace. At the same time it future proofs the platform_mask handling by preparing the code for easy extending, and tidies the very verbose WARN strings generated when IS_PLATFORM macros are embedded into a WARN type statements. v2: Fixed IS_SUBPLATFORM. Updated commit msg. v3: Chris was right, there is an ordering problem. v4: * Catch-up with new sub-platforms. * Rebase for RUNTIME_INFO. * Drop subplatform mask union tricks and convert platform_mask to an array for extensibility. v5: * Fix subplatform check. * Protect against forgetting to expand subplatform bits. * Remove platform enum tallying. * Add subplatform to error state. (Chris) * Drop macros and just use static inlines. * Remove redundant IRONLAKE_M. (Ville) v6: * Split out Ironlake change. * Optimize subplatform check. * Use __always_inline. (Lucas) * Add platform_mask comment. (Paulo) * Pass stored runtime info in error capture. (Chris) v7: * Rebased for new AML ULX device id. * Bump platform mask array size for EHL. * Stop mentioning device ids in intel_device_subplatform_init by using the trick of splitting macros i915_pciids.h. (Jani) * AML seems to be either a subplatform of KBL or CFL so express it like that. v8: * Use one device id table per subplatform. (Jani) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jose Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190327142328.31780-1-tvrtko.ursulin@linux.intel.com
2019-03-27 22:23:28 +08:00
void intel_device_info_subplatform_init(struct drm_i915_private *dev_priv);
void intel_device_info_runtime_init(struct drm_i915_private *dev_priv);
void intel_device_info_print_static(const struct intel_device_info *info,
struct drm_printer *p);
void intel_device_info_print_runtime(const struct intel_runtime_info *info,
struct drm_printer *p);
void intel_driver_caps_print(const struct intel_driver_caps *caps,
struct drm_printer *p);
#endif