linux/Documentation/video4linux/cx18.txt

37 lines
1.2 KiB
Plaintext
Raw Normal View History

Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
encoder chip:
1) The only hardware currently supported is the Hauppauge HVR-1600
card and the Compro VideoMate H900 (note that this card only
supports analog input, it has no digital tuner!).
2) Some people have problems getting the i2c bus to work. Cause unknown.
The symptom is that the eeprom cannot be read and the card is
unusable.
3) The audio from the analog tuner is mono only. Probably caused by
incorrect audio register information in the datasheet. We are
waiting for updated information from Conexant.
4) VBI (raw or sliced) has not yet been implemented.
5) MPEG indexing is not yet implemented.
6) The driver is still a bit rough around the edges, this should
improve over time.
Firmware:
The firmware needs to be extracted from the Windows Hauppauge HVR-1600
driver, available here:
http://hauppauge.lightpath.net/software/install_cd/hauppauge_cd_3.4d1.zip
Unzip, then copy the following files to the firmware directory
and rename them as follows:
Drivers/Driver18/hcw18apu.rom -> v4l-cx23418-apu.fw
Drivers/Driver18/hcw18enc.rom -> v4l-cx23418-cpu.fw
Drivers/Driver18/hcw18mlC.rom -> v4l-cx23418-dig.fw