2022-02-08 17:13:25 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Rockchip PIPE USB3.0 PCIE SATA Combo Phy driver
|
|
|
|
*
|
|
|
|
* Copyright (C) 2021 Rockchip Electronics Co., Ltd.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/mfd/syscon.h>
|
2023-07-15 01:48:35 +08:00
|
|
|
#include <linux/of.h>
|
2022-02-08 17:13:25 +08:00
|
|
|
#include <linux/phy/phy.h>
|
2023-07-15 01:48:35 +08:00
|
|
|
#include <linux/platform_device.h>
|
2022-02-08 17:13:25 +08:00
|
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/reset.h>
|
|
|
|
#include <linux/units.h>
|
|
|
|
|
|
|
|
#define BIT_WRITEABLE_SHIFT 16
|
|
|
|
#define REF_CLOCK_24MHz (24 * HZ_PER_MHZ)
|
|
|
|
#define REF_CLOCK_25MHz (25 * HZ_PER_MHZ)
|
|
|
|
#define REF_CLOCK_100MHz (100 * HZ_PER_MHZ)
|
|
|
|
|
|
|
|
/* COMBO PHY REG */
|
|
|
|
#define PHYREG6 0x14
|
|
|
|
#define PHYREG6_PLL_DIV_MASK GENMASK(7, 6)
|
|
|
|
#define PHYREG6_PLL_DIV_SHIFT 6
|
|
|
|
#define PHYREG6_PLL_DIV_2 1
|
|
|
|
|
|
|
|
#define PHYREG7 0x18
|
|
|
|
#define PHYREG7_TX_RTERM_MASK GENMASK(7, 4)
|
|
|
|
#define PHYREG7_TX_RTERM_SHIFT 4
|
|
|
|
#define PHYREG7_TX_RTERM_50OHM 8
|
|
|
|
#define PHYREG7_RX_RTERM_MASK GENMASK(3, 0)
|
|
|
|
#define PHYREG7_RX_RTERM_SHIFT 0
|
|
|
|
#define PHYREG7_RX_RTERM_44OHM 15
|
|
|
|
|
|
|
|
#define PHYREG8 0x1C
|
|
|
|
#define PHYREG8_SSC_EN BIT(4)
|
|
|
|
|
|
|
|
#define PHYREG11 0x28
|
|
|
|
#define PHYREG11_SU_TRIM_0_7 0xF0
|
|
|
|
|
|
|
|
#define PHYREG12 0x2C
|
|
|
|
#define PHYREG12_PLL_LPF_ADJ_VALUE 4
|
|
|
|
|
|
|
|
#define PHYREG13 0x30
|
|
|
|
#define PHYREG13_RESISTER_MASK GENMASK(5, 4)
|
|
|
|
#define PHYREG13_RESISTER_SHIFT 0x4
|
|
|
|
#define PHYREG13_RESISTER_HIGH_Z 3
|
|
|
|
#define PHYREG13_CKRCV_AMP0 BIT(7)
|
|
|
|
|
|
|
|
#define PHYREG14 0x34
|
|
|
|
#define PHYREG14_CKRCV_AMP1 BIT(0)
|
|
|
|
|
|
|
|
#define PHYREG15 0x38
|
|
|
|
#define PHYREG15_CTLE_EN BIT(0)
|
|
|
|
#define PHYREG15_SSC_CNT_MASK GENMASK(7, 6)
|
|
|
|
#define PHYREG15_SSC_CNT_SHIFT 6
|
|
|
|
#define PHYREG15_SSC_CNT_VALUE 1
|
|
|
|
|
|
|
|
#define PHYREG16 0x3C
|
|
|
|
#define PHYREG16_SSC_CNT_VALUE 0x5f
|
|
|
|
|
|
|
|
#define PHYREG18 0x44
|
|
|
|
#define PHYREG18_PLL_LOOP 0x32
|
|
|
|
|
2023-03-14 21:55:55 +08:00
|
|
|
#define PHYREG27 0x6C
|
|
|
|
#define PHYREG27_RX_TRIM_RK3588 0x4C
|
|
|
|
|
2022-02-08 17:13:25 +08:00
|
|
|
#define PHYREG32 0x7C
|
|
|
|
#define PHYREG32_SSC_MASK GENMASK(7, 4)
|
|
|
|
#define PHYREG32_SSC_DIR_SHIFT 4
|
|
|
|
#define PHYREG32_SSC_UPWARD 0
|
|
|
|
#define PHYREG32_SSC_DOWNWARD 1
|
|
|
|
#define PHYREG32_SSC_OFFSET_SHIFT 6
|
|
|
|
#define PHYREG32_SSC_OFFSET_500PPM 1
|
|
|
|
|
|
|
|
#define PHYREG33 0x80
|
|
|
|
#define PHYREG33_PLL_KVCO_MASK GENMASK(4, 2)
|
|
|
|
#define PHYREG33_PLL_KVCO_SHIFT 2
|
|
|
|
#define PHYREG33_PLL_KVCO_VALUE 2
|
|
|
|
|
|
|
|
struct rockchip_combphy_priv;
|
|
|
|
|
|
|
|
struct combphy_reg {
|
|
|
|
u16 offset;
|
|
|
|
u16 bitend;
|
|
|
|
u16 bitstart;
|
|
|
|
u16 disable;
|
|
|
|
u16 enable;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct rockchip_combphy_grfcfg {
|
|
|
|
struct combphy_reg pcie_mode_set;
|
|
|
|
struct combphy_reg usb_mode_set;
|
|
|
|
struct combphy_reg sgmii_mode_set;
|
|
|
|
struct combphy_reg qsgmii_mode_set;
|
|
|
|
struct combphy_reg pipe_rxterm_set;
|
|
|
|
struct combphy_reg pipe_txelec_set;
|
|
|
|
struct combphy_reg pipe_txcomp_set;
|
|
|
|
struct combphy_reg pipe_clk_25m;
|
|
|
|
struct combphy_reg pipe_clk_100m;
|
|
|
|
struct combphy_reg pipe_phymode_sel;
|
|
|
|
struct combphy_reg pipe_rate_sel;
|
|
|
|
struct combphy_reg pipe_rxterm_sel;
|
|
|
|
struct combphy_reg pipe_txelec_sel;
|
|
|
|
struct combphy_reg pipe_txcomp_sel;
|
|
|
|
struct combphy_reg pipe_clk_ext;
|
|
|
|
struct combphy_reg pipe_sel_usb;
|
|
|
|
struct combphy_reg pipe_sel_qsgmii;
|
|
|
|
struct combphy_reg pipe_phy_status;
|
|
|
|
struct combphy_reg con0_for_pcie;
|
|
|
|
struct combphy_reg con1_for_pcie;
|
|
|
|
struct combphy_reg con2_for_pcie;
|
|
|
|
struct combphy_reg con3_for_pcie;
|
|
|
|
struct combphy_reg con0_for_sata;
|
|
|
|
struct combphy_reg con1_for_sata;
|
|
|
|
struct combphy_reg con2_for_sata;
|
|
|
|
struct combphy_reg con3_for_sata;
|
|
|
|
struct combphy_reg pipe_con0_for_sata;
|
2023-03-14 21:55:55 +08:00
|
|
|
struct combphy_reg pipe_con1_for_sata;
|
2022-02-08 17:13:25 +08:00
|
|
|
struct combphy_reg pipe_xpcs_phy_ready;
|
2023-03-14 21:55:55 +08:00
|
|
|
struct combphy_reg pipe_pcie1l0_sel;
|
|
|
|
struct combphy_reg pipe_pcie1l1_sel;
|
2022-02-08 17:13:25 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct rockchip_combphy_cfg {
|
2024-04-05 01:11:28 +08:00
|
|
|
unsigned int num_phys;
|
|
|
|
unsigned int phy_ids[3];
|
2022-02-08 17:13:25 +08:00
|
|
|
const struct rockchip_combphy_grfcfg *grfcfg;
|
|
|
|
int (*combphy_cfg)(struct rockchip_combphy_priv *priv);
|
|
|
|
};
|
|
|
|
|
|
|
|
struct rockchip_combphy_priv {
|
|
|
|
u8 type;
|
2024-04-05 01:11:28 +08:00
|
|
|
int id;
|
2022-02-08 17:13:25 +08:00
|
|
|
void __iomem *mmio;
|
|
|
|
int num_clks;
|
|
|
|
struct clk_bulk_data *clks;
|
|
|
|
struct device *dev;
|
|
|
|
struct regmap *pipe_grf;
|
|
|
|
struct regmap *phy_grf;
|
|
|
|
struct phy *phy;
|
|
|
|
struct reset_control *phy_rst;
|
|
|
|
const struct rockchip_combphy_cfg *cfg;
|
|
|
|
bool enable_ssc;
|
|
|
|
bool ext_refclk;
|
|
|
|
struct clk *refclk;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void rockchip_combphy_updatel(struct rockchip_combphy_priv *priv,
|
|
|
|
int mask, int val, int reg)
|
|
|
|
{
|
|
|
|
unsigned int temp;
|
|
|
|
|
|
|
|
temp = readl(priv->mmio + reg);
|
|
|
|
temp = (temp & ~(mask)) | val;
|
|
|
|
writel(temp, priv->mmio + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_combphy_param_write(struct regmap *base,
|
|
|
|
const struct combphy_reg *reg, bool en)
|
|
|
|
{
|
|
|
|
u32 val, mask, tmp;
|
|
|
|
|
|
|
|
tmp = en ? reg->enable : reg->disable;
|
|
|
|
mask = GENMASK(reg->bitend, reg->bitstart);
|
|
|
|
val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
|
|
|
|
|
|
|
|
return regmap_write(base, reg->offset, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv)
|
|
|
|
{
|
|
|
|
const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
|
|
|
|
u32 mask, val;
|
|
|
|
|
|
|
|
mask = GENMASK(cfg->pipe_phy_status.bitend,
|
|
|
|
cfg->pipe_phy_status.bitstart);
|
|
|
|
|
|
|
|
regmap_read(priv->phy_grf, cfg->pipe_phy_status.offset, &val);
|
|
|
|
val = (val & mask) >> cfg->pipe_phy_status.bitstart;
|
|
|
|
|
|
|
|
return val;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_combphy_init(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct rockchip_combphy_priv *priv = phy_get_drvdata(phy);
|
|
|
|
const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
|
|
|
|
u32 val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(priv->dev, "failed to enable clks\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (priv->type) {
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
case PHY_TYPE_SATA:
|
|
|
|
case PHY_TYPE_SGMII:
|
|
|
|
case PHY_TYPE_QSGMII:
|
|
|
|
if (priv->cfg->combphy_cfg)
|
|
|
|
ret = priv->cfg->combphy_cfg(priv);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(priv->dev, "incompatible PHY type\n");
|
|
|
|
ret = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ret) {
|
|
|
|
dev_err(priv->dev, "failed to init phy for phy type %x\n", priv->type);
|
|
|
|
goto err_clk;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = reset_control_deassert(priv->phy_rst);
|
|
|
|
if (ret)
|
|
|
|
goto err_clk;
|
|
|
|
|
|
|
|
if (priv->type == PHY_TYPE_USB3) {
|
|
|
|
ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready,
|
|
|
|
priv, val,
|
|
|
|
val == cfg->pipe_phy_status.enable,
|
|
|
|
10, 1000);
|
|
|
|
if (ret)
|
|
|
|
dev_warn(priv->dev, "wait phy status ready timeout\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_clk:
|
|
|
|
clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_combphy_exit(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct rockchip_combphy_priv *priv = phy_get_drvdata(phy);
|
|
|
|
|
|
|
|
clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
|
|
|
|
reset_control_assert(priv->phy_rst);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct phy_ops rochchip_combphy_ops = {
|
|
|
|
.init = rockchip_combphy_init,
|
|
|
|
.exit = rockchip_combphy_exit,
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct phy *rockchip_combphy_xlate(struct device *dev, struct of_phandle_args *args)
|
|
|
|
{
|
|
|
|
struct rockchip_combphy_priv *priv = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
if (args->args_count != 1) {
|
|
|
|
dev_err(dev, "invalid number of arguments\n");
|
|
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (priv->type != PHY_NONE && priv->type != args->args[0])
|
|
|
|
dev_warn(dev, "phy type select %d overwriting type %d\n",
|
|
|
|
args->args[0], priv->type);
|
|
|
|
|
|
|
|
priv->type = args->args[0];
|
|
|
|
|
|
|
|
return priv->phy;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy_priv *priv)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
|
|
|
|
if (priv->num_clks < 1)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
priv->refclk = NULL;
|
|
|
|
for (i = 0; i < priv->num_clks; i++) {
|
|
|
|
if (!strncmp(priv->clks[i].id, "ref", 3)) {
|
|
|
|
priv->refclk = priv->clks[i].clk;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!priv->refclk) {
|
|
|
|
dev_err(dev, "no refclk found\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-grf");
|
|
|
|
if (IS_ERR(priv->pipe_grf)) {
|
|
|
|
dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n");
|
|
|
|
return PTR_ERR(priv->pipe_grf);
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->phy_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-phy-grf");
|
|
|
|
if (IS_ERR(priv->phy_grf)) {
|
|
|
|
dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n");
|
|
|
|
return PTR_ERR(priv->phy_grf);
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->enable_ssc = device_property_present(dev, "rockchip,enable-ssc");
|
|
|
|
|
|
|
|
priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk");
|
|
|
|
|
|
|
|
priv->phy_rst = devm_reset_control_array_get_exclusive(dev);
|
|
|
|
if (IS_ERR(priv->phy_rst))
|
|
|
|
return dev_err_probe(dev, PTR_ERR(priv->phy_rst), "failed to get phy reset\n");
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_combphy_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct phy_provider *phy_provider;
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
struct rockchip_combphy_priv *priv;
|
|
|
|
const struct rockchip_combphy_cfg *phy_cfg;
|
|
|
|
struct resource *res;
|
2024-04-05 01:11:28 +08:00
|
|
|
int ret, id;
|
2022-02-08 17:13:25 +08:00
|
|
|
|
|
|
|
phy_cfg = of_device_get_match_data(dev);
|
|
|
|
if (!phy_cfg) {
|
|
|
|
dev_err(dev, "no OF match data provided\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
|
|
if (!priv)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
|
|
|
|
if (IS_ERR(priv->mmio)) {
|
|
|
|
ret = PTR_ERR(priv->mmio);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2024-04-05 01:11:28 +08:00
|
|
|
/* find the phy-id from the io address */
|
|
|
|
priv->id = -ENODEV;
|
|
|
|
for (id = 0; id < phy_cfg->num_phys; id++) {
|
|
|
|
if (res->start == phy_cfg->phy_ids[id]) {
|
|
|
|
priv->id = id;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2022-02-08 17:13:25 +08:00
|
|
|
priv->dev = dev;
|
|
|
|
priv->type = PHY_NONE;
|
|
|
|
priv->cfg = phy_cfg;
|
|
|
|
|
|
|
|
ret = rockchip_combphy_parse_dt(dev, priv);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = reset_control_assert(priv->phy_rst);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "failed to reset phy\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops);
|
|
|
|
if (IS_ERR(priv->phy)) {
|
|
|
|
dev_err(dev, "failed to create combphy\n");
|
|
|
|
return PTR_ERR(priv->phy);
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_set_drvdata(dev, priv);
|
|
|
|
phy_set_drvdata(priv->phy, priv);
|
|
|
|
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, rockchip_combphy_xlate);
|
|
|
|
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
|
|
|
|
{
|
|
|
|
const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
|
|
|
|
unsigned long rate;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
switch (priv->type) {
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
/* Set SSC downward spread spectrum. */
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
|
|
|
|
PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
|
|
|
|
PHYREG32);
|
|
|
|
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
/* Set SSC downward spread spectrum. */
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
|
|
|
|
PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
|
|
|
|
PHYREG32);
|
|
|
|
|
|
|
|
/* Enable adaptive CTLE for USB3.0 Rx. */
|
|
|
|
val = readl(priv->mmio + PHYREG15);
|
|
|
|
val |= PHYREG15_CTLE_EN;
|
|
|
|
writel(val, priv->mmio + PHYREG15);
|
|
|
|
|
|
|
|
/* Set PLL KVCO fine tuning signals. */
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
|
|
|
|
PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT,
|
|
|
|
PHYREG33);
|
|
|
|
|
|
|
|
/* Enable controlling random jitter. */
|
|
|
|
writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
|
|
|
|
|
|
|
|
/* Set PLL input clock divider 1/2. */
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
|
|
|
|
PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT,
|
|
|
|
PHYREG6);
|
|
|
|
|
|
|
|
writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
|
|
|
|
writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
|
|
|
|
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case PHY_TYPE_SATA:
|
|
|
|
/* Enable adaptive CTLE for SATA Rx. */
|
|
|
|
val = readl(priv->mmio + PHYREG15);
|
|
|
|
val |= PHYREG15_CTLE_EN;
|
|
|
|
writel(val, priv->mmio + PHYREG15);
|
|
|
|
/*
|
|
|
|
* Set tx_rterm=50ohm and rx_rterm=44ohm for SATA.
|
|
|
|
* 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm)
|
|
|
|
*/
|
|
|
|
val = PHYREG7_TX_RTERM_50OHM << PHYREG7_TX_RTERM_SHIFT;
|
|
|
|
val |= PHYREG7_RX_RTERM_44OHM << PHYREG7_RX_RTERM_SHIFT;
|
|
|
|
writel(val, priv->mmio + PHYREG7);
|
|
|
|
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true);
|
|
|
|
rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case PHY_TYPE_SGMII:
|
|
|
|
rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->sgmii_mode_set, true);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case PHY_TYPE_QSGMII:
|
|
|
|
rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_rate_sel, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
dev_err(priv->dev, "incompatible PHY type\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
rate = clk_get_rate(priv->refclk);
|
|
|
|
|
|
|
|
switch (rate) {
|
|
|
|
case REF_CLOCK_24MHz:
|
|
|
|
if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) {
|
|
|
|
/* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */
|
|
|
|
val = PHYREG15_SSC_CNT_VALUE << PHYREG15_SSC_CNT_SHIFT;
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG15_SSC_CNT_MASK,
|
|
|
|
val, PHYREG15);
|
|
|
|
|
|
|
|
writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case REF_CLOCK_25MHz:
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case REF_CLOCK_100MHz:
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
|
|
|
|
if (priv->type == PHY_TYPE_PCIE) {
|
|
|
|
/* PLL KVCO fine tuning. */
|
|
|
|
val = PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT;
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
|
|
|
|
val, PHYREG33);
|
|
|
|
|
|
|
|
/* Enable controlling random jitter. */
|
|
|
|
writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
|
|
|
|
|
|
|
|
val = PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT;
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
|
|
|
|
val, PHYREG6);
|
|
|
|
|
|
|
|
writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
|
|
|
|
writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
|
|
|
|
} else if (priv->type == PHY_TYPE_SATA) {
|
|
|
|
/* downward spread spectrum +500ppm */
|
|
|
|
val = PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT;
|
|
|
|
val |= PHYREG32_SSC_OFFSET_500PPM << PHYREG32_SSC_OFFSET_SHIFT;
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, val, PHYREG32);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
dev_err(priv->dev, "unsupported rate: %lu\n", rate);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (priv->ext_refclk) {
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true);
|
|
|
|
if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) {
|
|
|
|
val = PHYREG13_RESISTER_HIGH_Z << PHYREG13_RESISTER_SHIFT;
|
|
|
|
val |= PHYREG13_CKRCV_AMP0;
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG13_RESISTER_MASK, val, PHYREG13);
|
|
|
|
|
|
|
|
val = readl(priv->mmio + PHYREG14);
|
|
|
|
val |= PHYREG14_CKRCV_AMP1;
|
|
|
|
writel(val, priv->mmio + PHYREG14);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (priv->enable_ssc) {
|
|
|
|
val = readl(priv->mmio + PHYREG8);
|
|
|
|
val |= PHYREG8_SSC_EN;
|
|
|
|
writel(val, priv->mmio + PHYREG8);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
|
|
|
|
/* pipe-phy-grf */
|
|
|
|
.pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 },
|
|
|
|
.usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 },
|
|
|
|
.sgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x01 },
|
|
|
|
.qsgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x21 },
|
|
|
|
.pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 },
|
|
|
|
.pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 },
|
|
|
|
.pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 },
|
|
|
|
.pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 },
|
|
|
|
.pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 },
|
|
|
|
.pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 },
|
|
|
|
.pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 },
|
|
|
|
.pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 },
|
|
|
|
.pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 },
|
|
|
|
.pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 },
|
|
|
|
.pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 },
|
|
|
|
.pipe_sel_usb = { 0x000c, 14, 13, 0x00, 0x01 },
|
|
|
|
.pipe_sel_qsgmii = { 0x000c, 15, 13, 0x00, 0x07 },
|
|
|
|
.pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 },
|
|
|
|
.con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 },
|
|
|
|
.con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 },
|
|
|
|
.con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 },
|
|
|
|
.con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 },
|
|
|
|
.con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0119 },
|
|
|
|
.con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0040 },
|
|
|
|
.con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c3 },
|
|
|
|
.con3_for_sata = { 0x000c, 15, 0, 0x00, 0x4407 },
|
|
|
|
/* pipe-grf */
|
|
|
|
.pipe_con0_for_sata = { 0x0000, 15, 0, 0x00, 0x2220 },
|
|
|
|
.pipe_xpcs_phy_ready = { 0x0040, 2, 2, 0x00, 0x01 },
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = {
|
2024-04-05 01:11:28 +08:00
|
|
|
.num_phys = 3,
|
|
|
|
.phy_ids = {
|
|
|
|
0xfe820000,
|
|
|
|
0xfe830000,
|
|
|
|
0xfe840000,
|
|
|
|
},
|
2022-02-08 17:13:25 +08:00
|
|
|
.grfcfg = &rk3568_combphy_grfcfgs,
|
|
|
|
.combphy_cfg = rk3568_combphy_cfg,
|
|
|
|
};
|
|
|
|
|
2023-03-14 21:55:55 +08:00
|
|
|
static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv)
|
|
|
|
{
|
|
|
|
const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
|
|
|
|
unsigned long rate;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
switch (priv->type) {
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
|
2024-04-05 01:11:28 +08:00
|
|
|
switch (priv->id) {
|
|
|
|
case 1:
|
|
|
|
rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_pcie1l0_sel, true);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_pcie1l1_sel, true);
|
|
|
|
break;
|
|
|
|
}
|
2023-03-14 21:55:55 +08:00
|
|
|
break;
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
/* Set SSC downward spread spectrum */
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
|
|
|
|
PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
|
|
|
|
PHYREG32);
|
|
|
|
|
|
|
|
/* Enable adaptive CTLE for USB3.0 Rx. */
|
|
|
|
val = readl(priv->mmio + PHYREG15);
|
|
|
|
val |= PHYREG15_CTLE_EN;
|
|
|
|
writel(val, priv->mmio + PHYREG15);
|
|
|
|
|
|
|
|
/* Set PLL KVCO fine tuning signals. */
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
|
|
|
|
PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT,
|
|
|
|
PHYREG33);
|
|
|
|
|
|
|
|
/* Enable controlling random jitter. */
|
|
|
|
writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
|
|
|
|
|
|
|
|
/* Set PLL input clock divider 1/2. */
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
|
|
|
|
PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT,
|
|
|
|
PHYREG6);
|
|
|
|
|
|
|
|
writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
|
|
|
|
writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
|
|
|
|
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true);
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_SATA:
|
|
|
|
/* Enable adaptive CTLE for SATA Rx. */
|
|
|
|
val = readl(priv->mmio + PHYREG15);
|
|
|
|
val |= PHYREG15_CTLE_EN;
|
|
|
|
writel(val, priv->mmio + PHYREG15);
|
|
|
|
/*
|
|
|
|
* Set tx_rterm=50ohm and rx_rterm=44ohm for SATA.
|
|
|
|
* 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm)
|
|
|
|
*/
|
|
|
|
val = PHYREG7_TX_RTERM_50OHM << PHYREG7_TX_RTERM_SHIFT;
|
|
|
|
val |= PHYREG7_RX_RTERM_44OHM << PHYREG7_RX_RTERM_SHIFT;
|
|
|
|
writel(val, priv->mmio + PHYREG7);
|
|
|
|
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true);
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true);
|
|
|
|
rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
|
|
|
|
rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true);
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_SGMII:
|
|
|
|
case PHY_TYPE_QSGMII:
|
|
|
|
default:
|
|
|
|
dev_err(priv->dev, "incompatible PHY type\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
rate = clk_get_rate(priv->refclk);
|
|
|
|
|
|
|
|
switch (rate) {
|
|
|
|
case REF_CLOCK_24MHz:
|
|
|
|
if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) {
|
|
|
|
/* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */
|
|
|
|
val = PHYREG15_SSC_CNT_VALUE << PHYREG15_SSC_CNT_SHIFT;
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG15_SSC_CNT_MASK,
|
|
|
|
val, PHYREG15);
|
|
|
|
|
|
|
|
writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case REF_CLOCK_25MHz:
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true);
|
|
|
|
break;
|
|
|
|
case REF_CLOCK_100MHz:
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
|
|
|
|
if (priv->type == PHY_TYPE_PCIE) {
|
|
|
|
/* PLL KVCO fine tuning. */
|
|
|
|
val = 4 << PHYREG33_PLL_KVCO_SHIFT;
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
|
|
|
|
val, PHYREG33);
|
|
|
|
|
|
|
|
/* Enable controlling random jitter. */
|
|
|
|
writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
|
|
|
|
|
|
|
|
/* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */
|
|
|
|
writel(PHYREG27_RX_TRIM_RK3588, priv->mmio + PHYREG27);
|
|
|
|
|
|
|
|
/* Set up su_trim: */
|
|
|
|
writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
|
|
|
|
} else if (priv->type == PHY_TYPE_SATA) {
|
|
|
|
/* downward spread spectrum +500ppm */
|
|
|
|
val = PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT;
|
|
|
|
val |= PHYREG32_SSC_OFFSET_500PPM << PHYREG32_SSC_OFFSET_SHIFT;
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, val, PHYREG32);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(priv->dev, "Unsupported rate: %lu\n", rate);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (priv->ext_refclk) {
|
|
|
|
rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true);
|
|
|
|
if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) {
|
|
|
|
val = PHYREG13_RESISTER_HIGH_Z << PHYREG13_RESISTER_SHIFT;
|
|
|
|
val |= PHYREG13_CKRCV_AMP0;
|
|
|
|
rockchip_combphy_updatel(priv, PHYREG13_RESISTER_MASK, val, PHYREG13);
|
|
|
|
|
|
|
|
val = readl(priv->mmio + PHYREG14);
|
|
|
|
val |= PHYREG14_CKRCV_AMP1;
|
|
|
|
writel(val, priv->mmio + PHYREG14);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (priv->enable_ssc) {
|
|
|
|
val = readl(priv->mmio + PHYREG8);
|
|
|
|
val |= PHYREG8_SSC_EN;
|
|
|
|
writel(val, priv->mmio + PHYREG8);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct rockchip_combphy_grfcfg rk3588_combphy_grfcfgs = {
|
|
|
|
/* pipe-phy-grf */
|
|
|
|
.pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 },
|
|
|
|
.usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 },
|
|
|
|
.pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 },
|
|
|
|
.pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 },
|
|
|
|
.pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 },
|
|
|
|
.pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 },
|
|
|
|
.pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 },
|
|
|
|
.pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 },
|
|
|
|
.pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 },
|
|
|
|
.pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 },
|
|
|
|
.pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 },
|
|
|
|
.pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 },
|
|
|
|
.con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 },
|
|
|
|
.con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 },
|
|
|
|
.con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 },
|
|
|
|
.con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 },
|
|
|
|
.con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0129 },
|
|
|
|
.con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0000 },
|
|
|
|
.con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c1 },
|
|
|
|
.con3_for_sata = { 0x000c, 15, 0, 0x00, 0x0407 },
|
|
|
|
/* pipe-grf */
|
|
|
|
.pipe_con0_for_sata = { 0x0000, 11, 5, 0x00, 0x22 },
|
|
|
|
.pipe_con1_for_sata = { 0x0000, 2, 0, 0x00, 0x2 },
|
|
|
|
.pipe_pcie1l0_sel = { 0x0100, 0, 0, 0x01, 0x0 },
|
|
|
|
.pipe_pcie1l1_sel = { 0x0100, 1, 1, 0x01, 0x0 },
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct rockchip_combphy_cfg rk3588_combphy_cfgs = {
|
2024-04-05 01:11:28 +08:00
|
|
|
.num_phys = 3,
|
|
|
|
.phy_ids = {
|
|
|
|
0xfee00000,
|
|
|
|
0xfee10000,
|
|
|
|
0xfee20000,
|
|
|
|
},
|
2023-03-14 21:55:55 +08:00
|
|
|
.grfcfg = &rk3588_combphy_grfcfgs,
|
|
|
|
.combphy_cfg = rk3588_combphy_cfg,
|
|
|
|
};
|
|
|
|
|
2022-02-08 17:13:25 +08:00
|
|
|
static const struct of_device_id rockchip_combphy_of_match[] = {
|
|
|
|
{
|
|
|
|
.compatible = "rockchip,rk3568-naneng-combphy",
|
|
|
|
.data = &rk3568_combphy_cfgs,
|
|
|
|
},
|
2023-03-14 21:55:55 +08:00
|
|
|
{
|
|
|
|
.compatible = "rockchip,rk3588-naneng-combphy",
|
|
|
|
.data = &rk3588_combphy_cfgs,
|
|
|
|
},
|
2022-02-08 17:13:25 +08:00
|
|
|
{ },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match);
|
|
|
|
|
|
|
|
static struct platform_driver rockchip_combphy_driver = {
|
|
|
|
.probe = rockchip_combphy_probe,
|
|
|
|
.driver = {
|
|
|
|
.name = "rockchip-naneng-combphy",
|
|
|
|
.of_match_table = rockchip_combphy_of_match,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
module_platform_driver(rockchip_combphy_driver);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Rockchip NANENG COMBPHY driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|