linux/net/rxrpc/ar-internal.h

1407 lines
48 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-or-later */
/* AF_RXRPC internal definitions
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*/
#include <linux/atomic.h>
#include <linux/seqlock.h>
rxrpc: Fix the excessive initial retransmission timeout rxrpc currently uses a fixed 4s retransmission timeout until the RTT is sufficiently sampled. This can cause problems with some fileservers with calls to the cache manager in the afs filesystem being dropped from the fileserver because a packet goes missing and the retransmission timeout is greater than the call expiry timeout. Fix this by: (1) Copying the RTT/RTO calculation code from Linux's TCP implementation and altering it to fit rxrpc. (2) Altering the various users of the RTT to make use of the new SRTT value. (3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO value instead (which is needed in jiffies), along with a backoff. Notes: (1) rxrpc provides RTT samples by matching the serial numbers on outgoing DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets against the reference serial number in incoming REQUESTED ACK and PING-RESPONSE ACK packets. (2) Each packet that is transmitted on an rxrpc connection gets a new per-connection serial number, even for retransmissions, so an ACK can be cross-referenced to a specific trigger packet. This allows RTT information to be drawn from retransmitted DATA packets also. (3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than on an rxrpc_call because many RPC calls won't live long enough to generate more than one sample. (4) The calculated SRTT value is in units of 8ths of a microsecond rather than nanoseconds. The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers. Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"") Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-11 21:54:34 +08:00
#include <linux/win_minmax.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include <keys/rxrpc-type.h>
#include "protocol.h"
#define FCRYPT_BSIZE 8
struct rxrpc_crypt {
union {
u8 x[FCRYPT_BSIZE];
__be32 n[2];
};
} __attribute__((aligned(8)));
[AF_RXRPC]: Add an interface to the AF_RXRPC module for the AFS filesystem to use Add an interface to the AF_RXRPC module so that the AFS filesystem module can more easily make use of the services available. AFS still opens a socket but then uses the action functions in lieu of sendmsg() and registers an intercept functions to grab messages before they're queued on the socket Rx queue. This permits AFS (or whatever) to: (1) Avoid the overhead of using the recvmsg() call. (2) Use different keys directly on individual client calls on one socket rather than having to open a whole slew of sockets, one for each key it might want to use. (3) Avoid calling request_key() at the point of issue of a call or opening of a socket. This is done instead by AFS at the point of open(), unlink() or other VFS operation and the key handed through. (4) Request the use of something other than GFP_KERNEL to allocate memory. Furthermore: (*) The socket buffer markings used by RxRPC are made available for AFS so that it can interpret the cooked RxRPC messages itself. (*) rxgen (un)marshalling abort codes are made available. The following documentation for the kernel interface is added to Documentation/networking/rxrpc.txt: ========================= AF_RXRPC KERNEL INTERFACE ========================= The AF_RXRPC module also provides an interface for use by in-kernel utilities such as the AFS filesystem. This permits such a utility to: (1) Use different keys directly on individual client calls on one socket rather than having to open a whole slew of sockets, one for each key it might want to use. (2) Avoid having RxRPC call request_key() at the point of issue of a call or opening of a socket. Instead the utility is responsible for requesting a key at the appropriate point. AFS, for instance, would do this during VFS operations such as open() or unlink(). The key is then handed through when the call is initiated. (3) Request the use of something other than GFP_KERNEL to allocate memory. (4) Avoid the overhead of using the recvmsg() call. RxRPC messages can be intercepted before they get put into the socket Rx queue and the socket buffers manipulated directly. To use the RxRPC facility, a kernel utility must still open an AF_RXRPC socket, bind an addess as appropriate and listen if it's to be a server socket, but then it passes this to the kernel interface functions. The kernel interface functions are as follows: (*) Begin a new client call. struct rxrpc_call * rxrpc_kernel_begin_call(struct socket *sock, struct sockaddr_rxrpc *srx, struct key *key, unsigned long user_call_ID, gfp_t gfp); This allocates the infrastructure to make a new RxRPC call and assigns call and connection numbers. The call will be made on the UDP port that the socket is bound to. The call will go to the destination address of a connected client socket unless an alternative is supplied (srx is non-NULL). If a key is supplied then this will be used to secure the call instead of the key bound to the socket with the RXRPC_SECURITY_KEY sockopt. Calls secured in this way will still share connections if at all possible. The user_call_ID is equivalent to that supplied to sendmsg() in the control data buffer. It is entirely feasible to use this to point to a kernel data structure. If this function is successful, an opaque reference to the RxRPC call is returned. The caller now holds a reference on this and it must be properly ended. (*) End a client call. void rxrpc_kernel_end_call(struct rxrpc_call *call); This is used to end a previously begun call. The user_call_ID is expunged from AF_RXRPC's knowledge and will not be seen again in association with the specified call. (*) Send data through a call. int rxrpc_kernel_send_data(struct rxrpc_call *call, struct msghdr *msg, size_t len); This is used to supply either the request part of a client call or the reply part of a server call. msg.msg_iovlen and msg.msg_iov specify the data buffers to be used. msg_iov may not be NULL and must point exclusively to in-kernel virtual addresses. msg.msg_flags may be given MSG_MORE if there will be subsequent data sends for this call. The msg must not specify a destination address, control data or any flags other than MSG_MORE. len is the total amount of data to transmit. (*) Abort a call. void rxrpc_kernel_abort_call(struct rxrpc_call *call, u32 abort_code); This is used to abort a call if it's still in an abortable state. The abort code specified will be placed in the ABORT message sent. (*) Intercept received RxRPC messages. typedef void (*rxrpc_interceptor_t)(struct sock *sk, unsigned long user_call_ID, struct sk_buff *skb); void rxrpc_kernel_intercept_rx_messages(struct socket *sock, rxrpc_interceptor_t interceptor); This installs an interceptor function on the specified AF_RXRPC socket. All messages that would otherwise wind up in the socket's Rx queue are then diverted to this function. Note that care must be taken to process the messages in the right order to maintain DATA message sequentiality. The interceptor function itself is provided with the address of the socket and handling the incoming message, the ID assigned by the kernel utility to the call and the socket buffer containing the message. The skb->mark field indicates the type of message: MARK MEANING =============================== ======================================= RXRPC_SKB_MARK_DATA Data message RXRPC_SKB_MARK_FINAL_ACK Final ACK received for an incoming call RXRPC_SKB_MARK_BUSY Client call rejected as server busy RXRPC_SKB_MARK_REMOTE_ABORT Call aborted by peer RXRPC_SKB_MARK_NET_ERROR Network error detected RXRPC_SKB_MARK_LOCAL_ERROR Local error encountered RXRPC_SKB_MARK_NEW_CALL New incoming call awaiting acceptance The remote abort message can be probed with rxrpc_kernel_get_abort_code(). The two error messages can be probed with rxrpc_kernel_get_error_number(). A new call can be accepted with rxrpc_kernel_accept_call(). Data messages can have their contents extracted with the usual bunch of socket buffer manipulation functions. A data message can be determined to be the last one in a sequence with rxrpc_kernel_is_data_last(). When a data message has been used up, rxrpc_kernel_data_delivered() should be called on it.. Non-data messages should be handled to rxrpc_kernel_free_skb() to dispose of. It is possible to get extra refs on all types of message for later freeing, but this may pin the state of a call until the message is finally freed. (*) Accept an incoming call. struct rxrpc_call * rxrpc_kernel_accept_call(struct socket *sock, unsigned long user_call_ID); This is used to accept an incoming call and to assign it a call ID. This function is similar to rxrpc_kernel_begin_call() and calls accepted must be ended in the same way. If this function is successful, an opaque reference to the RxRPC call is returned. The caller now holds a reference on this and it must be properly ended. (*) Reject an incoming call. int rxrpc_kernel_reject_call(struct socket *sock); This is used to reject the first incoming call on the socket's queue with a BUSY message. -ENODATA is returned if there were no incoming calls. Other errors may be returned if the call had been aborted (-ECONNABORTED) or had timed out (-ETIME). (*) Record the delivery of a data message and free it. void rxrpc_kernel_data_delivered(struct sk_buff *skb); This is used to record a data message as having been delivered and to update the ACK state for the call. The socket buffer will be freed. (*) Free a message. void rxrpc_kernel_free_skb(struct sk_buff *skb); This is used to free a non-DATA socket buffer intercepted from an AF_RXRPC socket. (*) Determine if a data message is the last one on a call. bool rxrpc_kernel_is_data_last(struct sk_buff *skb); This is used to determine if a socket buffer holds the last data message to be received for a call (true will be returned if it does, false if not). The data message will be part of the reply on a client call and the request on an incoming call. In the latter case there will be more messages, but in the former case there will not. (*) Get the abort code from an abort message. u32 rxrpc_kernel_get_abort_code(struct sk_buff *skb); This is used to extract the abort code from a remote abort message. (*) Get the error number from a local or network error message. int rxrpc_kernel_get_error_number(struct sk_buff *skb); This is used to extract the error number from a message indicating either a local error occurred or a network error occurred. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:50:17 +08:00
#define rxrpc_queue_work(WS) queue_work(rxrpc_workqueue, (WS))
#define rxrpc_queue_delayed_work(WS,D) \
queue_delayed_work(rxrpc_workqueue, (WS), (D))
struct key_preparsed_payload;
struct rxrpc_connection;
struct rxrpc_txbuf;
rxrpc: Don't expose skbs to in-kernel users [ver #2] Don't expose skbs to in-kernel users, such as the AFS filesystem, but instead provide a notification hook the indicates that a call needs attention and another that indicates that there's a new call to be collected. This makes the following possibilities more achievable: (1) Call refcounting can be made simpler if skbs don't hold refs to calls. (2) skbs referring to non-data events will be able to be freed much sooner rather than being queued for AFS to pick up as rxrpc_kernel_recv_data will be able to consult the call state. (3) We can shortcut the receive phase when a call is remotely aborted because we don't have to go through all the packets to get to the one cancelling the operation. (4) It makes it easier to do encryption/decryption directly between AFS's buffers and sk_buffs. (5) Encryption/decryption can more easily be done in the AFS's thread contexts - usually that of the userspace process that issued a syscall - rather than in one of rxrpc's background threads on a workqueue. (6) AFS will be able to wait synchronously on a call inside AF_RXRPC. To make this work, the following interface function has been added: int rxrpc_kernel_recv_data( struct socket *sock, struct rxrpc_call *call, void *buffer, size_t bufsize, size_t *_offset, bool want_more, u32 *_abort_code); This is the recvmsg equivalent. It allows the caller to find out about the state of a specific call and to transfer received data into a buffer piecemeal. afs_extract_data() and rxrpc_kernel_recv_data() now do all the extraction logic between them. They don't wait synchronously yet because the socket lock needs to be dealt with. Five interface functions have been removed: rxrpc_kernel_is_data_last() rxrpc_kernel_get_abort_code() rxrpc_kernel_get_error_number() rxrpc_kernel_free_skb() rxrpc_kernel_data_consumed() As a temporary hack, sk_buffs going to an in-kernel call are queued on the rxrpc_call struct (->knlrecv_queue) rather than being handed over to the in-kernel user. To process the queue internally, a temporary function, temp_deliver_data() has been added. This will be replaced with common code between the rxrpc_recvmsg() path and the kernel_rxrpc_recv_data() path in a future patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 03:42:14 +08:00
/*
* Mark applied to socket buffers in skb->mark. skb->priority is used
* to pass supplementary information.
rxrpc: Don't expose skbs to in-kernel users [ver #2] Don't expose skbs to in-kernel users, such as the AFS filesystem, but instead provide a notification hook the indicates that a call needs attention and another that indicates that there's a new call to be collected. This makes the following possibilities more achievable: (1) Call refcounting can be made simpler if skbs don't hold refs to calls. (2) skbs referring to non-data events will be able to be freed much sooner rather than being queued for AFS to pick up as rxrpc_kernel_recv_data will be able to consult the call state. (3) We can shortcut the receive phase when a call is remotely aborted because we don't have to go through all the packets to get to the one cancelling the operation. (4) It makes it easier to do encryption/decryption directly between AFS's buffers and sk_buffs. (5) Encryption/decryption can more easily be done in the AFS's thread contexts - usually that of the userspace process that issued a syscall - rather than in one of rxrpc's background threads on a workqueue. (6) AFS will be able to wait synchronously on a call inside AF_RXRPC. To make this work, the following interface function has been added: int rxrpc_kernel_recv_data( struct socket *sock, struct rxrpc_call *call, void *buffer, size_t bufsize, size_t *_offset, bool want_more, u32 *_abort_code); This is the recvmsg equivalent. It allows the caller to find out about the state of a specific call and to transfer received data into a buffer piecemeal. afs_extract_data() and rxrpc_kernel_recv_data() now do all the extraction logic between them. They don't wait synchronously yet because the socket lock needs to be dealt with. Five interface functions have been removed: rxrpc_kernel_is_data_last() rxrpc_kernel_get_abort_code() rxrpc_kernel_get_error_number() rxrpc_kernel_free_skb() rxrpc_kernel_data_consumed() As a temporary hack, sk_buffs going to an in-kernel call are queued on the rxrpc_call struct (->knlrecv_queue) rather than being handed over to the in-kernel user. To process the queue internally, a temporary function, temp_deliver_data() has been added. This will be replaced with common code between the rxrpc_recvmsg() path and the kernel_rxrpc_recv_data() path in a future patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 03:42:14 +08:00
*/
enum rxrpc_skb_mark {
RXRPC_SKB_MARK_PACKET, /* Received packet */
RXRPC_SKB_MARK_ERROR, /* Error notification */
RXRPC_SKB_MARK_SERVICE_CONN_SECURED, /* Service connection response has been verified */
RXRPC_SKB_MARK_REJECT_BUSY, /* Reject with BUSY */
RXRPC_SKB_MARK_REJECT_ABORT, /* Reject with ABORT (code in skb->priority) */
rxrpc: Don't expose skbs to in-kernel users [ver #2] Don't expose skbs to in-kernel users, such as the AFS filesystem, but instead provide a notification hook the indicates that a call needs attention and another that indicates that there's a new call to be collected. This makes the following possibilities more achievable: (1) Call refcounting can be made simpler if skbs don't hold refs to calls. (2) skbs referring to non-data events will be able to be freed much sooner rather than being queued for AFS to pick up as rxrpc_kernel_recv_data will be able to consult the call state. (3) We can shortcut the receive phase when a call is remotely aborted because we don't have to go through all the packets to get to the one cancelling the operation. (4) It makes it easier to do encryption/decryption directly between AFS's buffers and sk_buffs. (5) Encryption/decryption can more easily be done in the AFS's thread contexts - usually that of the userspace process that issued a syscall - rather than in one of rxrpc's background threads on a workqueue. (6) AFS will be able to wait synchronously on a call inside AF_RXRPC. To make this work, the following interface function has been added: int rxrpc_kernel_recv_data( struct socket *sock, struct rxrpc_call *call, void *buffer, size_t bufsize, size_t *_offset, bool want_more, u32 *_abort_code); This is the recvmsg equivalent. It allows the caller to find out about the state of a specific call and to transfer received data into a buffer piecemeal. afs_extract_data() and rxrpc_kernel_recv_data() now do all the extraction logic between them. They don't wait synchronously yet because the socket lock needs to be dealt with. Five interface functions have been removed: rxrpc_kernel_is_data_last() rxrpc_kernel_get_abort_code() rxrpc_kernel_get_error_number() rxrpc_kernel_free_skb() rxrpc_kernel_data_consumed() As a temporary hack, sk_buffs going to an in-kernel call are queued on the rxrpc_call struct (->knlrecv_queue) rather than being handed over to the in-kernel user. To process the queue internally, a temporary function, temp_deliver_data() has been added. This will be replaced with common code between the rxrpc_recvmsg() path and the kernel_rxrpc_recv_data() path in a future patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 03:42:14 +08:00
};
/*
* sk_state for RxRPC sockets
*/
enum {
RXRPC_UNBOUND = 0,
RXRPC_CLIENT_UNBOUND, /* Unbound socket used as client */
RXRPC_CLIENT_BOUND, /* client local address bound */
RXRPC_SERVER_BOUND, /* server local address bound */
RXRPC_SERVER_BOUND2, /* second server local address bound */
RXRPC_SERVER_LISTENING, /* server listening for connections */
RXRPC_SERVER_LISTEN_DISABLED, /* server listening disabled */
RXRPC_CLOSE, /* socket is being closed */
};
/*
* Per-network namespace data.
*/
struct rxrpc_net {
struct proc_dir_entry *proc_net; /* Subdir in /proc/net */
u32 epoch; /* Local epoch for detecting local-end reset */
struct list_head calls; /* List of calls active in this namespace */
rxrpc: Fix locking issue There's a locking issue with the per-netns list of calls in rxrpc. The pieces of code that add and remove a call from the list use write_lock() and the calls procfile uses read_lock() to access it. However, the timer callback function may trigger a removal by trying to queue a call for processing and finding that it's already queued - at which point it has a spare refcount that it has to do something with. Unfortunately, if it puts the call and this reduces the refcount to 0, the call will be removed from the list. Unfortunately, since the _bh variants of the locking functions aren't used, this can deadlock. ================================ WARNING: inconsistent lock state 5.18.0-rc3-build4+ #10 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/2/25 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff888107ac4038 (&rxnet->call_lock){+.?.}-{2:2}, at: rxrpc_put_call+0x103/0x14b {SOFTIRQ-ON-W} state was registered at: ... Possible unsafe locking scenario: CPU0 ---- lock(&rxnet->call_lock); <Interrupt> lock(&rxnet->call_lock); *** DEADLOCK *** 1 lock held by ksoftirqd/2/25: #0: ffff8881008ffdb0 ((&call->timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x23d Changes ======= ver #2) - Changed to using list_next_rcu() rather than rcu_dereference() directly. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-21 15:45:28 +08:00
spinlock_t call_lock; /* Lock for ->calls */
atomic_t nr_calls; /* Count of allocated calls */
atomic_t nr_conns;
struct list_head conn_proc_list; /* List of conns in this namespace for proc */
struct list_head service_conns; /* Service conns in this namespace */
rwlock_t conn_lock; /* Lock for ->conn_proc_list, ->service_conns */
struct work_struct service_conn_reaper;
struct timer_list service_conn_reap_timer;
bool live;
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
atomic_t nr_client_conns;
struct hlist_head local_endpoints;
struct mutex local_mutex; /* Lock for ->local_endpoints */
DECLARE_HASHTABLE (peer_hash, 10);
spinlock_t peer_hash_lock; /* Lock for ->peer_hash */
#define RXRPC_KEEPALIVE_TIME 20 /* NAT keepalive time in seconds */
u8 peer_keepalive_cursor;
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
time64_t peer_keepalive_base;
struct list_head peer_keepalive[32];
struct list_head peer_keepalive_new;
struct timer_list peer_keepalive_timer;
struct work_struct peer_keepalive_work;
atomic_t stat_tx_data;
atomic_t stat_tx_data_retrans;
atomic_t stat_tx_data_send;
atomic_t stat_tx_data_send_frag;
atomic_t stat_tx_data_send_fail;
atomic_t stat_tx_data_underflow;
atomic_t stat_tx_data_cwnd_reset;
atomic_t stat_rx_data;
atomic_t stat_rx_data_reqack;
atomic_t stat_rx_data_jumbo;
atomic_t stat_tx_ack_fill;
atomic_t stat_tx_ack_send;
atomic_t stat_tx_ack_skip;
atomic_t stat_tx_acks[256];
atomic_t stat_rx_acks[256];
atomic_t stat_why_req_ack[8];
atomic_t stat_io_loop;
};
rxrpc: Preallocate peers, conns and calls for incoming service requests Make it possible for the data_ready handler called from the UDP transport socket to completely instantiate an rxrpc_call structure and make it immediately live by preallocating all the memory it might need. The idea is to cut out the background thread usage as much as possible. [Note that the preallocated structs are not actually used in this patch - that will be done in a future patch.] If insufficient resources are available in the preallocation buffers, it will be possible to discard the DATA packet in the data_ready handler or schedule a BUSY packet without the need to schedule an attempt at allocation in a background thread. To this end: (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a maximum number each of the listen backlog size. The backlog size is limited to a maxmimum of 32. Only this many of each can be in the preallocation buffer. (2) For userspace sockets, the preallocation is charged initially by listen() and will be recharged by accepting or rejecting pending new incoming calls. (3) For kernel services {,re,dis}charging of the preallocation buffers is handled manually. Two notifier callbacks have to be provided before kernel_listen() is invoked: (a) An indication that a new call has been instantiated. This can be used to trigger background recharging. (b) An indication that a call is being discarded. This is used when the socket is being released. A function, rxrpc_kernel_charge_accept() is called by the kernel service to preallocate a single call. It should be passed the user ID to be used for that call and a callback to associate the rxrpc call with the kernel service's side of the ID. (4) Discard the preallocation when the socket is closed. (5) Temporarily bump the refcount on the call allocated in rxrpc_incoming_call() so that rxrpc_release_call() can ditch the preallocation ref on service calls unconditionally. This will no longer be necessary once the preallocation is used. Note that this does not yet control the number of active service calls on a client - that will come in a later patch. A future development would be to provide a setsockopt() call that allows a userspace server to manually charge the preallocation buffer. This would allow user call IDs to be provided in advance and the awkward manual accept stage to be bypassed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
/*
* Service backlog preallocation.
*
* This contains circular buffers of preallocated peers, connections and calls
* for incoming service calls and their head and tail pointers. This allows
* calls to be set up in the data_ready handler, thereby avoiding the need to
* shuffle packets around so much.
*/
struct rxrpc_backlog {
unsigned short peer_backlog_head;
unsigned short peer_backlog_tail;
unsigned short conn_backlog_head;
unsigned short conn_backlog_tail;
unsigned short call_backlog_head;
unsigned short call_backlog_tail;
#define RXRPC_BACKLOG_MAX 32
struct rxrpc_peer *peer_backlog[RXRPC_BACKLOG_MAX];
struct rxrpc_connection *conn_backlog[RXRPC_BACKLOG_MAX];
struct rxrpc_call *call_backlog[RXRPC_BACKLOG_MAX];
};
/*
* RxRPC socket definition
*/
struct rxrpc_sock {
/* WARNING: sk has to be the first member */
struct sock sk;
rxrpc: Don't expose skbs to in-kernel users [ver #2] Don't expose skbs to in-kernel users, such as the AFS filesystem, but instead provide a notification hook the indicates that a call needs attention and another that indicates that there's a new call to be collected. This makes the following possibilities more achievable: (1) Call refcounting can be made simpler if skbs don't hold refs to calls. (2) skbs referring to non-data events will be able to be freed much sooner rather than being queued for AFS to pick up as rxrpc_kernel_recv_data will be able to consult the call state. (3) We can shortcut the receive phase when a call is remotely aborted because we don't have to go through all the packets to get to the one cancelling the operation. (4) It makes it easier to do encryption/decryption directly between AFS's buffers and sk_buffs. (5) Encryption/decryption can more easily be done in the AFS's thread contexts - usually that of the userspace process that issued a syscall - rather than in one of rxrpc's background threads on a workqueue. (6) AFS will be able to wait synchronously on a call inside AF_RXRPC. To make this work, the following interface function has been added: int rxrpc_kernel_recv_data( struct socket *sock, struct rxrpc_call *call, void *buffer, size_t bufsize, size_t *_offset, bool want_more, u32 *_abort_code); This is the recvmsg equivalent. It allows the caller to find out about the state of a specific call and to transfer received data into a buffer piecemeal. afs_extract_data() and rxrpc_kernel_recv_data() now do all the extraction logic between them. They don't wait synchronously yet because the socket lock needs to be dealt with. Five interface functions have been removed: rxrpc_kernel_is_data_last() rxrpc_kernel_get_abort_code() rxrpc_kernel_get_error_number() rxrpc_kernel_free_skb() rxrpc_kernel_data_consumed() As a temporary hack, sk_buffs going to an in-kernel call are queued on the rxrpc_call struct (->knlrecv_queue) rather than being handed over to the in-kernel user. To process the queue internally, a temporary function, temp_deliver_data() has been added. This will be replaced with common code between the rxrpc_recvmsg() path and the kernel_rxrpc_recv_data() path in a future patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 03:42:14 +08:00
rxrpc_notify_new_call_t notify_new_call; /* Func to notify of new call */
rxrpc: Preallocate peers, conns and calls for incoming service requests Make it possible for the data_ready handler called from the UDP transport socket to completely instantiate an rxrpc_call structure and make it immediately live by preallocating all the memory it might need. The idea is to cut out the background thread usage as much as possible. [Note that the preallocated structs are not actually used in this patch - that will be done in a future patch.] If insufficient resources are available in the preallocation buffers, it will be possible to discard the DATA packet in the data_ready handler or schedule a BUSY packet without the need to schedule an attempt at allocation in a background thread. To this end: (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a maximum number each of the listen backlog size. The backlog size is limited to a maxmimum of 32. Only this many of each can be in the preallocation buffer. (2) For userspace sockets, the preallocation is charged initially by listen() and will be recharged by accepting or rejecting pending new incoming calls. (3) For kernel services {,re,dis}charging of the preallocation buffers is handled manually. Two notifier callbacks have to be provided before kernel_listen() is invoked: (a) An indication that a new call has been instantiated. This can be used to trigger background recharging. (b) An indication that a call is being discarded. This is used when the socket is being released. A function, rxrpc_kernel_charge_accept() is called by the kernel service to preallocate a single call. It should be passed the user ID to be used for that call and a callback to associate the rxrpc call with the kernel service's side of the ID. (4) Discard the preallocation when the socket is closed. (5) Temporarily bump the refcount on the call allocated in rxrpc_incoming_call() so that rxrpc_release_call() can ditch the preallocation ref on service calls unconditionally. This will no longer be necessary once the preallocation is used. Note that this does not yet control the number of active service calls on a client - that will come in a later patch. A future development would be to provide a setsockopt() call that allows a userspace server to manually charge the preallocation buffer. This would allow user call IDs to be provided in advance and the awkward manual accept stage to be bypassed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
rxrpc_discard_new_call_t discard_new_call; /* Func to discard a new call */
struct rxrpc_local *local; /* local endpoint */
rxrpc: Preallocate peers, conns and calls for incoming service requests Make it possible for the data_ready handler called from the UDP transport socket to completely instantiate an rxrpc_call structure and make it immediately live by preallocating all the memory it might need. The idea is to cut out the background thread usage as much as possible. [Note that the preallocated structs are not actually used in this patch - that will be done in a future patch.] If insufficient resources are available in the preallocation buffers, it will be possible to discard the DATA packet in the data_ready handler or schedule a BUSY packet without the need to schedule an attempt at allocation in a background thread. To this end: (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a maximum number each of the listen backlog size. The backlog size is limited to a maxmimum of 32. Only this many of each can be in the preallocation buffer. (2) For userspace sockets, the preallocation is charged initially by listen() and will be recharged by accepting or rejecting pending new incoming calls. (3) For kernel services {,re,dis}charging of the preallocation buffers is handled manually. Two notifier callbacks have to be provided before kernel_listen() is invoked: (a) An indication that a new call has been instantiated. This can be used to trigger background recharging. (b) An indication that a call is being discarded. This is used when the socket is being released. A function, rxrpc_kernel_charge_accept() is called by the kernel service to preallocate a single call. It should be passed the user ID to be used for that call and a callback to associate the rxrpc call with the kernel service's side of the ID. (4) Discard the preallocation when the socket is closed. (5) Temporarily bump the refcount on the call allocated in rxrpc_incoming_call() so that rxrpc_release_call() can ditch the preallocation ref on service calls unconditionally. This will no longer be necessary once the preallocation is used. Note that this does not yet control the number of active service calls on a client - that will come in a later patch. A future development would be to provide a setsockopt() call that allows a userspace server to manually charge the preallocation buffer. This would allow user call IDs to be provided in advance and the awkward manual accept stage to be bypassed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
struct rxrpc_backlog *backlog; /* Preallocation for services */
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
spinlock_t incoming_lock; /* Incoming call vs service shutdown lock */
struct list_head sock_calls; /* List of calls owned by this socket */
struct list_head to_be_accepted; /* calls awaiting acceptance */
struct list_head recvmsg_q; /* Calls awaiting recvmsg's attention */
spinlock_t recvmsg_lock; /* Lock for recvmsg_q */
struct key *key; /* security for this socket */
struct key *securities; /* list of server security descriptors */
rxrpc: Preallocate peers, conns and calls for incoming service requests Make it possible for the data_ready handler called from the UDP transport socket to completely instantiate an rxrpc_call structure and make it immediately live by preallocating all the memory it might need. The idea is to cut out the background thread usage as much as possible. [Note that the preallocated structs are not actually used in this patch - that will be done in a future patch.] If insufficient resources are available in the preallocation buffers, it will be possible to discard the DATA packet in the data_ready handler or schedule a BUSY packet without the need to schedule an attempt at allocation in a background thread. To this end: (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a maximum number each of the listen backlog size. The backlog size is limited to a maxmimum of 32. Only this many of each can be in the preallocation buffer. (2) For userspace sockets, the preallocation is charged initially by listen() and will be recharged by accepting or rejecting pending new incoming calls. (3) For kernel services {,re,dis}charging of the preallocation buffers is handled manually. Two notifier callbacks have to be provided before kernel_listen() is invoked: (a) An indication that a new call has been instantiated. This can be used to trigger background recharging. (b) An indication that a call is being discarded. This is used when the socket is being released. A function, rxrpc_kernel_charge_accept() is called by the kernel service to preallocate a single call. It should be passed the user ID to be used for that call and a callback to associate the rxrpc call with the kernel service's side of the ID. (4) Discard the preallocation when the socket is closed. (5) Temporarily bump the refcount on the call allocated in rxrpc_incoming_call() so that rxrpc_release_call() can ditch the preallocation ref on service calls unconditionally. This will no longer be necessary once the preallocation is used. Note that this does not yet control the number of active service calls on a client - that will come in a later patch. A future development would be to provide a setsockopt() call that allows a userspace server to manually charge the preallocation buffer. This would allow user call IDs to be provided in advance and the awkward manual accept stage to be bypassed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
struct rb_root calls; /* User ID -> call mapping */
unsigned long flags;
#define RXRPC_SOCK_CONNECTED 0 /* connect_srx is set */
rwlock_t call_lock; /* lock for calls */
u32 min_sec_level; /* minimum security level */
#define RXRPC_SECURITY_MAX RXRPC_SECURITY_ENCRYPT
bool exclusive; /* Exclusive connection for a client socket */
u16 second_service; /* Additional service bound to the endpoint */
rxrpc: Implement service upgrade Implement AuriStor's service upgrade facility. There are three problems that this is meant to deal with: (1) Various of the standard AFS RPC calls have IPv4 addresses in their requests and/or replies - but there's no room for including IPv6 addresses. (2) Definition of IPv6-specific RPC operations in the standard operation sets has not yet been achieved. (3) One could envision the creation a new service on the same port that as the original service. The new service could implement improved operations - and the client could try this first, falling back to the original service if it's not there. Unfortunately, certain servers ignore packets addressed to a service they don't implement and don't respond in any way - not even with an ABORT. This means that the client must then wait for the call timeout to occur. What service upgrade does is to see if the connection is marked as being 'upgradeable' and if so, change the service ID in the server and thus the request and reply formats. Note that the upgrade isn't mandatory - a server that supports only the original call set will ignore the upgrade request. In the protocol, the procedure is then as follows: (1) To request an upgrade, the first DATA packet in a new connection must have the userStatus set to 1 (this is normally 0). The userStatus value is normally ignored by the server. (2) If the server doesn't support upgrading, the reply packets will contain the same service ID as for the first request packet. (3) If the server does support upgrading, all future reply packets on that connection will contain the new service ID and the new service ID will be applied to *all* further calls on that connection as well. (4) The RPC op used to probe the upgrade must take the same request data as the shadow call in the upgrade set (but may return a different reply). GetCapability RPC ops were added to all standard sets for just this purpose. Ops where the request formats differ cannot be used for probing. (5) The client must wait for completion of the probe before sending any further RPC ops to the same destination. It should then use the service ID that recvmsg() reported back in all future calls. (6) The shadow service must have call definitions for all the operation IDs defined by the original service. To support service upgrading, a server should: (1) Call bind() twice on its AF_RXRPC socket before calling listen(). Each bind() should supply a different service ID, but the transport addresses must be the same. This allows the server to receive requests with either service ID. (2) Enable automatic upgrading by calling setsockopt(), specifying RXRPC_UPGRADEABLE_SERVICE and passing in a two-member array of unsigned shorts as the argument: unsigned short optval[2]; This specifies a pair of service IDs. They must be different and must match the service IDs bound to the socket. Member 0 is the service ID to upgrade from and member 1 is the service ID to upgrade to. Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-05 21:30:49 +08:00
struct {
/* Service upgrade information */
u16 from; /* Service ID to upgrade (if not 0) */
u16 to; /* service ID to upgrade to */
} service_upgrade;
sa_family_t family; /* Protocol family created with */
rxrpc: Implement service upgrade Implement AuriStor's service upgrade facility. There are three problems that this is meant to deal with: (1) Various of the standard AFS RPC calls have IPv4 addresses in their requests and/or replies - but there's no room for including IPv6 addresses. (2) Definition of IPv6-specific RPC operations in the standard operation sets has not yet been achieved. (3) One could envision the creation a new service on the same port that as the original service. The new service could implement improved operations - and the client could try this first, falling back to the original service if it's not there. Unfortunately, certain servers ignore packets addressed to a service they don't implement and don't respond in any way - not even with an ABORT. This means that the client must then wait for the call timeout to occur. What service upgrade does is to see if the connection is marked as being 'upgradeable' and if so, change the service ID in the server and thus the request and reply formats. Note that the upgrade isn't mandatory - a server that supports only the original call set will ignore the upgrade request. In the protocol, the procedure is then as follows: (1) To request an upgrade, the first DATA packet in a new connection must have the userStatus set to 1 (this is normally 0). The userStatus value is normally ignored by the server. (2) If the server doesn't support upgrading, the reply packets will contain the same service ID as for the first request packet. (3) If the server does support upgrading, all future reply packets on that connection will contain the new service ID and the new service ID will be applied to *all* further calls on that connection as well. (4) The RPC op used to probe the upgrade must take the same request data as the shadow call in the upgrade set (but may return a different reply). GetCapability RPC ops were added to all standard sets for just this purpose. Ops where the request formats differ cannot be used for probing. (5) The client must wait for completion of the probe before sending any further RPC ops to the same destination. It should then use the service ID that recvmsg() reported back in all future calls. (6) The shadow service must have call definitions for all the operation IDs defined by the original service. To support service upgrading, a server should: (1) Call bind() twice on its AF_RXRPC socket before calling listen(). Each bind() should supply a different service ID, but the transport addresses must be the same. This allows the server to receive requests with either service ID. (2) Enable automatic upgrading by calling setsockopt(), specifying RXRPC_UPGRADEABLE_SERVICE and passing in a two-member array of unsigned shorts as the argument: unsigned short optval[2]; This specifies a pair of service IDs. They must be different and must match the service IDs bound to the socket. Member 0 is the service ID to upgrade from and member 1 is the service ID to upgrade to. Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-05 21:30:49 +08:00
struct sockaddr_rxrpc srx; /* Primary Service/local addresses */
struct sockaddr_rxrpc connect_srx; /* Default client address from connect() */
};
#define rxrpc_sk(__sk) container_of((__sk), struct rxrpc_sock, sk)
/*
* CPU-byteorder normalised Rx packet header.
*/
struct rxrpc_host_header {
u32 epoch; /* client boot timestamp */
u32 cid; /* connection and channel ID */
u32 callNumber; /* call ID (0 for connection-level packets) */
u32 seq; /* sequence number of pkt in call stream */
u32 serial; /* serial number of pkt sent to network */
u8 type; /* packet type */
u8 flags; /* packet flags */
u8 userStatus; /* app-layer defined status */
u8 securityIndex; /* security protocol ID */
union {
u16 _rsvd; /* reserved */
u16 cksum; /* kerberos security checksum */
};
u16 serviceId; /* service ID */
} __packed;
/*
* RxRPC socket buffer private variables
* - max 48 bytes (struct sk_buff::cb)
*/
struct rxrpc_skb_priv {
struct rxrpc_connection *conn; /* Connection referred to (poke packet) */
u16 offset; /* Offset of data */
u16 len; /* Length of data */
u8 flags;
#define RXRPC_RX_VERIFIED 0x01
struct rxrpc_host_header hdr; /* RxRPC packet header from this packet */
};
#define rxrpc_skb(__skb) ((struct rxrpc_skb_priv *) &(__skb)->cb)
/*
* RxRPC security module interface
*/
struct rxrpc_security {
const char *name; /* name of this service */
u8 security_index; /* security type provided */
u32 no_key_abort; /* Abort code indicating no key */
/* Initialise a security service */
int (*init)(void);
/* Clean up a security service */
void (*exit)(void);
/* Parse the information from a server key */
int (*preparse_server_key)(struct key_preparsed_payload *);
/* Clean up the preparse buffer after parsing a server key */
void (*free_preparse_server_key)(struct key_preparsed_payload *);
/* Destroy the payload of a server key */
void (*destroy_server_key)(struct key *);
/* Describe a server key */
void (*describe_server_key)(const struct key *, struct seq_file *);
/* initialise a connection's security */
int (*init_connection_security)(struct rxrpc_connection *,
struct rxrpc_key_token *);
/* Work out how much data we can store in a packet, given an estimate
* of the amount of data remaining.
*/
int (*how_much_data)(struct rxrpc_call *, size_t,
size_t *, size_t *, size_t *);
/* impose security on a packet */
rxrpc: Don't use a ring buffer for call Tx queue Change the way the Tx queueing works to make the following ends easier to achieve: (1) The filling of packets, the encryption of packets and the transmission of packets can be handled in parallel by separate threads, rather than rxrpc_sendmsg() allocating, filling, encrypting and transmitting each packet before moving onto the next one. (2) Get rid of the fixed-size ring which sets a hard limit on the number of packets that can be retained in the ring. This allows the number of packets to increase without having to allocate a very large ring or having variable-sized rings. [Note: the downside of this is that it's then less efficient to locate a packet for retransmission as we then have to step through a list and examine each buffer in the list.] (3) Allow the filler/encrypter to run ahead of the transmission window. (4) Make it easier to do zero copy UDP from the packet buffers. (5) Make it easier to do zero copy from userspace to the packet buffers - and thence to UDP (only if for unauthenticated connections). To that end, the following changes are made: (1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets to be transmitted in. This allows them to be placed on multiple queues simultaneously. An sk_buff isn't really necessary as it's never passed on to lower-level networking code. (2) Keep the transmissable packets in a linked list on the call struct rather than in a ring. As a consequence, the annotation buffer isn't used either; rather a flag is set on the packet to indicate ackedness. (3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate that all packets up to and including the last got hard acked. (4) Wire headers are now stored in the txbuf rather than being concocted on the stack and they're stored immediately before the data, thereby allowing zerocopy of a single span. (5) Don't bother with instant-resend on transmission failure; rather, leave it for a timer or an ACK packet to trigger. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-04-01 06:55:08 +08:00
int (*secure_packet)(struct rxrpc_call *, struct rxrpc_txbuf *);
/* verify the security on a received packet */
int (*verify_packet)(struct rxrpc_call *, struct sk_buff *);
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
/* Free crypto request on a call */
void (*free_call_crypto)(struct rxrpc_call *);
/* issue a challenge */
int (*issue_challenge)(struct rxrpc_connection *);
/* respond to a challenge */
int (*respond_to_challenge)(struct rxrpc_connection *,
struct sk_buff *);
/* verify a response */
int (*verify_response)(struct rxrpc_connection *,
struct sk_buff *);
/* clear connection security */
void (*clear)(struct rxrpc_connection *);
};
/*
rxrpc: Rework local endpoint management Rework the local RxRPC endpoint management. Local endpoint objects are maintained in a flat list as before. This should be okay as there shouldn't be more than one per open AF_RXRPC socket (there can be fewer as local endpoints can be shared if their local service ID is 0 and they share the same local transport parameters). Changes: (1) Local endpoints may now only be shared if they have local service ID 0 (ie. they're not being used for listening). This prevents a scenario where process A is listening of the Cache Manager port and process B contacts a fileserver - which may then attempt to send CM requests back to B. But if A and B are sharing a local endpoint, A will get the CM requests meant for B. (2) We use a mutex to handle lookups and don't provide RCU-only lookups since we only expect to access the list when opening a socket or destroying an endpoint. The local endpoint object is pointed to by the transport socket's sk_user_data for the life of the transport socket - allowing us to refer to it directly from the sk_data_ready and sk_error_report callbacks. (3) atomic_inc_not_zero() now exists and can be used to only share a local endpoint if the last reference hasn't yet gone. (4) We can remove rxrpc_local_lock - a spinlock that had to be taken with BH processing disabled given that we assume sk_user_data won't change under us. (5) The transport socket is shut down before we clear the sk_user_data pointer so that we can be sure that the transport socket's callbacks won't be invoked once the RCU destruction is scheduled. (6) Local endpoints have a work item that handles both destruction and event processing. The means that destruction doesn't then need to wait for event processing. The event queues can then be cleared after the transport socket is shut down. (7) Local endpoints are no longer available for resurrection beyond the life of the sockets that had them open. As soon as their last ref goes, they are scheduled for destruction and may not have their usage count moved from 0. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:35 +08:00
* RxRPC local transport endpoint description
* - owned by a single AF_RXRPC socket
* - pointed to by transport socket struct sk_user_data
*/
struct rxrpc_local {
rxrpc: Rework local endpoint management Rework the local RxRPC endpoint management. Local endpoint objects are maintained in a flat list as before. This should be okay as there shouldn't be more than one per open AF_RXRPC socket (there can be fewer as local endpoints can be shared if their local service ID is 0 and they share the same local transport parameters). Changes: (1) Local endpoints may now only be shared if they have local service ID 0 (ie. they're not being used for listening). This prevents a scenario where process A is listening of the Cache Manager port and process B contacts a fileserver - which may then attempt to send CM requests back to B. But if A and B are sharing a local endpoint, A will get the CM requests meant for B. (2) We use a mutex to handle lookups and don't provide RCU-only lookups since we only expect to access the list when opening a socket or destroying an endpoint. The local endpoint object is pointed to by the transport socket's sk_user_data for the life of the transport socket - allowing us to refer to it directly from the sk_data_ready and sk_error_report callbacks. (3) atomic_inc_not_zero() now exists and can be used to only share a local endpoint if the last reference hasn't yet gone. (4) We can remove rxrpc_local_lock - a spinlock that had to be taken with BH processing disabled given that we assume sk_user_data won't change under us. (5) The transport socket is shut down before we clear the sk_user_data pointer so that we can be sure that the transport socket's callbacks won't be invoked once the RCU destruction is scheduled. (6) Local endpoints have a work item that handles both destruction and event processing. The means that destruction doesn't then need to wait for event processing. The event queues can then be cleared after the transport socket is shut down. (7) Local endpoints are no longer available for resurrection beyond the life of the sockets that had them open. As soon as their last ref goes, they are scheduled for destruction and may not have their usage count moved from 0. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:35 +08:00
struct rcu_head rcu;
atomic_t active_users; /* Number of users of the local endpoint */
refcount_t ref; /* Number of references to the structure */
struct net *net; /* The network namespace */
struct rxrpc_net *rxnet; /* Our bits in the network namespace */
struct hlist_node link;
struct socket *socket; /* my UDP socket */
struct task_struct *io_thread;
rxrpc: Fix I/O thread startup getting skipped When starting a kthread, the __kthread_create_on_node() function, as called from kthread_run(), waits for a completion to indicate that the task_struct (or failure state) of the new kernel thread is available before continuing. This does not wait, however, for the thread function to be invoked and, indeed, will skip it if kthread_stop() gets called before it gets there. If this happens, though, kthread_run() will have returned successfully, indicating that the thread was started and returning the task_struct pointer. The actual error indication is returned by kthread_stop(). Note that this is ambiguous, as the caller cannot tell whether the -EINTR error code came from kthread() or from the thread function. This was encountered in the new rxrpc I/O thread, where if the system is being pounded hard by, say, syzbot, the check of KTHREAD_SHOULD_STOP can be delayed long enough for kthread_stop() to get called when rxrpc releases a socket - and this causes an oops because the I/O thread function doesn't get started and thus doesn't remove the rxrpc_local struct from the local_endpoints list. Fix this by using a completion to wait for the thread to actually enter rxrpc_io_thread(). This makes sure the thread can't be prematurely stopped and makes sure the relied-upon cleanup is done. Fixes: a275da62e8c1 ("rxrpc: Create a per-local endpoint receive queue and I/O thread") Reported-by: syzbot+3538a6a72efa8b059c38@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Hillf Danton <hdanton@sina.com> Link: https://lore.kernel.org/r/000000000000229f1505ef2b6159@google.com/ Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-16 00:20:13 +08:00
struct completion io_thread_ready; /* Indication that the I/O thread started */
rxrpc: Fix incoming call setup race An incoming call can race with rxrpc socket destruction, leading to a leaked call. This may result in an oops when the call timer eventually expires: BUG: kernel NULL pointer dereference, address: 0000000000000874 RIP: 0010:_raw_spin_lock_irqsave+0x2a/0x50 Call Trace: <IRQ> try_to_wake_up+0x59/0x550 ? __local_bh_enable_ip+0x37/0x80 ? rxrpc_poke_call+0x52/0x110 [rxrpc] ? rxrpc_poke_call+0x110/0x110 [rxrpc] ? rxrpc_poke_call+0x110/0x110 [rxrpc] call_timer_fn+0x24/0x120 with a warning in the kernel log looking something like: rxrpc: Call 00000000ba5e571a still in use (1,SvAwtACK,1061d,0)! incurred during rmmod of rxrpc. The 1061d is the call flags: RECVMSG_READ_ALL, RX_HEARD, BEGAN_RX_TIMER, RX_LAST, EXPOSED, IS_SERVICE, RELEASED but no DISCONNECTED flag (0x800), so it's an incoming (service) call and it's still connected. The race appears to be that: (1) rxrpc_new_incoming_call() consults the service struct, checks sk_state and allocates a call - then pauses, possibly for an interrupt. (2) rxrpc_release_sock() sets RXRPC_CLOSE, nulls the service pointer, discards the prealloc and releases all calls attached to the socket. (3) rxrpc_new_incoming_call() resumes, launching the new call, including its timer and attaching it to the socket. Fix this by read-locking local->services_lock to access the AF_RXRPC socket providing the service rather than RCU in rxrpc_new_incoming_call(). There's no real need to use RCU here as local->services_lock is only write-locked by the socket side in two places: when binding and when shutting down. Fixes: 5e6ef4f1017c ("rxrpc: Make the I/O thread take over the call and local processor work") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org
2023-01-06 21:03:18 +08:00
struct rxrpc_sock *service; /* Service(s) listening on this endpoint */
#ifdef CONFIG_AF_RXRPC_INJECT_RX_DELAY
struct sk_buff_head rx_delay_queue; /* Delay injection queue */
#endif
struct sk_buff_head rx_queue; /* Received packets */
struct list_head conn_attend_q; /* Conns requiring immediate attention */
struct list_head call_attend_q; /* Calls requiring immediate attention */
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
struct rb_root client_bundles; /* Client connection bundles by socket params */
spinlock_t client_bundles_lock; /* Lock for client_bundles */
bool kill_all_client_conns;
struct list_head idle_client_conns;
struct timer_list client_conn_reap_timer;
unsigned long client_conn_flags;
#define RXRPC_CLIENT_CONN_REAP_TIMER 0 /* The client conn reap timer expired */
spinlock_t lock; /* access lock */
rwlock_t services_lock; /* lock for services list */
int debug_id; /* debug ID for printks */
rxrpc: Rework local endpoint management Rework the local RxRPC endpoint management. Local endpoint objects are maintained in a flat list as before. This should be okay as there shouldn't be more than one per open AF_RXRPC socket (there can be fewer as local endpoints can be shared if their local service ID is 0 and they share the same local transport parameters). Changes: (1) Local endpoints may now only be shared if they have local service ID 0 (ie. they're not being used for listening). This prevents a scenario where process A is listening of the Cache Manager port and process B contacts a fileserver - which may then attempt to send CM requests back to B. But if A and B are sharing a local endpoint, A will get the CM requests meant for B. (2) We use a mutex to handle lookups and don't provide RCU-only lookups since we only expect to access the list when opening a socket or destroying an endpoint. The local endpoint object is pointed to by the transport socket's sk_user_data for the life of the transport socket - allowing us to refer to it directly from the sk_data_ready and sk_error_report callbacks. (3) atomic_inc_not_zero() now exists and can be used to only share a local endpoint if the last reference hasn't yet gone. (4) We can remove rxrpc_local_lock - a spinlock that had to be taken with BH processing disabled given that we assume sk_user_data won't change under us. (5) The transport socket is shut down before we clear the sk_user_data pointer so that we can be sure that the transport socket's callbacks won't be invoked once the RCU destruction is scheduled. (6) Local endpoints have a work item that handles both destruction and event processing. The means that destruction doesn't then need to wait for event processing. The event queues can then be cleared after the transport socket is shut down. (7) Local endpoints are no longer available for resurrection beyond the life of the sockets that had them open. As soon as their last ref goes, they are scheduled for destruction and may not have their usage count moved from 0. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:35 +08:00
bool dead;
bool service_closed; /* Service socket closed */
struct idr conn_ids; /* List of connection IDs */
struct list_head new_client_calls; /* Newly created client calls need connection */
spinlock_t client_call_lock; /* Lock for ->new_client_calls */
struct sockaddr_rxrpc srx; /* local address */
};
/*
* RxRPC remote transport endpoint definition
* - matched by local endpoint, remote port, address and protocol type
*/
struct rxrpc_peer {
struct rcu_head rcu; /* This must be first */
refcount_t ref;
unsigned long hash_key;
struct hlist_node hash_link;
struct rxrpc_local *local;
struct hlist_head error_targets; /* targets for net error distribution */
struct rb_root service_conns; /* Service connections */
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
struct list_head keepalive_link; /* Link in net->peer_keepalive[] */
time64_t last_tx_at; /* Last time packet sent here */
seqlock_t service_conn_lock;
spinlock_t lock; /* access lock */
unsigned int if_mtu; /* interface MTU for this peer */
unsigned int mtu; /* network MTU for this peer */
unsigned int maxdata; /* data size (MTU - hdrsize) */
unsigned short hdrsize; /* header size (IP + UDP + RxRPC) */
int debug_id; /* debug ID for printks */
struct sockaddr_rxrpc srx; /* remote address */
/* calculated RTT cache */
#define RXRPC_RTT_CACHE_SIZE 32
rxrpc: Fix the packet reception routine The rxrpc_input_packet() function and its call tree was built around the assumption that data_ready() handler called from UDP to inform a kernel service that there is data to be had was non-reentrant. This means that certain locking could be dispensed with. This, however, turns out not to be the case with a multi-queue network card that can deliver packets to multiple cpus simultaneously. Each of those cpus can be in the rxrpc_input_packet() function at the same time. Fix by adding or changing some structure members: (1) Add peer->rtt_input_lock to serialise access to the RTT buffer. (2) Make conn->service_id into a 32-bit variable so that it can be cmpxchg'd on all arches. (3) Add call->input_lock to serialise access to the Rx/Tx state. Note that although the Rx and Tx states are (almost) entirely separate, there's no point completing the separation and having separate locks since it's a bi-phasal RPC protocol rather than a bi-direction streaming protocol. Data transmission and data reception do not take place simultaneously on any particular call. and making the following functional changes: (1) In rxrpc_input_data(), hold call->input_lock around the core to prevent simultaneous producing of packets into the Rx ring and updating of tracking state for a particular call. (2) In rxrpc_input_ping_response(), only read call->ping_serial once, and check it before checking RXRPC_CALL_PINGING as that's a cheaper test. The bit test and bit clear can then be combined. No further locking is needed here. (3) In rxrpc_input_ack(), take call->input_lock after we've parsed much of the ACK packet. The superseded ACK check is then done both before and after the lock is taken. The handing of ackinfo data is split, parsing before the lock is taken and processing with it held. This is keyed on rxMTU being non-zero. Congestion management is also done within the locked section. (4) In rxrpc_input_ackall(), take call->input_lock around the Tx window rotation. The ACKALL packet carries no information and is only really useful after all packets have been transmitted since it's imprecise. (5) In rxrpc_input_implicit_end_call(), we use rx->incoming_lock to prevent calls being simultaneously implicitly ended on two cpus and also to prevent any races with incoming call setup. (6) In rxrpc_input_packet(), use cmpxchg() to effect the service upgrade on a connection. It is only permitted to happen once for a connection. (7) In rxrpc_new_incoming_call(), we have to recheck the routing inside rx->incoming_lock to see if someone else set up the call, connection or peer whilst we were getting there. We can't trust the values from the earlier routing check unless we pin refs on them - which we want to avoid. Further, we need to allow for an incoming call to have its state changed on another CPU between us making it live and us adjusting it because the conn is now in the RXRPC_CONN_SERVICE state. (8) In rxrpc_peer_add_rtt(), take peer->rtt_input_lock around the access to the RTT buffer. Don't need to lock around setting peer->rtt. For reference, the inventory of state-accessing or state-altering functions used by the packet input procedure is: > rxrpc_input_packet() * PACKET CHECKING * ROUTING > rxrpc_post_packet_to_local() > rxrpc_find_connection_rcu() - uses RCU > rxrpc_lookup_peer_rcu() - uses RCU > rxrpc_find_service_conn_rcu() - uses RCU > idr_find() - uses RCU * CONNECTION-LEVEL PROCESSING - Service upgrade - Can only happen once per conn ! Changed to use cmpxchg > rxrpc_post_packet_to_conn() - Setting conn->hi_serial - Probably safe not using locks - Maybe use cmpxchg * CALL-LEVEL PROCESSING > Old-call checking > rxrpc_input_implicit_end_call() > rxrpc_call_completed() > rxrpc_queue_call() ! Need to take rx->incoming_lock > __rxrpc_disconnect_call() > rxrpc_notify_socket() > rxrpc_new_incoming_call() - Uses rx->incoming_lock for the entire process - Might be able to drop this earlier in favour of the call lock > rxrpc_incoming_call() ! Conflicts with rxrpc_input_implicit_end_call() > rxrpc_send_ping() - Don't need locks to check rtt state > rxrpc_propose_ACK * PACKET DISTRIBUTION > rxrpc_input_call_packet() > rxrpc_input_data() * QUEUE DATA PACKET ON CALL > rxrpc_reduce_call_timer() - Uses timer_reduce() ! Needs call->input_lock() > rxrpc_receiving_reply() ! Needs locking around ack state > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_proto_abort() > rxrpc_input_dup_data() - Fills the Rx buffer - rxrpc_propose_ACK() - rxrpc_notify_socket() > rxrpc_input_ack() * APPLY ACK PACKET TO CALL AND DISCARD PACKET > rxrpc_input_ping_response() - Probably doesn't need any extra locking ! Need READ_ONCE() on call->ping_serial > rxrpc_input_check_for_lost_ack() - Takes call->lock to consult Tx buffer > rxrpc_peer_add_rtt() ! Needs to take a lock (peer->rtt_input_lock) ! Could perhaps manage with cmpxchg() and xadd() instead > rxrpc_input_requested_ack - Consults Tx buffer ! Probably needs a lock > rxrpc_peer_add_rtt() > rxrpc_propose_ack() > rxrpc_input_ackinfo() - Changes call->tx_winsize ! Use cmpxchg to handle change ! Should perhaps track serial number - Uses peer->lock to record MTU specification changes > rxrpc_proto_abort() ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_input_soft_acks() - Consults the Tx buffer > rxrpc_congestion_management() - Modifies the Tx annotations ! Needs call->input_lock() > rxrpc_queue_call() > rxrpc_input_abort() * APPLY ABORT PACKET TO CALL AND DISCARD PACKET > rxrpc_set_call_completion() > rxrpc_notify_socket() > rxrpc_input_ackall() * APPLY ACKALL PACKET TO CALL AND DISCARD PACKET ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_reject_packet() There are some functions used by the above that queue the packet, after which the procedure is terminated: - rxrpc_post_packet_to_local() - local->event_queue is an sk_buff_head - local->processor is a work_struct - rxrpc_post_packet_to_conn() - conn->rx_queue is an sk_buff_head - conn->processor is a work_struct - rxrpc_reject_packet() - local->reject_queue is an sk_buff_head - local->processor is a work_struct And some that offload processing to process context: - rxrpc_notify_socket() - Uses RCU lock - Uses call->notify_lock to call call->notify_rx - Uses call->recvmsg_lock to queue recvmsg side - rxrpc_queue_call() - call->processor is a work_struct - rxrpc_propose_ACK() - Uses call->lock to wrap __rxrpc_propose_ACK() And a bunch that complete a call, all of which use call->state_lock to protect the call state: - rxrpc_call_completed() - rxrpc_set_call_completion() - rxrpc_abort_call() - rxrpc_proto_abort() - Also uses rxrpc_queue_call() Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-08 22:46:25 +08:00
spinlock_t rtt_input_lock; /* RTT lock for input routine */
ktime_t rtt_last_req; /* Time of last RTT request */
rxrpc: Fix the excessive initial retransmission timeout rxrpc currently uses a fixed 4s retransmission timeout until the RTT is sufficiently sampled. This can cause problems with some fileservers with calls to the cache manager in the afs filesystem being dropped from the fileserver because a packet goes missing and the retransmission timeout is greater than the call expiry timeout. Fix this by: (1) Copying the RTT/RTO calculation code from Linux's TCP implementation and altering it to fit rxrpc. (2) Altering the various users of the RTT to make use of the new SRTT value. (3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO value instead (which is needed in jiffies), along with a backoff. Notes: (1) rxrpc provides RTT samples by matching the serial numbers on outgoing DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets against the reference serial number in incoming REQUESTED ACK and PING-RESPONSE ACK packets. (2) Each packet that is transmitted on an rxrpc connection gets a new per-connection serial number, even for retransmissions, so an ACK can be cross-referenced to a specific trigger packet. This allows RTT information to be drawn from retransmitted DATA packets also. (3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than on an rxrpc_call because many RPC calls won't live long enough to generate more than one sample. (4) The calculated SRTT value is in units of 8ths of a microsecond rather than nanoseconds. The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers. Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"") Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-11 21:54:34 +08:00
unsigned int rtt_count; /* Number of samples we've got */
u32 srtt_us; /* smoothed round trip time << 3 in usecs */
u32 mdev_us; /* medium deviation */
u32 mdev_max_us; /* maximal mdev for the last rtt period */
u32 rttvar_us; /* smoothed mdev_max */
u32 rto_j; /* Retransmission timeout in jiffies */
u8 backoff; /* Backoff timeout */
u8 cong_ssthresh; /* Congestion slow-start threshold */
};
/*
* Keys for matching a connection.
*/
struct rxrpc_conn_proto {
union {
struct {
u32 epoch; /* epoch of this connection */
u32 cid; /* connection ID */
};
u64 index_key;
};
};
struct rxrpc_conn_parameters {
struct rxrpc_local *local; /* Representation of local endpoint */
struct key *key; /* Security details */
bool exclusive; /* T if conn is exclusive */
bool upgrade; /* T if service ID can be upgraded */
u16 service_id; /* Service ID for this connection */
u32 security_level; /* Security level selected */
};
/*
* Call completion condition (state == RXRPC_CALL_COMPLETE).
*/
enum rxrpc_call_completion {
RXRPC_CALL_SUCCEEDED, /* - Normal termination */
RXRPC_CALL_REMOTELY_ABORTED, /* - call aborted by peer */
RXRPC_CALL_LOCALLY_ABORTED, /* - call aborted locally on error or close */
RXRPC_CALL_LOCAL_ERROR, /* - call failed due to local error */
RXRPC_CALL_NETWORK_ERROR, /* - call terminated by network error */
NR__RXRPC_CALL_COMPLETIONS
};
/*
* Bits in the connection flags.
*/
enum rxrpc_conn_flag {
rxrpc: Maintain an extra ref on a conn for the cache list Overhaul the usage count accounting for the rxrpc_connection struct to make it easier to implement RCU access from the data_ready handler. The problem is that currently we're using a lock to prevent the garbage collector from trying to clean up a connection that we're contemplating unidling. We could just stick incoming packets on the connection we find, but we've then got a problem that we may race when dispatching a work item to process it as we need to give that a ref to prevent the rxrpc_connection struct from disappearing in the meantime. Further, incoming packets may get discarded if attached to an rxrpc_connection struct that is going away. Whilst this is not a total disaster - the client will presumably resend - it would delay processing of the call. This would affect the AFS client filesystem's service manager operation. To this end: (1) We now maintain an extra count on the connection usage count whilst it is on the connection list. This mean it is not in use when its refcount is 1. (2) When trying to reuse an old connection, we only increment the refcount if it is greater than 0. If it is 0, we replace it in the tree with a new candidate connection. (3) Two connection flags are added to indicate whether or not a connection is in the local's client connection tree (used by sendmsg) or the peer's service connection tree (used by data_ready). This makes sure that we don't try and remove a connection if it got replaced. The flags are tested under lock with the removal operation to prevent the reaper from killing the rxrpc_connection struct whilst someone else is trying to effect a replacement. This could probably be alleviated by using memory barriers between the flag set/test and the rb_tree ops. The rb_tree op would still need to be under the lock, however. (4) When trying to reap an old connection, we try to flip the usage count from 1 to 0. If it's not 1 at that point, then it must've come back to life temporarily and we ignore it. Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-30 17:45:22 +08:00
RXRPC_CONN_IN_SERVICE_CONNS, /* Conn is in peer->service_conns */
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 14:30:52 +08:00
RXRPC_CONN_DONT_REUSE, /* Don't reuse this connection */
RXRPC_CONN_PROBING_FOR_UPGRADE, /* Probing for service upgrade */
RXRPC_CONN_FINAL_ACK_0, /* Need final ACK for channel 0 */
RXRPC_CONN_FINAL_ACK_1, /* Need final ACK for channel 1 */
RXRPC_CONN_FINAL_ACK_2, /* Need final ACK for channel 2 */
RXRPC_CONN_FINAL_ACK_3, /* Need final ACK for channel 3 */
};
#define RXRPC_CONN_FINAL_ACK_MASK ((1UL << RXRPC_CONN_FINAL_ACK_0) | \
(1UL << RXRPC_CONN_FINAL_ACK_1) | \
(1UL << RXRPC_CONN_FINAL_ACK_2) | \
(1UL << RXRPC_CONN_FINAL_ACK_3))
/*
* Events that can be raised upon a connection.
*/
enum rxrpc_conn_event {
RXRPC_CONN_EV_CHALLENGE, /* Send challenge packet */
RXRPC_CONN_EV_ABORT_CALLS, /* Abort attached calls */
};
/*
* The connection protocol state.
*/
enum rxrpc_conn_proto_state {
RXRPC_CONN_UNUSED, /* Connection not yet attempted */
RXRPC_CONN_CLIENT_UNSECURED, /* Client connection needs security init */
RXRPC_CONN_CLIENT, /* Client connection */
rxrpc: Preallocate peers, conns and calls for incoming service requests Make it possible for the data_ready handler called from the UDP transport socket to completely instantiate an rxrpc_call structure and make it immediately live by preallocating all the memory it might need. The idea is to cut out the background thread usage as much as possible. [Note that the preallocated structs are not actually used in this patch - that will be done in a future patch.] If insufficient resources are available in the preallocation buffers, it will be possible to discard the DATA packet in the data_ready handler or schedule a BUSY packet without the need to schedule an attempt at allocation in a background thread. To this end: (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a maximum number each of the listen backlog size. The backlog size is limited to a maxmimum of 32. Only this many of each can be in the preallocation buffer. (2) For userspace sockets, the preallocation is charged initially by listen() and will be recharged by accepting or rejecting pending new incoming calls. (3) For kernel services {,re,dis}charging of the preallocation buffers is handled manually. Two notifier callbacks have to be provided before kernel_listen() is invoked: (a) An indication that a new call has been instantiated. This can be used to trigger background recharging. (b) An indication that a call is being discarded. This is used when the socket is being released. A function, rxrpc_kernel_charge_accept() is called by the kernel service to preallocate a single call. It should be passed the user ID to be used for that call and a callback to associate the rxrpc call with the kernel service's side of the ID. (4) Discard the preallocation when the socket is closed. (5) Temporarily bump the refcount on the call allocated in rxrpc_incoming_call() so that rxrpc_release_call() can ditch the preallocation ref on service calls unconditionally. This will no longer be necessary once the preallocation is used. Note that this does not yet control the number of active service calls on a client - that will come in a later patch. A future development would be to provide a setsockopt() call that allows a userspace server to manually charge the preallocation buffer. This would allow user call IDs to be provided in advance and the awkward manual accept stage to be bypassed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
RXRPC_CONN_SERVICE_PREALLOC, /* Service connection preallocation */
RXRPC_CONN_SERVICE_UNSECURED, /* Service unsecured connection */
RXRPC_CONN_SERVICE_CHALLENGING, /* Service challenging for security */
RXRPC_CONN_SERVICE, /* Service secured connection */
RXRPC_CONN_ABORTED, /* Conn aborted */
RXRPC_CONN__NR_STATES
};
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
/*
* RxRPC client connection bundle.
*/
struct rxrpc_bundle {
struct rxrpc_local *local; /* Representation of local endpoint */
struct rxrpc_peer *peer; /* Remote endpoint */
struct key *key; /* Security details */
const struct rxrpc_security *security; /* applied security module */
refcount_t ref;
rxrpc: Fix race between conn bundle lookup and bundle removal [ZDI-CAN-15975] After rxrpc_unbundle_conn() has removed a connection from a bundle, it checks to see if there are any conns with available channels and, if not, removes and attempts to destroy the bundle. Whilst it does check after grabbing client_bundles_lock that there are no connections attached, this races with rxrpc_look_up_bundle() retrieving the bundle, but not attaching a connection for the connection to be attached later. There is therefore a window in which the bundle can get destroyed before we manage to attach a new connection to it. Fix this by adding an "active" counter to struct rxrpc_bundle: (1) rxrpc_connect_call() obtains an active count by prepping/looking up a bundle and ditches it before returning. (2) If, during rxrpc_connect_call(), a connection is added to the bundle, this obtains an active count, which is held until the connection is discarded. (3) rxrpc_deactivate_bundle() is created to drop an active count on a bundle and destroy it when the active count reaches 0. The active count is checked inside client_bundles_lock() to prevent a race with rxrpc_look_up_bundle(). (4) rxrpc_unbundle_conn() then calls rxrpc_deactivate_bundle(). Fixes: 245500d853e9 ("rxrpc: Rewrite the client connection manager") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-15975 Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: zdi-disclosures@trendmicro.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16 22:02:28 +08:00
atomic_t active; /* Number of active users */
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
unsigned int debug_id;
u32 security_level; /* Security level selected */
u16 service_id; /* Service ID for this connection */
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
bool try_upgrade; /* True if the bundle is attempting upgrade */
bool exclusive; /* T if conn is exclusive */
bool upgrade; /* T if service ID can be upgraded */
unsigned short alloc_error; /* Error from last conn allocation */
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
struct rb_node local_node; /* Node in local->client_conns */
struct list_head waiting_calls; /* Calls waiting for channels */
unsigned long avail_chans; /* Mask of available channels */
struct rxrpc_connection *conns[4]; /* The connections in the bundle (max 4) */
};
/*
* RxRPC connection definition
* - matched by { local, peer, epoch, conn_id, direction }
* - each connection can only handle four simultaneous calls
*/
struct rxrpc_connection {
struct rxrpc_conn_proto proto;
struct rxrpc_local *local; /* Representation of local endpoint */
struct rxrpc_peer *peer; /* Remote endpoint */
rxrpc: Don't hold a ref for connection workqueue Currently, rxrpc gives the connection's work item a ref on the connection when it queues it - and this is called from the timer expiration function. The problem comes when queue_work() fails (ie. the work item is already queued): the timer routine must put the ref - but this may cause the cleanup code to run. This has the unfortunate effect that the cleanup code may then be run in softirq context - which means that any spinlocks it might need to touch have to be guarded to disable softirqs (ie. they need a "_bh" suffix). (1) Don't give a ref to the work item. (2) Simplify handling of service connections by adding a separate active count so that the refcount isn't also used for this. (3) Connection destruction for both client and service connections can then be cleaned up by putting rxrpc_put_connection() out of line and making a tidy progression through the destruction code (offloaded to a workqueue if put from softirq or processor function context). The RCU part of the cleanup then only deals with the freeing at the end. (4) Make rxrpc_queue_conn() return immediately if it sees the active count is -1 rather then queuing the connection. (5) Make sure that the cleanup routine waits for the work item to complete. (6) Stash the rxrpc_net pointer in the conn struct so that the rcu free routine can use it, even if the local endpoint has been freed. Unfortunately, neither the timer nor the work item can simply get around the problem by just using refcount_inc_not_zero() as the waits would still have to be done, and there would still be the possibility of having to put the ref in the expiration function. Note the connection work item is mostly going to go away with the main event work being transferred to the I/O thread, so the wait in (6) will become obsolete. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-11-25 20:43:50 +08:00
struct rxrpc_net *rxnet; /* Network namespace to which call belongs */
struct key *key; /* Security details */
struct list_head attend_link; /* Link in local->conn_attend_q */
refcount_t ref;
rxrpc: Don't hold a ref for connection workqueue Currently, rxrpc gives the connection's work item a ref on the connection when it queues it - and this is called from the timer expiration function. The problem comes when queue_work() fails (ie. the work item is already queued): the timer routine must put the ref - but this may cause the cleanup code to run. This has the unfortunate effect that the cleanup code may then be run in softirq context - which means that any spinlocks it might need to touch have to be guarded to disable softirqs (ie. they need a "_bh" suffix). (1) Don't give a ref to the work item. (2) Simplify handling of service connections by adding a separate active count so that the refcount isn't also used for this. (3) Connection destruction for both client and service connections can then be cleaned up by putting rxrpc_put_connection() out of line and making a tidy progression through the destruction code (offloaded to a workqueue if put from softirq or processor function context). The RCU part of the cleanup then only deals with the freeing at the end. (4) Make rxrpc_queue_conn() return immediately if it sees the active count is -1 rather then queuing the connection. (5) Make sure that the cleanup routine waits for the work item to complete. (6) Stash the rxrpc_net pointer in the conn struct so that the rcu free routine can use it, even if the local endpoint has been freed. Unfortunately, neither the timer nor the work item can simply get around the problem by just using refcount_inc_not_zero() as the waits would still have to be done, and there would still be the possibility of having to put the ref in the expiration function. Note the connection work item is mostly going to go away with the main event work being transferred to the I/O thread, so the wait in (6) will become obsolete. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-11-25 20:43:50 +08:00
atomic_t active; /* Active count for service conns */
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 14:30:52 +08:00
struct rcu_head rcu;
struct list_head cache_link;
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 21:39:44 +08:00
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
unsigned char act_chans; /* Mask of active channels */
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 21:39:44 +08:00
struct rxrpc_channel {
unsigned long final_ack_at; /* Time at which to issue final ACK */
struct rxrpc_call *call; /* Active call */
unsigned int call_debug_id; /* call->debug_id */
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 21:39:44 +08:00
u32 call_id; /* ID of current call */
u32 call_counter; /* Call ID counter */
u32 last_call; /* ID of last call */
u8 last_type; /* Type of last packet */
union {
u32 last_seq;
u32 last_abort;
};
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 21:39:44 +08:00
} channels[RXRPC_MAXCALLS];
struct timer_list timer; /* Conn event timer */
struct work_struct processor; /* connection event processor */
rxrpc: Don't hold a ref for connection workqueue Currently, rxrpc gives the connection's work item a ref on the connection when it queues it - and this is called from the timer expiration function. The problem comes when queue_work() fails (ie. the work item is already queued): the timer routine must put the ref - but this may cause the cleanup code to run. This has the unfortunate effect that the cleanup code may then be run in softirq context - which means that any spinlocks it might need to touch have to be guarded to disable softirqs (ie. they need a "_bh" suffix). (1) Don't give a ref to the work item. (2) Simplify handling of service connections by adding a separate active count so that the refcount isn't also used for this. (3) Connection destruction for both client and service connections can then be cleaned up by putting rxrpc_put_connection() out of line and making a tidy progression through the destruction code (offloaded to a workqueue if put from softirq or processor function context). The RCU part of the cleanup then only deals with the freeing at the end. (4) Make rxrpc_queue_conn() return immediately if it sees the active count is -1 rather then queuing the connection. (5) Make sure that the cleanup routine waits for the work item to complete. (6) Stash the rxrpc_net pointer in the conn struct so that the rcu free routine can use it, even if the local endpoint has been freed. Unfortunately, neither the timer nor the work item can simply get around the problem by just using refcount_inc_not_zero() as the waits would still have to be done, and there would still be the possibility of having to put the ref in the expiration function. Note the connection work item is mostly going to go away with the main event work being transferred to the I/O thread, so the wait in (6) will become obsolete. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-11-25 20:43:50 +08:00
struct work_struct destructor; /* In-process-context destroyer */
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
struct rxrpc_bundle *bundle; /* Client connection bundle */
struct rb_node service_node; /* Node in peer->service_conns */
struct list_head proc_link; /* link in procfs list */
struct list_head link; /* link in master connection list */
struct sk_buff_head rx_queue; /* received conn-level packets */
struct mutex security_lock; /* Lock for security management */
const struct rxrpc_security *security; /* applied security module */
union {
struct {
struct crypto_sync_skcipher *cipher; /* encryption handle */
struct rxrpc_crypt csum_iv; /* packet checksum base */
u32 nonce; /* response re-use preventer */
} rxkad;
};
2016-04-04 21:00:37 +08:00
unsigned long flags;
unsigned long events;
unsigned long idle_timestamp; /* Time at which last became idle */
spinlock_t state_lock; /* state-change lock */
enum rxrpc_conn_proto_state state; /* current state of connection */
enum rxrpc_call_completion completion; /* Completion condition */
s32 abort_code; /* Abort code of connection abort */
int debug_id; /* debug ID for printks */
atomic_t serial; /* packet serial number counter */
unsigned int hi_serial; /* highest serial number received */
rxrpc: Fix the packet reception routine The rxrpc_input_packet() function and its call tree was built around the assumption that data_ready() handler called from UDP to inform a kernel service that there is data to be had was non-reentrant. This means that certain locking could be dispensed with. This, however, turns out not to be the case with a multi-queue network card that can deliver packets to multiple cpus simultaneously. Each of those cpus can be in the rxrpc_input_packet() function at the same time. Fix by adding or changing some structure members: (1) Add peer->rtt_input_lock to serialise access to the RTT buffer. (2) Make conn->service_id into a 32-bit variable so that it can be cmpxchg'd on all arches. (3) Add call->input_lock to serialise access to the Rx/Tx state. Note that although the Rx and Tx states are (almost) entirely separate, there's no point completing the separation and having separate locks since it's a bi-phasal RPC protocol rather than a bi-direction streaming protocol. Data transmission and data reception do not take place simultaneously on any particular call. and making the following functional changes: (1) In rxrpc_input_data(), hold call->input_lock around the core to prevent simultaneous producing of packets into the Rx ring and updating of tracking state for a particular call. (2) In rxrpc_input_ping_response(), only read call->ping_serial once, and check it before checking RXRPC_CALL_PINGING as that's a cheaper test. The bit test and bit clear can then be combined. No further locking is needed here. (3) In rxrpc_input_ack(), take call->input_lock after we've parsed much of the ACK packet. The superseded ACK check is then done both before and after the lock is taken. The handing of ackinfo data is split, parsing before the lock is taken and processing with it held. This is keyed on rxMTU being non-zero. Congestion management is also done within the locked section. (4) In rxrpc_input_ackall(), take call->input_lock around the Tx window rotation. The ACKALL packet carries no information and is only really useful after all packets have been transmitted since it's imprecise. (5) In rxrpc_input_implicit_end_call(), we use rx->incoming_lock to prevent calls being simultaneously implicitly ended on two cpus and also to prevent any races with incoming call setup. (6) In rxrpc_input_packet(), use cmpxchg() to effect the service upgrade on a connection. It is only permitted to happen once for a connection. (7) In rxrpc_new_incoming_call(), we have to recheck the routing inside rx->incoming_lock to see if someone else set up the call, connection or peer whilst we were getting there. We can't trust the values from the earlier routing check unless we pin refs on them - which we want to avoid. Further, we need to allow for an incoming call to have its state changed on another CPU between us making it live and us adjusting it because the conn is now in the RXRPC_CONN_SERVICE state. (8) In rxrpc_peer_add_rtt(), take peer->rtt_input_lock around the access to the RTT buffer. Don't need to lock around setting peer->rtt. For reference, the inventory of state-accessing or state-altering functions used by the packet input procedure is: > rxrpc_input_packet() * PACKET CHECKING * ROUTING > rxrpc_post_packet_to_local() > rxrpc_find_connection_rcu() - uses RCU > rxrpc_lookup_peer_rcu() - uses RCU > rxrpc_find_service_conn_rcu() - uses RCU > idr_find() - uses RCU * CONNECTION-LEVEL PROCESSING - Service upgrade - Can only happen once per conn ! Changed to use cmpxchg > rxrpc_post_packet_to_conn() - Setting conn->hi_serial - Probably safe not using locks - Maybe use cmpxchg * CALL-LEVEL PROCESSING > Old-call checking > rxrpc_input_implicit_end_call() > rxrpc_call_completed() > rxrpc_queue_call() ! Need to take rx->incoming_lock > __rxrpc_disconnect_call() > rxrpc_notify_socket() > rxrpc_new_incoming_call() - Uses rx->incoming_lock for the entire process - Might be able to drop this earlier in favour of the call lock > rxrpc_incoming_call() ! Conflicts with rxrpc_input_implicit_end_call() > rxrpc_send_ping() - Don't need locks to check rtt state > rxrpc_propose_ACK * PACKET DISTRIBUTION > rxrpc_input_call_packet() > rxrpc_input_data() * QUEUE DATA PACKET ON CALL > rxrpc_reduce_call_timer() - Uses timer_reduce() ! Needs call->input_lock() > rxrpc_receiving_reply() ! Needs locking around ack state > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_proto_abort() > rxrpc_input_dup_data() - Fills the Rx buffer - rxrpc_propose_ACK() - rxrpc_notify_socket() > rxrpc_input_ack() * APPLY ACK PACKET TO CALL AND DISCARD PACKET > rxrpc_input_ping_response() - Probably doesn't need any extra locking ! Need READ_ONCE() on call->ping_serial > rxrpc_input_check_for_lost_ack() - Takes call->lock to consult Tx buffer > rxrpc_peer_add_rtt() ! Needs to take a lock (peer->rtt_input_lock) ! Could perhaps manage with cmpxchg() and xadd() instead > rxrpc_input_requested_ack - Consults Tx buffer ! Probably needs a lock > rxrpc_peer_add_rtt() > rxrpc_propose_ack() > rxrpc_input_ackinfo() - Changes call->tx_winsize ! Use cmpxchg to handle change ! Should perhaps track serial number - Uses peer->lock to record MTU specification changes > rxrpc_proto_abort() ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_input_soft_acks() - Consults the Tx buffer > rxrpc_congestion_management() - Modifies the Tx annotations ! Needs call->input_lock() > rxrpc_queue_call() > rxrpc_input_abort() * APPLY ABORT PACKET TO CALL AND DISCARD PACKET > rxrpc_set_call_completion() > rxrpc_notify_socket() > rxrpc_input_ackall() * APPLY ACKALL PACKET TO CALL AND DISCARD PACKET ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_reject_packet() There are some functions used by the above that queue the packet, after which the procedure is terminated: - rxrpc_post_packet_to_local() - local->event_queue is an sk_buff_head - local->processor is a work_struct - rxrpc_post_packet_to_conn() - conn->rx_queue is an sk_buff_head - conn->processor is a work_struct - rxrpc_reject_packet() - local->reject_queue is an sk_buff_head - local->processor is a work_struct And some that offload processing to process context: - rxrpc_notify_socket() - Uses RCU lock - Uses call->notify_lock to call call->notify_rx - Uses call->recvmsg_lock to queue recvmsg side - rxrpc_queue_call() - call->processor is a work_struct - rxrpc_propose_ACK() - Uses call->lock to wrap __rxrpc_propose_ACK() And a bunch that complete a call, all of which use call->state_lock to protect the call state: - rxrpc_call_completed() - rxrpc_set_call_completion() - rxrpc_abort_call() - rxrpc_proto_abort() - Also uses rxrpc_queue_call() Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-08 22:46:25 +08:00
u32 service_id; /* Service ID, possibly upgraded */
u32 security_level; /* Security level selected */
u8 security_ix; /* security type */
u8 out_clientflag; /* RXRPC_CLIENT_INITIATED if we are client */
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
u8 bundle_shift; /* Index into bundle->avail_chans */
bool exclusive; /* T if conn is exclusive */
bool upgrade; /* T if service ID can be upgraded */
u16 orig_service_id; /* Originally requested service ID */
short error; /* Local error code */
};
static inline bool rxrpc_to_server(const struct rxrpc_skb_priv *sp)
{
return sp->hdr.flags & RXRPC_CLIENT_INITIATED;
}
static inline bool rxrpc_to_client(const struct rxrpc_skb_priv *sp)
{
return !rxrpc_to_server(sp);
}
/*
* Flags in call->flags.
*/
enum rxrpc_call_flag {
RXRPC_CALL_RELEASED, /* call has been released - no more message to userspace */
RXRPC_CALL_HAS_USERID, /* has a user ID attached */
RXRPC_CALL_IS_SERVICE, /* Call is service call */
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 14:30:52 +08:00
RXRPC_CALL_EXPOSED, /* The call was exposed to the world */
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
RXRPC_CALL_RX_LAST, /* Received the last packet (at rxtx_top) */
RXRPC_CALL_TX_LAST, /* Last packet in Tx buffer (at rxtx_top) */
rxrpc: Don't use a ring buffer for call Tx queue Change the way the Tx queueing works to make the following ends easier to achieve: (1) The filling of packets, the encryption of packets and the transmission of packets can be handled in parallel by separate threads, rather than rxrpc_sendmsg() allocating, filling, encrypting and transmitting each packet before moving onto the next one. (2) Get rid of the fixed-size ring which sets a hard limit on the number of packets that can be retained in the ring. This allows the number of packets to increase without having to allocate a very large ring or having variable-sized rings. [Note: the downside of this is that it's then less efficient to locate a packet for retransmission as we then have to step through a list and examine each buffer in the list.] (3) Allow the filler/encrypter to run ahead of the transmission window. (4) Make it easier to do zero copy UDP from the packet buffers. (5) Make it easier to do zero copy from userspace to the packet buffers - and thence to UDP (only if for unauthenticated connections). To that end, the following changes are made: (1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets to be transmitted in. This allows them to be placed on multiple queues simultaneously. An sk_buff isn't really necessary as it's never passed on to lower-level networking code. (2) Keep the transmissable packets in a linked list on the call struct rather than in a ring. As a consequence, the annotation buffer isn't used either; rather a flag is set on the packet to indicate ackedness. (3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate that all packets up to and including the last got hard acked. (4) Wire headers are now stored in the txbuf rather than being concocted on the stack and they're stored immediately before the data, thereby allowing zerocopy of a single span. (5) Don't bother with instant-resend on transmission failure; rather, leave it for a timer or an ACK packet to trigger. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-04-01 06:55:08 +08:00
RXRPC_CALL_TX_ALL_ACKED, /* Last packet has been hard-acked */
RXRPC_CALL_SEND_PING, /* A ping will need to be sent */
RXRPC_CALL_RETRANS_TIMEOUT, /* Retransmission due to timeout occurred */
RXRPC_CALL_BEGAN_RX_TIMER, /* We began the expect_rx_by timer */
rxrpc: Fix handling of call quietly cancelled out on server Sometimes an in-progress call will stop responding on the fileserver when the fileserver quietly cancels the call with an internally marked abort (RX_CALL_DEAD), without sending an ABORT to the client. This causes the client's call to eventually expire from lack of incoming packets directed its way, which currently leads to it being cancelled locally with ETIME. Note that it's not currently clear as to why this happens as it's really hard to reproduce. The rotation policy implement by kAFS, however, doesn't differentiate between ETIME meaning we didn't get any response from the server and ETIME meaning the call got cancelled mid-flow. The latter leads to an oops when fetching data as the rotation partially resets the afs_read descriptor, which can result in a cleared page pointer being dereferenced because that page has already been filled. Handle this by the following means: (1) Set a flag on a call when we receive a packet for it. (2) Store the highest packet serial number so far received for a call (bearing in mind this may wrap). (3) If, when the "not received anything recently" timeout expires on a call, we've received at least one packet for a call and the connection as a whole has received packets more recently than that call, then cancel the call locally with ECONNRESET rather than ETIME. This indicates that the call was definitely in progress on the server. (4) In kAFS, if the rotation algorithm sees ECONNRESET rather than ETIME, don't try the next server, but rather abort the call. This avoids the oops as we don't try to reuse the afs_read struct. Rather, as-yet ungotten pages will be reread at a later data. Also: (5) Add an rxrpc tracepoint to log detection of the call being reset. Without this, I occasionally see an oops like the following: general protection fault: 0000 [#1] SMP PTI ... RIP: 0010:_copy_to_iter+0x204/0x310 RSP: 0018:ffff8800cae0f828 EFLAGS: 00010206 RAX: 0000000000000560 RBX: 0000000000000560 RCX: 0000000000000560 RDX: ffff8800cae0f968 RSI: ffff8800d58b3312 RDI: 0005080000000000 RBP: ffff8800cae0f968 R08: 0000000000000560 R09: ffff8800ca00f400 R10: ffff8800c36f28d4 R11: 00000000000008c4 R12: ffff8800cae0f958 R13: 0000000000000560 R14: ffff8800d58b3312 R15: 0000000000000560 FS: 00007fdaef108080(0000) GS:ffff8800ca680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb28a8fa000 CR3: 00000000d2a76002 CR4: 00000000001606e0 Call Trace: skb_copy_datagram_iter+0x14e/0x289 rxrpc_recvmsg_data.isra.0+0x6f3/0xf68 ? trace_buffer_unlock_commit_regs+0x4f/0x89 rxrpc_kernel_recv_data+0x149/0x421 afs_extract_data+0x1e0/0x798 ? afs_wait_for_call_to_complete+0xc9/0x52e afs_deliver_fs_fetch_data+0x33a/0x5ab afs_deliver_to_call+0x1ee/0x5e0 ? afs_wait_for_call_to_complete+0xc9/0x52e afs_wait_for_call_to_complete+0x12b/0x52e ? wake_up_q+0x54/0x54 afs_make_call+0x287/0x462 ? afs_fs_fetch_data+0x3e6/0x3ed ? rcu_read_lock_sched_held+0x5d/0x63 afs_fs_fetch_data+0x3e6/0x3ed afs_fetch_data+0xbb/0x14a afs_readpages+0x317/0x40d __do_page_cache_readahead+0x203/0x2ba ? ondemand_readahead+0x3a7/0x3c1 ondemand_readahead+0x3a7/0x3c1 generic_file_buffered_read+0x18b/0x62f __vfs_read+0xdb/0xfe vfs_read+0xb2/0x137 ksys_read+0x50/0x8c do_syscall_64+0x7d/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note the weird value in RDI which is a result of trying to kmap() a NULL page pointer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03 09:17:39 +08:00
RXRPC_CALL_RX_HEARD, /* The peer responded at least once to this call */
RXRPC_CALL_DISCONNECTED, /* The call has been disconnected */
RXRPC_CALL_KERNEL, /* The call was made by the kernel */
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
RXRPC_CALL_UPGRADE, /* Service upgrade was requested for the call */
RXRPC_CALL_EXCLUSIVE, /* The call uses a once-only connection */
RXRPC_CALL_RX_IS_IDLE, /* recvmsg() is idle - send an ACK */
RXRPC_CALL_RECVMSG_READ_ALL, /* recvmsg() read all of the received data */
};
/*
* Events that can be raised on a call.
*/
enum rxrpc_call_event {
RXRPC_CALL_EV_ACK_LOST, /* ACK may be lost, send ping */
RXRPC_CALL_EV_INITIAL_PING, /* Send initial ping for a new service call */
};
/*
* The states that a call can be in.
*/
enum rxrpc_call_state {
RXRPC_CALL_UNINITIALISED,
RXRPC_CALL_CLIENT_AWAIT_CONN, /* - client waiting for connection to become available */
RXRPC_CALL_CLIENT_SEND_REQUEST, /* - client sending request phase */
RXRPC_CALL_CLIENT_AWAIT_REPLY, /* - client awaiting reply */
RXRPC_CALL_CLIENT_RECV_REPLY, /* - client receiving reply phase */
rxrpc: Preallocate peers, conns and calls for incoming service requests Make it possible for the data_ready handler called from the UDP transport socket to completely instantiate an rxrpc_call structure and make it immediately live by preallocating all the memory it might need. The idea is to cut out the background thread usage as much as possible. [Note that the preallocated structs are not actually used in this patch - that will be done in a future patch.] If insufficient resources are available in the preallocation buffers, it will be possible to discard the DATA packet in the data_ready handler or schedule a BUSY packet without the need to schedule an attempt at allocation in a background thread. To this end: (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a maximum number each of the listen backlog size. The backlog size is limited to a maxmimum of 32. Only this many of each can be in the preallocation buffer. (2) For userspace sockets, the preallocation is charged initially by listen() and will be recharged by accepting or rejecting pending new incoming calls. (3) For kernel services {,re,dis}charging of the preallocation buffers is handled manually. Two notifier callbacks have to be provided before kernel_listen() is invoked: (a) An indication that a new call has been instantiated. This can be used to trigger background recharging. (b) An indication that a call is being discarded. This is used when the socket is being released. A function, rxrpc_kernel_charge_accept() is called by the kernel service to preallocate a single call. It should be passed the user ID to be used for that call and a callback to associate the rxrpc call with the kernel service's side of the ID. (4) Discard the preallocation when the socket is closed. (5) Temporarily bump the refcount on the call allocated in rxrpc_incoming_call() so that rxrpc_release_call() can ditch the preallocation ref on service calls unconditionally. This will no longer be necessary once the preallocation is used. Note that this does not yet control the number of active service calls on a client - that will come in a later patch. A future development would be to provide a setsockopt() call that allows a userspace server to manually charge the preallocation buffer. This would allow user call IDs to be provided in advance and the awkward manual accept stage to be bypassed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
RXRPC_CALL_SERVER_PREALLOC, /* - service preallocation */
RXRPC_CALL_SERVER_SECURING, /* - server securing request connection */
RXRPC_CALL_SERVER_RECV_REQUEST, /* - server receiving request */
RXRPC_CALL_SERVER_ACK_REQUEST, /* - server pending ACK of request */
RXRPC_CALL_SERVER_SEND_REPLY, /* - server sending reply */
RXRPC_CALL_SERVER_AWAIT_ACK, /* - server awaiting final ACK */
RXRPC_CALL_COMPLETE, /* - call complete */
NR__RXRPC_CALL_STATES
};
/*
* Call Tx congestion management modes.
*/
enum rxrpc_congest_mode {
RXRPC_CALL_SLOW_START,
RXRPC_CALL_CONGEST_AVOIDANCE,
RXRPC_CALL_PACKET_LOSS,
RXRPC_CALL_FAST_RETRANSMIT,
NR__RXRPC_CONGEST_MODES
};
/*
* RxRPC call definition
* - matched by { connection, call_id }
*/
struct rxrpc_call {
struct rcu_head rcu;
struct rxrpc_connection *conn; /* connection carrying call */
struct rxrpc_bundle *bundle; /* Connection bundle to use */
struct rxrpc_peer *peer; /* Peer record for remote address */
struct rxrpc_local *local; /* Representation of local endpoint */
rxrpc: Calls shouldn't hold socket refs rxrpc calls shouldn't hold refs on the sock struct. This was done so that the socket wouldn't go away whilst the call was in progress, such that the call could reach the socket's queues. However, we can mark the socket as requiring an RCU release and rely on the RCU read lock. To make this work, we do: (1) rxrpc_release_call() removes the call's call user ID. This is now only called from socket operations and not from the call processor: rxrpc_accept_call() / rxrpc_kernel_accept_call() rxrpc_reject_call() / rxrpc_kernel_reject_call() rxrpc_kernel_end_call() rxrpc_release_calls_on_socket() rxrpc_recvmsg() Though it is also called in the cleanup path of rxrpc_accept_incoming_call() before we assign a user ID. (2) Pass the socket pointer into rxrpc_release_call() rather than getting it from the call so that we can get rid of uninitialised calls. (3) Fix call processor queueing to pass a ref to the work queue and to release that ref at the end of the processor function (or to pass it back to the work queue if we have to requeue). (4) Skip out of the call processor function asap if the call is complete and don't requeue it if the call is complete. (5) Clean up the call immediately that the refcount reaches 0 rather than trying to defer it. Actual deallocation is deferred to RCU, however. (6) Don't hold socket refs for allocated calls. (7) Use the RCU read lock when queueing a message on a socket and treat the call's socket pointer according to RCU rules and check it for NULL. We also need to use the RCU read lock when viewing a call through procfs. (8) Transmit the final ACK/ABORT to a client call in rxrpc_release_call() if this hasn't been done yet so that we can then disconnect the call. Once the call is disconnected, it won't have any access to the connection struct and the UDP socket for the call work processor to be able to send the ACK. Terminal retransmission will be handled by the connection processor. (9) Release all calls immediately on the closing of a socket rather than trying to defer this. Incomplete calls will be aborted. The call refcount model is much simplified. Refs are held on the call by: (1) A socket's user ID tree. (2) A socket's incoming call secureq and acceptq. (3) A kernel service that has a call in progress. (4) A queued call work processor. We have to take care to put any call that we failed to queue. (5) sk_buffs on a socket's receive queue. A future patch will get rid of this. Whilst we're at it, we can do: (1) Get rid of the RXRPC_CALL_EV_RELEASE event. Release is now done entirely from the socket routines and never from the call's processor. (2) Get rid of the RXRPC_CALL_DEAD state. Calls now end in the RXRPC_CALL_COMPLETE state. (3) Get rid of the rxrpc_call::destroyer work item. Calls are now torn down when their refcount reaches 0 and then handed over to RCU for final cleanup. (4) Get rid of the rxrpc_call::deadspan timer. Calls are cleaned up immediately they're finished with and don't hang around. Post-completion retransmission is handled by the connection processor once the call is disconnected. (5) Get rid of the dead call expiry setting as there's no longer a timer to set. (6) rxrpc_destroy_all_calls() can just check that the call list is empty. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-07 16:19:31 +08:00
struct rxrpc_sock __rcu *socket; /* socket responsible */
struct rxrpc_net *rxnet; /* Network namespace to which call belongs */
struct key *key; /* Security details */
const struct rxrpc_security *security; /* applied security module */
rxrpc: Fix deadlock between call creation and sendmsg/recvmsg All the routines by which rxrpc is accessed from the outside are serialised by means of the socket lock (sendmsg, recvmsg, bind, rxrpc_kernel_begin_call(), ...) and this presents a problem: (1) If a number of calls on the same socket are in the process of connection to the same peer, a maximum of four concurrent live calls are permitted before further calls need to wait for a slot. (2) If a call is waiting for a slot, it is deep inside sendmsg() or rxrpc_kernel_begin_call() and the entry function is holding the socket lock. (3) sendmsg() and recvmsg() or the in-kernel equivalents are prevented from servicing the other calls as they need to take the socket lock to do so. (4) The socket is stuck until a call is aborted and makes its slot available to the waiter. Fix this by: (1) Provide each call with a mutex ('user_mutex') that arbitrates access by the users of rxrpc separately for each specific call. (2) Make rxrpc_sendmsg() and rxrpc_recvmsg() unlock the socket as soon as they've got a call and taken its mutex. Note that I'm returning EWOULDBLOCK from recvmsg() if MSG_DONTWAIT is set but someone else has the lock. Should I instead only return EWOULDBLOCK if there's nothing currently to be done on a socket, and sleep in this particular instance because there is something to be done, but we appear to be blocked by the interrupt handler doing its ping? (3) Make rxrpc_new_client_call() unlock the socket after allocating a new call, locking its user mutex and adding it to the socket's call tree. The call is returned locked so that sendmsg() can add data to it immediately. From the moment the call is in the socket tree, it is subject to access by sendmsg() and recvmsg() - even if it isn't connected yet. (4) Lock new service calls in the UDP data_ready handler (in rxrpc_new_incoming_call()) because they may already be in the socket's tree and the data_ready handler makes them live immediately if a user ID has already been preassigned. Note that the new call is locked before any notifications are sent that it is live, so doing mutex_trylock() *ought* to always succeed. Userspace is prevented from doing sendmsg() on calls that are in a too-early state in rxrpc_do_sendmsg(). (5) Make rxrpc_new_incoming_call() return the call with the user mutex held so that a ping can be scheduled immediately under it. Note that it might be worth moving the ping call into rxrpc_new_incoming_call() and then we can drop the mutex there. (6) Make rxrpc_accept_call() take the lock on the call it is accepting and release the socket after adding the call to the socket's tree. This is slightly tricky as we've dequeued the call by that point and have to requeue it. Note that requeuing emits a trace event. (7) Make rxrpc_kernel_send_data() and rxrpc_kernel_recv_data() take the new mutex immediately and don't bother with the socket mutex at all. This patch has the nice bonus that calls on the same socket are now to some extent parallelisable. Note that we might want to move rxrpc_service_prealloc() calls out from the socket lock and give it its own lock, so that we don't hang progress in other calls because we're waiting for the allocator. We probably also want to avoid calling rxrpc_notify_socket() from within the socket lock (rxrpc_accept_call()). Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.c.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-27 23:43:06 +08:00
struct mutex user_mutex; /* User access mutex */
struct sockaddr_rxrpc dest_srx; /* Destination address */
unsigned long delay_ack_at; /* When DELAY ACK needs to happen */
unsigned long ack_lost_at; /* When ACK is figured as lost */
rxrpc: Fix call timeouts Fix the rxrpc call expiration timeouts and make them settable from userspace. By analogy with other rx implementations, there should be three timeouts: (1) "Normal timeout" This is set for all calls and is triggered if we haven't received any packets from the peer in a while. It is measured from the last time we received any packet on that call. This is not reset by any connection packets (such as CHALLENGE/RESPONSE packets). If a service operation takes a long time, the server should generate PING ACKs at a duration that's substantially less than the normal timeout so is to keep both sides alive. This is set at 1/6 of normal timeout. (2) "Idle timeout" This is set only for a service call and is triggered if we stop receiving the DATA packets that comprise the request data. It is measured from the last time we received a DATA packet. (3) "Hard timeout" This can be set for a call and specified the maximum lifetime of that call. It should not be specified by default. Some operations (such as volume transfer) take a long time. Allow userspace to set/change the timeouts on a call with sendmsg, using a control message: RXRPC_SET_CALL_TIMEOUTS The data to the message is a number of 32-bit words, not all of which need be given: u32 hard_timeout; /* sec from first packet */ u32 idle_timeout; /* msec from packet Rx */ u32 normal_timeout; /* msec from data Rx */ This can be set in combination with any other sendmsg() that affects a call. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 18:18:41 +08:00
unsigned long resend_at; /* When next resend needs to happen */
unsigned long ping_at; /* When next to send a ping */
unsigned long keepalive_at; /* When next to send a keepalive ping */
rxrpc: Fix call timeouts Fix the rxrpc call expiration timeouts and make them settable from userspace. By analogy with other rx implementations, there should be three timeouts: (1) "Normal timeout" This is set for all calls and is triggered if we haven't received any packets from the peer in a while. It is measured from the last time we received any packet on that call. This is not reset by any connection packets (such as CHALLENGE/RESPONSE packets). If a service operation takes a long time, the server should generate PING ACKs at a duration that's substantially less than the normal timeout so is to keep both sides alive. This is set at 1/6 of normal timeout. (2) "Idle timeout" This is set only for a service call and is triggered if we stop receiving the DATA packets that comprise the request data. It is measured from the last time we received a DATA packet. (3) "Hard timeout" This can be set for a call and specified the maximum lifetime of that call. It should not be specified by default. Some operations (such as volume transfer) take a long time. Allow userspace to set/change the timeouts on a call with sendmsg, using a control message: RXRPC_SET_CALL_TIMEOUTS The data to the message is a number of 32-bit words, not all of which need be given: u32 hard_timeout; /* sec from first packet */ u32 idle_timeout; /* msec from packet Rx */ u32 normal_timeout; /* msec from data Rx */ This can be set in combination with any other sendmsg() that affects a call. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 18:18:41 +08:00
unsigned long expect_rx_by; /* When we expect to get a packet by */
unsigned long expect_req_by; /* When we expect to get a request DATA packet by */
unsigned long expect_term_by; /* When we expect call termination by */
u32 next_rx_timo; /* Timeout for next Rx packet (jif) */
u32 next_req_timo; /* Timeout for next Rx request packet (jif) */
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
struct timer_list timer; /* Combined event timer */
rxrpc: Don't hold a ref for call timer or workqueue Currently, rxrpc gives the call timer a ref on the call when it starts it and this is passed along to the workqueue by the timer expiration function. The problem comes when queue_work() fails (ie. the work item is already queued): the timer routine must put the ref - but this may cause the cleanup code to run. This has the unfortunate effect that the cleanup code may then be run in softirq context - which means that any spinlocks it might need to touch have to be guarded to disable softirqs (ie. they need a "_bh" suffix). Fix this by: (1) Don't give a ref to the timer. (2) Making the expiration function not do anything if the refcount is 0. Note that this is more of an optimisation. (3) Make sure that the cleanup routine waits for timer to complete. However, this has a consequence that timer cannot give a ref to the work item. Therefore the following fixes are also necessary: (4) Don't give a ref to the work item. (5) Make the work item return asap if it sees the ref count is 0. (6) Make sure that the cleanup routine waits for the work item to complete. Unfortunately, neither the timer nor the work item can simply get around the problem by just using refcount_inc_not_zero() as the waits would still have to be done, and there would still be the possibility of having to put the ref in the expiration function. Note the call work item is going to go away with the work being transferred to the I/O thread, so the wait in (6) will become obsolete. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-11-25 17:00:55 +08:00
struct work_struct destroyer; /* In-process-context destroyer */
rxrpc: Don't expose skbs to in-kernel users [ver #2] Don't expose skbs to in-kernel users, such as the AFS filesystem, but instead provide a notification hook the indicates that a call needs attention and another that indicates that there's a new call to be collected. This makes the following possibilities more achievable: (1) Call refcounting can be made simpler if skbs don't hold refs to calls. (2) skbs referring to non-data events will be able to be freed much sooner rather than being queued for AFS to pick up as rxrpc_kernel_recv_data will be able to consult the call state. (3) We can shortcut the receive phase when a call is remotely aborted because we don't have to go through all the packets to get to the one cancelling the operation. (4) It makes it easier to do encryption/decryption directly between AFS's buffers and sk_buffs. (5) Encryption/decryption can more easily be done in the AFS's thread contexts - usually that of the userspace process that issued a syscall - rather than in one of rxrpc's background threads on a workqueue. (6) AFS will be able to wait synchronously on a call inside AF_RXRPC. To make this work, the following interface function has been added: int rxrpc_kernel_recv_data( struct socket *sock, struct rxrpc_call *call, void *buffer, size_t bufsize, size_t *_offset, bool want_more, u32 *_abort_code); This is the recvmsg equivalent. It allows the caller to find out about the state of a specific call and to transfer received data into a buffer piecemeal. afs_extract_data() and rxrpc_kernel_recv_data() now do all the extraction logic between them. They don't wait synchronously yet because the socket lock needs to be dealt with. Five interface functions have been removed: rxrpc_kernel_is_data_last() rxrpc_kernel_get_abort_code() rxrpc_kernel_get_error_number() rxrpc_kernel_free_skb() rxrpc_kernel_data_consumed() As a temporary hack, sk_buffs going to an in-kernel call are queued on the rxrpc_call struct (->knlrecv_queue) rather than being handed over to the in-kernel user. To process the queue internally, a temporary function, temp_deliver_data() has been added. This will be replaced with common code between the rxrpc_recvmsg() path and the kernel_rxrpc_recv_data() path in a future patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 03:42:14 +08:00
rxrpc_notify_rx_t notify_rx; /* kernel service Rx notification function */
struct list_head link; /* link in master call list */
struct list_head wait_link; /* Link in local->new_client_calls */
struct hlist_node error_link; /* link in error distribution list */
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
struct list_head accept_link; /* Link in rx->acceptq */
struct list_head recvmsg_link; /* Link in rx->recvmsg_q */
struct list_head sock_link; /* Link in rx->sock_calls */
struct rb_node sock_node; /* Node in rx->calls */
struct list_head attend_link; /* Link in local->call_attend_q */
rxrpc: Don't use a ring buffer for call Tx queue Change the way the Tx queueing works to make the following ends easier to achieve: (1) The filling of packets, the encryption of packets and the transmission of packets can be handled in parallel by separate threads, rather than rxrpc_sendmsg() allocating, filling, encrypting and transmitting each packet before moving onto the next one. (2) Get rid of the fixed-size ring which sets a hard limit on the number of packets that can be retained in the ring. This allows the number of packets to increase without having to allocate a very large ring or having variable-sized rings. [Note: the downside of this is that it's then less efficient to locate a packet for retransmission as we then have to step through a list and examine each buffer in the list.] (3) Allow the filler/encrypter to run ahead of the transmission window. (4) Make it easier to do zero copy UDP from the packet buffers. (5) Make it easier to do zero copy from userspace to the packet buffers - and thence to UDP (only if for unauthenticated connections). To that end, the following changes are made: (1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets to be transmitted in. This allows them to be placed on multiple queues simultaneously. An sk_buff isn't really necessary as it's never passed on to lower-level networking code. (2) Keep the transmissable packets in a linked list on the call struct rather than in a ring. As a consequence, the annotation buffer isn't used either; rather a flag is set on the packet to indicate ackedness. (3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate that all packets up to and including the last got hard acked. (4) Wire headers are now stored in the txbuf rather than being concocted on the stack and they're stored immediately before the data, thereby allowing zerocopy of a single span. (5) Don't bother with instant-resend on transmission failure; rather, leave it for a timer or an ACK packet to trigger. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-04-01 06:55:08 +08:00
struct rxrpc_txbuf *tx_pending; /* Tx buffer being filled */
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 14:30:52 +08:00
wait_queue_head_t waitq; /* Wait queue for channel or Tx */
s64 tx_total_len; /* Total length left to be transmitted (or -1) */
unsigned long user_call_ID; /* user-defined call ID */
unsigned long flags;
unsigned long events;
rxrpc: Lock around calling a kernel service Rx notification Place a spinlock around the invocation of call->notify_rx() for a kernel service call and lock again when ending the call and replace the notification pointer with a pointer to a dummy function. This is required because it's possible for rxrpc_notify_socket() to be called after the call has been ended by the kernel service if called from the asynchronous work function rxrpc_process_call(). However, rxrpc_notify_socket() currently only holds the RCU read lock when invoking ->notify_rx(), which means that the afs_call struct would need to be disposed of by call_rcu() rather than by kfree(). But we shouldn't see any notifications from a call after calling rxrpc_kernel_end_call(), so a lock is required in rxrpc code. Without this, we may see the call wait queue as having a corrupt spinlock: BUG: spinlock bad magic on CPU#0, kworker/0:2/1612 general protection fault: 0000 [#1] SMP ... Workqueue: krxrpcd rxrpc_process_call task: ffff88040b83c400 task.stack: ffff88040adfc000 RIP: 0010:spin_bug+0x161/0x18f RSP: 0018:ffff88040adffcc0 EFLAGS: 00010002 RAX: 0000000000000032 RBX: 6b6b6b6b6b6b6b6b RCX: ffffffff81ab16cf RDX: ffff88041fa14c01 RSI: ffff88041fa0ccb8 RDI: ffff88041fa0ccb8 RBP: ffff88040adffcd8 R08: 00000000ffffffff R09: 00000000ffffffff R10: ffff88040adffc60 R11: 000000000000022c R12: ffff88040aca2208 R13: ffffffff81a58114 R14: 0000000000000000 R15: 0000000000000000 .... Call Trace: do_raw_spin_lock+0x1d/0x89 _raw_spin_lock_irqsave+0x3d/0x49 ? __wake_up_common_lock+0x4c/0xa7 __wake_up_common_lock+0x4c/0xa7 ? __lock_is_held+0x47/0x7a __wake_up+0xe/0x10 afs_wake_up_call_waiter+0x11b/0x122 [kafs] rxrpc_notify_socket+0x12b/0x258 rxrpc_process_call+0x18e/0x7d0 process_one_work+0x298/0x4de ? rescuer_thread+0x280/0x280 worker_thread+0x1d1/0x2ae ? rescuer_thread+0x280/0x280 kthread+0x12c/0x134 ? kthread_create_on_node+0x3a/0x3a ret_from_fork+0x27/0x40 In this case, note the corrupt data in EBX. The address of the offending afs_call is in R12, plus the offset to the spinlock. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 23:06:08 +08:00
spinlock_t notify_lock; /* Kernel notification lock */
unsigned int send_abort_why; /* Why the abort [enum rxrpc_abort_reason] */
s32 send_abort; /* Abort code to be sent */
short send_abort_err; /* Error to be associated with the abort */
rxrpc_seq_t send_abort_seq; /* DATA packet that incurred the abort (or 0) */
s32 abort_code; /* Local/remote abort code */
int error; /* Local error incurred */
enum rxrpc_call_state _state; /* Current state of call (needs barrier) */
enum rxrpc_call_completion completion; /* Call completion condition */
refcount_t ref;
u8 security_ix; /* Security type */
enum rxrpc_interruptibility interruptibility; /* At what point call may be interrupted */
u32 call_id; /* call ID on connection */
u32 cid; /* connection ID plus channel index */
u32 security_level; /* Security level selected */
int debug_id; /* debug ID for printks */
unsigned short rx_pkt_offset; /* Current recvmsg packet offset */
unsigned short rx_pkt_len; /* Current recvmsg packet len */
/* Transmitted data tracking. */
rxrpc: Don't use a ring buffer for call Tx queue Change the way the Tx queueing works to make the following ends easier to achieve: (1) The filling of packets, the encryption of packets and the transmission of packets can be handled in parallel by separate threads, rather than rxrpc_sendmsg() allocating, filling, encrypting and transmitting each packet before moving onto the next one. (2) Get rid of the fixed-size ring which sets a hard limit on the number of packets that can be retained in the ring. This allows the number of packets to increase without having to allocate a very large ring or having variable-sized rings. [Note: the downside of this is that it's then less efficient to locate a packet for retransmission as we then have to step through a list and examine each buffer in the list.] (3) Allow the filler/encrypter to run ahead of the transmission window. (4) Make it easier to do zero copy UDP from the packet buffers. (5) Make it easier to do zero copy from userspace to the packet buffers - and thence to UDP (only if for unauthenticated connections). To that end, the following changes are made: (1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets to be transmitted in. This allows them to be placed on multiple queues simultaneously. An sk_buff isn't really necessary as it's never passed on to lower-level networking code. (2) Keep the transmissable packets in a linked list on the call struct rather than in a ring. As a consequence, the annotation buffer isn't used either; rather a flag is set on the packet to indicate ackedness. (3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate that all packets up to and including the last got hard acked. (4) Wire headers are now stored in the txbuf rather than being concocted on the stack and they're stored immediately before the data, thereby allowing zerocopy of a single span. (5) Don't bother with instant-resend on transmission failure; rather, leave it for a timer or an ACK packet to trigger. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-04-01 06:55:08 +08:00
spinlock_t tx_lock; /* Transmit queue lock */
struct list_head tx_sendmsg; /* Sendmsg prepared packets */
rxrpc: Don't use a ring buffer for call Tx queue Change the way the Tx queueing works to make the following ends easier to achieve: (1) The filling of packets, the encryption of packets and the transmission of packets can be handled in parallel by separate threads, rather than rxrpc_sendmsg() allocating, filling, encrypting and transmitting each packet before moving onto the next one. (2) Get rid of the fixed-size ring which sets a hard limit on the number of packets that can be retained in the ring. This allows the number of packets to increase without having to allocate a very large ring or having variable-sized rings. [Note: the downside of this is that it's then less efficient to locate a packet for retransmission as we then have to step through a list and examine each buffer in the list.] (3) Allow the filler/encrypter to run ahead of the transmission window. (4) Make it easier to do zero copy UDP from the packet buffers. (5) Make it easier to do zero copy from userspace to the packet buffers - and thence to UDP (only if for unauthenticated connections). To that end, the following changes are made: (1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets to be transmitted in. This allows them to be placed on multiple queues simultaneously. An sk_buff isn't really necessary as it's never passed on to lower-level networking code. (2) Keep the transmissable packets in a linked list on the call struct rather than in a ring. As a consequence, the annotation buffer isn't used either; rather a flag is set on the packet to indicate ackedness. (3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate that all packets up to and including the last got hard acked. (4) Wire headers are now stored in the txbuf rather than being concocted on the stack and they're stored immediately before the data, thereby allowing zerocopy of a single span. (5) Don't bother with instant-resend on transmission failure; rather, leave it for a timer or an ACK packet to trigger. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-04-01 06:55:08 +08:00
struct list_head tx_buffer; /* Buffer of transmissible packets */
rxrpc_seq_t tx_bottom; /* First packet in buffer */
rxrpc_seq_t tx_transmitted; /* Highest packet transmitted */
rxrpc_seq_t tx_prepared; /* Highest Tx slot prepared. */
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
rxrpc_seq_t tx_top; /* Highest Tx slot allocated. */
u16 tx_backoff; /* Delay to insert due to Tx failure */
u8 tx_winsize; /* Maximum size of Tx window */
rxrpc: Don't use a ring buffer for call Tx queue Change the way the Tx queueing works to make the following ends easier to achieve: (1) The filling of packets, the encryption of packets and the transmission of packets can be handled in parallel by separate threads, rather than rxrpc_sendmsg() allocating, filling, encrypting and transmitting each packet before moving onto the next one. (2) Get rid of the fixed-size ring which sets a hard limit on the number of packets that can be retained in the ring. This allows the number of packets to increase without having to allocate a very large ring or having variable-sized rings. [Note: the downside of this is that it's then less efficient to locate a packet for retransmission as we then have to step through a list and examine each buffer in the list.] (3) Allow the filler/encrypter to run ahead of the transmission window. (4) Make it easier to do zero copy UDP from the packet buffers. (5) Make it easier to do zero copy from userspace to the packet buffers - and thence to UDP (only if for unauthenticated connections). To that end, the following changes are made: (1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets to be transmitted in. This allows them to be placed on multiple queues simultaneously. An sk_buff isn't really necessary as it's never passed on to lower-level networking code. (2) Keep the transmissable packets in a linked list on the call struct rather than in a ring. As a consequence, the annotation buffer isn't used either; rather a flag is set on the packet to indicate ackedness. (3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate that all packets up to and including the last got hard acked. (4) Wire headers are now stored in the txbuf rather than being concocted on the stack and they're stored immediately before the data, thereby allowing zerocopy of a single span. (5) Don't bother with instant-resend on transmission failure; rather, leave it for a timer or an ACK packet to trigger. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-04-01 06:55:08 +08:00
#define RXRPC_TX_MAX_WINDOW 128
ktime_t tx_last_sent; /* Last time a transmission occurred */
/* Received data tracking */
struct sk_buff_head recvmsg_queue; /* Queue of packets ready for recvmsg() */
struct sk_buff_head rx_oos_queue; /* Queue of out of sequence packets */
rxrpc_seq_t rx_highest_seq; /* Higest sequence number received */
rxrpc_seq_t rx_consumed; /* Highest packet consumed */
rxrpc_serial_t rx_serial; /* Highest serial received for this call */
u8 rx_winsize; /* Size of Rx window */
/* TCP-style slow-start congestion control [RFC5681]. Since the SMSS
* is fixed, we keep these numbers in terms of segments (ie. DATA
* packets) rather than bytes.
*/
#define RXRPC_TX_SMSS RXRPC_JUMBO_DATALEN
#define RXRPC_MIN_CWND (RXRPC_TX_SMSS > 2190 ? 2 : RXRPC_TX_SMSS > 1095 ? 3 : 4)
u8 cong_cwnd; /* Congestion window size */
u8 cong_extra; /* Extra to send for congestion management */
u8 cong_ssthresh; /* Slow-start threshold */
enum rxrpc_congest_mode cong_mode:8; /* Congestion management mode */
u8 cong_dup_acks; /* Count of ACKs showing missing packets */
u8 cong_cumul_acks; /* Cumulative ACK count */
ktime_t cong_tstamp; /* Last time cwnd was changed */
/* Receive-phase ACK management (ACKs we send). */
u8 ackr_reason; /* reason to ACK */
u16 ackr_sack_base; /* Starting slot in SACK table ring */
rxrpc_serial_t ackr_serial; /* serial of packet being ACK'd */
rxrpc_seq_t ackr_window; /* Base of SACK window */
rxrpc_seq_t ackr_wtop; /* Base of SACK window */
unsigned int ackr_nr_unacked; /* Number of unacked packets */
atomic_t ackr_nr_consumed; /* Number of packets needing hard ACK */
struct {
#define RXRPC_SACK_SIZE 256
/* SACK table for soft-acked packets */
u8 ackr_sack_table[RXRPC_SACK_SIZE];
} __aligned(8);
rxrpc: Fix loss of RTT samples due to interposed ACK The Rx protocol has a mechanism to help generate RTT samples that works by a client transmitting a REQUESTED-type ACK when it receives a DATA packet that has the REQUEST_ACK flag set. The peer, however, may interpose other ACKs before transmitting the REQUESTED-ACK, as can be seen in the following trace excerpt: rxrpc_tx_data: c=00000044 DATA d0b5ece8:00000001 00000001 q=00000001 fl=07 rxrpc_rx_ack: c=00000044 00000001 PNG r=00000000 f=00000002 p=00000000 n=0 rxrpc_rx_ack: c=00000044 00000002 REQ r=00000001 f=00000002 p=00000001 n=0 ... DATA packet 1 (q=xx) has REQUEST_ACK set (bit 1 of fl=xx). The incoming ping (labelled PNG) hard-acks the request DATA packet (f=xx exceeds the sequence number of the DATA packet), causing it to be discarded from the Tx ring. The ACK that was requested (labelled REQ, r=xx references the serial of the DATA packet) comes after the ping, but the sk_buff holding the timestamp has gone and the RTT sample is lost. This is particularly noticeable on RPC calls used to probe the service offered by the peer. A lot of peers end up with an unknown RTT because we only ever sent a single RPC. This confuses the server rotation algorithm. Fix this by caching the information about the outgoing packet in RTT calculations in the rxrpc_call struct rather than looking in the Tx ring. A four-deep buffer is maintained and both REQUEST_ACK-flagged DATA and PING-ACK transmissions are recorded in there. When the appropriate response ACK is received, the buffer is checked for a match and, if found, an RTT sample is recorded. If a received ACK refers to a packet with a later serial number than an entry in the cache, that entry is presumed lost and the entry is made available to record a new transmission. ACKs types other than REQUESTED-type and PING-type cause any matching sample to be cancelled as they don't necessarily represent a useful measurement. If there's no space in the buffer on ping/data transmission, the sample base is discarded. Fixes: 50235c4b5a2f ("rxrpc: Obtain RTT data by requesting ACKs on DATA packets") Signed-off-by: David Howells <dhowells@redhat.com>
2020-08-20 06:29:16 +08:00
/* RTT management */
rxrpc_serial_t rtt_serial[4]; /* Serial number of DATA or PING sent */
ktime_t rtt_sent_at[4]; /* Time packet sent */
unsigned long rtt_avail; /* Mask of available slots in bits 0-3,
* Mask of pending samples in 8-11 */
#define RXRPC_CALL_RTT_AVAIL_MASK 0xf
#define RXRPC_CALL_RTT_PEND_SHIFT 8
/* Transmission-phase ACK management (ACKs we've received). */
ktime_t acks_latest_ts; /* Timestamp of latest ACK received */
rxrpc_seq_t acks_first_seq; /* first sequence number received */
rxrpc_seq_t acks_prev_seq; /* Highest previousPacket received */
rxrpc: Don't use a ring buffer for call Tx queue Change the way the Tx queueing works to make the following ends easier to achieve: (1) The filling of packets, the encryption of packets and the transmission of packets can be handled in parallel by separate threads, rather than rxrpc_sendmsg() allocating, filling, encrypting and transmitting each packet before moving onto the next one. (2) Get rid of the fixed-size ring which sets a hard limit on the number of packets that can be retained in the ring. This allows the number of packets to increase without having to allocate a very large ring or having variable-sized rings. [Note: the downside of this is that it's then less efficient to locate a packet for retransmission as we then have to step through a list and examine each buffer in the list.] (3) Allow the filler/encrypter to run ahead of the transmission window. (4) Make it easier to do zero copy UDP from the packet buffers. (5) Make it easier to do zero copy from userspace to the packet buffers - and thence to UDP (only if for unauthenticated connections). To that end, the following changes are made: (1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets to be transmitted in. This allows them to be placed on multiple queues simultaneously. An sk_buff isn't really necessary as it's never passed on to lower-level networking code. (2) Keep the transmissable packets in a linked list on the call struct rather than in a ring. As a consequence, the annotation buffer isn't used either; rather a flag is set on the packet to indicate ackedness. (3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate that all packets up to and including the last got hard acked. (4) Wire headers are now stored in the txbuf rather than being concocted on the stack and they're stored immediately before the data, thereby allowing zerocopy of a single span. (5) Don't bother with instant-resend on transmission failure; rather, leave it for a timer or an ACK packet to trigger. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-04-01 06:55:08 +08:00
rxrpc_seq_t acks_hard_ack; /* Latest hard-ack point */
rxrpc_seq_t acks_lowest_nak; /* Lowest NACK in the buffer (or ==tx_hard_ack) */
rxrpc_serial_t acks_highest_serial; /* Highest serial number ACK'd */
};
/*
* Summary of a new ACK and the changes it made to the Tx buffer packet states.
*/
struct rxrpc_ack_summary {
u16 nr_acks; /* Number of ACKs in packet */
u16 nr_new_acks; /* Number of new ACKs in packet */
u16 nr_rot_new_acks; /* Number of rotated new ACKs */
u8 ack_reason;
bool saw_nacks; /* Saw NACKs in packet */
bool new_low_nack; /* T if new low NACK found */
bool retrans_timeo; /* T if reTx due to timeout happened */
u8 flight_size; /* Number of unreceived transmissions */
/* Place to stash values for tracing */
enum rxrpc_congest_mode mode:8;
u8 cwnd;
u8 ssthresh;
u8 dup_acks;
u8 cumulative_acks;
};
/*
* sendmsg() cmsg-specified parameters.
*/
enum rxrpc_command {
RXRPC_CMD_SEND_DATA, /* send data message */
RXRPC_CMD_SEND_ABORT, /* request abort generation */
RXRPC_CMD_REJECT_BUSY, /* [server] reject a call as busy */
RXRPC_CMD_CHARGE_ACCEPT, /* [server] charge accept preallocation */
};
struct rxrpc_call_params {
s64 tx_total_len; /* Total Tx data length (if send data) */
unsigned long user_call_ID; /* User's call ID */
struct {
u32 hard; /* Maximum lifetime (sec) */
u32 idle; /* Max time since last data packet (msec) */
u32 normal; /* Max time since last call packet (msec) */
} timeouts;
u8 nr_timeouts; /* Number of timeouts specified */
bool kernel; /* T if kernel is making the call */
enum rxrpc_interruptibility interruptibility; /* How is interruptible is the call? */
};
struct rxrpc_send_params {
struct rxrpc_call_params call;
u32 abort_code; /* Abort code to Tx (if abort) */
enum rxrpc_command command : 8; /* The command to implement */
bool exclusive; /* Shared or exclusive call */
bool upgrade; /* If the connection is upgradeable */
};
/*
* Buffer of data to be output as a packet.
*/
struct rxrpc_txbuf {
struct rcu_head rcu;
struct list_head call_link; /* Link in call->tx_sendmsg/tx_buffer */
struct list_head tx_link; /* Link in live Enc queue or Tx queue */
ktime_t last_sent; /* Time at which last transmitted */
refcount_t ref;
rxrpc_seq_t seq; /* Sequence number of this packet */
unsigned int call_debug_id;
unsigned int debug_id;
unsigned int len; /* Amount of data in buffer */
unsigned int space; /* Remaining data space */
unsigned int offset; /* Offset of fill point */
unsigned long flags;
#define RXRPC_TXBUF_LAST 0 /* Set if last packet in Tx phase */
#define RXRPC_TXBUF_RESENT 1 /* Set if has been resent */
u8 /*enum rxrpc_propose_ack_trace*/ ack_why; /* If ack, why */
struct {
/* The packet for encrypting and DMA'ing. We align it such
* that data[] aligns correctly for any crypto blocksize.
*/
u8 pad[64 - sizeof(struct rxrpc_wire_header)];
struct rxrpc_wire_header wire; /* Network-ready header */
union {
u8 data[RXRPC_JUMBO_DATALEN]; /* Data packet */
struct {
struct rxrpc_ackpacket ack;
rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper 0-length arrays are deprecated, and cause problems with bounds checking. Replace with a flexible array: In file included from include/linux/string.h:253, from include/linux/bitmap.h:11, from include/linux/cpumask.h:12, from arch/x86/include/asm/paravirt.h:17, from arch/x86/include/asm/cpuid.h:62, from arch/x86/include/asm/processor.h:19, from arch/x86/include/asm/cpufeature.h:5, from arch/x86/include/asm/thread_info.h:53, from include/linux/thread_info.h:60, from arch/x86/include/asm/preempt.h:9, from include/linux/preempt.h:78, from include/linux/percpu.h:6, from include/linux/prandom.h:13, from include/linux/random.h:153, from include/linux/net.h:18, from net/rxrpc/output.c:10: In function 'fortify_memcpy_chk', inlined from 'rxrpc_fill_out_ack' at net/rxrpc/output.c:158:2: include/linux/fortify-string.h:520:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 520 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/linux-next/20230105132535.0d65378f@canb.auug.org.au/ Cc: David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-afs@lists.infradead.org Cc: netdev@vger.kernel.org Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kees Cook <keescook@chromium.org>
2023-01-06 04:05:50 +08:00
DECLARE_FLEX_ARRAY(u8, acks);
};
};
} __aligned(64);
};
static inline bool rxrpc_sending_to_server(const struct rxrpc_txbuf *txb)
{
return txb->wire.flags & RXRPC_CLIENT_INITIATED;
}
static inline bool rxrpc_sending_to_client(const struct rxrpc_txbuf *txb)
{
return !rxrpc_sending_to_server(txb);
}
#include <trace/events/rxrpc.h>
/*
[AF_RXRPC]: Add an interface to the AF_RXRPC module for the AFS filesystem to use Add an interface to the AF_RXRPC module so that the AFS filesystem module can more easily make use of the services available. AFS still opens a socket but then uses the action functions in lieu of sendmsg() and registers an intercept functions to grab messages before they're queued on the socket Rx queue. This permits AFS (or whatever) to: (1) Avoid the overhead of using the recvmsg() call. (2) Use different keys directly on individual client calls on one socket rather than having to open a whole slew of sockets, one for each key it might want to use. (3) Avoid calling request_key() at the point of issue of a call or opening of a socket. This is done instead by AFS at the point of open(), unlink() or other VFS operation and the key handed through. (4) Request the use of something other than GFP_KERNEL to allocate memory. Furthermore: (*) The socket buffer markings used by RxRPC are made available for AFS so that it can interpret the cooked RxRPC messages itself. (*) rxgen (un)marshalling abort codes are made available. The following documentation for the kernel interface is added to Documentation/networking/rxrpc.txt: ========================= AF_RXRPC KERNEL INTERFACE ========================= The AF_RXRPC module also provides an interface for use by in-kernel utilities such as the AFS filesystem. This permits such a utility to: (1) Use different keys directly on individual client calls on one socket rather than having to open a whole slew of sockets, one for each key it might want to use. (2) Avoid having RxRPC call request_key() at the point of issue of a call or opening of a socket. Instead the utility is responsible for requesting a key at the appropriate point. AFS, for instance, would do this during VFS operations such as open() or unlink(). The key is then handed through when the call is initiated. (3) Request the use of something other than GFP_KERNEL to allocate memory. (4) Avoid the overhead of using the recvmsg() call. RxRPC messages can be intercepted before they get put into the socket Rx queue and the socket buffers manipulated directly. To use the RxRPC facility, a kernel utility must still open an AF_RXRPC socket, bind an addess as appropriate and listen if it's to be a server socket, but then it passes this to the kernel interface functions. The kernel interface functions are as follows: (*) Begin a new client call. struct rxrpc_call * rxrpc_kernel_begin_call(struct socket *sock, struct sockaddr_rxrpc *srx, struct key *key, unsigned long user_call_ID, gfp_t gfp); This allocates the infrastructure to make a new RxRPC call and assigns call and connection numbers. The call will be made on the UDP port that the socket is bound to. The call will go to the destination address of a connected client socket unless an alternative is supplied (srx is non-NULL). If a key is supplied then this will be used to secure the call instead of the key bound to the socket with the RXRPC_SECURITY_KEY sockopt. Calls secured in this way will still share connections if at all possible. The user_call_ID is equivalent to that supplied to sendmsg() in the control data buffer. It is entirely feasible to use this to point to a kernel data structure. If this function is successful, an opaque reference to the RxRPC call is returned. The caller now holds a reference on this and it must be properly ended. (*) End a client call. void rxrpc_kernel_end_call(struct rxrpc_call *call); This is used to end a previously begun call. The user_call_ID is expunged from AF_RXRPC's knowledge and will not be seen again in association with the specified call. (*) Send data through a call. int rxrpc_kernel_send_data(struct rxrpc_call *call, struct msghdr *msg, size_t len); This is used to supply either the request part of a client call or the reply part of a server call. msg.msg_iovlen and msg.msg_iov specify the data buffers to be used. msg_iov may not be NULL and must point exclusively to in-kernel virtual addresses. msg.msg_flags may be given MSG_MORE if there will be subsequent data sends for this call. The msg must not specify a destination address, control data or any flags other than MSG_MORE. len is the total amount of data to transmit. (*) Abort a call. void rxrpc_kernel_abort_call(struct rxrpc_call *call, u32 abort_code); This is used to abort a call if it's still in an abortable state. The abort code specified will be placed in the ABORT message sent. (*) Intercept received RxRPC messages. typedef void (*rxrpc_interceptor_t)(struct sock *sk, unsigned long user_call_ID, struct sk_buff *skb); void rxrpc_kernel_intercept_rx_messages(struct socket *sock, rxrpc_interceptor_t interceptor); This installs an interceptor function on the specified AF_RXRPC socket. All messages that would otherwise wind up in the socket's Rx queue are then diverted to this function. Note that care must be taken to process the messages in the right order to maintain DATA message sequentiality. The interceptor function itself is provided with the address of the socket and handling the incoming message, the ID assigned by the kernel utility to the call and the socket buffer containing the message. The skb->mark field indicates the type of message: MARK MEANING =============================== ======================================= RXRPC_SKB_MARK_DATA Data message RXRPC_SKB_MARK_FINAL_ACK Final ACK received for an incoming call RXRPC_SKB_MARK_BUSY Client call rejected as server busy RXRPC_SKB_MARK_REMOTE_ABORT Call aborted by peer RXRPC_SKB_MARK_NET_ERROR Network error detected RXRPC_SKB_MARK_LOCAL_ERROR Local error encountered RXRPC_SKB_MARK_NEW_CALL New incoming call awaiting acceptance The remote abort message can be probed with rxrpc_kernel_get_abort_code(). The two error messages can be probed with rxrpc_kernel_get_error_number(). A new call can be accepted with rxrpc_kernel_accept_call(). Data messages can have their contents extracted with the usual bunch of socket buffer manipulation functions. A data message can be determined to be the last one in a sequence with rxrpc_kernel_is_data_last(). When a data message has been used up, rxrpc_kernel_data_delivered() should be called on it.. Non-data messages should be handled to rxrpc_kernel_free_skb() to dispose of. It is possible to get extra refs on all types of message for later freeing, but this may pin the state of a call until the message is finally freed. (*) Accept an incoming call. struct rxrpc_call * rxrpc_kernel_accept_call(struct socket *sock, unsigned long user_call_ID); This is used to accept an incoming call and to assign it a call ID. This function is similar to rxrpc_kernel_begin_call() and calls accepted must be ended in the same way. If this function is successful, an opaque reference to the RxRPC call is returned. The caller now holds a reference on this and it must be properly ended. (*) Reject an incoming call. int rxrpc_kernel_reject_call(struct socket *sock); This is used to reject the first incoming call on the socket's queue with a BUSY message. -ENODATA is returned if there were no incoming calls. Other errors may be returned if the call had been aborted (-ECONNABORTED) or had timed out (-ETIME). (*) Record the delivery of a data message and free it. void rxrpc_kernel_data_delivered(struct sk_buff *skb); This is used to record a data message as having been delivered and to update the ACK state for the call. The socket buffer will be freed. (*) Free a message. void rxrpc_kernel_free_skb(struct sk_buff *skb); This is used to free a non-DATA socket buffer intercepted from an AF_RXRPC socket. (*) Determine if a data message is the last one on a call. bool rxrpc_kernel_is_data_last(struct sk_buff *skb); This is used to determine if a socket buffer holds the last data message to be received for a call (true will be returned if it does, false if not). The data message will be part of the reply on a client call and the request on an incoming call. In the latter case there will be more messages, but in the former case there will not. (*) Get the abort code from an abort message. u32 rxrpc_kernel_get_abort_code(struct sk_buff *skb); This is used to extract the abort code from a remote abort message. (*) Get the error number from a local or network error message. int rxrpc_kernel_get_error_number(struct sk_buff *skb); This is used to extract the error number from a message indicating either a local error occurred or a network error occurred. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:50:17 +08:00
* af_rxrpc.c
*/
rxrpc: Don't use a ring buffer for call Tx queue Change the way the Tx queueing works to make the following ends easier to achieve: (1) The filling of packets, the encryption of packets and the transmission of packets can be handled in parallel by separate threads, rather than rxrpc_sendmsg() allocating, filling, encrypting and transmitting each packet before moving onto the next one. (2) Get rid of the fixed-size ring which sets a hard limit on the number of packets that can be retained in the ring. This allows the number of packets to increase without having to allocate a very large ring or having variable-sized rings. [Note: the downside of this is that it's then less efficient to locate a packet for retransmission as we then have to step through a list and examine each buffer in the list.] (3) Allow the filler/encrypter to run ahead of the transmission window. (4) Make it easier to do zero copy UDP from the packet buffers. (5) Make it easier to do zero copy from userspace to the packet buffers - and thence to UDP (only if for unauthenticated connections). To that end, the following changes are made: (1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets to be transmitted in. This allows them to be placed on multiple queues simultaneously. An sk_buff isn't really necessary as it's never passed on to lower-level networking code. (2) Keep the transmissable packets in a linked list on the call struct rather than in a ring. As a consequence, the annotation buffer isn't used either; rather a flag is set on the packet to indicate ackedness. (3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate that all packets up to and including the last got hard acked. (4) Wire headers are now stored in the txbuf rather than being concocted on the stack and they're stored immediately before the data, thereby allowing zerocopy of a single span. (5) Don't bother with instant-resend on transmission failure; rather, leave it for a timer or an ACK packet to trigger. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-04-01 06:55:08 +08:00
extern atomic_t rxrpc_n_rx_skbs;
[AF_RXRPC]: Add an interface to the AF_RXRPC module for the AFS filesystem to use Add an interface to the AF_RXRPC module so that the AFS filesystem module can more easily make use of the services available. AFS still opens a socket but then uses the action functions in lieu of sendmsg() and registers an intercept functions to grab messages before they're queued on the socket Rx queue. This permits AFS (or whatever) to: (1) Avoid the overhead of using the recvmsg() call. (2) Use different keys directly on individual client calls on one socket rather than having to open a whole slew of sockets, one for each key it might want to use. (3) Avoid calling request_key() at the point of issue of a call or opening of a socket. This is done instead by AFS at the point of open(), unlink() or other VFS operation and the key handed through. (4) Request the use of something other than GFP_KERNEL to allocate memory. Furthermore: (*) The socket buffer markings used by RxRPC are made available for AFS so that it can interpret the cooked RxRPC messages itself. (*) rxgen (un)marshalling abort codes are made available. The following documentation for the kernel interface is added to Documentation/networking/rxrpc.txt: ========================= AF_RXRPC KERNEL INTERFACE ========================= The AF_RXRPC module also provides an interface for use by in-kernel utilities such as the AFS filesystem. This permits such a utility to: (1) Use different keys directly on individual client calls on one socket rather than having to open a whole slew of sockets, one for each key it might want to use. (2) Avoid having RxRPC call request_key() at the point of issue of a call or opening of a socket. Instead the utility is responsible for requesting a key at the appropriate point. AFS, for instance, would do this during VFS operations such as open() or unlink(). The key is then handed through when the call is initiated. (3) Request the use of something other than GFP_KERNEL to allocate memory. (4) Avoid the overhead of using the recvmsg() call. RxRPC messages can be intercepted before they get put into the socket Rx queue and the socket buffers manipulated directly. To use the RxRPC facility, a kernel utility must still open an AF_RXRPC socket, bind an addess as appropriate and listen if it's to be a server socket, but then it passes this to the kernel interface functions. The kernel interface functions are as follows: (*) Begin a new client call. struct rxrpc_call * rxrpc_kernel_begin_call(struct socket *sock, struct sockaddr_rxrpc *srx, struct key *key, unsigned long user_call_ID, gfp_t gfp); This allocates the infrastructure to make a new RxRPC call and assigns call and connection numbers. The call will be made on the UDP port that the socket is bound to. The call will go to the destination address of a connected client socket unless an alternative is supplied (srx is non-NULL). If a key is supplied then this will be used to secure the call instead of the key bound to the socket with the RXRPC_SECURITY_KEY sockopt. Calls secured in this way will still share connections if at all possible. The user_call_ID is equivalent to that supplied to sendmsg() in the control data buffer. It is entirely feasible to use this to point to a kernel data structure. If this function is successful, an opaque reference to the RxRPC call is returned. The caller now holds a reference on this and it must be properly ended. (*) End a client call. void rxrpc_kernel_end_call(struct rxrpc_call *call); This is used to end a previously begun call. The user_call_ID is expunged from AF_RXRPC's knowledge and will not be seen again in association with the specified call. (*) Send data through a call. int rxrpc_kernel_send_data(struct rxrpc_call *call, struct msghdr *msg, size_t len); This is used to supply either the request part of a client call or the reply part of a server call. msg.msg_iovlen and msg.msg_iov specify the data buffers to be used. msg_iov may not be NULL and must point exclusively to in-kernel virtual addresses. msg.msg_flags may be given MSG_MORE if there will be subsequent data sends for this call. The msg must not specify a destination address, control data or any flags other than MSG_MORE. len is the total amount of data to transmit. (*) Abort a call. void rxrpc_kernel_abort_call(struct rxrpc_call *call, u32 abort_code); This is used to abort a call if it's still in an abortable state. The abort code specified will be placed in the ABORT message sent. (*) Intercept received RxRPC messages. typedef void (*rxrpc_interceptor_t)(struct sock *sk, unsigned long user_call_ID, struct sk_buff *skb); void rxrpc_kernel_intercept_rx_messages(struct socket *sock, rxrpc_interceptor_t interceptor); This installs an interceptor function on the specified AF_RXRPC socket. All messages that would otherwise wind up in the socket's Rx queue are then diverted to this function. Note that care must be taken to process the messages in the right order to maintain DATA message sequentiality. The interceptor function itself is provided with the address of the socket and handling the incoming message, the ID assigned by the kernel utility to the call and the socket buffer containing the message. The skb->mark field indicates the type of message: MARK MEANING =============================== ======================================= RXRPC_SKB_MARK_DATA Data message RXRPC_SKB_MARK_FINAL_ACK Final ACK received for an incoming call RXRPC_SKB_MARK_BUSY Client call rejected as server busy RXRPC_SKB_MARK_REMOTE_ABORT Call aborted by peer RXRPC_SKB_MARK_NET_ERROR Network error detected RXRPC_SKB_MARK_LOCAL_ERROR Local error encountered RXRPC_SKB_MARK_NEW_CALL New incoming call awaiting acceptance The remote abort message can be probed with rxrpc_kernel_get_abort_code(). The two error messages can be probed with rxrpc_kernel_get_error_number(). A new call can be accepted with rxrpc_kernel_accept_call(). Data messages can have their contents extracted with the usual bunch of socket buffer manipulation functions. A data message can be determined to be the last one in a sequence with rxrpc_kernel_is_data_last(). When a data message has been used up, rxrpc_kernel_data_delivered() should be called on it.. Non-data messages should be handled to rxrpc_kernel_free_skb() to dispose of. It is possible to get extra refs on all types of message for later freeing, but this may pin the state of a call until the message is finally freed. (*) Accept an incoming call. struct rxrpc_call * rxrpc_kernel_accept_call(struct socket *sock, unsigned long user_call_ID); This is used to accept an incoming call and to assign it a call ID. This function is similar to rxrpc_kernel_begin_call() and calls accepted must be ended in the same way. If this function is successful, an opaque reference to the RxRPC call is returned. The caller now holds a reference on this and it must be properly ended. (*) Reject an incoming call. int rxrpc_kernel_reject_call(struct socket *sock); This is used to reject the first incoming call on the socket's queue with a BUSY message. -ENODATA is returned if there were no incoming calls. Other errors may be returned if the call had been aborted (-ECONNABORTED) or had timed out (-ETIME). (*) Record the delivery of a data message and free it. void rxrpc_kernel_data_delivered(struct sk_buff *skb); This is used to record a data message as having been delivered and to update the ACK state for the call. The socket buffer will be freed. (*) Free a message. void rxrpc_kernel_free_skb(struct sk_buff *skb); This is used to free a non-DATA socket buffer intercepted from an AF_RXRPC socket. (*) Determine if a data message is the last one on a call. bool rxrpc_kernel_is_data_last(struct sk_buff *skb); This is used to determine if a socket buffer holds the last data message to be received for a call (true will be returned if it does, false if not). The data message will be part of the reply on a client call and the request on an incoming call. In the latter case there will be more messages, but in the former case there will not. (*) Get the abort code from an abort message. u32 rxrpc_kernel_get_abort_code(struct sk_buff *skb); This is used to extract the abort code from a remote abort message. (*) Get the error number from a local or network error message. int rxrpc_kernel_get_error_number(struct sk_buff *skb); This is used to extract the error number from a message indicating either a local error occurred or a network error occurred. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:50:17 +08:00
extern struct workqueue_struct *rxrpc_workqueue;
/*
* call_accept.c
*/
rxrpc: Preallocate peers, conns and calls for incoming service requests Make it possible for the data_ready handler called from the UDP transport socket to completely instantiate an rxrpc_call structure and make it immediately live by preallocating all the memory it might need. The idea is to cut out the background thread usage as much as possible. [Note that the preallocated structs are not actually used in this patch - that will be done in a future patch.] If insufficient resources are available in the preallocation buffers, it will be possible to discard the DATA packet in the data_ready handler or schedule a BUSY packet without the need to schedule an attempt at allocation in a background thread. To this end: (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a maximum number each of the listen backlog size. The backlog size is limited to a maxmimum of 32. Only this many of each can be in the preallocation buffer. (2) For userspace sockets, the preallocation is charged initially by listen() and will be recharged by accepting or rejecting pending new incoming calls. (3) For kernel services {,re,dis}charging of the preallocation buffers is handled manually. Two notifier callbacks have to be provided before kernel_listen() is invoked: (a) An indication that a new call has been instantiated. This can be used to trigger background recharging. (b) An indication that a call is being discarded. This is used when the socket is being released. A function, rxrpc_kernel_charge_accept() is called by the kernel service to preallocate a single call. It should be passed the user ID to be used for that call and a callback to associate the rxrpc call with the kernel service's side of the ID. (4) Discard the preallocation when the socket is closed. (5) Temporarily bump the refcount on the call allocated in rxrpc_incoming_call() so that rxrpc_release_call() can ditch the preallocation ref on service calls unconditionally. This will no longer be necessary once the preallocation is used. Note that this does not yet control the number of active service calls on a client - that will come in a later patch. A future development would be to provide a setsockopt() call that allows a userspace server to manually charge the preallocation buffer. This would allow user call IDs to be provided in advance and the awkward manual accept stage to be bypassed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
int rxrpc_service_prealloc(struct rxrpc_sock *, gfp_t);
void rxrpc_discard_prealloc(struct rxrpc_sock *);
bool rxrpc_new_incoming_call(struct rxrpc_local *local,
struct rxrpc_peer *peer,
struct rxrpc_connection *conn,
struct sockaddr_rxrpc *peer_srx,
struct sk_buff *skb);
rxrpc: Rework local endpoint management Rework the local RxRPC endpoint management. Local endpoint objects are maintained in a flat list as before. This should be okay as there shouldn't be more than one per open AF_RXRPC socket (there can be fewer as local endpoints can be shared if their local service ID is 0 and they share the same local transport parameters). Changes: (1) Local endpoints may now only be shared if they have local service ID 0 (ie. they're not being used for listening). This prevents a scenario where process A is listening of the Cache Manager port and process B contacts a fileserver - which may then attempt to send CM requests back to B. But if A and B are sharing a local endpoint, A will get the CM requests meant for B. (2) We use a mutex to handle lookups and don't provide RCU-only lookups since we only expect to access the list when opening a socket or destroying an endpoint. The local endpoint object is pointed to by the transport socket's sk_user_data for the life of the transport socket - allowing us to refer to it directly from the sk_data_ready and sk_error_report callbacks. (3) atomic_inc_not_zero() now exists and can be used to only share a local endpoint if the last reference hasn't yet gone. (4) We can remove rxrpc_local_lock - a spinlock that had to be taken with BH processing disabled given that we assume sk_user_data won't change under us. (5) The transport socket is shut down before we clear the sk_user_data pointer so that we can be sure that the transport socket's callbacks won't be invoked once the RCU destruction is scheduled. (6) Local endpoints have a work item that handles both destruction and event processing. The means that destruction doesn't then need to wait for event processing. The event queues can then be cleared after the transport socket is shut down. (7) Local endpoints are no longer available for resurrection beyond the life of the sockets that had them open. As soon as their last ref goes, they are scheduled for destruction and may not have their usage count moved from 0. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:35 +08:00
void rxrpc_accept_incoming_calls(struct rxrpc_local *);
int rxrpc_user_charge_accept(struct rxrpc_sock *, unsigned long);
/*
* call_event.c
*/
void rxrpc_propose_ping(struct rxrpc_call *call, u32 serial,
enum rxrpc_propose_ack_trace why);
void rxrpc_send_ACK(struct rxrpc_call *, u8, rxrpc_serial_t, enum rxrpc_propose_ack_trace);
void rxrpc_propose_delay_ACK(struct rxrpc_call *, rxrpc_serial_t,
enum rxrpc_propose_ack_trace);
rxrpc: Don't use a ring buffer for call Tx queue Change the way the Tx queueing works to make the following ends easier to achieve: (1) The filling of packets, the encryption of packets and the transmission of packets can be handled in parallel by separate threads, rather than rxrpc_sendmsg() allocating, filling, encrypting and transmitting each packet before moving onto the next one. (2) Get rid of the fixed-size ring which sets a hard limit on the number of packets that can be retained in the ring. This allows the number of packets to increase without having to allocate a very large ring or having variable-sized rings. [Note: the downside of this is that it's then less efficient to locate a packet for retransmission as we then have to step through a list and examine each buffer in the list.] (3) Allow the filler/encrypter to run ahead of the transmission window. (4) Make it easier to do zero copy UDP from the packet buffers. (5) Make it easier to do zero copy from userspace to the packet buffers - and thence to UDP (only if for unauthenticated connections). To that end, the following changes are made: (1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets to be transmitted in. This allows them to be placed on multiple queues simultaneously. An sk_buff isn't really necessary as it's never passed on to lower-level networking code. (2) Keep the transmissable packets in a linked list on the call struct rather than in a ring. As a consequence, the annotation buffer isn't used either; rather a flag is set on the packet to indicate ackedness. (3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate that all packets up to and including the last got hard acked. (4) Wire headers are now stored in the txbuf rather than being concocted on the stack and they're stored immediately before the data, thereby allowing zerocopy of a single span. (5) Don't bother with instant-resend on transmission failure; rather, leave it for a timer or an ACK packet to trigger. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-04-01 06:55:08 +08:00
void rxrpc_shrink_call_tx_buffer(struct rxrpc_call *);
void rxrpc_resend(struct rxrpc_call *call, struct sk_buff *ack_skb);
2022-03-30 22:39:16 +08:00
void rxrpc_reduce_call_timer(struct rxrpc_call *call,
unsigned long expire_at,
unsigned long now,
enum rxrpc_timer_trace why);
bool rxrpc_input_call_event(struct rxrpc_call *call, struct sk_buff *skb);
/*
* call_object.c
*/
extern const char *const rxrpc_call_states[];
extern const char *const rxrpc_call_completions[];
extern struct kmem_cache *rxrpc_call_jar;
void rxrpc_poke_call(struct rxrpc_call *call, enum rxrpc_call_poke_trace what);
struct rxrpc_call *rxrpc_find_call_by_user_ID(struct rxrpc_sock *, unsigned long);
struct rxrpc_call *rxrpc_alloc_call(struct rxrpc_sock *, gfp_t, unsigned int);
struct rxrpc_call *rxrpc_new_client_call(struct rxrpc_sock *,
struct rxrpc_conn_parameters *,
struct sockaddr_rxrpc *,
struct rxrpc_call_params *, gfp_t,
unsigned int);
void rxrpc_start_call_timer(struct rxrpc_call *call);
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
void rxrpc_incoming_call(struct rxrpc_sock *, struct rxrpc_call *,
struct sk_buff *);
rxrpc: Calls shouldn't hold socket refs rxrpc calls shouldn't hold refs on the sock struct. This was done so that the socket wouldn't go away whilst the call was in progress, such that the call could reach the socket's queues. However, we can mark the socket as requiring an RCU release and rely on the RCU read lock. To make this work, we do: (1) rxrpc_release_call() removes the call's call user ID. This is now only called from socket operations and not from the call processor: rxrpc_accept_call() / rxrpc_kernel_accept_call() rxrpc_reject_call() / rxrpc_kernel_reject_call() rxrpc_kernel_end_call() rxrpc_release_calls_on_socket() rxrpc_recvmsg() Though it is also called in the cleanup path of rxrpc_accept_incoming_call() before we assign a user ID. (2) Pass the socket pointer into rxrpc_release_call() rather than getting it from the call so that we can get rid of uninitialised calls. (3) Fix call processor queueing to pass a ref to the work queue and to release that ref at the end of the processor function (or to pass it back to the work queue if we have to requeue). (4) Skip out of the call processor function asap if the call is complete and don't requeue it if the call is complete. (5) Clean up the call immediately that the refcount reaches 0 rather than trying to defer it. Actual deallocation is deferred to RCU, however. (6) Don't hold socket refs for allocated calls. (7) Use the RCU read lock when queueing a message on a socket and treat the call's socket pointer according to RCU rules and check it for NULL. We also need to use the RCU read lock when viewing a call through procfs. (8) Transmit the final ACK/ABORT to a client call in rxrpc_release_call() if this hasn't been done yet so that we can then disconnect the call. Once the call is disconnected, it won't have any access to the connection struct and the UDP socket for the call work processor to be able to send the ACK. Terminal retransmission will be handled by the connection processor. (9) Release all calls immediately on the closing of a socket rather than trying to defer this. Incomplete calls will be aborted. The call refcount model is much simplified. Refs are held on the call by: (1) A socket's user ID tree. (2) A socket's incoming call secureq and acceptq. (3) A kernel service that has a call in progress. (4) A queued call work processor. We have to take care to put any call that we failed to queue. (5) sk_buffs on a socket's receive queue. A future patch will get rid of this. Whilst we're at it, we can do: (1) Get rid of the RXRPC_CALL_EV_RELEASE event. Release is now done entirely from the socket routines and never from the call's processor. (2) Get rid of the RXRPC_CALL_DEAD state. Calls now end in the RXRPC_CALL_COMPLETE state. (3) Get rid of the rxrpc_call::destroyer work item. Calls are now torn down when their refcount reaches 0 and then handed over to RCU for final cleanup. (4) Get rid of the rxrpc_call::deadspan timer. Calls are cleaned up immediately they're finished with and don't hang around. Post-completion retransmission is handled by the connection processor once the call is disconnected. (5) Get rid of the dead call expiry setting as there's no longer a timer to set. (6) rxrpc_destroy_all_calls() can just check that the call list is empty. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-07 16:19:31 +08:00
void rxrpc_release_call(struct rxrpc_sock *, struct rxrpc_call *);
void rxrpc_release_calls_on_socket(struct rxrpc_sock *);
void rxrpc_see_call(struct rxrpc_call *, enum rxrpc_call_trace);
struct rxrpc_call *rxrpc_try_get_call(struct rxrpc_call *, enum rxrpc_call_trace);
void rxrpc_get_call(struct rxrpc_call *, enum rxrpc_call_trace);
void rxrpc_put_call(struct rxrpc_call *, enum rxrpc_call_trace);
rxrpc: Preallocate peers, conns and calls for incoming service requests Make it possible for the data_ready handler called from the UDP transport socket to completely instantiate an rxrpc_call structure and make it immediately live by preallocating all the memory it might need. The idea is to cut out the background thread usage as much as possible. [Note that the preallocated structs are not actually used in this patch - that will be done in a future patch.] If insufficient resources are available in the preallocation buffers, it will be possible to discard the DATA packet in the data_ready handler or schedule a BUSY packet without the need to schedule an attempt at allocation in a background thread. To this end: (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a maximum number each of the listen backlog size. The backlog size is limited to a maxmimum of 32. Only this many of each can be in the preallocation buffer. (2) For userspace sockets, the preallocation is charged initially by listen() and will be recharged by accepting or rejecting pending new incoming calls. (3) For kernel services {,re,dis}charging of the preallocation buffers is handled manually. Two notifier callbacks have to be provided before kernel_listen() is invoked: (a) An indication that a new call has been instantiated. This can be used to trigger background recharging. (b) An indication that a call is being discarded. This is used when the socket is being released. A function, rxrpc_kernel_charge_accept() is called by the kernel service to preallocate a single call. It should be passed the user ID to be used for that call and a callback to associate the rxrpc call with the kernel service's side of the ID. (4) Discard the preallocation when the socket is closed. (5) Temporarily bump the refcount on the call allocated in rxrpc_incoming_call() so that rxrpc_release_call() can ditch the preallocation ref on service calls unconditionally. This will no longer be necessary once the preallocation is used. Note that this does not yet control the number of active service calls on a client - that will come in a later patch. A future development would be to provide a setsockopt() call that allows a userspace server to manually charge the preallocation buffer. This would allow user call IDs to be provided in advance and the awkward manual accept stage to be bypassed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
void rxrpc_cleanup_call(struct rxrpc_call *);
void rxrpc_destroy_all_calls(struct rxrpc_net *);
static inline bool rxrpc_is_service_call(const struct rxrpc_call *call)
{
return test_bit(RXRPC_CALL_IS_SERVICE, &call->flags);
}
static inline bool rxrpc_is_client_call(const struct rxrpc_call *call)
{
return !rxrpc_is_service_call(call);
}
/*
* call_state.c
*/
bool rxrpc_set_call_completion(struct rxrpc_call *call,
enum rxrpc_call_completion compl,
u32 abort_code,
int error);
bool rxrpc_call_completed(struct rxrpc_call *call);
bool rxrpc_abort_call(struct rxrpc_call *call, rxrpc_seq_t seq,
u32 abort_code, int error, enum rxrpc_abort_reason why);
void rxrpc_prefail_call(struct rxrpc_call *call, enum rxrpc_call_completion compl,
int error);
static inline void rxrpc_set_call_state(struct rxrpc_call *call,
enum rxrpc_call_state state)
{
/* Order write of completion info before write of ->state. */
smp_store_release(&call->_state, state);
wake_up(&call->waitq);
}
static inline enum rxrpc_call_state __rxrpc_call_state(const struct rxrpc_call *call)
{
return call->_state; /* Only inside I/O thread */
}
static inline bool __rxrpc_call_is_complete(const struct rxrpc_call *call)
{
return __rxrpc_call_state(call) == RXRPC_CALL_COMPLETE;
}
static inline enum rxrpc_call_state rxrpc_call_state(const struct rxrpc_call *call)
{
/* Order read ->state before read of completion info. */
return smp_load_acquire(&call->_state);
}
static inline bool rxrpc_call_is_complete(const struct rxrpc_call *call)
{
return rxrpc_call_state(call) == RXRPC_CALL_COMPLETE;
}
static inline bool rxrpc_call_has_failed(const struct rxrpc_call *call)
{
return rxrpc_call_is_complete(call) && call->completion != RXRPC_CALL_SUCCEEDED;
}
2016-04-04 21:00:37 +08:00
/*
* conn_client.c
*/
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 14:30:52 +08:00
extern unsigned int rxrpc_reap_client_connections;
rxrpc: Fix call timeouts Fix the rxrpc call expiration timeouts and make them settable from userspace. By analogy with other rx implementations, there should be three timeouts: (1) "Normal timeout" This is set for all calls and is triggered if we haven't received any packets from the peer in a while. It is measured from the last time we received any packet on that call. This is not reset by any connection packets (such as CHALLENGE/RESPONSE packets). If a service operation takes a long time, the server should generate PING ACKs at a duration that's substantially less than the normal timeout so is to keep both sides alive. This is set at 1/6 of normal timeout. (2) "Idle timeout" This is set only for a service call and is triggered if we stop receiving the DATA packets that comprise the request data. It is measured from the last time we received a DATA packet. (3) "Hard timeout" This can be set for a call and specified the maximum lifetime of that call. It should not be specified by default. Some operations (such as volume transfer) take a long time. Allow userspace to set/change the timeouts on a call with sendmsg, using a control message: RXRPC_SET_CALL_TIMEOUTS The data to the message is a number of 32-bit words, not all of which need be given: u32 hard_timeout; /* sec from first packet */ u32 idle_timeout; /* msec from packet Rx */ u32 normal_timeout; /* msec from data Rx */ This can be set in combination with any other sendmsg() that affects a call. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 18:18:41 +08:00
extern unsigned long rxrpc_conn_idle_client_expiry;
extern unsigned long rxrpc_conn_idle_client_fast_expiry;
2016-04-04 21:00:37 +08:00
void rxrpc_purge_client_connections(struct rxrpc_local *local);
struct rxrpc_bundle *rxrpc_get_bundle(struct rxrpc_bundle *, enum rxrpc_bundle_trace);
void rxrpc_put_bundle(struct rxrpc_bundle *, enum rxrpc_bundle_trace);
int rxrpc_look_up_bundle(struct rxrpc_call *call, gfp_t gfp);
void rxrpc_connect_client_calls(struct rxrpc_local *local);
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 14:30:52 +08:00
void rxrpc_expose_client_call(struct rxrpc_call *);
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 18:15:32 +08:00
void rxrpc_disconnect_client_call(struct rxrpc_bundle *, struct rxrpc_call *);
void rxrpc_deactivate_bundle(struct rxrpc_bundle *bundle);
void rxrpc_put_client_conn(struct rxrpc_connection *, enum rxrpc_conn_trace);
void rxrpc_discard_expired_client_conns(struct rxrpc_local *local);
rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2] When a local endpoint is ceases to be in use, such as when the kafs module is unloaded, the kernel will emit an assertion failure if there are any outstanding client connections: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:433! and even beyond that, will evince other oopses if there are service connections still present. Fix this by: (1) Removing the triggering of connection reaping when an rxrpc socket is released. These don't actually clean up the connections anyway - and further, the local endpoint may still be in use through another socket. (2) Mark the local endpoint as dead when we start the process of tearing it down. (3) When destroying a local endpoint, strip all of its client connections from the idle list and discard the ref on each that the list was holding. (4) When destroying a local endpoint, call the service connection reaper directly (rather than through a workqueue) to immediately kill off all outstanding service connections. (5) Make the service connection reaper reap connections for which the local endpoint is marked dead. Only after destroying the connections can we close the socket lest we get an oops in a workqueue that's looking at a connection or a peer. Fixes: 3d18cbb7fd0c ("rxrpc: Fix conn expiry timers") Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29 21:12:11 +08:00
void rxrpc_clean_up_local_conns(struct rxrpc_local *);
2016-04-04 21:00:37 +08:00
/*
* conn_event.c
*/
void rxrpc_conn_retransmit_call(struct rxrpc_connection *conn, struct sk_buff *skb,
unsigned int channel);
int rxrpc_abort_conn(struct rxrpc_connection *conn, struct sk_buff *skb,
s32 abort_code, int err, enum rxrpc_abort_reason why);
void rxrpc_process_connection(struct work_struct *);
void rxrpc_process_delayed_final_acks(struct rxrpc_connection *, bool);
bool rxrpc_input_conn_packet(struct rxrpc_connection *conn, struct sk_buff *skb);
void rxrpc_input_conn_event(struct rxrpc_connection *conn, struct sk_buff *skb);
static inline bool rxrpc_is_conn_aborted(const struct rxrpc_connection *conn)
{
/* Order reading the abort info after the state check. */
return smp_load_acquire(&conn->state) == RXRPC_CONN_ABORTED;
}
/*
* conn_object.c
*/
extern unsigned int rxrpc_connection_expiry;
extern unsigned int rxrpc_closed_conn_expiry;
void rxrpc_poke_conn(struct rxrpc_connection *conn, enum rxrpc_conn_trace why);
rxrpc: Don't hold a ref for connection workqueue Currently, rxrpc gives the connection's work item a ref on the connection when it queues it - and this is called from the timer expiration function. The problem comes when queue_work() fails (ie. the work item is already queued): the timer routine must put the ref - but this may cause the cleanup code to run. This has the unfortunate effect that the cleanup code may then be run in softirq context - which means that any spinlocks it might need to touch have to be guarded to disable softirqs (ie. they need a "_bh" suffix). (1) Don't give a ref to the work item. (2) Simplify handling of service connections by adding a separate active count so that the refcount isn't also used for this. (3) Connection destruction for both client and service connections can then be cleaned up by putting rxrpc_put_connection() out of line and making a tidy progression through the destruction code (offloaded to a workqueue if put from softirq or processor function context). The RCU part of the cleanup then only deals with the freeing at the end. (4) Make rxrpc_queue_conn() return immediately if it sees the active count is -1 rather then queuing the connection. (5) Make sure that the cleanup routine waits for the work item to complete. (6) Stash the rxrpc_net pointer in the conn struct so that the rcu free routine can use it, even if the local endpoint has been freed. Unfortunately, neither the timer nor the work item can simply get around the problem by just using refcount_inc_not_zero() as the waits would still have to be done, and there would still be the possibility of having to put the ref in the expiration function. Note the connection work item is mostly going to go away with the main event work being transferred to the I/O thread, so the wait in (6) will become obsolete. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-11-25 20:43:50 +08:00
struct rxrpc_connection *rxrpc_alloc_connection(struct rxrpc_net *, gfp_t);
struct rxrpc_connection *rxrpc_find_client_connection_rcu(struct rxrpc_local *,
struct sockaddr_rxrpc *,
struct sk_buff *);
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 14:30:52 +08:00
void __rxrpc_disconnect_call(struct rxrpc_connection *, struct rxrpc_call *);
void rxrpc_disconnect_call(struct rxrpc_call *);
rxrpc: Don't hold a ref for connection workqueue Currently, rxrpc gives the connection's work item a ref on the connection when it queues it - and this is called from the timer expiration function. The problem comes when queue_work() fails (ie. the work item is already queued): the timer routine must put the ref - but this may cause the cleanup code to run. This has the unfortunate effect that the cleanup code may then be run in softirq context - which means that any spinlocks it might need to touch have to be guarded to disable softirqs (ie. they need a "_bh" suffix). (1) Don't give a ref to the work item. (2) Simplify handling of service connections by adding a separate active count so that the refcount isn't also used for this. (3) Connection destruction for both client and service connections can then be cleaned up by putting rxrpc_put_connection() out of line and making a tidy progression through the destruction code (offloaded to a workqueue if put from softirq or processor function context). The RCU part of the cleanup then only deals with the freeing at the end. (4) Make rxrpc_queue_conn() return immediately if it sees the active count is -1 rather then queuing the connection. (5) Make sure that the cleanup routine waits for the work item to complete. (6) Stash the rxrpc_net pointer in the conn struct so that the rcu free routine can use it, even if the local endpoint has been freed. Unfortunately, neither the timer nor the work item can simply get around the problem by just using refcount_inc_not_zero() as the waits would still have to be done, and there would still be the possibility of having to put the ref in the expiration function. Note the connection work item is mostly going to go away with the main event work being transferred to the I/O thread, so the wait in (6) will become obsolete. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-11-25 20:43:50 +08:00
void rxrpc_kill_client_conn(struct rxrpc_connection *);
void rxrpc_queue_conn(struct rxrpc_connection *, enum rxrpc_conn_trace);
void rxrpc_see_connection(struct rxrpc_connection *, enum rxrpc_conn_trace);
struct rxrpc_connection *rxrpc_get_connection(struct rxrpc_connection *,
enum rxrpc_conn_trace);
struct rxrpc_connection *rxrpc_get_connection_maybe(struct rxrpc_connection *,
enum rxrpc_conn_trace);
rxrpc: Don't hold a ref for connection workqueue Currently, rxrpc gives the connection's work item a ref on the connection when it queues it - and this is called from the timer expiration function. The problem comes when queue_work() fails (ie. the work item is already queued): the timer routine must put the ref - but this may cause the cleanup code to run. This has the unfortunate effect that the cleanup code may then be run in softirq context - which means that any spinlocks it might need to touch have to be guarded to disable softirqs (ie. they need a "_bh" suffix). (1) Don't give a ref to the work item. (2) Simplify handling of service connections by adding a separate active count so that the refcount isn't also used for this. (3) Connection destruction for both client and service connections can then be cleaned up by putting rxrpc_put_connection() out of line and making a tidy progression through the destruction code (offloaded to a workqueue if put from softirq or processor function context). The RCU part of the cleanup then only deals with the freeing at the end. (4) Make rxrpc_queue_conn() return immediately if it sees the active count is -1 rather then queuing the connection. (5) Make sure that the cleanup routine waits for the work item to complete. (6) Stash the rxrpc_net pointer in the conn struct so that the rcu free routine can use it, even if the local endpoint has been freed. Unfortunately, neither the timer nor the work item can simply get around the problem by just using refcount_inc_not_zero() as the waits would still have to be done, and there would still be the possibility of having to put the ref in the expiration function. Note the connection work item is mostly going to go away with the main event work being transferred to the I/O thread, so the wait in (6) will become obsolete. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-11-25 20:43:50 +08:00
void rxrpc_put_connection(struct rxrpc_connection *, enum rxrpc_conn_trace);
void rxrpc_service_connection_reaper(struct work_struct *);
void rxrpc_destroy_all_connections(struct rxrpc_net *);
static inline bool rxrpc_conn_is_client(const struct rxrpc_connection *conn)
{
return conn->out_clientflag;
}
static inline bool rxrpc_conn_is_service(const struct rxrpc_connection *conn)
{
return !rxrpc_conn_is_client(conn);
}
static inline void rxrpc_reduce_conn_timer(struct rxrpc_connection *conn,
unsigned long expire_at)
{
timer_reduce(&conn->timer, expire_at);
}
/*
* conn_service.c
*/
struct rxrpc_connection *rxrpc_find_service_conn_rcu(struct rxrpc_peer *,
struct sk_buff *);
struct rxrpc_connection *rxrpc_prealloc_service_connection(struct rxrpc_net *, gfp_t);
void rxrpc_new_incoming_connection(struct rxrpc_sock *, struct rxrpc_connection *,
const struct rxrpc_security *, struct sk_buff *);
rxrpc: Maintain an extra ref on a conn for the cache list Overhaul the usage count accounting for the rxrpc_connection struct to make it easier to implement RCU access from the data_ready handler. The problem is that currently we're using a lock to prevent the garbage collector from trying to clean up a connection that we're contemplating unidling. We could just stick incoming packets on the connection we find, but we've then got a problem that we may race when dispatching a work item to process it as we need to give that a ref to prevent the rxrpc_connection struct from disappearing in the meantime. Further, incoming packets may get discarded if attached to an rxrpc_connection struct that is going away. Whilst this is not a total disaster - the client will presumably resend - it would delay processing of the call. This would affect the AFS client filesystem's service manager operation. To this end: (1) We now maintain an extra count on the connection usage count whilst it is on the connection list. This mean it is not in use when its refcount is 1. (2) When trying to reuse an old connection, we only increment the refcount if it is greater than 0. If it is 0, we replace it in the tree with a new candidate connection. (3) Two connection flags are added to indicate whether or not a connection is in the local's client connection tree (used by sendmsg) or the peer's service connection tree (used by data_ready). This makes sure that we don't try and remove a connection if it got replaced. The flags are tested under lock with the removal operation to prevent the reaper from killing the rxrpc_connection struct whilst someone else is trying to effect a replacement. This could probably be alleviated by using memory barriers between the flag set/test and the rb_tree ops. The rb_tree op would still need to be under the lock, however. (4) When trying to reap an old connection, we try to flip the usage count from 1 to 0. If it's not 1 at that point, then it must've come back to life temporarily and we ignore it. Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-30 17:45:22 +08:00
void rxrpc_unpublish_service_conn(struct rxrpc_connection *);
/*
* input.c
*/
void rxrpc_congestion_degrade(struct rxrpc_call *);
void rxrpc_input_call_packet(struct rxrpc_call *, struct sk_buff *);
void rxrpc_implicit_end_call(struct rxrpc_call *, struct sk_buff *);
/*
* io_thread.c
*/
int rxrpc_encap_rcv(struct sock *, struct sk_buff *);
void rxrpc_error_report(struct sock *);
bool rxrpc_direct_abort(struct sk_buff *skb, enum rxrpc_abort_reason why,
s32 abort_code, int err);
int rxrpc_io_thread(void *data);
static inline void rxrpc_wake_up_io_thread(struct rxrpc_local *local)
{
wake_up_process(local->io_thread);
}
static inline bool rxrpc_protocol_error(struct sk_buff *skb, enum rxrpc_abort_reason why)
{
return rxrpc_direct_abort(skb, why, RX_PROTOCOL_ERROR, -EPROTO);
}
/*
* insecure.c
*/
extern const struct rxrpc_security rxrpc_no_security;
/*
* key.c
*/
extern struct key_type key_type_rxrpc;
int rxrpc_request_key(struct rxrpc_sock *, sockptr_t , int);
int rxrpc_get_server_data_key(struct rxrpc_connection *, const void *, time64_t,
u32);
/*
* local_event.c
*/
void rxrpc_send_version_request(struct rxrpc_local *local,
struct rxrpc_host_header *hdr,
struct sk_buff *skb);
/*
* local_object.c
*/
struct rxrpc_local *rxrpc_lookup_local(struct net *, const struct sockaddr_rxrpc *);
struct rxrpc_local *rxrpc_get_local(struct rxrpc_local *, enum rxrpc_local_trace);
struct rxrpc_local *rxrpc_get_local_maybe(struct rxrpc_local *, enum rxrpc_local_trace);
void rxrpc_put_local(struct rxrpc_local *, enum rxrpc_local_trace);
struct rxrpc_local *rxrpc_use_local(struct rxrpc_local *, enum rxrpc_local_trace);
void rxrpc_unuse_local(struct rxrpc_local *, enum rxrpc_local_trace);
void rxrpc_destroy_local(struct rxrpc_local *local);
void rxrpc_destroy_all_locals(struct rxrpc_net *);
static inline bool __rxrpc_use_local(struct rxrpc_local *local,
enum rxrpc_local_trace why)
{
int r, u;
r = refcount_read(&local->ref);
u = atomic_fetch_add_unless(&local->active_users, 1, 0);
trace_rxrpc_local(local->debug_id, why, r, u);
return u != 0;
}
static inline void rxrpc_see_local(struct rxrpc_local *local,
enum rxrpc_local_trace why)
{
int r, u;
r = refcount_read(&local->ref);
u = atomic_read(&local->active_users);
trace_rxrpc_local(local->debug_id, why, r, u);
}
/*
* misc.c
*/
extern unsigned int rxrpc_max_backlog __read_mostly;
rxrpc: Fix call timeouts Fix the rxrpc call expiration timeouts and make them settable from userspace. By analogy with other rx implementations, there should be three timeouts: (1) "Normal timeout" This is set for all calls and is triggered if we haven't received any packets from the peer in a while. It is measured from the last time we received any packet on that call. This is not reset by any connection packets (such as CHALLENGE/RESPONSE packets). If a service operation takes a long time, the server should generate PING ACKs at a duration that's substantially less than the normal timeout so is to keep both sides alive. This is set at 1/6 of normal timeout. (2) "Idle timeout" This is set only for a service call and is triggered if we stop receiving the DATA packets that comprise the request data. It is measured from the last time we received a DATA packet. (3) "Hard timeout" This can be set for a call and specified the maximum lifetime of that call. It should not be specified by default. Some operations (such as volume transfer) take a long time. Allow userspace to set/change the timeouts on a call with sendmsg, using a control message: RXRPC_SET_CALL_TIMEOUTS The data to the message is a number of 32-bit words, not all of which need be given: u32 hard_timeout; /* sec from first packet */ u32 idle_timeout; /* msec from packet Rx */ u32 normal_timeout; /* msec from data Rx */ This can be set in combination with any other sendmsg() that affects a call. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 18:18:41 +08:00
extern unsigned long rxrpc_soft_ack_delay;
extern unsigned long rxrpc_idle_ack_delay;
extern unsigned int rxrpc_rx_window_size;
extern unsigned int rxrpc_rx_mtu;
extern unsigned int rxrpc_rx_jumbo_max;
#ifdef CONFIG_AF_RXRPC_INJECT_RX_DELAY
extern unsigned long rxrpc_inject_rx_delay;
#endif
/*
* net_ns.c
*/
extern unsigned int rxrpc_net_id;
extern struct pernet_operations rxrpc_net_ops;
static inline struct rxrpc_net *rxrpc_net(struct net *net)
{
return net_generic(net, rxrpc_net_id);
}
/*
* output.c
*/
int rxrpc_send_ack_packet(struct rxrpc_call *call, struct rxrpc_txbuf *txb);
int rxrpc_send_abort_packet(struct rxrpc_call *);
rxrpc: Don't use a ring buffer for call Tx queue Change the way the Tx queueing works to make the following ends easier to achieve: (1) The filling of packets, the encryption of packets and the transmission of packets can be handled in parallel by separate threads, rather than rxrpc_sendmsg() allocating, filling, encrypting and transmitting each packet before moving onto the next one. (2) Get rid of the fixed-size ring which sets a hard limit on the number of packets that can be retained in the ring. This allows the number of packets to increase without having to allocate a very large ring or having variable-sized rings. [Note: the downside of this is that it's then less efficient to locate a packet for retransmission as we then have to step through a list and examine each buffer in the list.] (3) Allow the filler/encrypter to run ahead of the transmission window. (4) Make it easier to do zero copy UDP from the packet buffers. (5) Make it easier to do zero copy from userspace to the packet buffers - and thence to UDP (only if for unauthenticated connections). To that end, the following changes are made: (1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets to be transmitted in. This allows them to be placed on multiple queues simultaneously. An sk_buff isn't really necessary as it's never passed on to lower-level networking code. (2) Keep the transmissable packets in a linked list on the call struct rather than in a ring. As a consequence, the annotation buffer isn't used either; rather a flag is set on the packet to indicate ackedness. (3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate that all packets up to and including the last got hard acked. (4) Wire headers are now stored in the txbuf rather than being concocted on the stack and they're stored immediately before the data, thereby allowing zerocopy of a single span. (5) Don't bother with instant-resend on transmission failure; rather, leave it for a timer or an ACK packet to trigger. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-04-01 06:55:08 +08:00
int rxrpc_send_data_packet(struct rxrpc_call *, struct rxrpc_txbuf *);
void rxrpc_send_conn_abort(struct rxrpc_connection *conn);
void rxrpc_reject_packet(struct rxrpc_local *local, struct sk_buff *skb);
void rxrpc_send_keepalive(struct rxrpc_peer *);
void rxrpc_transmit_one(struct rxrpc_call *call, struct rxrpc_txbuf *txb);
/*
* peer_event.c
*/
void rxrpc_input_error(struct rxrpc_local *, struct sk_buff *);
void rxrpc_peer_keepalive_worker(struct work_struct *);
/*
* peer_object.c
*/
struct rxrpc_peer *rxrpc_lookup_peer_rcu(struct rxrpc_local *,
const struct sockaddr_rxrpc *);
struct rxrpc_peer *rxrpc_lookup_peer(struct rxrpc_local *local,
struct sockaddr_rxrpc *srx, gfp_t gfp);
struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *, gfp_t,
enum rxrpc_peer_trace);
void rxrpc_new_incoming_peer(struct rxrpc_local *local, struct rxrpc_peer *peer);
void rxrpc_destroy_all_peers(struct rxrpc_net *);
struct rxrpc_peer *rxrpc_get_peer(struct rxrpc_peer *, enum rxrpc_peer_trace);
struct rxrpc_peer *rxrpc_get_peer_maybe(struct rxrpc_peer *, enum rxrpc_peer_trace);
void rxrpc_put_peer(struct rxrpc_peer *, enum rxrpc_peer_trace);
/*
* proc.c
*/
extern const struct seq_operations rxrpc_call_seq_ops;
extern const struct seq_operations rxrpc_connection_seq_ops;
extern const struct seq_operations rxrpc_peer_seq_ops;
extern const struct seq_operations rxrpc_local_seq_ops;
/*
* recvmsg.c
*/
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
void rxrpc_notify_socket(struct rxrpc_call *);
int rxrpc_recvmsg(struct socket *, struct msghdr *, size_t, int);
/*
* Abort a call due to a protocol error.
*/
static inline int rxrpc_abort_eproto(struct rxrpc_call *call,
struct sk_buff *skb,
s32 abort_code,
enum rxrpc_abort_reason why)
{
struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
rxrpc_abort_call(call, sp->hdr.seq, abort_code, -EPROTO, why);
return -EPROTO;
}
rxrpc: Fix the excessive initial retransmission timeout rxrpc currently uses a fixed 4s retransmission timeout until the RTT is sufficiently sampled. This can cause problems with some fileservers with calls to the cache manager in the afs filesystem being dropped from the fileserver because a packet goes missing and the retransmission timeout is greater than the call expiry timeout. Fix this by: (1) Copying the RTT/RTO calculation code from Linux's TCP implementation and altering it to fit rxrpc. (2) Altering the various users of the RTT to make use of the new SRTT value. (3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO value instead (which is needed in jiffies), along with a backoff. Notes: (1) rxrpc provides RTT samples by matching the serial numbers on outgoing DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets against the reference serial number in incoming REQUESTED ACK and PING-RESPONSE ACK packets. (2) Each packet that is transmitted on an rxrpc connection gets a new per-connection serial number, even for retransmissions, so an ACK can be cross-referenced to a specific trigger packet. This allows RTT information to be drawn from retransmitted DATA packets also. (3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than on an rxrpc_call because many RPC calls won't live long enough to generate more than one sample. (4) The calculated SRTT value is in units of 8ths of a microsecond rather than nanoseconds. The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers. Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"") Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-11 21:54:34 +08:00
/*
* rtt.c
*/
rxrpc: Fix loss of RTT samples due to interposed ACK The Rx protocol has a mechanism to help generate RTT samples that works by a client transmitting a REQUESTED-type ACK when it receives a DATA packet that has the REQUEST_ACK flag set. The peer, however, may interpose other ACKs before transmitting the REQUESTED-ACK, as can be seen in the following trace excerpt: rxrpc_tx_data: c=00000044 DATA d0b5ece8:00000001 00000001 q=00000001 fl=07 rxrpc_rx_ack: c=00000044 00000001 PNG r=00000000 f=00000002 p=00000000 n=0 rxrpc_rx_ack: c=00000044 00000002 REQ r=00000001 f=00000002 p=00000001 n=0 ... DATA packet 1 (q=xx) has REQUEST_ACK set (bit 1 of fl=xx). The incoming ping (labelled PNG) hard-acks the request DATA packet (f=xx exceeds the sequence number of the DATA packet), causing it to be discarded from the Tx ring. The ACK that was requested (labelled REQ, r=xx references the serial of the DATA packet) comes after the ping, but the sk_buff holding the timestamp has gone and the RTT sample is lost. This is particularly noticeable on RPC calls used to probe the service offered by the peer. A lot of peers end up with an unknown RTT because we only ever sent a single RPC. This confuses the server rotation algorithm. Fix this by caching the information about the outgoing packet in RTT calculations in the rxrpc_call struct rather than looking in the Tx ring. A four-deep buffer is maintained and both REQUEST_ACK-flagged DATA and PING-ACK transmissions are recorded in there. When the appropriate response ACK is received, the buffer is checked for a match and, if found, an RTT sample is recorded. If a received ACK refers to a packet with a later serial number than an entry in the cache, that entry is presumed lost and the entry is made available to record a new transmission. ACKs types other than REQUESTED-type and PING-type cause any matching sample to be cancelled as they don't necessarily represent a useful measurement. If there's no space in the buffer on ping/data transmission, the sample base is discarded. Fixes: 50235c4b5a2f ("rxrpc: Obtain RTT data by requesting ACKs on DATA packets") Signed-off-by: David Howells <dhowells@redhat.com>
2020-08-20 06:29:16 +08:00
void rxrpc_peer_add_rtt(struct rxrpc_call *, enum rxrpc_rtt_rx_trace, int,
rxrpc: Fix the excessive initial retransmission timeout rxrpc currently uses a fixed 4s retransmission timeout until the RTT is sufficiently sampled. This can cause problems with some fileservers with calls to the cache manager in the afs filesystem being dropped from the fileserver because a packet goes missing and the retransmission timeout is greater than the call expiry timeout. Fix this by: (1) Copying the RTT/RTO calculation code from Linux's TCP implementation and altering it to fit rxrpc. (2) Altering the various users of the RTT to make use of the new SRTT value. (3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO value instead (which is needed in jiffies), along with a backoff. Notes: (1) rxrpc provides RTT samples by matching the serial numbers on outgoing DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets against the reference serial number in incoming REQUESTED ACK and PING-RESPONSE ACK packets. (2) Each packet that is transmitted on an rxrpc connection gets a new per-connection serial number, even for retransmissions, so an ACK can be cross-referenced to a specific trigger packet. This allows RTT information to be drawn from retransmitted DATA packets also. (3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than on an rxrpc_call because many RPC calls won't live long enough to generate more than one sample. (4) The calculated SRTT value is in units of 8ths of a microsecond rather than nanoseconds. The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers. Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"") Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-11 21:54:34 +08:00
rxrpc_serial_t, rxrpc_serial_t, ktime_t, ktime_t);
unsigned long rxrpc_get_rto_backoff(struct rxrpc_peer *, bool);
void rxrpc_peer_init_rtt(struct rxrpc_peer *);
/*
* rxkad.c
*/
#ifdef CONFIG_RXKAD
extern const struct rxrpc_security rxkad;
#endif
/*
* security.c
*/
int __init rxrpc_init_security(void);
const struct rxrpc_security *rxrpc_security_lookup(u8);
void rxrpc_exit_security(void);
int rxrpc_init_client_call_security(struct rxrpc_call *);
int rxrpc_init_client_conn_security(struct rxrpc_connection *);
const struct rxrpc_security *rxrpc_get_incoming_security(struct rxrpc_sock *,
struct sk_buff *);
struct key *rxrpc_look_up_server_security(struct rxrpc_connection *,
struct sk_buff *, u32, u32);
/*
* sendmsg.c
*/
bool rxrpc_propose_abort(struct rxrpc_call *call, s32 abort_code, int error,
enum rxrpc_abort_reason why);
int rxrpc_do_sendmsg(struct rxrpc_sock *, struct msghdr *, size_t);
/*
* server_key.c
*/
extern struct key_type key_type_rxrpc_s;
int rxrpc_server_keyring(struct rxrpc_sock *, sockptr_t, int);
/*
* skbuff.c
*/
rxrpc: Don't expose skbs to in-kernel users [ver #2] Don't expose skbs to in-kernel users, such as the AFS filesystem, but instead provide a notification hook the indicates that a call needs attention and another that indicates that there's a new call to be collected. This makes the following possibilities more achievable: (1) Call refcounting can be made simpler if skbs don't hold refs to calls. (2) skbs referring to non-data events will be able to be freed much sooner rather than being queued for AFS to pick up as rxrpc_kernel_recv_data will be able to consult the call state. (3) We can shortcut the receive phase when a call is remotely aborted because we don't have to go through all the packets to get to the one cancelling the operation. (4) It makes it easier to do encryption/decryption directly between AFS's buffers and sk_buffs. (5) Encryption/decryption can more easily be done in the AFS's thread contexts - usually that of the userspace process that issued a syscall - rather than in one of rxrpc's background threads on a workqueue. (6) AFS will be able to wait synchronously on a call inside AF_RXRPC. To make this work, the following interface function has been added: int rxrpc_kernel_recv_data( struct socket *sock, struct rxrpc_call *call, void *buffer, size_t bufsize, size_t *_offset, bool want_more, u32 *_abort_code); This is the recvmsg equivalent. It allows the caller to find out about the state of a specific call and to transfer received data into a buffer piecemeal. afs_extract_data() and rxrpc_kernel_recv_data() now do all the extraction logic between them. They don't wait synchronously yet because the socket lock needs to be dealt with. Five interface functions have been removed: rxrpc_kernel_is_data_last() rxrpc_kernel_get_abort_code() rxrpc_kernel_get_error_number() rxrpc_kernel_free_skb() rxrpc_kernel_data_consumed() As a temporary hack, sk_buffs going to an in-kernel call are queued on the rxrpc_call struct (->knlrecv_queue) rather than being handed over to the in-kernel user. To process the queue internally, a temporary function, temp_deliver_data() has been added. This will be replaced with common code between the rxrpc_recvmsg() path and the kernel_rxrpc_recv_data() path in a future patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 03:42:14 +08:00
void rxrpc_kernel_data_consumed(struct rxrpc_call *, struct sk_buff *);
void rxrpc_new_skb(struct sk_buff *, enum rxrpc_skb_trace);
void rxrpc_see_skb(struct sk_buff *, enum rxrpc_skb_trace);
rxrpc: Use skb_unshare() rather than skb_cow_data() The in-place decryption routines in AF_RXRPC's rxkad security module currently call skb_cow_data() to make sure the data isn't shared and that the skb can be written over. This has a problem, however, as the softirq handler may be still holding a ref or the Rx ring may be holding multiple refs when skb_cow_data() is called in rxkad_verify_packet() - and so skb_shared() returns true and __pskb_pull_tail() dislikes that. If this occurs, something like the following report will be generated. kernel BUG at net/core/skbuff.c:1463! ... RIP: 0010:pskb_expand_head+0x253/0x2b0 ... Call Trace: __pskb_pull_tail+0x49/0x460 skb_cow_data+0x6f/0x300 rxkad_verify_packet+0x18b/0xb10 [rxrpc] rxrpc_recvmsg_data.isra.11+0x4a8/0xa10 [rxrpc] rxrpc_kernel_recv_data+0x126/0x240 [rxrpc] afs_extract_data+0x51/0x2d0 [kafs] afs_deliver_fs_fetch_data+0x188/0x400 [kafs] afs_deliver_to_call+0xac/0x430 [kafs] afs_wait_for_call_to_complete+0x22f/0x3d0 [kafs] afs_make_call+0x282/0x3f0 [kafs] afs_fs_fetch_data+0x164/0x300 [kafs] afs_fetch_data+0x54/0x130 [kafs] afs_readpages+0x20d/0x340 [kafs] read_pages+0x66/0x180 __do_page_cache_readahead+0x188/0x1a0 ondemand_readahead+0x17d/0x2e0 generic_file_read_iter+0x740/0xc10 __vfs_read+0x145/0x1a0 vfs_read+0x8c/0x140 ksys_read+0x4a/0xb0 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by using skb_unshare() instead in the input path for DATA packets that have a security index != 0. Non-DATA packets don't need in-place encryption and neither do unencrypted DATA packets. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Reported-by: Julian Wollrath <jwollrath@web.de> Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27 17:13:46 +08:00
void rxrpc_eaten_skb(struct sk_buff *, enum rxrpc_skb_trace);
void rxrpc_get_skb(struct sk_buff *, enum rxrpc_skb_trace);
void rxrpc_free_skb(struct sk_buff *, enum rxrpc_skb_trace);
void rxrpc_purge_queue(struct sk_buff_head *);
/*
* stats.c
*/
int rxrpc_stats_show(struct seq_file *seq, void *v);
int rxrpc_stats_clear(struct file *file, char *buf, size_t size);
#define rxrpc_inc_stat(rxnet, s) atomic_inc(&(rxnet)->s)
#define rxrpc_dec_stat(rxnet, s) atomic_dec(&(rxnet)->s)
/*
* sysctl.c
*/
#ifdef CONFIG_SYSCTL
extern int __init rxrpc_sysctl_init(void);
extern void rxrpc_sysctl_exit(void);
#else
static inline int __init rxrpc_sysctl_init(void) { return 0; }
static inline void rxrpc_sysctl_exit(void) {}
#endif
/*
* txbuf.c
*/
extern atomic_t rxrpc_nr_txbuf;
struct rxrpc_txbuf *rxrpc_alloc_txbuf(struct rxrpc_call *call, u8 packet_type,
gfp_t gfp);
void rxrpc_get_txbuf(struct rxrpc_txbuf *txb, enum rxrpc_txbuf_trace what);
void rxrpc_see_txbuf(struct rxrpc_txbuf *txb, enum rxrpc_txbuf_trace what);
void rxrpc_put_txbuf(struct rxrpc_txbuf *txb, enum rxrpc_txbuf_trace what);
/*
* utils.c
*/
int rxrpc_extract_addr_from_skb(struct sockaddr_rxrpc *, struct sk_buff *);
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
static inline bool before(u32 seq1, u32 seq2)
{
return (s32)(seq1 - seq2) < 0;
}
static inline bool before_eq(u32 seq1, u32 seq2)
{
return (s32)(seq1 - seq2) <= 0;
}
static inline bool after(u32 seq1, u32 seq2)
{
return (s32)(seq1 - seq2) > 0;
}
static inline bool after_eq(u32 seq1, u32 seq2)
{
return (s32)(seq1 - seq2) >= 0;
}
/*
* debug tracing
*/
extern unsigned int rxrpc_debug;
#define dbgprintk(FMT,...) \
printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
#define kenter(FMT,...) dbgprintk("==> %s("FMT")",__func__ ,##__VA_ARGS__)
#define kleave(FMT,...) dbgprintk("<== %s()"FMT"",__func__ ,##__VA_ARGS__)
#define kdebug(FMT,...) dbgprintk(" "FMT ,##__VA_ARGS__)
#if defined(__KDEBUG)
#define _enter(FMT,...) kenter(FMT,##__VA_ARGS__)
#define _leave(FMT,...) kleave(FMT,##__VA_ARGS__)
#define _debug(FMT,...) kdebug(FMT,##__VA_ARGS__)
#elif defined(CONFIG_AF_RXRPC_DEBUG)
#define RXRPC_DEBUG_KENTER 0x01
#define RXRPC_DEBUG_KLEAVE 0x02
#define RXRPC_DEBUG_KDEBUG 0x04
#define _enter(FMT,...) \
do { \
if (unlikely(rxrpc_debug & RXRPC_DEBUG_KENTER)) \
kenter(FMT,##__VA_ARGS__); \
} while (0)
#define _leave(FMT,...) \
do { \
if (unlikely(rxrpc_debug & RXRPC_DEBUG_KLEAVE)) \
kleave(FMT,##__VA_ARGS__); \
} while (0)
#define _debug(FMT,...) \
do { \
if (unlikely(rxrpc_debug & RXRPC_DEBUG_KDEBUG)) \
kdebug(FMT,##__VA_ARGS__); \
} while (0)
#else
#define _enter(FMT,...) no_printk("==> %s("FMT")",__func__ ,##__VA_ARGS__)
#define _leave(FMT,...) no_printk("<== %s()"FMT"",__func__ ,##__VA_ARGS__)
#define _debug(FMT,...) no_printk(" "FMT ,##__VA_ARGS__)
#endif
/*
* debug assertion checking
*/
#if 1 // defined(__KDEBUGALL)
#define ASSERT(X) \
do { \
if (unlikely(!(X))) { \
pr_err("Assertion failed\n"); \
BUG(); \
} \
} while (0)
#define ASSERTCMP(X, OP, Y) \
do { \
__typeof__(X) _x = (X); \
__typeof__(Y) _y = (__typeof__(X))(Y); \
if (unlikely(!(_x OP _y))) { \
pr_err("Assertion failed - %lu(0x%lx) %s %lu(0x%lx) is false\n", \
(unsigned long)_x, (unsigned long)_x, #OP, \
(unsigned long)_y, (unsigned long)_y); \
BUG(); \
} \
} while (0)
#define ASSERTIF(C, X) \
do { \
if (unlikely((C) && !(X))) { \
pr_err("Assertion failed\n"); \
BUG(); \
} \
} while (0)
#define ASSERTIFCMP(C, X, OP, Y) \
do { \
__typeof__(X) _x = (X); \
__typeof__(Y) _y = (__typeof__(X))(Y); \
if (unlikely((C) && !(_x OP _y))) { \
pr_err("Assertion failed - %lu(0x%lx) %s %lu(0x%lx) is false\n", \
(unsigned long)_x, (unsigned long)_x, #OP, \
(unsigned long)_y, (unsigned long)_y); \
BUG(); \
} \
} while (0)
#else
#define ASSERT(X) \
do { \
} while (0)
#define ASSERTCMP(X, OP, Y) \
do { \
} while (0)
#define ASSERTIF(C, X) \
do { \
} while (0)
#define ASSERTIFCMP(C, X, OP, Y) \
do { \
} while (0)
#endif /* __KDEBUGALL */