linux/fs/btrfs/qgroup.h

440 lines
14 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
Btrfs: rework qgroup accounting Currently qgroups account for space by intercepting delayed ref updates to fs trees. It does this by adding sequence numbers to delayed ref updates so that it can figure out how the tree looked before the update so we can adjust the counters properly. The problem with this is that it does not allow delayed refs to be merged, so if you say are defragging an extent with 5k snapshots pointing to it we will thrash the delayed ref lock because we need to go back and manually merge these things together. Instead we want to process quota changes when we know they are going to happen, like when we first allocate an extent, we free a reference for an extent, we add new references etc. This patch accomplishes this by only adding qgroup operations for real ref changes. We only modify the sequence number when we need to lookup roots for bytenrs, this reduces the amount of churn on the sequence number and allows us to merge delayed refs as we add them most of the time. This patch encompasses a bunch of architectural changes 1) qgroup ref operations: instead of tracking qgroup operations through the delayed refs we simply add new ref operations whenever we notice that we need to when we've modified the refs themselves. 2) tree mod seq: we no longer have this separation of major/minor counters. this makes the sequence number stuff much more sane and we can remove some locking that was needed to protect the counter. 3) delayed ref seq: we now read the tree mod seq number and use that as our sequence. This means each new delayed ref doesn't have it's own unique sequence number, rather whenever we go to lookup backrefs we inc the sequence number so we can make sure to keep any new operations from screwing up our world view at that given point. This allows us to merge delayed refs during runtime. With all of these changes the delayed ref stuff is a little saner and the qgroup accounting stuff no longer goes negative in some cases like it was before. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-14 08:30:47 +08:00
/*
* Copyright (C) 2014 Facebook. All rights reserved.
*/
#ifndef BTRFS_QGROUP_H
#define BTRFS_QGROUP_H
Btrfs: rework qgroup accounting Currently qgroups account for space by intercepting delayed ref updates to fs trees. It does this by adding sequence numbers to delayed ref updates so that it can figure out how the tree looked before the update so we can adjust the counters properly. The problem with this is that it does not allow delayed refs to be merged, so if you say are defragging an extent with 5k snapshots pointing to it we will thrash the delayed ref lock because we need to go back and manually merge these things together. Instead we want to process quota changes when we know they are going to happen, like when we first allocate an extent, we free a reference for an extent, we add new references etc. This patch accomplishes this by only adding qgroup operations for real ref changes. We only modify the sequence number when we need to lookup roots for bytenrs, this reduces the amount of churn on the sequence number and allows us to merge delayed refs as we add them most of the time. This patch encompasses a bunch of architectural changes 1) qgroup ref operations: instead of tracking qgroup operations through the delayed refs we simply add new ref operations whenever we notice that we need to when we've modified the refs themselves. 2) tree mod seq: we no longer have this separation of major/minor counters. this makes the sequence number stuff much more sane and we can remove some locking that was needed to protect the counter. 3) delayed ref seq: we now read the tree mod seq number and use that as our sequence. This means each new delayed ref doesn't have it's own unique sequence number, rather whenever we go to lookup backrefs we inc the sequence number so we can make sure to keep any new operations from screwing up our world view at that given point. This allows us to merge delayed refs during runtime. With all of these changes the delayed ref stuff is a little saner and the qgroup accounting stuff no longer goes negative in some cases like it was before. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-14 08:30:47 +08:00
#include <linux/types.h>
btrfs: qgroup: Introduce per-root swapped blocks infrastructure To allow delayed subtree swap rescan, btrfs needs to record per-root information about which tree blocks get swapped. This patch introduces the required infrastructure. The designed workflow will be: 1) Record the subtree root block that gets swapped. During subtree swap: O = Old tree blocks N = New tree blocks reloc tree subvolume tree X Root Root / \ / \ NA OB OA OB / | | \ / | | \ NC ND OE OF OC OD OE OF In this case, NA and OA are going to be swapped, record (NA, OA) into subvolume tree X. 2) After subtree swap. reloc tree subvolume tree X Root Root / \ / \ OA OB NA OB / | | \ / | | \ OC OD OE OF NC ND OE OF 3a) COW happens for OB If we are going to COW tree block OB, we check OB's bytenr against tree X's swapped_blocks structure. If it doesn't fit any, nothing will happen. 3b) COW happens for NA Check NA's bytenr against tree X's swapped_blocks, and get a hit. Then we do subtree scan on both subtrees OA and NA. Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND). Then no matter what we do to subvolume tree X, qgroup numbers will still be correct. Then NA's record gets removed from X's swapped_blocks. 4) Transaction commit Any record in X's swapped_blocks gets removed, since there is no modification to swapped subtrees, no need to trigger heavy qgroup subtree rescan for them. This will introduce 128 bytes overhead for each btrfs_root even qgroup is not enabled. This is to reduce memory allocations and potential failures. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 15:15:16 +08:00
#include <linux/spinlock.h>
#include <linux/rbtree.h>
#include <linux/kobject.h>
#include <linux/list.h>
#include <uapi/linux/btrfs_tree.h>
struct extent_buffer;
struct extent_changeset;
struct btrfs_delayed_extent_op;
struct btrfs_fs_info;
struct btrfs_root;
struct btrfs_ioctl_quota_ctl_args;
struct btrfs_trans_handle;
struct btrfs_delayed_ref_root;
struct btrfs_inode;
/*
* Btrfs qgroup overview
*
* Btrfs qgroup splits into 3 main part:
* 1) Reserve
* Reserve metadata/data space for incoming operations
* Affect how qgroup limit works
*
* 2) Trace
* Tell btrfs qgroup to trace dirty extents.
*
* Dirty extents including:
* - Newly allocated extents
* - Extents going to be deleted (in this trans)
* - Extents whose owner is going to be modified
*
* This is the main part affects whether qgroup numbers will stay
* consistent.
* Btrfs qgroup can trace clean extents and won't cause any problem,
* but it will consume extra CPU time, it should be avoided if possible.
*
* 3) Account
* Btrfs qgroup will updates its numbers, based on dirty extents traced
* in previous step.
*
* Normally at qgroup rescan and transaction commit time.
*/
btrfs: qgroup: Introduce per-root swapped blocks infrastructure To allow delayed subtree swap rescan, btrfs needs to record per-root information about which tree blocks get swapped. This patch introduces the required infrastructure. The designed workflow will be: 1) Record the subtree root block that gets swapped. During subtree swap: O = Old tree blocks N = New tree blocks reloc tree subvolume tree X Root Root / \ / \ NA OB OA OB / | | \ / | | \ NC ND OE OF OC OD OE OF In this case, NA and OA are going to be swapped, record (NA, OA) into subvolume tree X. 2) After subtree swap. reloc tree subvolume tree X Root Root / \ / \ OA OB NA OB / | | \ / | | \ OC OD OE OF NC ND OE OF 3a) COW happens for OB If we are going to COW tree block OB, we check OB's bytenr against tree X's swapped_blocks structure. If it doesn't fit any, nothing will happen. 3b) COW happens for NA Check NA's bytenr against tree X's swapped_blocks, and get a hit. Then we do subtree scan on both subtrees OA and NA. Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND). Then no matter what we do to subvolume tree X, qgroup numbers will still be correct. Then NA's record gets removed from X's swapped_blocks. 4) Transaction commit Any record in X's swapped_blocks gets removed, since there is no modification to swapped subtrees, no need to trigger heavy qgroup subtree rescan for them. This will introduce 128 bytes overhead for each btrfs_root even qgroup is not enabled. This is to reduce memory allocations and potential failures. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 15:15:16 +08:00
/*
* Special performance optimization for balance.
*
* For balance, we need to swap subtree of subvolume and reloc trees.
* In theory, we need to trace all subtree blocks of both subvolume and reloc
* trees, since their owner has changed during such swap.
*
* However since balance has ensured that both subtrees are containing the
* same contents and have the same tree structures, such swap won't cause
* qgroup number change.
*
* But there is a race window between subtree swap and transaction commit,
* during that window, if we increase/decrease tree level or merge/split tree
* blocks, we still need to trace the original subtrees.
*
* So for balance, we use a delayed subtree tracing, whose workflow is:
*
* 1) Record the subtree root block get swapped.
*
* During subtree swap:
* O = Old tree blocks
* N = New tree blocks
* reloc tree subvolume tree X
* Root Root
* / \ / \
* NA OB OA OB
* / | | \ / | | \
* NC ND OE OF OC OD OE OF
*
* In this case, NA and OA are going to be swapped, record (NA, OA) into
* subvolume tree X.
*
* 2) After subtree swap.
* reloc tree subvolume tree X
* Root Root
* / \ / \
* OA OB NA OB
* / | | \ / | | \
* OC OD OE OF NC ND OE OF
*
* 3a) COW happens for OB
* If we are going to COW tree block OB, we check OB's bytenr against
* tree X's swapped_blocks structure.
* If it doesn't fit any, nothing will happen.
*
* 3b) COW happens for NA
* Check NA's bytenr against tree X's swapped_blocks, and get a hit.
* Then we do subtree scan on both subtrees OA and NA.
* Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND).
*
* Then no matter what we do to subvolume tree X, qgroup numbers will
* still be correct.
* Then NA's record gets removed from X's swapped_blocks.
*
* 4) Transaction commit
* Any record in X's swapped_blocks gets removed, since there is no
* modification to the swapped subtrees, no need to trigger heavy qgroup
* subtree rescan for them.
*/
/*
* These flags share the flags field of the btrfs_qgroup_status_item with the
* persisted flags defined in btrfs_tree.h.
*
* To minimize the chance of collision with new persisted status flags, these
* count backwards from the MSB.
*/
#define BTRFS_QGROUP_RUNTIME_FLAG_CANCEL_RESCAN (1ULL << 63)
#define BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING (1ULL << 62)
/*
* Record a dirty extent, and info qgroup to update quota on it
*/
struct btrfs_qgroup_extent_record {
struct rb_node node;
u64 bytenr;
u64 num_bytes;
btrfs: qgroup: Move reserved data accounting from btrfs_delayed_ref_head to btrfs_qgroup_extent_record [BUG] Btrfs/139 will fail with a high probability if the testing machine (VM) has only 2G RAM. Resulting the final write success while it should fail due to EDQUOT, and the fs will have quota exceeding the limit by 16K. The simplified reproducer will be: (needs a 2G ram VM) $ mkfs.btrfs -f $dev $ mount $dev $mnt $ btrfs subv create $mnt/subv $ btrfs quota enable $mnt $ btrfs quota rescan -w $mnt $ btrfs qgroup limit -e 1G $mnt/subv $ for i in $(seq -w 1 8); do xfs_io -f -c "pwrite 0 128M" $mnt/subv/file_$i > /dev/null echo "file $i written" > /dev/kmsg done $ sync $ btrfs qgroup show -pcre --raw $mnt The last pwrite will not trigger EDQUOT and final 'qgroup show' will show something like: qgroupid rfer excl max_rfer max_excl parent child -------- ---- ---- -------- -------- ------ ----- 0/5 16384 16384 none none --- --- 0/256 1073758208 1073758208 none 1073741824 --- --- And 1073758208 is larger than > 1073741824. [CAUSE] It's a bug in btrfs qgroup data reserved space management. For quota limit, we must ensure that: reserved (data + metadata) + rfer/excl <= limit Since rfer/excl is only updated at transaction commmit time, reserved space needs to be taken special care. One important part of reserved space is data, and for a new data extent written to disk, we still need to take the reserved space until rfer/excl numbers get updated. Originally when an ordered extent finishes, we migrate the reserved qgroup data space from extent_io tree to delayed ref head of the data extent, expecting delayed ref will only be cleaned up at commit transaction time. However for small RAM machine, due to memory pressure dirty pages can be flushed back to disk without committing a transaction. The related events will be something like: file 1 written btrfs_finish_ordered_io: ino=258 ordered offset=0 len=54947840 btrfs_finish_ordered_io: ino=258 ordered offset=54947840 len=5636096 btrfs_finish_ordered_io: ino=258 ordered offset=61153280 len=57344 btrfs_finish_ordered_io: ino=258 ordered offset=61210624 len=8192 btrfs_finish_ordered_io: ino=258 ordered offset=60583936 len=569344 cleanup_ref_head: num_bytes=54947840 cleanup_ref_head: num_bytes=5636096 cleanup_ref_head: num_bytes=569344 cleanup_ref_head: num_bytes=57344 cleanup_ref_head: num_bytes=8192 ^^^^^^^^^^^^^^^^ This will free qgroup data reserved space file 2 written ... file 8 written cleanup_ref_head: num_bytes=8192 ... btrfs_commit_transaction <<< the only transaction committed during the test When file 2 is written, we have already freed 128M reserved qgroup data space for ino 258. Thus later write won't trigger EDQUOT. This allows us to write more data beyond qgroup limit. In my 2G ram VM, it could reach about 1.2G before hitting EDQUOT. [FIX] By moving reserved qgroup data space from btrfs_delayed_ref_head to btrfs_qgroup_extent_record, we can ensure that reserved qgroup data space won't be freed half way before commit transaction, thus fix the problem. Fixes: f64d5ca86821 ("btrfs: delayed_ref: Add new function to record reserved space into delayed ref") Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 15:15:12 +08:00
/*
* For qgroup reserved data space freeing.
*
* @data_rsv_refroot and @data_rsv will be recorded after
* BTRFS_ADD_DELAYED_EXTENT is called.
* And will be used to free reserved qgroup space at
* transaction commit time.
*/
u32 data_rsv; /* reserved data space needs to be freed */
u64 data_rsv_refroot; /* which root the reserved data belongs to */
struct ulist *old_roots;
};
btrfs: qgroup: Introduce per-root swapped blocks infrastructure To allow delayed subtree swap rescan, btrfs needs to record per-root information about which tree blocks get swapped. This patch introduces the required infrastructure. The designed workflow will be: 1) Record the subtree root block that gets swapped. During subtree swap: O = Old tree blocks N = New tree blocks reloc tree subvolume tree X Root Root / \ / \ NA OB OA OB / | | \ / | | \ NC ND OE OF OC OD OE OF In this case, NA and OA are going to be swapped, record (NA, OA) into subvolume tree X. 2) After subtree swap. reloc tree subvolume tree X Root Root / \ / \ OA OB NA OB / | | \ / | | \ OC OD OE OF NC ND OE OF 3a) COW happens for OB If we are going to COW tree block OB, we check OB's bytenr against tree X's swapped_blocks structure. If it doesn't fit any, nothing will happen. 3b) COW happens for NA Check NA's bytenr against tree X's swapped_blocks, and get a hit. Then we do subtree scan on both subtrees OA and NA. Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND). Then no matter what we do to subvolume tree X, qgroup numbers will still be correct. Then NA's record gets removed from X's swapped_blocks. 4) Transaction commit Any record in X's swapped_blocks gets removed, since there is no modification to swapped subtrees, no need to trigger heavy qgroup subtree rescan for them. This will introduce 128 bytes overhead for each btrfs_root even qgroup is not enabled. This is to reduce memory allocations and potential failures. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 15:15:16 +08:00
struct btrfs_qgroup_swapped_block {
struct rb_node node;
int level;
bool trace_leaf;
/* bytenr/generation of the tree block in subvolume tree after swap */
u64 subvol_bytenr;
u64 subvol_generation;
/* bytenr/generation of the tree block in reloc tree after swap */
u64 reloc_bytenr;
u64 reloc_generation;
u64 last_snapshot;
struct btrfs_key first_key;
};
/*
* Qgroup reservation types:
*
* DATA:
* space reserved for data
*
* META_PERTRANS:
* Space reserved for metadata (per-transaction)
* Due to the fact that qgroup data is only updated at transaction commit
* time, reserved space for metadata must be kept until transaction
* commits.
* Any metadata reserved that are used in btrfs_start_transaction() should
* be of this type.
*
* META_PREALLOC:
* There are cases where metadata space is reserved before starting
* transaction, and then btrfs_join_transaction() to get a trans handle.
* Any metadata reserved for such usage should be of this type.
* And after join_transaction() part (or all) of such reservation should
* be converted into META_PERTRANS.
*/
enum btrfs_qgroup_rsv_type {
BTRFS_QGROUP_RSV_DATA,
BTRFS_QGROUP_RSV_META_PERTRANS,
BTRFS_QGROUP_RSV_META_PREALLOC,
BTRFS_QGROUP_RSV_LAST,
};
/*
* Represents how many bytes we have reserved for this qgroup.
*
* Each type should have different reservation behavior.
* E.g, data follows its io_tree flag modification, while
* *currently* meta is just reserve-and-clear during transaction.
*
* TODO: Add new type for reservation which can survive transaction commit.
* Current metadata reservation behavior is not suitable for such case.
*/
struct btrfs_qgroup_rsv {
u64 values[BTRFS_QGROUP_RSV_LAST];
};
/*
* one struct for each qgroup, organized in fs_info->qgroup_tree.
*/
struct btrfs_qgroup {
u64 qgroupid;
/*
* state
*/
u64 rfer; /* referenced */
u64 rfer_cmpr; /* referenced compressed */
u64 excl; /* exclusive */
u64 excl_cmpr; /* exclusive compressed */
/*
* limits
*/
u64 lim_flags; /* which limits are set */
u64 max_rfer;
u64 max_excl;
u64 rsv_rfer;
u64 rsv_excl;
/*
* reservation tracking
*/
struct btrfs_qgroup_rsv rsv;
/*
* lists
*/
struct list_head groups; /* groups this group is member of */
struct list_head members; /* groups that are members of this group */
struct list_head dirty; /* dirty groups */
/*
* For qgroup iteration usage.
*
* The iteration list should always be empty until qgroup_iterator_add()
* is called. And should be reset to empty after the iteration is
* finished.
*/
struct list_head iterator;
/*
* For nested iterator usage.
*
* Here we support at most one level of nested iterator calls like:
*
* LIST_HEAD(all_qgroups);
* {
* LIST_HEAD(local_qgroups);
* qgroup_iterator_add(local_qgroups, qg);
* qgroup_iterator_nested_add(all_qgroups, qg);
* do_some_work(local_qgroups);
* qgroup_iterator_clean(local_qgroups);
* }
* do_some_work(all_qgroups);
* qgroup_iterator_nested_clean(all_qgroups);
*/
struct list_head nested_iterator;
struct rb_node node; /* tree of qgroups */
/*
* temp variables for accounting operations
* Refer to qgroup_shared_accounting() for details.
*/
u64 old_refcnt;
u64 new_refcnt;
/*
* Sysfs kobjectid
*/
struct kobject kobj;
};
struct btrfs_squota_delta {
/* The fstree root this delta counts against. */
u64 root;
/* The number of bytes in the extent being counted. */
u64 num_bytes;
/* The generation the extent was created in. */
u64 generation;
/* Whether we are using or freeing the extent. */
bool is_inc;
/* Whether the extent is data or metadata. */
bool is_data;
};
static inline u64 btrfs_qgroup_subvolid(u64 qgroupid)
{
return (qgroupid & ((1ULL << BTRFS_QGROUP_LEVEL_SHIFT) - 1));
}
/*
* For qgroup event trace points only
*/
enum {
ENUM_BIT(QGROUP_RESERVE),
ENUM_BIT(QGROUP_RELEASE),
ENUM_BIT(QGROUP_FREE),
};
enum btrfs_qgroup_mode {
BTRFS_QGROUP_MODE_DISABLED,
BTRFS_QGROUP_MODE_FULL,
BTRFS_QGROUP_MODE_SIMPLE
};
enum btrfs_qgroup_mode btrfs_qgroup_mode(const struct btrfs_fs_info *fs_info);
bool btrfs_qgroup_enabled(const struct btrfs_fs_info *fs_info);
bool btrfs_qgroup_full_accounting(const struct btrfs_fs_info *fs_info);
int btrfs_quota_enable(struct btrfs_fs_info *fs_info,
struct btrfs_ioctl_quota_ctl_args *quota_ctl_args);
int btrfs_quota_disable(struct btrfs_fs_info *fs_info);
Btrfs: rework qgroup accounting Currently qgroups account for space by intercepting delayed ref updates to fs trees. It does this by adding sequence numbers to delayed ref updates so that it can figure out how the tree looked before the update so we can adjust the counters properly. The problem with this is that it does not allow delayed refs to be merged, so if you say are defragging an extent with 5k snapshots pointing to it we will thrash the delayed ref lock because we need to go back and manually merge these things together. Instead we want to process quota changes when we know they are going to happen, like when we first allocate an extent, we free a reference for an extent, we add new references etc. This patch accomplishes this by only adding qgroup operations for real ref changes. We only modify the sequence number when we need to lookup roots for bytenrs, this reduces the amount of churn on the sequence number and allows us to merge delayed refs as we add them most of the time. This patch encompasses a bunch of architectural changes 1) qgroup ref operations: instead of tracking qgroup operations through the delayed refs we simply add new ref operations whenever we notice that we need to when we've modified the refs themselves. 2) tree mod seq: we no longer have this separation of major/minor counters. this makes the sequence number stuff much more sane and we can remove some locking that was needed to protect the counter. 3) delayed ref seq: we now read the tree mod seq number and use that as our sequence. This means each new delayed ref doesn't have it's own unique sequence number, rather whenever we go to lookup backrefs we inc the sequence number so we can make sure to keep any new operations from screwing up our world view at that given point. This allows us to merge delayed refs during runtime. With all of these changes the delayed ref stuff is a little saner and the qgroup accounting stuff no longer goes negative in some cases like it was before. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-14 08:30:47 +08:00
int btrfs_qgroup_rescan(struct btrfs_fs_info *fs_info);
void btrfs_qgroup_rescan_resume(struct btrfs_fs_info *fs_info);
int btrfs_qgroup_wait_for_completion(struct btrfs_fs_info *fs_info,
bool interruptible);
int btrfs_add_qgroup_relation(struct btrfs_trans_handle *trans, u64 src, u64 dst);
int btrfs_del_qgroup_relation(struct btrfs_trans_handle *trans, u64 src,
u64 dst);
int btrfs_create_qgroup(struct btrfs_trans_handle *trans, u64 qgroupid);
int btrfs_remove_qgroup(struct btrfs_trans_handle *trans, u64 qgroupid);
int btrfs_qgroup_cleanup_dropped_subvolume(struct btrfs_fs_info *fs_info, u64 subvolid);
int btrfs_limit_qgroup(struct btrfs_trans_handle *trans, u64 qgroupid,
Btrfs: rework qgroup accounting Currently qgroups account for space by intercepting delayed ref updates to fs trees. It does this by adding sequence numbers to delayed ref updates so that it can figure out how the tree looked before the update so we can adjust the counters properly. The problem with this is that it does not allow delayed refs to be merged, so if you say are defragging an extent with 5k snapshots pointing to it we will thrash the delayed ref lock because we need to go back and manually merge these things together. Instead we want to process quota changes when we know they are going to happen, like when we first allocate an extent, we free a reference for an extent, we add new references etc. This patch accomplishes this by only adding qgroup operations for real ref changes. We only modify the sequence number when we need to lookup roots for bytenrs, this reduces the amount of churn on the sequence number and allows us to merge delayed refs as we add them most of the time. This patch encompasses a bunch of architectural changes 1) qgroup ref operations: instead of tracking qgroup operations through the delayed refs we simply add new ref operations whenever we notice that we need to when we've modified the refs themselves. 2) tree mod seq: we no longer have this separation of major/minor counters. this makes the sequence number stuff much more sane and we can remove some locking that was needed to protect the counter. 3) delayed ref seq: we now read the tree mod seq number and use that as our sequence. This means each new delayed ref doesn't have it's own unique sequence number, rather whenever we go to lookup backrefs we inc the sequence number so we can make sure to keep any new operations from screwing up our world view at that given point. This allows us to merge delayed refs during runtime. With all of these changes the delayed ref stuff is a little saner and the qgroup accounting stuff no longer goes negative in some cases like it was before. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-14 08:30:47 +08:00
struct btrfs_qgroup_limit *limit);
int btrfs_read_qgroup_config(struct btrfs_fs_info *fs_info);
void btrfs_free_qgroup_config(struct btrfs_fs_info *fs_info);
int btrfs_qgroup_trace_extent_nolock(
struct btrfs_fs_info *fs_info,
struct btrfs_delayed_ref_root *delayed_refs,
struct btrfs_qgroup_extent_record *record);
btrfs: fix lock inversion problem when doing qgroup extent tracing At btrfs_qgroup_trace_extent_post() we call btrfs_find_all_roots() with a NULL value as the transaction handle argument, which makes that function take the commit_root_sem semaphore, which is necessary when we don't hold a transaction handle or any other mechanism to prevent a transaction commit from wiping out commit roots. However btrfs_qgroup_trace_extent_post() can be called in a context where we are holding a write lock on an extent buffer from a subvolume tree, namely from btrfs_truncate_inode_items(), called either during truncate or unlink operations. In this case we end up with a lock inversion problem because the commit_root_sem is a higher level lock, always supposed to be acquired before locking any extent buffer. Lockdep detects this lock inversion problem since we switched the extent buffer locks from custom locks to semaphores, and when running btrfs/158 from fstests, it reported the following trace: [ 9057.626435] ====================================================== [ 9057.627541] WARNING: possible circular locking dependency detected [ 9057.628334] 5.14.0-rc2-btrfs-next-93 #1 Not tainted [ 9057.628961] ------------------------------------------------------ [ 9057.629867] kworker/u16:4/30781 is trying to acquire lock: [ 9057.630824] ffff8e2590f58760 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.632542] but task is already holding lock: [ 9057.633551] ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs] [ 9057.635255] which lock already depends on the new lock. [ 9057.636292] the existing dependency chain (in reverse order) is: [ 9057.637240] -> #1 (&fs_info->commit_root_sem){++++}-{3:3}: [ 9057.638138] down_read+0x46/0x140 [ 9057.638648] btrfs_find_all_roots+0x41/0x80 [btrfs] [ 9057.639398] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] [ 9057.640283] btrfs_add_delayed_data_ref+0x418/0x490 [btrfs] [ 9057.641114] btrfs_free_extent+0x35/0xb0 [btrfs] [ 9057.641819] btrfs_truncate_inode_items+0x424/0xf70 [btrfs] [ 9057.642643] btrfs_evict_inode+0x454/0x4f0 [btrfs] [ 9057.643418] evict+0xcf/0x1d0 [ 9057.643895] do_unlinkat+0x1e9/0x300 [ 9057.644525] do_syscall_64+0x3b/0xc0 [ 9057.645110] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 9057.645835] -> #0 (btrfs-tree-00){++++}-{3:3}: [ 9057.646600] __lock_acquire+0x130e/0x2210 [ 9057.647248] lock_acquire+0xd7/0x310 [ 9057.647773] down_read_nested+0x4b/0x140 [ 9057.648350] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.649175] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 9057.650010] btrfs_search_slot+0x537/0xc00 [btrfs] [ 9057.650849] scrub_print_warning_inode+0x89/0x370 [btrfs] [ 9057.651733] iterate_extent_inodes+0x1e3/0x280 [btrfs] [ 9057.652501] scrub_print_warning+0x15d/0x2f0 [btrfs] [ 9057.653264] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs] [ 9057.654295] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs] [ 9057.655111] btrfs_work_helper+0xf8/0x400 [btrfs] [ 9057.655831] process_one_work+0x247/0x5a0 [ 9057.656425] worker_thread+0x55/0x3c0 [ 9057.656993] kthread+0x155/0x180 [ 9057.657494] ret_from_fork+0x22/0x30 [ 9057.658030] other info that might help us debug this: [ 9057.659064] Possible unsafe locking scenario: [ 9057.659824] CPU0 CPU1 [ 9057.660402] ---- ---- [ 9057.660988] lock(&fs_info->commit_root_sem); [ 9057.661581] lock(btrfs-tree-00); [ 9057.662348] lock(&fs_info->commit_root_sem); [ 9057.663254] lock(btrfs-tree-00); [ 9057.663690] *** DEADLOCK *** [ 9057.664437] 4 locks held by kworker/u16:4/30781: [ 9057.665023] #0: ffff8e25922a1148 ((wq_completion)btrfs-scrub){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0 [ 9057.666260] #1: ffffabb3451ffe70 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0 [ 9057.667639] #2: ffff8e25922da198 (&ret->mutex){+.+.}-{3:3}, at: scrub_handle_errored_block.isra.0+0x5d2/0x1640 [btrfs] [ 9057.669017] #3: ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs] [ 9057.670408] stack backtrace: [ 9057.670976] CPU: 7 PID: 30781 Comm: kworker/u16:4 Not tainted 5.14.0-rc2-btrfs-next-93 #1 [ 9057.672030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 9057.673492] Workqueue: btrfs-scrub btrfs_work_helper [btrfs] [ 9057.674258] Call Trace: [ 9057.674588] dump_stack_lvl+0x57/0x72 [ 9057.675083] check_noncircular+0xf3/0x110 [ 9057.675611] __lock_acquire+0x130e/0x2210 [ 9057.676132] lock_acquire+0xd7/0x310 [ 9057.676605] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.677313] ? lock_is_held_type+0xe8/0x140 [ 9057.677849] down_read_nested+0x4b/0x140 [ 9057.678349] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.679068] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.679760] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 9057.680458] btrfs_search_slot+0x537/0xc00 [btrfs] [ 9057.681083] ? _raw_spin_unlock+0x29/0x40 [ 9057.681594] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs] [ 9057.682336] scrub_print_warning_inode+0x89/0x370 [btrfs] [ 9057.683058] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs] [ 9057.683834] ? scrub_write_block_to_dev_replace+0xb0/0xb0 [btrfs] [ 9057.684632] iterate_extent_inodes+0x1e3/0x280 [btrfs] [ 9057.685316] scrub_print_warning+0x15d/0x2f0 [btrfs] [ 9057.685977] ? ___ratelimit+0xa4/0x110 [ 9057.686460] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs] [ 9057.687316] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs] [ 9057.688021] btrfs_work_helper+0xf8/0x400 [btrfs] [ 9057.688649] ? lock_is_held_type+0xe8/0x140 [ 9057.689180] process_one_work+0x247/0x5a0 [ 9057.689696] worker_thread+0x55/0x3c0 [ 9057.690175] ? process_one_work+0x5a0/0x5a0 [ 9057.690731] kthread+0x155/0x180 [ 9057.691158] ? set_kthread_struct+0x40/0x40 [ 9057.691697] ret_from_fork+0x22/0x30 Fix this by making btrfs_find_all_roots() never attempt to lock the commit_root_sem when it is called from btrfs_qgroup_trace_extent_post(). We can't just pass a non-NULL transaction handle to btrfs_find_all_roots() from btrfs_qgroup_trace_extent_post(), because that would make backref lookup not use commit roots and acquire read locks on extent buffers, and therefore could deadlock when btrfs_qgroup_trace_extent_post() is called from the btrfs_truncate_inode_items() code path which has acquired a write lock on an extent buffer of the subvolume btree. CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-22 00:31:48 +08:00
int btrfs_qgroup_trace_extent_post(struct btrfs_trans_handle *trans,
struct btrfs_qgroup_extent_record *qrecord);
int btrfs_qgroup_trace_extent(struct btrfs_trans_handle *trans, u64 bytenr,
u64 num_bytes);
int btrfs_qgroup_trace_leaf_items(struct btrfs_trans_handle *trans,
struct extent_buffer *eb);
int btrfs_qgroup_trace_subtree(struct btrfs_trans_handle *trans,
struct extent_buffer *root_eb,
u64 root_gen, int root_level);
int btrfs_qgroup_account_extent(struct btrfs_trans_handle *trans, u64 bytenr,
u64 num_bytes, struct ulist *old_roots,
struct ulist *new_roots);
int btrfs_qgroup_account_extents(struct btrfs_trans_handle *trans);
int btrfs_run_qgroups(struct btrfs_trans_handle *trans);
btrfs: qgroup: validate btrfs_qgroup_inherit parameter [BUG] Currently btrfs can create subvolume with an invalid qgroup inherit without triggering any error: # mkfs.btrfs -O quota -f $dev # mount $dev $mnt # btrfs subvolume create -i 2/0 $mnt/subv1 # btrfs qgroup show -prce --sync $mnt Qgroupid Referenced Exclusive Path -------- ---------- --------- ---- 0/5 16.00KiB 16.00KiB <toplevel> 0/256 16.00KiB 16.00KiB subv1 [CAUSE] We only do a very basic size check for btrfs_qgroup_inherit structure, but never really verify if the values are correct. Thus in btrfs_qgroup_inherit() function, we have to skip non-existing qgroups, and never return any error. [FIX] Fix the behavior and introduce extra checks: - Introduce early check for btrfs_qgroup_inherit structure Not only the size, but also all the qgroup ids would be verified. And the timing is very early, so we can return error early. This early check is very important for snapshot creation, as snapshot is delayed to transaction commit. - Drop support for btrfs_qgroup_inherit::num_ref_copies and num_excl_copies Those two members are used to specify to copy refr/excl numbers from other qgroups. This would definitely mark qgroup inconsistent, and btrfs-progs has dropped the support for them for a long time. It's time to drop the support for kernel. - Verify the supported btrfs_qgroup_inherit::flags Just in case we want to add extra flags for btrfs_qgroup_inherit. Now above subvolume creation would fail with -ENOENT other than silently ignore the non-existing qgroup. CC: stable@vger.kernel.org # 6.7+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-02-27 11:15:35 +08:00
int btrfs_qgroup_check_inherit(struct btrfs_fs_info *fs_info,
struct btrfs_qgroup_inherit *inherit,
size_t size);
int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, u64 srcid,
u64 objectid, u64 inode_rootid,
struct btrfs_qgroup_inherit *inherit);
void btrfs_qgroup_free_refroot(struct btrfs_fs_info *fs_info,
u64 ref_root, u64 num_bytes,
enum btrfs_qgroup_rsv_type type);
Btrfs: rework qgroup accounting Currently qgroups account for space by intercepting delayed ref updates to fs trees. It does this by adding sequence numbers to delayed ref updates so that it can figure out how the tree looked before the update so we can adjust the counters properly. The problem with this is that it does not allow delayed refs to be merged, so if you say are defragging an extent with 5k snapshots pointing to it we will thrash the delayed ref lock because we need to go back and manually merge these things together. Instead we want to process quota changes when we know they are going to happen, like when we first allocate an extent, we free a reference for an extent, we add new references etc. This patch accomplishes this by only adding qgroup operations for real ref changes. We only modify the sequence number when we need to lookup roots for bytenrs, this reduces the amount of churn on the sequence number and allows us to merge delayed refs as we add them most of the time. This patch encompasses a bunch of architectural changes 1) qgroup ref operations: instead of tracking qgroup operations through the delayed refs we simply add new ref operations whenever we notice that we need to when we've modified the refs themselves. 2) tree mod seq: we no longer have this separation of major/minor counters. this makes the sequence number stuff much more sane and we can remove some locking that was needed to protect the counter. 3) delayed ref seq: we now read the tree mod seq number and use that as our sequence. This means each new delayed ref doesn't have it's own unique sequence number, rather whenever we go to lookup backrefs we inc the sequence number so we can make sure to keep any new operations from screwing up our world view at that given point. This allows us to merge delayed refs during runtime. With all of these changes the delayed ref stuff is a little saner and the qgroup accounting stuff no longer goes negative in some cases like it was before. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-14 08:30:47 +08:00
#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
int btrfs_verify_qgroup_counts(const struct btrfs_fs_info *fs_info, u64 qgroupid,
Btrfs: rework qgroup accounting Currently qgroups account for space by intercepting delayed ref updates to fs trees. It does this by adding sequence numbers to delayed ref updates so that it can figure out how the tree looked before the update so we can adjust the counters properly. The problem with this is that it does not allow delayed refs to be merged, so if you say are defragging an extent with 5k snapshots pointing to it we will thrash the delayed ref lock because we need to go back and manually merge these things together. Instead we want to process quota changes when we know they are going to happen, like when we first allocate an extent, we free a reference for an extent, we add new references etc. This patch accomplishes this by only adding qgroup operations for real ref changes. We only modify the sequence number when we need to lookup roots for bytenrs, this reduces the amount of churn on the sequence number and allows us to merge delayed refs as we add them most of the time. This patch encompasses a bunch of architectural changes 1) qgroup ref operations: instead of tracking qgroup operations through the delayed refs we simply add new ref operations whenever we notice that we need to when we've modified the refs themselves. 2) tree mod seq: we no longer have this separation of major/minor counters. this makes the sequence number stuff much more sane and we can remove some locking that was needed to protect the counter. 3) delayed ref seq: we now read the tree mod seq number and use that as our sequence. This means each new delayed ref doesn't have it's own unique sequence number, rather whenever we go to lookup backrefs we inc the sequence number so we can make sure to keep any new operations from screwing up our world view at that given point. This allows us to merge delayed refs during runtime. With all of these changes the delayed ref stuff is a little saner and the qgroup accounting stuff no longer goes negative in some cases like it was before. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-14 08:30:47 +08:00
u64 rfer, u64 excl);
#endif
/* New io_tree based accurate qgroup reserve API */
int btrfs_qgroup_reserve_data(struct btrfs_inode *inode,
struct extent_changeset **reserved, u64 start, u64 len);
int btrfs_qgroup_release_data(struct btrfs_inode *inode, u64 start, u64 len, u64 *released);
int btrfs_qgroup_free_data(struct btrfs_inode *inode,
struct extent_changeset *reserved, u64 start,
u64 len, u64 *freed);
int btrfs_qgroup_reserve_meta(struct btrfs_root *root, int num_bytes,
enum btrfs_qgroup_rsv_type type, bool enforce);
int __btrfs_qgroup_reserve_meta(struct btrfs_root *root, int num_bytes,
btrfs: avoid blocking on space revervation when doing nowait dio writes When doing a NOWAIT direct IO write, if we can NOCOW then it means we can proceed with the non-blocking, NOWAIT path. However reserving the metadata space and qgroup meta space can often result in blocking - flushing delalloc, wait for ordered extents to complete, trigger transaction commits, etc, going against the semantics of a NOWAIT write. So make the NOWAIT write path to try to reserve all the metadata it needs without resulting in a blocking behaviour - if we get -ENOSPC or -EDQUOT then return -EAGAIN to make the caller fallback to a blocking direct IO write. This is part of a patchset comprised of the following patches: btrfs: avoid blocking on page locks with nowait dio on compressed range btrfs: avoid blocking nowait dio when locking file range btrfs: avoid double nocow check when doing nowait dio writes btrfs: stop allocating a path when checking if cross reference exists btrfs: free path at can_nocow_extent() before checking for checksum items btrfs: release path earlier at can_nocow_extent() btrfs: avoid blocking when allocating context for nowait dio read/write btrfs: avoid blocking on space revervation when doing nowait dio writes The following test was run before and after applying this patchset: $ cat io-uring-nodatacow-test.sh #!/bin/bash DEV=/dev/sdc MNT=/mnt/sdc MOUNT_OPTIONS="-o ssd -o nodatacow" MKFS_OPTIONS="-R free-space-tree -O no-holes" NUM_JOBS=4 FILE_SIZE=8G RUN_TIME=300 cat <<EOF > /tmp/fio-job.ini [io_uring_rw] rw=randrw fsync=0 fallocate=posix group_reporting=1 direct=1 ioengine=io_uring iodepth=64 bssplit=4k/20:8k/20:16k/20:32k/10:64k/10:128k/5:256k/5:512k/5:1m/5 filesize=$FILE_SIZE runtime=$RUN_TIME time_based filename=foobar directory=$MNT numjobs=$NUM_JOBS thread EOF echo performance | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The test was run a 12 cores box with 64G of ram, using a non-debug kernel config (Debian's default config) and a spinning disk. Result before the patchset: READ: bw=407MiB/s (427MB/s), 407MiB/s-407MiB/s (427MB/s-427MB/s), io=119GiB (128GB), run=300175-300175msec WRITE: bw=407MiB/s (427MB/s), 407MiB/s-407MiB/s (427MB/s-427MB/s), io=119GiB (128GB), run=300175-300175msec Result after the patchset: READ: bw=436MiB/s (457MB/s), 436MiB/s-436MiB/s (457MB/s-457MB/s), io=128GiB (137GB), run=300044-300044msec WRITE: bw=435MiB/s (456MB/s), 435MiB/s-435MiB/s (456MB/s-456MB/s), io=128GiB (137GB), run=300044-300044msec That's about +7.2% throughput for reads and +6.9% for writes. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-24 00:19:30 +08:00
enum btrfs_qgroup_rsv_type type, bool enforce,
bool noflush);
/* Reserve metadata space for pertrans and prealloc type */
static inline int btrfs_qgroup_reserve_meta_pertrans(struct btrfs_root *root,
int num_bytes, bool enforce)
{
return __btrfs_qgroup_reserve_meta(root, num_bytes,
btrfs: avoid blocking on space revervation when doing nowait dio writes When doing a NOWAIT direct IO write, if we can NOCOW then it means we can proceed with the non-blocking, NOWAIT path. However reserving the metadata space and qgroup meta space can often result in blocking - flushing delalloc, wait for ordered extents to complete, trigger transaction commits, etc, going against the semantics of a NOWAIT write. So make the NOWAIT write path to try to reserve all the metadata it needs without resulting in a blocking behaviour - if we get -ENOSPC or -EDQUOT then return -EAGAIN to make the caller fallback to a blocking direct IO write. This is part of a patchset comprised of the following patches: btrfs: avoid blocking on page locks with nowait dio on compressed range btrfs: avoid blocking nowait dio when locking file range btrfs: avoid double nocow check when doing nowait dio writes btrfs: stop allocating a path when checking if cross reference exists btrfs: free path at can_nocow_extent() before checking for checksum items btrfs: release path earlier at can_nocow_extent() btrfs: avoid blocking when allocating context for nowait dio read/write btrfs: avoid blocking on space revervation when doing nowait dio writes The following test was run before and after applying this patchset: $ cat io-uring-nodatacow-test.sh #!/bin/bash DEV=/dev/sdc MNT=/mnt/sdc MOUNT_OPTIONS="-o ssd -o nodatacow" MKFS_OPTIONS="-R free-space-tree -O no-holes" NUM_JOBS=4 FILE_SIZE=8G RUN_TIME=300 cat <<EOF > /tmp/fio-job.ini [io_uring_rw] rw=randrw fsync=0 fallocate=posix group_reporting=1 direct=1 ioengine=io_uring iodepth=64 bssplit=4k/20:8k/20:16k/20:32k/10:64k/10:128k/5:256k/5:512k/5:1m/5 filesize=$FILE_SIZE runtime=$RUN_TIME time_based filename=foobar directory=$MNT numjobs=$NUM_JOBS thread EOF echo performance | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The test was run a 12 cores box with 64G of ram, using a non-debug kernel config (Debian's default config) and a spinning disk. Result before the patchset: READ: bw=407MiB/s (427MB/s), 407MiB/s-407MiB/s (427MB/s-427MB/s), io=119GiB (128GB), run=300175-300175msec WRITE: bw=407MiB/s (427MB/s), 407MiB/s-407MiB/s (427MB/s-427MB/s), io=119GiB (128GB), run=300175-300175msec Result after the patchset: READ: bw=436MiB/s (457MB/s), 436MiB/s-436MiB/s (457MB/s-457MB/s), io=128GiB (137GB), run=300044-300044msec WRITE: bw=435MiB/s (456MB/s), 435MiB/s-435MiB/s (456MB/s-456MB/s), io=128GiB (137GB), run=300044-300044msec That's about +7.2% throughput for reads and +6.9% for writes. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-24 00:19:30 +08:00
BTRFS_QGROUP_RSV_META_PERTRANS,
enforce, false);
}
static inline int btrfs_qgroup_reserve_meta_prealloc(struct btrfs_root *root,
btrfs: avoid blocking on space revervation when doing nowait dio writes When doing a NOWAIT direct IO write, if we can NOCOW then it means we can proceed with the non-blocking, NOWAIT path. However reserving the metadata space and qgroup meta space can often result in blocking - flushing delalloc, wait for ordered extents to complete, trigger transaction commits, etc, going against the semantics of a NOWAIT write. So make the NOWAIT write path to try to reserve all the metadata it needs without resulting in a blocking behaviour - if we get -ENOSPC or -EDQUOT then return -EAGAIN to make the caller fallback to a blocking direct IO write. This is part of a patchset comprised of the following patches: btrfs: avoid blocking on page locks with nowait dio on compressed range btrfs: avoid blocking nowait dio when locking file range btrfs: avoid double nocow check when doing nowait dio writes btrfs: stop allocating a path when checking if cross reference exists btrfs: free path at can_nocow_extent() before checking for checksum items btrfs: release path earlier at can_nocow_extent() btrfs: avoid blocking when allocating context for nowait dio read/write btrfs: avoid blocking on space revervation when doing nowait dio writes The following test was run before and after applying this patchset: $ cat io-uring-nodatacow-test.sh #!/bin/bash DEV=/dev/sdc MNT=/mnt/sdc MOUNT_OPTIONS="-o ssd -o nodatacow" MKFS_OPTIONS="-R free-space-tree -O no-holes" NUM_JOBS=4 FILE_SIZE=8G RUN_TIME=300 cat <<EOF > /tmp/fio-job.ini [io_uring_rw] rw=randrw fsync=0 fallocate=posix group_reporting=1 direct=1 ioengine=io_uring iodepth=64 bssplit=4k/20:8k/20:16k/20:32k/10:64k/10:128k/5:256k/5:512k/5:1m/5 filesize=$FILE_SIZE runtime=$RUN_TIME time_based filename=foobar directory=$MNT numjobs=$NUM_JOBS thread EOF echo performance | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The test was run a 12 cores box with 64G of ram, using a non-debug kernel config (Debian's default config) and a spinning disk. Result before the patchset: READ: bw=407MiB/s (427MB/s), 407MiB/s-407MiB/s (427MB/s-427MB/s), io=119GiB (128GB), run=300175-300175msec WRITE: bw=407MiB/s (427MB/s), 407MiB/s-407MiB/s (427MB/s-427MB/s), io=119GiB (128GB), run=300175-300175msec Result after the patchset: READ: bw=436MiB/s (457MB/s), 436MiB/s-436MiB/s (457MB/s-457MB/s), io=128GiB (137GB), run=300044-300044msec WRITE: bw=435MiB/s (456MB/s), 435MiB/s-435MiB/s (456MB/s-456MB/s), io=128GiB (137GB), run=300044-300044msec That's about +7.2% throughput for reads and +6.9% for writes. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-24 00:19:30 +08:00
int num_bytes, bool enforce,
bool noflush)
{
return __btrfs_qgroup_reserve_meta(root, num_bytes,
btrfs: avoid blocking on space revervation when doing nowait dio writes When doing a NOWAIT direct IO write, if we can NOCOW then it means we can proceed with the non-blocking, NOWAIT path. However reserving the metadata space and qgroup meta space can often result in blocking - flushing delalloc, wait for ordered extents to complete, trigger transaction commits, etc, going against the semantics of a NOWAIT write. So make the NOWAIT write path to try to reserve all the metadata it needs without resulting in a blocking behaviour - if we get -ENOSPC or -EDQUOT then return -EAGAIN to make the caller fallback to a blocking direct IO write. This is part of a patchset comprised of the following patches: btrfs: avoid blocking on page locks with nowait dio on compressed range btrfs: avoid blocking nowait dio when locking file range btrfs: avoid double nocow check when doing nowait dio writes btrfs: stop allocating a path when checking if cross reference exists btrfs: free path at can_nocow_extent() before checking for checksum items btrfs: release path earlier at can_nocow_extent() btrfs: avoid blocking when allocating context for nowait dio read/write btrfs: avoid blocking on space revervation when doing nowait dio writes The following test was run before and after applying this patchset: $ cat io-uring-nodatacow-test.sh #!/bin/bash DEV=/dev/sdc MNT=/mnt/sdc MOUNT_OPTIONS="-o ssd -o nodatacow" MKFS_OPTIONS="-R free-space-tree -O no-holes" NUM_JOBS=4 FILE_SIZE=8G RUN_TIME=300 cat <<EOF > /tmp/fio-job.ini [io_uring_rw] rw=randrw fsync=0 fallocate=posix group_reporting=1 direct=1 ioengine=io_uring iodepth=64 bssplit=4k/20:8k/20:16k/20:32k/10:64k/10:128k/5:256k/5:512k/5:1m/5 filesize=$FILE_SIZE runtime=$RUN_TIME time_based filename=foobar directory=$MNT numjobs=$NUM_JOBS thread EOF echo performance | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The test was run a 12 cores box with 64G of ram, using a non-debug kernel config (Debian's default config) and a spinning disk. Result before the patchset: READ: bw=407MiB/s (427MB/s), 407MiB/s-407MiB/s (427MB/s-427MB/s), io=119GiB (128GB), run=300175-300175msec WRITE: bw=407MiB/s (427MB/s), 407MiB/s-407MiB/s (427MB/s-427MB/s), io=119GiB (128GB), run=300175-300175msec Result after the patchset: READ: bw=436MiB/s (457MB/s), 436MiB/s-436MiB/s (457MB/s-457MB/s), io=128GiB (137GB), run=300044-300044msec WRITE: bw=435MiB/s (456MB/s), 435MiB/s-435MiB/s (456MB/s-456MB/s), io=128GiB (137GB), run=300044-300044msec That's about +7.2% throughput for reads and +6.9% for writes. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-24 00:19:30 +08:00
BTRFS_QGROUP_RSV_META_PREALLOC,
enforce, noflush);
}
void __btrfs_qgroup_free_meta(struct btrfs_root *root, int num_bytes,
enum btrfs_qgroup_rsv_type type);
/* Free per-transaction meta reservation for error handling */
static inline void btrfs_qgroup_free_meta_pertrans(struct btrfs_root *root,
int num_bytes)
{
__btrfs_qgroup_free_meta(root, num_bytes,
BTRFS_QGROUP_RSV_META_PERTRANS);
}
/* Pre-allocated meta reservation can be freed at need */
static inline void btrfs_qgroup_free_meta_prealloc(struct btrfs_root *root,
int num_bytes)
{
__btrfs_qgroup_free_meta(root, num_bytes,
BTRFS_QGROUP_RSV_META_PREALLOC);
}
void btrfs_qgroup_free_meta_all_pertrans(struct btrfs_root *root);
void btrfs_qgroup_convert_reserved_meta(struct btrfs_root *root, int num_bytes);
void btrfs_qgroup_check_reserved_leak(struct btrfs_inode *inode);
btrfs: qgroup: Introduce per-root swapped blocks infrastructure To allow delayed subtree swap rescan, btrfs needs to record per-root information about which tree blocks get swapped. This patch introduces the required infrastructure. The designed workflow will be: 1) Record the subtree root block that gets swapped. During subtree swap: O = Old tree blocks N = New tree blocks reloc tree subvolume tree X Root Root / \ / \ NA OB OA OB / | | \ / | | \ NC ND OE OF OC OD OE OF In this case, NA and OA are going to be swapped, record (NA, OA) into subvolume tree X. 2) After subtree swap. reloc tree subvolume tree X Root Root / \ / \ OA OB NA OB / | | \ / | | \ OC OD OE OF NC ND OE OF 3a) COW happens for OB If we are going to COW tree block OB, we check OB's bytenr against tree X's swapped_blocks structure. If it doesn't fit any, nothing will happen. 3b) COW happens for NA Check NA's bytenr against tree X's swapped_blocks, and get a hit. Then we do subtree scan on both subtrees OA and NA. Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND). Then no matter what we do to subvolume tree X, qgroup numbers will still be correct. Then NA's record gets removed from X's swapped_blocks. 4) Transaction commit Any record in X's swapped_blocks gets removed, since there is no modification to swapped subtrees, no need to trigger heavy qgroup subtree rescan for them. This will introduce 128 bytes overhead for each btrfs_root even qgroup is not enabled. This is to reduce memory allocations and potential failures. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 15:15:16 +08:00
/* btrfs_qgroup_swapped_blocks related functions */
void btrfs_qgroup_init_swapped_blocks(
struct btrfs_qgroup_swapped_blocks *swapped_blocks);
void btrfs_qgroup_clean_swapped_blocks(struct btrfs_root *root);
int btrfs_qgroup_add_swapped_blocks(struct btrfs_trans_handle *trans,
struct btrfs_root *subvol_root,
struct btrfs_block_group *bg,
btrfs: qgroup: Introduce per-root swapped blocks infrastructure To allow delayed subtree swap rescan, btrfs needs to record per-root information about which tree blocks get swapped. This patch introduces the required infrastructure. The designed workflow will be: 1) Record the subtree root block that gets swapped. During subtree swap: O = Old tree blocks N = New tree blocks reloc tree subvolume tree X Root Root / \ / \ NA OB OA OB / | | \ / | | \ NC ND OE OF OC OD OE OF In this case, NA and OA are going to be swapped, record (NA, OA) into subvolume tree X. 2) After subtree swap. reloc tree subvolume tree X Root Root / \ / \ OA OB NA OB / | | \ / | | \ OC OD OE OF NC ND OE OF 3a) COW happens for OB If we are going to COW tree block OB, we check OB's bytenr against tree X's swapped_blocks structure. If it doesn't fit any, nothing will happen. 3b) COW happens for NA Check NA's bytenr against tree X's swapped_blocks, and get a hit. Then we do subtree scan on both subtrees OA and NA. Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND). Then no matter what we do to subvolume tree X, qgroup numbers will still be correct. Then NA's record gets removed from X's swapped_blocks. 4) Transaction commit Any record in X's swapped_blocks gets removed, since there is no modification to swapped subtrees, no need to trigger heavy qgroup subtree rescan for them. This will introduce 128 bytes overhead for each btrfs_root even qgroup is not enabled. This is to reduce memory allocations and potential failures. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 15:15:16 +08:00
struct extent_buffer *subvol_parent, int subvol_slot,
struct extent_buffer *reloc_parent, int reloc_slot,
u64 last_snapshot);
btrfs: qgroup: Use delayed subtree rescan for balance Before this patch, qgroup code traces the whole subtree of subvolume and reloc trees unconditionally. This makes qgroup numbers consistent, but it could cause tons of unnecessary extent tracing, which causes a lot of overhead. However for subtree swap of balance, just swap both subtrees because they contain the same contents and tree structure, so qgroup numbers won't change. It's the race window between subtree swap and transaction commit could cause qgroup number change. This patch will delay the qgroup subtree scan until COW happens for the subtree root. So if there is no other operations for the fs, balance won't cause extra qgroup overhead. (best case scenario) Depending on the workload, most of the subtree scan can still be avoided. Only for worst case scenario, it will fall back to old subtree swap overhead. (scan all swapped subtrees) [[Benchmark]] Hardware: VM 4G vRAM, 8 vCPUs, disk is using 'unsafe' cache mode, backing device is SAMSUNG 850 evo SSD. Host has 16G ram. Mkfs parameter: --nodesize 4K (To bump up tree size) Initial subvolume contents: 4G data copied from /usr and /lib. (With enough regular small files) Snapshots: 16 snapshots of the original subvolume. each snapshot has 3 random files modified. balance parameter: -m So the content should be pretty similar to a real world root fs layout. And after file system population, there is no other activity, so it should be the best case scenario. | v4.20-rc1 | w/ patchset | diff ----------------------------------------------------------------------- relocated extents | 22615 | 22457 | -0.1% qgroup dirty extents | 163457 | 121606 | -25.6% time (sys) | 22.884s | 18.842s | -17.6% time (real) | 27.724s | 22.884s | -17.5% Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 15:15:17 +08:00
int btrfs_qgroup_trace_subtree_after_cow(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct extent_buffer *eb);
void btrfs_qgroup_destroy_extent_records(struct btrfs_transaction *trans);
bool btrfs_check_quota_leak(const struct btrfs_fs_info *fs_info);
void btrfs_free_squota_rsv(struct btrfs_fs_info *fs_info, u64 root, u64 rsv_bytes);
int btrfs_record_squota_delta(struct btrfs_fs_info *fs_info,
const struct btrfs_squota_delta *delta);
btrfs: qgroup: Introduce per-root swapped blocks infrastructure To allow delayed subtree swap rescan, btrfs needs to record per-root information about which tree blocks get swapped. This patch introduces the required infrastructure. The designed workflow will be: 1) Record the subtree root block that gets swapped. During subtree swap: O = Old tree blocks N = New tree blocks reloc tree subvolume tree X Root Root / \ / \ NA OB OA OB / | | \ / | | \ NC ND OE OF OC OD OE OF In this case, NA and OA are going to be swapped, record (NA, OA) into subvolume tree X. 2) After subtree swap. reloc tree subvolume tree X Root Root / \ / \ OA OB NA OB / | | \ / | | \ OC OD OE OF NC ND OE OF 3a) COW happens for OB If we are going to COW tree block OB, we check OB's bytenr against tree X's swapped_blocks structure. If it doesn't fit any, nothing will happen. 3b) COW happens for NA Check NA's bytenr against tree X's swapped_blocks, and get a hit. Then we do subtree scan on both subtrees OA and NA. Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND). Then no matter what we do to subvolume tree X, qgroup numbers will still be correct. Then NA's record gets removed from X's swapped_blocks. 4) Transaction commit Any record in X's swapped_blocks gets removed, since there is no modification to swapped subtrees, no need to trigger heavy qgroup subtree rescan for them. This will introduce 128 bytes overhead for each btrfs_root even qgroup is not enabled. This is to reduce memory allocations and potential failures. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 15:15:16 +08:00
#endif