linux/drivers/infiniband/ulp/ipoib/ipoib_ib.c

1273 lines
32 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
* Copyright (c) 2004, 2005 Voltaire, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include "ipoib.h"
#ifdef CONFIG_INFINIBAND_IPOIB_DEBUG_DATA
static int data_debug_level;
module_param(data_debug_level, int, 0644);
MODULE_PARM_DESC(data_debug_level,
"Enable data path debug tracing if > 0");
#endif
struct ipoib_ah *ipoib_create_ah(struct net_device *dev,
struct ib_pd *pd, struct rdma_ah_attr *attr)
{
struct ipoib_ah *ah;
IB/ipoib: Prevent hung task or softlockup processing multicast response This following can occur with ipoib when processing a multicast reponse: BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982] Modules linked in: ... CPU 0: Modules linked in: ... Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5 RIP: 0010:[<ffffffff814ddb27>] [<ffffffff814ddb27>] _spin_unlock_irqrestore+0x17/0x20 RSP: 0018:ffff8802119ed860 EFLAGS: 00000246 0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299 RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000 R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860 R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffa032c247>] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib] [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffffa03283d4>] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib] [<ffffffffa03286fc>] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib] [<ffffffff8141e758>] ? dev_hard_start_xmit+0x2c8/0x3f0 [<ffffffff81439d0a>] ? sch_direct_xmit+0x15a/0x1c0 [<ffffffff81423098>] ? dev_queue_xmit+0x388/0x4d0 [<ffffffffa032d6b7>] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib] [<ffffffffa032dab8>] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib] [<ffffffffa02a0946>] ? mcast_work_handler+0x1a6/0x710 [ib_sa] [<ffffffffa015f01e>] ? ib_send_mad+0xfe/0x3c0 [ib_mad] [<ffffffffa00f6c93>] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core] [<ffffffffa02a0f9b>] ? join_handler+0xeb/0x200 [ib_sa] [<ffffffffa029e4fc>] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa] [<ffffffffa029e79c>] ? recv_handler+0x3c/0x70 [ib_sa] [<ffffffffa01603a4>] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad] [<ffffffffa015fb60>] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad] [<ffffffff81088830>] ? worker_thread+0x170/0x2a0 [<ffffffff8108e160>] ? autoremove_wake_function+0x0/0x40 [<ffffffff810886c0>] ? worker_thread+0x0/0x2a0 [<ffffffff8108ddf6>] ? kthread+0x96/0xa0 [<ffffffff8100c1ca>] ? child_rip+0xa/0x20 Coinciding with stack trace is the following message: ib0: ib_address_create failed The code below in ipoib_mcast_join_finish() will note the above failure in the address handle but otherwise continue: ah = ipoib_create_ah(dev, priv->pd, &av); if (!ah) { ipoib_warn(priv, "ib_address_create failed\n"); } else { The while loop at the bottom of ipoib_mcast_join_finish() will attempt to send queued multicast packets in mcast->pkt_queue and eventually end up in ipoib_mcast_send(): if (!mcast->ah) { if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE) skb_queue_tail(&mcast->pkt_queue, skb); else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } My read is that the code will requeue the packet and return to the ipoib_mcast_join_finish() while loop and the stage is set for the "hung" task diagnostic as the while loop never sees a non-NULL ah, and will do nothing to resolve. There are GFP_ATOMIC allocates in the provider routines, so this is possible and should be dealt with. The test that induced the failure is associated with a host SM on the same server during a shutdown. This patch causes ipoib_mcast_join_finish() to exit with an error which will flush the queued mcast packets. Nothing is done to unwind the QP attached state so that subsequent sends from above will retry the join. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Reviewed-by: Gary Leshner <gary.leshner@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-21 21:43:54 +08:00
struct ib_ah *vah;
ah = kmalloc(sizeof *ah, GFP_KERNEL);
if (!ah)
IB/ipoib: Prevent hung task or softlockup processing multicast response This following can occur with ipoib when processing a multicast reponse: BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982] Modules linked in: ... CPU 0: Modules linked in: ... Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5 RIP: 0010:[<ffffffff814ddb27>] [<ffffffff814ddb27>] _spin_unlock_irqrestore+0x17/0x20 RSP: 0018:ffff8802119ed860 EFLAGS: 00000246 0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299 RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000 R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860 R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffa032c247>] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib] [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffffa03283d4>] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib] [<ffffffffa03286fc>] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib] [<ffffffff8141e758>] ? dev_hard_start_xmit+0x2c8/0x3f0 [<ffffffff81439d0a>] ? sch_direct_xmit+0x15a/0x1c0 [<ffffffff81423098>] ? dev_queue_xmit+0x388/0x4d0 [<ffffffffa032d6b7>] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib] [<ffffffffa032dab8>] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib] [<ffffffffa02a0946>] ? mcast_work_handler+0x1a6/0x710 [ib_sa] [<ffffffffa015f01e>] ? ib_send_mad+0xfe/0x3c0 [ib_mad] [<ffffffffa00f6c93>] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core] [<ffffffffa02a0f9b>] ? join_handler+0xeb/0x200 [ib_sa] [<ffffffffa029e4fc>] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa] [<ffffffffa029e79c>] ? recv_handler+0x3c/0x70 [ib_sa] [<ffffffffa01603a4>] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad] [<ffffffffa015fb60>] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad] [<ffffffff81088830>] ? worker_thread+0x170/0x2a0 [<ffffffff8108e160>] ? autoremove_wake_function+0x0/0x40 [<ffffffff810886c0>] ? worker_thread+0x0/0x2a0 [<ffffffff8108ddf6>] ? kthread+0x96/0xa0 [<ffffffff8100c1ca>] ? child_rip+0xa/0x20 Coinciding with stack trace is the following message: ib0: ib_address_create failed The code below in ipoib_mcast_join_finish() will note the above failure in the address handle but otherwise continue: ah = ipoib_create_ah(dev, priv->pd, &av); if (!ah) { ipoib_warn(priv, "ib_address_create failed\n"); } else { The while loop at the bottom of ipoib_mcast_join_finish() will attempt to send queued multicast packets in mcast->pkt_queue and eventually end up in ipoib_mcast_send(): if (!mcast->ah) { if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE) skb_queue_tail(&mcast->pkt_queue, skb); else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } My read is that the code will requeue the packet and return to the ipoib_mcast_join_finish() while loop and the stage is set for the "hung" task diagnostic as the while loop never sees a non-NULL ah, and will do nothing to resolve. There are GFP_ATOMIC allocates in the provider routines, so this is possible and should be dealt with. The test that induced the failure is associated with a host SM on the same server during a shutdown. This patch causes ipoib_mcast_join_finish() to exit with an error which will flush the queued mcast packets. Nothing is done to unwind the QP attached state so that subsequent sends from above will retry the join. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Reviewed-by: Gary Leshner <gary.leshner@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-21 21:43:54 +08:00
return ERR_PTR(-ENOMEM);
ah->dev = dev;
ah->last_send = 0;
kref_init(&ah->ref);
vah = rdma_create_ah(pd, attr);
IB/ipoib: Prevent hung task or softlockup processing multicast response This following can occur with ipoib when processing a multicast reponse: BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982] Modules linked in: ... CPU 0: Modules linked in: ... Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5 RIP: 0010:[<ffffffff814ddb27>] [<ffffffff814ddb27>] _spin_unlock_irqrestore+0x17/0x20 RSP: 0018:ffff8802119ed860 EFLAGS: 00000246 0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299 RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000 R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860 R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffa032c247>] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib] [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffffa03283d4>] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib] [<ffffffffa03286fc>] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib] [<ffffffff8141e758>] ? dev_hard_start_xmit+0x2c8/0x3f0 [<ffffffff81439d0a>] ? sch_direct_xmit+0x15a/0x1c0 [<ffffffff81423098>] ? dev_queue_xmit+0x388/0x4d0 [<ffffffffa032d6b7>] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib] [<ffffffffa032dab8>] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib] [<ffffffffa02a0946>] ? mcast_work_handler+0x1a6/0x710 [ib_sa] [<ffffffffa015f01e>] ? ib_send_mad+0xfe/0x3c0 [ib_mad] [<ffffffffa00f6c93>] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core] [<ffffffffa02a0f9b>] ? join_handler+0xeb/0x200 [ib_sa] [<ffffffffa029e4fc>] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa] [<ffffffffa029e79c>] ? recv_handler+0x3c/0x70 [ib_sa] [<ffffffffa01603a4>] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad] [<ffffffffa015fb60>] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad] [<ffffffff81088830>] ? worker_thread+0x170/0x2a0 [<ffffffff8108e160>] ? autoremove_wake_function+0x0/0x40 [<ffffffff810886c0>] ? worker_thread+0x0/0x2a0 [<ffffffff8108ddf6>] ? kthread+0x96/0xa0 [<ffffffff8100c1ca>] ? child_rip+0xa/0x20 Coinciding with stack trace is the following message: ib0: ib_address_create failed The code below in ipoib_mcast_join_finish() will note the above failure in the address handle but otherwise continue: ah = ipoib_create_ah(dev, priv->pd, &av); if (!ah) { ipoib_warn(priv, "ib_address_create failed\n"); } else { The while loop at the bottom of ipoib_mcast_join_finish() will attempt to send queued multicast packets in mcast->pkt_queue and eventually end up in ipoib_mcast_send(): if (!mcast->ah) { if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE) skb_queue_tail(&mcast->pkt_queue, skb); else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } My read is that the code will requeue the packet and return to the ipoib_mcast_join_finish() while loop and the stage is set for the "hung" task diagnostic as the while loop never sees a non-NULL ah, and will do nothing to resolve. There are GFP_ATOMIC allocates in the provider routines, so this is possible and should be dealt with. The test that induced the failure is associated with a host SM on the same server during a shutdown. This patch causes ipoib_mcast_join_finish() to exit with an error which will flush the queued mcast packets. Nothing is done to unwind the QP attached state so that subsequent sends from above will retry the join. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Reviewed-by: Gary Leshner <gary.leshner@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-21 21:43:54 +08:00
if (IS_ERR(vah)) {
kfree(ah);
IB/ipoib: Prevent hung task or softlockup processing multicast response This following can occur with ipoib when processing a multicast reponse: BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982] Modules linked in: ... CPU 0: Modules linked in: ... Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5 RIP: 0010:[<ffffffff814ddb27>] [<ffffffff814ddb27>] _spin_unlock_irqrestore+0x17/0x20 RSP: 0018:ffff8802119ed860 EFLAGS: 00000246 0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299 RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000 R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860 R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffa032c247>] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib] [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffffa03283d4>] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib] [<ffffffffa03286fc>] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib] [<ffffffff8141e758>] ? dev_hard_start_xmit+0x2c8/0x3f0 [<ffffffff81439d0a>] ? sch_direct_xmit+0x15a/0x1c0 [<ffffffff81423098>] ? dev_queue_xmit+0x388/0x4d0 [<ffffffffa032d6b7>] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib] [<ffffffffa032dab8>] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib] [<ffffffffa02a0946>] ? mcast_work_handler+0x1a6/0x710 [ib_sa] [<ffffffffa015f01e>] ? ib_send_mad+0xfe/0x3c0 [ib_mad] [<ffffffffa00f6c93>] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core] [<ffffffffa02a0f9b>] ? join_handler+0xeb/0x200 [ib_sa] [<ffffffffa029e4fc>] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa] [<ffffffffa029e79c>] ? recv_handler+0x3c/0x70 [ib_sa] [<ffffffffa01603a4>] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad] [<ffffffffa015fb60>] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad] [<ffffffff81088830>] ? worker_thread+0x170/0x2a0 [<ffffffff8108e160>] ? autoremove_wake_function+0x0/0x40 [<ffffffff810886c0>] ? worker_thread+0x0/0x2a0 [<ffffffff8108ddf6>] ? kthread+0x96/0xa0 [<ffffffff8100c1ca>] ? child_rip+0xa/0x20 Coinciding with stack trace is the following message: ib0: ib_address_create failed The code below in ipoib_mcast_join_finish() will note the above failure in the address handle but otherwise continue: ah = ipoib_create_ah(dev, priv->pd, &av); if (!ah) { ipoib_warn(priv, "ib_address_create failed\n"); } else { The while loop at the bottom of ipoib_mcast_join_finish() will attempt to send queued multicast packets in mcast->pkt_queue and eventually end up in ipoib_mcast_send(): if (!mcast->ah) { if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE) skb_queue_tail(&mcast->pkt_queue, skb); else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } My read is that the code will requeue the packet and return to the ipoib_mcast_join_finish() while loop and the stage is set for the "hung" task diagnostic as the while loop never sees a non-NULL ah, and will do nothing to resolve. There are GFP_ATOMIC allocates in the provider routines, so this is possible and should be dealt with. The test that induced the failure is associated with a host SM on the same server during a shutdown. This patch causes ipoib_mcast_join_finish() to exit with an error which will flush the queued mcast packets. Nothing is done to unwind the QP attached state so that subsequent sends from above will retry the join. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Reviewed-by: Gary Leshner <gary.leshner@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-21 21:43:54 +08:00
ah = (struct ipoib_ah *)vah;
} else {
ah->ah = vah;
ipoib_dbg(ipoib_priv(dev), "Created ah %p\n", ah->ah);
IB/ipoib: Prevent hung task or softlockup processing multicast response This following can occur with ipoib when processing a multicast reponse: BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982] Modules linked in: ... CPU 0: Modules linked in: ... Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5 RIP: 0010:[<ffffffff814ddb27>] [<ffffffff814ddb27>] _spin_unlock_irqrestore+0x17/0x20 RSP: 0018:ffff8802119ed860 EFLAGS: 00000246 0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299 RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000 R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860 R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffa032c247>] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib] [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffffa03283d4>] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib] [<ffffffffa03286fc>] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib] [<ffffffff8141e758>] ? dev_hard_start_xmit+0x2c8/0x3f0 [<ffffffff81439d0a>] ? sch_direct_xmit+0x15a/0x1c0 [<ffffffff81423098>] ? dev_queue_xmit+0x388/0x4d0 [<ffffffffa032d6b7>] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib] [<ffffffffa032dab8>] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib] [<ffffffffa02a0946>] ? mcast_work_handler+0x1a6/0x710 [ib_sa] [<ffffffffa015f01e>] ? ib_send_mad+0xfe/0x3c0 [ib_mad] [<ffffffffa00f6c93>] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core] [<ffffffffa02a0f9b>] ? join_handler+0xeb/0x200 [ib_sa] [<ffffffffa029e4fc>] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa] [<ffffffffa029e79c>] ? recv_handler+0x3c/0x70 [ib_sa] [<ffffffffa01603a4>] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad] [<ffffffffa015fb60>] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad] [<ffffffff81088830>] ? worker_thread+0x170/0x2a0 [<ffffffff8108e160>] ? autoremove_wake_function+0x0/0x40 [<ffffffff810886c0>] ? worker_thread+0x0/0x2a0 [<ffffffff8108ddf6>] ? kthread+0x96/0xa0 [<ffffffff8100c1ca>] ? child_rip+0xa/0x20 Coinciding with stack trace is the following message: ib0: ib_address_create failed The code below in ipoib_mcast_join_finish() will note the above failure in the address handle but otherwise continue: ah = ipoib_create_ah(dev, priv->pd, &av); if (!ah) { ipoib_warn(priv, "ib_address_create failed\n"); } else { The while loop at the bottom of ipoib_mcast_join_finish() will attempt to send queued multicast packets in mcast->pkt_queue and eventually end up in ipoib_mcast_send(): if (!mcast->ah) { if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE) skb_queue_tail(&mcast->pkt_queue, skb); else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } My read is that the code will requeue the packet and return to the ipoib_mcast_join_finish() while loop and the stage is set for the "hung" task diagnostic as the while loop never sees a non-NULL ah, and will do nothing to resolve. There are GFP_ATOMIC allocates in the provider routines, so this is possible and should be dealt with. The test that induced the failure is associated with a host SM on the same server during a shutdown. This patch causes ipoib_mcast_join_finish() to exit with an error which will flush the queued mcast packets. Nothing is done to unwind the QP attached state so that subsequent sends from above will retry the join. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Reviewed-by: Gary Leshner <gary.leshner@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-21 21:43:54 +08:00
}
return ah;
}
void ipoib_free_ah(struct kref *kref)
{
struct ipoib_ah *ah = container_of(kref, struct ipoib_ah, ref);
struct ipoib_dev_priv *priv = ipoib_priv(ah->dev);
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
list_add_tail(&ah->list, &priv->dead_ahs);
spin_unlock_irqrestore(&priv->lock, flags);
}
static void ipoib_ud_dma_unmap_rx(struct ipoib_dev_priv *priv,
u64 mapping[IPOIB_UD_RX_SG])
{
ib_dma_unmap_single(priv->ca, mapping[0],
IPOIB_UD_BUF_SIZE(priv->max_ib_mtu),
DMA_FROM_DEVICE);
}
static int ipoib_ib_post_receive(struct net_device *dev, int id)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
struct ib_recv_wr *bad_wr;
int ret;
priv->rx_wr.wr_id = id | IPOIB_OP_RECV;
priv->rx_sge[0].addr = priv->rx_ring[id].mapping[0];
priv->rx_sge[1].addr = priv->rx_ring[id].mapping[1];
ret = ib_post_recv(priv->qp, &priv->rx_wr, &bad_wr);
if (unlikely(ret)) {
ipoib_warn(priv, "receive failed for buf %d (%d)\n", id, ret);
ipoib_ud_dma_unmap_rx(priv, priv->rx_ring[id].mapping);
dev_kfree_skb_any(priv->rx_ring[id].skb);
priv->rx_ring[id].skb = NULL;
}
return ret;
}
static struct sk_buff *ipoib_alloc_rx_skb(struct net_device *dev, int id)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
struct sk_buff *skb;
int buf_size;
u64 *mapping;
buf_size = IPOIB_UD_BUF_SIZE(priv->max_ib_mtu);
skb = dev_alloc_skb(buf_size + IPOIB_HARD_LEN);
if (unlikely(!skb))
return NULL;
/*
* the IP header will be at IPOIP_HARD_LEN + IB_GRH_BYTES, that is
* 64 bytes aligned
*/
skb_reserve(skb, sizeof(struct ipoib_pseudo_header));
mapping = priv->rx_ring[id].mapping;
mapping[0] = ib_dma_map_single(priv->ca, skb->data, buf_size,
DMA_FROM_DEVICE);
if (unlikely(ib_dma_mapping_error(priv->ca, mapping[0])))
goto error;
priv->rx_ring[id].skb = skb;
return skb;
error:
dev_kfree_skb_any(skb);
return NULL;
}
static int ipoib_ib_post_receives(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
int i;
for (i = 0; i < ipoib_recvq_size; ++i) {
if (!ipoib_alloc_rx_skb(dev, i)) {
ipoib_warn(priv, "failed to allocate receive buffer %d\n", i);
return -ENOMEM;
}
if (ipoib_ib_post_receive(dev, i)) {
ipoib_warn(priv, "ipoib_ib_post_receive failed for buf %d\n", i);
return -EIO;
}
}
return 0;
}
static void ipoib_ib_handle_rx_wc(struct net_device *dev, struct ib_wc *wc)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
unsigned int wr_id = wc->wr_id & ~IPOIB_OP_RECV;
struct sk_buff *skb;
u64 mapping[IPOIB_UD_RX_SG];
union ib_gid *dgid;
union ib_gid *sgid;
ipoib_dbg_data(priv, "recv completion: id %d, status: %d\n",
wr_id, wc->status);
if (unlikely(wr_id >= ipoib_recvq_size)) {
ipoib_warn(priv, "recv completion event with wrid %d (> %d)\n",
wr_id, ipoib_recvq_size);
return;
}
skb = priv->rx_ring[wr_id].skb;
if (unlikely(wc->status != IB_WC_SUCCESS)) {
if (wc->status != IB_WC_WR_FLUSH_ERR)
ipoib_warn(priv, "failed recv event "
"(status=%d, wrid=%d vend_err %x)\n",
wc->status, wr_id, wc->vendor_err);
ipoib_ud_dma_unmap_rx(priv, priv->rx_ring[wr_id].mapping);
dev_kfree_skb_any(skb);
priv->rx_ring[wr_id].skb = NULL;
return;
}
memcpy(mapping, priv->rx_ring[wr_id].mapping,
IPOIB_UD_RX_SG * sizeof *mapping);
/*
* If we can't allocate a new RX buffer, dump
* this packet and reuse the old buffer.
*/
if (unlikely(!ipoib_alloc_rx_skb(dev, wr_id))) {
++dev->stats.rx_dropped;
goto repost;
}
ipoib_dbg_data(priv, "received %d bytes, SLID 0x%04x\n",
wc->byte_len, wc->slid);
ipoib_ud_dma_unmap_rx(priv, mapping);
skb_put(skb, wc->byte_len);
/* First byte of dgid signals multicast when 0xff */
dgid = &((struct ib_grh *)skb->data)->dgid;
if (!(wc->wc_flags & IB_WC_GRH) || dgid->raw[0] != 0xff)
skb->pkt_type = PACKET_HOST;
else if (memcmp(dgid, dev->broadcast + 4, sizeof(union ib_gid)) == 0)
skb->pkt_type = PACKET_BROADCAST;
else
skb->pkt_type = PACKET_MULTICAST;
sgid = &((struct ib_grh *)skb->data)->sgid;
/*
* Drop packets that this interface sent, ie multicast packets
* that the HCA has replicated.
*/
if (wc->slid == priv->local_lid && wc->src_qp == priv->qp->qp_num) {
int need_repost = 1;
if ((wc->wc_flags & IB_WC_GRH) &&
sgid->global.interface_id != priv->local_gid.global.interface_id)
need_repost = 0;
if (need_repost) {
dev_kfree_skb_any(skb);
goto repost;
}
}
skb_pull(skb, IB_GRH_BYTES);
skb->protocol = ((struct ipoib_header *) skb->data)->proto;
skb_add_pseudo_hdr(skb);
++dev->stats.rx_packets;
dev->stats.rx_bytes += skb->len;
skb->dev = dev;
if ((dev->features & NETIF_F_RXCSUM) &&
likely(wc->wc_flags & IB_WC_IP_CSUM_OK))
skb->ip_summed = CHECKSUM_UNNECESSARY;
napi_gro_receive(&priv->napi, skb);
repost:
if (unlikely(ipoib_ib_post_receive(dev, wr_id)))
ipoib_warn(priv, "ipoib_ib_post_receive failed "
"for buf %d\n", wr_id);
}
int ipoib_dma_map_tx(struct ib_device *ca, struct ipoib_tx_buf *tx_req)
{
struct sk_buff *skb = tx_req->skb;
u64 *mapping = tx_req->mapping;
int i;
int off;
if (skb_headlen(skb)) {
mapping[0] = ib_dma_map_single(ca, skb->data, skb_headlen(skb),
DMA_TO_DEVICE);
if (unlikely(ib_dma_mapping_error(ca, mapping[0])))
return -EIO;
off = 1;
} else
off = 0;
for (i = 0; i < skb_shinfo(skb)->nr_frags; ++i) {
const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
mapping[i + off] = ib_dma_map_page(ca,
skb_frag_page(frag),
frag->page_offset, skb_frag_size(frag),
DMA_TO_DEVICE);
if (unlikely(ib_dma_mapping_error(ca, mapping[i + off])))
goto partial_error;
}
return 0;
partial_error:
for (; i > 0; --i) {
const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
ib_dma_unmap_page(ca, mapping[i - !off], skb_frag_size(frag), DMA_TO_DEVICE);
}
if (off)
ib_dma_unmap_single(ca, mapping[0], skb_headlen(skb), DMA_TO_DEVICE);
return -EIO;
}
void ipoib_dma_unmap_tx(struct ipoib_dev_priv *priv,
struct ipoib_tx_buf *tx_req)
{
struct sk_buff *skb = tx_req->skb;
u64 *mapping = tx_req->mapping;
int i;
int off;
if (skb_headlen(skb)) {
ib_dma_unmap_single(priv->ca, mapping[0], skb_headlen(skb),
DMA_TO_DEVICE);
off = 1;
} else
off = 0;
for (i = 0; i < skb_shinfo(skb)->nr_frags; ++i) {
const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
ib_dma_unmap_page(priv->ca, mapping[i + off],
skb_frag_size(frag), DMA_TO_DEVICE);
}
}
/*
* As the result of a completion error the QP Can be transferred to SQE states.
* The function checks if the (send)QP is in SQE state and
* moves it back to RTS state, that in order to have it functional again.
*/
static void ipoib_qp_state_validate_work(struct work_struct *work)
{
struct ipoib_qp_state_validate *qp_work =
container_of(work, struct ipoib_qp_state_validate, work);
struct ipoib_dev_priv *priv = qp_work->priv;
struct ib_qp_attr qp_attr;
struct ib_qp_init_attr query_init_attr;
int ret;
ret = ib_query_qp(priv->qp, &qp_attr, IB_QP_STATE, &query_init_attr);
if (ret) {
ipoib_warn(priv, "%s: Failed to query QP ret: %d\n",
__func__, ret);
goto free_res;
}
pr_info("%s: QP: 0x%x is in state: %d\n",
__func__, priv->qp->qp_num, qp_attr.qp_state);
/* currently support only in SQE->RTS transition*/
if (qp_attr.qp_state == IB_QPS_SQE) {
qp_attr.qp_state = IB_QPS_RTS;
ret = ib_modify_qp(priv->qp, &qp_attr, IB_QP_STATE);
if (ret) {
pr_warn("failed(%d) modify QP:0x%x SQE->RTS\n",
ret, priv->qp->qp_num);
goto free_res;
}
pr_info("%s: QP: 0x%x moved from IB_QPS_SQE to IB_QPS_RTS\n",
__func__, priv->qp->qp_num);
} else {
pr_warn("QP (%d) will stay in state: %d\n",
priv->qp->qp_num, qp_attr.qp_state);
}
free_res:
kfree(qp_work);
}
static void ipoib_ib_handle_tx_wc(struct net_device *dev, struct ib_wc *wc)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
unsigned int wr_id = wc->wr_id;
struct ipoib_tx_buf *tx_req;
ipoib_dbg_data(priv, "send completion: id %d, status: %d\n",
wr_id, wc->status);
if (unlikely(wr_id >= ipoib_sendq_size)) {
ipoib_warn(priv, "send completion event with wrid %d (> %d)\n",
wr_id, ipoib_sendq_size);
return;
}
tx_req = &priv->tx_ring[wr_id];
ipoib_dma_unmap_tx(priv, tx_req);
++dev->stats.tx_packets;
dev->stats.tx_bytes += tx_req->skb->len;
dev_kfree_skb_any(tx_req->skb);
++priv->tx_tail;
if (unlikely(--priv->tx_outstanding == ipoib_sendq_size >> 1) &&
netif_queue_stopped(dev) &&
test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
netif_wake_queue(dev);
if (wc->status != IB_WC_SUCCESS &&
wc->status != IB_WC_WR_FLUSH_ERR) {
struct ipoib_qp_state_validate *qp_work;
ipoib_warn(priv, "failed send event "
"(status=%d, wrid=%d vend_err %x)\n",
wc->status, wr_id, wc->vendor_err);
qp_work = kzalloc(sizeof(*qp_work), GFP_ATOMIC);
if (!qp_work)
return;
INIT_WORK(&qp_work->work, ipoib_qp_state_validate_work);
qp_work->priv = priv;
queue_work(priv->wq, &qp_work->work);
}
}
static int poll_tx(struct ipoib_dev_priv *priv)
{
int n, i;
n = ib_poll_cq(priv->send_cq, MAX_SEND_CQE, priv->send_wc);
for (i = 0; i < n; ++i)
ipoib_ib_handle_tx_wc(priv->dev, priv->send_wc + i);
return n == MAX_SEND_CQE;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
int ipoib_poll(struct napi_struct *napi, int budget)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct ipoib_dev_priv *priv = container_of(napi, struct ipoib_dev_priv, napi);
struct net_device *dev = priv->dev;
int done;
int t;
int n, i;
done = 0;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
poll_more:
while (done < budget) {
int max = (budget - done);
t = min(IPOIB_NUM_WC, max);
n = ib_poll_cq(priv->recv_cq, t, priv->ibwc);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
for (i = 0; i < n; i++) {
struct ib_wc *wc = priv->ibwc + i;
if (wc->wr_id & IPOIB_OP_RECV) {
++done;
if (wc->wr_id & IPOIB_OP_CM)
ipoib_cm_handle_rx_wc(dev, wc);
else
ipoib_ib_handle_rx_wc(dev, wc);
} else
ipoib_cm_handle_tx_wc(priv->dev, wc);
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (n != t)
break;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (done < budget) {
napi_complete(napi);
if (unlikely(ib_req_notify_cq(priv->recv_cq,
IB_CQ_NEXT_COMP |
IB_CQ_REPORT_MISSED_EVENTS)) &&
napi_reschedule(napi))
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
goto poll_more;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
return done;
}
void ipoib_ib_completion(struct ib_cq *cq, void *dev_ptr)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct net_device *dev = dev_ptr;
struct ipoib_dev_priv *priv = ipoib_priv(dev);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
napi_schedule(&priv->napi);
}
static void drain_tx_cq(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
netif_tx_lock(dev);
while (poll_tx(priv))
; /* nothing */
if (netif_queue_stopped(dev))
mod_timer(&priv->poll_timer, jiffies + 1);
netif_tx_unlock(dev);
}
void ipoib_send_comp_handler(struct ib_cq *cq, void *dev_ptr)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev_ptr);
mod_timer(&priv->poll_timer, jiffies);
}
static inline int post_send(struct ipoib_dev_priv *priv,
unsigned int wr_id,
struct ib_ah *address, u32 dqpn,
struct ipoib_tx_buf *tx_req,
void *head, int hlen)
{
struct ib_send_wr *bad_wr;
struct sk_buff *skb = tx_req->skb;
ipoib_build_sge(priv, tx_req);
priv->tx_wr.wr.wr_id = wr_id;
priv->tx_wr.remote_qpn = dqpn;
priv->tx_wr.ah = address;
if (head) {
priv->tx_wr.mss = skb_shinfo(skb)->gso_size;
priv->tx_wr.header = head;
priv->tx_wr.hlen = hlen;
priv->tx_wr.wr.opcode = IB_WR_LSO;
} else
priv->tx_wr.wr.opcode = IB_WR_SEND;
return ib_post_send(priv->qp, &priv->tx_wr.wr, &bad_wr);
}
int ipoib_send(struct net_device *dev, struct sk_buff *skb,
struct ib_ah *address, u32 dqpn)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
struct ipoib_tx_buf *tx_req;
int hlen, rc;
void *phead;
unsigned usable_sge = priv->max_send_sge - !!skb_headlen(skb);
if (skb_is_gso(skb)) {
hlen = skb_transport_offset(skb) + tcp_hdrlen(skb);
phead = skb->data;
if (unlikely(!skb_pull(skb, hlen))) {
ipoib_warn(priv, "linear data too small\n");
++dev->stats.tx_dropped;
++dev->stats.tx_errors;
dev_kfree_skb_any(skb);
return -1;
}
} else {
if (unlikely(skb->len > priv->mcast_mtu + IPOIB_ENCAP_LEN)) {
ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
skb->len, priv->mcast_mtu + IPOIB_ENCAP_LEN);
++dev->stats.tx_dropped;
++dev->stats.tx_errors;
ipoib_cm_skb_too_long(dev, skb, priv->mcast_mtu);
return -1;
}
phead = NULL;
hlen = 0;
}
if (skb_shinfo(skb)->nr_frags > usable_sge) {
if (skb_linearize(skb) < 0) {
ipoib_warn(priv, "skb could not be linearized\n");
++dev->stats.tx_dropped;
++dev->stats.tx_errors;
dev_kfree_skb_any(skb);
return -1;
}
/* Does skb_linearize return ok without reducing nr_frags? */
if (skb_shinfo(skb)->nr_frags > usable_sge) {
ipoib_warn(priv, "too many frags after skb linearize\n");
++dev->stats.tx_dropped;
++dev->stats.tx_errors;
dev_kfree_skb_any(skb);
return -1;
}
}
ipoib_dbg_data(priv,
"sending packet, length=%d address=%p dqpn=0x%06x\n",
skb->len, address, dqpn);
/*
* We put the skb into the tx_ring _before_ we call post_send()
* because it's entirely possible that the completion handler will
* run before we execute anything after the post_send(). That
* means we have to make sure everything is properly recorded and
* our state is consistent before we call post_send().
*/
tx_req = &priv->tx_ring[priv->tx_head & (ipoib_sendq_size - 1)];
tx_req->skb = skb;
if (unlikely(ipoib_dma_map_tx(priv->ca, tx_req))) {
++dev->stats.tx_errors;
dev_kfree_skb_any(skb);
return -1;
}
if (skb->ip_summed == CHECKSUM_PARTIAL)
priv->tx_wr.wr.send_flags |= IB_SEND_IP_CSUM;
else
priv->tx_wr.wr.send_flags &= ~IB_SEND_IP_CSUM;
if (++priv->tx_outstanding == ipoib_sendq_size) {
ipoib_dbg(priv, "TX ring full, stopping kernel net queue\n");
if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
ipoib_warn(priv, "request notify on send CQ failed\n");
netif_stop_queue(dev);
}
skb_orphan(skb);
skb_dst_drop(skb);
rc = post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
address, dqpn, tx_req, phead, hlen);
if (unlikely(rc)) {
ipoib_warn(priv, "post_send failed, error %d\n", rc);
++dev->stats.tx_errors;
--priv->tx_outstanding;
ipoib_dma_unmap_tx(priv, tx_req);
dev_kfree_skb_any(skb);
if (netif_queue_stopped(dev))
netif_wake_queue(dev);
rc = 0;
} else {
netif_trans_update(dev);
rc = priv->tx_head;
++priv->tx_head;
}
if (unlikely(priv->tx_outstanding > MAX_SEND_CQE))
while (poll_tx(priv))
; /* nothing */
return rc;
}
static void __ipoib_reap_ah(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
struct ipoib_ah *ah, *tah;
LIST_HEAD(remove_list);
unsigned long flags;
netif_tx_lock_bh(dev);
spin_lock_irqsave(&priv->lock, flags);
list_for_each_entry_safe(ah, tah, &priv->dead_ahs, list)
if ((int) priv->tx_tail - (int) ah->last_send >= 0) {
list_del(&ah->list);
rdma_destroy_ah(ah->ah);
kfree(ah);
}
spin_unlock_irqrestore(&priv->lock, flags);
netif_tx_unlock_bh(dev);
}
void ipoib_reap_ah(struct work_struct *work)
{
struct ipoib_dev_priv *priv =
container_of(work, struct ipoib_dev_priv, ah_reap_task.work);
struct net_device *dev = priv->dev;
__ipoib_reap_ah(dev);
if (!test_bit(IPOIB_STOP_REAPER, &priv->flags))
IB/ipoib: Use dedicated workqueues per interface During my recent work on the rtnl lock deadlock in the IPoIB driver, I saw that even once I fixed the apparent races for a single device, as soon as that device had any children, new races popped up. It turns out that this is because no matter how well we protect against races on a single device, the fact that all devices use the same workqueue, and flush_workqueue() flushes *everything* from that workqueue means that we would also have to prevent all races between different devices (for instance, ipoib_mcast_restart_task on interface ib0 can race with ipoib_mcast_flush_dev on interface ib0.8002, resulting in a deadlock on the rtnl_lock). There are several possible solutions to this problem: Make carrier_on_task and mcast_restart_task try to take the rtnl for some set period of time and if they fail, then bail. This runs the real risk of dropping work on the floor, which can end up being its own separate kind of deadlock. Set some global flag in the driver that says some device is in the middle of going down, letting all tasks know to bail. Again, this can drop work on the floor. Or the method this patch attempts to use, which is when we bring an interface up, create a workqueue specifically for that interface, so that when we take it back down, we are flushing only those tasks associated with our interface. In addition, keep the global workqueue, but now limit it to only flush tasks. In this way, the flush tasks can always flush the device specific work queues without having deadlock issues. Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-02-22 08:27:03 +08:00
queue_delayed_work(priv->wq, &priv->ah_reap_task,
round_jiffies_relative(HZ));
}
static void ipoib_flush_ah(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
cancel_delayed_work(&priv->ah_reap_task);
flush_workqueue(priv->wq);
ipoib_reap_ah(&priv->ah_reap_task.work);
}
static void ipoib_stop_ah(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
set_bit(IPOIB_STOP_REAPER, &priv->flags);
ipoib_flush_ah(dev);
}
static int recvs_pending(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
int pending = 0;
int i;
for (i = 0; i < ipoib_recvq_size; ++i)
if (priv->rx_ring[i].skb)
++pending;
return pending;
}
int ipoib_ib_dev_stop_default(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
struct ib_qp_attr qp_attr;
unsigned long begin;
struct ipoib_tx_buf *tx_req;
int i;
if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
napi_disable(&priv->napi);
ipoib_cm_dev_stop(dev);
/*
* Move our QP to the error state and then reinitialize in
* when all work requests have completed or have been flushed.
*/
qp_attr.qp_state = IB_QPS_ERR;
if (ib_modify_qp(priv->qp, &qp_attr, IB_QP_STATE))
ipoib_warn(priv, "Failed to modify QP to ERROR state\n");
/* Wait for all sends and receives to complete */
begin = jiffies;
while (priv->tx_head != priv->tx_tail || recvs_pending(dev)) {
if (time_after(jiffies, begin + 5 * HZ)) {
ipoib_warn(priv,
"timing out; %d sends %d receives not completed\n",
priv->tx_head - priv->tx_tail,
recvs_pending(dev));
/*
* assume the HW is wedged and just free up
* all our pending work requests.
*/
while ((int)priv->tx_tail - (int)priv->tx_head < 0) {
tx_req = &priv->tx_ring[priv->tx_tail &
(ipoib_sendq_size - 1)];
ipoib_dma_unmap_tx(priv, tx_req);
dev_kfree_skb_any(tx_req->skb);
++priv->tx_tail;
--priv->tx_outstanding;
}
for (i = 0; i < ipoib_recvq_size; ++i) {
struct ipoib_rx_buf *rx_req;
rx_req = &priv->rx_ring[i];
if (!rx_req->skb)
continue;
ipoib_ud_dma_unmap_rx(priv,
priv->rx_ring[i].mapping);
dev_kfree_skb_any(rx_req->skb);
rx_req->skb = NULL;
}
goto timeout;
}
ipoib_drain_cq(dev);
msleep(1);
}
ipoib_dbg(priv, "All sends and receives done.\n");
timeout:
del_timer_sync(&priv->poll_timer);
qp_attr.qp_state = IB_QPS_RESET;
if (ib_modify_qp(priv->qp, &qp_attr, IB_QP_STATE))
ipoib_warn(priv, "Failed to modify QP to RESET state\n");
ib_req_notify_cq(priv->recv_cq, IB_CQ_NEXT_COMP);
return 0;
}
int ipoib_ib_dev_stop(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
priv->rn_ops->ndo_stop(dev);
clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
ipoib_flush_ah(dev);
return 0;
}
void ipoib_ib_tx_timer_func(unsigned long ctx)
{
drain_tx_cq((struct net_device *)ctx);
}
int ipoib_ib_dev_open_default(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
int ret;
ret = ipoib_init_qp(dev);
if (ret) {
ipoib_warn(priv, "ipoib_init_qp returned %d\n", ret);
return -1;
}
ret = ipoib_ib_post_receives(dev);
if (ret) {
ipoib_warn(priv, "ipoib_ib_post_receives returned %d\n", ret);
goto out;
}
ret = ipoib_cm_dev_open(dev);
if (ret) {
ipoib_warn(priv, "ipoib_cm_dev_open returned %d\n", ret);
goto out;
}
if (!test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
napi_enable(&priv->napi);
return 0;
out:
return -1;
}
int ipoib_ib_dev_open(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
ipoib_pkey_dev_check_presence(dev);
if (!test_bit(IPOIB_PKEY_ASSIGNED, &priv->flags)) {
ipoib_warn(priv, "P_Key 0x%04x is %s\n", priv->pkey,
(!(priv->pkey & 0x7fff) ? "Invalid" : "not found"));
return -1;
}
clear_bit(IPOIB_STOP_REAPER, &priv->flags);
queue_delayed_work(priv->wq, &priv->ah_reap_task,
round_jiffies_relative(HZ));
if (priv->rn_ops->ndo_open(dev)) {
pr_warn("%s: Failed to open dev\n", dev->name);
goto dev_stop;
}
set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
return 0;
dev_stop:
set_bit(IPOIB_STOP_REAPER, &priv->flags);
cancel_delayed_work(&priv->ah_reap_task);
set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
napi_enable(&priv->napi);
ipoib_ib_dev_stop(dev);
return -1;
}
void ipoib_pkey_dev_check_presence(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
if (!(priv->pkey & 0x7fff) ||
ib_find_pkey(priv->ca, priv->port, priv->pkey,
&priv->pkey_index))
clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
else
set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
}
void ipoib_ib_dev_up(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
ipoib_pkey_dev_check_presence(dev);
if (!test_bit(IPOIB_PKEY_ASSIGNED, &priv->flags)) {
ipoib_dbg(priv, "PKEY is not assigned.\n");
return;
}
set_bit(IPOIB_FLAG_OPER_UP, &priv->flags);
ipoib_mcast_start_thread(dev);
}
void ipoib_ib_dev_down(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
ipoib_dbg(priv, "downing ib_dev\n");
clear_bit(IPOIB_FLAG_OPER_UP, &priv->flags);
netif_carrier_off(dev);
ipoib_mcast_stop_thread(dev);
ipoib_mcast_dev_flush(dev);
ipoib_flush_paths(dev);
}
void ipoib_drain_cq(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
int i, n;
/*
* We call completion handling routines that expect to be
* called from the BH-disabled NAPI poll context, so disable
* BHs here too.
*/
local_bh_disable();
do {
n = ib_poll_cq(priv->recv_cq, IPOIB_NUM_WC, priv->ibwc);
for (i = 0; i < n; ++i) {
/*
* Convert any successful completions to flush
* errors to avoid passing packets up the
* stack after bringing the device down.
*/
if (priv->ibwc[i].status == IB_WC_SUCCESS)
priv->ibwc[i].status = IB_WC_WR_FLUSH_ERR;
if (priv->ibwc[i].wr_id & IPOIB_OP_RECV) {
if (priv->ibwc[i].wr_id & IPOIB_OP_CM)
ipoib_cm_handle_rx_wc(dev, priv->ibwc + i);
else
ipoib_ib_handle_rx_wc(dev, priv->ibwc + i);
} else
ipoib_cm_handle_tx_wc(dev, priv->ibwc + i);
}
} while (n == IPOIB_NUM_WC);
while (poll_tx(priv))
; /* nothing */
local_bh_enable();
}
IPoIB: Fix pkey change flow for virtualization environments IPoIB's required behaviour w.r.t to the pkey used by the device is the following: - For "parent" interfaces (e.g ib0, ib1, etc) who are created automatically as a result of hot-plug events from the IB core, the driver needs to take whatever pkey vlaue it finds in index 0, and stick to that index. - For child interfaces (e.g ib0.8001, etc) created by admin directive, the driver needs to use and stick to the value provided during its creation. In SR-IOV environment its possible for the VF probe to take place before the cloud management software provisions the suitable pkey for the VF in the paravirtualed PKEY table index 0. When this is the case, the VF IB stack will find in index 0 an invalide pkey, which is all zeros. Moreover, the cloud managment can assign the pkey value at index 0 at any time of the guest life cycle. The correct behavior for IPoIB to address these requirements for parent interfaces is to use PKEY_CHANGE event as trigger to optionally re-init the device pkey value and re-create all the relevant resources accordingly, if the value of the pkey in index 0 has changed (from invalid to valid or from valid value X to invalid value Y). This patch enhances the heavy flushing code which is triggered by pkey change event, to behave correctly for parent devices. For child devices, the code remains the same, namely chases pkey value and not index. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-18 19:02:32 +08:00
/*
* Takes whatever value which is in pkey index 0 and updates priv->pkey
* returns 0 if the pkey value was changed.
*/
static inline int update_parent_pkey(struct ipoib_dev_priv *priv)
{
int result;
u16 prev_pkey;
prev_pkey = priv->pkey;
result = ib_query_pkey(priv->ca, priv->port, 0, &priv->pkey);
if (result) {
ipoib_warn(priv, "ib_query_pkey port %d failed (ret = %d)\n",
priv->port, result);
return result;
}
priv->pkey |= 0x8000;
if (prev_pkey != priv->pkey) {
ipoib_dbg(priv, "pkey changed from 0x%x to 0x%x\n",
prev_pkey, priv->pkey);
/*
* Update the pkey in the broadcast address, while making sure to set
* the full membership bit, so that we join the right broadcast group.
*/
priv->dev->broadcast[8] = priv->pkey >> 8;
priv->dev->broadcast[9] = priv->pkey & 0xff;
/*
* Update the broadcast address in the priv->broadcast object,
* in case it already exists, otherwise no one will do that.
*/
if (priv->broadcast) {
spin_lock_irq(&priv->lock);
memcpy(priv->broadcast->mcmember.mgid.raw,
priv->dev->broadcast + 4,
sizeof(union ib_gid));
spin_unlock_irq(&priv->lock);
}
IPoIB: Fix pkey change flow for virtualization environments IPoIB's required behaviour w.r.t to the pkey used by the device is the following: - For "parent" interfaces (e.g ib0, ib1, etc) who are created automatically as a result of hot-plug events from the IB core, the driver needs to take whatever pkey vlaue it finds in index 0, and stick to that index. - For child interfaces (e.g ib0.8001, etc) created by admin directive, the driver needs to use and stick to the value provided during its creation. In SR-IOV environment its possible for the VF probe to take place before the cloud management software provisions the suitable pkey for the VF in the paravirtualed PKEY table index 0. When this is the case, the VF IB stack will find in index 0 an invalide pkey, which is all zeros. Moreover, the cloud managment can assign the pkey value at index 0 at any time of the guest life cycle. The correct behavior for IPoIB to address these requirements for parent interfaces is to use PKEY_CHANGE event as trigger to optionally re-init the device pkey value and re-create all the relevant resources accordingly, if the value of the pkey in index 0 has changed (from invalid to valid or from valid value X to invalid value Y). This patch enhances the heavy flushing code which is triggered by pkey change event, to behave correctly for parent devices. For child devices, the code remains the same, namely chases pkey value and not index. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-18 19:02:32 +08:00
return 0;
}
return 1;
}
/*
* returns 0 if pkey value was found in a different slot.
*/
static inline int update_child_pkey(struct ipoib_dev_priv *priv)
{
u16 old_index = priv->pkey_index;
priv->pkey_index = 0;
ipoib_pkey_dev_check_presence(priv->dev);
if (test_bit(IPOIB_PKEY_ASSIGNED, &priv->flags) &&
(old_index == priv->pkey_index))
return 1;
return 0;
}
IPoIB: Fix pkey change flow for virtualization environments IPoIB's required behaviour w.r.t to the pkey used by the device is the following: - For "parent" interfaces (e.g ib0, ib1, etc) who are created automatically as a result of hot-plug events from the IB core, the driver needs to take whatever pkey vlaue it finds in index 0, and stick to that index. - For child interfaces (e.g ib0.8001, etc) created by admin directive, the driver needs to use and stick to the value provided during its creation. In SR-IOV environment its possible for the VF probe to take place before the cloud management software provisions the suitable pkey for the VF in the paravirtualed PKEY table index 0. When this is the case, the VF IB stack will find in index 0 an invalide pkey, which is all zeros. Moreover, the cloud managment can assign the pkey value at index 0 at any time of the guest life cycle. The correct behavior for IPoIB to address these requirements for parent interfaces is to use PKEY_CHANGE event as trigger to optionally re-init the device pkey value and re-create all the relevant resources accordingly, if the value of the pkey in index 0 has changed (from invalid to valid or from valid value X to invalid value Y). This patch enhances the heavy flushing code which is triggered by pkey change event, to behave correctly for parent devices. For child devices, the code remains the same, namely chases pkey value and not index. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-18 19:02:32 +08:00
IB/IPoIB: Allow setting the device address In IB networks, and specifically in IPoIB/rdmacm traffic, the device address of an IPoIB interface is used as a means to exchange information between nodes needed for communication. Currently an IPoIB interface will always be created with a device address based on its node GUID without a way to change that. This change adds the ability to set the device address of an IPoIB interface by value. We use the set mac address ndo to do that. The flow should be broken down to two: 1) The GID value is already in the GID table, in this case the interface will be able to set carrier up. 2) The GID value is not yet in the GID table, in this case the interface won't try to join the multicast group and will wait (listen on GID_CHANGE event) until the GID is inserted. In order to track those changes, we add a new flag: * IPOIB_FLAG_DEV_ADDR_SET. When set, it means the dev_addr is a based on a value in the gid table. this bit will be cleared upon a dev_addr change triggered by the user and set after validation. Per IB spec the port GUID can't change if the module is loaded. port GUID is the basis for GID at index 0 which is the basis for the default device address of a ipoib interface. The issue is that there are devices that don't follow the spec, they change the port GUID while HCA is powered on, so in order not to break userspace applications. We need to check if the user wanted to control the device address and we assume that if he sets the device address back to be based on GID index 0, he no longer wishs to control it. In order to track this, we add an additional flag: * IPOIB_FLAG_DEV_ADDR_CTRL When setting the device address, there is no validation of the upper twelve bytes of the device address (flags, qpn, subnet prefix) as those bytes are not under the control of the user. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-18 21:42:43 +08:00
/*
* returns true if the device address of the ipoib interface has changed and the
* new address is a valid one (i.e in the gid table), return false otherwise.
*/
static bool ipoib_dev_addr_changed_valid(struct ipoib_dev_priv *priv)
{
union ib_gid search_gid;
union ib_gid gid0;
union ib_gid *netdev_gid;
int err;
u16 index;
u8 port;
bool ret = false;
netdev_gid = (union ib_gid *)(priv->dev->dev_addr + 4);
if (ib_query_gid(priv->ca, priv->port, 0, &gid0, NULL))
return false;
netif_addr_lock_bh(priv->dev);
IB/IPoIB: Allow setting the device address In IB networks, and specifically in IPoIB/rdmacm traffic, the device address of an IPoIB interface is used as a means to exchange information between nodes needed for communication. Currently an IPoIB interface will always be created with a device address based on its node GUID without a way to change that. This change adds the ability to set the device address of an IPoIB interface by value. We use the set mac address ndo to do that. The flow should be broken down to two: 1) The GID value is already in the GID table, in this case the interface will be able to set carrier up. 2) The GID value is not yet in the GID table, in this case the interface won't try to join the multicast group and will wait (listen on GID_CHANGE event) until the GID is inserted. In order to track those changes, we add a new flag: * IPOIB_FLAG_DEV_ADDR_SET. When set, it means the dev_addr is a based on a value in the gid table. this bit will be cleared upon a dev_addr change triggered by the user and set after validation. Per IB spec the port GUID can't change if the module is loaded. port GUID is the basis for GID at index 0 which is the basis for the default device address of a ipoib interface. The issue is that there are devices that don't follow the spec, they change the port GUID while HCA is powered on, so in order not to break userspace applications. We need to check if the user wanted to control the device address and we assume that if he sets the device address back to be based on GID index 0, he no longer wishs to control it. In order to track this, we add an additional flag: * IPOIB_FLAG_DEV_ADDR_CTRL When setting the device address, there is no validation of the upper twelve bytes of the device address (flags, qpn, subnet prefix) as those bytes are not under the control of the user. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-18 21:42:43 +08:00
/* The subnet prefix may have changed, update it now so we won't have
* to do it later
*/
priv->local_gid.global.subnet_prefix = gid0.global.subnet_prefix;
netdev_gid->global.subnet_prefix = gid0.global.subnet_prefix;
search_gid.global.subnet_prefix = gid0.global.subnet_prefix;
search_gid.global.interface_id = priv->local_gid.global.interface_id;
netif_addr_unlock_bh(priv->dev);
IB/IPoIB: Allow setting the device address In IB networks, and specifically in IPoIB/rdmacm traffic, the device address of an IPoIB interface is used as a means to exchange information between nodes needed for communication. Currently an IPoIB interface will always be created with a device address based on its node GUID without a way to change that. This change adds the ability to set the device address of an IPoIB interface by value. We use the set mac address ndo to do that. The flow should be broken down to two: 1) The GID value is already in the GID table, in this case the interface will be able to set carrier up. 2) The GID value is not yet in the GID table, in this case the interface won't try to join the multicast group and will wait (listen on GID_CHANGE event) until the GID is inserted. In order to track those changes, we add a new flag: * IPOIB_FLAG_DEV_ADDR_SET. When set, it means the dev_addr is a based on a value in the gid table. this bit will be cleared upon a dev_addr change triggered by the user and set after validation. Per IB spec the port GUID can't change if the module is loaded. port GUID is the basis for GID at index 0 which is the basis for the default device address of a ipoib interface. The issue is that there are devices that don't follow the spec, they change the port GUID while HCA is powered on, so in order not to break userspace applications. We need to check if the user wanted to control the device address and we assume that if he sets the device address back to be based on GID index 0, he no longer wishs to control it. In order to track this, we add an additional flag: * IPOIB_FLAG_DEV_ADDR_CTRL When setting the device address, there is no validation of the upper twelve bytes of the device address (flags, qpn, subnet prefix) as those bytes are not under the control of the user. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-18 21:42:43 +08:00
err = ib_find_gid(priv->ca, &search_gid, IB_GID_TYPE_IB,
priv->dev, &port, &index);
netif_addr_lock_bh(priv->dev);
IB/IPoIB: Allow setting the device address In IB networks, and specifically in IPoIB/rdmacm traffic, the device address of an IPoIB interface is used as a means to exchange information between nodes needed for communication. Currently an IPoIB interface will always be created with a device address based on its node GUID without a way to change that. This change adds the ability to set the device address of an IPoIB interface by value. We use the set mac address ndo to do that. The flow should be broken down to two: 1) The GID value is already in the GID table, in this case the interface will be able to set carrier up. 2) The GID value is not yet in the GID table, in this case the interface won't try to join the multicast group and will wait (listen on GID_CHANGE event) until the GID is inserted. In order to track those changes, we add a new flag: * IPOIB_FLAG_DEV_ADDR_SET. When set, it means the dev_addr is a based on a value in the gid table. this bit will be cleared upon a dev_addr change triggered by the user and set after validation. Per IB spec the port GUID can't change if the module is loaded. port GUID is the basis for GID at index 0 which is the basis for the default device address of a ipoib interface. The issue is that there are devices that don't follow the spec, they change the port GUID while HCA is powered on, so in order not to break userspace applications. We need to check if the user wanted to control the device address and we assume that if he sets the device address back to be based on GID index 0, he no longer wishs to control it. In order to track this, we add an additional flag: * IPOIB_FLAG_DEV_ADDR_CTRL When setting the device address, there is no validation of the upper twelve bytes of the device address (flags, qpn, subnet prefix) as those bytes are not under the control of the user. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-18 21:42:43 +08:00
if (search_gid.global.interface_id !=
priv->local_gid.global.interface_id)
/* There was a change while we were looking up the gid, bail
* here and let the next work sort this out
*/
goto out;
/* The next section of code needs some background:
* Per IB spec the port GUID can't change if the HCA is powered on.
* port GUID is the basis for GID at index 0 which is the basis for
* the default device address of a ipoib interface.
*
* so it seems the flow should be:
* if user_changed_dev_addr && gid in gid tbl
* set bit dev_addr_set
* return true
* else
* return false
*
* The issue is that there are devices that don't follow the spec,
* they change the port GUID when the HCA is powered, so in order
* not to break userspace applications, We need to check if the
* user wanted to control the device address and we assume that
* if he sets the device address back to be based on GID index 0,
* he no longer wishs to control it.
*
* If the user doesn't control the the device address,
* IPOIB_FLAG_DEV_ADDR_SET is set and ib_find_gid failed it means
* the port GUID has changed and GID at index 0 has changed
* so we need to change priv->local_gid and priv->dev->dev_addr
* to reflect the new GID.
*/
if (!test_bit(IPOIB_FLAG_DEV_ADDR_SET, &priv->flags)) {
if (!err && port == priv->port) {
set_bit(IPOIB_FLAG_DEV_ADDR_SET, &priv->flags);
if (index == 0)
clear_bit(IPOIB_FLAG_DEV_ADDR_CTRL,
&priv->flags);
else
set_bit(IPOIB_FLAG_DEV_ADDR_CTRL, &priv->flags);
ret = true;
} else {
ret = false;
}
} else {
if (!err && port == priv->port) {
ret = true;
} else {
if (!test_bit(IPOIB_FLAG_DEV_ADDR_CTRL, &priv->flags)) {
memcpy(&priv->local_gid, &gid0,
sizeof(priv->local_gid));
memcpy(priv->dev->dev_addr + 4, &gid0,
sizeof(priv->local_gid));
ret = true;
}
}
}
out:
netif_addr_unlock_bh(priv->dev);
IB/IPoIB: Allow setting the device address In IB networks, and specifically in IPoIB/rdmacm traffic, the device address of an IPoIB interface is used as a means to exchange information between nodes needed for communication. Currently an IPoIB interface will always be created with a device address based on its node GUID without a way to change that. This change adds the ability to set the device address of an IPoIB interface by value. We use the set mac address ndo to do that. The flow should be broken down to two: 1) The GID value is already in the GID table, in this case the interface will be able to set carrier up. 2) The GID value is not yet in the GID table, in this case the interface won't try to join the multicast group and will wait (listen on GID_CHANGE event) until the GID is inserted. In order to track those changes, we add a new flag: * IPOIB_FLAG_DEV_ADDR_SET. When set, it means the dev_addr is a based on a value in the gid table. this bit will be cleared upon a dev_addr change triggered by the user and set after validation. Per IB spec the port GUID can't change if the module is loaded. port GUID is the basis for GID at index 0 which is the basis for the default device address of a ipoib interface. The issue is that there are devices that don't follow the spec, they change the port GUID while HCA is powered on, so in order not to break userspace applications. We need to check if the user wanted to control the device address and we assume that if he sets the device address back to be based on GID index 0, he no longer wishs to control it. In order to track this, we add an additional flag: * IPOIB_FLAG_DEV_ADDR_CTRL When setting the device address, there is no validation of the upper twelve bytes of the device address (flags, qpn, subnet prefix) as those bytes are not under the control of the user. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-18 21:42:43 +08:00
return ret;
}
static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv,
IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush __ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep complains about locking vlan_rwsem twice (see below). Use down_read_nested instead of down_read to prevent the warning. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc4+ #36 Tainted: G O --------------------------------------------- kworker/u20:2/261 is trying to acquire lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] but task is already holding lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&priv->vlan_rwsem); lock(&priv->vlan_rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u20:2/261: #0: ("%s""ipoib_flush"){.+.+..}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #1: ((&priv->flush_heavy)){+.+...}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #2: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] stack backtrace: CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G O 4.1.0-rc4+ #36 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib] ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001 ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000 ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790 Call Trace: [<ffffffff81665238>] dump_stack+0x4f/0x6f [<ffffffff810bba51>] __lock_acquire+0x741/0x1820 [<ffffffff810bcbf8>] lock_acquire+0xc8/0x240 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffff81669d2c>] down_read+0x4c/0x70 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e4a>] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib] [<ffffffffa07920ba>] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib] [<ffffffff81082871>] process_one_work+0x201/0x760 [<ffffffff810827cc>] ? process_one_work+0x15c/0x760 [<ffffffff81082ef0>] worker_thread+0x120/0x4d0 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81088b7e>] kthread+0xfe/0x120 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8166c6e2>] ret_from_fork+0x42/0x70 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-07 22:45:13 +08:00
enum ipoib_flush_level level,
int nesting)
{
struct ipoib_dev_priv *cpriv;
struct net_device *dev = priv->dev;
IPoIB: Fix pkey change flow for virtualization environments IPoIB's required behaviour w.r.t to the pkey used by the device is the following: - For "parent" interfaces (e.g ib0, ib1, etc) who are created automatically as a result of hot-plug events from the IB core, the driver needs to take whatever pkey vlaue it finds in index 0, and stick to that index. - For child interfaces (e.g ib0.8001, etc) created by admin directive, the driver needs to use and stick to the value provided during its creation. In SR-IOV environment its possible for the VF probe to take place before the cloud management software provisions the suitable pkey for the VF in the paravirtualed PKEY table index 0. When this is the case, the VF IB stack will find in index 0 an invalide pkey, which is all zeros. Moreover, the cloud managment can assign the pkey value at index 0 at any time of the guest life cycle. The correct behavior for IPoIB to address these requirements for parent interfaces is to use PKEY_CHANGE event as trigger to optionally re-init the device pkey value and re-create all the relevant resources accordingly, if the value of the pkey in index 0 has changed (from invalid to valid or from valid value X to invalid value Y). This patch enhances the heavy flushing code which is triggered by pkey change event, to behave correctly for parent devices. For child devices, the code remains the same, namely chases pkey value and not index. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-18 19:02:32 +08:00
int result;
IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush __ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep complains about locking vlan_rwsem twice (see below). Use down_read_nested instead of down_read to prevent the warning. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc4+ #36 Tainted: G O --------------------------------------------- kworker/u20:2/261 is trying to acquire lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] but task is already holding lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&priv->vlan_rwsem); lock(&priv->vlan_rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u20:2/261: #0: ("%s""ipoib_flush"){.+.+..}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #1: ((&priv->flush_heavy)){+.+...}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #2: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] stack backtrace: CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G O 4.1.0-rc4+ #36 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib] ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001 ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000 ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790 Call Trace: [<ffffffff81665238>] dump_stack+0x4f/0x6f [<ffffffff810bba51>] __lock_acquire+0x741/0x1820 [<ffffffff810bcbf8>] lock_acquire+0xc8/0x240 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffff81669d2c>] down_read+0x4c/0x70 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e4a>] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib] [<ffffffffa07920ba>] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib] [<ffffffff81082871>] process_one_work+0x201/0x760 [<ffffffff810827cc>] ? process_one_work+0x15c/0x760 [<ffffffff81082ef0>] worker_thread+0x120/0x4d0 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81088b7e>] kthread+0xfe/0x120 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8166c6e2>] ret_from_fork+0x42/0x70 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-07 22:45:13 +08:00
down_read_nested(&priv->vlan_rwsem, nesting);
/*
* Flush any child interfaces too -- they might be up even if
* the parent is down.
*/
list_for_each_entry(cpriv, &priv->child_intfs, list)
IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush __ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep complains about locking vlan_rwsem twice (see below). Use down_read_nested instead of down_read to prevent the warning. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc4+ #36 Tainted: G O --------------------------------------------- kworker/u20:2/261 is trying to acquire lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] but task is already holding lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&priv->vlan_rwsem); lock(&priv->vlan_rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u20:2/261: #0: ("%s""ipoib_flush"){.+.+..}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #1: ((&priv->flush_heavy)){+.+...}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #2: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] stack backtrace: CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G O 4.1.0-rc4+ #36 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib] ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001 ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000 ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790 Call Trace: [<ffffffff81665238>] dump_stack+0x4f/0x6f [<ffffffff810bba51>] __lock_acquire+0x741/0x1820 [<ffffffff810bcbf8>] lock_acquire+0xc8/0x240 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffff81669d2c>] down_read+0x4c/0x70 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e4a>] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib] [<ffffffffa07920ba>] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib] [<ffffffff81082871>] process_one_work+0x201/0x760 [<ffffffff810827cc>] ? process_one_work+0x15c/0x760 [<ffffffff81082ef0>] worker_thread+0x120/0x4d0 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81088b7e>] kthread+0xfe/0x120 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8166c6e2>] ret_from_fork+0x42/0x70 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-07 22:45:13 +08:00
__ipoib_ib_dev_flush(cpriv, level, nesting + 1);
IPoIB: Fix deadlock between dev_change_flags() and __ipoib_dev_flush() When ipoib interface is going down it takes all of its children with it, under mutex. For each child, dev_change_flags() is called. That function calls ipoib_stop() via the ndo, and causes flush of the workqueue. Sometimes in the workqueue an __ipoib_dev_flush work() is waiting and when invoked tries to get the same mutex, which leads to a deadlock, as seen below. The solution is to switch to rw-sem instead of mutex. The deadlock: [11028.165303] [<ffffffff812b0977>] ? vgacon_scroll+0x107/0x2e0 [11028.171844] [<ffffffff814eaac5>] schedule_timeout+0x215/0x2e0 [11028.178465] [<ffffffff8105a5c3>] ? perf_event_task_sched_out+0x33/0x80 [11028.185962] [<ffffffff814ea743>] wait_for_common+0x123/0x180 [11028.192491] [<ffffffff8105fa40>] ? default_wake_function+0x0/0x20 [11028.199504] [<ffffffff814ea85d>] wait_for_completion+0x1d/0x20 [11028.206224] [<ffffffff8108b4f1>] flush_cpu_workqueue+0x61/0x90 [11028.212948] [<ffffffff8108b5a0>] ? wq_barrier_func+0x0/0x20 [11028.219375] [<ffffffff8108bfc4>] flush_workqueue+0x54/0x80 [11028.225712] [<ffffffffa05a0576>] ipoib_mcast_stop_thread+0x66/0x90 [ib_ipoib] [11028.233988] [<ffffffffa059ccea>] ipoib_ib_dev_down+0x6a/0x100 [ib_ipoib] [11028.241678] [<ffffffffa059849a>] ipoib_stop+0x8a/0x140 [ib_ipoib] [11028.248692] [<ffffffff8142adf1>] dev_close+0x71/0xc0 [11028.254447] [<ffffffff8142a631>] dev_change_flags+0xa1/0x1d0 [11028.261062] [<ffffffffa059851b>] ipoib_stop+0x10b/0x140 [ib_ipoib] [11028.268172] [<ffffffff8142adf1>] dev_close+0x71/0xc0 [11028.273922] [<ffffffff8142a631>] dev_change_flags+0xa1/0x1d0 [11028.280452] [<ffffffff8148f20b>] devinet_ioctl+0x5eb/0x6a0 [11028.286786] [<ffffffff814903b8>] inet_ioctl+0x88/0xa0 [11028.292633] [<ffffffff8141591a>] sock_ioctl+0x7a/0x280 [11028.298576] [<ffffffff81189012>] vfs_ioctl+0x22/0xa0 [11028.304326] [<ffffffff81140540>] ? unmap_region+0x110/0x130 [11028.310756] [<ffffffff811891b4>] do_vfs_ioctl+0x84/0x580 [11028.316897] [<ffffffff81189731>] sys_ioctl+0x81/0xa0 and 11028.017533] [<ffffffff8105a5c3>] ? perf_event_task_sched_out+0x33/0x80 [11028.025030] [<ffffffff8100bb8e>] ? apic_timer_interrupt+0xe/0x20 [11028.031945] [<ffffffff814eb2ae>] __mutex_lock_slowpath+0x13e/0x180 [11028.039053] [<ffffffff814eb14b>] mutex_lock+0x2b/0x50 [11028.044910] [<ffffffffa059f7e7>] __ipoib_ib_dev_flush+0x37/0x210 [ib_ipoib] [11028.052894] [<ffffffffa059fa00>] ? ipoib_ib_dev_flush_light+0x0/0x20 [ib_ipoib] [11028.061363] [<ffffffffa059fa17>] ipoib_ib_dev_flush_light+0x17/0x20 [ib_ipoib] [11028.069738] [<ffffffff8108b120>] worker_thread+0x170/0x2a0 [11028.076068] [<ffffffff81090990>] ? autoremove_wake_function+0x0/0x40 [11028.083374] [<ffffffff8108afb0>] ? worker_thread+0x0/0x2a0 [11028.089709] [<ffffffff81090626>] kthread+0x96/0xa0 [11028.095266] [<ffffffff8100c0ca>] child_rip+0xa/0x20 [11028.100921] [<ffffffff81090590>] ? kthread+0x0/0xa0 [11028.106573] [<ffffffff8100c0c0>] ? child_rip+0x0/0x20 [11028.112423] INFO: task ifconfig:23640 blocked for more than 120 seconds. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-16 22:37:49 +08:00
up_read(&priv->vlan_rwsem);
if (!test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags) &&
level != IPOIB_FLUSH_HEAVY) {
IB/IPoIB: Allow setting the device address In IB networks, and specifically in IPoIB/rdmacm traffic, the device address of an IPoIB interface is used as a means to exchange information between nodes needed for communication. Currently an IPoIB interface will always be created with a device address based on its node GUID without a way to change that. This change adds the ability to set the device address of an IPoIB interface by value. We use the set mac address ndo to do that. The flow should be broken down to two: 1) The GID value is already in the GID table, in this case the interface will be able to set carrier up. 2) The GID value is not yet in the GID table, in this case the interface won't try to join the multicast group and will wait (listen on GID_CHANGE event) until the GID is inserted. In order to track those changes, we add a new flag: * IPOIB_FLAG_DEV_ADDR_SET. When set, it means the dev_addr is a based on a value in the gid table. this bit will be cleared upon a dev_addr change triggered by the user and set after validation. Per IB spec the port GUID can't change if the module is loaded. port GUID is the basis for GID at index 0 which is the basis for the default device address of a ipoib interface. The issue is that there are devices that don't follow the spec, they change the port GUID while HCA is powered on, so in order not to break userspace applications. We need to check if the user wanted to control the device address and we assume that if he sets the device address back to be based on GID index 0, he no longer wishs to control it. In order to track this, we add an additional flag: * IPOIB_FLAG_DEV_ADDR_CTRL When setting the device address, there is no validation of the upper twelve bytes of the device address (flags, qpn, subnet prefix) as those bytes are not under the control of the user. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-18 21:42:43 +08:00
/* Make sure the dev_addr is set even if not flushing */
if (level == IPOIB_FLUSH_LIGHT)
ipoib_dev_addr_changed_valid(priv);
ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_INITIALIZED not set.\n");
return;
}
if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) {
/* interface is down. update pkey and leave. */
if (level == IPOIB_FLUSH_HEAVY) {
if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags))
update_parent_pkey(priv);
else
update_child_pkey(priv);
IB/IPoIB: Allow setting the device address In IB networks, and specifically in IPoIB/rdmacm traffic, the device address of an IPoIB interface is used as a means to exchange information between nodes needed for communication. Currently an IPoIB interface will always be created with a device address based on its node GUID without a way to change that. This change adds the ability to set the device address of an IPoIB interface by value. We use the set mac address ndo to do that. The flow should be broken down to two: 1) The GID value is already in the GID table, in this case the interface will be able to set carrier up. 2) The GID value is not yet in the GID table, in this case the interface won't try to join the multicast group and will wait (listen on GID_CHANGE event) until the GID is inserted. In order to track those changes, we add a new flag: * IPOIB_FLAG_DEV_ADDR_SET. When set, it means the dev_addr is a based on a value in the gid table. this bit will be cleared upon a dev_addr change triggered by the user and set after validation. Per IB spec the port GUID can't change if the module is loaded. port GUID is the basis for GID at index 0 which is the basis for the default device address of a ipoib interface. The issue is that there are devices that don't follow the spec, they change the port GUID while HCA is powered on, so in order not to break userspace applications. We need to check if the user wanted to control the device address and we assume that if he sets the device address back to be based on GID index 0, he no longer wishs to control it. In order to track this, we add an additional flag: * IPOIB_FLAG_DEV_ADDR_CTRL When setting the device address, there is no validation of the upper twelve bytes of the device address (flags, qpn, subnet prefix) as those bytes are not under the control of the user. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-18 21:42:43 +08:00
} else if (level == IPOIB_FLUSH_LIGHT)
ipoib_dev_addr_changed_valid(priv);
ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_ADMIN_UP not set.\n");
return;
}
if (level == IPOIB_FLUSH_HEAVY) {
IPoIB: Fix pkey change flow for virtualization environments IPoIB's required behaviour w.r.t to the pkey used by the device is the following: - For "parent" interfaces (e.g ib0, ib1, etc) who are created automatically as a result of hot-plug events from the IB core, the driver needs to take whatever pkey vlaue it finds in index 0, and stick to that index. - For child interfaces (e.g ib0.8001, etc) created by admin directive, the driver needs to use and stick to the value provided during its creation. In SR-IOV environment its possible for the VF probe to take place before the cloud management software provisions the suitable pkey for the VF in the paravirtualed PKEY table index 0. When this is the case, the VF IB stack will find in index 0 an invalide pkey, which is all zeros. Moreover, the cloud managment can assign the pkey value at index 0 at any time of the guest life cycle. The correct behavior for IPoIB to address these requirements for parent interfaces is to use PKEY_CHANGE event as trigger to optionally re-init the device pkey value and re-create all the relevant resources accordingly, if the value of the pkey in index 0 has changed (from invalid to valid or from valid value X to invalid value Y). This patch enhances the heavy flushing code which is triggered by pkey change event, to behave correctly for parent devices. For child devices, the code remains the same, namely chases pkey value and not index. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-18 19:02:32 +08:00
/* child devices chase their origin pkey value, while non-child
* (parent) devices should always takes what present in pkey index 0
*/
if (test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
result = update_child_pkey(priv);
if (result) {
/* restart QP only if P_Key index is changed */
IPoIB: Fix pkey change flow for virtualization environments IPoIB's required behaviour w.r.t to the pkey used by the device is the following: - For "parent" interfaces (e.g ib0, ib1, etc) who are created automatically as a result of hot-plug events from the IB core, the driver needs to take whatever pkey vlaue it finds in index 0, and stick to that index. - For child interfaces (e.g ib0.8001, etc) created by admin directive, the driver needs to use and stick to the value provided during its creation. In SR-IOV environment its possible for the VF probe to take place before the cloud management software provisions the suitable pkey for the VF in the paravirtualed PKEY table index 0. When this is the case, the VF IB stack will find in index 0 an invalide pkey, which is all zeros. Moreover, the cloud managment can assign the pkey value at index 0 at any time of the guest life cycle. The correct behavior for IPoIB to address these requirements for parent interfaces is to use PKEY_CHANGE event as trigger to optionally re-init the device pkey value and re-create all the relevant resources accordingly, if the value of the pkey in index 0 has changed (from invalid to valid or from valid value X to invalid value Y). This patch enhances the heavy flushing code which is triggered by pkey change event, to behave correctly for parent devices. For child devices, the code remains the same, namely chases pkey value and not index. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-18 19:02:32 +08:00
ipoib_dbg(priv, "Not flushing - P_Key index not changed.\n");
return;
IPoIB: Fix pkey change flow for virtualization environments IPoIB's required behaviour w.r.t to the pkey used by the device is the following: - For "parent" interfaces (e.g ib0, ib1, etc) who are created automatically as a result of hot-plug events from the IB core, the driver needs to take whatever pkey vlaue it finds in index 0, and stick to that index. - For child interfaces (e.g ib0.8001, etc) created by admin directive, the driver needs to use and stick to the value provided during its creation. In SR-IOV environment its possible for the VF probe to take place before the cloud management software provisions the suitable pkey for the VF in the paravirtualed PKEY table index 0. When this is the case, the VF IB stack will find in index 0 an invalide pkey, which is all zeros. Moreover, the cloud managment can assign the pkey value at index 0 at any time of the guest life cycle. The correct behavior for IPoIB to address these requirements for parent interfaces is to use PKEY_CHANGE event as trigger to optionally re-init the device pkey value and re-create all the relevant resources accordingly, if the value of the pkey in index 0 has changed (from invalid to valid or from valid value X to invalid value Y). This patch enhances the heavy flushing code which is triggered by pkey change event, to behave correctly for parent devices. For child devices, the code remains the same, namely chases pkey value and not index. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-18 19:02:32 +08:00
}
IPoIB: Fix pkey change flow for virtualization environments IPoIB's required behaviour w.r.t to the pkey used by the device is the following: - For "parent" interfaces (e.g ib0, ib1, etc) who are created automatically as a result of hot-plug events from the IB core, the driver needs to take whatever pkey vlaue it finds in index 0, and stick to that index. - For child interfaces (e.g ib0.8001, etc) created by admin directive, the driver needs to use and stick to the value provided during its creation. In SR-IOV environment its possible for the VF probe to take place before the cloud management software provisions the suitable pkey for the VF in the paravirtualed PKEY table index 0. When this is the case, the VF IB stack will find in index 0 an invalide pkey, which is all zeros. Moreover, the cloud managment can assign the pkey value at index 0 at any time of the guest life cycle. The correct behavior for IPoIB to address these requirements for parent interfaces is to use PKEY_CHANGE event as trigger to optionally re-init the device pkey value and re-create all the relevant resources accordingly, if the value of the pkey in index 0 has changed (from invalid to valid or from valid value X to invalid value Y). This patch enhances the heavy flushing code which is triggered by pkey change event, to behave correctly for parent devices. For child devices, the code remains the same, namely chases pkey value and not index. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-18 19:02:32 +08:00
} else {
result = update_parent_pkey(priv);
/* restart QP only if P_Key value changed */
if (result) {
ipoib_dbg(priv, "Not flushing - P_Key value not changed.\n");
return;
}
}
}
if (level == IPOIB_FLUSH_LIGHT) {
IB/ipoib: Don't allow MC joins during light MC flush This fix solves a race between light flush and on the fly joins. Light flush doesn't set the device to down and unset IPOIB_OPER_UP flag, this means that if while flushing we have a MC join in progress and the QP was attached to BC MGID we can have a mismatches when re-attaching a QP to the BC MGID. The light flush would set the broadcast group to NULL causing an on the fly join to rejoin and reattach to the BC MCG as well as adding the BC MGID to the multicast list. The flush process would later on remove the BC MGID and detach it from the QP. On the next flush the BC MGID is present in the multicast list but not found when trying to detach it because of the previous double attach and single detach. [18332.714265] ------------[ cut here ]------------ [18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core] ... [18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 [18332.779411] 0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000 [18332.784960] 0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300 [18332.790547] ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280 [18332.796199] Call Trace: [18332.798015] [<ffffffff813fed47>] dump_stack+0x63/0x8c [18332.801831] [<ffffffff8109add1>] __warn+0xd1/0xf0 [18332.805403] [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20 [18332.809706] [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core] [18332.814384] [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib] [18332.820031] [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib] [18332.825220] [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib] [18332.830290] [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib] [18332.834911] [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0 [18332.839741] [<ffffffff81772bd1>] rollback_registered+0x31/0x40 [18332.844091] [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80 [18332.848880] [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib] [18332.853848] [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib] [18332.858474] [<ffffffff81520c08>] dev_attr_store+0x18/0x30 [18332.862510] [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50 [18332.866349] [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170 [18332.870471] [<ffffffff81207198>] __vfs_write+0x28/0xe0 [18332.874152] [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50 [18332.878274] [<ffffffff81208062>] vfs_write+0xa2/0x1a0 [18332.881896] [<ffffffff812093a6>] SyS_write+0x46/0xa0 [18332.885632] [<ffffffff810039b7>] do_syscall_64+0x57/0xb0 [18332.889709] [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25 [18332.894727] ---[ end trace 09ebbe31f831ef17 ]--- Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-12 14:55:28 +08:00
int oper_up;
ipoib_mark_paths_invalid(dev);
IB/ipoib: Don't allow MC joins during light MC flush This fix solves a race between light flush and on the fly joins. Light flush doesn't set the device to down and unset IPOIB_OPER_UP flag, this means that if while flushing we have a MC join in progress and the QP was attached to BC MGID we can have a mismatches when re-attaching a QP to the BC MGID. The light flush would set the broadcast group to NULL causing an on the fly join to rejoin and reattach to the BC MCG as well as adding the BC MGID to the multicast list. The flush process would later on remove the BC MGID and detach it from the QP. On the next flush the BC MGID is present in the multicast list but not found when trying to detach it because of the previous double attach and single detach. [18332.714265] ------------[ cut here ]------------ [18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core] ... [18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 [18332.779411] 0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000 [18332.784960] 0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300 [18332.790547] ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280 [18332.796199] Call Trace: [18332.798015] [<ffffffff813fed47>] dump_stack+0x63/0x8c [18332.801831] [<ffffffff8109add1>] __warn+0xd1/0xf0 [18332.805403] [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20 [18332.809706] [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core] [18332.814384] [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib] [18332.820031] [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib] [18332.825220] [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib] [18332.830290] [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib] [18332.834911] [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0 [18332.839741] [<ffffffff81772bd1>] rollback_registered+0x31/0x40 [18332.844091] [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80 [18332.848880] [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib] [18332.853848] [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib] [18332.858474] [<ffffffff81520c08>] dev_attr_store+0x18/0x30 [18332.862510] [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50 [18332.866349] [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170 [18332.870471] [<ffffffff81207198>] __vfs_write+0x28/0xe0 [18332.874152] [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50 [18332.878274] [<ffffffff81208062>] vfs_write+0xa2/0x1a0 [18332.881896] [<ffffffff812093a6>] SyS_write+0x46/0xa0 [18332.885632] [<ffffffff810039b7>] do_syscall_64+0x57/0xb0 [18332.889709] [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25 [18332.894727] ---[ end trace 09ebbe31f831ef17 ]--- Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-12 14:55:28 +08:00
/* Set IPoIB operation as down to prevent races between:
* the flush flow which leaves MCG and on the fly joins
* which can happen during that time. mcast restart task
* should deal with join requests we missed.
*/
oper_up = test_and_clear_bit(IPOIB_FLAG_OPER_UP, &priv->flags);
ipoib_mcast_dev_flush(dev);
IB/ipoib: Don't allow MC joins during light MC flush This fix solves a race between light flush and on the fly joins. Light flush doesn't set the device to down and unset IPOIB_OPER_UP flag, this means that if while flushing we have a MC join in progress and the QP was attached to BC MGID we can have a mismatches when re-attaching a QP to the BC MGID. The light flush would set the broadcast group to NULL causing an on the fly join to rejoin and reattach to the BC MCG as well as adding the BC MGID to the multicast list. The flush process would later on remove the BC MGID and detach it from the QP. On the next flush the BC MGID is present in the multicast list but not found when trying to detach it because of the previous double attach and single detach. [18332.714265] ------------[ cut here ]------------ [18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core] ... [18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 [18332.779411] 0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000 [18332.784960] 0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300 [18332.790547] ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280 [18332.796199] Call Trace: [18332.798015] [<ffffffff813fed47>] dump_stack+0x63/0x8c [18332.801831] [<ffffffff8109add1>] __warn+0xd1/0xf0 [18332.805403] [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20 [18332.809706] [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core] [18332.814384] [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib] [18332.820031] [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib] [18332.825220] [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib] [18332.830290] [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib] [18332.834911] [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0 [18332.839741] [<ffffffff81772bd1>] rollback_registered+0x31/0x40 [18332.844091] [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80 [18332.848880] [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib] [18332.853848] [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib] [18332.858474] [<ffffffff81520c08>] dev_attr_store+0x18/0x30 [18332.862510] [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50 [18332.866349] [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170 [18332.870471] [<ffffffff81207198>] __vfs_write+0x28/0xe0 [18332.874152] [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50 [18332.878274] [<ffffffff81208062>] vfs_write+0xa2/0x1a0 [18332.881896] [<ffffffff812093a6>] SyS_write+0x46/0xa0 [18332.885632] [<ffffffff810039b7>] do_syscall_64+0x57/0xb0 [18332.889709] [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25 [18332.894727] ---[ end trace 09ebbe31f831ef17 ]--- Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-12 14:55:28 +08:00
if (oper_up)
set_bit(IPOIB_FLAG_OPER_UP, &priv->flags);
ipoib_flush_ah(dev);
}
if (level >= IPOIB_FLUSH_NORMAL)
ipoib_ib_dev_down(dev);
if (level == IPOIB_FLUSH_HEAVY) {
if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
ipoib_ib_dev_stop(dev);
if (ipoib_ib_dev_open(dev) != 0)
return;
if (netif_queue_stopped(dev))
netif_start_queue(dev);
}
/*
* The device could have been brought down between the start and when
* we get here, don't bring it back up if it's not configured up
*/
if (test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) {
if (level >= IPOIB_FLUSH_NORMAL)
ipoib_ib_dev_up(dev);
IB/IPoIB: Allow setting the device address In IB networks, and specifically in IPoIB/rdmacm traffic, the device address of an IPoIB interface is used as a means to exchange information between nodes needed for communication. Currently an IPoIB interface will always be created with a device address based on its node GUID without a way to change that. This change adds the ability to set the device address of an IPoIB interface by value. We use the set mac address ndo to do that. The flow should be broken down to two: 1) The GID value is already in the GID table, in this case the interface will be able to set carrier up. 2) The GID value is not yet in the GID table, in this case the interface won't try to join the multicast group and will wait (listen on GID_CHANGE event) until the GID is inserted. In order to track those changes, we add a new flag: * IPOIB_FLAG_DEV_ADDR_SET. When set, it means the dev_addr is a based on a value in the gid table. this bit will be cleared upon a dev_addr change triggered by the user and set after validation. Per IB spec the port GUID can't change if the module is loaded. port GUID is the basis for GID at index 0 which is the basis for the default device address of a ipoib interface. The issue is that there are devices that don't follow the spec, they change the port GUID while HCA is powered on, so in order not to break userspace applications. We need to check if the user wanted to control the device address and we assume that if he sets the device address back to be based on GID index 0, he no longer wishs to control it. In order to track this, we add an additional flag: * IPOIB_FLAG_DEV_ADDR_CTRL When setting the device address, there is no validation of the upper twelve bytes of the device address (flags, qpn, subnet prefix) as those bytes are not under the control of the user. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-18 21:42:43 +08:00
if (ipoib_dev_addr_changed_valid(priv))
ipoib_mcast_restart_task(&priv->restart_task);
}
}
void ipoib_ib_dev_flush_light(struct work_struct *work)
{
struct ipoib_dev_priv *priv =
container_of(work, struct ipoib_dev_priv, flush_light);
IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush __ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep complains about locking vlan_rwsem twice (see below). Use down_read_nested instead of down_read to prevent the warning. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc4+ #36 Tainted: G O --------------------------------------------- kworker/u20:2/261 is trying to acquire lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] but task is already holding lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&priv->vlan_rwsem); lock(&priv->vlan_rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u20:2/261: #0: ("%s""ipoib_flush"){.+.+..}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #1: ((&priv->flush_heavy)){+.+...}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #2: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] stack backtrace: CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G O 4.1.0-rc4+ #36 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib] ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001 ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000 ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790 Call Trace: [<ffffffff81665238>] dump_stack+0x4f/0x6f [<ffffffff810bba51>] __lock_acquire+0x741/0x1820 [<ffffffff810bcbf8>] lock_acquire+0xc8/0x240 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffff81669d2c>] down_read+0x4c/0x70 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e4a>] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib] [<ffffffffa07920ba>] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib] [<ffffffff81082871>] process_one_work+0x201/0x760 [<ffffffff810827cc>] ? process_one_work+0x15c/0x760 [<ffffffff81082ef0>] worker_thread+0x120/0x4d0 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81088b7e>] kthread+0xfe/0x120 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8166c6e2>] ret_from_fork+0x42/0x70 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-07 22:45:13 +08:00
__ipoib_ib_dev_flush(priv, IPOIB_FLUSH_LIGHT, 0);
}
void ipoib_ib_dev_flush_normal(struct work_struct *work)
{
struct ipoib_dev_priv *priv =
container_of(work, struct ipoib_dev_priv, flush_normal);
IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush __ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep complains about locking vlan_rwsem twice (see below). Use down_read_nested instead of down_read to prevent the warning. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc4+ #36 Tainted: G O --------------------------------------------- kworker/u20:2/261 is trying to acquire lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] but task is already holding lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&priv->vlan_rwsem); lock(&priv->vlan_rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u20:2/261: #0: ("%s""ipoib_flush"){.+.+..}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #1: ((&priv->flush_heavy)){+.+...}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #2: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] stack backtrace: CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G O 4.1.0-rc4+ #36 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib] ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001 ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000 ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790 Call Trace: [<ffffffff81665238>] dump_stack+0x4f/0x6f [<ffffffff810bba51>] __lock_acquire+0x741/0x1820 [<ffffffff810bcbf8>] lock_acquire+0xc8/0x240 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffff81669d2c>] down_read+0x4c/0x70 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e4a>] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib] [<ffffffffa07920ba>] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib] [<ffffffff81082871>] process_one_work+0x201/0x760 [<ffffffff810827cc>] ? process_one_work+0x15c/0x760 [<ffffffff81082ef0>] worker_thread+0x120/0x4d0 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81088b7e>] kthread+0xfe/0x120 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8166c6e2>] ret_from_fork+0x42/0x70 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-07 22:45:13 +08:00
__ipoib_ib_dev_flush(priv, IPOIB_FLUSH_NORMAL, 0);
}
void ipoib_ib_dev_flush_heavy(struct work_struct *work)
{
struct ipoib_dev_priv *priv =
container_of(work, struct ipoib_dev_priv, flush_heavy);
IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush __ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep complains about locking vlan_rwsem twice (see below). Use down_read_nested instead of down_read to prevent the warning. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc4+ #36 Tainted: G O --------------------------------------------- kworker/u20:2/261 is trying to acquire lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] but task is already holding lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&priv->vlan_rwsem); lock(&priv->vlan_rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u20:2/261: #0: ("%s""ipoib_flush"){.+.+..}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #1: ((&priv->flush_heavy)){+.+...}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #2: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] stack backtrace: CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G O 4.1.0-rc4+ #36 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib] ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001 ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000 ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790 Call Trace: [<ffffffff81665238>] dump_stack+0x4f/0x6f [<ffffffff810bba51>] __lock_acquire+0x741/0x1820 [<ffffffff810bcbf8>] lock_acquire+0xc8/0x240 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffff81669d2c>] down_read+0x4c/0x70 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e4a>] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib] [<ffffffffa07920ba>] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib] [<ffffffff81082871>] process_one_work+0x201/0x760 [<ffffffff810827cc>] ? process_one_work+0x15c/0x760 [<ffffffff81082ef0>] worker_thread+0x120/0x4d0 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81088b7e>] kthread+0xfe/0x120 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8166c6e2>] ret_from_fork+0x42/0x70 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-07 22:45:13 +08:00
__ipoib_ib_dev_flush(priv, IPOIB_FLUSH_HEAVY, 0);
}
void ipoib_ib_dev_cleanup(struct net_device *dev)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
ipoib_dbg(priv, "cleaning up ib_dev\n");
/*
* We must make sure there are no more (path) completions
* that may wish to touch priv fields that are no longer valid
*/
ipoib_flush_paths(dev);
ipoib_mcast_stop_thread(dev);
ipoib_mcast_dev_flush(dev);
/*
* All of our ah references aren't free until after
* ipoib_mcast_dev_flush(), ipoib_flush_paths, and
* the neighbor garbage collection is stopped and reaped.
* That should all be done now, so make a final ah flush.
*/
ipoib_stop_ah(dev);
clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
priv->rn_ops->ndo_uninit(dev);
if (priv->pd) {
ib_dealloc_pd(priv->pd);
priv->pd = NULL;
}
}