2019-05-29 22:18:02 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2016-09-05 13:06:10 +08:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd.
|
|
|
|
* Author: Lin Huang <hl@rock-chips.com>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/arm-smccc.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/devfreq.h>
|
|
|
|
#include <linux/devfreq-event.h>
|
|
|
|
#include <linux/interrupt.h>
|
2019-03-22 07:14:38 +08:00
|
|
|
#include <linux/mfd/syscon.h>
|
2016-09-05 13:06:10 +08:00
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/pm_opp.h>
|
2019-03-22 07:14:38 +08:00
|
|
|
#include <linux/regmap.h>
|
2016-09-05 13:06:10 +08:00
|
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <linux/rwsem.h>
|
|
|
|
#include <linux/suspend.h>
|
|
|
|
|
2019-03-22 07:14:38 +08:00
|
|
|
#include <soc/rockchip/rk3399_grf.h>
|
2016-09-05 13:06:10 +08:00
|
|
|
#include <soc/rockchip/rockchip_sip.h>
|
|
|
|
|
|
|
|
struct dram_timing {
|
|
|
|
unsigned int ddr3_speed_bin;
|
|
|
|
unsigned int pd_idle;
|
|
|
|
unsigned int sr_idle;
|
|
|
|
unsigned int sr_mc_gate_idle;
|
|
|
|
unsigned int srpd_lite_idle;
|
|
|
|
unsigned int standby_idle;
|
|
|
|
unsigned int auto_pd_dis_freq;
|
|
|
|
unsigned int dram_dll_dis_freq;
|
|
|
|
unsigned int phy_dll_dis_freq;
|
|
|
|
unsigned int ddr3_odt_dis_freq;
|
|
|
|
unsigned int ddr3_drv;
|
|
|
|
unsigned int ddr3_odt;
|
|
|
|
unsigned int phy_ddr3_ca_drv;
|
|
|
|
unsigned int phy_ddr3_dq_drv;
|
|
|
|
unsigned int phy_ddr3_odt;
|
|
|
|
unsigned int lpddr3_odt_dis_freq;
|
|
|
|
unsigned int lpddr3_drv;
|
|
|
|
unsigned int lpddr3_odt;
|
|
|
|
unsigned int phy_lpddr3_ca_drv;
|
|
|
|
unsigned int phy_lpddr3_dq_drv;
|
|
|
|
unsigned int phy_lpddr3_odt;
|
|
|
|
unsigned int lpddr4_odt_dis_freq;
|
|
|
|
unsigned int lpddr4_drv;
|
|
|
|
unsigned int lpddr4_dq_odt;
|
|
|
|
unsigned int lpddr4_ca_odt;
|
|
|
|
unsigned int phy_lpddr4_ca_drv;
|
|
|
|
unsigned int phy_lpddr4_ck_cs_drv;
|
|
|
|
unsigned int phy_lpddr4_dq_drv;
|
|
|
|
unsigned int phy_lpddr4_odt;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct rk3399_dmcfreq {
|
|
|
|
struct device *dev;
|
|
|
|
struct devfreq *devfreq;
|
|
|
|
struct devfreq_simple_ondemand_data ondemand_data;
|
|
|
|
struct clk *dmc_clk;
|
|
|
|
struct devfreq_event_dev *edev;
|
|
|
|
struct mutex lock;
|
|
|
|
struct dram_timing timing;
|
|
|
|
struct regulator *vdd_center;
|
2019-03-22 07:14:38 +08:00
|
|
|
struct regmap *regmap_pmu;
|
2016-09-05 13:06:10 +08:00
|
|
|
unsigned long rate, target_rate;
|
|
|
|
unsigned long volt, target_volt;
|
2019-03-22 07:14:38 +08:00
|
|
|
unsigned int odt_dis_freq;
|
|
|
|
int odt_pd_arg0, odt_pd_arg1;
|
2016-09-05 13:06:10 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
|
|
|
|
u32 flags)
|
|
|
|
{
|
|
|
|
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev);
|
|
|
|
struct dev_pm_opp *opp;
|
|
|
|
unsigned long old_clk_rate = dmcfreq->rate;
|
|
|
|
unsigned long target_volt, target_rate;
|
2019-03-22 07:14:38 +08:00
|
|
|
struct arm_smccc_res res;
|
|
|
|
bool odt_enable = false;
|
2016-09-05 13:06:10 +08:00
|
|
|
int err;
|
|
|
|
|
|
|
|
opp = devfreq_recommended_opp(dev, freq, flags);
|
2017-01-23 12:41:47 +08:00
|
|
|
if (IS_ERR(opp))
|
2016-09-05 13:06:10 +08:00
|
|
|
return PTR_ERR(opp);
|
|
|
|
|
|
|
|
target_rate = dev_pm_opp_get_freq(opp);
|
|
|
|
target_volt = dev_pm_opp_get_voltage(opp);
|
2017-01-23 12:41:47 +08:00
|
|
|
dev_pm_opp_put(opp);
|
2016-09-05 13:06:10 +08:00
|
|
|
|
|
|
|
if (dmcfreq->rate == target_rate)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
mutex_lock(&dmcfreq->lock);
|
|
|
|
|
2020-06-30 18:05:46 +08:00
|
|
|
if (dmcfreq->regmap_pmu) {
|
|
|
|
if (target_rate >= dmcfreq->odt_dis_freq)
|
|
|
|
odt_enable = true;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This makes a SMC call to the TF-A to set the DDR PD
|
|
|
|
* (power-down) timings and to enable or disable the
|
|
|
|
* ODT (on-die termination) resistors.
|
|
|
|
*/
|
|
|
|
arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, dmcfreq->odt_pd_arg0,
|
|
|
|
dmcfreq->odt_pd_arg1,
|
|
|
|
ROCKCHIP_SIP_CONFIG_DRAM_SET_ODT_PD,
|
|
|
|
odt_enable, 0, 0, 0, &res);
|
|
|
|
}
|
2019-03-22 07:14:38 +08:00
|
|
|
|
2016-09-05 13:06:10 +08:00
|
|
|
/*
|
|
|
|
* If frequency scaling from low to high, adjust voltage first.
|
|
|
|
* If frequency scaling from high to low, adjust frequency first.
|
|
|
|
*/
|
|
|
|
if (old_clk_rate < target_rate) {
|
|
|
|
err = regulator_set_voltage(dmcfreq->vdd_center, target_volt,
|
|
|
|
target_volt);
|
|
|
|
if (err) {
|
2018-05-09 20:57:48 +08:00
|
|
|
dev_err(dev, "Cannot set voltage %lu uV\n",
|
2016-09-05 13:06:10 +08:00
|
|
|
target_volt);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
err = clk_set_rate(dmcfreq->dmc_clk, target_rate);
|
|
|
|
if (err) {
|
2018-05-09 20:57:48 +08:00
|
|
|
dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate,
|
|
|
|
err);
|
2016-09-05 13:06:10 +08:00
|
|
|
regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt,
|
|
|
|
dmcfreq->volt);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check the dpll rate,
|
|
|
|
* There only two result we will get,
|
|
|
|
* 1. Ddr frequency scaling fail, we still get the old rate.
|
|
|
|
* 2. Ddr frequency scaling sucessful, we get the rate we set.
|
|
|
|
*/
|
|
|
|
dmcfreq->rate = clk_get_rate(dmcfreq->dmc_clk);
|
|
|
|
|
|
|
|
/* If get the incorrect rate, set voltage to old value. */
|
|
|
|
if (dmcfreq->rate != target_rate) {
|
2018-05-09 20:57:48 +08:00
|
|
|
dev_err(dev, "Got wrong frequency, Request %lu, Current %lu\n",
|
|
|
|
target_rate, dmcfreq->rate);
|
2016-09-05 13:06:10 +08:00
|
|
|
regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt,
|
|
|
|
dmcfreq->volt);
|
|
|
|
goto out;
|
|
|
|
} else if (old_clk_rate > target_rate)
|
|
|
|
err = regulator_set_voltage(dmcfreq->vdd_center, target_volt,
|
|
|
|
target_volt);
|
|
|
|
if (err)
|
2018-05-09 20:57:48 +08:00
|
|
|
dev_err(dev, "Cannot set voltage %lu uV\n", target_volt);
|
2016-09-05 13:06:10 +08:00
|
|
|
|
2016-12-05 11:23:52 +08:00
|
|
|
dmcfreq->rate = target_rate;
|
|
|
|
dmcfreq->volt = target_volt;
|
|
|
|
|
2016-09-05 13:06:10 +08:00
|
|
|
out:
|
|
|
|
mutex_unlock(&dmcfreq->lock);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rk3399_dmcfreq_get_dev_status(struct device *dev,
|
|
|
|
struct devfreq_dev_status *stat)
|
|
|
|
{
|
|
|
|
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev);
|
|
|
|
struct devfreq_event_data edata;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
ret = devfreq_event_get_event(dmcfreq->edev, &edata);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
stat->current_frequency = dmcfreq->rate;
|
|
|
|
stat->busy_time = edata.load_count;
|
|
|
|
stat->total_time = edata.total_count;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rk3399_dmcfreq_get_cur_freq(struct device *dev, unsigned long *freq)
|
|
|
|
{
|
|
|
|
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
*freq = dmcfreq->rate;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct devfreq_dev_profile rk3399_devfreq_dmc_profile = {
|
|
|
|
.polling_ms = 200,
|
|
|
|
.target = rk3399_dmcfreq_target,
|
|
|
|
.get_dev_status = rk3399_dmcfreq_get_dev_status,
|
|
|
|
.get_cur_freq = rk3399_dmcfreq_get_cur_freq,
|
|
|
|
};
|
|
|
|
|
|
|
|
static __maybe_unused int rk3399_dmcfreq_suspend(struct device *dev)
|
|
|
|
{
|
|
|
|
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev);
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
ret = devfreq_event_disable_edev(dmcfreq->edev);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "failed to disable the devfreq-event devices\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = devfreq_suspend_device(dmcfreq->devfreq);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "failed to suspend the devfreq devices\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static __maybe_unused int rk3399_dmcfreq_resume(struct device *dev)
|
|
|
|
{
|
|
|
|
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev);
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
ret = devfreq_event_enable_edev(dmcfreq->edev);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "failed to enable the devfreq-event devices\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = devfreq_resume_device(dmcfreq->devfreq);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "failed to resume the devfreq devices\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static SIMPLE_DEV_PM_OPS(rk3399_dmcfreq_pm, rk3399_dmcfreq_suspend,
|
|
|
|
rk3399_dmcfreq_resume);
|
|
|
|
|
|
|
|
static int of_get_ddr_timings(struct dram_timing *timing,
|
|
|
|
struct device_node *np)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
ret = of_property_read_u32(np, "rockchip,ddr3_speed_bin",
|
|
|
|
&timing->ddr3_speed_bin);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,pd_idle",
|
|
|
|
&timing->pd_idle);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,sr_idle",
|
|
|
|
&timing->sr_idle);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,sr_mc_gate_idle",
|
|
|
|
&timing->sr_mc_gate_idle);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,srpd_lite_idle",
|
|
|
|
&timing->srpd_lite_idle);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,standby_idle",
|
|
|
|
&timing->standby_idle);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,auto_pd_dis_freq",
|
|
|
|
&timing->auto_pd_dis_freq);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,dram_dll_dis_freq",
|
|
|
|
&timing->dram_dll_dis_freq);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_dll_dis_freq",
|
|
|
|
&timing->phy_dll_dis_freq);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,ddr3_odt_dis_freq",
|
|
|
|
&timing->ddr3_odt_dis_freq);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,ddr3_drv",
|
|
|
|
&timing->ddr3_drv);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,ddr3_odt",
|
|
|
|
&timing->ddr3_odt);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_ddr3_ca_drv",
|
|
|
|
&timing->phy_ddr3_ca_drv);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_ddr3_dq_drv",
|
|
|
|
&timing->phy_ddr3_dq_drv);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_ddr3_odt",
|
|
|
|
&timing->phy_ddr3_odt);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,lpddr3_odt_dis_freq",
|
|
|
|
&timing->lpddr3_odt_dis_freq);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,lpddr3_drv",
|
|
|
|
&timing->lpddr3_drv);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,lpddr3_odt",
|
|
|
|
&timing->lpddr3_odt);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_lpddr3_ca_drv",
|
|
|
|
&timing->phy_lpddr3_ca_drv);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_lpddr3_dq_drv",
|
|
|
|
&timing->phy_lpddr3_dq_drv);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_lpddr3_odt",
|
|
|
|
&timing->phy_lpddr3_odt);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,lpddr4_odt_dis_freq",
|
|
|
|
&timing->lpddr4_odt_dis_freq);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,lpddr4_drv",
|
|
|
|
&timing->lpddr4_drv);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,lpddr4_dq_odt",
|
|
|
|
&timing->lpddr4_dq_odt);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,lpddr4_ca_odt",
|
|
|
|
&timing->lpddr4_ca_odt);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_ca_drv",
|
|
|
|
&timing->phy_lpddr4_ca_drv);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_ck_cs_drv",
|
|
|
|
&timing->phy_lpddr4_ck_cs_drv);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_dq_drv",
|
|
|
|
&timing->phy_lpddr4_dq_drv);
|
|
|
|
ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_odt",
|
|
|
|
&timing->phy_lpddr4_odt);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rk3399_dmcfreq_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct arm_smccc_res res;
|
|
|
|
struct device *dev = &pdev->dev;
|
2019-03-22 07:14:38 +08:00
|
|
|
struct device_node *np = pdev->dev.of_node, *node;
|
2016-09-05 13:06:10 +08:00
|
|
|
struct rk3399_dmcfreq *data;
|
2018-05-09 20:57:45 +08:00
|
|
|
int ret, index, size;
|
2016-09-05 13:06:10 +08:00
|
|
|
uint32_t *timing;
|
|
|
|
struct dev_pm_opp *opp;
|
2019-03-22 07:14:38 +08:00
|
|
|
u32 ddr_type;
|
|
|
|
u32 val;
|
2016-09-05 13:06:10 +08:00
|
|
|
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct rk3399_dmcfreq), GFP_KERNEL);
|
|
|
|
if (!data)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
mutex_init(&data->lock);
|
|
|
|
|
|
|
|
data->vdd_center = devm_regulator_get(dev, "center");
|
2021-02-28 14:52:32 +08:00
|
|
|
if (IS_ERR(data->vdd_center))
|
|
|
|
return dev_err_probe(dev, PTR_ERR(data->vdd_center),
|
|
|
|
"Cannot get the regulator \"center\"\n");
|
2016-09-05 13:06:10 +08:00
|
|
|
|
|
|
|
data->dmc_clk = devm_clk_get(dev, "dmc_clk");
|
2021-02-28 14:52:32 +08:00
|
|
|
if (IS_ERR(data->dmc_clk))
|
|
|
|
return dev_err_probe(dev, PTR_ERR(data->dmc_clk),
|
|
|
|
"Cannot get the clk dmc_clk\n");
|
2016-09-05 13:06:10 +08:00
|
|
|
|
2020-09-08 18:24:47 +08:00
|
|
|
data->edev = devfreq_event_get_edev_by_phandle(dev, "devfreq-events", 0);
|
2016-09-05 13:06:10 +08:00
|
|
|
if (IS_ERR(data->edev))
|
|
|
|
return -EPROBE_DEFER;
|
|
|
|
|
|
|
|
ret = devfreq_event_enable_edev(data->edev);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "failed to enable devfreq-event devices\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get dram timing and pass it to arm trust firmware,
|
2019-05-03 02:40:13 +08:00
|
|
|
* the dram driver in arm trust firmware will get these
|
2016-09-05 13:06:10 +08:00
|
|
|
* timing and to do dram initial.
|
|
|
|
*/
|
|
|
|
if (!of_get_ddr_timings(&data->timing, np)) {
|
|
|
|
timing = &data->timing.ddr3_speed_bin;
|
|
|
|
size = sizeof(struct dram_timing) / 4;
|
|
|
|
for (index = 0; index < size; index++) {
|
|
|
|
arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, *timing++, index,
|
|
|
|
ROCKCHIP_SIP_CONFIG_DRAM_SET_PARAM,
|
|
|
|
0, 0, 0, 0, &res);
|
|
|
|
if (res.a0) {
|
|
|
|
dev_err(dev, "Failed to set dram param: %ld\n",
|
|
|
|
res.a0);
|
2019-12-23 01:41:31 +08:00
|
|
|
ret = -EINVAL;
|
|
|
|
goto err_edev;
|
2016-09-05 13:06:10 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-03-22 07:14:38 +08:00
|
|
|
node = of_parse_phandle(np, "rockchip,pmu", 0);
|
2020-06-30 18:05:46 +08:00
|
|
|
if (!node)
|
|
|
|
goto no_pmu;
|
|
|
|
|
|
|
|
data->regmap_pmu = syscon_node_to_regmap(node);
|
|
|
|
of_node_put(node);
|
|
|
|
if (IS_ERR(data->regmap_pmu)) {
|
|
|
|
ret = PTR_ERR(data->regmap_pmu);
|
|
|
|
goto err_edev;
|
2019-03-22 07:14:38 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
regmap_read(data->regmap_pmu, RK3399_PMUGRF_OS_REG2, &val);
|
|
|
|
ddr_type = (val >> RK3399_PMUGRF_DDRTYPE_SHIFT) &
|
|
|
|
RK3399_PMUGRF_DDRTYPE_MASK;
|
|
|
|
|
|
|
|
switch (ddr_type) {
|
|
|
|
case RK3399_PMUGRF_DDRTYPE_DDR3:
|
|
|
|
data->odt_dis_freq = data->timing.ddr3_odt_dis_freq;
|
|
|
|
break;
|
|
|
|
case RK3399_PMUGRF_DDRTYPE_LPDDR3:
|
|
|
|
data->odt_dis_freq = data->timing.lpddr3_odt_dis_freq;
|
|
|
|
break;
|
|
|
|
case RK3399_PMUGRF_DDRTYPE_LPDDR4:
|
|
|
|
data->odt_dis_freq = data->timing.lpddr4_odt_dis_freq;
|
|
|
|
break;
|
|
|
|
default:
|
2019-12-23 01:41:31 +08:00
|
|
|
ret = -EINVAL;
|
|
|
|
goto err_edev;
|
2021-02-02 14:55:24 +08:00
|
|
|
}
|
2019-03-22 07:14:38 +08:00
|
|
|
|
2020-06-30 18:05:46 +08:00
|
|
|
no_pmu:
|
2016-09-05 13:06:10 +08:00
|
|
|
arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, 0, 0,
|
|
|
|
ROCKCHIP_SIP_CONFIG_DRAM_INIT,
|
|
|
|
0, 0, 0, 0, &res);
|
|
|
|
|
2019-03-22 07:14:38 +08:00
|
|
|
/*
|
|
|
|
* In TF-A there is a platform SIP call to set the PD (power-down)
|
|
|
|
* timings and to enable or disable the ODT (on-die termination).
|
|
|
|
* This call needs three arguments as follows:
|
|
|
|
*
|
|
|
|
* arg0:
|
|
|
|
* bit[0-7] : sr_idle
|
|
|
|
* bit[8-15] : sr_mc_gate_idle
|
|
|
|
* bit[16-31] : standby idle
|
|
|
|
* arg1:
|
|
|
|
* bit[0-11] : pd_idle
|
|
|
|
* bit[16-27] : srpd_lite_idle
|
|
|
|
* arg2:
|
|
|
|
* bit[0] : odt enable
|
|
|
|
*/
|
|
|
|
data->odt_pd_arg0 = (data->timing.sr_idle & 0xff) |
|
|
|
|
((data->timing.sr_mc_gate_idle & 0xff) << 8) |
|
|
|
|
((data->timing.standby_idle & 0xffff) << 16);
|
|
|
|
data->odt_pd_arg1 = (data->timing.pd_idle & 0xfff) |
|
|
|
|
((data->timing.srpd_lite_idle & 0xfff) << 16);
|
|
|
|
|
2016-09-05 13:06:10 +08:00
|
|
|
/*
|
|
|
|
* We add a devfreq driver to our parent since it has a device tree node
|
|
|
|
* with operating points.
|
|
|
|
*/
|
|
|
|
if (dev_pm_opp_of_add_table(dev)) {
|
|
|
|
dev_err(dev, "Invalid operating-points in device tree.\n");
|
2019-12-23 01:41:31 +08:00
|
|
|
ret = -EINVAL;
|
|
|
|
goto err_edev;
|
2016-09-05 13:06:10 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
of_property_read_u32(np, "upthreshold",
|
|
|
|
&data->ondemand_data.upthreshold);
|
|
|
|
of_property_read_u32(np, "downdifferential",
|
|
|
|
&data->ondemand_data.downdifferential);
|
|
|
|
|
|
|
|
data->rate = clk_get_rate(data->dmc_clk);
|
|
|
|
|
|
|
|
opp = devfreq_recommended_opp(dev, &data->rate, 0);
|
PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
The opp table is not removed when the driver is unloaded neither when
there is an error within probe, so if the driver is reloaded the opp
core shows the following warning:
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
200000000, volt: 900000, enabled: 1. New: freq: 200000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
400000000, volt: 900000, enabled: 1. New: freq: 400000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
666000000, volt: 900000, enabled: 1. New: freq: 666000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
800000000, volt: 900000, enabled: 1. New: freq: 800000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
928000000, volt: 900000, enabled: 1. New: freq: 928000000,
volt: 900000, enabled: 1
This patch fixes the error path in the probe function and adds a .remove
function to properly cleanup the opp table on unloading.
Fixes: 5a893e31a636c (PM / devfreq: rockchip: add devfreq driver for rk3399 dmc)
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-06-15 23:12:17 +08:00
|
|
|
if (IS_ERR(opp)) {
|
|
|
|
ret = PTR_ERR(opp);
|
|
|
|
goto err_free_opp;
|
|
|
|
}
|
2017-01-23 12:41:47 +08:00
|
|
|
|
2016-12-05 11:23:52 +08:00
|
|
|
data->rate = dev_pm_opp_get_freq(opp);
|
|
|
|
data->volt = dev_pm_opp_get_voltage(opp);
|
2017-01-23 12:41:47 +08:00
|
|
|
dev_pm_opp_put(opp);
|
2016-09-05 13:06:10 +08:00
|
|
|
|
|
|
|
rk3399_devfreq_dmc_profile.initial_freq = data->rate;
|
|
|
|
|
2016-11-08 17:13:27 +08:00
|
|
|
data->devfreq = devm_devfreq_add_device(dev,
|
2016-09-05 13:06:10 +08:00
|
|
|
&rk3399_devfreq_dmc_profile,
|
2017-10-23 09:32:12 +08:00
|
|
|
DEVFREQ_GOV_SIMPLE_ONDEMAND,
|
2016-09-05 13:06:10 +08:00
|
|
|
&data->ondemand_data);
|
PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
The opp table is not removed when the driver is unloaded neither when
there is an error within probe, so if the driver is reloaded the opp
core shows the following warning:
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
200000000, volt: 900000, enabled: 1. New: freq: 200000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
400000000, volt: 900000, enabled: 1. New: freq: 400000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
666000000, volt: 900000, enabled: 1. New: freq: 666000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
800000000, volt: 900000, enabled: 1. New: freq: 800000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
928000000, volt: 900000, enabled: 1. New: freq: 928000000,
volt: 900000, enabled: 1
This patch fixes the error path in the probe function and adds a .remove
function to properly cleanup the opp table on unloading.
Fixes: 5a893e31a636c (PM / devfreq: rockchip: add devfreq driver for rk3399 dmc)
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-06-15 23:12:17 +08:00
|
|
|
if (IS_ERR(data->devfreq)) {
|
|
|
|
ret = PTR_ERR(data->devfreq);
|
|
|
|
goto err_free_opp;
|
|
|
|
}
|
|
|
|
|
2016-09-05 13:06:10 +08:00
|
|
|
devm_devfreq_register_opp_notifier(dev, data->devfreq);
|
|
|
|
|
|
|
|
data->dev = dev;
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
|
PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
The opp table is not removed when the driver is unloaded neither when
there is an error within probe, so if the driver is reloaded the opp
core shows the following warning:
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
200000000, volt: 900000, enabled: 1. New: freq: 200000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
400000000, volt: 900000, enabled: 1. New: freq: 400000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
666000000, volt: 900000, enabled: 1. New: freq: 666000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
800000000, volt: 900000, enabled: 1. New: freq: 800000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
928000000, volt: 900000, enabled: 1. New: freq: 928000000,
volt: 900000, enabled: 1
This patch fixes the error path in the probe function and adds a .remove
function to properly cleanup the opp table on unloading.
Fixes: 5a893e31a636c (PM / devfreq: rockchip: add devfreq driver for rk3399 dmc)
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-06-15 23:12:17 +08:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_free_opp:
|
|
|
|
dev_pm_opp_of_remove_table(&pdev->dev);
|
2019-12-23 01:41:31 +08:00
|
|
|
err_edev:
|
|
|
|
devfreq_event_disable_edev(data->edev);
|
|
|
|
|
PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
The opp table is not removed when the driver is unloaded neither when
there is an error within probe, so if the driver is reloaded the opp
core shows the following warning:
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
200000000, volt: 900000, enabled: 1. New: freq: 200000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
400000000, volt: 900000, enabled: 1. New: freq: 400000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
666000000, volt: 900000, enabled: 1. New: freq: 666000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
800000000, volt: 900000, enabled: 1. New: freq: 800000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
928000000, volt: 900000, enabled: 1. New: freq: 928000000,
volt: 900000, enabled: 1
This patch fixes the error path in the probe function and adds a .remove
function to properly cleanup the opp table on unloading.
Fixes: 5a893e31a636c (PM / devfreq: rockchip: add devfreq driver for rk3399 dmc)
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-06-15 23:12:17 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rk3399_dmcfreq_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(&pdev->dev);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Before remove the opp table we need to unregister the opp notifier.
|
|
|
|
*/
|
|
|
|
devm_devfreq_unregister_opp_notifier(dmcfreq->dev, dmcfreq->devfreq);
|
|
|
|
dev_pm_opp_of_remove_table(dmcfreq->dev);
|
|
|
|
|
2016-09-05 13:06:10 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct of_device_id rk3399dmc_devfreq_of_match[] = {
|
|
|
|
{ .compatible = "rockchip,rk3399-dmc" },
|
|
|
|
{ },
|
|
|
|
};
|
2016-10-20 05:06:24 +08:00
|
|
|
MODULE_DEVICE_TABLE(of, rk3399dmc_devfreq_of_match);
|
2016-09-05 13:06:10 +08:00
|
|
|
|
|
|
|
static struct platform_driver rk3399_dmcfreq_driver = {
|
|
|
|
.probe = rk3399_dmcfreq_probe,
|
PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
The opp table is not removed when the driver is unloaded neither when
there is an error within probe, so if the driver is reloaded the opp
core shows the following warning:
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
200000000, volt: 900000, enabled: 1. New: freq: 200000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
400000000, volt: 900000, enabled: 1. New: freq: 400000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
666000000, volt: 900000, enabled: 1. New: freq: 666000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
800000000, volt: 900000, enabled: 1. New: freq: 800000000,
volt: 900000, enabled: 1
rk3399-dmc-freq dmc: _opp_add: duplicate OPPs detected. Existing: freq:
928000000, volt: 900000, enabled: 1. New: freq: 928000000,
volt: 900000, enabled: 1
This patch fixes the error path in the probe function and adds a .remove
function to properly cleanup the opp table on unloading.
Fixes: 5a893e31a636c (PM / devfreq: rockchip: add devfreq driver for rk3399 dmc)
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-06-15 23:12:17 +08:00
|
|
|
.remove = rk3399_dmcfreq_remove,
|
2016-09-05 13:06:10 +08:00
|
|
|
.driver = {
|
|
|
|
.name = "rk3399-dmc-freq",
|
|
|
|
.pm = &rk3399_dmcfreq_pm,
|
|
|
|
.of_match_table = rk3399dmc_devfreq_of_match,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
module_platform_driver(rk3399_dmcfreq_driver);
|
|
|
|
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
MODULE_AUTHOR("Lin Huang <hl@rock-chips.com>");
|
|
|
|
MODULE_DESCRIPTION("RK3399 dmcfreq driver with devfreq framework");
|