linux/arch/x86/mm/fault.c

1344 lines
33 KiB
C
Raw Normal View History

/*
* Copyright (C) 1995 Linus Torvalds
* Copyright (C) 2001, 2002 Andi Kleen, SuSE Labs.
* Copyright (C) 2008-2009, Red Hat Inc., Ingo Molnar
*/
#include <linux/sched.h> /* test_thread_flag(), ... */
#include <linux/kdebug.h> /* oops_begin/end, ... */
#include <linux/module.h> /* search_exception_table */
#include <linux/bootmem.h> /* max_low_pfn */
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
#include <linux/kprobes.h> /* NOKPROBE_SYMBOL, ... */
#include <linux/mmiotrace.h> /* kmmio_handler, ... */
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 18:02:48 +08:00
#include <linux/perf_event.h> /* perf_sw_event */
#include <linux/hugetlb.h> /* hstate_index_to_shift */
#include <linux/prefetch.h> /* prefetchw */
#include <linux/context_tracking.h> /* exception_enter(), ... */
mm/fault, arch: Use pagefault_disable() to check for disabled pagefaults in the handler Introduce faulthandler_disabled() and use it to check for irq context and disabled pagefaults (via pagefault_disable()) in the pagefault handlers. Please note that we keep the in_atomic() checks in place - to detect whether in irq context (in which case preemption is always properly disabled). In contrast, preempt_disable() should never be used to disable pagefaults. With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt counter, and therefore the result of in_atomic() differs. We validate that condition by using might_fault() checks when calling might_sleep(). Therefore, add a comment to faulthandler_disabled(), describing why this is needed. faulthandler_disabled() and pagefault_disable() are defined in linux/uaccess.h, so let's properly add that include to all relevant files. This patch is based on a patch from Thomas Gleixner. Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 23:52:11 +08:00
#include <linux/uaccess.h> /* faulthandler_disabled() */
#include <asm/traps.h> /* dotraplinkage, ... */
#include <asm/pgalloc.h> /* pgd_*(), ... */
#include <asm/kmemcheck.h> /* kmemcheck_*(), ... */
#include <asm/fixmap.h> /* VSYSCALL_ADDR */
#include <asm/vsyscall.h> /* emulate_vsyscall */
#include <asm/vm86.h> /* struct vm86 */
#define CREATE_TRACE_POINTS
#include <asm/trace/exceptions.h>
/*
* Page fault error code bits:
*
* bit 0 == 0: no page found 1: protection fault
* bit 1 == 0: read access 1: write access
* bit 2 == 0: kernel-mode access 1: user-mode access
* bit 3 == 1: use of reserved bit detected
* bit 4 == 1: fault was an instruction fetch
* bit 5 == 1: protection keys block access
*/
enum x86_pf_error_code {
PF_PROT = 1 << 0,
PF_WRITE = 1 << 1,
PF_USER = 1 << 2,
PF_RSVD = 1 << 3,
PF_INSTR = 1 << 4,
PF_PK = 1 << 5,
};
/*
* Returns 0 if mmiotrace is disabled, or if the fault is not
* handled by mmiotrace:
*/
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
static nokprobe_inline int
kmmio_fault(struct pt_regs *regs, unsigned long addr)
{
x86: mmiotrace full patch, preview 1 kmmio.c handles the list of mmio probes with callbacks, list of traced pages, and attaching into the page fault handler and die notifier. It arms, traps and disarms the given pages, this is the core of mmiotrace. mmio-mod.c is a user interface, hooking into ioremap functions and registering the mmio probes. It also decodes the required information from trapped mmio accesses via the pre and post callbacks in each probe. Currently, hooking into ioremap functions works by redefining the symbols of the target (binary) kernel module, so that it calls the traced versions of the functions. The most notable changes done since the last discussion are: - kmmio.c is a built-in, not part of the module - direct call from fault.c to kmmio.c, removing all dynamic hooks - prepare for unregistering probes at any time - make kmmio re-initializable and accessible to more than one user - rewrite kmmio locking to remove all spinlocks from page fault path Can I abuse call_rcu() like I do in kmmio.c:unregister_kmmio_probe() or is there a better way? The function called via call_rcu() itself calls call_rcu() again, will this work or break? There I need a second grace period for RCU after the first grace period for page faults. Mmiotrace itself (mmio-mod.c) is still a module, I am going to attack that next. At some point I will start looking into how to make mmiotrace a tracer component of ftrace (thanks for the hint, Ingo). Ftrace should make the user space part of mmiotracing as simple as 'cat /debug/trace/mmio > dump.txt'. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 03:20:57 +08:00
if (unlikely(is_kmmio_active()))
if (kmmio_handler(regs, addr) == 1)
return -1;
return 0;
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
static nokprobe_inline int kprobes_fault(struct pt_regs *regs)
[PATCH] Notify page fault call chain for x86_64 Currently in the do_page_fault() code path, we call notify_die(DIE_PAGE_FAULT, ...) to notify the page fault. Since notify_die() is highly overloaded, this page fault notification is currently being sent to all the components registered with register_die_notification() which uses the same die_chain to loop for all the registered components which is unnecessary. In order to optimize the do_page_fault() code path, this critical page fault notification is now moved to different call chain and the test results showed great improvements. And the kprobes which is interested in this notifications, now registers onto this new call chain only when it need to, i.e Kprobes now registers for page fault notification only when their are an active probes and unregisters from this page fault notification when no probes are active. I have incorporated all the feedback given by Ananth and Keith and everyone, and thanks for all the review feedback. This patch: Overloading of page fault notification with the notify_die() has performance issues(since the only interested components for page fault is kprobes and/or kdb) and hence this patch introduces the new notifier call chain exclusively for page fault notifications their by avoiding notifying unnecessary components in the do_page_fault() code path. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 15:25:25 +08:00
{
int ret = 0;
/* kprobe_running() needs smp_processor_id() */
if (kprobes_built_in() && !user_mode(regs)) {
preempt_disable();
if (kprobe_running() && kprobe_fault_handler(regs, 14))
ret = 1;
preempt_enable();
}
[PATCH] Notify page fault call chain for x86_64 Currently in the do_page_fault() code path, we call notify_die(DIE_PAGE_FAULT, ...) to notify the page fault. Since notify_die() is highly overloaded, this page fault notification is currently being sent to all the components registered with register_die_notification() which uses the same die_chain to loop for all the registered components which is unnecessary. In order to optimize the do_page_fault() code path, this critical page fault notification is now moved to different call chain and the test results showed great improvements. And the kprobes which is interested in this notifications, now registers onto this new call chain only when it need to, i.e Kprobes now registers for page fault notification only when their are an active probes and unregisters from this page fault notification when no probes are active. I have incorporated all the feedback given by Ananth and Keith and everyone, and thanks for all the review feedback. This patch: Overloading of page fault notification with the notify_die() has performance issues(since the only interested components for page fault is kprobes and/or kdb) and hence this patch introduces the new notifier call chain exclusively for page fault notifications their by avoiding notifying unnecessary components in the do_page_fault() code path. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 15:25:25 +08:00
return ret;
}
[PATCH] Notify page fault call chain for x86_64 Currently in the do_page_fault() code path, we call notify_die(DIE_PAGE_FAULT, ...) to notify the page fault. Since notify_die() is highly overloaded, this page fault notification is currently being sent to all the components registered with register_die_notification() which uses the same die_chain to loop for all the registered components which is unnecessary. In order to optimize the do_page_fault() code path, this critical page fault notification is now moved to different call chain and the test results showed great improvements. And the kprobes which is interested in this notifications, now registers onto this new call chain only when it need to, i.e Kprobes now registers for page fault notification only when their are an active probes and unregisters from this page fault notification when no probes are active. I have incorporated all the feedback given by Ananth and Keith and everyone, and thanks for all the review feedback. This patch: Overloading of page fault notification with the notify_die() has performance issues(since the only interested components for page fault is kprobes and/or kdb) and hence this patch introduces the new notifier call chain exclusively for page fault notifications their by avoiding notifying unnecessary components in the do_page_fault() code path. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 15:25:25 +08:00
/*
* Prefetch quirks:
*
* 32-bit mode:
*
* Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
* Check that here and ignore it.
*
* 64-bit mode:
*
* Sometimes the CPU reports invalid exceptions on prefetch.
* Check that here and ignore it.
*
* Opcode checker based on code by Richard Brunner.
*/
static inline int
check_prefetch_opcode(struct pt_regs *regs, unsigned char *instr,
unsigned char opcode, int *prefetch)
{
unsigned char instr_hi = opcode & 0xf0;
unsigned char instr_lo = opcode & 0x0f;
switch (instr_hi) {
case 0x20:
case 0x30:
/*
* Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
* In X86_64 long mode, the CPU will signal invalid
* opcode if some of these prefixes are present so
* X86_64 will never get here anyway
*/
return ((instr_lo & 7) == 0x6);
#ifdef CONFIG_X86_64
case 0x40:
/*
* In AMD64 long mode 0x40..0x4F are valid REX prefixes
* Need to figure out under what instruction mode the
* instruction was issued. Could check the LDT for lm,
* but for now it's good enough to assume that long
* mode only uses well known segments or kernel.
*/
return (!user_mode(regs) || user_64bit_mode(regs));
#endif
case 0x60:
/* 0x64 thru 0x67 are valid prefixes in all modes. */
return (instr_lo & 0xC) == 0x4;
case 0xF0:
/* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */
return !instr_lo || (instr_lo>>1) == 1;
case 0x00:
/* Prefetch instruction is 0x0F0D or 0x0F18 */
if (probe_kernel_address(instr, opcode))
return 0;
*prefetch = (instr_lo == 0xF) &&
(opcode == 0x0D || opcode == 0x18);
return 0;
default:
return 0;
}
}
static int
is_prefetch(struct pt_regs *regs, unsigned long error_code, unsigned long addr)
{
unsigned char *max_instr;
unsigned char *instr;
int prefetch = 0;
/*
* If it was a exec (instruction fetch) fault on NX page, then
* do not ignore the fault:
*/
if (error_code & PF_INSTR)
return 0;
instr = (void *)convert_ip_to_linear(current, regs);
max_instr = instr + 15;
if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE_MAX)
return 0;
while (instr < max_instr) {
unsigned char opcode;
if (probe_kernel_address(instr, opcode))
break;
instr++;
if (!check_prefetch_opcode(regs, instr, opcode, &prefetch))
break;
}
return prefetch;
}
static void
force_sig_info_fault(int si_signo, int si_code, unsigned long address,
struct task_struct *tsk, int fault)
{
unsigned lsb = 0;
siginfo_t info;
info.si_signo = si_signo;
info.si_errno = 0;
info.si_code = si_code;
info.si_addr = (void __user *)address;
if (fault & VM_FAULT_HWPOISON_LARGE)
lsb = hstate_index_to_shift(VM_FAULT_GET_HINDEX(fault));
if (fault & VM_FAULT_HWPOISON)
lsb = PAGE_SHIFT;
info.si_addr_lsb = lsb;
force_sig_info(si_signo, &info, tsk);
}
DEFINE_SPINLOCK(pgd_lock);
LIST_HEAD(pgd_list);
#ifdef CONFIG_X86_32
static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
{
unsigned index = pgd_index(address);
pgd_t *pgd_k;
pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
pgd += index;
pgd_k = init_mm.pgd + index;
if (!pgd_present(*pgd_k))
return NULL;
/*
* set_pgd(pgd, *pgd_k); here would be useless on PAE
* and redundant with the set_pmd() on non-PAE. As would
* set_pud.
*/
pud = pud_offset(pgd, address);
pud_k = pud_offset(pgd_k, address);
if (!pud_present(*pud_k))
return NULL;
pmd = pmd_offset(pud, address);
pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
return NULL;
if (!pmd_present(*pmd))
set_pmd(pmd, *pmd_k);
else
BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
return pmd_k;
}
void vmalloc_sync_all(void)
{
unsigned long address;
if (SHARED_KERNEL_PMD)
return;
for (address = VMALLOC_START & PMD_MASK;
address >= TASK_SIZE && address < FIXADDR_TOP;
address += PMD_SIZE) {
struct page *page;
spin_lock(&pgd_lock);
list_for_each_entry(page, &pgd_list, lru) {
spinlock_t *pgt_lock;
pmd_t *ret;
/* the pgt_lock only for Xen */
pgt_lock = &pgd_page_get_mm(page)->page_table_lock;
spin_lock(pgt_lock);
ret = vmalloc_sync_one(page_address(page), address);
spin_unlock(pgt_lock);
if (!ret)
break;
}
spin_unlock(&pgd_lock);
}
}
/*
* 32-bit:
*
* Handle a fault on the vmalloc or module mapping area
*/
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
static noinline int vmalloc_fault(unsigned long address)
{
unsigned long pgd_paddr;
pmd_t *pmd_k;
pte_t *pte_k;
/* Make sure we are in vmalloc area: */
if (!(address >= VMALLOC_START && address < VMALLOC_END))
return -1;
WARN_ON_ONCE(in_nmi());
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
*
* Do _not_ use "current" here. We might be inside
* an interrupt in the middle of a task switch..
*/
pgd_paddr = read_cr3();
pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
if (!pmd_k)
return -1;
pte_k = pte_offset_kernel(pmd_k, address);
if (!pte_present(*pte_k))
return -1;
return 0;
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
NOKPROBE_SYMBOL(vmalloc_fault);
/*
* Did it hit the DOS screen memory VA from vm86 mode?
*/
static inline void
check_v8086_mode(struct pt_regs *regs, unsigned long address,
struct task_struct *tsk)
{
#ifdef CONFIG_VM86
unsigned long bit;
if (!v8086_mode(regs) || !tsk->thread.vm86)
return;
bit = (address - 0xA0000) >> PAGE_SHIFT;
if (bit < 32)
tsk->thread.vm86->screen_bitmap |= 1 << bit;
#endif
}
static bool low_pfn(unsigned long pfn)
{
return pfn < max_low_pfn;
}
static void dump_pagetable(unsigned long address)
{
pgd_t *base = __va(read_cr3());
pgd_t *pgd = &base[pgd_index(address)];
pmd_t *pmd;
pte_t *pte;
#ifdef CONFIG_X86_PAE
printk("*pdpt = %016Lx ", pgd_val(*pgd));
if (!low_pfn(pgd_val(*pgd) >> PAGE_SHIFT) || !pgd_present(*pgd))
goto out;
#endif
pmd = pmd_offset(pud_offset(pgd, address), address);
printk(KERN_CONT "*pde = %0*Lx ", sizeof(*pmd) * 2, (u64)pmd_val(*pmd));
/*
* We must not directly access the pte in the highpte
* case if the page table is located in highmem.
* And let's rather not kmap-atomic the pte, just in case
* it's allocated already:
*/
if (!low_pfn(pmd_pfn(*pmd)) || !pmd_present(*pmd) || pmd_large(*pmd))
goto out;
pte = pte_offset_kernel(pmd, address);
printk("*pte = %0*Lx ", sizeof(*pte) * 2, (u64)pte_val(*pte));
out:
printk("\n");
}
#else /* CONFIG_X86_64: */
void vmalloc_sync_all(void)
{
x86/mm/hotplug: Modify PGD entry when removing memory When hot-adding/removing memory, sync_global_pgds() is called for synchronizing PGD to PGD entries of all processes MM. But when hot-removing memory, sync_global_pgds() does not work correctly. At first, sync_global_pgds() checks whether target PGD is none or not. And if PGD is none, the PGD is skipped. But when hot-removing memory, PGD may be none since PGD may be cleared by free_pud_table(). So when sync_global_pgds() is called after hot-removing memory, sync_global_pgds() should not skip PGD even if the PGD is none. And sync_global_pgds() must clear PGD entries of all processes MM. Currently sync_global_pgds() does not clear PGD entries of all processes MM when hot-removing memory. So when hot adding memory which is same memory range as removed memory after hot-removing memory, following call traces are shown: kernel BUG at arch/x86/mm/init_64.c:206! ... [<ffffffff815e0c80>] kernel_physical_mapping_init+0x1b2/0x1d2 [<ffffffff815ced94>] init_memory_mapping+0x1d4/0x380 [<ffffffff8104aebd>] arch_add_memory+0x3d/0xd0 [<ffffffff815d03d9>] add_memory+0xb9/0x1b0 [<ffffffff81352415>] acpi_memory_device_add+0x1af/0x28e [<ffffffff81325dc4>] acpi_bus_device_attach+0x8c/0xf0 [<ffffffff813413b9>] acpi_ns_walk_namespace+0xc8/0x17f [<ffffffff81325d38>] ? acpi_bus_type_and_status+0xb7/0xb7 [<ffffffff81325d38>] ? acpi_bus_type_and_status+0xb7/0xb7 [<ffffffff813418ed>] acpi_walk_namespace+0x95/0xc5 [<ffffffff81326b4c>] acpi_bus_scan+0x9a/0xc2 [<ffffffff81326bff>] acpi_scan_bus_device_check+0x8b/0x12e [<ffffffff81326cb5>] acpi_scan_device_check+0x13/0x15 [<ffffffff81320122>] acpi_os_execute_deferred+0x25/0x32 [<ffffffff8107e02b>] process_one_work+0x17b/0x460 [<ffffffff8107edfb>] worker_thread+0x11b/0x400 [<ffffffff8107ece0>] ? rescuer_thread+0x400/0x400 [<ffffffff81085aef>] kthread+0xcf/0xe0 [<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140 [<ffffffff815fc76c>] ret_from_fork+0x7c/0xb0 [<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140 This patch clears PGD entries of all processes MM when sync_global_pgds() is called after hot-removing memory Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-23 04:27:34 +08:00
sync_global_pgds(VMALLOC_START & PGDIR_MASK, VMALLOC_END, 0);
}
/*
* 64-bit:
*
* Handle a fault on the vmalloc area
*
* This assumes no large pages in there.
*/
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
static noinline int vmalloc_fault(unsigned long address)
{
pgd_t *pgd, *pgd_ref;
pud_t *pud, *pud_ref;
pmd_t *pmd, *pmd_ref;
pte_t *pte, *pte_ref;
/* Make sure we are in vmalloc area: */
if (!(address >= VMALLOC_START && address < VMALLOC_END))
return -1;
WARN_ON_ONCE(in_nmi());
/*
* Copy kernel mappings over when needed. This can also
* happen within a race in page table update. In the later
* case just flush:
*/
pgd = pgd_offset(current->active_mm, address);
pgd_ref = pgd_offset_k(address);
if (pgd_none(*pgd_ref))
return -1;
x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates In paravirtualized x86_64 kernels, vmalloc_fault may cause an oops when lazy MMU updates are enabled, because set_pgd effects are being deferred. One instance of this problem is during process mm cleanup with memory cgroups enabled. The chain of events is as follows: - zap_pte_range enables lazy MMU updates - zap_pte_range eventually calls mem_cgroup_charge_statistics, which accesses the vmalloc'd mem_cgroup per-cpu stat area - vmalloc_fault is triggered which tries to sync the corresponding PGD entry with set_pgd, but the update is deferred - vmalloc_fault oopses due to a mismatch in the PUD entries The OOPs usually looks as so: ------------[ cut here ]------------ kernel BUG at arch/x86/mm/fault.c:396! invalid opcode: 0000 [#1] SMP .. snip .. CPU 1 Pid: 10866, comm: httpd Not tainted 3.6.10-4.fc18.x86_64 #1 RIP: e030:[<ffffffff816271bf>] [<ffffffff816271bf>] vmalloc_fault+0x11f/0x208 .. snip .. Call Trace: [<ffffffff81627759>] do_page_fault+0x399/0x4b0 [<ffffffff81004f4c>] ? xen_mc_extend_args+0xec/0x110 [<ffffffff81624065>] page_fault+0x25/0x30 [<ffffffff81184d03>] ? mem_cgroup_charge_statistics.isra.13+0x13/0x50 [<ffffffff81186f78>] __mem_cgroup_uncharge_common+0xd8/0x350 [<ffffffff8118aac7>] mem_cgroup_uncharge_page+0x57/0x60 [<ffffffff8115fbc0>] page_remove_rmap+0xe0/0x150 [<ffffffff8115311a>] ? vm_normal_page+0x1a/0x80 [<ffffffff81153e61>] unmap_single_vma+0x531/0x870 [<ffffffff81154962>] unmap_vmas+0x52/0xa0 [<ffffffff81007442>] ? pte_mfn_to_pfn+0x72/0x100 [<ffffffff8115c8f8>] exit_mmap+0x98/0x170 [<ffffffff810050d9>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e [<ffffffff81059ce3>] mmput+0x83/0xf0 [<ffffffff810624c4>] exit_mm+0x104/0x130 [<ffffffff8106264a>] do_exit+0x15a/0x8c0 [<ffffffff810630ff>] do_group_exit+0x3f/0xa0 [<ffffffff81063177>] sys_exit_group+0x17/0x20 [<ffffffff8162bae9>] system_call_fastpath+0x16/0x1b Calling arch_flush_lazy_mmu_mode immediately after set_pgd makes the changes visible to the consistency checks. Cc: <stable@vger.kernel.org> RedHat-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=914737 Tested-by: Josh Boyer <jwboyer@redhat.com> Reported-and-Tested-by: Krishna Raman <kraman@redhat.com> Signed-off-by: Samu Kallio <samu.kallio@aberdeencloud.com> Link: http://lkml.kernel.org/r/1364045796-10720-1-git-send-email-konrad.wilk@oracle.com Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-03-23 21:36:35 +08:00
if (pgd_none(*pgd)) {
set_pgd(pgd, *pgd_ref);
x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates In paravirtualized x86_64 kernels, vmalloc_fault may cause an oops when lazy MMU updates are enabled, because set_pgd effects are being deferred. One instance of this problem is during process mm cleanup with memory cgroups enabled. The chain of events is as follows: - zap_pte_range enables lazy MMU updates - zap_pte_range eventually calls mem_cgroup_charge_statistics, which accesses the vmalloc'd mem_cgroup per-cpu stat area - vmalloc_fault is triggered which tries to sync the corresponding PGD entry with set_pgd, but the update is deferred - vmalloc_fault oopses due to a mismatch in the PUD entries The OOPs usually looks as so: ------------[ cut here ]------------ kernel BUG at arch/x86/mm/fault.c:396! invalid opcode: 0000 [#1] SMP .. snip .. CPU 1 Pid: 10866, comm: httpd Not tainted 3.6.10-4.fc18.x86_64 #1 RIP: e030:[<ffffffff816271bf>] [<ffffffff816271bf>] vmalloc_fault+0x11f/0x208 .. snip .. Call Trace: [<ffffffff81627759>] do_page_fault+0x399/0x4b0 [<ffffffff81004f4c>] ? xen_mc_extend_args+0xec/0x110 [<ffffffff81624065>] page_fault+0x25/0x30 [<ffffffff81184d03>] ? mem_cgroup_charge_statistics.isra.13+0x13/0x50 [<ffffffff81186f78>] __mem_cgroup_uncharge_common+0xd8/0x350 [<ffffffff8118aac7>] mem_cgroup_uncharge_page+0x57/0x60 [<ffffffff8115fbc0>] page_remove_rmap+0xe0/0x150 [<ffffffff8115311a>] ? vm_normal_page+0x1a/0x80 [<ffffffff81153e61>] unmap_single_vma+0x531/0x870 [<ffffffff81154962>] unmap_vmas+0x52/0xa0 [<ffffffff81007442>] ? pte_mfn_to_pfn+0x72/0x100 [<ffffffff8115c8f8>] exit_mmap+0x98/0x170 [<ffffffff810050d9>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e [<ffffffff81059ce3>] mmput+0x83/0xf0 [<ffffffff810624c4>] exit_mm+0x104/0x130 [<ffffffff8106264a>] do_exit+0x15a/0x8c0 [<ffffffff810630ff>] do_group_exit+0x3f/0xa0 [<ffffffff81063177>] sys_exit_group+0x17/0x20 [<ffffffff8162bae9>] system_call_fastpath+0x16/0x1b Calling arch_flush_lazy_mmu_mode immediately after set_pgd makes the changes visible to the consistency checks. Cc: <stable@vger.kernel.org> RedHat-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=914737 Tested-by: Josh Boyer <jwboyer@redhat.com> Reported-and-Tested-by: Krishna Raman <kraman@redhat.com> Signed-off-by: Samu Kallio <samu.kallio@aberdeencloud.com> Link: http://lkml.kernel.org/r/1364045796-10720-1-git-send-email-konrad.wilk@oracle.com Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-03-23 21:36:35 +08:00
arch_flush_lazy_mmu_mode();
} else {
BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates In paravirtualized x86_64 kernels, vmalloc_fault may cause an oops when lazy MMU updates are enabled, because set_pgd effects are being deferred. One instance of this problem is during process mm cleanup with memory cgroups enabled. The chain of events is as follows: - zap_pte_range enables lazy MMU updates - zap_pte_range eventually calls mem_cgroup_charge_statistics, which accesses the vmalloc'd mem_cgroup per-cpu stat area - vmalloc_fault is triggered which tries to sync the corresponding PGD entry with set_pgd, but the update is deferred - vmalloc_fault oopses due to a mismatch in the PUD entries The OOPs usually looks as so: ------------[ cut here ]------------ kernel BUG at arch/x86/mm/fault.c:396! invalid opcode: 0000 [#1] SMP .. snip .. CPU 1 Pid: 10866, comm: httpd Not tainted 3.6.10-4.fc18.x86_64 #1 RIP: e030:[<ffffffff816271bf>] [<ffffffff816271bf>] vmalloc_fault+0x11f/0x208 .. snip .. Call Trace: [<ffffffff81627759>] do_page_fault+0x399/0x4b0 [<ffffffff81004f4c>] ? xen_mc_extend_args+0xec/0x110 [<ffffffff81624065>] page_fault+0x25/0x30 [<ffffffff81184d03>] ? mem_cgroup_charge_statistics.isra.13+0x13/0x50 [<ffffffff81186f78>] __mem_cgroup_uncharge_common+0xd8/0x350 [<ffffffff8118aac7>] mem_cgroup_uncharge_page+0x57/0x60 [<ffffffff8115fbc0>] page_remove_rmap+0xe0/0x150 [<ffffffff8115311a>] ? vm_normal_page+0x1a/0x80 [<ffffffff81153e61>] unmap_single_vma+0x531/0x870 [<ffffffff81154962>] unmap_vmas+0x52/0xa0 [<ffffffff81007442>] ? pte_mfn_to_pfn+0x72/0x100 [<ffffffff8115c8f8>] exit_mmap+0x98/0x170 [<ffffffff810050d9>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e [<ffffffff81059ce3>] mmput+0x83/0xf0 [<ffffffff810624c4>] exit_mm+0x104/0x130 [<ffffffff8106264a>] do_exit+0x15a/0x8c0 [<ffffffff810630ff>] do_group_exit+0x3f/0xa0 [<ffffffff81063177>] sys_exit_group+0x17/0x20 [<ffffffff8162bae9>] system_call_fastpath+0x16/0x1b Calling arch_flush_lazy_mmu_mode immediately after set_pgd makes the changes visible to the consistency checks. Cc: <stable@vger.kernel.org> RedHat-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=914737 Tested-by: Josh Boyer <jwboyer@redhat.com> Reported-and-Tested-by: Krishna Raman <kraman@redhat.com> Signed-off-by: Samu Kallio <samu.kallio@aberdeencloud.com> Link: http://lkml.kernel.org/r/1364045796-10720-1-git-send-email-konrad.wilk@oracle.com Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-03-23 21:36:35 +08:00
}
/*
* Below here mismatches are bugs because these lower tables
* are shared:
*/
pud = pud_offset(pgd, address);
pud_ref = pud_offset(pgd_ref, address);
if (pud_none(*pud_ref))
return -1;
if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
BUG();
pmd = pmd_offset(pud, address);
pmd_ref = pmd_offset(pud_ref, address);
if (pmd_none(*pmd_ref))
return -1;
if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
BUG();
pte_ref = pte_offset_kernel(pmd_ref, address);
if (!pte_present(*pte_ref))
return -1;
pte = pte_offset_kernel(pmd, address);
/*
* Don't use pte_page here, because the mappings can point
* outside mem_map, and the NUMA hash lookup cannot handle
* that:
*/
if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
BUG();
return 0;
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
NOKPROBE_SYMBOL(vmalloc_fault);
#ifdef CONFIG_CPU_SUP_AMD
static const char errata93_warning[] =
KERN_ERR
"******* Your BIOS seems to not contain a fix for K8 errata #93\n"
"******* Working around it, but it may cause SEGVs or burn power.\n"
"******* Please consider a BIOS update.\n"
"******* Disabling USB legacy in the BIOS may also help.\n";
#endif
/*
* No vm86 mode in 64-bit mode:
*/
static inline void
check_v8086_mode(struct pt_regs *regs, unsigned long address,
struct task_struct *tsk)
{
}
static int bad_address(void *p)
{
unsigned long dummy;
return probe_kernel_address((unsigned long *)p, dummy);
}
static void dump_pagetable(unsigned long address)
{
pgd_t *base = __va(read_cr3() & PHYSICAL_PAGE_MASK);
pgd_t *pgd = base + pgd_index(address);
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
if (bad_address(pgd))
goto bad;
printk("PGD %lx ", pgd_val(*pgd));
if (!pgd_present(*pgd))
goto out;
pud = pud_offset(pgd, address);
if (bad_address(pud))
goto bad;
printk("PUD %lx ", pud_val(*pud));
if (!pud_present(*pud) || pud_large(*pud))
goto out;
pmd = pmd_offset(pud, address);
if (bad_address(pmd))
goto bad;
printk("PMD %lx ", pmd_val(*pmd));
if (!pmd_present(*pmd) || pmd_large(*pmd))
goto out;
pte = pte_offset_kernel(pmd, address);
if (bad_address(pte))
goto bad;
printk("PTE %lx", pte_val(*pte));
out:
printk("\n");
return;
bad:
printk("BAD\n");
}
#endif /* CONFIG_X86_64 */
/*
* Workaround for K8 erratum #93 & buggy BIOS.
*
* BIOS SMM functions are required to use a specific workaround
* to avoid corruption of the 64bit RIP register on C stepping K8.
*
* A lot of BIOS that didn't get tested properly miss this.
*
* The OS sees this as a page fault with the upper 32bits of RIP cleared.
* Try to work around it here.
*
* Note we only handle faults in kernel here.
* Does nothing on 32-bit.
*/
static int is_errata93(struct pt_regs *regs, unsigned long address)
{
#if defined(CONFIG_X86_64) && defined(CONFIG_CPU_SUP_AMD)
if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD
|| boot_cpu_data.x86 != 0xf)
return 0;
if (address != regs->ip)
return 0;
if ((address >> 32) != 0)
return 0;
address |= 0xffffffffUL << 32;
if ((address >= (u64)_stext && address <= (u64)_etext) ||
(address >= MODULES_VADDR && address <= MODULES_END)) {
printk_once(errata93_warning);
regs->ip = address;
return 1;
}
#endif
return 0;
}
/*
* Work around K8 erratum #100 K8 in compat mode occasionally jumps
* to illegal addresses >4GB.
*
* We catch this in the page fault handler because these addresses
* are not reachable. Just detect this case and return. Any code
* segment in LDT is compatibility mode.
*/
static int is_errata100(struct pt_regs *regs, unsigned long address)
{
#ifdef CONFIG_X86_64
if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) && (address >> 32))
return 1;
#endif
return 0;
}
static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
{
#ifdef CONFIG_X86_F00F_BUG
unsigned long nr;
/*
* Pentium F0 0F C7 C8 bug workaround:
*/
if (boot_cpu_has_bug(X86_BUG_F00F)) {
nr = (address - idt_descr.address) >> 3;
if (nr == 6) {
do_invalid_op(regs, 0);
return 1;
}
}
#endif
return 0;
}
static const char nx_warning[] = KERN_CRIT
"kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n";
static const char smep_warning[] = KERN_CRIT
"unable to execute userspace code (SMEP?) (uid: %d)\n";
static void
show_fault_oops(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
{
if (!oops_may_print())
return;
if (error_code & PF_INSTR) {
unsigned int level;
pgd_t *pgd;
pte_t *pte;
pgd = __va(read_cr3() & PHYSICAL_PAGE_MASK);
pgd += pgd_index(address);
pte = lookup_address_in_pgd(pgd, address, &level);
if (pte && pte_present(*pte) && !pte_exec(*pte))
printk(nx_warning, from_kuid(&init_user_ns, current_uid()));
if (pte && pte_present(*pte) && pte_exec(*pte) &&
(pgd_flags(*pgd) & _PAGE_USER) &&
(__read_cr4() & X86_CR4_SMEP))
printk(smep_warning, from_kuid(&init_user_ns, current_uid()));
}
printk(KERN_ALERT "BUG: unable to handle kernel ");
if (address < PAGE_SIZE)
printk(KERN_CONT "NULL pointer dereference");
else
printk(KERN_CONT "paging request");
printk(KERN_CONT " at %p\n", (void *) address);
printk(KERN_ALERT "IP:");
x86/dumpstack: Fix printk_address for direct addresses Consider a kernel crash in a module, simulated the following way: static int my_init(void) { char *map = (void *)0x5; *map = 3; return 0; } module_init(my_init); When we turn off FRAME_POINTERs, the very first instruction in that function causes a BUG. The problem is that we print IP in the BUG report using %pB (from printk_address). And %pB decrements the pointer by one to fix printing addresses of functions with tail calls. This was added in commit 71f9e59800e5ad4 ("x86, dumpstack: Use %pB format specifier for stack trace") to fix the call stack printouts. So instead of correct output: BUG: unable to handle kernel NULL pointer dereference at 0000000000000005 IP: [<ffffffffa01ac000>] my_init+0x0/0x10 [pb173] We get: BUG: unable to handle kernel NULL pointer dereference at 0000000000000005 IP: [<ffffffffa0152000>] 0xffffffffa0151fff To fix that, we use %pS only for stack addresses printouts (via newly added printk_stack_address) and %pB for regs->ip (via printk_address). I.e. we revert to the old behaviour for all except call stacks. And since from all those reliable is 1, we remove that parameter from printk_address. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: joe@perches.com Cc: jirislaby@gmail.com Link: http://lkml.kernel.org/r/1382706418-8435-1-git-send-email-jslaby@suse.cz Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-25 21:06:58 +08:00
printk_address(regs->ip);
dump_pagetable(address);
}
static noinline void
pgtable_bad(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
{
struct task_struct *tsk;
unsigned long flags;
int sig;
flags = oops_begin();
tsk = current;
sig = SIGKILL;
printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
tsk->comm, address);
dump_pagetable(address);
tsk->thread.cr2 = address;
tsk->thread.trap_nr = X86_TRAP_PF;
tsk->thread.error_code = error_code;
if (__die("Bad pagetable", regs, error_code))
sig = 0;
oops_end(flags, regs, sig);
}
static noinline void
no_context(struct pt_regs *regs, unsigned long error_code,
unsigned long address, int signal, int si_code)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
{
struct task_struct *tsk = current;
unsigned long flags;
int sig;
/* Are we prepared to handle this kernel fault? */
if (fixup_exception(regs)) {
/*
* Any interrupt that takes a fault gets the fixup. This makes
* the below recursive fault logic only apply to a faults from
* task context.
*/
if (in_interrupt())
return;
/*
* Per the above we're !in_interrupt(), aka. task context.
*
* In this case we need to make sure we're not recursively
* faulting through the emulate_vsyscall() logic.
*/
if (current_thread_info()->sig_on_uaccess_error && signal) {
tsk->thread.trap_nr = X86_TRAP_PF;
tsk->thread.error_code = error_code | PF_USER;
tsk->thread.cr2 = address;
/* XXX: hwpoison faults will set the wrong code. */
force_sig_info_fault(signal, si_code, address, tsk, 0);
}
/*
* Barring that, we can do the fixup and be happy.
*/
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
return;
}
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
/*
* 32-bit:
*
* Valid to do another page fault here, because if this fault
* had been triggered by is_prefetch fixup_exception would have
* handled it.
*
* 64-bit:
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
*
* Hall of shame of CPU/BIOS bugs.
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
*/
if (is_prefetch(regs, error_code, address))
return;
if (is_errata93(regs, address))
return;
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice:
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
*/
flags = oops_begin();
show_fault_oops(regs, error_code, address);
if (task_stack_end_corrupted(tsk))
bugs, x86: Fix printk levels for panic, softlockups and stack dumps rsyslog will display KERN_EMERG messages on a connected terminal. However, these messages are useless/undecipherable for a general user. For example, after a softlockup we get: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Stack: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Call Trace: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89 d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89 This happens because the printk levels for these messages are incorrect. Only an informational message should be displayed on a terminal. I modified the printk levels for various messages in the kernel and tested the output by using the drivers/misc/lkdtm.c kernel modules (ie, softlockups, panics, hard lockups, etc.) and confirmed that the console output was still the same and that the output to the terminals was correct. For example, in the case of a softlockup we now see the much more informative: Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ... BUG: soft lockup - CPU4 stuck for 60s! instead of the above confusing messages. AFAICT, the messages no longer have to be KERN_EMERG. In the most important case of a panic we set console_verbose(). As for the other less severe cases the correct data is output to the console and /var/log/messages. Successfully tested by me using the drivers/misc/lkdtm.c module. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: dzickus@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:55:34 +08:00
printk(KERN_EMERG "Thread overran stack, or stack corrupted\n");
tsk->thread.cr2 = address;
tsk->thread.trap_nr = X86_TRAP_PF;
tsk->thread.error_code = error_code;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
sig = SIGKILL;
if (__die("Oops", regs, error_code))
sig = 0;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
/* Executive summary in case the body of the oops scrolled away */
bugs, x86: Fix printk levels for panic, softlockups and stack dumps rsyslog will display KERN_EMERG messages on a connected terminal. However, these messages are useless/undecipherable for a general user. For example, after a softlockup we get: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Stack: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Call Trace: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89 d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89 This happens because the printk levels for these messages are incorrect. Only an informational message should be displayed on a terminal. I modified the printk levels for various messages in the kernel and tested the output by using the drivers/misc/lkdtm.c kernel modules (ie, softlockups, panics, hard lockups, etc.) and confirmed that the console output was still the same and that the output to the terminals was correct. For example, in the case of a softlockup we now see the much more informative: Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ... BUG: soft lockup - CPU4 stuck for 60s! instead of the above confusing messages. AFAICT, the messages no longer have to be KERN_EMERG. In the most important case of a panic we set console_verbose(). As for the other less severe cases the correct data is output to the console and /var/log/messages. Successfully tested by me using the drivers/misc/lkdtm.c module. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: dzickus@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:55:34 +08:00
printk(KERN_DEFAULT "CR2: %016lx\n", address);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
oops_end(flags, regs, sig);
}
/*
* Print out info about fatal segfaults, if the show_unhandled_signals
* sysctl is set:
*/
static inline void
show_signal_msg(struct pt_regs *regs, unsigned long error_code,
unsigned long address, struct task_struct *tsk)
{
if (!unhandled_signal(tsk, SIGSEGV))
return;
if (!printk_ratelimit())
return;
printk("%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
tsk->comm, task_pid_nr(tsk), address,
(void *)regs->ip, (void *)regs->sp, error_code);
print_vma_addr(KERN_CONT " in ", regs->ip);
printk(KERN_CONT "\n");
}
static void
__bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
unsigned long address, int si_code)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
{
struct task_struct *tsk = current;
/* User mode accesses just cause a SIGSEGV */
if (error_code & PF_USER) {
/*
* It's possible to have interrupts off here:
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
*/
local_irq_enable();
/*
* Valid to do another page fault here because this one came
* from user space:
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
*/
if (is_prefetch(regs, error_code, address))
return;
if (is_errata100(regs, address))
return;
#ifdef CONFIG_X86_64
/*
* Instruction fetch faults in the vsyscall page might need
* emulation.
*/
if (unlikely((error_code & PF_INSTR) &&
((address & ~0xfff) == VSYSCALL_ADDR))) {
if (emulate_vsyscall(regs, address))
return;
}
#endif
/* Kernel addresses are always protection faults: */
if (address >= TASK_SIZE)
error_code |= PF_PROT;
if (likely(show_unhandled_signals))
show_signal_msg(regs, error_code, address, tsk);
tsk->thread.cr2 = address;
tsk->thread.error_code = error_code;
tsk->thread.trap_nr = X86_TRAP_PF;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
force_sig_info_fault(SIGSEGV, si_code, address, tsk, 0);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
return;
}
if (is_f00f_bug(regs, address))
return;
no_context(regs, error_code, address, SIGSEGV, si_code);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
}
static noinline void
bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
{
__bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR);
}
static void
__bad_area(struct pt_regs *regs, unsigned long error_code,
unsigned long address, int si_code)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
{
struct mm_struct *mm = current->mm;
/*
* Something tried to access memory that isn't in our memory map..
* Fix it, but check if it's kernel or user first..
*/
up_read(&mm->mmap_sem);
__bad_area_nosemaphore(regs, error_code, address, si_code);
}
static noinline void
bad_area(struct pt_regs *regs, unsigned long error_code, unsigned long address)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
{
__bad_area(regs, error_code, address, SEGV_MAPERR);
}
static noinline void
bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
{
__bad_area(regs, error_code, address, SEGV_ACCERR);
}
static void
do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
unsigned int fault)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
{
struct task_struct *tsk = current;
int code = BUS_ADRERR;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
/* Kernel mode? Handle exceptions or die: */
if (!(error_code & PF_USER)) {
no_context(regs, error_code, address, SIGBUS, BUS_ADRERR);
return;
}
/* User-space => ok to do another page fault: */
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
if (is_prefetch(regs, error_code, address))
return;
tsk->thread.cr2 = address;
tsk->thread.error_code = error_code;
tsk->thread.trap_nr = X86_TRAP_PF;
#ifdef CONFIG_MEMORY_FAILURE
if (fault & (VM_FAULT_HWPOISON|VM_FAULT_HWPOISON_LARGE)) {
printk(KERN_ERR
"MCE: Killing %s:%d due to hardware memory corruption fault at %lx\n",
tsk->comm, tsk->pid, address);
code = BUS_MCEERR_AR;
}
#endif
force_sig_info_fault(SIGBUS, code, address, tsk, fault);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
}
static noinline void
mm_fault_error(struct pt_regs *regs, unsigned long error_code,
unsigned long address, unsigned int fault)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
{
if (fatal_signal_pending(current) && !(error_code & PF_USER)) {
no_context(regs, error_code, address, 0, 0);
return;
}
if (fault & VM_FAULT_OOM) {
/* Kernel mode? Handle exceptions or die: */
if (!(error_code & PF_USER)) {
no_context(regs, error_code, address,
SIGSEGV, SEGV_MAPERR);
return;
}
/*
* We ran out of memory, call the OOM killer, and return the
* userspace (which will retry the fault, or kill us if we got
* oom-killed):
*/
pagefault_out_of_memory();
} else {
if (fault & (VM_FAULT_SIGBUS|VM_FAULT_HWPOISON|
VM_FAULT_HWPOISON_LARGE))
do_sigbus(regs, error_code, address, fault);
vm: add VM_FAULT_SIGSEGV handling support The core VM already knows about VM_FAULT_SIGBUS, but cannot return a "you should SIGSEGV" error, because the SIGSEGV case was generally handled by the caller - usually the architecture fault handler. That results in lots of duplication - all the architecture fault handlers end up doing very similar "look up vma, check permissions, do retries etc" - but it generally works. However, there are cases where the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV. In particular, when accessing the stack guard page, libsigsegv expects a SIGSEGV. And it usually got one, because the stack growth is handled by that duplicated architecture fault handler. However, when the generic VM layer started propagating the error return from the stack expansion in commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page"), that now exposed the existing VM_FAULT_SIGBUS result to user space. And user space really expected SIGSEGV, not SIGBUS. To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those duplicate architecture fault handlers about it. They all already have the code to handle SIGSEGV, so it's about just tying that new return value to the existing code, but it's all a bit annoying. This is the mindless minimal patch to do this. A more extensive patch would be to try to gather up the mostly shared fault handling logic into one generic helper routine, and long-term we really should do that cleanup. Just from this patch, you can generally see that most architectures just copied (directly or indirectly) the old x86 way of doing things, but in the meantime that original x86 model has been improved to hold the VM semaphore for shorter times etc and to handle VM_FAULT_RETRY and other "newer" things, so it would be a good idea to bring all those improvements to the generic case and teach other architectures about them too. Reported-and-tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-30 02:51:32 +08:00
else if (fault & VM_FAULT_SIGSEGV)
bad_area_nosemaphore(regs, error_code, address);
else
BUG();
}
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
}
static int spurious_fault_check(unsigned long error_code, pte_t *pte)
{
if ((error_code & PF_WRITE) && !pte_write(*pte))
return 0;
if ((error_code & PF_INSTR) && !pte_exec(*pte))
return 0;
/*
* Note: We do not do lazy flushing on protection key
* changes, so no spurious fault will ever set PF_PK.
*/
if ((error_code & PF_PK))
return 1;
return 1;
}
/*
* Handle a spurious fault caused by a stale TLB entry.
*
* This allows us to lazily refresh the TLB when increasing the
* permissions of a kernel page (RO -> RW or NX -> X). Doing it
* eagerly is very expensive since that implies doing a full
* cross-processor TLB flush, even if no stale TLB entries exist
* on other processors.
*
x86: skip check for spurious faults for non-present faults If a fault on a kernel address is due to a non-present page, then it cannot be the result of stale TLB entry from a protection change (RO to RW or NX to X). Thus the pagetable walk in spurious_fault() can be skipped. See the initial if in spurious_fault() and the tests in spurious_fault_check()) for the set of possible error codes checked for spurious faults. These are: IRUWP Before x00xx && ( 1xxxx || xxx1x ) After ( 10001 || 00011 ) && ( 1xxxx || xxx1x ) Thus the new condition is a subset of the previous one, excluding only non-present faults (I == 1 and W == 1 are mutually exclusive). This avoids spurious_fault() oopsing in some cases if the pagetables it attempts to walk are not accessible. This obscures the location of the original fault. This also fixes a crash with Xen PV guests when they access entries in the M2P corresponding to device MMIO regions. The M2P is mapped (read-only) by Xen into the kernel address space of the guest and this mapping may contains holes for non-RAM regions. Read faults will result in calls to spurious_fault(), but because the page tables for the M2P mappings are not accessible by the guest the pagetable walk would fault. This was not normally a problem as MMIO mappings would not normally result in a M2P lookup because of the use of the _PAGE_IOMAP bit the PTE. However, removing the _PAGE_IOMAP bit requires M2P lookups for MMIO mappings as well. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2014-04-11 01:46:45 +08:00
* Spurious faults may only occur if the TLB contains an entry with
* fewer permission than the page table entry. Non-present (P = 0)
* and reserved bit (R = 1) faults are never spurious.
*
* There are no security implications to leaving a stale TLB when
* increasing the permissions on a page.
x86: skip check for spurious faults for non-present faults If a fault on a kernel address is due to a non-present page, then it cannot be the result of stale TLB entry from a protection change (RO to RW or NX to X). Thus the pagetable walk in spurious_fault() can be skipped. See the initial if in spurious_fault() and the tests in spurious_fault_check()) for the set of possible error codes checked for spurious faults. These are: IRUWP Before x00xx && ( 1xxxx || xxx1x ) After ( 10001 || 00011 ) && ( 1xxxx || xxx1x ) Thus the new condition is a subset of the previous one, excluding only non-present faults (I == 1 and W == 1 are mutually exclusive). This avoids spurious_fault() oopsing in some cases if the pagetables it attempts to walk are not accessible. This obscures the location of the original fault. This also fixes a crash with Xen PV guests when they access entries in the M2P corresponding to device MMIO regions. The M2P is mapped (read-only) by Xen into the kernel address space of the guest and this mapping may contains holes for non-RAM regions. Read faults will result in calls to spurious_fault(), but because the page tables for the M2P mappings are not accessible by the guest the pagetable walk would fault. This was not normally a problem as MMIO mappings would not normally result in a M2P lookup because of the use of the _PAGE_IOMAP bit the PTE. However, removing the _PAGE_IOMAP bit requires M2P lookups for MMIO mappings as well. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2014-04-11 01:46:45 +08:00
*
* Returns non-zero if a spurious fault was handled, zero otherwise.
*
* See Intel Developer's Manual Vol 3 Section 4.10.4.3, bullet 3
* (Optional Invalidation).
*/
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
static noinline int
spurious_fault(unsigned long error_code, unsigned long address)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
int ret;
x86: skip check for spurious faults for non-present faults If a fault on a kernel address is due to a non-present page, then it cannot be the result of stale TLB entry from a protection change (RO to RW or NX to X). Thus the pagetable walk in spurious_fault() can be skipped. See the initial if in spurious_fault() and the tests in spurious_fault_check()) for the set of possible error codes checked for spurious faults. These are: IRUWP Before x00xx && ( 1xxxx || xxx1x ) After ( 10001 || 00011 ) && ( 1xxxx || xxx1x ) Thus the new condition is a subset of the previous one, excluding only non-present faults (I == 1 and W == 1 are mutually exclusive). This avoids spurious_fault() oopsing in some cases if the pagetables it attempts to walk are not accessible. This obscures the location of the original fault. This also fixes a crash with Xen PV guests when they access entries in the M2P corresponding to device MMIO regions. The M2P is mapped (read-only) by Xen into the kernel address space of the guest and this mapping may contains holes for non-RAM regions. Read faults will result in calls to spurious_fault(), but because the page tables for the M2P mappings are not accessible by the guest the pagetable walk would fault. This was not normally a problem as MMIO mappings would not normally result in a M2P lookup because of the use of the _PAGE_IOMAP bit the PTE. However, removing the _PAGE_IOMAP bit requires M2P lookups for MMIO mappings as well. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2014-04-11 01:46:45 +08:00
/*
* Only writes to RO or instruction fetches from NX may cause
* spurious faults.
*
* These could be from user or supervisor accesses but the TLB
* is only lazily flushed after a kernel mapping protection
* change, so user accesses are not expected to cause spurious
* faults.
*/
if (error_code != (PF_WRITE | PF_PROT)
&& error_code != (PF_INSTR | PF_PROT))
return 0;
pgd = init_mm.pgd + pgd_index(address);
if (!pgd_present(*pgd))
return 0;
pud = pud_offset(pgd, address);
if (!pud_present(*pud))
return 0;
if (pud_large(*pud))
return spurious_fault_check(error_code, (pte_t *) pud);
pmd = pmd_offset(pud, address);
if (!pmd_present(*pmd))
return 0;
if (pmd_large(*pmd))
return spurious_fault_check(error_code, (pte_t *) pmd);
pte = pte_offset_kernel(pmd, address);
Revert "x86, mm: Make spurious_fault check explicitly check explicitly check the PRESENT bit" I got a report for a minor regression introduced by commit 027ef6c87853b ("mm: thp: fix pmd_present for split_huge_page and PROT_NONE with THP"). So the problem is, pageattr creates kernel pagetables (pte and pmds) that breaks pte_present/pmd_present and the patch above exposed this invariant breakage for pmd_present. The same problem already existed for the pte and pte_present and it was fixed by commit 660a293ea9be709 ("x86, mm: Make spurious_fault check explicitly check the PRESENT bit") (if it wasn't for that commit, it wouldn't even be a regression). That fix avoids the pagefault to use pte_present. I could follow through by stopping using pmd_present/pmd_huge too. However I think it's more robust to fix pageattr and to clear the PSE/GLOBAL bitflags too in addition to the present bitflag. So the kernel page fault can keep using the regular pte_present/pmd_present/pmd_huge. The confusion arises because _PAGE_GLOBAL and _PAGE_PROTNONE are sharing the same bit, and in the pmd case we pretend _PAGE_PSE to be set only in present pmds (to facilitate split_huge_page final tlb flush). Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Shaohua Li <shaohua.li@intel.com> Cc: "H. Peter Anvin" <hpa@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-23 07:11:49 +08:00
if (!pte_present(*pte))
return 0;
ret = spurious_fault_check(error_code, pte);
if (!ret)
return 0;
/*
* Make sure we have permissions in PMD.
* If not, then there's a bug in the page tables:
*/
ret = spurious_fault_check(error_code, (pte_t *) pmd);
WARN_ONCE(!ret, "PMD has incorrect permission bits\n");
return ret;
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
NOKPROBE_SYMBOL(spurious_fault);
int show_unhandled_signals = 1;
static inline int
access_error(unsigned long error_code, struct vm_area_struct *vma)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
{
if (error_code & PF_WRITE) {
/* write, present and write, not present: */
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
if (unlikely(!(vma->vm_flags & VM_WRITE)))
return 1;
return 0;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
}
/* read, present: */
if (unlikely(error_code & PF_PROT))
return 1;
/* read, not present: */
if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
return 1;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
return 0;
}
static int fault_in_kernel_space(unsigned long address)
{
return address >= TASK_SIZE_MAX;
}
static inline bool smap_violation(int error_code, struct pt_regs *regs)
{
if (!IS_ENABLED(CONFIG_X86_SMAP))
return false;
if (!static_cpu_has(X86_FEATURE_SMAP))
return false;
if (error_code & PF_USER)
return false;
if (!user_mode(regs) && (regs->flags & X86_EFLAGS_AC))
return false;
return true;
}
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*
* This function must have noinline because both callers
* {,trace_}do_page_fault() have notrace on. Having this an actual function
* guarantees there's a function trace entry.
*/
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
static noinline void
__do_page_fault(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
{
struct vm_area_struct *vma;
struct task_struct *tsk;
struct mm_struct *mm;
int fault, major = 0;
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
tsk = current;
mm = tsk->mm;
/*
* Detect and handle instructions that would cause a page fault for
* both a tracked kernel page and a userspace page.
*/
if (kmemcheck_active(regs))
kmemcheck_hide(regs);
x86: mm: Read cr2 before prefetching the mmap_lock Prefetch instructions can generate spurious faults on certain models of older CPUs. The faults themselves cannot be stopped and they can occur pretty much anywhere - so the way we solve them is that we detect certain patterns and ignore the fault. There is one small path of code where we must not take faults though: the #PF handler execution leading up to the reading of the CR2 (the faulting address). If we take a fault there then we destroy the CR2 value (with that of the prefetching instruction's) and possibly mishandle user-space or kernel-space pagefaults. It turns out that in current upstream we do exactly that: prefetchw(&mm->mmap_sem); /* Get the faulting address: */ address = read_cr2(); This is not good. So turn around the order: first read the cr2 then prefetch the lock address. Reading cr2 is plenty fast (2 cycles) so delaying the prefetch by this amount shouldnt be a big issue performance-wise. [ And this might explain a mystery fault.c warning that sometimes occurs on one an old AMD/Semptron based test-system i have - which does have such prefetch problems. ] Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <npiggin@suse.de> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> LKML-Reference: <20090616030522.GA22162@Krystal> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-16 16:23:32 +08:00
prefetchw(&mm->mmap_sem);
x86: mmiotrace full patch, preview 1 kmmio.c handles the list of mmio probes with callbacks, list of traced pages, and attaching into the page fault handler and die notifier. It arms, traps and disarms the given pages, this is the core of mmiotrace. mmio-mod.c is a user interface, hooking into ioremap functions and registering the mmio probes. It also decodes the required information from trapped mmio accesses via the pre and post callbacks in each probe. Currently, hooking into ioremap functions works by redefining the symbols of the target (binary) kernel module, so that it calls the traced versions of the functions. The most notable changes done since the last discussion are: - kmmio.c is a built-in, not part of the module - direct call from fault.c to kmmio.c, removing all dynamic hooks - prepare for unregistering probes at any time - make kmmio re-initializable and accessible to more than one user - rewrite kmmio locking to remove all spinlocks from page fault path Can I abuse call_rcu() like I do in kmmio.c:unregister_kmmio_probe() or is there a better way? The function called via call_rcu() itself calls call_rcu() again, will this work or break? There I need a second grace period for RCU after the first grace period for page faults. Mmiotrace itself (mmio-mod.c) is still a module, I am going to attack that next. At some point I will start looking into how to make mmiotrace a tracer component of ftrace (thanks for the hint, Ingo). Ftrace should make the user space part of mmiotracing as simple as 'cat /debug/trace/mmio > dump.txt'. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 03:20:57 +08:00
if (unlikely(kmmio_fault(regs, address)))
return;
/*
* We fault-in kernel-space virtual memory on-demand. The
* 'reference' page table is init_mm.pgd.
*
* NOTE! We MUST NOT take any locks for this case. We may
* be in an interrupt or a critical region, and should
* only copy the information from the master page table,
* nothing more.
*
* This verifies that the fault happens in kernel space
* (error_code & 4) == 0, and that the fault was not a
* protection error (error_code & 9) == 0.
*/
if (unlikely(fault_in_kernel_space(address))) {
if (!(error_code & (PF_RSVD | PF_USER | PF_PROT))) {
if (vmalloc_fault(address) >= 0)
return;
if (kmemcheck_fault(regs, address, error_code))
return;
}
/* Can handle a stale RO->RW TLB: */
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
if (spurious_fault(error_code, address))
return;
/* kprobes don't want to hook the spurious faults: */
if (kprobes_fault(regs))
return;
/*
* Don't take the mm semaphore here. If we fixup a prefetch
* fault we could otherwise deadlock:
*/
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
bad_area_nosemaphore(regs, error_code, address);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
return;
}
/* kprobes don't want to hook the spurious faults: */
if (unlikely(kprobes_fault(regs)))
return;
if (unlikely(error_code & PF_RSVD))
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
pgtable_bad(regs, error_code, address);
if (unlikely(smap_violation(error_code, regs))) {
bad_area_nosemaphore(regs, error_code, address);
return;
}
/*
* If we're in an interrupt, have no user context or are running
mm/fault, arch: Use pagefault_disable() to check for disabled pagefaults in the handler Introduce faulthandler_disabled() and use it to check for irq context and disabled pagefaults (via pagefault_disable()) in the pagefault handlers. Please note that we keep the in_atomic() checks in place - to detect whether in irq context (in which case preemption is always properly disabled). In contrast, preempt_disable() should never be used to disable pagefaults. With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt counter, and therefore the result of in_atomic() differs. We validate that condition by using might_fault() checks when calling might_sleep(). Therefore, add a comment to faulthandler_disabled(), describing why this is needed. faulthandler_disabled() and pagefault_disable() are defined in linux/uaccess.h, so let's properly add that include to all relevant files. This patch is based on a patch from Thomas Gleixner. Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 23:52:11 +08:00
* in a region with pagefaults disabled then we must not take the fault
*/
mm/fault, arch: Use pagefault_disable() to check for disabled pagefaults in the handler Introduce faulthandler_disabled() and use it to check for irq context and disabled pagefaults (via pagefault_disable()) in the pagefault handlers. Please note that we keep the in_atomic() checks in place - to detect whether in irq context (in which case preemption is always properly disabled). In contrast, preempt_disable() should never be used to disable pagefaults. With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt counter, and therefore the result of in_atomic() differs. We validate that condition by using might_fault() checks when calling might_sleep(). Therefore, add a comment to faulthandler_disabled(), describing why this is needed. faulthandler_disabled() and pagefault_disable() are defined in linux/uaccess.h, so let's properly add that include to all relevant files. This patch is based on a patch from Thomas Gleixner. Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 23:52:11 +08:00
if (unlikely(faulthandler_disabled() || !mm)) {
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
bad_area_nosemaphore(regs, error_code, address);
return;
}
/*
* It's safe to allow irq's after cr2 has been saved and the
* vmalloc fault has been handled.
*
* User-mode registers count as a user access even for any
* potential system fault or CPU buglet:
*/
if (user_mode(regs)) {
local_irq_enable();
error_code |= PF_USER;
flags |= FAULT_FLAG_USER;
} else {
if (regs->flags & X86_EFLAGS_IF)
local_irq_enable();
}
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
if (error_code & PF_WRITE)
flags |= FAULT_FLAG_WRITE;
/*
* When running in the kernel we expect faults to occur only to
* addresses in user space. All other faults represent errors in
* the kernel and should generate an OOPS. Unfortunately, in the
* case of an erroneous fault occurring in a code path which already
* holds mmap_sem we will deadlock attempting to validate the fault
* against the address space. Luckily the kernel only validly
* references user space from well defined areas of code, which are
* listed in the exceptions table.
*
* As the vast majority of faults will be valid we will only perform
* the source reference check when there is a possibility of a
* deadlock. Attempt to lock the address space, if we cannot we then
* validate the source. If this is invalid we can skip the address
* space check, thus avoiding the deadlock:
*/
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
if ((error_code & PF_USER) == 0 &&
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
!search_exception_tables(regs->ip)) {
bad_area_nosemaphore(regs, error_code, address);
return;
}
mm: retry page fault when blocking on disk transfer This change reduces mmap_sem hold times that are caused by waiting for disk transfers when accessing file mapped VMAs. It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call site wants mmap_sem to be released if blocking on a pending disk transfer. In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and do_page_fault() will then re-acquire mmap_sem and retry the page fault. It is expected that the retry will hit the same page which will now be cached, and thus it will complete with a low mmap_sem hold time. Tests: - microbenchmark: thread A mmaps a large file and does random read accesses to the mmaped area - achieves about 55 iterations/s. Thread B does mmap/munmap in a loop at a separate location - achieves 55 iterations/s before, 15000 iterations/s after. - We are seeing related effects in some applications in house, which show significant performance regressions when running without this change. [akpm@linux-foundation.org: fix warning & crash] Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 05:21:57 +08:00
retry:
down_read(&mm->mmap_sem);
} else {
/*
* The above down_read_trylock() might have succeeded in
* which case we'll have missed the might_sleep() from
* down_read():
*/
might_sleep();
}
vma = find_vma(mm, address);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
if (unlikely(!vma)) {
bad_area(regs, error_code, address);
return;
}
if (likely(vma->vm_start <= address))
goto good_area;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
bad_area(regs, error_code, address);
return;
}
if (error_code & PF_USER) {
/*
* Accessing the stack below %sp is always a bug.
* The large cushion allows instructions like enter
* and pusha to work. ("enter $65535, $31" pushes
* 32 pointers and then decrements %sp by 65535.)
*/
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
if (unlikely(address + 65536 + 32 * sizeof(unsigned long) < regs->sp)) {
bad_area(regs, error_code, address);
return;
}
}
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
if (unlikely(expand_stack(vma, address))) {
bad_area(regs, error_code, address);
return;
}
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
good_area:
if (unlikely(access_error(error_code, vma))) {
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 11:24:26 +08:00
bad_area_access_error(regs, error_code, address);
return;
}
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault. Since we never set FAULT_FLAG_RETRY_NOWAIT, if
* we get VM_FAULT_RETRY back, the mmap_sem has been unlocked.
*/
mm: retry page fault when blocking on disk transfer This change reduces mmap_sem hold times that are caused by waiting for disk transfers when accessing file mapped VMAs. It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call site wants mmap_sem to be released if blocking on a pending disk transfer. In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and do_page_fault() will then re-acquire mmap_sem and retry the page fault. It is expected that the retry will hit the same page which will now be cached, and thus it will complete with a low mmap_sem hold time. Tests: - microbenchmark: thread A mmaps a large file and does random read accesses to the mmaped area - achieves about 55 iterations/s. Thread B does mmap/munmap in a loop at a separate location - achieves 55 iterations/s before, 15000 iterations/s after. - We are seeing related effects in some applications in house, which show significant performance regressions when running without this change. [akpm@linux-foundation.org: fix warning & crash] Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 05:21:57 +08:00
fault = handle_mm_fault(mm, vma, address, flags);
major |= fault & VM_FAULT_MAJOR;
/*
* If we need to retry the mmap_sem has already been released,
* and if there is a fatal signal pending there is no guarantee
* that we made any progress. Handle this case first.
*/
if (unlikely(fault & VM_FAULT_RETRY)) {
/* Retry at most once */
if (flags & FAULT_FLAG_ALLOW_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
flags |= FAULT_FLAG_TRIED;
if (!fatal_signal_pending(tsk))
goto retry;
}
/* User mode? Just return to handle the fatal exception */
if (flags & FAULT_FLAG_USER)
return;
/* Not returning to user mode? Handle exceptions or die: */
no_context(regs, error_code, address, SIGBUS, BUS_ADRERR);
return;
}
up_read(&mm->mmap_sem);
if (unlikely(fault & VM_FAULT_ERROR)) {
mm_fault_error(regs, error_code, address, fault);
return;
}
mm: retry page fault when blocking on disk transfer This change reduces mmap_sem hold times that are caused by waiting for disk transfers when accessing file mapped VMAs. It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call site wants mmap_sem to be released if blocking on a pending disk transfer. In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and do_page_fault() will then re-acquire mmap_sem and retry the page fault. It is expected that the retry will hit the same page which will now be cached, and thus it will complete with a low mmap_sem hold time. Tests: - microbenchmark: thread A mmaps a large file and does random read accesses to the mmaped area - achieves about 55 iterations/s. Thread B does mmap/munmap in a loop at a separate location - achieves 55 iterations/s before, 15000 iterations/s after. - We are seeing related effects in some applications in house, which show significant performance regressions when running without this change. [akpm@linux-foundation.org: fix warning & crash] Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 05:21:57 +08:00
/*
* Major/minor page fault accounting. If any of the events
* returned VM_FAULT_MAJOR, we account it as a major fault.
mm: retry page fault when blocking on disk transfer This change reduces mmap_sem hold times that are caused by waiting for disk transfers when accessing file mapped VMAs. It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call site wants mmap_sem to be released if blocking on a pending disk transfer. In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and do_page_fault() will then re-acquire mmap_sem and retry the page fault. It is expected that the retry will hit the same page which will now be cached, and thus it will complete with a low mmap_sem hold time. Tests: - microbenchmark: thread A mmaps a large file and does random read accesses to the mmaped area - achieves about 55 iterations/s. Thread B does mmap/munmap in a loop at a separate location - achieves 55 iterations/s before, 15000 iterations/s after. - We are seeing related effects in some applications in house, which show significant performance regressions when running without this change. [akpm@linux-foundation.org: fix warning & crash] Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 05:21:57 +08:00
*/
if (major) {
tsk->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
} else {
tsk->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
}
check_v8086_mode(regs, address, tsk);
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
NOKPROBE_SYMBOL(__do_page_fault);
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
dotraplinkage void notrace
do_page_fault(struct pt_regs *regs, unsigned long error_code)
{
unsigned long address = read_cr2(); /* Get the faulting address */
2013-02-24 08:19:14 +08:00
enum ctx_state prev_state;
/*
* We must have this function tagged with __kprobes, notrace and call
* read_cr2() before calling anything else. To avoid calling any kind
* of tracing machinery before we've observed the CR2 value.
*
* exception_{enter,exit}() contain all sorts of tracepoints.
*/
2013-02-24 08:19:14 +08:00
prev_state = exception_enter();
__do_page_fault(regs, error_code, address);
2013-02-24 08:19:14 +08:00
exception_exit(prev_state);
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
NOKPROBE_SYMBOL(do_page_fault);
#ifdef CONFIG_TRACING
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
static nokprobe_inline void
trace_page_fault_entries(unsigned long address, struct pt_regs *regs,
unsigned long error_code)
{
if (user_mode(regs))
trace_page_fault_user(address, regs, error_code);
else
trace_page_fault_kernel(address, regs, error_code);
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
dotraplinkage void notrace
trace_do_page_fault(struct pt_regs *regs, unsigned long error_code)
{
/*
* The exception_enter and tracepoint processing could
* trigger another page faults (user space callchain
* reading) and destroy the original cr2 value, so read
* the faulting address now.
*/
unsigned long address = read_cr2();
enum ctx_state prev_state;
prev_state = exception_enter();
trace_page_fault_entries(address, regs, error_code);
__do_page_fault(regs, error_code, address);
exception_exit(prev_state);
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
NOKPROBE_SYMBOL(trace_do_page_fault);
#endif /* CONFIG_TRACING */