linux/arch/arm/boot/dts/imx51.dtsi

438 lines
11 KiB
Plaintext
Raw Normal View History

/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
};
tzic: tz-interrupt-controller@e0000000 {
compatible = "fsl,imx51-tzic", "fsl,tzic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xe0000000 0x4000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&tzic>;
ranges;
aips@70000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x70000000 0x10000000>;
ranges;
spba@70000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x70000000 0x40000>;
ranges;
esdhc@70004000 { /* ESDHC1 */
compatible = "fsl,imx51-esdhc";
reg = <0x70004000 0x4000>;
interrupts = <1>;
status = "disabled";
};
esdhc@70008000 { /* ESDHC2 */
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
bus-width = <4>;
status = "disabled";
};
uart3: serial@7000c000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
status = "disabled";
};
ecspi@70010000 { /* ECSPI1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
reg = <0x70010000 0x4000>;
interrupts = <36>;
status = "disabled";
};
ssi2: ssi@70014000 {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x70014000 0x4000>;
interrupts = <30>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
esdhc@70020000 { /* ESDHC3 */
compatible = "fsl,imx51-esdhc";
reg = <0x70020000 0x4000>;
interrupts = <3>;
bus-width = <4>;
status = "disabled";
};
esdhc@70024000 { /* ESDHC4 */
compatible = "fsl,imx51-esdhc";
reg = <0x70024000 0x4000>;
interrupts = <4>;
bus-width = <4>;
status = "disabled";
};
};
usb@73f80000 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80000 0x0200>;
interrupts = <18>;
status = "disabled";
};
usb@73f80200 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80200 0x0200>;
interrupts = <14>;
status = "disabled";
};
usb@73f80400 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80400 0x0200>;
interrupts = <16>;
status = "disabled";
};
usb@73f80600 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80600 0x0200>;
interrupts = <17>;
status = "disabled";
};
gpio1: gpio@73f84000 {
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
reg = <0x73f84000 0x4000>;
interrupts = <50 51>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@73f88000 {
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
reg = <0x73f88000 0x4000>;
interrupts = <52 53>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@73f8c000 {
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
reg = <0x73f8c000 0x4000>;
interrupts = <54 55>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@73f90000 {
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
reg = <0x73f90000 0x4000>;
interrupts = <56 57>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
wdog@73f98000 { /* WDOG1 */
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
};
wdog@73f9c000 { /* WDOG2 */
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f9c000 0x4000>;
interrupts = <59>;
status = "disabled";
};
iomuxc@73fa8000 {
compatible = "fsl,imx51-iomuxc";
reg = <0x73fa8000 0x4000>;
audmux {
pinctrl_audmux_1: audmuxgrp-1 {
fsl,pins = <
384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */
386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */
389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */
391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */
>;
};
};
fec {
pinctrl_fec_1: fecgrp-1 {
fsl,pins = <
128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */
134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */
146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */
152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */
158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */
165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */
206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */
213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */
293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */
298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */
225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */
231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */
237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */
243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */
250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */
255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */
260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
>;
};
};
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
fsl,pins = <
398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */
394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */
409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */
>;
};
};
esdhc1 {
pinctrl_esdhc1_1: esdhc1grp-1 {
fsl,pins = <
666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */
669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */
672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */
678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */
684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */
691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */
>;
};
};
esdhc2 {
pinctrl_esdhc2_1: esdhc2grp-1 {
fsl,pins = <
704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */
707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */
710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */
712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */
715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */
719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */
>;
};
};
i2c2 {
pinctrl_i2c2_1: i2c2grp-1 {
fsl,pins = <
449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */
454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */
>;
};
};
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */
416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */
418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */
420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */
>;
};
};
uart2 {
pinctrl_uart2_1: uart2grp-1 {
fsl,pins = <
423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */
426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */
>;
};
};
uart3 {
pinctrl_uart3_1: uart3grp-1 {
fsl,pins = <
54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */
59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */
65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */
49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */
>;
};
};
};
uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
status = "disabled";
};
uart2: serial@73fc0000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
status = "disabled";
};
};
aips@80000000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80000000 0x10000000>;
ranges;
ecspi@83fac000 { /* ECSPI2 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
reg = <0x83fac000 0x4000>;
interrupts = <37>;
status = "disabled";
};
sdma@83fb0000 {
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
cspi@83fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
status = "disabled";
};
i2c@83fc4000 { /* I2C2 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
status = "disabled";
};
i2c@83fc8000 { /* I2C1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc8000 0x4000>;
interrupts = <62>;
status = "disabled";
};
ssi1: ssi@83fcc000 {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fcc000 0x4000>;
interrupts = <29>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
audmux@83fd0000 {
compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
reg = <0x83fd0000 0x4000>;
status = "disabled";
};
nand@83fdb000 {
compatible = "fsl,imx51-nand";
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
interrupts = <8>;
status = "disabled";
};
ssi3: ssi@83fe8000 {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fe8000 0x4000>;
interrupts = <96>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
ethernet@83fec000 {
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
status = "disabled";
};
};
};
};