DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
/*
|
|
|
|
* Copyright 2006 Dave Airlie <airlied@linux.ie>
|
|
|
|
* Copyright © 2006-2007 Intel Corporation
|
|
|
|
* Jesse Barnes <jesse.barnes@intel.com>
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice (including the next
|
|
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
|
|
* Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
|
|
* DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* Authors:
|
|
|
|
* Eric Anholt <eric@anholt.net>
|
|
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
|
|
|
#include <linux/slab.h>
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
#include <linux/delay.h>
|
|
|
|
#include "drmP.h"
|
|
|
|
#include "drm.h"
|
|
|
|
#include "drm_crtc.h"
|
2009-07-29 11:31:18 +08:00
|
|
|
#include "drm_edid.h"
|
2010-08-04 20:50:23 +08:00
|
|
|
#include "intel_drv.h"
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
#include "i915_drm.h"
|
|
|
|
#include "i915_drv.h"
|
|
|
|
#include "intel_sdvo_regs.h"
|
|
|
|
|
2010-03-30 14:06:33 +08:00
|
|
|
#define SDVO_TMDS_MASK (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)
|
|
|
|
#define SDVO_RGB_MASK (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1)
|
|
|
|
#define SDVO_LVDS_MASK (SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1)
|
|
|
|
#define SDVO_TV_MASK (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_SVID0)
|
|
|
|
|
|
|
|
#define SDVO_OUTPUT_MASK (SDVO_TMDS_MASK | SDVO_RGB_MASK | SDVO_LVDS_MASK |\
|
|
|
|
SDVO_TV_MASK)
|
|
|
|
|
|
|
|
#define IS_TV(c) (c->output_flag & SDVO_TV_MASK)
|
|
|
|
#define IS_LVDS(c) (c->output_flag & SDVO_LVDS_MASK)
|
2010-08-04 20:50:25 +08:00
|
|
|
#define IS_TV_OR_LVDS(c) (c->output_flag & (SDVO_TV_MASK | SDVO_LVDS_MASK))
|
2010-03-30 14:06:33 +08:00
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-07 18:01:27 +08:00
|
|
|
static const char *tv_format_names[] = {
|
2009-08-24 13:50:26 +08:00
|
|
|
"NTSC_M" , "NTSC_J" , "NTSC_443",
|
|
|
|
"PAL_B" , "PAL_D" , "PAL_G" ,
|
|
|
|
"PAL_H" , "PAL_I" , "PAL_M" ,
|
|
|
|
"PAL_N" , "PAL_NC" , "PAL_60" ,
|
|
|
|
"SECAM_B" , "SECAM_D" , "SECAM_G" ,
|
|
|
|
"SECAM_K" , "SECAM_K1", "SECAM_L" ,
|
|
|
|
"SECAM_60"
|
|
|
|
};
|
|
|
|
|
|
|
|
#define TV_FORMAT_NUM (sizeof(tv_format_names) / sizeof(*tv_format_names))
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
struct intel_sdvo {
|
|
|
|
struct intel_encoder base;
|
|
|
|
|
2009-05-31 03:16:25 +08:00
|
|
|
u8 slave_addr;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
|
|
|
/* Register for the SDVO device: SDVOB or SDVOC */
|
2010-03-26 02:48:48 +08:00
|
|
|
int sdvo_reg;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
/* Active outputs controlled by this SDVO output */
|
|
|
|
uint16_t controlled_output;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
/*
|
|
|
|
* Capabilities of the SDVO device returned by
|
|
|
|
* i830_sdvo_get_capabilities()
|
|
|
|
*/
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
struct intel_sdvo_caps caps;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
|
|
|
/* Pixel clock limitations reported by the SDVO device, in kHz */
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
int pixel_clock_min, pixel_clock_max;
|
|
|
|
|
2009-07-23 17:11:34 +08:00
|
|
|
/*
|
|
|
|
* For multiple function SDVO device,
|
|
|
|
* this is for current attached outputs.
|
|
|
|
*/
|
|
|
|
uint16_t attached_output;
|
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
/**
|
|
|
|
* This is set if we're going to treat the device as TV-out.
|
|
|
|
*
|
|
|
|
* While we have these nice friendly flags for output types that ought
|
|
|
|
* to decide this for us, the S-Video output on our HDMI+S-Video card
|
|
|
|
* shows up as RGB1 (VGA).
|
|
|
|
*/
|
|
|
|
bool is_tv;
|
|
|
|
|
2009-08-24 13:50:26 +08:00
|
|
|
/* This is for current tv format name */
|
2010-08-04 20:50:26 +08:00
|
|
|
int tv_format_index;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
/**
|
|
|
|
* This is set if we treat the device as HDMI, instead of DVI.
|
|
|
|
*/
|
|
|
|
bool is_hdmi;
|
2009-06-30 11:35:35 +08:00
|
|
|
|
2009-05-13 11:20:06 +08:00
|
|
|
/**
|
2010-08-25 17:05:17 +08:00
|
|
|
* This is set if we detect output of sdvo device as LVDS and
|
|
|
|
* have a valid fixed mode to use with the panel.
|
2009-05-13 11:20:06 +08:00
|
|
|
*/
|
|
|
|
bool is_lvds;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2009-06-30 11:35:35 +08:00
|
|
|
/**
|
|
|
|
* This is sdvo fixed pannel mode pointer
|
|
|
|
*/
|
|
|
|
struct drm_display_mode *sdvo_lvds_fixed_mode;
|
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
/*
|
|
|
|
* supported encoding mode, used to determine whether HDMI is
|
|
|
|
* supported
|
|
|
|
*/
|
|
|
|
struct intel_sdvo_encode encode;
|
|
|
|
|
2010-03-26 02:48:48 +08:00
|
|
|
/* DDC bus used by this SDVO encoder */
|
2009-02-03 07:11:52 +08:00
|
|
|
uint8_t ddc_bus;
|
|
|
|
|
2009-09-04 13:07:54 +08:00
|
|
|
/* Mac mini hack -- use the same DDC as the analog connector */
|
|
|
|
struct i2c_adapter *analog_ddc_bus;
|
|
|
|
|
2010-08-25 17:05:17 +08:00
|
|
|
/* Input timings for adjusted_mode */
|
|
|
|
struct intel_sdvo_dtd input_dtd;
|
2010-03-30 14:06:33 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct intel_sdvo_connector {
|
2010-08-04 20:50:24 +08:00
|
|
|
struct intel_connector base;
|
|
|
|
|
2010-03-30 14:06:33 +08:00
|
|
|
/* Mark the type of connector */
|
|
|
|
uint16_t output_flag;
|
|
|
|
|
|
|
|
/* This contains all current supported TV format */
|
2010-08-04 20:50:26 +08:00
|
|
|
u8 tv_format_supported[TV_FORMAT_NUM];
|
2010-03-30 14:06:33 +08:00
|
|
|
int format_supported_num;
|
2010-08-04 20:50:28 +08:00
|
|
|
struct drm_property *tv_format;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2009-09-10 15:45:46 +08:00
|
|
|
/* add the property for the SDVO-TV */
|
2010-08-04 20:50:28 +08:00
|
|
|
struct drm_property *left;
|
|
|
|
struct drm_property *right;
|
|
|
|
struct drm_property *top;
|
|
|
|
struct drm_property *bottom;
|
|
|
|
struct drm_property *hpos;
|
|
|
|
struct drm_property *vpos;
|
|
|
|
struct drm_property *contrast;
|
|
|
|
struct drm_property *saturation;
|
|
|
|
struct drm_property *hue;
|
|
|
|
struct drm_property *sharpness;
|
|
|
|
struct drm_property *flicker_filter;
|
|
|
|
struct drm_property *flicker_filter_adaptive;
|
|
|
|
struct drm_property *flicker_filter_2d;
|
|
|
|
struct drm_property *tv_chroma_filter;
|
|
|
|
struct drm_property *tv_luma_filter;
|
2010-08-04 20:50:29 +08:00
|
|
|
struct drm_property *dot_crawl;
|
2009-09-10 15:45:46 +08:00
|
|
|
|
|
|
|
/* add the property for the SDVO-TV/LVDS */
|
2010-08-04 20:50:28 +08:00
|
|
|
struct drm_property *brightness;
|
2009-09-10 15:45:46 +08:00
|
|
|
|
|
|
|
/* Add variable to record current setting for the above property */
|
|
|
|
u32 left_margin, right_margin, top_margin, bottom_margin;
|
2010-08-04 20:50:28 +08:00
|
|
|
|
2009-09-10 15:45:46 +08:00
|
|
|
/* this is to get the range of margin.*/
|
|
|
|
u32 max_hscan, max_vscan;
|
|
|
|
u32 max_hpos, cur_hpos;
|
|
|
|
u32 max_vpos, cur_vpos;
|
|
|
|
u32 cur_brightness, max_brightness;
|
|
|
|
u32 cur_contrast, max_contrast;
|
|
|
|
u32 cur_saturation, max_saturation;
|
|
|
|
u32 cur_hue, max_hue;
|
2010-08-04 20:50:28 +08:00
|
|
|
u32 cur_sharpness, max_sharpness;
|
|
|
|
u32 cur_flicker_filter, max_flicker_filter;
|
|
|
|
u32 cur_flicker_filter_adaptive, max_flicker_filter_adaptive;
|
|
|
|
u32 cur_flicker_filter_2d, max_flicker_filter_2d;
|
|
|
|
u32 cur_tv_chroma_filter, max_tv_chroma_filter;
|
|
|
|
u32 cur_tv_luma_filter, max_tv_luma_filter;
|
2010-08-04 20:50:29 +08:00
|
|
|
u32 cur_dot_crawl, max_dot_crawl;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
};
|
|
|
|
|
2010-09-14 23:46:59 +08:00
|
|
|
static struct intel_sdvo *to_intel_sdvo(struct drm_encoder *encoder)
|
2010-08-04 20:50:23 +08:00
|
|
|
{
|
2010-09-09 22:14:28 +08:00
|
|
|
return container_of(encoder, struct intel_sdvo, base.base);
|
2010-08-04 20:50:23 +08:00
|
|
|
}
|
|
|
|
|
2010-09-09 23:20:55 +08:00
|
|
|
static struct intel_sdvo *intel_attached_sdvo(struct drm_connector *connector)
|
|
|
|
{
|
|
|
|
return container_of(intel_attached_encoder(connector),
|
|
|
|
struct intel_sdvo, base);
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
static struct intel_sdvo_connector *to_intel_sdvo_connector(struct drm_connector *connector)
|
|
|
|
{
|
|
|
|
return container_of(to_intel_connector(connector), struct intel_sdvo_connector, base);
|
|
|
|
}
|
|
|
|
|
2009-07-23 17:11:34 +08:00
|
|
|
static bool
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags);
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool
|
|
|
|
intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
|
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector,
|
|
|
|
int type);
|
|
|
|
static bool
|
|
|
|
intel_sdvo_create_enhance_property(struct intel_sdvo *intel_sdvo,
|
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector);
|
2009-07-23 17:11:34 +08:00
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
/**
|
|
|
|
* Writes the SDVOB or SDVOC with the given value, but always writes both
|
|
|
|
* SDVOB and SDVOC to work around apparent hardware issues (according to
|
|
|
|
* comments in the BIOS).
|
|
|
|
*/
|
2010-08-04 20:50:23 +08:00
|
|
|
static void intel_sdvo_write_sdvox(struct intel_sdvo *intel_sdvo, u32 val)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-09-09 22:14:28 +08:00
|
|
|
struct drm_device *dev = intel_sdvo->base.base.dev;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
u32 bval = val, cval = val;
|
|
|
|
int i;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->sdvo_reg == PCH_SDVOB) {
|
|
|
|
I915_WRITE(intel_sdvo->sdvo_reg, val);
|
|
|
|
I915_READ(intel_sdvo->sdvo_reg);
|
2010-03-30 15:11:33 +08:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->sdvo_reg == SDVOB) {
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
cval = I915_READ(SDVOC);
|
|
|
|
} else {
|
|
|
|
bval = I915_READ(SDVOB);
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Write the registers twice for luck. Sometimes,
|
|
|
|
* writing them only once doesn't appear to 'stick'.
|
|
|
|
* The BIOS does this too. Yay, magic
|
|
|
|
*/
|
|
|
|
for (i = 0; i < 2; i++)
|
|
|
|
{
|
|
|
|
I915_WRITE(SDVOB, bval);
|
|
|
|
I915_READ(SDVOB);
|
|
|
|
I915_WRITE(SDVOC, cval);
|
|
|
|
I915_READ(SDVOC);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool intel_sdvo_read_byte(struct intel_sdvo *intel_sdvo, u8 addr, u8 *ch)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
u8 out_buf[2] = { addr, 0 };
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
u8 buf[2];
|
|
|
|
struct i2c_msg msgs[] = {
|
|
|
|
{
|
2010-08-04 20:50:23 +08:00
|
|
|
.addr = intel_sdvo->slave_addr >> 1,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
.flags = 0,
|
|
|
|
.len = 1,
|
|
|
|
.buf = out_buf,
|
|
|
|
},
|
|
|
|
{
|
2010-08-04 20:50:23 +08:00
|
|
|
.addr = intel_sdvo->slave_addr >> 1,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
.flags = I2C_M_RD,
|
|
|
|
.len = 1,
|
|
|
|
.buf = buf,
|
|
|
|
}
|
|
|
|
};
|
2010-08-04 20:50:25 +08:00
|
|
|
int ret;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if ((ret = i2c_transfer(intel_sdvo->base.i2c_bus, msgs, 2)) == 2)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
|
|
|
*ch = buf[0];
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2009-07-20 13:48:04 +08:00
|
|
|
DRM_DEBUG_KMS("i2c transfer returned %d\n", ret);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool intel_sdvo_write_byte(struct intel_sdvo *intel_sdvo, int addr, u8 ch)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
u8 out_buf[2] = { addr, ch };
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
struct i2c_msg msgs[] = {
|
|
|
|
{
|
2010-08-04 20:50:23 +08:00
|
|
|
.addr = intel_sdvo->slave_addr >> 1,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
.flags = 0,
|
|
|
|
.len = 2,
|
|
|
|
.buf = out_buf,
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return i2c_transfer(intel_sdvo->base.i2c_bus, msgs, 1) == 1;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
|
|
|
|
/** Mapping of command numbers to names, for debug output */
|
2009-02-10 05:02:42 +08:00
|
|
|
static const struct _sdvo_cmd_name {
|
2009-02-03 07:11:52 +08:00
|
|
|
u8 cmd;
|
2010-08-07 18:01:27 +08:00
|
|
|
const char *name;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
} sdvo_cmd_names[] = {
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT),
|
2009-02-03 07:11:52 +08:00
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_POWER_STATES),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POWER_STATE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODER_POWER_STATE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DISPLAY_POWER_STATE),
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH),
|
2009-02-03 07:11:52 +08:00
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS),
|
2010-08-04 20:50:28 +08:00
|
|
|
|
2009-09-10 15:45:46 +08:00
|
|
|
/* Add the op code for SDVO enhancements */
|
2010-08-04 20:50:28 +08:00
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HPOS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HPOS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HPOS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_VPOS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_VPOS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_VPOS),
|
2009-09-10 15:45:46 +08:00
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SATURATION),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SATURATION),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SATURATION),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HUE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HUE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HUE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_CONTRAST),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CONTRAST),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTRAST),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_BRIGHTNESS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_BRIGHTNESS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_BRIGHTNESS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_H),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_H),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_H),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_V),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_V),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_V),
|
2010-08-04 20:50:28 +08:00
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_ADAPTIVE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_2D),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_2D),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_2D),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SHARPNESS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SHARPNESS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SHARPNESS),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DOT_CRAWL),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DOT_CRAWL),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_CHROMA_FILTER),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_CHROMA_FILTER),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_CHROMA_FILTER),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_LUMA_FILTER),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_LUMA_FILTER),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_LUMA_FILTER),
|
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
/* HDMI op code */
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_PIXEL_REPLI),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PIXEL_REPLI),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY_CAP),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_COLORIMETRY),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_AUDIO_STAT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_STAT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INDEX),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_INDEX),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INFO),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_AV_SPLIT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_AV_SPLIT),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_TXRATE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_TXRATE),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_DATA),
|
|
|
|
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA),
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
};
|
|
|
|
|
2010-03-30 15:11:33 +08:00
|
|
|
#define IS_SDVOB(reg) (reg == SDVOB || reg == PCH_SDVOB)
|
2010-08-04 20:50:23 +08:00
|
|
|
#define SDVO_NAME(svdo) (IS_SDVOB((svdo)->sdvo_reg) ? "SDVOB" : "SDVOC")
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static void intel_sdvo_debug_write(struct intel_sdvo *intel_sdvo, u8 cmd,
|
2010-08-04 20:50:25 +08:00
|
|
|
const void *args, int args_len)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
2009-07-20 13:48:04 +08:00
|
|
|
DRM_DEBUG_KMS("%s: W: %02X ",
|
2010-08-04 20:50:23 +08:00
|
|
|
SDVO_NAME(intel_sdvo), cmd);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
for (i = 0; i < args_len; i++)
|
2009-06-02 14:12:00 +08:00
|
|
|
DRM_LOG_KMS("%02X ", ((u8 *)args)[i]);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
for (; i < 8; i++)
|
2009-06-02 14:12:00 +08:00
|
|
|
DRM_LOG_KMS(" ");
|
2010-06-28 19:54:56 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(sdvo_cmd_names); i++) {
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
if (cmd == sdvo_cmd_names[i].cmd) {
|
2009-06-02 14:12:00 +08:00
|
|
|
DRM_LOG_KMS("(%s)", sdvo_cmd_names[i].name);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2010-06-28 19:54:56 +08:00
|
|
|
if (i == ARRAY_SIZE(sdvo_cmd_names))
|
2009-06-02 14:12:00 +08:00
|
|
|
DRM_LOG_KMS("(%02X)", cmd);
|
|
|
|
DRM_LOG_KMS("\n");
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd,
|
|
|
|
const void *args, int args_len)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
for (i = 0; i < args_len; i++) {
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_write_byte(intel_sdvo, SDVO_I2C_ARG_0 - i,
|
|
|
|
((u8*)args)[i]))
|
|
|
|
return false;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_write_byte(intel_sdvo, SDVO_I2C_OPCODE, cmd);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static const char *cmd_status_names[] = {
|
|
|
|
"Power on",
|
|
|
|
"Success",
|
|
|
|
"Not supported",
|
|
|
|
"Invalid arg",
|
|
|
|
"Pending",
|
|
|
|
"Target not specified",
|
|
|
|
"Scaling not supported"
|
|
|
|
};
|
|
|
|
|
2010-09-10 02:06:13 +08:00
|
|
|
static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo,
|
|
|
|
void *response, int response_len)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-09-10 02:06:13 +08:00
|
|
|
u8 retry = 5;
|
|
|
|
u8 status;
|
2009-03-24 14:02:40 +08:00
|
|
|
int i;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-09-10 02:06:13 +08:00
|
|
|
/*
|
|
|
|
* The documentation states that all commands will be
|
|
|
|
* processed within 15µs, and that we need only poll
|
|
|
|
* the status byte a maximum of 3 times in order for the
|
|
|
|
* command to be complete.
|
|
|
|
*
|
|
|
|
* Check 5 times in case the hardware failed to read the docs.
|
|
|
|
*/
|
|
|
|
do {
|
|
|
|
if (!intel_sdvo_read_byte(intel_sdvo,
|
|
|
|
SDVO_I2C_CMD_STATUS,
|
|
|
|
&status))
|
|
|
|
return false;
|
|
|
|
} while (status == SDVO_CMD_STATUS_PENDING && --retry);
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(intel_sdvo));
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP)
|
2009-06-02 14:12:00 +08:00
|
|
|
DRM_LOG_KMS("(%s)", cmd_status_names[status]);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
else
|
2009-06-02 14:12:00 +08:00
|
|
|
DRM_LOG_KMS("(??? %d)", status);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-09-10 02:06:13 +08:00
|
|
|
if (status != SDVO_CMD_STATUS_SUCCESS)
|
|
|
|
goto log_fail;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-09-10 02:06:13 +08:00
|
|
|
/* Read the command response */
|
|
|
|
for (i = 0; i < response_len; i++) {
|
|
|
|
if (!intel_sdvo_read_byte(intel_sdvo,
|
|
|
|
SDVO_I2C_RETURN_0 + i,
|
|
|
|
&((u8 *)response)[i]))
|
|
|
|
goto log_fail;
|
|
|
|
DRM_LOG_KMS("%02X ", ((u8 *)response)[i]);
|
|
|
|
}
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-09-10 02:06:13 +08:00
|
|
|
for (; i < 8; i++)
|
|
|
|
DRM_LOG_KMS(" ");
|
|
|
|
DRM_LOG_KMS("\n");
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-09-10 02:06:13 +08:00
|
|
|
return true;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-09-10 02:06:13 +08:00
|
|
|
log_fail:
|
|
|
|
DRM_LOG_KMS("\n");
|
|
|
|
return false;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2008-12-19 04:18:47 +08:00
|
|
|
static int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
|
|
|
if (mode->clock >= 100000)
|
|
|
|
return 1;
|
|
|
|
else if (mode->clock >= 50000)
|
|
|
|
return 2;
|
|
|
|
else
|
|
|
|
return 4;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2010-01-08 10:58:19 +08:00
|
|
|
* Try to read the response after issuie the DDC switch command. But it
|
|
|
|
* is noted that we must do the action of reading response and issuing DDC
|
|
|
|
* switch command in one I2C transaction. Otherwise when we try to start
|
|
|
|
* another I2C transaction after issuing the DDC bus switch, it will be
|
|
|
|
* switched to the internal SDVO register.
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
*/
|
2010-09-15 02:11:56 +08:00
|
|
|
static int intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo,
|
|
|
|
u8 target)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-01-08 10:58:19 +08:00
|
|
|
u8 out_buf[2], cmd_buf[2], ret_value[2], ret;
|
|
|
|
struct i2c_msg msgs[] = {
|
|
|
|
{
|
2010-08-04 20:50:23 +08:00
|
|
|
.addr = intel_sdvo->slave_addr >> 1,
|
2010-01-08 10:58:19 +08:00
|
|
|
.flags = 0,
|
|
|
|
.len = 2,
|
|
|
|
.buf = out_buf,
|
|
|
|
},
|
|
|
|
/* the following two are to read the response */
|
|
|
|
{
|
2010-08-04 20:50:23 +08:00
|
|
|
.addr = intel_sdvo->slave_addr >> 1,
|
2010-01-08 10:58:19 +08:00
|
|
|
.flags = 0,
|
|
|
|
.len = 1,
|
|
|
|
.buf = cmd_buf,
|
|
|
|
},
|
|
|
|
{
|
2010-08-04 20:50:23 +08:00
|
|
|
.addr = intel_sdvo->slave_addr >> 1,
|
2010-01-08 10:58:19 +08:00
|
|
|
.flags = I2C_M_RD,
|
|
|
|
.len = 1,
|
|
|
|
.buf = ret_value,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_debug_write(intel_sdvo, SDVO_CMD_SET_CONTROL_BUS_SWITCH,
|
2010-09-15 02:11:56 +08:00
|
|
|
&target, 1);
|
2010-01-08 10:58:19 +08:00
|
|
|
/* write the DDC switch command argument */
|
2010-09-15 02:11:56 +08:00
|
|
|
if (!intel_sdvo_write_byte(intel_sdvo, SDVO_I2C_ARG_0, target))
|
|
|
|
return -EIO;
|
2010-01-08 10:58:19 +08:00
|
|
|
|
|
|
|
out_buf[0] = SDVO_I2C_OPCODE;
|
|
|
|
out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH;
|
|
|
|
cmd_buf[0] = SDVO_I2C_CMD_STATUS;
|
|
|
|
cmd_buf[1] = 0;
|
|
|
|
ret_value[0] = 0;
|
|
|
|
ret_value[1] = 0;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
ret = i2c_transfer(intel_sdvo->base.i2c_bus, msgs, 3);
|
2010-09-15 02:11:56 +08:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2010-01-08 10:58:19 +08:00
|
|
|
if (ret != 3) {
|
|
|
|
/* failure in I2C transfer */
|
|
|
|
DRM_DEBUG_KMS("I2c transfer returned %d\n", ret);
|
2010-09-15 02:11:56 +08:00
|
|
|
return -EIO;
|
2010-01-08 10:58:19 +08:00
|
|
|
}
|
|
|
|
if (ret_value[0] != SDVO_CMD_STATUS_SUCCESS) {
|
|
|
|
DRM_DEBUG_KMS("DDC switch command returns response %d\n",
|
2010-09-15 02:11:56 +08:00
|
|
|
ret_value[0]);
|
|
|
|
return -EIO;
|
2010-01-08 10:58:19 +08:00
|
|
|
}
|
2010-09-15 02:11:56 +08:00
|
|
|
|
|
|
|
return 0;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool intel_sdvo_set_value(struct intel_sdvo *intel_sdvo, u8 cmd, const void *data, int len)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_write_cmd(intel_sdvo, cmd, data, len))
|
|
|
|
return false;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_read_response(intel_sdvo, NULL, 0);
|
|
|
|
}
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool
|
|
|
|
intel_sdvo_get_value(struct intel_sdvo *intel_sdvo, u8 cmd, void *value, int len)
|
|
|
|
{
|
|
|
|
if (!intel_sdvo_write_cmd(intel_sdvo, cmd, NULL, 0))
|
|
|
|
return false;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_read_response(intel_sdvo, value, len);
|
|
|
|
}
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool intel_sdvo_set_target_input(struct intel_sdvo *intel_sdvo)
|
|
|
|
{
|
|
|
|
struct intel_sdvo_set_target_input_args targets = {0};
|
|
|
|
return intel_sdvo_set_value(intel_sdvo,
|
|
|
|
SDVO_CMD_SET_TARGET_INPUT,
|
|
|
|
&targets, sizeof(targets));
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Return whether each input is trained.
|
|
|
|
*
|
|
|
|
* This function is making an assumption about the layout of the response,
|
|
|
|
* which should be checked against the docs.
|
|
|
|
*/
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_get_trained_inputs(struct intel_sdvo *intel_sdvo, bool *input_1, bool *input_2)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
|
|
|
struct intel_sdvo_get_trained_inputs_response response;
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_TRAINED_INPUTS,
|
|
|
|
&response, sizeof(response)))
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
*input_1 = response.input0_trained;
|
|
|
|
*input_2 = response.input1_trained;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_set_active_outputs(struct intel_sdvo *intel_sdvo,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
u16 outputs)
|
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_set_value(intel_sdvo,
|
|
|
|
SDVO_CMD_SET_ACTIVE_OUTPUTS,
|
|
|
|
&outputs, sizeof(outputs));
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_set_encoder_power_state(struct intel_sdvo *intel_sdvo,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
int mode)
|
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
u8 state = SDVO_ENCODER_STATE_ON;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case DRM_MODE_DPMS_ON:
|
|
|
|
state = SDVO_ENCODER_STATE_ON;
|
|
|
|
break;
|
|
|
|
case DRM_MODE_DPMS_STANDBY:
|
|
|
|
state = SDVO_ENCODER_STATE_STANDBY;
|
|
|
|
break;
|
|
|
|
case DRM_MODE_DPMS_SUSPEND:
|
|
|
|
state = SDVO_ENCODER_STATE_SUSPEND;
|
|
|
|
break;
|
|
|
|
case DRM_MODE_DPMS_OFF:
|
|
|
|
state = SDVO_ENCODER_STATE_OFF;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_set_value(intel_sdvo,
|
|
|
|
SDVO_CMD_SET_ENCODER_POWER_STATE, &state, sizeof(state));
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_get_input_pixel_clock_range(struct intel_sdvo *intel_sdvo,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
int *clock_min,
|
|
|
|
int *clock_max)
|
|
|
|
{
|
|
|
|
struct intel_sdvo_pixel_clock_range clocks;
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_get_value(intel_sdvo,
|
|
|
|
SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE,
|
|
|
|
&clocks, sizeof(clocks)))
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
/* Convert the values from units of 10 kHz to kHz. */
|
|
|
|
*clock_min = clocks.min * 10;
|
|
|
|
*clock_max = clocks.max * 10;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_set_target_output(struct intel_sdvo *intel_sdvo,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
u16 outputs)
|
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_set_value(intel_sdvo,
|
|
|
|
SDVO_CMD_SET_TARGET_OUTPUT,
|
|
|
|
&outputs, sizeof(outputs));
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_set_timing(struct intel_sdvo *intel_sdvo, u8 cmd,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
struct intel_sdvo_dtd *dtd)
|
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_set_value(intel_sdvo, cmd, &dtd->part1, sizeof(dtd->part1)) &&
|
|
|
|
intel_sdvo_set_value(intel_sdvo, cmd + 1, &dtd->part2, sizeof(dtd->part2));
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_set_input_timing(struct intel_sdvo *intel_sdvo,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
struct intel_sdvo_dtd *dtd)
|
|
|
|
{
|
2010-08-04 20:50:23 +08:00
|
|
|
return intel_sdvo_set_timing(intel_sdvo,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd);
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_set_output_timing(struct intel_sdvo *intel_sdvo,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
struct intel_sdvo_dtd *dtd)
|
|
|
|
{
|
2010-08-04 20:50:23 +08:00
|
|
|
return intel_sdvo_set_timing(intel_sdvo,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd);
|
|
|
|
}
|
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
static bool
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_create_preferred_input_timing(struct intel_sdvo *intel_sdvo,
|
2009-02-03 07:11:52 +08:00
|
|
|
uint16_t clock,
|
|
|
|
uint16_t width,
|
|
|
|
uint16_t height)
|
|
|
|
{
|
|
|
|
struct intel_sdvo_preferred_input_timing_args args;
|
|
|
|
|
2009-03-24 14:02:42 +08:00
|
|
|
memset(&args, 0, sizeof(args));
|
2009-02-03 07:11:52 +08:00
|
|
|
args.clock = clock;
|
|
|
|
args.width = width;
|
|
|
|
args.height = height;
|
2009-03-24 14:02:42 +08:00
|
|
|
args.interlace = 0;
|
2009-06-30 11:35:35 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->is_lvds &&
|
|
|
|
(intel_sdvo->sdvo_lvds_fixed_mode->hdisplay != width ||
|
|
|
|
intel_sdvo->sdvo_lvds_fixed_mode->vdisplay != height))
|
2009-06-30 11:35:35 +08:00
|
|
|
args.scaled = 1;
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_set_value(intel_sdvo,
|
|
|
|
SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING,
|
|
|
|
&args, sizeof(args));
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_get_preferred_input_timing(struct intel_sdvo *intel_sdvo,
|
2009-02-03 07:11:52 +08:00
|
|
|
struct intel_sdvo_dtd *dtd)
|
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1,
|
|
|
|
&dtd->part1, sizeof(dtd->part1)) &&
|
|
|
|
intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2,
|
|
|
|
&dtd->part2, sizeof(dtd->part2));
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_set_clock_rate_mult(struct intel_sdvo *intel_sdvo, u8 val)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd,
|
2010-08-04 20:50:25 +08:00
|
|
|
const struct drm_display_mode *mode)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2009-02-03 07:11:52 +08:00
|
|
|
uint16_t width, height;
|
|
|
|
uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len;
|
|
|
|
uint16_t h_sync_offset, v_sync_offset;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
width = mode->crtc_hdisplay;
|
|
|
|
height = mode->crtc_vdisplay;
|
|
|
|
|
|
|
|
/* do some mode translations */
|
|
|
|
h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start;
|
|
|
|
h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
|
|
|
|
|
|
|
|
v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start;
|
|
|
|
v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
|
|
|
|
|
|
|
|
h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start;
|
|
|
|
v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start;
|
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
dtd->part1.clock = mode->clock / 10;
|
|
|
|
dtd->part1.h_active = width & 0xff;
|
|
|
|
dtd->part1.h_blank = h_blank_len & 0xff;
|
|
|
|
dtd->part1.h_high = (((width >> 8) & 0xf) << 4) |
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
((h_blank_len >> 8) & 0xf);
|
2009-02-03 07:11:52 +08:00
|
|
|
dtd->part1.v_active = height & 0xff;
|
|
|
|
dtd->part1.v_blank = v_blank_len & 0xff;
|
|
|
|
dtd->part1.v_high = (((height >> 8) & 0xf) << 4) |
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
((v_blank_len >> 8) & 0xf);
|
|
|
|
|
2009-03-24 14:02:41 +08:00
|
|
|
dtd->part2.h_sync_off = h_sync_offset & 0xff;
|
2009-02-03 07:11:52 +08:00
|
|
|
dtd->part2.h_sync_width = h_sync_len & 0xff;
|
|
|
|
dtd->part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 |
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
(v_sync_len & 0xf);
|
2009-02-03 07:11:52 +08:00
|
|
|
dtd->part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) |
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) |
|
|
|
|
((v_sync_len & 0x30) >> 4);
|
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
dtd->part2.dtd_flags = 0x18;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
if (mode->flags & DRM_MODE_FLAG_PHSYNC)
|
2009-02-03 07:11:52 +08:00
|
|
|
dtd->part2.dtd_flags |= 0x2;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
|
2009-02-03 07:11:52 +08:00
|
|
|
dtd->part2.dtd_flags |= 0x4;
|
|
|
|
|
|
|
|
dtd->part2.sdvo_flags = 0;
|
|
|
|
dtd->part2.v_sync_off_high = v_sync_offset & 0xc0;
|
|
|
|
dtd->part2.reserved = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void intel_sdvo_get_mode_from_dtd(struct drm_display_mode * mode,
|
2010-08-04 20:50:25 +08:00
|
|
|
const struct intel_sdvo_dtd *dtd)
|
2009-02-03 07:11:52 +08:00
|
|
|
{
|
|
|
|
mode->hdisplay = dtd->part1.h_active;
|
|
|
|
mode->hdisplay += ((dtd->part1.h_high >> 4) & 0x0f) << 8;
|
|
|
|
mode->hsync_start = mode->hdisplay + dtd->part2.h_sync_off;
|
2009-03-24 14:02:41 +08:00
|
|
|
mode->hsync_start += (dtd->part2.sync_off_width_high & 0xc0) << 2;
|
2009-02-03 07:11:52 +08:00
|
|
|
mode->hsync_end = mode->hsync_start + dtd->part2.h_sync_width;
|
|
|
|
mode->hsync_end += (dtd->part2.sync_off_width_high & 0x30) << 4;
|
|
|
|
mode->htotal = mode->hdisplay + dtd->part1.h_blank;
|
|
|
|
mode->htotal += (dtd->part1.h_high & 0xf) << 8;
|
|
|
|
|
|
|
|
mode->vdisplay = dtd->part1.v_active;
|
|
|
|
mode->vdisplay += ((dtd->part1.v_high >> 4) & 0x0f) << 8;
|
|
|
|
mode->vsync_start = mode->vdisplay;
|
|
|
|
mode->vsync_start += (dtd->part2.v_sync_off_width >> 4) & 0xf;
|
2009-03-24 14:02:41 +08:00
|
|
|
mode->vsync_start += (dtd->part2.sync_off_width_high & 0x0c) << 2;
|
2009-02-03 07:11:52 +08:00
|
|
|
mode->vsync_start += dtd->part2.v_sync_off_high & 0xc0;
|
|
|
|
mode->vsync_end = mode->vsync_start +
|
|
|
|
(dtd->part2.v_sync_off_width & 0xf);
|
|
|
|
mode->vsync_end += (dtd->part2.sync_off_width_high & 0x3) << 4;
|
|
|
|
mode->vtotal = mode->vdisplay + dtd->part1.v_blank;
|
|
|
|
mode->vtotal += (dtd->part1.v_high & 0xf) << 8;
|
|
|
|
|
|
|
|
mode->clock = dtd->part1.clock * 10;
|
|
|
|
|
2009-03-24 14:02:41 +08:00
|
|
|
mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
|
2009-02-03 07:11:52 +08:00
|
|
|
if (dtd->part2.dtd_flags & 0x2)
|
|
|
|
mode->flags |= DRM_MODE_FLAG_PHSYNC;
|
|
|
|
if (dtd->part2.dtd_flags & 0x4)
|
|
|
|
mode->flags |= DRM_MODE_FLAG_PVSYNC;
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_get_supp_encode(struct intel_sdvo *intel_sdvo,
|
2009-02-03 07:11:52 +08:00
|
|
|
struct intel_sdvo_encode *encode)
|
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
if (intel_sdvo_get_value(intel_sdvo,
|
|
|
|
SDVO_CMD_GET_SUPP_ENCODE,
|
|
|
|
encode, sizeof(*encode)))
|
|
|
|
return true;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
/* non-support means DVI */
|
|
|
|
memset(encode, 0, sizeof(*encode));
|
|
|
|
return false;
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_set_encode(struct intel_sdvo *intel_sdvo,
|
2010-03-26 02:48:48 +08:00
|
|
|
uint8_t mode)
|
2009-02-03 07:11:52 +08:00
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_ENCODE, &mode, 1);
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_set_colorimetry(struct intel_sdvo *intel_sdvo,
|
2009-02-03 07:11:52 +08:00
|
|
|
uint8_t mode)
|
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_COLORIMETRY, &mode, 1);
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
#if 0
|
2010-08-04 20:50:23 +08:00
|
|
|
static void intel_sdvo_dump_hdmi_buf(struct intel_sdvo *intel_sdvo)
|
2009-02-03 07:11:52 +08:00
|
|
|
{
|
|
|
|
int i, j;
|
|
|
|
uint8_t set_buf_index[2];
|
|
|
|
uint8_t av_split;
|
|
|
|
uint8_t buf_size;
|
|
|
|
uint8_t buf[48];
|
|
|
|
uint8_t *pos;
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
intel_sdvo_get_value(encoder, SDVO_CMD_GET_HBUF_AV_SPLIT, &av_split, 1);
|
2009-02-03 07:11:52 +08:00
|
|
|
|
|
|
|
for (i = 0; i <= av_split; i++) {
|
|
|
|
set_buf_index[0] = i; set_buf_index[1] = 0;
|
2010-03-26 02:48:48 +08:00
|
|
|
intel_sdvo_write_cmd(encoder, SDVO_CMD_SET_HBUF_INDEX,
|
2009-02-03 07:11:52 +08:00
|
|
|
set_buf_index, 2);
|
2010-03-26 02:48:48 +08:00
|
|
|
intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_INFO, NULL, 0);
|
|
|
|
intel_sdvo_read_response(encoder, &buf_size, 1);
|
2009-02-03 07:11:52 +08:00
|
|
|
|
|
|
|
pos = buf;
|
|
|
|
for (j = 0; j <= buf_size; j += 8) {
|
2010-03-26 02:48:48 +08:00
|
|
|
intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_DATA,
|
2009-02-03 07:11:52 +08:00
|
|
|
NULL, 0);
|
2010-03-26 02:48:48 +08:00
|
|
|
intel_sdvo_read_response(encoder, pos, 8);
|
2009-02-03 07:11:52 +08:00
|
|
|
pos += 8;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool intel_sdvo_set_hdmi_buf(struct intel_sdvo *intel_sdvo,
|
2010-03-26 02:48:48 +08:00
|
|
|
int index,
|
|
|
|
uint8_t *data, int8_t size, uint8_t tx_rate)
|
2009-02-03 07:11:52 +08:00
|
|
|
{
|
|
|
|
uint8_t set_buf_index[2];
|
|
|
|
|
|
|
|
set_buf_index[0] = index;
|
|
|
|
set_buf_index[1] = 0;
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_INDEX,
|
|
|
|
set_buf_index, 2))
|
|
|
|
return false;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
|
|
|
for (; size > 0; size -= 8) {
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_DATA, data, 8))
|
|
|
|
return false;
|
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
data += 8;
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_TXRATE, &tx_rate, 1);
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static uint8_t intel_sdvo_calc_hbuf_csum(uint8_t *data, uint8_t size)
|
|
|
|
{
|
|
|
|
uint8_t csum = 0;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < size; i++)
|
|
|
|
csum += data[i];
|
|
|
|
|
|
|
|
return 0x100 - csum;
|
|
|
|
}
|
|
|
|
|
|
|
|
#define DIP_TYPE_AVI 0x82
|
|
|
|
#define DIP_VERSION_AVI 0x2
|
|
|
|
#define DIP_LEN_AVI 13
|
|
|
|
|
|
|
|
struct dip_infoframe {
|
|
|
|
uint8_t type;
|
|
|
|
uint8_t version;
|
|
|
|
uint8_t len;
|
|
|
|
uint8_t checksum;
|
|
|
|
union {
|
|
|
|
struct {
|
|
|
|
/* Packet Byte #1 */
|
|
|
|
uint8_t S:2;
|
|
|
|
uint8_t B:2;
|
|
|
|
uint8_t A:1;
|
|
|
|
uint8_t Y:2;
|
|
|
|
uint8_t rsvd1:1;
|
|
|
|
/* Packet Byte #2 */
|
|
|
|
uint8_t R:4;
|
|
|
|
uint8_t M:2;
|
|
|
|
uint8_t C:2;
|
|
|
|
/* Packet Byte #3 */
|
|
|
|
uint8_t SC:2;
|
|
|
|
uint8_t Q:2;
|
|
|
|
uint8_t EC:3;
|
|
|
|
uint8_t ITC:1;
|
|
|
|
/* Packet Byte #4 */
|
|
|
|
uint8_t VIC:7;
|
|
|
|
uint8_t rsvd2:1;
|
|
|
|
/* Packet Byte #5 */
|
|
|
|
uint8_t PR:4;
|
|
|
|
uint8_t rsvd3:4;
|
|
|
|
/* Packet Byte #6~13 */
|
|
|
|
uint16_t top_bar_end;
|
|
|
|
uint16_t bottom_bar_start;
|
|
|
|
uint16_t left_bar_end;
|
|
|
|
uint16_t right_bar_start;
|
|
|
|
} avi;
|
|
|
|
struct {
|
|
|
|
/* Packet Byte #1 */
|
|
|
|
uint8_t channel_count:3;
|
|
|
|
uint8_t rsvd1:1;
|
|
|
|
uint8_t coding_type:4;
|
|
|
|
/* Packet Byte #2 */
|
|
|
|
uint8_t sample_size:2; /* SS0, SS1 */
|
|
|
|
uint8_t sample_frequency:3;
|
|
|
|
uint8_t rsvd2:3;
|
|
|
|
/* Packet Byte #3 */
|
|
|
|
uint8_t coding_type_private:5;
|
|
|
|
uint8_t rsvd3:3;
|
|
|
|
/* Packet Byte #4 */
|
|
|
|
uint8_t channel_allocation;
|
|
|
|
/* Packet Byte #5 */
|
|
|
|
uint8_t rsvd4:3;
|
|
|
|
uint8_t level_shift:4;
|
|
|
|
uint8_t downmix_inhibit:1;
|
|
|
|
} audio;
|
|
|
|
uint8_t payload[28];
|
|
|
|
} __attribute__ ((packed)) u;
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo,
|
2009-02-03 07:11:52 +08:00
|
|
|
struct drm_display_mode * mode)
|
|
|
|
{
|
|
|
|
struct dip_infoframe avi_if = {
|
|
|
|
.type = DIP_TYPE_AVI,
|
|
|
|
.version = DIP_VERSION_AVI,
|
|
|
|
.len = DIP_LEN_AVI,
|
|
|
|
};
|
|
|
|
|
|
|
|
avi_if.checksum = intel_sdvo_calc_hbuf_csum((uint8_t *)&avi_if,
|
|
|
|
4 + avi_if.len);
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_set_hdmi_buf(intel_sdvo, 1, (uint8_t *)&avi_if,
|
|
|
|
4 + avi_if.len,
|
|
|
|
SDVO_HBUF_TX_VSYNC);
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo)
|
2009-03-24 14:02:43 +08:00
|
|
|
{
|
2009-08-24 13:50:26 +08:00
|
|
|
struct intel_sdvo_tv_format format;
|
2010-08-04 20:50:26 +08:00
|
|
|
uint32_t format_map;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:26 +08:00
|
|
|
format_map = 1 << intel_sdvo->tv_format_index;
|
2009-08-24 13:50:26 +08:00
|
|
|
memset(&format, 0, sizeof(format));
|
2010-08-04 20:50:25 +08:00
|
|
|
memcpy(&format, &format_map, min(sizeof(format), sizeof(format_map)));
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
BUILD_BUG_ON(sizeof(format) != 6);
|
|
|
|
return intel_sdvo_set_value(intel_sdvo,
|
|
|
|
SDVO_CMD_SET_TV_FORMAT,
|
|
|
|
&format, sizeof(format));
|
2009-03-24 14:02:43 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool
|
|
|
|
intel_sdvo_set_output_timings_from_mode(struct intel_sdvo *intel_sdvo,
|
|
|
|
struct drm_display_mode *mode)
|
2009-02-03 07:11:52 +08:00
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
struct intel_sdvo_dtd output_dtd;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_set_target_output(intel_sdvo,
|
|
|
|
intel_sdvo->attached_output))
|
|
|
|
return false;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
intel_sdvo_get_dtd_from_mode(&output_dtd, mode);
|
|
|
|
if (!intel_sdvo_set_output_timing(intel_sdvo, &output_dtd))
|
|
|
|
return false;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool
|
|
|
|
intel_sdvo_set_input_timings_for_mode(struct intel_sdvo *intel_sdvo,
|
|
|
|
struct drm_display_mode *mode,
|
|
|
|
struct drm_display_mode *adjusted_mode)
|
|
|
|
{
|
|
|
|
/* Reset the input timing to the screen. Assume always input 0. */
|
|
|
|
if (!intel_sdvo_set_target_input(intel_sdvo))
|
|
|
|
return false;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_create_preferred_input_timing(intel_sdvo,
|
|
|
|
mode->clock / 10,
|
|
|
|
mode->hdisplay,
|
|
|
|
mode->vdisplay))
|
|
|
|
return false;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_get_preferred_input_timing(intel_sdvo,
|
2010-08-25 17:05:17 +08:00
|
|
|
&intel_sdvo->input_dtd))
|
2010-08-04 20:50:25 +08:00
|
|
|
return false;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-08-25 17:05:17 +08:00
|
|
|
intel_sdvo_get_mode_from_dtd(adjusted_mode, &intel_sdvo->input_dtd);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
drm_mode_set_crtcinfo(adjusted_mode, 0);
|
|
|
|
return true;
|
|
|
|
}
|
2009-06-30 11:35:35 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
|
|
|
|
struct drm_display_mode *mode,
|
|
|
|
struct drm_display_mode *adjusted_mode)
|
|
|
|
{
|
2010-09-14 23:46:59 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
|
2010-08-25 17:05:17 +08:00
|
|
|
int multiplier;
|
2009-06-30 11:35:35 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
/* We need to construct preferred input timings based on our
|
|
|
|
* output timings. To do that, we have to set the output
|
|
|
|
* timings, even though this isn't really the right place in
|
|
|
|
* the sequence to do it. Oh well.
|
|
|
|
*/
|
|
|
|
if (intel_sdvo->is_tv) {
|
|
|
|
if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo, mode))
|
|
|
|
return false;
|
2009-06-30 11:35:35 +08:00
|
|
|
|
2010-09-03 02:46:34 +08:00
|
|
|
(void) intel_sdvo_set_input_timings_for_mode(intel_sdvo,
|
|
|
|
mode,
|
|
|
|
adjusted_mode);
|
2010-08-04 20:50:23 +08:00
|
|
|
} else if (intel_sdvo->is_lvds) {
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo,
|
2010-08-25 17:05:17 +08:00
|
|
|
intel_sdvo->sdvo_lvds_fixed_mode))
|
2009-02-03 07:11:52 +08:00
|
|
|
return false;
|
2009-06-30 11:35:35 +08:00
|
|
|
|
2010-09-03 02:46:34 +08:00
|
|
|
(void) intel_sdvo_set_input_timings_for_mode(intel_sdvo,
|
|
|
|
mode,
|
|
|
|
adjusted_mode);
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
2010-08-04 20:50:25 +08:00
|
|
|
|
|
|
|
/* Make the CRTC code factor in the SDVO pixel multiplier. The
|
2010-08-25 17:05:17 +08:00
|
|
|
* SDVO device will factor out the multiplier during mode_set.
|
2010-08-04 20:50:25 +08:00
|
|
|
*/
|
2010-08-25 17:05:17 +08:00
|
|
|
multiplier = intel_sdvo_get_pixel_multiplier(adjusted_mode);
|
|
|
|
intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void intel_sdvo_mode_set(struct drm_encoder *encoder,
|
|
|
|
struct drm_display_mode *mode,
|
|
|
|
struct drm_display_mode *adjusted_mode)
|
|
|
|
{
|
|
|
|
struct drm_device *dev = encoder->dev;
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
struct drm_crtc *crtc = encoder->crtc;
|
|
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
2010-09-14 23:46:59 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
|
2010-08-25 17:05:17 +08:00
|
|
|
u32 sdvox;
|
2009-02-03 07:11:52 +08:00
|
|
|
struct intel_sdvo_in_out_map in_out;
|
|
|
|
struct intel_sdvo_dtd input_dtd;
|
2010-08-25 17:05:17 +08:00
|
|
|
int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
|
|
|
|
int rate;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
|
|
|
if (!mode)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* First, set the input mapping for the first input to our controlled
|
|
|
|
* output. This is only correct if we're a single-input device, in
|
|
|
|
* which case the first input is the output from the appropriate SDVO
|
|
|
|
* channel on the motherboard. In a two-input device, the first input
|
|
|
|
* will be SDVOB and the second SDVOC.
|
|
|
|
*/
|
2010-08-04 20:50:23 +08:00
|
|
|
in_out.in0 = intel_sdvo->attached_output;
|
2009-02-03 07:11:52 +08:00
|
|
|
in_out.in1 = 0;
|
|
|
|
|
2010-09-03 02:46:34 +08:00
|
|
|
intel_sdvo_set_value(intel_sdvo,
|
|
|
|
SDVO_CMD_SET_IN_OUT_MAP,
|
|
|
|
&in_out, sizeof(in_out));
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-08-25 17:05:17 +08:00
|
|
|
/* Set the output timings to the screen */
|
|
|
|
if (!intel_sdvo_set_target_output(intel_sdvo,
|
|
|
|
intel_sdvo->attached_output))
|
|
|
|
return;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2009-03-24 14:02:43 +08:00
|
|
|
/* We have tried to get input timing in mode_fixup, and filled into
|
2010-08-25 17:05:17 +08:00
|
|
|
* adjusted_mode.
|
2009-02-03 07:11:52 +08:00
|
|
|
*/
|
2010-08-25 17:05:17 +08:00
|
|
|
if (intel_sdvo->is_tv || intel_sdvo->is_lvds) {
|
|
|
|
input_dtd = intel_sdvo->input_dtd;
|
|
|
|
} else {
|
2009-02-03 07:11:52 +08:00
|
|
|
/* Set the output timing to the screen */
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_set_target_output(intel_sdvo,
|
|
|
|
intel_sdvo->attached_output))
|
|
|
|
return;
|
|
|
|
|
2010-08-25 17:05:17 +08:00
|
|
|
intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
|
2010-09-03 02:46:34 +08:00
|
|
|
(void) intel_sdvo_set_output_timing(intel_sdvo, &input_dtd);
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
/* Set the input timing to the screen. Assume always input 0. */
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_set_target_input(intel_sdvo))
|
|
|
|
return;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-25 17:05:17 +08:00
|
|
|
if (intel_sdvo->is_hdmi &&
|
|
|
|
!intel_sdvo_set_avi_infoframe(intel_sdvo, mode))
|
|
|
|
return;
|
2009-03-24 14:02:43 +08:00
|
|
|
|
2010-08-25 17:05:17 +08:00
|
|
|
if (intel_sdvo->is_tv &&
|
|
|
|
!intel_sdvo_set_tv_format(intel_sdvo))
|
|
|
|
return;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-09-03 02:46:34 +08:00
|
|
|
(void) intel_sdvo_set_input_timing(intel_sdvo, &input_dtd);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-25 17:05:17 +08:00
|
|
|
switch (pixel_multiplier) {
|
|
|
|
default:
|
2010-08-04 20:50:25 +08:00
|
|
|
case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
|
|
|
|
case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
|
|
|
|
case 4: rate = SDVO_CLOCK_RATE_MULT_4X; break;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_set_clock_rate_mult(intel_sdvo, rate))
|
|
|
|
return;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
/* Set the SDVO control regs. */
|
2009-02-03 07:11:52 +08:00
|
|
|
if (IS_I965G(dev)) {
|
2010-08-25 17:05:17 +08:00
|
|
|
sdvox = SDVO_BORDER_ENABLE;
|
2010-07-17 02:46:32 +08:00
|
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
|
|
|
|
sdvox |= SDVO_VSYNC_ACTIVE_HIGH;
|
|
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
|
|
|
|
sdvox |= SDVO_HSYNC_ACTIVE_HIGH;
|
2009-02-03 07:11:52 +08:00
|
|
|
} else {
|
2010-08-25 17:05:17 +08:00
|
|
|
sdvox = I915_READ(intel_sdvo->sdvo_reg);
|
2010-08-04 20:50:23 +08:00
|
|
|
switch (intel_sdvo->sdvo_reg) {
|
2009-02-03 07:11:52 +08:00
|
|
|
case SDVOB:
|
|
|
|
sdvox &= SDVOB_PRESERVE_MASK;
|
|
|
|
break;
|
|
|
|
case SDVOC:
|
|
|
|
sdvox &= SDVOC_PRESERVE_MASK;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
sdvox |= (9 << 19) | SDVO_BORDER_ENABLE;
|
|
|
|
}
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
if (intel_crtc->pipe == 1)
|
|
|
|
sdvox |= SDVO_PIPE_B_SELECT;
|
2010-08-25 17:05:17 +08:00
|
|
|
if (intel_sdvo->is_hdmi)
|
|
|
|
sdvox |= SDVO_AUDIO_ENABLE;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
if (IS_I965G(dev)) {
|
2009-02-03 07:11:52 +08:00
|
|
|
/* done in crtc_mode_set as the dpll_md reg must be written early */
|
|
|
|
} else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
|
|
|
|
/* done in crtc_mode_set as it lives inside the dpll register */
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
} else {
|
2010-08-25 17:05:17 +08:00
|
|
|
sdvox |= (pixel_multiplier - 1) << SDVO_PORT_MULTIPLY_SHIFT;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-25 17:05:17 +08:00
|
|
|
if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL)
|
2009-06-30 11:35:35 +08:00
|
|
|
sdvox |= SDVO_STALL_SELECT;
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_write_sdvox(intel_sdvo, sdvox);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
|
|
|
|
{
|
|
|
|
struct drm_device *dev = encoder->dev;
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
2010-09-14 23:46:59 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
|
2010-08-19 04:20:54 +08:00
|
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
u32 temp;
|
|
|
|
|
|
|
|
if (mode != DRM_MODE_DPMS_ON) {
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_set_active_outputs(intel_sdvo, 0);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
if (0)
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
if (mode == DRM_MODE_DPMS_OFF) {
|
2010-08-04 20:50:23 +08:00
|
|
|
temp = I915_READ(intel_sdvo->sdvo_reg);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
if ((temp & SDVO_ENABLE) != 0) {
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
bool input1, input2;
|
|
|
|
int i;
|
|
|
|
u8 status;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
temp = I915_READ(intel_sdvo->sdvo_reg);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
if ((temp & SDVO_ENABLE) == 0)
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
for (i = 0; i < 2; i++)
|
2010-08-19 04:20:54 +08:00
|
|
|
intel_wait_for_vblank(dev, intel_crtc->pipe);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
/* Warn if the device reported failure to sync.
|
|
|
|
* A lot of SDVO devices fail to notify of sync, but it's
|
|
|
|
* a given it the status is a success, we succeeded.
|
|
|
|
*/
|
|
|
|
if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
|
2009-07-20 13:48:04 +08:00
|
|
|
DRM_DEBUG_KMS("First %s output reported failure to "
|
2010-08-04 20:50:23 +08:00
|
|
|
"sync\n", SDVO_NAME(intel_sdvo));
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
if (0)
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
|
|
|
|
intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int intel_sdvo_mode_valid(struct drm_connector *connector,
|
|
|
|
struct drm_display_mode *mode)
|
|
|
|
{
|
2010-09-09 23:20:55 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
|
|
|
|
return MODE_NO_DBLESCAN;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->pixel_clock_min > mode->clock)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
return MODE_CLOCK_LOW;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->pixel_clock_max < mode->clock)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
return MODE_CLOCK_HIGH;
|
|
|
|
|
2010-08-08 21:28:23 +08:00
|
|
|
if (intel_sdvo->is_lvds) {
|
2010-08-04 20:50:23 +08:00
|
|
|
if (mode->hdisplay > intel_sdvo->sdvo_lvds_fixed_mode->hdisplay)
|
2009-06-30 11:35:35 +08:00
|
|
|
return MODE_PANEL;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (mode->vdisplay > intel_sdvo->sdvo_lvds_fixed_mode->vdisplay)
|
2009-06-30 11:35:35 +08:00
|
|
|
return MODE_PANEL;
|
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
return MODE_OK;
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct intel_sdvo_caps *caps)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_DEVICE_CAPS, caps, sizeof(*caps));
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-03-29 21:22:55 +08:00
|
|
|
/* No use! */
|
|
|
|
#if 0
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB)
|
|
|
|
{
|
|
|
|
struct drm_connector *connector = NULL;
|
2010-08-04 20:50:23 +08:00
|
|
|
struct intel_sdvo *iout = NULL;
|
|
|
|
struct intel_sdvo *sdvo;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
/* find the sdvo connector */
|
|
|
|
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
|
2010-08-04 20:50:23 +08:00
|
|
|
iout = to_intel_sdvo(connector);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
if (iout->type != INTEL_OUTPUT_SDVO)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
sdvo = iout->dev_priv;
|
|
|
|
|
2010-03-26 02:48:48 +08:00
|
|
|
if (sdvo->sdvo_reg == SDVOB && sdvoB)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
return connector;
|
|
|
|
|
2010-03-26 02:48:48 +08:00
|
|
|
if (sdvo->sdvo_reg == SDVOC && !sdvoB)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
return connector;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
int intel_sdvo_supports_hotplug(struct drm_connector *connector)
|
|
|
|
{
|
|
|
|
u8 response[2];
|
|
|
|
u8 status;
|
2010-08-04 20:50:23 +08:00
|
|
|
struct intel_sdvo *intel_sdvo;
|
2009-07-20 13:48:04 +08:00
|
|
|
DRM_DEBUG_KMS("\n");
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
if (!connector)
|
|
|
|
return 0;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo = to_intel_sdvo(connector);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
|
|
|
|
&response, 2) && response[0];
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
|
|
|
|
{
|
|
|
|
u8 response[2];
|
|
|
|
u8 status;
|
2010-08-04 20:50:23 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = to_intel_sdvo(connector);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
|
|
|
|
intel_sdvo_read_response(intel_sdvo, &response, 2);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
if (on) {
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
|
|
|
|
status = intel_sdvo_read_response(intel_sdvo, &response, 2);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
} else {
|
|
|
|
response[0] = 0;
|
|
|
|
response[1] = 0;
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
|
|
|
|
intel_sdvo_read_response(intel_sdvo, &response, 2);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
2010-03-29 21:22:55 +08:00
|
|
|
#endif
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2009-07-23 17:11:34 +08:00
|
|
|
static bool
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo)
|
2009-07-23 17:11:34 +08:00
|
|
|
{
|
|
|
|
int caps = 0;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->caps.output_flags &
|
2009-07-23 17:11:34 +08:00
|
|
|
(SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
|
|
|
|
caps++;
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->caps.output_flags &
|
2009-07-23 17:11:34 +08:00
|
|
|
(SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1))
|
|
|
|
caps++;
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->caps.output_flags &
|
2009-08-09 19:50:53 +08:00
|
|
|
(SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID1))
|
2009-07-23 17:11:34 +08:00
|
|
|
caps++;
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->caps.output_flags &
|
2009-07-23 17:11:34 +08:00
|
|
|
(SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_CVBS1))
|
|
|
|
caps++;
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->caps.output_flags &
|
2009-07-23 17:11:34 +08:00
|
|
|
(SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_YPRPB1))
|
|
|
|
caps++;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->caps.output_flags &
|
2009-07-23 17:11:34 +08:00
|
|
|
(SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1))
|
|
|
|
caps++;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->caps.output_flags &
|
2009-07-23 17:11:34 +08:00
|
|
|
(SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1))
|
|
|
|
caps++;
|
|
|
|
|
|
|
|
return (caps > 1);
|
|
|
|
}
|
|
|
|
|
2009-09-04 13:07:54 +08:00
|
|
|
static struct drm_connector *
|
|
|
|
intel_find_analog_connector(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct drm_connector *connector;
|
2010-09-09 23:20:55 +08:00
|
|
|
struct intel_sdvo *encoder;
|
|
|
|
|
|
|
|
list_for_each_entry(encoder,
|
|
|
|
&dev->mode_config.encoder_list,
|
|
|
|
base.base.head) {
|
|
|
|
if (encoder->base.type == INTEL_OUTPUT_ANALOG) {
|
|
|
|
list_for_each_entry(connector,
|
|
|
|
&dev->mode_config.connector_list,
|
|
|
|
head) {
|
|
|
|
if (&encoder->base ==
|
|
|
|
intel_attached_encoder(connector))
|
2010-03-29 21:22:55 +08:00
|
|
|
return connector;
|
|
|
|
}
|
|
|
|
}
|
2009-09-04 13:07:54 +08:00
|
|
|
}
|
2010-09-09 23:20:55 +08:00
|
|
|
|
2009-09-04 13:07:54 +08:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
intel_analog_is_connected(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct drm_connector *analog_connector;
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
analog_connector = intel_find_analog_connector(dev);
|
2009-09-04 13:07:54 +08:00
|
|
|
if (!analog_connector)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (analog_connector->funcs->detect(analog_connector) ==
|
|
|
|
connector_status_disconnected)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2009-07-29 11:31:18 +08:00
|
|
|
enum drm_connector_status
|
2010-04-30 02:05:18 +08:00
|
|
|
intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
|
2009-04-02 13:13:26 +08:00
|
|
|
{
|
2010-09-09 23:20:55 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
|
2010-09-15 00:58:19 +08:00
|
|
|
enum drm_connector_status status;
|
|
|
|
struct edid *edid;
|
2009-04-02 13:13:26 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
edid = drm_get_edid(connector, intel_sdvo->base.ddc_bus);
|
2009-09-04 13:07:54 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (edid == NULL && intel_sdvo_multifunc_encoder(intel_sdvo)) {
|
2010-09-15 00:58:19 +08:00
|
|
|
u8 saved_ddc = intel_sdvo->ddc_bus, ddc;
|
|
|
|
|
2010-01-08 10:58:20 +08:00
|
|
|
/*
|
|
|
|
* Don't use the 1 as the argument of DDC bus switch to get
|
|
|
|
* the EDID. It is used for SDVO SPD ROM.
|
|
|
|
*/
|
2010-09-15 00:58:19 +08:00
|
|
|
for (ddc = intel_sdvo->ddc_bus >> 1; ddc > 1; ddc >>= 1) {
|
|
|
|
intel_sdvo->ddc_bus = ddc;
|
2010-08-04 20:50:23 +08:00
|
|
|
edid = drm_get_edid(connector, intel_sdvo->base.ddc_bus);
|
2010-09-15 00:58:19 +08:00
|
|
|
if (edid)
|
2010-01-08 10:58:20 +08:00
|
|
|
break;
|
|
|
|
}
|
2010-09-15 00:58:19 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If we found the EDID on the other bus, maybe that is the
|
|
|
|
* correct DDC bus.
|
|
|
|
*/
|
2010-01-08 10:58:20 +08:00
|
|
|
if (edid == NULL)
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->ddc_bus = saved_ddc;
|
2010-01-08 10:58:20 +08:00
|
|
|
}
|
2010-09-15 00:58:19 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* When there is no edid and no monitor is connected with VGA
|
|
|
|
* port, try to use the CRT ddc to read the EDID for DVI-connector.
|
2009-09-04 13:07:54 +08:00
|
|
|
*/
|
2010-09-15 00:58:19 +08:00
|
|
|
if (edid == NULL &&
|
|
|
|
intel_sdvo->analog_ddc_bus &&
|
2010-03-29 21:22:55 +08:00
|
|
|
!intel_analog_is_connected(connector->dev))
|
2010-08-04 20:50:23 +08:00
|
|
|
edid = drm_get_edid(connector, intel_sdvo->analog_ddc_bus);
|
2010-04-30 02:05:18 +08:00
|
|
|
|
2010-09-15 00:58:19 +08:00
|
|
|
status = connector_status_disconnected;
|
2009-04-02 13:13:26 +08:00
|
|
|
if (edid != NULL) {
|
2010-04-30 02:05:18 +08:00
|
|
|
/* DDC bus is shared, match EDID to connector type */
|
2010-09-15 00:58:19 +08:00
|
|
|
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
|
|
|
|
status = connector_status_connected;
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->is_hdmi = drm_detect_hdmi_monitor(edid);
|
2010-09-15 00:58:19 +08:00
|
|
|
}
|
2010-04-30 02:05:18 +08:00
|
|
|
connector->display_info.raw_edid = NULL;
|
2010-09-15 00:58:19 +08:00
|
|
|
kfree(edid);
|
|
|
|
}
|
2010-04-30 02:05:18 +08:00
|
|
|
|
2009-07-29 11:31:18 +08:00
|
|
|
return status;
|
2009-04-02 13:13:26 +08:00
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
|
|
|
|
{
|
2009-07-23 17:11:34 +08:00
|
|
|
uint16_t response;
|
2010-09-09 23:20:55 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
|
2010-08-04 20:50:24 +08:00
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
|
2010-03-30 14:06:33 +08:00
|
|
|
enum drm_connector_status ret;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_write_cmd(intel_sdvo,
|
|
|
|
SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0))
|
|
|
|
return connector_status_unknown;
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->is_tv) {
|
2009-11-06 15:39:56 +08:00
|
|
|
/* add 30ms delay when the output type is SDVO-TV */
|
|
|
|
mdelay(30);
|
|
|
|
}
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_read_response(intel_sdvo, &response, 2))
|
|
|
|
return connector_status_unknown;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2009-08-20 11:38:04 +08:00
|
|
|
DRM_DEBUG_KMS("SDVO response %d %d\n", response & 0xff, response >> 8);
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2009-07-23 17:11:34 +08:00
|
|
|
if (response == 0)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
return connector_status_disconnected;
|
2009-07-23 17:11:34 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->attached_output = response;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
if ((intel_sdvo_connector->output_flag & response) == 0)
|
2010-03-30 14:06:33 +08:00
|
|
|
ret = connector_status_disconnected;
|
2010-04-30 02:05:18 +08:00
|
|
|
else if (response & SDVO_TMDS_MASK)
|
|
|
|
ret = intel_sdvo_hdmi_sink_detect(connector);
|
2010-03-30 14:06:33 +08:00
|
|
|
else
|
|
|
|
ret = connector_status_connected;
|
|
|
|
|
|
|
|
/* May update encoder flag for like clock for SDVO TV, etc.*/
|
|
|
|
if (ret == connector_status_connected) {
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->is_tv = false;
|
|
|
|
intel_sdvo->is_lvds = false;
|
|
|
|
intel_sdvo->base.needs_tv_clock = false;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
|
|
|
if (response & SDVO_TV_MASK) {
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->is_tv = true;
|
|
|
|
intel_sdvo->base.needs_tv_clock = true;
|
2010-03-30 14:06:33 +08:00
|
|
|
}
|
|
|
|
if (response & SDVO_LVDS_MASK)
|
2010-08-08 21:28:23 +08:00
|
|
|
intel_sdvo->is_lvds = intel_sdvo->sdvo_lvds_fixed_mode != NULL;
|
2009-07-23 17:11:34 +08:00
|
|
|
}
|
2010-03-30 14:06:33 +08:00
|
|
|
|
|
|
|
return ret;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-09-09 23:20:55 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
|
2009-09-04 13:07:54 +08:00
|
|
|
int num_modes;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
/* set the bus switch and get the modes */
|
2010-08-04 20:50:23 +08:00
|
|
|
num_modes = intel_ddc_get_modes(connector, intel_sdvo->base.ddc_bus);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2009-09-04 13:07:54 +08:00
|
|
|
/*
|
|
|
|
* Mac mini hack. On this device, the DVI-I connector shares one DDC
|
|
|
|
* link between analog and digital outputs. So, if the regular SDVO
|
|
|
|
* DDC fails, check to see if the analog output is disconnected, in
|
|
|
|
* which case we'll look there for the digital DDC data.
|
2009-02-03 07:11:52 +08:00
|
|
|
*/
|
2009-09-04 13:07:54 +08:00
|
|
|
if (num_modes == 0 &&
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->analog_ddc_bus &&
|
2010-03-29 21:22:55 +08:00
|
|
|
!intel_analog_is_connected(connector->dev)) {
|
2009-09-04 13:07:54 +08:00
|
|
|
/* Switch to the analog ddc bus and try that
|
|
|
|
*/
|
2010-08-04 20:50:23 +08:00
|
|
|
(void) intel_ddc_get_modes(connector, intel_sdvo->analog_ddc_bus);
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set of SDVO TV modes.
|
|
|
|
* Note! This is in reply order (see loop in get_tv_modes).
|
|
|
|
* XXX: all 60Hz refresh?
|
|
|
|
*/
|
|
|
|
struct drm_display_mode sdvo_tv_modes[] = {
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("320x200", DRM_MODE_TYPE_DRIVER, 5815, 320, 321, 384,
|
|
|
|
416, 0, 200, 201, 232, 233, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("320x240", DRM_MODE_TYPE_DRIVER, 6814, 320, 321, 384,
|
|
|
|
416, 0, 240, 241, 272, 273, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("400x300", DRM_MODE_TYPE_DRIVER, 9910, 400, 401, 464,
|
|
|
|
496, 0, 300, 301, 332, 333, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 16913, 640, 641, 704,
|
|
|
|
736, 0, 350, 351, 382, 383, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121, 640, 641, 704,
|
|
|
|
736, 0, 400, 401, 432, 433, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 22654, 640, 641, 704,
|
|
|
|
736, 0, 480, 481, 512, 513, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("704x480", DRM_MODE_TYPE_DRIVER, 24624, 704, 705, 768,
|
|
|
|
800, 0, 480, 481, 512, 513, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("704x576", DRM_MODE_TYPE_DRIVER, 29232, 704, 705, 768,
|
|
|
|
800, 0, 576, 577, 608, 609, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("720x350", DRM_MODE_TYPE_DRIVER, 18751, 720, 721, 784,
|
|
|
|
816, 0, 350, 351, 382, 383, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 21199, 720, 721, 784,
|
|
|
|
816, 0, 400, 401, 432, 433, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 25116, 720, 721, 784,
|
|
|
|
816, 0, 480, 481, 512, 513, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("720x540", DRM_MODE_TYPE_DRIVER, 28054, 720, 721, 784,
|
|
|
|
816, 0, 540, 541, 572, 573, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 29816, 720, 721, 784,
|
|
|
|
816, 0, 576, 577, 608, 609, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("768x576", DRM_MODE_TYPE_DRIVER, 31570, 768, 769, 832,
|
|
|
|
864, 0, 576, 577, 608, 609, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 34030, 800, 801, 864,
|
|
|
|
896, 0, 600, 601, 632, 633, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 36581, 832, 833, 896,
|
|
|
|
928, 0, 624, 625, 656, 657, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("920x766", DRM_MODE_TYPE_DRIVER, 48707, 920, 921, 984,
|
|
|
|
1016, 0, 766, 767, 798, 799, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 53827, 1024, 1025, 1088,
|
|
|
|
1120, 0, 768, 769, 800, 801, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
2009-03-24 14:02:43 +08:00
|
|
|
{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 87265, 1280, 1281, 1344,
|
|
|
|
1376, 0, 1024, 1025, 1056, 1057, 0,
|
2009-02-03 07:11:52 +08:00
|
|
|
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
|
|
|
|
};
|
|
|
|
|
|
|
|
static void intel_sdvo_get_tv_modes(struct drm_connector *connector)
|
|
|
|
{
|
2010-09-09 23:20:55 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
|
2009-03-24 14:02:43 +08:00
|
|
|
struct intel_sdvo_sdtv_resolution_request tv_res;
|
2009-08-24 13:50:26 +08:00
|
|
|
uint32_t reply = 0, format_map = 0;
|
|
|
|
int i;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
|
|
|
/* Read the list of supported input resolutions for the selected TV
|
|
|
|
* format.
|
|
|
|
*/
|
2010-08-04 20:50:26 +08:00
|
|
|
format_map = 1 << intel_sdvo->tv_format_index;
|
2009-08-24 13:50:26 +08:00
|
|
|
memcpy(&tv_res, &format_map,
|
2010-08-04 20:50:25 +08:00
|
|
|
min(sizeof(format_map), sizeof(struct intel_sdvo_sdtv_resolution_request)));
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_set_target_output(intel_sdvo, intel_sdvo->attached_output))
|
|
|
|
return;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
BUILD_BUG_ON(sizeof(tv_res) != 3);
|
|
|
|
if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT,
|
|
|
|
&tv_res, sizeof(tv_res)))
|
|
|
|
return;
|
|
|
|
if (!intel_sdvo_read_response(intel_sdvo, &reply, 3))
|
2009-02-03 07:11:52 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sdvo_tv_modes); i++)
|
2009-03-24 14:02:43 +08:00
|
|
|
if (reply & (1 << i)) {
|
|
|
|
struct drm_display_mode *nmode;
|
|
|
|
nmode = drm_mode_duplicate(connector->dev,
|
2010-08-04 20:50:25 +08:00
|
|
|
&sdvo_tv_modes[i]);
|
2009-03-24 14:02:43 +08:00
|
|
|
if (nmode)
|
|
|
|
drm_mode_probed_add(connector, nmode);
|
|
|
|
}
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
|
|
|
|
2009-05-13 11:20:06 +08:00
|
|
|
static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
|
|
|
|
{
|
2010-09-09 23:20:55 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
|
2009-05-13 11:20:06 +08:00
|
|
|
struct drm_i915_private *dev_priv = connector->dev->dev_private;
|
2009-06-30 11:35:35 +08:00
|
|
|
struct drm_display_mode *newmode;
|
2009-05-13 11:20:06 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Attempt to get the mode list from DDC.
|
|
|
|
* Assume that the preferred modes are
|
|
|
|
* arranged in priority order.
|
|
|
|
*/
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_ddc_get_modes(connector, intel_sdvo->base.ddc_bus);
|
2009-05-13 11:20:06 +08:00
|
|
|
if (list_empty(&connector->probed_modes) == false)
|
2009-06-30 11:35:35 +08:00
|
|
|
goto end;
|
2009-05-13 11:20:06 +08:00
|
|
|
|
|
|
|
/* Fetch modes from VBT */
|
|
|
|
if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
|
|
|
|
newmode = drm_mode_duplicate(connector->dev,
|
|
|
|
dev_priv->sdvo_lvds_vbt_mode);
|
|
|
|
if (newmode != NULL) {
|
|
|
|
/* Guarantee the mode is preferred */
|
|
|
|
newmode->type = (DRM_MODE_TYPE_PREFERRED |
|
|
|
|
DRM_MODE_TYPE_DRIVER);
|
|
|
|
drm_mode_probed_add(connector, newmode);
|
|
|
|
}
|
|
|
|
}
|
2009-06-30 11:35:35 +08:00
|
|
|
|
|
|
|
end:
|
|
|
|
list_for_each_entry(newmode, &connector->probed_modes, head) {
|
|
|
|
if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->sdvo_lvds_fixed_mode =
|
2009-06-30 11:35:35 +08:00
|
|
|
drm_mode_duplicate(connector->dev, newmode);
|
2010-08-25 17:05:17 +08:00
|
|
|
|
|
|
|
drm_mode_set_crtcinfo(intel_sdvo->sdvo_lvds_fixed_mode,
|
|
|
|
0);
|
|
|
|
|
2010-08-08 21:28:23 +08:00
|
|
|
intel_sdvo->is_lvds = true;
|
2009-06-30 11:35:35 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-05-13 11:20:06 +08:00
|
|
|
}
|
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
static int intel_sdvo_get_modes(struct drm_connector *connector)
|
|
|
|
{
|
2010-08-04 20:50:24 +08:00
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
if (IS_TV(intel_sdvo_connector))
|
2009-02-03 07:11:52 +08:00
|
|
|
intel_sdvo_get_tv_modes(connector);
|
2010-08-04 20:50:24 +08:00
|
|
|
else if (IS_LVDS(intel_sdvo_connector))
|
2009-05-13 11:20:06 +08:00
|
|
|
intel_sdvo_get_lvds_modes(connector);
|
2009-02-03 07:11:52 +08:00
|
|
|
else
|
|
|
|
intel_sdvo_get_ddc_modes(connector);
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return !list_empty(&connector->probed_modes);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:27 +08:00
|
|
|
static void
|
|
|
|
intel_sdvo_destroy_enhance_property(struct drm_connector *connector)
|
2009-09-10 15:45:46 +08:00
|
|
|
{
|
2010-08-04 20:50:24 +08:00
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
|
2009-09-10 15:45:46 +08:00
|
|
|
struct drm_device *dev = connector->dev;
|
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
if (intel_sdvo_connector->left)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->left);
|
|
|
|
if (intel_sdvo_connector->right)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->right);
|
|
|
|
if (intel_sdvo_connector->top)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->top);
|
|
|
|
if (intel_sdvo_connector->bottom)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->bottom);
|
|
|
|
if (intel_sdvo_connector->hpos)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->hpos);
|
|
|
|
if (intel_sdvo_connector->vpos)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->vpos);
|
|
|
|
if (intel_sdvo_connector->saturation)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->saturation);
|
|
|
|
if (intel_sdvo_connector->contrast)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->contrast);
|
|
|
|
if (intel_sdvo_connector->hue)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->hue);
|
|
|
|
if (intel_sdvo_connector->sharpness)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->sharpness);
|
|
|
|
if (intel_sdvo_connector->flicker_filter)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->flicker_filter);
|
|
|
|
if (intel_sdvo_connector->flicker_filter_2d)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->flicker_filter_2d);
|
|
|
|
if (intel_sdvo_connector->flicker_filter_adaptive)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->flicker_filter_adaptive);
|
|
|
|
if (intel_sdvo_connector->tv_luma_filter)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->tv_luma_filter);
|
|
|
|
if (intel_sdvo_connector->tv_chroma_filter)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->tv_chroma_filter);
|
2010-08-04 20:50:29 +08:00
|
|
|
if (intel_sdvo_connector->dot_crawl)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->dot_crawl);
|
2010-08-04 20:50:28 +08:00
|
|
|
if (intel_sdvo_connector->brightness)
|
|
|
|
drm_property_destroy(dev, intel_sdvo_connector->brightness);
|
2009-09-10 15:45:46 +08:00
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
static void intel_sdvo_destroy(struct drm_connector *connector)
|
|
|
|
{
|
2010-08-04 20:50:24 +08:00
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
if (intel_sdvo_connector->tv_format)
|
2009-08-24 13:50:26 +08:00
|
|
|
drm_property_destroy(connector->dev,
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->tv_format);
|
2009-09-10 15:45:46 +08:00
|
|
|
|
2010-03-29 21:22:55 +08:00
|
|
|
intel_sdvo_destroy_enhance_property(connector);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
drm_sysfs_connector_remove(connector);
|
|
|
|
drm_connector_cleanup(connector);
|
2010-03-29 21:22:55 +08:00
|
|
|
kfree(connector);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2009-08-24 13:50:26 +08:00
|
|
|
static int
|
|
|
|
intel_sdvo_set_property(struct drm_connector *connector,
|
|
|
|
struct drm_property *property,
|
|
|
|
uint64_t val)
|
|
|
|
{
|
2010-09-09 23:20:55 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
|
2010-08-04 20:50:24 +08:00
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
|
2009-09-10 15:45:46 +08:00
|
|
|
uint16_t temp_value;
|
2010-08-04 20:50:25 +08:00
|
|
|
uint8_t cmd;
|
|
|
|
int ret;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
|
|
|
ret = drm_connector_property_set_value(connector, property, val);
|
2010-08-04 20:50:25 +08:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
#define CHECK_PROPERTY(name, NAME) \
|
|
|
|
if (intel_sdvo_connector->name == property) { \
|
|
|
|
if (intel_sdvo_connector->cur_##name == temp_value) return 0; \
|
|
|
|
if (intel_sdvo_connector->max_##name < temp_value) return -EINVAL; \
|
|
|
|
cmd = SDVO_CMD_SET_##NAME; \
|
|
|
|
intel_sdvo_connector->cur_##name = temp_value; \
|
|
|
|
goto set_value; \
|
|
|
|
}
|
|
|
|
|
|
|
|
if (property == intel_sdvo_connector->tv_format) {
|
2010-08-04 20:50:25 +08:00
|
|
|
if (val >= TV_FORMAT_NUM)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2010-08-04 20:50:26 +08:00
|
|
|
if (intel_sdvo->tv_format_index ==
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector->tv_format_supported[val])
|
2010-08-04 20:50:25 +08:00
|
|
|
return 0;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:26 +08:00
|
|
|
intel_sdvo->tv_format_index = intel_sdvo_connector->tv_format_supported[val];
|
2010-08-04 20:50:28 +08:00
|
|
|
goto done;
|
2010-08-04 20:50:25 +08:00
|
|
|
} else if (IS_TV_OR_LVDS(intel_sdvo_connector)) {
|
2009-09-10 15:45:46 +08:00
|
|
|
temp_value = val;
|
2010-08-04 20:50:28 +08:00
|
|
|
if (intel_sdvo_connector->left == property) {
|
2009-09-10 15:45:46 +08:00
|
|
|
drm_connector_property_set_value(connector,
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->right, val);
|
2010-08-04 20:50:24 +08:00
|
|
|
if (intel_sdvo_connector->left_margin == temp_value)
|
2010-08-04 20:50:25 +08:00
|
|
|
return 0;
|
2009-09-10 15:45:46 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector->left_margin = temp_value;
|
|
|
|
intel_sdvo_connector->right_margin = temp_value;
|
|
|
|
temp_value = intel_sdvo_connector->max_hscan -
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->left_margin;
|
2009-09-10 15:45:46 +08:00
|
|
|
cmd = SDVO_CMD_SET_OVERSCAN_H;
|
2010-08-04 20:50:28 +08:00
|
|
|
goto set_value;
|
|
|
|
} else if (intel_sdvo_connector->right == property) {
|
2009-09-10 15:45:46 +08:00
|
|
|
drm_connector_property_set_value(connector,
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->left, val);
|
2010-08-04 20:50:24 +08:00
|
|
|
if (intel_sdvo_connector->right_margin == temp_value)
|
2010-08-04 20:50:25 +08:00
|
|
|
return 0;
|
2009-09-10 15:45:46 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector->left_margin = temp_value;
|
|
|
|
intel_sdvo_connector->right_margin = temp_value;
|
|
|
|
temp_value = intel_sdvo_connector->max_hscan -
|
|
|
|
intel_sdvo_connector->left_margin;
|
2009-09-10 15:45:46 +08:00
|
|
|
cmd = SDVO_CMD_SET_OVERSCAN_H;
|
2010-08-04 20:50:28 +08:00
|
|
|
goto set_value;
|
|
|
|
} else if (intel_sdvo_connector->top == property) {
|
2009-09-10 15:45:46 +08:00
|
|
|
drm_connector_property_set_value(connector,
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->bottom, val);
|
2010-08-04 20:50:24 +08:00
|
|
|
if (intel_sdvo_connector->top_margin == temp_value)
|
2010-08-04 20:50:25 +08:00
|
|
|
return 0;
|
2009-09-10 15:45:46 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector->top_margin = temp_value;
|
|
|
|
intel_sdvo_connector->bottom_margin = temp_value;
|
|
|
|
temp_value = intel_sdvo_connector->max_vscan -
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->top_margin;
|
2009-09-10 15:45:46 +08:00
|
|
|
cmd = SDVO_CMD_SET_OVERSCAN_V;
|
2010-08-04 20:50:28 +08:00
|
|
|
goto set_value;
|
|
|
|
} else if (intel_sdvo_connector->bottom == property) {
|
2009-09-10 15:45:46 +08:00
|
|
|
drm_connector_property_set_value(connector,
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->top, val);
|
2010-08-04 20:50:24 +08:00
|
|
|
if (intel_sdvo_connector->bottom_margin == temp_value)
|
2010-08-04 20:50:25 +08:00
|
|
|
return 0;
|
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector->top_margin = temp_value;
|
|
|
|
intel_sdvo_connector->bottom_margin = temp_value;
|
|
|
|
temp_value = intel_sdvo_connector->max_vscan -
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->top_margin;
|
2009-09-10 15:45:46 +08:00
|
|
|
cmd = SDVO_CMD_SET_OVERSCAN_V;
|
2010-08-04 20:50:28 +08:00
|
|
|
goto set_value;
|
|
|
|
}
|
|
|
|
CHECK_PROPERTY(hpos, HPOS)
|
|
|
|
CHECK_PROPERTY(vpos, VPOS)
|
|
|
|
CHECK_PROPERTY(saturation, SATURATION)
|
|
|
|
CHECK_PROPERTY(contrast, CONTRAST)
|
|
|
|
CHECK_PROPERTY(hue, HUE)
|
|
|
|
CHECK_PROPERTY(brightness, BRIGHTNESS)
|
|
|
|
CHECK_PROPERTY(sharpness, SHARPNESS)
|
|
|
|
CHECK_PROPERTY(flicker_filter, FLICKER_FILTER)
|
|
|
|
CHECK_PROPERTY(flicker_filter_2d, FLICKER_FILTER_2D)
|
|
|
|
CHECK_PROPERTY(flicker_filter_adaptive, FLICKER_FILTER_ADAPTIVE)
|
|
|
|
CHECK_PROPERTY(tv_chroma_filter, TV_CHROMA_FILTER)
|
|
|
|
CHECK_PROPERTY(tv_luma_filter, TV_LUMA_FILTER)
|
2010-08-04 20:50:29 +08:00
|
|
|
CHECK_PROPERTY(dot_crawl, DOT_CRAWL)
|
2010-08-04 20:50:28 +08:00
|
|
|
}
|
2009-09-10 15:45:46 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
return -EINVAL; /* unknown property */
|
2009-09-10 15:45:46 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
set_value:
|
|
|
|
if (!intel_sdvo_set_value(intel_sdvo, cmd, &temp_value, 2))
|
|
|
|
return -EIO;
|
2009-09-10 15:45:46 +08:00
|
|
|
|
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
done:
|
2010-09-09 23:20:55 +08:00
|
|
|
if (intel_sdvo->base.base.crtc) {
|
|
|
|
struct drm_crtc *crtc = intel_sdvo->base.base.crtc;
|
2009-08-24 13:50:26 +08:00
|
|
|
drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
|
2010-08-04 20:50:28 +08:00
|
|
|
crtc->y, crtc->fb);
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
return 0;
|
2010-08-04 20:50:28 +08:00
|
|
|
#undef CHECK_PROPERTY
|
2009-08-24 13:50:26 +08:00
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
|
|
|
|
.dpms = intel_sdvo_dpms,
|
|
|
|
.mode_fixup = intel_sdvo_mode_fixup,
|
|
|
|
.prepare = intel_encoder_prepare,
|
|
|
|
.mode_set = intel_sdvo_mode_set,
|
|
|
|
.commit = intel_encoder_commit,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
|
2009-05-31 11:42:28 +08:00
|
|
|
.dpms = drm_helper_connector_dpms,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
.detect = intel_sdvo_detect,
|
|
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
2009-08-24 13:50:26 +08:00
|
|
|
.set_property = intel_sdvo_set_property,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
.destroy = intel_sdvo_destroy,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct drm_connector_helper_funcs intel_sdvo_connector_helper_funcs = {
|
|
|
|
.get_modes = intel_sdvo_get_modes,
|
|
|
|
.mode_valid = intel_sdvo_mode_valid,
|
2010-09-09 23:20:55 +08:00
|
|
|
.best_encoder = intel_best_encoder,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
};
|
|
|
|
|
2008-12-19 04:18:47 +08:00
|
|
|
static void intel_sdvo_enc_destroy(struct drm_encoder *encoder)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2010-09-14 23:46:59 +08:00
|
|
|
struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
|
2010-03-29 21:22:55 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->analog_ddc_bus)
|
|
|
|
intel_i2c_destroy(intel_sdvo->analog_ddc_bus);
|
2010-03-29 21:22:55 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->sdvo_lvds_fixed_mode != NULL)
|
2010-03-29 21:22:55 +08:00
|
|
|
drm_mode_destroy(encoder->dev,
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->sdvo_lvds_fixed_mode);
|
2010-03-29 21:22:55 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_encoder_destroy(encoder);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct drm_encoder_funcs intel_sdvo_enc_funcs = {
|
|
|
|
.destroy = intel_sdvo_enc_destroy,
|
|
|
|
};
|
|
|
|
|
2010-08-12 22:26:41 +08:00
|
|
|
static void
|
|
|
|
intel_sdvo_guess_ddc_bus(struct intel_sdvo *sdvo)
|
|
|
|
{
|
|
|
|
uint16_t mask = 0;
|
|
|
|
unsigned int num_bits;
|
|
|
|
|
|
|
|
/* Make a mask of outputs less than or equal to our own priority in the
|
|
|
|
* list.
|
|
|
|
*/
|
|
|
|
switch (sdvo->controlled_output) {
|
|
|
|
case SDVO_OUTPUT_LVDS1:
|
|
|
|
mask |= SDVO_OUTPUT_LVDS1;
|
|
|
|
case SDVO_OUTPUT_LVDS0:
|
|
|
|
mask |= SDVO_OUTPUT_LVDS0;
|
|
|
|
case SDVO_OUTPUT_TMDS1:
|
|
|
|
mask |= SDVO_OUTPUT_TMDS1;
|
|
|
|
case SDVO_OUTPUT_TMDS0:
|
|
|
|
mask |= SDVO_OUTPUT_TMDS0;
|
|
|
|
case SDVO_OUTPUT_RGB1:
|
|
|
|
mask |= SDVO_OUTPUT_RGB1;
|
|
|
|
case SDVO_OUTPUT_RGB0:
|
|
|
|
mask |= SDVO_OUTPUT_RGB0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Count bits to find what number we are in the priority list. */
|
|
|
|
mask &= sdvo->caps.output_flags;
|
|
|
|
num_bits = hweight16(mask);
|
|
|
|
/* If more than 3 outputs, default to DDC bus 3 for now. */
|
|
|
|
if (num_bits > 3)
|
|
|
|
num_bits = 3;
|
|
|
|
|
|
|
|
/* Corresponds to SDVO_CONTROL_BUS_DDCx */
|
|
|
|
sdvo->ddc_bus = 1 << num_bits;
|
|
|
|
}
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2009-02-03 07:11:52 +08:00
|
|
|
/**
|
|
|
|
* Choose the appropriate DDC bus for control bus switch command for this
|
|
|
|
* SDVO output based on the controlled output.
|
|
|
|
*
|
|
|
|
* DDC bus number assignment is in a priority order of RGB outputs, then TMDS
|
|
|
|
* outputs, then LVDS outputs.
|
|
|
|
*/
|
|
|
|
static void
|
2010-04-24 04:07:40 +08:00
|
|
|
intel_sdvo_select_ddc_bus(struct drm_i915_private *dev_priv,
|
2010-08-04 20:50:23 +08:00
|
|
|
struct intel_sdvo *sdvo, u32 reg)
|
2009-02-03 07:11:52 +08:00
|
|
|
{
|
2010-04-24 04:07:40 +08:00
|
|
|
struct sdvo_device_mapping *mapping;
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-04-24 04:07:40 +08:00
|
|
|
if (IS_SDVOB(reg))
|
|
|
|
mapping = &(dev_priv->sdvo_mappings[0]);
|
|
|
|
else
|
|
|
|
mapping = &(dev_priv->sdvo_mappings[1]);
|
2009-02-03 07:11:52 +08:00
|
|
|
|
2010-08-12 22:26:41 +08:00
|
|
|
if (mapping->initialized)
|
|
|
|
sdvo->ddc_bus = 1 << ((mapping->ddc_pin & 0xf0) >> 4);
|
|
|
|
else
|
|
|
|
intel_sdvo_guess_ddc_bus(sdvo);
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static bool
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_get_digital_encoding_mode(struct intel_sdvo *intel_sdvo, int device)
|
2009-02-03 07:11:52 +08:00
|
|
|
{
|
2010-08-04 20:50:25 +08:00
|
|
|
return intel_sdvo_set_target_output(intel_sdvo,
|
|
|
|
device == 0 ? SDVO_OUTPUT_TMDS0 : SDVO_OUTPUT_TMDS1) &&
|
|
|
|
intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ENCODE,
|
|
|
|
&intel_sdvo->is_hdmi, 1);
|
2009-02-03 07:11:52 +08:00
|
|
|
}
|
|
|
|
|
2009-05-18 16:12:46 +08:00
|
|
|
static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap,
|
|
|
|
struct i2c_msg msgs[], int num)
|
|
|
|
{
|
2010-08-04 20:50:23 +08:00
|
|
|
struct intel_sdvo *intel_sdvo;
|
2009-05-31 03:16:25 +08:00
|
|
|
const struct i2c_algorithm *algo;
|
2010-09-15 02:11:56 +08:00
|
|
|
int ret;
|
2009-05-18 16:12:46 +08:00
|
|
|
|
2010-09-14 23:46:59 +08:00
|
|
|
intel_sdvo = container_of(i2c_adap->algo_data,
|
|
|
|
struct intel_sdvo,
|
|
|
|
base);
|
2010-08-04 20:50:23 +08:00
|
|
|
algo = intel_sdvo->base.i2c_bus->algo;
|
2009-05-18 16:12:46 +08:00
|
|
|
|
2010-09-15 02:11:56 +08:00
|
|
|
ret = intel_sdvo_set_control_bus_switch(intel_sdvo,
|
|
|
|
intel_sdvo->ddc_bus);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2009-05-18 16:12:46 +08:00
|
|
|
return algo->master_xfer(i2c_adap, msgs, num);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct i2c_algorithm intel_sdvo_i2c_bit_algo = {
|
|
|
|
.master_xfer = intel_sdvo_master_xfer,
|
|
|
|
};
|
|
|
|
|
2009-05-31 17:18:07 +08:00
|
|
|
static u8
|
2010-03-26 02:48:48 +08:00
|
|
|
intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg)
|
2009-05-31 17:18:07 +08:00
|
|
|
{
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
struct sdvo_device_mapping *my_mapping, *other_mapping;
|
|
|
|
|
2010-03-30 15:11:33 +08:00
|
|
|
if (IS_SDVOB(sdvo_reg)) {
|
2009-05-31 17:18:07 +08:00
|
|
|
my_mapping = &dev_priv->sdvo_mappings[0];
|
|
|
|
other_mapping = &dev_priv->sdvo_mappings[1];
|
|
|
|
} else {
|
|
|
|
my_mapping = &dev_priv->sdvo_mappings[1];
|
|
|
|
other_mapping = &dev_priv->sdvo_mappings[0];
|
|
|
|
}
|
|
|
|
|
|
|
|
/* If the BIOS described our SDVO device, take advantage of it. */
|
|
|
|
if (my_mapping->slave_addr)
|
|
|
|
return my_mapping->slave_addr;
|
|
|
|
|
|
|
|
/* If the BIOS only described a different SDVO device, use the
|
|
|
|
* address that it isn't using.
|
|
|
|
*/
|
|
|
|
if (other_mapping->slave_addr) {
|
|
|
|
if (other_mapping->slave_addr == 0x70)
|
|
|
|
return 0x72;
|
|
|
|
else
|
|
|
|
return 0x70;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* No SDVO device info is found for another DVO port,
|
|
|
|
* so use mapping assumption we had before BIOS parsing.
|
|
|
|
*/
|
2010-03-30 15:11:33 +08:00
|
|
|
if (IS_SDVOB(sdvo_reg))
|
2009-05-31 17:18:07 +08:00
|
|
|
return 0x70;
|
|
|
|
else
|
|
|
|
return 0x72;
|
|
|
|
}
|
|
|
|
|
2010-03-30 14:06:33 +08:00
|
|
|
static void
|
2010-09-09 23:20:55 +08:00
|
|
|
intel_sdvo_connector_init(struct intel_sdvo_connector *connector,
|
|
|
|
struct intel_sdvo *encoder)
|
2010-03-30 14:06:33 +08:00
|
|
|
{
|
2010-09-09 23:20:55 +08:00
|
|
|
drm_connector_init(encoder->base.base.dev,
|
|
|
|
&connector->base.base,
|
|
|
|
&intel_sdvo_connector_funcs,
|
|
|
|
connector->base.base.connector_type);
|
2010-02-08 21:35:12 +08:00
|
|
|
|
2010-09-09 23:20:55 +08:00
|
|
|
drm_connector_helper_add(&connector->base.base,
|
|
|
|
&intel_sdvo_connector_helper_funcs);
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 23:20:55 +08:00
|
|
|
connector->base.base.interlace_allowed = 0;
|
|
|
|
connector->base.base.doublescan_allowed = 0;
|
|
|
|
connector->base.base.display_info.subpixel_order = SubPixelHorizontalRGB;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 23:20:55 +08:00
|
|
|
intel_connector_attach_encoder(&connector->base, &encoder->base);
|
|
|
|
drm_sysfs_connector_add(&connector->base.base);
|
2010-03-30 14:06:33 +08:00
|
|
|
}
|
2010-02-08 21:35:12 +08:00
|
|
|
|
2009-07-23 17:11:34 +08:00
|
|
|
static bool
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
|
2009-07-23 17:11:34 +08:00
|
|
|
{
|
2010-09-09 22:14:28 +08:00
|
|
|
struct drm_encoder *encoder = &intel_sdvo->base.base;
|
2010-03-30 14:06:33 +08:00
|
|
|
struct drm_connector *connector;
|
|
|
|
struct intel_connector *intel_connector;
|
2010-08-04 20:50:24 +08:00
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector = kzalloc(sizeof(struct intel_sdvo_connector), GFP_KERNEL);
|
|
|
|
if (!intel_sdvo_connector)
|
2010-03-30 14:06:33 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
if (device == 0) {
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->controlled_output |= SDVO_OUTPUT_TMDS0;
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector->output_flag = SDVO_OUTPUT_TMDS0;
|
2010-03-30 14:06:33 +08:00
|
|
|
} else if (device == 1) {
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->controlled_output |= SDVO_OUTPUT_TMDS1;
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector->output_flag = SDVO_OUTPUT_TMDS1;
|
2010-03-30 14:06:33 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_connector = &intel_sdvo_connector->base;
|
2010-03-30 14:06:33 +08:00
|
|
|
connector = &intel_connector->base;
|
2010-05-07 14:42:51 +08:00
|
|
|
connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
|
2010-03-30 14:06:33 +08:00
|
|
|
encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
|
|
|
|
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo_get_supp_encode(intel_sdvo, &intel_sdvo->encode)
|
|
|
|
&& intel_sdvo_get_digital_encoding_mode(intel_sdvo, device)
|
|
|
|
&& intel_sdvo->is_hdmi) {
|
2010-03-30 14:06:33 +08:00
|
|
|
/* enable hdmi encoding mode if supported */
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI);
|
|
|
|
intel_sdvo_set_colorimetry(intel_sdvo,
|
2010-03-30 14:06:33 +08:00
|
|
|
SDVO_COLORIMETRY_RGB256);
|
|
|
|
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
|
|
|
|
}
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
|
|
|
|
(1 << INTEL_ANALOG_CLONE_BIT));
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 23:20:55 +08:00
|
|
|
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
|
2010-03-30 14:06:33 +08:00
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
|
2010-03-30 14:06:33 +08:00
|
|
|
{
|
2010-09-09 22:14:28 +08:00
|
|
|
struct drm_encoder *encoder = &intel_sdvo->base.base;
|
|
|
|
struct drm_connector *connector;
|
|
|
|
struct intel_connector *intel_connector;
|
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector = kzalloc(sizeof(struct intel_sdvo_connector), GFP_KERNEL);
|
|
|
|
if (!intel_sdvo_connector)
|
|
|
|
return false;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_connector = &intel_sdvo_connector->base;
|
2010-09-09 22:14:28 +08:00
|
|
|
connector = &intel_connector->base;
|
|
|
|
encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
|
|
|
|
connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 22:14:28 +08:00
|
|
|
intel_sdvo->controlled_output |= type;
|
|
|
|
intel_sdvo_connector->output_flag = type;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 22:14:28 +08:00
|
|
|
intel_sdvo->is_tv = true;
|
|
|
|
intel_sdvo->base.needs_tv_clock = true;
|
|
|
|
intel_sdvo->base.clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 23:20:55 +08:00
|
|
|
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 22:14:28 +08:00
|
|
|
if (!intel_sdvo_tv_create_property(intel_sdvo, intel_sdvo_connector, type))
|
2010-08-04 20:50:25 +08:00
|
|
|
goto err;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 22:14:28 +08:00
|
|
|
if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
|
2010-08-04 20:50:25 +08:00
|
|
|
goto err;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 22:14:28 +08:00
|
|
|
return true;
|
2010-08-04 20:50:25 +08:00
|
|
|
|
|
|
|
err:
|
2010-08-04 20:50:27 +08:00
|
|
|
intel_sdvo_destroy_enhance_property(connector);
|
2010-08-04 20:50:25 +08:00
|
|
|
kfree(intel_sdvo_connector);
|
|
|
|
return false;
|
2010-03-30 14:06:33 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static bool
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device)
|
2010-03-30 14:06:33 +08:00
|
|
|
{
|
2010-09-09 22:14:28 +08:00
|
|
|
struct drm_encoder *encoder = &intel_sdvo->base.base;
|
|
|
|
struct drm_connector *connector;
|
|
|
|
struct intel_connector *intel_connector;
|
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector = kzalloc(sizeof(struct intel_sdvo_connector), GFP_KERNEL);
|
|
|
|
if (!intel_sdvo_connector)
|
|
|
|
return false;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_connector = &intel_sdvo_connector->base;
|
2010-09-09 22:14:28 +08:00
|
|
|
connector = &intel_connector->base;
|
2010-05-07 14:42:51 +08:00
|
|
|
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
|
2010-09-09 22:14:28 +08:00
|
|
|
encoder->encoder_type = DRM_MODE_ENCODER_DAC;
|
|
|
|
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
|
|
|
|
|
|
|
|
if (device == 0) {
|
|
|
|
intel_sdvo->controlled_output |= SDVO_OUTPUT_RGB0;
|
|
|
|
intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB0;
|
|
|
|
} else if (device == 1) {
|
|
|
|
intel_sdvo->controlled_output |= SDVO_OUTPUT_RGB1;
|
|
|
|
intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1;
|
|
|
|
}
|
|
|
|
|
|
|
|
intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
|
2010-08-04 20:50:23 +08:00
|
|
|
(1 << INTEL_ANALOG_CLONE_BIT));
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 23:20:55 +08:00
|
|
|
intel_sdvo_connector_init(intel_sdvo_connector,
|
|
|
|
intel_sdvo);
|
2010-09-09 22:14:28 +08:00
|
|
|
return true;
|
2010-03-30 14:06:33 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static bool
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device)
|
2010-03-30 14:06:33 +08:00
|
|
|
{
|
2010-09-09 22:14:28 +08:00
|
|
|
struct drm_encoder *encoder = &intel_sdvo->base.base;
|
|
|
|
struct drm_connector *connector;
|
|
|
|
struct intel_connector *intel_connector;
|
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector = kzalloc(sizeof(struct intel_sdvo_connector), GFP_KERNEL);
|
|
|
|
if (!intel_sdvo_connector)
|
|
|
|
return false;
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_connector = &intel_sdvo_connector->base;
|
|
|
|
connector = &intel_connector->base;
|
2010-09-09 22:14:28 +08:00
|
|
|
encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
|
|
|
|
connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
|
|
|
|
|
|
|
|
if (device == 0) {
|
|
|
|
intel_sdvo->controlled_output |= SDVO_OUTPUT_LVDS0;
|
|
|
|
intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS0;
|
|
|
|
} else if (device == 1) {
|
|
|
|
intel_sdvo->controlled_output |= SDVO_OUTPUT_LVDS1;
|
|
|
|
intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1;
|
|
|
|
}
|
|
|
|
|
|
|
|
intel_sdvo->base.clone_mask = ((1 << INTEL_ANALOG_CLONE_BIT) |
|
2010-08-04 20:50:23 +08:00
|
|
|
(1 << INTEL_SDVO_LVDS_CLONE_BIT));
|
2010-03-30 14:06:33 +08:00
|
|
|
|
2010-09-09 23:20:55 +08:00
|
|
|
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
|
2010-09-09 22:14:28 +08:00
|
|
|
if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
|
2010-08-04 20:50:25 +08:00
|
|
|
goto err;
|
|
|
|
|
|
|
|
return true;
|
|
|
|
|
|
|
|
err:
|
2010-08-04 20:50:27 +08:00
|
|
|
intel_sdvo_destroy_enhance_property(connector);
|
2010-08-04 20:50:25 +08:00
|
|
|
kfree(intel_sdvo_connector);
|
|
|
|
return false;
|
2010-03-30 14:06:33 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static bool
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags)
|
2010-03-30 14:06:33 +08:00
|
|
|
{
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->is_tv = false;
|
|
|
|
intel_sdvo->base.needs_tv_clock = false;
|
|
|
|
intel_sdvo->is_lvds = false;
|
2009-07-23 17:11:34 +08:00
|
|
|
|
2010-03-30 14:06:33 +08:00
|
|
|
/* SDVO requires XXX1 function may not exist unless it has XXX0 function.*/
|
2009-07-23 17:11:34 +08:00
|
|
|
|
2010-03-30 14:06:33 +08:00
|
|
|
if (flags & SDVO_OUTPUT_TMDS0)
|
2010-08-04 20:50:23 +08:00
|
|
|
if (!intel_sdvo_dvi_init(intel_sdvo, 0))
|
2010-03-30 14:06:33 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
if ((flags & SDVO_TMDS_MASK) == SDVO_TMDS_MASK)
|
2010-08-04 20:50:23 +08:00
|
|
|
if (!intel_sdvo_dvi_init(intel_sdvo, 1))
|
2010-03-30 14:06:33 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
/* TV has no XXX1 function block */
|
2010-03-29 23:16:13 +08:00
|
|
|
if (flags & SDVO_OUTPUT_SVID0)
|
2010-08-04 20:50:23 +08:00
|
|
|
if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_SVID0))
|
2010-03-30 14:06:33 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
if (flags & SDVO_OUTPUT_CVBS0)
|
2010-08-04 20:50:23 +08:00
|
|
|
if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_CVBS0))
|
2010-03-30 14:06:33 +08:00
|
|
|
return false;
|
2009-07-23 17:11:34 +08:00
|
|
|
|
2010-03-30 14:06:33 +08:00
|
|
|
if (flags & SDVO_OUTPUT_RGB0)
|
2010-08-04 20:50:23 +08:00
|
|
|
if (!intel_sdvo_analog_init(intel_sdvo, 0))
|
2010-03-30 14:06:33 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
if ((flags & SDVO_RGB_MASK) == SDVO_RGB_MASK)
|
2010-08-04 20:50:23 +08:00
|
|
|
if (!intel_sdvo_analog_init(intel_sdvo, 1))
|
2010-03-30 14:06:33 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
if (flags & SDVO_OUTPUT_LVDS0)
|
2010-08-04 20:50:23 +08:00
|
|
|
if (!intel_sdvo_lvds_init(intel_sdvo, 0))
|
2010-03-30 14:06:33 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
if ((flags & SDVO_LVDS_MASK) == SDVO_LVDS_MASK)
|
2010-08-04 20:50:23 +08:00
|
|
|
if (!intel_sdvo_lvds_init(intel_sdvo, 1))
|
2010-03-30 14:06:33 +08:00
|
|
|
return false;
|
2009-07-23 17:11:34 +08:00
|
|
|
|
2010-03-30 14:06:33 +08:00
|
|
|
if ((flags & SDVO_OUTPUT_MASK) == 0) {
|
2009-07-23 17:11:34 +08:00
|
|
|
unsigned char bytes[2];
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->controlled_output = 0;
|
|
|
|
memcpy(bytes, &intel_sdvo->caps.output_flags, 2);
|
2009-08-20 11:38:04 +08:00
|
|
|
DRM_DEBUG_KMS("%s: Unknown SDVO output type (0x%02x%02x)\n",
|
2010-08-04 20:50:23 +08:00
|
|
|
SDVO_NAME(intel_sdvo),
|
2009-08-20 11:38:04 +08:00
|
|
|
bytes[0], bytes[1]);
|
2010-03-30 14:06:33 +08:00
|
|
|
return false;
|
2009-07-23 17:11:34 +08:00
|
|
|
}
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->base.crtc_mask = (1 << 0) | (1 << 1);
|
2009-07-23 17:11:34 +08:00
|
|
|
|
2010-03-30 14:06:33 +08:00
|
|
|
return true;
|
2009-07-23 17:11:34 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
|
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector,
|
|
|
|
int type)
|
2009-08-24 13:50:26 +08:00
|
|
|
{
|
2010-09-09 22:14:28 +08:00
|
|
|
struct drm_device *dev = intel_sdvo->base.base.dev;
|
2009-08-24 13:50:26 +08:00
|
|
|
struct intel_sdvo_tv_format format;
|
|
|
|
uint32_t format_map, i;
|
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_set_target_output(intel_sdvo, type))
|
|
|
|
return false;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_get_value(intel_sdvo,
|
|
|
|
SDVO_CMD_GET_SUPPORTED_TV_FORMATS,
|
|
|
|
&format, sizeof(format)))
|
|
|
|
return false;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
memcpy(&format_map, &format, min(sizeof(format_map), sizeof(format)));
|
2009-08-24 13:50:26 +08:00
|
|
|
|
|
|
|
if (format_map == 0)
|
2010-08-04 20:50:25 +08:00
|
|
|
return false;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
intel_sdvo_connector->format_supported_num = 0;
|
2009-08-24 13:50:26 +08:00
|
|
|
for (i = 0 ; i < TV_FORMAT_NUM; i++)
|
2010-08-04 20:50:26 +08:00
|
|
|
if (format_map & (1 << i))
|
|
|
|
intel_sdvo_connector->tv_format_supported[intel_sdvo_connector->format_supported_num++] = i;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->tv_format =
|
2010-08-04 20:50:25 +08:00
|
|
|
drm_property_create(dev, DRM_MODE_PROP_ENUM,
|
|
|
|
"mode", intel_sdvo_connector->format_supported_num);
|
2010-08-04 20:50:28 +08:00
|
|
|
if (!intel_sdvo_connector->tv_format)
|
2010-08-04 20:50:27 +08:00
|
|
|
return false;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:24 +08:00
|
|
|
for (i = 0; i < intel_sdvo_connector->format_supported_num; i++)
|
2009-08-24 13:50:26 +08:00
|
|
|
drm_property_add_enum(
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->tv_format, i,
|
2010-08-04 20:50:26 +08:00
|
|
|
i, tv_format_names[intel_sdvo_connector->tv_format_supported[i]]);
|
2009-08-24 13:50:26 +08:00
|
|
|
|
2010-08-04 20:50:26 +08:00
|
|
|
intel_sdvo->tv_format_index = intel_sdvo_connector->tv_format_supported[0];
|
2010-08-04 20:50:25 +08:00
|
|
|
drm_connector_attach_property(&intel_sdvo_connector->base.base,
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->tv_format, 0);
|
2010-08-04 20:50:25 +08:00
|
|
|
return true;
|
2009-08-24 13:50:26 +08:00
|
|
|
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
#define ENHANCEMENT(name, NAME) do { \
|
|
|
|
if (enhancements.name) { \
|
|
|
|
if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_MAX_##NAME, &data_value, 4) || \
|
|
|
|
!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_##NAME, &response, 2)) \
|
|
|
|
return false; \
|
|
|
|
intel_sdvo_connector->max_##name = data_value[0]; \
|
|
|
|
intel_sdvo_connector->cur_##name = response; \
|
|
|
|
intel_sdvo_connector->name = \
|
|
|
|
drm_property_create(dev, DRM_MODE_PROP_RANGE, #name, 2); \
|
|
|
|
if (!intel_sdvo_connector->name) return false; \
|
|
|
|
intel_sdvo_connector->name->values[0] = 0; \
|
|
|
|
intel_sdvo_connector->name->values[1] = data_value[0]; \
|
|
|
|
drm_connector_attach_property(connector, \
|
|
|
|
intel_sdvo_connector->name, \
|
|
|
|
intel_sdvo_connector->cur_##name); \
|
|
|
|
DRM_DEBUG_KMS(#name ": max %d, default %d, current %d\n", \
|
|
|
|
data_value[0], data_value[1], response); \
|
|
|
|
} \
|
|
|
|
} while(0)
|
|
|
|
|
|
|
|
static bool
|
|
|
|
intel_sdvo_create_enhance_property_tv(struct intel_sdvo *intel_sdvo,
|
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector,
|
|
|
|
struct intel_sdvo_enhancements_reply enhancements)
|
2009-09-10 15:45:46 +08:00
|
|
|
{
|
2010-09-09 22:14:28 +08:00
|
|
|
struct drm_device *dev = intel_sdvo->base.base.dev;
|
2010-08-04 20:50:25 +08:00
|
|
|
struct drm_connector *connector = &intel_sdvo_connector->base.base;
|
2009-09-10 15:45:46 +08:00
|
|
|
uint16_t response, data_value[2];
|
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
/* when horizontal overscan is supported, Add the left/right property */
|
|
|
|
if (enhancements.overscan_h) {
|
|
|
|
if (!intel_sdvo_get_value(intel_sdvo,
|
|
|
|
SDVO_CMD_GET_MAX_OVERSCAN_H,
|
|
|
|
&data_value, 4))
|
|
|
|
return false;
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
if (!intel_sdvo_get_value(intel_sdvo,
|
|
|
|
SDVO_CMD_GET_OVERSCAN_H,
|
|
|
|
&response, 2))
|
|
|
|
return false;
|
2010-08-04 20:50:27 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->max_hscan = data_value[0];
|
|
|
|
intel_sdvo_connector->left_margin = data_value[0] - response;
|
|
|
|
intel_sdvo_connector->right_margin = intel_sdvo_connector->left_margin;
|
|
|
|
intel_sdvo_connector->left =
|
|
|
|
drm_property_create(dev, DRM_MODE_PROP_RANGE,
|
|
|
|
"left_margin", 2);
|
|
|
|
if (!intel_sdvo_connector->left)
|
|
|
|
return false;
|
2010-08-04 20:50:27 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->left->values[0] = 0;
|
|
|
|
intel_sdvo_connector->left->values[1] = data_value[0];
|
|
|
|
drm_connector_attach_property(connector,
|
|
|
|
intel_sdvo_connector->left,
|
|
|
|
intel_sdvo_connector->left_margin);
|
2010-08-04 20:50:27 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->right =
|
|
|
|
drm_property_create(dev, DRM_MODE_PROP_RANGE,
|
|
|
|
"right_margin", 2);
|
|
|
|
if (!intel_sdvo_connector->right)
|
|
|
|
return false;
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->right->values[0] = 0;
|
|
|
|
intel_sdvo_connector->right->values[1] = data_value[0];
|
|
|
|
drm_connector_attach_property(connector,
|
|
|
|
intel_sdvo_connector->right,
|
|
|
|
intel_sdvo_connector->right_margin);
|
|
|
|
DRM_DEBUG_KMS("h_overscan: max %d, "
|
|
|
|
"default %d, current %d\n",
|
|
|
|
data_value[0], data_value[1], response);
|
|
|
|
}
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
if (enhancements.overscan_v) {
|
|
|
|
if (!intel_sdvo_get_value(intel_sdvo,
|
|
|
|
SDVO_CMD_GET_MAX_OVERSCAN_V,
|
|
|
|
&data_value, 4))
|
|
|
|
return false;
|
2010-08-04 20:50:27 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
if (!intel_sdvo_get_value(intel_sdvo,
|
|
|
|
SDVO_CMD_GET_OVERSCAN_V,
|
|
|
|
&response, 2))
|
|
|
|
return false;
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->max_vscan = data_value[0];
|
|
|
|
intel_sdvo_connector->top_margin = data_value[0] - response;
|
|
|
|
intel_sdvo_connector->bottom_margin = intel_sdvo_connector->top_margin;
|
|
|
|
intel_sdvo_connector->top =
|
|
|
|
drm_property_create(dev, DRM_MODE_PROP_RANGE,
|
|
|
|
"top_margin", 2);
|
|
|
|
if (!intel_sdvo_connector->top)
|
|
|
|
return false;
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->top->values[0] = 0;
|
|
|
|
intel_sdvo_connector->top->values[1] = data_value[0];
|
|
|
|
drm_connector_attach_property(connector,
|
|
|
|
intel_sdvo_connector->top,
|
|
|
|
intel_sdvo_connector->top_margin);
|
2010-08-04 20:50:27 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->bottom =
|
|
|
|
drm_property_create(dev, DRM_MODE_PROP_RANGE,
|
|
|
|
"bottom_margin", 2);
|
|
|
|
if (!intel_sdvo_connector->bottom)
|
|
|
|
return false;
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
intel_sdvo_connector->bottom->values[0] = 0;
|
|
|
|
intel_sdvo_connector->bottom->values[1] = data_value[0];
|
|
|
|
drm_connector_attach_property(connector,
|
|
|
|
intel_sdvo_connector->bottom,
|
|
|
|
intel_sdvo_connector->bottom_margin);
|
|
|
|
DRM_DEBUG_KMS("v_overscan: max %d, "
|
|
|
|
"default %d, current %d\n",
|
|
|
|
data_value[0], data_value[1], response);
|
|
|
|
}
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
ENHANCEMENT(hpos, HPOS);
|
|
|
|
ENHANCEMENT(vpos, VPOS);
|
|
|
|
ENHANCEMENT(saturation, SATURATION);
|
|
|
|
ENHANCEMENT(contrast, CONTRAST);
|
|
|
|
ENHANCEMENT(hue, HUE);
|
|
|
|
ENHANCEMENT(sharpness, SHARPNESS);
|
|
|
|
ENHANCEMENT(brightness, BRIGHTNESS);
|
|
|
|
ENHANCEMENT(flicker_filter, FLICKER_FILTER);
|
|
|
|
ENHANCEMENT(flicker_filter_adaptive, FLICKER_FILTER_ADAPTIVE);
|
|
|
|
ENHANCEMENT(flicker_filter_2d, FLICKER_FILTER_2D);
|
|
|
|
ENHANCEMENT(tv_chroma_filter, TV_CHROMA_FILTER);
|
|
|
|
ENHANCEMENT(tv_luma_filter, TV_LUMA_FILTER);
|
2010-08-04 20:50:27 +08:00
|
|
|
|
2010-08-04 20:50:29 +08:00
|
|
|
if (enhancements.dot_crawl) {
|
|
|
|
if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_DOT_CRAWL, &response, 2))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
intel_sdvo_connector->max_dot_crawl = 1;
|
|
|
|
intel_sdvo_connector->cur_dot_crawl = response & 0x1;
|
|
|
|
intel_sdvo_connector->dot_crawl =
|
|
|
|
drm_property_create(dev, DRM_MODE_PROP_RANGE, "dot_crawl", 2);
|
|
|
|
if (!intel_sdvo_connector->dot_crawl)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
intel_sdvo_connector->dot_crawl->values[0] = 0;
|
|
|
|
intel_sdvo_connector->dot_crawl->values[1] = 1;
|
|
|
|
drm_connector_attach_property(connector,
|
|
|
|
intel_sdvo_connector->dot_crawl,
|
|
|
|
intel_sdvo_connector->cur_dot_crawl);
|
|
|
|
DRM_DEBUG_KMS("dot crawl: current %d\n", response);
|
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
return true;
|
|
|
|
}
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
static bool
|
|
|
|
intel_sdvo_create_enhance_property_lvds(struct intel_sdvo *intel_sdvo,
|
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector,
|
|
|
|
struct intel_sdvo_enhancements_reply enhancements)
|
|
|
|
{
|
2010-09-09 22:14:28 +08:00
|
|
|
struct drm_device *dev = intel_sdvo->base.base.dev;
|
2010-08-04 20:50:28 +08:00
|
|
|
struct drm_connector *connector = &intel_sdvo_connector->base.base;
|
|
|
|
uint16_t response, data_value[2];
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
ENHANCEMENT(brightness, BRIGHTNESS);
|
2010-08-04 20:50:27 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
#undef ENHANCEMENT
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
static bool intel_sdvo_create_enhance_property(struct intel_sdvo *intel_sdvo,
|
|
|
|
struct intel_sdvo_connector *intel_sdvo_connector)
|
|
|
|
{
|
|
|
|
union {
|
|
|
|
struct intel_sdvo_enhancements_reply reply;
|
|
|
|
uint16_t response;
|
|
|
|
} enhancements;
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
if (!intel_sdvo_get_value(intel_sdvo,
|
|
|
|
SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
|
|
|
|
&enhancements, sizeof(enhancements)))
|
|
|
|
return false;
|
2010-08-04 20:50:27 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
if (enhancements.response == 0) {
|
|
|
|
DRM_DEBUG_KMS("No enhancement is supported\n");
|
|
|
|
return true;
|
2009-09-10 15:45:46 +08:00
|
|
|
}
|
2010-08-04 20:50:25 +08:00
|
|
|
|
2010-08-04 20:50:28 +08:00
|
|
|
if (IS_TV(intel_sdvo_connector))
|
|
|
|
return intel_sdvo_create_enhance_property_tv(intel_sdvo, intel_sdvo_connector, enhancements.reply);
|
|
|
|
else if(IS_LVDS(intel_sdvo_connector))
|
|
|
|
return intel_sdvo_create_enhance_property_lvds(intel_sdvo, intel_sdvo_connector, enhancements.reply);
|
|
|
|
else
|
|
|
|
return true;
|
2010-08-04 20:50:27 +08:00
|
|
|
|
2009-09-10 15:45:46 +08:00
|
|
|
}
|
|
|
|
|
2010-03-26 02:48:48 +08:00
|
|
|
bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
{
|
2009-12-12 03:07:17 +08:00
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
2010-03-26 02:11:14 +08:00
|
|
|
struct intel_encoder *intel_encoder;
|
2010-08-04 20:50:23 +08:00
|
|
|
struct intel_sdvo *intel_sdvo;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
u8 ch[0x40];
|
|
|
|
int i;
|
2010-03-30 15:11:33 +08:00
|
|
|
u32 i2c_reg, ddc_reg, analog_ddc_reg;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo = kzalloc(sizeof(struct intel_sdvo), GFP_KERNEL);
|
|
|
|
if (!intel_sdvo)
|
2009-01-03 05:33:00 +08:00
|
|
|
return false;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->sdvo_reg = sdvo_reg;
|
2009-06-15 02:56:18 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_encoder = &intel_sdvo->base;
|
2010-03-26 02:11:14 +08:00
|
|
|
intel_encoder->type = INTEL_OUTPUT_SDVO;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-03-30 15:11:33 +08:00
|
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
|
|
i2c_reg = PCH_GPIOE;
|
|
|
|
ddc_reg = PCH_GPIOE;
|
|
|
|
analog_ddc_reg = PCH_GPIOA;
|
|
|
|
} else {
|
|
|
|
i2c_reg = GPIOE;
|
|
|
|
ddc_reg = GPIOE;
|
|
|
|
analog_ddc_reg = GPIOA;
|
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
/* setup the DDC bus. */
|
2010-03-30 15:11:33 +08:00
|
|
|
if (IS_SDVOB(sdvo_reg))
|
2010-09-14 23:46:59 +08:00
|
|
|
intel_encoder->i2c_bus =
|
|
|
|
intel_i2c_create(intel_encoder,
|
|
|
|
i2c_reg, "SDVOCTRL_E for SDVOB");
|
2009-06-15 02:56:18 +08:00
|
|
|
else
|
2010-09-14 23:46:59 +08:00
|
|
|
intel_encoder->i2c_bus =
|
|
|
|
intel_i2c_create(intel_encoder,
|
|
|
|
i2c_reg, "SDVOCTRL_E for SDVOC");
|
2009-06-15 02:56:18 +08:00
|
|
|
|
2010-03-26 02:11:14 +08:00
|
|
|
if (!intel_encoder->i2c_bus)
|
2009-05-15 15:10:41 +08:00
|
|
|
goto err_inteloutput;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, sdvo_reg);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2009-06-15 02:56:18 +08:00
|
|
|
/* Save the bit-banging i2c functionality for use by the DDC wrapper */
|
2010-03-26 02:11:14 +08:00
|
|
|
intel_sdvo_i2c_bit_algo.functionality = intel_encoder->i2c_bus->algo->functionality;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
|
|
|
/* Read the regs to test if we can talk to the device */
|
|
|
|
for (i = 0; i < 0x40; i++) {
|
2010-08-04 20:50:23 +08:00
|
|
|
if (!intel_sdvo_read_byte(intel_sdvo, i, &ch[i])) {
|
2009-07-20 13:48:04 +08:00
|
|
|
DRM_DEBUG_KMS("No SDVO device found on SDVO%c\n",
|
2010-03-30 15:11:33 +08:00
|
|
|
IS_SDVOB(sdvo_reg) ? 'B' : 'C');
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
goto err_i2c;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-05-18 16:12:46 +08:00
|
|
|
/* setup the DDC bus. */
|
2010-03-30 15:11:33 +08:00
|
|
|
if (IS_SDVOB(sdvo_reg)) {
|
2010-09-14 23:46:59 +08:00
|
|
|
intel_encoder->ddc_bus =
|
|
|
|
intel_i2c_create(intel_encoder,
|
|
|
|
ddc_reg, "SDVOB DDC BUS");
|
|
|
|
intel_sdvo->analog_ddc_bus =
|
|
|
|
intel_i2c_create(intel_encoder,
|
|
|
|
analog_ddc_reg, "SDVOB/VGA DDC BUS");
|
2009-12-12 03:07:17 +08:00
|
|
|
dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
|
2009-09-04 13:07:54 +08:00
|
|
|
} else {
|
2010-09-14 23:46:59 +08:00
|
|
|
intel_encoder->ddc_bus =
|
|
|
|
intel_i2c_create(intel_encoder,
|
|
|
|
ddc_reg, "SDVOC DDC BUS");
|
|
|
|
intel_sdvo->analog_ddc_bus =
|
|
|
|
intel_i2c_create(intel_encoder,
|
|
|
|
analog_ddc_reg, "SDVOC/VGA DDC BUS");
|
2009-12-12 03:07:17 +08:00
|
|
|
dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
|
2009-09-04 13:07:54 +08:00
|
|
|
}
|
2010-08-04 20:50:25 +08:00
|
|
|
if (intel_encoder->ddc_bus == NULL || intel_sdvo->analog_ddc_bus == NULL)
|
2009-05-18 16:12:46 +08:00
|
|
|
goto err_i2c;
|
|
|
|
|
2009-06-15 02:56:18 +08:00
|
|
|
/* Wrap with our custom algo which switches to DDC mode */
|
2010-03-26 02:11:14 +08:00
|
|
|
intel_encoder->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
|
2009-05-18 16:12:46 +08:00
|
|
|
|
2010-03-30 14:06:33 +08:00
|
|
|
/* encoder type will be decided later */
|
2010-09-09 22:14:28 +08:00
|
|
|
drm_encoder_init(dev, &intel_encoder->base, &intel_sdvo_enc_funcs, 0);
|
|
|
|
drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
|
2010-03-30 14:06:33 +08:00
|
|
|
|
tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-14 23:09:05 +08:00
|
|
|
/* In default case sdvo lvds is false */
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
|
|
|
|
goto err_enc;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo_output_setup(intel_sdvo,
|
|
|
|
intel_sdvo->caps.output_flags) != true) {
|
2009-08-20 11:38:04 +08:00
|
|
|
DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
|
2010-03-30 15:11:33 +08:00
|
|
|
IS_SDVOB(sdvo_reg) ? 'B' : 'C');
|
2010-08-04 20:50:25 +08:00
|
|
|
goto err_enc;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|
|
|
|
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
|
2009-02-03 07:11:52 +08:00
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
/* Set the input timing to the screen. Assume always input 0. */
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_set_target_input(intel_sdvo))
|
|
|
|
goto err_enc;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo,
|
|
|
|
&intel_sdvo->pixel_clock_min,
|
|
|
|
&intel_sdvo->pixel_clock_max))
|
|
|
|
goto err_enc;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2009-07-20 13:48:04 +08:00
|
|
|
DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
|
2009-06-02 14:12:00 +08:00
|
|
|
"clock range %dMHz - %dMHz, "
|
|
|
|
"input 1: %c, input 2: %c, "
|
|
|
|
"output 1: %c, output 2: %c\n",
|
2010-08-04 20:50:23 +08:00
|
|
|
SDVO_NAME(intel_sdvo),
|
|
|
|
intel_sdvo->caps.vendor_id, intel_sdvo->caps.device_id,
|
|
|
|
intel_sdvo->caps.device_rev_id,
|
|
|
|
intel_sdvo->pixel_clock_min / 1000,
|
|
|
|
intel_sdvo->pixel_clock_max / 1000,
|
|
|
|
(intel_sdvo->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N',
|
|
|
|
(intel_sdvo->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N',
|
2009-06-02 14:12:00 +08:00
|
|
|
/* check currently supported outputs */
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->caps.output_flags &
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
(SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N',
|
2010-08-04 20:50:23 +08:00
|
|
|
intel_sdvo->caps.output_flags &
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
|
2009-01-03 05:33:00 +08:00
|
|
|
return true;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2010-08-04 20:50:25 +08:00
|
|
|
err_enc:
|
2010-09-09 22:14:28 +08:00
|
|
|
drm_encoder_cleanup(&intel_encoder->base);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
err_i2c:
|
2010-08-04 20:50:23 +08:00
|
|
|
if (intel_sdvo->analog_ddc_bus != NULL)
|
|
|
|
intel_i2c_destroy(intel_sdvo->analog_ddc_bus);
|
2010-03-26 02:11:14 +08:00
|
|
|
if (intel_encoder->ddc_bus != NULL)
|
|
|
|
intel_i2c_destroy(intel_encoder->ddc_bus);
|
|
|
|
if (intel_encoder->i2c_bus != NULL)
|
|
|
|
intel_i2c_destroy(intel_encoder->i2c_bus);
|
2009-05-15 15:10:41 +08:00
|
|
|
err_inteloutput:
|
2010-08-04 20:50:23 +08:00
|
|
|
kfree(intel_sdvo);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
|
2009-01-03 05:33:00 +08:00
|
|
|
return false;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
|
|
|
}
|