linux/arch/arm/mach-exynos/firmware.c

253 lines
5.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
//
// Copyright (C) 2012 Samsung Electronics.
// Kyungmin Park <kyungmin.park@samsung.com>
// Tomasz Figa <t.figa@samsung.com>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/firmware.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/suspend.h>
#include "common.h"
#include "smc.h"
#define EXYNOS_BOOT_ADDR 0x8
#define EXYNOS_BOOT_FLAG 0xc
static void exynos_save_cp15(void)
{
/* Save Power control and Diagnostic registers */
asm ("mrc p15, 0, %0, c15, c0, 0\n"
"mrc p15, 0, %1, c15, c0, 1\n"
: "=r" (cp15_save_power), "=r" (cp15_save_diag)
: : "cc");
}
static int exynos_do_idle(unsigned long mode)
{
switch (mode) {
case FW_DO_IDLE_AFTR:
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_save_cp15();
writel_relaxed(__pa_symbol(exynos_cpu_resume_ns),
sysram_ns_base_addr + 0x24);
writel_relaxed(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
if (soc_is_exynos3250()) {
flush_cache_all();
exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
SMC_POWERSTATE_IDLE, 0);
exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER,
SMC_POWERSTATE_IDLE, 0);
} else
exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0);
break;
case FW_DO_IDLE_SLEEP:
exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
}
return 0;
}
static int exynos_cpu_boot(int cpu)
{
/*
* Exynos3250 doesn't need to send smc command for secondary CPU boot
* because Exynos3250 removes WFE in secure mode.
*/
if (soc_is_exynos3250())
return 0;
/*
* The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
*/
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
return 0;
}
static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
{
void __iomem *boot_reg;
if (!sysram_ns_base_addr)
return -ENODEV;
Samsung Exynos updates for 3.16 - add new SoCs support : exynos3250, 5260, 5410 and 5800 - enable multi-platform on exynos : consolidate exynos related Kconfig entries Note that this requires tags/samsung-cleanup and tags/samsung-clk-2 because of mostly migration exynos specific macros into mach-exynos and exynos related Kconfig entries. One more merge conflict happens in arch/arm/Kconfig for ARCH_EXYNOS due to SRAM stuff, even though tried to sort them out. Since just resolving it would be better I think, please remove ARCH_EXYNOS in arch/arm/Kconfig when merge conflict happens. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJTiNnJAAoJEA0Cl+kVi2xqw4AP/1h2Rtg5/VXTwspQNicVqmjy xh1R5HNkCK9J+Vs+hrajFog4lneTuKDimgJqwM4JcMR9Y6KFCVivMZ+rPpaVpa2o Ly50EgEUAx7iir/PswttUVsSAoP/LXwwP44tWgV6qwV4N2qZ4BPKSAkc+l4icrqv Zzx4h1sxMKF2oTarDsrBIj7UszZtIB6Dt00ogyEJ2BNgWcWzU51YtWOz6MdC+Eha Wz2cfnrl2GiSIUC+Y0jRxeNfJyIgVMvrWpC23d5QSO0qx5xDNhSq/+eNXpd4gTGc aMoBnTgzvymOgLYFkcDCDYxsehXqX1b3hHzu1BfRTWjcA9wmxFhC8eOiMAgDso79 V8L/k5/XVAP34TFzZR1ZD5rCqgBIuDgmeOqyzMAxMLVKTQZrJ/6smKq94FCCD89G lOtiLmAPems8g7DE2wpWsYiml7TyUHNqgHP4FWJThnERjBa+rDKsyozzgFLJLqD7 /qL+qn6C0COtfDN0SBiIiLyV/0j+DI+tS5uGWgKWxGkRLQev1GyWGsGJZBx1tlJB v0/aAEAFkTWg9b+dO9OdUXzbGvc3VAQbaiwfCb73vsEibuO3IGpsXsl0d+ChXUkK XbQW5nNHOCKJj1auAg+4AqWm+evSzjZa/gViUlxE0vpK1Bc8uXZy0sYhQwC0lBaB KBqHE3ImvgIgPhXa3t5R =/Vpg -----END PGP SIGNATURE----- Merge tag 'samsung-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Samsung Exynos updates for 3.16 - add new SoCs support : exynos3250, 5260, 5410 and 5800 - enable multi-platform on exynos : consolidate exynos related Kconfig entries * tag 'samsung-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (22 commits) ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC cpufreq: exynos: Fix the compile error ARM: S3C24XX: move debug-macro.S into the common space ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro ARM: S3C24XX: trim down debug uart handling ARM: compressed/head.S: remove s3c24xx special case ARM: EXYNOS: Remove unnecessary inclusion of cpu.h ARM: EXYNOS: Migrate Exynos specific macros from plat to mach ARM: EXYNOS: Remove exynos_subsys registration ARM: EXYNOS: Remove duplicate lines in Makefile ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling ARM: dts: Remove g2d_pd node for exynos5420 ARM: dts: Remove mau_pd node for exynos5420 ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-31 12:44:32 +08:00
boot_reg = sysram_ns_base_addr + 0x1c;
/*
* Almost all Exynos-series of SoCs that run in secure mode don't need
* additional offset for every CPU, with Exynos4412 being the only
* exception.
*/
if (soc_is_exynos4412())
boot_reg += 4 * cpu;
writel_relaxed(boot_addr, boot_reg);
return 0;
}
static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr)
{
void __iomem *boot_reg;
if (!sysram_ns_base_addr)
return -ENODEV;
boot_reg = sysram_ns_base_addr + 0x1c;
if (soc_is_exynos4412())
boot_reg += 4 * cpu;
*boot_addr = readl_relaxed(boot_reg);
return 0;
}
static int exynos_cpu_suspend(unsigned long arg)
{
flush_cache_all();
outer_flush_all();
exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
pr_info("Failed to suspend the system\n");
writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
return 1;
}
static int exynos_suspend(void)
{
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_save_cp15();
writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
writel(__pa_symbol(exynos_cpu_resume_ns),
sysram_ns_base_addr + EXYNOS_BOOT_ADDR);
return cpu_suspend(0, exynos_cpu_suspend);
}
static int exynos_resume(void)
{
writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
return 0;
}
static const struct firmware_ops exynos_firmware_ops = {
.do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL,
.set_cpu_boot_addr = exynos_set_cpu_boot_addr,
.get_cpu_boot_addr = exynos_get_cpu_boot_addr,
.cpu_boot = exynos_cpu_boot,
.suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL,
.resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL,
};
static void exynos_l2_write_sec(unsigned long val, unsigned reg)
{
static int l2cache_enabled;
switch (reg) {
case L2X0_CTRL:
if (val & L2X0_CTRL_EN) {
/*
* Before the cache can be enabled, due to firmware
* design, SMC_CMD_L2X0INVALL must be called.
*/
if (!l2cache_enabled) {
exynos_smc(SMC_CMD_L2X0INVALL, 0, 0, 0);
l2cache_enabled = 1;
}
} else {
l2cache_enabled = 0;
}
exynos_smc(SMC_CMD_L2X0CTRL, val, 0, 0);
break;
case L2X0_DEBUG_CTRL:
exynos_smc(SMC_CMD_L2X0DEBUG, val, 0, 0);
break;
default:
WARN_ONCE(1, "%s: ignoring write to reg 0x%x\n", __func__, reg);
}
}
static void exynos_l2_configure(const struct l2x0_regs *regs)
{
exynos_smc(SMC_CMD_L2X0SETUP1, regs->tag_latency, regs->data_latency,
regs->prefetch_ctrl);
exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0);
}
bool __init exynos_secure_firmware_available(void)
{
struct device_node *nd;
const __be32 *addr;
nd = of_find_compatible_node(NULL, NULL,
"samsung,secure-firmware");
if (!nd)
return false;
addr = of_get_address(nd, 0, NULL, NULL);
if (!addr) {
pr_err("%s: No address specified.\n", __func__);
return false;
}
return true;
}
void __init exynos_firmware_init(void)
{
if (!exynos_secure_firmware_available())
return;
pr_info("Running under secure firmware.\n");
register_firmware_ops(&exynos_firmware_ops);
/*
* Exynos 4 SoCs (based on Cortex A9 and equipped with L2C-310),
* running under secure firmware, require certain registers of L2
* cache controller to be written in secure mode. Here .write_sec
* callback is provided to perform necessary SMC calls.
*/
if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
outer_cache.write_sec = exynos_l2_write_sec;
outer_cache.configure = exynos_l2_configure;
}
}
#define REG_CPU_STATE_ADDR (sysram_ns_base_addr + 0x28)
#define BOOT_MODE_MASK 0x1f
void exynos_set_boot_flag(unsigned int cpu, unsigned int mode)
{
unsigned int tmp;
tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
if (mode & BOOT_MODE_MASK)
tmp &= ~BOOT_MODE_MASK;
tmp |= mode;
writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
}
void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
{
unsigned int tmp;
tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
tmp &= ~mode;
writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
}