linux/fs/f2fs/file.c

4828 lines
116 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* fs/f2fs/file.c
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*/
#include <linux/fs.h>
#include <linux/f2fs_fs.h>
#include <linux/stat.h>
#include <linux/buffer_head.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/falloc.h>
#include <linux/types.h>
#include <linux/compat.h>
#include <linux/uaccess.h>
#include <linux/mount.h>
#include <linux/pagevec.h>
#include <linux/uio.h>
#include <linux/uuid.h>
#include <linux/file.h>
#include <linux/nls.h>
#include <linux/sched/signal.h>
#include <linux/fileattr.h>
#include <linux/fadvise.h>
#include <linux/iomap.h>
#include "f2fs.h"
#include "node.h"
#include "segment.h"
#include "xattr.h"
#include "acl.h"
#include "gc.h"
#include "iostat.h"
#include <trace/events/f2fs.h>
#include <uapi/linux/f2fs.h>
static vm_fault_t f2fs_filemap_fault(struct vm_fault *vmf)
{
struct inode *inode = file_inode(vmf->vma->vm_file);
vm_fault_t ret;
ret = filemap_fault(vmf);
if (!ret)
f2fs_update_iostat(F2FS_I_SB(inode), APP_MAPPED_READ_IO,
F2FS_BLKSIZE);
trace_f2fs_filemap_fault(inode, vmf->pgoff, (unsigned long)ret);
return ret;
}
static vm_fault_t f2fs_vm_page_mkwrite(struct vm_fault *vmf)
{
struct page *page = vmf->page;
struct inode *inode = file_inode(vmf->vma->vm_file);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct dnode_of_data dn;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
bool need_alloc = true;
int err = 0;
if (unlikely(IS_IMMUTABLE(inode)))
return VM_FAULT_SIGBUS;
if (is_inode_flag_set(inode, FI_COMPRESS_RELEASED))
return VM_FAULT_SIGBUS;
if (unlikely(f2fs_cp_error(sbi))) {
err = -EIO;
goto err;
}
if (!f2fs_is_checkpoint_ready(sbi)) {
err = -ENOSPC;
goto err;
}
err = f2fs_convert_inline_inode(inode);
if (err)
goto err;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
#ifdef CONFIG_F2FS_FS_COMPRESSION
if (f2fs_compressed_file(inode)) {
int ret = f2fs_is_compressed_cluster(inode, page->index);
if (ret < 0) {
err = ret;
goto err;
} else if (ret) {
need_alloc = false;
}
}
#endif
/* should do out of any locked page */
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (need_alloc)
f2fs_balance_fs(sbi, true);
sb_start_pagefault(inode->i_sb);
f2fs_bug_on(sbi, f2fs_has_inline_data(inode));
file_update_time(vmf->vma->vm_file);
filemap_invalidate_lock_shared(inode->i_mapping);
lock_page(page);
if (unlikely(page->mapping != inode->i_mapping ||
page_offset(page) > i_size_read(inode) ||
!PageUptodate(page))) {
unlock_page(page);
err = -EFAULT;
goto out_sem;
}
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (need_alloc) {
/* block allocation */
f2fs_do_map_lock(sbi, F2FS_GET_BLOCK_PRE_AIO, true);
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
set_new_dnode(&dn, inode, NULL, NULL, 0);
err = f2fs_get_block(&dn, page->index);
f2fs_do_map_lock(sbi, F2FS_GET_BLOCK_PRE_AIO, false);
}
#ifdef CONFIG_F2FS_FS_COMPRESSION
if (!need_alloc) {
set_new_dnode(&dn, inode, NULL, NULL, 0);
err = f2fs_get_dnode_of_data(&dn, page->index, LOOKUP_NODE);
f2fs_put_dnode(&dn);
}
#endif
if (err) {
unlock_page(page);
goto out_sem;
}
f2fs_wait_on_page_writeback(page, DATA, false, true);
/* wait for GCed page writeback via META_MAPPING */
f2fs_wait_on_block_writeback(inode, dn.data_blkaddr);
/*
* check to see if the page is mapped already (no holes)
*/
if (PageMappedToDisk(page))
goto out_sem;
/* page is wholly or partially inside EOF */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
if (((loff_t)(page->index + 1) << PAGE_SHIFT) >
i_size_read(inode)) {
loff_t offset;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
offset = i_size_read(inode) & ~PAGE_MASK;
zero_user_segment(page, offset, PAGE_SIZE);
}
set_page_dirty(page);
if (!PageUptodate(page))
SetPageUptodate(page);
f2fs_update_iostat(sbi, APP_MAPPED_IO, F2FS_BLKSIZE);
f2fs_update_time(sbi, REQ_TIME);
trace_f2fs_vm_page_mkwrite(page, DATA);
out_sem:
filemap_invalidate_unlock_shared(inode->i_mapping);
sb_end_pagefault(inode->i_sb);
err:
return block_page_mkwrite_return(err);
}
static const struct vm_operations_struct f2fs_file_vm_ops = {
.fault = f2fs_filemap_fault,
.map_pages = filemap_map_pages,
.page_mkwrite = f2fs_vm_page_mkwrite,
};
static int get_parent_ino(struct inode *inode, nid_t *pino)
{
struct dentry *dentry;
/*
* Make sure to get the non-deleted alias. The alias associated with
* the open file descriptor being fsync()'ed may be deleted already.
*/
dentry = d_find_alias(inode);
if (!dentry)
return 0;
*pino = parent_ino(dentry);
dput(dentry);
return 1;
}
static inline enum cp_reason_type need_do_checkpoint(struct inode *inode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
enum cp_reason_type cp_reason = CP_NO_NEEDED;
if (!S_ISREG(inode->i_mode))
cp_reason = CP_NON_REGULAR;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
else if (f2fs_compressed_file(inode))
cp_reason = CP_COMPRESSED;
else if (inode->i_nlink != 1)
cp_reason = CP_HARDLINK;
else if (is_sbi_flag_set(sbi, SBI_NEED_CP))
cp_reason = CP_SB_NEED_CP;
else if (file_wrong_pino(inode))
cp_reason = CP_WRONG_PINO;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
else if (!f2fs_space_for_roll_forward(sbi))
cp_reason = CP_NO_SPC_ROLL;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
else if (!f2fs_is_checkpointed_node(sbi, F2FS_I(inode)->i_pino))
cp_reason = CP_NODE_NEED_CP;
else if (test_opt(sbi, FASTBOOT))
cp_reason = CP_FASTBOOT_MODE;
else if (F2FS_OPTION(sbi).active_logs == 2)
cp_reason = CP_SPEC_LOG_NUM;
else if (F2FS_OPTION(sbi).fsync_mode == FSYNC_MODE_STRICT &&
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_need_dentry_mark(sbi, inode->i_ino) &&
f2fs_exist_written_data(sbi, F2FS_I(inode)->i_pino,
TRANS_DIR_INO))
cp_reason = CP_RECOVER_DIR;
return cp_reason;
}
static bool need_inode_page_update(struct f2fs_sb_info *sbi, nid_t ino)
{
struct page *i = find_get_page(NODE_MAPPING(sbi), ino);
bool ret = false;
/* But we need to avoid that there are some inode updates */
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
if ((i && PageDirty(i)) || f2fs_need_inode_block_update(sbi, ino))
ret = true;
f2fs_put_page(i, 0);
return ret;
}
static void try_to_fix_pino(struct inode *inode)
{
struct f2fs_inode_info *fi = F2FS_I(inode);
nid_t pino;
f2fs_down_write(&fi->i_sem);
if (file_wrong_pino(inode) && inode->i_nlink == 1 &&
get_parent_ino(inode, &pino)) {
f2fs_i_pino_write(inode, pino);
file_got_pino(inode);
}
f2fs_up_write(&fi->i_sem);
}
static int f2fs_do_sync_file(struct file *file, loff_t start, loff_t end,
int datasync, bool atomic)
{
struct inode *inode = file->f_mapping->host;
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
nid_t ino = inode->i_ino;
int ret = 0;
enum cp_reason_type cp_reason = 0;
struct writeback_control wbc = {
.sync_mode = WB_SYNC_ALL,
.nr_to_write = LONG_MAX,
.for_reclaim = 0,
};
f2fs: fix to avoid broken of dnode block list f2fs recovery flow is relying on dnode block link list, it means fsynced file recovery depends on previous dnode's persistence in the list, so during fsync() we should wait on all regular inode's dnode writebacked before issuing flush. By this way, we can avoid dnode block list being broken by out-of-order IO submission due to IO scheduler or driver. Sheng Yong helps to do the test with this patch: Target:/data (f2fs, -) 64MB / 32768KB / 4KB / 8 1 / PERSIST / Index Base: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08 2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7 3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48 Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333 After: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 798.81 202.5 41143 40613.87 602.71 838.08 913.83 2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27 3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91 Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333 Patched/Original: 0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189 It looks like atomic write will suffer performance regression. I suspect that the criminal is that we forcing to wait all dnode being in storage cache before we issue PREFLUSH+FUA. BTW, will commit ("f2fs: don't need to wait for node writes for atomic write") cause the problem: we will lose data of last transaction after SPO, even if atomic write return no error: - atomic_open(); - write() P1, P2, P3; - atomic_commit(); - writeback data: P1, P2, P3; - writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing last transaction. - preflush + fua; - power-cut If we don't wait dnode writeback for atomic_write: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85 2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77 3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92 Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18 Patched/Original: 0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294 SQLite's performance recovers. Jaegeuk: "Practically, I don't see db corruption becase of this. We can excuse to lose the last transaction." Finally, we decide to keep original implementation of atomic write interface sematics that we don't wait all dnode writeback before preflush+fua submission. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 23:03:19 +08:00
unsigned int seq_id = 0;
if (unlikely(f2fs_readonly(inode->i_sb)))
return 0;
trace_f2fs_sync_file_enter(inode);
if (S_ISDIR(inode->i_mode))
goto go_write;
/* if fdatasync is triggered, let's do in-place-update */
if (datasync || get_dirty_pages(inode) <= SM_I(sbi)->min_fsync_blocks)
set_inode_flag(inode, FI_NEED_IPU);
ret = file_write_and_wait_range(file, start, end);
clear_inode_flag(inode, FI_NEED_IPU);
if (ret || is_sbi_flag_set(sbi, SBI_CP_DISABLED)) {
trace_f2fs_sync_file_exit(inode, cp_reason, datasync, ret);
return ret;
}
/* if the inode is dirty, let's recover all the time */
if (!f2fs_skip_inode_update(inode, datasync)) {
f2fs_write_inode(inode, NULL);
goto go_write;
}
/*
* if there is no written data, don't waste time to write recovery info.
*/
if (!is_inode_flag_set(inode, FI_APPEND_WRITE) &&
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
!f2fs_exist_written_data(sbi, ino, APPEND_INO)) {
/* it may call write_inode just prior to fsync */
if (need_inode_page_update(sbi, ino))
goto go_write;
if (is_inode_flag_set(inode, FI_UPDATE_WRITE) ||
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_exist_written_data(sbi, ino, UPDATE_INO))
goto flush_out;
goto out;
} else {
/*
* for OPU case, during fsync(), node can be persisted before
* data when lower device doesn't support write barrier, result
* in data corruption after SPO.
* So for strict fsync mode, force to use atomic write sematics
* to keep write order in between data/node and last node to
* avoid potential data corruption.
*/
if (F2FS_OPTION(sbi).fsync_mode ==
FSYNC_MODE_STRICT && !atomic)
atomic = true;
}
go_write:
/*
* Both of fdatasync() and fsync() are able to be recovered from
* sudden-power-off.
*/
f2fs_down_read(&F2FS_I(inode)->i_sem);
cp_reason = need_do_checkpoint(inode);
f2fs_up_read(&F2FS_I(inode)->i_sem);
if (cp_reason) {
/* all the dirty node pages should be flushed for POR */
ret = f2fs_sync_fs(inode->i_sb, 1);
/*
* We've secured consistency through sync_fs. Following pino
* will be used only for fsynced inodes after checkpoint.
*/
try_to_fix_pino(inode);
clear_inode_flag(inode, FI_APPEND_WRITE);
clear_inode_flag(inode, FI_UPDATE_WRITE);
goto out;
}
f2fs: fix conditions to remain recovery information in f2fs_sync_file This patch revisited whole the recovery information during the f2fs_sync_file. In this patch, there are three information to make a decision. a) IS_CHECKPOINTED, /* is it checkpointed before? */ b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */ c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */ And, the scenarios for our rule are based on: [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) 2. inode(x) | CP | inode(F) | dnode(F) 3. inode(x) | CP | dnode(F) | inode(x) | inode(F) 4. inode(x) | CP | dnode(F) | inode(F) 5. CP | inode(x) | dnode(F) | inode(DF) 6. CP | inode(DF) | dnode(F) 7. CP | dnode(F) | inode(DF) 8. CP | dnode(F) | inode(x) | inode(DF) For example, #3, the three conditions should be changed as follows. inode(x) | CP | dnode(F) | inode(x) | inode(F) a) x o o o o b) x x x x o c) x o o x o If f2fs_sync_file stops ------^, it should write inode(F) --------------^ So, the need_inode_block_update should return true, since c) get_nat_flag(e, HAS_LAST_FSYNC), is false. For example, #8, CP | alloc | dnode(F) | inode(x) | inode(DF) a) o x x x x b) x x x o c) o o x o If f2fs_sync_file stops -------^, it should write inode(DF) --------------^ Note that, the roll-forward policy should follow this rule, which means, if there are any missing blocks, we doesn't need to recover that inode. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 05:50:48 +08:00
sync_nodes:
atomic_inc(&sbi->wb_sync_req[NODE]);
f2fs: fix to avoid broken of dnode block list f2fs recovery flow is relying on dnode block link list, it means fsynced file recovery depends on previous dnode's persistence in the list, so during fsync() we should wait on all regular inode's dnode writebacked before issuing flush. By this way, we can avoid dnode block list being broken by out-of-order IO submission due to IO scheduler or driver. Sheng Yong helps to do the test with this patch: Target:/data (f2fs, -) 64MB / 32768KB / 4KB / 8 1 / PERSIST / Index Base: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08 2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7 3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48 Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333 After: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 798.81 202.5 41143 40613.87 602.71 838.08 913.83 2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27 3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91 Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333 Patched/Original: 0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189 It looks like atomic write will suffer performance regression. I suspect that the criminal is that we forcing to wait all dnode being in storage cache before we issue PREFLUSH+FUA. BTW, will commit ("f2fs: don't need to wait for node writes for atomic write") cause the problem: we will lose data of last transaction after SPO, even if atomic write return no error: - atomic_open(); - write() P1, P2, P3; - atomic_commit(); - writeback data: P1, P2, P3; - writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing last transaction. - preflush + fua; - power-cut If we don't wait dnode writeback for atomic_write: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85 2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77 3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92 Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18 Patched/Original: 0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294 SQLite's performance recovers. Jaegeuk: "Practically, I don't see db corruption becase of this. We can excuse to lose the last transaction." Finally, we decide to keep original implementation of atomic write interface sematics that we don't wait all dnode writeback before preflush+fua submission. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 23:03:19 +08:00
ret = f2fs_fsync_node_pages(sbi, inode, &wbc, atomic, &seq_id);
atomic_dec(&sbi->wb_sync_req[NODE]);
if (ret)
goto out;
/* if cp_error was enabled, we should avoid infinite loop */
if (unlikely(f2fs_cp_error(sbi))) {
ret = -EIO;
goto out;
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
if (f2fs_need_inode_block_update(sbi, ino)) {
f2fs_mark_inode_dirty_sync(inode, true);
f2fs_write_inode(inode, NULL);
goto sync_nodes;
}
/*
* If it's atomic_write, it's just fine to keep write ordering. So
* here we don't need to wait for node write completion, since we use
* node chain which serializes node blocks. If one of node writes are
* reordered, we can see simply broken chain, resulting in stopping
* roll-forward recovery. It means we'll recover all or none node blocks
* given fsync mark.
*/
if (!atomic) {
f2fs: fix to avoid broken of dnode block list f2fs recovery flow is relying on dnode block link list, it means fsynced file recovery depends on previous dnode's persistence in the list, so during fsync() we should wait on all regular inode's dnode writebacked before issuing flush. By this way, we can avoid dnode block list being broken by out-of-order IO submission due to IO scheduler or driver. Sheng Yong helps to do the test with this patch: Target:/data (f2fs, -) 64MB / 32768KB / 4KB / 8 1 / PERSIST / Index Base: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08 2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7 3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48 Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333 After: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 798.81 202.5 41143 40613.87 602.71 838.08 913.83 2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27 3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91 Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333 Patched/Original: 0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189 It looks like atomic write will suffer performance regression. I suspect that the criminal is that we forcing to wait all dnode being in storage cache before we issue PREFLUSH+FUA. BTW, will commit ("f2fs: don't need to wait for node writes for atomic write") cause the problem: we will lose data of last transaction after SPO, even if atomic write return no error: - atomic_open(); - write() P1, P2, P3; - atomic_commit(); - writeback data: P1, P2, P3; - writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing last transaction. - preflush + fua; - power-cut If we don't wait dnode writeback for atomic_write: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85 2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77 3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92 Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18 Patched/Original: 0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294 SQLite's performance recovers. Jaegeuk: "Practically, I don't see db corruption becase of this. We can excuse to lose the last transaction." Finally, we decide to keep original implementation of atomic write interface sematics that we don't wait all dnode writeback before preflush+fua submission. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 23:03:19 +08:00
ret = f2fs_wait_on_node_pages_writeback(sbi, seq_id);
if (ret)
goto out;
}
/* once recovery info is written, don't need to tack this */
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_remove_ino_entry(sbi, ino, APPEND_INO);
clear_inode_flag(inode, FI_APPEND_WRITE);
flush_out:
if (!atomic && F2FS_OPTION(sbi).fsync_mode != FSYNC_MODE_NOBARRIER)
ret = f2fs_issue_flush(sbi, inode->i_ino);
if (!ret) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_remove_ino_entry(sbi, ino, UPDATE_INO);
clear_inode_flag(inode, FI_UPDATE_WRITE);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_remove_ino_entry(sbi, ino, FLUSH_INO);
}
f2fs_update_time(sbi, REQ_TIME);
out:
trace_f2fs_sync_file_exit(inode, cp_reason, datasync, ret);
return ret;
}
int f2fs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
{
if (unlikely(f2fs_cp_error(F2FS_I_SB(file_inode(file)))))
return -EIO;
return f2fs_do_sync_file(file, start, end, datasync, false);
}
static bool __found_offset(struct address_space *mapping, block_t blkaddr,
pgoff_t index, int whence)
{
switch (whence) {
case SEEK_DATA:
if (__is_valid_data_blkaddr(blkaddr))
return true;
if (blkaddr == NEW_ADDR &&
xa_get_mark(&mapping->i_pages, index, PAGECACHE_TAG_DIRTY))
return true;
break;
case SEEK_HOLE:
if (blkaddr == NULL_ADDR)
return true;
break;
}
return false;
}
static loff_t f2fs_seek_block(struct file *file, loff_t offset, int whence)
{
struct inode *inode = file->f_mapping->host;
loff_t maxbytes = inode->i_sb->s_maxbytes;
struct dnode_of_data dn;
pgoff_t pgofs, end_offset;
loff_t data_ofs = offset;
loff_t isize;
int err = 0;
inode_lock(inode);
isize = i_size_read(inode);
if (offset >= isize)
goto fail;
/* handle inline data case */
if (f2fs_has_inline_data(inode)) {
if (whence == SEEK_HOLE) {
data_ofs = isize;
goto found;
} else if (whence == SEEK_DATA) {
data_ofs = offset;
goto found;
}
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pgofs = (pgoff_t)(offset >> PAGE_SHIFT);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
for (; data_ofs < isize; data_ofs = (loff_t)pgofs << PAGE_SHIFT) {
set_new_dnode(&dn, inode, NULL, NULL, 0);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
err = f2fs_get_dnode_of_data(&dn, pgofs, LOOKUP_NODE);
if (err && err != -ENOENT) {
goto fail;
} else if (err == -ENOENT) {
/* direct node does not exists */
if (whence == SEEK_DATA) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
pgofs = f2fs_get_next_page_offset(&dn, pgofs);
continue;
} else {
goto found;
}
}
end_offset = ADDRS_PER_PAGE(dn.node_page, inode);
/* find data/hole in dnode block */
for (; dn.ofs_in_node < end_offset;
dn.ofs_in_node++, pgofs++,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
data_ofs = (loff_t)pgofs << PAGE_SHIFT) {
block_t blkaddr;
blkaddr = f2fs_data_blkaddr(&dn);
f2fs: fix to do sanity check with block address in main area This patch add to do sanity check with below field: - cp_pack_total_block_count - blkaddr of data/node - extent info - Overview BUG() in verify_block_addr() when writing to a corrupted f2fs image - Reproduce (4.18 upstream kernel) - POC (poc.c) static void activity(char *mpoint) { char *foo_bar_baz; int err; static int buf[8192]; memset(buf, 0, sizeof(buf)); err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint); int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777); if (fd >= 0) { write(fd, (char *)buf, sizeof(buf)); fdatasync(fd); close(fd); } } int main(int argc, char *argv[]) { activity(argv[1]); return 0; } - Kernel message [ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3 [ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240 [ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4 [ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240 [ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d [ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202 [ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113 [ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540 [ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8 [ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540 [ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450 [ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.729171] Call Trace: [ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00 [ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0 [ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280 [ 699.729269] ? __radix_tree_replace+0xa3/0x120 [ 699.729276] __write_data_page+0x5c7/0xe30 [ 699.729291] ? kasan_check_read+0x11/0x20 [ 699.729310] ? page_mapped+0x8a/0x110 [ 699.729321] ? page_mkclean+0xe9/0x160 [ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00 [ 699.729331] ? invalid_page_referenced_vma+0x130/0x130 [ 699.729345] ? clear_page_dirty_for_io+0x332/0x450 [ 699.729351] f2fs_write_cache_pages+0x4ca/0x860 [ 699.729358] ? __write_data_page+0xe30/0xe30 [ 699.729374] ? percpu_counter_add_batch+0x22/0xa0 [ 699.729380] ? kasan_check_write+0x14/0x20 [ 699.729391] ? _raw_spin_lock+0x17/0x40 [ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30 [ 699.729413] ? iov_iter_advance+0x113/0x640 [ 699.729418] ? f2fs_write_end+0x133/0x2e0 [ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640 [ 699.729428] f2fs_write_data_pages+0x329/0x520 [ 699.729433] ? generic_perform_write+0x250/0x320 [ 699.729438] ? f2fs_write_cache_pages+0x860/0x860 [ 699.729454] ? current_time+0x110/0x110 [ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370 [ 699.729464] do_writepages+0x37/0xb0 [ 699.729468] ? f2fs_write_cache_pages+0x860/0x860 [ 699.729472] ? do_writepages+0x37/0xb0 [ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0 [ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0 [ 699.729496] ? __vfs_write+0x2b2/0x410 [ 699.729501] file_write_and_wait_range+0x66/0xb0 [ 699.729506] f2fs_do_sync_file+0x1f9/0xd90 [ 699.729511] ? truncate_partial_data_page+0x290/0x290 [ 699.729521] ? __sb_end_write+0x30/0x50 [ 699.729526] ? vfs_write+0x20f/0x260 [ 699.729530] f2fs_sync_file+0x9a/0xb0 [ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.729548] vfs_fsync_range+0x68/0x100 [ 699.729554] ? __fget_light+0xc9/0xe0 [ 699.729558] do_fsync+0x3d/0x70 [ 699.729562] __x64_sys_fdatasync+0x24/0x30 [ 699.729585] do_syscall_64+0x78/0x170 [ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 699.729613] RIP: 0033:0x7f9bf930d800 [ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24 [ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 699.729782] ------------[ cut here ]------------ [ 699.729785] kernel BUG at fs/f2fs/segment.h:654! [ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI [ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4 [ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730 [ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0 [ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283 [ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef [ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c [ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55 [ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940 [ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001 [ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.752874] Call Trace: [ 699.753386] ? f2fs_inplace_write_data+0x93/0x240 [ 699.754341] f2fs_inplace_write_data+0xd2/0x240 [ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00 [ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0 [ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280 [ 699.758209] ? __radix_tree_replace+0xa3/0x120 [ 699.759164] __write_data_page+0x5c7/0xe30 [ 699.760002] ? kasan_check_read+0x11/0x20 [ 699.760823] ? page_mapped+0x8a/0x110 [ 699.761573] ? page_mkclean+0xe9/0x160 [ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00 [ 699.763332] ? invalid_page_referenced_vma+0x130/0x130 [ 699.764374] ? clear_page_dirty_for_io+0x332/0x450 [ 699.765347] f2fs_write_cache_pages+0x4ca/0x860 [ 699.766276] ? __write_data_page+0xe30/0xe30 [ 699.767161] ? percpu_counter_add_batch+0x22/0xa0 [ 699.768112] ? kasan_check_write+0x14/0x20 [ 699.768951] ? _raw_spin_lock+0x17/0x40 [ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30 [ 699.770885] ? iov_iter_advance+0x113/0x640 [ 699.771743] ? f2fs_write_end+0x133/0x2e0 [ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640 [ 699.773680] f2fs_write_data_pages+0x329/0x520 [ 699.774603] ? generic_perform_write+0x250/0x320 [ 699.775544] ? f2fs_write_cache_pages+0x860/0x860 [ 699.776510] ? current_time+0x110/0x110 [ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370 [ 699.778279] do_writepages+0x37/0xb0 [ 699.779026] ? f2fs_write_cache_pages+0x860/0x860 [ 699.779978] ? do_writepages+0x37/0xb0 [ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0 [ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0 [ 699.782820] ? __vfs_write+0x2b2/0x410 [ 699.783597] file_write_and_wait_range+0x66/0xb0 [ 699.784540] f2fs_do_sync_file+0x1f9/0xd90 [ 699.785381] ? truncate_partial_data_page+0x290/0x290 [ 699.786415] ? __sb_end_write+0x30/0x50 [ 699.787204] ? vfs_write+0x20f/0x260 [ 699.787941] f2fs_sync_file+0x9a/0xb0 [ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.789572] vfs_fsync_range+0x68/0x100 [ 699.790360] ? __fget_light+0xc9/0xe0 [ 699.791128] do_fsync+0x3d/0x70 [ 699.791779] __x64_sys_fdatasync+0x24/0x30 [ 699.792614] do_syscall_64+0x78/0x170 [ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 699.794406] RIP: 0033:0x7f9bf930d800 [ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24 [ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]--- [ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730 [ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0 [ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283 [ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef [ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c [ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55 [ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940 [ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001 [ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.835556] ================================================================== [ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0 [ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309 [ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4 [ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.843475] Call Trace: [ 699.843982] dump_stack+0x7b/0xb5 [ 699.844661] print_address_description+0x70/0x290 [ 699.845607] kasan_report+0x291/0x390 [ 699.846351] ? update_stack_state+0x38c/0x3e0 [ 699.853831] __asan_load8+0x54/0x90 [ 699.854569] update_stack_state+0x38c/0x3e0 [ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20 [ 699.856601] ? __save_stack_trace+0x5e/0x100 [ 699.857476] unwind_next_frame.part.5+0x18e/0x490 [ 699.858448] ? unwind_dump+0x290/0x290 [ 699.859217] ? clear_page_dirty_for_io+0x332/0x450 [ 699.860185] __unwind_start+0x106/0x190 [ 699.860974] __save_stack_trace+0x5e/0x100 [ 699.861808] ? __save_stack_trace+0x5e/0x100 [ 699.862691] ? unlink_anon_vmas+0xba/0x2c0 [ 699.863525] save_stack_trace+0x1f/0x30 [ 699.864312] save_stack+0x46/0xd0 [ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420 [ 699.865990] ? flush_tlb_mm_range+0x15e/0x220 [ 699.866889] ? kasan_check_write+0x14/0x20 [ 699.867724] ? __dec_node_state+0x92/0xb0 [ 699.868543] ? lock_page_memcg+0x85/0xf0 [ 699.869350] ? unlock_page_memcg+0x16/0x80 [ 699.870185] ? page_remove_rmap+0x198/0x520 [ 699.871048] ? mark_page_accessed+0x133/0x200 [ 699.871930] ? _cond_resched+0x1a/0x50 [ 699.872700] ? unmap_page_range+0xcd4/0xe50 [ 699.873551] ? rb_next+0x58/0x80 [ 699.874217] ? rb_next+0x58/0x80 [ 699.874895] __kasan_slab_free+0x13c/0x1a0 [ 699.875734] ? unlink_anon_vmas+0xba/0x2c0 [ 699.876563] kasan_slab_free+0xe/0x10 [ 699.877315] kmem_cache_free+0x89/0x1e0 [ 699.878095] unlink_anon_vmas+0xba/0x2c0 [ 699.878913] free_pgtables+0x101/0x1b0 [ 699.879677] exit_mmap+0x146/0x2a0 [ 699.880378] ? __ia32_sys_munmap+0x50/0x50 [ 699.881214] ? kasan_check_read+0x11/0x20 [ 699.882052] ? mm_update_next_owner+0x322/0x380 [ 699.882985] mmput+0x8b/0x1d0 [ 699.883602] do_exit+0x43a/0x1390 [ 699.884288] ? mm_update_next_owner+0x380/0x380 [ 699.885212] ? f2fs_sync_file+0x9a/0xb0 [ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.886877] ? vfs_fsync_range+0x68/0x100 [ 699.887694] ? __fget_light+0xc9/0xe0 [ 699.888442] ? do_fsync+0x3d/0x70 [ 699.889118] ? __x64_sys_fdatasync+0x24/0x30 [ 699.889996] rewind_stack_do_exit+0x17/0x20 [ 699.890860] RIP: 0033:0x7f9bf930d800 [ 699.891585] Code: Bad RIP value. [ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.901241] The buggy address belongs to the page: [ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 699.903811] flags: 0x2ffff0000000000() [ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000 [ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000 [ 699.907673] page dumped because: kasan: bad access detected [ 699.909108] Memory state around the buggy address: [ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00 [ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2 [ 699.914392] ^ [ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00 [ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00 [ 699.918634] ================================================================== - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644 Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
if (__is_valid_data_blkaddr(blkaddr) &&
!f2fs_is_valid_blkaddr(F2FS_I_SB(inode),
f2fs: introduce DATA_GENERIC_ENHANCE Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check whether @blkaddr locates in main area or not. That check is weak, since the block address in range of main area can point to the address which is not valid in segment info table, and we can not detect such condition, we may suffer worse corruption as system continues running. So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check which trigger SIT bitmap check rather than only range check. This patch did below changes as wel: - set SBI_NEED_FSCK in f2fs_is_valid_blkaddr(). - get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid. - introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check. - spread blkaddr check in: * f2fs_get_node_info() * __read_out_blkaddrs() * f2fs_submit_page_read() * ra_data_block() * do_recover_data() This patch can fix bug reported from bugzilla below: https://bugzilla.kernel.org/show_bug.cgi?id=203215 https://bugzilla.kernel.org/show_bug.cgi?id=203223 https://bugzilla.kernel.org/show_bug.cgi?id=203231 https://bugzilla.kernel.org/show_bug.cgi?id=203235 https://bugzilla.kernel.org/show_bug.cgi?id=203241 = Update by Jaegeuk Kim = DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths. But, xfstest/generic/446 compalins some generated kernel messages saying invalid bitmap was detected when reading a block. The reaons is, when we get the block addresses from extent_cache, there is no lock to synchronize it from truncating the blocks in parallel. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
blkaddr, DATA_GENERIC_ENHANCE)) {
f2fs: fix to do sanity check with block address in main area This patch add to do sanity check with below field: - cp_pack_total_block_count - blkaddr of data/node - extent info - Overview BUG() in verify_block_addr() when writing to a corrupted f2fs image - Reproduce (4.18 upstream kernel) - POC (poc.c) static void activity(char *mpoint) { char *foo_bar_baz; int err; static int buf[8192]; memset(buf, 0, sizeof(buf)); err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint); int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777); if (fd >= 0) { write(fd, (char *)buf, sizeof(buf)); fdatasync(fd); close(fd); } } int main(int argc, char *argv[]) { activity(argv[1]); return 0; } - Kernel message [ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3 [ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240 [ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4 [ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240 [ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d [ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202 [ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113 [ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540 [ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8 [ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540 [ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450 [ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.729171] Call Trace: [ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00 [ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0 [ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280 [ 699.729269] ? __radix_tree_replace+0xa3/0x120 [ 699.729276] __write_data_page+0x5c7/0xe30 [ 699.729291] ? kasan_check_read+0x11/0x20 [ 699.729310] ? page_mapped+0x8a/0x110 [ 699.729321] ? page_mkclean+0xe9/0x160 [ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00 [ 699.729331] ? invalid_page_referenced_vma+0x130/0x130 [ 699.729345] ? clear_page_dirty_for_io+0x332/0x450 [ 699.729351] f2fs_write_cache_pages+0x4ca/0x860 [ 699.729358] ? __write_data_page+0xe30/0xe30 [ 699.729374] ? percpu_counter_add_batch+0x22/0xa0 [ 699.729380] ? kasan_check_write+0x14/0x20 [ 699.729391] ? _raw_spin_lock+0x17/0x40 [ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30 [ 699.729413] ? iov_iter_advance+0x113/0x640 [ 699.729418] ? f2fs_write_end+0x133/0x2e0 [ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640 [ 699.729428] f2fs_write_data_pages+0x329/0x520 [ 699.729433] ? generic_perform_write+0x250/0x320 [ 699.729438] ? f2fs_write_cache_pages+0x860/0x860 [ 699.729454] ? current_time+0x110/0x110 [ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370 [ 699.729464] do_writepages+0x37/0xb0 [ 699.729468] ? f2fs_write_cache_pages+0x860/0x860 [ 699.729472] ? do_writepages+0x37/0xb0 [ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0 [ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0 [ 699.729496] ? __vfs_write+0x2b2/0x410 [ 699.729501] file_write_and_wait_range+0x66/0xb0 [ 699.729506] f2fs_do_sync_file+0x1f9/0xd90 [ 699.729511] ? truncate_partial_data_page+0x290/0x290 [ 699.729521] ? __sb_end_write+0x30/0x50 [ 699.729526] ? vfs_write+0x20f/0x260 [ 699.729530] f2fs_sync_file+0x9a/0xb0 [ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.729548] vfs_fsync_range+0x68/0x100 [ 699.729554] ? __fget_light+0xc9/0xe0 [ 699.729558] do_fsync+0x3d/0x70 [ 699.729562] __x64_sys_fdatasync+0x24/0x30 [ 699.729585] do_syscall_64+0x78/0x170 [ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 699.729613] RIP: 0033:0x7f9bf930d800 [ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24 [ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 699.729782] ------------[ cut here ]------------ [ 699.729785] kernel BUG at fs/f2fs/segment.h:654! [ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI [ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4 [ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730 [ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0 [ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283 [ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef [ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c [ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55 [ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940 [ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001 [ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.752874] Call Trace: [ 699.753386] ? f2fs_inplace_write_data+0x93/0x240 [ 699.754341] f2fs_inplace_write_data+0xd2/0x240 [ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00 [ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0 [ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280 [ 699.758209] ? __radix_tree_replace+0xa3/0x120 [ 699.759164] __write_data_page+0x5c7/0xe30 [ 699.760002] ? kasan_check_read+0x11/0x20 [ 699.760823] ? page_mapped+0x8a/0x110 [ 699.761573] ? page_mkclean+0xe9/0x160 [ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00 [ 699.763332] ? invalid_page_referenced_vma+0x130/0x130 [ 699.764374] ? clear_page_dirty_for_io+0x332/0x450 [ 699.765347] f2fs_write_cache_pages+0x4ca/0x860 [ 699.766276] ? __write_data_page+0xe30/0xe30 [ 699.767161] ? percpu_counter_add_batch+0x22/0xa0 [ 699.768112] ? kasan_check_write+0x14/0x20 [ 699.768951] ? _raw_spin_lock+0x17/0x40 [ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30 [ 699.770885] ? iov_iter_advance+0x113/0x640 [ 699.771743] ? f2fs_write_end+0x133/0x2e0 [ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640 [ 699.773680] f2fs_write_data_pages+0x329/0x520 [ 699.774603] ? generic_perform_write+0x250/0x320 [ 699.775544] ? f2fs_write_cache_pages+0x860/0x860 [ 699.776510] ? current_time+0x110/0x110 [ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370 [ 699.778279] do_writepages+0x37/0xb0 [ 699.779026] ? f2fs_write_cache_pages+0x860/0x860 [ 699.779978] ? do_writepages+0x37/0xb0 [ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0 [ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0 [ 699.782820] ? __vfs_write+0x2b2/0x410 [ 699.783597] file_write_and_wait_range+0x66/0xb0 [ 699.784540] f2fs_do_sync_file+0x1f9/0xd90 [ 699.785381] ? truncate_partial_data_page+0x290/0x290 [ 699.786415] ? __sb_end_write+0x30/0x50 [ 699.787204] ? vfs_write+0x20f/0x260 [ 699.787941] f2fs_sync_file+0x9a/0xb0 [ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.789572] vfs_fsync_range+0x68/0x100 [ 699.790360] ? __fget_light+0xc9/0xe0 [ 699.791128] do_fsync+0x3d/0x70 [ 699.791779] __x64_sys_fdatasync+0x24/0x30 [ 699.792614] do_syscall_64+0x78/0x170 [ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 699.794406] RIP: 0033:0x7f9bf930d800 [ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24 [ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]--- [ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730 [ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0 [ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283 [ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef [ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c [ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55 [ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940 [ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001 [ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.835556] ================================================================== [ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0 [ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309 [ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4 [ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.843475] Call Trace: [ 699.843982] dump_stack+0x7b/0xb5 [ 699.844661] print_address_description+0x70/0x290 [ 699.845607] kasan_report+0x291/0x390 [ 699.846351] ? update_stack_state+0x38c/0x3e0 [ 699.853831] __asan_load8+0x54/0x90 [ 699.854569] update_stack_state+0x38c/0x3e0 [ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20 [ 699.856601] ? __save_stack_trace+0x5e/0x100 [ 699.857476] unwind_next_frame.part.5+0x18e/0x490 [ 699.858448] ? unwind_dump+0x290/0x290 [ 699.859217] ? clear_page_dirty_for_io+0x332/0x450 [ 699.860185] __unwind_start+0x106/0x190 [ 699.860974] __save_stack_trace+0x5e/0x100 [ 699.861808] ? __save_stack_trace+0x5e/0x100 [ 699.862691] ? unlink_anon_vmas+0xba/0x2c0 [ 699.863525] save_stack_trace+0x1f/0x30 [ 699.864312] save_stack+0x46/0xd0 [ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420 [ 699.865990] ? flush_tlb_mm_range+0x15e/0x220 [ 699.866889] ? kasan_check_write+0x14/0x20 [ 699.867724] ? __dec_node_state+0x92/0xb0 [ 699.868543] ? lock_page_memcg+0x85/0xf0 [ 699.869350] ? unlock_page_memcg+0x16/0x80 [ 699.870185] ? page_remove_rmap+0x198/0x520 [ 699.871048] ? mark_page_accessed+0x133/0x200 [ 699.871930] ? _cond_resched+0x1a/0x50 [ 699.872700] ? unmap_page_range+0xcd4/0xe50 [ 699.873551] ? rb_next+0x58/0x80 [ 699.874217] ? rb_next+0x58/0x80 [ 699.874895] __kasan_slab_free+0x13c/0x1a0 [ 699.875734] ? unlink_anon_vmas+0xba/0x2c0 [ 699.876563] kasan_slab_free+0xe/0x10 [ 699.877315] kmem_cache_free+0x89/0x1e0 [ 699.878095] unlink_anon_vmas+0xba/0x2c0 [ 699.878913] free_pgtables+0x101/0x1b0 [ 699.879677] exit_mmap+0x146/0x2a0 [ 699.880378] ? __ia32_sys_munmap+0x50/0x50 [ 699.881214] ? kasan_check_read+0x11/0x20 [ 699.882052] ? mm_update_next_owner+0x322/0x380 [ 699.882985] mmput+0x8b/0x1d0 [ 699.883602] do_exit+0x43a/0x1390 [ 699.884288] ? mm_update_next_owner+0x380/0x380 [ 699.885212] ? f2fs_sync_file+0x9a/0xb0 [ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.886877] ? vfs_fsync_range+0x68/0x100 [ 699.887694] ? __fget_light+0xc9/0xe0 [ 699.888442] ? do_fsync+0x3d/0x70 [ 699.889118] ? __x64_sys_fdatasync+0x24/0x30 [ 699.889996] rewind_stack_do_exit+0x17/0x20 [ 699.890860] RIP: 0033:0x7f9bf930d800 [ 699.891585] Code: Bad RIP value. [ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.901241] The buggy address belongs to the page: [ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 699.903811] flags: 0x2ffff0000000000() [ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000 [ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000 [ 699.907673] page dumped because: kasan: bad access detected [ 699.909108] Memory state around the buggy address: [ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00 [ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2 [ 699.914392] ^ [ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00 [ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00 [ 699.918634] ================================================================== - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644 Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
f2fs_put_dnode(&dn);
goto fail;
}
if (__found_offset(file->f_mapping, blkaddr,
pgofs, whence)) {
f2fs_put_dnode(&dn);
goto found;
}
}
f2fs_put_dnode(&dn);
}
if (whence == SEEK_DATA)
goto fail;
found:
if (whence == SEEK_HOLE && data_ofs > isize)
data_ofs = isize;
inode_unlock(inode);
return vfs_setpos(file, data_ofs, maxbytes);
fail:
inode_unlock(inode);
return -ENXIO;
}
static loff_t f2fs_llseek(struct file *file, loff_t offset, int whence)
{
struct inode *inode = file->f_mapping->host;
loff_t maxbytes = inode->i_sb->s_maxbytes;
if (f2fs_compressed_file(inode))
maxbytes = max_file_blocks(inode) << F2FS_BLKSIZE_BITS;
switch (whence) {
case SEEK_SET:
case SEEK_CUR:
case SEEK_END:
return generic_file_llseek_size(file, offset, whence,
maxbytes, i_size_read(inode));
case SEEK_DATA:
case SEEK_HOLE:
if (offset < 0)
return -ENXIO;
return f2fs_seek_block(file, offset, whence);
}
return -EINVAL;
}
static int f2fs_file_mmap(struct file *file, struct vm_area_struct *vma)
{
struct inode *inode = file_inode(file);
if (unlikely(f2fs_cp_error(F2FS_I_SB(inode))))
return -EIO;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (!f2fs_is_compress_backend_ready(inode))
return -EOPNOTSUPP;
file_accessed(file);
vma->vm_ops = &f2fs_file_vm_ops;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
set_inode_flag(inode, FI_MMAP_FILE);
return 0;
}
static int f2fs_file_open(struct inode *inode, struct file *filp)
{
int err = fscrypt_file_open(inode, filp);
f2fs: add fs-verity support Add fs-verity support to f2fs. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. The f2fs support for fs-verity consists of: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->readpages() to verify data as it's read from verity files and to support reading verity metadata pages. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). Like ext4, f2fs stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by f2fs with only some relatively small changes to f2fs. Extended attributes cannot be used because (a) f2fs limits the total size of an inode's xattr entries to 4096 bytes, which wouldn't be enough for even a single Merkle tree block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity metadata *must* be encrypted when the file is because it contains hashes of the plaintext data. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (err)
return err;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (!f2fs_is_compress_backend_ready(inode))
return -EOPNOTSUPP;
f2fs: add fs-verity support Add fs-verity support to f2fs. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. The f2fs support for fs-verity consists of: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->readpages() to verify data as it's read from verity files and to support reading verity metadata pages. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). Like ext4, f2fs stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by f2fs with only some relatively small changes to f2fs. Extended attributes cannot be used because (a) f2fs limits the total size of an inode's xattr entries to 4096 bytes, which wouldn't be enough for even a single Merkle tree block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity metadata *must* be encrypted when the file is because it contains hashes of the plaintext data. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
err = fsverity_file_open(inode, filp);
if (err)
return err;
filp->f_mode |= FMODE_NOWAIT;
return dquot_file_open(inode, filp);
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
void f2fs_truncate_data_blocks_range(struct dnode_of_data *dn, int count)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
struct f2fs_node *raw_node;
f2fs: update extent tree in batches This patch introduce a new helper f2fs_update_extent_tree_range which can do extent mapping update at a specified range. The main idea is: 1) punch all mapping info in extent node(s) which are at a specified range; 2) try to merge new extent mapping with adjacent node, or failing that, insert the mapping into extent tree as a new node. In order to see the benefit, I add a function for stating time stamping count as below: uint64_t rdtsc(void) { uint32_t lo, hi; __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi)); return (uint64_t)hi << 32 | lo; } My test environment is: ubuntu, intel i7-3770, 16G memory, 256g micron ssd. truncation path: update extent cache from truncate_data_blocks_range non-truncataion path: update extent cache from other paths total: all update paths a) Removing 128MB file which has one extent node mapping whole range of file: 1. dd if=/dev/zero of=/mnt/f2fs/128M bs=1M count=128 2. sync 3. rm /mnt/f2fs/128M Before: total count average truncation: 7651022 32768 233.49 Patched: total count average truncation: 3321 33 100.64 b) fsstress: fsstress -d /mnt/f2fs -l 5 -n 100 -p 20 Test times: 5 times. Before: total count average truncation: 5812480.6 20911.6 277.95 non-truncation: 7783845.6 13440.8 579.12 total: 13596326.2 34352.4 395.79 Patched: total count average truncation: 1281283.0 3041.6 421.25 non-truncation: 7355844.4 13662.8 538.38 total: 8637127.4 16704.4 517.06 1) For the updates in truncation path: - we can see updating in batches leads total tsc and update count reducing explicitly; - besides, for a single batched updating, punching multiple extent nodes in a loop, result in executing more operations, so our average tsc increase intensively. 2) For the updates in non-truncation path: - there is a little improvement, that is because for the scenario that we just need to update in the head or tail of extent node, new interface optimize to update info in extent node directly, rather than removing original extent node for updating and then inserting that updated one into cache as new node. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-26 20:34:48 +08:00
int nr_free = 0, ofs = dn->ofs_in_node, len = count;
__le32 *addr;
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-19 00:19:06 +08:00
int base = 0;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
bool compressed_cluster = false;
int cluster_index = 0, valid_blocks = 0;
int cluster_size = F2FS_I(dn->inode)->i_cluster_size;
bool released = !atomic_read(&F2FS_I(dn->inode)->i_compr_blocks);
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-19 00:19:06 +08:00
if (IS_INODE(dn->node_page) && f2fs_has_extra_attr(dn->inode))
base = get_extra_isize(dn->inode);
raw_node = F2FS_NODE(dn->node_page);
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-19 00:19:06 +08:00
addr = blkaddr_in_node(raw_node) + base + ofs;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
/* Assumption: truncateion starts with cluster */
for (; count > 0; count--, addr++, dn->ofs_in_node++, cluster_index++) {
block_t blkaddr = le32_to_cpu(*addr);
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (f2fs_compressed_file(dn->inode) &&
!(cluster_index & (cluster_size - 1))) {
if (compressed_cluster)
f2fs_i_compr_blocks_update(dn->inode,
valid_blocks, false);
compressed_cluster = (blkaddr == COMPRESS_ADDR);
valid_blocks = 0;
}
if (blkaddr == NULL_ADDR)
continue;
dn->data_blkaddr = NULL_ADDR;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_set_data_blkaddr(dn);
f2fs: fix to do sanity check with block address in main area This patch add to do sanity check with below field: - cp_pack_total_block_count - blkaddr of data/node - extent info - Overview BUG() in verify_block_addr() when writing to a corrupted f2fs image - Reproduce (4.18 upstream kernel) - POC (poc.c) static void activity(char *mpoint) { char *foo_bar_baz; int err; static int buf[8192]; memset(buf, 0, sizeof(buf)); err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint); int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777); if (fd >= 0) { write(fd, (char *)buf, sizeof(buf)); fdatasync(fd); close(fd); } } int main(int argc, char *argv[]) { activity(argv[1]); return 0; } - Kernel message [ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3 [ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240 [ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4 [ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240 [ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d [ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202 [ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113 [ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540 [ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8 [ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540 [ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450 [ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.729171] Call Trace: [ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00 [ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0 [ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280 [ 699.729269] ? __radix_tree_replace+0xa3/0x120 [ 699.729276] __write_data_page+0x5c7/0xe30 [ 699.729291] ? kasan_check_read+0x11/0x20 [ 699.729310] ? page_mapped+0x8a/0x110 [ 699.729321] ? page_mkclean+0xe9/0x160 [ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00 [ 699.729331] ? invalid_page_referenced_vma+0x130/0x130 [ 699.729345] ? clear_page_dirty_for_io+0x332/0x450 [ 699.729351] f2fs_write_cache_pages+0x4ca/0x860 [ 699.729358] ? __write_data_page+0xe30/0xe30 [ 699.729374] ? percpu_counter_add_batch+0x22/0xa0 [ 699.729380] ? kasan_check_write+0x14/0x20 [ 699.729391] ? _raw_spin_lock+0x17/0x40 [ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30 [ 699.729413] ? iov_iter_advance+0x113/0x640 [ 699.729418] ? f2fs_write_end+0x133/0x2e0 [ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640 [ 699.729428] f2fs_write_data_pages+0x329/0x520 [ 699.729433] ? generic_perform_write+0x250/0x320 [ 699.729438] ? f2fs_write_cache_pages+0x860/0x860 [ 699.729454] ? current_time+0x110/0x110 [ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370 [ 699.729464] do_writepages+0x37/0xb0 [ 699.729468] ? f2fs_write_cache_pages+0x860/0x860 [ 699.729472] ? do_writepages+0x37/0xb0 [ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0 [ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0 [ 699.729496] ? __vfs_write+0x2b2/0x410 [ 699.729501] file_write_and_wait_range+0x66/0xb0 [ 699.729506] f2fs_do_sync_file+0x1f9/0xd90 [ 699.729511] ? truncate_partial_data_page+0x290/0x290 [ 699.729521] ? __sb_end_write+0x30/0x50 [ 699.729526] ? vfs_write+0x20f/0x260 [ 699.729530] f2fs_sync_file+0x9a/0xb0 [ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.729548] vfs_fsync_range+0x68/0x100 [ 699.729554] ? __fget_light+0xc9/0xe0 [ 699.729558] do_fsync+0x3d/0x70 [ 699.729562] __x64_sys_fdatasync+0x24/0x30 [ 699.729585] do_syscall_64+0x78/0x170 [ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 699.729613] RIP: 0033:0x7f9bf930d800 [ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24 [ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 699.729782] ------------[ cut here ]------------ [ 699.729785] kernel BUG at fs/f2fs/segment.h:654! [ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI [ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4 [ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730 [ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0 [ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283 [ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef [ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c [ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55 [ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940 [ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001 [ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.752874] Call Trace: [ 699.753386] ? f2fs_inplace_write_data+0x93/0x240 [ 699.754341] f2fs_inplace_write_data+0xd2/0x240 [ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00 [ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0 [ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280 [ 699.758209] ? __radix_tree_replace+0xa3/0x120 [ 699.759164] __write_data_page+0x5c7/0xe30 [ 699.760002] ? kasan_check_read+0x11/0x20 [ 699.760823] ? page_mapped+0x8a/0x110 [ 699.761573] ? page_mkclean+0xe9/0x160 [ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00 [ 699.763332] ? invalid_page_referenced_vma+0x130/0x130 [ 699.764374] ? clear_page_dirty_for_io+0x332/0x450 [ 699.765347] f2fs_write_cache_pages+0x4ca/0x860 [ 699.766276] ? __write_data_page+0xe30/0xe30 [ 699.767161] ? percpu_counter_add_batch+0x22/0xa0 [ 699.768112] ? kasan_check_write+0x14/0x20 [ 699.768951] ? _raw_spin_lock+0x17/0x40 [ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30 [ 699.770885] ? iov_iter_advance+0x113/0x640 [ 699.771743] ? f2fs_write_end+0x133/0x2e0 [ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640 [ 699.773680] f2fs_write_data_pages+0x329/0x520 [ 699.774603] ? generic_perform_write+0x250/0x320 [ 699.775544] ? f2fs_write_cache_pages+0x860/0x860 [ 699.776510] ? current_time+0x110/0x110 [ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370 [ 699.778279] do_writepages+0x37/0xb0 [ 699.779026] ? f2fs_write_cache_pages+0x860/0x860 [ 699.779978] ? do_writepages+0x37/0xb0 [ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0 [ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0 [ 699.782820] ? __vfs_write+0x2b2/0x410 [ 699.783597] file_write_and_wait_range+0x66/0xb0 [ 699.784540] f2fs_do_sync_file+0x1f9/0xd90 [ 699.785381] ? truncate_partial_data_page+0x290/0x290 [ 699.786415] ? __sb_end_write+0x30/0x50 [ 699.787204] ? vfs_write+0x20f/0x260 [ 699.787941] f2fs_sync_file+0x9a/0xb0 [ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.789572] vfs_fsync_range+0x68/0x100 [ 699.790360] ? __fget_light+0xc9/0xe0 [ 699.791128] do_fsync+0x3d/0x70 [ 699.791779] __x64_sys_fdatasync+0x24/0x30 [ 699.792614] do_syscall_64+0x78/0x170 [ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 699.794406] RIP: 0033:0x7f9bf930d800 [ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24 [ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]--- [ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730 [ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0 [ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283 [ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef [ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c [ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55 [ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940 [ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001 [ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.835556] ================================================================== [ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0 [ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309 [ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4 [ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.843475] Call Trace: [ 699.843982] dump_stack+0x7b/0xb5 [ 699.844661] print_address_description+0x70/0x290 [ 699.845607] kasan_report+0x291/0x390 [ 699.846351] ? update_stack_state+0x38c/0x3e0 [ 699.853831] __asan_load8+0x54/0x90 [ 699.854569] update_stack_state+0x38c/0x3e0 [ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20 [ 699.856601] ? __save_stack_trace+0x5e/0x100 [ 699.857476] unwind_next_frame.part.5+0x18e/0x490 [ 699.858448] ? unwind_dump+0x290/0x290 [ 699.859217] ? clear_page_dirty_for_io+0x332/0x450 [ 699.860185] __unwind_start+0x106/0x190 [ 699.860974] __save_stack_trace+0x5e/0x100 [ 699.861808] ? __save_stack_trace+0x5e/0x100 [ 699.862691] ? unlink_anon_vmas+0xba/0x2c0 [ 699.863525] save_stack_trace+0x1f/0x30 [ 699.864312] save_stack+0x46/0xd0 [ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420 [ 699.865990] ? flush_tlb_mm_range+0x15e/0x220 [ 699.866889] ? kasan_check_write+0x14/0x20 [ 699.867724] ? __dec_node_state+0x92/0xb0 [ 699.868543] ? lock_page_memcg+0x85/0xf0 [ 699.869350] ? unlock_page_memcg+0x16/0x80 [ 699.870185] ? page_remove_rmap+0x198/0x520 [ 699.871048] ? mark_page_accessed+0x133/0x200 [ 699.871930] ? _cond_resched+0x1a/0x50 [ 699.872700] ? unmap_page_range+0xcd4/0xe50 [ 699.873551] ? rb_next+0x58/0x80 [ 699.874217] ? rb_next+0x58/0x80 [ 699.874895] __kasan_slab_free+0x13c/0x1a0 [ 699.875734] ? unlink_anon_vmas+0xba/0x2c0 [ 699.876563] kasan_slab_free+0xe/0x10 [ 699.877315] kmem_cache_free+0x89/0x1e0 [ 699.878095] unlink_anon_vmas+0xba/0x2c0 [ 699.878913] free_pgtables+0x101/0x1b0 [ 699.879677] exit_mmap+0x146/0x2a0 [ 699.880378] ? __ia32_sys_munmap+0x50/0x50 [ 699.881214] ? kasan_check_read+0x11/0x20 [ 699.882052] ? mm_update_next_owner+0x322/0x380 [ 699.882985] mmput+0x8b/0x1d0 [ 699.883602] do_exit+0x43a/0x1390 [ 699.884288] ? mm_update_next_owner+0x380/0x380 [ 699.885212] ? f2fs_sync_file+0x9a/0xb0 [ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.886877] ? vfs_fsync_range+0x68/0x100 [ 699.887694] ? __fget_light+0xc9/0xe0 [ 699.888442] ? do_fsync+0x3d/0x70 [ 699.889118] ? __x64_sys_fdatasync+0x24/0x30 [ 699.889996] rewind_stack_do_exit+0x17/0x20 [ 699.890860] RIP: 0033:0x7f9bf930d800 [ 699.891585] Code: Bad RIP value. [ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.901241] The buggy address belongs to the page: [ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 699.903811] flags: 0x2ffff0000000000() [ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000 [ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000 [ 699.907673] page dumped because: kasan: bad access detected [ 699.909108] Memory state around the buggy address: [ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00 [ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2 [ 699.914392] ^ [ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00 [ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00 [ 699.918634] ================================================================== - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644 Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (__is_valid_data_blkaddr(blkaddr)) {
if (!f2fs_is_valid_blkaddr(sbi, blkaddr,
f2fs: introduce DATA_GENERIC_ENHANCE Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check whether @blkaddr locates in main area or not. That check is weak, since the block address in range of main area can point to the address which is not valid in segment info table, and we can not detect such condition, we may suffer worse corruption as system continues running. So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check which trigger SIT bitmap check rather than only range check. This patch did below changes as wel: - set SBI_NEED_FSCK in f2fs_is_valid_blkaddr(). - get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid. - introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check. - spread blkaddr check in: * f2fs_get_node_info() * __read_out_blkaddrs() * f2fs_submit_page_read() * ra_data_block() * do_recover_data() This patch can fix bug reported from bugzilla below: https://bugzilla.kernel.org/show_bug.cgi?id=203215 https://bugzilla.kernel.org/show_bug.cgi?id=203223 https://bugzilla.kernel.org/show_bug.cgi?id=203231 https://bugzilla.kernel.org/show_bug.cgi?id=203235 https://bugzilla.kernel.org/show_bug.cgi?id=203241 = Update by Jaegeuk Kim = DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths. But, xfstest/generic/446 compalins some generated kernel messages saying invalid bitmap was detected when reading a block. The reaons is, when we get the block addresses from extent_cache, there is no lock to synchronize it from truncating the blocks in parallel. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
DATA_GENERIC_ENHANCE))
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
continue;
if (compressed_cluster)
valid_blocks++;
}
f2fs: fix to do sanity check with block address in main area This patch add to do sanity check with below field: - cp_pack_total_block_count - blkaddr of data/node - extent info - Overview BUG() in verify_block_addr() when writing to a corrupted f2fs image - Reproduce (4.18 upstream kernel) - POC (poc.c) static void activity(char *mpoint) { char *foo_bar_baz; int err; static int buf[8192]; memset(buf, 0, sizeof(buf)); err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint); int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777); if (fd >= 0) { write(fd, (char *)buf, sizeof(buf)); fdatasync(fd); close(fd); } } int main(int argc, char *argv[]) { activity(argv[1]); return 0; } - Kernel message [ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3 [ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240 [ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4 [ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240 [ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d [ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202 [ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113 [ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540 [ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8 [ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540 [ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450 [ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.729171] Call Trace: [ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00 [ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0 [ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280 [ 699.729269] ? __radix_tree_replace+0xa3/0x120 [ 699.729276] __write_data_page+0x5c7/0xe30 [ 699.729291] ? kasan_check_read+0x11/0x20 [ 699.729310] ? page_mapped+0x8a/0x110 [ 699.729321] ? page_mkclean+0xe9/0x160 [ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00 [ 699.729331] ? invalid_page_referenced_vma+0x130/0x130 [ 699.729345] ? clear_page_dirty_for_io+0x332/0x450 [ 699.729351] f2fs_write_cache_pages+0x4ca/0x860 [ 699.729358] ? __write_data_page+0xe30/0xe30 [ 699.729374] ? percpu_counter_add_batch+0x22/0xa0 [ 699.729380] ? kasan_check_write+0x14/0x20 [ 699.729391] ? _raw_spin_lock+0x17/0x40 [ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30 [ 699.729413] ? iov_iter_advance+0x113/0x640 [ 699.729418] ? f2fs_write_end+0x133/0x2e0 [ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640 [ 699.729428] f2fs_write_data_pages+0x329/0x520 [ 699.729433] ? generic_perform_write+0x250/0x320 [ 699.729438] ? f2fs_write_cache_pages+0x860/0x860 [ 699.729454] ? current_time+0x110/0x110 [ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370 [ 699.729464] do_writepages+0x37/0xb0 [ 699.729468] ? f2fs_write_cache_pages+0x860/0x860 [ 699.729472] ? do_writepages+0x37/0xb0 [ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0 [ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0 [ 699.729496] ? __vfs_write+0x2b2/0x410 [ 699.729501] file_write_and_wait_range+0x66/0xb0 [ 699.729506] f2fs_do_sync_file+0x1f9/0xd90 [ 699.729511] ? truncate_partial_data_page+0x290/0x290 [ 699.729521] ? __sb_end_write+0x30/0x50 [ 699.729526] ? vfs_write+0x20f/0x260 [ 699.729530] f2fs_sync_file+0x9a/0xb0 [ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.729548] vfs_fsync_range+0x68/0x100 [ 699.729554] ? __fget_light+0xc9/0xe0 [ 699.729558] do_fsync+0x3d/0x70 [ 699.729562] __x64_sys_fdatasync+0x24/0x30 [ 699.729585] do_syscall_64+0x78/0x170 [ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 699.729613] RIP: 0033:0x7f9bf930d800 [ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24 [ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 699.729782] ------------[ cut here ]------------ [ 699.729785] kernel BUG at fs/f2fs/segment.h:654! [ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI [ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4 [ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730 [ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0 [ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283 [ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef [ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c [ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55 [ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940 [ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001 [ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.752874] Call Trace: [ 699.753386] ? f2fs_inplace_write_data+0x93/0x240 [ 699.754341] f2fs_inplace_write_data+0xd2/0x240 [ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00 [ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0 [ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280 [ 699.758209] ? __radix_tree_replace+0xa3/0x120 [ 699.759164] __write_data_page+0x5c7/0xe30 [ 699.760002] ? kasan_check_read+0x11/0x20 [ 699.760823] ? page_mapped+0x8a/0x110 [ 699.761573] ? page_mkclean+0xe9/0x160 [ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00 [ 699.763332] ? invalid_page_referenced_vma+0x130/0x130 [ 699.764374] ? clear_page_dirty_for_io+0x332/0x450 [ 699.765347] f2fs_write_cache_pages+0x4ca/0x860 [ 699.766276] ? __write_data_page+0xe30/0xe30 [ 699.767161] ? percpu_counter_add_batch+0x22/0xa0 [ 699.768112] ? kasan_check_write+0x14/0x20 [ 699.768951] ? _raw_spin_lock+0x17/0x40 [ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30 [ 699.770885] ? iov_iter_advance+0x113/0x640 [ 699.771743] ? f2fs_write_end+0x133/0x2e0 [ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640 [ 699.773680] f2fs_write_data_pages+0x329/0x520 [ 699.774603] ? generic_perform_write+0x250/0x320 [ 699.775544] ? f2fs_write_cache_pages+0x860/0x860 [ 699.776510] ? current_time+0x110/0x110 [ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370 [ 699.778279] do_writepages+0x37/0xb0 [ 699.779026] ? f2fs_write_cache_pages+0x860/0x860 [ 699.779978] ? do_writepages+0x37/0xb0 [ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0 [ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0 [ 699.782820] ? __vfs_write+0x2b2/0x410 [ 699.783597] file_write_and_wait_range+0x66/0xb0 [ 699.784540] f2fs_do_sync_file+0x1f9/0xd90 [ 699.785381] ? truncate_partial_data_page+0x290/0x290 [ 699.786415] ? __sb_end_write+0x30/0x50 [ 699.787204] ? vfs_write+0x20f/0x260 [ 699.787941] f2fs_sync_file+0x9a/0xb0 [ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.789572] vfs_fsync_range+0x68/0x100 [ 699.790360] ? __fget_light+0xc9/0xe0 [ 699.791128] do_fsync+0x3d/0x70 [ 699.791779] __x64_sys_fdatasync+0x24/0x30 [ 699.792614] do_syscall_64+0x78/0x170 [ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 699.794406] RIP: 0033:0x7f9bf930d800 [ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24 [ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]--- [ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730 [ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0 [ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283 [ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef [ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c [ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55 [ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940 [ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001 [ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.835556] ================================================================== [ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0 [ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309 [ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4 [ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.843475] Call Trace: [ 699.843982] dump_stack+0x7b/0xb5 [ 699.844661] print_address_description+0x70/0x290 [ 699.845607] kasan_report+0x291/0x390 [ 699.846351] ? update_stack_state+0x38c/0x3e0 [ 699.853831] __asan_load8+0x54/0x90 [ 699.854569] update_stack_state+0x38c/0x3e0 [ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20 [ 699.856601] ? __save_stack_trace+0x5e/0x100 [ 699.857476] unwind_next_frame.part.5+0x18e/0x490 [ 699.858448] ? unwind_dump+0x290/0x290 [ 699.859217] ? clear_page_dirty_for_io+0x332/0x450 [ 699.860185] __unwind_start+0x106/0x190 [ 699.860974] __save_stack_trace+0x5e/0x100 [ 699.861808] ? __save_stack_trace+0x5e/0x100 [ 699.862691] ? unlink_anon_vmas+0xba/0x2c0 [ 699.863525] save_stack_trace+0x1f/0x30 [ 699.864312] save_stack+0x46/0xd0 [ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420 [ 699.865990] ? flush_tlb_mm_range+0x15e/0x220 [ 699.866889] ? kasan_check_write+0x14/0x20 [ 699.867724] ? __dec_node_state+0x92/0xb0 [ 699.868543] ? lock_page_memcg+0x85/0xf0 [ 699.869350] ? unlock_page_memcg+0x16/0x80 [ 699.870185] ? page_remove_rmap+0x198/0x520 [ 699.871048] ? mark_page_accessed+0x133/0x200 [ 699.871930] ? _cond_resched+0x1a/0x50 [ 699.872700] ? unmap_page_range+0xcd4/0xe50 [ 699.873551] ? rb_next+0x58/0x80 [ 699.874217] ? rb_next+0x58/0x80 [ 699.874895] __kasan_slab_free+0x13c/0x1a0 [ 699.875734] ? unlink_anon_vmas+0xba/0x2c0 [ 699.876563] kasan_slab_free+0xe/0x10 [ 699.877315] kmem_cache_free+0x89/0x1e0 [ 699.878095] unlink_anon_vmas+0xba/0x2c0 [ 699.878913] free_pgtables+0x101/0x1b0 [ 699.879677] exit_mmap+0x146/0x2a0 [ 699.880378] ? __ia32_sys_munmap+0x50/0x50 [ 699.881214] ? kasan_check_read+0x11/0x20 [ 699.882052] ? mm_update_next_owner+0x322/0x380 [ 699.882985] mmput+0x8b/0x1d0 [ 699.883602] do_exit+0x43a/0x1390 [ 699.884288] ? mm_update_next_owner+0x380/0x380 [ 699.885212] ? f2fs_sync_file+0x9a/0xb0 [ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.886877] ? vfs_fsync_range+0x68/0x100 [ 699.887694] ? __fget_light+0xc9/0xe0 [ 699.888442] ? do_fsync+0x3d/0x70 [ 699.889118] ? __x64_sys_fdatasync+0x24/0x30 [ 699.889996] rewind_stack_do_exit+0x17/0x20 [ 699.890860] RIP: 0033:0x7f9bf930d800 [ 699.891585] Code: Bad RIP value. [ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.901241] The buggy address belongs to the page: [ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 699.903811] flags: 0x2ffff0000000000() [ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000 [ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000 [ 699.907673] page dumped because: kasan: bad access detected [ 699.909108] Memory state around the buggy address: [ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00 [ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2 [ 699.914392] ^ [ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00 [ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00 [ 699.918634] ================================================================== - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644 Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
if (dn->ofs_in_node == 0 && IS_INODE(dn->node_page))
clear_inode_flag(dn->inode, FI_FIRST_BLOCK_WRITTEN);
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs_invalidate_blocks(sbi, blkaddr);
if (!released || blkaddr != COMPRESS_ADDR)
nr_free++;
}
f2fs: update extent tree in batches This patch introduce a new helper f2fs_update_extent_tree_range which can do extent mapping update at a specified range. The main idea is: 1) punch all mapping info in extent node(s) which are at a specified range; 2) try to merge new extent mapping with adjacent node, or failing that, insert the mapping into extent tree as a new node. In order to see the benefit, I add a function for stating time stamping count as below: uint64_t rdtsc(void) { uint32_t lo, hi; __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi)); return (uint64_t)hi << 32 | lo; } My test environment is: ubuntu, intel i7-3770, 16G memory, 256g micron ssd. truncation path: update extent cache from truncate_data_blocks_range non-truncataion path: update extent cache from other paths total: all update paths a) Removing 128MB file which has one extent node mapping whole range of file: 1. dd if=/dev/zero of=/mnt/f2fs/128M bs=1M count=128 2. sync 3. rm /mnt/f2fs/128M Before: total count average truncation: 7651022 32768 233.49 Patched: total count average truncation: 3321 33 100.64 b) fsstress: fsstress -d /mnt/f2fs -l 5 -n 100 -p 20 Test times: 5 times. Before: total count average truncation: 5812480.6 20911.6 277.95 non-truncation: 7783845.6 13440.8 579.12 total: 13596326.2 34352.4 395.79 Patched: total count average truncation: 1281283.0 3041.6 421.25 non-truncation: 7355844.4 13662.8 538.38 total: 8637127.4 16704.4 517.06 1) For the updates in truncation path: - we can see updating in batches leads total tsc and update count reducing explicitly; - besides, for a single batched updating, punching multiple extent nodes in a loop, result in executing more operations, so our average tsc increase intensively. 2) For the updates in non-truncation path: - there is a little improvement, that is because for the scenario that we just need to update in the head or tail of extent node, new interface optimize to update info in extent node directly, rather than removing original extent node for updating and then inserting that updated one into cache as new node. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-26 20:34:48 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (compressed_cluster)
f2fs_i_compr_blocks_update(dn->inode, valid_blocks, false);
if (nr_free) {
f2fs: update extent tree in batches This patch introduce a new helper f2fs_update_extent_tree_range which can do extent mapping update at a specified range. The main idea is: 1) punch all mapping info in extent node(s) which are at a specified range; 2) try to merge new extent mapping with adjacent node, or failing that, insert the mapping into extent tree as a new node. In order to see the benefit, I add a function for stating time stamping count as below: uint64_t rdtsc(void) { uint32_t lo, hi; __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi)); return (uint64_t)hi << 32 | lo; } My test environment is: ubuntu, intel i7-3770, 16G memory, 256g micron ssd. truncation path: update extent cache from truncate_data_blocks_range non-truncataion path: update extent cache from other paths total: all update paths a) Removing 128MB file which has one extent node mapping whole range of file: 1. dd if=/dev/zero of=/mnt/f2fs/128M bs=1M count=128 2. sync 3. rm /mnt/f2fs/128M Before: total count average truncation: 7651022 32768 233.49 Patched: total count average truncation: 3321 33 100.64 b) fsstress: fsstress -d /mnt/f2fs -l 5 -n 100 -p 20 Test times: 5 times. Before: total count average truncation: 5812480.6 20911.6 277.95 non-truncation: 7783845.6 13440.8 579.12 total: 13596326.2 34352.4 395.79 Patched: total count average truncation: 1281283.0 3041.6 421.25 non-truncation: 7355844.4 13662.8 538.38 total: 8637127.4 16704.4 517.06 1) For the updates in truncation path: - we can see updating in batches leads total tsc and update count reducing explicitly; - besides, for a single batched updating, punching multiple extent nodes in a loop, result in executing more operations, so our average tsc increase intensively. 2) For the updates in non-truncation path: - there is a little improvement, that is because for the scenario that we just need to update in the head or tail of extent node, new interface optimize to update info in extent node directly, rather than removing original extent node for updating and then inserting that updated one into cache as new node. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-26 20:34:48 +08:00
pgoff_t fofs;
/*
* once we invalidate valid blkaddr in range [ofs, ofs + count],
* we will invalidate all blkaddr in the whole range.
*/
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
fofs = f2fs_start_bidx_of_node(ofs_of_node(dn->node_page),
dn->inode) + ofs;
f2fs: update extent tree in batches This patch introduce a new helper f2fs_update_extent_tree_range which can do extent mapping update at a specified range. The main idea is: 1) punch all mapping info in extent node(s) which are at a specified range; 2) try to merge new extent mapping with adjacent node, or failing that, insert the mapping into extent tree as a new node. In order to see the benefit, I add a function for stating time stamping count as below: uint64_t rdtsc(void) { uint32_t lo, hi; __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi)); return (uint64_t)hi << 32 | lo; } My test environment is: ubuntu, intel i7-3770, 16G memory, 256g micron ssd. truncation path: update extent cache from truncate_data_blocks_range non-truncataion path: update extent cache from other paths total: all update paths a) Removing 128MB file which has one extent node mapping whole range of file: 1. dd if=/dev/zero of=/mnt/f2fs/128M bs=1M count=128 2. sync 3. rm /mnt/f2fs/128M Before: total count average truncation: 7651022 32768 233.49 Patched: total count average truncation: 3321 33 100.64 b) fsstress: fsstress -d /mnt/f2fs -l 5 -n 100 -p 20 Test times: 5 times. Before: total count average truncation: 5812480.6 20911.6 277.95 non-truncation: 7783845.6 13440.8 579.12 total: 13596326.2 34352.4 395.79 Patched: total count average truncation: 1281283.0 3041.6 421.25 non-truncation: 7355844.4 13662.8 538.38 total: 8637127.4 16704.4 517.06 1) For the updates in truncation path: - we can see updating in batches leads total tsc and update count reducing explicitly; - besides, for a single batched updating, punching multiple extent nodes in a loop, result in executing more operations, so our average tsc increase intensively. 2) For the updates in non-truncation path: - there is a little improvement, that is because for the scenario that we just need to update in the head or tail of extent node, new interface optimize to update info in extent node directly, rather than removing original extent node for updating and then inserting that updated one into cache as new node. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-26 20:34:48 +08:00
f2fs_update_extent_cache_range(dn, fofs, 0, len);
dec_valid_block_count(sbi, dn->inode, nr_free);
}
dn->ofs_in_node = ofs;
f2fs_update_time(sbi, REQ_TIME);
trace_f2fs_truncate_data_blocks_range(dn->inode, dn->nid,
dn->ofs_in_node, nr_free);
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
void f2fs_truncate_data_blocks(struct dnode_of_data *dn)
{
f2fs_truncate_data_blocks_range(dn, ADDRS_PER_BLOCK(dn->inode));
}
static int truncate_partial_data_page(struct inode *inode, u64 from,
bool cache_only)
{
loff_t offset = from & (PAGE_SIZE - 1);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pgoff_t index = from >> PAGE_SHIFT;
struct address_space *mapping = inode->i_mapping;
struct page *page;
if (!offset && !cache_only)
return 0;
if (cache_only) {
page = find_lock_page(mapping, index);
if (page && PageUptodate(page))
goto truncate_out;
f2fs_put_page(page, 1);
return 0;
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
page = f2fs_get_lock_data_page(inode, index, true);
if (IS_ERR(page))
return PTR_ERR(page) == -ENOENT ? 0 : PTR_ERR(page);
truncate_out:
f2fs_wait_on_page_writeback(page, DATA, true, true);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
zero_user(page, offset, PAGE_SIZE - offset);
/* An encrypted inode should have a key and truncate the last page. */
f2fs_bug_on(F2FS_I_SB(inode), cache_only && IS_ENCRYPTED(inode));
if (!cache_only)
set_page_dirty(page);
f2fs_put_page(page, 1);
return 0;
}
int f2fs_do_truncate_blocks(struct inode *inode, u64 from, bool lock)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct dnode_of_data dn;
pgoff_t free_from;
int count = 0, err = 0;
struct page *ipage;
bool truncate_page = false;
trace_f2fs_truncate_blocks_enter(inode, from);
free_from = (pgoff_t)F2FS_BLK_ALIGN(from);
if (free_from >= max_file_blocks(inode))
goto free_partial;
if (lock)
f2fs_lock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
ipage = f2fs_get_node_page(sbi, inode->i_ino);
if (IS_ERR(ipage)) {
err = PTR_ERR(ipage);
goto out;
}
if (f2fs_has_inline_data(inode)) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_truncate_inline_inode(inode, ipage, from);
f2fs_put_page(ipage, 1);
truncate_page = true;
goto out;
}
set_new_dnode(&dn, inode, ipage, NULL, 0);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
err = f2fs_get_dnode_of_data(&dn, free_from, LOOKUP_NODE_RA);
if (err) {
if (err == -ENOENT)
goto free_next;
goto out;
}
count = ADDRS_PER_PAGE(dn.node_page, inode);
count -= dn.ofs_in_node;
f2fs_bug_on(sbi, count < 0);
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 15:21:29 +08:00
if (dn.ofs_in_node || IS_INODE(dn.node_page)) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_truncate_data_blocks_range(&dn, count);
free_from += count;
}
f2fs_put_dnode(&dn);
free_next:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
err = f2fs_truncate_inode_blocks(inode, free_from);
out:
if (lock)
f2fs_unlock_op(sbi);
free_partial:
/* lastly zero out the first data page */
if (!err)
err = truncate_partial_data_page(inode, from, truncate_page);
trace_f2fs_truncate_blocks_exit(inode, err);
return err;
}
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
int f2fs_truncate_blocks(struct inode *inode, u64 from, bool lock)
{
u64 free_from = from;
int err;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
#ifdef CONFIG_F2FS_FS_COMPRESSION
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
/*
* for compressed file, only support cluster size
* aligned truncation.
*/
if (f2fs_compressed_file(inode))
free_from = round_up(from,
F2FS_I(inode)->i_cluster_size << PAGE_SHIFT);
#endif
err = f2fs_do_truncate_blocks(inode, free_from, lock);
if (err)
return err;
#ifdef CONFIG_F2FS_FS_COMPRESSION
/*
* For compressed file, after release compress blocks, don't allow write
* direct, but we should allow write direct after truncate to zero.
*/
if (f2fs_compressed_file(inode) && !free_from
&& is_inode_flag_set(inode, FI_COMPRESS_RELEASED))
clear_inode_flag(inode, FI_COMPRESS_RELEASED);
if (from != free_from) {
err = f2fs_truncate_partial_cluster(inode, from, lock);
if (err)
return err;
}
#endif
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
return 0;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
}
int f2fs_truncate(struct inode *inode)
{
int err;
if (unlikely(f2fs_cp_error(F2FS_I_SB(inode))))
return -EIO;
if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
S_ISLNK(inode->i_mode)))
return 0;
trace_f2fs_truncate(inode);
if (time_to_inject(F2FS_I_SB(inode), FAULT_TRUNCATE)) {
f2fs_show_injection_info(F2FS_I_SB(inode), FAULT_TRUNCATE);
return -EIO;
}
err = f2fs_dquot_initialize(inode);
f2fs: fix to avoid inconsistent quota data Occasionally, quota data may be corrupted detected by fsck: Info: checkpoint state = 45 : crc compacted_summary unmount [QUOTA WARNING] Usage inconsistent for ID 0:actual (1543036928, 762) != expected (1543032832, 762) [ASSERT] (fsck_chk_quota_files:1986) --> Quota file is missing or invalid quota file content found. [QUOTA WARNING] Usage inconsistent for ID 0:actual (1352478720, 344) != expected (1352474624, 344) [ASSERT] (fsck_chk_quota_files:1986) --> Quota file is missing or invalid quota file content found. [FSCK] Unreachable nat entries [Ok..] [0x0] [FSCK] SIT valid block bitmap checking [Ok..] [FSCK] Hard link checking for regular file [Ok..] [0x0] [FSCK] valid_block_count matching with CP [Ok..] [0xdf299] [FSCK] valid_node_count matcing with CP (de lookup) [Ok..] [0x2b01] [FSCK] valid_node_count matcing with CP (nat lookup) [Ok..] [0x2b01] [FSCK] valid_inode_count matched with CP [Ok..] [0x2665] [FSCK] free segment_count matched with CP [Ok..] [0xcb04] [FSCK] next block offset is free [Ok..] [FSCK] fixing SIT types [FSCK] other corrupted bugs [Fail] The root cause is: If we open file w/ readonly flag, disk quota info won't be initialized for this file, however, following mmap() will force to convert inline inode via f2fs_convert_inline_inode(), which may increase block usage for this inode w/o updating quota data, it causes inconsistent disk quota info. The issue will happen in following stack: open(file, O_RDONLY) mmap(file) - f2fs_convert_inline_inode - f2fs_convert_inline_page - f2fs_reserve_block - f2fs_reserve_new_block - f2fs_reserve_new_blocks - f2fs_i_blocks_write - dquot_claim_block inode->i_blocks increase, but the dqb_curspace keep the size for the dquots is NULL. To fix this issue, let's call dquot_initialize() anyway in both f2fs_truncate() and f2fs_convert_inline_inode() functions to avoid potential inconsistent quota data issue. Fixes: 0abd675e97e6 ("f2fs: support plain user/group quota") Signed-off-by: Daiyue Zhang <zhangdaiyue1@huawei.com> Signed-off-by: Dehe Gu <gudehe@huawei.com> Signed-off-by: Junchao Jiang <jiangjunchao1@huawei.com> Signed-off-by: Ge Qiu <qiuge@huawei.com> Signed-off-by: Yi Chen <chenyi77@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-28 17:02:56 +08:00
if (err)
return err;
/* we should check inline_data size */
if (!f2fs_may_inline_data(inode)) {
err = f2fs_convert_inline_inode(inode);
if (err)
return err;
}
err = f2fs_truncate_blocks(inode, i_size_read(inode), true);
if (err)
return err;
inode->i_mtime = inode->i_ctime = current_time(inode);
f2fs_mark_inode_dirty_sync(inode, false);
return 0;
}
int f2fs_getattr(struct user_namespace *mnt_userns, const struct path *path,
struct kstat *stat, u32 request_mask, unsigned int query_flags)
{
statx: Add a system call to make enhanced file info available Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-02-01 00:46:22 +08:00
struct inode *inode = d_inode(path->dentry);
struct f2fs_inode_info *fi = F2FS_I(inode);
struct f2fs_inode *ri = NULL;
unsigned int flags;
if (f2fs_has_extra_attr(inode) &&
f2fs_sb_has_inode_crtime(F2FS_I_SB(inode)) &&
F2FS_FITS_IN_INODE(ri, fi->i_extra_isize, i_crtime)) {
stat->result_mask |= STATX_BTIME;
stat->btime.tv_sec = fi->i_crtime.tv_sec;
stat->btime.tv_nsec = fi->i_crtime.tv_nsec;
}
flags = fi->i_flags;
if (flags & F2FS_COMPR_FL)
stat->attributes |= STATX_ATTR_COMPRESSED;
if (flags & F2FS_APPEND_FL)
stat->attributes |= STATX_ATTR_APPEND;
if (IS_ENCRYPTED(inode))
stat->attributes |= STATX_ATTR_ENCRYPTED;
if (flags & F2FS_IMMUTABLE_FL)
stat->attributes |= STATX_ATTR_IMMUTABLE;
if (flags & F2FS_NODUMP_FL)
stat->attributes |= STATX_ATTR_NODUMP;
if (IS_VERITY(inode))
stat->attributes |= STATX_ATTR_VERITY;
stat->attributes_mask |= (STATX_ATTR_COMPRESSED |
STATX_ATTR_APPEND |
STATX_ATTR_ENCRYPTED |
STATX_ATTR_IMMUTABLE |
STATX_ATTR_NODUMP |
STATX_ATTR_VERITY);
generic_fillattr(mnt_userns, inode, stat);
/* we need to show initial sectors used for inline_data/dentries */
if ((S_ISREG(inode->i_mode) && f2fs_has_inline_data(inode)) ||
f2fs_has_inline_dentry(inode))
stat->blocks += (stat->size + 511) >> 9;
return 0;
}
#ifdef CONFIG_F2FS_FS_POSIX_ACL
acl: handle idmapped mounts The posix acl permission checking helpers determine whether a caller is privileged over an inode according to the acls associated with the inode. Add helpers that make it possible to handle acls on idmapped mounts. The vfs and the filesystems targeted by this first iteration make use of posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to translate basic posix access and default permissions such as the ACL_USER and ACL_GROUP type according to the initial user namespace (or the superblock's user namespace) to and from the caller's current user namespace. Adapt these two helpers to handle idmapped mounts whereby we either map from or into the mount's user namespace depending on in which direction we're translating. Similarly, cap_convert_nscap() is used by the vfs to translate user namespace and non-user namespace aware filesystem capabilities from the superblock's user namespace to the caller's user namespace. Enable it to handle idmapped mounts by accounting for the mount's user namespace. In addition the fileystems targeted in the first iteration of this patch series make use of the posix_acl_chmod() and, posix_acl_update_mode() helpers. Both helpers perform permission checks on the target inode. Let them handle idmapped mounts. These two helpers are called when posix acls are set by the respective filesystems to handle this case we extend the ->set() method to take an additional user namespace argument to pass the mount's user namespace down. Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 21:19:27 +08:00
static void __setattr_copy(struct user_namespace *mnt_userns,
struct inode *inode, const struct iattr *attr)
{
unsigned int ia_valid = attr->ia_valid;
if (ia_valid & ATTR_UID)
inode->i_uid = attr->ia_uid;
if (ia_valid & ATTR_GID)
inode->i_gid = attr->ia_gid;
if (ia_valid & ATTR_ATIME)
inode->i_atime = attr->ia_atime;
if (ia_valid & ATTR_MTIME)
inode->i_mtime = attr->ia_mtime;
if (ia_valid & ATTR_CTIME)
inode->i_ctime = attr->ia_ctime;
if (ia_valid & ATTR_MODE) {
umode_t mode = attr->ia_mode;
kgid_t kgid = i_gid_into_mnt(mnt_userns, inode);
idmapped-mounts-v5.12 -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f 4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg= =yPaw -----END PGP SIGNATURE----- Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull idmapped mounts from Christian Brauner: "This introduces idmapped mounts which has been in the making for some time. Simply put, different mounts can expose the same file or directory with different ownership. This initial implementation comes with ports for fat, ext4 and with Christoph's port for xfs with more filesystems being actively worked on by independent people and maintainers. Idmapping mounts handle a wide range of long standing use-cases. Here are just a few: - Idmapped mounts make it possible to easily share files between multiple users or multiple machines especially in complex scenarios. For example, idmapped mounts will be used in the implementation of portable home directories in systemd-homed.service(8) where they allow users to move their home directory to an external storage device and use it on multiple computers where they are assigned different uids and gids. This effectively makes it possible to assign random uids and gids at login time. - It is possible to share files from the host with unprivileged containers without having to change ownership permanently through chown(2). - It is possible to idmap a container's rootfs and without having to mangle every file. For example, Chromebooks use it to share the user's Download folder with their unprivileged containers in their Linux subsystem. - It is possible to share files between containers with non-overlapping idmappings. - Filesystem that lack a proper concept of ownership such as fat can use idmapped mounts to implement discretionary access (DAC) permission checking. - They allow users to efficiently changing ownership on a per-mount basis without having to (recursively) chown(2) all files. In contrast to chown (2) changing ownership of large sets of files is instantenous with idmapped mounts. This is especially useful when ownership of a whole root filesystem of a virtual machine or container is changed. With idmapped mounts a single syscall mount_setattr syscall will be sufficient to change the ownership of all files. - Idmapped mounts always take the current ownership into account as idmappings specify what a given uid or gid is supposed to be mapped to. This contrasts with the chown(2) syscall which cannot by itself take the current ownership of the files it changes into account. It simply changes the ownership to the specified uid and gid. This is especially problematic when recursively chown(2)ing a large set of files which is commong with the aforementioned portable home directory and container and vm scenario. - Idmapped mounts allow to change ownership locally, restricting it to specific mounts, and temporarily as the ownership changes only apply as long as the mount exists. Several userspace projects have either already put up patches and pull-requests for this feature or will do so should you decide to pull this: - systemd: In a wide variety of scenarios but especially right away in their implementation of portable home directories. https://systemd.io/HOME_DIRECTORY/ - container runtimes: containerd, runC, LXD:To share data between host and unprivileged containers, unprivileged and privileged containers, etc. The pull request for idmapped mounts support in containerd, the default Kubernetes runtime is already up for quite a while now: https://github.com/containerd/containerd/pull/4734 - The virtio-fs developers and several users have expressed interest in using this feature with virtual machines once virtio-fs is ported. - ChromeOS: Sharing host-directories with unprivileged containers. I've tightly synced with all those projects and all of those listed here have also expressed their need/desire for this feature on the mailing list. For more info on how people use this there's a bunch of talks about this too. Here's just two recent ones: https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf https://fosdem.org/2021/schedule/event/containers_idmap/ This comes with an extensive xfstests suite covering both ext4 and xfs: https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts It covers truncation, creation, opening, xattrs, vfscaps, setid execution, setgid inheritance and more both with idmapped and non-idmapped mounts. It already helped to discover an unrelated xfs setgid inheritance bug which has since been fixed in mainline. It will be sent for inclusion with the xfstests project should you decide to merge this. In order to support per-mount idmappings vfsmounts are marked with user namespaces. The idmapping of the user namespace will be used to map the ids of vfs objects when they are accessed through that mount. By default all vfsmounts are marked with the initial user namespace. The initial user namespace is used to indicate that a mount is not idmapped. All operations behave as before and this is verified in the testsuite. Based on prior discussions we want to attach the whole user namespace and not just a dedicated idmapping struct. This allows us to reuse all the helpers that already exist for dealing with idmappings instead of introducing a whole new range of helpers. In addition, if we decide in the future that we are confident enough to enable unprivileged users to setup idmapped mounts the permission checking can take into account whether the caller is privileged in the user namespace the mount is currently marked with. The user namespace the mount will be marked with can be specified by passing a file descriptor refering to the user namespace as an argument to the new mount_setattr() syscall together with the new MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern of extensibility. The following conditions must be met in order to create an idmapped mount: - The caller must currently have the CAP_SYS_ADMIN capability in the user namespace the underlying filesystem has been mounted in. - The underlying filesystem must support idmapped mounts. - The mount must not already be idmapped. This also implies that the idmapping of a mount cannot be altered once it has been idmapped. - The mount must be a detached/anonymous mount, i.e. it must have been created by calling open_tree() with the OPEN_TREE_CLONE flag and it must not already have been visible in the filesystem. The last two points guarantee easier semantics for userspace and the kernel and make the implementation significantly simpler. By default vfsmounts are marked with the initial user namespace and no behavioral or performance changes are observed. The manpage with a detailed description can be found here: https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8 In order to support idmapped mounts, filesystems need to be changed and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The patches to convert individual filesystem are not very large or complicated overall as can be seen from the included fat, ext4, and xfs ports. Patches for other filesystems are actively worked on and will be sent out separately. The xfstestsuite can be used to verify that port has been done correctly. The mount_setattr() syscall is motivated independent of the idmapped mounts patches and it's been around since July 2019. One of the most valuable features of the new mount api is the ability to perform mounts based on file descriptors only. Together with the lookup restrictions available in the openat2() RESOLVE_* flag namespace which we added in v5.6 this is the first time we are close to hardened and race-free (e.g. symlinks) mounting and path resolution. While userspace has started porting to the new mount api to mount proper filesystems and create new bind-mounts it is currently not possible to change mount options of an already existing bind mount in the new mount api since the mount_setattr() syscall is missing. With the addition of the mount_setattr() syscall we remove this last restriction and userspace can now fully port to the new mount api, covering every use-case the old mount api could. We also add the crucial ability to recursively change mount options for a whole mount tree, both removing and adding mount options at the same time. This syscall has been requested multiple times by various people and projects. There is a simple tool available at https://github.com/brauner/mount-idmapped that allows to create idmapped mounts so people can play with this patch series. I'll add support for the regular mount binary should you decide to pull this in the following weeks: Here's an example to a simple idmapped mount of another user's home directory: u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt u1001@f2-vm:/$ ls -al /home/ubuntu/ total 28 drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 . drwxr-xr-x 4 root root 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ ls -al /mnt/ total 28 drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 . drwxr-xr-x 29 root root 4096 Oct 28 22:01 .. -rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile -rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ touch /mnt/my-file u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file u1001@f2-vm:/$ ls -al /mnt/my-file -rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file u1001@f2-vm:/$ ls -al /home/ubuntu/my-file -rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file u1001@f2-vm:/$ getfacl /mnt/my-file getfacl: Removing leading '/' from absolute path names # file: mnt/my-file # owner: u1001 # group: u1001 user::rw- user:u1001:rwx group::rw- mask::rwx other::r-- u1001@f2-vm:/$ getfacl /home/ubuntu/my-file getfacl: Removing leading '/' from absolute path names # file: home/ubuntu/my-file # owner: ubuntu # group: ubuntu user::rw- user:ubuntu:rwx group::rw- mask::rwx other::r--" * tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits) xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl xfs: support idmapped mounts ext4: support idmapped mounts fat: handle idmapped mounts tests: add mount_setattr() selftests fs: introduce MOUNT_ATTR_IDMAP fs: add mount_setattr() fs: add attr_flags_to_mnt_flags helper fs: split out functions to hold writers namespace: only take read lock in do_reconfigure_mnt() mount: make {lock,unlock}_mount_hash() static namespace: take lock_mount_hash() directly when changing flags nfs: do not export idmapped mounts overlayfs: do not mount on top of idmapped mounts ecryptfs: do not mount on top of idmapped mounts ima: handle idmapped mounts apparmor: handle idmapped mounts fs: make helpers idmap mount aware exec: handle idmapped mounts would_dump: handle idmapped mounts ...
2021-02-24 05:39:45 +08:00
if (!in_group_p(kgid) && !capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
mode &= ~S_ISGID;
set_acl_inode(inode, mode);
}
}
#else
#define __setattr_copy setattr_copy
#endif
int f2fs_setattr(struct user_namespace *mnt_userns, struct dentry *dentry,
struct iattr *attr)
{
struct inode *inode = d_inode(dentry);
int err;
if (unlikely(f2fs_cp_error(F2FS_I_SB(inode))))
return -EIO;
if (unlikely(IS_IMMUTABLE(inode)))
return -EPERM;
if (unlikely(IS_APPEND(inode) &&
(attr->ia_valid & (ATTR_MODE | ATTR_UID |
ATTR_GID | ATTR_TIMES_SET))))
return -EPERM;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if ((attr->ia_valid & ATTR_SIZE) &&
!f2fs_is_compress_backend_ready(inode))
return -EOPNOTSUPP;
err = setattr_prepare(mnt_userns, dentry, attr);
if (err)
return err;
err = fscrypt_prepare_setattr(dentry, attr);
if (err)
return err;
f2fs: add fs-verity support Add fs-verity support to f2fs. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. The f2fs support for fs-verity consists of: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->readpages() to verify data as it's read from verity files and to support reading verity metadata pages. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). Like ext4, f2fs stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by f2fs with only some relatively small changes to f2fs. Extended attributes cannot be used because (a) f2fs limits the total size of an inode's xattr entries to 4096 bytes, which wouldn't be enough for even a single Merkle tree block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity metadata *must* be encrypted when the file is because it contains hashes of the plaintext data. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
err = fsverity_prepare_setattr(dentry, attr);
if (err)
return err;
if (is_quota_modification(inode, attr)) {
err = f2fs_dquot_initialize(inode);
if (err)
return err;
}
if ((attr->ia_valid & ATTR_UID &&
!uid_eq(attr->ia_uid, inode->i_uid)) ||
(attr->ia_valid & ATTR_GID &&
!gid_eq(attr->ia_gid, inode->i_gid))) {
f2fs_lock_op(F2FS_I_SB(inode));
err = dquot_transfer(inode, attr);
if (err) {
set_sbi_flag(F2FS_I_SB(inode),
SBI_QUOTA_NEED_REPAIR);
f2fs_unlock_op(F2FS_I_SB(inode));
return err;
}
/*
* update uid/gid under lock_op(), so that dquot and inode can
* be updated atomically.
*/
if (attr->ia_valid & ATTR_UID)
inode->i_uid = attr->ia_uid;
if (attr->ia_valid & ATTR_GID)
inode->i_gid = attr->ia_gid;
f2fs_mark_inode_dirty_sync(inode, true);
f2fs_unlock_op(F2FS_I_SB(inode));
}
if (attr->ia_valid & ATTR_SIZE) {
loff_t old_size = i_size_read(inode);
if (attr->ia_size > MAX_INLINE_DATA(inode)) {
/*
* should convert inline inode before i_size_write to
* keep smaller than inline_data size with inline flag.
*/
err = f2fs_convert_inline_inode(inode);
if (err)
return err;
}
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
filemap_invalidate_lock(inode->i_mapping);
truncate_setsize(inode, attr->ia_size);
if (attr->ia_size <= old_size)
err = f2fs_truncate(inode);
/*
* do not trim all blocks after i_size if target size is
* larger than i_size.
*/
filemap_invalidate_unlock(inode->i_mapping);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
if (err)
return err;
f2fs: cover last_disk_size update with spinlock This change solves below hangtask issue: INFO: task kworker/u16:1:58 blocked for more than 122 seconds. Not tainted 5.6.0-rc2-00590-g9983bdae4974e #11 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u16:1 D 0 58 2 0x00000000 Workqueue: writeback wb_workfn (flush-179:0) Backtrace: (__schedule) from [<c0913234>] (schedule+0x78/0xf4) (schedule) from [<c017ec74>] (rwsem_down_write_slowpath+0x24c/0x4c0) (rwsem_down_write_slowpath) from [<c0915f2c>] (down_write+0x6c/0x70) (down_write) from [<c0435b80>] (f2fs_write_single_data_page+0x608/0x7ac) (f2fs_write_single_data_page) from [<c0435fd8>] (f2fs_write_cache_pages+0x2b4/0x7c4) (f2fs_write_cache_pages) from [<c043682c>] (f2fs_write_data_pages+0x344/0x35c) (f2fs_write_data_pages) from [<c0267ee8>] (do_writepages+0x3c/0xd4) (do_writepages) from [<c0310cbc>] (__writeback_single_inode+0x44/0x454) (__writeback_single_inode) from [<c03112d0>] (writeback_sb_inodes+0x204/0x4b0) (writeback_sb_inodes) from [<c03115cc>] (__writeback_inodes_wb+0x50/0xe4) (__writeback_inodes_wb) from [<c03118f4>] (wb_writeback+0x294/0x338) (wb_writeback) from [<c0312dac>] (wb_workfn+0x35c/0x54c) (wb_workfn) from [<c014f2b8>] (process_one_work+0x214/0x544) (process_one_work) from [<c014f634>] (worker_thread+0x4c/0x574) (worker_thread) from [<c01564fc>] (kthread+0x144/0x170) (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Reported-and-tested-by: Ondřej Jirman <megi@xff.cz> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-02-27 19:30:03 +08:00
spin_lock(&F2FS_I(inode)->i_size_lock);
inode->i_mtime = inode->i_ctime = current_time(inode);
F2FS_I(inode)->last_disk_size = i_size_read(inode);
f2fs: cover last_disk_size update with spinlock This change solves below hangtask issue: INFO: task kworker/u16:1:58 blocked for more than 122 seconds. Not tainted 5.6.0-rc2-00590-g9983bdae4974e #11 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u16:1 D 0 58 2 0x00000000 Workqueue: writeback wb_workfn (flush-179:0) Backtrace: (__schedule) from [<c0913234>] (schedule+0x78/0xf4) (schedule) from [<c017ec74>] (rwsem_down_write_slowpath+0x24c/0x4c0) (rwsem_down_write_slowpath) from [<c0915f2c>] (down_write+0x6c/0x70) (down_write) from [<c0435b80>] (f2fs_write_single_data_page+0x608/0x7ac) (f2fs_write_single_data_page) from [<c0435fd8>] (f2fs_write_cache_pages+0x2b4/0x7c4) (f2fs_write_cache_pages) from [<c043682c>] (f2fs_write_data_pages+0x344/0x35c) (f2fs_write_data_pages) from [<c0267ee8>] (do_writepages+0x3c/0xd4) (do_writepages) from [<c0310cbc>] (__writeback_single_inode+0x44/0x454) (__writeback_single_inode) from [<c03112d0>] (writeback_sb_inodes+0x204/0x4b0) (writeback_sb_inodes) from [<c03115cc>] (__writeback_inodes_wb+0x50/0xe4) (__writeback_inodes_wb) from [<c03118f4>] (wb_writeback+0x294/0x338) (wb_writeback) from [<c0312dac>] (wb_workfn+0x35c/0x54c) (wb_workfn) from [<c014f2b8>] (process_one_work+0x214/0x544) (process_one_work) from [<c014f634>] (worker_thread+0x4c/0x574) (worker_thread) from [<c01564fc>] (kthread+0x144/0x170) (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Reported-and-tested-by: Ondřej Jirman <megi@xff.cz> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-02-27 19:30:03 +08:00
spin_unlock(&F2FS_I(inode)->i_size_lock);
}
__setattr_copy(mnt_userns, inode, attr);
if (attr->ia_valid & ATTR_MODE) {
err = posix_acl_chmod(mnt_userns, inode, f2fs_get_inode_mode(inode));
if (is_inode_flag_set(inode, FI_ACL_MODE)) {
if (!err)
inode->i_mode = F2FS_I(inode)->i_acl_mode;
clear_inode_flag(inode, FI_ACL_MODE);
}
}
/* file size may changed here */
f2fs_mark_inode_dirty_sync(inode, true);
/* inode change will produce dirty node pages flushed by checkpoint */
f2fs_balance_fs(F2FS_I_SB(inode), true);
return err;
}
const struct inode_operations f2fs_file_inode_operations = {
.getattr = f2fs_getattr,
.setattr = f2fs_setattr,
.get_acl = f2fs_get_acl,
.set_acl = f2fs_set_acl,
.listxattr = f2fs_listxattr,
.fiemap = f2fs_fiemap,
.fileattr_get = f2fs_fileattr_get,
.fileattr_set = f2fs_fileattr_set,
};
static int fill_zero(struct inode *inode, pgoff_t index,
loff_t start, loff_t len)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct page *page;
if (!len)
return 0;
f2fs_balance_fs(sbi, true);
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_lock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
page = f2fs_get_new_data_page(inode, NULL, index, false);
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_unlock_op(sbi);
if (IS_ERR(page))
return PTR_ERR(page);
f2fs_wait_on_page_writeback(page, DATA, true, true);
zero_user(page, start, len);
set_page_dirty(page);
f2fs_put_page(page, 1);
return 0;
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
int f2fs_truncate_hole(struct inode *inode, pgoff_t pg_start, pgoff_t pg_end)
{
int err;
while (pg_start < pg_end) {
struct dnode_of_data dn;
pgoff_t end_offset, count;
set_new_dnode(&dn, inode, NULL, NULL, 0);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
err = f2fs_get_dnode_of_data(&dn, pg_start, LOOKUP_NODE);
if (err) {
if (err == -ENOENT) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
pg_start = f2fs_get_next_page_offset(&dn,
pg_start);
continue;
}
return err;
}
end_offset = ADDRS_PER_PAGE(dn.node_page, inode);
count = min(end_offset - dn.ofs_in_node, pg_end - pg_start);
f2fs_bug_on(F2FS_I_SB(inode), count == 0 || count > end_offset);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_truncate_data_blocks_range(&dn, count);
f2fs_put_dnode(&dn);
pg_start += count;
}
return 0;
}
static int punch_hole(struct inode *inode, loff_t offset, loff_t len)
{
pgoff_t pg_start, pg_end;
loff_t off_start, off_end;
int ret;
ret = f2fs_convert_inline_inode(inode);
if (ret)
return ret;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pg_start = ((unsigned long long) offset) >> PAGE_SHIFT;
pg_end = ((unsigned long long) offset + len) >> PAGE_SHIFT;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
off_start = offset & (PAGE_SIZE - 1);
off_end = (offset + len) & (PAGE_SIZE - 1);
if (pg_start == pg_end) {
ret = fill_zero(inode, pg_start, off_start,
off_end - off_start);
if (ret)
return ret;
} else {
if (off_start) {
ret = fill_zero(inode, pg_start++, off_start,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
PAGE_SIZE - off_start);
if (ret)
return ret;
}
if (off_end) {
ret = fill_zero(inode, pg_end, 0, off_end);
if (ret)
return ret;
}
if (pg_start < pg_end) {
loff_t blk_start, blk_end;
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
f2fs_balance_fs(sbi, true);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
blk_start = (loff_t)pg_start << PAGE_SHIFT;
blk_end = (loff_t)pg_end << PAGE_SHIFT;
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
f2fs-for-5.15-rc1 In this cycle, we've addressed some performance issues such as lock contention, misbehaving compress_cache, allowing extent_cache for compressed files, and new sysfs to adjust ra_size for fadvise. In order to diagnose the performance issues quickly, we also added an iostat which shows the IO latencies periodically. On the stability side, we've found two memory leakage cases in the error path in compression flow. And, we've also fixed various corner cases in fiemap, quota, checkpoint=disable, zstd, and so on. Enhancement: - avoid long checkpoint latency by releasing nat_tree_lock - collect and show iostats periodically - support extent_cache for compressed files - add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL) - report f2fs GC status via sysfs - add discard_unit=%s in mount option to handle zoned device Bug fix: - fix two memory leakages when an error happens in the compressed IO flow - fix commpress_cache to get the right LBA - fix fiemap to deal with compressed case correctly - fix wrong EIO returns due to SBI_NEED_FSCK - fix missing writes when enabling checkpoint back - fix quota deadlock - fix zstd level mount option In addition to the above major updates, we've cleaned up several code paths such as dio, unnecessary operations, debugfs/f2fs/status, sanity check, and typos. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmEyw1sACgkQQBSofoJI UNLJmA/+NHUgwUjLMcHvmLyp6QYpQDZtKj93/sRDo+YHOYNdYFjWWUb329PYTKWS kEdzApCP+KHfVxeSkiL/x3qWP+RlTkIf96P0kR3/BKi0tjg25G2riFWztusDDFpt xi+AW5sUFDvIx1tFumvQHAQedSwBgcZ96ovT5EwxEuONkljhZC9phEC6vSXz9nOR e2EQIyezbC5O21np1KSeqSgqRMpVkJkVcEHy4VmpMBCLMOOYPepWwKw+yPaV/jR/ zUXdo2/53vma50M5LCDPCtjCtWQgLoeNeGLxyjfzQuTJU6TmtPY65JObLPt6pUSj fRW6qIziTZbVYXzOWBD0EYilv2N4c3BNJdhQCpx2Vyjw9/LLxzqKPOUyzBoa1kjY eZVvmaLXVCKsoJdHDSi7OH/4BqS6SuSZE8eO/nGkgswqiErHZ0Vwl3bFCWC7r/Bk r2U5spJx/83XO6c9H1bzeWEies1DRtwnCDIRRuw35RtJ4uHZaqCfkuJ7rOBwC90X 4SpaAKdUxP2RWc3GKELBIhaqPn7vyMy9ile6VU14PjM8UcY5hyE87T2azqR8gGut nVjRL4cbMGTPj6m1Qj8KqBRSaLuShe6AncUy7bNGiM+JlcLcdB6OJ1ZYLl9hjx2r TbIouXThgcZ4SIK0DEaBLKz2b9/0TfaO9gw1XzpRma+bWA1pApM= =W67o -----END PGP SIGNATURE----- Merge tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this cycle, we've addressed some performance issues such as lock contention, misbehaving compress_cache, allowing extent_cache for compressed files, and new sysfs to adjust ra_size for fadvise. In order to diagnose the performance issues quickly, we also added an iostat which shows the IO latencies periodically. On the stability side, we've found two memory leakage cases in the error path in compression flow. And, we've also fixed various corner cases in fiemap, quota, checkpoint=disable, zstd, and so on. Enhancements: - avoid long checkpoint latency by releasing nat_tree_lock - collect and show iostats periodically - support extent_cache for compressed files - add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL) - report f2fs GC status via sysfs - add discard_unit=%s in mount option to handle zoned device Bug fixes: - fix two memory leakages when an error happens in the compressed IO flow - fix commpress_cache to get the right LBA - fix fiemap to deal with compressed case correctly - fix wrong EIO returns due to SBI_NEED_FSCK - fix missing writes when enabling checkpoint back - fix quota deadlock - fix zstd level mount option In addition to the above major updates, we've cleaned up several code paths such as dio, unnecessary operations, debugfs/f2fs/status, sanity check, and typos" * tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits) f2fs: should put a page beyond EOF when preparing a write f2fs: deallocate compressed pages when error happens f2fs: enable realtime discard iff device supports discard f2fs: guarantee to write dirty data when enabling checkpoint back f2fs: fix to unmap pages from userspace process in punch_hole() f2fs: fix unexpected ENOENT comes from f2fs_map_blocks() f2fs: fix to account missing .skipped_gc_rwsem f2fs: adjust unlock order for cleanup f2fs: Don't create discard thread when device doesn't support realtime discard f2fs: rebuild nat_bits during umount f2fs: introduce periodic iostat io latency traces f2fs: separate out iostat feature f2fs: compress: do sanity check on cluster f2fs: fix description about main_blkaddr node f2fs: convert S_IRUGO to 0444 f2fs: fix to keep compatibility of fault injection interface f2fs: support fault injection for f2fs_kmem_cache_alloc() f2fs: compress: allow write compress released file after truncate to zero f2fs: correct comment in segment.h f2fs: improve sbi status info in debugfs/f2fs/status ...
2021-09-05 01:48:47 +08:00
filemap_invalidate_lock(inode->i_mapping);
truncate_pagecache_range(inode, blk_start, blk_end - 1);
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 15:21:29 +08:00
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_lock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
ret = f2fs_truncate_hole(inode, pg_start, pg_end);
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_unlock_op(sbi);
f2fs-for-5.15-rc1 In this cycle, we've addressed some performance issues such as lock contention, misbehaving compress_cache, allowing extent_cache for compressed files, and new sysfs to adjust ra_size for fadvise. In order to diagnose the performance issues quickly, we also added an iostat which shows the IO latencies periodically. On the stability side, we've found two memory leakage cases in the error path in compression flow. And, we've also fixed various corner cases in fiemap, quota, checkpoint=disable, zstd, and so on. Enhancement: - avoid long checkpoint latency by releasing nat_tree_lock - collect and show iostats periodically - support extent_cache for compressed files - add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL) - report f2fs GC status via sysfs - add discard_unit=%s in mount option to handle zoned device Bug fix: - fix two memory leakages when an error happens in the compressed IO flow - fix commpress_cache to get the right LBA - fix fiemap to deal with compressed case correctly - fix wrong EIO returns due to SBI_NEED_FSCK - fix missing writes when enabling checkpoint back - fix quota deadlock - fix zstd level mount option In addition to the above major updates, we've cleaned up several code paths such as dio, unnecessary operations, debugfs/f2fs/status, sanity check, and typos. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmEyw1sACgkQQBSofoJI UNLJmA/+NHUgwUjLMcHvmLyp6QYpQDZtKj93/sRDo+YHOYNdYFjWWUb329PYTKWS kEdzApCP+KHfVxeSkiL/x3qWP+RlTkIf96P0kR3/BKi0tjg25G2riFWztusDDFpt xi+AW5sUFDvIx1tFumvQHAQedSwBgcZ96ovT5EwxEuONkljhZC9phEC6vSXz9nOR e2EQIyezbC5O21np1KSeqSgqRMpVkJkVcEHy4VmpMBCLMOOYPepWwKw+yPaV/jR/ zUXdo2/53vma50M5LCDPCtjCtWQgLoeNeGLxyjfzQuTJU6TmtPY65JObLPt6pUSj fRW6qIziTZbVYXzOWBD0EYilv2N4c3BNJdhQCpx2Vyjw9/LLxzqKPOUyzBoa1kjY eZVvmaLXVCKsoJdHDSi7OH/4BqS6SuSZE8eO/nGkgswqiErHZ0Vwl3bFCWC7r/Bk r2U5spJx/83XO6c9H1bzeWEies1DRtwnCDIRRuw35RtJ4uHZaqCfkuJ7rOBwC90X 4SpaAKdUxP2RWc3GKELBIhaqPn7vyMy9ile6VU14PjM8UcY5hyE87T2azqR8gGut nVjRL4cbMGTPj6m1Qj8KqBRSaLuShe6AncUy7bNGiM+JlcLcdB6OJ1ZYLl9hjx2r TbIouXThgcZ4SIK0DEaBLKz2b9/0TfaO9gw1XzpRma+bWA1pApM= =W67o -----END PGP SIGNATURE----- Merge tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this cycle, we've addressed some performance issues such as lock contention, misbehaving compress_cache, allowing extent_cache for compressed files, and new sysfs to adjust ra_size for fadvise. In order to diagnose the performance issues quickly, we also added an iostat which shows the IO latencies periodically. On the stability side, we've found two memory leakage cases in the error path in compression flow. And, we've also fixed various corner cases in fiemap, quota, checkpoint=disable, zstd, and so on. Enhancements: - avoid long checkpoint latency by releasing nat_tree_lock - collect and show iostats periodically - support extent_cache for compressed files - add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL) - report f2fs GC status via sysfs - add discard_unit=%s in mount option to handle zoned device Bug fixes: - fix two memory leakages when an error happens in the compressed IO flow - fix commpress_cache to get the right LBA - fix fiemap to deal with compressed case correctly - fix wrong EIO returns due to SBI_NEED_FSCK - fix missing writes when enabling checkpoint back - fix quota deadlock - fix zstd level mount option In addition to the above major updates, we've cleaned up several code paths such as dio, unnecessary operations, debugfs/f2fs/status, sanity check, and typos" * tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits) f2fs: should put a page beyond EOF when preparing a write f2fs: deallocate compressed pages when error happens f2fs: enable realtime discard iff device supports discard f2fs: guarantee to write dirty data when enabling checkpoint back f2fs: fix to unmap pages from userspace process in punch_hole() f2fs: fix unexpected ENOENT comes from f2fs_map_blocks() f2fs: fix to account missing .skipped_gc_rwsem f2fs: adjust unlock order for cleanup f2fs: Don't create discard thread when device doesn't support realtime discard f2fs: rebuild nat_bits during umount f2fs: introduce periodic iostat io latency traces f2fs: separate out iostat feature f2fs: compress: do sanity check on cluster f2fs: fix description about main_blkaddr node f2fs: convert S_IRUGO to 0444 f2fs: fix to keep compatibility of fault injection interface f2fs: support fault injection for f2fs_kmem_cache_alloc() f2fs: compress: allow write compress released file after truncate to zero f2fs: correct comment in segment.h f2fs: improve sbi status info in debugfs/f2fs/status ...
2021-09-05 01:48:47 +08:00
filemap_invalidate_unlock(inode->i_mapping);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
}
}
return ret;
}
static int __read_out_blkaddrs(struct inode *inode, block_t *blkaddr,
int *do_replace, pgoff_t off, pgoff_t len)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct dnode_of_data dn;
int ret, done, i;
next_dnode:
set_new_dnode(&dn, inode, NULL, NULL, 0);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
ret = f2fs_get_dnode_of_data(&dn, off, LOOKUP_NODE_RA);
if (ret && ret != -ENOENT) {
return ret;
} else if (ret == -ENOENT) {
if (dn.max_level == 0)
return -ENOENT;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
done = min((pgoff_t)ADDRS_PER_BLOCK(inode) -
dn.ofs_in_node, len);
blkaddr += done;
do_replace += done;
goto next;
}
done = min((pgoff_t)ADDRS_PER_PAGE(dn.node_page, inode) -
dn.ofs_in_node, len);
for (i = 0; i < done; i++, blkaddr++, do_replace++, dn.ofs_in_node++) {
*blkaddr = f2fs_data_blkaddr(&dn);
f2fs: introduce DATA_GENERIC_ENHANCE Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check whether @blkaddr locates in main area or not. That check is weak, since the block address in range of main area can point to the address which is not valid in segment info table, and we can not detect such condition, we may suffer worse corruption as system continues running. So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check which trigger SIT bitmap check rather than only range check. This patch did below changes as wel: - set SBI_NEED_FSCK in f2fs_is_valid_blkaddr(). - get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid. - introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check. - spread blkaddr check in: * f2fs_get_node_info() * __read_out_blkaddrs() * f2fs_submit_page_read() * ra_data_block() * do_recover_data() This patch can fix bug reported from bugzilla below: https://bugzilla.kernel.org/show_bug.cgi?id=203215 https://bugzilla.kernel.org/show_bug.cgi?id=203223 https://bugzilla.kernel.org/show_bug.cgi?id=203231 https://bugzilla.kernel.org/show_bug.cgi?id=203235 https://bugzilla.kernel.org/show_bug.cgi?id=203241 = Update by Jaegeuk Kim = DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths. But, xfstest/generic/446 compalins some generated kernel messages saying invalid bitmap was detected when reading a block. The reaons is, when we get the block addresses from extent_cache, there is no lock to synchronize it from truncating the blocks in parallel. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
if (__is_valid_data_blkaddr(*blkaddr) &&
!f2fs_is_valid_blkaddr(sbi, *blkaddr,
DATA_GENERIC_ENHANCE)) {
f2fs_put_dnode(&dn);
return -EFSCORRUPTED;
f2fs: introduce DATA_GENERIC_ENHANCE Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check whether @blkaddr locates in main area or not. That check is weak, since the block address in range of main area can point to the address which is not valid in segment info table, and we can not detect such condition, we may suffer worse corruption as system continues running. So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check which trigger SIT bitmap check rather than only range check. This patch did below changes as wel: - set SBI_NEED_FSCK in f2fs_is_valid_blkaddr(). - get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid. - introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check. - spread blkaddr check in: * f2fs_get_node_info() * __read_out_blkaddrs() * f2fs_submit_page_read() * ra_data_block() * do_recover_data() This patch can fix bug reported from bugzilla below: https://bugzilla.kernel.org/show_bug.cgi?id=203215 https://bugzilla.kernel.org/show_bug.cgi?id=203223 https://bugzilla.kernel.org/show_bug.cgi?id=203231 https://bugzilla.kernel.org/show_bug.cgi?id=203235 https://bugzilla.kernel.org/show_bug.cgi?id=203241 = Update by Jaegeuk Kim = DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths. But, xfstest/generic/446 compalins some generated kernel messages saying invalid bitmap was detected when reading a block. The reaons is, when we get the block addresses from extent_cache, there is no lock to synchronize it from truncating the blocks in parallel. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
if (!f2fs_is_checkpointed_data(sbi, *blkaddr)) {
if (f2fs_lfs_mode(sbi)) {
f2fs_put_dnode(&dn);
return -EOPNOTSUPP;
}
/* do not invalidate this block address */
f2fs_update_data_blkaddr(&dn, NULL_ADDR);
*do_replace = 1;
}
}
f2fs_put_dnode(&dn);
next:
len -= done;
off += done;
if (len)
goto next_dnode;
return 0;
}
static int __roll_back_blkaddrs(struct inode *inode, block_t *blkaddr,
int *do_replace, pgoff_t off, int len)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct dnode_of_data dn;
int ret, i;
for (i = 0; i < len; i++, do_replace++, blkaddr++) {
if (*do_replace == 0)
continue;
set_new_dnode(&dn, inode, NULL, NULL, 0);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
ret = f2fs_get_dnode_of_data(&dn, off + i, LOOKUP_NODE_RA);
if (ret) {
dec_valid_block_count(sbi, inode, 1);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_invalidate_blocks(sbi, *blkaddr);
} else {
f2fs_update_data_blkaddr(&dn, *blkaddr);
}
f2fs_put_dnode(&dn);
}
return 0;
}
static int __clone_blkaddrs(struct inode *src_inode, struct inode *dst_inode,
block_t *blkaddr, int *do_replace,
pgoff_t src, pgoff_t dst, pgoff_t len, bool full)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(src_inode);
pgoff_t i = 0;
int ret;
while (i < len) {
if (blkaddr[i] == NULL_ADDR && !full) {
i++;
continue;
}
if (do_replace[i] || blkaddr[i] == NULL_ADDR) {
struct dnode_of_data dn;
struct node_info ni;
size_t new_size;
pgoff_t ilen;
set_new_dnode(&dn, dst_inode, NULL, NULL, 0);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
ret = f2fs_get_dnode_of_data(&dn, dst + i, ALLOC_NODE);
if (ret)
return ret;
ret = f2fs_get_node_info(sbi, dn.nid, &ni, false);
if (ret) {
f2fs_put_dnode(&dn);
return ret;
}
ilen = min((pgoff_t)
ADDRS_PER_PAGE(dn.node_page, dst_inode) -
dn.ofs_in_node, len - i);
do {
dn.data_blkaddr = f2fs_data_blkaddr(&dn);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_truncate_data_blocks_range(&dn, 1);
if (do_replace[i]) {
f2fs_i_blocks_write(src_inode,
1, false, false);
f2fs_i_blocks_write(dst_inode,
1, true, false);
f2fs_replace_block(sbi, &dn, dn.data_blkaddr,
blkaddr[i], ni.version, true, false);
do_replace[i] = 0;
}
dn.ofs_in_node++;
i++;
new_size = (loff_t)(dst + i) << PAGE_SHIFT;
if (dst_inode->i_size < new_size)
f2fs_i_size_write(dst_inode, new_size);
} while (--ilen && (do_replace[i] || blkaddr[i] == NULL_ADDR));
f2fs_put_dnode(&dn);
} else {
struct page *psrc, *pdst;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
psrc = f2fs_get_lock_data_page(src_inode,
src + i, true);
if (IS_ERR(psrc))
return PTR_ERR(psrc);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
pdst = f2fs_get_new_data_page(dst_inode, NULL, dst + i,
true);
if (IS_ERR(pdst)) {
f2fs_put_page(psrc, 1);
return PTR_ERR(pdst);
}
f2fs_copy_page(psrc, pdst);
set_page_dirty(pdst);
f2fs_put_page(pdst, 1);
f2fs_put_page(psrc, 1);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
ret = f2fs_truncate_hole(src_inode,
src + i, src + i + 1);
if (ret)
return ret;
i++;
}
}
return 0;
}
static int __exchange_data_block(struct inode *src_inode,
struct inode *dst_inode, pgoff_t src, pgoff_t dst,
pgoff_t len, bool full)
{
block_t *src_blkaddr;
int *do_replace;
pgoff_t olen;
int ret;
while (len) {
olen = min((pgoff_t)4 * ADDRS_PER_BLOCK(src_inode), len);
src_blkaddr = f2fs_kvzalloc(F2FS_I_SB(src_inode),
treewide: Use array_size in f2fs_kvzalloc() The f2fs_kvzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: f2fs_kvzalloc(handle, a * b, gfp) with: f2fs_kvzalloc(handle, array_size(a, b), gfp) as well as handling cases of: f2fs_kvzalloc(handle, a * b * c, gfp) with: f2fs_kvzalloc(handle, array3_size(a, b, c), gfp) This does, however, attempt to ignore constant size factors like: f2fs_kvzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( f2fs_kvzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | f2fs_kvzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( f2fs_kvzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ f2fs_kvzalloc(HANDLE, - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( f2fs_kvzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( f2fs_kvzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( f2fs_kvzalloc(HANDLE, C1 * C2 * C3, ...) | f2fs_kvzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression HANDLE; expression E1, E2; constant C1, C2; @@ ( f2fs_kvzalloc(HANDLE, C1 * C2, ...) | f2fs_kvzalloc(HANDLE, - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:28:35 +08:00
array_size(olen, sizeof(block_t)),
GFP_NOFS);
if (!src_blkaddr)
return -ENOMEM;
do_replace = f2fs_kvzalloc(F2FS_I_SB(src_inode),
treewide: Use array_size in f2fs_kvzalloc() The f2fs_kvzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: f2fs_kvzalloc(handle, a * b, gfp) with: f2fs_kvzalloc(handle, array_size(a, b), gfp) as well as handling cases of: f2fs_kvzalloc(handle, a * b * c, gfp) with: f2fs_kvzalloc(handle, array3_size(a, b, c), gfp) This does, however, attempt to ignore constant size factors like: f2fs_kvzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( f2fs_kvzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | f2fs_kvzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( f2fs_kvzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | f2fs_kvzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ f2fs_kvzalloc(HANDLE, - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( f2fs_kvzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | f2fs_kvzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( f2fs_kvzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kvzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( f2fs_kvzalloc(HANDLE, C1 * C2 * C3, ...) | f2fs_kvzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression HANDLE; expression E1, E2; constant C1, C2; @@ ( f2fs_kvzalloc(HANDLE, C1 * C2, ...) | f2fs_kvzalloc(HANDLE, - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:28:35 +08:00
array_size(olen, sizeof(int)),
GFP_NOFS);
if (!do_replace) {
kvfree(src_blkaddr);
return -ENOMEM;
}
ret = __read_out_blkaddrs(src_inode, src_blkaddr,
do_replace, src, olen);
if (ret)
goto roll_back;
ret = __clone_blkaddrs(src_inode, dst_inode, src_blkaddr,
do_replace, src, dst, olen, full);
if (ret)
goto roll_back;
src += olen;
dst += olen;
len -= olen;
kvfree(src_blkaddr);
kvfree(do_replace);
}
return 0;
roll_back:
f2fs: fix to avoid accessing cross the boundary Configure io_bits with 2 and enable LFS mode, generic/017 reports below dmesg: BUG: unable to handle kernel NULL pointer dereference at 00000039 *pdpt = 000000002fcb2001 *pde = 0000000000000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: crc32_generic zram f2fs(O) bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi pcbc snd_seq joydev aesni_intel aes_i586 snd_seq_device snd_timer crypto_simd cryptd snd soundcore i2c_piix4 serio_raw mac_hid video parport_pc ppdev lp parport hid_generic usbhid psmouse hid e1000 CPU: 2 PID: 20779 Comm: xfs_io Tainted: G O 4.17.0-rc2 #38 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: is_checkpointed_data+0x84/0xd0 [f2fs] EFLAGS: 00010207 CPU: 2 EAX: 00000000 EBX: f5cd7000 ECX: fffffe32 EDX: 00000039 ESI: 000001cd EDI: ec95fb6c EBP: e264bd80 ESP: e264bd6c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 80050033 CR2: 00000039 CR3: 2fe55660 CR4: 000406f0 Call Trace: __exchange_data_block+0xb3f/0x1000 [f2fs] f2fs_fallocate+0xab9/0x16b0 [f2fs] vfs_fallocate+0x17c/0x2d0 ksys_fallocate+0x42/0x70 sys_fallocate+0x31/0x40 do_fast_syscall_32+0xaa/0x22c entry_SYSENTER_32+0x4c/0x7b EIP: 0xb7f98c51 EFLAGS: 00000293 CPU: 2 EAX: ffffffda EBX: 00000003 ECX: 00000008 EDX: 01001000 ESI: 00000000 EDI: 00001000 EBP: 00000000 ESP: bfc0357c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b Code: 00 00 d3 e8 8b 4d ec 2b 02 8b 55 f0 6b c0 1c 03 41 70 29 d6 8b 93 d0 06 00 00 8b 40 0c 83 ea 01 21 d6 89 f2 89 f1 c1 ea 03 f7 d1 <0f> be 14 10 83 e1 07 b8 01 00 00 00 d3 e0 85 c2 89 f8 0f 95 c3 EIP: is_checkpointed_data+0x84/0xd0 [f2fs] SS:ESP: 0068:e264bd6c CR2: 0000000000000039 ---[ end trace 9a4d4087cce6080a ]--- This is because in recovery flow of __exchange_data_block, we didn't pass olen to __roll_back_blkaddrs, instead we passed len, which indicates wrong array size, result in copying random block address into dnode page. Later, once that random block address was accessed by is_checkpointed_data, it can cause NULL pointer dereference. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-28 23:47:19 +08:00
__roll_back_blkaddrs(src_inode, src_blkaddr, do_replace, src, olen);
kvfree(src_blkaddr);
kvfree(do_replace);
return ret;
}
static int f2fs_do_collapse(struct inode *inode, loff_t offset, loff_t len)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
pgoff_t nrpages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
pgoff_t start = offset >> PAGE_SHIFT;
pgoff_t end = (offset + len) >> PAGE_SHIFT;
int ret;
f2fs_balance_fs(sbi, true);
/* avoid gc operation during block exchange */
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
filemap_invalidate_lock(inode->i_mapping);
f2fs_lock_op(sbi);
f2fs_drop_extent_tree(inode);
truncate_pagecache(inode, offset);
ret = __exchange_data_block(inode, inode, end, start, nrpages - end, true);
f2fs_unlock_op(sbi);
filemap_invalidate_unlock(inode->i_mapping);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
return ret;
}
static int f2fs_collapse_range(struct inode *inode, loff_t offset, loff_t len)
{
loff_t new_size;
int ret;
if (offset + len >= i_size_read(inode))
return -EINVAL;
/* collapse range should be aligned to block size of f2fs. */
if (offset & (F2FS_BLKSIZE - 1) || len & (F2FS_BLKSIZE - 1))
return -EINVAL;
ret = f2fs_convert_inline_inode(inode);
if (ret)
return ret;
/* write out all dirty pages from offset */
ret = filemap_write_and_wait_range(inode->i_mapping, offset, LLONG_MAX);
if (ret)
return ret;
ret = f2fs_do_collapse(inode, offset, len);
if (ret)
return ret;
/* write out all moved pages, if possible */
filemap_invalidate_lock(inode->i_mapping);
filemap_write_and_wait_range(inode->i_mapping, offset, LLONG_MAX);
truncate_pagecache(inode, offset);
new_size = i_size_read(inode) - len;
ret = f2fs_truncate_blocks(inode, new_size, true);
filemap_invalidate_unlock(inode->i_mapping);
if (!ret)
f2fs_i_size_write(inode, new_size);
return ret;
}
static int f2fs_do_zero_range(struct dnode_of_data *dn, pgoff_t start,
pgoff_t end)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
pgoff_t index = start;
unsigned int ofs_in_node = dn->ofs_in_node;
blkcnt_t count = 0;
int ret;
for (; index < end; index++, dn->ofs_in_node++) {
if (f2fs_data_blkaddr(dn) == NULL_ADDR)
count++;
}
dn->ofs_in_node = ofs_in_node;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
ret = f2fs_reserve_new_blocks(dn, count);
if (ret)
return ret;
dn->ofs_in_node = ofs_in_node;
for (index = start; index < end; index++, dn->ofs_in_node++) {
dn->data_blkaddr = f2fs_data_blkaddr(dn);
/*
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
* f2fs_reserve_new_blocks will not guarantee entire block
* allocation.
*/
if (dn->data_blkaddr == NULL_ADDR) {
ret = -ENOSPC;
break;
}
if (dn->data_blkaddr != NEW_ADDR) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_invalidate_blocks(sbi, dn->data_blkaddr);
dn->data_blkaddr = NEW_ADDR;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_set_data_blkaddr(dn);
}
}
f2fs_update_extent_cache_range(dn, start, 0, index - start);
return ret;
}
static int f2fs_zero_range(struct inode *inode, loff_t offset, loff_t len,
int mode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct address_space *mapping = inode->i_mapping;
pgoff_t index, pg_start, pg_end;
loff_t new_size = i_size_read(inode);
loff_t off_start, off_end;
int ret = 0;
ret = inode_newsize_ok(inode, (len + offset));
if (ret)
return ret;
ret = f2fs_convert_inline_inode(inode);
if (ret)
return ret;
ret = filemap_write_and_wait_range(mapping, offset, offset + len - 1);
if (ret)
return ret;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pg_start = ((unsigned long long) offset) >> PAGE_SHIFT;
pg_end = ((unsigned long long) offset + len) >> PAGE_SHIFT;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
off_start = offset & (PAGE_SIZE - 1);
off_end = (offset + len) & (PAGE_SIZE - 1);
if (pg_start == pg_end) {
ret = fill_zero(inode, pg_start, off_start,
off_end - off_start);
if (ret)
return ret;
new_size = max_t(loff_t, new_size, offset + len);
} else {
if (off_start) {
ret = fill_zero(inode, pg_start++, off_start,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
PAGE_SIZE - off_start);
if (ret)
return ret;
new_size = max_t(loff_t, new_size,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
(loff_t)pg_start << PAGE_SHIFT);
}
for (index = pg_start; index < pg_end;) {
struct dnode_of_data dn;
unsigned int end_offset;
pgoff_t end;
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
filemap_invalidate_lock(mapping);
truncate_pagecache_range(inode,
(loff_t)index << PAGE_SHIFT,
((loff_t)pg_end << PAGE_SHIFT) - 1);
f2fs_lock_op(sbi);
set_new_dnode(&dn, inode, NULL, NULL, 0);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
ret = f2fs_get_dnode_of_data(&dn, index, ALLOC_NODE);
if (ret) {
f2fs_unlock_op(sbi);
filemap_invalidate_unlock(mapping);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
goto out;
}
end_offset = ADDRS_PER_PAGE(dn.node_page, inode);
end = min(pg_end, end_offset - dn.ofs_in_node + index);
ret = f2fs_do_zero_range(&dn, index, end);
f2fs_put_dnode(&dn);
f2fs_unlock_op(sbi);
filemap_invalidate_unlock(mapping);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
f2fs_balance_fs(sbi, dn.node_changed);
if (ret)
goto out;
index = end;
new_size = max_t(loff_t, new_size,
(loff_t)index << PAGE_SHIFT);
}
if (off_end) {
ret = fill_zero(inode, pg_end, 0, off_end);
if (ret)
goto out;
new_size = max_t(loff_t, new_size, offset + len);
}
}
out:
if (new_size > i_size_read(inode)) {
if (mode & FALLOC_FL_KEEP_SIZE)
file_set_keep_isize(inode);
else
f2fs_i_size_write(inode, new_size);
}
return ret;
}
static int f2fs_insert_range(struct inode *inode, loff_t offset, loff_t len)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct address_space *mapping = inode->i_mapping;
pgoff_t nr, pg_start, pg_end, delta, idx;
loff_t new_size;
int ret = 0;
new_size = i_size_read(inode) + len;
ret = inode_newsize_ok(inode, new_size);
if (ret)
return ret;
if (offset >= i_size_read(inode))
return -EINVAL;
/* insert range should be aligned to block size of f2fs. */
if (offset & (F2FS_BLKSIZE - 1) || len & (F2FS_BLKSIZE - 1))
return -EINVAL;
ret = f2fs_convert_inline_inode(inode);
if (ret)
return ret;
f2fs_balance_fs(sbi, true);
filemap_invalidate_lock(mapping);
ret = f2fs_truncate_blocks(inode, i_size_read(inode), true);
filemap_invalidate_unlock(mapping);
if (ret)
return ret;
/* write out all dirty pages from offset */
ret = filemap_write_and_wait_range(mapping, offset, LLONG_MAX);
if (ret)
return ret;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pg_start = offset >> PAGE_SHIFT;
pg_end = (offset + len) >> PAGE_SHIFT;
delta = pg_end - pg_start;
idx = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
/* avoid gc operation during block exchange */
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
filemap_invalidate_lock(mapping);
truncate_pagecache(inode, offset);
while (!ret && idx > pg_start) {
nr = idx - pg_start;
if (nr > delta)
nr = delta;
idx -= nr;
f2fs_lock_op(sbi);
f2fs_drop_extent_tree(inode);
ret = __exchange_data_block(inode, inode, idx,
idx + delta, nr, false);
f2fs_unlock_op(sbi);
}
filemap_invalidate_unlock(mapping);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
/* write out all moved pages, if possible */
filemap_invalidate_lock(mapping);
filemap_write_and_wait_range(mapping, offset, LLONG_MAX);
truncate_pagecache(inode, offset);
filemap_invalidate_unlock(mapping);
if (!ret)
f2fs_i_size_write(inode, new_size);
return ret;
}
static int expand_inode_data(struct inode *inode, loff_t offset,
loff_t len, int mode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct f2fs_map_blocks map = { .m_next_pgofs = NULL,
f2fs: fix out-place-update DIO write In get_more_blocks(), we may override @create as below code: create = dio->op == REQ_OP_WRITE; if (dio->flags & DIO_SKIP_HOLES) { if (fs_startblk <= ((i_size_read(dio->inode) - 1) >> i_blkbits)) create = 0; } But in f2fs_map_blocks(), we only trigger f2fs_balance_fs() if @create is 1, so in LFS mode, dio overwrite under LFS mode can easily run out of free segments, result in below panic. Call Trace: allocate_segment_by_default+0xa8/0x270 [f2fs] f2fs_allocate_data_block+0x1ea/0x5c0 [f2fs] __allocate_data_block+0x306/0x480 [f2fs] f2fs_map_blocks+0x6f6/0x920 [f2fs] __get_data_block+0x4f/0xb0 [f2fs] get_data_block_dio_write+0x50/0x60 [f2fs] do_blockdev_direct_IO+0xcd5/0x21e0 __blockdev_direct_IO+0x3a/0x3c f2fs_direct_IO+0x1ff/0x4a0 [f2fs] generic_file_direct_write+0xd9/0x160 __generic_file_write_iter+0xbb/0x1e0 f2fs_file_write_iter+0xaf/0x220 [f2fs] __vfs_write+0xd0/0x130 vfs_write+0xb2/0x1b0 SyS_pwrite64+0x69/0xa0 ? vtime_user_exit+0x29/0x70 do_syscall_64+0x6e/0x160 entry_SYSCALL64_slow_path+0x25/0x25 RIP: new_curseg+0x36f/0x380 [f2fs] RSP: ffffac570393f7a8 So this patch introduces a parameter map.m_may_create to indicate that f2fs_map_blocks() is called from write or read path, which can give the right hint to let f2fs_map_blocks() trigger OPU allocation and call f2fs_balanc_fs() correctly. BTW, it disables physical address preallocation for direct IO in f2fs_preallocate_blocks, which is redundant to OPU allocation of f2fs_map_blocks. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-13 14:33:45 +08:00
.m_next_extent = NULL, .m_seg_type = NO_CHECK_TYPE,
.m_may_create = true };
pgoff_t pg_start, pg_end;
loff_t new_size = i_size_read(inode);
loff_t off_end;
block_t expanded = 0;
int err;
err = inode_newsize_ok(inode, (len + offset));
if (err)
return err;
err = f2fs_convert_inline_inode(inode);
if (err)
return err;
f2fs_balance_fs(sbi, true);
pg_start = ((unsigned long long)offset) >> PAGE_SHIFT;
pg_end = ((unsigned long long)offset + len) >> PAGE_SHIFT;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
off_end = (offset + len) & (PAGE_SIZE - 1);
map.m_lblk = pg_start;
map.m_len = pg_end - pg_start;
if (off_end)
map.m_len++;
if (!map.m_len)
return 0;
if (f2fs_is_pinned_file(inode)) {
block_t sec_blks = BLKS_PER_SEC(sbi);
block_t sec_len = roundup(map.m_len, sec_blks);
map.m_len = sec_blks;
next_alloc:
if (has_not_enough_free_secs(sbi, 0,
GET_SEC_FROM_SEG(sbi, overprovision_segments(sbi)))) {
f2fs_down_write(&sbi->gc_lock);
err = f2fs_gc(sbi, true, false, false, NULL_SEGNO);
if (err && err != -ENODATA && err != -EAGAIN)
goto out_err;
}
f2fs_down_write(&sbi->pin_sem);
f2fs_lock_op(sbi);
f2fs_allocate_new_section(sbi, CURSEG_COLD_DATA_PINNED, false);
f2fs_unlock_op(sbi);
map.m_seg_type = CURSEG_COLD_DATA_PINNED;
err = f2fs_map_blocks(inode, &map, 1, F2FS_GET_BLOCK_PRE_DIO);
file_dont_truncate(inode);
f2fs_up_write(&sbi->pin_sem);
expanded += map.m_len;
sec_len -= map.m_len;
map.m_lblk += map.m_len;
if (!err && sec_len)
goto next_alloc;
map.m_len = expanded;
} else {
err = f2fs_map_blocks(inode, &map, 1, F2FS_GET_BLOCK_PRE_AIO);
expanded = map.m_len;
}
out_err:
if (err) {
pgoff_t last_off;
if (!expanded)
return err;
last_off = pg_start + expanded - 1;
/* update new size to the failed position */
new_size = (last_off == pg_end) ? offset + len :
(loff_t)(last_off + 1) << PAGE_SHIFT;
} else {
new_size = ((loff_t)pg_end << PAGE_SHIFT) + off_end;
}
if (new_size > i_size_read(inode)) {
if (mode & FALLOC_FL_KEEP_SIZE)
file_set_keep_isize(inode);
else
f2fs_i_size_write(inode, new_size);
}
return err;
}
static long f2fs_fallocate(struct file *file, int mode,
loff_t offset, loff_t len)
{
struct inode *inode = file_inode(file);
long ret = 0;
if (unlikely(f2fs_cp_error(F2FS_I_SB(inode))))
return -EIO;
if (!f2fs_is_checkpoint_ready(F2FS_I_SB(inode)))
return -ENOSPC;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (!f2fs_is_compress_backend_ready(inode))
return -EOPNOTSUPP;
/* f2fs only support ->fallocate for regular file */
if (!S_ISREG(inode->i_mode))
return -EINVAL;
if (IS_ENCRYPTED(inode) &&
(mode & (FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_INSERT_RANGE)))
return -EOPNOTSUPP;
/*
* Pinned file should not support partial trucation since the block
* can be used by applications.
*/
if ((f2fs_compressed_file(inode) || f2fs_is_pinned_file(inode)) &&
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
(mode & (FALLOC_FL_PUNCH_HOLE | FALLOC_FL_COLLAPSE_RANGE |
FALLOC_FL_ZERO_RANGE | FALLOC_FL_INSERT_RANGE)))
return -EOPNOTSUPP;
if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |
FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_ZERO_RANGE |
FALLOC_FL_INSERT_RANGE))
return -EOPNOTSUPP;
inode_lock(inode);
if (mode & FALLOC_FL_PUNCH_HOLE) {
if (offset >= inode->i_size)
goto out;
ret = punch_hole(inode, offset, len);
} else if (mode & FALLOC_FL_COLLAPSE_RANGE) {
ret = f2fs_collapse_range(inode, offset, len);
} else if (mode & FALLOC_FL_ZERO_RANGE) {
ret = f2fs_zero_range(inode, offset, len, mode);
} else if (mode & FALLOC_FL_INSERT_RANGE) {
ret = f2fs_insert_range(inode, offset, len);
} else {
ret = expand_inode_data(inode, offset, len, mode);
}
if (!ret) {
inode->i_mtime = inode->i_ctime = current_time(inode);
f2fs_mark_inode_dirty_sync(inode, false);
f2fs_update_time(F2FS_I_SB(inode), REQ_TIME);
}
out:
inode_unlock(inode);
trace_f2fs_fallocate(inode, mode, offset, len, ret);
return ret;
}
static int f2fs_release_file(struct inode *inode, struct file *filp)
{
/*
* f2fs_relase_file is called at every close calls. So we should
* not drop any inmemory pages by close called by other process.
*/
if (!(filp->f_mode & FMODE_WRITE) ||
atomic_read(&inode->i_writecount) != 1)
return 0;
/* some remained atomic pages should discarded */
if (f2fs_is_atomic_file(inode))
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_drop_inmem_pages(inode);
if (f2fs_is_volatile_file(inode)) {
set_inode_flag(inode, FI_DROP_CACHE);
filemap_fdatawrite(inode->i_mapping);
clear_inode_flag(inode, FI_DROP_CACHE);
clear_inode_flag(inode, FI_VOLATILE_FILE);
stat_dec_volatile_write(inode);
}
return 0;
}
static int f2fs_file_flush(struct file *file, fl_owner_t id)
{
struct inode *inode = file_inode(file);
/*
* If the process doing a transaction is crashed, we should do
* roll-back. Otherwise, other reader/write can see corrupted database
* until all the writers close its file. Since this should be done
* before dropping file lock, it needs to do in ->flush.
*/
if (f2fs_is_atomic_file(inode) &&
F2FS_I(inode)->inmem_task == current)
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_drop_inmem_pages(inode);
return 0;
}
static int f2fs_setflags_common(struct inode *inode, u32 iflags, u32 mask)
{
struct f2fs_inode_info *fi = F2FS_I(inode);
u32 masked_flags = fi->i_flags & mask;
/* mask can be shrunk by flags_valid selector */
iflags &= mask;
/* Is it quota file? Do not allow user to mess with it */
if (IS_NOQUOTA(inode))
return -EPERM;
if ((iflags ^ masked_flags) & F2FS_CASEFOLD_FL) {
f2fs: Support case-insensitive file name lookups Modeled after commit b886ee3e778e ("ext4: Support case-insensitive file name lookups") """ This patch implements the actual support for case-insensitive file name lookups in f2fs, based on the feature bit and the encoding stored in the superblock. A filesystem that has the casefold feature set is able to configure directories with the +F (F2FS_CASEFOLD_FL) attribute, enabling lookups to succeed in that directory in a case-insensitive fashion, i.e: match a directory entry even if the name used by userspace is not a byte per byte match with the disk name, but is an equivalent case-insensitive version of the Unicode string. This operation is called a case-insensitive file name lookup. The feature is configured as an inode attribute applied to directories and inherited by its children. This attribute can only be enabled on empty directories for filesystems that support the encoding feature, thus preventing collision of file names that only differ by case. * dcache handling: For a +F directory, F2Fs only stores the first equivalent name dentry used in the dcache. This is done to prevent unintentional duplication of dentries in the dcache, while also allowing the VFS code to quickly find the right entry in the cache despite which equivalent string was used in a previous lookup, without having to resort to ->lookup(). d_hash() of casefolded directories is implemented as the hash of the casefolded string, such that we always have a well-known bucket for all the equivalencies of the same string. d_compare() uses the utf8_strncasecmp() infrastructure, which handles the comparison of equivalent, same case, names as well. For now, negative lookups are not inserted in the dcache, since they would need to be invalidated anyway, because we can't trust missing file dentries. This is bad for performance but requires some leveraging of the vfs layer to fix. We can live without that for now, and so does everyone else. * on-disk data: Despite using a specific version of the name as the internal representation within the dcache, the name stored and fetched from the disk is a byte-per-byte match with what the user requested, making this implementation 'name-preserving'. i.e. no actual information is lost when writing to storage. DX is supported by modifying the hashes used in +F directories to make them case/encoding-aware. The new disk hashes are calculated as the hash of the full casefolded string, instead of the string directly. This allows us to efficiently search for file names in the htree without requiring the user to provide an exact name. * Dealing with invalid sequences: By default, when a invalid UTF-8 sequence is identified, ext4 will treat it as an opaque byte sequence, ignoring the encoding and reverting to the old behavior for that unique file. This means that case-insensitive file name lookup will not work only for that file. An optional bit can be set in the superblock telling the filesystem code and userspace tools to enforce the encoding. When that optional bit is set, any attempt to create a file name using an invalid UTF-8 sequence will fail and return an error to userspace. * Normalization algorithm: The UTF-8 algorithms used to compare strings in f2fs is implemented in fs/unicode, and is based on a previous version developed by SGI. It implements the Canonical decomposition (NFD) algorithm described by the Unicode specification 12.1, or higher, combined with the elimination of ignorable code points (NFDi) and full case-folding (CF) as documented in fs/unicode/utf8_norm.c. NFD seems to be the best normalization method for F2FS because: - It has a lower cost than NFC/NFKC (which requires decomposing to NFD as an intermediary step) - It doesn't eliminate important semantic meaning like compatibility decompositions. Although: - This implementation is not completely linguistic accurate, because different languages have conflicting rules, which would require the specialization of the filesystem to a given locale, which brings all sorts of problems for removable media and for users who use more than one language. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 07:05:29 +08:00
if (!f2fs_sb_has_casefold(F2FS_I_SB(inode)))
return -EOPNOTSUPP;
if (!f2fs_empty_dir(inode))
return -ENOTEMPTY;
}
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (iflags & (F2FS_COMPR_FL | F2FS_NOCOMP_FL)) {
if (!f2fs_sb_has_compression(F2FS_I_SB(inode)))
return -EOPNOTSUPP;
if ((iflags & F2FS_COMPR_FL) && (iflags & F2FS_NOCOMP_FL))
return -EINVAL;
}
if ((iflags ^ masked_flags) & F2FS_COMPR_FL) {
if (masked_flags & F2FS_COMPR_FL) {
if (!f2fs_disable_compressed_file(inode))
return -EINVAL;
}
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (iflags & F2FS_NOCOMP_FL)
return -EINVAL;
if (iflags & F2FS_COMPR_FL) {
if (!f2fs_may_compress(inode))
return -EINVAL;
if (S_ISREG(inode->i_mode) && inode->i_size)
return -EINVAL;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
set_compress_context(inode);
}
}
if ((iflags ^ masked_flags) & F2FS_NOCOMP_FL) {
if (masked_flags & F2FS_COMPR_FL)
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
return -EINVAL;
}
fi->i_flags = iflags | (fi->i_flags & ~mask);
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs_bug_on(F2FS_I_SB(inode), (fi->i_flags & F2FS_COMPR_FL) &&
(fi->i_flags & F2FS_NOCOMP_FL));
if (fi->i_flags & F2FS_PROJINHERIT_FL)
set_inode_flag(inode, FI_PROJ_INHERIT);
else
clear_inode_flag(inode, FI_PROJ_INHERIT);
inode->i_ctime = current_time(inode);
f2fs_set_inode_flags(inode);
f2fs_mark_inode_dirty_sync(inode, true);
return 0;
}
/* FS_IOC_[GS]ETFLAGS and FS_IOC_FS[GS]ETXATTR support */
/*
* To make a new on-disk f2fs i_flag gettable via FS_IOC_GETFLAGS, add an entry
* for it to f2fs_fsflags_map[], and add its FS_*_FL equivalent to
* F2FS_GETTABLE_FS_FL. To also make it settable via FS_IOC_SETFLAGS, also add
* its FS_*_FL equivalent to F2FS_SETTABLE_FS_FL.
*
* Translating flags to fsx_flags value used by FS_IOC_FSGETXATTR and
* FS_IOC_FSSETXATTR is done by the VFS.
*/
static const struct {
u32 iflag;
u32 fsflag;
} f2fs_fsflags_map[] = {
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
{ F2FS_COMPR_FL, FS_COMPR_FL },
{ F2FS_SYNC_FL, FS_SYNC_FL },
{ F2FS_IMMUTABLE_FL, FS_IMMUTABLE_FL },
{ F2FS_APPEND_FL, FS_APPEND_FL },
{ F2FS_NODUMP_FL, FS_NODUMP_FL },
{ F2FS_NOATIME_FL, FS_NOATIME_FL },
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
{ F2FS_NOCOMP_FL, FS_NOCOMP_FL },
{ F2FS_INDEX_FL, FS_INDEX_FL },
{ F2FS_DIRSYNC_FL, FS_DIRSYNC_FL },
{ F2FS_PROJINHERIT_FL, FS_PROJINHERIT_FL },
f2fs: Support case-insensitive file name lookups Modeled after commit b886ee3e778e ("ext4: Support case-insensitive file name lookups") """ This patch implements the actual support for case-insensitive file name lookups in f2fs, based on the feature bit and the encoding stored in the superblock. A filesystem that has the casefold feature set is able to configure directories with the +F (F2FS_CASEFOLD_FL) attribute, enabling lookups to succeed in that directory in a case-insensitive fashion, i.e: match a directory entry even if the name used by userspace is not a byte per byte match with the disk name, but is an equivalent case-insensitive version of the Unicode string. This operation is called a case-insensitive file name lookup. The feature is configured as an inode attribute applied to directories and inherited by its children. This attribute can only be enabled on empty directories for filesystems that support the encoding feature, thus preventing collision of file names that only differ by case. * dcache handling: For a +F directory, F2Fs only stores the first equivalent name dentry used in the dcache. This is done to prevent unintentional duplication of dentries in the dcache, while also allowing the VFS code to quickly find the right entry in the cache despite which equivalent string was used in a previous lookup, without having to resort to ->lookup(). d_hash() of casefolded directories is implemented as the hash of the casefolded string, such that we always have a well-known bucket for all the equivalencies of the same string. d_compare() uses the utf8_strncasecmp() infrastructure, which handles the comparison of equivalent, same case, names as well. For now, negative lookups are not inserted in the dcache, since they would need to be invalidated anyway, because we can't trust missing file dentries. This is bad for performance but requires some leveraging of the vfs layer to fix. We can live without that for now, and so does everyone else. * on-disk data: Despite using a specific version of the name as the internal representation within the dcache, the name stored and fetched from the disk is a byte-per-byte match with what the user requested, making this implementation 'name-preserving'. i.e. no actual information is lost when writing to storage. DX is supported by modifying the hashes used in +F directories to make them case/encoding-aware. The new disk hashes are calculated as the hash of the full casefolded string, instead of the string directly. This allows us to efficiently search for file names in the htree without requiring the user to provide an exact name. * Dealing with invalid sequences: By default, when a invalid UTF-8 sequence is identified, ext4 will treat it as an opaque byte sequence, ignoring the encoding and reverting to the old behavior for that unique file. This means that case-insensitive file name lookup will not work only for that file. An optional bit can be set in the superblock telling the filesystem code and userspace tools to enforce the encoding. When that optional bit is set, any attempt to create a file name using an invalid UTF-8 sequence will fail and return an error to userspace. * Normalization algorithm: The UTF-8 algorithms used to compare strings in f2fs is implemented in fs/unicode, and is based on a previous version developed by SGI. It implements the Canonical decomposition (NFD) algorithm described by the Unicode specification 12.1, or higher, combined with the elimination of ignorable code points (NFDi) and full case-folding (CF) as documented in fs/unicode/utf8_norm.c. NFD seems to be the best normalization method for F2FS because: - It has a lower cost than NFC/NFKC (which requires decomposing to NFD as an intermediary step) - It doesn't eliminate important semantic meaning like compatibility decompositions. Although: - This implementation is not completely linguistic accurate, because different languages have conflicting rules, which would require the specialization of the filesystem to a given locale, which brings all sorts of problems for removable media and for users who use more than one language. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 07:05:29 +08:00
{ F2FS_CASEFOLD_FL, FS_CASEFOLD_FL },
};
#define F2FS_GETTABLE_FS_FL ( \
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
FS_COMPR_FL | \
FS_SYNC_FL | \
FS_IMMUTABLE_FL | \
FS_APPEND_FL | \
FS_NODUMP_FL | \
FS_NOATIME_FL | \
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
FS_NOCOMP_FL | \
FS_INDEX_FL | \
FS_DIRSYNC_FL | \
FS_PROJINHERIT_FL | \
FS_ENCRYPT_FL | \
FS_INLINE_DATA_FL | \
f2fs: add fs-verity support Add fs-verity support to f2fs. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. The f2fs support for fs-verity consists of: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->readpages() to verify data as it's read from verity files and to support reading verity metadata pages. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). Like ext4, f2fs stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by f2fs with only some relatively small changes to f2fs. Extended attributes cannot be used because (a) f2fs limits the total size of an inode's xattr entries to 4096 bytes, which wouldn't be enough for even a single Merkle tree block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity metadata *must* be encrypted when the file is because it contains hashes of the plaintext data. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
FS_NOCOW_FL | \
f2fs-for-5.4-rc1 In this round, we introduced casefolding support in f2fs, and fixed various bugs in individual features such as IO alignment, checkpoint=disable, quota, and swapfile. Enhancement: - support casefolding w/ enhancement in ext4 - support fiemap for directory - support FS_IO_GET|SET_FSLABEL Bug fix: - fix IO stuck during checkpoint=disable - avoid infinite GC loop - fix panic/overflow related to IO alignment feature - fix livelock in swap file - fix discard command leak - disallow dio for atomic_write -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl2FL1wACgkQQBSofoJI UNIRdg/+M6QNiAazIbqzPXyUUkyZQYR5YKhu2abd49o/g38xjTq1afH0PZpQyDrA 9RncR4xsW8F241vPLVoCSanfaa+MxN6xHi3TrD8zYtZWxOcPF6v1ETHeUXGTHuJ2 gqlk+mm+CnY02M6rxW7XwixuXwttT3bF9+cf1YBWRpNoVrR+SjNqgeJS7FmJwXKd nGKb+94OxuygL1NUop+LDUo3qRQjc0Sxv/7qj/K4lhqgTjhAxMYT2KvUP/1MZ7U0 Kh9WIayDXnpoioxMPnt4VEb+JgXfLLFELvQzNjwulk15GIweuJzwVYCBXcRoX0cK eRBRmRy/kRp/e0R1gvl3kYrXQC2AC5QTlBVH/0ESwnaukFiUBKB509vH4aqE/vpB Krldjfg+uMHkc7XiNBf1boDp713vJ76iRKUDWoVb6H/sPbdJ+jtrnUNeBP8CVpWh u31SY1MppnmKhhsoCHQRbhbXO/Z29imBQgF9Tm3IFWImyLY3IU40vFj2fR15gJkL X3x/HWxQynSqyqEOwAZrvhCRTvBAIGIVy5292Di1RkqIoh8saxcqiaywgLz1+eVE 0DCOoh8R6sSbfN/EEh+yZqTxmjo0VGVTw30XVI6QEo4cY5Vfc9u6dN6SRWVRvbjb kPb3dKcMrttgbn3fcXU8Jbw1AOor9N6afHaqs0swQJyci2RwJyc= =oonf -----END PGP SIGNATURE----- Merge tag 'f2fs-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we introduced casefolding support in f2fs, and fixed various bugs in individual features such as IO alignment, checkpoint=disable, quota, and swapfile. Enhancement: - support casefolding w/ enhancement in ext4 - support fiemap for directory - support FS_IO_GET|SET_FSLABEL Bug fix: - fix IO stuck during checkpoint=disable - avoid infinite GC loop - fix panic/overflow related to IO alignment feature - fix livelock in swap file - fix discard command leak - disallow dio for atomic_write" * tag 'f2fs-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits) f2fs: add a condition to detect overflow in f2fs_ioc_gc_range() f2fs: fix to add missing F2FS_IO_ALIGNED() condition f2fs: fix to fallback to buffered IO in IO aligned mode f2fs: fix to handle error path correctly in f2fs_map_blocks f2fs: fix extent corrupotion during directIO in LFS mode f2fs: check all the data segments against all node ones f2fs: Add a small clarification to CONFIG_FS_F2FS_FS_SECURITY f2fs: fix inode rwsem regression f2fs: fix to avoid accessing uninitialized field of inode page in is_alive() f2fs: avoid infinite GC loop due to stale atomic files f2fs: Fix indefinite loop in f2fs_gc() f2fs: convert inline_data in prior to i_size_write f2fs: fix error path of f2fs_convert_inline_page() f2fs: add missing documents of reserve_root/resuid/resgid f2fs: fix flushing node pages when checkpoint is disabled f2fs: enhance f2fs_is_checkpoint_ready()'s readability f2fs: clean up __bio_alloc()'s parameter f2fs: fix wrong error injection path in inc_valid_block_count() f2fs: fix to writeout dirty inode during node flush f2fs: optimize case-insensitive lookups ...
2019-09-22 05:26:33 +08:00
FS_VERITY_FL | \
f2fs: Support case-insensitive file name lookups Modeled after commit b886ee3e778e ("ext4: Support case-insensitive file name lookups") """ This patch implements the actual support for case-insensitive file name lookups in f2fs, based on the feature bit and the encoding stored in the superblock. A filesystem that has the casefold feature set is able to configure directories with the +F (F2FS_CASEFOLD_FL) attribute, enabling lookups to succeed in that directory in a case-insensitive fashion, i.e: match a directory entry even if the name used by userspace is not a byte per byte match with the disk name, but is an equivalent case-insensitive version of the Unicode string. This operation is called a case-insensitive file name lookup. The feature is configured as an inode attribute applied to directories and inherited by its children. This attribute can only be enabled on empty directories for filesystems that support the encoding feature, thus preventing collision of file names that only differ by case. * dcache handling: For a +F directory, F2Fs only stores the first equivalent name dentry used in the dcache. This is done to prevent unintentional duplication of dentries in the dcache, while also allowing the VFS code to quickly find the right entry in the cache despite which equivalent string was used in a previous lookup, without having to resort to ->lookup(). d_hash() of casefolded directories is implemented as the hash of the casefolded string, such that we always have a well-known bucket for all the equivalencies of the same string. d_compare() uses the utf8_strncasecmp() infrastructure, which handles the comparison of equivalent, same case, names as well. For now, negative lookups are not inserted in the dcache, since they would need to be invalidated anyway, because we can't trust missing file dentries. This is bad for performance but requires some leveraging of the vfs layer to fix. We can live without that for now, and so does everyone else. * on-disk data: Despite using a specific version of the name as the internal representation within the dcache, the name stored and fetched from the disk is a byte-per-byte match with what the user requested, making this implementation 'name-preserving'. i.e. no actual information is lost when writing to storage. DX is supported by modifying the hashes used in +F directories to make them case/encoding-aware. The new disk hashes are calculated as the hash of the full casefolded string, instead of the string directly. This allows us to efficiently search for file names in the htree without requiring the user to provide an exact name. * Dealing with invalid sequences: By default, when a invalid UTF-8 sequence is identified, ext4 will treat it as an opaque byte sequence, ignoring the encoding and reverting to the old behavior for that unique file. This means that case-insensitive file name lookup will not work only for that file. An optional bit can be set in the superblock telling the filesystem code and userspace tools to enforce the encoding. When that optional bit is set, any attempt to create a file name using an invalid UTF-8 sequence will fail and return an error to userspace. * Normalization algorithm: The UTF-8 algorithms used to compare strings in f2fs is implemented in fs/unicode, and is based on a previous version developed by SGI. It implements the Canonical decomposition (NFD) algorithm described by the Unicode specification 12.1, or higher, combined with the elimination of ignorable code points (NFDi) and full case-folding (CF) as documented in fs/unicode/utf8_norm.c. NFD seems to be the best normalization method for F2FS because: - It has a lower cost than NFC/NFKC (which requires decomposing to NFD as an intermediary step) - It doesn't eliminate important semantic meaning like compatibility decompositions. Although: - This implementation is not completely linguistic accurate, because different languages have conflicting rules, which would require the specialization of the filesystem to a given locale, which brings all sorts of problems for removable media and for users who use more than one language. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 07:05:29 +08:00
FS_CASEFOLD_FL)
#define F2FS_SETTABLE_FS_FL ( \
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
FS_COMPR_FL | \
FS_SYNC_FL | \
FS_IMMUTABLE_FL | \
FS_APPEND_FL | \
FS_NODUMP_FL | \
FS_NOATIME_FL | \
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
FS_NOCOMP_FL | \
FS_DIRSYNC_FL | \
f2fs: Support case-insensitive file name lookups Modeled after commit b886ee3e778e ("ext4: Support case-insensitive file name lookups") """ This patch implements the actual support for case-insensitive file name lookups in f2fs, based on the feature bit and the encoding stored in the superblock. A filesystem that has the casefold feature set is able to configure directories with the +F (F2FS_CASEFOLD_FL) attribute, enabling lookups to succeed in that directory in a case-insensitive fashion, i.e: match a directory entry even if the name used by userspace is not a byte per byte match with the disk name, but is an equivalent case-insensitive version of the Unicode string. This operation is called a case-insensitive file name lookup. The feature is configured as an inode attribute applied to directories and inherited by its children. This attribute can only be enabled on empty directories for filesystems that support the encoding feature, thus preventing collision of file names that only differ by case. * dcache handling: For a +F directory, F2Fs only stores the first equivalent name dentry used in the dcache. This is done to prevent unintentional duplication of dentries in the dcache, while also allowing the VFS code to quickly find the right entry in the cache despite which equivalent string was used in a previous lookup, without having to resort to ->lookup(). d_hash() of casefolded directories is implemented as the hash of the casefolded string, such that we always have a well-known bucket for all the equivalencies of the same string. d_compare() uses the utf8_strncasecmp() infrastructure, which handles the comparison of equivalent, same case, names as well. For now, negative lookups are not inserted in the dcache, since they would need to be invalidated anyway, because we can't trust missing file dentries. This is bad for performance but requires some leveraging of the vfs layer to fix. We can live without that for now, and so does everyone else. * on-disk data: Despite using a specific version of the name as the internal representation within the dcache, the name stored and fetched from the disk is a byte-per-byte match with what the user requested, making this implementation 'name-preserving'. i.e. no actual information is lost when writing to storage. DX is supported by modifying the hashes used in +F directories to make them case/encoding-aware. The new disk hashes are calculated as the hash of the full casefolded string, instead of the string directly. This allows us to efficiently search for file names in the htree without requiring the user to provide an exact name. * Dealing with invalid sequences: By default, when a invalid UTF-8 sequence is identified, ext4 will treat it as an opaque byte sequence, ignoring the encoding and reverting to the old behavior for that unique file. This means that case-insensitive file name lookup will not work only for that file. An optional bit can be set in the superblock telling the filesystem code and userspace tools to enforce the encoding. When that optional bit is set, any attempt to create a file name using an invalid UTF-8 sequence will fail and return an error to userspace. * Normalization algorithm: The UTF-8 algorithms used to compare strings in f2fs is implemented in fs/unicode, and is based on a previous version developed by SGI. It implements the Canonical decomposition (NFD) algorithm described by the Unicode specification 12.1, or higher, combined with the elimination of ignorable code points (NFDi) and full case-folding (CF) as documented in fs/unicode/utf8_norm.c. NFD seems to be the best normalization method for F2FS because: - It has a lower cost than NFC/NFKC (which requires decomposing to NFD as an intermediary step) - It doesn't eliminate important semantic meaning like compatibility decompositions. Although: - This implementation is not completely linguistic accurate, because different languages have conflicting rules, which would require the specialization of the filesystem to a given locale, which brings all sorts of problems for removable media and for users who use more than one language. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 07:05:29 +08:00
FS_PROJINHERIT_FL | \
FS_CASEFOLD_FL)
/* Convert f2fs on-disk i_flags to FS_IOC_{GET,SET}FLAGS flags */
static inline u32 f2fs_iflags_to_fsflags(u32 iflags)
{
u32 fsflags = 0;
int i;
for (i = 0; i < ARRAY_SIZE(f2fs_fsflags_map); i++)
if (iflags & f2fs_fsflags_map[i].iflag)
fsflags |= f2fs_fsflags_map[i].fsflag;
return fsflags;
}
/* Convert FS_IOC_{GET,SET}FLAGS flags to f2fs on-disk i_flags */
static inline u32 f2fs_fsflags_to_iflags(u32 fsflags)
{
u32 iflags = 0;
int i;
for (i = 0; i < ARRAY_SIZE(f2fs_fsflags_map); i++)
if (fsflags & f2fs_fsflags_map[i].fsflag)
iflags |= f2fs_fsflags_map[i].iflag;
return iflags;
}
static int f2fs_ioc_getversion(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
return put_user(inode->i_generation, (int __user *)arg);
}
static int f2fs_ioc_start_atomic_write(struct file *filp)
{
struct inode *inode = file_inode(filp);
struct user_namespace *mnt_userns = file_mnt_user_ns(filp);
f2fs: avoid infinite GC loop due to stale atomic files If committing atomic pages is failed when doing f2fs_do_sync_file(), we can get commited pages but atomic_file being still set like: - inmem: 0, atomic IO: 4 (Max. 10), volatile IO: 0 (Max. 0) If GC selects this block, we can get an infinite loop like this: f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096 f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234 f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096 f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234 f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c In that moment, we can observe: [Before] Try to move 5084219 blocks (BG: 384508) - data blocks : 4962373 (274483) - node blocks : 121846 (110025) Skipped : atomic write 4534686 (10) [After] Try to move 5088973 blocks (BG: 384508) - data blocks : 4967127 (274483) - node blocks : 121846 (110025) Skipped : atomic write 4539440 (10) So, refactor atomic_write flow like this: 1. start_atomic_write - add inmem_list and set atomic_file 2. write() - register it in inmem_pages 3. commit_atomic_write - if no error, f2fs_drop_inmem_pages() - f2fs_commit_inmme_pages() failed : __revoked_inmem_pages() was done - f2fs_do_sync_file failed : abort_atomic_write later 4. abort_atomic_write - f2fs_drop_inmem_pages 5. f2fs_drop_inmem_pages - clear atomic_file - remove inmem_list Based on this change, when GC fails to move block in atomic_file, f2fs_drop_inmem_pages_all() can call f2fs_drop_inmem_pages(). Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-09 20:10:59 +08:00
struct f2fs_inode_info *fi = F2FS_I(inode);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
int ret;
if (!inode_owner_or_capable(mnt_userns, inode))
return -EACCES;
if (!S_ISREG(inode->i_mode))
return -EINVAL;
if (filp->f_flags & O_DIRECT)
return -EINVAL;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
inode_lock(inode);
if (!f2fs_disable_compressed_file(inode)) {
ret = -EINVAL;
goto out;
}
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (f2fs_is_atomic_file(inode)) {
if (is_inode_flag_set(inode, FI_ATOMIC_REVOKE_REQUEST))
ret = -EINVAL;
goto out;
}
ret = f2fs_convert_inline_inode(inode);
if (ret)
goto out;
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
/*
* Should wait end_io to count F2FS_WB_CP_DATA correctly by
* f2fs_is_atomic_file.
*/
if (get_dirty_pages(inode))
f2fs_warn(F2FS_I_SB(inode), "Unexpected flush for atomic writes: ino=%lu, npages=%u",
inode->i_ino, get_dirty_pages(inode));
ret = filemap_write_and_wait_range(inode->i_mapping, 0, LLONG_MAX);
if (ret) {
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
goto out;
}
f2fs: avoid infinite GC loop due to stale atomic files If committing atomic pages is failed when doing f2fs_do_sync_file(), we can get commited pages but atomic_file being still set like: - inmem: 0, atomic IO: 4 (Max. 10), volatile IO: 0 (Max. 0) If GC selects this block, we can get an infinite loop like this: f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096 f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234 f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096 f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234 f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c In that moment, we can observe: [Before] Try to move 5084219 blocks (BG: 384508) - data blocks : 4962373 (274483) - node blocks : 121846 (110025) Skipped : atomic write 4534686 (10) [After] Try to move 5088973 blocks (BG: 384508) - data blocks : 4967127 (274483) - node blocks : 121846 (110025) Skipped : atomic write 4539440 (10) So, refactor atomic_write flow like this: 1. start_atomic_write - add inmem_list and set atomic_file 2. write() - register it in inmem_pages 3. commit_atomic_write - if no error, f2fs_drop_inmem_pages() - f2fs_commit_inmme_pages() failed : __revoked_inmem_pages() was done - f2fs_do_sync_file failed : abort_atomic_write later 4. abort_atomic_write - f2fs_drop_inmem_pages 5. f2fs_drop_inmem_pages - clear atomic_file - remove inmem_list Based on this change, when GC fails to move block in atomic_file, f2fs_drop_inmem_pages_all() can call f2fs_drop_inmem_pages(). Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-09 20:10:59 +08:00
spin_lock(&sbi->inode_lock[ATOMIC_FILE]);
if (list_empty(&fi->inmem_ilist))
list_add_tail(&fi->inmem_ilist, &sbi->inode_list[ATOMIC_FILE]);
sbi->atomic_files++;
f2fs: avoid infinite GC loop due to stale atomic files If committing atomic pages is failed when doing f2fs_do_sync_file(), we can get commited pages but atomic_file being still set like: - inmem: 0, atomic IO: 4 (Max. 10), volatile IO: 0 (Max. 0) If GC selects this block, we can get an infinite loop like this: f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096 f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234 f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096 f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234 f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c In that moment, we can observe: [Before] Try to move 5084219 blocks (BG: 384508) - data blocks : 4962373 (274483) - node blocks : 121846 (110025) Skipped : atomic write 4534686 (10) [After] Try to move 5088973 blocks (BG: 384508) - data blocks : 4967127 (274483) - node blocks : 121846 (110025) Skipped : atomic write 4539440 (10) So, refactor atomic_write flow like this: 1. start_atomic_write - add inmem_list and set atomic_file 2. write() - register it in inmem_pages 3. commit_atomic_write - if no error, f2fs_drop_inmem_pages() - f2fs_commit_inmme_pages() failed : __revoked_inmem_pages() was done - f2fs_do_sync_file failed : abort_atomic_write later 4. abort_atomic_write - f2fs_drop_inmem_pages 5. f2fs_drop_inmem_pages - clear atomic_file - remove inmem_list Based on this change, when GC fails to move block in atomic_file, f2fs_drop_inmem_pages_all() can call f2fs_drop_inmem_pages(). Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-09 20:10:59 +08:00
spin_unlock(&sbi->inode_lock[ATOMIC_FILE]);
/* add inode in inmem_list first and set atomic_file */
set_inode_flag(inode, FI_ATOMIC_FILE);
clear_inode_flag(inode, FI_ATOMIC_REVOKE_REQUEST);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
f2fs_update_time(F2FS_I_SB(inode), REQ_TIME);
F2FS_I(inode)->inmem_task = current;
stat_update_max_atomic_write(inode);
out:
inode_unlock(inode);
mnt_drop_write_file(filp);
return ret;
}
static int f2fs_ioc_commit_atomic_write(struct file *filp)
{
struct inode *inode = file_inode(filp);
struct user_namespace *mnt_userns = file_mnt_user_ns(filp);
int ret;
if (!inode_owner_or_capable(mnt_userns, inode))
return -EACCES;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
f2fs_balance_fs(F2FS_I_SB(inode), true);
inode_lock(inode);
if (f2fs_is_volatile_file(inode)) {
ret = -EINVAL;
goto err_out;
}
f2fs: call set_page_dirty to attach i_wb for cgroup The cgroup attaches inode->i_wb via mark_inode_dirty and when set_page_writeback is called, __inc_wb_stat() updates i_wb's stat. So, we need to explicitly call set_page_dirty->__mark_inode_dirty in prior to any writebacking pages. This patch should resolve the following kernel panic reported by Andreas Reis. https://bugzilla.kernel.org/show_bug.cgi?id=101801 --- Comment #2 from Andreas Reis <andreas.reis@gmail.com> --- BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 IP: [<ffffffff8149deea>] __percpu_counter_add+0x1a/0x90 PGD 2951ff067 PUD 2df43f067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 7 PID: 10356 Comm: gcc Tainted: G W 4.2.0-1-cu #1 Hardware name: Gigabyte Technology Co., Ltd. G1.Sniper M5/G1.Sniper M5, BIOS T01 02/03/2015 task: ffff880295044f80 ti: ffff880295140000 task.ti: ffff880295140000 RIP: 0010:[<ffffffff8149deea>] [<ffffffff8149deea>] __percpu_counter_add+0x1a/0x90 RSP: 0018:ffff880295143ac8 EFLAGS: 00010082 RAX: 0000000000000003 RBX: ffffea000a526d40 RCX: 0000000000000001 RDX: 0000000000000020 RSI: 0000000000000001 RDI: 0000000000000088 RBP: ffff880295143ae8 R08: 0000000000000000 R09: ffff88008f69bb30 R10: 00000000fffffffa R11: 0000000000000000 R12: 0000000000000088 R13: 0000000000000001 R14: ffff88041d099000 R15: ffff880084a205d0 FS: 00007f8549374700(0000) GS:ffff88042f3c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a8 CR3: 000000033e1d5000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: 0000000000000000 ffffea000a526d40 ffff880084a20738 ffff880084a20750 ffff880295143b48 ffffffff811cc91e ffff880000000000 0000000000000296 0000000000000000 ffff880417090198 0000000000000000 ffffea000a526d40 Call Trace: [<ffffffff811cc91e>] __test_set_page_writeback+0xde/0x1d0 [<ffffffff813fee87>] do_write_data_page+0xe7/0x3a0 [<ffffffff813faeea>] gc_data_segment+0x5aa/0x640 [<ffffffff813fb0b8>] do_garbage_collect+0x138/0x150 [<ffffffff813fb3fe>] f2fs_gc+0x1be/0x3e0 [<ffffffff81405541>] f2fs_balance_fs+0x81/0x90 [<ffffffff813ee357>] f2fs_unlink+0x47/0x1d0 [<ffffffff81239329>] vfs_unlink+0x109/0x1b0 [<ffffffff8123e3d7>] do_unlinkat+0x287/0x2c0 [<ffffffff8123ebc6>] SyS_unlink+0x16/0x20 [<ffffffff81942e2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Code: 41 5e 5d c3 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 55 49 89 f5 41 54 49 89 fc 53 48 83 ec 08 65 ff 05 e6 d9 b6 7e <48> 8b 47 20 48 63 ca 65 8b 18 48 63 db 48 01 f3 48 39 cb 7d 0a RIP [<ffffffff8149deea>] __percpu_counter_add+0x1a/0x90 RSP <ffff880295143ac8> CR2: 00000000000000a8 ---[ end trace 5132449a58ed93a3 ]--- note: gcc[10356] exited with preempt_count 2 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-25 15:29:17 +08:00
if (f2fs_is_atomic_file(inode)) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
ret = f2fs_commit_inmem_pages(inode);
if (ret)
goto err_out;
ret = f2fs_do_sync_file(filp, 0, LLONG_MAX, 0, true);
f2fs: avoid infinite GC loop due to stale atomic files If committing atomic pages is failed when doing f2fs_do_sync_file(), we can get commited pages but atomic_file being still set like: - inmem: 0, atomic IO: 4 (Max. 10), volatile IO: 0 (Max. 0) If GC selects this block, we can get an infinite loop like this: f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096 f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234 f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c f2fs_submit_page_bio: dev = (253,7), ino = 2, page_index = 0x2359a8, oldaddr = 0x2359a8, newaddr = 0x2359a8, rw = READ(), type = COLD_DATA f2fs_submit_read_bio: dev = (253,7)/(253,7), rw = READ(), DATA, sector = 18533696, size = 4096 f2fs_get_victim: dev = (253,7), type = No TYPE, policy = (Foreground GC, LFS-mode, Greedy), victim = 4355, cost = 1, ofs_unit = 1, pre_victim_secno = 4355, prefree = 0, free = 234 f2fs_iget: dev = (253,7), ino = 6247, pino = 5845, i_mode = 0x81b0, i_size = 319488, i_nlink = 1, i_blocks = 624, i_advise = 0x2c In that moment, we can observe: [Before] Try to move 5084219 blocks (BG: 384508) - data blocks : 4962373 (274483) - node blocks : 121846 (110025) Skipped : atomic write 4534686 (10) [After] Try to move 5088973 blocks (BG: 384508) - data blocks : 4967127 (274483) - node blocks : 121846 (110025) Skipped : atomic write 4539440 (10) So, refactor atomic_write flow like this: 1. start_atomic_write - add inmem_list and set atomic_file 2. write() - register it in inmem_pages 3. commit_atomic_write - if no error, f2fs_drop_inmem_pages() - f2fs_commit_inmme_pages() failed : __revoked_inmem_pages() was done - f2fs_do_sync_file failed : abort_atomic_write later 4. abort_atomic_write - f2fs_drop_inmem_pages 5. f2fs_drop_inmem_pages - clear atomic_file - remove inmem_list Based on this change, when GC fails to move block in atomic_file, f2fs_drop_inmem_pages_all() can call f2fs_drop_inmem_pages(). Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-09 20:10:59 +08:00
if (!ret)
f2fs_drop_inmem_pages(inode);
} else {
ret = f2fs_do_sync_file(filp, 0, LLONG_MAX, 1, false);
f2fs: call set_page_dirty to attach i_wb for cgroup The cgroup attaches inode->i_wb via mark_inode_dirty and when set_page_writeback is called, __inc_wb_stat() updates i_wb's stat. So, we need to explicitly call set_page_dirty->__mark_inode_dirty in prior to any writebacking pages. This patch should resolve the following kernel panic reported by Andreas Reis. https://bugzilla.kernel.org/show_bug.cgi?id=101801 --- Comment #2 from Andreas Reis <andreas.reis@gmail.com> --- BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 IP: [<ffffffff8149deea>] __percpu_counter_add+0x1a/0x90 PGD 2951ff067 PUD 2df43f067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 7 PID: 10356 Comm: gcc Tainted: G W 4.2.0-1-cu #1 Hardware name: Gigabyte Technology Co., Ltd. G1.Sniper M5/G1.Sniper M5, BIOS T01 02/03/2015 task: ffff880295044f80 ti: ffff880295140000 task.ti: ffff880295140000 RIP: 0010:[<ffffffff8149deea>] [<ffffffff8149deea>] __percpu_counter_add+0x1a/0x90 RSP: 0018:ffff880295143ac8 EFLAGS: 00010082 RAX: 0000000000000003 RBX: ffffea000a526d40 RCX: 0000000000000001 RDX: 0000000000000020 RSI: 0000000000000001 RDI: 0000000000000088 RBP: ffff880295143ae8 R08: 0000000000000000 R09: ffff88008f69bb30 R10: 00000000fffffffa R11: 0000000000000000 R12: 0000000000000088 R13: 0000000000000001 R14: ffff88041d099000 R15: ffff880084a205d0 FS: 00007f8549374700(0000) GS:ffff88042f3c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a8 CR3: 000000033e1d5000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: 0000000000000000 ffffea000a526d40 ffff880084a20738 ffff880084a20750 ffff880295143b48 ffffffff811cc91e ffff880000000000 0000000000000296 0000000000000000 ffff880417090198 0000000000000000 ffffea000a526d40 Call Trace: [<ffffffff811cc91e>] __test_set_page_writeback+0xde/0x1d0 [<ffffffff813fee87>] do_write_data_page+0xe7/0x3a0 [<ffffffff813faeea>] gc_data_segment+0x5aa/0x640 [<ffffffff813fb0b8>] do_garbage_collect+0x138/0x150 [<ffffffff813fb3fe>] f2fs_gc+0x1be/0x3e0 [<ffffffff81405541>] f2fs_balance_fs+0x81/0x90 [<ffffffff813ee357>] f2fs_unlink+0x47/0x1d0 [<ffffffff81239329>] vfs_unlink+0x109/0x1b0 [<ffffffff8123e3d7>] do_unlinkat+0x287/0x2c0 [<ffffffff8123ebc6>] SyS_unlink+0x16/0x20 [<ffffffff81942e2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Code: 41 5e 5d c3 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 55 49 89 f5 41 54 49 89 fc 53 48 83 ec 08 65 ff 05 e6 d9 b6 7e <48> 8b 47 20 48 63 ca 65 8b 18 48 63 db 48 01 f3 48 39 cb 7d 0a RIP [<ffffffff8149deea>] __percpu_counter_add+0x1a/0x90 RSP <ffff880295143ac8> CR2: 00000000000000a8 ---[ end trace 5132449a58ed93a3 ]--- note: gcc[10356] exited with preempt_count 2 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-25 15:29:17 +08:00
}
err_out:
if (is_inode_flag_set(inode, FI_ATOMIC_REVOKE_REQUEST)) {
clear_inode_flag(inode, FI_ATOMIC_REVOKE_REQUEST);
ret = -EINVAL;
}
inode_unlock(inode);
mnt_drop_write_file(filp);
return ret;
}
static int f2fs_ioc_start_volatile_write(struct file *filp)
{
struct inode *inode = file_inode(filp);
struct user_namespace *mnt_userns = file_mnt_user_ns(filp);
int ret;
if (!inode_owner_or_capable(mnt_userns, inode))
return -EACCES;
if (!S_ISREG(inode->i_mode))
return -EINVAL;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
inode_lock(inode);
if (f2fs_is_volatile_file(inode))
goto out;
ret = f2fs_convert_inline_inode(inode);
if (ret)
goto out;
stat_inc_volatile_write(inode);
stat_update_max_volatile_write(inode);
set_inode_flag(inode, FI_VOLATILE_FILE);
f2fs_update_time(F2FS_I_SB(inode), REQ_TIME);
out:
inode_unlock(inode);
mnt_drop_write_file(filp);
return ret;
}
static int f2fs_ioc_release_volatile_write(struct file *filp)
{
struct inode *inode = file_inode(filp);
struct user_namespace *mnt_userns = file_mnt_user_ns(filp);
int ret;
if (!inode_owner_or_capable(mnt_userns, inode))
return -EACCES;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
inode_lock(inode);
if (!f2fs_is_volatile_file(inode))
goto out;
if (!f2fs_is_first_block_written(inode)) {
ret = truncate_partial_data_page(inode, 0, true);
goto out;
}
ret = punch_hole(inode, 0, F2FS_BLKSIZE);
out:
inode_unlock(inode);
mnt_drop_write_file(filp);
return ret;
}
static int f2fs_ioc_abort_volatile_write(struct file *filp)
{
struct inode *inode = file_inode(filp);
struct user_namespace *mnt_userns = file_mnt_user_ns(filp);
int ret;
if (!inode_owner_or_capable(mnt_userns, inode))
return -EACCES;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
inode_lock(inode);
if (f2fs_is_atomic_file(inode))
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_drop_inmem_pages(inode);
if (f2fs_is_volatile_file(inode)) {
clear_inode_flag(inode, FI_VOLATILE_FILE);
stat_dec_volatile_write(inode);
ret = f2fs_do_sync_file(filp, 0, LLONG_MAX, 0, true);
}
clear_inode_flag(inode, FI_ATOMIC_REVOKE_REQUEST);
inode_unlock(inode);
mnt_drop_write_file(filp);
f2fs_update_time(F2FS_I_SB(inode), REQ_TIME);
return ret;
}
static int f2fs_ioc_shutdown(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct super_block *sb = sbi->sb;
__u32 in;
int ret = 0;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (get_user(in, (__u32 __user *)arg))
return -EFAULT;
if (in != F2FS_GOING_DOWN_FULLSYNC) {
ret = mnt_want_write_file(filp);
if (ret) {
if (ret == -EROFS) {
ret = 0;
f2fs_stop_checkpoint(sbi, false);
set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
trace_f2fs_shutdown(sbi, in, ret);
}
return ret;
}
}
switch (in) {
case F2FS_GOING_DOWN_FULLSYNC:
ret = freeze_bdev(sb->s_bdev);
if (ret)
goto out;
f2fs_stop_checkpoint(sbi, false);
set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
thaw_bdev(sb->s_bdev);
break;
case F2FS_GOING_DOWN_METASYNC:
/* do checkpoint only */
ret = f2fs_sync_fs(sb, 1);
if (ret)
goto out;
f2fs_stop_checkpoint(sbi, false);
set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
break;
case F2FS_GOING_DOWN_NOSYNC:
f2fs_stop_checkpoint(sbi, false);
set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
break;
case F2FS_GOING_DOWN_METAFLUSH:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_sync_meta_pages(sbi, META, LONG_MAX, FS_META_IO);
f2fs_stop_checkpoint(sbi, false);
set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
break;
case F2FS_GOING_DOWN_NEED_FSCK:
set_sbi_flag(sbi, SBI_NEED_FSCK);
set_sbi_flag(sbi, SBI_CP_DISABLED_QUICK);
set_sbi_flag(sbi, SBI_IS_DIRTY);
/* do checkpoint only */
ret = f2fs_sync_fs(sb, 1);
goto out;
default:
ret = -EINVAL;
goto out;
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_stop_gc_thread(sbi);
f2fs_stop_discard_thread(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_drop_discard_cmd(sbi);
clear_opt(sbi, DISCARD);
f2fs_update_time(sbi, REQ_TIME);
out:
if (in != F2FS_GOING_DOWN_FULLSYNC)
mnt_drop_write_file(filp);
trace_f2fs_shutdown(sbi, in, ret);
return ret;
}
static int f2fs_ioc_fitrim(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct super_block *sb = inode->i_sb;
struct request_queue *q = bdev_get_queue(sb->s_bdev);
struct fstrim_range range;
int ret;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
f2fs: fix to avoid NULL pointer dereference on se->discard_map https://bugzilla.kernel.org/show_bug.cgi?id=200951 These is a NULL pointer dereference issue reported in bugzilla: Hi, in the setup there is a SATA SSD connected to a SATA-to-USB bridge. The disc is "Samsung SSD 850 PRO 256G" which supports TRIM. There are four partitions: sda1: FAT /boot sda2: F2FS / sda3: F2FS /home sda4: F2FS The bridge is ASMT1153e which uses the "uas" driver. There is no TRIM pass-through, so, when mounting it reports: mounting with "discard" option, but the device does not support discard The USB host is USB3.0 and UASP capable. It is the one on RK3399. Given this everything works fine, except there is no TRIM support. In order to enable TRIM a new UDEV rule is added [1]: /etc/udev/rules.d/10-sata-bridge-trim.rules: ACTION=="add|change", ATTRS{idVendor}=="174c", ATTRS{idProduct}=="55aa", SUBSYSTEM=="scsi_disk", ATTR{provisioning_mode}="unmap" After reboot any F2FS write hangs forever and dmesg reports: Unable to handle kernel NULL pointer dereference Also tested on a x86_64 system: works fine even with TRIM enabled. same disc same bridge different usb host controller different cpu architecture not root filesystem Regards, Vicenç. [1] Post #5 in https://bbs.archlinux.org/viewtopic.php?id=236280 Unable to handle kernel NULL pointer dereference at virtual address 000000000000003e Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000626e3122 [000000000000003e] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Modules linked in: overlay snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec snd_soc_simple_card snd_soc_simple_card_utils snd_soc_rockchip_i2s rockchip_rga snd_soc_rockchip_pcm rockchipdrm videobuf2_dma_sg v4l2_mem2mem rtc_rk808 videobuf2_memops analogix_dp videobuf2_v4l2 videobuf2_common dw_hdmi dw_wdt cec rc_core videodev drm_kms_helper media drm rockchip_thermal rockchip_saradc realtek drm_panel_orientation_quirks syscopyarea sysfillrect sysimgblt fb_sys_fops dwmac_rk stmmac_platform stmmac pwm_bl squashfs loop crypto_user gpio_keys hid_kensington CPU: 5 PID: 957 Comm: nvim Not tainted 4.19.0-rc1-1-ARCH #1 Hardware name: Sapphire-RK3399 Board (DT) pstate: 00000005 (nzcv daif -PAN -UAO) pc : update_sit_entry+0x304/0x4b0 lr : update_sit_entry+0x108/0x4b0 sp : ffff00000ca13bd0 x29: ffff00000ca13bd0 x28: 000000000000003e x27: 0000000000000020 x26: 0000000000080000 x25: 0000000000000048 x24: ffff8000ebb85cf8 x23: 0000000000000253 x22: 00000000ffffffff x21: 00000000000535f2 x20: 00000000ffffffdf x19: ffff8000eb9e6800 x18: ffff8000eb9e6be8 x17: 0000000007ce6926 x16: 000000001c83ffa8 x15: 0000000000000000 x14: ffff8000f602df90 x13: 0000000000000006 x12: 0000000000000040 x11: 0000000000000228 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 00000000000535f2 x6 : ffff8000ebff3440 x5 : ffff8000ebff3440 x4 : ffff8000ebe3a6c8 x3 : 00000000ffffffff x2 : 0000000000000020 x1 : 0000000000000000 x0 : ffff8000eb9e5800 Process nvim (pid: 957, stack limit = 0x0000000063a78320) Call trace: update_sit_entry+0x304/0x4b0 f2fs_invalidate_blocks+0x98/0x140 truncate_node+0x90/0x400 f2fs_remove_inode_page+0xe8/0x340 f2fs_evict_inode+0x2b0/0x408 evict+0xe0/0x1e0 iput+0x160/0x260 do_unlinkat+0x214/0x298 __arm64_sys_unlinkat+0x3c/0x68 el0_svc_handler+0x94/0x118 el0_svc+0x8/0xc Code: f9400800 b9488400 36080140 f9400f01 (387c4820) ---[ end trace a0f21a307118c477 ]--- The reason is it is possible to enable discard flag on block queue via UDEV, but during mount, f2fs will initialize se->discard_map only if this flag is set, once the flag is set after mount, f2fs may dereference NULL pointer on se->discard_map. So this patch does below changes to fix this issue: - initialize and update se->discard_map all the time. - don't clear DISCARD option if device has no QUEUE_FLAG_DISCARD flag during mount. - don't issue small discard on zoned block device. - introduce some functions to enhance the readability. Signed-off-by: Chao Yu <yuchao0@huawei.com> Tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-04 03:52:17 +08:00
if (!f2fs_hw_support_discard(F2FS_SB(sb)))
return -EOPNOTSUPP;
if (copy_from_user(&range, (struct fstrim_range __user *)arg,
sizeof(range)))
return -EFAULT;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
range.minlen = max((unsigned int)range.minlen,
q->limits.discard_granularity);
ret = f2fs_trim_fs(F2FS_SB(sb), &range);
mnt_drop_write_file(filp);
if (ret < 0)
return ret;
if (copy_to_user((struct fstrim_range __user *)arg, &range,
sizeof(range)))
return -EFAULT;
f2fs_update_time(F2FS_I_SB(inode), REQ_TIME);
return 0;
}
static bool uuid_is_nonzero(__u8 u[16])
{
int i;
for (i = 0; i < 16; i++)
if (u[i])
return true;
return false;
}
static int f2fs_ioc_set_encryption_policy(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
if (!f2fs_sb_has_encrypt(F2FS_I_SB(inode)))
return -EOPNOTSUPP;
f2fs_update_time(F2FS_I_SB(inode), REQ_TIME);
return fscrypt_ioctl_set_policy(filp, (const void __user *)arg);
}
static int f2fs_ioc_get_encryption_policy(struct file *filp, unsigned long arg)
{
if (!f2fs_sb_has_encrypt(F2FS_I_SB(file_inode(filp))))
return -EOPNOTSUPP;
return fscrypt_ioctl_get_policy(filp, (void __user *)arg);
}
static int f2fs_ioc_get_encryption_pwsalt(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
int err;
if (!f2fs_sb_has_encrypt(sbi))
return -EOPNOTSUPP;
err = mnt_want_write_file(filp);
if (err)
return err;
f2fs_down_write(&sbi->sb_lock);
if (uuid_is_nonzero(sbi->raw_super->encrypt_pw_salt))
goto got_it;
/* update superblock with uuid */
generate_random_uuid(sbi->raw_super->encrypt_pw_salt);
err = f2fs_commit_super(sbi, false);
if (err) {
/* undo new data */
memset(sbi->raw_super->encrypt_pw_salt, 0, 16);
goto out_err;
}
got_it:
if (copy_to_user((__u8 __user *)arg, sbi->raw_super->encrypt_pw_salt,
16))
err = -EFAULT;
out_err:
f2fs_up_write(&sbi->sb_lock);
mnt_drop_write_file(filp);
return err;
}
static int f2fs_ioc_get_encryption_policy_ex(struct file *filp,
unsigned long arg)
{
if (!f2fs_sb_has_encrypt(F2FS_I_SB(file_inode(filp))))
return -EOPNOTSUPP;
return fscrypt_ioctl_get_policy_ex(filp, (void __user *)arg);
}
static int f2fs_ioc_add_encryption_key(struct file *filp, unsigned long arg)
{
if (!f2fs_sb_has_encrypt(F2FS_I_SB(file_inode(filp))))
return -EOPNOTSUPP;
return fscrypt_ioctl_add_key(filp, (void __user *)arg);
}
static int f2fs_ioc_remove_encryption_key(struct file *filp, unsigned long arg)
{
if (!f2fs_sb_has_encrypt(F2FS_I_SB(file_inode(filp))))
return -EOPNOTSUPP;
return fscrypt_ioctl_remove_key(filp, (void __user *)arg);
}
static int f2fs_ioc_remove_encryption_key_all_users(struct file *filp,
unsigned long arg)
{
if (!f2fs_sb_has_encrypt(F2FS_I_SB(file_inode(filp))))
return -EOPNOTSUPP;
return fscrypt_ioctl_remove_key_all_users(filp, (void __user *)arg);
}
static int f2fs_ioc_get_encryption_key_status(struct file *filp,
unsigned long arg)
{
if (!f2fs_sb_has_encrypt(F2FS_I_SB(file_inode(filp))))
return -EOPNOTSUPP;
return fscrypt_ioctl_get_key_status(filp, (void __user *)arg);
}
static int f2fs_ioc_get_encryption_nonce(struct file *filp, unsigned long arg)
{
if (!f2fs_sb_has_encrypt(F2FS_I_SB(file_inode(filp))))
return -EOPNOTSUPP;
return fscrypt_ioctl_get_nonce(filp, (void __user *)arg);
}
static int f2fs_ioc_gc(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
__u32 sync;
int ret;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (get_user(sync, (__u32 __user *)arg))
return -EFAULT;
if (f2fs_readonly(sbi->sb))
return -EROFS;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
if (!sync) {
if (!f2fs_down_write_trylock(&sbi->gc_lock)) {
ret = -EBUSY;
goto out;
}
} else {
f2fs_down_write(&sbi->gc_lock);
}
ret = f2fs_gc(sbi, sync, true, false, NULL_SEGNO);
out:
mnt_drop_write_file(filp);
return ret;
}
static int __f2fs_ioc_gc_range(struct file *filp, struct f2fs_gc_range *range)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(file_inode(filp));
u64 end;
int ret;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (f2fs_readonly(sbi->sb))
return -EROFS;
end = range->start + range->len;
if (end < range->start || range->start < MAIN_BLKADDR(sbi) ||
end >= MAX_BLKADDR(sbi))
return -EINVAL;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
do_more:
if (!range->sync) {
if (!f2fs_down_write_trylock(&sbi->gc_lock)) {
ret = -EBUSY;
goto out;
}
} else {
f2fs_down_write(&sbi->gc_lock);
}
ret = f2fs_gc(sbi, range->sync, true, false,
GET_SEGNO(sbi, range->start));
if (ret) {
if (ret == -EBUSY)
ret = -EAGAIN;
goto out;
}
range->start += BLKS_PER_SEC(sbi);
if (range->start <= end)
goto do_more;
out:
mnt_drop_write_file(filp);
return ret;
}
static int f2fs_ioc_gc_range(struct file *filp, unsigned long arg)
{
struct f2fs_gc_range range;
if (copy_from_user(&range, (struct f2fs_gc_range __user *)arg,
sizeof(range)))
return -EFAULT;
return __f2fs_ioc_gc_range(filp, &range);
}
static int f2fs_ioc_write_checkpoint(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
int ret;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (f2fs_readonly(sbi->sb))
return -EROFS;
if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED))) {
f2fs_info(sbi, "Skipping Checkpoint. Checkpoints currently disabled.");
return -EINVAL;
}
ret = mnt_want_write_file(filp);
if (ret)
return ret;
ret = f2fs_sync_fs(sbi->sb, 1);
mnt_drop_write_file(filp);
return ret;
}
static int f2fs_defragment_range(struct f2fs_sb_info *sbi,
struct file *filp,
struct f2fs_defragment *range)
{
struct inode *inode = file_inode(filp);
struct f2fs_map_blocks map = { .m_next_extent = NULL,
.m_seg_type = NO_CHECK_TYPE,
.m_may_create = false };
struct extent_info ei = {0, 0, 0};
pgoff_t pg_start, pg_end, next_pgofs;
unsigned int blk_per_seg = sbi->blocks_per_seg;
unsigned int total = 0, sec_num;
block_t blk_end = 0;
bool fragmented = false;
int err;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pg_start = range->start >> PAGE_SHIFT;
pg_end = (range->start + range->len) >> PAGE_SHIFT;
f2fs_balance_fs(sbi, true);
inode_lock(inode);
/* if in-place-update policy is enabled, don't waste time here */
set_inode_flag(inode, FI_OPU_WRITE);
if (f2fs_should_update_inplace(inode, NULL)) {
err = -EINVAL;
goto out;
}
/* writeback all dirty pages in the range */
err = filemap_write_and_wait_range(inode->i_mapping, range->start,
range->start + range->len - 1);
if (err)
goto out;
/*
* lookup mapping info in extent cache, skip defragmenting if physical
* block addresses are continuous.
*/
if (f2fs_lookup_extent_cache(inode, pg_start, &ei)) {
if (ei.fofs + ei.len >= pg_end)
goto out;
}
map.m_lblk = pg_start;
map.m_next_pgofs = &next_pgofs;
/*
* lookup mapping info in dnode page cache, skip defragmenting if all
* physical block addresses are continuous even if there are hole(s)
* in logical blocks.
*/
while (map.m_lblk < pg_end) {
map.m_len = pg_end - map.m_lblk;
err = f2fs_map_blocks(inode, &map, 0, F2FS_GET_BLOCK_DEFAULT);
if (err)
goto out;
if (!(map.m_flags & F2FS_MAP_FLAGS)) {
map.m_lblk = next_pgofs;
continue;
}
if (blk_end && blk_end != map.m_pblk)
fragmented = true;
/* record total count of block that we're going to move */
total += map.m_len;
blk_end = map.m_pblk + map.m_len;
map.m_lblk += map.m_len;
}
if (!fragmented) {
total = 0;
goto out;
}
sec_num = DIV_ROUND_UP(total, BLKS_PER_SEC(sbi));
/*
* make sure there are enough free section for LFS allocation, this can
* avoid defragment running in SSR mode when free section are allocated
* intensively
*/
if (has_not_enough_free_secs(sbi, 0, sec_num)) {
err = -EAGAIN;
goto out;
}
map.m_lblk = pg_start;
map.m_len = pg_end - pg_start;
total = 0;
while (map.m_lblk < pg_end) {
pgoff_t idx;
int cnt = 0;
do_map:
map.m_len = pg_end - map.m_lblk;
err = f2fs_map_blocks(inode, &map, 0, F2FS_GET_BLOCK_DEFAULT);
if (err)
goto clear_out;
if (!(map.m_flags & F2FS_MAP_FLAGS)) {
map.m_lblk = next_pgofs;
goto check;
}
set_inode_flag(inode, FI_SKIP_WRITES);
idx = map.m_lblk;
while (idx < map.m_lblk + map.m_len && cnt < blk_per_seg) {
struct page *page;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
page = f2fs_get_lock_data_page(inode, idx, true);
if (IS_ERR(page)) {
err = PTR_ERR(page);
goto clear_out;
}
set_page_dirty(page);
f2fs_put_page(page, 1);
idx++;
cnt++;
total++;
}
map.m_lblk = idx;
check:
if (map.m_lblk < pg_end && cnt < blk_per_seg)
goto do_map;
clear_inode_flag(inode, FI_SKIP_WRITES);
err = filemap_fdatawrite(inode->i_mapping);
if (err)
goto out;
}
clear_out:
clear_inode_flag(inode, FI_SKIP_WRITES);
out:
clear_inode_flag(inode, FI_OPU_WRITE);
inode_unlock(inode);
if (!err)
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
range->len = (u64)total << PAGE_SHIFT;
return err;
}
static int f2fs_ioc_defragment(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct f2fs_defragment range;
int err;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (!S_ISREG(inode->i_mode) || f2fs_is_atomic_file(inode))
return -EINVAL;
if (f2fs_readonly(sbi->sb))
return -EROFS;
if (copy_from_user(&range, (struct f2fs_defragment __user *)arg,
sizeof(range)))
return -EFAULT;
/* verify alignment of offset & size */
if (range.start & (F2FS_BLKSIZE - 1) || range.len & (F2FS_BLKSIZE - 1))
return -EINVAL;
if (unlikely((range.start + range.len) >> PAGE_SHIFT >
max_file_blocks(inode)))
return -EINVAL;
err = mnt_want_write_file(filp);
if (err)
return err;
err = f2fs_defragment_range(sbi, filp, &range);
mnt_drop_write_file(filp);
f2fs_update_time(sbi, REQ_TIME);
if (err < 0)
return err;
if (copy_to_user((struct f2fs_defragment __user *)arg, &range,
sizeof(range)))
return -EFAULT;
return 0;
}
static int f2fs_move_file_range(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out, size_t len)
{
struct inode *src = file_inode(file_in);
struct inode *dst = file_inode(file_out);
struct f2fs_sb_info *sbi = F2FS_I_SB(src);
size_t olen = len, dst_max_i_size = 0;
size_t dst_osize;
int ret;
if (file_in->f_path.mnt != file_out->f_path.mnt ||
src->i_sb != dst->i_sb)
return -EXDEV;
if (unlikely(f2fs_readonly(src->i_sb)))
return -EROFS;
if (!S_ISREG(src->i_mode) || !S_ISREG(dst->i_mode))
return -EINVAL;
if (IS_ENCRYPTED(src) || IS_ENCRYPTED(dst))
return -EOPNOTSUPP;
if (pos_out < 0 || pos_in < 0)
return -EINVAL;
if (src == dst) {
if (pos_in == pos_out)
return 0;
if (pos_out > pos_in && pos_out < pos_in + len)
return -EINVAL;
}
inode_lock(src);
if (src != dst) {
ret = -EBUSY;
if (!inode_trylock(dst))
goto out;
}
ret = -EINVAL;
if (pos_in + len > src->i_size || pos_in + len < pos_in)
goto out_unlock;
if (len == 0)
olen = len = src->i_size - pos_in;
if (pos_in + len == src->i_size)
len = ALIGN(src->i_size, F2FS_BLKSIZE) - pos_in;
if (len == 0) {
ret = 0;
goto out_unlock;
}
dst_osize = dst->i_size;
if (pos_out + olen > dst->i_size)
dst_max_i_size = pos_out + olen;
/* verify the end result is block aligned */
if (!IS_ALIGNED(pos_in, F2FS_BLKSIZE) ||
!IS_ALIGNED(pos_in + len, F2FS_BLKSIZE) ||
!IS_ALIGNED(pos_out, F2FS_BLKSIZE))
goto out_unlock;
ret = f2fs_convert_inline_inode(src);
if (ret)
goto out_unlock;
ret = f2fs_convert_inline_inode(dst);
if (ret)
goto out_unlock;
/* write out all dirty pages from offset */
ret = filemap_write_and_wait_range(src->i_mapping,
pos_in, pos_in + len);
if (ret)
goto out_unlock;
ret = filemap_write_and_wait_range(dst->i_mapping,
pos_out, pos_out + len);
if (ret)
goto out_unlock;
f2fs_balance_fs(sbi, true);
f2fs_down_write(&F2FS_I(src)->i_gc_rwsem[WRITE]);
if (src != dst) {
ret = -EBUSY;
if (!f2fs_down_write_trylock(&F2FS_I(dst)->i_gc_rwsem[WRITE]))
goto out_src;
}
f2fs_lock_op(sbi);
ret = __exchange_data_block(src, dst, pos_in >> F2FS_BLKSIZE_BITS,
pos_out >> F2FS_BLKSIZE_BITS,
len >> F2FS_BLKSIZE_BITS, false);
if (!ret) {
if (dst_max_i_size)
f2fs_i_size_write(dst, dst_max_i_size);
else if (dst_osize != dst->i_size)
f2fs_i_size_write(dst, dst_osize);
}
f2fs_unlock_op(sbi);
if (src != dst)
f2fs_up_write(&F2FS_I(dst)->i_gc_rwsem[WRITE]);
out_src:
f2fs_up_write(&F2FS_I(src)->i_gc_rwsem[WRITE]);
out_unlock:
if (src != dst)
inode_unlock(dst);
out:
inode_unlock(src);
return ret;
}
static int __f2fs_ioc_move_range(struct file *filp,
struct f2fs_move_range *range)
{
struct fd dst;
int err;
if (!(filp->f_mode & FMODE_READ) ||
!(filp->f_mode & FMODE_WRITE))
return -EBADF;
dst = fdget(range->dst_fd);
if (!dst.file)
return -EBADF;
if (!(dst.file->f_mode & FMODE_WRITE)) {
err = -EBADF;
goto err_out;
}
err = mnt_want_write_file(filp);
if (err)
goto err_out;
err = f2fs_move_file_range(filp, range->pos_in, dst.file,
range->pos_out, range->len);
mnt_drop_write_file(filp);
err_out:
fdput(dst);
return err;
}
static int f2fs_ioc_move_range(struct file *filp, unsigned long arg)
{
struct f2fs_move_range range;
if (copy_from_user(&range, (struct f2fs_move_range __user *)arg,
sizeof(range)))
return -EFAULT;
return __f2fs_ioc_move_range(filp, &range);
}
static int f2fs_ioc_flush_device(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct sit_info *sm = SIT_I(sbi);
unsigned int start_segno = 0, end_segno = 0;
unsigned int dev_start_segno = 0, dev_end_segno = 0;
struct f2fs_flush_device range;
int ret;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (f2fs_readonly(sbi->sb))
return -EROFS;
if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED)))
return -EINVAL;
if (copy_from_user(&range, (struct f2fs_flush_device __user *)arg,
sizeof(range)))
return -EFAULT;
if (!f2fs_is_multi_device(sbi) || sbi->s_ndevs - 1 <= range.dev_num ||
__is_large_section(sbi)) {
f2fs_warn(sbi, "Can't flush %u in %d for segs_per_sec %u != 1",
range.dev_num, sbi->s_ndevs, sbi->segs_per_sec);
return -EINVAL;
}
ret = mnt_want_write_file(filp);
if (ret)
return ret;
if (range.dev_num != 0)
dev_start_segno = GET_SEGNO(sbi, FDEV(range.dev_num).start_blk);
dev_end_segno = GET_SEGNO(sbi, FDEV(range.dev_num).end_blk);
start_segno = sm->last_victim[FLUSH_DEVICE];
if (start_segno < dev_start_segno || start_segno >= dev_end_segno)
start_segno = dev_start_segno;
end_segno = min(start_segno + range.segments, dev_end_segno);
while (start_segno < end_segno) {
if (!f2fs_down_write_trylock(&sbi->gc_lock)) {
ret = -EBUSY;
goto out;
}
sm->last_victim[GC_CB] = end_segno + 1;
sm->last_victim[GC_GREEDY] = end_segno + 1;
sm->last_victim[ALLOC_NEXT] = end_segno + 1;
ret = f2fs_gc(sbi, true, true, true, start_segno);
if (ret == -EAGAIN)
ret = 0;
else if (ret < 0)
break;
start_segno++;
}
out:
mnt_drop_write_file(filp);
return ret;
}
static int f2fs_ioc_get_features(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
u32 sb_feature = le32_to_cpu(F2FS_I_SB(inode)->raw_super->feature);
/* Must validate to set it with SQLite behavior in Android. */
sb_feature |= F2FS_FEATURE_ATOMIC_WRITE;
return put_user(sb_feature, (u32 __user *)arg);
}
#ifdef CONFIG_QUOTA
int f2fs_transfer_project_quota(struct inode *inode, kprojid_t kprojid)
{
struct dquot *transfer_to[MAXQUOTAS] = {};
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct super_block *sb = sbi->sb;
int err = 0;
transfer_to[PRJQUOTA] = dqget(sb, make_kqid_projid(kprojid));
if (!IS_ERR(transfer_to[PRJQUOTA])) {
err = __dquot_transfer(inode, transfer_to);
if (err)
set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR);
dqput(transfer_to[PRJQUOTA]);
}
return err;
}
static int f2fs_ioc_setproject(struct inode *inode, __u32 projid)
{
struct f2fs_inode_info *fi = F2FS_I(inode);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct f2fs_inode *ri = NULL;
kprojid_t kprojid;
int err;
if (!f2fs_sb_has_project_quota(sbi)) {
if (projid != F2FS_DEF_PROJID)
return -EOPNOTSUPP;
else
return 0;
}
if (!f2fs_has_extra_attr(inode))
return -EOPNOTSUPP;
kprojid = make_kprojid(&init_user_ns, (projid_t)projid);
if (projid_eq(kprojid, F2FS_I(inode)->i_projid))
return 0;
err = -EPERM;
/* Is it quota file? Do not allow user to mess with it */
if (IS_NOQUOTA(inode))
return err;
if (!F2FS_FITS_IN_INODE(ri, fi->i_extra_isize, i_projid))
return -EOVERFLOW;
err = f2fs_dquot_initialize(inode);
if (err)
return err;
f2fs_lock_op(sbi);
err = f2fs_transfer_project_quota(inode, kprojid);
if (err)
goto out_unlock;
F2FS_I(inode)->i_projid = kprojid;
inode->i_ctime = current_time(inode);
f2fs_mark_inode_dirty_sync(inode, true);
out_unlock:
f2fs_unlock_op(sbi);
return err;
}
#else
int f2fs_transfer_project_quota(struct inode *inode, kprojid_t kprojid)
{
return 0;
}
static int f2fs_ioc_setproject(struct inode *inode, __u32 projid)
{
if (projid != F2FS_DEF_PROJID)
return -EOPNOTSUPP;
return 0;
}
#endif
int f2fs_fileattr_get(struct dentry *dentry, struct fileattr *fa)
{
struct inode *inode = d_inode(dentry);
struct f2fs_inode_info *fi = F2FS_I(inode);
u32 fsflags = f2fs_iflags_to_fsflags(fi->i_flags);
if (IS_ENCRYPTED(inode))
fsflags |= FS_ENCRYPT_FL;
if (IS_VERITY(inode))
fsflags |= FS_VERITY_FL;
if (f2fs_has_inline_data(inode) || f2fs_has_inline_dentry(inode))
fsflags |= FS_INLINE_DATA_FL;
if (is_inode_flag_set(inode, FI_PIN_FILE))
fsflags |= FS_NOCOW_FL;
fileattr_fill_flags(fa, fsflags & F2FS_GETTABLE_FS_FL);
if (f2fs_sb_has_project_quota(F2FS_I_SB(inode)))
fa->fsx_projid = from_kprojid(&init_user_ns, fi->i_projid);
return 0;
}
int f2fs_fileattr_set(struct user_namespace *mnt_userns,
struct dentry *dentry, struct fileattr *fa)
{
struct inode *inode = d_inode(dentry);
u32 fsflags = fa->flags, mask = F2FS_SETTABLE_FS_FL;
u32 iflags;
int err;
if (unlikely(f2fs_cp_error(F2FS_I_SB(inode))))
return -EIO;
if (!f2fs_is_checkpoint_ready(F2FS_I_SB(inode)))
return -ENOSPC;
if (fsflags & ~F2FS_GETTABLE_FS_FL)
return -EOPNOTSUPP;
fsflags &= F2FS_SETTABLE_FS_FL;
if (!fa->flags_valid)
mask &= FS_COMMON_FL;
iflags = f2fs_fsflags_to_iflags(fsflags);
if (f2fs_mask_flags(inode->i_mode, iflags) != iflags)
return -EOPNOTSUPP;
err = f2fs_setflags_common(inode, iflags, f2fs_fsflags_to_iflags(mask));
if (!err)
err = f2fs_ioc_setproject(inode, fa->fsx_projid);
return err;
}
int f2fs_pin_file_control(struct inode *inode, bool inc)
{
struct f2fs_inode_info *fi = F2FS_I(inode);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
/* Use i_gc_failures for normal file as a risk signal. */
if (inc)
f2fs_i_gc_failures_write(inode,
fi->i_gc_failures[GC_FAILURE_PIN] + 1);
if (fi->i_gc_failures[GC_FAILURE_PIN] > sbi->gc_pin_file_threshold) {
f2fs_warn(sbi, "%s: Enable GC = ino %lx after %x GC trials",
__func__, inode->i_ino,
fi->i_gc_failures[GC_FAILURE_PIN]);
clear_inode_flag(inode, FI_PIN_FILE);
return -EAGAIN;
}
return 0;
}
static int f2fs_ioc_set_pin_file(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
__u32 pin;
int ret = 0;
if (get_user(pin, (__u32 __user *)arg))
return -EFAULT;
if (!S_ISREG(inode->i_mode))
return -EINVAL;
if (f2fs_readonly(F2FS_I_SB(inode)->sb))
return -EROFS;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
inode_lock(inode);
if (!pin) {
clear_inode_flag(inode, FI_PIN_FILE);
f2fs_i_gc_failures_write(inode, 0);
goto done;
}
if (f2fs_should_update_outplace(inode, NULL)) {
ret = -EINVAL;
goto out;
}
if (f2fs_pin_file_control(inode, false)) {
ret = -EAGAIN;
goto out;
}
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
ret = f2fs_convert_inline_inode(inode);
if (ret)
goto out;
if (!f2fs_disable_compressed_file(inode)) {
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
ret = -EOPNOTSUPP;
goto out;
}
set_inode_flag(inode, FI_PIN_FILE);
ret = F2FS_I(inode)->i_gc_failures[GC_FAILURE_PIN];
done:
f2fs_update_time(F2FS_I_SB(inode), REQ_TIME);
out:
inode_unlock(inode);
mnt_drop_write_file(filp);
return ret;
}
static int f2fs_ioc_get_pin_file(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
__u32 pin = 0;
if (is_inode_flag_set(inode, FI_PIN_FILE))
pin = F2FS_I(inode)->i_gc_failures[GC_FAILURE_PIN];
return put_user(pin, (u32 __user *)arg);
}
int f2fs_precache_extents(struct inode *inode)
{
struct f2fs_inode_info *fi = F2FS_I(inode);
struct f2fs_map_blocks map;
pgoff_t m_next_extent;
loff_t end;
int err;
if (is_inode_flag_set(inode, FI_NO_EXTENT))
return -EOPNOTSUPP;
map.m_lblk = 0;
map.m_next_pgofs = NULL;
map.m_next_extent = &m_next_extent;
map.m_seg_type = NO_CHECK_TYPE;
map.m_may_create = false;
end = max_file_blocks(inode);
while (map.m_lblk < end) {
map.m_len = end - map.m_lblk;
f2fs_down_write(&fi->i_gc_rwsem[WRITE]);
err = f2fs_map_blocks(inode, &map, 0, F2FS_GET_BLOCK_PRECACHE);
f2fs_up_write(&fi->i_gc_rwsem[WRITE]);
if (err)
return err;
map.m_lblk = m_next_extent;
}
return 0;
}
static int f2fs_ioc_precache_extents(struct file *filp, unsigned long arg)
{
return f2fs_precache_extents(file_inode(filp));
}
f2fs: ioctl for removing a range from F2FS This ioctl shrinks a given length (aligned to sections) from end of the main area. Any cursegs and valid blocks will be moved out before invalidating the range. This feature can be used for adjusting partition sizes online. History of the patch: Sahitya Tummala: - Add this ioctl for f2fs_compat_ioctl() as well. - Fix debugfs status to reflect the online resize changes. - Fix potential race between online resize path and allocate new data block path or gc path. Others: - Rename some identifiers. - Add some error handling branches. - Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range. - Implement this interface as ext4's, and change the parameter from shrunk bytes to new block count of F2FS. - During resizing, force to empty sit_journal and forbid adding new entries to it, in order to avoid invalid segno in journal after resize. - Reduce sbi->user_block_count before resize starts. - Commit the updated superblock first, and then update in-memory metadata only when the former succeeds. - Target block count must align to sections. - Write checkpoint before and after committing the new superblock, w/o CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if resize fails after the new superblock is committed. - In free_segment_range(), reduce granularity of gc_mutex. - Add protection on curseg migration. - Add freeze_bdev() and thaw_bdev() for resize fs. - Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation. - Recover super_block and FS metadata when resize fails. - No need to clear CP_FSCK_FLAG in update_ckpt_flags(). - Clean up the sb and fs metadata update functions for resize_fs. Geert Uytterhoeven: - Use div_u64*() for 64-bit divisions Arnd Bergmann: - Not all architectures support get_user() with a 64-bit argument: ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined! Use copy_from_user() here, this will always work. Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-05 11:33:25 +08:00
static int f2fs_ioc_resize_fs(struct file *filp, unsigned long arg)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(file_inode(filp));
__u64 block_count;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (f2fs_readonly(sbi->sb))
return -EROFS;
if (copy_from_user(&block_count, (void __user *)arg,
sizeof(block_count)))
return -EFAULT;
return f2fs_resize_fs(sbi, block_count);
f2fs: ioctl for removing a range from F2FS This ioctl shrinks a given length (aligned to sections) from end of the main area. Any cursegs and valid blocks will be moved out before invalidating the range. This feature can be used for adjusting partition sizes online. History of the patch: Sahitya Tummala: - Add this ioctl for f2fs_compat_ioctl() as well. - Fix debugfs status to reflect the online resize changes. - Fix potential race between online resize path and allocate new data block path or gc path. Others: - Rename some identifiers. - Add some error handling branches. - Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range. - Implement this interface as ext4's, and change the parameter from shrunk bytes to new block count of F2FS. - During resizing, force to empty sit_journal and forbid adding new entries to it, in order to avoid invalid segno in journal after resize. - Reduce sbi->user_block_count before resize starts. - Commit the updated superblock first, and then update in-memory metadata only when the former succeeds. - Target block count must align to sections. - Write checkpoint before and after committing the new superblock, w/o CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if resize fails after the new superblock is committed. - In free_segment_range(), reduce granularity of gc_mutex. - Add protection on curseg migration. - Add freeze_bdev() and thaw_bdev() for resize fs. - Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation. - Recover super_block and FS metadata when resize fails. - No need to clear CP_FSCK_FLAG in update_ckpt_flags(). - Clean up the sb and fs metadata update functions for resize_fs. Geert Uytterhoeven: - Use div_u64*() for 64-bit divisions Arnd Bergmann: - Not all architectures support get_user() with a 64-bit argument: ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined! Use copy_from_user() here, this will always work. Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-05 11:33:25 +08:00
}
f2fs: add fs-verity support Add fs-verity support to f2fs. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. The f2fs support for fs-verity consists of: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->readpages() to verify data as it's read from verity files and to support reading verity metadata pages. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). Like ext4, f2fs stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by f2fs with only some relatively small changes to f2fs. Extended attributes cannot be used because (a) f2fs limits the total size of an inode's xattr entries to 4096 bytes, which wouldn't be enough for even a single Merkle tree block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity metadata *must* be encrypted when the file is because it contains hashes of the plaintext data. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
static int f2fs_ioc_enable_verity(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
f2fs_update_time(F2FS_I_SB(inode), REQ_TIME);
if (!f2fs_sb_has_verity(F2FS_I_SB(inode))) {
f2fs_warn(F2FS_I_SB(inode),
"Can't enable fs-verity on inode %lu: the verity feature is not enabled on this filesystem",
f2fs: add fs-verity support Add fs-verity support to f2fs. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. The f2fs support for fs-verity consists of: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->readpages() to verify data as it's read from verity files and to support reading verity metadata pages. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). Like ext4, f2fs stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by f2fs with only some relatively small changes to f2fs. Extended attributes cannot be used because (a) f2fs limits the total size of an inode's xattr entries to 4096 bytes, which wouldn't be enough for even a single Merkle tree block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity metadata *must* be encrypted when the file is because it contains hashes of the plaintext data. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
inode->i_ino);
return -EOPNOTSUPP;
}
return fsverity_ioctl_enable(filp, (const void __user *)arg);
}
static int f2fs_ioc_measure_verity(struct file *filp, unsigned long arg)
{
if (!f2fs_sb_has_verity(F2FS_I_SB(file_inode(filp))))
return -EOPNOTSUPP;
return fsverity_ioctl_measure(filp, (void __user *)arg);
}
fs-verity: add FS_IOC_READ_VERITY_METADATA ioctl Add an ioctl FS_IOC_READ_VERITY_METADATA which will allow reading verity metadata from a file that has fs-verity enabled, including: - The Merkle tree - The fsverity_descriptor (not including the signature if present) - The built-in signature, if present This ioctl has similar semantics to pread(). It is passed the type of metadata to read (one of the above three), and a buffer, offset, and size. It returns the number of bytes read or an error. Separate patches will add support for each of the above metadata types. This patch just adds the ioctl itself. This ioctl doesn't make any assumption about where the metadata is stored on-disk. It does assume the metadata is in a stable format, but that's basically already the case: - The Merkle tree and fsverity_descriptor are defined by how fs-verity file digests are computed; see the "File digest computation" section of Documentation/filesystems/fsverity.rst. Technically, the way in which the levels of the tree are ordered relative to each other wasn't previously specified, but it's logical to put the root level first. - The built-in signature is the value passed to FS_IOC_ENABLE_VERITY. This ioctl is useful because it allows writing a server program that takes a verity file and serves it to a client program, such that the client can do its own fs-verity compatible verification of the file. This only makes sense if the client doesn't trust the server and if the server needs to provide the storage for the client. More concretely, there is interest in using this ability in Android to export APK files (which are protected by fs-verity) to "protected VMs". This would use Protected KVM (https://lwn.net/Articles/836693), which provides an isolated execution environment without having to trust the traditional "host". A "guest" VM can boot from a signed image and perform specific tasks in a minimum trusted environment using files that have fs-verity enabled on the host, without trusting the host or requiring that the guest has its own trusted storage. Technically, it would be possible to duplicate the metadata and store it in separate files for serving. However, that would be less efficient and would require extra care in userspace to maintain file consistency. In addition to the above, the ability to read the built-in signatures is useful because it allows a system that is using the in-kernel signature verification to migrate to userspace signature verification. Link: https://lore.kernel.org/r/20210115181819.34732-4-ebiggers@kernel.org Reviewed-by: Victor Hsieh <victorhsieh@google.com> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2021-01-16 02:18:16 +08:00
static int f2fs_ioc_read_verity_metadata(struct file *filp, unsigned long arg)
{
if (!f2fs_sb_has_verity(F2FS_I_SB(file_inode(filp))))
return -EOPNOTSUPP;
return fsverity_ioctl_read_metadata(filp, (const void __user *)arg);
}
static int f2fs_ioc_getfslabel(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
char *vbuf;
int count;
int err = 0;
vbuf = f2fs_kzalloc(sbi, MAX_VOLUME_NAME, GFP_KERNEL);
if (!vbuf)
return -ENOMEM;
f2fs_down_read(&sbi->sb_lock);
count = utf16s_to_utf8s(sbi->raw_super->volume_name,
ARRAY_SIZE(sbi->raw_super->volume_name),
UTF16_LITTLE_ENDIAN, vbuf, MAX_VOLUME_NAME);
f2fs_up_read(&sbi->sb_lock);
if (copy_to_user((char __user *)arg, vbuf,
min(FSLABEL_MAX, count)))
err = -EFAULT;
kfree(vbuf);
return err;
}
static int f2fs_ioc_setfslabel(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
char *vbuf;
int err = 0;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
vbuf = strndup_user((const char __user *)arg, FSLABEL_MAX);
if (IS_ERR(vbuf))
return PTR_ERR(vbuf);
err = mnt_want_write_file(filp);
if (err)
goto out;
f2fs_down_write(&sbi->sb_lock);
memset(sbi->raw_super->volume_name, 0,
sizeof(sbi->raw_super->volume_name));
utf8s_to_utf16s(vbuf, strlen(vbuf), UTF16_LITTLE_ENDIAN,
sbi->raw_super->volume_name,
ARRAY_SIZE(sbi->raw_super->volume_name));
err = f2fs_commit_super(sbi, false);
f2fs_up_write(&sbi->sb_lock);
mnt_drop_write_file(filp);
out:
kfree(vbuf);
return err;
}
static int f2fs_get_compress_blocks(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
__u64 blocks;
if (!f2fs_sb_has_compression(F2FS_I_SB(inode)))
return -EOPNOTSUPP;
if (!f2fs_compressed_file(inode))
return -EINVAL;
blocks = atomic_read(&F2FS_I(inode)->i_compr_blocks);
return put_user(blocks, (u64 __user *)arg);
}
static int release_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
unsigned int released_blocks = 0;
int cluster_size = F2FS_I(dn->inode)->i_cluster_size;
block_t blkaddr;
int i;
for (i = 0; i < count; i++) {
blkaddr = data_blkaddr(dn->inode, dn->node_page,
dn->ofs_in_node + i);
if (!__is_valid_data_blkaddr(blkaddr))
continue;
if (unlikely(!f2fs_is_valid_blkaddr(sbi, blkaddr,
DATA_GENERIC_ENHANCE)))
return -EFSCORRUPTED;
}
while (count) {
int compr_blocks = 0;
for (i = 0; i < cluster_size; i++, dn->ofs_in_node++) {
blkaddr = f2fs_data_blkaddr(dn);
if (i == 0) {
if (blkaddr == COMPRESS_ADDR)
continue;
dn->ofs_in_node += cluster_size;
goto next;
}
if (__is_valid_data_blkaddr(blkaddr))
compr_blocks++;
if (blkaddr != NEW_ADDR)
continue;
dn->data_blkaddr = NULL_ADDR;
f2fs_set_data_blkaddr(dn);
}
f2fs_i_compr_blocks_update(dn->inode, compr_blocks, false);
dec_valid_block_count(sbi, dn->inode,
cluster_size - compr_blocks);
released_blocks += cluster_size - compr_blocks;
next:
count -= cluster_size;
}
return released_blocks;
}
static int f2fs_release_compress_blocks(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
pgoff_t page_idx = 0, last_idx;
unsigned int released_blocks = 0;
int ret;
int writecount;
if (!f2fs_sb_has_compression(F2FS_I_SB(inode)))
return -EOPNOTSUPP;
if (!f2fs_compressed_file(inode))
return -EINVAL;
if (f2fs_readonly(sbi->sb))
return -EROFS;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
f2fs_balance_fs(F2FS_I_SB(inode), true);
inode_lock(inode);
writecount = atomic_read(&inode->i_writecount);
if ((filp->f_mode & FMODE_WRITE && writecount != 1) ||
(!(filp->f_mode & FMODE_WRITE) && writecount)) {
ret = -EBUSY;
goto out;
}
if (is_inode_flag_set(inode, FI_COMPRESS_RELEASED)) {
ret = -EINVAL;
goto out;
}
ret = filemap_write_and_wait_range(inode->i_mapping, 0, LLONG_MAX);
if (ret)
goto out;
set_inode_flag(inode, FI_COMPRESS_RELEASED);
inode->i_ctime = current_time(inode);
f2fs_mark_inode_dirty_sync(inode, true);
if (!atomic_read(&F2FS_I(inode)->i_compr_blocks))
goto out;
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
filemap_invalidate_lock(inode->i_mapping);
last_idx = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
while (page_idx < last_idx) {
struct dnode_of_data dn;
pgoff_t end_offset, count;
set_new_dnode(&dn, inode, NULL, NULL, 0);
ret = f2fs_get_dnode_of_data(&dn, page_idx, LOOKUP_NODE);
if (ret) {
if (ret == -ENOENT) {
page_idx = f2fs_get_next_page_offset(&dn,
page_idx);
ret = 0;
continue;
}
break;
}
end_offset = ADDRS_PER_PAGE(dn.node_page, inode);
count = min(end_offset - dn.ofs_in_node, last_idx - page_idx);
count = round_up(count, F2FS_I(inode)->i_cluster_size);
ret = release_compress_blocks(&dn, count);
f2fs_put_dnode(&dn);
if (ret < 0)
break;
page_idx += count;
released_blocks += ret;
}
filemap_invalidate_unlock(inode->i_mapping);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
out:
inode_unlock(inode);
mnt_drop_write_file(filp);
if (ret >= 0) {
ret = put_user(released_blocks, (u64 __user *)arg);
} else if (released_blocks &&
atomic_read(&F2FS_I(inode)->i_compr_blocks)) {
set_sbi_flag(sbi, SBI_NEED_FSCK);
f2fs_warn(sbi, "%s: partial blocks were released i_ino=%lx "
"iblocks=%llu, released=%u, compr_blocks=%u, "
"run fsck to fix.",
__func__, inode->i_ino, inode->i_blocks,
released_blocks,
atomic_read(&F2FS_I(inode)->i_compr_blocks));
}
return ret;
}
static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
unsigned int reserved_blocks = 0;
int cluster_size = F2FS_I(dn->inode)->i_cluster_size;
block_t blkaddr;
int i;
for (i = 0; i < count; i++) {
blkaddr = data_blkaddr(dn->inode, dn->node_page,
dn->ofs_in_node + i);
if (!__is_valid_data_blkaddr(blkaddr))
continue;
if (unlikely(!f2fs_is_valid_blkaddr(sbi, blkaddr,
DATA_GENERIC_ENHANCE)))
return -EFSCORRUPTED;
}
while (count) {
int compr_blocks = 0;
blkcnt_t reserved;
int ret;
for (i = 0; i < cluster_size; i++, dn->ofs_in_node++) {
blkaddr = f2fs_data_blkaddr(dn);
if (i == 0) {
if (blkaddr == COMPRESS_ADDR)
continue;
dn->ofs_in_node += cluster_size;
goto next;
}
if (__is_valid_data_blkaddr(blkaddr)) {
compr_blocks++;
continue;
}
dn->data_blkaddr = NEW_ADDR;
f2fs_set_data_blkaddr(dn);
}
reserved = cluster_size - compr_blocks;
ret = inc_valid_block_count(sbi, dn->inode, &reserved);
if (ret)
return ret;
if (reserved != cluster_size - compr_blocks)
return -ENOSPC;
f2fs_i_compr_blocks_update(dn->inode, compr_blocks, true);
reserved_blocks += reserved;
next:
count -= cluster_size;
}
return reserved_blocks;
}
static int f2fs_reserve_compress_blocks(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
pgoff_t page_idx = 0, last_idx;
unsigned int reserved_blocks = 0;
int ret;
if (!f2fs_sb_has_compression(F2FS_I_SB(inode)))
return -EOPNOTSUPP;
if (!f2fs_compressed_file(inode))
return -EINVAL;
if (f2fs_readonly(sbi->sb))
return -EROFS;
ret = mnt_want_write_file(filp);
if (ret)
return ret;
if (atomic_read(&F2FS_I(inode)->i_compr_blocks))
goto out;
f2fs_balance_fs(F2FS_I_SB(inode), true);
inode_lock(inode);
if (!is_inode_flag_set(inode, FI_COMPRESS_RELEASED)) {
ret = -EINVAL;
goto unlock_inode;
}
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
filemap_invalidate_lock(inode->i_mapping);
last_idx = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
while (page_idx < last_idx) {
struct dnode_of_data dn;
pgoff_t end_offset, count;
set_new_dnode(&dn, inode, NULL, NULL, 0);
ret = f2fs_get_dnode_of_data(&dn, page_idx, LOOKUP_NODE);
if (ret) {
if (ret == -ENOENT) {
page_idx = f2fs_get_next_page_offset(&dn,
page_idx);
ret = 0;
continue;
}
break;
}
end_offset = ADDRS_PER_PAGE(dn.node_page, inode);
count = min(end_offset - dn.ofs_in_node, last_idx - page_idx);
count = round_up(count, F2FS_I(inode)->i_cluster_size);
ret = reserve_compress_blocks(&dn, count);
f2fs_put_dnode(&dn);
if (ret < 0)
break;
page_idx += count;
reserved_blocks += ret;
}
filemap_invalidate_unlock(inode->i_mapping);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
if (ret >= 0) {
clear_inode_flag(inode, FI_COMPRESS_RELEASED);
inode->i_ctime = current_time(inode);
f2fs_mark_inode_dirty_sync(inode, true);
}
unlock_inode:
inode_unlock(inode);
out:
mnt_drop_write_file(filp);
if (ret >= 0) {
ret = put_user(reserved_blocks, (u64 __user *)arg);
} else if (reserved_blocks &&
atomic_read(&F2FS_I(inode)->i_compr_blocks)) {
set_sbi_flag(sbi, SBI_NEED_FSCK);
f2fs_warn(sbi, "%s: partial blocks were released i_ino=%lx "
"iblocks=%llu, reserved=%u, compr_blocks=%u, "
"run fsck to fix.",
__func__, inode->i_ino, inode->i_blocks,
reserved_blocks,
atomic_read(&F2FS_I(inode)->i_compr_blocks));
}
return ret;
}
static int f2fs_secure_erase(struct block_device *bdev, struct inode *inode,
pgoff_t off, block_t block, block_t len, u32 flags)
{
struct request_queue *q = bdev_get_queue(bdev);
sector_t sector = SECTOR_FROM_BLOCK(block);
sector_t nr_sects = SECTOR_FROM_BLOCK(len);
int ret = 0;
if (!q)
return -ENXIO;
if (flags & F2FS_TRIM_FILE_DISCARD)
ret = blkdev_issue_discard(bdev, sector, nr_sects, GFP_NOFS,
blk_queue_secure_erase(q) ?
BLKDEV_DISCARD_SECURE : 0);
if (!ret && (flags & F2FS_TRIM_FILE_ZEROOUT)) {
if (IS_ENCRYPTED(inode))
ret = fscrypt_zeroout_range(inode, off, block, len);
else
ret = blkdev_issue_zeroout(bdev, sector, nr_sects,
GFP_NOFS, 0);
}
return ret;
}
static int f2fs_sec_trim_file(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct address_space *mapping = inode->i_mapping;
struct block_device *prev_bdev = NULL;
struct f2fs_sectrim_range range;
pgoff_t index, pg_end, prev_index = 0;
block_t prev_block = 0, len = 0;
loff_t end_addr;
bool to_end = false;
int ret = 0;
if (!(filp->f_mode & FMODE_WRITE))
return -EBADF;
if (copy_from_user(&range, (struct f2fs_sectrim_range __user *)arg,
sizeof(range)))
return -EFAULT;
if (range.flags == 0 || (range.flags & ~F2FS_TRIM_FILE_MASK) ||
!S_ISREG(inode->i_mode))
return -EINVAL;
if (((range.flags & F2FS_TRIM_FILE_DISCARD) &&
!f2fs_hw_support_discard(sbi)) ||
((range.flags & F2FS_TRIM_FILE_ZEROOUT) &&
IS_ENCRYPTED(inode) && f2fs_is_multi_device(sbi)))
return -EOPNOTSUPP;
file_start_write(filp);
inode_lock(inode);
if (f2fs_is_atomic_file(inode) || f2fs_compressed_file(inode) ||
range.start >= inode->i_size) {
ret = -EINVAL;
goto err;
}
if (range.len == 0)
goto err;
if (inode->i_size - range.start > range.len) {
end_addr = range.start + range.len;
} else {
end_addr = range.len == (u64)-1 ?
sbi->sb->s_maxbytes : inode->i_size;
to_end = true;
}
if (!IS_ALIGNED(range.start, F2FS_BLKSIZE) ||
(!to_end && !IS_ALIGNED(end_addr, F2FS_BLKSIZE))) {
ret = -EINVAL;
goto err;
}
index = F2FS_BYTES_TO_BLK(range.start);
pg_end = DIV_ROUND_UP(end_addr, F2FS_BLKSIZE);
ret = f2fs_convert_inline_inode(inode);
if (ret)
goto err;
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
filemap_invalidate_lock(mapping);
ret = filemap_write_and_wait_range(mapping, range.start,
to_end ? LLONG_MAX : end_addr - 1);
if (ret)
goto out;
truncate_inode_pages_range(mapping, range.start,
to_end ? -1 : end_addr - 1);
while (index < pg_end) {
struct dnode_of_data dn;
pgoff_t end_offset, count;
int i;
set_new_dnode(&dn, inode, NULL, NULL, 0);
ret = f2fs_get_dnode_of_data(&dn, index, LOOKUP_NODE);
if (ret) {
if (ret == -ENOENT) {
index = f2fs_get_next_page_offset(&dn, index);
continue;
}
goto out;
}
end_offset = ADDRS_PER_PAGE(dn.node_page, inode);
count = min(end_offset - dn.ofs_in_node, pg_end - index);
for (i = 0; i < count; i++, index++, dn.ofs_in_node++) {
struct block_device *cur_bdev;
block_t blkaddr = f2fs_data_blkaddr(&dn);
if (!__is_valid_data_blkaddr(blkaddr))
continue;
if (!f2fs_is_valid_blkaddr(sbi, blkaddr,
DATA_GENERIC_ENHANCE)) {
ret = -EFSCORRUPTED;
f2fs_put_dnode(&dn);
goto out;
}
cur_bdev = f2fs_target_device(sbi, blkaddr, NULL);
if (f2fs_is_multi_device(sbi)) {
int di = f2fs_target_device_index(sbi, blkaddr);
blkaddr -= FDEV(di).start_blk;
}
if (len) {
if (prev_bdev == cur_bdev &&
index == prev_index + len &&
blkaddr == prev_block + len) {
len++;
} else {
ret = f2fs_secure_erase(prev_bdev,
inode, prev_index, prev_block,
len, range.flags);
if (ret) {
f2fs_put_dnode(&dn);
goto out;
}
len = 0;
}
}
if (!len) {
prev_bdev = cur_bdev;
prev_index = index;
prev_block = blkaddr;
len = 1;
}
}
f2fs_put_dnode(&dn);
if (fatal_signal_pending(current)) {
ret = -EINTR;
goto out;
}
cond_resched();
}
if (len)
ret = f2fs_secure_erase(prev_bdev, inode, prev_index,
prev_block, len, range.flags);
out:
filemap_invalidate_unlock(mapping);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
err:
inode_unlock(inode);
file_end_write(filp);
return ret;
}
static int f2fs_ioc_get_compress_option(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_comp_option option;
if (!f2fs_sb_has_compression(F2FS_I_SB(inode)))
return -EOPNOTSUPP;
inode_lock_shared(inode);
if (!f2fs_compressed_file(inode)) {
inode_unlock_shared(inode);
return -ENODATA;
}
option.algorithm = F2FS_I(inode)->i_compress_algorithm;
option.log_cluster_size = F2FS_I(inode)->i_log_cluster_size;
inode_unlock_shared(inode);
if (copy_to_user((struct f2fs_comp_option __user *)arg, &option,
sizeof(option)))
return -EFAULT;
return 0;
}
static int f2fs_ioc_set_compress_option(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct f2fs_comp_option option;
int ret = 0;
if (!f2fs_sb_has_compression(sbi))
return -EOPNOTSUPP;
if (!(filp->f_mode & FMODE_WRITE))
return -EBADF;
if (copy_from_user(&option, (struct f2fs_comp_option __user *)arg,
sizeof(option)))
return -EFAULT;
if (!f2fs_compressed_file(inode) ||
option.log_cluster_size < MIN_COMPRESS_LOG_SIZE ||
option.log_cluster_size > MAX_COMPRESS_LOG_SIZE ||
option.algorithm >= COMPRESS_MAX)
return -EINVAL;
file_start_write(filp);
inode_lock(inode);
if (f2fs_is_mmap_file(inode) || get_dirty_pages(inode)) {
ret = -EBUSY;
goto out;
}
if (inode->i_size != 0) {
ret = -EFBIG;
goto out;
}
F2FS_I(inode)->i_compress_algorithm = option.algorithm;
F2FS_I(inode)->i_log_cluster_size = option.log_cluster_size;
F2FS_I(inode)->i_cluster_size = 1 << option.log_cluster_size;
f2fs_mark_inode_dirty_sync(inode, true);
if (!f2fs_is_compress_backend_ready(inode))
f2fs_warn(sbi, "compression algorithm is successfully set, "
"but current kernel doesn't support this algorithm.");
out:
inode_unlock(inode);
file_end_write(filp);
return ret;
}
static int redirty_blocks(struct inode *inode, pgoff_t page_idx, int len)
{
DEFINE_READAHEAD(ractl, NULL, NULL, inode->i_mapping, page_idx);
struct address_space *mapping = inode->i_mapping;
struct page *page;
pgoff_t redirty_idx = page_idx;
int i, page_len = 0, ret = 0;
page_cache_ra_unbounded(&ractl, len, 0);
for (i = 0; i < len; i++, page_idx++) {
page = read_cache_page(mapping, page_idx, NULL, NULL);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
break;
}
page_len++;
}
for (i = 0; i < page_len; i++, redirty_idx++) {
page = find_lock_page(mapping, redirty_idx);
if (!page) {
ret = -ENOMEM;
break;
}
set_page_dirty(page);
f2fs_put_page(page, 1);
f2fs_put_page(page, 0);
}
return ret;
}
static int f2fs_ioc_decompress_file(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct f2fs_inode_info *fi = F2FS_I(inode);
pgoff_t page_idx = 0, last_idx;
unsigned int blk_per_seg = sbi->blocks_per_seg;
int cluster_size = F2FS_I(inode)->i_cluster_size;
int count, ret;
if (!f2fs_sb_has_compression(sbi) ||
F2FS_OPTION(sbi).compress_mode != COMPR_MODE_USER)
return -EOPNOTSUPP;
if (!(filp->f_mode & FMODE_WRITE))
return -EBADF;
if (!f2fs_compressed_file(inode))
return -EINVAL;
f2fs_balance_fs(F2FS_I_SB(inode), true);
file_start_write(filp);
inode_lock(inode);
if (!f2fs_is_compress_backend_ready(inode)) {
ret = -EOPNOTSUPP;
goto out;
}
if (f2fs_is_mmap_file(inode)) {
ret = -EBUSY;
goto out;
}
ret = filemap_write_and_wait_range(inode->i_mapping, 0, LLONG_MAX);
if (ret)
goto out;
if (!atomic_read(&fi->i_compr_blocks))
goto out;
last_idx = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
count = last_idx - page_idx;
while (count) {
int len = min(cluster_size, count);
ret = redirty_blocks(inode, page_idx, len);
if (ret < 0)
break;
if (get_dirty_pages(inode) >= blk_per_seg)
filemap_fdatawrite(inode->i_mapping);
count -= len;
page_idx += len;
}
if (!ret)
ret = filemap_write_and_wait_range(inode->i_mapping, 0,
LLONG_MAX);
if (ret)
f2fs_warn(sbi, "%s: The file might be partially decompressed (errno=%d). Please delete the file.",
__func__, ret);
out:
inode_unlock(inode);
file_end_write(filp);
return ret;
}
static int f2fs_ioc_compress_file(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
pgoff_t page_idx = 0, last_idx;
unsigned int blk_per_seg = sbi->blocks_per_seg;
int cluster_size = F2FS_I(inode)->i_cluster_size;
int count, ret;
if (!f2fs_sb_has_compression(sbi) ||
F2FS_OPTION(sbi).compress_mode != COMPR_MODE_USER)
return -EOPNOTSUPP;
if (!(filp->f_mode & FMODE_WRITE))
return -EBADF;
if (!f2fs_compressed_file(inode))
return -EINVAL;
f2fs_balance_fs(F2FS_I_SB(inode), true);
file_start_write(filp);
inode_lock(inode);
if (!f2fs_is_compress_backend_ready(inode)) {
ret = -EOPNOTSUPP;
goto out;
}
if (f2fs_is_mmap_file(inode)) {
ret = -EBUSY;
goto out;
}
ret = filemap_write_and_wait_range(inode->i_mapping, 0, LLONG_MAX);
if (ret)
goto out;
set_inode_flag(inode, FI_ENABLE_COMPRESS);
last_idx = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
count = last_idx - page_idx;
while (count) {
int len = min(cluster_size, count);
ret = redirty_blocks(inode, page_idx, len);
if (ret < 0)
break;
if (get_dirty_pages(inode) >= blk_per_seg)
filemap_fdatawrite(inode->i_mapping);
count -= len;
page_idx += len;
}
if (!ret)
ret = filemap_write_and_wait_range(inode->i_mapping, 0,
LLONG_MAX);
clear_inode_flag(inode, FI_ENABLE_COMPRESS);
if (ret)
f2fs_warn(sbi, "%s: The file might be partially compressed (errno=%d). Please delete the file.",
__func__, ret);
out:
inode_unlock(inode);
file_end_write(filp);
return ret;
}
static long __f2fs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case FS_IOC_GETVERSION:
return f2fs_ioc_getversion(filp, arg);
case F2FS_IOC_START_ATOMIC_WRITE:
return f2fs_ioc_start_atomic_write(filp);
case F2FS_IOC_COMMIT_ATOMIC_WRITE:
return f2fs_ioc_commit_atomic_write(filp);
case F2FS_IOC_START_VOLATILE_WRITE:
return f2fs_ioc_start_volatile_write(filp);
case F2FS_IOC_RELEASE_VOLATILE_WRITE:
return f2fs_ioc_release_volatile_write(filp);
case F2FS_IOC_ABORT_VOLATILE_WRITE:
return f2fs_ioc_abort_volatile_write(filp);
case F2FS_IOC_SHUTDOWN:
return f2fs_ioc_shutdown(filp, arg);
case FITRIM:
return f2fs_ioc_fitrim(filp, arg);
case FS_IOC_SET_ENCRYPTION_POLICY:
return f2fs_ioc_set_encryption_policy(filp, arg);
case FS_IOC_GET_ENCRYPTION_POLICY:
return f2fs_ioc_get_encryption_policy(filp, arg);
case FS_IOC_GET_ENCRYPTION_PWSALT:
return f2fs_ioc_get_encryption_pwsalt(filp, arg);
case FS_IOC_GET_ENCRYPTION_POLICY_EX:
return f2fs_ioc_get_encryption_policy_ex(filp, arg);
case FS_IOC_ADD_ENCRYPTION_KEY:
return f2fs_ioc_add_encryption_key(filp, arg);
case FS_IOC_REMOVE_ENCRYPTION_KEY:
return f2fs_ioc_remove_encryption_key(filp, arg);
case FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS:
return f2fs_ioc_remove_encryption_key_all_users(filp, arg);
case FS_IOC_GET_ENCRYPTION_KEY_STATUS:
return f2fs_ioc_get_encryption_key_status(filp, arg);
case FS_IOC_GET_ENCRYPTION_NONCE:
return f2fs_ioc_get_encryption_nonce(filp, arg);
case F2FS_IOC_GARBAGE_COLLECT:
return f2fs_ioc_gc(filp, arg);
case F2FS_IOC_GARBAGE_COLLECT_RANGE:
return f2fs_ioc_gc_range(filp, arg);
case F2FS_IOC_WRITE_CHECKPOINT:
return f2fs_ioc_write_checkpoint(filp, arg);
case F2FS_IOC_DEFRAGMENT:
return f2fs_ioc_defragment(filp, arg);
case F2FS_IOC_MOVE_RANGE:
return f2fs_ioc_move_range(filp, arg);
case F2FS_IOC_FLUSH_DEVICE:
return f2fs_ioc_flush_device(filp, arg);
case F2FS_IOC_GET_FEATURES:
return f2fs_ioc_get_features(filp, arg);
case F2FS_IOC_GET_PIN_FILE:
return f2fs_ioc_get_pin_file(filp, arg);
case F2FS_IOC_SET_PIN_FILE:
return f2fs_ioc_set_pin_file(filp, arg);
case F2FS_IOC_PRECACHE_EXTENTS:
return f2fs_ioc_precache_extents(filp, arg);
f2fs: ioctl for removing a range from F2FS This ioctl shrinks a given length (aligned to sections) from end of the main area. Any cursegs and valid blocks will be moved out before invalidating the range. This feature can be used for adjusting partition sizes online. History of the patch: Sahitya Tummala: - Add this ioctl for f2fs_compat_ioctl() as well. - Fix debugfs status to reflect the online resize changes. - Fix potential race between online resize path and allocate new data block path or gc path. Others: - Rename some identifiers. - Add some error handling branches. - Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range. - Implement this interface as ext4's, and change the parameter from shrunk bytes to new block count of F2FS. - During resizing, force to empty sit_journal and forbid adding new entries to it, in order to avoid invalid segno in journal after resize. - Reduce sbi->user_block_count before resize starts. - Commit the updated superblock first, and then update in-memory metadata only when the former succeeds. - Target block count must align to sections. - Write checkpoint before and after committing the new superblock, w/o CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if resize fails after the new superblock is committed. - In free_segment_range(), reduce granularity of gc_mutex. - Add protection on curseg migration. - Add freeze_bdev() and thaw_bdev() for resize fs. - Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation. - Recover super_block and FS metadata when resize fails. - No need to clear CP_FSCK_FLAG in update_ckpt_flags(). - Clean up the sb and fs metadata update functions for resize_fs. Geert Uytterhoeven: - Use div_u64*() for 64-bit divisions Arnd Bergmann: - Not all architectures support get_user() with a 64-bit argument: ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined! Use copy_from_user() here, this will always work. Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-05 11:33:25 +08:00
case F2FS_IOC_RESIZE_FS:
return f2fs_ioc_resize_fs(filp, arg);
f2fs: add fs-verity support Add fs-verity support to f2fs. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. The f2fs support for fs-verity consists of: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->readpages() to verify data as it's read from verity files and to support reading verity metadata pages. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). Like ext4, f2fs stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by f2fs with only some relatively small changes to f2fs. Extended attributes cannot be used because (a) f2fs limits the total size of an inode's xattr entries to 4096 bytes, which wouldn't be enough for even a single Merkle tree block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity metadata *must* be encrypted when the file is because it contains hashes of the plaintext data. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
case FS_IOC_ENABLE_VERITY:
return f2fs_ioc_enable_verity(filp, arg);
case FS_IOC_MEASURE_VERITY:
return f2fs_ioc_measure_verity(filp, arg);
fs-verity: add FS_IOC_READ_VERITY_METADATA ioctl Add an ioctl FS_IOC_READ_VERITY_METADATA which will allow reading verity metadata from a file that has fs-verity enabled, including: - The Merkle tree - The fsverity_descriptor (not including the signature if present) - The built-in signature, if present This ioctl has similar semantics to pread(). It is passed the type of metadata to read (one of the above three), and a buffer, offset, and size. It returns the number of bytes read or an error. Separate patches will add support for each of the above metadata types. This patch just adds the ioctl itself. This ioctl doesn't make any assumption about where the metadata is stored on-disk. It does assume the metadata is in a stable format, but that's basically already the case: - The Merkle tree and fsverity_descriptor are defined by how fs-verity file digests are computed; see the "File digest computation" section of Documentation/filesystems/fsverity.rst. Technically, the way in which the levels of the tree are ordered relative to each other wasn't previously specified, but it's logical to put the root level first. - The built-in signature is the value passed to FS_IOC_ENABLE_VERITY. This ioctl is useful because it allows writing a server program that takes a verity file and serves it to a client program, such that the client can do its own fs-verity compatible verification of the file. This only makes sense if the client doesn't trust the server and if the server needs to provide the storage for the client. More concretely, there is interest in using this ability in Android to export APK files (which are protected by fs-verity) to "protected VMs". This would use Protected KVM (https://lwn.net/Articles/836693), which provides an isolated execution environment without having to trust the traditional "host". A "guest" VM can boot from a signed image and perform specific tasks in a minimum trusted environment using files that have fs-verity enabled on the host, without trusting the host or requiring that the guest has its own trusted storage. Technically, it would be possible to duplicate the metadata and store it in separate files for serving. However, that would be less efficient and would require extra care in userspace to maintain file consistency. In addition to the above, the ability to read the built-in signatures is useful because it allows a system that is using the in-kernel signature verification to migrate to userspace signature verification. Link: https://lore.kernel.org/r/20210115181819.34732-4-ebiggers@kernel.org Reviewed-by: Victor Hsieh <victorhsieh@google.com> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2021-01-16 02:18:16 +08:00
case FS_IOC_READ_VERITY_METADATA:
return f2fs_ioc_read_verity_metadata(filp, arg);
case FS_IOC_GETFSLABEL:
return f2fs_ioc_getfslabel(filp, arg);
case FS_IOC_SETFSLABEL:
return f2fs_ioc_setfslabel(filp, arg);
case F2FS_IOC_GET_COMPRESS_BLOCKS:
return f2fs_get_compress_blocks(filp, arg);
case F2FS_IOC_RELEASE_COMPRESS_BLOCKS:
return f2fs_release_compress_blocks(filp, arg);
case F2FS_IOC_RESERVE_COMPRESS_BLOCKS:
return f2fs_reserve_compress_blocks(filp, arg);
case F2FS_IOC_SEC_TRIM_FILE:
return f2fs_sec_trim_file(filp, arg);
case F2FS_IOC_GET_COMPRESS_OPTION:
return f2fs_ioc_get_compress_option(filp, arg);
case F2FS_IOC_SET_COMPRESS_OPTION:
return f2fs_ioc_set_compress_option(filp, arg);
case F2FS_IOC_DECOMPRESS_FILE:
return f2fs_ioc_decompress_file(filp, arg);
case F2FS_IOC_COMPRESS_FILE:
return f2fs_ioc_compress_file(filp, arg);
default:
return -ENOTTY;
}
}
long f2fs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
if (unlikely(f2fs_cp_error(F2FS_I_SB(file_inode(filp)))))
return -EIO;
if (!f2fs_is_checkpoint_ready(F2FS_I_SB(file_inode(filp))))
return -ENOSPC;
return __f2fs_ioctl(filp, cmd, arg);
}
/*
* Return %true if the given read or write request should use direct I/O, or
* %false if it should use buffered I/O.
*/
static bool f2fs_should_use_dio(struct inode *inode, struct kiocb *iocb,
struct iov_iter *iter)
{
unsigned int align;
if (!(iocb->ki_flags & IOCB_DIRECT))
return false;
if (f2fs_force_buffered_io(inode, iocb, iter))
return false;
/*
* Direct I/O not aligned to the disk's logical_block_size will be
* attempted, but will fail with -EINVAL.
*
* f2fs additionally requires that direct I/O be aligned to the
* filesystem block size, which is often a stricter requirement.
* However, f2fs traditionally falls back to buffered I/O on requests
* that are logical_block_size-aligned but not fs-block aligned.
*
* The below logic implements this behavior.
*/
align = iocb->ki_pos | iov_iter_alignment(iter);
if (!IS_ALIGNED(align, i_blocksize(inode)) &&
IS_ALIGNED(align, bdev_logical_block_size(inode->i_sb->s_bdev)))
return false;
return true;
}
static int f2fs_dio_read_end_io(struct kiocb *iocb, ssize_t size, int error,
unsigned int flags)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(file_inode(iocb->ki_filp));
dec_page_count(sbi, F2FS_DIO_READ);
if (error)
return error;
f2fs_update_iostat(sbi, APP_DIRECT_READ_IO, size);
return 0;
}
static const struct iomap_dio_ops f2fs_iomap_dio_read_ops = {
.end_io = f2fs_dio_read_end_io,
};
static ssize_t f2fs_dio_read_iter(struct kiocb *iocb, struct iov_iter *to)
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
{
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct f2fs_inode_info *fi = F2FS_I(inode);
const loff_t pos = iocb->ki_pos;
const size_t count = iov_iter_count(to);
struct iomap_dio *dio;
ssize_t ret;
if (count == 0)
return 0; /* skip atime update */
trace_f2fs_direct_IO_enter(inode, iocb, count, READ);
if (iocb->ki_flags & IOCB_NOWAIT) {
if (!f2fs_down_read_trylock(&fi->i_gc_rwsem[READ])) {
ret = -EAGAIN;
goto out;
}
} else {
f2fs_down_read(&fi->i_gc_rwsem[READ]);
}
/*
* We have to use __iomap_dio_rw() and iomap_dio_complete() instead of
* the higher-level function iomap_dio_rw() in order to ensure that the
* F2FS_DIO_READ counter will be decremented correctly in all cases.
*/
inc_page_count(sbi, F2FS_DIO_READ);
dio = __iomap_dio_rw(iocb, to, &f2fs_iomap_ops,
&f2fs_iomap_dio_read_ops, 0, 0);
if (IS_ERR_OR_NULL(dio)) {
ret = PTR_ERR_OR_ZERO(dio);
if (ret != -EIOCBQUEUED)
dec_page_count(sbi, F2FS_DIO_READ);
} else {
ret = iomap_dio_complete(dio);
}
f2fs_up_read(&fi->i_gc_rwsem[READ]);
file_accessed(file);
out:
trace_f2fs_direct_IO_exit(inode, pos, count, READ, ret);
return ret;
}
static ssize_t f2fs_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
{
struct inode *inode = file_inode(iocb->ki_filp);
ssize_t ret;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (!f2fs_is_compress_backend_ready(inode))
return -EOPNOTSUPP;
if (f2fs_should_use_dio(inode, iocb, to))
return f2fs_dio_read_iter(iocb, to);
ret = filemap_read(iocb, to, 0);
if (ret > 0)
f2fs_update_iostat(F2FS_I_SB(inode), APP_BUFFERED_READ_IO, ret);
return ret;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
}
static ssize_t f2fs_write_checks(struct kiocb *iocb, struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
ssize_t count;
int err;
if (IS_IMMUTABLE(inode))
return -EPERM;
if (is_inode_flag_set(inode, FI_COMPRESS_RELEASED))
return -EPERM;
count = generic_write_checks(iocb, from);
if (count <= 0)
return count;
err = file_modified(file);
if (err)
return err;
return count;
}
/*
* Preallocate blocks for a write request, if it is possible and helpful to do
* so. Returns a positive number if blocks may have been preallocated, 0 if no
* blocks were preallocated, or a negative errno value if something went
* seriously wrong. Also sets FI_PREALLOCATED_ALL on the inode if *all* the
* requested blocks (not just some of them) have been allocated.
*/
static int f2fs_preallocate_blocks(struct kiocb *iocb, struct iov_iter *iter,
bool dio)
{
struct inode *inode = file_inode(iocb->ki_filp);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
const loff_t pos = iocb->ki_pos;
const size_t count = iov_iter_count(iter);
struct f2fs_map_blocks map = {};
int flag;
int ret;
/* If it will be an out-of-place direct write, don't bother. */
if (dio && f2fs_lfs_mode(sbi))
return 0;
/*
* Don't preallocate holes aligned to DIO_SKIP_HOLES which turns into
* buffered IO, if DIO meets any holes.
*/
if (dio && i_size_read(inode) &&
(F2FS_BYTES_TO_BLK(pos) < F2FS_BLK_ALIGN(i_size_read(inode))))
return 0;
/* No-wait I/O can't allocate blocks. */
if (iocb->ki_flags & IOCB_NOWAIT)
return 0;
/* If it will be a short write, don't bother. */
if (fault_in_iov_iter_readable(iter, count))
return 0;
if (f2fs_has_inline_data(inode)) {
/* If the data will fit inline, don't bother. */
if (pos + count <= MAX_INLINE_DATA(inode))
return 0;
ret = f2fs_convert_inline_inode(inode);
if (ret)
return ret;
}
/* Do not preallocate blocks that will be written partially in 4KB. */
map.m_lblk = F2FS_BLK_ALIGN(pos);
map.m_len = F2FS_BYTES_TO_BLK(pos + count);
if (map.m_len > map.m_lblk)
map.m_len -= map.m_lblk;
else
map.m_len = 0;
map.m_may_create = true;
if (dio) {
map.m_seg_type = f2fs_rw_hint_to_seg_type(inode->i_write_hint);
flag = F2FS_GET_BLOCK_PRE_DIO;
} else {
map.m_seg_type = NO_CHECK_TYPE;
flag = F2FS_GET_BLOCK_PRE_AIO;
}
ret = f2fs_map_blocks(inode, &map, 1, flag);
/* -ENOSPC|-EDQUOT are fine to report the number of allocated blocks. */
if (ret < 0 && !((ret == -ENOSPC || ret == -EDQUOT) && map.m_len > 0))
return ret;
if (ret == 0)
set_inode_flag(inode, FI_PREALLOCATED_ALL);
return map.m_len;
}
static ssize_t f2fs_buffered_write_iter(struct kiocb *iocb,
struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
ssize_t ret;
if (iocb->ki_flags & IOCB_NOWAIT)
return -EOPNOTSUPP;
current->backing_dev_info = inode_to_bdi(inode);
ret = generic_perform_write(iocb, from);
current->backing_dev_info = NULL;
if (ret > 0) {
iocb->ki_pos += ret;
f2fs_update_iostat(F2FS_I_SB(inode), APP_BUFFERED_IO, ret);
}
return ret;
}
static int f2fs_dio_write_end_io(struct kiocb *iocb, ssize_t size, int error,
unsigned int flags)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(file_inode(iocb->ki_filp));
dec_page_count(sbi, F2FS_DIO_WRITE);
if (error)
return error;
f2fs_update_iostat(sbi, APP_DIRECT_IO, size);
return 0;
}
static const struct iomap_dio_ops f2fs_iomap_dio_write_ops = {
.end_io = f2fs_dio_write_end_io,
};
static ssize_t f2fs_dio_write_iter(struct kiocb *iocb, struct iov_iter *from,
bool *may_need_sync)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
struct f2fs_inode_info *fi = F2FS_I(inode);
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
const bool do_opu = f2fs_lfs_mode(sbi);
const loff_t pos = iocb->ki_pos;
const ssize_t count = iov_iter_count(from);
unsigned int dio_flags;
struct iomap_dio *dio;
ssize_t ret;
trace_f2fs_direct_IO_enter(inode, iocb, count, WRITE);
if (iocb->ki_flags & IOCB_NOWAIT) {
/* f2fs_convert_inline_inode() and block allocation can block */
if (f2fs_has_inline_data(inode) ||
!f2fs_overwrite_io(inode, pos, count)) {
ret = -EAGAIN;
goto out;
}
if (!f2fs_down_read_trylock(&fi->i_gc_rwsem[WRITE])) {
ret = -EAGAIN;
goto out;
}
if (do_opu && !f2fs_down_read_trylock(&fi->i_gc_rwsem[READ])) {
f2fs_up_read(&fi->i_gc_rwsem[WRITE]);
ret = -EAGAIN;
goto out;
}
} else {
ret = f2fs_convert_inline_inode(inode);
if (ret)
goto out;
f2fs_down_read(&fi->i_gc_rwsem[WRITE]);
if (do_opu)
f2fs_down_read(&fi->i_gc_rwsem[READ]);
}
/*
* We have to use __iomap_dio_rw() and iomap_dio_complete() instead of
* the higher-level function iomap_dio_rw() in order to ensure that the
* F2FS_DIO_WRITE counter will be decremented correctly in all cases.
*/
inc_page_count(sbi, F2FS_DIO_WRITE);
dio_flags = 0;
if (pos + count > inode->i_size)
dio_flags |= IOMAP_DIO_FORCE_WAIT;
dio = __iomap_dio_rw(iocb, from, &f2fs_iomap_ops,
&f2fs_iomap_dio_write_ops, dio_flags, 0);
if (IS_ERR_OR_NULL(dio)) {
ret = PTR_ERR_OR_ZERO(dio);
if (ret == -ENOTBLK)
ret = 0;
if (ret != -EIOCBQUEUED)
dec_page_count(sbi, F2FS_DIO_WRITE);
} else {
ret = iomap_dio_complete(dio);
}
if (do_opu)
f2fs_up_read(&fi->i_gc_rwsem[READ]);
f2fs_up_read(&fi->i_gc_rwsem[WRITE]);
if (ret < 0)
goto out;
if (pos + ret > inode->i_size)
f2fs_i_size_write(inode, pos + ret);
if (!do_opu)
set_inode_flag(inode, FI_UPDATE_WRITE);
if (iov_iter_count(from)) {
ssize_t ret2;
loff_t bufio_start_pos = iocb->ki_pos;
/*
* The direct write was partial, so we need to fall back to a
* buffered write for the remainder.
*/
ret2 = f2fs_buffered_write_iter(iocb, from);
if (iov_iter_count(from))
f2fs_write_failed(inode, iocb->ki_pos);
if (ret2 < 0)
goto out;
/*
* Ensure that the pagecache pages are written to disk and
* invalidated to preserve the expected O_DIRECT semantics.
*/
if (ret2 > 0) {
loff_t bufio_end_pos = bufio_start_pos + ret2 - 1;
ret += ret2;
ret2 = filemap_write_and_wait_range(file->f_mapping,
bufio_start_pos,
bufio_end_pos);
if (ret2 < 0)
goto out;
invalidate_mapping_pages(file->f_mapping,
bufio_start_pos >> PAGE_SHIFT,
bufio_end_pos >> PAGE_SHIFT);
}
} else {
/* iomap_dio_rw() already handled the generic_write_sync(). */
*may_need_sync = false;
}
out:
trace_f2fs_direct_IO_exit(inode, pos, count, WRITE, ret);
return ret;
}
static ssize_t f2fs_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
{
struct inode *inode = file_inode(iocb->ki_filp);
const loff_t orig_pos = iocb->ki_pos;
const size_t orig_count = iov_iter_count(from);
loff_t target_size;
bool dio;
bool may_need_sync = true;
int preallocated;
ssize_t ret;
if (unlikely(f2fs_cp_error(F2FS_I_SB(inode)))) {
ret = -EIO;
goto out;
}
if (!f2fs_is_compress_backend_ready(inode)) {
ret = -EOPNOTSUPP;
goto out;
}
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (iocb->ki_flags & IOCB_NOWAIT) {
if (!inode_trylock(inode)) {
ret = -EAGAIN;
goto out;
}
} else {
inode_lock(inode);
}
ret = f2fs_write_checks(iocb, from);
if (ret <= 0)
goto out_unlock;
/* Determine whether we will do a direct write or a buffered write. */
dio = f2fs_should_use_dio(inode, iocb, from);
/* Possibly preallocate the blocks for the write. */
target_size = iocb->ki_pos + iov_iter_count(from);
preallocated = f2fs_preallocate_blocks(iocb, from, dio);
if (preallocated < 0)
ret = preallocated;
else
/* Do the actual write. */
ret = dio ?
f2fs_dio_write_iter(iocb, from, &may_need_sync):
f2fs_buffered_write_iter(iocb, from);
/* Don't leave any preallocated blocks around past i_size. */
if (preallocated && i_size_read(inode) < target_size) {
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
filemap_invalidate_lock(inode->i_mapping);
if (!f2fs_truncate(inode))
file_dont_truncate(inode);
filemap_invalidate_unlock(inode->i_mapping);
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
} else {
file_dont_truncate(inode);
}
clear_inode_flag(inode, FI_PREALLOCATED_ALL);
out_unlock:
inode_unlock(inode);
out:
trace_f2fs_file_write_iter(inode, orig_pos, orig_count, ret);
if (ret > 0 && may_need_sync)
ret = generic_write_sync(iocb, ret);
return ret;
}
static int f2fs_file_fadvise(struct file *filp, loff_t offset, loff_t len,
int advice)
{
struct address_space *mapping;
struct backing_dev_info *bdi;
struct inode *inode = file_inode(filp);
int err;
if (advice == POSIX_FADV_SEQUENTIAL) {
if (S_ISFIFO(inode->i_mode))
return -ESPIPE;
mapping = filp->f_mapping;
if (!mapping || len < 0)
return -EINVAL;
bdi = inode_to_bdi(mapping->host);
filp->f_ra.ra_pages = bdi->ra_pages *
F2FS_I_SB(inode)->seq_file_ra_mul;
spin_lock(&filp->f_lock);
filp->f_mode &= ~FMODE_RANDOM;
spin_unlock(&filp->f_lock);
return 0;
}
err = generic_fadvise(filp, offset, len, advice);
if (!err && advice == POSIX_FADV_DONTNEED &&
test_opt(F2FS_I_SB(inode), COMPRESS_CACHE) &&
f2fs_compressed_file(inode))
f2fs_invalidate_compress_pages(F2FS_I_SB(inode), inode->i_ino);
return err;
}
#ifdef CONFIG_COMPAT
struct compat_f2fs_gc_range {
u32 sync;
compat_u64 start;
compat_u64 len;
};
#define F2FS_IOC32_GARBAGE_COLLECT_RANGE _IOW(F2FS_IOCTL_MAGIC, 11,\
struct compat_f2fs_gc_range)
static int f2fs_compat_ioc_gc_range(struct file *file, unsigned long arg)
{
struct compat_f2fs_gc_range __user *urange;
struct f2fs_gc_range range;
int err;
urange = compat_ptr(arg);
err = get_user(range.sync, &urange->sync);
err |= get_user(range.start, &urange->start);
err |= get_user(range.len, &urange->len);
if (err)
return -EFAULT;
return __f2fs_ioc_gc_range(file, &range);
}
struct compat_f2fs_move_range {
u32 dst_fd;
compat_u64 pos_in;
compat_u64 pos_out;
compat_u64 len;
};
#define F2FS_IOC32_MOVE_RANGE _IOWR(F2FS_IOCTL_MAGIC, 9, \
struct compat_f2fs_move_range)
static int f2fs_compat_ioc_move_range(struct file *file, unsigned long arg)
{
struct compat_f2fs_move_range __user *urange;
struct f2fs_move_range range;
int err;
urange = compat_ptr(arg);
err = get_user(range.dst_fd, &urange->dst_fd);
err |= get_user(range.pos_in, &urange->pos_in);
err |= get_user(range.pos_out, &urange->pos_out);
err |= get_user(range.len, &urange->len);
if (err)
return -EFAULT;
return __f2fs_ioc_move_range(file, &range);
}
long f2fs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
if (unlikely(f2fs_cp_error(F2FS_I_SB(file_inode(file)))))
return -EIO;
if (!f2fs_is_checkpoint_ready(F2FS_I_SB(file_inode(file))))
return -ENOSPC;
switch (cmd) {
case FS_IOC32_GETVERSION:
cmd = FS_IOC_GETVERSION;
break;
case F2FS_IOC32_GARBAGE_COLLECT_RANGE:
return f2fs_compat_ioc_gc_range(file, arg);
case F2FS_IOC32_MOVE_RANGE:
return f2fs_compat_ioc_move_range(file, arg);
case F2FS_IOC_START_ATOMIC_WRITE:
case F2FS_IOC_COMMIT_ATOMIC_WRITE:
case F2FS_IOC_START_VOLATILE_WRITE:
case F2FS_IOC_RELEASE_VOLATILE_WRITE:
case F2FS_IOC_ABORT_VOLATILE_WRITE:
case F2FS_IOC_SHUTDOWN:
case FITRIM:
case FS_IOC_SET_ENCRYPTION_POLICY:
case FS_IOC_GET_ENCRYPTION_PWSALT:
case FS_IOC_GET_ENCRYPTION_POLICY:
case FS_IOC_GET_ENCRYPTION_POLICY_EX:
case FS_IOC_ADD_ENCRYPTION_KEY:
case FS_IOC_REMOVE_ENCRYPTION_KEY:
case FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS:
case FS_IOC_GET_ENCRYPTION_KEY_STATUS:
case FS_IOC_GET_ENCRYPTION_NONCE:
case F2FS_IOC_GARBAGE_COLLECT:
case F2FS_IOC_WRITE_CHECKPOINT:
case F2FS_IOC_DEFRAGMENT:
case F2FS_IOC_FLUSH_DEVICE:
case F2FS_IOC_GET_FEATURES:
case F2FS_IOC_GET_PIN_FILE:
case F2FS_IOC_SET_PIN_FILE:
case F2FS_IOC_PRECACHE_EXTENTS:
f2fs: ioctl for removing a range from F2FS This ioctl shrinks a given length (aligned to sections) from end of the main area. Any cursegs and valid blocks will be moved out before invalidating the range. This feature can be used for adjusting partition sizes online. History of the patch: Sahitya Tummala: - Add this ioctl for f2fs_compat_ioctl() as well. - Fix debugfs status to reflect the online resize changes. - Fix potential race between online resize path and allocate new data block path or gc path. Others: - Rename some identifiers. - Add some error handling branches. - Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range. - Implement this interface as ext4's, and change the parameter from shrunk bytes to new block count of F2FS. - During resizing, force to empty sit_journal and forbid adding new entries to it, in order to avoid invalid segno in journal after resize. - Reduce sbi->user_block_count before resize starts. - Commit the updated superblock first, and then update in-memory metadata only when the former succeeds. - Target block count must align to sections. - Write checkpoint before and after committing the new superblock, w/o CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if resize fails after the new superblock is committed. - In free_segment_range(), reduce granularity of gc_mutex. - Add protection on curseg migration. - Add freeze_bdev() and thaw_bdev() for resize fs. - Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation. - Recover super_block and FS metadata when resize fails. - No need to clear CP_FSCK_FLAG in update_ckpt_flags(). - Clean up the sb and fs metadata update functions for resize_fs. Geert Uytterhoeven: - Use div_u64*() for 64-bit divisions Arnd Bergmann: - Not all architectures support get_user() with a 64-bit argument: ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined! Use copy_from_user() here, this will always work. Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-05 11:33:25 +08:00
case F2FS_IOC_RESIZE_FS:
f2fs: add fs-verity support Add fs-verity support to f2fs. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. The f2fs support for fs-verity consists of: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->readpages() to verify data as it's read from verity files and to support reading verity metadata pages. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). Like ext4, f2fs stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by f2fs with only some relatively small changes to f2fs. Extended attributes cannot be used because (a) f2fs limits the total size of an inode's xattr entries to 4096 bytes, which wouldn't be enough for even a single Merkle tree block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity metadata *must* be encrypted when the file is because it contains hashes of the plaintext data. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
case FS_IOC_ENABLE_VERITY:
case FS_IOC_MEASURE_VERITY:
fs-verity: add FS_IOC_READ_VERITY_METADATA ioctl Add an ioctl FS_IOC_READ_VERITY_METADATA which will allow reading verity metadata from a file that has fs-verity enabled, including: - The Merkle tree - The fsverity_descriptor (not including the signature if present) - The built-in signature, if present This ioctl has similar semantics to pread(). It is passed the type of metadata to read (one of the above three), and a buffer, offset, and size. It returns the number of bytes read or an error. Separate patches will add support for each of the above metadata types. This patch just adds the ioctl itself. This ioctl doesn't make any assumption about where the metadata is stored on-disk. It does assume the metadata is in a stable format, but that's basically already the case: - The Merkle tree and fsverity_descriptor are defined by how fs-verity file digests are computed; see the "File digest computation" section of Documentation/filesystems/fsverity.rst. Technically, the way in which the levels of the tree are ordered relative to each other wasn't previously specified, but it's logical to put the root level first. - The built-in signature is the value passed to FS_IOC_ENABLE_VERITY. This ioctl is useful because it allows writing a server program that takes a verity file and serves it to a client program, such that the client can do its own fs-verity compatible verification of the file. This only makes sense if the client doesn't trust the server and if the server needs to provide the storage for the client. More concretely, there is interest in using this ability in Android to export APK files (which are protected by fs-verity) to "protected VMs". This would use Protected KVM (https://lwn.net/Articles/836693), which provides an isolated execution environment without having to trust the traditional "host". A "guest" VM can boot from a signed image and perform specific tasks in a minimum trusted environment using files that have fs-verity enabled on the host, without trusting the host or requiring that the guest has its own trusted storage. Technically, it would be possible to duplicate the metadata and store it in separate files for serving. However, that would be less efficient and would require extra care in userspace to maintain file consistency. In addition to the above, the ability to read the built-in signatures is useful because it allows a system that is using the in-kernel signature verification to migrate to userspace signature verification. Link: https://lore.kernel.org/r/20210115181819.34732-4-ebiggers@kernel.org Reviewed-by: Victor Hsieh <victorhsieh@google.com> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2021-01-16 02:18:16 +08:00
case FS_IOC_READ_VERITY_METADATA:
case FS_IOC_GETFSLABEL:
case FS_IOC_SETFSLABEL:
case F2FS_IOC_GET_COMPRESS_BLOCKS:
case F2FS_IOC_RELEASE_COMPRESS_BLOCKS:
case F2FS_IOC_RESERVE_COMPRESS_BLOCKS:
case F2FS_IOC_SEC_TRIM_FILE:
case F2FS_IOC_GET_COMPRESS_OPTION:
case F2FS_IOC_SET_COMPRESS_OPTION:
case F2FS_IOC_DECOMPRESS_FILE:
case F2FS_IOC_COMPRESS_FILE:
break;
default:
return -ENOIOCTLCMD;
}
return __f2fs_ioctl(file, cmd, (unsigned long) compat_ptr(arg));
}
#endif
const struct file_operations f2fs_file_operations = {
.llseek = f2fs_llseek,
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
.read_iter = f2fs_file_read_iter,
.write_iter = f2fs_file_write_iter,
.open = f2fs_file_open,
.release = f2fs_release_file,
.mmap = f2fs_file_mmap,
.flush = f2fs_file_flush,
.fsync = f2fs_sync_file,
.fallocate = f2fs_fallocate,
.unlocked_ioctl = f2fs_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = f2fs_compat_ioctl,
#endif
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
.fadvise = f2fs_file_fadvise,
};