linux/arch/riscv/mm/init.c

563 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Regents of the University of California
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
* Copyright (C) 2019 Western Digital Corporation or its affiliates.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/memblock.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:49 +08:00
#include <linux/initrd.h>
#include <linux/swap.h>
#include <linux/sizes.h>
#include <linux/of_fdt.h>
riscv: Fix memblock reservation for device tree blob This fixes an error with how the FDT blob is reserved in memblock. An incorrect physical address calculation exposed the FDT header to unintended corruption, which typically manifested with of_fdt_raw_init() faulting during late boot after fdt_totalsize() returned a wrong value. Systems with smaller physical memory sizes more frequently trigger this issue, as the kernel is more likely to allocate from the DMA32 zone where bbl places the DTB after the kernel image. Commit 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") changed the mapping of the DTB to reside in the fixmap area. Consequently, early_init_fdt_reserve_self() cannot be used anymore in setup_bootmem() since it relies on __pa() to derive a physical address, which does not work with dtb_early_va that is no longer a valid kernel logical address. The reserved[0x1] region shows the effect of the pointer underflow resulting from the __pa(initial_boot_params) offset subtraction: [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514 [ 0.000000] memory.cnt = 0x1 [ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0 [ 0.000000] reserved.cnt = 0x2 [ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0 [ 0.000000] reserved[0x1] [0xfffffff080100000-0xfffffff080100527], 0x0000000000000528 bytes flags: 0x0 With the fix applied: [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514 [ 0.000000] memory.cnt = 0x1 [ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0 [ 0.000000] reserved.cnt = 0x2 [ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0 [ 0.000000] reserved[0x1] [0x0000000080e00000-0x0000000080e00527], 0x0000000000000528 bytes flags: 0x0 Fixes: 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") Signed-off-by: Albert Ou <aou@eecs.berkeley.edu> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-28 07:14:18 +08:00
#include <linux/libfdt.h>
#include <linux/set_memory.h>
#include <asm/fixmap.h>
#include <asm/tlbflush.h>
#include <asm/sections.h>
#include <asm/soc.h>
#include <asm/io.h>
#include <asm/ptdump.h>
#include "../kernel/head.h"
unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
__page_aligned_bss;
EXPORT_SYMBOL(empty_zero_page);
extern char _start[];
void *dtb_early_va;
static void __init zone_sizes_init(void)
{
unsigned long max_zone_pfns[MAX_NR_ZONES] = { 0, };
#ifdef CONFIG_ZONE_DMA32
max_zone_pfns[ZONE_DMA32] = PFN_DOWN(min(4UL * SZ_1G,
(unsigned long) PFN_PHYS(max_low_pfn)));
#endif
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
mm: use free_area_init() instead of free_area_init_nodes() free_area_init() has effectively became a wrapper for free_area_init_nodes() and there is no point of keeping it. Still free_area_init() name is shorter and more general as it does not imply necessity to initialize multiple nodes. Rename free_area_init_nodes() to free_area_init(), update the callers and drop old version of free_area_init(). Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-6-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:57:10 +08:00
free_area_init(max_zone_pfns);
}
static void setup_zero_page(void)
{
memset((void *)empty_zero_page, 0, PAGE_SIZE);
}
#if defined(CONFIG_MMU) && defined(CONFIG_DEBUG_VM)
static inline void print_mlk(char *name, unsigned long b, unsigned long t)
{
pr_notice("%12s : 0x%08lx - 0x%08lx (%4ld kB)\n", name, b, t,
(((t) - (b)) >> 10));
}
static inline void print_mlm(char *name, unsigned long b, unsigned long t)
{
pr_notice("%12s : 0x%08lx - 0x%08lx (%4ld MB)\n", name, b, t,
(((t) - (b)) >> 20));
}
static void print_vm_layout(void)
{
pr_notice("Virtual kernel memory layout:\n");
print_mlk("fixmap", (unsigned long)FIXADDR_START,
(unsigned long)FIXADDR_TOP);
print_mlm("pci io", (unsigned long)PCI_IO_START,
(unsigned long)PCI_IO_END);
print_mlm("vmemmap", (unsigned long)VMEMMAP_START,
(unsigned long)VMEMMAP_END);
print_mlm("vmalloc", (unsigned long)VMALLOC_START,
(unsigned long)VMALLOC_END);
print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
(unsigned long)high_memory);
}
#else
static void print_vm_layout(void) { }
#endif /* CONFIG_DEBUG_VM */
void __init mem_init(void)
{
#ifdef CONFIG_FLATMEM
BUG_ON(!mem_map);
#endif /* CONFIG_FLATMEM */
high_memory = (void *)(__va(PFN_PHYS(max_low_pfn)));
memblock: rename free_all_bootmem to memblock_free_all The conversion is done using sed -i 's@free_all_bootmem@memblock_free_all@' \ $(git grep -l free_all_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:30 +08:00
memblock_free_all();
mem_init_print_info(NULL);
print_vm_layout();
}
#ifdef CONFIG_BLK_DEV_INITRD
static void __init setup_initrd(void)
{
unsigned long size;
if (initrd_start >= initrd_end) {
pr_info("initrd not found or empty");
goto disable;
}
if (__pa_symbol(initrd_end) > PFN_PHYS(max_low_pfn)) {
pr_err("initrd extends beyond end of memory");
goto disable;
}
size = initrd_end - initrd_start;
memblock_reserve(__pa_symbol(initrd_start), size);
initrd_below_start_ok = 1;
pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",
(void *)(initrd_start), size);
return;
disable:
pr_cont(" - disabling initrd\n");
initrd_start = 0;
initrd_end = 0;
}
#endif /* CONFIG_BLK_DEV_INITRD */
riscv: Fix memblock reservation for device tree blob This fixes an error with how the FDT blob is reserved in memblock. An incorrect physical address calculation exposed the FDT header to unintended corruption, which typically manifested with of_fdt_raw_init() faulting during late boot after fdt_totalsize() returned a wrong value. Systems with smaller physical memory sizes more frequently trigger this issue, as the kernel is more likely to allocate from the DMA32 zone where bbl places the DTB after the kernel image. Commit 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") changed the mapping of the DTB to reside in the fixmap area. Consequently, early_init_fdt_reserve_self() cannot be used anymore in setup_bootmem() since it relies on __pa() to derive a physical address, which does not work with dtb_early_va that is no longer a valid kernel logical address. The reserved[0x1] region shows the effect of the pointer underflow resulting from the __pa(initial_boot_params) offset subtraction: [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514 [ 0.000000] memory.cnt = 0x1 [ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0 [ 0.000000] reserved.cnt = 0x2 [ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0 [ 0.000000] reserved[0x1] [0xfffffff080100000-0xfffffff080100527], 0x0000000000000528 bytes flags: 0x0 With the fix applied: [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514 [ 0.000000] memory.cnt = 0x1 [ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0 [ 0.000000] reserved.cnt = 0x2 [ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0 [ 0.000000] reserved[0x1] [0x0000000080e00000-0x0000000080e00527], 0x0000000000000528 bytes flags: 0x0 Fixes: 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") Signed-off-by: Albert Ou <aou@eecs.berkeley.edu> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-28 07:14:18 +08:00
static phys_addr_t dtb_early_pa __initdata;
void __init setup_bootmem(void)
{
struct memblock_region *reg;
phys_addr_t mem_size = 0;
phys_addr_t vmlinux_end = __pa_symbol(&_end);
phys_addr_t vmlinux_start = __pa_symbol(&_start);
/* Find the memory region containing the kernel */
for_each_memblock(memory, reg) {
phys_addr_t end = reg->base + reg->size;
if (reg->base <= vmlinux_start && vmlinux_end <= end) {
mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET);
/*
* Remove memblock from the end of usable area to the
* end of region
*/
if (reg->base + mem_size < end)
memblock_remove(reg->base + mem_size,
end - reg->base - mem_size);
}
}
BUG_ON(mem_size == 0);
/* Reserve from the start of the kernel to the end of the kernel */
memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
set_max_mapnr(PFN_DOWN(mem_size));
riscv: set max_pfn to the PFN of the last page The current max_pfn equals to zero. In this case, I found it caused users cannot get some page information through /proc such as kpagecount in v5.6 kernel because of new sanity checks. The following message is displayed by stress-ng test suite with the command "stress-ng --verbose --physpage 1 -t 1" on HiFive unleashed board. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [109] 4 processors online, 4 processors configured stress-ng: info: [109] dispatching hogs: 1 physpage stress-ng: debug: [109] cache allocate: reducing cache level from L3 (too high) to L0 stress-ng: debug: [109] get_cpu_cache: invalid cache_level: 0 stress-ng: info: [109] cache allocate: using built-in defaults as no suitable cache found stress-ng: debug: [109] cache allocate: default cache size: 2048K stress-ng: debug: [109] starting stressors stress-ng: debug: [109] 1 stressor spawned stress-ng: debug: [110] stress-ng-physpage: started [110] (instance 0) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd34de000 in /proc/kpagecount, errno=0 (Success) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) ... stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) stress-ng: debug: [110] stress-ng-physpage: exited [110] (instance 0) stress-ng: debug: [109] process [110] terminated stress-ng: info: [109] successful run completed in 1.00s # After applying this patch, the kernel can pass the test. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [104] 4 processors online, 4 processors configured stress-ng: info: [104] dispatching hogs: 1 physpage stress-ng: info: [104] cache allocate: using defaults, can't determine cache details from sysfs stress-ng: debug: [104] cache allocate: default cache size: 2048K stress-ng: debug: [104] starting stressors stress-ng: debug: [104] 1 stressor spawned stress-ng: debug: [105] stress-ng-physpage: started [105] (instance 0) stress-ng: debug: [105] stress-ng-physpage: exited [105] (instance 0) stress-ng: debug: [104] process [105] terminated stress-ng: info: [104] successful run completed in 1.01s # Cc: stable@vger.kernel.org Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Yash Shah <yash.shah@sifive.com> Tested-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-04-27 14:59:24 +08:00
max_pfn = PFN_DOWN(memblock_end_of_DRAM());
max_low_pfn = max_pfn;
#ifdef CONFIG_BLK_DEV_INITRD
setup_initrd();
#endif /* CONFIG_BLK_DEV_INITRD */
riscv: Fix memblock reservation for device tree blob This fixes an error with how the FDT blob is reserved in memblock. An incorrect physical address calculation exposed the FDT header to unintended corruption, which typically manifested with of_fdt_raw_init() faulting during late boot after fdt_totalsize() returned a wrong value. Systems with smaller physical memory sizes more frequently trigger this issue, as the kernel is more likely to allocate from the DMA32 zone where bbl places the DTB after the kernel image. Commit 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") changed the mapping of the DTB to reside in the fixmap area. Consequently, early_init_fdt_reserve_self() cannot be used anymore in setup_bootmem() since it relies on __pa() to derive a physical address, which does not work with dtb_early_va that is no longer a valid kernel logical address. The reserved[0x1] region shows the effect of the pointer underflow resulting from the __pa(initial_boot_params) offset subtraction: [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514 [ 0.000000] memory.cnt = 0x1 [ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0 [ 0.000000] reserved.cnt = 0x2 [ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0 [ 0.000000] reserved[0x1] [0xfffffff080100000-0xfffffff080100527], 0x0000000000000528 bytes flags: 0x0 With the fix applied: [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514 [ 0.000000] memory.cnt = 0x1 [ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0 [ 0.000000] reserved.cnt = 0x2 [ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0 [ 0.000000] reserved[0x1] [0x0000000080e00000-0x0000000080e00527], 0x0000000000000528 bytes flags: 0x0 Fixes: 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") Signed-off-by: Albert Ou <aou@eecs.berkeley.edu> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-28 07:14:18 +08:00
/*
* Avoid using early_init_fdt_reserve_self() since __pa() does
* not work for DTB pointers that are fixmap addresses
*/
memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
early_init_fdt_scan_reserved_mem();
memblock_allow_resize();
memblock_dump_all();
for_each_memblock(memory, reg) {
unsigned long start_pfn = memblock_region_memory_base_pfn(reg);
unsigned long end_pfn = memblock_region_memory_end_pfn(reg);
memblock_set_node(PFN_PHYS(start_pfn),
PFN_PHYS(end_pfn - start_pfn),
&memblock.memory, 0);
}
}
#ifdef CONFIG_MMU
unsigned long va_pa_offset;
EXPORT_SYMBOL(va_pa_offset);
unsigned long pfn_base;
EXPORT_SYMBOL(pfn_base);
pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
static bool mmu_enabled;
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
#define MAX_EARLY_MAPPING_SIZE SZ_128M
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
{
unsigned long addr = __fix_to_virt(idx);
pte_t *ptep;
BUG_ON(idx <= FIX_HOLE || idx >= __end_of_fixed_addresses);
ptep = &fixmap_pte[pte_index(addr)];
if (pgprot_val(prot)) {
set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
} else {
pte_clear(&init_mm, addr, ptep);
local_flush_tlb_page(addr);
}
}
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
static pte_t *__init get_pte_virt(phys_addr_t pa)
{
if (mmu_enabled) {
clear_fixmap(FIX_PTE);
return (pte_t *)set_fixmap_offset(FIX_PTE, pa);
} else {
return (pte_t *)((uintptr_t)pa);
}
}
static phys_addr_t __init alloc_pte(uintptr_t va)
{
/*
* We only create PMD or PGD early mappings so we
* should never reach here with MMU disabled.
*/
BUG_ON(!mmu_enabled);
return memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
}
static void __init create_pte_mapping(pte_t *ptep,
uintptr_t va, phys_addr_t pa,
phys_addr_t sz, pgprot_t prot)
{
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
uintptr_t pte_idx = pte_index(va);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
BUG_ON(sz != PAGE_SIZE);
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
if (pte_none(ptep[pte_idx]))
ptep[pte_idx] = pfn_pte(PFN_DOWN(pa), prot);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
}
#ifndef __PAGETABLE_PMD_FOLDED
pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
#if MAX_EARLY_MAPPING_SIZE < PGDIR_SIZE
#define NUM_EARLY_PMDS 1UL
#else
#define NUM_EARLY_PMDS (1UL + MAX_EARLY_MAPPING_SIZE / PGDIR_SIZE)
#endif
pmd_t early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
static pmd_t *__init get_pmd_virt(phys_addr_t pa)
{
if (mmu_enabled) {
clear_fixmap(FIX_PMD);
return (pmd_t *)set_fixmap_offset(FIX_PMD, pa);
} else {
return (pmd_t *)((uintptr_t)pa);
}
}
static phys_addr_t __init alloc_pmd(uintptr_t va)
{
uintptr_t pmd_num;
if (mmu_enabled)
return memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
pmd_num = (va - PAGE_OFFSET) >> PGDIR_SHIFT;
BUG_ON(pmd_num >= NUM_EARLY_PMDS);
return (uintptr_t)&early_pmd[pmd_num * PTRS_PER_PMD];
}
static void __init create_pmd_mapping(pmd_t *pmdp,
uintptr_t va, phys_addr_t pa,
phys_addr_t sz, pgprot_t prot)
{
pte_t *ptep;
phys_addr_t pte_phys;
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
uintptr_t pmd_idx = pmd_index(va);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
if (sz == PMD_SIZE) {
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
if (pmd_none(pmdp[pmd_idx]))
pmdp[pmd_idx] = pfn_pmd(PFN_DOWN(pa), prot);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
return;
}
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
if (pmd_none(pmdp[pmd_idx])) {
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
pte_phys = alloc_pte(va);
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
pmdp[pmd_idx] = pfn_pmd(PFN_DOWN(pte_phys), PAGE_TABLE);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
ptep = get_pte_virt(pte_phys);
memset(ptep, 0, PAGE_SIZE);
} else {
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
pte_phys = PFN_PHYS(_pmd_pfn(pmdp[pmd_idx]));
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
ptep = get_pte_virt(pte_phys);
}
create_pte_mapping(ptep, va, pa, sz, prot);
}
#define pgd_next_t pmd_t
#define alloc_pgd_next(__va) alloc_pmd(__va)
#define get_pgd_next_virt(__pa) get_pmd_virt(__pa)
#define create_pgd_next_mapping(__nextp, __va, __pa, __sz, __prot) \
create_pmd_mapping(__nextp, __va, __pa, __sz, __prot)
#define fixmap_pgd_next fixmap_pmd
#else
#define pgd_next_t pte_t
#define alloc_pgd_next(__va) alloc_pte(__va)
#define get_pgd_next_virt(__pa) get_pte_virt(__pa)
#define create_pgd_next_mapping(__nextp, __va, __pa, __sz, __prot) \
create_pte_mapping(__nextp, __va, __pa, __sz, __prot)
#define fixmap_pgd_next fixmap_pte
#endif
static void __init create_pgd_mapping(pgd_t *pgdp,
uintptr_t va, phys_addr_t pa,
phys_addr_t sz, pgprot_t prot)
{
pgd_next_t *nextp;
phys_addr_t next_phys;
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
uintptr_t pgd_idx = pgd_index(va);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
if (sz == PGDIR_SIZE) {
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
if (pgd_val(pgdp[pgd_idx]) == 0)
pgdp[pgd_idx] = pfn_pgd(PFN_DOWN(pa), prot);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
return;
}
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
if (pgd_val(pgdp[pgd_idx]) == 0) {
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
next_phys = alloc_pgd_next(va);
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
pgdp[pgd_idx] = pfn_pgd(PFN_DOWN(next_phys), PAGE_TABLE);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
nextp = get_pgd_next_virt(next_phys);
memset(nextp, 0, PAGE_SIZE);
} else {
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
next_phys = PFN_PHYS(_pgd_pfn(pgdp[pgd_idx]));
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
nextp = get_pgd_next_virt(next_phys);
}
create_pgd_next_mapping(nextp, va, pa, sz, prot);
}
static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
{
/* Upgrade to PMD_SIZE mappings whenever possible */
if ((base & (PMD_SIZE - 1)) || (size & (PMD_SIZE - 1)))
return PAGE_SIZE;
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
return PMD_SIZE;
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
}
/*
* setup_vm() is called from head.S with MMU-off.
*
* Following requirements should be honoured for setup_vm() to work
* correctly:
* 1) It should use PC-relative addressing for accessing kernel symbols.
* To achieve this we always use GCC cmodel=medany.
* 2) The compiler instrumentation for FTRACE will not work for setup_vm()
* so disable compiler instrumentation when FTRACE is enabled.
*
* Currently, the above requirements are honoured by using custom CFLAGS
* for init.o in mm/Makefile.
*/
#ifndef __riscv_cmodel_medany
#error "setup_vm() is called from head.S before relocate so it should not use absolute addressing."
#endif
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
asmlinkage void __init setup_vm(uintptr_t dtb_pa)
{
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
uintptr_t va, end_va;
uintptr_t load_pa = (uintptr_t)(&_start);
uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
uintptr_t map_size = best_map_size(load_pa, MAX_EARLY_MAPPING_SIZE);
va_pa_offset = PAGE_OFFSET - load_pa;
pfn_base = PFN_DOWN(load_pa);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
/*
* Enforce boot alignment requirements of RV32 and
* RV64 by only allowing PMD or PGD mappings.
*/
BUG_ON(map_size == PAGE_SIZE);
/* Sanity check alignment and size */
BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
BUG_ON((load_pa % map_size) != 0);
BUG_ON(load_sz > MAX_EARLY_MAPPING_SIZE);
/* Setup early PGD for fixmap */
create_pgd_mapping(early_pg_dir, FIXADDR_START,
(uintptr_t)fixmap_pgd_next, PGDIR_SIZE, PAGE_TABLE);
#ifndef __PAGETABLE_PMD_FOLDED
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
/* Setup fixmap PMD */
create_pmd_mapping(fixmap_pmd, FIXADDR_START,
(uintptr_t)fixmap_pte, PMD_SIZE, PAGE_TABLE);
/* Setup trampoline PGD and PMD */
create_pgd_mapping(trampoline_pg_dir, PAGE_OFFSET,
(uintptr_t)trampoline_pmd, PGDIR_SIZE, PAGE_TABLE);
create_pmd_mapping(trampoline_pmd, PAGE_OFFSET,
load_pa, PMD_SIZE, PAGE_KERNEL_EXEC);
#else
/* Setup trampoline PGD */
create_pgd_mapping(trampoline_pg_dir, PAGE_OFFSET,
load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
#endif
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
/*
* Setup early PGD covering entire kernel which will allows
* us to reach paging_init(). We map all memory banks later
* in setup_vm_final() below.
*/
end_va = PAGE_OFFSET + load_sz;
for (va = PAGE_OFFSET; va < end_va; va += map_size)
create_pgd_mapping(early_pg_dir, va,
load_pa + (va - PAGE_OFFSET),
map_size, PAGE_KERNEL_EXEC);
/* Create fixed mapping for early FDT parsing */
end_va = __fix_to_virt(FIX_FDT) + FIX_FDT_SIZE;
for (va = __fix_to_virt(FIX_FDT); va < end_va; va += PAGE_SIZE)
create_pte_mapping(fixmap_pte, va,
dtb_pa + (va - __fix_to_virt(FIX_FDT)),
PAGE_SIZE, PAGE_KERNEL);
/* Save pointer to DTB for early FDT parsing */
dtb_early_va = (void *)fix_to_virt(FIX_FDT) + (dtb_pa & ~PAGE_MASK);
riscv: Fix memblock reservation for device tree blob This fixes an error with how the FDT blob is reserved in memblock. An incorrect physical address calculation exposed the FDT header to unintended corruption, which typically manifested with of_fdt_raw_init() faulting during late boot after fdt_totalsize() returned a wrong value. Systems with smaller physical memory sizes more frequently trigger this issue, as the kernel is more likely to allocate from the DMA32 zone where bbl places the DTB after the kernel image. Commit 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") changed the mapping of the DTB to reside in the fixmap area. Consequently, early_init_fdt_reserve_self() cannot be used anymore in setup_bootmem() since it relies on __pa() to derive a physical address, which does not work with dtb_early_va that is no longer a valid kernel logical address. The reserved[0x1] region shows the effect of the pointer underflow resulting from the __pa(initial_boot_params) offset subtraction: [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514 [ 0.000000] memory.cnt = 0x1 [ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0 [ 0.000000] reserved.cnt = 0x2 [ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0 [ 0.000000] reserved[0x1] [0xfffffff080100000-0xfffffff080100527], 0x0000000000000528 bytes flags: 0x0 With the fix applied: [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514 [ 0.000000] memory.cnt = 0x1 [ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0 [ 0.000000] reserved.cnt = 0x2 [ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0 [ 0.000000] reserved[0x1] [0x0000000080e00000-0x0000000080e00527], 0x0000000000000528 bytes flags: 0x0 Fixes: 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") Signed-off-by: Albert Ou <aou@eecs.berkeley.edu> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-28 07:14:18 +08:00
/* Save physical address for memblock reservation */
dtb_early_pa = dtb_pa;
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
}
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
static void __init setup_vm_final(void)
{
uintptr_t va, map_size;
phys_addr_t pa, start, end;
struct memblock_region *reg;
/* Set mmu_enabled flag */
mmu_enabled = true;
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
/* Setup swapper PGD for fixmap */
create_pgd_mapping(swapper_pg_dir, FIXADDR_START,
__pa_symbol(fixmap_pgd_next),
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
PGDIR_SIZE, PAGE_TABLE);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
/* Map all memory banks */
for_each_memblock(memory, reg) {
start = reg->base;
end = start + reg->size;
if (start >= end)
break;
if (memblock_is_nomap(reg))
continue;
if (start <= __pa(PAGE_OFFSET) &&
__pa(PAGE_OFFSET) < end)
start = __pa(PAGE_OFFSET);
map_size = best_map_size(start, end - start);
for (pa = start; pa < end; pa += map_size) {
va = (uintptr_t)__va(pa);
create_pgd_mapping(swapper_pg_dir, va, pa,
map_size, PAGE_KERNEL_EXEC);
}
}
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
/* Clear fixmap PTE and PMD mappings */
clear_fixmap(FIX_PTE);
clear_fixmap(FIX_PMD);
/* Move to swapper page table */
csr_write(CSR_SATP, PFN_DOWN(__pa_symbol(swapper_pg_dir)) | SATP_MODE);
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
local_flush_tlb_all();
}
#else
asmlinkage void __init setup_vm(uintptr_t dtb_pa)
{
#ifdef CONFIG_BUILTIN_DTB
dtb_early_va = soc_lookup_builtin_dtb();
if (!dtb_early_va) {
/* Fallback to first available DTS */
dtb_early_va = (void *) __dtb_start;
}
#else
dtb_early_va = (void *)dtb_pa;
#endif
}
static inline void setup_vm_final(void)
{
}
#endif /* CONFIG_MMU */
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
#ifdef CONFIG_STRICT_KERNEL_RWX
void mark_rodata_ro(void)
{
unsigned long text_start = (unsigned long)_text;
unsigned long text_end = (unsigned long)_etext;
unsigned long rodata_start = (unsigned long)__start_rodata;
unsigned long data_start = (unsigned long)_data;
unsigned long max_low = (unsigned long)(__va(PFN_PHYS(max_low_pfn)));
set_memory_ro(text_start, (text_end - text_start) >> PAGE_SHIFT);
set_memory_ro(rodata_start, (data_start - rodata_start) >> PAGE_SHIFT);
set_memory_nx(rodata_start, (data_start - rodata_start) >> PAGE_SHIFT);
set_memory_nx(data_start, (max_low - data_start) >> PAGE_SHIFT);
debug_checkwx();
}
#endif
void __init resource_init(void)
{
struct memblock_region *region;
for_each_memblock(memory, region) {
struct resource *res;
res = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
if (!res)
panic("%s: Failed to allocate %zu bytes\n", __func__,
sizeof(struct resource));
if (memblock_is_nomap(region)) {
res->name = "reserved";
res->flags = IORESOURCE_MEM;
} else {
res->name = "System RAM";
res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
}
res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
request_resource(&iomem_resource, res);
}
}
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
void __init paging_init(void)
{
setup_vm_final();
memblocks_present();
sparse_init();
RISC-V: Setup initial page tables in two stages Currently, the setup_vm() does initial page table setup in one-shot very early before enabling MMU. Due to this, the setup_vm() has to map all possible kernel virtual addresses since it does not know size and location of RAM. This means we have kernel mappings for non-existent RAM and any buggy driver (or kernel) code doing out-of-bound access to RAM will not fault and cause underterministic behaviour. Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e. MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e. 516 KB) of memory for initial page tables which is never freed. The memory required for initial page tables will further increase if we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000) This patch implements two-staged initial page table setup, as follows: 1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in a early page table (i.e. early_pg_dir). The early_pg_dir will be used only by boot HART so it can be freed as-part of init memory free-up. 2. Final (i.e. setup_vm_final()): This stage maps all possible RAM banks in the final page table (i.e. swapper_pg_dir). The boot HART will start using swapper_pg_dir at the end of setup_vm_final(). All non-boot HARTs directly use the swapper_pg_dir created by boot HART. We have following advantages with this new approach: 1. Kernel mappings for non-existent RAM don't exists anymore. 2. Memory consumed by initial page tables is now indpendent of the chosen PAGE_OFFSET. 3. Memory consumed by initial page tables on RV64 system is 2 pages (i.e. 8 KB) which has significantly reduced and these pages will be freed as-part of the init memory free-up. The patch also provides a foundation for implementing strict kernel mappings where we protect kernel text and rodata using PTE permissions. Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-29 04:36:21 +08:00
setup_zero_page();
zone_sizes_init();
resource_init();
}
#ifdef CONFIG_SPARSEMEM_VMEMMAP
int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
struct vmem_altmap *altmap)
{
return vmemmap_populate_basepages(start, end, node);
}
#endif