linux/drivers/net/wireless/iwlwifi/iwl-ucode.c

534 lines
14 KiB
C
Raw Normal View History

/******************************************************************************
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/init.h>
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-agn-hw.h"
#include "iwl-agn.h"
#include "iwl-agn-calib.h"
#include "iwl-trans.h"
#include "iwl-fh.h"
#include "iwl-op-mode.h"
/******************************************************************************
*
* uCode download functions
*
******************************************************************************/
static inline const struct fw_img *
iwl_get_ucode_image(struct iwl_priv *priv, enum iwl_ucode_type ucode_type)
{
if (ucode_type >= IWL_UCODE_TYPE_MAX)
return NULL;
return &priv->fw->img[ucode_type];
}
/*
* Calibration
*/
static int iwl_set_Xtal_calib(struct iwl_priv *priv)
{
struct iwl_calib_xtal_freq_cmd cmd;
__le16 *xtal_calib =
(__le16 *)iwl_eeprom_query_addr(priv, EEPROM_XTAL);
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD);
cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]);
return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
}
static int iwl_set_temperature_offset_calib(struct iwl_priv *priv)
{
struct iwl_calib_temperature_offset_cmd cmd;
__le16 *offset_calib =
(__le16 *)iwl_eeprom_query_addr(priv, EEPROM_RAW_TEMPERATURE);
memset(&cmd, 0, sizeof(cmd));
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib));
if (!(cmd.radio_sensor_offset))
cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
IWL_DEBUG_CALIB(priv, "Radio sensor offset: %d\n",
le16_to_cpu(cmd.radio_sensor_offset));
return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
}
static int iwl_set_temperature_offset_calib_v2(struct iwl_priv *priv)
{
struct iwl_calib_temperature_offset_v2_cmd cmd;
__le16 *offset_calib_high = (__le16 *)iwl_eeprom_query_addr(priv,
EEPROM_KELVIN_TEMPERATURE);
__le16 *offset_calib_low =
(__le16 *)iwl_eeprom_query_addr(priv, EEPROM_RAW_TEMPERATURE);
struct iwl_eeprom_calib_hdr *hdr;
memset(&cmd, 0, sizeof(cmd));
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
EEPROM_CALIB_ALL);
memcpy(&cmd.radio_sensor_offset_high, offset_calib_high,
sizeof(*offset_calib_high));
memcpy(&cmd.radio_sensor_offset_low, offset_calib_low,
sizeof(*offset_calib_low));
if (!(cmd.radio_sensor_offset_low)) {
IWL_DEBUG_CALIB(priv, "no info in EEPROM, use default\n");
cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET;
cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET;
}
memcpy(&cmd.burntVoltageRef, &hdr->voltage,
sizeof(hdr->voltage));
IWL_DEBUG_CALIB(priv, "Radio sensor offset high: %d\n",
le16_to_cpu(cmd.radio_sensor_offset_high));
IWL_DEBUG_CALIB(priv, "Radio sensor offset low: %d\n",
le16_to_cpu(cmd.radio_sensor_offset_low));
IWL_DEBUG_CALIB(priv, "Voltage Ref: %d\n",
le16_to_cpu(cmd.burntVoltageRef));
return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
}
static int iwl_send_calib_cfg(struct iwl_priv *priv)
{
struct iwl_calib_cfg_cmd calib_cfg_cmd;
struct iwl_host_cmd cmd = {
.id = CALIBRATION_CFG_CMD,
.len = { sizeof(struct iwl_calib_cfg_cmd), },
.data = { &calib_cfg_cmd, },
};
memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL;
calib_cfg_cmd.ucd_calib_cfg.once.start = IWL_CALIB_INIT_CFG_ALL;
calib_cfg_cmd.ucd_calib_cfg.once.send_res = IWL_CALIB_INIT_CFG_ALL;
calib_cfg_cmd.ucd_calib_cfg.flags =
IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK;
return iwl_dvm_send_cmd(priv, &cmd);
}
int iwl_init_alive_start(struct iwl_priv *priv)
{
int ret;
if (cfg(priv)->bt_params &&
cfg(priv)->bt_params->advanced_bt_coexist) {
/*
* Tell uCode we are ready to perform calibration
* need to perform this before any calibration
* no need to close the envlope since we are going
* to load the runtime uCode later.
*/
ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
if (ret)
return ret;
}
ret = iwl_send_calib_cfg(priv);
if (ret)
return ret;
/**
* temperature offset calibration is only needed for runtime ucode,
* so prepare the value now.
*/
if (cfg(priv)->need_temp_offset_calib) {
if (cfg(priv)->temp_offset_v2)
return iwl_set_temperature_offset_calib_v2(priv);
else
return iwl_set_temperature_offset_calib(priv);
}
return 0;
}
static int iwl_send_wimax_coex(struct iwl_priv *priv)
{
struct iwl_wimax_coex_cmd coex_cmd;
/* coexistence is disabled */
memset(&coex_cmd, 0, sizeof(coex_cmd));
return iwl_dvm_send_cmd_pdu(priv,
COEX_PRIORITY_TABLE_CMD, CMD_SYNC,
sizeof(coex_cmd), &coex_cmd);
}
static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = {
((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_COEX_OFF << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_COEX_ON << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
0, 0, 0, 0, 0, 0, 0
};
void iwl_send_prio_tbl(struct iwl_priv *priv)
{
struct iwl_bt_coex_prio_table_cmd prio_tbl_cmd;
memcpy(prio_tbl_cmd.prio_tbl, iwl_bt_prio_tbl,
sizeof(iwl_bt_prio_tbl));
if (iwl_dvm_send_cmd_pdu(priv,
REPLY_BT_COEX_PRIO_TABLE, CMD_SYNC,
sizeof(prio_tbl_cmd), &prio_tbl_cmd))
IWL_ERR(priv, "failed to send BT prio tbl command\n");
}
int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
{
struct iwl_bt_coex_prot_env_cmd env_cmd;
int ret;
env_cmd.action = action;
env_cmd.type = type;
ret = iwl_dvm_send_cmd_pdu(priv,
REPLY_BT_COEX_PROT_ENV, CMD_SYNC,
sizeof(env_cmd), &env_cmd);
if (ret)
IWL_ERR(priv, "failed to send BT env command\n");
return ret;
}
static int iwl_alive_notify(struct iwl_priv *priv)
{
int ret;
iwl_trans_fw_alive(trans(priv));
priv->passive_no_rx = false;
priv->transport_queue_stop = 0;
ret = iwl_send_wimax_coex(priv);
if (ret)
return ret;
if (!cfg(priv)->no_xtal_calib) {
ret = iwl_set_Xtal_calib(priv);
if (ret)
return ret;
}
return iwl_send_calib_results(priv);
}
/**
* iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
* using sample data 100 bytes apart. If these sample points are good,
* it's a pretty good bet that everything between them is good, too.
*/
static int iwl_verify_sec_sparse(struct iwl_priv *priv,
const struct fw_desc *fw_desc)
{
__le32 *image = (__le32 *)fw_desc->v_addr;
u32 len = fw_desc->len;
u32 val;
u32 i;
IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len);
for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
/* read data comes through single port, auto-incr addr */
/* NOTE: Use the debugless read so we don't flood kernel log
* if IWL_DL_IO is set */
iwl_write_direct32(trans(priv), HBUS_TARG_MEM_RADDR,
i + fw_desc->offset);
val = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image))
return -EIO;
}
return 0;
}
static void iwl_print_mismatch_sec(struct iwl_priv *priv,
const struct fw_desc *fw_desc)
{
__le32 *image = (__le32 *)fw_desc->v_addr;
u32 len = fw_desc->len;
u32 val;
u32 offs;
int errors = 0;
IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len);
iwl_write_direct32(trans(priv), HBUS_TARG_MEM_RADDR,
fw_desc->offset);
for (offs = 0;
offs < len && errors < 20;
offs += sizeof(u32), image++) {
/* read data comes through single port, auto-incr addr */
val = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
IWL_ERR(priv, "uCode INST section at "
"offset 0x%x, is 0x%x, s/b 0x%x\n",
offs, val, le32_to_cpu(*image));
errors++;
}
}
}
/**
* iwl_verify_ucode - determine which instruction image is in SRAM,
* and verify its contents
*/
static int iwl_verify_ucode(struct iwl_priv *priv,
enum iwl_ucode_type ucode_type)
{
const struct fw_img *img = iwl_get_ucode_image(priv, ucode_type);
if (!img) {
IWL_ERR(priv, "Invalid ucode requested (%d)\n", ucode_type);
return -EINVAL;
}
if (!iwl_verify_sec_sparse(priv, &img->sec[IWL_UCODE_SECTION_INST])) {
IWL_DEBUG_FW(priv, "uCode is good in inst SRAM\n");
return 0;
}
IWL_ERR(priv, "UCODE IMAGE IN INSTRUCTION SRAM NOT VALID!!\n");
iwl_print_mismatch_sec(priv, &img->sec[IWL_UCODE_SECTION_INST]);
return -EIO;
}
struct iwl_alive_data {
bool valid;
u8 subtype;
};
static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait,
struct iwl_rx_packet *pkt, void *data)
{
struct iwl_priv *priv =
container_of(notif_wait, struct iwl_priv, notif_wait);
struct iwl_alive_data *alive_data = data;
struct iwl_alive_resp *palive;
palive = (void *)pkt->data;
IWL_DEBUG_FW(priv, "Alive ucode status 0x%08X revision "
"0x%01X 0x%01X\n",
palive->is_valid, palive->ver_type,
palive->ver_subtype);
priv->device_pointers.error_event_table =
le32_to_cpu(palive->error_event_table_ptr);
priv->device_pointers.log_event_table =
le32_to_cpu(palive->log_event_table_ptr);
alive_data->subtype = palive->ver_subtype;
alive_data->valid = palive->is_valid == UCODE_VALID_OK;
return true;
}
#define UCODE_ALIVE_TIMEOUT HZ
#define UCODE_CALIB_TIMEOUT (2*HZ)
int iwl_load_ucode_wait_alive(struct iwl_priv *priv,
enum iwl_ucode_type ucode_type)
{
struct iwl_notification_wait alive_wait;
struct iwl_alive_data alive_data;
const struct fw_img *fw;
int ret;
enum iwl_ucode_type old_type;
static const u8 alive_cmd[] = { REPLY_ALIVE };
old_type = priv->cur_ucode;
priv->cur_ucode = ucode_type;
fw = iwl_get_ucode_image(priv, ucode_type);
priv->ucode_loaded = false;
if (!fw)
return -EINVAL;
iwl_init_notification_wait(&priv->notif_wait, &alive_wait,
alive_cmd, ARRAY_SIZE(alive_cmd),
iwl_alive_fn, &alive_data);
ret = iwl_trans_start_fw(trans(priv), fw);
if (ret) {
priv->cur_ucode = old_type;
iwl_remove_notification(&priv->notif_wait, &alive_wait);
return ret;
}
/*
* Some things may run in the background now, but we
* just wait for the ALIVE notification here.
*/
ret = iwl_wait_notification(&priv->notif_wait, &alive_wait,
UCODE_ALIVE_TIMEOUT);
if (ret) {
priv->cur_ucode = old_type;
return ret;
}
if (!alive_data.valid) {
IWL_ERR(priv, "Loaded ucode is not valid!\n");
priv->cur_ucode = old_type;
return -EIO;
}
/*
* This step takes a long time (60-80ms!!) and
* WoWLAN image should be loaded quickly, so
* skip it for WoWLAN.
*/
if (ucode_type != IWL_UCODE_WOWLAN) {
ret = iwl_verify_ucode(priv, ucode_type);
if (ret) {
priv->cur_ucode = old_type;
return ret;
}
/* delay a bit to give rfkill time to run */
msleep(5);
}
ret = iwl_alive_notify(priv);
if (ret) {
IWL_WARN(priv,
"Could not complete ALIVE transition: %d\n", ret);
priv->cur_ucode = old_type;
return ret;
}
priv->ucode_loaded = true;
return 0;
}
static bool iwlagn_wait_calib(struct iwl_notif_wait_data *notif_wait,
struct iwl_rx_packet *pkt, void *data)
{
struct iwl_priv *priv = data;
struct iwl_calib_hdr *hdr;
int len;
if (pkt->hdr.cmd != CALIBRATION_RES_NOTIFICATION) {
WARN_ON(pkt->hdr.cmd != CALIBRATION_COMPLETE_NOTIFICATION);
return true;
}
hdr = (struct iwl_calib_hdr *)pkt->data;
len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
/* reduce the size by the length field itself */
len -= sizeof(__le32);
if (iwl_calib_set(priv, hdr, len))
IWL_ERR(priv, "Failed to record calibration data %d\n",
hdr->op_code);
return false;
}
int iwl_run_init_ucode(struct iwl_priv *priv)
{
struct iwl_notification_wait calib_wait;
static const u8 calib_complete[] = {
CALIBRATION_RES_NOTIFICATION,
CALIBRATION_COMPLETE_NOTIFICATION
};
int ret;
lockdep_assert_held(&priv->mutex);
/* No init ucode required? Curious, but maybe ok */
if (!priv->fw->img[IWL_UCODE_INIT].sec[0].len)
return 0;
if (priv->init_ucode_run)
return 0;
iwl_init_notification_wait(&priv->notif_wait, &calib_wait,
calib_complete, ARRAY_SIZE(calib_complete),
iwlagn_wait_calib, priv);
/* Will also start the device */
ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_INIT);
if (ret)
goto error;
ret = iwl_init_alive_start(priv);
if (ret)
goto error;
/*
* Some things may run in the background now, but we
* just wait for the calibration complete notification.
*/
ret = iwl_wait_notification(&priv->notif_wait, &calib_wait,
UCODE_CALIB_TIMEOUT);
if (!ret)
priv->init_ucode_run = true;
goto out;
error:
iwl_remove_notification(&priv->notif_wait, &calib_wait);
out:
/* Whatever happened, stop the device */
iwl_trans_stop_device(trans(priv));
priv->ucode_loaded = false;
return ret;
}