linux/net/rxrpc/misc.c

194 lines
5.8 KiB
C
Raw Normal View History

/* Miscellaneous bits
*
* Copyright (C) 2016 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include "ar-internal.h"
rxrpc: Limit the listening backlog Limit the socket incoming call backlog queue size so that a remote client can't pump in sufficient new calls that the server runs out of memory. Note that this is partially theoretical at the moment since whilst the number of calls is limited, the number of packets trying to set up new calls is not. This will be addressed in a later patch. If the caller of listen() specifies a backlog INT_MAX, then they get the current maximum; anything else greater than max_backlog or anything negative incurs EINVAL. The limit on the maximum queue size can be set by: echo N >/proc/sys/net/rxrpc/max_backlog where 4<=N<=32. Further, set the default backlog to 0, requiring listen() to be called before we start actually queueing new calls. Whilst this kind of is a change in the UAPI, the caller can't actually *accept* new calls anyway unless they've first called listen() to put the socket into the LISTENING state - thus the aforementioned new calls would otherwise just sit there, eating up kernel memory. (Note that sockets that don't have a non-zero service ID bound don't get incoming calls anyway.) Given that the default backlog is now 0, make the AFS filesystem call kernel_listen() to set the maximum backlog for itself. Possible improvements include: (1) Trimming a too-large backlog to max_backlog when listen is called. (2) Trimming the backlog value whenever the value is used so that changes to max_backlog are applied to an open socket automatically. Note that the AFS filesystem opens one socket and keeps it open for extended periods, so would miss out on changes to max_backlog. (3) Having a separate setting for the AFS filesystem. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-11 05:30:37 +08:00
/*
* The maximum listening backlog queue size that may be set on a socket by
* listen().
*/
unsigned int rxrpc_max_backlog __read_mostly = 10;
/*
* How long to wait before scheduling ACK generation after seeing a
* packet with RXRPC_REQUEST_ACK set (in jiffies).
*/
unsigned int rxrpc_requested_ack_delay = 1;
/*
* How long to wait before scheduling an ACK with subtype DELAY (in jiffies).
*
* We use this when we've received new data packets. If those packets aren't
* all consumed within this time we will send a DELAY ACK if an ACK was not
* requested to let the sender know it doesn't need to resend.
*/
unsigned int rxrpc_soft_ack_delay = 1 * HZ;
/*
* How long to wait before scheduling an ACK with subtype IDLE (in jiffies).
*
* We use this when we've consumed some previously soft-ACK'd packets when
* further packets aren't immediately received to decide when to send an IDLE
* ACK let the other end know that it can free up its Tx buffer space.
*/
unsigned int rxrpc_idle_ack_delay = 0.5 * HZ;
/*
* Receive window size in packets. This indicates the maximum number of
* unconsumed received packets we're willing to retain in memory. Once this
* limit is hit, we should generate an EXCEEDS_WINDOW ACK and discard further
* packets.
*/
unsigned int rxrpc_rx_window_size = RXRPC_INIT_RX_WINDOW_SIZE;
#if (RXRPC_RXTX_BUFF_SIZE - 1) < RXRPC_INIT_RX_WINDOW_SIZE
#error Need to reduce RXRPC_INIT_RX_WINDOW_SIZE
#endif
/*
* Maximum Rx MTU size. This indicates to the sender the size of jumbo packet
* made by gluing normal packets together that we're willing to handle.
*/
unsigned int rxrpc_rx_mtu = 5692;
/*
* The maximum number of fragments in a received jumbo packet that we tell the
* sender that we're willing to handle.
*/
unsigned int rxrpc_rx_jumbo_max = 4;
/*
* Time till packet resend (in jiffies).
*/
unsigned int rxrpc_resend_timeout = 4 * HZ;
const char *const rxrpc_pkts[] = {
"?00",
"DATA", "ACK", "BUSY", "ABORT", "ACKALL", "CHALL", "RESP", "DEBUG",
"?09", "?10", "?11", "?12", "VERSION", "?14", "?15"
};
const s8 rxrpc_ack_priority[] = {
[0] = 0,
[RXRPC_ACK_DELAY] = 1,
[RXRPC_ACK_REQUESTED] = 2,
[RXRPC_ACK_IDLE] = 3,
[RXRPC_ACK_DUPLICATE] = 4,
[RXRPC_ACK_OUT_OF_SEQUENCE] = 5,
[RXRPC_ACK_EXCEEDS_WINDOW] = 6,
[RXRPC_ACK_NOSPACE] = 7,
[RXRPC_ACK_PING_RESPONSE] = 8,
[RXRPC_ACK_PING] = 9,
};
const char *rxrpc_acks(u8 reason)
{
static const char *const str[] = {
"---", "REQ", "DUP", "OOS", "WIN", "MEM", "PNG", "PNR", "DLY",
"IDL", "-?-"
};
if (reason >= ARRAY_SIZE(str))
reason = ARRAY_SIZE(str) - 1;
return str[reason];
}
const char rxrpc_skb_traces[rxrpc_skb__nr_trace][7] = {
[rxrpc_skb_rx_cleaned] = "Rx CLN",
[rxrpc_skb_rx_freed] = "Rx FRE",
[rxrpc_skb_rx_got] = "Rx GOT",
[rxrpc_skb_rx_lost] = "Rx *L*",
[rxrpc_skb_rx_received] = "Rx RCV",
[rxrpc_skb_rx_purged] = "Rx PUR",
[rxrpc_skb_rx_rotated] = "Rx ROT",
[rxrpc_skb_rx_seen] = "Rx SEE",
[rxrpc_skb_tx_cleaned] = "Tx CLN",
[rxrpc_skb_tx_freed] = "Tx FRE",
[rxrpc_skb_tx_got] = "Tx GOT",
[rxrpc_skb_tx_lost] = "Tx *L*",
[rxrpc_skb_tx_new] = "Tx NEW",
[rxrpc_skb_tx_rotated] = "Tx ROT",
[rxrpc_skb_tx_seen] = "Tx SEE",
};
const char rxrpc_conn_traces[rxrpc_conn__nr_trace][4] = {
[rxrpc_conn_new_client] = "NWc",
[rxrpc_conn_new_service] = "NWs",
[rxrpc_conn_queued] = "QUE",
[rxrpc_conn_seen] = "SEE",
[rxrpc_conn_got] = "GOT",
[rxrpc_conn_put_client] = "PTc",
[rxrpc_conn_put_service] = "PTs",
};
const char rxrpc_client_traces[rxrpc_client__nr_trace][7] = {
[rxrpc_client_activate_chans] = "Activa",
[rxrpc_client_alloc] = "Alloc ",
[rxrpc_client_chan_activate] = "ChActv",
[rxrpc_client_chan_disconnect] = "ChDisc",
[rxrpc_client_chan_pass] = "ChPass",
[rxrpc_client_chan_unstarted] = "ChUnst",
[rxrpc_client_cleanup] = "Clean ",
[rxrpc_client_count] = "Count ",
[rxrpc_client_discard] = "Discar",
[rxrpc_client_duplicate] = "Duplic",
[rxrpc_client_exposed] = "Expose",
[rxrpc_client_replace] = "Replac",
[rxrpc_client_to_active] = "->Actv",
[rxrpc_client_to_culled] = "->Cull",
[rxrpc_client_to_idle] = "->Idle",
[rxrpc_client_to_inactive] = "->Inac",
[rxrpc_client_to_waiting] = "->Wait",
[rxrpc_client_uncount] = "Uncoun",
};
const char rxrpc_transmit_traces[rxrpc_transmit__nr_trace][4] = {
[rxrpc_transmit_wait] = "WAI",
[rxrpc_transmit_queue] = "QUE",
[rxrpc_transmit_queue_reqack] = "QRA",
[rxrpc_transmit_queue_last] = "QLS",
[rxrpc_transmit_rotate] = "ROT",
[rxrpc_transmit_end] = "END",
};
const char rxrpc_receive_traces[rxrpc_receive__nr_trace][4] = {
[rxrpc_receive_incoming] = "INC",
[rxrpc_receive_queue] = "QUE",
[rxrpc_receive_queue_last] = "QLS",
[rxrpc_receive_front] = "FRN",
[rxrpc_receive_rotate] = "ROT",
[rxrpc_receive_end] = "END",
};
const char rxrpc_recvmsg_traces[rxrpc_recvmsg__nr_trace][5] = {
[rxrpc_recvmsg_enter] = "ENTR",
[rxrpc_recvmsg_wait] = "WAIT",
[rxrpc_recvmsg_dequeue] = "DEQU",
[rxrpc_recvmsg_hole] = "HOLE",
[rxrpc_recvmsg_next] = "NEXT",
[rxrpc_recvmsg_cont] = "CONT",
[rxrpc_recvmsg_full] = "FULL",
[rxrpc_recvmsg_data_return] = "DATA",
[rxrpc_recvmsg_terminal] = "TERM",
[rxrpc_recvmsg_to_be_accepted] = "TBAC",
[rxrpc_recvmsg_return] = "RETN",
};
const char rxrpc_rtt_tx_traces[rxrpc_rtt_tx__nr_trace][5] = {
[rxrpc_rtt_tx_ping] = "PING",
};
const char rxrpc_rtt_rx_traces[rxrpc_rtt_rx__nr_trace][5] = {
[rxrpc_rtt_rx_ping_response] = "PONG",
};