korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-18 09:44:18 +08:00
Code Issues Packages Projects Releases Wiki Activity
7ca92b8f5a
linux/sound/soc/atmel/Kconfig

55 lines
1.7 KiB
Plaintext
Raw Normal View History

ASoC: Merge AT91 and AVR32 support into a single atmel architecture The Ateml AT91 and AVR32 SoC share common IP for audio and can share the same driver code using the atmel-ssc API provided for both architectures. Do this, creating a new unified atmel ASoC architecture to replace the previous at32 and at91 ones. [This was contributed as a patch series for reviewability but has been squashed down to a single commit to help preserve both the history and bisectability. A small bugfix from Jukka is included.] Tested-by: Jukka Hynninen <ext-jukka.hynninen@vaisala.com> Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-10-03 22:57:50 +08:00
config SND_ATMEL_SOC
tristate "SoC Audio for the Atmel System-on-Chip"
ASoC: atmel-soc: make it buildable on other architectures Not very useful on non AT91/AVR32 platforms but it provides more build coverage and prepares for ARM multiplatform. Also fixes a couple of format type warnings. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-08 21:23:22 +08:00
depends on HAS_IOMEM
ASoC: Merge AT91 and AVR32 support into a single atmel architecture The Ateml AT91 and AVR32 SoC share common IP for audio and can share the same driver code using the atmel-ssc API provided for both architectures. Do this, creating a new unified atmel ASoC architecture to replace the previous at32 and at91 ones. [This was contributed as a patch series for reviewability but has been squashed down to a single commit to help preserve both the history and bisectability. A small bugfix from Jukka is included.] Tested-by: Jukka Hynninen <ext-jukka.hynninen@vaisala.com> Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-10-03 22:57:50 +08:00
help
Say Y or M if you want to add support for codecs attached to
the ATMEL SSC interface. You will also need
to select the audio interfaces to support below.
ASoC: atmel-pcm: split into two file This patch is split original atmel-pcm.c into new atmel-pcm.c and atmel-pcm-pdc.c two files. The new atmel-pcm.c is the share routine while will be used for pdc or dma transfer. Using SND_ATMEL_SOC_PDC to select using PDC for audio transfer Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28 11:46:12 +08:00
config SND_ATMEL_SOC_PDC
tristate
depends on SND_ATMEL_SOC
ASoC: atmel-pcm: dma support based on pcm dmaengine Specify overrun bit in interrupt mask Add dmaengine specific routines Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [voice.shen@atmel.com: adapt to soc dmaengine framework] Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28 11:46:13 +08:00
config SND_ATMEL_SOC_DMA
tristate
depends on SND_ATMEL_SOC
ASoC: atmel-pcm: use generic dmaengine framework Align atmel pcm to use ASoC generic dmaengine framework DMA is fully device tree based Signed-off-by: Bo Shen <voice.shen@atmel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-03 16:38:00 +08:00
select SND_SOC_GENERIC_DMAENGINE_PCM
ASoC: atmel-pcm: dma support based on pcm dmaengine Specify overrun bit in interrupt mask Add dmaengine specific routines Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [voice.shen@atmel.com: adapt to soc dmaengine framework] Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28 11:46:13 +08:00
ASoC: Merge AT91 and AVR32 support into a single atmel architecture The Ateml AT91 and AVR32 SoC share common IP for audio and can share the same driver code using the atmel-ssc API provided for both architectures. Do this, creating a new unified atmel ASoC architecture to replace the previous at32 and at91 ones. [This was contributed as a patch series for reviewability but has been squashed down to a single commit to help preserve both the history and bisectability. A small bugfix from Jukka is included.] Tested-by: Jukka Hynninen <ext-jukka.hynninen@vaisala.com> Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-10-03 22:57:50 +08:00
config SND_ATMEL_SOC_SSC
tristate
depends on SND_ATMEL_SOC
help
Say Y or M if you want to add support for codecs the
ATMEL SSC interface. You will also needs to select the individual
machine drivers to support below.
config SND_AT91_SOC_SAM9G20_WM8731
tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
ASoC: atmel: Add dependency to SND_SOC_I2C_AND_SPI where necessary The SND_AT91_SOC_SAM9G20_WM8731 and SND_AT91_SOC_SAM9X5_WM8731 machine driver symbols select SND_SOC_WM8731 which depends on SND_SOC_I2C_AND_SPI. So the machine driver symbols need to depend on SND_SOC_I2C_AND_SPI as well, otherwise we might end up with a invalid configuration, which will sooner or later upset the randconfig auto-builders. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-11 17:16:18 +08:00
depends on ARCH_AT91 && ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
ASoC: atmel-pcm: split into two file This patch is split original atmel-pcm.c into new atmel-pcm.c and atmel-pcm-pdc.c two files. The new atmel-pcm.c is the share routine while will be used for pdc or dma transfer. Using SND_ATMEL_SOC_PDC to select using PDC for audio transfer Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28 11:46:12 +08:00
select SND_ATMEL_SOC_PDC
ASoC: Merge AT91 and AVR32 support into a single atmel architecture The Ateml AT91 and AVR32 SoC share common IP for audio and can share the same driver code using the atmel-ssc API provided for both architectures. Do this, creating a new unified atmel ASoC architecture to replace the previous at32 and at91 ones. [This was contributed as a patch series for reviewability but has been squashed down to a single commit to help preserve both the history and bisectability. A small bugfix from Jukka is included.] Tested-by: Jukka Hynninen <ext-jukka.hynninen@vaisala.com> Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-10-03 22:57:50 +08:00
select SND_ATMEL_SOC_SSC
select SND_SOC_WM8731
help
Say Y if you want to add support for SoC audio on WM8731-based
AT91sam9g20 evaluation board.
ASoC: atmel: add wm8904 based audio machine driver Add wm8904 based audio machine driver for Atmel EK board The following ek board based on it - at91sam9n12ek - sama5d3xek (d31, d33, d34, d35) Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19 17:42:57 +08:00
config SND_ATMEL_SOC_WM8904
tristate "Atmel ASoC driver for boards using WM8904 codec"
ASoC: atmel: Atmel WM8904 codec support needs I2C The WM8904 codec driver needs I2C to be enabled, so the SND_ATMEL_SOC_WM8904 option also requires this. Found using randconfig build testing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-29 19:18:33 +08:00
depends on ARCH_AT91 && ATMEL_SSC && SND_ATMEL_SOC && I2C
ASoC: atmel: add wm8904 based audio machine driver Add wm8904 based audio machine driver for Atmel EK board The following ek board based on it - at91sam9n12ek - sama5d3xek (d31, d33, d34, d35) Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19 17:42:57 +08:00
select SND_ATMEL_SOC_SSC
select SND_ATMEL_SOC_DMA
select SND_SOC_WM8904
help
Say Y if you want to add support for Atmel ASoC driver for boards using
WM8904 codec.
ASoC: atmel: machine driver for at91sam9x5-wm8731 boards Description of the Asoc machine driver for an at91sam9x5 based board with a wm8731 audio DAC. Wm8731 is clocked by a crystal and used as a master on the SSC/I2S interface. Its connections are a headphone jack and an Line input jack. [Richard: this is based on an old patch from Nicolas that I forward ported and reworked to use only device tree] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 18:32:03 +08:00
config SND_AT91_SOC_SAM9X5_WM8731
tristate "SoC Audio support for WM8731-based at91sam9x5 board"
ASoC: atmel: Add dependency to SND_SOC_I2C_AND_SPI where necessary The SND_AT91_SOC_SAM9G20_WM8731 and SND_AT91_SOC_SAM9X5_WM8731 machine driver symbols select SND_SOC_WM8731 which depends on SND_SOC_I2C_AND_SPI. So the machine driver symbols need to depend on SND_SOC_I2C_AND_SPI as well, otherwise we might end up with a invalid configuration, which will sooner or later upset the randconfig auto-builders. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-11 17:16:18 +08:00
depends on ARCH_AT91 && ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
ASoC: atmel: machine driver for at91sam9x5-wm8731 boards Description of the Asoc machine driver for an at91sam9x5 based board with a wm8731 audio DAC. Wm8731 is clocked by a crystal and used as a master on the SSC/I2S interface. Its connections are a headphone jack and an Line input jack. [Richard: this is based on an old patch from Nicolas that I forward ported and reworked to use only device tree] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 18:32:03 +08:00
select SND_ATMEL_SOC_SSC
select SND_ATMEL_SOC_DMA
select SND_SOC_WM8731
help
Say Y if you want to add support for audio SoC on an
at91sam9x5 based board that is using WM8731 codec.
Reference in New Issue Copy Permalink