linux/arch/arm64/mm/flush.c

103 lines
2.6 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Based on arch/arm/mm/flush.c
*
* Copyright (C) 1995-2002 Russell King
* Copyright (C) 2012 ARM Ltd.
*/
#include <linux/export.h>
#include <linux/mm.h>
#include <linux/libnvdimm.h>
#include <linux/pagemap.h>
#include <asm/cacheflush.h>
#include <asm/cache.h>
#include <asm/tlbflush.h>
void sync_icache_aliases(unsigned long start, unsigned long end)
{
if (icache_is_aliasing()) {
arm64: Rename arm64-internal cache maintenance functions Although naming across the codebase isn't that consistent, it tends to follow certain patterns. Moreover, the term "flush" isn't defined in the Arm Architecture reference manual, and might be interpreted to mean clean, invalidate, or both for a cache. Rename arm64-internal functions to make the naming internally consistent, as well as making it consistent with the Arm ARM, by specifying whether it applies to the instruction, data, or both caches, whether the operation is a clean, invalidate, or both. Also specify which point the operation applies to, i.e., to the point of unification (PoU), coherency (PoC), or persistence (PoP). This commit applies the following sed transformation to all files under arch/arm64: "s/\b__flush_cache_range\b/caches_clean_inval_pou_macro/g;"\ "s/\b__flush_icache_range\b/caches_clean_inval_pou/g;"\ "s/\binvalidate_icache_range\b/icache_inval_pou/g;"\ "s/\b__flush_dcache_area\b/dcache_clean_inval_poc/g;"\ "s/\b__inval_dcache_area\b/dcache_inval_poc/g;"\ "s/__clean_dcache_area_poc\b/dcache_clean_poc/g;"\ "s/\b__clean_dcache_area_pop\b/dcache_clean_pop/g;"\ "s/\b__clean_dcache_area_pou\b/dcache_clean_pou/g;"\ "s/\b__flush_cache_user_range\b/caches_clean_inval_user_pou/g;"\ "s/\b__flush_icache_all\b/icache_inval_all_pou/g;" Note that __clean_dcache_area_poc is deliberately missing a word boundary check at the beginning in order to match the efistub symbols in image-vars.h. Also note that, despite its name, __flush_icache_range operates on both instruction and data caches. The name change here reflects that. No functional change intended. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20210524083001.2586635-19-tabba@google.com Signed-off-by: Will Deacon <will@kernel.org>
2021-05-24 16:30:01 +08:00
dcache_clean_pou(start, end);
icache_inval_all_pou();
} else {
/*
* Don't issue kick_all_cpus_sync() after I-cache invalidation
* for user mappings.
*/
arm64: Rename arm64-internal cache maintenance functions Although naming across the codebase isn't that consistent, it tends to follow certain patterns. Moreover, the term "flush" isn't defined in the Arm Architecture reference manual, and might be interpreted to mean clean, invalidate, or both for a cache. Rename arm64-internal functions to make the naming internally consistent, as well as making it consistent with the Arm ARM, by specifying whether it applies to the instruction, data, or both caches, whether the operation is a clean, invalidate, or both. Also specify which point the operation applies to, i.e., to the point of unification (PoU), coherency (PoC), or persistence (PoP). This commit applies the following sed transformation to all files under arch/arm64: "s/\b__flush_cache_range\b/caches_clean_inval_pou_macro/g;"\ "s/\b__flush_icache_range\b/caches_clean_inval_pou/g;"\ "s/\binvalidate_icache_range\b/icache_inval_pou/g;"\ "s/\b__flush_dcache_area\b/dcache_clean_inval_poc/g;"\ "s/\b__inval_dcache_area\b/dcache_inval_poc/g;"\ "s/__clean_dcache_area_poc\b/dcache_clean_poc/g;"\ "s/\b__clean_dcache_area_pop\b/dcache_clean_pop/g;"\ "s/\b__clean_dcache_area_pou\b/dcache_clean_pou/g;"\ "s/\b__flush_cache_user_range\b/caches_clean_inval_user_pou/g;"\ "s/\b__flush_icache_all\b/icache_inval_all_pou/g;" Note that __clean_dcache_area_poc is deliberately missing a word boundary check at the beginning in order to match the efistub symbols in image-vars.h. Also note that, despite its name, __flush_icache_range operates on both instruction and data caches. The name change here reflects that. No functional change intended. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20210524083001.2586635-19-tabba@google.com Signed-off-by: Will Deacon <will@kernel.org>
2021-05-24 16:30:01 +08:00
caches_clean_inval_pou(start, end);
}
}
static void flush_ptrace_access(struct vm_area_struct *vma, unsigned long start,
unsigned long end)
{
if (vma->vm_flags & VM_EXEC)
sync_icache_aliases(start, end);
}
/*
* Copy user data from/to a page which is mapped into a different processes
* address space. Really, we want to allow our "user space" model to handle
* this.
*/
void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
unsigned long uaddr, void *dst, const void *src,
unsigned long len)
{
memcpy(dst, src, len);
flush_ptrace_access(vma, (unsigned long)dst, (unsigned long)dst + len);
}
void __sync_icache_dcache(pte_t pte)
{
struct folio *folio = page_folio(pte_page(pte));
if (!test_bit(PG_dcache_clean, &folio->flags)) {
sync_icache_aliases((unsigned long)folio_address(folio),
(unsigned long)folio_address(folio) +
folio_size(folio));
set_bit(PG_dcache_clean, &folio->flags);
}
}
EXPORT_SYMBOL_GPL(__sync_icache_dcache);
/*
* This function is called when a page has been modified by the kernel. Mark
* it as dirty for later flushing when mapped in user space (if executable,
* see __sync_icache_dcache).
*/
void flush_dcache_folio(struct folio *folio)
{
if (test_bit(PG_dcache_clean, &folio->flags))
clear_bit(PG_dcache_clean, &folio->flags);
}
EXPORT_SYMBOL(flush_dcache_folio);
arm64: mm: hugetlb: enable HUGETLB_PAGE_FREE_VMEMMAP for arm64 The feature of minimizing overhead of struct page associated with each HugeTLB page aims to free its vmemmap pages (used as struct page) to save memory, where is ~14GB/16GB per 1TB HugeTLB pages (2MB/1GB type). In short, when a HugeTLB page is allocated or freed, the vmemmap array representing the range associated with the page will need to be remapped. When a page is allocated, vmemmap pages are freed after remapping. When a page is freed, previously discarded vmemmap pages must be allocated before remapping. More implementations and details can be found here [1]. The infrastructure of freeing vmemmap pages associated with each HugeTLB page is already there, we can easily enable HUGETLB_PAGE_FREE_VMEMMAP for arm64, the only thing to be fixed is flush_dcache_page() . flush_dcache_page() need to be adapted to operate on the head page's flags since the tail vmemmap pages are mapped with read-only after the feature is enabled (clear operation is not permitted). There was some discussions about this in the thread [2], but there was no conclusion in the end. And I copied the concern proposed by Anshuman to here and explain why those concern is superfluous. It is safe to enable it for x86_64 as well as arm64. 1st concern: ''' But what happens when a hot remove section's vmemmap area (which is being teared down) is nearby another vmemmap area which is either created or being destroyed for HugeTLB alloc/free purpose. As you mentioned HugeTLB pages inside the hot remove section might be safe. But what about other HugeTLB areas whose vmemmap area shares page table entries with vmemmap entries for a section being hot removed ? Massive HugeTLB alloc /use/free test cycle using memory just adjacent to a memory hotplug area, which is always added and removed periodically, should be able to expose this problem. ''' Answer: At the time memory is removed, all HugeTLB pages either have been migrated away or dissolved. So there is no race between memory hot remove and free_huge_page_vmemmap(). Therefore, HugeTLB pages inside the hot remove section is safe. Let's talk your question "what about other HugeTLB areas whose vmemmap area shares page table entries with vmemmap entries for a section being hot removed ?", the question is not established. The minimal granularity size of hotplug memory 128MB (on arm64, 4k base page), any HugeTLB smaller than 128MB is within a section, then, there is no share PTE page tables between HugeTLB in this section and ones in other sections and a HugeTLB page could not cross two sections. In this case, the section cannot be freed. Any HugeTLB bigger than 128MB (section size) whose vmemmap pages is an integer multiple of 2MB (PMD-mapped). As long as: 1) HugeTLBs are naturally aligned, power-of-two sizes 2) The HugeTLB size >= the section size 3) The HugeTLB size >= the vmemmap leaf mapping size Then a HugeTLB will not share any leaf page table entries with *anything else*, but will share intermediate entries. In this case, at the time memory is removed, all HugeTLB pages either have been migrated away or dissolved. So there is also no race between memory hot remove and free_huge_page_vmemmap(). 2nd concern: ''' differently, not sure if ptdump would require any synchronization. Dumping an wrong value is probably okay but crashing because a page table entry is being freed after ptdump acquired the pointer is bad. On arm64, ptdump() is protected against hotremove via [get|put]_online_mems(). ''' Answer: The ptdump should be fine since vmemmap_remap_free() only exchanges PTEs or splits the PMD entry (which means allocating a PTE page table). Both operations do not free any page tables (PTE), so ptdump cannot run into a UAF on any page tables. The worst case is just dumping an wrong value. [1] https://lore.kernel.org/all/20210510030027.56044-1-songmuchun@bytedance.com/ [2] https://lore.kernel.org/all/20210518091826.36937-1-songmuchun@bytedance.com/ [songmuchun@bytedance.com: restructure the code comment inside flush_dcache_page()] Link: https://lkml.kernel.org/r/20220414072646.21910-1-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20220331065640.5777-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Barry Song <baohua@kernel.org> Tested-by: Barry Song <baohua@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Bodeddula Balasubramaniam <bodeddub@amazon.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 14:16:03 +08:00
void flush_dcache_page(struct page *page)
{
flush_dcache_folio(page_folio(page));
}
EXPORT_SYMBOL(flush_dcache_page);
/*
* Additional functions defined in assembly.
*/
arm64: Rename arm64-internal cache maintenance functions Although naming across the codebase isn't that consistent, it tends to follow certain patterns. Moreover, the term "flush" isn't defined in the Arm Architecture reference manual, and might be interpreted to mean clean, invalidate, or both for a cache. Rename arm64-internal functions to make the naming internally consistent, as well as making it consistent with the Arm ARM, by specifying whether it applies to the instruction, data, or both caches, whether the operation is a clean, invalidate, or both. Also specify which point the operation applies to, i.e., to the point of unification (PoU), coherency (PoC), or persistence (PoP). This commit applies the following sed transformation to all files under arch/arm64: "s/\b__flush_cache_range\b/caches_clean_inval_pou_macro/g;"\ "s/\b__flush_icache_range\b/caches_clean_inval_pou/g;"\ "s/\binvalidate_icache_range\b/icache_inval_pou/g;"\ "s/\b__flush_dcache_area\b/dcache_clean_inval_poc/g;"\ "s/\b__inval_dcache_area\b/dcache_inval_poc/g;"\ "s/__clean_dcache_area_poc\b/dcache_clean_poc/g;"\ "s/\b__clean_dcache_area_pop\b/dcache_clean_pop/g;"\ "s/\b__clean_dcache_area_pou\b/dcache_clean_pou/g;"\ "s/\b__flush_cache_user_range\b/caches_clean_inval_user_pou/g;"\ "s/\b__flush_icache_all\b/icache_inval_all_pou/g;" Note that __clean_dcache_area_poc is deliberately missing a word boundary check at the beginning in order to match the efistub symbols in image-vars.h. Also note that, despite its name, __flush_icache_range operates on both instruction and data caches. The name change here reflects that. No functional change intended. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20210524083001.2586635-19-tabba@google.com Signed-off-by: Will Deacon <will@kernel.org>
2021-05-24 16:30:01 +08:00
EXPORT_SYMBOL(caches_clean_inval_pou);
#ifdef CONFIG_ARCH_HAS_PMEM_API
void arch_wb_cache_pmem(void *addr, size_t size)
{
/* Ensure order against any prior non-cacheable writes */
dmb(osh);
arm64: Rename arm64-internal cache maintenance functions Although naming across the codebase isn't that consistent, it tends to follow certain patterns. Moreover, the term "flush" isn't defined in the Arm Architecture reference manual, and might be interpreted to mean clean, invalidate, or both for a cache. Rename arm64-internal functions to make the naming internally consistent, as well as making it consistent with the Arm ARM, by specifying whether it applies to the instruction, data, or both caches, whether the operation is a clean, invalidate, or both. Also specify which point the operation applies to, i.e., to the point of unification (PoU), coherency (PoC), or persistence (PoP). This commit applies the following sed transformation to all files under arch/arm64: "s/\b__flush_cache_range\b/caches_clean_inval_pou_macro/g;"\ "s/\b__flush_icache_range\b/caches_clean_inval_pou/g;"\ "s/\binvalidate_icache_range\b/icache_inval_pou/g;"\ "s/\b__flush_dcache_area\b/dcache_clean_inval_poc/g;"\ "s/\b__inval_dcache_area\b/dcache_inval_poc/g;"\ "s/__clean_dcache_area_poc\b/dcache_clean_poc/g;"\ "s/\b__clean_dcache_area_pop\b/dcache_clean_pop/g;"\ "s/\b__clean_dcache_area_pou\b/dcache_clean_pou/g;"\ "s/\b__flush_cache_user_range\b/caches_clean_inval_user_pou/g;"\ "s/\b__flush_icache_all\b/icache_inval_all_pou/g;" Note that __clean_dcache_area_poc is deliberately missing a word boundary check at the beginning in order to match the efistub symbols in image-vars.h. Also note that, despite its name, __flush_icache_range operates on both instruction and data caches. The name change here reflects that. No functional change intended. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20210524083001.2586635-19-tabba@google.com Signed-off-by: Will Deacon <will@kernel.org>
2021-05-24 16:30:01 +08:00
dcache_clean_pop((unsigned long)addr, (unsigned long)addr + size);
}
EXPORT_SYMBOL_GPL(arch_wb_cache_pmem);
void arch_invalidate_pmem(void *addr, size_t size)
{
arm64: Rename arm64-internal cache maintenance functions Although naming across the codebase isn't that consistent, it tends to follow certain patterns. Moreover, the term "flush" isn't defined in the Arm Architecture reference manual, and might be interpreted to mean clean, invalidate, or both for a cache. Rename arm64-internal functions to make the naming internally consistent, as well as making it consistent with the Arm ARM, by specifying whether it applies to the instruction, data, or both caches, whether the operation is a clean, invalidate, or both. Also specify which point the operation applies to, i.e., to the point of unification (PoU), coherency (PoC), or persistence (PoP). This commit applies the following sed transformation to all files under arch/arm64: "s/\b__flush_cache_range\b/caches_clean_inval_pou_macro/g;"\ "s/\b__flush_icache_range\b/caches_clean_inval_pou/g;"\ "s/\binvalidate_icache_range\b/icache_inval_pou/g;"\ "s/\b__flush_dcache_area\b/dcache_clean_inval_poc/g;"\ "s/\b__inval_dcache_area\b/dcache_inval_poc/g;"\ "s/__clean_dcache_area_poc\b/dcache_clean_poc/g;"\ "s/\b__clean_dcache_area_pop\b/dcache_clean_pop/g;"\ "s/\b__clean_dcache_area_pou\b/dcache_clean_pou/g;"\ "s/\b__flush_cache_user_range\b/caches_clean_inval_user_pou/g;"\ "s/\b__flush_icache_all\b/icache_inval_all_pou/g;" Note that __clean_dcache_area_poc is deliberately missing a word boundary check at the beginning in order to match the efistub symbols in image-vars.h. Also note that, despite its name, __flush_icache_range operates on both instruction and data caches. The name change here reflects that. No functional change intended. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20210524083001.2586635-19-tabba@google.com Signed-off-by: Will Deacon <will@kernel.org>
2021-05-24 16:30:01 +08:00
dcache_inval_poc((unsigned long)addr, (unsigned long)addr + size);
}
EXPORT_SYMBOL_GPL(arch_invalidate_pmem);
#endif