linux/tools/perf/util/evlist.h

423 lines
15 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __PERF_EVLIST_H
#define __PERF_EVLIST_H 1
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/refcount.h>
#include <linux/list.h>
#include <api/fd/array.h>
#include <internal/evlist.h>
#include <internal/evsel.h>
#include "events_stats.h"
#include "evsel.h"
#include <pthread.h>
#include <signal.h>
#include <unistd.h>
struct pollfd;
struct thread_map;
struct perf_cpu_map;
struct record_opts;
/*
* State machine of bkw_mmap_state:
*
* .________________(forbid)_____________.
* | V
* NOTREADY --(0)--> RUNNING --(1)--> DATA_PENDING --(2)--> EMPTY
* ^ ^ | ^ |
* | |__(forbid)____/ |___(forbid)___/|
* | |
* \_________________(3)_______________/
*
* NOTREADY : Backward ring buffers are not ready
* RUNNING : Backward ring buffers are recording
* DATA_PENDING : We are required to collect data from backward ring buffers
* EMPTY : We have collected data from backward ring buffers.
*
* (0): Setup backward ring buffer
* (1): Pause ring buffers for reading
* (2): Read from ring buffers
* (3): Resume ring buffers for recording
*/
enum bkw_mmap_state {
BKW_MMAP_NOTREADY,
BKW_MMAP_RUNNING,
BKW_MMAP_DATA_PENDING,
BKW_MMAP_EMPTY,
};
struct evlist {
struct perf_evlist core;
bool enabled;
int id_pos;
int is_pos;
u64 combined_sample_type;
perf evlist: Setup backward mmap state machine Introduce a bkw_mmap_state state machine to evlist: .________________(forbid)_____________. | V NOTREADY --(0)--> RUNNING --(1)--> DATA_PENDING --(2)--> EMPTY ^ ^ | ^ | | |__(forbid)____/ |___(forbid)___/| | | \_________________(3)_______________/ NOTREADY : Backward ring buffers are not ready RUNNING : Backward ring buffers are recording DATA_PENDING : We are required to collect data from backward ring buffers EMPTY : We have collected data from backward ring buffers. (0): Setup backward ring buffer (1): Pause ring buffers for reading (2): Read from ring buffers (3): Resume ring buffers for recording We can't avoid this complexity. Since we deliberately drop records from overwritable ring buffer, there's no way for us to check remaining from ring buffer itself (by checking head and old pointers). Therefore, we need DATA_PENDING and EMPTY state to help us recording what we have done to the ring buffer. In record__mmap_read_evlist(), drive this state machine from DATA_PENDING to EMPTY. In perf_evlist__mmap_per_evsel(), drive this state machine from NOTREADY to RUNNING when creating backward mmap. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-11-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:42 +08:00
enum bkw_mmap_state bkw_mmap_state;
struct {
int cork_fd;
pid_t pid;
} workload;
struct mmap *mmap;
struct mmap *overwrite_mmap;
struct evsel *selected;
struct events_stats stats;
struct perf_env *env;
perf stat: Support --cputype option for hybrid events In previous patch, we have supported the syntax which enables the event on a specified pmu, such as: cpu_core/<event>/ cpu_atom/<event>/ While this syntax is not very easy for applying on a set of events or applying on a group. In following example, we have to explicitly assign the pmu prefix. # ./perf stat -e '{cpu_core/cycles/,cpu_core/instructions/}' -- sleep 1 Performance counter stats for 'sleep 1': 1,158,545 cpu_core/cycles/ 1,003,113 cpu_core/instructions/ 1.002428712 seconds time elapsed A much easier way is: # ./perf stat --cputype core -e '{cycles,instructions}' -- sleep 1 Performance counter stats for 'sleep 1': 1,101,071 cpu_core/cycles/ 939,892 cpu_core/instructions/ 1.002363142 seconds time elapsed For this example, the '--cputype' enables the events from specified pmu (cpu_core). If '--cputype' conflicts with pmu prefix, '--cputype' is ignored. # ./perf stat --cputype core -e cycles,cpu_atom/instructions/ -a -- sleep 1 Performance counter stats for 'system wide': 21,003,407 cpu_core/cycles/ 367,886 cpu_atom/instructions/ 1.002203520 seconds time elapsed Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210909062215.10278-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-09 14:22:15 +08:00
const char *hybrid_pmu_name;
void (*trace_event_sample_raw)(struct evlist *evlist,
perf report: Display arch specific diagnostic counter sets, starting with s390 On s390 the event bc000 (also named CF_DIAG) extracts the CPU Measurement Facility diagnostic counter sets and displays them as counter number and counter value pairs sorted by counter set number. Output: [root@s35lp76 perf]# ./perf report -D --stdio [00000000] Counterset:0 Counters:6 Counter:000 Value:0x000000000085ec36 Counter:001 Value:0x0000000000796c94 Counter:002 Value:0x0000000000005ada Counter:003 Value:0x0000000000092460 Counter:004 Value:0x0000000000006073 Counter:005 Value:0x00000000001a9a73 [0x000038] Counterset:1 Counters:2 Counter:000 Value:0x000000000007c59f Counter:001 Value:0x000000000002fad6 [0x000050] Counterset:2 Counters:16 Counter:000 Value:000000000000000000 Counter:001 Value:000000000000000000 Counter:002 Value:000000000000000000 Counter:003 Value:000000000000000000 Counter:004 Value:000000000000000000 Counter:005 Value:000000000000000000 Counter:006 Value:000000000000000000 Counter:007 Value:000000000000000000 Counter:008 Value:000000000000000000 Counter:009 Value:000000000000000000 Counter:010 Value:000000000000000000 Counter:011 Value:000000000000000000 Counter:012 Value:000000000000000000 Counter:013 Value:000000000000000000 Counter:014 Value:000000000000000000 Counter:015 Value:000000000000000000 [0x0000d8] Counterset:3 Counters:128 Counter:000 Value:0x000000000000020f Counter:001 Value:0x00000000000001d8 Counter:002 Value:0x000000000000d7fa Counter:003 Value:0x000000000000008b ... The number in brackets is the offset into the raw data field of the sample. New functions trace_event_sample_raw__init() and s390_sample_raw() are introduced in the code path to enable interpretation on non s390 platforms. This event bc000 attached raw data is generated only on s390 platform. Correct display on other platforms requires correct endianness handling. Committer notes: Added a init function that sets up a evlist function pointer to avoid repeated tests on evlist->env and calls to perf_env__name() that involves normalizing, etc, for each PERF_RECORD_SAMPLE. Removed needless __maybe_unused from the trace_event_raw() prototype in session.h, move it to be an static function in evlist. The 'offset' variable is a size_t, not an u64, fix it to avoid this on some arches: CC /tmp/build/perf/util/s390-sample-raw.o util/s390-sample-raw.c: In function 's390_cpumcfdg_testctr': util/s390-sample-raw.c:77:4: error: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'size_t' [-Werror=format=] pr_err("Invalid counter set entry at %#" PRIx64 "\n", ^ cc1: all warnings being treated as errors Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Link: https://lkml.kernel.org/r/9c856ac0-ef23-72b5-901d-a1f815508976@linux.ibm.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: https://lkml.kernel.org/n/tip-s3jhif06et9ug78qhclw41z1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-17 21:37:17 +08:00
union perf_event *event,
struct perf_sample *sample);
perf header: Add infrastructure to record first and last sample time perf report/script/... have a --time option to limit the time range of output. That's very useful to slice large traces, e.g. when processing the output of perf script for some analysis. But right now --time only supports absolute time. Also there is no fast way to get the start/end times of a given trace except for looking at it. This makes it hard to e.g. only decode the first half of the trace, which is useful for parallelization of scripts Another problem is that perf records are variable size and there is no synchronization mechanism. So the only way to find the last sample reliably would be to walk all samples. But we want to avoid that in perf report/... because it is already quite expensive. That is why storing the first sample time and last sample time in perf record is better. This patch creates a new header feature type HEADER_SAMPLE_TIME and related ops. Save the first sample time and the last sample time to the feature section in perf file header. That will be done when, for instance, processing build-ids, where we already have to process all samples to create the build-id table, take advantage of that to further amortize that processing by storing HEADER_SAMPLE_TIME to make 'perf report/script' faster when using --time. Committer testing: After this patch is applied the header is written with zeroes, we need the next patch, for "perf record" to actually write the timestamps: # perf report -D | grep PERF_RECORD_SAMPLE\( 22501155244406 0x44f0 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21be8c5 period: 1 addr: 0 <SNIP> 22501155793625 0x4a30 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21ffd50 period: 2828043 addr: 0 # perf report --header | grep "time of " # time of first sample : 0.000000 # time of last sample : 0.000000 # Changelog: v7: 1. Rebase to latest perf/core branch. 2. Add following clarification in patch description according to Arnaldo's suggestion. "That will be done when, for instance, processing build-ids, where we already have to process all samples to create the build-id table, take advantage of that to further amortize that processing by storing HEADER_SAMPLE_TIME to make 'perf report/script' faster when using --time." v4: Use perf script time style for timestamp printing. Also add with the printing of sample duration. v3: Remove the definitions of first_sample_time/last_sample_time from perf_session. Just define them in perf_evlist Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-08 21:13:41 +08:00
u64 first_sample_time;
u64 last_sample_time;
struct {
pthread_t th;
volatile int done;
} thread;
struct {
int fd; /* control file descriptor */
int ack; /* ack file descriptor for control commands */
int pos; /* index at evlist core object to check signals */
} ctl_fd;
};
struct evsel_str_handler {
perf tools: Save some loops using perf_evlist__id2evsel Since we already ask for PERF_SAMPLE_ID and use it to quickly find the associated evsel, add handler func + data to struct perf_evsel to avoid using chains of if(strcmp(event_name)) and also to avoid all the linear list searches via trace_event_find. To demonstrate the technique convert 'perf sched' to it: # perf sched record sleep 5m And then: Performance counter stats for '/tmp/oldperf sched lat': 646.929438 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,901 page-faults # 0.032 M/sec 1,290,144,450 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,606,158,439 instructions # 1.24 insns per cycle 339,088,395 branches # 524.151 M/sec 4,550,735 branch-misses # 1.34% of all branches 0.647524759 seconds time elapsed Versus: Performance counter stats for 'perf sched lat': 473.564691 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,903 page-faults # 0.044 M/sec 944,367,984 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,442,385,571 instructions # 1.53 insns per cycle 308,383,106 branches # 651.195 M/sec 4,481,784 branch-misses # 1.45% of all branches 0.474215751 seconds time elapsed [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-29 03:57:40 +08:00
const char *name;
void *handler;
};
struct evlist *evlist__new(void);
struct evlist *evlist__new_default(void);
struct evlist *evlist__new_dummy(void);
void evlist__init(struct evlist *evlist, struct perf_cpu_map *cpus,
struct perf_thread_map *threads);
void evlist__exit(struct evlist *evlist);
void evlist__delete(struct evlist *evlist);
void evlist__add(struct evlist *evlist, struct evsel *entry);
void evlist__remove(struct evlist *evlist, struct evsel *evsel);
int __evlist__add_default(struct evlist *evlist, bool precise);
static inline int evlist__add_default(struct evlist *evlist)
{
return __evlist__add_default(evlist, true);
}
int __evlist__add_default_attrs(struct evlist *evlist,
perf stat: Initialize default events wrt exclude_{guest,host} When no event is specified the tools use perf_evlist__add_default(), that will call event_attr_init to initialize the KVM exclusion bits. When the change was made to the tools so that by default guest samples would be excluded, the changes were made just to the parsing routines and to perf_evlist__add_default(), not to perf_evlist__add_attrs, that is used so far just by perf stat to add multiple events, according to the level of detail specified. Recently the tools were changed to reconstruct the event name from all the details in perf_event_attr, not just from .type and .config, but taking into account all the feature bits (.exclude_{guest,host,user,kernel,etc}, .precise_ip, etc). That is when we noticed that the default for perf stat wasn't the one for the rest of the tools, i.e. the .exclude_guest bit wasn't being set. I.e. the default, that doesn't call event_attr_init was showing the :HG modifier: $ perf stat usleep 1 Performance counter stats for 'usleep 1': 0.942119 task-clock # 0.454 CPUs utilized 1 context-switches # 0.001 M/sec 0 CPU-migrations # 0.000 K/sec 126 page-faults # 0.134 M/sec 693,193 cycles:HG # 0.736 GHz [40.11%] 407,461 stalled-cycles-frontend:HG # 58.78% frontend cycles idle [72.29%] 365,403 stalled-cycles-backend:HG # 52.71% backend cycles idle 465,982 instructions:HG # 0.67 insns per cycle # 0.87 stalled cycles per insn 89,760 branches:HG # 95.275 M/sec 6,178 branch-misses:HG # 6.88% of all branches 0.002077228 seconds time elapsed While if one explicitely specifies the same events, which will make the parsing code to be called and thus event_attr_init is called: $ perf stat -e task-clock,context-switches,migrations,page-faults,cycles,stalled-cycles-frontend,stalled-cycles-backend,instructions,branches,branch-misses usleep 1 Performance counter stats for 'usleep 1': 1.040349 task-clock # 0.500 CPUs utilized 2 context-switches # 0.002 M/sec 0 CPU-migrations # 0.000 K/sec 127 page-faults # 0.122 M/sec 587,966 cycles # 0.565 GHz [13.18%] 459,167 stalled-cycles-frontend # 78.09% frontend cycles idle 390,249 stalled-cycles-backend # 66.37% backend cycles idle 504,006 instructions # 0.86 insns per cycle # 0.91 stalled cycles per insn 96,455 branches # 92.714 M/sec 6,522 branch-misses # 6.76% of all branches [96.12%] 0.002078681 seconds time elapsed Fix it by introducing a perf_evlist__add_default_attrs method that will call evlist_attr_init in all the perf_event_attr entries before adding the events. Reported-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-4eysr236r0pgiyum9epwxw7s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-31 00:53:54 +08:00
struct perf_event_attr *attrs, size_t nr_attrs);
#define evlist__add_default_attrs(evlist, array) \
__evlist__add_default_attrs(evlist, array, ARRAY_SIZE(array))
perf stat: Add Topdown metrics events as default events The Topdown Microarchitecture Analysis (TMA) Method is a structured analysis methodology to identify critical performance bottlenecks in out-of-order processors. From the Ice Lake and later platforms, the Topdown information can be retrieved from the dedicated "metrics" register, which isn't impacted by other events. Also, the Topdown metrics support both per thread/process and per core measuring. Adding Topdown metrics events as default events can enrich the default measuring information, and would not cost any extra multiplexing. Introduce arch_evlist__add_default_attrs() to allow architecture specific default events. Add the Topdown metrics events in the X86 specific arch_evlist__add_default_attrs(). Other architectures can add their own default events later separately. With the patch: $ perf stat sleep 1 Performance counter stats for 'sleep 1': 0.82 msec task-clock:u # 0.001 CPUs utilized 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 61 page-faults:u # 0.074 M/sec 319,941 cycles:u # 0.388 GHz 242,802 instructions:u # 0.76 insn per cycle 54,380 branches:u # 66.028 M/sec 4,043 branch-misses:u # 7.43% of all branches 1,585,555 slots:u # 1925.189 M/sec 238,941 topdown-retiring:u # 15.0% retiring 410,378 topdown-bad-spec:u # 25.8% bad speculation 634,222 topdown-fe-bound:u # 39.9% frontend bound 304,675 topdown-be-bound:u # 19.2% backend bound 1.001791625 seconds time elapsed 0.000000000 seconds user 0.001572000 seconds sys Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20210121133752.118327-1-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-21 21:37:52 +08:00
int arch_evlist__add_default_attrs(struct evlist *evlist);
perf parse-events: Architecture specific leader override Currently topdown events must appear after a slots event: $ perf stat -e '{slots,topdown-fe-bound}' /bin/true Performance counter stats for '/bin/true': 3,183,090 slots 986,133 topdown-fe-bound Reversing the events yields: $ perf stat -e '{topdown-fe-bound,slots}' /bin/true Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (topdown-fe-bound). For metrics the order of events is determined by iterating over a hashmap, and so slots isn't guaranteed to be first which can yield this error. Change the set_leader in parse-events, called when a group is closed, so that rather than always making the first event the leader, if the slots event exists then it is made the leader. It is then moved to the head of the evlist otherwise it won't be opened in the correct order. The result is: $ perf stat -e '{topdown-fe-bound,slots}' /bin/true Performance counter stats for '/bin/true': 3,274,795 slots 1,001,702 topdown-fe-bound A problem with this approach is the slots event is identified by name, names can be overwritten like 'cpu/slots,name=foo/' and this causes the leader change to fail. The change also modifies and fixes mixed groups like, with the change: $ perf stat -e '{instructions,slots,topdown-fe-bound}' -a -- sleep 2 Performance counter stats for 'system wide': 5574985410 slots 971981616 instructions 1348461887 topdown-fe-bound 2.001263120 seconds time elapsed Without the change: $ perf stat -e '{instructions,slots,topdown-fe-bound}' -a -- sleep 2 Performance counter stats for 'system wide': <not counted> instructions <not counted> slots <not supported> topdown-fe-bound 2.006247990 seconds time elapsed Something that may be undesirable here is that the events are reordered in the output. Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vineet Singh <vineet.singh@intel.com> Link: http://lore.kernel.org/lkml/20211130174945.247604-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-01 01:49:45 +08:00
struct evsel *arch_evlist__leader(struct list_head *list);
perf stat: Add Topdown metrics events as default events The Topdown Microarchitecture Analysis (TMA) Method is a structured analysis methodology to identify critical performance bottlenecks in out-of-order processors. From the Ice Lake and later platforms, the Topdown information can be retrieved from the dedicated "metrics" register, which isn't impacted by other events. Also, the Topdown metrics support both per thread/process and per core measuring. Adding Topdown metrics events as default events can enrich the default measuring information, and would not cost any extra multiplexing. Introduce arch_evlist__add_default_attrs() to allow architecture specific default events. Add the Topdown metrics events in the X86 specific arch_evlist__add_default_attrs(). Other architectures can add their own default events later separately. With the patch: $ perf stat sleep 1 Performance counter stats for 'sleep 1': 0.82 msec task-clock:u # 0.001 CPUs utilized 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 61 page-faults:u # 0.074 M/sec 319,941 cycles:u # 0.388 GHz 242,802 instructions:u # 0.76 insn per cycle 54,380 branches:u # 66.028 M/sec 4,043 branch-misses:u # 7.43% of all branches 1,585,555 slots:u # 1925.189 M/sec 238,941 topdown-retiring:u # 15.0% retiring 410,378 topdown-bad-spec:u # 25.8% bad speculation 634,222 topdown-fe-bound:u # 39.9% frontend bound 304,675 topdown-be-bound:u # 19.2% backend bound 1.001791625 seconds time elapsed 0.000000000 seconds user 0.001572000 seconds sys Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20210121133752.118327-1-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-21 21:37:52 +08:00
int evlist__add_dummy(struct evlist *evlist);
int evlist__add_sb_event(struct evlist *evlist, struct perf_event_attr *attr,
evsel__sb_cb_t cb, void *data);
void evlist__set_cb(struct evlist *evlist, evsel__sb_cb_t cb, void *data);
int evlist__start_sb_thread(struct evlist *evlist, struct target *target);
void evlist__stop_sb_thread(struct evlist *evlist);
int evlist__add_newtp(struct evlist *evlist, const char *sys, const char *name, void *handler);
int __evlist__set_tracepoints_handlers(struct evlist *evlist,
const struct evsel_str_handler *assocs,
size_t nr_assocs);
#define evlist__set_tracepoints_handlers(evlist, array) \
__evlist__set_tracepoints_handlers(evlist, array, ARRAY_SIZE(array))
int evlist__set_tp_filter(struct evlist *evlist, const char *filter);
int evlist__set_tp_filter_pid(struct evlist *evlist, pid_t pid);
int evlist__set_tp_filter_pids(struct evlist *evlist, size_t npids, pid_t *pids);
int evlist__append_tp_filter(struct evlist *evlist, const char *filter);
int evlist__append_tp_filter_pid(struct evlist *evlist, pid_t pid);
int evlist__append_tp_filter_pids(struct evlist *evlist, size_t npids, pid_t *pids);
struct evsel *evlist__find_tracepoint_by_id(struct evlist *evlist, int id);
struct evsel *evlist__find_tracepoint_by_name(struct evlist *evlist, const char *name);
int evlist__add_pollfd(struct evlist *evlist, int fd);
int evlist__filter_pollfd(struct evlist *evlist, short revents_and_mask);
perf record: Fix continue profiling after draining the buffer Commit da231338ec9c0987 ("perf record: Use an eventfd to wakeup when done") uses eventfd() to solve a rare race where the setting and checking of 'done' which add done_fd to pollfd. When draining buffer, revents of done_fd is 0 and evlist__filter_pollfd function returns a non-zero value. As a result, perf record does not stop profiling. The following simple scenarios can trigger this condition: # sleep 10 & # perf record -p $! After the sleep process exits, perf record should stop profiling and exit. However, perf record keeps running. If pollfd revents contains only POLLERR or POLLHUP, perf record indicates that buffer is draining and need to stop profiling. Use fdarray_flag__nonfilterable() to set done eventfd to nonfilterable objects, so that evlist__filter_pollfd() does not filter and check done eventfd. Fixes: da231338ec9c0987 ("perf record: Use an eventfd to wakeup when done") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: zhangjinhao2@huawei.com Link: http://lore.kernel.org/lkml/20210205065001.23252-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-05 14:50:01 +08:00
#ifdef HAVE_EVENTFD_SUPPORT
int evlist__add_wakeup_eventfd(struct evlist *evlist, int fd);
#endif
int evlist__poll(struct evlist *evlist, int timeout);
struct evsel *evlist__id2evsel(struct evlist *evlist, u64 id);
struct evsel *evlist__id2evsel_strict(struct evlist *evlist, u64 id);
struct perf_sample_id *evlist__id2sid(struct evlist *evlist, u64 id);
void evlist__toggle_bkw_mmap(struct evlist *evlist, enum bkw_mmap_state state);
perf evlist: Setup backward mmap state machine Introduce a bkw_mmap_state state machine to evlist: .________________(forbid)_____________. | V NOTREADY --(0)--> RUNNING --(1)--> DATA_PENDING --(2)--> EMPTY ^ ^ | ^ | | |__(forbid)____/ |___(forbid)___/| | | \_________________(3)_______________/ NOTREADY : Backward ring buffers are not ready RUNNING : Backward ring buffers are recording DATA_PENDING : We are required to collect data from backward ring buffers EMPTY : We have collected data from backward ring buffers. (0): Setup backward ring buffer (1): Pause ring buffers for reading (2): Read from ring buffers (3): Resume ring buffers for recording We can't avoid this complexity. Since we deliberately drop records from overwritable ring buffer, there's no way for us to check remaining from ring buffer itself (by checking head and old pointers). Therefore, we need DATA_PENDING and EMPTY state to help us recording what we have done to the ring buffer. In record__mmap_read_evlist(), drive this state machine from DATA_PENDING to EMPTY. In perf_evlist__mmap_per_evsel(), drive this state machine from NOTREADY to RUNNING when creating backward mmap. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-11-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:42 +08:00
void evlist__mmap_consume(struct evlist *evlist, int idx);
int evlist__open(struct evlist *evlist);
void evlist__close(struct evlist *evlist);
struct callchain_param;
void evlist__set_id_pos(struct evlist *evlist);
void evlist__config(struct evlist *evlist, struct record_opts *opts, struct callchain_param *callchain);
int record_opts__config(struct record_opts *opts);
int evlist__prepare_workload(struct evlist *evlist, struct target *target,
const char *argv[], bool pipe_output,
void (*exec_error)(int signo, siginfo_t *info, void *ucontext));
int evlist__start_workload(struct evlist *evlist);
struct option;
int __evlist__parse_mmap_pages(unsigned int *mmap_pages, const char *str);
int evlist__parse_mmap_pages(const struct option *opt, const char *str, int unset);
unsigned long perf_event_mlock_kb_in_pages(void);
int evlist__mmap_ex(struct evlist *evlist, unsigned int pages,
unsigned int auxtrace_pages,
perf record: Implement --mmap-flush=<number> option Implement a --mmap-flush option that specifies minimal number of bytes that is extracted from mmaped kernel buffer to store into a trace. The default option value is 1 byte what means every time trace writing thread finds some new data in the mmaped buffer the data is extracted, possibly compressed and written to a trace. $ tools/perf/perf record --mmap-flush 1024 -e cycles -- matrix.gcc $ tools/perf/perf record --aio --mmap-flush 1K -e cycles -- matrix.gcc The option is independent from -z setting, doesn't vary with compression level and can serve two purposes. The first purpose is to increase the compression ratio of a trace data. Larger data chunks are compressed more effectively so the implemented option allows specifying data chunk size to compress. Also at some cases executing more write syscalls with smaller data size can take longer than executing less write syscalls with bigger data size due to syscall overhead so extracting bigger data chunks specified by the option value could additionally decrease runtime overhead. The second purpose is to avoid self monitoring live-lock issue in system wide (-a) profiling mode. Profiling in system wide mode with compression (-a -z) can additionally induce data into the kernel buffers along with the data from monitored processes. If performance data rate and volume from the monitored processes is high then trace streaming and compression activity in the tool is also high. High tool process activity can lead to subtle live-lock effect when compression of single new byte from some of mmaped kernel buffer leads to generation of the next single byte at some mmaped buffer. So perf tool process ends up in endless self monitoring. Implemented synch parameter is the mean to force data move independently from the specified flush threshold value. Despite the provided flush value the tool needs capability to unconditionally drain memory buffers, at least in the end of the collection. Committer testing: Running with the default value, i.e. as soon as there is something to read go on consuming, we first write the synthesized events, small chunks of about 128 bytes: # perf trace -m 2048 --call-graph dwarf -e write -- perf record <SNIP> 101.142 ( 0.004 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x210db60, count: 120) = 120 __libc_write (/usr/lib64/libpthread-2.28.so) ion (/home/acme/bin/perf) record__write (inlined) process_synthesized_event (/home/acme/bin/perf) perf_tool__process_synth_event (inlined) perf_event__synthesize_mmap_events (/home/acme/bin/perf) Then we move to reading the mmap buffers consuming the events put there by the kernel perf infrastructure: 107.561 ( 0.005 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befc02000, count: 336) = 336 __libc_write (/usr/lib64/libpthread-2.28.so) ion (/home/acme/bin/perf) record__write (inlined) record__pushfn (/home/acme/bin/perf) perf_mmap__push (/home/acme/bin/perf) record__mmap_read_evlist (inlined) record__mmap_read_all (inlined) __cmd_record (inlined) cmd_record (/home/acme/bin/perf) 12919.953 ( 0.136 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befc83150, count: 184984) = 184984 <SNIP same backtrace as in the 107.561 timestamp> 12920.094 ( 0.155 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befc02150, count: 261816) = 261816 <SNIP same backtrace as in the 107.561 timestamp> 12920.253 ( 0.093 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befb81120, count: 170832) = 170832 <SNIP same backtrace as in the 107.561 timestamp> If we limit it to write only when more than 16MB are available for reading, it throttles that to a quarter of the --mmap-pages set for 'perf record', which by default get to 528384 bytes, found out using 'record -v': mmap flush: 132096 mmap size 528384B With that in place all the writes coming from record__mmap_read_evlist(), i.e. from the mmap buffers setup by the kernel perf infrastructure were at least 132096 bytes long. Trying with a bigger mmap size: perf trace -e write perf record -v -m 2048 --mmap-flush 16M 74982.928 ( 2.471 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff94a6cc000, count: 3580888) = 3580888 74985.406 ( 2.353 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff949ecb000, count: 3453256) = 3453256 74987.764 ( 2.629 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff9496ca000, count: 3859232) = 3859232 74990.399 ( 2.341 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff948ec9000, count: 3769032) = 3769032 74992.744 ( 2.064 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff9486c8000, count: 3310520) = 3310520 74994.814 ( 2.619 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff947ec7000, count: 4194688) = 4194688 74997.439 ( 2.787 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff9476c6000, count: 4029760) = 4029760 Was again limited to a quarter of the mmap size: mmap flush: 2098176 mmap size 8392704B A warning about that would be good to have but can be added later, something like: "max flush is a quarter of the mmap size, if wanting to bump the mmap flush further, bump the mmap size as well using -m/--mmap-pages" Also rename the 'sync' parameters to 'synch' to keep tools/perf building with older glibcs: cc1: warnings being treated as errors builtin-record.c: In function 'record__mmap_read_evlist': builtin-record.c:775: warning: declaration of 'sync' shadows a global declaration /usr/include/unistd.h:933: warning: shadowed declaration is here builtin-record.c: In function 'record__mmap_read_all': builtin-record.c:856: warning: declaration of 'sync' shadows a global declaration /usr/include/unistd.h:933: warning: shadowed declaration is here Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/f6600d72-ecfa-2eb7-7e51-f6954547d500@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:40:26 +08:00
bool auxtrace_overwrite, int nr_cblocks,
int affinity, int flush, int comp_level);
int evlist__mmap(struct evlist *evlist, unsigned int pages);
void evlist__munmap(struct evlist *evlist);
size_t evlist__mmap_size(unsigned long pages);
void evlist__disable(struct evlist *evlist);
void evlist__enable(struct evlist *evlist);
void evlist__toggle_enable(struct evlist *evlist);
void evlist__disable_evsel(struct evlist *evlist, char *evsel_name);
void evlist__enable_evsel(struct evlist *evlist, char *evsel_name);
void evlist__set_selected(struct evlist *evlist, struct evsel *evsel);
int evlist__create_maps(struct evlist *evlist, struct target *target);
int evlist__apply_filters(struct evlist *evlist, struct evsel **err_evsel);
void evlist__set_leader(struct evlist *evlist);
u64 __evlist__combined_sample_type(struct evlist *evlist);
u64 evlist__combined_sample_type(struct evlist *evlist);
u64 evlist__combined_branch_type(struct evlist *evlist);
bool evlist__sample_id_all(struct evlist *evlist);
u16 evlist__id_hdr_size(struct evlist *evlist);
int evlist__parse_sample(struct evlist *evlist, union perf_event *event, struct perf_sample *sample);
int evlist__parse_sample_timestamp(struct evlist *evlist, union perf_event *event, u64 *timestamp);
bool evlist__valid_sample_type(struct evlist *evlist);
bool evlist__valid_sample_id_all(struct evlist *evlist);
bool evlist__valid_read_format(struct evlist *evlist);
void evlist__splice_list_tail(struct evlist *evlist, struct list_head *list);
static inline bool evlist__empty(struct evlist *evlist)
perf sort: Use default sort if evlist is empty Fixes bug noted by Jiri in https://lkml.org/lkml/2017/6/13/755 and caused by commit d49dadea7862 ("perf tools: Make 'trace' or 'trace_fields' sort key default for tracepoint events") not taking into account that evlist is empty in pipe-mode. Before this commit, pipe mode will only show bogus "100.00% N/A" instead of correct output as follows: $ perf record -o - sleep 1 | perf report -i - # To display the perf.data header info, please use --header/--header-only options. # [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] # # Total Lost Samples: 0 # # Samples: 8 of event 'cycles:ppH' # Event count (approx.): 145658 # # Overhead Trace output # ........ ............ # 100.00% N/A Correct output, after patch: $ perf record -o - sleep 1 | perf report -i - # To display the perf.data header info, please use --header/--header-only options. # [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] # # Total Lost Samples: 0 # # Samples: 8 of event 'cycles:ppH' # Event count (approx.): 191331 # # Overhead Command Shared Object Symbol # ........ ....... ................. ................................. # 81.63% sleep libc-2.19.so [.] _exit 13.58% sleep ld-2.19.so [.] do_lookup_x 2.34% sleep [kernel.kallsyms] [k] context_switch 2.34% sleep libc-2.19.so [.] __GI___libc_nanosleep 0.11% perf [kernel.kallsyms] [k] __intel_pmu_enable_a Reported-by: Jiri Olsa <jolsa@kernel.org> Report-Link: https://lkml.kernel.org/r/20170613185422.GA6092@krava Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: d49dadea7862 ("perf tools: Make 'trace' or 'trace_fields' sort key default for tracepoint events") Link: https://lkml.kernel.org/r/20170721051157.47331-1-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-21 13:11:57 +08:00
{
return list_empty(&evlist->core.entries);
perf sort: Use default sort if evlist is empty Fixes bug noted by Jiri in https://lkml.org/lkml/2017/6/13/755 and caused by commit d49dadea7862 ("perf tools: Make 'trace' or 'trace_fields' sort key default for tracepoint events") not taking into account that evlist is empty in pipe-mode. Before this commit, pipe mode will only show bogus "100.00% N/A" instead of correct output as follows: $ perf record -o - sleep 1 | perf report -i - # To display the perf.data header info, please use --header/--header-only options. # [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] # # Total Lost Samples: 0 # # Samples: 8 of event 'cycles:ppH' # Event count (approx.): 145658 # # Overhead Trace output # ........ ............ # 100.00% N/A Correct output, after patch: $ perf record -o - sleep 1 | perf report -i - # To display the perf.data header info, please use --header/--header-only options. # [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] # # Total Lost Samples: 0 # # Samples: 8 of event 'cycles:ppH' # Event count (approx.): 191331 # # Overhead Command Shared Object Symbol # ........ ....... ................. ................................. # 81.63% sleep libc-2.19.so [.] _exit 13.58% sleep ld-2.19.so [.] do_lookup_x 2.34% sleep [kernel.kallsyms] [k] context_switch 2.34% sleep libc-2.19.so [.] __GI___libc_nanosleep 0.11% perf [kernel.kallsyms] [k] __intel_pmu_enable_a Reported-by: Jiri Olsa <jolsa@kernel.org> Report-Link: https://lkml.kernel.org/r/20170613185422.GA6092@krava Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: d49dadea7862 ("perf tools: Make 'trace' or 'trace_fields' sort key default for tracepoint events") Link: https://lkml.kernel.org/r/20170721051157.47331-1-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-21 13:11:57 +08:00
}
static inline struct evsel *evlist__first(struct evlist *evlist)
{
struct perf_evsel *evsel = perf_evlist__first(&evlist->core);
return container_of(evsel, struct evsel, core);
}
static inline struct evsel *evlist__last(struct evlist *evlist)
{
struct perf_evsel *evsel = perf_evlist__last(&evlist->core);
return container_of(evsel, struct evsel, core);
}
int evlist__strerror_open(struct evlist *evlist, int err, char *buf, size_t size);
int evlist__strerror_mmap(struct evlist *evlist, int err, char *buf, size_t size);
bool evlist__can_select_event(struct evlist *evlist, const char *str);
void evlist__to_front(struct evlist *evlist, struct evsel *move_evsel);
/**
* __evlist__for_each_entry - iterate thru all the evsels
* @list: list_head instance to iterate
* @evsel: struct evsel iterator
*/
#define __evlist__for_each_entry(list, evsel) \
list_for_each_entry(evsel, list, core.node)
/**
* evlist__for_each_entry - iterate thru all the evsels
* @evlist: evlist instance to iterate
* @evsel: struct evsel iterator
*/
#define evlist__for_each_entry(evlist, evsel) \
__evlist__for_each_entry(&(evlist)->core.entries, evsel)
/**
* __evlist__for_each_entry_continue - continue iteration thru all the evsels
* @list: list_head instance to iterate
* @evsel: struct evsel iterator
*/
#define __evlist__for_each_entry_continue(list, evsel) \
list_for_each_entry_continue(evsel, list, core.node)
/**
* evlist__for_each_entry_continue - continue iteration thru all the evsels
* @evlist: evlist instance to iterate
* @evsel: struct evsel iterator
*/
#define evlist__for_each_entry_continue(evlist, evsel) \
__evlist__for_each_entry_continue(&(evlist)->core.entries, evsel)
/**
* __evlist__for_each_entry_from - continue iteration from @evsel (included)
* @list: list_head instance to iterate
* @evsel: struct evsel iterator
*/
#define __evlist__for_each_entry_from(list, evsel) \
list_for_each_entry_from(evsel, list, core.node)
/**
* evlist__for_each_entry_from - continue iteration from @evsel (included)
* @evlist: evlist instance to iterate
* @evsel: struct evsel iterator
*/
#define evlist__for_each_entry_from(evlist, evsel) \
__evlist__for_each_entry_from(&(evlist)->core.entries, evsel)
/**
* __evlist__for_each_entry_reverse - iterate thru all the evsels in reverse order
* @list: list_head instance to iterate
* @evsel: struct evsel iterator
*/
#define __evlist__for_each_entry_reverse(list, evsel) \
list_for_each_entry_reverse(evsel, list, core.node)
/**
* evlist__for_each_entry_reverse - iterate thru all the evsels in reverse order
* @evlist: evlist instance to iterate
* @evsel: struct evsel iterator
*/
#define evlist__for_each_entry_reverse(evlist, evsel) \
__evlist__for_each_entry_reverse(&(evlist)->core.entries, evsel)
/**
* __evlist__for_each_entry_safe - safely iterate thru all the evsels
* @list: list_head instance to iterate
* @tmp: struct evsel temp iterator
* @evsel: struct evsel iterator
*/
#define __evlist__for_each_entry_safe(list, tmp, evsel) \
list_for_each_entry_safe(evsel, tmp, list, core.node)
/**
* evlist__for_each_entry_safe - safely iterate thru all the evsels
* @evlist: evlist instance to iterate
* @evsel: struct evsel iterator
* @tmp: struct evsel temp iterator
*/
#define evlist__for_each_entry_safe(evlist, tmp, evsel) \
__evlist__for_each_entry_safe(&(evlist)->core.entries, tmp, evsel)
/** Iterator state for evlist__for_each_cpu */
struct evlist_cpu_iterator {
/** The list being iterated through. */
struct evlist *container;
/** The current evsel of the iterator. */
struct evsel *evsel;
/** The CPU map index corresponding to the evsel->core.cpus for the current CPU. */
int cpu_map_idx;
/**
* The CPU map index corresponding to evlist->core.all_cpus for the
* current CPU. Distinct from cpu_map_idx as the evsel's cpu map may
* contain fewer entries.
*/
int evlist_cpu_map_idx;
/** The number of CPU map entries in evlist->core.all_cpus. */
int evlist_cpu_map_nr;
/** The current CPU of the iterator. */
perf cpumap: Give CPUs their own type A common problem is confusing CPU map indices with the CPU, by wrapping the CPU with a struct then this is avoided. This approach is similar to atomic_t. Committer notes: To make it build with BUILD_BPF_SKEL=1 these files needed the conversions to 'struct perf_cpu' usage: tools/perf/util/bpf_counter.c tools/perf/util/bpf_counter_cgroup.c tools/perf/util/bpf_ftrace.c Also perf_env__get_cpu() was removed back in "perf cpumap: Switch cpu_map__build_map to cpu function". Additionally these needed to be fixed for the ARM builds to complete: tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/pmu.c Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Vineet Singh <vineet.singh@intel.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-05 14:13:51 +08:00
struct perf_cpu cpu;
/** If present, used to set the affinity when switching between CPUs. */
struct affinity *affinity;
};
/**
* evlist__for_each_cpu - without affinity, iterate over the evlist. With
* affinity, iterate over all CPUs and then the evlist
* for each evsel on that CPU. When switching between
* CPUs the affinity is set to the CPU to avoid IPIs
* during syscalls.
* @evlist_cpu_itr: the iterator instance.
* @evlist: evlist instance to iterate.
* @affinity: NULL or used to set the affinity to the current CPU.
*/
#define evlist__for_each_cpu(evlist_cpu_itr, evlist, affinity) \
for ((evlist_cpu_itr) = evlist__cpu_begin(evlist, affinity); \
!evlist_cpu_iterator__end(&evlist_cpu_itr); \
evlist_cpu_iterator__next(&evlist_cpu_itr))
/** Returns an iterator set to the first CPU/evsel of evlist. */
struct evlist_cpu_iterator evlist__cpu_begin(struct evlist *evlist, struct affinity *affinity);
/** Move to next element in iterator, updating CPU, evsel and the affinity. */
void evlist_cpu_iterator__next(struct evlist_cpu_iterator *evlist_cpu_itr);
/** Returns true when iterator is at the end of the CPUs and evlist. */
bool evlist_cpu_iterator__end(const struct evlist_cpu_iterator *evlist_cpu_itr);
struct evsel *evlist__get_tracking_event(struct evlist *evlist);
void evlist__set_tracking_event(struct evlist *evlist, struct evsel *tracking_evsel);
struct evsel *evlist__find_evsel_by_str(struct evlist *evlist, const char *str);
struct evsel *evlist__event2evsel(struct evlist *evlist, union perf_event *event);
bool evlist__exclude_kernel(struct evlist *evlist);
void evlist__force_leader(struct evlist *evlist);
struct evsel *evlist__reset_weak_group(struct evlist *evlist, struct evsel *evsel, bool close);
#define EVLIST_CTL_CMD_ENABLE_TAG "enable"
#define EVLIST_CTL_CMD_DISABLE_TAG "disable"
#define EVLIST_CTL_CMD_ACK_TAG "ack\n"
#define EVLIST_CTL_CMD_SNAPSHOT_TAG "snapshot"
perf tools: Add 'evlist' control command Add a new 'evlist' control command to display all the evlist events. When it is received, perf will scan and print current evlist into perf record terminal. The interface string for control file is: evlist [-v|-g|-F] The syntax follows perf evlist command: -F Show just the sample frequency used for each event. -v Show all fields. -g Show event group information. Example session: terminal 1: # mkfifo control ack # perf record --control=fifo:control,ack -e '{cycles,instructions}' terminal 2: # echo evlist > control terminal 1: cycles instructions dummy:HG terminal 2: # echo 'evlist -v' > control terminal 1: cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: \ IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, \ sample_id_all: 1, exclude_guest: 1 instructions: size: 120, config: 0x1, { sample_period, sample_freq }: 4000, \ sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, freq: 1, \ sample_id_all: 1, exclude_guest: 1 dummy:HG: type: 1, size: 120, config: 0x9, { sample_period, sample_freq }: 4000, \ sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, mmap: 1, \ comm: 1, freq: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, \ bpf_event: 1 terminal 2: # echo 'evlist -g' > control terminal 1: {cycles,instructions} dummy:HG terminal 2: # echo 'evlist -F' > control terminal 1: cycles: sample_freq=4000 instructions: sample_freq=4000 dummy:HG: sample_freq=4000 This new evlist command is handy to get real event names when wildcards are used. Adding evsel_fprintf.c object to python/perf.so build, because it's now evlist.c dependency. Adding PYTHON_PERF define for python/perf.so compilation, so we can use it to compile in only evsel__fprintf from evsel_fprintf.c object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201226232038.390883-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-27 07:20:36 +08:00
#define EVLIST_CTL_CMD_EVLIST_TAG "evlist"
#define EVLIST_CTL_CMD_STOP_TAG "stop"
#define EVLIST_CTL_CMD_PING_TAG "ping"
#define EVLIST_CTL_CMD_MAX_LEN 64
enum evlist_ctl_cmd {
EVLIST_CTL_CMD_UNSUPPORTED = 0,
EVLIST_CTL_CMD_ENABLE,
EVLIST_CTL_CMD_DISABLE,
EVLIST_CTL_CMD_ACK,
EVLIST_CTL_CMD_SNAPSHOT,
perf tools: Add 'evlist' control command Add a new 'evlist' control command to display all the evlist events. When it is received, perf will scan and print current evlist into perf record terminal. The interface string for control file is: evlist [-v|-g|-F] The syntax follows perf evlist command: -F Show just the sample frequency used for each event. -v Show all fields. -g Show event group information. Example session: terminal 1: # mkfifo control ack # perf record --control=fifo:control,ack -e '{cycles,instructions}' terminal 2: # echo evlist > control terminal 1: cycles instructions dummy:HG terminal 2: # echo 'evlist -v' > control terminal 1: cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: \ IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, \ sample_id_all: 1, exclude_guest: 1 instructions: size: 120, config: 0x1, { sample_period, sample_freq }: 4000, \ sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, freq: 1, \ sample_id_all: 1, exclude_guest: 1 dummy:HG: type: 1, size: 120, config: 0x9, { sample_period, sample_freq }: 4000, \ sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, mmap: 1, \ comm: 1, freq: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, \ bpf_event: 1 terminal 2: # echo 'evlist -g' > control terminal 1: {cycles,instructions} dummy:HG terminal 2: # echo 'evlist -F' > control terminal 1: cycles: sample_freq=4000 instructions: sample_freq=4000 dummy:HG: sample_freq=4000 This new evlist command is handy to get real event names when wildcards are used. Adding evsel_fprintf.c object to python/perf.so build, because it's now evlist.c dependency. Adding PYTHON_PERF define for python/perf.so compilation, so we can use it to compile in only evsel__fprintf from evsel_fprintf.c object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201226232038.390883-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-27 07:20:36 +08:00
EVLIST_CTL_CMD_EVLIST,
EVLIST_CTL_CMD_STOP,
EVLIST_CTL_CMD_PING,
};
int evlist__parse_control(const char *str, int *ctl_fd, int *ctl_fd_ack, bool *ctl_fd_close);
void evlist__close_control(int ctl_fd, int ctl_fd_ack, bool *ctl_fd_close);
int evlist__initialize_ctlfd(struct evlist *evlist, int ctl_fd, int ctl_fd_ack);
int evlist__finalize_ctlfd(struct evlist *evlist);
bool evlist__ctlfd_initialized(struct evlist *evlist);
int evlist__ctlfd_update(struct evlist *evlist, struct pollfd *update);
int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd);
int evlist__ctlfd_ack(struct evlist *evlist);
#define EVLIST_ENABLED_MSG "Events enabled\n"
#define EVLIST_DISABLED_MSG "Events disabled\n"
struct evsel *evlist__find_evsel(struct evlist *evlist, int idx);
int evlist__scnprintf_evsels(struct evlist *evlist, size_t size, char *bf);
void evlist__check_mem_load_aux(struct evlist *evlist);
#endif /* __PERF_EVLIST_H */