linux/drivers/acpi/video_detect.c

889 lines
24 KiB
C
Raw Normal View History

/*
* Copyright (C) 2015 Red Hat Inc.
* Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2008 SuSE Linux Products GmbH
* Thomas Renninger <trenn@suse.de>
*
* May be copied or modified under the terms of the GNU General Public License
*
* video_detect.c:
* After PCI devices are glued with ACPI devices
* acpi_get_pci_dev() can be called to identify ACPI graphics
* devices for which a real graphics card is plugged in
*
* Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B)
* are available, video.ko should be used to handle the device.
*
* Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop,
* sony_acpi,... can take care about backlight brightness.
*
ACPI: video: Add acpi_video_backlight_use_native() helper ATM on x86 laptops where we want userspace to use the acpi_video backlight device we often register both the GPU's native backlight device and acpi_video's firmware acpi_video# backlight device. This relies on userspace preferring firmware type backlight devices over native ones, but registering 2 backlight devices for a single display really is undesirable. On x86 laptops where the native GPU backlight device should be used, the registering of other backlight devices is avoided by their drivers using acpi_video_get_backlight_type() and only registering their backlight if the return value matches their type. acpi_video_get_backlight_type() uses backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native driver is available and will never return native if this returns false. This means that the GPU's native backlight registering code cannot just call acpi_video_get_backlight_type() to determine if it should register its backlight, since acpi_video_get_backlight_type() will never return native until the native backlight has already registered. To fix this add a new internal native function parameter to acpi_video_get_backlight_type(), which when set to true will make acpi_video_get_backlight_type() behave as if a native backlight has already been registered. And add a new acpi_video_backlight_use_native() helper, which sets this to true, for use in native GPU backlight code. Changes in v2: - Replace adding a native parameter to acpi_video_get_backlight_type() with adding a new acpi_video_backlight_use_native() helper. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-15 19:59:48 +08:00
* Backlight drivers can use acpi_video_get_backlight_type() to determine which
* driver should handle the backlight. RAW/GPU-driver backlight drivers must
* use the acpi_video_backlight_use_native() helper for this.
*
* If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
* this file will not be compiled and acpi_video_get_backlight_type() will
* always return acpi_backlight_vendor.
*/
#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/apple-gmux.h>
#include <linux/backlight.h>
#include <linux/dmi.h>
acpi-video-detect: video: Make video_detect code part of the video module This is a preparation patch for the backlight interface selection logic cleanup, there are 2 reasons to not always build the video_detect code into the kernel: 1) In order for the video_detect.c to also deal with / select native backlight interfaces on win8 systems, instead of doing this in video.c where it does not belong, video_detect.c needs to call into the backlight class code. Which cannot be done if it is builtin and the blacklight class is not. 2) Currently all the platform/x86 drivers which have quirks to prefer the vendor driver over acpi-video call acpi_video_unregister_backlight() to remove the acpi-video backlight interface, this logic really belongs in video_detect.c, which will cause video_detect.c to depend on symbols of video.c and video.c already depends on video_detect.c symbols, so they really need to be a single module. Note that this commits make 2 changes so as to maintain 100% kernel commandline compatibility: 1) The __setup call for the acpi_backlight= handling is moved to acpi/util.c as __setup may only be used by code which is alwasy builtin 2) video.c is renamed to acpi_video.c so that it can be combined with video_detect.c into video.ko This commit also makes changes to drivers/platform/x86/Kconfig to ensure that drivers which use acpi_video_backlight_support() from video_detect.c, will not be built-in when acpi_video is not built in. This also changes some "select" uses to "depends on" to avoid dependency loops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-16 22:27:47 +08:00
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/platform_data/x86/nvidia-wmi-ec-backlight.h>
#include <linux/pnp.h>
#include <linux/types.h>
ACPI / video: Fix circular lock dependency issue in the video-detect code Before this commit, the following would happen: a) acpi_video_get_backlight_type() gets called b) acpi_video_get_backlight_type() calls acpi_video_init_backlight_type() c) acpi_video_init_backlight_type() locks its function static init_mutex d) acpi_video_init_backlight_type() calls backlight_register_notifier() e) backlight_register_notifier() takes its notifier-chain lock And when the backlight notifier chain gets called we've: 1) blocking_notifier_call_chain() gets called 2) blocking_notifier_call_chain() takes the notifier-chain lock 3) blocking_notifier_call_chain() calls acpi_video_backlight_notify() 4) acpi_video_backlight_notify() calls acpi_video_get_backlight_type() 5) acpi_video_get_backlight_type() calls acpi_video_init_backlight_type() 6) acpi_video_init_backlight_type() locks its function static init_mutex So in the first call sequence we have: a) init_mutex gets locked b) notifier-chain gets locked and in the second call sequence we have: 1) notifier-chain gets locked 2) init_mutex gets locked And we've a circular locking dependency. This specific locking dependency is fixable without using the big hammer otherwise known as a workqueue, but further analysis shows a similar problem with the backlight notifier chain lock vs register_count_mutex from drivers/acpi/acpi_video.c, and fixing that becomes problematic. So this commit simply fixes this with the big hammer, performance wise this is a non issue as we expect the work to get scheduled exactly zero or one times during normal system use. Fixes: 93a291dfaf9c (ACPI / video: Move backlight notifier to video_detect.c) Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-14 00:53:37 +08:00
#include <linux/workqueue.h>
#include <acpi/video.h>
static enum acpi_backlight_type acpi_backlight_cmdline = acpi_backlight_undef;
static enum acpi_backlight_type acpi_backlight_dmi = acpi_backlight_undef;
acpi-video-detect: video: Make video_detect code part of the video module This is a preparation patch for the backlight interface selection logic cleanup, there are 2 reasons to not always build the video_detect code into the kernel: 1) In order for the video_detect.c to also deal with / select native backlight interfaces on win8 systems, instead of doing this in video.c where it does not belong, video_detect.c needs to call into the backlight class code. Which cannot be done if it is builtin and the blacklight class is not. 2) Currently all the platform/x86 drivers which have quirks to prefer the vendor driver over acpi-video call acpi_video_unregister_backlight() to remove the acpi-video backlight interface, this logic really belongs in video_detect.c, which will cause video_detect.c to depend on symbols of video.c and video.c already depends on video_detect.c symbols, so they really need to be a single module. Note that this commits make 2 changes so as to maintain 100% kernel commandline compatibility: 1) The __setup call for the acpi_backlight= handling is moved to acpi/util.c as __setup may only be used by code which is alwasy builtin 2) video.c is renamed to acpi_video.c so that it can be combined with video_detect.c into video.ko This commit also makes changes to drivers/platform/x86/Kconfig to ensure that drivers which use acpi_video_backlight_support() from video_detect.c, will not be built-in when acpi_video is not built in. This also changes some "select" uses to "depends on" to avoid dependency loops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-16 22:27:47 +08:00
static void acpi_video_parse_cmdline(void)
{
if (!strcmp("vendor", acpi_video_backlight_string))
acpi_backlight_cmdline = acpi_backlight_vendor;
acpi-video-detect: video: Make video_detect code part of the video module This is a preparation patch for the backlight interface selection logic cleanup, there are 2 reasons to not always build the video_detect code into the kernel: 1) In order for the video_detect.c to also deal with / select native backlight interfaces on win8 systems, instead of doing this in video.c where it does not belong, video_detect.c needs to call into the backlight class code. Which cannot be done if it is builtin and the blacklight class is not. 2) Currently all the platform/x86 drivers which have quirks to prefer the vendor driver over acpi-video call acpi_video_unregister_backlight() to remove the acpi-video backlight interface, this logic really belongs in video_detect.c, which will cause video_detect.c to depend on symbols of video.c and video.c already depends on video_detect.c symbols, so they really need to be a single module. Note that this commits make 2 changes so as to maintain 100% kernel commandline compatibility: 1) The __setup call for the acpi_backlight= handling is moved to acpi/util.c as __setup may only be used by code which is alwasy builtin 2) video.c is renamed to acpi_video.c so that it can be combined with video_detect.c into video.ko This commit also makes changes to drivers/platform/x86/Kconfig to ensure that drivers which use acpi_video_backlight_support() from video_detect.c, will not be built-in when acpi_video is not built in. This also changes some "select" uses to "depends on" to avoid dependency loops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-16 22:27:47 +08:00
if (!strcmp("video", acpi_video_backlight_string))
acpi_backlight_cmdline = acpi_backlight_video;
if (!strcmp("native", acpi_video_backlight_string))
acpi_backlight_cmdline = acpi_backlight_native;
if (!strcmp("nvidia_wmi_ec", acpi_video_backlight_string))
acpi_backlight_cmdline = acpi_backlight_nvidia_wmi_ec;
if (!strcmp("apple_gmux", acpi_video_backlight_string))
acpi_backlight_cmdline = acpi_backlight_apple_gmux;
if (!strcmp("none", acpi_video_backlight_string))
acpi_backlight_cmdline = acpi_backlight_none;
acpi-video-detect: video: Make video_detect code part of the video module This is a preparation patch for the backlight interface selection logic cleanup, there are 2 reasons to not always build the video_detect code into the kernel: 1) In order for the video_detect.c to also deal with / select native backlight interfaces on win8 systems, instead of doing this in video.c where it does not belong, video_detect.c needs to call into the backlight class code. Which cannot be done if it is builtin and the blacklight class is not. 2) Currently all the platform/x86 drivers which have quirks to prefer the vendor driver over acpi-video call acpi_video_unregister_backlight() to remove the acpi-video backlight interface, this logic really belongs in video_detect.c, which will cause video_detect.c to depend on symbols of video.c and video.c already depends on video_detect.c symbols, so they really need to be a single module. Note that this commits make 2 changes so as to maintain 100% kernel commandline compatibility: 1) The __setup call for the acpi_backlight= handling is moved to acpi/util.c as __setup may only be used by code which is alwasy builtin 2) video.c is renamed to acpi_video.c so that it can be combined with video_detect.c into video.ko This commit also makes changes to drivers/platform/x86/Kconfig to ensure that drivers which use acpi_video_backlight_support() from video_detect.c, will not be built-in when acpi_video is not built in. This also changes some "select" uses to "depends on" to avoid dependency loops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-16 22:27:47 +08:00
}
static acpi_status
find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
{
struct acpi_device *acpi_dev = acpi_fetch_acpi_dev(handle);
long *cap = context;
struct pci_dev *dev;
static const struct acpi_device_id video_ids[] = {
{ACPI_VIDEO_HID, 0},
{"", 0},
};
if (acpi_dev && !acpi_match_device_ids(acpi_dev, video_ids)) {
dev = acpi_get_pci_dev(handle);
if (!dev)
return AE_OK;
pci_dev_put(dev);
*cap |= acpi_is_video_device(handle);
}
return AE_OK;
}
/* This depends on ACPI_WMI which is X86 only */
#ifdef CONFIG_X86
static bool nvidia_wmi_ec_supported(void)
{
struct wmi_brightness_args args = {
.mode = WMI_BRIGHTNESS_MODE_GET,
.val = 0,
.ret = 0,
};
struct acpi_buffer buf = { (acpi_size)sizeof(args), &args };
acpi_status status;
status = wmi_evaluate_method(WMI_BRIGHTNESS_GUID, 0,
WMI_BRIGHTNESS_METHOD_SOURCE, &buf, &buf);
if (ACPI_FAILURE(status))
return false;
/*
* If brightness is handled by the EC then nvidia-wmi-ec-backlight
* should be used, else the GPU driver(s) should be used.
*/
return args.ret == WMI_BRIGHTNESS_SOURCE_EC;
}
#else
static bool nvidia_wmi_ec_supported(void)
{
return false;
}
#endif
/* Force to use vendor driver when the ACPI device is known to be
* buggy */
static int video_detect_force_vendor(const struct dmi_system_id *d)
{
acpi_backlight_dmi = acpi_backlight_vendor;
return 0;
}
static int video_detect_force_video(const struct dmi_system_id *d)
{
acpi_backlight_dmi = acpi_backlight_video;
return 0;
}
static int video_detect_force_native(const struct dmi_system_id *d)
{
acpi_backlight_dmi = acpi_backlight_native;
return 0;
}
static const struct dmi_system_id video_detect_dmi_table[] = {
/*
* Models which should use the vendor backlight interface,
* because of broken ACPI video backlight control.
*/
platform/x86: acer-wmi: Move backlight DMI quirks to acpi/video_detect.c Move the backlight DMI quirks to acpi/video_detect.c, so that the driver no longer needs to call acpi_video_set_dmi_backlight_type(). acpi_video_set_dmi_backlight_type() is troublesome because it may end up getting called after other backlight drivers have already called acpi_video_get_backlight_type() resulting in the other drivers already being registered even though they should not. Note that even though the DMI quirk table name was video_vendor_dmi_table, 5/6 quirks were actually quirks to use the GPU native backlight. These 5 quirks also had a callback in their dmi_system_id entry which disabled the acer-wmi vendor driver; and any DMI match resulted in: acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); which disabled the acpi_video driver, so only the native driver was left. The new entries for these 5/6 devices correctly marks these as needing the native backlight driver. Also note that other changes in this series change the native backlight drivers to no longer unconditionally register their backlight. Instead these drivers now do this check: if (acpi_video_get_backlight_type(false) != acpi_backlight_native) return 0; /* bail */ which without this patch would have broken these 5/6 "special" quirks. Since I had to look at all the commits adding the quirks anyways, to make sure that I understood the code correctly, I've also added links to the various original bugzillas for these quirks to the new entries. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-06-05 00:28:52 +08:00
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1128309 */
.callback = video_detect_force_vendor,
/* Acer KAV80 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "KAV80"),
},
},
{
.callback = video_detect_force_vendor,
/* Asus UL30VT */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"),
},
},
{
.callback = video_detect_force_vendor,
/* Asus UL30A */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"),
},
},
{
.callback = video_detect_force_vendor,
/* Asus X55U */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X55U"),
},
},
{
/* https://bugs.launchpad.net/bugs/1000146 */
.callback = video_detect_force_vendor,
/* Asus X101CH */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X101CH"),
},
},
{
.callback = video_detect_force_vendor,
/* Asus X401U */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X401U"),
},
},
{
.callback = video_detect_force_vendor,
/* Asus X501U */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X501U"),
},
},
{
/* https://bugs.launchpad.net/bugs/1000146 */
.callback = video_detect_force_vendor,
/* Asus 1015CX */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "1015CX"),
},
},
{
.callback = video_detect_force_vendor,
/* Samsung N150/N210/N220 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"),
DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"),
},
},
{
.callback = video_detect_force_vendor,
/* Samsung NF110/NF210/NF310 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
},
},
{
.callback = video_detect_force_vendor,
/* Samsung NC210 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"),
DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"),
},
},
{
.callback = video_detect_force_vendor,
/* Xiaomi Mi Pad 2 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"),
DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"),
},
},
/*
* Models which should use the vendor backlight interface,
* because of broken native backlight control.
*/
{
.callback = video_detect_force_vendor,
/* Sony Vaio PCG-FRV35 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "PCG-FRV35"),
},
},
/*
* Toshiba models with Transflective display, these need to use
* the toshiba_acpi vendor driver for proper Transflective handling.
*/
{
.callback = video_detect_force_vendor,
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R500"),
},
},
{
.callback = video_detect_force_vendor,
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R600"),
},
},
/*
* Models which need acpi_video backlight control where the GPU drivers
* do not call acpi_video_register_backlight() because no internal panel
* is detected. Typically these are all-in-ones (monitors with builtin
* PC) where the panel connection shows up as regular DP instead of eDP.
*/
{
.callback = video_detect_force_video,
/* Apple iMac14,1 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "iMac14,1"),
},
},
{
.callback = video_detect_force_video,
/* Apple iMac14,2 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "iMac14,2"),
},
},
/*
* These models have a working acpi_video backlight control, and using
* native backlight causes a regression where backlight does not work
* when userspace is not handling brightness key events. Disable
* native_backlight on these to fix this:
* https://bugzilla.kernel.org/show_bug.cgi?id=81691
*/
{
.callback = video_detect_force_video,
/* ThinkPad T420 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T420"),
},
},
{
.callback = video_detect_force_video,
/* ThinkPad T520 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T520"),
},
},
{
.callback = video_detect_force_video,
/* ThinkPad X201s */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"),
},
},
{
.callback = video_detect_force_video,
/* ThinkPad X201T */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
},
},
/* The native backlight controls do not work on some older machines */
{
/* https://bugs.freedesktop.org/show_bug.cgi?id=81515 */
.callback = video_detect_force_video,
/* HP ENVY 15 Notebook */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY 15 Notebook PC"),
},
},
{
.callback = video_detect_force_video,
/* SAMSUNG 870Z5E/880Z5E/680Z5E */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "870Z5E/880Z5E/680Z5E"),
},
},
{
.callback = video_detect_force_video,
/* SAMSUNG 370R4E/370R4V/370R5E/3570RE/370R5V */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME,
"370R4E/370R4V/370R5E/3570RE/370R5V"),
},
},
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1186097 */
.callback = video_detect_force_video,
/* SAMSUNG 3570R/370R/470R/450R/510R/4450RV */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME,
"3570R/370R/470R/450R/510R/4450RV"),
},
},
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1557060 */
.callback = video_detect_force_video,
/* SAMSUNG 670Z5E */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "670Z5E"),
},
},
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1094948 */
.callback = video_detect_force_video,
/* SAMSUNG 730U3E/740U3E */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "730U3E/740U3E"),
},
},
{
/* https://bugs.freedesktop.org/show_bug.cgi?id=87286 */
.callback = video_detect_force_video,
/* SAMSUNG 900X3C/900X3D/900X3E/900X4C/900X4D */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME,
"900X3C/900X3D/900X3E/900X4C/900X4D"),
},
},
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1272633 */
.callback = video_detect_force_video,
/* Dell XPS14 L421X */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "XPS L421X"),
},
},
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1163574 */
.callback = video_detect_force_video,
/* Dell XPS15 L521X */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "XPS L521X"),
},
},
{
/* https://bugzilla.kernel.org/show_bug.cgi?id=108971 */
.callback = video_detect_force_video,
/* SAMSUNG 530U4E/540U4E */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "530U4E/540U4E"),
},
},
{
/* https://bugs.launchpad.net/bugs/1894667 */
.callback = video_detect_force_video,
/* HP 635 Notebook */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP 635 Notebook PC"),
},
},
/* Non win8 machines which need native backlight nevertheless */
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1201530 */
.callback = video_detect_force_native,
/* Lenovo Ideapad S405 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_BOARD_NAME, "Lenovo IdeaPad S405"),
},
},
{
/* https://bugzilla.suse.com/show_bug.cgi?id=1208724 */
.callback = video_detect_force_native,
/* Lenovo Ideapad Z470 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "IdeaPad Z470"),
},
},
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1187004 */
.callback = video_detect_force_native,
/* Lenovo Ideapad Z570 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Ideapad Z570"),
},
},
{
.callback = video_detect_force_native,
/* Lenovo E41-25 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_NAME, "81FS"),
},
},
{
.callback = video_detect_force_native,
/* Lenovo E41-45 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_NAME, "82BK"),
},
},
{
.callback = video_detect_force_native,
/* Lenovo ThinkPad X131e (3371 AMD version) */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_NAME, "3371"),
},
},
{
.callback = video_detect_force_native,
/* Apple iMac11,3 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "iMac11,3"),
},
},
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1217249 */
.callback = video_detect_force_native,
/* Apple MacBook Pro 12,1 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro12,1"),
},
},
{
.callback = video_detect_force_native,
/* Dell Inspiron N4010 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron N4010"),
},
},
{
.callback = video_detect_force_native,
/* Dell Vostro V131 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V131"),
},
},
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1123661 */
.callback = video_detect_force_native,
/* Dell XPS 17 L702X */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Dell System XPS L702X"),
},
},
{
.callback = video_detect_force_native,
/* Dell Precision 7510 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Precision 7510"),
},
},
{
.callback = video_detect_force_native,
/* Dell Studio 1569 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1569"),
},
},
{
.callback = video_detect_force_native,
/* Acer Aspire 3830TG */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3830TG"),
},
},
{
.callback = video_detect_force_native,
/* Acer Aspire 4810T */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 4810T"),
},
},
{
.callback = video_detect_force_native,
/* Acer Aspire 5738z */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
DMI_MATCH(DMI_BOARD_NAME, "JV50"),
},
},
platform/x86: acer-wmi: Move backlight DMI quirks to acpi/video_detect.c Move the backlight DMI quirks to acpi/video_detect.c, so that the driver no longer needs to call acpi_video_set_dmi_backlight_type(). acpi_video_set_dmi_backlight_type() is troublesome because it may end up getting called after other backlight drivers have already called acpi_video_get_backlight_type() resulting in the other drivers already being registered even though they should not. Note that even though the DMI quirk table name was video_vendor_dmi_table, 5/6 quirks were actually quirks to use the GPU native backlight. These 5 quirks also had a callback in their dmi_system_id entry which disabled the acer-wmi vendor driver; and any DMI match resulted in: acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); which disabled the acpi_video driver, so only the native driver was left. The new entries for these 5/6 devices correctly marks these as needing the native backlight driver. Also note that other changes in this series change the native backlight drivers to no longer unconditionally register their backlight. Instead these drivers now do this check: if (acpi_video_get_backlight_type(false) != acpi_backlight_native) return 0; /* bail */ which without this patch would have broken these 5/6 "special" quirks. Since I had to look at all the commits adding the quirks anyways, to make sure that I understood the code correctly, I've also added links to the various original bugzillas for these quirks to the new entries. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-06-05 00:28:52 +08:00
{
/* https://bugzilla.redhat.com/show_bug.cgi?id=1012674 */
.callback = video_detect_force_native,
/* Acer Aspire 5741 */
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5741"),
},
},
{
/* https://bugzilla.kernel.org/show_bug.cgi?id=42993 */
.callback = video_detect_force_native,
/* Acer Aspire 5750 */
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5750"),
},
},
{
/* https://bugzilla.kernel.org/show_bug.cgi?id=42833 */
.callback = video_detect_force_native,
/* Acer Extensa 5235 */
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5235"),
},
},
{
.callback = video_detect_force_native,
/* Acer TravelMate 4750 */
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4750"),
},
},
{
/* https://bugzilla.kernel.org/show_bug.cgi?id=207835 */
.callback = video_detect_force_native,
/* Acer TravelMate 5735Z */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5735Z"),
DMI_MATCH(DMI_BOARD_NAME, "BA51_MV"),
},
},
platform/x86: acer-wmi: Move backlight DMI quirks to acpi/video_detect.c Move the backlight DMI quirks to acpi/video_detect.c, so that the driver no longer needs to call acpi_video_set_dmi_backlight_type(). acpi_video_set_dmi_backlight_type() is troublesome because it may end up getting called after other backlight drivers have already called acpi_video_get_backlight_type() resulting in the other drivers already being registered even though they should not. Note that even though the DMI quirk table name was video_vendor_dmi_table, 5/6 quirks were actually quirks to use the GPU native backlight. These 5 quirks also had a callback in their dmi_system_id entry which disabled the acer-wmi vendor driver; and any DMI match resulted in: acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); which disabled the acpi_video driver, so only the native driver was left. The new entries for these 5/6 devices correctly marks these as needing the native backlight driver. Also note that other changes in this series change the native backlight drivers to no longer unconditionally register their backlight. Instead these drivers now do this check: if (acpi_video_get_backlight_type(false) != acpi_backlight_native) return 0; /* bail */ which without this patch would have broken these 5/6 "special" quirks. Since I had to look at all the commits adding the quirks anyways, to make sure that I understood the code correctly, I've also added links to the various original bugzillas for these quirks to the new entries. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-06-05 00:28:52 +08:00
{
/* https://bugzilla.kernel.org/show_bug.cgi?id=36322 */
.callback = video_detect_force_native,
/* Acer TravelMate 5760 */
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5760"),
},
},
{
.callback = video_detect_force_native,
/* ASUSTeK COMPUTER INC. GA401 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "GA401"),
},
},
{
.callback = video_detect_force_native,
/* ASUSTeK COMPUTER INC. GA502 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "GA502"),
},
},
{
.callback = video_detect_force_native,
/* ASUSTeK COMPUTER INC. GA503 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "GA503"),
},
},
ACPI: video: Add backlight=native DMI quirk for Asus U46E The Asus U46E backlight tables have a set of interesting problems: 1. Its ACPI tables do make _OSI ("Windows 2012") checks, so acpi_osi_is_win8() should return true. But the tables have 2 sets of _OSI calls, one from the usual global _INI method setting a global OSYS variable and a second set of _OSI calls from a MSOS method and the MSOS method is the only one calling _OSI ("Windows 2012"). The MSOS method only gets called in the following cases: 1. From some Asus specific WMI methods 2. From _DOD, which only runs after acpi_video_get_backlight_type() has already been called by the i915 driver 3. From other ACPI video bus methods which never run (see below) 4. From some EC query callbacks So when i915 calls acpi_video_get_backlight_type() MSOS has never run and acpi_osi_is_win8() returns false, so acpi_video_get_backlight_type() returns acpi_video as the desired backlight type, which causes the intel_backlight device to not register. 2. _DOD effectively does this: Return (Package (0x01) { 0x0400 }) causing acpi_video_device_in_dod() to return false, which causes the acpi_video backlight device to not register. Leaving the user with no backlight device at all. Note that before 6.1.y the i915 driver would register the intel_backlight device unconditionally and since that then was the only backlight device userspace would use that. Add a backlight=native DMI quirk for this special laptop to restore the old (and working) behavior of the intel_backlight device registering. Fixes: fb1836c91317 ("ACPI: video: Prefer native over vendor") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-20 01:24:41 +08:00
{
.callback = video_detect_force_native,
/* Asus U46E */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "U46E"),
},
},
{
.callback = video_detect_force_native,
/* Asus UX303UB */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "UX303UB"),
},
},
{
.callback = video_detect_force_native,
/* HP EliteBook 8460p */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 8460p"),
},
},
{
.callback = video_detect_force_native,
/* HP Pavilion g6-1d80nr / B4U19UA */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion g6 Notebook PC"),
DMI_MATCH(DMI_PRODUCT_SKU, "B4U19UA"),
},
},
{
.callback = video_detect_force_native,
/* Samsung N150P */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "N150P"),
DMI_MATCH(DMI_BOARD_NAME, "N150P"),
},
},
{
.callback = video_detect_force_native,
/* Samsung N145P/N250P/N260P */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
},
},
{
.callback = video_detect_force_native,
/* Samsung N250P */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "N250P"),
DMI_MATCH(DMI_BOARD_NAME, "N250P"),
},
},
{
/* https://bugzilla.kernel.org/show_bug.cgi?id=202401 */
.callback = video_detect_force_native,
/* Sony Vaio VPCEH3U1E */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "VPCEH3U1E"),
},
},
{
.callback = video_detect_force_native,
/* Sony Vaio VPCY11S1E */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "VPCY11S1E"),
},
},
ACPI: video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native Some Toshibas have a broken acpi-video interface for brightness control and need a special firmware call on resume to turn the panel back on. So far these have been using the disable_backlight_sysfs_if workaround to deal with this. The recent x86/acpi backlight refactoring has broken this workaround: 1. This workaround relies on acpi_video_get_backlight_type() returning acpi_video so that the acpi_video code actually runs; and 2. this relies on the actual native GPU driver to offer the sysfs backlight interface to userspace. After the refactor this breaks since the native driver will no longer register its backlight-device if acpi_video_get_backlight_type() does not return native and making it return native breaks 1. Keeping the acpi_video backlight handling on resume active, while not using it to set the brightness, is necessary because it does a _BCM call on resume which is necessary to turn the panel back on on resume. Looking at the DSDT shows that this _BCM call results in a Toshiba HCI_SET HCI_LCD_BRIGHTNESS call, which turns the panel back on. This kind of special vendor specific handling really belongs in the vendor specific acpi driver. An earlier patch in this series modifies toshiba_acpi to make the necessary HCI_SET call on resume on affected models. With toshiba_acpi taking care of the HCI_SET call on resume, the acpi_video code no longer needs to call _BCM on resume. So instead of using the (now broken) disable_backlight_sysfs_if workaround, simply setting acpi_backlight=native to disable the broken apci-video interface is sufficient fix things now. After this there are no more users of the disable_backlight_sysfs_if flag and as discussed above the flag also no longer works as intended, so remove the disable_backlight_sysfs_if flag entirely. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Arvid Norlander <lkml@vorpal.se> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-08-29 21:39:23 +08:00
/*
* These Toshibas have a broken acpi-video interface for brightness
* control. They also have an issue where the panel is off after
* suspend until a special firmware call is made to turn it back
* on. This is handled by the toshiba_acpi kernel module, so that
* module must be enabled for these models to work correctly.
*/
{
/* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
.callback = video_detect_force_native,
/* Toshiba Portégé R700 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
},
},
{
/* Portégé: https://bugs.freedesktop.org/show_bug.cgi?id=82634 */
/* Satellite: https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
.callback = video_detect_force_native,
/* Toshiba Satellite/Portégé R830 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "R830"),
},
},
{
.callback = video_detect_force_native,
/* Toshiba Satellite/Portégé Z830 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
},
},
/*
* Models which have nvidia-ec-wmi support, but should not use it.
* Note this indicates a likely firmware bug on these models and should
* be revisited if/when Linux gets support for dynamic mux mode.
*/
{
.callback = video_detect_force_native,
/* Dell G15 5515 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
},
},
{
.callback = video_detect_force_native,
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 15 3535"),
},
},
{ },
};
static bool google_cros_ec_present(void)
{
return acpi_dev_found("GOOG0004") || acpi_dev_found("GOOG000C");
}
/*
* Windows 8 and newer no longer use the ACPI video interface, so it often
* does not work. So on win8+ systems prefer native brightness control.
* Chromebooks should always prefer native backlight control.
*/
static bool prefer_native_over_acpi_video(void)
{
return acpi_osi_is_win8() || google_cros_ec_present();
}
/*
* Determine which type of backlight interface to use on this system,
* First check cmdline, then dmi quirks, then do autodetect.
*/
enum acpi_backlight_type __acpi_video_get_backlight_type(bool native, bool *auto_detect)
{
static DEFINE_MUTEX(init_mutex);
static bool nvidia_wmi_ec_present;
static bool apple_gmux_present;
ACPI: video: Add acpi_video_backlight_use_native() helper ATM on x86 laptops where we want userspace to use the acpi_video backlight device we often register both the GPU's native backlight device and acpi_video's firmware acpi_video# backlight device. This relies on userspace preferring firmware type backlight devices over native ones, but registering 2 backlight devices for a single display really is undesirable. On x86 laptops where the native GPU backlight device should be used, the registering of other backlight devices is avoided by their drivers using acpi_video_get_backlight_type() and only registering their backlight if the return value matches their type. acpi_video_get_backlight_type() uses backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native driver is available and will never return native if this returns false. This means that the GPU's native backlight registering code cannot just call acpi_video_get_backlight_type() to determine if it should register its backlight, since acpi_video_get_backlight_type() will never return native until the native backlight has already registered. To fix this add a new internal native function parameter to acpi_video_get_backlight_type(), which when set to true will make acpi_video_get_backlight_type() behave as if a native backlight has already been registered. And add a new acpi_video_backlight_use_native() helper, which sets this to true, for use in native GPU backlight code. Changes in v2: - Replace adding a native parameter to acpi_video_get_backlight_type() with adding a new acpi_video_backlight_use_native() helper. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-15 19:59:48 +08:00
static bool native_available;
static bool init_done;
static long video_caps;
/* Parse cmdline, dmi and acpi only once */
mutex_lock(&init_mutex);
if (!init_done) {
acpi_video_parse_cmdline();
dmi_check_system(video_detect_dmi_table);
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_video, NULL,
&video_caps, NULL);
nvidia_wmi_ec_present = nvidia_wmi_ec_supported();
apple_gmux_present = apple_gmux_detect(NULL, NULL);
init_done = true;
}
ACPI: video: Add acpi_video_backlight_use_native() helper ATM on x86 laptops where we want userspace to use the acpi_video backlight device we often register both the GPU's native backlight device and acpi_video's firmware acpi_video# backlight device. This relies on userspace preferring firmware type backlight devices over native ones, but registering 2 backlight devices for a single display really is undesirable. On x86 laptops where the native GPU backlight device should be used, the registering of other backlight devices is avoided by their drivers using acpi_video_get_backlight_type() and only registering their backlight if the return value matches their type. acpi_video_get_backlight_type() uses backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native driver is available and will never return native if this returns false. This means that the GPU's native backlight registering code cannot just call acpi_video_get_backlight_type() to determine if it should register its backlight, since acpi_video_get_backlight_type() will never return native until the native backlight has already registered. To fix this add a new internal native function parameter to acpi_video_get_backlight_type(), which when set to true will make acpi_video_get_backlight_type() behave as if a native backlight has already been registered. And add a new acpi_video_backlight_use_native() helper, which sets this to true, for use in native GPU backlight code. Changes in v2: - Replace adding a native parameter to acpi_video_get_backlight_type() with adding a new acpi_video_backlight_use_native() helper. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-15 19:59:48 +08:00
if (native)
native_available = true;
mutex_unlock(&init_mutex);
if (auto_detect)
*auto_detect = false;
/*
* The below heuristics / detection steps are in order of descending
* presedence. The commandline takes presedence over anything else.
*/
if (acpi_backlight_cmdline != acpi_backlight_undef)
return acpi_backlight_cmdline;
/* DMI quirks override any autodetection. */
if (acpi_backlight_dmi != acpi_backlight_undef)
return acpi_backlight_dmi;
if (auto_detect)
*auto_detect = true;
/* Special cases such as nvidia_wmi_ec and apple gmux. */
if (nvidia_wmi_ec_present)
return acpi_backlight_nvidia_wmi_ec;
if (apple_gmux_present)
return acpi_backlight_apple_gmux;
/* Use ACPI video if available, except when native should be preferred. */
if ((video_caps & ACPI_VIDEO_BACKLIGHT) &&
!(native_available && prefer_native_over_acpi_video()))
return acpi_backlight_video;
/* Use native if available */
if (native_available)
return acpi_backlight_native;
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012 There have been 2 separate reports now about a non working "dell_backlight" device getting registered under /sys/class/backlight 1 report for a Raptor Lake based Dell and 1 report for a Meteor Lake (development) platform. On hw from the last 10 years dell-laptop will not register "dell_backlight" because acpi_video_get_backlight_type() will return acpi_backlight_video there if called before the GPU/kms driver loads. So it does not matter if the GPU driver's native backlight is registered after dell-laptop loads. But it seems that on the latest generation laptops the ACPI tables no longer contain acpi_video backlight control support which causes acpi_video_get_backlight_type() to return acpi_backlight_vendor causing "dell_backlight" to get registered if the dell-laptop module is loaded before the GPU/kms driver. Vendor specific backlight control like the "dell_backlight" device is only necessary on quite old hw (from before acpi_video backlight control was introduced). Work around "dell_backlight" registering on very new hw (where acpi_video backlight control seems to be no more) by making acpi_video_get_backlight_type() return acpi_backlight_none instead of acpi_backlight_vendor as final fallback when the ACPI tables have support for Windows 8 or later (laptops from after ~2012). Suggested-by: Matthew Garrett <mjg59@srcf.ucam.org> Reported-by: AceLan Kao <acelan.kao@canonical.com> Closes: https://lore.kernel.org/platform-driver-x86/20230607034331.576623-1-acelan.kao@canonical.com/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-08 17:12:58 +08:00
/*
* The vendor specific BIOS interfaces are only necessary for
* laptops from before ~2008.
*
* For laptops from ~2008 till ~2023 this point is never reached
* because on those (video_caps & ACPI_VIDEO_BACKLIGHT) above is true.
*
* Laptops from after ~2023 no longer support ACPI_VIDEO_BACKLIGHT,
* if this point is reached on those, this likely means that
* the GPU kms driver which sets native_available has not loaded yet.
*
* Returning acpi_backlight_vendor in this case is known to sometimes
* cause a non working vendor specific /sys/class/backlight device to
* get registered.
*
* Return acpi_backlight_none on laptops with ACPI tables written
* for Windows 8 (laptops from after ~2012) to avoid this problem.
*/
if (acpi_osi_is_win8())
return acpi_backlight_none;
/* No ACPI video/native (old hw), use vendor specific fw methods. */
return acpi_backlight_vendor;
}
EXPORT_SYMBOL(__acpi_video_get_backlight_type);