linux/drivers/pinctrl/pinctrl-rockchip.c

4001 lines
117 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Pinctrl driver for Rockchip SoCs
*
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* With some ideas taken from pinctrl-samsung:
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2012 Linaro Ltd
* https://www.linaro.org
*
* and pinctrl-at91:
* Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/gpio/driver.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/clk.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/string_helpers.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "core.h"
#include "pinconf.h"
#include "pinctrl-rockchip.h"
/*
* Generate a bitmask for setting a value (v) with a write mask bit in hiword
* register 31:16 area.
*/
#define WRITE_MASK_VAL(h, l, v) \
(GENMASK(((h) + 16), ((l) + 16)) | (((v) << (l)) & GENMASK((h), (l))))
pinctrl: pinctrl-rockchip: Fix a bunch of kerneldoc misdemeanours Demote headers which are clearly not kerneldoc, provide titles for struct definition blocks, fix API slip (bitrot) misspellings and provide some missing entries. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-rockchip.c:82: warning: cannot understand function prototype: 'struct rockchip_iomux ' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_OR_3V0' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_3V0_AUTO' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_3V3_ONLY' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_MAX' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_pull_type' drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_pull_type' drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_MAX' not described in enum 'rockchip_pin_pull_type' drivers/pinctrl/pinctrl-rockchip.c:109: warning: Cannot understand * @drv_type: drive strength variant using rockchip_perpin_drv_type on line 109 - I thought it was a doc line drivers/pinctrl/pinctrl-rockchip.c:122: warning: Cannot understand * @reg_base: register base of the gpio bank on line 109 - I thought it was a doc line drivers/pinctrl/pinctrl-rockchip.c:325: warning: Function parameter or member 'route_location' not described in 'rockchip_mux_route_data' drivers/pinctrl/pinctrl-rockchip.c:328: warning: Cannot understand */ on line 109 - I thought it was a doc line drivers/pinctrl/pinctrl-rockchip.c:375: warning: Function parameter or member 'data' not described in 'rockchip_pin_group' drivers/pinctrl/pinctrl-rockchip.c:387: warning: Function parameter or member 'ngroups' not described in 'rockchip_pmx_func' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: linux-rockchip@lists.infradead.org Link: https://lore.kernel.org/r/20200713144930.1034632-20-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-13 22:49:24 +08:00
/*
* Encode variants of iomux registers into a type variable
*/
#define IOMUX_GPIO_ONLY BIT(0)
#define IOMUX_WIDTH_4BIT BIT(1)
#define IOMUX_SOURCE_PMU BIT(2)
#define IOMUX_UNROUTED BIT(3)
#define IOMUX_WIDTH_3BIT BIT(4)
#define IOMUX_WIDTH_2BIT BIT(5)
#define IOMUX_L_SOURCE_PMU BIT(6)
#define PIN_BANK(id, pins, label) \
{ \
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .offset = -1 }, \
{ .offset = -1 }, \
{ .offset = -1 }, \
{ .offset = -1 }, \
}, \
}
#define PIN_BANK_IOMUX_FLAGS(id, pins, label, iom0, iom1, iom2, iom3) \
{ \
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .type = iom0, .offset = -1 }, \
{ .type = iom1, .offset = -1 }, \
{ .type = iom2, .offset = -1 }, \
{ .type = iom3, .offset = -1 }, \
}, \
}
#define PIN_BANK_DRV_FLAGS(id, pins, label, type0, type1, type2, type3) \
{ \
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .offset = -1 }, \
{ .offset = -1 }, \
{ .offset = -1 }, \
{ .offset = -1 }, \
}, \
.drv = { \
{ .drv_type = type0, .offset = -1 }, \
{ .drv_type = type1, .offset = -1 }, \
{ .drv_type = type2, .offset = -1 }, \
{ .drv_type = type3, .offset = -1 }, \
}, \
}
#define PIN_BANK_IOMUX_FLAGS_PULL_FLAGS(id, pins, label, iom0, iom1, \
iom2, iom3, pull0, pull1, \
pull2, pull3) \
{ \
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .type = iom0, .offset = -1 }, \
{ .type = iom1, .offset = -1 }, \
{ .type = iom2, .offset = -1 }, \
{ .type = iom3, .offset = -1 }, \
}, \
.pull_type[0] = pull0, \
.pull_type[1] = pull1, \
.pull_type[2] = pull2, \
.pull_type[3] = pull3, \
}
#define PIN_BANK_DRV_FLAGS_PULL_FLAGS(id, pins, label, drv0, drv1, \
drv2, drv3, pull0, pull1, \
pull2, pull3) \
{ \
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .offset = -1 }, \
{ .offset = -1 }, \
{ .offset = -1 }, \
{ .offset = -1 }, \
}, \
.drv = { \
{ .drv_type = drv0, .offset = -1 }, \
{ .drv_type = drv1, .offset = -1 }, \
{ .drv_type = drv2, .offset = -1 }, \
{ .drv_type = drv3, .offset = -1 }, \
}, \
.pull_type[0] = pull0, \
.pull_type[1] = pull1, \
.pull_type[2] = pull2, \
.pull_type[3] = pull3, \
}
#define PIN_BANK_IOMUX_FLAGS_OFFSET(id, pins, label, iom0, iom1, iom2, \
iom3, offset0, offset1, offset2, \
offset3) \
{ \
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .type = iom0, .offset = offset0 }, \
{ .type = iom1, .offset = offset1 }, \
{ .type = iom2, .offset = offset2 }, \
{ .type = iom3, .offset = offset3 }, \
}, \
}
#define PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(id, pins, label, iom0, iom1, \
iom2, iom3, drv0, drv1, drv2, \
drv3, offset0, offset1, \
offset2, offset3) \
{ \
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .type = iom0, .offset = -1 }, \
{ .type = iom1, .offset = -1 }, \
{ .type = iom2, .offset = -1 }, \
{ .type = iom3, .offset = -1 }, \
}, \
.drv = { \
{ .drv_type = drv0, .offset = offset0 }, \
{ .drv_type = drv1, .offset = offset1 }, \
{ .drv_type = drv2, .offset = offset2 }, \
{ .drv_type = drv3, .offset = offset3 }, \
}, \
}
#define PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(id, pins, \
label, iom0, iom1, iom2, \
iom3, drv0, drv1, drv2, \
drv3, offset0, offset1, \
offset2, offset3, pull0, \
pull1, pull2, pull3) \
{ \
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .type = iom0, .offset = -1 }, \
{ .type = iom1, .offset = -1 }, \
{ .type = iom2, .offset = -1 }, \
{ .type = iom3, .offset = -1 }, \
}, \
.drv = { \
{ .drv_type = drv0, .offset = offset0 }, \
{ .drv_type = drv1, .offset = offset1 }, \
{ .drv_type = drv2, .offset = offset2 }, \
{ .drv_type = drv3, .offset = offset3 }, \
}, \
.pull_type[0] = pull0, \
.pull_type[1] = pull1, \
.pull_type[2] = pull2, \
.pull_type[3] = pull3, \
}
#define PIN_BANK_MUX_ROUTE_FLAGS(ID, PIN, FUNC, REG, VAL, FLAG) \
{ \
.bank_num = ID, \
.pin = PIN, \
.func = FUNC, \
.route_offset = REG, \
.route_val = VAL, \
.route_location = FLAG, \
}
#define RK_MUXROUTE_SAME(ID, PIN, FUNC, REG, VAL) \
PIN_BANK_MUX_ROUTE_FLAGS(ID, PIN, FUNC, REG, VAL, ROCKCHIP_ROUTE_SAME)
#define RK_MUXROUTE_GRF(ID, PIN, FUNC, REG, VAL) \
PIN_BANK_MUX_ROUTE_FLAGS(ID, PIN, FUNC, REG, VAL, ROCKCHIP_ROUTE_GRF)
#define RK_MUXROUTE_PMU(ID, PIN, FUNC, REG, VAL) \
PIN_BANK_MUX_ROUTE_FLAGS(ID, PIN, FUNC, REG, VAL, ROCKCHIP_ROUTE_PMU)
#define RK3588_PIN_BANK_FLAGS(ID, PIN, LABEL, M, P) \
PIN_BANK_IOMUX_FLAGS_PULL_FLAGS(ID, PIN, LABEL, M, M, M, M, P, P, P, P)
static struct regmap_config rockchip_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
static inline const struct rockchip_pin_group *pinctrl_name_to_group(
const struct rockchip_pinctrl *info,
const char *name)
{
int i;
for (i = 0; i < info->ngroups; i++) {
if (!strcmp(info->groups[i].name, name))
return &info->groups[i];
}
return NULL;
}
/*
* given a pin number that is local to a pin controller, find out the pin bank
* and the register base of the pin bank.
*/
static struct rockchip_pin_bank *pin_to_bank(struct rockchip_pinctrl *info,
unsigned pin)
{
struct rockchip_pin_bank *b = info->ctrl->pin_banks;
while (pin >= (b->pin_base + b->nr_pins))
b++;
return b;
}
static struct rockchip_pin_bank *bank_num_to_bank(
struct rockchip_pinctrl *info,
unsigned num)
{
struct rockchip_pin_bank *b = info->ctrl->pin_banks;
int i;
for (i = 0; i < info->ctrl->nr_banks; i++, b++) {
if (b->bank_num == num)
return b;
}
return ERR_PTR(-EINVAL);
}
/*
* Pinctrl_ops handling
*/
static int rockchip_get_groups_count(struct pinctrl_dev *pctldev)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
return info->ngroups;
}
static const char *rockchip_get_group_name(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
return info->groups[selector].name;
}
static int rockchip_get_group_pins(struct pinctrl_dev *pctldev,
unsigned selector, const unsigned **pins,
unsigned *npins)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
if (selector >= info->ngroups)
return -EINVAL;
*pins = info->groups[selector].pins;
*npins = info->groups[selector].npins;
return 0;
}
static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np,
struct pinctrl_map **map, unsigned *num_maps)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
const struct rockchip_pin_group *grp;
struct device *dev = info->dev;
struct pinctrl_map *new_map;
struct device_node *parent;
int map_num = 1;
int i;
/*
* first find the group of this node and check if we need to create
* config maps for pins
*/
grp = pinctrl_name_to_group(info, np->name);
if (!grp) {
dev_err(dev, "unable to find group for node %pOFn\n", np);
return -EINVAL;
}
map_num += grp->npins;
new_map = kcalloc(map_num, sizeof(*new_map), GFP_KERNEL);
if (!new_map)
return -ENOMEM;
*map = new_map;
*num_maps = map_num;
/* create mux map */
parent = of_get_parent(np);
if (!parent) {
kfree(new_map);
return -EINVAL;
}
new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
new_map[0].data.mux.function = parent->name;
new_map[0].data.mux.group = np->name;
of_node_put(parent);
/* create config map */
new_map++;
for (i = 0; i < grp->npins; i++) {
new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
new_map[i].data.configs.group_or_pin =
pin_get_name(pctldev, grp->pins[i]);
new_map[i].data.configs.configs = grp->data[i].configs;
new_map[i].data.configs.num_configs = grp->data[i].nconfigs;
}
dev_dbg(dev, "maps: function %s group %s num %d\n",
(*map)->data.mux.function, (*map)->data.mux.group, map_num);
return 0;
}
static void rockchip_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned num_maps)
{
kfree(map);
}
static const struct pinctrl_ops rockchip_pctrl_ops = {
.get_groups_count = rockchip_get_groups_count,
.get_group_name = rockchip_get_group_name,
.get_group_pins = rockchip_get_group_pins,
.dt_node_to_map = rockchip_dt_node_to_map,
.dt_free_map = rockchip_dt_free_map,
};
/*
* Hardware access
*/
static struct rockchip_mux_recalced_data rv1108_mux_recalced_data[] = {
{
.num = 1,
.pin = 0,
.reg = 0x418,
.bit = 0,
.mask = 0x3
}, {
.num = 1,
.pin = 1,
.reg = 0x418,
.bit = 2,
.mask = 0x3
}, {
.num = 1,
.pin = 2,
.reg = 0x418,
.bit = 4,
.mask = 0x3
}, {
.num = 1,
.pin = 3,
.reg = 0x418,
.bit = 6,
.mask = 0x3
}, {
.num = 1,
.pin = 4,
.reg = 0x418,
.bit = 8,
.mask = 0x3
}, {
.num = 1,
.pin = 5,
.reg = 0x418,
.bit = 10,
.mask = 0x3
}, {
.num = 1,
.pin = 6,
.reg = 0x418,
.bit = 12,
.mask = 0x3
}, {
.num = 1,
.pin = 7,
.reg = 0x418,
.bit = 14,
.mask = 0x3
}, {
.num = 1,
.pin = 8,
.reg = 0x41c,
.bit = 0,
.mask = 0x3
}, {
.num = 1,
.pin = 9,
.reg = 0x41c,
.bit = 2,
.mask = 0x3
},
};
static struct rockchip_mux_recalced_data rv1126_mux_recalced_data[] = {
{
.num = 0,
.pin = 20,
.reg = 0x10000,
.bit = 0,
.mask = 0xf
},
{
.num = 0,
.pin = 21,
.reg = 0x10000,
.bit = 4,
.mask = 0xf
},
{
.num = 0,
.pin = 22,
.reg = 0x10000,
.bit = 8,
.mask = 0xf
},
{
.num = 0,
.pin = 23,
.reg = 0x10000,
.bit = 12,
.mask = 0xf
},
};
static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = {
{
.num = 2,
.pin = 20,
.reg = 0xe8,
.bit = 0,
.mask = 0x7
}, {
.num = 2,
.pin = 21,
.reg = 0xe8,
.bit = 4,
.mask = 0x7
}, {
.num = 2,
.pin = 22,
.reg = 0xe8,
.bit = 8,
.mask = 0x7
}, {
.num = 2,
.pin = 23,
.reg = 0xe8,
.bit = 12,
.mask = 0x7
}, {
.num = 2,
.pin = 24,
.reg = 0xd4,
.bit = 12,
.mask = 0x7
},
};
static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = {
{
/* gpio1b6_sel */
.num = 1,
.pin = 14,
.reg = 0x28,
.bit = 12,
.mask = 0xf
}, {
/* gpio1b7_sel */
.num = 1,
.pin = 15,
.reg = 0x2c,
.bit = 0,
.mask = 0x3
}, {
/* gpio1c2_sel */
.num = 1,
.pin = 18,
.reg = 0x30,
.bit = 4,
.mask = 0xf
}, {
/* gpio1c3_sel */
.num = 1,
.pin = 19,
.reg = 0x30,
.bit = 8,
.mask = 0xf
}, {
/* gpio1c4_sel */
.num = 1,
.pin = 20,
.reg = 0x30,
.bit = 12,
.mask = 0xf
}, {
/* gpio1c5_sel */
.num = 1,
.pin = 21,
.reg = 0x34,
.bit = 0,
.mask = 0xf
}, {
/* gpio1c6_sel */
.num = 1,
.pin = 22,
.reg = 0x34,
.bit = 4,
.mask = 0xf
}, {
/* gpio1c7_sel */
.num = 1,
.pin = 23,
.reg = 0x34,
.bit = 8,
.mask = 0xf
}, {
/* gpio2a2_sel */
.num = 2,
.pin = 2,
.reg = 0x40,
.bit = 4,
.mask = 0x3
}, {
/* gpio2a3_sel */
.num = 2,
.pin = 3,
.reg = 0x40,
.bit = 6,
.mask = 0x3
}, {
/* gpio2c0_sel */
.num = 2,
.pin = 16,
.reg = 0x50,
.bit = 0,
.mask = 0x3
}, {
/* gpio3b2_sel */
.num = 3,
.pin = 10,
.reg = 0x68,
.bit = 4,
.mask = 0x3
}, {
/* gpio3b3_sel */
.num = 3,
.pin = 11,
.reg = 0x68,
.bit = 6,
.mask = 0x3
}, {
/* gpio3b4_sel */
.num = 3,
.pin = 12,
.reg = 0x68,
.bit = 8,
.mask = 0xf
}, {
/* gpio3b5_sel */
.num = 3,
.pin = 13,
.reg = 0x68,
.bit = 12,
.mask = 0xf
},
};
static struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] = {
{
.num = 2,
.pin = 12,
.reg = 0x24,
.bit = 8,
.mask = 0x3
}, {
.num = 2,
.pin = 15,
.reg = 0x28,
.bit = 0,
.mask = 0x7
}, {
.num = 2,
.pin = 23,
.reg = 0x30,
.bit = 14,
.mask = 0x3
},
};
static void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin,
int *reg, u8 *bit, int *mask)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct rockchip_mux_recalced_data *data;
int i;
for (i = 0; i < ctrl->niomux_recalced; i++) {
data = &ctrl->iomux_recalced[i];
if (data->num == bank->bank_num &&
data->pin == pin)
break;
}
if (i >= ctrl->niomux_recalced)
return;
*reg = data->reg;
*mask = data->mask;
*bit = data->bit;
}
static struct rockchip_mux_route_data px30_mux_route_data[] = {
RK_MUXROUTE_SAME(2, RK_PB4, 1, 0x184, BIT(16 + 7)), /* cif-d0m0 */
RK_MUXROUTE_SAME(3, RK_PA1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d0m1 */
RK_MUXROUTE_SAME(2, RK_PB6, 1, 0x184, BIT(16 + 7)), /* cif-d1m0 */
RK_MUXROUTE_SAME(3, RK_PA2, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d1m1 */
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(2, RK_PA0, 1, 0x184, BIT(16 + 7)), /* cif-d2m0 */
RK_MUXROUTE_SAME(3, RK_PA3, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d2m1 */
RK_MUXROUTE_SAME(2, RK_PA1, 1, 0x184, BIT(16 + 7)), /* cif-d3m0 */
RK_MUXROUTE_SAME(3, RK_PA5, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d3m1 */
RK_MUXROUTE_SAME(2, RK_PA2, 1, 0x184, BIT(16 + 7)), /* cif-d4m0 */
RK_MUXROUTE_SAME(3, RK_PA7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d4m1 */
RK_MUXROUTE_SAME(2, RK_PA3, 1, 0x184, BIT(16 + 7)), /* cif-d5m0 */
RK_MUXROUTE_SAME(3, RK_PB0, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d5m1 */
RK_MUXROUTE_SAME(2, RK_PA4, 1, 0x184, BIT(16 + 7)), /* cif-d6m0 */
RK_MUXROUTE_SAME(3, RK_PB1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d6m1 */
RK_MUXROUTE_SAME(2, RK_PA5, 1, 0x184, BIT(16 + 7)), /* cif-d7m0 */
RK_MUXROUTE_SAME(3, RK_PB4, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d7m1 */
RK_MUXROUTE_SAME(2, RK_PA6, 1, 0x184, BIT(16 + 7)), /* cif-d8m0 */
RK_MUXROUTE_SAME(3, RK_PB6, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d8m1 */
RK_MUXROUTE_SAME(2, RK_PA7, 1, 0x184, BIT(16 + 7)), /* cif-d9m0 */
RK_MUXROUTE_SAME(3, RK_PB7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d9m1 */
RK_MUXROUTE_SAME(2, RK_PB7, 1, 0x184, BIT(16 + 7)), /* cif-d10m0 */
RK_MUXROUTE_SAME(3, RK_PC6, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d10m1 */
RK_MUXROUTE_SAME(2, RK_PC0, 1, 0x184, BIT(16 + 7)), /* cif-d11m0 */
RK_MUXROUTE_SAME(3, RK_PC7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d11m1 */
RK_MUXROUTE_SAME(2, RK_PB0, 1, 0x184, BIT(16 + 7)), /* cif-vsyncm0 */
RK_MUXROUTE_SAME(3, RK_PD1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-vsyncm1 */
RK_MUXROUTE_SAME(2, RK_PB1, 1, 0x184, BIT(16 + 7)), /* cif-hrefm0 */
RK_MUXROUTE_SAME(3, RK_PD2, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-hrefm1 */
RK_MUXROUTE_SAME(2, RK_PB2, 1, 0x184, BIT(16 + 7)), /* cif-clkinm0 */
RK_MUXROUTE_SAME(3, RK_PD3, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-clkinm1 */
RK_MUXROUTE_SAME(2, RK_PB3, 1, 0x184, BIT(16 + 7)), /* cif-clkoutm0 */
RK_MUXROUTE_SAME(3, RK_PD0, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-clkoutm1 */
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(3, RK_PC6, 2, 0x184, BIT(16 + 8)), /* pdm-m0 */
RK_MUXROUTE_SAME(2, RK_PC6, 1, 0x184, BIT(16 + 8) | BIT(8)), /* pdm-m1 */
RK_MUXROUTE_SAME(3, RK_PD3, 2, 0x184, BIT(16 + 8)), /* pdm-sdi0m0 */
RK_MUXROUTE_SAME(2, RK_PC5, 2, 0x184, BIT(16 + 8) | BIT(8)), /* pdm-sdi0m1 */
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(1, RK_PD3, 2, 0x184, BIT(16 + 10)), /* uart2-rxm0 */
RK_MUXROUTE_SAME(2, RK_PB6, 2, 0x184, BIT(16 + 10) | BIT(10)), /* uart2-rxm1 */
RK_MUXROUTE_SAME(1, RK_PD2, 2, 0x184, BIT(16 + 10)), /* uart2-txm0 */
RK_MUXROUTE_SAME(2, RK_PB4, 2, 0x184, BIT(16 + 10) | BIT(10)), /* uart2-txm1 */
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(0, RK_PC1, 2, 0x184, BIT(16 + 9)), /* uart3-rxm0 */
RK_MUXROUTE_SAME(1, RK_PB7, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-rxm1 */
RK_MUXROUTE_SAME(0, RK_PC0, 2, 0x184, BIT(16 + 9)), /* uart3-txm0 */
RK_MUXROUTE_SAME(1, RK_PB6, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-txm1 */
RK_MUXROUTE_SAME(0, RK_PC2, 2, 0x184, BIT(16 + 9)), /* uart3-ctsm0 */
RK_MUXROUTE_SAME(1, RK_PB4, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-ctsm1 */
RK_MUXROUTE_SAME(0, RK_PC3, 2, 0x184, BIT(16 + 9)), /* uart3-rtsm0 */
RK_MUXROUTE_SAME(1, RK_PB5, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-rtsm1 */
};
static struct rockchip_mux_route_data rv1126_mux_route_data[] = {
RK_MUXROUTE_GRF(3, RK_PD2, 1, 0x10260, WRITE_MASK_VAL(0, 0, 0)), /* I2S0_MCLK_M0 */
RK_MUXROUTE_GRF(3, RK_PB0, 3, 0x10260, WRITE_MASK_VAL(0, 0, 1)), /* I2S0_MCLK_M1 */
RK_MUXROUTE_GRF(0, RK_PD4, 4, 0x10260, WRITE_MASK_VAL(3, 2, 0)), /* I2S1_MCLK_M0 */
RK_MUXROUTE_GRF(1, RK_PD5, 2, 0x10260, WRITE_MASK_VAL(3, 2, 1)), /* I2S1_MCLK_M1 */
RK_MUXROUTE_GRF(2, RK_PC7, 6, 0x10260, WRITE_MASK_VAL(3, 2, 2)), /* I2S1_MCLK_M2 */
RK_MUXROUTE_GRF(1, RK_PD0, 1, 0x10260, WRITE_MASK_VAL(4, 4, 0)), /* I2S2_MCLK_M0 */
RK_MUXROUTE_GRF(2, RK_PB3, 2, 0x10260, WRITE_MASK_VAL(4, 4, 1)), /* I2S2_MCLK_M1 */
RK_MUXROUTE_GRF(3, RK_PD4, 2, 0x10260, WRITE_MASK_VAL(12, 12, 0)), /* PDM_CLK0_M0 */
RK_MUXROUTE_GRF(3, RK_PC0, 3, 0x10260, WRITE_MASK_VAL(12, 12, 1)), /* PDM_CLK0_M1 */
RK_MUXROUTE_GRF(3, RK_PC6, 1, 0x10264, WRITE_MASK_VAL(0, 0, 0)), /* CIF_CLKOUT_M0 */
RK_MUXROUTE_GRF(2, RK_PD1, 3, 0x10264, WRITE_MASK_VAL(0, 0, 1)), /* CIF_CLKOUT_M1 */
RK_MUXROUTE_GRF(3, RK_PA4, 5, 0x10264, WRITE_MASK_VAL(5, 4, 0)), /* I2C3_SCL_M0 */
RK_MUXROUTE_GRF(2, RK_PD4, 7, 0x10264, WRITE_MASK_VAL(5, 4, 1)), /* I2C3_SCL_M1 */
RK_MUXROUTE_GRF(1, RK_PD6, 3, 0x10264, WRITE_MASK_VAL(5, 4, 2)), /* I2C3_SCL_M2 */
RK_MUXROUTE_GRF(3, RK_PA0, 7, 0x10264, WRITE_MASK_VAL(6, 6, 0)), /* I2C4_SCL_M0 */
RK_MUXROUTE_GRF(4, RK_PA0, 4, 0x10264, WRITE_MASK_VAL(6, 6, 1)), /* I2C4_SCL_M1 */
RK_MUXROUTE_GRF(2, RK_PA5, 7, 0x10264, WRITE_MASK_VAL(9, 8, 0)), /* I2C5_SCL_M0 */
RK_MUXROUTE_GRF(3, RK_PB0, 5, 0x10264, WRITE_MASK_VAL(9, 8, 1)), /* I2C5_SCL_M1 */
RK_MUXROUTE_GRF(1, RK_PD0, 4, 0x10264, WRITE_MASK_VAL(9, 8, 2)), /* I2C5_SCL_M2 */
RK_MUXROUTE_GRF(3, RK_PC0, 5, 0x10264, WRITE_MASK_VAL(11, 10, 0)), /* SPI1_CLK_M0 */
RK_MUXROUTE_GRF(1, RK_PC6, 3, 0x10264, WRITE_MASK_VAL(11, 10, 1)), /* SPI1_CLK_M1 */
RK_MUXROUTE_GRF(2, RK_PD5, 6, 0x10264, WRITE_MASK_VAL(11, 10, 2)), /* SPI1_CLK_M2 */
RK_MUXROUTE_GRF(3, RK_PC0, 2, 0x10264, WRITE_MASK_VAL(12, 12, 0)), /* RGMII_CLK_M0 */
RK_MUXROUTE_GRF(2, RK_PB7, 2, 0x10264, WRITE_MASK_VAL(12, 12, 1)), /* RGMII_CLK_M1 */
RK_MUXROUTE_GRF(3, RK_PA1, 3, 0x10264, WRITE_MASK_VAL(13, 13, 0)), /* CAN_TXD_M0 */
RK_MUXROUTE_GRF(3, RK_PA7, 5, 0x10264, WRITE_MASK_VAL(13, 13, 1)), /* CAN_TXD_M1 */
RK_MUXROUTE_GRF(3, RK_PA4, 6, 0x10268, WRITE_MASK_VAL(0, 0, 0)), /* PWM8_M0 */
RK_MUXROUTE_GRF(2, RK_PD7, 5, 0x10268, WRITE_MASK_VAL(0, 0, 1)), /* PWM8_M1 */
RK_MUXROUTE_GRF(3, RK_PA5, 6, 0x10268, WRITE_MASK_VAL(2, 2, 0)), /* PWM9_M0 */
RK_MUXROUTE_GRF(2, RK_PD6, 5, 0x10268, WRITE_MASK_VAL(2, 2, 1)), /* PWM9_M1 */
RK_MUXROUTE_GRF(3, RK_PA6, 6, 0x10268, WRITE_MASK_VAL(4, 4, 0)), /* PWM10_M0 */
RK_MUXROUTE_GRF(2, RK_PD5, 5, 0x10268, WRITE_MASK_VAL(4, 4, 1)), /* PWM10_M1 */
RK_MUXROUTE_GRF(3, RK_PA7, 6, 0x10268, WRITE_MASK_VAL(6, 6, 0)), /* PWM11_IR_M0 */
RK_MUXROUTE_GRF(3, RK_PA1, 5, 0x10268, WRITE_MASK_VAL(6, 6, 1)), /* PWM11_IR_M1 */
RK_MUXROUTE_GRF(1, RK_PA5, 3, 0x10268, WRITE_MASK_VAL(8, 8, 0)), /* UART2_TX_M0 */
RK_MUXROUTE_GRF(3, RK_PA2, 1, 0x10268, WRITE_MASK_VAL(8, 8, 1)), /* UART2_TX_M1 */
RK_MUXROUTE_GRF(3, RK_PC6, 3, 0x10268, WRITE_MASK_VAL(11, 10, 0)), /* UART3_TX_M0 */
RK_MUXROUTE_GRF(1, RK_PA7, 2, 0x10268, WRITE_MASK_VAL(11, 10, 1)), /* UART3_TX_M1 */
RK_MUXROUTE_GRF(3, RK_PA0, 4, 0x10268, WRITE_MASK_VAL(11, 10, 2)), /* UART3_TX_M2 */
RK_MUXROUTE_GRF(3, RK_PA4, 4, 0x10268, WRITE_MASK_VAL(13, 12, 0)), /* UART4_TX_M0 */
RK_MUXROUTE_GRF(2, RK_PA6, 4, 0x10268, WRITE_MASK_VAL(13, 12, 1)), /* UART4_TX_M1 */
RK_MUXROUTE_GRF(1, RK_PD5, 3, 0x10268, WRITE_MASK_VAL(13, 12, 2)), /* UART4_TX_M2 */
RK_MUXROUTE_GRF(3, RK_PA6, 4, 0x10268, WRITE_MASK_VAL(15, 14, 0)), /* UART5_TX_M0 */
RK_MUXROUTE_GRF(2, RK_PB0, 4, 0x10268, WRITE_MASK_VAL(15, 14, 1)), /* UART5_TX_M1 */
RK_MUXROUTE_GRF(2, RK_PA0, 3, 0x10268, WRITE_MASK_VAL(15, 14, 2)), /* UART5_TX_M2 */
RK_MUXROUTE_PMU(0, RK_PB6, 3, 0x0114, WRITE_MASK_VAL(0, 0, 0)), /* PWM0_M0 */
RK_MUXROUTE_PMU(2, RK_PB3, 5, 0x0114, WRITE_MASK_VAL(0, 0, 1)), /* PWM0_M1 */
RK_MUXROUTE_PMU(0, RK_PB7, 3, 0x0114, WRITE_MASK_VAL(2, 2, 0)), /* PWM1_M0 */
RK_MUXROUTE_PMU(2, RK_PB2, 5, 0x0114, WRITE_MASK_VAL(2, 2, 1)), /* PWM1_M1 */
RK_MUXROUTE_PMU(0, RK_PC0, 3, 0x0114, WRITE_MASK_VAL(4, 4, 0)), /* PWM2_M0 */
RK_MUXROUTE_PMU(2, RK_PB1, 5, 0x0114, WRITE_MASK_VAL(4, 4, 1)), /* PWM2_M1 */
RK_MUXROUTE_PMU(0, RK_PC1, 3, 0x0114, WRITE_MASK_VAL(6, 6, 0)), /* PWM3_IR_M0 */
RK_MUXROUTE_PMU(2, RK_PB0, 5, 0x0114, WRITE_MASK_VAL(6, 6, 1)), /* PWM3_IR_M1 */
RK_MUXROUTE_PMU(0, RK_PC2, 3, 0x0114, WRITE_MASK_VAL(8, 8, 0)), /* PWM4_M0 */
RK_MUXROUTE_PMU(2, RK_PA7, 5, 0x0114, WRITE_MASK_VAL(8, 8, 1)), /* PWM4_M1 */
RK_MUXROUTE_PMU(0, RK_PC3, 3, 0x0114, WRITE_MASK_VAL(10, 10, 0)), /* PWM5_M0 */
RK_MUXROUTE_PMU(2, RK_PA6, 5, 0x0114, WRITE_MASK_VAL(10, 10, 1)), /* PWM5_M1 */
RK_MUXROUTE_PMU(0, RK_PB2, 3, 0x0114, WRITE_MASK_VAL(12, 12, 0)), /* PWM6_M0 */
RK_MUXROUTE_PMU(2, RK_PD4, 5, 0x0114, WRITE_MASK_VAL(12, 12, 1)), /* PWM6_M1 */
RK_MUXROUTE_PMU(0, RK_PB1, 3, 0x0114, WRITE_MASK_VAL(14, 14, 0)), /* PWM7_IR_M0 */
RK_MUXROUTE_PMU(3, RK_PA0, 5, 0x0114, WRITE_MASK_VAL(14, 14, 1)), /* PWM7_IR_M1 */
RK_MUXROUTE_PMU(0, RK_PB0, 1, 0x0118, WRITE_MASK_VAL(1, 0, 0)), /* SPI0_CLK_M0 */
RK_MUXROUTE_PMU(2, RK_PA1, 1, 0x0118, WRITE_MASK_VAL(1, 0, 1)), /* SPI0_CLK_M1 */
RK_MUXROUTE_PMU(2, RK_PB2, 6, 0x0118, WRITE_MASK_VAL(1, 0, 2)), /* SPI0_CLK_M2 */
RK_MUXROUTE_PMU(0, RK_PB6, 2, 0x0118, WRITE_MASK_VAL(2, 2, 0)), /* UART1_TX_M0 */
RK_MUXROUTE_PMU(1, RK_PD0, 5, 0x0118, WRITE_MASK_VAL(2, 2, 1)), /* UART1_TX_M1 */
};
static struct rockchip_mux_route_data rk3128_mux_route_data[] = {
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(1, RK_PB2, 1, 0x144, BIT(16 + 3) | BIT(16 + 4)), /* spi-0 */
RK_MUXROUTE_SAME(1, RK_PD3, 3, 0x144, BIT(16 + 3) | BIT(16 + 4) | BIT(3)), /* spi-1 */
RK_MUXROUTE_SAME(0, RK_PB5, 2, 0x144, BIT(16 + 3) | BIT(16 + 4) | BIT(4)), /* spi-2 */
RK_MUXROUTE_SAME(1, RK_PA5, 1, 0x144, BIT(16 + 5)), /* i2s-0 */
RK_MUXROUTE_SAME(0, RK_PB6, 1, 0x144, BIT(16 + 5) | BIT(5)), /* i2s-1 */
RK_MUXROUTE_SAME(1, RK_PC6, 2, 0x144, BIT(16 + 6)), /* emmc-0 */
RK_MUXROUTE_SAME(2, RK_PA4, 2, 0x144, BIT(16 + 6) | BIT(6)), /* emmc-1 */
};
static struct rockchip_mux_route_data rk3188_mux_route_data[] = {
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(0, RK_PD0, 1, 0xa0, BIT(16 + 11)), /* non-iomuxed emmc/flash pins on flash-dqs */
RK_MUXROUTE_SAME(0, RK_PD0, 2, 0xa0, BIT(16 + 11) | BIT(11)), /* non-iomuxed emmc/flash pins on emmc-clk */
};
static struct rockchip_mux_route_data rk3228_mux_route_data[] = {
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(0, RK_PD2, 1, 0x50, BIT(16)), /* pwm0-0 */
RK_MUXROUTE_SAME(3, RK_PC5, 1, 0x50, BIT(16) | BIT(0)), /* pwm0-1 */
RK_MUXROUTE_SAME(0, RK_PD3, 1, 0x50, BIT(16 + 1)), /* pwm1-0 */
RK_MUXROUTE_SAME(0, RK_PD6, 2, 0x50, BIT(16 + 1) | BIT(1)), /* pwm1-1 */
RK_MUXROUTE_SAME(0, RK_PD4, 1, 0x50, BIT(16 + 2)), /* pwm2-0 */
RK_MUXROUTE_SAME(1, RK_PB4, 2, 0x50, BIT(16 + 2) | BIT(2)), /* pwm2-1 */
RK_MUXROUTE_SAME(3, RK_PD2, 1, 0x50, BIT(16 + 3)), /* pwm3-0 */
RK_MUXROUTE_SAME(1, RK_PB3, 2, 0x50, BIT(16 + 3) | BIT(3)), /* pwm3-1 */
RK_MUXROUTE_SAME(1, RK_PA1, 1, 0x50, BIT(16 + 4)), /* sdio-0_d0 */
RK_MUXROUTE_SAME(3, RK_PA2, 1, 0x50, BIT(16 + 4) | BIT(4)), /* sdio-1_d0 */
RK_MUXROUTE_SAME(0, RK_PB5, 2, 0x50, BIT(16 + 5)), /* spi-0_rx */
RK_MUXROUTE_SAME(2, RK_PA0, 2, 0x50, BIT(16 + 5) | BIT(5)), /* spi-1_rx */
RK_MUXROUTE_SAME(1, RK_PC6, 2, 0x50, BIT(16 + 7)), /* emmc-0_cmd */
RK_MUXROUTE_SAME(2, RK_PA4, 2, 0x50, BIT(16 + 7) | BIT(7)), /* emmc-1_cmd */
RK_MUXROUTE_SAME(1, RK_PC3, 2, 0x50, BIT(16 + 8)), /* uart2-0_rx */
RK_MUXROUTE_SAME(1, RK_PB2, 2, 0x50, BIT(16 + 8) | BIT(8)), /* uart2-1_rx */
RK_MUXROUTE_SAME(1, RK_PB2, 1, 0x50, BIT(16 + 11)), /* uart1-0_rx */
RK_MUXROUTE_SAME(3, RK_PB5, 1, 0x50, BIT(16 + 11) | BIT(11)), /* uart1-1_rx */
};
static struct rockchip_mux_route_data rk3288_mux_route_data[] = {
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(7, RK_PC0, 2, 0x264, BIT(16 + 12) | BIT(12)), /* edphdmi_cecinoutt1 */
RK_MUXROUTE_SAME(7, RK_PC7, 4, 0x264, BIT(16 + 12)), /* edphdmi_cecinout */
};
static struct rockchip_mux_route_data rk3308_mux_route_data[] = {
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(0, RK_PC3, 1, 0x314, BIT(16 + 0) | BIT(0)), /* rtc_clk */
RK_MUXROUTE_SAME(1, RK_PC6, 2, 0x314, BIT(16 + 2) | BIT(16 + 3)), /* uart2_rxm0 */
RK_MUXROUTE_SAME(4, RK_PD2, 2, 0x314, BIT(16 + 2) | BIT(16 + 3) | BIT(2)), /* uart2_rxm1 */
RK_MUXROUTE_SAME(0, RK_PB7, 2, 0x608, BIT(16 + 8) | BIT(16 + 9)), /* i2c3_sdam0 */
RK_MUXROUTE_SAME(3, RK_PB4, 2, 0x608, BIT(16 + 8) | BIT(16 + 9) | BIT(8)), /* i2c3_sdam1 */
RK_MUXROUTE_SAME(2, RK_PA0, 3, 0x608, BIT(16 + 8) | BIT(16 + 9) | BIT(9)), /* i2c3_sdam2 */
RK_MUXROUTE_SAME(1, RK_PA3, 2, 0x308, BIT(16 + 3)), /* i2s-8ch-1-sclktxm0 */
RK_MUXROUTE_SAME(1, RK_PA4, 2, 0x308, BIT(16 + 3)), /* i2s-8ch-1-sclkrxm0 */
RK_MUXROUTE_SAME(1, RK_PB5, 2, 0x308, BIT(16 + 3) | BIT(3)), /* i2s-8ch-1-sclktxm1 */
RK_MUXROUTE_SAME(1, RK_PB6, 2, 0x308, BIT(16 + 3) | BIT(3)), /* i2s-8ch-1-sclkrxm1 */
RK_MUXROUTE_SAME(1, RK_PA4, 3, 0x308, BIT(16 + 12) | BIT(16 + 13)), /* pdm-clkm0 */
RK_MUXROUTE_SAME(1, RK_PB6, 4, 0x308, BIT(16 + 12) | BIT(16 + 13) | BIT(12)), /* pdm-clkm1 */
RK_MUXROUTE_SAME(2, RK_PA6, 2, 0x308, BIT(16 + 12) | BIT(16 + 13) | BIT(13)), /* pdm-clkm2 */
RK_MUXROUTE_SAME(2, RK_PA4, 3, 0x600, BIT(16 + 2) | BIT(2)), /* pdm-clkm-m2 */
RK_MUXROUTE_SAME(3, RK_PB2, 3, 0x314, BIT(16 + 9)), /* spi1_miso */
RK_MUXROUTE_SAME(2, RK_PA4, 2, 0x314, BIT(16 + 9) | BIT(9)), /* spi1_miso_m1 */
RK_MUXROUTE_SAME(0, RK_PB3, 3, 0x314, BIT(16 + 10) | BIT(16 + 11)), /* owire_m0 */
RK_MUXROUTE_SAME(1, RK_PC6, 7, 0x314, BIT(16 + 10) | BIT(16 + 11) | BIT(10)), /* owire_m1 */
RK_MUXROUTE_SAME(2, RK_PA2, 5, 0x314, BIT(16 + 10) | BIT(16 + 11) | BIT(11)), /* owire_m2 */
RK_MUXROUTE_SAME(0, RK_PB3, 2, 0x314, BIT(16 + 12) | BIT(16 + 13)), /* can_rxd_m0 */
RK_MUXROUTE_SAME(1, RK_PC6, 5, 0x314, BIT(16 + 12) | BIT(16 + 13) | BIT(12)), /* can_rxd_m1 */
RK_MUXROUTE_SAME(2, RK_PA2, 4, 0x314, BIT(16 + 12) | BIT(16 + 13) | BIT(13)), /* can_rxd_m2 */
RK_MUXROUTE_SAME(1, RK_PC4, 3, 0x314, BIT(16 + 14)), /* mac_rxd0_m0 */
RK_MUXROUTE_SAME(4, RK_PA2, 2, 0x314, BIT(16 + 14) | BIT(14)), /* mac_rxd0_m1 */
RK_MUXROUTE_SAME(3, RK_PB4, 4, 0x314, BIT(16 + 15)), /* uart3_rx */
RK_MUXROUTE_SAME(0, RK_PC1, 3, 0x314, BIT(16 + 15) | BIT(15)), /* uart3_rx_m1 */
};
static struct rockchip_mux_route_data rk3328_mux_route_data[] = {
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(1, RK_PA1, 2, 0x50, BIT(16) | BIT(16 + 1)), /* uart2dbg_rxm0 */
RK_MUXROUTE_SAME(2, RK_PA1, 1, 0x50, BIT(16) | BIT(16 + 1) | BIT(0)), /* uart2dbg_rxm1 */
RK_MUXROUTE_SAME(1, RK_PB3, 2, 0x50, BIT(16 + 2) | BIT(2)), /* gmac-m1_rxd0 */
RK_MUXROUTE_SAME(1, RK_PB6, 2, 0x50, BIT(16 + 10) | BIT(10)), /* gmac-m1-optimized_rxd3 */
RK_MUXROUTE_SAME(2, RK_PC3, 2, 0x50, BIT(16 + 3)), /* pdm_sdi0m0 */
RK_MUXROUTE_SAME(1, RK_PC7, 3, 0x50, BIT(16 + 3) | BIT(3)), /* pdm_sdi0m1 */
RK_MUXROUTE_SAME(3, RK_PA2, 4, 0x50, BIT(16 + 4) | BIT(16 + 5) | BIT(5)), /* spi_rxdm2 */
RK_MUXROUTE_SAME(1, RK_PD0, 1, 0x50, BIT(16 + 6)), /* i2s2_sdim0 */
RK_MUXROUTE_SAME(3, RK_PA2, 6, 0x50, BIT(16 + 6) | BIT(6)), /* i2s2_sdim1 */
RK_MUXROUTE_SAME(2, RK_PC6, 3, 0x50, BIT(16 + 7) | BIT(7)), /* card_iom1 */
RK_MUXROUTE_SAME(2, RK_PC0, 3, 0x50, BIT(16 + 8) | BIT(8)), /* tsp_d5m1 */
RK_MUXROUTE_SAME(2, RK_PC0, 4, 0x50, BIT(16 + 9) | BIT(9)), /* cif_data5m1 */
};
static struct rockchip_mux_route_data rk3399_mux_route_data[] = {
pinctrl: rockchip: do coding style for mux route struct The mux route tables take many lines for each SoC, and it will be more instances for newly SoC, that makes the file size increase larger. This patch only do coding style for mux route struct, by adding a new definition and replace the structs by script which supplied by huangtao@rock-chips.com sed -i -e " /static struct rockchip_mux_route_data /bcheck b :append-next-line N :check /^[^;]*$/bappend-next-line s/[[:blank:]]*.bank_num = \([[:digit:]]*,\)\n/\tRK_MUXROUTE_SAME(\1/g s/[[:blank:]]*.pin =[[:blank:]]*0,\n/ RK_PA0,/g s/[[:blank:]]*.pin =[[:blank:]]*1,\n/ RK_PA1,/g s/[[:blank:]]*.pin =[[:blank:]]*2,\n/ RK_PA2,/g s/[[:blank:]]*.pin =[[:blank:]]*3,\n/ RK_PA3,/g s/[[:blank:]]*.pin =[[:blank:]]*4,\n/ RK_PA4,/g s/[[:blank:]]*.pin =[[:blank:]]*5,\n/ RK_PA5,/g s/[[:blank:]]*.pin =[[:blank:]]*6,\n/ RK_PA6,/g s/[[:blank:]]*.pin =[[:blank:]]*7,\n/ RK_PA7,/g s/[[:blank:]]*.pin =[[:blank:]]*8,\n/ RK_PB0,/g s/[[:blank:]]*.pin =[[:blank:]]*9,\n/ RK_PB1,/g s/[[:blank:]]*.pin =[[:blank:]]*10,\n/ RK_PB2,/g s/[[:blank:]]*.pin =[[:blank:]]*11,\n/ RK_PB3,/g s/[[:blank:]]*.pin =[[:blank:]]*12,\n/ RK_PB4,/g s/[[:blank:]]*.pin =[[:blank:]]*13,\n/ RK_PB5,/g s/[[:blank:]]*.pin =[[:blank:]]*14,\n/ RK_PB6,/g s/[[:blank:]]*.pin =[[:blank:]]*15,\n/ RK_PB7,/g s/[[:blank:]]*.pin =[[:blank:]]*16,\n/ RK_PC0,/g s/[[:blank:]]*.pin =[[:blank:]]*17,\n/ RK_PC1,/g s/[[:blank:]]*.pin =[[:blank:]]*18,\n/ RK_PC2,/g s/[[:blank:]]*.pin =[[:blank:]]*19,\n/ RK_PC3,/g s/[[:blank:]]*.pin =[[:blank:]]*20,\n/ RK_PC4,/g s/[[:blank:]]*.pin =[[:blank:]]*21,\n/ RK_PC5,/g s/[[:blank:]]*.pin =[[:blank:]]*22,\n/ RK_PC6,/g s/[[:blank:]]*.pin =[[:blank:]]*23,\n/ RK_PC7,/g s/[[:blank:]]*.pin =[[:blank:]]*24,\n/ RK_PD0,/g s/[[:blank:]]*.pin =[[:blank:]]*25,\n/ RK_PD1,/g s/[[:blank:]]*.pin =[[:blank:]]*26,\n/ RK_PD2,/g s/[[:blank:]]*.pin =[[:blank:]]*27,\n/ RK_PD3,/g s/[[:blank:]]*.pin =[[:blank:]]*28,\n/ RK_PD4,/g s/[[:blank:]]*.pin =[[:blank:]]*29,\n/ RK_PD5,/g s/[[:blank:]]*.pin =[[:blank:]]*30,\n/ RK_PD6,/g s/[[:blank:]]*.pin =[[:blank:]]*31,\n/ RK_PD7,/g s/[[:blank:]]*.func = \([[:digit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_location =[[:blank:]]*\([[:print:]]*,\)\n//g s/[[:blank:]]*.route_offset = \(0x[[:xdigit:]]*,\)\n/ \1/g s/[[:blank:]]*.route_val =[[:blank:]]*\([[:print:]]*\),\n/ \1),/g s/\t{\n//g s/\t}, {\n//g s/\t},//g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),\n/\tRK_MUXROUTE_SAME(\2), \1\n/g s/[[:blank:]]*\(\/\*[[:print:]]*\*\/\)\n[[:blank:]]*RK_MUXROUTE_SAME(\([[:print:]]*\)),/\tRK_MUXROUTE_SAME(\2), \1\n/g " drivers/pinctrl/pinctrl-rockchip.c Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210420091240.1246429-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-20 17:12:40 +08:00
RK_MUXROUTE_SAME(4, RK_PB0, 2, 0xe21c, BIT(16 + 10) | BIT(16 + 11)), /* uart2dbga_rx */
RK_MUXROUTE_SAME(4, RK_PC0, 2, 0xe21c, BIT(16 + 10) | BIT(16 + 11) | BIT(10)), /* uart2dbgb_rx */
RK_MUXROUTE_SAME(4, RK_PC3, 1, 0xe21c, BIT(16 + 10) | BIT(16 + 11) | BIT(11)), /* uart2dbgc_rx */
RK_MUXROUTE_SAME(2, RK_PD2, 2, 0xe21c, BIT(16 + 14)), /* pcie_clkreqn */
RK_MUXROUTE_SAME(4, RK_PD0, 1, 0xe21c, BIT(16 + 14) | BIT(14)), /* pcie_clkreqnb */
};
static struct rockchip_mux_route_data rk3568_mux_route_data[] = {
RK_MUXROUTE_PMU(0, RK_PB7, 1, 0x0110, WRITE_MASK_VAL(1, 0, 0)), /* PWM0 IO mux M0 */
RK_MUXROUTE_PMU(0, RK_PC7, 2, 0x0110, WRITE_MASK_VAL(1, 0, 1)), /* PWM0 IO mux M1 */
RK_MUXROUTE_PMU(0, RK_PC0, 1, 0x0110, WRITE_MASK_VAL(3, 2, 0)), /* PWM1 IO mux M0 */
RK_MUXROUTE_PMU(0, RK_PB5, 4, 0x0110, WRITE_MASK_VAL(3, 2, 1)), /* PWM1 IO mux M1 */
RK_MUXROUTE_PMU(0, RK_PC1, 1, 0x0110, WRITE_MASK_VAL(5, 4, 0)), /* PWM2 IO mux M0 */
RK_MUXROUTE_PMU(0, RK_PB6, 4, 0x0110, WRITE_MASK_VAL(5, 4, 1)), /* PWM2 IO mux M1 */
RK_MUXROUTE_PMU(0, RK_PB3, 2, 0x0300, WRITE_MASK_VAL(0, 0, 0)), /* CAN0 IO mux M0 */
RK_MUXROUTE_GRF(2, RK_PA1, 4, 0x0300, WRITE_MASK_VAL(0, 0, 1)), /* CAN0 IO mux M1 */
RK_MUXROUTE_GRF(1, RK_PA1, 3, 0x0300, WRITE_MASK_VAL(2, 2, 0)), /* CAN1 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PC3, 3, 0x0300, WRITE_MASK_VAL(2, 2, 1)), /* CAN1 IO mux M1 */
RK_MUXROUTE_GRF(4, RK_PB5, 3, 0x0300, WRITE_MASK_VAL(4, 4, 0)), /* CAN2 IO mux M0 */
RK_MUXROUTE_GRF(2, RK_PB2, 4, 0x0300, WRITE_MASK_VAL(4, 4, 1)), /* CAN2 IO mux M1 */
RK_MUXROUTE_GRF(4, RK_PC4, 1, 0x0300, WRITE_MASK_VAL(6, 6, 0)), /* HPDIN IO mux M0 */
RK_MUXROUTE_PMU(0, RK_PC2, 2, 0x0300, WRITE_MASK_VAL(6, 6, 1)), /* HPDIN IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PB1, 3, 0x0300, WRITE_MASK_VAL(8, 8, 0)), /* GMAC1 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PA7, 3, 0x0300, WRITE_MASK_VAL(8, 8, 1)), /* GMAC1 IO mux M1 */
RK_MUXROUTE_GRF(4, RK_PD1, 1, 0x0300, WRITE_MASK_VAL(10, 10, 0)), /* HDMITX IO mux M0 */
RK_MUXROUTE_PMU(0, RK_PC7, 1, 0x0300, WRITE_MASK_VAL(10, 10, 1)), /* HDMITX IO mux M1 */
RK_MUXROUTE_PMU(0, RK_PB6, 1, 0x0300, WRITE_MASK_VAL(14, 14, 0)), /* I2C2 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PB4, 1, 0x0300, WRITE_MASK_VAL(14, 14, 1)), /* I2C2 IO mux M1 */
RK_MUXROUTE_GRF(1, RK_PA0, 1, 0x0304, WRITE_MASK_VAL(0, 0, 0)), /* I2C3 IO mux M0 */
RK_MUXROUTE_GRF(3, RK_PB6, 4, 0x0304, WRITE_MASK_VAL(0, 0, 1)), /* I2C3 IO mux M1 */
RK_MUXROUTE_GRF(4, RK_PB2, 1, 0x0304, WRITE_MASK_VAL(2, 2, 0)), /* I2C4 IO mux M0 */
RK_MUXROUTE_GRF(2, RK_PB1, 2, 0x0304, WRITE_MASK_VAL(2, 2, 1)), /* I2C4 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PB4, 4, 0x0304, WRITE_MASK_VAL(4, 4, 0)), /* I2C5 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PD0, 2, 0x0304, WRITE_MASK_VAL(4, 4, 1)), /* I2C5 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PB1, 5, 0x0304, WRITE_MASK_VAL(14, 14, 0)), /* PWM8 IO mux M0 */
RK_MUXROUTE_GRF(1, RK_PD5, 4, 0x0304, WRITE_MASK_VAL(14, 14, 1)), /* PWM8 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PB2, 5, 0x0308, WRITE_MASK_VAL(0, 0, 0)), /* PWM9 IO mux M0 */
RK_MUXROUTE_GRF(1, RK_PD6, 4, 0x0308, WRITE_MASK_VAL(0, 0, 1)), /* PWM9 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PB5, 5, 0x0308, WRITE_MASK_VAL(2, 2, 0)), /* PWM10 IO mux M0 */
RK_MUXROUTE_GRF(2, RK_PA1, 2, 0x0308, WRITE_MASK_VAL(2, 2, 1)), /* PWM10 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PB6, 5, 0x0308, WRITE_MASK_VAL(4, 4, 0)), /* PWM11 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PC0, 3, 0x0308, WRITE_MASK_VAL(4, 4, 1)), /* PWM11 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PB7, 2, 0x0308, WRITE_MASK_VAL(6, 6, 0)), /* PWM12 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PC5, 1, 0x0308, WRITE_MASK_VAL(6, 6, 1)), /* PWM12 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PC0, 2, 0x0308, WRITE_MASK_VAL(8, 8, 0)), /* PWM13 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PC6, 1, 0x0308, WRITE_MASK_VAL(8, 8, 1)), /* PWM13 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PC4, 1, 0x0308, WRITE_MASK_VAL(10, 10, 0)), /* PWM14 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PC2, 1, 0x0308, WRITE_MASK_VAL(10, 10, 1)), /* PWM14 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PC5, 1, 0x0308, WRITE_MASK_VAL(12, 12, 0)), /* PWM15 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PC3, 1, 0x0308, WRITE_MASK_VAL(12, 12, 1)), /* PWM15 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PD2, 3, 0x0308, WRITE_MASK_VAL(14, 14, 0)), /* SDMMC2 IO mux M0 */
RK_MUXROUTE_GRF(3, RK_PA5, 5, 0x0308, WRITE_MASK_VAL(14, 14, 1)), /* SDMMC2 IO mux M1 */
RK_MUXROUTE_PMU(0, RK_PB5, 2, 0x030c, WRITE_MASK_VAL(0, 0, 0)), /* SPI0 IO mux M0 */
RK_MUXROUTE_GRF(2, RK_PD3, 3, 0x030c, WRITE_MASK_VAL(0, 0, 1)), /* SPI0 IO mux M1 */
RK_MUXROUTE_GRF(2, RK_PB5, 3, 0x030c, WRITE_MASK_VAL(2, 2, 0)), /* SPI1 IO mux M0 */
RK_MUXROUTE_GRF(3, RK_PC3, 3, 0x030c, WRITE_MASK_VAL(2, 2, 1)), /* SPI1 IO mux M1 */
RK_MUXROUTE_GRF(2, RK_PC1, 4, 0x030c, WRITE_MASK_VAL(4, 4, 0)), /* SPI2 IO mux M0 */
RK_MUXROUTE_GRF(3, RK_PA0, 3, 0x030c, WRITE_MASK_VAL(4, 4, 1)), /* SPI2 IO mux M1 */
RK_MUXROUTE_GRF(4, RK_PB3, 4, 0x030c, WRITE_MASK_VAL(6, 6, 0)), /* SPI3 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PC2, 2, 0x030c, WRITE_MASK_VAL(6, 6, 1)), /* SPI3 IO mux M1 */
RK_MUXROUTE_GRF(2, RK_PB4, 2, 0x030c, WRITE_MASK_VAL(8, 8, 0)), /* UART1 IO mux M0 */
RK_MUXROUTE_PMU(0, RK_PD1, 1, 0x030c, WRITE_MASK_VAL(8, 8, 1)), /* UART1 IO mux M1 */
RK_MUXROUTE_PMU(0, RK_PD1, 1, 0x030c, WRITE_MASK_VAL(10, 10, 0)), /* UART2 IO mux M0 */
RK_MUXROUTE_GRF(1, RK_PD5, 2, 0x030c, WRITE_MASK_VAL(10, 10, 1)), /* UART2 IO mux M1 */
RK_MUXROUTE_GRF(1, RK_PA1, 2, 0x030c, WRITE_MASK_VAL(12, 12, 0)), /* UART3 IO mux M0 */
RK_MUXROUTE_GRF(3, RK_PB7, 4, 0x030c, WRITE_MASK_VAL(12, 12, 1)), /* UART3 IO mux M1 */
RK_MUXROUTE_GRF(1, RK_PA6, 2, 0x030c, WRITE_MASK_VAL(14, 14, 0)), /* UART4 IO mux M0 */
RK_MUXROUTE_GRF(3, RK_PB2, 4, 0x030c, WRITE_MASK_VAL(14, 14, 1)), /* UART4 IO mux M1 */
RK_MUXROUTE_GRF(2, RK_PA2, 3, 0x0310, WRITE_MASK_VAL(0, 0, 0)), /* UART5 IO mux M0 */
RK_MUXROUTE_GRF(3, RK_PC2, 4, 0x0310, WRITE_MASK_VAL(0, 0, 1)), /* UART5 IO mux M1 */
RK_MUXROUTE_GRF(2, RK_PA4, 3, 0x0310, WRITE_MASK_VAL(2, 2, 0)), /* UART6 IO mux M0 */
RK_MUXROUTE_GRF(1, RK_PD5, 3, 0x0310, WRITE_MASK_VAL(2, 2, 1)), /* UART6 IO mux M1 */
RK_MUXROUTE_GRF(2, RK_PA6, 3, 0x0310, WRITE_MASK_VAL(5, 4, 0)), /* UART7 IO mux M0 */
RK_MUXROUTE_GRF(3, RK_PC4, 4, 0x0310, WRITE_MASK_VAL(5, 4, 1)), /* UART7 IO mux M1 */
RK_MUXROUTE_GRF(4, RK_PA2, 4, 0x0310, WRITE_MASK_VAL(5, 4, 2)), /* UART7 IO mux M2 */
RK_MUXROUTE_GRF(2, RK_PC5, 3, 0x0310, WRITE_MASK_VAL(6, 6, 0)), /* UART8 IO mux M0 */
RK_MUXROUTE_GRF(2, RK_PD7, 4, 0x0310, WRITE_MASK_VAL(6, 6, 1)), /* UART8 IO mux M1 */
RK_MUXROUTE_GRF(2, RK_PB0, 3, 0x0310, WRITE_MASK_VAL(9, 8, 0)), /* UART9 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PC5, 4, 0x0310, WRITE_MASK_VAL(9, 8, 1)), /* UART9 IO mux M1 */
RK_MUXROUTE_GRF(4, RK_PA4, 4, 0x0310, WRITE_MASK_VAL(9, 8, 2)), /* UART9 IO mux M2 */
RK_MUXROUTE_GRF(1, RK_PA2, 1, 0x0310, WRITE_MASK_VAL(11, 10, 0)), /* I2S1 IO mux M0 */
RK_MUXROUTE_GRF(3, RK_PC6, 4, 0x0310, WRITE_MASK_VAL(11, 10, 1)), /* I2S1 IO mux M1 */
RK_MUXROUTE_GRF(2, RK_PD0, 5, 0x0310, WRITE_MASK_VAL(11, 10, 2)), /* I2S1 IO mux M2 */
RK_MUXROUTE_GRF(2, RK_PC1, 1, 0x0310, WRITE_MASK_VAL(12, 12, 0)), /* I2S2 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PB6, 5, 0x0310, WRITE_MASK_VAL(12, 12, 1)), /* I2S2 IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PA2, 4, 0x0310, WRITE_MASK_VAL(14, 14, 0)), /* I2S3 IO mux M0 */
RK_MUXROUTE_GRF(4, RK_PC2, 5, 0x0310, WRITE_MASK_VAL(14, 14, 1)), /* I2S3 IO mux M1 */
RK_MUXROUTE_GRF(1, RK_PA4, 3, 0x0314, WRITE_MASK_VAL(1, 0, 0)), /* PDM IO mux M0 */
RK_MUXROUTE_GRF(1, RK_PA6, 3, 0x0314, WRITE_MASK_VAL(1, 0, 0)), /* PDM IO mux M0 */
RK_MUXROUTE_GRF(3, RK_PD6, 5, 0x0314, WRITE_MASK_VAL(1, 0, 1)), /* PDM IO mux M1 */
RK_MUXROUTE_GRF(4, RK_PA0, 4, 0x0314, WRITE_MASK_VAL(1, 0, 1)), /* PDM IO mux M1 */
RK_MUXROUTE_GRF(3, RK_PC4, 5, 0x0314, WRITE_MASK_VAL(1, 0, 2)), /* PDM IO mux M2 */
RK_MUXROUTE_PMU(0, RK_PA5, 3, 0x0314, WRITE_MASK_VAL(3, 2, 0)), /* PCIE20 IO mux M0 */
RK_MUXROUTE_GRF(2, RK_PD0, 4, 0x0314, WRITE_MASK_VAL(3, 2, 1)), /* PCIE20 IO mux M1 */
RK_MUXROUTE_GRF(1, RK_PB0, 4, 0x0314, WRITE_MASK_VAL(3, 2, 2)), /* PCIE20 IO mux M2 */
RK_MUXROUTE_PMU(0, RK_PA4, 3, 0x0314, WRITE_MASK_VAL(5, 4, 0)), /* PCIE30X1 IO mux M0 */
RK_MUXROUTE_GRF(2, RK_PD2, 4, 0x0314, WRITE_MASK_VAL(5, 4, 1)), /* PCIE30X1 IO mux M1 */
RK_MUXROUTE_GRF(1, RK_PA5, 4, 0x0314, WRITE_MASK_VAL(5, 4, 2)), /* PCIE30X1 IO mux M2 */
RK_MUXROUTE_PMU(0, RK_PA6, 2, 0x0314, WRITE_MASK_VAL(7, 6, 0)), /* PCIE30X2 IO mux M0 */
RK_MUXROUTE_GRF(2, RK_PD4, 4, 0x0314, WRITE_MASK_VAL(7, 6, 1)), /* PCIE30X2 IO mux M1 */
RK_MUXROUTE_GRF(4, RK_PC2, 4, 0x0314, WRITE_MASK_VAL(7, 6, 2)), /* PCIE30X2 IO mux M2 */
};
static bool rockchip_get_mux_route(struct rockchip_pin_bank *bank, int pin,
int mux, u32 *loc, u32 *reg, u32 *value)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct rockchip_mux_route_data *data;
int i;
for (i = 0; i < ctrl->niomux_routes; i++) {
data = &ctrl->iomux_routes[i];
if ((data->bank_num == bank->bank_num) &&
(data->pin == pin) && (data->func == mux))
break;
}
if (i >= ctrl->niomux_routes)
return false;
*loc = data->route_location;
*reg = data->route_offset;
*value = data->route_val;
return true;
}
static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
int iomux_num = (pin / 8);
struct regmap *regmap;
unsigned int val;
int reg, ret, mask, mux_type;
u8 bit;
if (iomux_num > 3)
return -EINVAL;
if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) {
dev_err(info->dev, "pin %d is unrouted\n", pin);
return -EINVAL;
}
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY)
return RK_FUNC_GPIO;
if (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
regmap = info->regmap_pmu;
else if (bank->iomux[iomux_num].type & IOMUX_L_SOURCE_PMU)
regmap = (pin % 8 < 4) ? info->regmap_pmu : info->regmap_base;
else
regmap = info->regmap_base;
/* get basic quadrupel of mux registers and the correct reg inside */
mux_type = bank->iomux[iomux_num].type;
reg = bank->iomux[iomux_num].offset;
if (mux_type & IOMUX_WIDTH_4BIT) {
if ((pin % 8) >= 4)
reg += 0x4;
bit = (pin % 4) * 4;
mask = 0xf;
} else if (mux_type & IOMUX_WIDTH_3BIT) {
if ((pin % 8) >= 5)
reg += 0x4;
bit = (pin % 8 % 5) * 3;
mask = 0x7;
} else {
bit = (pin % 8) * 2;
mask = 0x3;
}
if (bank->recalced_mask & BIT(pin))
rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
if (ctrl->type == RK3588) {
if (bank->bank_num == 0) {
if ((pin >= RK_PB4) && (pin <= RK_PD7)) {
u32 reg0 = 0;
reg0 = reg + 0x4000 - 0xC; /* PMU2_IOC_BASE */
ret = regmap_read(regmap, reg0, &val);
if (ret)
return ret;
if (!(val & BIT(8)))
return ((val >> bit) & mask);
reg = reg + 0x8000; /* BUS_IOC_BASE */
regmap = info->regmap_base;
}
} else if (bank->bank_num > 0) {
reg += 0x8000; /* BUS_IOC_BASE */
}
}
ret = regmap_read(regmap, reg, &val);
if (ret)
return ret;
return ((val >> bit) & mask);
}
static int rockchip_verify_mux(struct rockchip_pin_bank *bank,
int pin, int mux)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct device *dev = info->dev;
int iomux_num = (pin / 8);
if (iomux_num > 3)
return -EINVAL;
if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) {
dev_err(dev, "pin %d is unrouted\n", pin);
return -EINVAL;
}
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) {
if (mux != RK_FUNC_GPIO) {
dev_err(dev, "pin %d only supports a gpio mux\n", pin);
return -ENOTSUPP;
}
}
return 0;
}
/*
* Set a new mux function for a pin.
*
* The register is divided into the upper and lower 16 bit. When changing
* a value, the previous register value is not read and changed. Instead
* it seems the changed bits are marked in the upper 16 bit, while the
* changed value gets set in the same offset in the lower 16 bit.
* All pin settings seem to be 2 bit wide in both the upper and lower
* parts.
* @bank: pin bank to change
* @pin: pin to change
* @mux: new mux function to set
*/
static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct device *dev = info->dev;
int iomux_num = (pin / 8);
struct regmap *regmap;
int reg, ret, mask, mux_type;
u8 bit;
u32 data, rmask, route_location, route_reg, route_val;
ret = rockchip_verify_mux(bank, pin, mux);
if (ret < 0)
return ret;
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY)
return 0;
dev_dbg(dev, "setting mux of GPIO%d-%d to %d\n", bank->bank_num, pin, mux);
if (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
regmap = info->regmap_pmu;
else if (bank->iomux[iomux_num].type & IOMUX_L_SOURCE_PMU)
regmap = (pin % 8 < 4) ? info->regmap_pmu : info->regmap_base;
else
regmap = info->regmap_base;
/* get basic quadrupel of mux registers and the correct reg inside */
mux_type = bank->iomux[iomux_num].type;
reg = bank->iomux[iomux_num].offset;
if (mux_type & IOMUX_WIDTH_4BIT) {
if ((pin % 8) >= 4)
reg += 0x4;
bit = (pin % 4) * 4;
mask = 0xf;
} else if (mux_type & IOMUX_WIDTH_3BIT) {
if ((pin % 8) >= 5)
reg += 0x4;
bit = (pin % 8 % 5) * 3;
mask = 0x7;
} else {
bit = (pin % 8) * 2;
mask = 0x3;
}
if (bank->recalced_mask & BIT(pin))
rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
if (ctrl->type == RK3588) {
if (bank->bank_num == 0) {
if ((pin >= RK_PB4) && (pin <= RK_PD7)) {
if (mux < 8) {
reg += 0x4000 - 0xC; /* PMU2_IOC_BASE */
data = (mask << (bit + 16));
rmask = data | (data >> 16);
data |= (mux & mask) << bit;
ret = regmap_update_bits(regmap, reg, rmask, data);
} else {
u32 reg0 = 0;
reg0 = reg + 0x4000 - 0xC; /* PMU2_IOC_BASE */
data = (mask << (bit + 16));
rmask = data | (data >> 16);
data |= 8 << bit;
ret = regmap_update_bits(regmap, reg0, rmask, data);
reg0 = reg + 0x8000; /* BUS_IOC_BASE */
data = (mask << (bit + 16));
rmask = data | (data >> 16);
data |= mux << bit;
regmap = info->regmap_base;
ret |= regmap_update_bits(regmap, reg0, rmask, data);
}
} else {
data = (mask << (bit + 16));
rmask = data | (data >> 16);
data |= (mux & mask) << bit;
ret = regmap_update_bits(regmap, reg, rmask, data);
}
return ret;
} else if (bank->bank_num > 0) {
reg += 0x8000; /* BUS_IOC_BASE */
}
}
if (mux > mask)
return -EINVAL;
if (bank->route_mask & BIT(pin)) {
if (rockchip_get_mux_route(bank, pin, mux, &route_location,
&route_reg, &route_val)) {
struct regmap *route_regmap = regmap;
/* handle special locations */
switch (route_location) {
case ROCKCHIP_ROUTE_PMU:
route_regmap = info->regmap_pmu;
break;
case ROCKCHIP_ROUTE_GRF:
route_regmap = info->regmap_base;
break;
}
ret = regmap_write(route_regmap, route_reg, route_val);
if (ret)
return ret;
}
}
data = (mask << (bit + 16));
rmask = data | (data >> 16);
data |= (mux & mask) << bit;
ret = regmap_update_bits(regmap, reg, rmask, data);
return ret;
}
#define PX30_PULL_PMU_OFFSET 0x10
#define PX30_PULL_GRF_OFFSET 0x60
#define PX30_PULL_BITS_PER_PIN 2
#define PX30_PULL_PINS_PER_REG 8
#define PX30_PULL_BANK_STRIDE 16
static int px30_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 32 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = PX30_PULL_PMU_OFFSET;
} else {
*regmap = info->regmap_base;
*reg = PX30_PULL_GRF_OFFSET;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * PX30_PULL_BANK_STRIDE;
}
*reg += ((pin_num / PX30_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % PX30_PULL_PINS_PER_REG);
*bit *= PX30_PULL_BITS_PER_PIN;
return 0;
}
#define PX30_DRV_PMU_OFFSET 0x20
#define PX30_DRV_GRF_OFFSET 0xf0
#define PX30_DRV_BITS_PER_PIN 2
#define PX30_DRV_PINS_PER_REG 8
#define PX30_DRV_BANK_STRIDE 16
static int px30_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 32 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = PX30_DRV_PMU_OFFSET;
} else {
*regmap = info->regmap_base;
*reg = PX30_DRV_GRF_OFFSET;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * PX30_DRV_BANK_STRIDE;
}
*reg += ((pin_num / PX30_DRV_PINS_PER_REG) * 4);
*bit = (pin_num % PX30_DRV_PINS_PER_REG);
*bit *= PX30_DRV_BITS_PER_PIN;
return 0;
}
#define PX30_SCHMITT_PMU_OFFSET 0x38
#define PX30_SCHMITT_GRF_OFFSET 0xc0
#define PX30_SCHMITT_PINS_PER_PMU_REG 16
#define PX30_SCHMITT_BANK_STRIDE 16
#define PX30_SCHMITT_PINS_PER_GRF_REG 8
static int px30_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num,
struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
int pins_per_reg;
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = PX30_SCHMITT_PMU_OFFSET;
pins_per_reg = PX30_SCHMITT_PINS_PER_PMU_REG;
} else {
*regmap = info->regmap_base;
*reg = PX30_SCHMITT_GRF_OFFSET;
pins_per_reg = PX30_SCHMITT_PINS_PER_GRF_REG;
*reg += (bank->bank_num - 1) * PX30_SCHMITT_BANK_STRIDE;
}
*reg += ((pin_num / pins_per_reg) * 4);
*bit = pin_num % pins_per_reg;
return 0;
}
#define RV1108_PULL_PMU_OFFSET 0x10
#define RV1108_PULL_OFFSET 0x110
#define RV1108_PULL_PINS_PER_REG 8
#define RV1108_PULL_BITS_PER_PIN 2
#define RV1108_PULL_BANK_STRIDE 16
static int rv1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RV1108_PULL_PMU_OFFSET;
} else {
*reg = RV1108_PULL_OFFSET;
*regmap = info->regmap_base;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * RV1108_PULL_BANK_STRIDE;
}
*reg += ((pin_num / RV1108_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RV1108_PULL_PINS_PER_REG);
*bit *= RV1108_PULL_BITS_PER_PIN;
return 0;
}
#define RV1108_DRV_PMU_OFFSET 0x20
#define RV1108_DRV_GRF_OFFSET 0x210
#define RV1108_DRV_BITS_PER_PIN 2
#define RV1108_DRV_PINS_PER_REG 8
#define RV1108_DRV_BANK_STRIDE 16
static int rv1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RV1108_DRV_PMU_OFFSET;
} else {
*regmap = info->regmap_base;
*reg = RV1108_DRV_GRF_OFFSET;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * RV1108_DRV_BANK_STRIDE;
}
*reg += ((pin_num / RV1108_DRV_PINS_PER_REG) * 4);
*bit = pin_num % RV1108_DRV_PINS_PER_REG;
*bit *= RV1108_DRV_BITS_PER_PIN;
return 0;
}
#define RV1108_SCHMITT_PMU_OFFSET 0x30
#define RV1108_SCHMITT_GRF_OFFSET 0x388
#define RV1108_SCHMITT_BANK_STRIDE 8
#define RV1108_SCHMITT_PINS_PER_GRF_REG 16
#define RV1108_SCHMITT_PINS_PER_PMU_REG 8
static int rv1108_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num,
struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
int pins_per_reg;
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RV1108_SCHMITT_PMU_OFFSET;
pins_per_reg = RV1108_SCHMITT_PINS_PER_PMU_REG;
} else {
*regmap = info->regmap_base;
*reg = RV1108_SCHMITT_GRF_OFFSET;
pins_per_reg = RV1108_SCHMITT_PINS_PER_GRF_REG;
*reg += (bank->bank_num - 1) * RV1108_SCHMITT_BANK_STRIDE;
}
*reg += ((pin_num / pins_per_reg) * 4);
*bit = pin_num % pins_per_reg;
return 0;
}
#define RV1126_PULL_PMU_OFFSET 0x40
#define RV1126_PULL_GRF_GPIO1A0_OFFSET 0x10108
#define RV1126_PULL_PINS_PER_REG 8
#define RV1126_PULL_BITS_PER_PIN 2
#define RV1126_PULL_BANK_STRIDE 16
#define RV1126_GPIO_C4_D7(p) (p >= 20 && p <= 31) /* GPIO0_C4 ~ GPIO0_D7 */
static int rv1126_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
if (RV1126_GPIO_C4_D7(pin_num)) {
*regmap = info->regmap_base;
*reg = RV1126_PULL_GRF_GPIO1A0_OFFSET;
*reg -= (((31 - pin_num) / RV1126_PULL_PINS_PER_REG + 1) * 4);
*bit = pin_num % RV1126_PULL_PINS_PER_REG;
*bit *= RV1126_PULL_BITS_PER_PIN;
return 0;
}
*regmap = info->regmap_pmu;
*reg = RV1126_PULL_PMU_OFFSET;
} else {
*reg = RV1126_PULL_GRF_GPIO1A0_OFFSET;
*regmap = info->regmap_base;
*reg += (bank->bank_num - 1) * RV1126_PULL_BANK_STRIDE;
}
*reg += ((pin_num / RV1126_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RV1126_PULL_PINS_PER_REG);
*bit *= RV1126_PULL_BITS_PER_PIN;
return 0;
}
#define RV1126_DRV_PMU_OFFSET 0x20
#define RV1126_DRV_GRF_GPIO1A0_OFFSET 0x10090
#define RV1126_DRV_BITS_PER_PIN 4
#define RV1126_DRV_PINS_PER_REG 4
#define RV1126_DRV_BANK_STRIDE 32
static int rv1126_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
if (RV1126_GPIO_C4_D7(pin_num)) {
*regmap = info->regmap_base;
*reg = RV1126_DRV_GRF_GPIO1A0_OFFSET;
*reg -= (((31 - pin_num) / RV1126_DRV_PINS_PER_REG + 1) * 4);
*reg -= 0x4;
*bit = pin_num % RV1126_DRV_PINS_PER_REG;
*bit *= RV1126_DRV_BITS_PER_PIN;
return 0;
}
*regmap = info->regmap_pmu;
*reg = RV1126_DRV_PMU_OFFSET;
} else {
*regmap = info->regmap_base;
*reg = RV1126_DRV_GRF_GPIO1A0_OFFSET;
*reg += (bank->bank_num - 1) * RV1126_DRV_BANK_STRIDE;
}
*reg += ((pin_num / RV1126_DRV_PINS_PER_REG) * 4);
*bit = pin_num % RV1126_DRV_PINS_PER_REG;
*bit *= RV1126_DRV_BITS_PER_PIN;
return 0;
}
#define RV1126_SCHMITT_PMU_OFFSET 0x60
#define RV1126_SCHMITT_GRF_GPIO1A0_OFFSET 0x10188
#define RV1126_SCHMITT_BANK_STRIDE 16
#define RV1126_SCHMITT_PINS_PER_GRF_REG 8
#define RV1126_SCHMITT_PINS_PER_PMU_REG 8
static int rv1126_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num,
struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
int pins_per_reg;
if (bank->bank_num == 0) {
if (RV1126_GPIO_C4_D7(pin_num)) {
*regmap = info->regmap_base;
*reg = RV1126_SCHMITT_GRF_GPIO1A0_OFFSET;
*reg -= (((31 - pin_num) / RV1126_SCHMITT_PINS_PER_GRF_REG + 1) * 4);
*bit = pin_num % RV1126_SCHMITT_PINS_PER_GRF_REG;
return 0;
}
*regmap = info->regmap_pmu;
*reg = RV1126_SCHMITT_PMU_OFFSET;
pins_per_reg = RV1126_SCHMITT_PINS_PER_PMU_REG;
} else {
*regmap = info->regmap_base;
*reg = RV1126_SCHMITT_GRF_GPIO1A0_OFFSET;
pins_per_reg = RV1126_SCHMITT_PINS_PER_GRF_REG;
*reg += (bank->bank_num - 1) * RV1126_SCHMITT_BANK_STRIDE;
}
*reg += ((pin_num / pins_per_reg) * 4);
*bit = pin_num % pins_per_reg;
return 0;
}
#define RK3308_SCHMITT_PINS_PER_REG 8
#define RK3308_SCHMITT_BANK_STRIDE 16
#define RK3308_SCHMITT_GRF_OFFSET 0x1a0
static int rk3308_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
*regmap = info->regmap_base;
*reg = RK3308_SCHMITT_GRF_OFFSET;
*reg += bank->bank_num * RK3308_SCHMITT_BANK_STRIDE;
*reg += ((pin_num / RK3308_SCHMITT_PINS_PER_REG) * 4);
*bit = pin_num % RK3308_SCHMITT_PINS_PER_REG;
return 0;
}
#define RK2928_PULL_OFFSET 0x118
#define RK2928_PULL_PINS_PER_REG 16
#define RK2928_PULL_BANK_STRIDE 8
static int rk2928_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
*regmap = info->regmap_base;
*reg = RK2928_PULL_OFFSET;
*reg += bank->bank_num * RK2928_PULL_BANK_STRIDE;
*reg += (pin_num / RK2928_PULL_PINS_PER_REG) * 4;
*bit = pin_num % RK2928_PULL_PINS_PER_REG;
return 0;
};
#define RK3128_PULL_OFFSET 0x118
static int rk3128_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
*regmap = info->regmap_base;
*reg = RK3128_PULL_OFFSET;
*reg += bank->bank_num * RK2928_PULL_BANK_STRIDE;
*reg += ((pin_num / RK2928_PULL_PINS_PER_REG) * 4);
*bit = pin_num % RK2928_PULL_PINS_PER_REG;
return 0;
}
#define RK3188_PULL_OFFSET 0x164
#define RK3188_PULL_BITS_PER_PIN 2
#define RK3188_PULL_PINS_PER_REG 8
#define RK3188_PULL_BANK_STRIDE 16
#define RK3188_PULL_PMU_OFFSET 0x64
static int rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 12 pins of the first bank are located elsewhere */
if (bank->bank_num == 0 && pin_num < 12) {
*regmap = info->regmap_pmu ? info->regmap_pmu
: bank->regmap_pull;
*reg = info->regmap_pmu ? RK3188_PULL_PMU_OFFSET : 0;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
*bit = pin_num % RK3188_PULL_PINS_PER_REG;
*bit *= RK3188_PULL_BITS_PER_PIN;
} else {
*regmap = info->regmap_pull ? info->regmap_pull
: info->regmap_base;
*reg = info->regmap_pull ? 0 : RK3188_PULL_OFFSET;
/* correct the offset, as it is the 2nd pull register */
*reg -= 4;
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
/*
* The bits in these registers have an inverse ordering
* with the lowest pin being in bits 15:14 and the highest
* pin in bits 1:0
*/
*bit = 7 - (pin_num % RK3188_PULL_PINS_PER_REG);
*bit *= RK3188_PULL_BITS_PER_PIN;
}
return 0;
}
#define RK3288_PULL_OFFSET 0x140
static int rk3288_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RK3188_PULL_PMU_OFFSET;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
*bit = pin_num % RK3188_PULL_PINS_PER_REG;
*bit *= RK3188_PULL_BITS_PER_PIN;
} else {
*regmap = info->regmap_base;
*reg = RK3288_PULL_OFFSET;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
*bit *= RK3188_PULL_BITS_PER_PIN;
}
return 0;
}
#define RK3288_DRV_PMU_OFFSET 0x70
#define RK3288_DRV_GRF_OFFSET 0x1c0
#define RK3288_DRV_BITS_PER_PIN 2
#define RK3288_DRV_PINS_PER_REG 8
#define RK3288_DRV_BANK_STRIDE 16
static int rk3288_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RK3288_DRV_PMU_OFFSET;
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
*bit = pin_num % RK3288_DRV_PINS_PER_REG;
*bit *= RK3288_DRV_BITS_PER_PIN;
} else {
*regmap = info->regmap_base;
*reg = RK3288_DRV_GRF_OFFSET;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
*bit = (pin_num % RK3288_DRV_PINS_PER_REG);
*bit *= RK3288_DRV_BITS_PER_PIN;
}
return 0;
}
#define RK3228_PULL_OFFSET 0x100
static int rk3228_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
*regmap = info->regmap_base;
*reg = RK3228_PULL_OFFSET;
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
*bit *= RK3188_PULL_BITS_PER_PIN;
return 0;
}
#define RK3228_DRV_GRF_OFFSET 0x200
static int rk3228_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
*regmap = info->regmap_base;
*reg = RK3228_DRV_GRF_OFFSET;
*reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
*bit = (pin_num % RK3288_DRV_PINS_PER_REG);
*bit *= RK3288_DRV_BITS_PER_PIN;
return 0;
}
#define RK3308_PULL_OFFSET 0xa0
static int rk3308_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
*regmap = info->regmap_base;
*reg = RK3308_PULL_OFFSET;
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
*bit *= RK3188_PULL_BITS_PER_PIN;
return 0;
}
#define RK3308_DRV_GRF_OFFSET 0x100
static int rk3308_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
*regmap = info->regmap_base;
*reg = RK3308_DRV_GRF_OFFSET;
*reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
*bit = (pin_num % RK3288_DRV_PINS_PER_REG);
*bit *= RK3288_DRV_BITS_PER_PIN;
return 0;
}
#define RK3368_PULL_GRF_OFFSET 0x100
#define RK3368_PULL_PMU_OFFSET 0x10
static int rk3368_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 32 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RK3368_PULL_PMU_OFFSET;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
*bit = pin_num % RK3188_PULL_PINS_PER_REG;
*bit *= RK3188_PULL_BITS_PER_PIN;
} else {
*regmap = info->regmap_base;
*reg = RK3368_PULL_GRF_OFFSET;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
*bit *= RK3188_PULL_BITS_PER_PIN;
}
return 0;
}
#define RK3368_DRV_PMU_OFFSET 0x20
#define RK3368_DRV_GRF_OFFSET 0x200
static int rk3368_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 32 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RK3368_DRV_PMU_OFFSET;
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
*bit = pin_num % RK3288_DRV_PINS_PER_REG;
*bit *= RK3288_DRV_BITS_PER_PIN;
} else {
*regmap = info->regmap_base;
*reg = RK3368_DRV_GRF_OFFSET;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
*bit = (pin_num % RK3288_DRV_PINS_PER_REG);
*bit *= RK3288_DRV_BITS_PER_PIN;
}
return 0;
}
#define RK3399_PULL_GRF_OFFSET 0xe040
#define RK3399_PULL_PMU_OFFSET 0x40
#define RK3399_DRV_3BITS_PER_PIN 3
static int rk3399_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The bank0:16 and bank1:32 pins are located in PMU */
if ((bank->bank_num == 0) || (bank->bank_num == 1)) {
*regmap = info->regmap_pmu;
*reg = RK3399_PULL_PMU_OFFSET;
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
*bit = pin_num % RK3188_PULL_PINS_PER_REG;
*bit *= RK3188_PULL_BITS_PER_PIN;
} else {
*regmap = info->regmap_base;
*reg = RK3399_PULL_GRF_OFFSET;
/* correct the offset, as we're starting with the 3rd bank */
*reg -= 0x20;
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
*bit *= RK3188_PULL_BITS_PER_PIN;
}
return 0;
}
static int rk3399_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
int drv_num = (pin_num / 8);
/* The bank0:16 and bank1:32 pins are located in PMU */
if ((bank->bank_num == 0) || (bank->bank_num == 1))
*regmap = info->regmap_pmu;
else
*regmap = info->regmap_base;
*reg = bank->drv[drv_num].offset;
if ((bank->drv[drv_num].drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) ||
(bank->drv[drv_num].drv_type == DRV_TYPE_IO_3V3_ONLY))
*bit = (pin_num % 8) * 3;
else
*bit = (pin_num % 8) * 2;
return 0;
}
#define RK3568_PULL_PMU_OFFSET 0x20
#define RK3568_PULL_GRF_OFFSET 0x80
#define RK3568_PULL_BITS_PER_PIN 2
#define RK3568_PULL_PINS_PER_REG 8
#define RK3568_PULL_BANK_STRIDE 0x10
static int rk3568_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RK3568_PULL_PMU_OFFSET;
*reg += bank->bank_num * RK3568_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3568_PULL_PINS_PER_REG) * 4);
*bit = pin_num % RK3568_PULL_PINS_PER_REG;
*bit *= RK3568_PULL_BITS_PER_PIN;
} else {
*regmap = info->regmap_base;
*reg = RK3568_PULL_GRF_OFFSET;
*reg += (bank->bank_num - 1) * RK3568_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3568_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RK3568_PULL_PINS_PER_REG);
*bit *= RK3568_PULL_BITS_PER_PIN;
}
return 0;
}
#define RK3568_DRV_PMU_OFFSET 0x70
#define RK3568_DRV_GRF_OFFSET 0x200
#define RK3568_DRV_BITS_PER_PIN 8
#define RK3568_DRV_PINS_PER_REG 2
#define RK3568_DRV_BANK_STRIDE 0x40
static int rk3568_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
/* The first 32 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RK3568_DRV_PMU_OFFSET;
*reg += ((pin_num / RK3568_DRV_PINS_PER_REG) * 4);
*bit = pin_num % RK3568_DRV_PINS_PER_REG;
*bit *= RK3568_DRV_BITS_PER_PIN;
} else {
*regmap = info->regmap_base;
*reg = RK3568_DRV_GRF_OFFSET;
*reg += (bank->bank_num - 1) * RK3568_DRV_BANK_STRIDE;
*reg += ((pin_num / RK3568_DRV_PINS_PER_REG) * 4);
*bit = (pin_num % RK3568_DRV_PINS_PER_REG);
*bit *= RK3568_DRV_BITS_PER_PIN;
}
return 0;
}
#define RK3588_PMU1_IOC_REG (0x0000)
#define RK3588_PMU2_IOC_REG (0x4000)
#define RK3588_BUS_IOC_REG (0x8000)
#define RK3588_VCCIO1_4_IOC_REG (0x9000)
#define RK3588_VCCIO3_5_IOC_REG (0xA000)
#define RK3588_VCCIO2_IOC_REG (0xB000)
#define RK3588_VCCIO6_IOC_REG (0xC000)
#define RK3588_EMMC_IOC_REG (0xD000)
static const u32 rk3588_ds_regs[][2] = {
{RK_GPIO0_A0, RK3588_PMU1_IOC_REG + 0x0010},
{RK_GPIO0_A4, RK3588_PMU1_IOC_REG + 0x0014},
{RK_GPIO0_B0, RK3588_PMU1_IOC_REG + 0x0018},
{RK_GPIO0_B4, RK3588_PMU2_IOC_REG + 0x0014},
{RK_GPIO0_C0, RK3588_PMU2_IOC_REG + 0x0018},
{RK_GPIO0_C4, RK3588_PMU2_IOC_REG + 0x001C},
{RK_GPIO0_D0, RK3588_PMU2_IOC_REG + 0x0020},
{RK_GPIO0_D4, RK3588_PMU2_IOC_REG + 0x0024},
{RK_GPIO1_A0, RK3588_VCCIO1_4_IOC_REG + 0x0020},
{RK_GPIO1_A4, RK3588_VCCIO1_4_IOC_REG + 0x0024},
{RK_GPIO1_B0, RK3588_VCCIO1_4_IOC_REG + 0x0028},
{RK_GPIO1_B4, RK3588_VCCIO1_4_IOC_REG + 0x002C},
{RK_GPIO1_C0, RK3588_VCCIO1_4_IOC_REG + 0x0030},
{RK_GPIO1_C4, RK3588_VCCIO1_4_IOC_REG + 0x0034},
{RK_GPIO1_D0, RK3588_VCCIO1_4_IOC_REG + 0x0038},
{RK_GPIO1_D4, RK3588_VCCIO1_4_IOC_REG + 0x003C},
{RK_GPIO2_A0, RK3588_EMMC_IOC_REG + 0x0040},
{RK_GPIO2_A4, RK3588_VCCIO3_5_IOC_REG + 0x0044},
{RK_GPIO2_B0, RK3588_VCCIO3_5_IOC_REG + 0x0048},
{RK_GPIO2_B4, RK3588_VCCIO3_5_IOC_REG + 0x004C},
{RK_GPIO2_C0, RK3588_VCCIO3_5_IOC_REG + 0x0050},
{RK_GPIO2_C4, RK3588_VCCIO3_5_IOC_REG + 0x0054},
{RK_GPIO2_D0, RK3588_EMMC_IOC_REG + 0x0058},
{RK_GPIO2_D4, RK3588_EMMC_IOC_REG + 0x005C},
{RK_GPIO3_A0, RK3588_VCCIO3_5_IOC_REG + 0x0060},
{RK_GPIO3_A4, RK3588_VCCIO3_5_IOC_REG + 0x0064},
{RK_GPIO3_B0, RK3588_VCCIO3_5_IOC_REG + 0x0068},
{RK_GPIO3_B4, RK3588_VCCIO3_5_IOC_REG + 0x006C},
{RK_GPIO3_C0, RK3588_VCCIO3_5_IOC_REG + 0x0070},
{RK_GPIO3_C4, RK3588_VCCIO3_5_IOC_REG + 0x0074},
{RK_GPIO3_D0, RK3588_VCCIO3_5_IOC_REG + 0x0078},
{RK_GPIO3_D4, RK3588_VCCIO3_5_IOC_REG + 0x007C},
{RK_GPIO4_A0, RK3588_VCCIO6_IOC_REG + 0x0080},
{RK_GPIO4_A4, RK3588_VCCIO6_IOC_REG + 0x0084},
{RK_GPIO4_B0, RK3588_VCCIO6_IOC_REG + 0x0088},
{RK_GPIO4_B4, RK3588_VCCIO6_IOC_REG + 0x008C},
{RK_GPIO4_C0, RK3588_VCCIO6_IOC_REG + 0x0090},
{RK_GPIO4_C2, RK3588_VCCIO3_5_IOC_REG + 0x0090},
{RK_GPIO4_C4, RK3588_VCCIO3_5_IOC_REG + 0x0094},
{RK_GPIO4_D0, RK3588_VCCIO2_IOC_REG + 0x0098},
{RK_GPIO4_D4, RK3588_VCCIO2_IOC_REG + 0x009C},
};
static const u32 rk3588_p_regs[][2] = {
{RK_GPIO0_A0, RK3588_PMU1_IOC_REG + 0x0020},
{RK_GPIO0_B0, RK3588_PMU1_IOC_REG + 0x0024},
{RK_GPIO0_B5, RK3588_PMU2_IOC_REG + 0x0028},
{RK_GPIO0_C0, RK3588_PMU2_IOC_REG + 0x002C},
{RK_GPIO0_D0, RK3588_PMU2_IOC_REG + 0x0030},
{RK_GPIO1_A0, RK3588_VCCIO1_4_IOC_REG + 0x0110},
{RK_GPIO1_B0, RK3588_VCCIO1_4_IOC_REG + 0x0114},
{RK_GPIO1_C0, RK3588_VCCIO1_4_IOC_REG + 0x0118},
{RK_GPIO1_D0, RK3588_VCCIO1_4_IOC_REG + 0x011C},
{RK_GPIO2_A0, RK3588_EMMC_IOC_REG + 0x0120},
{RK_GPIO2_A6, RK3588_VCCIO3_5_IOC_REG + 0x0120},
{RK_GPIO2_B0, RK3588_VCCIO3_5_IOC_REG + 0x0124},
{RK_GPIO2_C0, RK3588_VCCIO3_5_IOC_REG + 0x0128},
{RK_GPIO2_D0, RK3588_EMMC_IOC_REG + 0x012C},
{RK_GPIO3_A0, RK3588_VCCIO3_5_IOC_REG + 0x0130},
{RK_GPIO3_B0, RK3588_VCCIO3_5_IOC_REG + 0x0134},
{RK_GPIO3_C0, RK3588_VCCIO3_5_IOC_REG + 0x0138},
{RK_GPIO3_D0, RK3588_VCCIO3_5_IOC_REG + 0x013C},
{RK_GPIO4_A0, RK3588_VCCIO6_IOC_REG + 0x0140},
{RK_GPIO4_B0, RK3588_VCCIO6_IOC_REG + 0x0144},
{RK_GPIO4_C0, RK3588_VCCIO6_IOC_REG + 0x0148},
{RK_GPIO4_C2, RK3588_VCCIO3_5_IOC_REG + 0x0148},
{RK_GPIO4_D0, RK3588_VCCIO2_IOC_REG + 0x014C},
};
static const u32 rk3588_smt_regs[][2] = {
{RK_GPIO0_A0, RK3588_PMU1_IOC_REG + 0x0030},
{RK_GPIO0_B0, RK3588_PMU1_IOC_REG + 0x0034},
{RK_GPIO0_B5, RK3588_PMU2_IOC_REG + 0x0040},
{RK_GPIO0_C0, RK3588_PMU2_IOC_REG + 0x0044},
{RK_GPIO0_D0, RK3588_PMU2_IOC_REG + 0x0048},
{RK_GPIO1_A0, RK3588_VCCIO1_4_IOC_REG + 0x0210},
{RK_GPIO1_B0, RK3588_VCCIO1_4_IOC_REG + 0x0214},
{RK_GPIO1_C0, RK3588_VCCIO1_4_IOC_REG + 0x0218},
{RK_GPIO1_D0, RK3588_VCCIO1_4_IOC_REG + 0x021C},
{RK_GPIO2_A0, RK3588_EMMC_IOC_REG + 0x0220},
{RK_GPIO2_A6, RK3588_VCCIO3_5_IOC_REG + 0x0220},
{RK_GPIO2_B0, RK3588_VCCIO3_5_IOC_REG + 0x0224},
{RK_GPIO2_C0, RK3588_VCCIO3_5_IOC_REG + 0x0228},
{RK_GPIO2_D0, RK3588_EMMC_IOC_REG + 0x022C},
{RK_GPIO3_A0, RK3588_VCCIO3_5_IOC_REG + 0x0230},
{RK_GPIO3_B0, RK3588_VCCIO3_5_IOC_REG + 0x0234},
{RK_GPIO3_C0, RK3588_VCCIO3_5_IOC_REG + 0x0238},
{RK_GPIO3_D0, RK3588_VCCIO3_5_IOC_REG + 0x023C},
{RK_GPIO4_A0, RK3588_VCCIO6_IOC_REG + 0x0240},
{RK_GPIO4_B0, RK3588_VCCIO6_IOC_REG + 0x0244},
{RK_GPIO4_C0, RK3588_VCCIO6_IOC_REG + 0x0248},
{RK_GPIO4_C2, RK3588_VCCIO3_5_IOC_REG + 0x0248},
{RK_GPIO4_D0, RK3588_VCCIO2_IOC_REG + 0x024C},
};
#define RK3588_PULL_BITS_PER_PIN 2
#define RK3588_PULL_PINS_PER_REG 8
static int rk3588_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
u8 bank_num = bank->bank_num;
u32 pin = bank_num * 32 + pin_num;
int i;
for (i = ARRAY_SIZE(rk3588_p_regs) - 1; i >= 0; i--) {
if (pin >= rk3588_p_regs[i][0]) {
*reg = rk3588_p_regs[i][1];
*regmap = info->regmap_base;
*bit = pin_num % RK3588_PULL_PINS_PER_REG;
*bit *= RK3588_PULL_BITS_PER_PIN;
return 0;
}
}
return -EINVAL;
}
#define RK3588_DRV_BITS_PER_PIN 4
#define RK3588_DRV_PINS_PER_REG 4
static int rk3588_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
u8 bank_num = bank->bank_num;
u32 pin = bank_num * 32 + pin_num;
int i;
for (i = ARRAY_SIZE(rk3588_ds_regs) - 1; i >= 0; i--) {
if (pin >= rk3588_ds_regs[i][0]) {
*reg = rk3588_ds_regs[i][1];
*regmap = info->regmap_base;
*bit = pin_num % RK3588_DRV_PINS_PER_REG;
*bit *= RK3588_DRV_BITS_PER_PIN;
return 0;
}
}
return -EINVAL;
}
#define RK3588_SMT_BITS_PER_PIN 1
#define RK3588_SMT_PINS_PER_REG 8
static int rk3588_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num,
struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
u8 bank_num = bank->bank_num;
u32 pin = bank_num * 32 + pin_num;
int i;
for (i = ARRAY_SIZE(rk3588_smt_regs) - 1; i >= 0; i--) {
if (pin >= rk3588_smt_regs[i][0]) {
*reg = rk3588_smt_regs[i][1];
*regmap = info->regmap_base;
*bit = pin_num % RK3588_SMT_PINS_PER_REG;
*bit *= RK3588_SMT_BITS_PER_PIN;
return 0;
}
}
return -EINVAL;
}
static int rockchip_perpin_drv_list[DRV_TYPE_MAX][8] = {
{ 2, 4, 8, 12, -1, -1, -1, -1 },
{ 3, 6, 9, 12, -1, -1, -1, -1 },
{ 5, 10, 15, 20, -1, -1, -1, -1 },
{ 4, 6, 8, 10, 12, 14, 16, 18 },
{ 4, 7, 10, 13, 16, 19, 22, 26 }
};
static int rockchip_get_drive_perpin(struct rockchip_pin_bank *bank,
int pin_num)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct device *dev = info->dev;
struct regmap *regmap;
int reg, ret;
u32 data, temp, rmask_bits;
u8 bit;
int drv_type = bank->drv[pin_num / 8].drv_type;
ret = ctrl->drv_calc_reg(bank, pin_num, &regmap, &reg, &bit);
if (ret)
return ret;
switch (drv_type) {
case DRV_TYPE_IO_1V8_3V0_AUTO:
case DRV_TYPE_IO_3V3_ONLY:
rmask_bits = RK3399_DRV_3BITS_PER_PIN;
switch (bit) {
case 0 ... 12:
/* regular case, nothing to do */
break;
case 15:
/*
* drive-strength offset is special, as it is
* spread over 2 registers
*/
ret = regmap_read(regmap, reg, &data);
if (ret)
return ret;
ret = regmap_read(regmap, reg + 0x4, &temp);
if (ret)
return ret;
/*
* the bit data[15] contains bit 0 of the value
* while temp[1:0] contains bits 2 and 1
*/
data >>= 15;
temp &= 0x3;
temp <<= 1;
data |= temp;
return rockchip_perpin_drv_list[drv_type][data];
case 18 ... 21:
/* setting fully enclosed in the second register */
reg += 4;
bit -= 16;
break;
default:
dev_err(dev, "unsupported bit: %d for pinctrl drive type: %d\n",
bit, drv_type);
return -EINVAL;
}
break;
case DRV_TYPE_IO_DEFAULT:
case DRV_TYPE_IO_1V8_OR_3V0:
case DRV_TYPE_IO_1V8_ONLY:
rmask_bits = RK3288_DRV_BITS_PER_PIN;
break;
default:
dev_err(dev, "unsupported pinctrl drive type: %d\n", drv_type);
return -EINVAL;
}
ret = regmap_read(regmap, reg, &data);
if (ret)
return ret;
data >>= bit;
data &= (1 << rmask_bits) - 1;
return rockchip_perpin_drv_list[drv_type][data];
}
static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
int pin_num, int strength)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct device *dev = info->dev;
struct regmap *regmap;
int reg, ret, i;
u32 data, rmask, rmask_bits, temp;
u8 bit;
int drv_type = bank->drv[pin_num / 8].drv_type;
dev_dbg(dev, "setting drive of GPIO%d-%d to %d\n",
bank->bank_num, pin_num, strength);
ret = ctrl->drv_calc_reg(bank, pin_num, &regmap, &reg, &bit);
if (ret)
return ret;
if (ctrl->type == RK3588) {
rmask_bits = RK3588_DRV_BITS_PER_PIN;
ret = strength;
goto config;
} else if (ctrl->type == RK3568) {
rmask_bits = RK3568_DRV_BITS_PER_PIN;
ret = (1 << (strength + 1)) - 1;
goto config;
}
if (ctrl->type == RV1126) {
rmask_bits = RV1126_DRV_BITS_PER_PIN;
ret = strength;
goto config;
}
ret = -EINVAL;
for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[drv_type]); i++) {
if (rockchip_perpin_drv_list[drv_type][i] == strength) {
ret = i;
break;
} else if (rockchip_perpin_drv_list[drv_type][i] < 0) {
ret = rockchip_perpin_drv_list[drv_type][i];
break;
}
}
if (ret < 0) {
dev_err(dev, "unsupported driver strength %d\n", strength);
return ret;
}
switch (drv_type) {
case DRV_TYPE_IO_1V8_3V0_AUTO:
case DRV_TYPE_IO_3V3_ONLY:
rmask_bits = RK3399_DRV_3BITS_PER_PIN;
switch (bit) {
case 0 ... 12:
/* regular case, nothing to do */
break;
case 15:
/*
* drive-strength offset is special, as it is spread
* over 2 registers, the bit data[15] contains bit 0
* of the value while temp[1:0] contains bits 2 and 1
*/
data = (ret & 0x1) << 15;
temp = (ret >> 0x1) & 0x3;
rmask = BIT(15) | BIT(31);
data |= BIT(31);
ret = regmap_update_bits(regmap, reg, rmask, data);
if (ret)
return ret;
rmask = 0x3 | (0x3 << 16);
temp |= (0x3 << 16);
reg += 0x4;
ret = regmap_update_bits(regmap, reg, rmask, temp);
return ret;
case 18 ... 21:
/* setting fully enclosed in the second register */
reg += 4;
bit -= 16;
break;
default:
dev_err(dev, "unsupported bit: %d for pinctrl drive type: %d\n",
bit, drv_type);
return -EINVAL;
}
break;
case DRV_TYPE_IO_DEFAULT:
case DRV_TYPE_IO_1V8_OR_3V0:
case DRV_TYPE_IO_1V8_ONLY:
rmask_bits = RK3288_DRV_BITS_PER_PIN;
break;
default:
dev_err(dev, "unsupported pinctrl drive type: %d\n", drv_type);
return -EINVAL;
}
config:
/* enable the write to the equivalent lower bits */
data = ((1 << rmask_bits) - 1) << (bit + 16);
rmask = data | (data >> 16);
data |= (ret << bit);
ret = regmap_update_bits(regmap, reg, rmask, data);
return ret;
}
static int rockchip_pull_list[PULL_TYPE_MAX][4] = {
{
PIN_CONFIG_BIAS_DISABLE,
PIN_CONFIG_BIAS_PULL_UP,
PIN_CONFIG_BIAS_PULL_DOWN,
PIN_CONFIG_BIAS_BUS_HOLD
},
{
PIN_CONFIG_BIAS_DISABLE,
PIN_CONFIG_BIAS_PULL_DOWN,
PIN_CONFIG_BIAS_DISABLE,
PIN_CONFIG_BIAS_PULL_UP
},
};
static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct device *dev = info->dev;
struct regmap *regmap;
int reg, ret, pull_type;
u8 bit;
u32 data;
/* rk3066b does support any pulls */
if (ctrl->type == RK3066B)
return PIN_CONFIG_BIAS_DISABLE;
ret = ctrl->pull_calc_reg(bank, pin_num, &regmap, &reg, &bit);
if (ret)
return ret;
ret = regmap_read(regmap, reg, &data);
if (ret)
return ret;
switch (ctrl->type) {
case RK2928:
case RK3128:
return !(data & BIT(bit))
? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
: PIN_CONFIG_BIAS_DISABLE;
case PX30:
case RV1108:
case RK3188:
case RK3288:
case RK3308:
case RK3368:
case RK3399:
case RK3588:
pull_type = bank->pull_type[pin_num / 8];
data >>= bit;
data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1;
return rockchip_pull_list[pull_type][data];
default:
dev_err(dev, "unsupported pinctrl type\n");
return -EINVAL;
};
}
static int rockchip_set_pull(struct rockchip_pin_bank *bank,
int pin_num, int pull)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct device *dev = info->dev;
struct regmap *regmap;
int reg, ret, i, pull_type;
u8 bit;
u32 data, rmask;
dev_dbg(dev, "setting pull of GPIO%d-%d to %d\n", bank->bank_num, pin_num, pull);
/* rk3066b does support any pulls */
if (ctrl->type == RK3066B)
return pull ? -EINVAL : 0;
ret = ctrl->pull_calc_reg(bank, pin_num, &regmap, &reg, &bit);
if (ret)
return ret;
switch (ctrl->type) {
case RK2928:
case RK3128:
data = BIT(bit + 16);
if (pull == PIN_CONFIG_BIAS_DISABLE)
data |= BIT(bit);
ret = regmap_write(regmap, reg, data);
break;
case PX30:
case RV1108:
case RV1126:
case RK3188:
case RK3288:
case RK3308:
case RK3368:
case RK3399:
case RK3568:
case RK3588:
pull_type = bank->pull_type[pin_num / 8];
ret = -EINVAL;
for (i = 0; i < ARRAY_SIZE(rockchip_pull_list[pull_type]);
i++) {
if (rockchip_pull_list[pull_type][i] == pull) {
ret = i;
break;
}
}
/*
* In the TRM, pull-up being 1 for everything except the GPIO0_D0-D6,
* where that pull up value becomes 3.
*/
if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {
if (ret == 1)
ret = 3;
}
if (ret < 0) {
dev_err(dev, "unsupported pull setting %d\n", pull);
return ret;
}
/* enable the write to the equivalent lower bits */
data = ((1 << RK3188_PULL_BITS_PER_PIN) - 1) << (bit + 16);
rmask = data | (data >> 16);
data |= (ret << bit);
ret = regmap_update_bits(regmap, reg, rmask, data);
break;
default:
dev_err(dev, "unsupported pinctrl type\n");
return -EINVAL;
}
return ret;
}
#define RK3328_SCHMITT_BITS_PER_PIN 1
#define RK3328_SCHMITT_PINS_PER_REG 16
#define RK3328_SCHMITT_BANK_STRIDE 8
#define RK3328_SCHMITT_GRF_OFFSET 0x380
static int rk3328_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num,
struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
*regmap = info->regmap_base;
*reg = RK3328_SCHMITT_GRF_OFFSET;
*reg += bank->bank_num * RK3328_SCHMITT_BANK_STRIDE;
*reg += ((pin_num / RK3328_SCHMITT_PINS_PER_REG) * 4);
*bit = pin_num % RK3328_SCHMITT_PINS_PER_REG;
return 0;
}
#define RK3568_SCHMITT_BITS_PER_PIN 2
#define RK3568_SCHMITT_PINS_PER_REG 8
#define RK3568_SCHMITT_BANK_STRIDE 0x10
#define RK3568_SCHMITT_GRF_OFFSET 0xc0
#define RK3568_SCHMITT_PMUGRF_OFFSET 0x30
static int rk3568_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num,
struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RK3568_SCHMITT_PMUGRF_OFFSET;
} else {
*regmap = info->regmap_base;
*reg = RK3568_SCHMITT_GRF_OFFSET;
*reg += (bank->bank_num - 1) * RK3568_SCHMITT_BANK_STRIDE;
}
*reg += ((pin_num / RK3568_SCHMITT_PINS_PER_REG) * 4);
*bit = pin_num % RK3568_SCHMITT_PINS_PER_REG;
*bit *= RK3568_SCHMITT_BITS_PER_PIN;
return 0;
}
static int rockchip_get_schmitt(struct rockchip_pin_bank *bank, int pin_num)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct regmap *regmap;
int reg, ret;
u8 bit;
u32 data;
ret = ctrl->schmitt_calc_reg(bank, pin_num, &regmap, &reg, &bit);
if (ret)
return ret;
ret = regmap_read(regmap, reg, &data);
if (ret)
return ret;
data >>= bit;
switch (ctrl->type) {
case RK3568:
return data & ((1 << RK3568_SCHMITT_BITS_PER_PIN) - 1);
default:
break;
}
return data & 0x1;
}
static int rockchip_set_schmitt(struct rockchip_pin_bank *bank,
int pin_num, int enable)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct device *dev = info->dev;
struct regmap *regmap;
int reg, ret;
u8 bit;
u32 data, rmask;
dev_dbg(dev, "setting input schmitt of GPIO%d-%d to %d\n",
bank->bank_num, pin_num, enable);
ret = ctrl->schmitt_calc_reg(bank, pin_num, &regmap, &reg, &bit);
if (ret)
return ret;
/* enable the write to the equivalent lower bits */
switch (ctrl->type) {
case RK3568:
data = ((1 << RK3568_SCHMITT_BITS_PER_PIN) - 1) << (bit + 16);
rmask = data | (data >> 16);
data |= ((enable ? 0x2 : 0x1) << bit);
break;
default:
data = BIT(bit + 16) | (enable << bit);
rmask = BIT(bit + 16) | BIT(bit);
break;
}
return regmap_update_bits(regmap, reg, rmask, data);
}
/*
* Pinmux_ops handling
*/
static int rockchip_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
return info->nfunctions;
}
static const char *rockchip_pmx_get_func_name(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
return info->functions[selector].name;
}
static int rockchip_pmx_get_groups(struct pinctrl_dev *pctldev,
unsigned selector, const char * const **groups,
unsigned * const num_groups)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
*groups = info->functions[selector].groups;
*num_groups = info->functions[selector].ngroups;
return 0;
}
static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
unsigned group)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
const unsigned int *pins = info->groups[group].pins;
const struct rockchip_pin_config *data = info->groups[group].data;
struct device *dev = info->dev;
struct rockchip_pin_bank *bank;
int cnt, ret = 0;
dev_dbg(dev, "enable function %s group %s\n",
info->functions[selector].name, info->groups[group].name);
/*
* for each pin in the pin group selected, program the corresponding
* pin function number in the config register.
*/
for (cnt = 0; cnt < info->groups[group].npins; cnt++) {
bank = pin_to_bank(info, pins[cnt]);
ret = rockchip_set_mux(bank, pins[cnt] - bank->pin_base,
data[cnt].func);
if (ret)
break;
}
if (ret) {
/* revert the already done pin settings */
for (cnt--; cnt >= 0; cnt--)
rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0);
return ret;
}
return 0;
}
static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned offset,
bool input)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
struct rockchip_pin_bank *bank;
bank = pin_to_bank(info, offset);
return rockchip_set_mux(bank, offset - bank->pin_base, RK_FUNC_GPIO);
}
static const struct pinmux_ops rockchip_pmx_ops = {
.get_functions_count = rockchip_pmx_get_funcs_count,
.get_function_name = rockchip_pmx_get_func_name,
.get_function_groups = rockchip_pmx_get_groups,
.set_mux = rockchip_pmx_set,
.gpio_set_direction = rockchip_pmx_gpio_set_direction,
};
/*
* Pinconf_ops handling
*/
static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
enum pin_config_param pull)
{
switch (ctrl->type) {
case RK2928:
case RK3128:
return (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT ||
pull == PIN_CONFIG_BIAS_DISABLE);
case RK3066B:
return pull ? false : true;
case PX30:
case RV1108:
case RV1126:
case RK3188:
case RK3288:
case RK3308:
case RK3368:
case RK3399:
case RK3568:
case RK3588:
return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT);
}
return false;
}
static int rockchip_pinconf_defer_pin(struct rockchip_pin_bank *bank,
unsigned int pin, u32 param, u32 arg)
{
struct rockchip_pin_deferred *cfg;
cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
if (!cfg)
return -ENOMEM;
cfg->pin = pin;
cfg->param = param;
cfg->arg = arg;
list_add_tail(&cfg->head, &bank->deferred_pins);
return 0;
}
/* set the pin config settings for a specified pin */
static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *configs, unsigned num_configs)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
struct rockchip_pin_bank *bank = pin_to_bank(info, pin);
struct gpio_chip *gpio = &bank->gpio_chip;
enum pin_config_param param;
u32 arg;
int i;
int rc;
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
if (param == PIN_CONFIG_OUTPUT || param == PIN_CONFIG_INPUT_ENABLE) {
/*
* Check for gpio driver not being probed yet.
* The lock makes sure that either gpio-probe has completed
* or the gpio driver hasn't probed yet.
*/
mutex_lock(&bank->deferred_lock);
if (!gpio || !gpio->direction_output) {
rc = rockchip_pinconf_defer_pin(bank, pin - bank->pin_base, param,
arg);
mutex_unlock(&bank->deferred_lock);
if (rc)
return rc;
break;
}
mutex_unlock(&bank->deferred_lock);
}
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
rc = rockchip_set_pull(bank, pin - bank->pin_base,
param);
if (rc)
return rc;
break;
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
case PIN_CONFIG_BIAS_BUS_HOLD:
if (!rockchip_pinconf_pull_valid(info->ctrl, param))
return -ENOTSUPP;
if (!arg)
return -EINVAL;
rc = rockchip_set_pull(bank, pin - bank->pin_base,
param);
if (rc)
return rc;
break;
case PIN_CONFIG_OUTPUT:
rc = rockchip_set_mux(bank, pin - bank->pin_base,
RK_FUNC_GPIO);
if (rc != RK_FUNC_GPIO)
return -EINVAL;
rc = gpio->direction_output(gpio, pin - bank->pin_base,
arg);
if (rc)
return rc;
break;
case PIN_CONFIG_INPUT_ENABLE:
rc = rockchip_set_mux(bank, pin - bank->pin_base,
RK_FUNC_GPIO);
if (rc != RK_FUNC_GPIO)
return -EINVAL;
rc = gpio->direction_input(gpio, pin - bank->pin_base);
if (rc)
return rc;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
/* rk3288 is the first with per-pin drive-strength */
if (!info->ctrl->drv_calc_reg)
return -ENOTSUPP;
rc = rockchip_set_drive_perpin(bank,
pin - bank->pin_base, arg);
if (rc < 0)
return rc;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
if (!info->ctrl->schmitt_calc_reg)
return -ENOTSUPP;
rc = rockchip_set_schmitt(bank,
pin - bank->pin_base, arg);
if (rc < 0)
return rc;
break;
default:
return -ENOTSUPP;
break;
}
} /* for each config */
return 0;
}
/* get the pin config settings for a specified pin */
static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *config)
{
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
struct rockchip_pin_bank *bank = pin_to_bank(info, pin);
struct gpio_chip *gpio = &bank->gpio_chip;
enum pin_config_param param = pinconf_to_config_param(*config);
u16 arg;
int rc;
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
if (rockchip_get_pull(bank, pin - bank->pin_base) != param)
return -EINVAL;
arg = 0;
break;
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
case PIN_CONFIG_BIAS_BUS_HOLD:
if (!rockchip_pinconf_pull_valid(info->ctrl, param))
return -ENOTSUPP;
if (rockchip_get_pull(bank, pin - bank->pin_base) != param)
return -EINVAL;
arg = 1;
break;
case PIN_CONFIG_OUTPUT:
rc = rockchip_get_mux(bank, pin - bank->pin_base);
if (rc != RK_FUNC_GPIO)
return -EINVAL;
if (!gpio || !gpio->get) {
arg = 0;
break;
}
rc = gpio->get(gpio, pin - bank->pin_base);
if (rc < 0)
return rc;
arg = rc ? 1 : 0;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
/* rk3288 is the first with per-pin drive-strength */
if (!info->ctrl->drv_calc_reg)
return -ENOTSUPP;
rc = rockchip_get_drive_perpin(bank, pin - bank->pin_base);
if (rc < 0)
return rc;
arg = rc;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
if (!info->ctrl->schmitt_calc_reg)
return -ENOTSUPP;
rc = rockchip_get_schmitt(bank, pin - bank->pin_base);
if (rc < 0)
return rc;
arg = rc;
break;
default:
return -ENOTSUPP;
break;
}
*config = pinconf_to_config_packed(param, arg);
return 0;
}
static const struct pinconf_ops rockchip_pinconf_ops = {
.pin_config_get = rockchip_pinconf_get,
.pin_config_set = rockchip_pinconf_set,
.is_generic = true,
};
static const struct of_device_id rockchip_bank_match[] = {
{ .compatible = "rockchip,gpio-bank" },
{ .compatible = "rockchip,rk3188-gpio-bank0" },
{},
};
static void rockchip_pinctrl_child_count(struct rockchip_pinctrl *info,
struct device_node *np)
{
struct device_node *child;
for_each_child_of_node(np, child) {
if (of_match_node(rockchip_bank_match, child))
continue;
info->nfunctions++;
info->ngroups += of_get_child_count(child);
}
}
static int rockchip_pinctrl_parse_groups(struct device_node *np,
struct rockchip_pin_group *grp,
struct rockchip_pinctrl *info,
u32 index)
{
struct device *dev = info->dev;
struct rockchip_pin_bank *bank;
int size;
const __be32 *list;
int num;
int i, j;
int ret;
dev_dbg(dev, "group(%d): %pOFn\n", index, np);
/* Initialise group */
grp->name = np->name;
/*
* the binding format is rockchip,pins = <bank pin mux CONFIG>,
* do sanity check and calculate pins number
*/
list = of_get_property(np, "rockchip,pins", &size);
/* we do not check return since it's safe node passed down */
size /= sizeof(*list);
if (!size || size % 4)
return dev_err_probe(dev, -EINVAL, "wrong pins number or pins and configs should be by 4\n");
grp->npins = size / 4;
grp->pins = devm_kcalloc(dev, grp->npins, sizeof(*grp->pins), GFP_KERNEL);
grp->data = devm_kcalloc(dev, grp->npins, sizeof(*grp->data), GFP_KERNEL);
if (!grp->pins || !grp->data)
return -ENOMEM;
for (i = 0, j = 0; i < size; i += 4, j++) {
const __be32 *phandle;
struct device_node *np_config;
num = be32_to_cpu(*list++);
bank = bank_num_to_bank(info, num);
if (IS_ERR(bank))
return PTR_ERR(bank);
grp->pins[j] = bank->pin_base + be32_to_cpu(*list++);
grp->data[j].func = be32_to_cpu(*list++);
phandle = list++;
if (!phandle)
return -EINVAL;
np_config = of_find_node_by_phandle(be32_to_cpup(phandle));
pinctrl: pinconf-generic: Allow driver to specify DT params Additionally to the generic DT parameters, allow drivers to provide driver-specific DT parameters to be used with the generic parser infrastructure. To achieve this 'struct pinctrl_desc' is extended to pass custom pinconf option to the core. In order to pass this kind of information, the related data structures - 'struct pinconf_generic_dt_params', 'pin_config_item' - are moved from pinconf internals to the pinconf-generic header. Additionally pinconfg-generic is refactored to not only iterate over the generic pinconf parameters but also take the parameters into account that are provided through the driver's 'struct pinctrl_desc'. In particular 'pinconf_generic_parse_dt_config()' and 'pinconf_generic_dump' helpers are split into two parts each. In order to have a more generic helper that can be used to process the generic parameters as well as the driver-specific ones. v2: - fix typo - add missing documentation for @conf_items member in struct - rebase to pinctrl/devel: conflict in abx500 - rename _pinconf_generic_dump() to pinconf_generic_dump_one() - removed '_' from _parse_dt_cfg() - removed BUG_ONs, error condition is handled in if statements - removed pinconf_generic_dump_group() & pinconf_generic_dump_pin helpers - fixed up corresponding call sites - renamed pinconf_generic_dump() to pinconf_generic_dump_pins() - added kernel-doc to pinconf_generic_dump_pins() - add kernel-doc - more verbose commit message Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-09 23:43:46 +08:00
ret = pinconf_generic_parse_dt_config(np_config, NULL,
&grp->data[j].configs, &grp->data[j].nconfigs);
of_node_put(np_config);
if (ret)
return ret;
}
return 0;
}
static int rockchip_pinctrl_parse_functions(struct device_node *np,
struct rockchip_pinctrl *info,
u32 index)
{
struct device *dev = info->dev;
struct device_node *child;
struct rockchip_pmx_func *func;
struct rockchip_pin_group *grp;
int ret;
static u32 grp_index;
u32 i = 0;
dev_dbg(dev, "parse function(%d): %pOFn\n", index, np);
func = &info->functions[index];
/* Initialise function */
func->name = np->name;
func->ngroups = of_get_child_count(np);
if (func->ngroups <= 0)
return 0;
func->groups = devm_kcalloc(dev, func->ngroups, sizeof(*func->groups), GFP_KERNEL);
if (!func->groups)
return -ENOMEM;
for_each_child_of_node(np, child) {
func->groups[i] = child->name;
grp = &info->groups[grp_index++];
ret = rockchip_pinctrl_parse_groups(child, grp, info, i++);
if (ret) {
of_node_put(child);
return ret;
}
}
return 0;
}
static int rockchip_pinctrl_parse_dt(struct platform_device *pdev,
struct rockchip_pinctrl *info)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct device_node *child;
int ret;
int i;
rockchip_pinctrl_child_count(info, np);
dev_dbg(dev, "nfunctions = %d\n", info->nfunctions);
dev_dbg(dev, "ngroups = %d\n", info->ngroups);
info->functions = devm_kcalloc(dev, info->nfunctions, sizeof(*info->functions), GFP_KERNEL);
if (!info->functions)
return -ENOMEM;
info->groups = devm_kcalloc(dev, info->ngroups, sizeof(*info->groups), GFP_KERNEL);
if (!info->groups)
return -ENOMEM;
i = 0;
for_each_child_of_node(np, child) {
if (of_match_node(rockchip_bank_match, child))
continue;
ret = rockchip_pinctrl_parse_functions(child, info, i++);
if (ret) {
dev_err(dev, "failed to parse function\n");
of_node_put(child);
return ret;
}
}
return 0;
}
static int rockchip_pinctrl_register(struct platform_device *pdev,
struct rockchip_pinctrl *info)
{
struct pinctrl_desc *ctrldesc = &info->pctl;
struct pinctrl_pin_desc *pindesc, *pdesc;
struct rockchip_pin_bank *pin_bank;
struct device *dev = &pdev->dev;
char **pin_names;
int pin, bank, ret;
int k;
ctrldesc->name = "rockchip-pinctrl";
ctrldesc->owner = THIS_MODULE;
ctrldesc->pctlops = &rockchip_pctrl_ops;
ctrldesc->pmxops = &rockchip_pmx_ops;
ctrldesc->confops = &rockchip_pinconf_ops;
pindesc = devm_kcalloc(dev, info->ctrl->nr_pins, sizeof(*pindesc), GFP_KERNEL);
if (!pindesc)
return -ENOMEM;
ctrldesc->pins = pindesc;
ctrldesc->npins = info->ctrl->nr_pins;
pdesc = pindesc;
for (bank = 0, k = 0; bank < info->ctrl->nr_banks; bank++) {
pin_bank = &info->ctrl->pin_banks[bank];
pin_names = devm_kasprintf_strarray(dev, pin_bank->name, pin_bank->nr_pins);
if (IS_ERR(pin_names))
return PTR_ERR(pin_names);
for (pin = 0; pin < pin_bank->nr_pins; pin++, k++) {
pdesc->number = k;
pdesc->name = pin_names[pin];
pdesc++;
}
INIT_LIST_HEAD(&pin_bank->deferred_pins);
mutex_init(&pin_bank->deferred_lock);
}
ret = rockchip_pinctrl_parse_dt(pdev, info);
if (ret)
return ret;
info->pctl_dev = devm_pinctrl_register(dev, ctrldesc, info);
if (IS_ERR(info->pctl_dev))
return dev_err_probe(dev, PTR_ERR(info->pctl_dev), "could not register pinctrl driver\n");
return 0;
}
static const struct of_device_id rockchip_pinctrl_dt_match[];
/* retrieve the soc specific data */
static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data(
struct rockchip_pinctrl *d,
struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
const struct of_device_id *match;
struct rockchip_pin_ctrl *ctrl;
struct rockchip_pin_bank *bank;
int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j;
match = of_match_node(rockchip_pinctrl_dt_match, node);
ctrl = (struct rockchip_pin_ctrl *)match->data;
grf_offs = ctrl->grf_mux_offset;
pmu_offs = ctrl->pmu_mux_offset;
drv_pmu_offs = ctrl->pmu_drv_offset;
drv_grf_offs = ctrl->grf_drv_offset;
bank = ctrl->pin_banks;
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
int bank_pins = 0;
raw_spin_lock_init(&bank->slock);
bank->drvdata = d;
bank->pin_base = ctrl->nr_pins;
ctrl->nr_pins += bank->nr_pins;
/* calculate iomux and drv offsets */
for (j = 0; j < 4; j++) {
struct rockchip_iomux *iom = &bank->iomux[j];
struct rockchip_drv *drv = &bank->drv[j];
int inc;
if (bank_pins >= bank->nr_pins)
break;
/* preset iomux offset value, set new start value */
if (iom->offset >= 0) {
if ((iom->type & IOMUX_SOURCE_PMU) ||
(iom->type & IOMUX_L_SOURCE_PMU))
pmu_offs = iom->offset;
else
grf_offs = iom->offset;
} else { /* set current iomux offset */
iom->offset = ((iom->type & IOMUX_SOURCE_PMU) ||
(iom->type & IOMUX_L_SOURCE_PMU)) ?
pmu_offs : grf_offs;
}
/* preset drv offset value, set new start value */
if (drv->offset >= 0) {
if (iom->type & IOMUX_SOURCE_PMU)
drv_pmu_offs = drv->offset;
else
drv_grf_offs = drv->offset;
} else { /* set current drv offset */
drv->offset = (iom->type & IOMUX_SOURCE_PMU) ?
drv_pmu_offs : drv_grf_offs;
}
dev_dbg(dev, "bank %d, iomux %d has iom_offset 0x%x drv_offset 0x%x\n",
i, j, iom->offset, drv->offset);
/*
* Increase offset according to iomux width.
* 4bit iomux'es are spread over two registers.
*/
inc = (iom->type & (IOMUX_WIDTH_4BIT |
IOMUX_WIDTH_3BIT |
IOMUX_WIDTH_2BIT)) ? 8 : 4;
if ((iom->type & IOMUX_SOURCE_PMU) || (iom->type & IOMUX_L_SOURCE_PMU))
pmu_offs += inc;
else
grf_offs += inc;
/*
* Increase offset according to drv width.
* 3bit drive-strenth'es are spread over two registers.
*/
if ((drv->drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) ||
(drv->drv_type == DRV_TYPE_IO_3V3_ONLY))
inc = 8;
else
inc = 4;
if (iom->type & IOMUX_SOURCE_PMU)
drv_pmu_offs += inc;
else
drv_grf_offs += inc;
bank_pins += 8;
}
/* calculate the per-bank recalced_mask */
for (j = 0; j < ctrl->niomux_recalced; j++) {
int pin = 0;
if (ctrl->iomux_recalced[j].num == bank->bank_num) {
pin = ctrl->iomux_recalced[j].pin;
bank->recalced_mask |= BIT(pin);
}
}
/* calculate the per-bank route_mask */
for (j = 0; j < ctrl->niomux_routes; j++) {
int pin = 0;
if (ctrl->iomux_routes[j].bank_num == bank->bank_num) {
pin = ctrl->iomux_routes[j].pin;
bank->route_mask |= BIT(pin);
}
}
}
return ctrl;
}
#define RK3288_GRF_GPIO6C_IOMUX 0x64
#define GPIO6C6_SEL_WRITE_ENABLE BIT(28)
static u32 rk3288_grf_gpio6c_iomux;
static int __maybe_unused rockchip_pinctrl_suspend(struct device *dev)
{
struct rockchip_pinctrl *info = dev_get_drvdata(dev);
int ret = pinctrl_force_sleep(info->pctl_dev);
if (ret)
return ret;
/*
* RK3288 GPIO6_C6 mux would be modified by Maskrom when resume, so save
* the setting here, and restore it at resume.
*/
if (info->ctrl->type == RK3288) {
ret = regmap_read(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX,
&rk3288_grf_gpio6c_iomux);
if (ret) {
pinctrl_force_default(info->pctl_dev);
return ret;
}
}
return 0;
}
static int __maybe_unused rockchip_pinctrl_resume(struct device *dev)
{
struct rockchip_pinctrl *info = dev_get_drvdata(dev);
int ret;
if (info->ctrl->type == RK3288) {
ret = regmap_write(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX,
rk3288_grf_gpio6c_iomux |
GPIO6C6_SEL_WRITE_ENABLE);
if (ret)
return ret;
}
return pinctrl_force_default(info->pctl_dev);
}
static SIMPLE_DEV_PM_OPS(rockchip_pinctrl_dev_pm_ops, rockchip_pinctrl_suspend,
rockchip_pinctrl_resume);
static int rockchip_pinctrl_probe(struct platform_device *pdev)
{
struct rockchip_pinctrl *info;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node, *node;
struct rockchip_pin_ctrl *ctrl;
struct resource *res;
void __iomem *base;
int ret;
if (!dev->of_node)
return dev_err_probe(dev, -ENODEV, "device tree node not found\n");
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->dev = dev;
ctrl = rockchip_pinctrl_get_soc_data(info, pdev);
if (!ctrl)
return dev_err_probe(dev, -EINVAL, "driver data not available\n");
info->ctrl = ctrl;
node = of_parse_phandle(np, "rockchip,grf", 0);
if (node) {
info->regmap_base = syscon_node_to_regmap(node);
of_node_put(node);
if (IS_ERR(info->regmap_base))
return PTR_ERR(info->regmap_base);
} else {
base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(base))
return PTR_ERR(base);
rockchip_regmap_config.max_register = resource_size(res) - 4;
rockchip_regmap_config.name = "rockchip,pinctrl";
info->regmap_base =
devm_regmap_init_mmio(dev, base, &rockchip_regmap_config);
/* to check for the old dt-bindings */
info->reg_size = resource_size(res);
/* Honor the old binding, with pull registers as 2nd resource */
if (ctrl->type == RK3188 && info->reg_size < 0x200) {
base = devm_platform_get_and_ioremap_resource(pdev, 1, &res);
if (IS_ERR(base))
return PTR_ERR(base);
rockchip_regmap_config.max_register = resource_size(res) - 4;
rockchip_regmap_config.name = "rockchip,pinctrl-pull";
info->regmap_pull =
devm_regmap_init_mmio(dev, base, &rockchip_regmap_config);
}
}
/* try to find the optional reference to the pmu syscon */
node = of_parse_phandle(np, "rockchip,pmu", 0);
if (node) {
info->regmap_pmu = syscon_node_to_regmap(node);
of_node_put(node);
if (IS_ERR(info->regmap_pmu))
return PTR_ERR(info->regmap_pmu);
}
ret = rockchip_pinctrl_register(pdev, info);
if (ret)
return ret;
platform_set_drvdata(pdev, info);
ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
if (ret)
return dev_err_probe(dev, ret, "failed to register gpio device\n");
return 0;
}
static int rockchip_pinctrl_remove(struct platform_device *pdev)
{
struct rockchip_pinctrl *info = platform_get_drvdata(pdev);
struct rockchip_pin_bank *bank;
struct rockchip_pin_deferred *cfg;
int i;
of_platform_depopulate(&pdev->dev);
for (i = 0; i < info->ctrl->nr_banks; i++) {
bank = &info->ctrl->pin_banks[i];
mutex_lock(&bank->deferred_lock);
while (!list_empty(&bank->deferred_pins)) {
cfg = list_first_entry(&bank->deferred_pins,
struct rockchip_pin_deferred, head);
list_del(&cfg->head);
kfree(cfg);
}
mutex_unlock(&bank->deferred_lock);
}
return 0;
}
static struct rockchip_pin_bank px30_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU
),
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT
),
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT
),
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT
),
};
static struct rockchip_pin_ctrl px30_pin_ctrl = {
.pin_banks = px30_pin_banks,
.nr_banks = ARRAY_SIZE(px30_pin_banks),
.label = "PX30-GPIO",
.type = PX30,
.grf_mux_offset = 0x0,
.pmu_mux_offset = 0x0,
.iomux_routes = px30_mux_route_data,
.niomux_routes = ARRAY_SIZE(px30_mux_route_data),
.pull_calc_reg = px30_calc_pull_reg_and_bit,
.drv_calc_reg = px30_calc_drv_reg_and_bit,
.schmitt_calc_reg = px30_calc_schmitt_reg_and_bit,
};
static struct rockchip_pin_bank rv1108_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU),
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0),
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0),
};
static struct rockchip_pin_ctrl rv1108_pin_ctrl = {
.pin_banks = rv1108_pin_banks,
.nr_banks = ARRAY_SIZE(rv1108_pin_banks),
.label = "RV1108-GPIO",
.type = RV1108,
.grf_mux_offset = 0x10,
.pmu_mux_offset = 0x0,
.iomux_recalced = rv1108_mux_recalced_data,
.niomux_recalced = ARRAY_SIZE(rv1108_mux_recalced_data),
.pull_calc_reg = rv1108_calc_pull_reg_and_bit,
.drv_calc_reg = rv1108_calc_drv_reg_and_bit,
.schmitt_calc_reg = rv1108_calc_schmitt_reg_and_bit,
};
static struct rockchip_pin_bank rv1126_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0",
IOMUX_WIDTH_4BIT | IOMUX_SOURCE_PMU,
IOMUX_WIDTH_4BIT | IOMUX_SOURCE_PMU,
IOMUX_WIDTH_4BIT | IOMUX_L_SOURCE_PMU,
IOMUX_WIDTH_4BIT),
PIN_BANK_IOMUX_FLAGS_OFFSET(1, 32, "gpio1",
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
0x10010, 0x10018, 0x10020, 0x10028),
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2",
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT),
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3",
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT),
PIN_BANK_IOMUX_FLAGS(4, 2, "gpio4",
IOMUX_WIDTH_4BIT, 0, 0, 0),
};
static struct rockchip_pin_ctrl rv1126_pin_ctrl = {
.pin_banks = rv1126_pin_banks,
.nr_banks = ARRAY_SIZE(rv1126_pin_banks),
.label = "RV1126-GPIO",
.type = RV1126,
.grf_mux_offset = 0x10004, /* mux offset from GPIO0_D0 */
.pmu_mux_offset = 0x0,
.iomux_routes = rv1126_mux_route_data,
.niomux_routes = ARRAY_SIZE(rv1126_mux_route_data),
.iomux_recalced = rv1126_mux_recalced_data,
.niomux_recalced = ARRAY_SIZE(rv1126_mux_recalced_data),
.pull_calc_reg = rv1126_calc_pull_reg_and_bit,
.drv_calc_reg = rv1126_calc_drv_reg_and_bit,
.schmitt_calc_reg = rv1126_calc_schmitt_reg_and_bit,
};
static struct rockchip_pin_bank rk2928_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
};
static struct rockchip_pin_ctrl rk2928_pin_ctrl = {
.pin_banks = rk2928_pin_banks,
.nr_banks = ARRAY_SIZE(rk2928_pin_banks),
.label = "RK2928-GPIO",
.type = RK2928,
.grf_mux_offset = 0xa8,
.pull_calc_reg = rk2928_calc_pull_reg_and_bit,
};
static struct rockchip_pin_bank rk3036_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
};
static struct rockchip_pin_ctrl rk3036_pin_ctrl = {
.pin_banks = rk3036_pin_banks,
.nr_banks = ARRAY_SIZE(rk3036_pin_banks),
.label = "RK3036-GPIO",
.type = RK2928,
.grf_mux_offset = 0xa8,
.pull_calc_reg = rk2928_calc_pull_reg_and_bit,
};
static struct rockchip_pin_bank rk3066a_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
PIN_BANK(4, 32, "gpio4"),
PIN_BANK(6, 16, "gpio6"),
};
static struct rockchip_pin_ctrl rk3066a_pin_ctrl = {
.pin_banks = rk3066a_pin_banks,
.nr_banks = ARRAY_SIZE(rk3066a_pin_banks),
.label = "RK3066a-GPIO",
.type = RK2928,
.grf_mux_offset = 0xa8,
.pull_calc_reg = rk2928_calc_pull_reg_and_bit,
};
static struct rockchip_pin_bank rk3066b_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
};
static struct rockchip_pin_ctrl rk3066b_pin_ctrl = {
.pin_banks = rk3066b_pin_banks,
.nr_banks = ARRAY_SIZE(rk3066b_pin_banks),
.label = "RK3066b-GPIO",
.type = RK3066B,
.grf_mux_offset = 0x60,
};
static struct rockchip_pin_bank rk3128_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
};
static struct rockchip_pin_ctrl rk3128_pin_ctrl = {
.pin_banks = rk3128_pin_banks,
.nr_banks = ARRAY_SIZE(rk3128_pin_banks),
.label = "RK3128-GPIO",
.type = RK3128,
.grf_mux_offset = 0xa8,
.iomux_recalced = rk3128_mux_recalced_data,
.niomux_recalced = ARRAY_SIZE(rk3128_mux_recalced_data),
.iomux_routes = rk3128_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3128_mux_route_data),
.pull_calc_reg = rk3128_calc_pull_reg_and_bit,
};
static struct rockchip_pin_bank rk3188_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_GPIO_ONLY, 0, 0, 0),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
};
static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
.pin_banks = rk3188_pin_banks,
.nr_banks = ARRAY_SIZE(rk3188_pin_banks),
.label = "RK3188-GPIO",
.type = RK3188,
.grf_mux_offset = 0x60,
.iomux_routes = rk3188_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3188_mux_route_data),
.pull_calc_reg = rk3188_calc_pull_reg_and_bit,
};
static struct rockchip_pin_bank rk3228_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
};
static struct rockchip_pin_ctrl rk3228_pin_ctrl = {
.pin_banks = rk3228_pin_banks,
.nr_banks = ARRAY_SIZE(rk3228_pin_banks),
.label = "RK3228-GPIO",
.type = RK3288,
.grf_mux_offset = 0x0,
.iomux_routes = rk3228_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3228_mux_route_data),
.pull_calc_reg = rk3228_calc_pull_reg_and_bit,
.drv_calc_reg = rk3228_calc_drv_reg_and_bit,
};
static struct rockchip_pin_bank rk3288_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 24, "gpio0", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_UNROUTED
),
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_UNROUTED,
IOMUX_UNROUTED,
IOMUX_UNROUTED,
0
),
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, IOMUX_UNROUTED),
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, IOMUX_WIDTH_4BIT),
PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
0,
0
),
PIN_BANK_IOMUX_FLAGS(5, 32, "gpio5", IOMUX_UNROUTED,
0,
0,
IOMUX_UNROUTED
),
PIN_BANK_IOMUX_FLAGS(6, 32, "gpio6", 0, 0, 0, IOMUX_UNROUTED),
PIN_BANK_IOMUX_FLAGS(7, 32, "gpio7", 0,
0,
IOMUX_WIDTH_4BIT,
IOMUX_UNROUTED
),
PIN_BANK(8, 16, "gpio8"),
};
static struct rockchip_pin_ctrl rk3288_pin_ctrl = {
.pin_banks = rk3288_pin_banks,
.nr_banks = ARRAY_SIZE(rk3288_pin_banks),
.label = "RK3288-GPIO",
.type = RK3288,
.grf_mux_offset = 0x0,
.pmu_mux_offset = 0x84,
.iomux_routes = rk3288_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3288_mux_route_data),
.pull_calc_reg = rk3288_calc_pull_reg_and_bit,
.drv_calc_reg = rk3288_calc_drv_reg_and_bit,
};
static struct rockchip_pin_bank rk3308_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT,
IOMUX_WIDTH_2BIT),
};
static struct rockchip_pin_ctrl rk3308_pin_ctrl = {
.pin_banks = rk3308_pin_banks,
.nr_banks = ARRAY_SIZE(rk3308_pin_banks),
.label = "RK3308-GPIO",
.type = RK3308,
.grf_mux_offset = 0x0,
.iomux_recalced = rk3308_mux_recalced_data,
.niomux_recalced = ARRAY_SIZE(rk3308_mux_recalced_data),
.iomux_routes = rk3308_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3308_mux_route_data),
.pull_calc_reg = rk3308_calc_pull_reg_and_bit,
.drv_calc_reg = rk3308_calc_drv_reg_and_bit,
.schmitt_calc_reg = rk3308_calc_schmitt_reg_and_bit,
};
static struct rockchip_pin_bank rk3328_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0),
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0,
IOMUX_WIDTH_3BIT,
IOMUX_WIDTH_3BIT,
0),
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3",
IOMUX_WIDTH_3BIT,
IOMUX_WIDTH_3BIT,
0,
0),
};
static struct rockchip_pin_ctrl rk3328_pin_ctrl = {
.pin_banks = rk3328_pin_banks,
.nr_banks = ARRAY_SIZE(rk3328_pin_banks),
.label = "RK3328-GPIO",
.type = RK3288,
.grf_mux_offset = 0x0,
.iomux_recalced = rk3328_mux_recalced_data,
.niomux_recalced = ARRAY_SIZE(rk3328_mux_recalced_data),
.iomux_routes = rk3328_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3328_mux_route_data),
.pull_calc_reg = rk3228_calc_pull_reg_and_bit,
.drv_calc_reg = rk3228_calc_drv_reg_and_bit,
.schmitt_calc_reg = rk3328_calc_schmitt_reg_and_bit,
};
static struct rockchip_pin_bank rk3368_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU
),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
};
static struct rockchip_pin_ctrl rk3368_pin_ctrl = {
.pin_banks = rk3368_pin_banks,
.nr_banks = ARRAY_SIZE(rk3368_pin_banks),
.label = "RK3368-GPIO",
.type = RK3368,
.grf_mux_offset = 0x0,
.pmu_mux_offset = 0x0,
.pull_calc_reg = rk3368_calc_pull_reg_and_bit,
.drv_calc_reg = rk3368_calc_drv_reg_and_bit,
};
static struct rockchip_pin_bank rk3399_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(0, 32, "gpio0",
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
DRV_TYPE_IO_1V8_ONLY,
DRV_TYPE_IO_1V8_ONLY,
DRV_TYPE_IO_DEFAULT,
DRV_TYPE_IO_DEFAULT,
0x80,
0x88,
-1,
-1,
PULL_TYPE_IO_1V8_ONLY,
PULL_TYPE_IO_1V8_ONLY,
PULL_TYPE_IO_DEFAULT,
PULL_TYPE_IO_DEFAULT
),
PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(1, 32, "gpio1", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
DRV_TYPE_IO_1V8_OR_3V0,
DRV_TYPE_IO_1V8_OR_3V0,
DRV_TYPE_IO_1V8_OR_3V0,
DRV_TYPE_IO_1V8_OR_3V0,
0xa0,
0xa8,
0xb0,
0xb8
),
PIN_BANK_DRV_FLAGS_PULL_FLAGS(2, 32, "gpio2", DRV_TYPE_IO_1V8_OR_3V0,
DRV_TYPE_IO_1V8_OR_3V0,
DRV_TYPE_IO_1V8_ONLY,
DRV_TYPE_IO_1V8_ONLY,
PULL_TYPE_IO_DEFAULT,
PULL_TYPE_IO_DEFAULT,
PULL_TYPE_IO_1V8_ONLY,
PULL_TYPE_IO_1V8_ONLY
),
PIN_BANK_DRV_FLAGS(3, 32, "gpio3", DRV_TYPE_IO_3V3_ONLY,
DRV_TYPE_IO_3V3_ONLY,
DRV_TYPE_IO_3V3_ONLY,
DRV_TYPE_IO_1V8_OR_3V0
),
PIN_BANK_DRV_FLAGS(4, 32, "gpio4", DRV_TYPE_IO_1V8_OR_3V0,
DRV_TYPE_IO_1V8_3V0_AUTO,
DRV_TYPE_IO_1V8_OR_3V0,
DRV_TYPE_IO_1V8_OR_3V0
),
};
static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
.pin_banks = rk3399_pin_banks,
.nr_banks = ARRAY_SIZE(rk3399_pin_banks),
.label = "RK3399-GPIO",
.type = RK3399,
.grf_mux_offset = 0xe000,
.pmu_mux_offset = 0x0,
.grf_drv_offset = 0xe100,
.pmu_drv_offset = 0x80,
.iomux_routes = rk3399_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3399_mux_route_data),
.pull_calc_reg = rk3399_calc_pull_reg_and_bit,
.drv_calc_reg = rk3399_calc_drv_reg_and_bit,
};
static struct rockchip_pin_bank rk3568_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU | IOMUX_WIDTH_4BIT,
IOMUX_SOURCE_PMU | IOMUX_WIDTH_4BIT,
IOMUX_SOURCE_PMU | IOMUX_WIDTH_4BIT,
IOMUX_SOURCE_PMU | IOMUX_WIDTH_4BIT),
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT),
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT),
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT),
PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT,
IOMUX_WIDTH_4BIT),
};
static struct rockchip_pin_ctrl rk3568_pin_ctrl = {
.pin_banks = rk3568_pin_banks,
.nr_banks = ARRAY_SIZE(rk3568_pin_banks),
.label = "RK3568-GPIO",
.type = RK3568,
.grf_mux_offset = 0x0,
.pmu_mux_offset = 0x0,
.grf_drv_offset = 0x0200,
.pmu_drv_offset = 0x0070,
.iomux_routes = rk3568_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3568_mux_route_data),
.pull_calc_reg = rk3568_calc_pull_reg_and_bit,
.drv_calc_reg = rk3568_calc_drv_reg_and_bit,
.schmitt_calc_reg = rk3568_calc_schmitt_reg_and_bit,
};
static struct rockchip_pin_bank rk3588_pin_banks[] = {
RK3588_PIN_BANK_FLAGS(0, 32, "gpio0",
IOMUX_WIDTH_4BIT, PULL_TYPE_IO_1V8_ONLY),
RK3588_PIN_BANK_FLAGS(1, 32, "gpio1",
IOMUX_WIDTH_4BIT, PULL_TYPE_IO_1V8_ONLY),
RK3588_PIN_BANK_FLAGS(2, 32, "gpio2",
IOMUX_WIDTH_4BIT, PULL_TYPE_IO_1V8_ONLY),
RK3588_PIN_BANK_FLAGS(3, 32, "gpio3",
IOMUX_WIDTH_4BIT, PULL_TYPE_IO_1V8_ONLY),
RK3588_PIN_BANK_FLAGS(4, 32, "gpio4",
IOMUX_WIDTH_4BIT, PULL_TYPE_IO_1V8_ONLY),
};
static struct rockchip_pin_ctrl rk3588_pin_ctrl = {
.pin_banks = rk3588_pin_banks,
.nr_banks = ARRAY_SIZE(rk3588_pin_banks),
.label = "RK3588-GPIO",
.type = RK3588,
.pull_calc_reg = rk3588_calc_pull_reg_and_bit,
.drv_calc_reg = rk3588_calc_drv_reg_and_bit,
.schmitt_calc_reg = rk3588_calc_schmitt_reg_and_bit,
};
static const struct of_device_id rockchip_pinctrl_dt_match[] = {
{ .compatible = "rockchip,px30-pinctrl",
.data = &px30_pin_ctrl },
{ .compatible = "rockchip,rv1108-pinctrl",
.data = &rv1108_pin_ctrl },
{ .compatible = "rockchip,rv1126-pinctrl",
.data = &rv1126_pin_ctrl },
{ .compatible = "rockchip,rk2928-pinctrl",
.data = &rk2928_pin_ctrl },
{ .compatible = "rockchip,rk3036-pinctrl",
.data = &rk3036_pin_ctrl },
{ .compatible = "rockchip,rk3066a-pinctrl",
.data = &rk3066a_pin_ctrl },
{ .compatible = "rockchip,rk3066b-pinctrl",
.data = &rk3066b_pin_ctrl },
{ .compatible = "rockchip,rk3128-pinctrl",
.data = (void *)&rk3128_pin_ctrl },
{ .compatible = "rockchip,rk3188-pinctrl",
.data = &rk3188_pin_ctrl },
{ .compatible = "rockchip,rk3228-pinctrl",
.data = &rk3228_pin_ctrl },
{ .compatible = "rockchip,rk3288-pinctrl",
.data = &rk3288_pin_ctrl },
{ .compatible = "rockchip,rk3308-pinctrl",
.data = &rk3308_pin_ctrl },
{ .compatible = "rockchip,rk3328-pinctrl",
.data = &rk3328_pin_ctrl },
{ .compatible = "rockchip,rk3368-pinctrl",
.data = &rk3368_pin_ctrl },
{ .compatible = "rockchip,rk3399-pinctrl",
.data = &rk3399_pin_ctrl },
{ .compatible = "rockchip,rk3568-pinctrl",
.data = &rk3568_pin_ctrl },
{ .compatible = "rockchip,rk3588-pinctrl",
.data = &rk3588_pin_ctrl },
{},
};
static struct platform_driver rockchip_pinctrl_driver = {
.probe = rockchip_pinctrl_probe,
.remove = rockchip_pinctrl_remove,
.driver = {
.name = "rockchip-pinctrl",
.pm = &rockchip_pinctrl_dev_pm_ops,
.of_match_table = rockchip_pinctrl_dt_match,
},
};
static int __init rockchip_pinctrl_drv_register(void)
{
return platform_driver_register(&rockchip_pinctrl_driver);
}
postcore_initcall(rockchip_pinctrl_drv_register);
static void __exit rockchip_pinctrl_drv_unregister(void)
{
platform_driver_unregister(&rockchip_pinctrl_driver);
}
module_exit(rockchip_pinctrl_drv_unregister);
MODULE_DESCRIPTION("ROCKCHIP Pin Controller Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pinctrl-rockchip");
MODULE_DEVICE_TABLE(of, rockchip_pinctrl_dt_match);