License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2008-01-29 21:53:40 +08:00
|
|
|
/*
|
|
|
|
* Functions related to io context handling
|
|
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/bio.h>
|
|
|
|
#include <linux/blkdev.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
|
|
|
#include <linux/slab.h>
|
2017-02-06 17:57:33 +08:00
|
|
|
#include <linux/sched/task.h>
|
2008-01-29 21:53:40 +08:00
|
|
|
|
|
|
|
#include "blk.h"
|
2021-11-24 02:53:08 +08:00
|
|
|
#include "blk-mq-sched.h"
|
2008-01-29 21:53:40 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* For io context allocations
|
|
|
|
*/
|
|
|
|
static struct kmem_cache *iocontext_cachep;
|
|
|
|
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
/**
|
|
|
|
* get_io_context - increment reference count to io_context
|
|
|
|
* @ioc: io_context to get
|
|
|
|
*
|
|
|
|
* Increment reference count to @ioc.
|
|
|
|
*/
|
2021-11-26 19:58:10 +08:00
|
|
|
static void get_io_context(struct io_context *ioc)
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
{
|
|
|
|
BUG_ON(atomic_long_read(&ioc->refcount) <= 0);
|
|
|
|
atomic_long_inc(&ioc->refcount);
|
|
|
|
}
|
|
|
|
|
2011-12-14 07:33:42 +08:00
|
|
|
static void icq_free_icq_rcu(struct rcu_head *head)
|
|
|
|
{
|
|
|
|
struct io_cq *icq = container_of(head, struct io_cq, __rcu_head);
|
|
|
|
|
|
|
|
kmem_cache_free(icq->__rcu_icq_cache, icq);
|
|
|
|
}
|
|
|
|
|
2017-02-11 02:32:34 +08:00
|
|
|
/*
|
2017-03-03 04:59:08 +08:00
|
|
|
* Exit an icq. Called with ioc locked for blk-mq, and with both ioc
|
|
|
|
* and queue locked for legacy.
|
2017-02-11 02:32:34 +08:00
|
|
|
*/
|
2011-12-14 07:33:42 +08:00
|
|
|
static void ioc_exit_icq(struct io_cq *icq)
|
block: exit_io_context() should call elevator_exit_icq_fn()
While updating locking, b2efa05265 "block, cfq: unlink
cfq_io_context's immediately" moved elevator_exit_icq_fn() invocation
from exit_io_context() to the final ioc put. While this doesn't cause
catastrophic failure, it effectively removes task exit notification to
elevator and cause noticeable IO performance degradation with CFQ.
On task exit, CFQ used to immediately expire the slice if it was being
used by the exiting task as no more IO would be issued by the task;
however, after b2efa05265, the notification is lost and disk could sit
idle needlessly, leading to noticeable IO performance degradation for
certain workloads.
This patch renames ioc_exit_icq() to ioc_destroy_icq(), separates
elevator_exit_icq_fn() invocation into ioc_exit_icq() and invokes it
from exit_io_context(). ICQ_EXITED flag is added to avoid invoking
the callback more than once for the same icq.
Walking icq_list from ioc side and invoking elevator callback requires
reverse double locking. This may be better implemented using RCU;
unfortunately, using RCU isn't trivial. e.g. RCU protection would
need to cover request_queue and queue_lock switch on cleanup makes
grabbing queue_lock from RCU unsafe. Reverse double locking should
do, at least for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: Shaohua Li <shli@kernel.org>
LKML-Reference: <CANejiEVzs=pUhQSTvUppkDcc2TNZyfohBRLygW5zFmXyk5A-xQ@mail.gmail.com>
Tested-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-15 16:45:53 +08:00
|
|
|
{
|
|
|
|
struct elevator_type *et = icq->q->elevator->type;
|
|
|
|
|
|
|
|
if (icq->flags & ICQ_EXITED)
|
|
|
|
return;
|
|
|
|
|
2018-11-02 06:41:41 +08:00
|
|
|
if (et->ops.exit_icq)
|
|
|
|
et->ops.exit_icq(icq);
|
block: exit_io_context() should call elevator_exit_icq_fn()
While updating locking, b2efa05265 "block, cfq: unlink
cfq_io_context's immediately" moved elevator_exit_icq_fn() invocation
from exit_io_context() to the final ioc put. While this doesn't cause
catastrophic failure, it effectively removes task exit notification to
elevator and cause noticeable IO performance degradation with CFQ.
On task exit, CFQ used to immediately expire the slice if it was being
used by the exiting task as no more IO would be issued by the task;
however, after b2efa05265, the notification is lost and disk could sit
idle needlessly, leading to noticeable IO performance degradation for
certain workloads.
This patch renames ioc_exit_icq() to ioc_destroy_icq(), separates
elevator_exit_icq_fn() invocation into ioc_exit_icq() and invokes it
from exit_io_context(). ICQ_EXITED flag is added to avoid invoking
the callback more than once for the same icq.
Walking icq_list from ioc side and invoking elevator callback requires
reverse double locking. This may be better implemented using RCU;
unfortunately, using RCU isn't trivial. e.g. RCU protection would
need to cover request_queue and queue_lock switch on cleanup makes
grabbing queue_lock from RCU unsafe. Reverse double locking should
do, at least for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: Shaohua Li <shli@kernel.org>
LKML-Reference: <CANejiEVzs=pUhQSTvUppkDcc2TNZyfohBRLygW5zFmXyk5A-xQ@mail.gmail.com>
Tested-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-15 16:45:53 +08:00
|
|
|
|
|
|
|
icq->flags |= ICQ_EXITED;
|
|
|
|
}
|
|
|
|
|
2021-12-09 14:31:23 +08:00
|
|
|
static void ioc_exit_icqs(struct io_context *ioc)
|
|
|
|
{
|
|
|
|
struct io_cq *icq;
|
|
|
|
|
|
|
|
spin_lock_irq(&ioc->lock);
|
|
|
|
hlist_for_each_entry(icq, &ioc->icq_list, ioc_node)
|
|
|
|
ioc_exit_icq(icq);
|
|
|
|
spin_unlock_irq(&ioc->lock);
|
|
|
|
}
|
|
|
|
|
2017-03-03 04:59:08 +08:00
|
|
|
/*
|
|
|
|
* Release an icq. Called with ioc locked for blk-mq, and with both ioc
|
|
|
|
* and queue locked for legacy.
|
|
|
|
*/
|
block: exit_io_context() should call elevator_exit_icq_fn()
While updating locking, b2efa05265 "block, cfq: unlink
cfq_io_context's immediately" moved elevator_exit_icq_fn() invocation
from exit_io_context() to the final ioc put. While this doesn't cause
catastrophic failure, it effectively removes task exit notification to
elevator and cause noticeable IO performance degradation with CFQ.
On task exit, CFQ used to immediately expire the slice if it was being
used by the exiting task as no more IO would be issued by the task;
however, after b2efa05265, the notification is lost and disk could sit
idle needlessly, leading to noticeable IO performance degradation for
certain workloads.
This patch renames ioc_exit_icq() to ioc_destroy_icq(), separates
elevator_exit_icq_fn() invocation into ioc_exit_icq() and invokes it
from exit_io_context(). ICQ_EXITED flag is added to avoid invoking
the callback more than once for the same icq.
Walking icq_list from ioc side and invoking elevator callback requires
reverse double locking. This may be better implemented using RCU;
unfortunately, using RCU isn't trivial. e.g. RCU protection would
need to cover request_queue and queue_lock switch on cleanup makes
grabbing queue_lock from RCU unsafe. Reverse double locking should
do, at least for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: Shaohua Li <shli@kernel.org>
LKML-Reference: <CANejiEVzs=pUhQSTvUppkDcc2TNZyfohBRLygW5zFmXyk5A-xQ@mail.gmail.com>
Tested-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-15 16:45:53 +08:00
|
|
|
static void ioc_destroy_icq(struct io_cq *icq)
|
2011-12-14 07:33:42 +08:00
|
|
|
{
|
|
|
|
struct io_context *ioc = icq->ioc;
|
|
|
|
struct request_queue *q = icq->q;
|
|
|
|
struct elevator_type *et = q->elevator->type;
|
|
|
|
|
|
|
|
lockdep_assert_held(&ioc->lock);
|
|
|
|
|
|
|
|
radix_tree_delete(&ioc->icq_tree, icq->q->id);
|
|
|
|
hlist_del_init(&icq->ioc_node);
|
|
|
|
list_del_init(&icq->q_node);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Both setting lookup hint to and clearing it from @icq are done
|
|
|
|
* under queue_lock. If it's not pointing to @icq now, it never
|
|
|
|
* will. Hint assignment itself can race safely.
|
|
|
|
*/
|
2014-02-18 05:35:57 +08:00
|
|
|
if (rcu_access_pointer(ioc->icq_hint) == icq)
|
2011-12-14 07:33:42 +08:00
|
|
|
rcu_assign_pointer(ioc->icq_hint, NULL);
|
|
|
|
|
block: exit_io_context() should call elevator_exit_icq_fn()
While updating locking, b2efa05265 "block, cfq: unlink
cfq_io_context's immediately" moved elevator_exit_icq_fn() invocation
from exit_io_context() to the final ioc put. While this doesn't cause
catastrophic failure, it effectively removes task exit notification to
elevator and cause noticeable IO performance degradation with CFQ.
On task exit, CFQ used to immediately expire the slice if it was being
used by the exiting task as no more IO would be issued by the task;
however, after b2efa05265, the notification is lost and disk could sit
idle needlessly, leading to noticeable IO performance degradation for
certain workloads.
This patch renames ioc_exit_icq() to ioc_destroy_icq(), separates
elevator_exit_icq_fn() invocation into ioc_exit_icq() and invokes it
from exit_io_context(). ICQ_EXITED flag is added to avoid invoking
the callback more than once for the same icq.
Walking icq_list from ioc side and invoking elevator callback requires
reverse double locking. This may be better implemented using RCU;
unfortunately, using RCU isn't trivial. e.g. RCU protection would
need to cover request_queue and queue_lock switch on cleanup makes
grabbing queue_lock from RCU unsafe. Reverse double locking should
do, at least for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: Shaohua Li <shli@kernel.org>
LKML-Reference: <CANejiEVzs=pUhQSTvUppkDcc2TNZyfohBRLygW5zFmXyk5A-xQ@mail.gmail.com>
Tested-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-15 16:45:53 +08:00
|
|
|
ioc_exit_icq(icq);
|
2011-12-14 07:33:42 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* @icq->q might have gone away by the time RCU callback runs
|
|
|
|
* making it impossible to determine icq_cache. Record it in @icq.
|
|
|
|
*/
|
|
|
|
icq->__rcu_icq_cache = et->icq_cache;
|
2020-03-11 18:37:50 +08:00
|
|
|
icq->flags |= ICQ_DESTROYED;
|
2011-12-14 07:33:42 +08:00
|
|
|
call_rcu(&icq->__rcu_head, icq_free_icq_rcu);
|
|
|
|
}
|
|
|
|
|
2011-12-14 07:33:39 +08:00
|
|
|
/*
|
|
|
|
* Slow path for ioc release in put_io_context(). Performs double-lock
|
2011-12-14 07:33:41 +08:00
|
|
|
* dancing to unlink all icq's and then frees ioc.
|
2011-12-14 07:33:39 +08:00
|
|
|
*/
|
|
|
|
static void ioc_release_fn(struct work_struct *work)
|
2008-01-29 21:53:40 +08:00
|
|
|
{
|
2011-12-14 07:33:39 +08:00
|
|
|
struct io_context *ioc = container_of(work, struct io_context,
|
|
|
|
release_work);
|
2020-06-19 23:17:17 +08:00
|
|
|
spin_lock_irq(&ioc->lock);
|
2011-12-14 07:33:39 +08:00
|
|
|
|
2011-12-14 07:33:41 +08:00
|
|
|
while (!hlist_empty(&ioc->icq_list)) {
|
|
|
|
struct io_cq *icq = hlist_entry(ioc->icq_list.first,
|
|
|
|
struct io_cq, ioc_node);
|
2012-02-15 16:45:52 +08:00
|
|
|
struct request_queue *q = icq->q;
|
|
|
|
|
2018-11-16 03:17:28 +08:00
|
|
|
if (spin_trylock(&q->queue_lock)) {
|
block: exit_io_context() should call elevator_exit_icq_fn()
While updating locking, b2efa05265 "block, cfq: unlink
cfq_io_context's immediately" moved elevator_exit_icq_fn() invocation
from exit_io_context() to the final ioc put. While this doesn't cause
catastrophic failure, it effectively removes task exit notification to
elevator and cause noticeable IO performance degradation with CFQ.
On task exit, CFQ used to immediately expire the slice if it was being
used by the exiting task as no more IO would be issued by the task;
however, after b2efa05265, the notification is lost and disk could sit
idle needlessly, leading to noticeable IO performance degradation for
certain workloads.
This patch renames ioc_exit_icq() to ioc_destroy_icq(), separates
elevator_exit_icq_fn() invocation into ioc_exit_icq() and invokes it
from exit_io_context(). ICQ_EXITED flag is added to avoid invoking
the callback more than once for the same icq.
Walking icq_list from ioc side and invoking elevator callback requires
reverse double locking. This may be better implemented using RCU;
unfortunately, using RCU isn't trivial. e.g. RCU protection would
need to cover request_queue and queue_lock switch on cleanup makes
grabbing queue_lock from RCU unsafe. Reverse double locking should
do, at least for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: Shaohua Li <shli@kernel.org>
LKML-Reference: <CANejiEVzs=pUhQSTvUppkDcc2TNZyfohBRLygW5zFmXyk5A-xQ@mail.gmail.com>
Tested-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-15 16:45:53 +08:00
|
|
|
ioc_destroy_icq(icq);
|
2018-11-16 03:17:28 +08:00
|
|
|
spin_unlock(&q->queue_lock);
|
2012-02-15 16:45:52 +08:00
|
|
|
} else {
|
2020-06-19 23:17:18 +08:00
|
|
|
/* Make sure q and icq cannot be freed. */
|
|
|
|
rcu_read_lock();
|
|
|
|
|
|
|
|
/* Re-acquire the locks in the correct order. */
|
|
|
|
spin_unlock(&ioc->lock);
|
|
|
|
spin_lock(&q->queue_lock);
|
|
|
|
spin_lock(&ioc->lock);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The icq may have been destroyed when the ioc lock
|
|
|
|
* was released.
|
|
|
|
*/
|
|
|
|
if (!(icq->flags & ICQ_DESTROYED))
|
|
|
|
ioc_destroy_icq(icq);
|
|
|
|
|
|
|
|
spin_unlock(&q->queue_lock);
|
|
|
|
rcu_read_unlock();
|
2011-12-14 07:33:39 +08:00
|
|
|
}
|
|
|
|
}
|
2008-02-19 17:02:29 +08:00
|
|
|
|
2020-06-19 23:17:17 +08:00
|
|
|
spin_unlock_irq(&ioc->lock);
|
2011-12-14 07:33:39 +08:00
|
|
|
|
|
|
|
kmem_cache_free(iocontext_cachep, ioc);
|
2008-01-29 21:53:40 +08:00
|
|
|
}
|
|
|
|
|
2011-12-14 07:33:37 +08:00
|
|
|
/**
|
|
|
|
* put_io_context - put a reference of io_context
|
|
|
|
* @ioc: io_context to put
|
|
|
|
*
|
|
|
|
* Decrement reference count of @ioc and release it if the count reaches
|
2012-02-07 14:51:30 +08:00
|
|
|
* zero.
|
2008-01-29 21:53:40 +08:00
|
|
|
*/
|
2012-02-07 14:51:30 +08:00
|
|
|
void put_io_context(struct io_context *ioc)
|
2008-01-29 21:53:40 +08:00
|
|
|
{
|
2011-12-14 07:33:39 +08:00
|
|
|
unsigned long flags;
|
2012-03-14 22:34:48 +08:00
|
|
|
bool free_ioc = false;
|
2011-12-14 07:33:39 +08:00
|
|
|
|
2011-12-14 07:33:37 +08:00
|
|
|
BUG_ON(atomic_long_read(&ioc->refcount) <= 0);
|
2008-01-29 21:53:40 +08:00
|
|
|
|
2011-12-14 07:33:39 +08:00
|
|
|
/*
|
2012-02-07 14:51:30 +08:00
|
|
|
* Releasing ioc requires reverse order double locking and we may
|
|
|
|
* already be holding a queue_lock. Do it asynchronously from wq.
|
2011-12-14 07:33:39 +08:00
|
|
|
*/
|
2012-02-07 14:51:30 +08:00
|
|
|
if (atomic_long_dec_and_test(&ioc->refcount)) {
|
|
|
|
spin_lock_irqsave(&ioc->lock, flags);
|
|
|
|
if (!hlist_empty(&ioc->icq_list))
|
2013-04-24 19:42:56 +08:00
|
|
|
queue_work(system_power_efficient_wq,
|
|
|
|
&ioc->release_work);
|
2012-03-14 22:34:48 +08:00
|
|
|
else
|
|
|
|
free_ioc = true;
|
2012-02-07 14:51:30 +08:00
|
|
|
spin_unlock_irqrestore(&ioc->lock, flags);
|
2011-12-14 07:33:39 +08:00
|
|
|
}
|
2012-03-14 22:34:48 +08:00
|
|
|
|
|
|
|
if (free_ioc)
|
|
|
|
kmem_cache_free(iocontext_cachep, ioc);
|
2008-01-29 21:53:40 +08:00
|
|
|
}
|
2021-11-26 19:58:11 +08:00
|
|
|
EXPORT_SYMBOL_GPL(put_io_context);
|
2008-01-29 21:53:40 +08:00
|
|
|
|
2012-03-06 05:15:26 +08:00
|
|
|
/* Called by the exiting task */
|
|
|
|
void exit_io_context(struct task_struct *task)
|
|
|
|
{
|
|
|
|
struct io_context *ioc;
|
|
|
|
|
|
|
|
task_lock(task);
|
|
|
|
ioc = task->io_context;
|
|
|
|
task->io_context = NULL;
|
|
|
|
task_unlock(task);
|
|
|
|
|
2021-12-09 14:31:23 +08:00
|
|
|
if (atomic_dec_and_test(&ioc->active_ref)) {
|
|
|
|
ioc_exit_icqs(ioc);
|
|
|
|
put_io_context(ioc);
|
|
|
|
}
|
2012-03-06 05:15:26 +08:00
|
|
|
}
|
|
|
|
|
2017-03-03 04:59:08 +08:00
|
|
|
static void __ioc_clear_queue(struct list_head *icq_list)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
2020-03-11 18:37:50 +08:00
|
|
|
rcu_read_lock();
|
2017-03-03 04:59:08 +08:00
|
|
|
while (!list_empty(icq_list)) {
|
|
|
|
struct io_cq *icq = list_entry(icq_list->next,
|
block: remove dead elevator code
This removes a bunch of core and elevator related code. On the core
front, we remove anything related to queue running, draining,
initialization, plugging, and congestions. We also kill anything
related to request allocation, merging, retrieval, and completion.
Remove any checking for single queue IO schedulers, as they no
longer exist. This means we can also delete a bunch of code related
to request issue, adding, completion, etc - and all the SQ related
ops and helpers.
Also kill the load_default_modules(), as all that did was provide
for a way to load the default single queue elevator.
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-30 00:23:51 +08:00
|
|
|
struct io_cq, q_node);
|
2017-03-03 04:59:08 +08:00
|
|
|
struct io_context *ioc = icq->ioc;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ioc->lock, flags);
|
2020-03-11 18:37:50 +08:00
|
|
|
if (icq->flags & ICQ_DESTROYED) {
|
|
|
|
spin_unlock_irqrestore(&ioc->lock, flags);
|
|
|
|
continue;
|
|
|
|
}
|
2017-03-03 04:59:08 +08:00
|
|
|
ioc_destroy_icq(icq);
|
|
|
|
spin_unlock_irqrestore(&ioc->lock, flags);
|
|
|
|
}
|
2020-03-11 18:37:50 +08:00
|
|
|
rcu_read_unlock();
|
2017-03-03 04:59:08 +08:00
|
|
|
}
|
|
|
|
|
2011-12-14 07:33:42 +08:00
|
|
|
/**
|
|
|
|
* ioc_clear_queue - break any ioc association with the specified queue
|
|
|
|
* @q: request_queue being cleared
|
|
|
|
*
|
2017-03-03 04:59:08 +08:00
|
|
|
* Walk @q->icq_list and exit all io_cq's.
|
2011-12-14 07:33:42 +08:00
|
|
|
*/
|
|
|
|
void ioc_clear_queue(struct request_queue *q)
|
|
|
|
{
|
2017-03-03 04:59:08 +08:00
|
|
|
LIST_HEAD(icq_list);
|
2011-12-14 07:33:42 +08:00
|
|
|
|
2018-11-16 03:17:28 +08:00
|
|
|
spin_lock_irq(&q->queue_lock);
|
2017-03-03 04:59:08 +08:00
|
|
|
list_splice_init(&q->icq_list, &icq_list);
|
2018-11-16 03:17:28 +08:00
|
|
|
spin_unlock_irq(&q->queue_lock);
|
2011-12-14 07:33:42 +08:00
|
|
|
|
block: remove dead elevator code
This removes a bunch of core and elevator related code. On the core
front, we remove anything related to queue running, draining,
initialization, plugging, and congestions. We also kill anything
related to request allocation, merging, retrieval, and completion.
Remove any checking for single queue IO schedulers, as they no
longer exist. This means we can also delete a bunch of code related
to request issue, adding, completion, etc - and all the SQ related
ops and helpers.
Also kill the load_default_modules(), as all that did was provide
for a way to load the default single queue elevator.
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-30 00:23:51 +08:00
|
|
|
__ioc_clear_queue(&icq_list);
|
2011-12-14 07:33:42 +08:00
|
|
|
}
|
|
|
|
|
2021-11-26 19:58:13 +08:00
|
|
|
static struct io_context *alloc_io_context(gfp_t gfp_flags, int node)
|
2008-01-29 21:53:40 +08:00
|
|
|
{
|
2011-06-06 11:11:34 +08:00
|
|
|
struct io_context *ioc;
|
2008-01-29 21:53:40 +08:00
|
|
|
|
2011-12-14 07:33:37 +08:00
|
|
|
ioc = kmem_cache_alloc_node(iocontext_cachep, gfp_flags | __GFP_ZERO,
|
|
|
|
node);
|
|
|
|
if (unlikely(!ioc))
|
2021-11-26 19:58:13 +08:00
|
|
|
return NULL;
|
2011-12-14 07:33:37 +08:00
|
|
|
|
|
|
|
atomic_long_set(&ioc->refcount, 1);
|
2012-03-06 05:15:26 +08:00
|
|
|
atomic_set(&ioc->active_ref, 1);
|
2011-12-14 07:33:37 +08:00
|
|
|
spin_lock_init(&ioc->lock);
|
2018-07-04 01:14:46 +08:00
|
|
|
INIT_RADIX_TREE(&ioc->icq_tree, GFP_ATOMIC);
|
2011-12-14 07:33:41 +08:00
|
|
|
INIT_HLIST_HEAD(&ioc->icq_list);
|
2011-12-14 07:33:39 +08:00
|
|
|
INIT_WORK(&ioc->release_work, ioc_release_fn);
|
2021-11-26 19:58:13 +08:00
|
|
|
return ioc;
|
|
|
|
}
|
|
|
|
|
2021-11-26 19:58:15 +08:00
|
|
|
static struct io_context *create_task_io_context(struct task_struct *task,
|
|
|
|
gfp_t gfp_flags, int node)
|
2021-11-26 19:58:13 +08:00
|
|
|
{
|
|
|
|
struct io_context *ioc;
|
|
|
|
|
|
|
|
ioc = alloc_io_context(gfp_flags, node);
|
|
|
|
if (!ioc)
|
2021-11-26 19:58:15 +08:00
|
|
|
return NULL;
|
2008-01-29 21:53:40 +08:00
|
|
|
|
2011-12-25 21:29:14 +08:00
|
|
|
/*
|
|
|
|
* Try to install. ioc shouldn't be installed if someone else
|
|
|
|
* already did or @task, which isn't %current, is exiting. Note
|
|
|
|
* that we need to allow ioc creation on exiting %current as exit
|
|
|
|
* path may issue IOs from e.g. exit_files(). The exit path is
|
|
|
|
* responsible for not issuing IO after exit_io_context().
|
|
|
|
*/
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
task_lock(task);
|
2011-12-25 21:29:14 +08:00
|
|
|
if (!task->io_context &&
|
|
|
|
(task == current || !(task->flags & PF_EXITING)))
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
task->io_context = ioc;
|
2011-12-14 07:33:40 +08:00
|
|
|
else
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
kmem_cache_free(iocontext_cachep, ioc);
|
2012-05-31 19:39:05 +08:00
|
|
|
|
2021-11-26 19:58:15 +08:00
|
|
|
ioc = task->io_context;
|
|
|
|
if (ioc)
|
|
|
|
get_io_context(ioc);
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
task_unlock(task);
|
2021-11-26 19:58:15 +08:00
|
|
|
return ioc;
|
2008-01-29 21:53:40 +08:00
|
|
|
}
|
|
|
|
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
/**
|
|
|
|
* get_task_io_context - get io_context of a task
|
|
|
|
* @task: task of interest
|
|
|
|
* @gfp_flags: allocation flags, used if allocation is necessary
|
|
|
|
* @node: allocation node, used if allocation is necessary
|
|
|
|
*
|
|
|
|
* Return io_context of @task. If it doesn't exist, it is created with
|
|
|
|
* @gfp_flags and @node. The returned io_context has its reference count
|
|
|
|
* incremented.
|
2008-01-29 21:53:40 +08:00
|
|
|
*
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
* This function always goes through task_lock() and it's better to use
|
2011-12-14 07:33:40 +08:00
|
|
|
* %current->io_context + get_io_context() for %current.
|
2008-01-29 21:53:40 +08:00
|
|
|
*/
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
struct io_context *get_task_io_context(struct task_struct *task,
|
|
|
|
gfp_t gfp_flags, int node)
|
2008-01-29 21:53:40 +08:00
|
|
|
{
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
struct io_context *ioc;
|
2008-01-29 21:53:40 +08:00
|
|
|
|
2015-11-07 08:28:21 +08:00
|
|
|
might_sleep_if(gfpflags_allow_blocking(gfp_flags));
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
|
2021-11-26 19:58:15 +08:00
|
|
|
task_lock(task);
|
|
|
|
ioc = task->io_context;
|
|
|
|
if (unlikely(!ioc)) {
|
block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 07:33:38 +08:00
|
|
|
task_unlock(task);
|
2021-11-26 19:58:15 +08:00
|
|
|
return create_task_io_context(task, gfp_flags, node);
|
|
|
|
}
|
|
|
|
get_io_context(ioc);
|
|
|
|
task_unlock(task);
|
|
|
|
return ioc;
|
2008-01-29 21:53:40 +08:00
|
|
|
}
|
|
|
|
|
2021-11-26 19:58:05 +08:00
|
|
|
int __copy_io(unsigned long clone_flags, struct task_struct *tsk)
|
|
|
|
{
|
|
|
|
struct io_context *ioc = current->io_context;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Share io context with parent, if CLONE_IO is set
|
|
|
|
*/
|
|
|
|
if (clone_flags & CLONE_IO) {
|
2021-11-26 19:58:12 +08:00
|
|
|
atomic_inc(&ioc->active_ref);
|
2021-11-26 19:58:05 +08:00
|
|
|
tsk->io_context = ioc;
|
|
|
|
} else if (ioprio_valid(ioc->ioprio)) {
|
2021-11-26 19:58:14 +08:00
|
|
|
tsk->io_context = alloc_io_context(GFP_KERNEL, NUMA_NO_NODE);
|
|
|
|
if (!tsk->io_context)
|
2021-11-26 19:58:05 +08:00
|
|
|
return -ENOMEM;
|
2021-11-26 19:58:14 +08:00
|
|
|
tsk->io_context->ioprio = ioc->ioprio;
|
2021-11-26 19:58:05 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-12-14 07:33:42 +08:00
|
|
|
/**
|
|
|
|
* ioc_lookup_icq - lookup io_cq from ioc
|
|
|
|
* @q: the associated request_queue
|
|
|
|
*
|
|
|
|
* Look up io_cq associated with @ioc - @q pair from @ioc. Must be called
|
|
|
|
* with @q->queue_lock held.
|
|
|
|
*/
|
2021-11-26 19:58:17 +08:00
|
|
|
struct io_cq *ioc_lookup_icq(struct request_queue *q)
|
2011-12-14 07:33:42 +08:00
|
|
|
{
|
2021-11-26 19:58:17 +08:00
|
|
|
struct io_context *ioc = current->io_context;
|
2011-12-14 07:33:42 +08:00
|
|
|
struct io_cq *icq;
|
|
|
|
|
2018-11-16 03:17:28 +08:00
|
|
|
lockdep_assert_held(&q->queue_lock);
|
2011-12-14 07:33:42 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* icq's are indexed from @ioc using radix tree and hint pointer,
|
|
|
|
* both of which are protected with RCU. All removals are done
|
|
|
|
* holding both q and ioc locks, and we're holding q lock - if we
|
|
|
|
* find a icq which points to us, it's guaranteed to be valid.
|
|
|
|
*/
|
|
|
|
rcu_read_lock();
|
|
|
|
icq = rcu_dereference(ioc->icq_hint);
|
|
|
|
if (icq && icq->q == q)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
icq = radix_tree_lookup(&ioc->icq_tree, q->id);
|
|
|
|
if (icq && icq->q == q)
|
|
|
|
rcu_assign_pointer(ioc->icq_hint, icq); /* allowed to race */
|
|
|
|
else
|
|
|
|
icq = NULL;
|
|
|
|
out:
|
|
|
|
rcu_read_unlock();
|
|
|
|
return icq;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ioc_lookup_icq);
|
|
|
|
|
2011-12-14 07:33:42 +08:00
|
|
|
/**
|
|
|
|
* ioc_create_icq - create and link io_cq
|
|
|
|
* @q: request_queue of interest
|
|
|
|
*
|
2012-03-06 05:15:24 +08:00
|
|
|
* Make sure io_cq linking @ioc and @q exists. If icq doesn't exist, they
|
|
|
|
* will be created using @gfp_mask.
|
2011-12-14 07:33:42 +08:00
|
|
|
*
|
|
|
|
* The caller is responsible for ensuring @ioc won't go away and @q is
|
|
|
|
* alive and will stay alive until this function returns.
|
|
|
|
*/
|
2021-11-26 19:58:16 +08:00
|
|
|
static struct io_cq *ioc_create_icq(struct request_queue *q)
|
2011-12-14 07:33:42 +08:00
|
|
|
{
|
2021-11-26 19:58:16 +08:00
|
|
|
struct io_context *ioc = current->io_context;
|
2011-12-14 07:33:42 +08:00
|
|
|
struct elevator_type *et = q->elevator->type;
|
|
|
|
struct io_cq *icq;
|
|
|
|
|
|
|
|
/* allocate stuff */
|
2021-11-26 19:58:16 +08:00
|
|
|
icq = kmem_cache_alloc_node(et->icq_cache, GFP_ATOMIC | __GFP_ZERO,
|
2011-12-14 07:33:42 +08:00
|
|
|
q->node);
|
|
|
|
if (!icq)
|
|
|
|
return NULL;
|
|
|
|
|
2021-11-26 19:58:16 +08:00
|
|
|
if (radix_tree_maybe_preload(GFP_ATOMIC) < 0) {
|
2011-12-14 07:33:42 +08:00
|
|
|
kmem_cache_free(et->icq_cache, icq);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
icq->ioc = ioc;
|
|
|
|
icq->q = q;
|
|
|
|
INIT_LIST_HEAD(&icq->q_node);
|
|
|
|
INIT_HLIST_NODE(&icq->ioc_node);
|
|
|
|
|
|
|
|
/* lock both q and ioc and try to link @icq */
|
2018-11-16 03:17:28 +08:00
|
|
|
spin_lock_irq(&q->queue_lock);
|
2011-12-14 07:33:42 +08:00
|
|
|
spin_lock(&ioc->lock);
|
|
|
|
|
|
|
|
if (likely(!radix_tree_insert(&ioc->icq_tree, q->id, icq))) {
|
|
|
|
hlist_add_head(&icq->ioc_node, &ioc->icq_list);
|
|
|
|
list_add(&icq->q_node, &q->icq_list);
|
2018-11-02 06:41:41 +08:00
|
|
|
if (et->ops.init_icq)
|
|
|
|
et->ops.init_icq(icq);
|
2011-12-14 07:33:42 +08:00
|
|
|
} else {
|
|
|
|
kmem_cache_free(et->icq_cache, icq);
|
2021-11-26 19:58:17 +08:00
|
|
|
icq = ioc_lookup_icq(q);
|
2011-12-14 07:33:42 +08:00
|
|
|
if (!icq)
|
|
|
|
printk(KERN_ERR "cfq: icq link failed!\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock(&ioc->lock);
|
2018-11-16 03:17:28 +08:00
|
|
|
spin_unlock_irq(&q->queue_lock);
|
2011-12-14 07:33:42 +08:00
|
|
|
radix_tree_preload_end();
|
|
|
|
return icq;
|
|
|
|
}
|
|
|
|
|
2021-11-26 19:58:10 +08:00
|
|
|
struct io_cq *ioc_find_get_icq(struct request_queue *q)
|
|
|
|
{
|
2021-11-26 19:58:15 +08:00
|
|
|
struct io_context *ioc = current->io_context;
|
|
|
|
struct io_cq *icq = NULL;
|
2021-11-26 19:58:10 +08:00
|
|
|
|
2021-11-26 19:58:15 +08:00
|
|
|
if (unlikely(!ioc)) {
|
|
|
|
ioc = create_task_io_context(current, GFP_ATOMIC, q->node);
|
|
|
|
if (!ioc)
|
|
|
|
return NULL;
|
|
|
|
} else {
|
|
|
|
get_io_context(ioc);
|
2021-11-26 19:58:10 +08:00
|
|
|
|
2021-11-26 19:58:15 +08:00
|
|
|
spin_lock_irq(&q->queue_lock);
|
2021-11-26 19:58:17 +08:00
|
|
|
icq = ioc_lookup_icq(q);
|
2021-11-26 19:58:15 +08:00
|
|
|
spin_unlock_irq(&q->queue_lock);
|
|
|
|
}
|
2021-11-26 19:58:10 +08:00
|
|
|
|
|
|
|
if (!icq) {
|
2021-11-26 19:58:16 +08:00
|
|
|
icq = ioc_create_icq(q);
|
2021-11-26 19:58:15 +08:00
|
|
|
if (!icq) {
|
|
|
|
put_io_context(ioc);
|
2021-11-26 19:58:10 +08:00
|
|
|
return NULL;
|
2021-11-26 19:58:15 +08:00
|
|
|
}
|
2021-11-26 19:58:10 +08:00
|
|
|
}
|
|
|
|
return icq;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ioc_find_get_icq);
|
|
|
|
|
2008-02-18 20:45:53 +08:00
|
|
|
static int __init blk_ioc_init(void)
|
2008-01-29 21:53:40 +08:00
|
|
|
{
|
|
|
|
iocontext_cachep = kmem_cache_create("blkdev_ioc",
|
|
|
|
sizeof(struct io_context), 0, SLAB_PANIC, NULL);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
subsys_initcall(blk_ioc_init);
|