linux/kernel/time/clocksource.c

511 lines
13 KiB
C
Raw Normal View History

/*
* linux/kernel/time/clocksource.c
*
* This file contains the functions which manage clocksource drivers.
*
* Copyright (C) 2004, 2005 IBM, John Stultz (johnstul@us.ibm.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* TODO WishList:
* o Allow clocksource drivers to be unregistered
* o get rid of clocksource_jiffies extern
*/
#include <linux/clocksource.h>
#include <linux/sysdev.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h> /* for spin_unlock_irq() using preempt_count() m68k */
#include <linux/tick.h>
/* XXX - Would like a better way for initializing curr_clocksource */
extern struct clocksource clocksource_jiffies;
/*[Clocksource internal variables]---------
* curr_clocksource:
* currently selected clocksource. Initialized to clocksource_jiffies.
* next_clocksource:
* pending next selected clocksource.
* clocksource_list:
* linked list with the registered clocksources
* clocksource_lock:
* protects manipulations to curr_clocksource and next_clocksource
* and the clocksource_list
* override_name:
* Name of the user-specified clocksource.
*/
static struct clocksource *curr_clocksource = &clocksource_jiffies;
static struct clocksource *next_clocksource;
static struct clocksource *clocksource_override;
static LIST_HEAD(clocksource_list);
static DEFINE_SPINLOCK(clocksource_lock);
static char override_name[32];
static int finished_booting;
[PATCH] clocksource init adjustments (fix bug #7426) This patch resolves the issue found here: http://bugme.osdl.org/show_bug.cgi?id=7426 The basic summary is: Currently we register most of i386/x86_64 clocksources at module_init time. Then we enable clocksource selection at late_initcall time. This causes some problems for drivers that use gettimeofday for init calibration routines (specifically the es1968 driver in this case), where durring module_init, the only clocksource available is the low-res jiffies clocksource. This may cause slight calibration errors, due to the small sampling time used. It should be noted that drivers that require fine grained time may not function on architectures that do not have better then jiffies resolution timekeeping (there are a few). However, this does not discount the reasonable need for such fine-grained timekeeping at init time. Thus the solution here is to register clocksources earlier (ideally when the hardware is being initialized), and then we enable clocksource selection at fs_initcall (before device_initcall). This patch should probably get some testing time in -mm, since clocksource selection is one of the most important issues for correct timekeeping, and I've only been able to test this on a few of my own boxes. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 16:30:50 +08:00
/* clocksource_done_booting - Called near the end of core bootup
*
[PATCH] clocksource init adjustments (fix bug #7426) This patch resolves the issue found here: http://bugme.osdl.org/show_bug.cgi?id=7426 The basic summary is: Currently we register most of i386/x86_64 clocksources at module_init time. Then we enable clocksource selection at late_initcall time. This causes some problems for drivers that use gettimeofday for init calibration routines (specifically the es1968 driver in this case), where durring module_init, the only clocksource available is the low-res jiffies clocksource. This may cause slight calibration errors, due to the small sampling time used. It should be noted that drivers that require fine grained time may not function on architectures that do not have better then jiffies resolution timekeeping (there are a few). However, this does not discount the reasonable need for such fine-grained timekeeping at init time. Thus the solution here is to register clocksources earlier (ideally when the hardware is being initialized), and then we enable clocksource selection at fs_initcall (before device_initcall). This patch should probably get some testing time in -mm, since clocksource selection is one of the most important issues for correct timekeeping, and I've only been able to test this on a few of my own boxes. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 16:30:50 +08:00
* Hack to avoid lots of clocksource churn at boot time.
* We use fs_initcall because we want this to start before
* device_initcall but after subsys_initcall.
*/
static int __init clocksource_done_booting(void)
{
finished_booting = 1;
return 0;
}
[PATCH] clocksource init adjustments (fix bug #7426) This patch resolves the issue found here: http://bugme.osdl.org/show_bug.cgi?id=7426 The basic summary is: Currently we register most of i386/x86_64 clocksources at module_init time. Then we enable clocksource selection at late_initcall time. This causes some problems for drivers that use gettimeofday for init calibration routines (specifically the es1968 driver in this case), where durring module_init, the only clocksource available is the low-res jiffies clocksource. This may cause slight calibration errors, due to the small sampling time used. It should be noted that drivers that require fine grained time may not function on architectures that do not have better then jiffies resolution timekeeping (there are a few). However, this does not discount the reasonable need for such fine-grained timekeeping at init time. Thus the solution here is to register clocksources earlier (ideally when the hardware is being initialized), and then we enable clocksource selection at fs_initcall (before device_initcall). This patch should probably get some testing time in -mm, since clocksource selection is one of the most important issues for correct timekeeping, and I've only been able to test this on a few of my own boxes. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 16:30:50 +08:00
fs_initcall(clocksource_done_booting);
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
static LIST_HEAD(watchdog_list);
static struct clocksource *watchdog;
static struct timer_list watchdog_timer;
static DEFINE_SPINLOCK(watchdog_lock);
static cycle_t watchdog_last;
static unsigned long watchdog_resumed;
/*
* Interval: 0.5sec Threshold: 0.0625s
*/
#define WATCHDOG_INTERVAL (HZ >> 1)
#define WATCHDOG_THRESHOLD (NSEC_PER_SEC >> 4)
static void clocksource_ratewd(struct clocksource *cs, int64_t delta)
{
if (delta > -WATCHDOG_THRESHOLD && delta < WATCHDOG_THRESHOLD)
return;
printk(KERN_WARNING "Clocksource %s unstable (delta = %Ld ns)\n",
cs->name, delta);
cs->flags &= ~(CLOCK_SOURCE_VALID_FOR_HRES | CLOCK_SOURCE_WATCHDOG);
clocksource_change_rating(cs, 0);
cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
list_del(&cs->wd_list);
}
static void clocksource_watchdog(unsigned long data)
{
struct clocksource *cs, *tmp;
cycle_t csnow, wdnow;
int64_t wd_nsec, cs_nsec;
int resumed;
spin_lock(&watchdog_lock);
resumed = test_and_clear_bit(0, &watchdog_resumed);
wdnow = watchdog->read();
wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask);
watchdog_last = wdnow;
list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) {
csnow = cs->read();
if (unlikely(resumed)) {
cs->wd_last = csnow;
continue;
}
/* Initialized ? */
if (!(cs->flags & CLOCK_SOURCE_WATCHDOG)) {
if ((cs->flags & CLOCK_SOURCE_IS_CONTINUOUS) &&
(watchdog->flags & CLOCK_SOURCE_IS_CONTINUOUS)) {
cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
/*
* We just marked the clocksource as
* highres-capable, notify the rest of the
* system as well so that we transition
* into high-res mode:
*/
tick_clock_notify();
}
cs->flags |= CLOCK_SOURCE_WATCHDOG;
cs->wd_last = csnow;
} else {
cs_nsec = cyc2ns(cs, (csnow - cs->wd_last) & cs->mask);
cs->wd_last = csnow;
/* Check the delta. Might remove from the list ! */
clocksource_ratewd(cs, cs_nsec - wd_nsec);
}
}
if (!list_empty(&watchdog_list)) {
__mod_timer(&watchdog_timer,
watchdog_timer.expires + WATCHDOG_INTERVAL);
}
spin_unlock(&watchdog_lock);
}
static void clocksource_resume_watchdog(void)
{
set_bit(0, &watchdog_resumed);
}
static void clocksource_check_watchdog(struct clocksource *cs)
{
struct clocksource *cse;
unsigned long flags;
spin_lock_irqsave(&watchdog_lock, flags);
if (cs->flags & CLOCK_SOURCE_MUST_VERIFY) {
int started = !list_empty(&watchdog_list);
list_add(&cs->wd_list, &watchdog_list);
if (!started && watchdog) {
watchdog_last = watchdog->read();
watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
add_timer(&watchdog_timer);
}
} else {
if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
if (!watchdog || cs->rating > watchdog->rating) {
if (watchdog)
del_timer(&watchdog_timer);
watchdog = cs;
init_timer(&watchdog_timer);
watchdog_timer.function = clocksource_watchdog;
/* Reset watchdog cycles */
list_for_each_entry(cse, &watchdog_list, wd_list)
cse->flags &= ~CLOCK_SOURCE_WATCHDOG;
/* Start if list is not empty */
if (!list_empty(&watchdog_list)) {
watchdog_last = watchdog->read();
watchdog_timer.expires =
jiffies + WATCHDOG_INTERVAL;
add_timer(&watchdog_timer);
}
}
}
spin_unlock_irqrestore(&watchdog_lock, flags);
}
#else
static void clocksource_check_watchdog(struct clocksource *cs)
{
if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
}
static inline void clocksource_resume_watchdog(void) { }
#endif
/**
* clocksource_resume - resume the clocksource(s)
*/
void clocksource_resume(void)
{
struct clocksource *cs;
unsigned long flags;
spin_lock_irqsave(&clocksource_lock, flags);
list_for_each_entry(cs, &clocksource_list, list) {
if (cs->resume)
cs->resume();
}
clocksource_resume_watchdog();
spin_unlock_irqrestore(&clocksource_lock, flags);
}
/**
* clocksource_get_next - Returns the selected clocksource
*
*/
struct clocksource *clocksource_get_next(void)
{
unsigned long flags;
spin_lock_irqsave(&clocksource_lock, flags);
if (next_clocksource && finished_booting) {
curr_clocksource = next_clocksource;
next_clocksource = NULL;
}
spin_unlock_irqrestore(&clocksource_lock, flags);
return curr_clocksource;
}
/**
* select_clocksource - Selects the best registered clocksource.
*
* Private function. Must hold clocksource_lock when called.
*
* Select the clocksource with the best rating, or the clocksource,
* which is selected by userspace override.
*/
static struct clocksource *select_clocksource(void)
{
struct clocksource *next;
if (list_empty(&clocksource_list))
return NULL;
if (clocksource_override)
next = clocksource_override;
else
next = list_entry(clocksource_list.next, struct clocksource,
list);
if (next == curr_clocksource)
return NULL;
return next;
}
/*
* Enqueue the clocksource sorted by rating
*/
static int clocksource_enqueue(struct clocksource *c)
{
struct list_head *tmp, *entry = &clocksource_list;
list_for_each(tmp, &clocksource_list) {
struct clocksource *cs;
cs = list_entry(tmp, struct clocksource, list);
if (cs == c)
return -EBUSY;
/* Keep track of the place, where to insert */
if (cs->rating >= c->rating)
entry = tmp;
}
list_add(&c->list, entry);
if (strlen(c->name) == strlen(override_name) &&
!strcmp(c->name, override_name))
clocksource_override = c;
return 0;
}
/**
* clocksource_register - Used to install new clocksources
* @t: clocksource to be registered
*
* Returns -EBUSY if registration fails, zero otherwise.
*/
int clocksource_register(struct clocksource *c)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&clocksource_lock, flags);
ret = clocksource_enqueue(c);
if (!ret)
next_clocksource = select_clocksource();
spin_unlock_irqrestore(&clocksource_lock, flags);
if (!ret)
clocksource_check_watchdog(c);
return ret;
}
EXPORT_SYMBOL(clocksource_register);
/**
* clocksource_change_rating - Change the rating of a registered clocksource
*
*/
void clocksource_change_rating(struct clocksource *cs, int rating)
{
unsigned long flags;
spin_lock_irqsave(&clocksource_lock, flags);
list_del(&cs->list);
cs->rating = rating;
clocksource_enqueue(cs);
next_clocksource = select_clocksource();
spin_unlock_irqrestore(&clocksource_lock, flags);
}
#ifdef CONFIG_SYSFS
/**
* sysfs_show_current_clocksources - sysfs interface for current clocksource
* @dev: unused
* @buf: char buffer to be filled with clocksource list
*
* Provides sysfs interface for listing current clocksource.
*/
static ssize_t
sysfs_show_current_clocksources(struct sys_device *dev, char *buf)
{
char *curr = buf;
spin_lock_irq(&clocksource_lock);
curr += sprintf(curr, "%s ", curr_clocksource->name);
spin_unlock_irq(&clocksource_lock);
curr += sprintf(curr, "\n");
return curr - buf;
}
/**
* sysfs_override_clocksource - interface for manually overriding clocksource
* @dev: unused
* @buf: name of override clocksource
* @count: length of buffer
*
* Takes input from sysfs interface for manually overriding the default
* clocksource selction.
*/
static ssize_t sysfs_override_clocksource(struct sys_device *dev,
const char *buf, size_t count)
{
struct clocksource *ovr = NULL;
size_t ret = count;
int len;
/* strings from sysfs write are not 0 terminated! */
if (count >= sizeof(override_name))
return -EINVAL;
/* strip of \n: */
if (buf[count-1] == '\n')
count--;
spin_lock_irq(&clocksource_lock);
if (count > 0)
memcpy(override_name, buf, count);
override_name[count] = 0;
len = strlen(override_name);
if (len) {
struct clocksource *cs;
ovr = clocksource_override;
/* try to select it: */
list_for_each_entry(cs, &clocksource_list, list) {
if (strlen(cs->name) == len &&
!strcmp(cs->name, override_name))
ovr = cs;
}
}
/* Reselect, when the override name has changed */
if (ovr != clocksource_override) {
clocksource_override = ovr;
next_clocksource = select_clocksource();
}
spin_unlock_irq(&clocksource_lock);
return ret;
}
/**
* sysfs_show_available_clocksources - sysfs interface for listing clocksource
* @dev: unused
* @buf: char buffer to be filled with clocksource list
*
* Provides sysfs interface for listing registered clocksources
*/
static ssize_t
sysfs_show_available_clocksources(struct sys_device *dev, char *buf)
{
struct clocksource *src;
char *curr = buf;
spin_lock_irq(&clocksource_lock);
list_for_each_entry(src, &clocksource_list, list) {
curr += sprintf(curr, "%s ", src->name);
}
spin_unlock_irq(&clocksource_lock);
curr += sprintf(curr, "\n");
return curr - buf;
}
/*
* Sysfs setup bits:
*/
static SYSDEV_ATTR(current_clocksource, 0600, sysfs_show_current_clocksources,
sysfs_override_clocksource);
static SYSDEV_ATTR(available_clocksource, 0600,
sysfs_show_available_clocksources, NULL);
static struct sysdev_class clocksource_sysclass = {
set_kset_name("clocksource"),
};
static struct sys_device device_clocksource = {
.id = 0,
.cls = &clocksource_sysclass,
};
static int __init init_clocksource_sysfs(void)
{
int error = sysdev_class_register(&clocksource_sysclass);
if (!error)
error = sysdev_register(&device_clocksource);
if (!error)
error = sysdev_create_file(
&device_clocksource,
&attr_current_clocksource);
if (!error)
error = sysdev_create_file(
&device_clocksource,
&attr_available_clocksource);
return error;
}
device_initcall(init_clocksource_sysfs);
#endif /* CONFIG_SYSFS */
/**
* boot_override_clocksource - boot clock override
* @str: override name
*
* Takes a clocksource= boot argument and uses it
* as the clocksource override name.
*/
static int __init boot_override_clocksource(char* str)
{
unsigned long flags;
spin_lock_irqsave(&clocksource_lock, flags);
if (str)
strlcpy(override_name, str, sizeof(override_name));
spin_unlock_irqrestore(&clocksource_lock, flags);
return 1;
}
__setup("clocksource=", boot_override_clocksource);
/**
* boot_override_clock - Compatibility layer for deprecated boot option
* @str: override name
*
* DEPRECATED! Takes a clock= boot argument and uses it
* as the clocksource override name
*/
static int __init boot_override_clock(char* str)
{
if (!strcmp(str, "pmtmr")) {
printk("Warning: clock=pmtmr is deprecated. "
"Use clocksource=acpi_pm.\n");
return boot_override_clocksource("acpi_pm");
}
printk("Warning! clock= boot option is deprecated. "
"Use clocksource=xyz\n");
return boot_override_clocksource(str);
}
__setup("clock=", boot_override_clock);