linux/arch/x86/kernel/irq_32.c

176 lines
4.3 KiB
C
Raw Normal View History

/*
* Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
*
* This file contains the lowest level x86-specific interrupt
* entry, irq-stacks and irq statistics code. All the remaining
* irq logic is done by the generic kernel/irq/ code and
* by the x86-specific irq controller code. (e.g. i8259.c and
* io_apic.c.)
*/
#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 05:54:50 +08:00
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
#include <linux/percpu.h>
#include <linux/mm.h>
#include <asm/apic.h>
DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
EXPORT_PER_CPU_SYMBOL(irq_stat);
DEFINE_PER_CPU(struct pt_regs *, irq_regs);
EXPORT_PER_CPU_SYMBOL(irq_regs);
#ifdef CONFIG_DEBUG_STACKOVERFLOW
int sysctl_panic_on_stackoverflow __read_mostly;
/* Debugging check for stack overflow: is there less than 1KB free? */
static int check_stack_overflow(void)
{
long sp;
__asm__ __volatile__("andl %%esp,%0" :
"=r" (sp) : "0" (THREAD_SIZE - 1));
return sp < (sizeof(struct thread_info) + STACK_WARN);
}
static void print_stack_overflow(void)
{
printk(KERN_WARNING "low stack detected by irq handler\n");
dump_stack();
if (sysctl_panic_on_stackoverflow)
panic("low stack detected by irq handler - check messages\n");
}
#else
static inline int check_stack_overflow(void) { return 0; }
static inline void print_stack_overflow(void) { }
#endif
DEFINE_PER_CPU(struct irq_stack *, hardirq_stack);
DEFINE_PER_CPU(struct irq_stack *, softirq_stack);
static void call_on_stack(void *func, void *stack)
{
asm volatile("xchgl %%ebx,%%esp \n"
"call *%%edi \n"
"movl %%ebx,%%esp \n"
: "=b" (stack)
: "0" (stack),
"D"(func)
: "memory", "cc", "edx", "ecx", "eax");
}
static inline void *current_stack(void)
{
return (void *)(current_stack_pointer() & ~(THREAD_SIZE - 1));
}
static inline int
execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq)
{
struct irq_stack *curstk, *irqstk;
u32 *isp, *prev_esp, arg1, arg2;
curstk = (struct irq_stack *) current_stack();
irqstk = __this_cpu_read(hardirq_stack);
/*
* this is where we switch to the IRQ stack. However, if we are
* already using the IRQ stack (because we interrupted a hardirq
* handler) we can't do that and just have to keep using the
* current stack (which is the irq stack already after all)
*/
if (unlikely(curstk == irqstk))
return 0;
isp = (u32 *) ((char *)irqstk + sizeof(*irqstk));
/* Save the next esp at the bottom of the stack */
prev_esp = (u32 *)irqstk;
*prev_esp = current_stack_pointer();
if (unlikely(overflow))
call_on_stack(print_stack_overflow, isp);
asm volatile("xchgl %%ebx,%%esp \n"
"call *%%edi \n"
"movl %%ebx,%%esp \n"
: "=a" (arg1), "=d" (arg2), "=b" (isp)
: "0" (irq), "1" (desc), "2" (isp),
"D" (desc->handle_irq)
: "memory", "cc", "ecx");
return 1;
}
/*
* allocate per-cpu stacks for hardirq and for softirq processing
*/
x86: delete __cpuinit usage from all x86 files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 06:23:59 +08:00
void irq_ctx_init(int cpu)
{
struct irq_stack *irqstk;
if (per_cpu(hardirq_stack, cpu))
return;
irqstk = page_address(alloc_pages_node(cpu_to_node(cpu),
THREADINFO_GFP,
THREAD_SIZE_ORDER));
per_cpu(hardirq_stack, cpu) = irqstk;
irqstk = page_address(alloc_pages_node(cpu_to_node(cpu),
THREADINFO_GFP,
THREAD_SIZE_ORDER));
per_cpu(softirq_stack, cpu) = irqstk;
printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n",
cpu, per_cpu(hardirq_stack, cpu), per_cpu(softirq_stack, cpu));
}
void do_softirq_own_stack(void)
{
struct thread_info *curstk;
struct irq_stack *irqstk;
u32 *isp, *prev_esp;
curstk = current_stack();
irqstk = __this_cpu_read(softirq_stack);
/* build the stack frame on the softirq stack */
isp = (u32 *) ((char *)irqstk + sizeof(*irqstk));
/* Push the previous esp onto the stack */
prev_esp = (u32 *)irqstk;
*prev_esp = current_stack_pointer();
call_on_stack(__do_softirq, isp);
}
bool handle_irq(unsigned irq, struct pt_regs *regs)
{
struct irq_desc *desc;
int overflow;
overflow = check_stack_overflow();
desc = irq_to_desc(irq);
if (unlikely(!desc))
return false;
if (user_mode_vm(regs) || !execute_on_irq_stack(overflow, desc, irq)) {
if (unlikely(overflow))
print_stack_overflow();
desc->handle_irq(irq, desc);
}
return true;
}