linux/drivers/base/bus.c

1061 lines
26 KiB
C
Raw Normal View History

/*
* bus.c - bus driver management
*
* Copyright (c) 2002-3 Patrick Mochel
* Copyright (c) 2002-3 Open Source Development Labs
* Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de>
* Copyright (c) 2007 Novell Inc.
*
* This file is released under the GPLv2
*
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/errno.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/string.h>
#include "base.h"
#include "power/power.h"
#define to_bus_attr(_attr) container_of(_attr, struct bus_attribute, attr)
#define to_bus(obj) container_of(obj, struct bus_type_private, subsys.kobj)
/*
* sysfs bindings for drivers
*/
#define to_drv_attr(_attr) container_of(_attr, struct driver_attribute, attr)
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
static int __must_check bus_rescan_devices_helper(struct device *dev,
void *data);
static struct bus_type *bus_get(struct bus_type *bus)
{
if (bus) {
kset_get(&bus->p->subsys);
return bus;
}
return NULL;
}
static void bus_put(struct bus_type *bus)
{
if (bus)
kset_put(&bus->p->subsys);
}
static ssize_t drv_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
{
struct driver_attribute *drv_attr = to_drv_attr(attr);
struct driver_private *drv_priv = to_driver(kobj);
ssize_t ret = -EIO;
if (drv_attr->show)
ret = drv_attr->show(drv_priv->driver, buf);
return ret;
}
static ssize_t drv_attr_store(struct kobject *kobj, struct attribute *attr,
const char *buf, size_t count)
{
struct driver_attribute *drv_attr = to_drv_attr(attr);
struct driver_private *drv_priv = to_driver(kobj);
ssize_t ret = -EIO;
if (drv_attr->store)
ret = drv_attr->store(drv_priv->driver, buf, count);
return ret;
}
static const struct sysfs_ops driver_sysfs_ops = {
.show = drv_attr_show,
.store = drv_attr_store,
};
static void driver_release(struct kobject *kobj)
{
struct driver_private *drv_priv = to_driver(kobj);
pr_debug("driver: '%s': %s\n", kobject_name(kobj), __func__);
kfree(drv_priv);
}
static struct kobj_type driver_ktype = {
.sysfs_ops = &driver_sysfs_ops,
.release = driver_release,
};
/*
* sysfs bindings for buses
*/
static ssize_t bus_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
{
struct bus_attribute *bus_attr = to_bus_attr(attr);
struct bus_type_private *bus_priv = to_bus(kobj);
ssize_t ret = 0;
if (bus_attr->show)
ret = bus_attr->show(bus_priv->bus, buf);
return ret;
}
static ssize_t bus_attr_store(struct kobject *kobj, struct attribute *attr,
const char *buf, size_t count)
{
struct bus_attribute *bus_attr = to_bus_attr(attr);
struct bus_type_private *bus_priv = to_bus(kobj);
ssize_t ret = 0;
if (bus_attr->store)
ret = bus_attr->store(bus_priv->bus, buf, count);
return ret;
}
static const struct sysfs_ops bus_sysfs_ops = {
.show = bus_attr_show,
.store = bus_attr_store,
};
int bus_create_file(struct bus_type *bus, struct bus_attribute *attr)
{
int error;
if (bus_get(bus)) {
error = sysfs_create_file(&bus->p->subsys.kobj, &attr->attr);
bus_put(bus);
} else
error = -EINVAL;
return error;
}
EXPORT_SYMBOL_GPL(bus_create_file);
void bus_remove_file(struct bus_type *bus, struct bus_attribute *attr)
{
if (bus_get(bus)) {
sysfs_remove_file(&bus->p->subsys.kobj, &attr->attr);
bus_put(bus);
}
}
EXPORT_SYMBOL_GPL(bus_remove_file);
static struct kobj_type bus_ktype = {
.sysfs_ops = &bus_sysfs_ops,
};
static int bus_uevent_filter(struct kset *kset, struct kobject *kobj)
{
struct kobj_type *ktype = get_ktype(kobj);
if (ktype == &bus_ktype)
return 1;
return 0;
}
static const struct kset_uevent_ops bus_uevent_ops = {
.filter = bus_uevent_filter,
};
static struct kset *bus_kset;
#ifdef CONFIG_HOTPLUG
/* Manually detach a device from its associated driver. */
static ssize_t driver_unbind(struct device_driver *drv,
const char *buf, size_t count)
{
struct bus_type *bus = bus_get(drv->bus);
struct device *dev;
int err = -ENODEV;
dev = bus_find_device_by_name(bus, NULL, buf);
if (dev && dev->driver == drv) {
[PATCH] Hold the device's parent's lock during probe and remove This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 05:54:12 +08:00
if (dev->parent) /* Needed for USB */
Driver core: create lock/unlock functions for struct device In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-18 02:57:05 +08:00
device_lock(dev->parent);
device_release_driver(dev);
[PATCH] Hold the device's parent's lock during probe and remove This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 05:54:12 +08:00
if (dev->parent)
Driver core: create lock/unlock functions for struct device In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-18 02:57:05 +08:00
device_unlock(dev->parent);
err = count;
}
put_device(dev);
bus_put(bus);
return err;
}
static DRIVER_ATTR(unbind, S_IWUSR, NULL, driver_unbind);
/*
* Manually attach a device to a driver.
* Note: the driver must want to bind to the device,
* it is not possible to override the driver's id table.
*/
static ssize_t driver_bind(struct device_driver *drv,
const char *buf, size_t count)
{
struct bus_type *bus = bus_get(drv->bus);
struct device *dev;
int err = -ENODEV;
dev = bus_find_device_by_name(bus, NULL, buf);
if (dev && dev->driver == NULL && driver_match_device(drv, dev)) {
[PATCH] Hold the device's parent's lock during probe and remove This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 05:54:12 +08:00
if (dev->parent) /* Needed for USB */
Driver core: create lock/unlock functions for struct device In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-18 02:57:05 +08:00
device_lock(dev->parent);
device_lock(dev);
err = driver_probe_device(drv, dev);
Driver core: create lock/unlock functions for struct device In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-18 02:57:05 +08:00
device_unlock(dev);
[PATCH] Hold the device's parent's lock during probe and remove This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 05:54:12 +08:00
if (dev->parent)
Driver core: create lock/unlock functions for struct device In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-18 02:57:05 +08:00
device_unlock(dev->parent);
if (err > 0) {
/* success */
err = count;
} else if (err == 0) {
/* driver didn't accept device */
err = -ENODEV;
}
}
put_device(dev);
bus_put(bus);
return err;
}
static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
static ssize_t show_drivers_autoprobe(struct bus_type *bus, char *buf)
{
return sprintf(buf, "%d\n", bus->p->drivers_autoprobe);
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
}
static ssize_t store_drivers_autoprobe(struct bus_type *bus,
const char *buf, size_t count)
{
if (buf[0] == '0')
bus->p->drivers_autoprobe = 0;
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
else
bus->p->drivers_autoprobe = 1;
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
return count;
}
static ssize_t store_drivers_probe(struct bus_type *bus,
const char *buf, size_t count)
{
struct device *dev;
dev = bus_find_device_by_name(bus, NULL, buf);
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
if (!dev)
return -ENODEV;
if (bus_rescan_devices_helper(dev, NULL) != 0)
return -EINVAL;
return count;
}
#endif
static struct device *next_device(struct klist_iter *i)
{
struct klist_node *n = klist_next(i);
struct device *dev = NULL;
struct device_private *dev_prv;
if (n) {
dev_prv = to_device_private_bus(n);
dev = dev_prv->device;
}
return dev;
}
/**
* bus_for_each_dev - device iterator.
* @bus: bus type.
* @start: device to start iterating from.
* @data: data for the callback.
* @fn: function to be called for each device.
*
* Iterate over @bus's list of devices, and call @fn for each,
* passing it @data. If @start is not NULL, we use that device to
* begin iterating from.
*
* We check the return of @fn each time. If it returns anything
* other than 0, we break out and return that value.
*
* NOTE: The device that returns a non-zero value is not retained
* in any way, nor is its refcount incremented. If the caller needs
* to retain this data, it should do so, and increment the reference
* count in the supplied callback.
*/
int bus_for_each_dev(struct bus_type *bus, struct device *start,
void *data, int (*fn)(struct device *, void *))
{
struct klist_iter i;
struct device *dev;
int error = 0;
if (!bus)
return -EINVAL;
klist_iter_init_node(&bus->p->klist_devices, &i,
(start ? &start->p->knode_bus : NULL));
while ((dev = next_device(&i)) && !error)
error = fn(dev, data);
klist_iter_exit(&i);
return error;
}
EXPORT_SYMBOL_GPL(bus_for_each_dev);
/**
* bus_find_device - device iterator for locating a particular device.
* @bus: bus type
* @start: Device to begin with
* @data: Data to pass to match function
* @match: Callback function to check device
*
* This is similar to the bus_for_each_dev() function above, but it
* returns a reference to a device that is 'found' for later use, as
* determined by the @match callback.
*
* The callback should return 0 if the device doesn't match and non-zero
* if it does. If the callback returns non-zero, this function will
* return to the caller and not iterate over any more devices.
*/
struct device *bus_find_device(struct bus_type *bus,
struct device *start, void *data,
int (*match)(struct device *dev, void *data))
{
struct klist_iter i;
struct device *dev;
if (!bus)
return NULL;
klist_iter_init_node(&bus->p->klist_devices, &i,
(start ? &start->p->knode_bus : NULL));
while ((dev = next_device(&i)))
if (match(dev, data) && get_device(dev))
break;
klist_iter_exit(&i);
return dev;
}
EXPORT_SYMBOL_GPL(bus_find_device);
static int match_name(struct device *dev, void *data)
{
const char *name = data;
return sysfs_streq(name, dev_name(dev));
}
/**
* bus_find_device_by_name - device iterator for locating a particular device of a specific name
* @bus: bus type
* @start: Device to begin with
* @name: name of the device to match
*
* This is similar to the bus_find_device() function above, but it handles
* searching by a name automatically, no need to write another strcmp matching
* function.
*/
struct device *bus_find_device_by_name(struct bus_type *bus,
struct device *start, const char *name)
{
return bus_find_device(bus, start, (void *)name, match_name);
}
EXPORT_SYMBOL_GPL(bus_find_device_by_name);
static struct device_driver *next_driver(struct klist_iter *i)
{
struct klist_node *n = klist_next(i);
struct driver_private *drv_priv;
if (n) {
drv_priv = container_of(n, struct driver_private, knode_bus);
return drv_priv->driver;
}
return NULL;
}
/**
* bus_for_each_drv - driver iterator
* @bus: bus we're dealing with.
* @start: driver to start iterating on.
* @data: data to pass to the callback.
* @fn: function to call for each driver.
*
* This is nearly identical to the device iterator above.
* We iterate over each driver that belongs to @bus, and call
* @fn for each. If @fn returns anything but 0, we break out
* and return it. If @start is not NULL, we use it as the head
* of the list.
*
* NOTE: we don't return the driver that returns a non-zero
* value, nor do we leave the reference count incremented for that
* driver. If the caller needs to know that info, it must set it
* in the callback. It must also be sure to increment the refcount
* so it doesn't disappear before returning to the caller.
*/
int bus_for_each_drv(struct bus_type *bus, struct device_driver *start,
void *data, int (*fn)(struct device_driver *, void *))
{
struct klist_iter i;
struct device_driver *drv;
int error = 0;
if (!bus)
return -EINVAL;
klist_iter_init_node(&bus->p->klist_drivers, &i,
start ? &start->p->knode_bus : NULL);
while ((drv = next_driver(&i)) && !error)
error = fn(drv, data);
klist_iter_exit(&i);
return error;
}
EXPORT_SYMBOL_GPL(bus_for_each_drv);
static int device_add_attrs(struct bus_type *bus, struct device *dev)
{
int error = 0;
int i;
if (!bus->dev_attrs)
return 0;
for (i = 0; attr_name(bus->dev_attrs[i]); i++) {
error = device_create_file(dev, &bus->dev_attrs[i]);
if (error) {
while (--i >= 0)
device_remove_file(dev, &bus->dev_attrs[i]);
break;
}
}
return error;
}
static void device_remove_attrs(struct bus_type *bus, struct device *dev)
{
int i;
if (bus->dev_attrs) {
for (i = 0; attr_name(bus->dev_attrs[i]); i++)
device_remove_file(dev, &bus->dev_attrs[i]);
}
}
#ifdef CONFIG_SYSFS_DEPRECATED
static int make_deprecated_bus_links(struct device *dev)
{
return sysfs_create_link(&dev->kobj,
&dev->bus->p->subsys.kobj, "bus");
}
static void remove_deprecated_bus_links(struct device *dev)
{
sysfs_remove_link(&dev->kobj, "bus");
}
#else
static inline int make_deprecated_bus_links(struct device *dev) { return 0; }
static inline void remove_deprecated_bus_links(struct device *dev) { }
#endif
/**
* bus_add_device - add device to bus
* @dev: device being added
*
* - Add device's bus attributes.
* - Create links to device's bus.
* - Add the device to its bus's list of devices.
*/
int bus_add_device(struct device *dev)
{
struct bus_type *bus = bus_get(dev->bus);
int error = 0;
if (bus) {
pr_debug("bus: '%s': add device %s\n", bus->name, dev_name(dev));
error = device_add_attrs(bus, dev);
if (error)
goto out_put;
error = sysfs_create_link(&bus->p->devices_kset->kobj,
&dev->kobj, dev_name(dev));
if (error)
goto out_id;
error = sysfs_create_link(&dev->kobj,
&dev->bus->p->subsys.kobj, "subsystem");
if (error)
goto out_subsys;
error = make_deprecated_bus_links(dev);
if (error)
goto out_deprecated;
klist_add_tail(&dev->p->knode_bus, &bus->p->klist_devices);
}
return 0;
out_deprecated:
sysfs_remove_link(&dev->kobj, "subsystem");
out_subsys:
sysfs_remove_link(&bus->p->devices_kset->kobj, dev_name(dev));
out_id:
device_remove_attrs(bus, dev);
out_put:
bus_put(dev->bus);
return error;
}
/**
* bus_probe_device - probe drivers for a new device
* @dev: device to probe
*
* - Automatically probe for a driver if the bus allows it.
*/
void bus_probe_device(struct device *dev)
{
struct bus_type *bus = dev->bus;
int ret;
if (bus && bus->p->drivers_autoprobe) {
ret = device_attach(dev);
WARN_ON(ret < 0);
}
}
/**
* bus_remove_device - remove device from bus
* @dev: device to be removed
*
* - Remove symlink from bus's directory.
* - Delete device from bus's list.
* - Detach from its driver.
* - Drop reference taken in bus_add_device().
*/
void bus_remove_device(struct device *dev)
{
if (dev->bus) {
sysfs_remove_link(&dev->kobj, "subsystem");
remove_deprecated_bus_links(dev);
sysfs_remove_link(&dev->bus->p->devices_kset->kobj,
dev_name(dev));
device_remove_attrs(dev->bus, dev);
if (klist_node_attached(&dev->p->knode_bus))
klist_del(&dev->p->knode_bus);
pr_debug("bus: '%s': remove device %s\n",
dev->bus->name, dev_name(dev));
device_release_driver(dev);
bus_put(dev->bus);
}
}
static int driver_add_attrs(struct bus_type *bus, struct device_driver *drv)
{
int error = 0;
int i;
if (bus->drv_attrs) {
for (i = 0; attr_name(bus->drv_attrs[i]); i++) {
error = driver_create_file(drv, &bus->drv_attrs[i]);
if (error)
goto err;
}
}
done:
return error;
err:
while (--i >= 0)
driver_remove_file(drv, &bus->drv_attrs[i]);
goto done;
}
static void driver_remove_attrs(struct bus_type *bus,
struct device_driver *drv)
{
int i;
if (bus->drv_attrs) {
for (i = 0; attr_name(bus->drv_attrs[i]); i++)
driver_remove_file(drv, &bus->drv_attrs[i]);
}
}
#ifdef CONFIG_HOTPLUG
/*
* Thanks to drivers making their tables __devinit, we can't allow manual
* bind and unbind from userspace unless CONFIG_HOTPLUG is enabled.
*/
static int __must_check add_bind_files(struct device_driver *drv)
{
int ret;
ret = driver_create_file(drv, &driver_attr_unbind);
if (ret == 0) {
ret = driver_create_file(drv, &driver_attr_bind);
if (ret)
driver_remove_file(drv, &driver_attr_unbind);
}
return ret;
}
static void remove_bind_files(struct device_driver *drv)
{
driver_remove_file(drv, &driver_attr_bind);
driver_remove_file(drv, &driver_attr_unbind);
}
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
static BUS_ATTR(drivers_probe, S_IWUSR, NULL, store_drivers_probe);
static BUS_ATTR(drivers_autoprobe, S_IWUSR | S_IRUGO,
show_drivers_autoprobe, store_drivers_autoprobe);
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
static int add_probe_files(struct bus_type *bus)
{
int retval;
retval = bus_create_file(bus, &bus_attr_drivers_probe);
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
if (retval)
goto out;
retval = bus_create_file(bus, &bus_attr_drivers_autoprobe);
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
if (retval)
bus_remove_file(bus, &bus_attr_drivers_probe);
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
out:
return retval;
}
static void remove_probe_files(struct bus_type *bus)
{
bus_remove_file(bus, &bus_attr_drivers_autoprobe);
bus_remove_file(bus, &bus_attr_drivers_probe);
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
}
#else
static inline int add_bind_files(struct device_driver *drv) { return 0; }
static inline void remove_bind_files(struct device_driver *drv) {}
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
static inline int add_probe_files(struct bus_type *bus) { return 0; }
static inline void remove_probe_files(struct bus_type *bus) {}
#endif
static ssize_t driver_uevent_store(struct device_driver *drv,
const char *buf, size_t count)
{
enum kobject_action action;
if (kobject_action_type(buf, count, &action) == 0)
kobject_uevent(&drv->p->kobj, action);
return count;
}
static DRIVER_ATTR(uevent, S_IWUSR, NULL, driver_uevent_store);
/**
* bus_add_driver - Add a driver to the bus.
* @drv: driver.
*/
int bus_add_driver(struct device_driver *drv)
{
struct bus_type *bus;
struct driver_private *priv;
int error = 0;
bus = bus_get(drv->bus);
if (!bus)
return -EINVAL;
pr_debug("bus: '%s': add driver %s\n", bus->name, drv->name);
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
error = -ENOMEM;
goto out_put_bus;
}
klist_init(&priv->klist_devices, NULL, NULL);
priv->driver = drv;
drv->p = priv;
priv->kobj.kset = bus->p->drivers_kset;
error = kobject_init_and_add(&priv->kobj, &driver_ktype, NULL,
"%s", drv->name);
if (error)
goto out_unregister;
if (drv->bus->p->drivers_autoprobe) {
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
error = driver_attach(drv);
if (error)
goto out_unregister;
}
klist_add_tail(&priv->knode_bus, &bus->p->klist_drivers);
module_add_driver(drv->owner, drv);
error = driver_create_file(drv, &driver_attr_uevent);
if (error) {
printk(KERN_ERR "%s: uevent attr (%s) failed\n",
__func__, drv->name);
}
error = driver_add_attrs(bus, drv);
if (error) {
/* How the hell do we get out of this pickle? Give up */
printk(KERN_ERR "%s: driver_add_attrs(%s) failed\n",
__func__, drv->name);
}
if (!drv->suppress_bind_attrs) {
error = add_bind_files(drv);
if (error) {
/* Ditto */
printk(KERN_ERR "%s: add_bind_files(%s) failed\n",
__func__, drv->name);
}
}
kobject_uevent(&priv->kobj, KOBJ_ADD);
return 0;
out_unregister:
kobject_put(&priv->kobj);
kfree(drv->p);
drv->p = NULL;
out_put_bus:
bus_put(bus);
return error;
}
/**
* bus_remove_driver - delete driver from bus's knowledge.
* @drv: driver.
*
* Detach the driver from the devices it controls, and remove
* it from its bus's list of drivers. Finally, we drop the reference
* to the bus we took in bus_add_driver().
*/
void bus_remove_driver(struct device_driver *drv)
{
if (!drv->bus)
return;
if (!drv->suppress_bind_attrs)
remove_bind_files(drv);
driver_remove_attrs(drv->bus, drv);
driver_remove_file(drv, &driver_attr_uevent);
klist_remove(&drv->p->knode_bus);
pr_debug("bus: '%s': remove driver %s\n", drv->bus->name, drv->name);
driver_detach(drv);
module_remove_driver(drv);
kobject_put(&drv->p->kobj);
bus_put(drv->bus);
}
/* Helper for bus_rescan_devices's iter */
static int __must_check bus_rescan_devices_helper(struct device *dev,
void *data)
{
int ret = 0;
[PATCH] Hold the device's parent's lock during probe and remove This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 05:54:12 +08:00
if (!dev->driver) {
if (dev->parent) /* Needed for USB */
Driver core: create lock/unlock functions for struct device In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-18 02:57:05 +08:00
device_lock(dev->parent);
ret = device_attach(dev);
[PATCH] Hold the device's parent's lock during probe and remove This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 05:54:12 +08:00
if (dev->parent)
Driver core: create lock/unlock functions for struct device In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-18 02:57:05 +08:00
device_unlock(dev->parent);
[PATCH] Hold the device's parent's lock during probe and remove This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 05:54:12 +08:00
}
return ret < 0 ? ret : 0;
}
/**
* bus_rescan_devices - rescan devices on the bus for possible drivers
* @bus: the bus to scan.
*
* This function will look for devices on the bus with no driver
* attached and rescan it against existing drivers to see if it matches
* any by calling device_attach() for the unbound devices.
*/
int bus_rescan_devices(struct bus_type *bus)
{
return bus_for_each_dev(bus, NULL, NULL, bus_rescan_devices_helper);
}
EXPORT_SYMBOL_GPL(bus_rescan_devices);
/**
* device_reprobe - remove driver for a device and probe for a new driver
* @dev: the device to reprobe
*
* This function detaches the attached driver (if any) for the given
* device and restarts the driver probing process. It is intended
* to use if probing criteria changed during a devices lifetime and
* driver attachment should change accordingly.
*/
int device_reprobe(struct device *dev)
{
if (dev->driver) {
if (dev->parent) /* Needed for USB */
Driver core: create lock/unlock functions for struct device In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-18 02:57:05 +08:00
device_lock(dev->parent);
device_release_driver(dev);
if (dev->parent)
Driver core: create lock/unlock functions for struct device In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-18 02:57:05 +08:00
device_unlock(dev->parent);
}
return bus_rescan_devices_helper(dev, NULL);
}
EXPORT_SYMBOL_GPL(device_reprobe);
/**
* find_bus - locate bus by name.
* @name: name of bus.
*
* Call kset_find_obj() to iterate over list of buses to
* find a bus by name. Return bus if found.
*
* Note that kset_find_obj increments bus' reference count.
*/
#if 0
struct bus_type *find_bus(char *name)
{
struct kobject *k = kset_find_obj(bus_kset, name);
return k ? to_bus(k) : NULL;
}
#endif /* 0 */
/**
* bus_add_attrs - Add default attributes for this bus.
* @bus: Bus that has just been registered.
*/
static int bus_add_attrs(struct bus_type *bus)
{
int error = 0;
int i;
if (bus->bus_attrs) {
for (i = 0; attr_name(bus->bus_attrs[i]); i++) {
error = bus_create_file(bus, &bus->bus_attrs[i]);
if (error)
goto err;
}
}
done:
return error;
err:
while (--i >= 0)
bus_remove_file(bus, &bus->bus_attrs[i]);
goto done;
}
static void bus_remove_attrs(struct bus_type *bus)
{
int i;
if (bus->bus_attrs) {
for (i = 0; attr_name(bus->bus_attrs[i]); i++)
bus_remove_file(bus, &bus->bus_attrs[i]);
}
}
static void klist_devices_get(struct klist_node *n)
{
struct device_private *dev_prv = to_device_private_bus(n);
struct device *dev = dev_prv->device;
get_device(dev);
}
static void klist_devices_put(struct klist_node *n)
{
struct device_private *dev_prv = to_device_private_bus(n);
struct device *dev = dev_prv->device;
put_device(dev);
}
static ssize_t bus_uevent_store(struct bus_type *bus,
const char *buf, size_t count)
{
enum kobject_action action;
if (kobject_action_type(buf, count, &action) == 0)
kobject_uevent(&bus->p->subsys.kobj, action);
return count;
}
static BUS_ATTR(uevent, S_IWUSR, NULL, bus_uevent_store);
/**
* bus_register - register a bus with the system.
* @bus: bus.
*
* Once we have that, we registered the bus with the kobject
* infrastructure, then register the children subsystems it has:
* the devices and drivers that belong to the bus.
*/
int bus_register(struct bus_type *bus)
{
int retval;
struct bus_type_private *priv;
priv = kzalloc(sizeof(struct bus_type_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->bus = bus;
bus->p = priv;
BLOCKING_INIT_NOTIFIER_HEAD(&priv->bus_notifier);
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-25 11:44:59 +08:00
retval = kobject_set_name(&priv->subsys.kobj, "%s", bus->name);
if (retval)
goto out;
priv->subsys.kobj.kset = bus_kset;
priv->subsys.kobj.ktype = &bus_ktype;
priv->drivers_autoprobe = 1;
retval = kset_register(&priv->subsys);
if (retval)
goto out;
retval = bus_create_file(bus, &bus_attr_uevent);
if (retval)
goto bus_uevent_fail;
priv->devices_kset = kset_create_and_add("devices", NULL,
&priv->subsys.kobj);
if (!priv->devices_kset) {
retval = -ENOMEM;
goto bus_devices_fail;
}
priv->drivers_kset = kset_create_and_add("drivers", NULL,
&priv->subsys.kobj);
if (!priv->drivers_kset) {
retval = -ENOMEM;
goto bus_drivers_fail;
}
klist_init(&priv->klist_devices, klist_devices_get, klist_devices_put);
klist_init(&priv->klist_drivers, NULL, NULL);
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
retval = add_probe_files(bus);
if (retval)
goto bus_probe_files_fail;
retval = bus_add_attrs(bus);
if (retval)
goto bus_attrs_fail;
pr_debug("bus: '%s': registered\n", bus->name);
return 0;
bus_attrs_fail:
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
remove_probe_files(bus);
bus_probe_files_fail:
kset_unregister(bus->p->drivers_kset);
bus_drivers_fail:
kset_unregister(bus->p->devices_kset);
bus_devices_fail:
bus_remove_file(bus, &bus_attr_uevent);
bus_uevent_fail:
kset_unregister(&bus->p->subsys);
kfree(bus->p);
out:
bus->p = NULL;
return retval;
}
EXPORT_SYMBOL_GPL(bus_register);
/**
* bus_unregister - remove a bus from the system
* @bus: bus.
*
* Unregister the child subsystems and the bus itself.
* Finally, we call bus_put() to release the refcount
*/
void bus_unregister(struct bus_type *bus)
{
pr_debug("bus: '%s': unregistering\n", bus->name);
bus_remove_attrs(bus);
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:33:36 +08:00
remove_probe_files(bus);
kset_unregister(bus->p->drivers_kset);
kset_unregister(bus->p->devices_kset);
bus_remove_file(bus, &bus_attr_uevent);
kset_unregister(&bus->p->subsys);
kfree(bus->p);
bus->p = NULL;
}
EXPORT_SYMBOL_GPL(bus_unregister);
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-25 11:44:59 +08:00
int bus_register_notifier(struct bus_type *bus, struct notifier_block *nb)
{
return blocking_notifier_chain_register(&bus->p->bus_notifier, nb);
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-25 11:44:59 +08:00
}
EXPORT_SYMBOL_GPL(bus_register_notifier);
int bus_unregister_notifier(struct bus_type *bus, struct notifier_block *nb)
{
return blocking_notifier_chain_unregister(&bus->p->bus_notifier, nb);
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-25 11:44:59 +08:00
}
EXPORT_SYMBOL_GPL(bus_unregister_notifier);
struct kset *bus_get_kset(struct bus_type *bus)
{
return &bus->p->subsys;
}
EXPORT_SYMBOL_GPL(bus_get_kset);
struct klist *bus_get_device_klist(struct bus_type *bus)
{
return &bus->p->klist_devices;
}
EXPORT_SYMBOL_GPL(bus_get_device_klist);
/*
* Yes, this forcably breaks the klist abstraction temporarily. It
* just wants to sort the klist, not change reference counts and
* take/drop locks rapidly in the process. It does all this while
* holding the lock for the list, so objects can't otherwise be
* added/removed while we're swizzling.
*/
static void device_insertion_sort_klist(struct device *a, struct list_head *list,
int (*compare)(const struct device *a,
const struct device *b))
{
struct list_head *pos;
struct klist_node *n;
struct device_private *dev_prv;
struct device *b;
list_for_each(pos, list) {
n = container_of(pos, struct klist_node, n_node);
dev_prv = to_device_private_bus(n);
b = dev_prv->device;
if (compare(a, b) <= 0) {
list_move_tail(&a->p->knode_bus.n_node,
&b->p->knode_bus.n_node);
return;
}
}
list_move_tail(&a->p->knode_bus.n_node, list);
}
void bus_sort_breadthfirst(struct bus_type *bus,
int (*compare)(const struct device *a,
const struct device *b))
{
LIST_HEAD(sorted_devices);
struct list_head *pos, *tmp;
struct klist_node *n;
struct device_private *dev_prv;
struct device *dev;
struct klist *device_klist;
device_klist = bus_get_device_klist(bus);
spin_lock(&device_klist->k_lock);
list_for_each_safe(pos, tmp, &device_klist->k_list) {
n = container_of(pos, struct klist_node, n_node);
dev_prv = to_device_private_bus(n);
dev = dev_prv->device;
device_insertion_sort_klist(dev, &sorted_devices, compare);
}
list_splice(&sorted_devices, &device_klist->k_list);
spin_unlock(&device_klist->k_lock);
}
EXPORT_SYMBOL_GPL(bus_sort_breadthfirst);
int __init buses_init(void)
{
bus_kset = kset_create_and_add("bus", &bus_uevent_ops, NULL);
if (!bus_kset)
return -ENOMEM;
return 0;
}