linux/drivers/target/iscsi/iscsi_target_tpg.c

911 lines
22 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 14:55:06 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
/*******************************************************************************
* This file contains iSCSI Target Portal Group related functions.
*
* (c) Copyright 2007-2013 Datera, Inc.
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
*
* Author: Nicholas A. Bellinger <nab@linux-iscsi.org>
*
******************************************************************************/
#include <linux/slab.h>
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
#include <target/iscsi/iscsi_target_core.h>
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
#include "iscsi_target_erl0.h"
#include "iscsi_target_login.h"
#include "iscsi_target_nodeattrib.h"
#include "iscsi_target_tpg.h"
#include "iscsi_target_util.h"
#include "iscsi_target.h"
#include "iscsi_target_parameters.h"
#include <target/iscsi/iscsi_transport.h>
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
struct iscsi_portal_group *iscsit_alloc_portal_group(struct iscsi_tiqn *tiqn, u16 tpgt)
{
struct iscsi_portal_group *tpg;
tpg = kzalloc(sizeof(struct iscsi_portal_group), GFP_KERNEL);
if (!tpg) {
pr_err("Unable to allocate struct iscsi_portal_group\n");
return NULL;
}
tpg->tpgt = tpgt;
tpg->tpg_state = TPG_STATE_FREE;
tpg->tpg_tiqn = tiqn;
INIT_LIST_HEAD(&tpg->tpg_gnp_list);
INIT_LIST_HEAD(&tpg->tpg_list);
mutex_init(&tpg->tpg_access_lock);
sema_init(&tpg->np_login_sem, 1);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock_init(&tpg->tpg_state_lock);
spin_lock_init(&tpg->tpg_np_lock);
return tpg;
}
static void iscsit_set_default_tpg_attribs(struct iscsi_portal_group *);
int iscsit_load_discovery_tpg(void)
{
struct iscsi_param *param;
struct iscsi_portal_group *tpg;
int ret;
tpg = iscsit_alloc_portal_group(NULL, 1);
if (!tpg) {
pr_err("Unable to allocate struct iscsi_portal_group\n");
return -1;
}
/*
* Save iscsi_ops pointer for special case discovery TPG that
* doesn't exist as se_wwn->wwn_group within configfs.
*/
tpg->tpg_se_tpg.se_tpg_tfo = &iscsi_ops;
ret = core_tpg_register(NULL, &tpg->tpg_se_tpg, -1);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (ret < 0) {
kfree(tpg);
return -1;
}
tpg->sid = 1; /* First Assigned LIO Session ID */
iscsit_set_default_tpg_attribs(tpg);
if (iscsi_create_default_params(&tpg->param_list) < 0)
goto out;
/*
* By default we disable authentication for discovery sessions,
* this can be changed with:
*
* /sys/kernel/config/target/iscsi/discovery_auth/enforce_discovery_auth
*/
param = iscsi_find_param_from_key(AUTHMETHOD, tpg->param_list);
if (!param)
goto free_pl_out;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (iscsi_update_param_value(param, "CHAP,None") < 0)
goto free_pl_out;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
tpg->tpg_attrib.authentication = 0;
spin_lock(&tpg->tpg_state_lock);
tpg->tpg_state = TPG_STATE_ACTIVE;
spin_unlock(&tpg->tpg_state_lock);
iscsit_global->discovery_tpg = tpg;
pr_debug("CORE[0] - Allocated Discovery TPG\n");
return 0;
free_pl_out:
iscsi_release_param_list(tpg->param_list);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
out:
if (tpg->sid == 1)
core_tpg_deregister(&tpg->tpg_se_tpg);
kfree(tpg);
return -1;
}
void iscsit_release_discovery_tpg(void)
{
struct iscsi_portal_group *tpg = iscsit_global->discovery_tpg;
if (!tpg)
return;
iscsi_release_param_list(tpg->param_list);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
core_tpg_deregister(&tpg->tpg_se_tpg);
kfree(tpg);
iscsit_global->discovery_tpg = NULL;
}
struct iscsi_portal_group *iscsit_get_tpg_from_np(
struct iscsi_tiqn *tiqn,
iscsi-target: Add login negotiation multi-plexing support This patch adds support for login negotiation multi-plexing in iscsi-target code. This involves handling the first login request PDU + payload and login response PDU + payload within __iscsi_target_login_thread() process context, and then changing struct sock->sk_data_ready() so that all subsequent exchanges are handled by workqueue process context, to allow other incoming login requests to be received in parallel by __iscsi_target_login_thread(). Upon login negotiation completion (or failure), ->sk_data_ready() is replaced with the original kernel sockets handler saved in iscsi_conn->orig_data_ready. v3 changes: - Convert iscsi_target_sk_data_ready() lock access to write[lock,unlock]_bh() - Only clear LOGIN_FLAGS_READ_ACTIVE when iscsi_target_do_login() returns zero - Add LOGIN_FLAGS_READY + LOGIN_FLAGS_CLOSED bit checks to iscsi_target_sk_data_ready() - Make INIT_DELAYED_WORK() + iscsi_target_set_sock_callbacks() setup happen earlier by moving from iscsi_target_start_negotiation() into iscsi_target_locate_portal() - Set LOGIN_FLAGS_READY bit in iscsi_target_start_negotiation() after iscsi_target_do_login() returns zero. v2 changes: - Add login_timer in iscsi_target_do_login_rx() to avoid possible endless sleep with MSG_WAITALL for traditional iscsi-target in certain network configurations. - Convert lprintk() -> pr_debug() - Remove forward declarations of iscsi_target_set_sock_callbacks(), iscsi_target_restore_sock_callbacks() and iscsi_target_sk_data_ready() - Make iscsi_target_set_sock_callbacks + iscsi_target_restore_sock_callbacks() static (Fengguang) - Make iscsi_target_do_login_rx() safe for iser-target w/o conn->sock Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-08-16 04:40:17 +08:00
struct iscsi_np *np,
struct iscsi_tpg_np **tpg_np_out)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
{
struct iscsi_portal_group *tpg = NULL;
struct iscsi_tpg_np *tpg_np;
spin_lock(&tiqn->tiqn_tpg_lock);
list_for_each_entry(tpg, &tiqn->tiqn_tpg_list, tpg_list) {
spin_lock(&tpg->tpg_state_lock);
if (tpg->tpg_state != TPG_STATE_ACTIVE) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_unlock(&tpg->tpg_state_lock);
continue;
}
spin_unlock(&tpg->tpg_state_lock);
spin_lock(&tpg->tpg_np_lock);
list_for_each_entry(tpg_np, &tpg->tpg_gnp_list, tpg_np_list) {
if (tpg_np->tpg_np == np) {
iscsi-target: Add login negotiation multi-plexing support This patch adds support for login negotiation multi-plexing in iscsi-target code. This involves handling the first login request PDU + payload and login response PDU + payload within __iscsi_target_login_thread() process context, and then changing struct sock->sk_data_ready() so that all subsequent exchanges are handled by workqueue process context, to allow other incoming login requests to be received in parallel by __iscsi_target_login_thread(). Upon login negotiation completion (or failure), ->sk_data_ready() is replaced with the original kernel sockets handler saved in iscsi_conn->orig_data_ready. v3 changes: - Convert iscsi_target_sk_data_ready() lock access to write[lock,unlock]_bh() - Only clear LOGIN_FLAGS_READ_ACTIVE when iscsi_target_do_login() returns zero - Add LOGIN_FLAGS_READY + LOGIN_FLAGS_CLOSED bit checks to iscsi_target_sk_data_ready() - Make INIT_DELAYED_WORK() + iscsi_target_set_sock_callbacks() setup happen earlier by moving from iscsi_target_start_negotiation() into iscsi_target_locate_portal() - Set LOGIN_FLAGS_READY bit in iscsi_target_start_negotiation() after iscsi_target_do_login() returns zero. v2 changes: - Add login_timer in iscsi_target_do_login_rx() to avoid possible endless sleep with MSG_WAITALL for traditional iscsi-target in certain network configurations. - Convert lprintk() -> pr_debug() - Remove forward declarations of iscsi_target_set_sock_callbacks(), iscsi_target_restore_sock_callbacks() and iscsi_target_sk_data_ready() - Make iscsi_target_set_sock_callbacks + iscsi_target_restore_sock_callbacks() static (Fengguang) - Make iscsi_target_do_login_rx() safe for iser-target w/o conn->sock Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-08-16 04:40:17 +08:00
*tpg_np_out = tpg_np;
kref_get(&tpg_np->tpg_np_kref);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_unlock(&tpg->tpg_np_lock);
spin_unlock(&tiqn->tiqn_tpg_lock);
return tpg;
}
}
spin_unlock(&tpg->tpg_np_lock);
}
spin_unlock(&tiqn->tiqn_tpg_lock);
return NULL;
}
int iscsit_get_tpg(
struct iscsi_portal_group *tpg)
{
return mutex_lock_interruptible(&tpg->tpg_access_lock);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
void iscsit_put_tpg(struct iscsi_portal_group *tpg)
{
mutex_unlock(&tpg->tpg_access_lock);
}
static void iscsit_clear_tpg_np_login_thread(
struct iscsi_tpg_np *tpg_np,
struct iscsi_portal_group *tpg,
bool shutdown)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
{
if (!tpg_np->tpg_np) {
pr_err("struct iscsi_tpg_np->tpg_np is NULL!\n");
return;
}
if (shutdown)
tpg_np->tpg_np->enabled = false;
iscsit_reset_np_thread(tpg_np->tpg_np, tpg_np, tpg, shutdown);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
static void iscsit_clear_tpg_np_login_threads(
struct iscsi_portal_group *tpg,
bool shutdown)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
{
struct iscsi_tpg_np *tpg_np;
spin_lock(&tpg->tpg_np_lock);
list_for_each_entry(tpg_np, &tpg->tpg_gnp_list, tpg_np_list) {
if (!tpg_np->tpg_np) {
pr_err("struct iscsi_tpg_np->tpg_np is NULL!\n");
continue;
}
spin_unlock(&tpg->tpg_np_lock);
iscsit_clear_tpg_np_login_thread(tpg_np, tpg, shutdown);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock(&tpg->tpg_np_lock);
}
spin_unlock(&tpg->tpg_np_lock);
}
void iscsit_tpg_dump_params(struct iscsi_portal_group *tpg)
{
iscsi_print_params(tpg->param_list);
}
static void iscsit_set_default_tpg_attribs(struct iscsi_portal_group *tpg)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
a->authentication = TA_AUTHENTICATION;
a->login_timeout = TA_LOGIN_TIMEOUT;
a->netif_timeout = TA_NETIF_TIMEOUT;
a->default_cmdsn_depth = TA_DEFAULT_CMDSN_DEPTH;
a->generate_node_acls = TA_GENERATE_NODE_ACLS;
a->cache_dynamic_acls = TA_CACHE_DYNAMIC_ACLS;
a->demo_mode_write_protect = TA_DEMO_MODE_WRITE_PROTECT;
a->prod_mode_write_protect = TA_PROD_MODE_WRITE_PROTECT;
a->demo_mode_discovery = TA_DEMO_MODE_DISCOVERY;
a->default_erl = TA_DEFAULT_ERL;
a->t10_pi = TA_DEFAULT_T10_PI;
a->fabric_prot_type = TA_DEFAULT_FABRIC_PROT_TYPE;
a->tpg_enabled_sendtargets = TA_DEFAULT_TPG_ENABLED_SENDTARGETS;
a->login_keys_workaround = TA_DEFAULT_LOGIN_KEYS_WORKAROUND;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
int iscsit_tpg_add_portal_group(struct iscsi_tiqn *tiqn, struct iscsi_portal_group *tpg)
{
if (tpg->tpg_state != TPG_STATE_FREE) {
pr_err("Unable to add iSCSI Target Portal Group: %d"
" while not in TPG_STATE_FREE state.\n", tpg->tpgt);
return -EEXIST;
}
iscsit_set_default_tpg_attribs(tpg);
if (iscsi_create_default_params(&tpg->param_list) < 0)
goto err_out;
tpg->tpg_attrib.tpg = tpg;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock(&tpg->tpg_state_lock);
tpg->tpg_state = TPG_STATE_INACTIVE;
spin_unlock(&tpg->tpg_state_lock);
spin_lock(&tiqn->tiqn_tpg_lock);
list_add_tail(&tpg->tpg_list, &tiqn->tiqn_tpg_list);
tiqn->tiqn_ntpgs++;
pr_debug("CORE[%s]_TPG[%hu] - Added iSCSI Target Portal Group\n",
tiqn->tiqn, tpg->tpgt);
spin_unlock(&tiqn->tiqn_tpg_lock);
return 0;
err_out:
if (tpg->param_list) {
iscsi_release_param_list(tpg->param_list);
tpg->param_list = NULL;
}
return -ENOMEM;
}
int iscsit_tpg_del_portal_group(
struct iscsi_tiqn *tiqn,
struct iscsi_portal_group *tpg,
int force)
{
u8 old_state = tpg->tpg_state;
spin_lock(&tpg->tpg_state_lock);
tpg->tpg_state = TPG_STATE_INACTIVE;
spin_unlock(&tpg->tpg_state_lock);
if (iscsit_release_sessions_for_tpg(tpg, force) < 0) {
pr_err("Unable to delete iSCSI Target Portal Group:"
" %hu while active sessions exist, and force=0\n",
tpg->tpgt);
tpg->tpg_state = old_state;
return -EPERM;
}
if (tpg->param_list) {
iscsi_release_param_list(tpg->param_list);
tpg->param_list = NULL;
}
core_tpg_deregister(&tpg->tpg_se_tpg);
spin_lock(&tpg->tpg_state_lock);
tpg->tpg_state = TPG_STATE_FREE;
spin_unlock(&tpg->tpg_state_lock);
spin_lock(&tiqn->tiqn_tpg_lock);
tiqn->tiqn_ntpgs--;
list_del(&tpg->tpg_list);
spin_unlock(&tiqn->tiqn_tpg_lock);
pr_debug("CORE[%s]_TPG[%hu] - Deleted iSCSI Target Portal Group\n",
tiqn->tiqn, tpg->tpgt);
kfree(tpg);
return 0;
}
int iscsit_tpg_enable_portal_group(struct iscsi_portal_group *tpg)
{
struct iscsi_param *param;
struct iscsi_tiqn *tiqn = tpg->tpg_tiqn;
int ret;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (tpg->tpg_state == TPG_STATE_ACTIVE) {
pr_err("iSCSI target portal group: %hu is already"
" active, ignoring request.\n", tpg->tpgt);
return -EINVAL;
}
/*
* Make sure that AuthMethod does not contain None as an option
* unless explictly disabled. Set the default to CHAP if authentication
* is enforced (as per default), and remove the NONE option.
*/
param = iscsi_find_param_from_key(AUTHMETHOD, tpg->param_list);
if (!param)
return -EINVAL;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (tpg->tpg_attrib.authentication) {
if (!strcmp(param->value, NONE)) {
ret = iscsi_update_param_value(param, CHAP);
if (ret)
goto err;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
ret = iscsit_ta_authentication(tpg, 1);
if (ret < 0)
goto err;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
spin_lock(&tpg->tpg_state_lock);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
tpg->tpg_state = TPG_STATE_ACTIVE;
spin_unlock(&tpg->tpg_state_lock);
spin_lock(&tiqn->tiqn_tpg_lock);
tiqn->tiqn_active_tpgs++;
pr_debug("iSCSI_TPG[%hu] - Enabled iSCSI Target Portal Group\n",
tpg->tpgt);
spin_unlock(&tiqn->tiqn_tpg_lock);
return 0;
err:
return ret;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
int iscsit_tpg_disable_portal_group(struct iscsi_portal_group *tpg, int force)
{
struct iscsi_tiqn *tiqn;
u8 old_state = tpg->tpg_state;
spin_lock(&tpg->tpg_state_lock);
if (tpg->tpg_state == TPG_STATE_INACTIVE) {
pr_err("iSCSI Target Portal Group: %hu is already"
" inactive, ignoring request.\n", tpg->tpgt);
spin_unlock(&tpg->tpg_state_lock);
return -EINVAL;
}
tpg->tpg_state = TPG_STATE_INACTIVE;
spin_unlock(&tpg->tpg_state_lock);
iscsit_clear_tpg_np_login_threads(tpg, false);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (iscsit_release_sessions_for_tpg(tpg, force) < 0) {
spin_lock(&tpg->tpg_state_lock);
tpg->tpg_state = old_state;
spin_unlock(&tpg->tpg_state_lock);
pr_err("Unable to disable iSCSI Target Portal Group:"
" %hu while active sessions exist, and force=0\n",
tpg->tpgt);
return -EPERM;
}
tiqn = tpg->tpg_tiqn;
if (!tiqn || (tpg == iscsit_global->discovery_tpg))
return 0;
spin_lock(&tiqn->tiqn_tpg_lock);
tiqn->tiqn_active_tpgs--;
pr_debug("iSCSI_TPG[%hu] - Disabled iSCSI Target Portal Group\n",
tpg->tpgt);
spin_unlock(&tiqn->tiqn_tpg_lock);
return 0;
}
struct iscsi_node_attrib *iscsit_tpg_get_node_attrib(
struct iscsi_session *sess)
{
struct se_session *se_sess = sess->se_sess;
struct se_node_acl *se_nacl = se_sess->se_node_acl;
struct iscsi_node_acl *acl = container_of(se_nacl, struct iscsi_node_acl,
se_node_acl);
return &acl->node_attrib;
}
struct iscsi_tpg_np *iscsit_tpg_locate_child_np(
struct iscsi_tpg_np *tpg_np,
int network_transport)
{
struct iscsi_tpg_np *tpg_np_child, *tpg_np_child_tmp;
spin_lock(&tpg_np->tpg_np_parent_lock);
list_for_each_entry_safe(tpg_np_child, tpg_np_child_tmp,
&tpg_np->tpg_np_parent_list, tpg_np_child_list) {
if (tpg_np_child->tpg_np->np_network_transport ==
network_transport) {
spin_unlock(&tpg_np->tpg_np_parent_lock);
return tpg_np_child;
}
}
spin_unlock(&tpg_np->tpg_np_parent_lock);
return NULL;
}
static bool iscsit_tpg_check_network_portal(
struct iscsi_tiqn *tiqn,
struct sockaddr_storage *sockaddr,
int network_transport)
{
struct iscsi_portal_group *tpg;
struct iscsi_tpg_np *tpg_np;
struct iscsi_np *np;
bool match = false;
spin_lock(&tiqn->tiqn_tpg_lock);
list_for_each_entry(tpg, &tiqn->tiqn_tpg_list, tpg_list) {
spin_lock(&tpg->tpg_np_lock);
list_for_each_entry(tpg_np, &tpg->tpg_gnp_list, tpg_np_list) {
np = tpg_np->tpg_np;
match = iscsit_check_np_match(sockaddr, np,
network_transport);
if (match)
break;
}
spin_unlock(&tpg->tpg_np_lock);
}
spin_unlock(&tiqn->tiqn_tpg_lock);
return match;
}
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
struct iscsi_tpg_np *iscsit_tpg_add_network_portal(
struct iscsi_portal_group *tpg,
struct sockaddr_storage *sockaddr,
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
struct iscsi_tpg_np *tpg_np_parent,
int network_transport)
{
struct iscsi_np *np;
struct iscsi_tpg_np *tpg_np;
if (!tpg_np_parent) {
if (iscsit_tpg_check_network_portal(tpg->tpg_tiqn, sockaddr,
network_transport)) {
pr_err("Network Portal: %pISc already exists on a"
" different TPG on %s\n", sockaddr,
tpg->tpg_tiqn->tiqn);
return ERR_PTR(-EEXIST);
}
}
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
tpg_np = kzalloc(sizeof(struct iscsi_tpg_np), GFP_KERNEL);
if (!tpg_np) {
pr_err("Unable to allocate memory for"
" struct iscsi_tpg_np.\n");
return ERR_PTR(-ENOMEM);
}
np = iscsit_add_np(sockaddr, network_transport);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (IS_ERR(np)) {
kfree(tpg_np);
return ERR_CAST(np);
}
INIT_LIST_HEAD(&tpg_np->tpg_np_list);
INIT_LIST_HEAD(&tpg_np->tpg_np_child_list);
INIT_LIST_HEAD(&tpg_np->tpg_np_parent_list);
spin_lock_init(&tpg_np->tpg_np_parent_lock);
iscsi-target: Add login negotiation multi-plexing support This patch adds support for login negotiation multi-plexing in iscsi-target code. This involves handling the first login request PDU + payload and login response PDU + payload within __iscsi_target_login_thread() process context, and then changing struct sock->sk_data_ready() so that all subsequent exchanges are handled by workqueue process context, to allow other incoming login requests to be received in parallel by __iscsi_target_login_thread(). Upon login negotiation completion (or failure), ->sk_data_ready() is replaced with the original kernel sockets handler saved in iscsi_conn->orig_data_ready. v3 changes: - Convert iscsi_target_sk_data_ready() lock access to write[lock,unlock]_bh() - Only clear LOGIN_FLAGS_READ_ACTIVE when iscsi_target_do_login() returns zero - Add LOGIN_FLAGS_READY + LOGIN_FLAGS_CLOSED bit checks to iscsi_target_sk_data_ready() - Make INIT_DELAYED_WORK() + iscsi_target_set_sock_callbacks() setup happen earlier by moving from iscsi_target_start_negotiation() into iscsi_target_locate_portal() - Set LOGIN_FLAGS_READY bit in iscsi_target_start_negotiation() after iscsi_target_do_login() returns zero. v2 changes: - Add login_timer in iscsi_target_do_login_rx() to avoid possible endless sleep with MSG_WAITALL for traditional iscsi-target in certain network configurations. - Convert lprintk() -> pr_debug() - Remove forward declarations of iscsi_target_set_sock_callbacks(), iscsi_target_restore_sock_callbacks() and iscsi_target_sk_data_ready() - Make iscsi_target_set_sock_callbacks + iscsi_target_restore_sock_callbacks() static (Fengguang) - Make iscsi_target_do_login_rx() safe for iser-target w/o conn->sock Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-08-16 04:40:17 +08:00
init_completion(&tpg_np->tpg_np_comp);
kref_init(&tpg_np->tpg_np_kref);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
tpg_np->tpg_np = np;
tpg_np->tpg = tpg;
spin_lock(&tpg->tpg_np_lock);
list_add_tail(&tpg_np->tpg_np_list, &tpg->tpg_gnp_list);
tpg->num_tpg_nps++;
if (tpg->tpg_tiqn)
tpg->tpg_tiqn->tiqn_num_tpg_nps++;
spin_unlock(&tpg->tpg_np_lock);
if (tpg_np_parent) {
tpg_np->tpg_np_parent = tpg_np_parent;
spin_lock(&tpg_np_parent->tpg_np_parent_lock);
list_add_tail(&tpg_np->tpg_np_child_list,
&tpg_np_parent->tpg_np_parent_list);
spin_unlock(&tpg_np_parent->tpg_np_parent_lock);
}
pr_debug("CORE[%s] - Added Network Portal: %pISpc,%hu on %s\n",
tpg->tpg_tiqn->tiqn, &np->np_sockaddr, tpg->tpgt,
np->np_transport->name);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return tpg_np;
}
static int iscsit_tpg_release_np(
struct iscsi_tpg_np *tpg_np,
struct iscsi_portal_group *tpg,
struct iscsi_np *np)
{
iscsit_clear_tpg_np_login_thread(tpg_np, tpg, true);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
pr_debug("CORE[%s] - Removed Network Portal: %pISpc,%hu on %s\n",
tpg->tpg_tiqn->tiqn, &np->np_sockaddr, tpg->tpgt,
np->np_transport->name);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
tpg_np->tpg_np = NULL;
tpg_np->tpg = NULL;
kfree(tpg_np);
/*
* iscsit_del_np() will shutdown struct iscsi_np when last TPG reference is released.
*/
return iscsit_del_np(np);
}
int iscsit_tpg_del_network_portal(
struct iscsi_portal_group *tpg,
struct iscsi_tpg_np *tpg_np)
{
struct iscsi_np *np;
struct iscsi_tpg_np *tpg_np_child, *tpg_np_child_tmp;
int ret = 0;
np = tpg_np->tpg_np;
if (!np) {
pr_err("Unable to locate struct iscsi_np from"
" struct iscsi_tpg_np\n");
return -EINVAL;
}
if (!tpg_np->tpg_np_parent) {
/*
* We are the parent tpg network portal. Release all of the
* child tpg_np's (eg: the non ISCSI_TCP ones) on our parent
* list first.
*/
list_for_each_entry_safe(tpg_np_child, tpg_np_child_tmp,
&tpg_np->tpg_np_parent_list,
tpg_np_child_list) {
ret = iscsit_tpg_del_network_portal(tpg, tpg_np_child);
if (ret < 0)
pr_err("iscsit_tpg_del_network_portal()"
" failed: %d\n", ret);
}
} else {
/*
* We are not the parent ISCSI_TCP tpg network portal. Release
* our own network portals from the child list.
*/
spin_lock(&tpg_np->tpg_np_parent->tpg_np_parent_lock);
list_del(&tpg_np->tpg_np_child_list);
spin_unlock(&tpg_np->tpg_np_parent->tpg_np_parent_lock);
}
spin_lock(&tpg->tpg_np_lock);
list_del(&tpg_np->tpg_np_list);
tpg->num_tpg_nps--;
if (tpg->tpg_tiqn)
tpg->tpg_tiqn->tiqn_num_tpg_nps--;
spin_unlock(&tpg->tpg_np_lock);
return iscsit_tpg_release_np(tpg_np, tpg, np);
}
int iscsit_ta_authentication(struct iscsi_portal_group *tpg, u32 authentication)
{
unsigned char buf1[256], buf2[256], *none = NULL;
int len;
struct iscsi_param *param;
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((authentication != 1) && (authentication != 0)) {
pr_err("Illegal value for authentication parameter:"
" %u, ignoring request.\n", authentication);
return -EINVAL;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
memset(buf1, 0, sizeof(buf1));
memset(buf2, 0, sizeof(buf2));
param = iscsi_find_param_from_key(AUTHMETHOD, tpg->param_list);
if (!param)
return -EINVAL;
if (authentication) {
snprintf(buf1, sizeof(buf1), "%s", param->value);
none = strstr(buf1, NONE);
if (!none)
goto out;
if (!strncmp(none + 4, ",", 1)) {
if (!strcmp(buf1, none))
sprintf(buf2, "%s", none+5);
else {
none--;
*none = '\0';
len = sprintf(buf2, "%s", buf1);
none += 5;
sprintf(buf2 + len, "%s", none);
}
} else {
none--;
*none = '\0';
sprintf(buf2, "%s", buf1);
}
if (iscsi_update_param_value(param, buf2) < 0)
return -EINVAL;
} else {
snprintf(buf1, sizeof(buf1), "%s", param->value);
none = strstr(buf1, NONE);
if (none)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
goto out;
strlcat(buf1, "," NONE, sizeof(buf1));
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (iscsi_update_param_value(param, buf1) < 0)
return -EINVAL;
}
out:
a->authentication = authentication;
pr_debug("%s iSCSI Authentication Methods for TPG: %hu.\n",
a->authentication ? "Enforcing" : "Disabling", tpg->tpgt);
return 0;
}
int iscsit_ta_login_timeout(
struct iscsi_portal_group *tpg,
u32 login_timeout)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if (login_timeout > TA_LOGIN_TIMEOUT_MAX) {
pr_err("Requested Login Timeout %u larger than maximum"
" %u\n", login_timeout, TA_LOGIN_TIMEOUT_MAX);
return -EINVAL;
} else if (login_timeout < TA_LOGIN_TIMEOUT_MIN) {
pr_err("Requested Logout Timeout %u smaller than"
" minimum %u\n", login_timeout, TA_LOGIN_TIMEOUT_MIN);
return -EINVAL;
}
a->login_timeout = login_timeout;
pr_debug("Set Logout Timeout to %u for Target Portal Group"
" %hu\n", a->login_timeout, tpg->tpgt);
return 0;
}
int iscsit_ta_netif_timeout(
struct iscsi_portal_group *tpg,
u32 netif_timeout)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if (netif_timeout > TA_NETIF_TIMEOUT_MAX) {
pr_err("Requested Network Interface Timeout %u larger"
" than maximum %u\n", netif_timeout,
TA_NETIF_TIMEOUT_MAX);
return -EINVAL;
} else if (netif_timeout < TA_NETIF_TIMEOUT_MIN) {
pr_err("Requested Network Interface Timeout %u smaller"
" than minimum %u\n", netif_timeout,
TA_NETIF_TIMEOUT_MIN);
return -EINVAL;
}
a->netif_timeout = netif_timeout;
pr_debug("Set Network Interface Timeout to %u for"
" Target Portal Group %hu\n", a->netif_timeout, tpg->tpgt);
return 0;
}
int iscsit_ta_generate_node_acls(
struct iscsi_portal_group *tpg,
u32 flag)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((flag != 0) && (flag != 1)) {
pr_err("Illegal value %d\n", flag);
return -EINVAL;
}
a->generate_node_acls = flag;
pr_debug("iSCSI_TPG[%hu] - Generate Initiator Portal Group ACLs: %s\n",
tpg->tpgt, (a->generate_node_acls) ? "Enabled" : "Disabled");
if (flag == 1 && a->cache_dynamic_acls == 0) {
pr_debug("Explicitly setting cache_dynamic_acls=1 when "
"generate_node_acls=1\n");
a->cache_dynamic_acls = 1;
}
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return 0;
}
int iscsit_ta_default_cmdsn_depth(
struct iscsi_portal_group *tpg,
u32 tcq_depth)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if (tcq_depth > TA_DEFAULT_CMDSN_DEPTH_MAX) {
pr_err("Requested Default Queue Depth: %u larger"
" than maximum %u\n", tcq_depth,
TA_DEFAULT_CMDSN_DEPTH_MAX);
return -EINVAL;
} else if (tcq_depth < TA_DEFAULT_CMDSN_DEPTH_MIN) {
pr_err("Requested Default Queue Depth: %u smaller"
" than minimum %u\n", tcq_depth,
TA_DEFAULT_CMDSN_DEPTH_MIN);
return -EINVAL;
}
a->default_cmdsn_depth = tcq_depth;
pr_debug("iSCSI_TPG[%hu] - Set Default CmdSN TCQ Depth to %u\n",
tpg->tpgt, a->default_cmdsn_depth);
return 0;
}
int iscsit_ta_cache_dynamic_acls(
struct iscsi_portal_group *tpg,
u32 flag)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((flag != 0) && (flag != 1)) {
pr_err("Illegal value %d\n", flag);
return -EINVAL;
}
if (a->generate_node_acls == 1 && flag == 0) {
pr_debug("Skipping cache_dynamic_acls=0 when"
" generate_node_acls=1\n");
return 0;
}
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
a->cache_dynamic_acls = flag;
pr_debug("iSCSI_TPG[%hu] - Cache Dynamic Initiator Portal Group"
" ACLs %s\n", tpg->tpgt, (a->cache_dynamic_acls) ?
"Enabled" : "Disabled");
return 0;
}
int iscsit_ta_demo_mode_write_protect(
struct iscsi_portal_group *tpg,
u32 flag)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((flag != 0) && (flag != 1)) {
pr_err("Illegal value %d\n", flag);
return -EINVAL;
}
a->demo_mode_write_protect = flag;
pr_debug("iSCSI_TPG[%hu] - Demo Mode Write Protect bit: %s\n",
tpg->tpgt, (a->demo_mode_write_protect) ? "ON" : "OFF");
return 0;
}
int iscsit_ta_prod_mode_write_protect(
struct iscsi_portal_group *tpg,
u32 flag)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((flag != 0) && (flag != 1)) {
pr_err("Illegal value %d\n", flag);
return -EINVAL;
}
a->prod_mode_write_protect = flag;
pr_debug("iSCSI_TPG[%hu] - Production Mode Write Protect bit:"
" %s\n", tpg->tpgt, (a->prod_mode_write_protect) ?
"ON" : "OFF");
return 0;
}
int iscsit_ta_demo_mode_discovery(
struct iscsi_portal_group *tpg,
u32 flag)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((flag != 0) && (flag != 1)) {
pr_err("Illegal value %d\n", flag);
return -EINVAL;
}
a->demo_mode_discovery = flag;
pr_debug("iSCSI_TPG[%hu] - Demo Mode Discovery bit:"
" %s\n", tpg->tpgt, (a->demo_mode_discovery) ?
"ON" : "OFF");
return 0;
}
int iscsit_ta_default_erl(
struct iscsi_portal_group *tpg,
u32 default_erl)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((default_erl != 0) && (default_erl != 1) && (default_erl != 2)) {
pr_err("Illegal value for default_erl: %u\n", default_erl);
return -EINVAL;
}
a->default_erl = default_erl;
pr_debug("iSCSI_TPG[%hu] - DefaultERL: %u\n", tpg->tpgt, a->default_erl);
return 0;
}
int iscsit_ta_t10_pi(
struct iscsi_portal_group *tpg,
u32 flag)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((flag != 0) && (flag != 1)) {
pr_err("Illegal value %d\n", flag);
return -EINVAL;
}
a->t10_pi = flag;
pr_debug("iSCSI_TPG[%hu] - T10 Protection information bit:"
" %s\n", tpg->tpgt, (a->t10_pi) ?
"ON" : "OFF");
return 0;
}
int iscsit_ta_fabric_prot_type(
struct iscsi_portal_group *tpg,
u32 prot_type)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((prot_type != 0) && (prot_type != 1) && (prot_type != 3)) {
pr_err("Illegal value for fabric_prot_type: %u\n", prot_type);
return -EINVAL;
}
a->fabric_prot_type = prot_type;
pr_debug("iSCSI_TPG[%hu] - T10 Fabric Protection Type: %u\n",
tpg->tpgt, prot_type);
return 0;
}
int iscsit_ta_tpg_enabled_sendtargets(
struct iscsi_portal_group *tpg,
u32 flag)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((flag != 0) && (flag != 1)) {
pr_err("Illegal value %d\n", flag);
return -EINVAL;
}
a->tpg_enabled_sendtargets = flag;
pr_debug("iSCSI_TPG[%hu] - TPG enabled bit required for SendTargets:"
" %s\n", tpg->tpgt, (a->tpg_enabled_sendtargets) ? "ON" : "OFF");
return 0;
}
int iscsit_ta_login_keys_workaround(
struct iscsi_portal_group *tpg,
u32 flag)
{
struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
if ((flag != 0) && (flag != 1)) {
pr_err("Illegal value %d\n", flag);
return -EINVAL;
}
a->login_keys_workaround = flag;
pr_debug("iSCSI_TPG[%hu] - TPG enabled bit for login keys workaround: %s ",
tpg->tpgt, (a->login_keys_workaround) ? "ON" : "OFF");
return 0;
}