korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-28 13:34:38 +08:00
Code Issues Packages Projects Releases Wiki Activity
8d2ff12653
linux/drivers/net/dsa/ocelot/felix.c

766 lines
19 KiB
C
Raw Normal View History

net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
// SPDX-License-Identifier: GPL-2.0
/* Copyright 2019 NXP Semiconductors
*/
#include <uapi/linux/if_bridge.h>
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
#include <soc/mscc/ocelot_qsys.h>
#include <soc/mscc/ocelot_sys.h>
#include <soc/mscc/ocelot_dev.h>
#include <soc/mscc/ocelot_ana.h>
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
#include <soc/mscc/ocelot.h>
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
#include <linux/packing.h>
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
#include <linux/module.h>
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
#include <linux/of_net.h>
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
#include <linux/pci.h>
#include <linux/of.h>
#include <net/dsa.h>
#include "felix.h"
static enum dsa_tag_protocol felix_get_tag_protocol(struct dsa_switch *ds,
int port)
{
return DSA_TAG_PROTO_OCELOT;
}
static int felix_set_ageing_time(struct dsa_switch *ds,
unsigned int ageing_time)
{
struct ocelot *ocelot = ds->priv;
ocelot_set_ageing_time(ocelot, ageing_time);
return 0;
}
static int felix_fdb_dump(struct dsa_switch *ds, int port,
dsa_fdb_dump_cb_t *cb, void *data)
{
struct ocelot *ocelot = ds->priv;
return ocelot_fdb_dump(ocelot, port, cb, data);
}
static int felix_fdb_add(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
struct ocelot *ocelot = ds->priv;
bool vlan_aware;
vlan_aware = dsa_port_is_vlan_filtering(dsa_to_port(ds, port));
return ocelot_fdb_add(ocelot, port, addr, vid, vlan_aware);
}
static int felix_fdb_del(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
struct ocelot *ocelot = ds->priv;
return ocelot_fdb_del(ocelot, port, addr, vid);
}
static void felix_bridge_stp_state_set(struct dsa_switch *ds, int port,
u8 state)
{
struct ocelot *ocelot = ds->priv;
return ocelot_bridge_stp_state_set(ocelot, port, state);
}
static int felix_bridge_join(struct dsa_switch *ds, int port,
struct net_device *br)
{
struct ocelot *ocelot = ds->priv;
return ocelot_port_bridge_join(ocelot, port, br);
}
static void felix_bridge_leave(struct dsa_switch *ds, int port,
struct net_device *br)
{
struct ocelot *ocelot = ds->priv;
ocelot_port_bridge_leave(ocelot, port, br);
}
/* This callback needs to be present */
static int felix_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
return 0;
}
static int felix_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
{
struct ocelot *ocelot = ds->priv;
ocelot_port_vlan_filtering(ocelot, port, enabled);
return 0;
}
static void felix_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
struct ocelot *ocelot = ds->priv;
u16 vid;
int err;
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
err = ocelot_vlan_add(ocelot, port, vid,
vlan->flags & BRIDGE_VLAN_INFO_PVID,
vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
if (err) {
dev_err(ds->dev, "Failed to add VLAN %d to port %d: %d\n",
vid, port, err);
return;
}
}
}
static int felix_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
struct ocelot *ocelot = ds->priv;
u16 vid;
int err;
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
err = ocelot_vlan_del(ocelot, port, vid);
if (err) {
dev_err(ds->dev, "Failed to remove VLAN %d from port %d: %d\n",
vid, port, err);
return err;
}
}
return 0;
}
static int felix_port_enable(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct ocelot *ocelot = ds->priv;
ocelot_port_enable(ocelot, port, phy);
return 0;
}
static void felix_port_disable(struct dsa_switch *ds, int port)
{
struct ocelot *ocelot = ds->priv;
return ocelot_port_disable(ocelot, port);
}
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
static void felix_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
{
struct ocelot *ocelot = ds->priv;
struct ocelot_port *ocelot_port = ocelot->ports[port];
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
if (state->interface != PHY_INTERFACE_MODE_NA &&
state->interface != ocelot_port->phy_mode) {
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
return;
}
/* No half-duplex. */
phylink_set_port_modes(mask);
phylink_set(mask, Autoneg);
phylink_set(mask, Pause);
phylink_set(mask, Asym_Pause);
if (state->interface != PHY_INTERFACE_MODE_2500BASEX) {
phylink_set(mask, 10baseT_Full);
phylink_set(mask, 100baseT_Full);
phylink_set(mask, 1000baseT_Full);
}
/* The internal ports that run at 2.5G are overclocked GMII */
if (state->interface == PHY_INTERFACE_MODE_GMII ||
state->interface == PHY_INTERFACE_MODE_2500BASEX ||
state->interface == PHY_INTERFACE_MODE_USXGMII) {
phylink_set(mask, 2500baseT_Full);
phylink_set(mask, 2500baseX_Full);
}
bitmap_and(supported, supported, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
bitmap_and(state->advertising, state->advertising, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
}
static int felix_phylink_mac_pcs_get_state(struct dsa_switch *ds, int port,
struct phylink_link_state *state)
{
struct ocelot *ocelot = ds->priv;
struct felix *felix = ocelot_to_felix(ocelot);
if (felix->info->pcs_link_state)
felix->info->pcs_link_state(ocelot, port, state);
return 0;
}
static void felix_phylink_mac_config(struct dsa_switch *ds, int port,
unsigned int link_an_mode,
const struct phylink_link_state *state)
{
struct ocelot *ocelot = ds->priv;
struct ocelot_port *ocelot_port = ocelot->ports[port];
struct felix *felix = ocelot_to_felix(ocelot);
u32 mac_fc_cfg;
/* Take port out of reset by clearing the MAC_TX_RST, MAC_RX_RST and
* PORT_RST bits in CLOCK_CFG
*/
ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(state->speed),
DEV_CLOCK_CFG);
/* Flow control. Link speed is only used here to evaluate the time
* specification in incoming pause frames.
*/
mac_fc_cfg = SYS_MAC_FC_CFG_FC_LINK_SPEED(state->speed);
if (state->pause & MLO_PAUSE_RX)
mac_fc_cfg |= SYS_MAC_FC_CFG_RX_FC_ENA;
if (state->pause & MLO_PAUSE_TX)
mac_fc_cfg |= SYS_MAC_FC_CFG_TX_FC_ENA |
SYS_MAC_FC_CFG_PAUSE_VAL_CFG(0xffff) |
SYS_MAC_FC_CFG_FC_LATENCY_CFG(0x7) |
SYS_MAC_FC_CFG_ZERO_PAUSE_ENA;
ocelot_write_rix(ocelot, mac_fc_cfg, SYS_MAC_FC_CFG, port);
ocelot_write_rix(ocelot, 0, ANA_POL_FLOWC, port);
if (felix->info->pcs_init)
felix->info->pcs_init(ocelot, port, link_an_mode, state);
}
static void felix_phylink_mac_an_restart(struct dsa_switch *ds, int port)
{
struct ocelot *ocelot = ds->priv;
struct felix *felix = ocelot_to_felix(ocelot);
if (felix->info->pcs_an_restart)
felix->info->pcs_an_restart(ocelot, port);
}
static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port,
unsigned int link_an_mode,
phy_interface_t interface)
{
struct ocelot *ocelot = ds->priv;
struct ocelot_port *ocelot_port = ocelot->ports[port];
ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);
ocelot_rmw_rix(ocelot, 0, QSYS_SWITCH_PORT_MODE_PORT_ENA,
QSYS_SWITCH_PORT_MODE, port);
}
static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int link_an_mode,
phy_interface_t interface,
struct phy_device *phydev)
{
struct ocelot *ocelot = ds->priv;
struct ocelot_port *ocelot_port = ocelot->ports[port];
/* Enable MAC module */
ocelot_port_writel(ocelot_port, DEV_MAC_ENA_CFG_RX_ENA |
DEV_MAC_ENA_CFG_TX_ENA, DEV_MAC_ENA_CFG);
/* Enable receiving frames on the port, and activate auto-learning of
* MAC addresses.
*/
ocelot_write_gix(ocelot, ANA_PORT_PORT_CFG_LEARNAUTO |
ANA_PORT_PORT_CFG_RECV_ENA |
ANA_PORT_PORT_CFG_PORTID_VAL(port),
ANA_PORT_PORT_CFG, port);
/* Core: Enable port for frame transfer */
ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
QSYS_SWITCH_PORT_MODE_PORT_ENA,
QSYS_SWITCH_PORT_MODE, port);
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
static void felix_get_strings(struct dsa_switch *ds, int port,
u32 stringset, u8 *data)
{
struct ocelot *ocelot = ds->priv;
return ocelot_get_strings(ocelot, port, stringset, data);
}
static void felix_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data)
{
struct ocelot *ocelot = ds->priv;
ocelot_get_ethtool_stats(ocelot, port, data);
}
static int felix_get_sset_count(struct dsa_switch *ds, int port, int sset)
{
struct ocelot *ocelot = ds->priv;
return ocelot_get_sset_count(ocelot, port, sset);
}
static int felix_get_ts_info(struct dsa_switch *ds, int port,
struct ethtool_ts_info *info)
{
struct ocelot *ocelot = ds->priv;
return ocelot_get_ts_info(ocelot, port, info);
}
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
static int felix_parse_ports_node(struct felix *felix,
struct device_node *ports_node,
phy_interface_t *port_phy_modes)
{
struct ocelot *ocelot = &felix->ocelot;
struct device *dev = felix->ocelot.dev;
struct device_node *child;
for_each_child_of_node(ports_node, child) {
phy_interface_t phy_mode;
u32 port;
int err;
/* Get switch port number from DT */
if (of_property_read_u32(child, "reg", &port) < 0) {
dev_err(dev, "Port number not defined in device tree "
"(property \"reg\")\n");
of_node_put(child);
return -ENODEV;
}
/* Get PHY mode from DT */
err = of_get_phy_mode(child, &phy_mode);
if (err) {
dev_err(dev, "Failed to read phy-mode or "
"phy-interface-type property for port %d\n",
port);
of_node_put(child);
return -ENODEV;
}
err = felix->info->prevalidate_phy_mode(ocelot, port, phy_mode);
if (err < 0) {
dev_err(dev, "Unsupported PHY mode %s on port %d\n",
phy_modes(phy_mode), port);
return err;
}
port_phy_modes[port] = phy_mode;
}
return 0;
}
static int felix_parse_dt(struct felix *felix, phy_interface_t *port_phy_modes)
{
struct device *dev = felix->ocelot.dev;
struct device_node *switch_node;
struct device_node *ports_node;
int err;
switch_node = dev->of_node;
ports_node = of_get_child_by_name(switch_node, "ports");
if (!ports_node) {
dev_err(dev, "Incorrect bindings: absent \"ports\" node\n");
return -ENODEV;
}
err = felix_parse_ports_node(felix, ports_node, port_phy_modes);
of_node_put(ports_node);
return err;
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
static int felix_init_structs(struct felix *felix, int num_phys_ports)
{
struct ocelot *ocelot = &felix->ocelot;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
phy_interface_t *port_phy_modes;
resource_size_t switch_base;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
int port, i, err;
ocelot->num_phys_ports = num_phys_ports;
ocelot->ports = devm_kcalloc(ocelot->dev, num_phys_ports,
sizeof(struct ocelot_port *), GFP_KERNEL);
if (!ocelot->ports)
return -ENOMEM;
ocelot->map = felix->info->map;
ocelot->stats_layout = felix->info->stats_layout;
ocelot->num_stats = felix->info->num_stats;
ocelot->shared_queue_sz = felix->info->shared_queue_sz;
ocelot->ops = felix->info->ops;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
port_phy_modes = kcalloc(num_phys_ports, sizeof(phy_interface_t),
GFP_KERNEL);
if (!port_phy_modes)
return -ENOMEM;
err = felix_parse_dt(felix, port_phy_modes);
if (err) {
kfree(port_phy_modes);
return err;
}
switch_base = pci_resource_start(felix->pdev,
felix->info->switch_pci_bar);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
for (i = 0; i < TARGET_MAX; i++) {
struct regmap *target;
struct resource *res;
if (!felix->info->target_io_res[i].name)
continue;
res = &felix->info->target_io_res[i];
res->flags = IORESOURCE_MEM;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
res->start += switch_base;
res->end += switch_base;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
target = ocelot_regmap_init(ocelot, res);
if (IS_ERR(target)) {
dev_err(ocelot->dev,
"Failed to map device memory space\n");
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
kfree(port_phy_modes);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return PTR_ERR(target);
}
ocelot->targets[i] = target;
}
err = ocelot_regfields_init(ocelot, felix->info->regfields);
if (err) {
dev_err(ocelot->dev, "failed to init reg fields map\n");
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
kfree(port_phy_modes);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return err;
}
for (port = 0; port < num_phys_ports; port++) {
struct ocelot_port *ocelot_port;
void __iomem *port_regs;
struct resource *res;
ocelot_port = devm_kzalloc(ocelot->dev,
sizeof(struct ocelot_port),
GFP_KERNEL);
if (!ocelot_port) {
dev_err(ocelot->dev,
"failed to allocate port memory\n");
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
kfree(port_phy_modes);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return -ENOMEM;
}
res = &felix->info->port_io_res[port];
res->flags = IORESOURCE_MEM;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
res->start += switch_base;
res->end += switch_base;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
port_regs = devm_ioremap_resource(ocelot->dev, res);
if (IS_ERR(port_regs)) {
dev_err(ocelot->dev,
"failed to map registers for port %d\n", port);
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
kfree(port_phy_modes);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return PTR_ERR(port_regs);
}
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
ocelot_port->phy_mode = port_phy_modes[port];
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
ocelot_port->ocelot = ocelot;
ocelot_port->regs = port_regs;
ocelot->ports[port] = ocelot_port;
}
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
kfree(port_phy_modes);
if (felix->info->mdio_bus_alloc) {
err = felix->info->mdio_bus_alloc(ocelot);
if (err < 0)
return err;
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return 0;
}
/* Hardware initialization done here so that we can allocate structures with
* devm without fear of dsa_register_switch returning -EPROBE_DEFER and causing
* us to allocate structures twice (leak memory) and map PCI memory twice
* (which will not work).
*/
static int felix_setup(struct dsa_switch *ds)
{
struct ocelot *ocelot = ds->priv;
struct felix *felix = ocelot_to_felix(ocelot);
int port, err;
err = felix_init_structs(felix, ds->num_ports);
if (err)
return err;
ocelot_init(ocelot);
for (port = 0; port < ds->num_ports; port++) {
ocelot_init_port(ocelot, port);
net: dsa: felix: Fix CPU port assignment when not last port On the NXP LS1028A, there are 2 Ethernet links between the Felix switch and the ENETC: - eno2 <-> swp4, at 2.5G - eno3 <-> swp5, at 1G Only one of the above Ethernet port pairs can act as a DSA link for tagging. When adding initial support for the driver, it was tested only on the 1G eno3 <-> swp5 interface, due to the necessity of using PHYLIB initially (which treats fixed-link interfaces as emulated C22 PHYs, so it doesn't support fixed-link speeds higher than 1G). After making PHYLINK work, it appears that swp4 still can't act as CPU port. So it looks like ocelot_set_cpu_port was being called for swp4, but then it was called again for swp5, overwriting the CPU port assigned in the DT. It appears that when you call dsa_upstream_port for a port that is not defined in the device tree (such as swp5 when using swp4 as CPU port), its dp->cpu_dp pointer is not initialized by dsa_tree_setup_default_cpu, and this trips up the following condition in dsa_upstream_port: if (!cpu_dp) return port; So the moral of the story is: don't call dsa_upstream_port for a port that is not defined in the device tree, and therefore its dsa_port structure is not completely initialized (ds->num_ports is still 6). Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19 02:16:57 +08:00
if (dsa_is_cpu_port(ds, port))
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
ocelot_set_cpu_port(ocelot, port,
OCELOT_TAG_PREFIX_NONE,
OCELOT_TAG_PREFIX_LONG);
}
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
/* It looks like the MAC/PCS interrupt register - PM0_IEVENT (0x8040)
* isn't instantiated for the Felix PF.
* In-band AN may take a few ms to complete, so we need to poll.
*/
ds->pcs_poll = true;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return 0;
}
static void felix_teardown(struct dsa_switch *ds)
{
struct ocelot *ocelot = ds->priv;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
struct felix *felix = ocelot_to_felix(ocelot);
if (felix->info->mdio_bus_free)
felix->info->mdio_bus_free(ocelot);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
/* stop workqueue thread */
ocelot_deinit(ocelot);
}
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
static int felix_hwtstamp_get(struct dsa_switch *ds, int port,
struct ifreq *ifr)
{
struct ocelot *ocelot = ds->priv;
return ocelot_hwstamp_get(ocelot, port, ifr);
}
static int felix_hwtstamp_set(struct dsa_switch *ds, int port,
struct ifreq *ifr)
{
struct ocelot *ocelot = ds->priv;
return ocelot_hwstamp_set(ocelot, port, ifr);
}
static bool felix_rxtstamp(struct dsa_switch *ds, int port,
struct sk_buff *skb, unsigned int type)
{
struct skb_shared_hwtstamps *shhwtstamps;
struct ocelot *ocelot = ds->priv;
u8 *extraction = skb->data - ETH_HLEN - OCELOT_TAG_LEN;
u32 tstamp_lo, tstamp_hi;
struct timespec64 ts;
u64 tstamp, val;
ocelot_ptp_gettime64(&ocelot->ptp_info, &ts);
tstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
packing(extraction, &val, 116, 85, OCELOT_TAG_LEN, UNPACK, 0);
tstamp_lo = (u32)val;
tstamp_hi = tstamp >> 32;
if ((tstamp & 0xffffffff) < tstamp_lo)
tstamp_hi--;
tstamp = ((u64)tstamp_hi << 32) | tstamp_lo;
shhwtstamps = skb_hwtstamps(skb);
memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
shhwtstamps->hwtstamp = tstamp;
return false;
}
net: dsa: ocelot: fix "should it be static?" warnings Fix following sparse warnings: drivers/net/dsa/ocelot/felix.c:351:6: warning: symbol 'felix_txtstamp' was not declared. Should it be static? Signed-off-by: Chen Wandun <chenwandun@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22 20:32:45 +08:00
static bool felix_txtstamp(struct dsa_switch *ds, int port,
struct sk_buff *clone, unsigned int type)
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
{
struct ocelot *ocelot = ds->priv;
struct ocelot_port *ocelot_port = ocelot->ports[port];
if (!ocelot_port_add_txtstamp_skb(ocelot_port, clone))
return true;
return false;
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
static const struct dsa_switch_ops felix_switch_ops = {
.get_tag_protocol = felix_get_tag_protocol,
.setup = felix_setup,
.teardown = felix_teardown,
.set_ageing_time = felix_set_ageing_time,
.get_strings = felix_get_strings,
.get_ethtool_stats = felix_get_ethtool_stats,
.get_sset_count = felix_get_sset_count,
.get_ts_info = felix_get_ts_info,
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
.phylink_validate = felix_phylink_validate,
.phylink_mac_link_state = felix_phylink_mac_pcs_get_state,
.phylink_mac_config = felix_phylink_mac_config,
.phylink_mac_an_restart = felix_phylink_mac_an_restart,
.phylink_mac_link_down = felix_phylink_mac_link_down,
.phylink_mac_link_up = felix_phylink_mac_link_up,
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
.port_enable = felix_port_enable,
.port_disable = felix_port_disable,
.port_fdb_dump = felix_fdb_dump,
.port_fdb_add = felix_fdb_add,
.port_fdb_del = felix_fdb_del,
.port_bridge_join = felix_bridge_join,
.port_bridge_leave = felix_bridge_leave,
.port_stp_state_set = felix_bridge_stp_state_set,
.port_vlan_prepare = felix_vlan_prepare,
.port_vlan_filtering = felix_vlan_filtering,
.port_vlan_add = felix_vlan_add,
.port_vlan_del = felix_vlan_del,
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
.port_hwtstamp_get = felix_hwtstamp_get,
.port_hwtstamp_set = felix_hwtstamp_set,
.port_rxtstamp = felix_rxtstamp,
.port_txtstamp = felix_txtstamp,
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
};
static struct felix_info *felix_instance_tbl[] = {
[FELIX_INSTANCE_VSC9959] = &felix_info_vsc9959,
};
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
static irqreturn_t felix_irq_handler(int irq, void *data)
{
struct ocelot *ocelot = (struct ocelot *)data;
/* The INTB interrupt is used for both PTP TX timestamp interrupt
* and preemption status change interrupt on each port.
*
* - Get txtstamp if have
* - TODO: handle preemption. Without handling it, driver may get
* interrupt storm.
*/
ocelot_get_txtstamp(ocelot);
return IRQ_HANDLED;
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
static int felix_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
enum felix_instance instance = id->driver_data;
struct dsa_switch *ds;
struct ocelot *ocelot;
struct felix *felix;
int err;
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "device enable failed\n");
goto err_pci_enable;
}
/* set up for high or low dma */
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (err) {
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev,
"DMA configuration failed: 0x%x\n", err);
goto err_dma;
}
}
felix = kzalloc(sizeof(struct felix), GFP_KERNEL);
if (!felix) {
err = -ENOMEM;
dev_err(&pdev->dev, "Failed to allocate driver memory\n");
goto err_alloc_felix;
}
pci_set_drvdata(pdev, felix);
ocelot = &felix->ocelot;
ocelot->dev = &pdev->dev;
felix->pdev = pdev;
felix->info = felix_instance_tbl[instance];
pci_set_master(pdev);
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
err = devm_request_threaded_irq(&pdev->dev, pdev->irq, NULL,
&felix_irq_handler, IRQF_ONESHOT,
"felix-intb", ocelot);
if (err) {
dev_err(&pdev->dev, "Failed to request irq\n");
goto err_alloc_irq;
}
ocelot->ptp = 1;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
ds = kzalloc(sizeof(struct dsa_switch), GFP_KERNEL);
if (!ds) {
err = -ENOMEM;
dev_err(&pdev->dev, "Failed to allocate DSA switch\n");
goto err_alloc_ds;
}
ds->dev = &pdev->dev;
ds->num_ports = felix->info->num_ports;
ds->ops = &felix_switch_ops;
ds->priv = ocelot;
felix->ds = ds;
err = dsa_register_switch(ds);
if (err) {
dev_err(&pdev->dev, "Failed to register DSA switch: %d\n", err);
goto err_register_ds;
}
return 0;
err_register_ds:
kfree(ds);
err_alloc_ds:
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
err_alloc_irq:
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
err_alloc_felix:
kfree(felix);
err_dma:
pci_disable_device(pdev);
err_pci_enable:
return err;
}
static void felix_pci_remove(struct pci_dev *pdev)
{
struct felix *felix;
felix = pci_get_drvdata(pdev);
dsa_unregister_switch(felix->ds);
kfree(felix->ds);
kfree(felix);
pci_disable_device(pdev);
}
static struct pci_device_id felix_ids[] = {
{
/* NXP LS1028A */
PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0xEEF0),
.driver_data = FELIX_INSTANCE_VSC9959,
},
{ 0, }
};
MODULE_DEVICE_TABLE(pci, felix_ids);
static struct pci_driver felix_pci_driver = {
.name = KBUILD_MODNAME,
.id_table = felix_ids,
.probe = felix_pci_probe,
.remove = felix_pci_remove,
};
module_pci_driver(felix_pci_driver);
MODULE_DESCRIPTION("Felix Switch driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue Copy Permalink