linux/fs/ext4/page-io.c

529 lines
14 KiB
C
Raw Normal View History

/*
* linux/fs/ext4/page-io.c
*
* This contains the new page_io functions for ext4
*
* Written by Theodore Ts'o, 2010.
*/
#include <linux/fs.h>
#include <linux/time.h>
#include <linux/highuid.h>
#include <linux/pagemap.h>
#include <linux/quotaops.h>
#include <linux/string.h>
#include <linux/buffer_head.h>
#include <linux/writeback.h>
#include <linux/pagevec.h>
#include <linux/mpage.h>
#include <linux/namei.h>
#include <linux/uio.h>
#include <linux/bio.h>
#include <linux/workqueue.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/backing-dev.h>
#include "ext4_jbd2.h"
#include "xattr.h"
#include "acl.h"
static struct kmem_cache *io_end_cachep;
int __init ext4_init_pageio(void)
{
io_end_cachep = KMEM_CACHE(ext4_io_end, SLAB_RECLAIM_ACCOUNT);
if (io_end_cachep == NULL)
return -ENOMEM;
return 0;
}
void ext4_exit_pageio(void)
{
kmem_cache_destroy(io_end_cachep);
}
/*
* Print an buffer I/O error compatible with the fs/buffer.c. This
* provides compatibility with dmesg scrapers that look for a specific
* buffer I/O error message. We really need a unified error reporting
* structure to userspace ala Digital Unix's uerf system, but it's
* probably not going to happen in my lifetime, due to LKML politics...
*/
static void buffer_io_error(struct buffer_head *bh)
{
printk_ratelimited(KERN_ERR "Buffer I/O error on device %pg, logical block %llu\n",
bh->b_bdev,
(unsigned long long)bh->b_blocknr);
}
static void ext4_finish_bio(struct bio *bio)
{
int i;
struct bio_vec *bvec;
bio_for_each_segment_all(bvec, bio, i) {
struct page *page = bvec->bv_page;
#ifdef CONFIG_EXT4_FS_ENCRYPTION
struct page *data_page = NULL;
struct ext4_crypto_ctx *ctx = NULL;
#endif
struct buffer_head *bh, *head;
unsigned bio_start = bvec->bv_offset;
unsigned bio_end = bio_start + bvec->bv_len;
unsigned under_io = 0;
unsigned long flags;
if (!page)
continue;
#ifdef CONFIG_EXT4_FS_ENCRYPTION
if (!page->mapping) {
/* The bounce data pages are unmapped. */
data_page = page;
ctx = (struct ext4_crypto_ctx *)page_private(data_page);
page = ctx->w.control_page;
}
#endif
if (bio->bi_error) {
SetPageError(page);
set_bit(AS_EIO, &page->mapping->flags);
}
bh = head = page_buffers(page);
/*
* We check all buffers in the page under BH_Uptodate_Lock
* to avoid races with other end io clearing async_write flags
*/
local_irq_save(flags);
bit_spin_lock(BH_Uptodate_Lock, &head->b_state);
do {
if (bh_offset(bh) < bio_start ||
bh_offset(bh) + bh->b_size > bio_end) {
if (buffer_async_write(bh))
under_io++;
continue;
}
clear_buffer_async_write(bh);
if (bio->bi_error)
buffer_io_error(bh);
} while ((bh = bh->b_this_page) != head);
bit_spin_unlock(BH_Uptodate_Lock, &head->b_state);
local_irq_restore(flags);
if (!under_io) {
#ifdef CONFIG_EXT4_FS_ENCRYPTION
if (ctx)
ext4_restore_control_page(data_page);
#endif
end_page_writeback(page);
}
}
}
static void ext4_release_io_end(ext4_io_end_t *io_end)
{
struct bio *bio, *next_bio;
BUG_ON(!list_empty(&io_end->list));
BUG_ON(io_end->flag & EXT4_IO_END_UNWRITTEN);
WARN_ON(io_end->handle);
for (bio = io_end->bio; bio; bio = next_bio) {
next_bio = bio->bi_private;
ext4_finish_bio(bio);
bio_put(bio);
}
kmem_cache_free(io_end_cachep, io_end);
}
/*
* Check a range of space and convert unwritten extents to written. Note that
* we are protected from truncate touching same part of extent tree by the
* fact that truncate code waits for all DIO to finish (thus exclusion from
* direct IO is achieved) and also waits for PageWriteback bits. Thus we
* cannot get to ext4_ext_truncate() before all IOs overlapping that range are
* completed (happens from ext4_free_ioend()).
*/
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
static int ext4_end_io(ext4_io_end_t *io)
{
struct inode *inode = io->inode;
loff_t offset = io->offset;
ssize_t size = io->size;
handle_t *handle = io->handle;
int ret = 0;
ext4_debug("ext4_end_io_nolock: io 0x%p from inode %lu,list->next 0x%p,"
"list->prev 0x%p\n",
io, inode->i_ino, io->list.next, io->list.prev);
io->handle = NULL; /* Following call will use up the handle */
ret = ext4_convert_unwritten_extents(handle, inode, offset, size);
if (ret < 0) {
ext4_msg(inode->i_sb, KERN_EMERG,
"failed to convert unwritten extents to written "
"extents -- potential data loss! "
"(inode %lu, offset %llu, size %zd, error %d)",
inode->i_ino, offset, size, ret);
}
ext4_clear_io_unwritten_flag(io);
ext4_release_io_end(io);
return ret;
}
static void dump_completed_IO(struct inode *inode, struct list_head *head)
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
{
#ifdef EXT4FS_DEBUG
struct list_head *cur, *before, *after;
ext4_io_end_t *io, *io0, *io1;
if (list_empty(head))
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
return;
ext4_debug("Dump inode %lu completed io list\n", inode->i_ino);
list_for_each_entry(io, head, list) {
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
cur = &io->list;
before = cur->prev;
io0 = container_of(before, ext4_io_end_t, list);
after = cur->next;
io1 = container_of(after, ext4_io_end_t, list);
ext4_debug("io 0x%p from inode %lu,prev 0x%p,next 0x%p\n",
io, inode->i_ino, io0, io1);
}
#endif
}
/* Add the io_end to per-inode completed end_io list. */
static void ext4_add_complete_io(ext4_io_end_t *io_end)
{
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
struct ext4_inode_info *ei = EXT4_I(io_end->inode);
struct ext4_sb_info *sbi = EXT4_SB(io_end->inode->i_sb);
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
struct workqueue_struct *wq;
unsigned long flags;
/* Only reserved conversions from writeback should enter here */
WARN_ON(!(io_end->flag & EXT4_IO_END_UNWRITTEN));
WARN_ON(!io_end->handle && sbi->s_journal);
spin_lock_irqsave(&ei->i_completed_io_lock, flags);
wq = sbi->rsv_conversion_wq;
if (list_empty(&ei->i_rsv_conversion_list))
queue_work(wq, &ei->i_rsv_conversion_work);
list_add_tail(&io_end->list, &ei->i_rsv_conversion_list);
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
}
static int ext4_do_flush_completed_IO(struct inode *inode,
struct list_head *head)
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
{
ext4_io_end_t *io;
struct list_head unwritten;
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
unsigned long flags;
struct ext4_inode_info *ei = EXT4_I(inode);
int err, ret = 0;
spin_lock_irqsave(&ei->i_completed_io_lock, flags);
dump_completed_IO(inode, head);
list_replace_init(head, &unwritten);
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
while (!list_empty(&unwritten)) {
io = list_entry(unwritten.next, ext4_io_end_t, list);
BUG_ON(!(io->flag & EXT4_IO_END_UNWRITTEN));
list_del_init(&io->list);
err = ext4_end_io(io);
if (unlikely(!ret && err))
ret = err;
}
return ret;
}
/*
* work on completed IO, to convert unwritten extents to extents
ext4: completed_io locking cleanup Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 12:14:55 +08:00
*/
void ext4_end_io_rsv_work(struct work_struct *work)
{
struct ext4_inode_info *ei = container_of(work, struct ext4_inode_info,
i_rsv_conversion_work);
ext4_do_flush_completed_IO(&ei->vfs_inode, &ei->i_rsv_conversion_list);
}
ext4_io_end_t *ext4_init_io_end(struct inode *inode, gfp_t flags)
{
ext4_io_end_t *io = kmem_cache_zalloc(io_end_cachep, flags);
if (io) {
ext4: handle writeback of inodes which are being freed The following BUG can occur when an inode which is getting freed when it still has dirty pages outstanding, and it gets deleted (in this because it was the target of a rename). In ordered mode, we need to make sure the data pages are written just in case we crash before the rename (or unlink) is committed. If the inode is being freed then when we try to igrab the inode, we end up tripping the BUG_ON at fs/ext4/page-io.c:146. To solve this problem, we need to keep track of the number of io callbacks which are pending, and avoid destroying the inode until they have all been completed. That way we don't have to bump the inode count to keep the inode from being destroyed; an approach which doesn't work because the count could have already been dropped down to zero before the inode writeback has started (at which point we're not allowed to bump the count back up to 1, since it's already started getting freed). Thanks to Dave Chinner for suggesting this approach, which is also used by XFS. kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146! Call Trace: [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307 [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2 [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5 [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d [<ffffffff81087910>] do_writepages+0x1c/0x25 [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10 [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2 [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c [<ffffffff810c14a3>] evict+0x22/0x92 [<ffffffff810c1a3d>] iput+0x212/0x249 [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9 [<ffffffff810bdf6b>] d_kill+0x3d/0x5d [<ffffffff810be613>] dput+0x13a/0x147 [<ffffffff810b990d>] sys_renameat+0x1b5/0x258 [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38 [<ffffffff810b99c6>] sys_rename+0x16/0x18 [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b Reported-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Nick Bowler <nbowler@elliptictech.com>
2010-11-09 02:43:33 +08:00
io->inode = inode;
INIT_LIST_HEAD(&io->list);
atomic_set(&io->count, 1);
}
return io;
}
void ext4_put_io_end_defer(ext4_io_end_t *io_end)
{
if (atomic_dec_and_test(&io_end->count)) {
if (!(io_end->flag & EXT4_IO_END_UNWRITTEN) || !io_end->size) {
ext4_release_io_end(io_end);
return;
}
ext4_add_complete_io(io_end);
}
}
int ext4_put_io_end(ext4_io_end_t *io_end)
{
int err = 0;
if (atomic_dec_and_test(&io_end->count)) {
if (io_end->flag & EXT4_IO_END_UNWRITTEN) {
err = ext4_convert_unwritten_extents(io_end->handle,
io_end->inode, io_end->offset,
io_end->size);
io_end->handle = NULL;
ext4_clear_io_unwritten_flag(io_end);
}
ext4_release_io_end(io_end);
}
return err;
}
ext4_io_end_t *ext4_get_io_end(ext4_io_end_t *io_end)
{
atomic_inc(&io_end->count);
return io_end;
}
/* BIO completion function for page writeback */
static void ext4_end_bio(struct bio *bio)
{
ext4_io_end_t *io_end = bio->bi_private;
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 06:44:27 +08:00
sector_t bi_sector = bio->bi_iter.bi_sector;
BUG_ON(!io_end);
bio->bi_end_io = NULL;
if (bio->bi_error) {
struct inode *inode = io_end->inode;
ext4_warning(inode->i_sb, "I/O error %d writing to inode %lu "
ext4: handle writeback of inodes which are being freed The following BUG can occur when an inode which is getting freed when it still has dirty pages outstanding, and it gets deleted (in this because it was the target of a rename). In ordered mode, we need to make sure the data pages are written just in case we crash before the rename (or unlink) is committed. If the inode is being freed then when we try to igrab the inode, we end up tripping the BUG_ON at fs/ext4/page-io.c:146. To solve this problem, we need to keep track of the number of io callbacks which are pending, and avoid destroying the inode until they have all been completed. That way we don't have to bump the inode count to keep the inode from being destroyed; an approach which doesn't work because the count could have already been dropped down to zero before the inode writeback has started (at which point we're not allowed to bump the count back up to 1, since it's already started getting freed). Thanks to Dave Chinner for suggesting this approach, which is also used by XFS. kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146! Call Trace: [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307 [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2 [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5 [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d [<ffffffff81087910>] do_writepages+0x1c/0x25 [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10 [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2 [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c [<ffffffff810c14a3>] evict+0x22/0x92 [<ffffffff810c1a3d>] iput+0x212/0x249 [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9 [<ffffffff810bdf6b>] d_kill+0x3d/0x5d [<ffffffff810be613>] dput+0x13a/0x147 [<ffffffff810b990d>] sys_renameat+0x1b5/0x258 [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38 [<ffffffff810b99c6>] sys_rename+0x16/0x18 [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b Reported-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Nick Bowler <nbowler@elliptictech.com>
2010-11-09 02:43:33 +08:00
"(offset %llu size %ld starting block %llu)",
bio->bi_error, inode->i_ino,
ext4: handle writeback of inodes which are being freed The following BUG can occur when an inode which is getting freed when it still has dirty pages outstanding, and it gets deleted (in this because it was the target of a rename). In ordered mode, we need to make sure the data pages are written just in case we crash before the rename (or unlink) is committed. If the inode is being freed then when we try to igrab the inode, we end up tripping the BUG_ON at fs/ext4/page-io.c:146. To solve this problem, we need to keep track of the number of io callbacks which are pending, and avoid destroying the inode until they have all been completed. That way we don't have to bump the inode count to keep the inode from being destroyed; an approach which doesn't work because the count could have already been dropped down to zero before the inode writeback has started (at which point we're not allowed to bump the count back up to 1, since it's already started getting freed). Thanks to Dave Chinner for suggesting this approach, which is also used by XFS. kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146! Call Trace: [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307 [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2 [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5 [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d [<ffffffff81087910>] do_writepages+0x1c/0x25 [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10 [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2 [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c [<ffffffff810c14a3>] evict+0x22/0x92 [<ffffffff810c1a3d>] iput+0x212/0x249 [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9 [<ffffffff810bdf6b>] d_kill+0x3d/0x5d [<ffffffff810be613>] dput+0x13a/0x147 [<ffffffff810b990d>] sys_renameat+0x1b5/0x258 [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38 [<ffffffff810b99c6>] sys_rename+0x16/0x18 [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b Reported-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Nick Bowler <nbowler@elliptictech.com>
2010-11-09 02:43:33 +08:00
(unsigned long long) io_end->offset,
(long) io_end->size,
(unsigned long long)
2011-02-08 01:46:14 +08:00
bi_sector >> (inode->i_blkbits - 9));
mapping_set_error(inode->i_mapping, bio->bi_error);
ext4: handle writeback of inodes which are being freed The following BUG can occur when an inode which is getting freed when it still has dirty pages outstanding, and it gets deleted (in this because it was the target of a rename). In ordered mode, we need to make sure the data pages are written just in case we crash before the rename (or unlink) is committed. If the inode is being freed then when we try to igrab the inode, we end up tripping the BUG_ON at fs/ext4/page-io.c:146. To solve this problem, we need to keep track of the number of io callbacks which are pending, and avoid destroying the inode until they have all been completed. That way we don't have to bump the inode count to keep the inode from being destroyed; an approach which doesn't work because the count could have already been dropped down to zero before the inode writeback has started (at which point we're not allowed to bump the count back up to 1, since it's already started getting freed). Thanks to Dave Chinner for suggesting this approach, which is also used by XFS. kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146! Call Trace: [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307 [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2 [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5 [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d [<ffffffff81087910>] do_writepages+0x1c/0x25 [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10 [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2 [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c [<ffffffff810c14a3>] evict+0x22/0x92 [<ffffffff810c1a3d>] iput+0x212/0x249 [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9 [<ffffffff810bdf6b>] d_kill+0x3d/0x5d [<ffffffff810be613>] dput+0x13a/0x147 [<ffffffff810b990d>] sys_renameat+0x1b5/0x258 [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38 [<ffffffff810b99c6>] sys_rename+0x16/0x18 [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b Reported-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Nick Bowler <nbowler@elliptictech.com>
2010-11-09 02:43:33 +08:00
}
if (io_end->flag & EXT4_IO_END_UNWRITTEN) {
/*
* Link bio into list hanging from io_end. We have to do it
* atomically as bio completions can be racing against each
* other.
*/
bio->bi_private = xchg(&io_end->bio, bio);
ext4_put_io_end_defer(io_end);
} else {
/*
* Drop io_end reference early. Inode can get freed once
* we finish the bio.
*/
ext4_put_io_end_defer(io_end);
ext4_finish_bio(bio);
bio_put(bio);
}
}
void ext4_io_submit(struct ext4_io_submit *io)
{
struct bio *bio = io->io_bio;
if (bio) {
int io_op = io->io_wbc->sync_mode == WB_SYNC_ALL ?
WRITE_SYNC : WRITE;
bio_get(io->io_bio);
submit_bio(io_op, io->io_bio);
bio_put(io->io_bio);
}
io->io_bio = NULL;
}
void ext4_io_submit_init(struct ext4_io_submit *io,
struct writeback_control *wbc)
{
io->io_wbc = wbc;
io->io_bio = NULL;
io->io_end = NULL;
}
static int io_submit_init_bio(struct ext4_io_submit *io,
struct buffer_head *bh)
{
struct bio *bio;
bio = bio_alloc(GFP_NOIO, BIO_MAX_PAGES);
if (!bio)
return -ENOMEM;
wbc_init_bio(io->io_wbc, bio);
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 06:44:27 +08:00
bio->bi_iter.bi_sector = bh->b_blocknr * (bh->b_size >> 9);
bio->bi_bdev = bh->b_bdev;
bio->bi_end_io = ext4_end_bio;
bio->bi_private = ext4_get_io_end(io->io_end);
io->io_bio = bio;
io->io_next_block = bh->b_blocknr;
return 0;
}
static int io_submit_add_bh(struct ext4_io_submit *io,
struct inode *inode,
struct page *page,
struct buffer_head *bh)
{
int ret;
if (io->io_bio && bh->b_blocknr != io->io_next_block) {
submit_and_retry:
ext4_io_submit(io);
}
if (io->io_bio == NULL) {
ret = io_submit_init_bio(io, bh);
if (ret)
return ret;
}
ret = bio_add_page(io->io_bio, page, bh->b_size, bh_offset(bh));
if (ret != bh->b_size)
goto submit_and_retry;
wbc_account_io(io->io_wbc, page, bh->b_size);
io->io_next_block++;
return 0;
}
int ext4_bio_write_page(struct ext4_io_submit *io,
struct page *page,
int len,
ext4: fix data integrity sync in ordered mode When we perform a data integrity sync we tag all the dirty pages with PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check for this tag in write_cache_pages_da and creates a struct mpage_da_data containing contiguously indexed pages tagged with this tag and sync these pages with a call to mpage_da_map_and_submit. This process is done in while loop until all the PAGECACHE_TAG_TOWRITE pages are synced. We also do journal start and stop in each iteration. journal_stop could initiate journal commit which would call ext4_writepage which in turn will call ext4_bio_write_page even for delayed OR unwritten buffers. When ext4_bio_write_page is called for such buffers, even though it does not sync them but it clears the PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages are also not synced by the currently running data integrity sync. We will end up with dirty pages although sync is completed. This could cause a potential data loss when the sync call is followed by a truncate_pagecache call, which is exactly the case in collapse_range. (It will cause generic/127 failure in xfstests) To avoid this issue, we can use set_page_writeback_keepwrite instead of set_page_writeback, which doesn't clear TOWRITE tag. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2014-05-12 20:12:25 +08:00
struct writeback_control *wbc,
bool keep_towrite)
{
struct page *data_page = NULL;
struct inode *inode = page->mapping->host;
unsigned block_start, blocksize;
struct buffer_head *bh, *head;
int ret = 0;
int nr_submitted = 0;
int nr_to_submit = 0;
blocksize = 1 << inode->i_blkbits;
2011-02-08 01:46:14 +08:00
BUG_ON(!PageLocked(page));
BUG_ON(PageWriteback(page));
ext4: fix data integrity sync in ordered mode When we perform a data integrity sync we tag all the dirty pages with PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check for this tag in write_cache_pages_da and creates a struct mpage_da_data containing contiguously indexed pages tagged with this tag and sync these pages with a call to mpage_da_map_and_submit. This process is done in while loop until all the PAGECACHE_TAG_TOWRITE pages are synced. We also do journal start and stop in each iteration. journal_stop could initiate journal commit which would call ext4_writepage which in turn will call ext4_bio_write_page even for delayed OR unwritten buffers. When ext4_bio_write_page is called for such buffers, even though it does not sync them but it clears the PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages are also not synced by the currently running data integrity sync. We will end up with dirty pages although sync is completed. This could cause a potential data loss when the sync call is followed by a truncate_pagecache call, which is exactly the case in collapse_range. (It will cause generic/127 failure in xfstests) To avoid this issue, we can use set_page_writeback_keepwrite instead of set_page_writeback, which doesn't clear TOWRITE tag. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2014-05-12 20:12:25 +08:00
if (keep_towrite)
set_page_writeback_keepwrite(page);
else
set_page_writeback(page);
ClearPageError(page);
/*
Clean ups and miscellaneous bug fixes, in particular for the new collapse_range and zero_range fallocate functions. In addition, improve the scalability of adding and remove inodes from the orphan list. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABCAAGBQJTk9x7AAoJENNvdpvBGATwQQ4QAN85xkNWWiq0feLGZjUVTre/ JUgRQWXZYVogAQckQoTDXqJt1qKYxO45A8oIoUMI4uzgcFJm7iJIZJAv3Hjd2ftz 48RVwjWHblmBz6e+CdmETpzJUaJr3KXbnk3EDQzagWg3Q64dBU/yT0c4foBO8wfX FI1MNin70r5NGQv6Mp4xNUfMoU6liCrsMO2RWkyxY2rcmxy6tkpNO/NBAPwhmn0e vwKHvnnqKM08Frrt6Lz3MpXGAJ+rhTSvmL+qSRXQn9BcbphdGa4jy+i3HbviRX4N z77UZMgMbfK1V3YHm8KzmmbIHrmIARXUlCM7jp4HPSnb4qhyERrhVmGCJZ8civ6Q 3Cm9WwA93PQDfRX6Kid3K1tR/ql+ryac55o9SM990osrWp4C0IH+P/CdlSN0GspN 3pJTLHUVVcxF6gSnOD+q/JzM8Iudl87Rxb17wA+6eg3AJRaPoQSPJoqtwZ89ZwOz RiZGuugFp7gDOxqo32lJ53fivO/e1zxXxu0dVHHjOnHBVWX063hlcibTg8kvFWg1 7bBvUkvgT5jR+UuDX81wPZ+c0kkmfk4gxT5sHg6RlMKeCYi3uuLmAYgla3AM4j9G GeNNdVTmilH7wMgYB2wxd0C5HofgKgM5YFLZWc0FVSXMeFs5ST2kbLMXAZqzrKPa szHFEJHIGZByXfkP/jix =C1ZV -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Clean ups and miscellaneous bug fixes, in particular for the new collapse_range and zero_range fallocate functions. In addition, improve the scalability of adding and remove inodes from the orphan list" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits) ext4: handle symlink properly with inline_data ext4: fix wrong assert in ext4_mb_normalize_request() ext4: fix zeroing of page during writeback ext4: remove unused local variable "stored" from ext4_readdir(...) ext4: fix ZERO_RANGE test failure in data journalling ext4: reduce contention on s_orphan_lock ext4: use sbi in ext4_orphan_{add|del}() ext4: use EXT_MAX_BLOCKS in ext4_es_can_be_merged() ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access ext4: remove unnecessary double parentheses ext4: do not destroy ext4_groupinfo_caches if ext4_mb_init() fails ext4: make local functions static ext4: fix block bitmap validation when bigalloc, ^flex_bg ext4: fix block bitmap initialization under sparse_super2 ext4: find the group descriptors on a 1k-block bigalloc,meta_bg filesystem ext4: avoid unneeded lookup when xattr name is invalid ext4: fix data integrity sync in ordered mode ext4: remove obsoleted check ext4: add a new spinlock i_raw_lock to protect the ext4's raw inode ext4: fix locking for O_APPEND writes ...
2014-06-09 04:03:35 +08:00
* Comments copied from block_write_full_page:
*
* The page straddles i_size. It must be zeroed out on each and every
* writepage invocation because it may be mmapped. "A file is mapped
* in multiples of the page size. For a file that is not a multiple of
* the page size, the remaining memory is zeroed when mapped, and
* writes to that region are not written out to the file."
*/
if (len < PAGE_CACHE_SIZE)
zero_user_segment(page, len, PAGE_CACHE_SIZE);
/*
* In the first loop we prepare and mark buffers to submit. We have to
* mark all buffers in the page before submitting so that
* end_page_writeback() cannot be called from ext4_bio_end_io() when IO
* on the first buffer finishes and we are still working on submitting
* the second buffer.
*/
bh = head = page_buffers(page);
do {
block_start = bh_offset(bh);
if (block_start >= len) {
clear_buffer_dirty(bh);
set_buffer_uptodate(bh);
continue;
}
if (!buffer_dirty(bh) || buffer_delay(bh) ||
!buffer_mapped(bh) || buffer_unwritten(bh)) {
/* A hole? We can safely clear the dirty bit */
if (!buffer_mapped(bh))
clear_buffer_dirty(bh);
if (io->io_bio)
ext4_io_submit(io);
continue;
}
if (buffer_new(bh)) {
clear_buffer_new(bh);
unmap_underlying_metadata(bh->b_bdev, bh->b_blocknr);
}
set_buffer_async_write(bh);
nr_to_submit++;
} while ((bh = bh->b_this_page) != head);
bh = head = page_buffers(page);
if (ext4_encrypted_inode(inode) && S_ISREG(inode->i_mode) &&
nr_to_submit) {
gfp_t gfp_flags = GFP_NOFS;
retry_encrypt:
data_page = ext4_encrypt(inode, page, gfp_flags);
if (IS_ERR(data_page)) {
ret = PTR_ERR(data_page);
if (ret == ENOMEM && wbc->sync_mode == WB_SYNC_ALL) {
if (io->io_bio) {
ext4_io_submit(io);
congestion_wait(BLK_RW_ASYNC, HZ/50);
}
gfp_flags |= __GFP_NOFAIL;
goto retry_encrypt;
}
data_page = NULL;
goto out;
}
}
/* Now submit buffers to write */
do {
if (!buffer_async_write(bh))
continue;
ret = io_submit_add_bh(io, inode,
data_page ? data_page : page, bh);
if (ret) {
/*
* We only get here on ENOMEM. Not much else
* we can do but mark the page as dirty, and
* better luck next time.
*/
break;
}
nr_submitted++;
clear_buffer_dirty(bh);
} while ((bh = bh->b_this_page) != head);
/* Error stopped previous loop? Clean up buffers... */
if (ret) {
out:
if (data_page)
ext4_restore_control_page(data_page);
printk_ratelimited(KERN_ERR "%s: ret = %d\n", __func__, ret);
redirty_page_for_writepage(wbc, page);
do {
clear_buffer_async_write(bh);
bh = bh->b_this_page;
} while (bh != head);
}
unlock_page(page);
/* Nothing submitted - we have to end page writeback */
if (!nr_submitted)
end_page_writeback(page);
return ret;
}