korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-19 10:14:23 +08:00
Code Issues Packages Projects Releases Wiki Activity
81d33350ba
linux/arch/m68k/coldfire/head.S

299 lines
7.4 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*****************************************************************************/
/*
* head.S -- common startup code for ColdFire CPUs.
*
m68k: init the MMU hardware for the 54xx ColdFire The 54xx ColdFire CPU family has an internal MMU. Up to now though we have only supported running on them with the MMU disabled. Add code to the 54xx ColdFire init sequence to initialize the bootmem used by the usual MMU m68k code for paging init. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-10-14 13:35:37 +08:00
* (C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
/*****************************************************************************/
#include <linux/linkage.h>
m68knommu: put ColdFire head code into .text.head section Switch the ColdFire head start up code to be in the .text.head segment. And make sure that segment is at the start of the final linked text segment. Fixes the linker warnings about section use mis-matches: WARNING: vmlinux.o(.text+0xa8): Section mismatch in reference from the variable _clear_bss to the function .init.text:start_kernel() The function _clear_bss() references the function __init start_kernel(). This is often because _clear_bss lacks a __init annotation or the annotation of start_kernel is wrong. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-11 13:29:36 +08:00
#include <linux/init.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/asm-offsets.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
m68k: init the MMU hardware for the 54xx ColdFire The 54xx ColdFire CPU family has an internal MMU. Up to now though we have only supported running on them with the MMU disabled. Add code to the 54xx ColdFire init sequence to initialize the bootmem used by the usual MMU m68k code for paging init. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-10-14 13:35:37 +08:00
#include <asm/mcfmmu.h>
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 21:08:55 +08:00
#include <asm/thread_info.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*****************************************************************************/
/*
[PATCH] m68knommu: use configurable RAM setup in start up code Change to using a configurable RAM setup in startup code. This cleans up the whole RAM base/sizing issue, and removes a lot of board specific code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 14:33:09 +08:00
* If we don't have a fixed memory size, then lets build in code
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 09:57:33 +08:00
* to auto detect the DRAM size. Obviously this is the preferred
[PATCH] m68knommu: use configurable RAM setup in start up code Change to using a configurable RAM setup in startup code. This cleans up the whole RAM base/sizing issue, and removes a lot of board specific code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 14:33:09 +08:00
* method, and should work for most boards. It won't work for those
* that do not have their RAM starting at address 0, and it only
* works on SDRAM (not boards fitted with SRAM).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[PATCH] m68knommu: use configurable RAM setup in start up code Change to using a configurable RAM setup in startup code. This cleans up the whole RAM base/sizing issue, and removes a lot of board specific code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 14:33:09 +08:00
#if CONFIG_RAMSIZE != 0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.macro GET_MEM_SIZE
[PATCH] m68knommu: use configurable RAM setup in start up code Change to using a configurable RAM setup in startup code. This cleans up the whole RAM base/sizing issue, and removes a lot of board specific code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 14:33:09 +08:00
movel #CONFIG_RAMSIZE,%d0 /* hard coded memory size */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
m68knommu: Add support for the Coldfire 5251/5253 Basic support for the Coldfire 5251/5253. Signed-off-by: Steven king <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-05 23:23:08 +08:00
defined(CONFIG_M5249) || defined(CONFIG_M525x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M5307) || defined(CONFIG_M5407)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Not all these devices have exactly the same DRAM controller,
* but the DCMR register is virtually identical - give or take
* a couple of bits. The only exception is the 5272 devices, their
* DRAM controller is quite different.
*/
.macro GET_MEM_SIZE
m68knommu: clean up use of MBAR for DRAM registers on ColdFire start In some of the RAM size autodetection code on ColdFire CPU startup we reference DRAM registers relative to the MBAR register. Not all of the supported ColdFire CPUs have an MBAR, and currently this works because we fake an MBAR address on those registers. In an effort to clean this up, and eventually remove the fake MBAR setting make the DRAM register address definitions actually contain the MBAR (or IPSBAR as appropriate) value as required. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-06 21:01:46 +08:00
movel MCFSIM_DMR0,%d0 /* get mask for 1st bank */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btst #0,%d0 /* check if region enabled */
beq 1f
andl #0xfffc0000,%d0
beq 1f
addl #0x00040000,%d0 /* convert mask to size */
1:
m68knommu: clean up use of MBAR for DRAM registers on ColdFire start In some of the RAM size autodetection code on ColdFire CPU startup we reference DRAM registers relative to the MBAR register. Not all of the supported ColdFire CPUs have an MBAR, and currently this works because we fake an MBAR address on those registers. In an effort to clean this up, and eventually remove the fake MBAR setting make the DRAM register address definitions actually contain the MBAR (or IPSBAR as appropriate) value as required. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-06 21:01:46 +08:00
movel MCFSIM_DMR1,%d1 /* get mask for 2nd bank */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btst #0,%d1 /* check if region enabled */
beq 2f
m68knommu: clean up use of MBAR for DRAM registers on ColdFire start In some of the RAM size autodetection code on ColdFire CPU startup we reference DRAM registers relative to the MBAR register. Not all of the supported ColdFire CPUs have an MBAR, and currently this works because we fake an MBAR address on those registers. In an effort to clean this up, and eventually remove the fake MBAR setting make the DRAM register address definitions actually contain the MBAR (or IPSBAR as appropriate) value as required. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-06 21:01:46 +08:00
andl #0xfffc0000,%d1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
beq 2f
addl #0x00040000,%d1
addl %d1,%d0 /* total mem size in d0 */
2:
.endm
#elif defined(CONFIG_M5272)
.macro GET_MEM_SIZE
m68knommu: make ColdFire Chip Select register definitions absolute addresses Make all definitions of the ColdFire Chip Select registers absolute addresses. Currently some are relative to the MBAR peripheral region. The various ColdFire parts use different methods to address the internal registers, some are absolute, some are relative to peripheral regions which can be mapped at different address ranges (such as the MBAR and IPSBAR registers). We don't want to deal with this in the code when we are accessing these registers, so make all register definitions the absolute address - factoring out whether it is an offset into a peripheral region. This makes them all consistently defined, and reduces the occasional bugs caused by inconsistent definition of the register addresses. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-14 13:36:02 +08:00
movel MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
andil #0xfffff000,%d0 /* mask out chip select options */
negl %d0 /* negate bits */
.endm
[PATCH] m68knommu: auto detect memory size on M5208EVB board Here is a small patch to automatically detect the DRAM size on m520x. It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board. Signed-off-by: Michael Broughton <mbobowik@telusplanet.net> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04 15:27:29 +08:00
#elif defined(CONFIG_M520x)
.macro GET_MEM_SIZE
clrl %d0
m68knommu: remove MBAR and IPSBAR hacks for the ColdFire 520x CPUs The ColdFire 5207 and 5208 CPUs have fixed peripheral addresses. They do not use the setable peripheral address registers like the MBAR and IPSBAR used on many other ColdFire parts. Don't use fake values of MBAR and IPSBAR when using peripheral addresses for them, there is no need to. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-05 21:50:37 +08:00
movel MCFSIM_SDCS0, %d2 /* Get SDRAM chip select 0 config */
[PATCH] m68knommu: auto detect memory size on M5208EVB board Here is a small patch to automatically detect the DRAM size on m520x. It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board. Signed-off-by: Michael Broughton <mbobowik@telusplanet.net> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04 15:27:29 +08:00
andl #0x1f, %d2 /* Get only the chip select size */
beq 3f /* Check if it is enabled */
addql #1, %d2 /* Form exponent */
moveql #1, %d0
lsll %d2, %d0 /* 2 ^ exponent */
3:
m68knommu: remove MBAR and IPSBAR hacks for the ColdFire 520x CPUs The ColdFire 5207 and 5208 CPUs have fixed peripheral addresses. They do not use the setable peripheral address registers like the MBAR and IPSBAR used on many other ColdFire parts. Don't use fake values of MBAR and IPSBAR when using peripheral addresses for them, there is no need to. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-05 21:50:37 +08:00
movel MCFSIM_SDCS1, %d2 /* Get SDRAM chip select 1 config */
[PATCH] m68knommu: auto detect memory size on M5208EVB board Here is a small patch to automatically detect the DRAM size on m520x. It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board. Signed-off-by: Michael Broughton <mbobowik@telusplanet.net> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04 15:27:29 +08:00
andl #0x1f, %d2 /* Get only the chip select size */
beq 4f /* Check if it is enabled */
addql #1, %d2 /* Form exponent */
moveql #1, %d1
lsll %d2, %d1 /* 2 ^ exponent */
addl %d1, %d0 /* Total size of SDRAM in d0 */
4:
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#else
[PATCH] m68knommu: use configurable RAM setup in start up code Change to using a configurable RAM setup in startup code. This cleans up the whole RAM base/sizing issue, and removes a lot of board specific code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 14:33:09 +08:00
#error "ERROR: I don't know how to probe your boards memory size?"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
/*****************************************************************************/
/*
* Boards and platforms can do specific early hardware setup if
* they need to. Most don't need this, define away if not required.
*/
#ifndef PLATFORM_SETUP
#define PLATFORM_SETUP
#endif
/*****************************************************************************/
.global _start
.global _rambase
.global _ramvec
.global _ramstart
.global _ramend
m68knommu: add uboot commandline argument passing support This patch adds m68knommu support for getting the kernel command line arguments from uboot, including the passing of an initrd image from uboot. We use this on a 5270/5271 based board, and have used it on the 5271evb development board. It is based on a patch found in the linux-2.6-denx git tree, although that tree seems to have had lots of other changes since which are not in the main Linus kernel. I believe this will work on all coldfires, although other m68knommu might be missing the _init_sp stuff in head.S as far as I can tell. I only have the coldfire to test on. Signed-off-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-19 01:49:36 +08:00
#if defined(CONFIG_UBOOT)
.global _init_sp
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*****************************************************************************/
.data
/*
* During startup we store away the RAM setup. These are not in the
* bss, since their values are determined and written before the bss
* has been cleared.
*/
_rambase:
.long 0
_ramvec:
.long 0
_ramstart:
.long 0
_ramend:
.long 0
m68knommu: add uboot commandline argument passing support This patch adds m68knommu support for getting the kernel command line arguments from uboot, including the passing of an initrd image from uboot. We use this on a 5270/5271 based board, and have used it on the 5271evb development board. It is based on a patch found in the linux-2.6-denx git tree, although that tree seems to have had lots of other changes since which are not in the main Linus kernel. I believe this will work on all coldfires, although other m68knommu might be missing the _init_sp stuff in head.S as far as I can tell. I only have the coldfire to test on. Signed-off-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-19 01:49:36 +08:00
#if defined(CONFIG_UBOOT)
_init_sp:
.long 0
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*****************************************************************************/
m68knommu: put ColdFire head code into .text.head section Switch the ColdFire head start up code to be in the .text.head segment. And make sure that segment is at the start of the final linked text segment. Fixes the linker warnings about section use mis-matches: WARNING: vmlinux.o(.text+0xa8): Section mismatch in reference from the variable _clear_bss to the function .init.text:start_kernel() The function _clear_bss() references the function __init start_kernel(). This is often because _clear_bss lacks a __init annotation or the annotation of start_kernel is wrong. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-11 13:29:36 +08:00
__HEAD
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
m68k: init the MMU hardware for the 54xx ColdFire The 54xx ColdFire CPU family has an internal MMU. Up to now though we have only supported running on them with the MMU disabled. Add code to the 54xx ColdFire init sequence to initialize the bootmem used by the usual MMU m68k code for paging init. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-10-14 13:35:37 +08:00
#ifdef CONFIG_MMU
_start0:
jmp _start
.global kernel_pg_dir
.equ kernel_pg_dir,_start0
.equ .,_start0+0x1000
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* This is the codes first entry point. This is where it all
* begins...
*/
_start:
nop /* filler */
movew #0x2700, %sr /* no interrupts */
m68knommu: disable cache early in startup for ColdFire Disbale the CPU cache really early in the ColdFire startup code. We set up some variables for RAM sizing and we want to make they stick in RAM. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-11-15 13:26:28 +08:00
movel #CACHE_INIT,%d0 /* disable cache */
movec %d0,%CACR
nop
m68knommu: add uboot commandline argument passing support This patch adds m68knommu support for getting the kernel command line arguments from uboot, including the passing of an initrd image from uboot. We use this on a 5270/5271 based board, and have used it on the 5271evb development board. It is based on a patch found in the linux-2.6-denx git tree, although that tree seems to have had lots of other changes since which are not in the main Linus kernel. I believe this will work on all coldfires, although other m68knommu might be missing the _init_sp stuff in head.S as far as I can tell. I only have the coldfire to test on. Signed-off-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-19 01:49:36 +08:00
#if defined(CONFIG_UBOOT)
movel %sp,_init_sp /* save initial stack pointer */
#endif
m68knommu: hard set the ColdFire MBAR register on startup The ColdFire MBAR register that holds the mapping of the peripheral region on some ColdFire CPUs is configurable. It can be configured at some address different to that of the bootloader that loaded the kernel. So hard set the MBAR register mapping at kernel startup time. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-11-23 12:46:36 +08:00
#ifdef CONFIG_MBAR
movel #CONFIG_MBAR+1,%d0 /* configured MBAR address */
movec %d0,%MBAR /* set it */
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Do any platform or board specific setup now. Most boards
* don't need anything. Those exceptions are define this in
* their board specific includes.
*/
PLATFORM_SETUP
/*
* Create basic memory configuration. Set VBR accordingly,
* and size memory.
*/
[PATCH] m68knommu: use configurable RAM setup in start up code Change to using a configurable RAM setup in startup code. This cleans up the whole RAM base/sizing issue, and removes a lot of board specific code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 14:33:09 +08:00
movel #CONFIG_VECTORBASE,%a7
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
movec %a7,%VBR /* set vectors addr */
movel %a7,_ramvec
[PATCH] m68knommu: use configurable RAM setup in start up code Change to using a configurable RAM setup in startup code. This cleans up the whole RAM base/sizing issue, and removes a lot of board specific code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 14:33:09 +08:00
movel #CONFIG_RAMBASE,%a7 /* mark the base of RAM */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
movel %a7,_rambase
GET_MEM_SIZE /* macro code determines size */
[PATCH] m68knommu: fix ColdFire startup code to properly handle non 0 based ram Correctly determine the end of ram for ram setups that do not start at base address of 0. Add support for the MOD5272 board, which doesn not have a ram base of 0. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 08:42:52 +08:00
addl %a7,%d0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
movel %d0,_ramend /* set end ram addr */
/*
* Now that we know what the memory is, lets enable cache
m68knommu: clean up ColdFire cache control code The cache control code for the ColdFire CPU's is a big ugly mess of "#ifdef"ery liberally coated with bit constants. Clean it up. The cache controllers in the various ColdFire parts are actually quite similar. Just differing in some bit flags and options supported. Using the header defines now in place it is pretty easy to factor out the small differences and use common setup and flush/invalidate code. I have preserved the cache setups as they where in the old code (except where obviously wrong - like in the case of the 5249). Following from this it should be easy now to extend the possible setups used on the CACHE controllers that support split cacheing or copy-back or write through options. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-09 11:35:55 +08:00
* and get things moving. This is Coldfire CPU specific. Not
* all version cores have identical cache register setup. But
* it is very similar. Define the exact settings in the headers
* then the code here is the same for all.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
m68knommu: clean up ColdFire cache control code The cache control code for the ColdFire CPU's is a big ugly mess of "#ifdef"ery liberally coated with bit constants. Clean it up. The cache controllers in the various ColdFire parts are actually quite similar. Just differing in some bit flags and options supported. Using the header defines now in place it is pretty easy to factor out the small differences and use common setup and flush/invalidate code. I have preserved the cache setups as they where in the old code (except where obviously wrong - like in the case of the 5249). Following from this it should be easy now to extend the possible setups used on the CACHE controllers that support split cacheing or copy-back or write through options. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-09 11:35:55 +08:00
movel #ACR0_MODE,%d0 /* set RAM region for caching */
movec %d0,%ACR0
movel #ACR1_MODE,%d0 /* anything else to cache? */
movec %d0,%ACR1
#ifdef ACR2_MODE
movel #ACR2_MODE,%d0
movec %d0,%ACR2
movel #ACR3_MODE,%d0
movec %d0,%ACR3
#endif
movel #CACHE_MODE,%d0 /* enable cache */
movec %d0,%CACR
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
m68k: init the MMU hardware for the 54xx ColdFire The 54xx ColdFire CPU family has an internal MMU. Up to now though we have only supported running on them with the MMU disabled. Add code to the 54xx ColdFire init sequence to initialize the bootmem used by the usual MMU m68k code for paging init. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-10-14 13:35:37 +08:00
#ifdef CONFIG_MMU
/*
* Identity mapping for the kernel region.
*/
movel #(MMUBASE+1),%d0 /* enable MMUBAR registers */
movec %d0,%MMUBAR
movel #MMUOR_CA,%d0 /* clear TLB entries */
movel %d0,MMUOR
movel #0,%d0 /* set ASID to 0 */
movec %d0,%asid
movel #MMUCR_EN,%d0 /* Enable the identity map */
movel %d0,MMUCR
nop /* sync i-pipeline */
movel #_vstart,%a0 /* jump to "virtual" space */
jmp %a0@
_vstart:
#endif /* CONFIG_MMU */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_ROMFS_FS
/*
* Move ROM filesystem above bss :-)
*/
m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop} BSS_SECTION() provides the __bss_{start,stop} symbols, so there's no need to wrap our own _[se]bss around it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-01 03:46:03 +08:00
lea __bss_start,%a0 /* get start of bss */
lea __bss_stop,%a1 /* set up destination */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
movel %a0,%a2 /* copy of bss start */
movel 8(%a0),%d0 /* get size of ROMFS */
addql #8,%d0 /* allow for rounding */
andl #0xfffffffc, %d0 /* whole words */
addl %d0,%a0 /* copy from end */
addl %d0,%a1 /* copy from end */
movel %a1,_ramstart /* set start of ram */
_copy_romfs:
movel -(%a0),%d0 /* copy dword */
movel %d0,-(%a1)
cmpl %a0,%a2 /* check if at end */
bne _copy_romfs
#else /* CONFIG_ROMFS_FS */
m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop} BSS_SECTION() provides the __bss_{start,stop} symbols, so there's no need to wrap our own _[se]bss around it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-01 03:46:03 +08:00
lea __bss_stop,%a1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
movel %a1,_ramstart
#endif /* CONFIG_ROMFS_FS */
/*
* Zero out the bss region.
*/
m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop} BSS_SECTION() provides the __bss_{start,stop} symbols, so there's no need to wrap our own _[se]bss around it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-01 03:46:03 +08:00
lea __bss_start,%a0 /* get start of bss */
lea __bss_stop,%a1 /* get end of bss */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
clrl %d0 /* set value */
_clear_bss:
movel %d0,(%a0)+ /* clear each word */
cmpl %a0,%a1 /* check if at end */
bne _clear_bss
/*
* Load the current task pointer and stack.
*/
lea init_thread_union,%a0
lea THREAD_SIZE(%a0),%sp
m68k: init the MMU hardware for the 54xx ColdFire The 54xx ColdFire CPU family has an internal MMU. Up to now though we have only supported running on them with the MMU disabled. Add code to the 54xx ColdFire init sequence to initialize the bootmem used by the usual MMU m68k code for paging init. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-10-14 13:35:37 +08:00
#ifdef CONFIG_MMU
.global m68k_cputype
.global m68k_mmutype
.global m68k_fputype
.global m68k_machtype
movel #CPU_COLDFIRE,%d0
movel %d0,m68k_cputype /* Mark us as a ColdFire */
movel #MMU_COLDFIRE,%d0
movel %d0,m68k_mmutype
movel #FPU_COLDFIRE,%d0
movel %d0,m68k_fputype
m68k: set appropriate machine type for m5411x SoC platforms Create a new machine type for platforms based around the ColdFire 5441x SoC family. Set that machine type on startup when building for this platform type. Currently the ColdFire head.S hard codes a M54xx machine type at startup - since that is the only platform type currently supported with MMU enabled. The m5441x has an MMU and this change forms part of the support required to run it with the MMU enabled. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-08-25 21:10:59 +08:00
movel #MACHINE,%d0
movel %d0,m68k_machtype /* Mark machine type */
m68k: init the MMU hardware for the 54xx ColdFire The 54xx ColdFire CPU family has an internal MMU. Up to now though we have only supported running on them with the MMU disabled. Add code to the 54xx ColdFire init sequence to initialize the bootmem used by the usual MMU m68k code for paging init. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-10-14 13:35:37 +08:00
lea init_task,%a2 /* Set "current" init task */
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
m68k: Assorted spelling fixes - s/acccess/access/ - s/accoding/according/ - s/addad/added/ - s/addreess/address/ - s/allocatiom/allocation/ - s/Assember/Assembler/ - s/compactnes/compactness/ - s/conneced/connected/ - s/decending/descending/ - s/diectly/directly/ - s/diplacement/displacement/ Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> [geert: Squashed, fix arch/m68k/ifpsp060/src/pfpsp.S] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-05-21 19:57:20 +08:00
* Assembler start up done, start code proper.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
jsr start_kernel /* start Linux kernel */
_exit:
jmp _exit /* should never get here */
/*****************************************************************************/
Reference in New Issue Copy Permalink