linux/arch/arm/boot/dts/s5pv210-goni.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Samsung's S5PV210 SoC device tree source
 *
 * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
 *
 * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
 * Tomasz Figa <t.figa@samsung.com>
 *
 * Board device tree source for Samsung Goni board.
 */

/dts-v1/;
#include <dt-bindings/input/input.h>
#include "s5pv210.dtsi"

/ {
	model = "Samsung Goni based on S5PC110";
	compatible = "samsung,goni", "samsung,s5pv210";

	aliases {
		i2c3 = &i2c_pmic;
	};

	chosen {
		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
	};

	memory@30000000 {
		device_type = "memory";
		reg = <0x30000000 0x05000000
			0x40000000 0x10000000
			0x50000000 0x08000000>;
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		vtf_reg: fixed-regulator@0 {
			compatible = "regulator-fixed";
			regulator-name = "V_TF_2.8V";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			reg = <0>;
			gpio = <&mp05 4 0>;
			enable-active-high;
		};

		pda_reg: fixed-regulator@1 {
			compatible = "regulator-fixed";
			regulator-name = "VCC_1.8V_PDA";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			reg = <1>;
		};

		bat_reg: fixed-regulator@2 {
			compatible = "regulator-fixed";
			regulator-name = "V_BAT";
			regulator-min-microvolt = <3700000>;
			regulator-max-microvolt = <3700000>;
			reg = <2>;
		};

		tsp_reg: fixed-regulator@3 {
			compatible = "regulator-fixed";
			regulator-name = "TSP_VDD";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			reg = <3>;
			gpio = <&gpj1 3 0>;
			enable-active-high;
		};
	};

	i2c_pmic: i2c-pmic {
		compatible = "i2c-gpio";
		gpios = <&gpj4 0 0>, /* sda */
			<&gpj4 3 0>; /* scl */
		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
		#address-cells = <1>;
		#size-cells = <0>;

		pmic@66 {
			compatible = "national,lp3974";
			reg = <0x66>;

			max8998,pmic-buck1-default-dvs-idx = <0>;
			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
							<&gph0 4 0>;
			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
							<1200000>, <1200000>;

			max8998,pmic-buck2-default-dvs-idx = <0>;
			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;

			regulators {
				ldo2_reg: LDO2 {
					regulator-name = "VALIVE_1.1V";
					regulator-min-microvolt = <1100000>;
					regulator-max-microvolt = <1100000>;
					regulator-always-on;
				};

				ldo3_reg: LDO3 {
					regulator-name = "VUSB+MIPI_1.1V";
					regulator-min-microvolt = <1100000>;
					regulator-max-microvolt = <1100000>;
					regulator-always-on;
				};

				ldo4_reg: LDO4 {
					regulator-name = "VADC_3.3V";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo5_reg: LDO5 {
					regulator-name = "VTF_2.8V";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo6_reg: LDO6 {
					regulator-name = "VCC_3.3V";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo7_reg: LDO7 {
					regulator-name = "VLCD_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				ldo8_reg: LDO8 {
					regulator-name = "VUSB+VDAC_3.3V";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo9_reg: LDO9 {
					regulator-name = "VCC+VCAM_2.8V";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo10_reg: LDO10 {
					regulator-name = "VPLL_1.1V";
					regulator-min-microvolt = <1100000>;
					regulator-max-microvolt = <1100000>;
					regulator-boot-on;
				};

				ldo11_reg: LDO11 {
					regulator-name = "CAM_IO_2.8V";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo12_reg: LDO12 {
					regulator-name = "CAM_ISP_1.2V";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				ldo13_reg: LDO13 {
					regulator-name = "CAM_A_2.8V";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo14_reg: LDO14 {
					regulator-name = "CAM_CIF_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				ldo15_reg: LDO15 {
					regulator-name = "CAM_AF_3.3V";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo16_reg: LDO16 {
					regulator-name = "VMIPI_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				ldo17_reg: LDO17 {
					regulator-name = "CAM_8M_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				buck1_reg: BUCK1 {
					regulator-name = "VARM_1.2V";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				buck2_reg: BUCK2 {
					regulator-name = "VINT_1.2V";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				buck3_reg: BUCK3 {
					regulator-name = "VCC_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				buck4_reg: BUCK4 {
					regulator-name = "CAM_CORE_1.2V";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					regulator-always-on;
				};
			};
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		power-key {
			gpios = <&gph2 6 1>;
			linux,code = <KEY_POWER>;
			label = "power";
			debounce-interval = <1>;
			wakeup-source;
		};
	};
};

&xusbxti {
	clock-frequency = <24000000>;
};

&keypad {
	linux,input-no-autorepeat;
	wakeup-source;
	samsung,keypad-num-rows = <3>;
	samsung,keypad-num-columns = <3>;
	pinctrl-names = "default";
	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
	status = "okay";

	key_1 {
		keypad,row = <0>;
		keypad,column = <1>;
		linux,code = <KEY_CONNECT>;
	};

	key_2 {
		keypad,row = <0>;
		keypad,column = <2>;
		linux,code = <KEY_BACK>;
	};

	key_3 {
		keypad,row = <1>;
		keypad,column = <1>;
		linux,code = <KEY_CAMERA_FOCUS>;
	};

	key_4 {
		keypad,row = <1>;
		keypad,column = <2>;
		linux,code = <KEY_VOLUMEUP>;
	};

	key_5 {
		keypad,row = <2>;
		keypad,column = <1>;
		linux,code = <KEY_CAMERA>;
	};

	key_6 {
		keypad,row = <2>;
		keypad,column = <2>;
		linux,code = <KEY_VOLUMEDOWN>;
	};
};

&uart0 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&sdhci0 {
	bus-width = <4>;
	non-removable;
	vmmc-supply = <&ldo5_reg>;
	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
	pinctrl-names = "default";
	status = "okay";
};

&sdhci2 {
	bus-width = <4>;
	cd-gpios = <&gph3 4 1>;
	vmmc-supply = <&vtf_reg>;
	cd-inverted;
	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
	pinctrl-names = "default";
	status = "okay";
};

&hsotg {
	vusb_a-supply = <&ldo3_reg>;
	vusb_d-supply = <&ldo8_reg>;
	dr_mode = "peripheral";
	status = "okay";
};

&usbphy {
	status = "okay";
};

&i2c2 {
	samsung,i2c-sda-delay = <100>;
	samsung,i2c-max-bus-freq = <400000>;
	samsung,i2c-slave-addr = <0x10>;
	status = "okay";

	tsp@4a {
		compatible = "atmel,maxtouch";
		reg = <0x4a>;
		interrupt-parent = <&gpj0>;
		interrupts = <5 2>;

		atmel,x-line = <17>;
		atmel,y-line = <11>;
		atmel,x-size = <800>;
		atmel,y-size = <480>;
		atmel,burst-length = <0x21>;
		atmel,threshold = <0x28>;
		atmel,orientation = <1>;

		vdd-supply = <&tsp_reg>;
	};
};

&i2c0 {
	samsung,i2c-sda-delay = <100>;
	samsung,i2c-max-bus-freq = <100000>;
	samsung,i2c-slave-addr = <0x10>;
	status = "okay";

	noon010pc30: sensor@30 {
		compatible = "siliconfile,noon010pc30";
		reg = <0x30>;
		vddio-supply = <&ldo11_reg>;
		vdda-supply = <&ldo13_reg>;
		vdd_core-supply = <&ldo14_reg>;

		clock-frequency = <16000000>;
		clocks = <&clock_cam 0>;
		clock-names = "mclk";
		nreset-gpios = <&gpb 2 0>;
		nstby-gpios = <&gpb 0 0>;

		port {
			noon010pc30_ep: endpoint {
				remote-endpoint = <&fimc0_ep>;
				bus-width = <8>;
				hsync-active = <0>;
				vsync-active = <1>;
				pclk-sample = <1>;
			};
		};
	};
};

&camera {
	pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
	pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
	pinctrl-names = "default", "idle";

	parallel-ports {
		#address-cells = <1>;
		#size-cells = <0>;

		/* camera A input */
		port@1 {
			reg = <1>;
			fimc0_ep: endpoint {
				remote-endpoint = <&noon010pc30_ep>;
				bus-width = <8>;
				hsync-active = <1>;
				vsync-active = <1>;
				pclk-sample = <0>;
			};
		};
	};
};

&fimd {
	pinctrl-0 = <&lcd_clk &lcd_data24>;
	pinctrl-names = "default";
	status = "okay";

	display-timings {
		native-mode = <&timing0>;
		timing0: timing {
			/* 480x800@55Hz */
			clock-frequency = <23439570>;
			hactive = <480>;
			hfront-porch = <16>;
			hback-porch = <16>;
			hsync-len = <2>;
			vactive = <800>;
			vback-porch = <2>;
			vfront-porch = <28>;
			vsync-len = <1>;
			hsync-active = <0>;
			vsync-active = <0>;
			de-active = <0>;
			pixelclk-active = <0>;
		};
	};
};

&onenand {
	status = "okay";
};