linux/drivers/net/ethernet/intel/ice/ice_lib.c

// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2018, Intel Corporation. */

#include "ice.h"
#include "ice_lib.h"

/**
 * ice_setup_rx_ctx - Configure a receive ring context
 * @ring: The Rx ring to configure
 *
 * Configure the Rx descriptor ring in RLAN context.
 */
static int ice_setup_rx_ctx(struct ice_ring *ring)
{
	struct ice_vsi *vsi = ring->vsi;
	struct ice_hw *hw = &vsi->back->hw;
	u32 rxdid = ICE_RXDID_FLEX_NIC;
	struct ice_rlan_ctx rlan_ctx;
	u32 regval;
	u16 pf_q;
	int err;

	/* what is RX queue number in global space of 2K Rx queues */
	pf_q = vsi->rxq_map[ring->q_index];

	/* clear the context structure first */
	memset(&rlan_ctx, 0, sizeof(rlan_ctx));

	rlan_ctx.base = ring->dma >> 7;

	rlan_ctx.qlen = ring->count;

	/* Receive Packet Data Buffer Size.
	 * The Packet Data Buffer Size is defined in 128 byte units.
	 */
	rlan_ctx.dbuf = vsi->rx_buf_len >> ICE_RLAN_CTX_DBUF_S;

	/* use 32 byte descriptors */
	rlan_ctx.dsize = 1;

	/* Strip the Ethernet CRC bytes before the packet is posted to host
	 * memory.
	 */
	rlan_ctx.crcstrip = 1;

	/* L2TSEL flag defines the reported L2 Tags in the receive descriptor */
	rlan_ctx.l2tsel = 1;

	rlan_ctx.dtype = ICE_RX_DTYPE_NO_SPLIT;
	rlan_ctx.hsplit_0 = ICE_RLAN_RX_HSPLIT_0_NO_SPLIT;
	rlan_ctx.hsplit_1 = ICE_RLAN_RX_HSPLIT_1_NO_SPLIT;

	/* This controls whether VLAN is stripped from inner headers
	 * The VLAN in the inner L2 header is stripped to the receive
	 * descriptor if enabled by this flag.
	 */
	rlan_ctx.showiv = 0;

	/* Max packet size for this queue - must not be set to a larger value
	 * than 5 x DBUF
	 */
	rlan_ctx.rxmax = min_t(u16, vsi->max_frame,
			       ICE_MAX_CHAINED_RX_BUFS * vsi->rx_buf_len);

	/* Rx queue threshold in units of 64 */
	rlan_ctx.lrxqthresh = 1;

	 /* Enable Flexible Descriptors in the queue context which
	  * allows this driver to select a specific receive descriptor format
	  */
	regval = rd32(hw, QRXFLXP_CNTXT(pf_q));
	regval |= (rxdid << QRXFLXP_CNTXT_RXDID_IDX_S) &
		QRXFLXP_CNTXT_RXDID_IDX_M;

	/* increasing context priority to pick up profile id;
	 * default is 0x01; setting to 0x03 to ensure profile
	 * is programming if prev context is of same priority
	 */
	regval |= (0x03 << QRXFLXP_CNTXT_RXDID_PRIO_S) &
		QRXFLXP_CNTXT_RXDID_PRIO_M;

	wr32(hw, QRXFLXP_CNTXT(pf_q), regval);

	/* Absolute queue number out of 2K needs to be passed */
	err = ice_write_rxq_ctx(hw, &rlan_ctx, pf_q);
	if (err) {
		dev_err(&vsi->back->pdev->dev,
			"Failed to set LAN Rx queue context for absolute Rx queue %d error: %d\n",
			pf_q, err);
		return -EIO;
	}

	/* init queue specific tail register */
	ring->tail = hw->hw_addr + QRX_TAIL(pf_q);
	writel(0, ring->tail);
	ice_alloc_rx_bufs(ring, ICE_DESC_UNUSED(ring));

	return 0;
}

/**
 * ice_setup_tx_ctx - setup a struct ice_tlan_ctx instance
 * @ring: The Tx ring to configure
 * @tlan_ctx: Pointer to the Tx LAN queue context structure to be initialized
 * @pf_q: queue index in the PF space
 *
 * Configure the Tx descriptor ring in TLAN context.
 */
static void
ice_setup_tx_ctx(struct ice_ring *ring, struct ice_tlan_ctx *tlan_ctx, u16 pf_q)
{
	struct ice_vsi *vsi = ring->vsi;
	struct ice_hw *hw = &vsi->back->hw;

	tlan_ctx->base = ring->dma >> ICE_TLAN_CTX_BASE_S;

	tlan_ctx->port_num = vsi->port_info->lport;

	/* Transmit Queue Length */
	tlan_ctx->qlen = ring->count;

	/* PF number */
	tlan_ctx->pf_num = hw->pf_id;

	/* queue belongs to a specific VSI type
	 * VF / VM index should be programmed per vmvf_type setting:
	 * for vmvf_type = VF, it is VF number between 0-256
	 * for vmvf_type = VM, it is VM number between 0-767
	 * for PF or EMP this field should be set to zero
	 */
	switch (vsi->type) {
	case ICE_VSI_PF:
		tlan_ctx->vmvf_type = ICE_TLAN_CTX_VMVF_TYPE_PF;
		break;
	default:
		return;
	}

	/* make sure the context is associated with the right VSI */
	tlan_ctx->src_vsi = vsi->vsi_num;

	tlan_ctx->tso_ena = ICE_TX_LEGACY;
	tlan_ctx->tso_qnum = pf_q;

	/* Legacy or Advanced Host Interface:
	 * 0: Advanced Host Interface
	 * 1: Legacy Host Interface
	 */
	tlan_ctx->legacy_int = ICE_TX_LEGACY;
}

/**
 * ice_pf_rxq_wait - Wait for a PF's Rx queue to be enabled or disabled
 * @pf: the PF being configured
 * @pf_q: the PF queue
 * @ena: enable or disable state of the queue
 *
 * This routine will wait for the given Rx queue of the PF to reach the
 * enabled or disabled state.
 * Returns -ETIMEDOUT in case of failing to reach the requested state after
 * multiple retries; else will return 0 in case of success.
 */
static int ice_pf_rxq_wait(struct ice_pf *pf, int pf_q, bool ena)
{
	int i;

	for (i = 0; i < ICE_Q_WAIT_RETRY_LIMIT; i++) {
		u32 rx_reg = rd32(&pf->hw, QRX_CTRL(pf_q));

		if (ena == !!(rx_reg & QRX_CTRL_QENA_STAT_M))
			break;

		usleep_range(10, 20);
	}
	if (i >= ICE_Q_WAIT_RETRY_LIMIT)
		return -ETIMEDOUT;

	return 0;
}

/**
 * ice_vsi_ctrl_rx_rings - Start or stop a VSI's Rx rings
 * @vsi: the VSI being configured
 * @ena: start or stop the Rx rings
 */
static int ice_vsi_ctrl_rx_rings(struct ice_vsi *vsi, bool ena)
{
	struct ice_pf *pf = vsi->back;
	struct ice_hw *hw = &pf->hw;
	int i, j, ret = 0;

	for (i = 0; i < vsi->num_rxq; i++) {
		int pf_q = vsi->rxq_map[i];
		u32 rx_reg;

		for (j = 0; j < ICE_Q_WAIT_MAX_RETRY; j++) {
			rx_reg = rd32(hw, QRX_CTRL(pf_q));
			if (((rx_reg >> QRX_CTRL_QENA_REQ_S) & 1) ==
			    ((rx_reg >> QRX_CTRL_QENA_STAT_S) & 1))
				break;
			usleep_range(1000, 2000);
		}

		/* Skip if the queue is already in the requested state */
		if (ena == !!(rx_reg & QRX_CTRL_QENA_STAT_M))
			continue;

		/* turn on/off the queue */
		if (ena)
			rx_reg |= QRX_CTRL_QENA_REQ_M;
		else
			rx_reg &= ~QRX_CTRL_QENA_REQ_M;
		wr32(hw, QRX_CTRL(pf_q), rx_reg);

		/* wait for the change to finish */
		ret = ice_pf_rxq_wait(pf, pf_q, ena);
		if (ret) {
			dev_err(&pf->pdev->dev,
				"VSI idx %d Rx ring %d %sable timeout\n",
				vsi->idx, pf_q, (ena ? "en" : "dis"));
			break;
		}
	}

	return ret;
}

/**
 * ice_add_mac_to_list - Add a mac address filter entry to the list
 * @vsi: the VSI to be forwarded to
 * @add_list: pointer to the list which contains MAC filter entries
 * @macaddr: the MAC address to be added.
 *
 * Adds mac address filter entry to the temp list
 *
 * Returns 0 on success or ENOMEM on failure.
 */
int ice_add_mac_to_list(struct ice_vsi *vsi, struct list_head *add_list,
			const u8 *macaddr)
{
	struct ice_fltr_list_entry *tmp;
	struct ice_pf *pf = vsi->back;

	tmp = devm_kzalloc(&pf->pdev->dev, sizeof(*tmp), GFP_ATOMIC);
	if (!tmp)
		return -ENOMEM;

	tmp->fltr_info.flag = ICE_FLTR_TX;
	tmp->fltr_info.src = vsi->vsi_num;
	tmp->fltr_info.lkup_type = ICE_SW_LKUP_MAC;
	tmp->fltr_info.fltr_act = ICE_FWD_TO_VSI;
	tmp->fltr_info.fwd_id.vsi_id = vsi->vsi_num;
	ether_addr_copy(tmp->fltr_info.l_data.mac.mac_addr, macaddr);

	INIT_LIST_HEAD(&tmp->list_entry);
	list_add(&tmp->list_entry, add_list);

	return 0;
}

/**
 * ice_update_eth_stats - Update VSI-specific ethernet statistics counters
 * @vsi: the VSI to be updated
 */
void ice_update_eth_stats(struct ice_vsi *vsi)
{
	struct ice_eth_stats *prev_es, *cur_es;
	struct ice_hw *hw = &vsi->back->hw;
	u16 vsi_num = vsi->vsi_num;    /* HW absolute index of a VSI */

	prev_es = &vsi->eth_stats_prev;
	cur_es = &vsi->eth_stats;

	ice_stat_update40(hw, GLV_GORCH(vsi_num), GLV_GORCL(vsi_num),
			  vsi->stat_offsets_loaded, &prev_es->rx_bytes,
			  &cur_es->rx_bytes);

	ice_stat_update40(hw, GLV_UPRCH(vsi_num), GLV_UPRCL(vsi_num),
			  vsi->stat_offsets_loaded, &prev_es->rx_unicast,
			  &cur_es->rx_unicast);

	ice_stat_update40(hw, GLV_MPRCH(vsi_num), GLV_MPRCL(vsi_num),
			  vsi->stat_offsets_loaded, &prev_es->rx_multicast,
			  &cur_es->rx_multicast);

	ice_stat_update40(hw, GLV_BPRCH(vsi_num), GLV_BPRCL(vsi_num),
			  vsi->stat_offsets_loaded, &prev_es->rx_broadcast,
			  &cur_es->rx_broadcast);

	ice_stat_update32(hw, GLV_RDPC(vsi_num), vsi->stat_offsets_loaded,
			  &prev_es->rx_discards, &cur_es->rx_discards);

	ice_stat_update40(hw, GLV_GOTCH(vsi_num), GLV_GOTCL(vsi_num),
			  vsi->stat_offsets_loaded, &prev_es->tx_bytes,
			  &cur_es->tx_bytes);

	ice_stat_update40(hw, GLV_UPTCH(vsi_num), GLV_UPTCL(vsi_num),
			  vsi->stat_offsets_loaded, &prev_es->tx_unicast,
			  &cur_es->tx_unicast);

	ice_stat_update40(hw, GLV_MPTCH(vsi_num), GLV_MPTCL(vsi_num),
			  vsi->stat_offsets_loaded, &prev_es->tx_multicast,
			  &cur_es->tx_multicast);

	ice_stat_update40(hw, GLV_BPTCH(vsi_num), GLV_BPTCL(vsi_num),
			  vsi->stat_offsets_loaded, &prev_es->tx_broadcast,
			  &cur_es->tx_broadcast);

	ice_stat_update32(hw, GLV_TEPC(vsi_num), vsi->stat_offsets_loaded,
			  &prev_es->tx_errors, &cur_es->tx_errors);

	vsi->stat_offsets_loaded = true;
}

/**
 * ice_free_fltr_list - free filter lists helper
 * @dev: pointer to the device struct
 * @h: pointer to the list head to be freed
 *
 * Helper function to free filter lists previously created using
 * ice_add_mac_to_list
 */
void ice_free_fltr_list(struct device *dev, struct list_head *h)
{
	struct ice_fltr_list_entry *e, *tmp;

	list_for_each_entry_safe(e, tmp, h, list_entry) {
		list_del(&e->list_entry);
		devm_kfree(dev, e);
	}
}

/**
 * ice_vsi_add_vlan - Add VSI membership for given VLAN
 * @vsi: the VSI being configured
 * @vid: VLAN id to be added
 */
int ice_vsi_add_vlan(struct ice_vsi *vsi, u16 vid)
{
	struct ice_fltr_list_entry *tmp;
	struct ice_pf *pf = vsi->back;
	LIST_HEAD(tmp_add_list);
	enum ice_status status;
	int err = 0;

	tmp = devm_kzalloc(&pf->pdev->dev, sizeof(*tmp), GFP_KERNEL);
	if (!tmp)
		return -ENOMEM;

	tmp->fltr_info.lkup_type = ICE_SW_LKUP_VLAN;
	tmp->fltr_info.fltr_act = ICE_FWD_TO_VSI;
	tmp->fltr_info.flag = ICE_FLTR_TX;
	tmp->fltr_info.src = vsi->vsi_num;
	tmp->fltr_info.fwd_id.vsi_id = vsi->vsi_num;
	tmp->fltr_info.l_data.vlan.vlan_id = vid;

	INIT_LIST_HEAD(&tmp->list_entry);
	list_add(&tmp->list_entry, &tmp_add_list);

	status = ice_add_vlan(&pf->hw, &tmp_add_list);
	if (status) {
		err = -ENODEV;
		dev_err(&pf->pdev->dev, "Failure Adding VLAN %d on VSI %i\n",
			vid, vsi->vsi_num);
	}

	ice_free_fltr_list(&pf->pdev->dev, &tmp_add_list);
	return err;
}

/**
 * ice_vsi_kill_vlan - Remove VSI membership for a given VLAN
 * @vsi: the VSI being configured
 * @vid: VLAN id to be removed
 *
 * Returns 0 on success and negative on failure
 */
int ice_vsi_kill_vlan(struct ice_vsi *vsi, u16 vid)
{
	struct ice_fltr_list_entry *list;
	struct ice_pf *pf = vsi->back;
	LIST_HEAD(tmp_add_list);
	int status = 0;

	list = devm_kzalloc(&pf->pdev->dev, sizeof(*list), GFP_KERNEL);
	if (!list)
		return -ENOMEM;

	list->fltr_info.lkup_type = ICE_SW_LKUP_VLAN;
	list->fltr_info.fwd_id.vsi_id = vsi->vsi_num;
	list->fltr_info.fltr_act = ICE_FWD_TO_VSI;
	list->fltr_info.l_data.vlan.vlan_id = vid;
	list->fltr_info.flag = ICE_FLTR_TX;
	list->fltr_info.src = vsi->vsi_num;

	INIT_LIST_HEAD(&list->list_entry);
	list_add(&list->list_entry, &tmp_add_list);

	if (ice_remove_vlan(&pf->hw, &tmp_add_list)) {
		dev_err(&pf->pdev->dev, "Error removing VLAN %d on vsi %i\n",
			vid, vsi->vsi_num);
		status = -EIO;
	}

	ice_free_fltr_list(&pf->pdev->dev, &tmp_add_list);
	return status;
}

/**
 * ice_vsi_cfg_rxqs - Configure the VSI for Rx
 * @vsi: the VSI being configured
 *
 * Return 0 on success and a negative value on error
 * Configure the Rx VSI for operation.
 */
int ice_vsi_cfg_rxqs(struct ice_vsi *vsi)
{
	int err = 0;
	u16 i;

	if (vsi->netdev && vsi->netdev->mtu > ETH_DATA_LEN)
		vsi->max_frame = vsi->netdev->mtu +
			ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
	else
		vsi->max_frame = ICE_RXBUF_2048;

	vsi->rx_buf_len = ICE_RXBUF_2048;
	/* set up individual rings */
	for (i = 0; i < vsi->num_rxq && !err; i++)
		err = ice_setup_rx_ctx(vsi->rx_rings[i]);

	if (err) {
		dev_err(&vsi->back->pdev->dev, "ice_setup_rx_ctx failed\n");
		return -EIO;
	}
	return err;
}

/**
 * ice_vsi_cfg_txqs - Configure the VSI for Tx
 * @vsi: the VSI being configured
 *
 * Return 0 on success and a negative value on error
 * Configure the Tx VSI for operation.
 */
int ice_vsi_cfg_txqs(struct ice_vsi *vsi)
{
	struct ice_aqc_add_tx_qgrp *qg_buf;
	struct ice_aqc_add_txqs_perq *txq;
	struct ice_pf *pf = vsi->back;
	enum ice_status status;
	u16 buf_len, i, pf_q;
	int err = 0, tc = 0;
	u8 num_q_grps;

	buf_len = sizeof(struct ice_aqc_add_tx_qgrp);
	qg_buf = devm_kzalloc(&pf->pdev->dev, buf_len, GFP_KERNEL);
	if (!qg_buf)
		return -ENOMEM;

	if (vsi->num_txq > ICE_MAX_TXQ_PER_TXQG) {
		err = -EINVAL;
		goto err_cfg_txqs;
	}
	qg_buf->num_txqs = 1;
	num_q_grps = 1;

	/* set up and configure the Tx queues */
	ice_for_each_txq(vsi, i) {
		struct ice_tlan_ctx tlan_ctx = { 0 };

		pf_q = vsi->txq_map[i];
		ice_setup_tx_ctx(vsi->tx_rings[i], &tlan_ctx, pf_q);
		/* copy context contents into the qg_buf */
		qg_buf->txqs[0].txq_id = cpu_to_le16(pf_q);
		ice_set_ctx((u8 *)&tlan_ctx, qg_buf->txqs[0].txq_ctx,
			    ice_tlan_ctx_info);

		/* init queue specific tail reg. It is referred as transmit
		 * comm scheduler queue doorbell.
		 */
		vsi->tx_rings[i]->tail = pf->hw.hw_addr + QTX_COMM_DBELL(pf_q);
		status = ice_ena_vsi_txq(vsi->port_info, vsi->vsi_num, tc,
					 num_q_grps, qg_buf, buf_len, NULL);
		if (status) {
			dev_err(&vsi->back->pdev->dev,
				"Failed to set LAN Tx queue context, error: %d\n",
				status);
			err = -ENODEV;
			goto err_cfg_txqs;
		}

		/* Add Tx Queue TEID into the VSI Tx ring from the response
		 * This will complete configuring and enabling the queue.
		 */
		txq = &qg_buf->txqs[0];
		if (pf_q == le16_to_cpu(txq->txq_id))
			vsi->tx_rings[i]->txq_teid =
				le32_to_cpu(txq->q_teid);
	}
err_cfg_txqs:
	devm_kfree(&pf->pdev->dev, qg_buf);
	return err;
}

/**
 * ice_vsi_cfg_msix - MSIX mode Interrupt Config in the HW
 * @vsi: the VSI being configured
 */
void ice_vsi_cfg_msix(struct ice_vsi *vsi)
{
	struct ice_pf *pf = vsi->back;
	u16 vector = vsi->base_vector;
	struct ice_hw *hw = &pf->hw;
	u32 txq = 0, rxq = 0;
	int i, q, itr;
	u8 itr_gran;

	for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
		struct ice_q_vector *q_vector = vsi->q_vectors[i];

		itr_gran = hw->itr_gran_200;

		if (q_vector->num_ring_rx) {
			q_vector->rx.itr =
				ITR_TO_REG(vsi->rx_rings[rxq]->rx_itr_setting,
					   itr_gran);
			q_vector->rx.latency_range = ICE_LOW_LATENCY;
		}

		if (q_vector->num_ring_tx) {
			q_vector->tx.itr =
				ITR_TO_REG(vsi->tx_rings[txq]->tx_itr_setting,
					   itr_gran);
			q_vector->tx.latency_range = ICE_LOW_LATENCY;
		}
		wr32(hw, GLINT_ITR(ICE_RX_ITR, vector), q_vector->rx.itr);
		wr32(hw, GLINT_ITR(ICE_TX_ITR, vector), q_vector->tx.itr);

		/* Both Transmit Queue Interrupt Cause Control register
		 * and Receive Queue Interrupt Cause control register
		 * expects MSIX_INDX field to be the vector index
		 * within the function space and not the absolute
		 * vector index across PF or across device.
		 * For SR-IOV VF VSIs queue vector index always starts
		 * with 1 since first vector index(0) is used for OICR
		 * in VF space. Since VMDq and other PF VSIs are within
		 * the PF function space, use the vector index that is
		 * tracked for this PF.
		 */
		for (q = 0; q < q_vector->num_ring_tx; q++) {
			u32 val;

			itr = ICE_ITR_NONE;
			val = QINT_TQCTL_CAUSE_ENA_M |
			      (itr << QINT_TQCTL_ITR_INDX_S)  |
			      (vector << QINT_TQCTL_MSIX_INDX_S);
			wr32(hw, QINT_TQCTL(vsi->txq_map[txq]), val);
			txq++;
		}

		for (q = 0; q < q_vector->num_ring_rx; q++) {
			u32 val;

			itr = ICE_ITR_NONE;
			val = QINT_RQCTL_CAUSE_ENA_M |
			      (itr << QINT_RQCTL_ITR_INDX_S)  |
			      (vector << QINT_RQCTL_MSIX_INDX_S);
			wr32(hw, QINT_RQCTL(vsi->rxq_map[rxq]), val);
			rxq++;
		}
	}

	ice_flush(hw);
}

/**
 * ice_vsi_manage_vlan_insertion - Manage VLAN insertion for the VSI for Tx
 * @vsi: the VSI being changed
 */
int ice_vsi_manage_vlan_insertion(struct ice_vsi *vsi)
{
	struct device *dev = &vsi->back->pdev->dev;
	struct ice_hw *hw = &vsi->back->hw;
	struct ice_vsi_ctx ctxt = { 0 };
	enum ice_status status;

	/* Here we are configuring the VSI to let the driver add VLAN tags by
	 * setting vlan_flags to ICE_AQ_VSI_VLAN_MODE_ALL. The actual VLAN tag
	 * insertion happens in the Tx hot path, in ice_tx_map.
	 */
	ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_ALL;

	ctxt.info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID);
	ctxt.vsi_num = vsi->vsi_num;

	status = ice_aq_update_vsi(hw, &ctxt, NULL);
	if (status) {
		dev_err(dev, "update VSI for VLAN insert failed, err %d aq_err %d\n",
			status, hw->adminq.sq_last_status);
		return -EIO;
	}

	vsi->info.vlan_flags = ctxt.info.vlan_flags;
	return 0;
}

/**
 * ice_vsi_manage_vlan_stripping - Manage VLAN stripping for the VSI for Rx
 * @vsi: the VSI being changed
 * @ena: boolean value indicating if this is a enable or disable request
 */
int ice_vsi_manage_vlan_stripping(struct ice_vsi *vsi, bool ena)
{
	struct device *dev = &vsi->back->pdev->dev;
	struct ice_hw *hw = &vsi->back->hw;
	struct ice_vsi_ctx ctxt = { 0 };
	enum ice_status status;

	/* Here we are configuring what the VSI should do with the VLAN tag in
	 * the Rx packet. We can either leave the tag in the packet or put it in
	 * the Rx descriptor.
	 */
	if (ena) {
		/* Strip VLAN tag from Rx packet and put it in the desc */
		ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_EMOD_STR_BOTH;
	} else {
		/* Disable stripping. Leave tag in packet */
		ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_EMOD_NOTHING;
	}

	/* Allow all packets untagged/tagged */
	ctxt.info.vlan_flags |= ICE_AQ_VSI_VLAN_MODE_ALL;

	ctxt.info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID);
	ctxt.vsi_num = vsi->vsi_num;

	status = ice_aq_update_vsi(hw, &ctxt, NULL);
	if (status) {
		dev_err(dev, "update VSI for VLAN strip failed, ena = %d err %d aq_err %d\n",
			ena, status, hw->adminq.sq_last_status);
		return -EIO;
	}

	vsi->info.vlan_flags = ctxt.info.vlan_flags;
	return 0;
}

/**
 * ice_vsi_start_rx_rings - start VSI's Rx rings
 * @vsi: the VSI whose rings are to be started
 *
 * Returns 0 on success and a negative value on error
 */
int ice_vsi_start_rx_rings(struct ice_vsi *vsi)
{
	return ice_vsi_ctrl_rx_rings(vsi, true);
}

/**
 * ice_vsi_stop_rx_rings - stop VSI's Rx rings
 * @vsi: the VSI
 *
 * Returns 0 on success and a negative value on error
 */
int ice_vsi_stop_rx_rings(struct ice_vsi *vsi)
{
	return ice_vsi_ctrl_rx_rings(vsi, false);
}

/**
 * ice_vsi_stop_tx_rings - Disable Tx rings
 * @vsi: the VSI being configured
 */
int ice_vsi_stop_tx_rings(struct ice_vsi *vsi)
{
	struct ice_pf *pf = vsi->back;
	struct ice_hw *hw = &pf->hw;
	enum ice_status status;
	u32 *q_teids, val;
	u16 *q_ids, i;
	int err = 0;

	if (vsi->num_txq > ICE_LAN_TXQ_MAX_QDIS)
		return -EINVAL;

	q_teids = devm_kcalloc(&pf->pdev->dev, vsi->num_txq, sizeof(*q_teids),
			       GFP_KERNEL);
	if (!q_teids)
		return -ENOMEM;

	q_ids = devm_kcalloc(&pf->pdev->dev, vsi->num_txq, sizeof(*q_ids),
			     GFP_KERNEL);
	if (!q_ids) {
		err = -ENOMEM;
		goto err_alloc_q_ids;
	}

	/* set up the Tx queue list to be disabled */
	ice_for_each_txq(vsi, i) {
		u16 v_idx;

		if (!vsi->tx_rings || !vsi->tx_rings[i]) {
			err = -EINVAL;
			goto err_out;
		}

		q_ids[i] = vsi->txq_map[i];
		q_teids[i] = vsi->tx_rings[i]->txq_teid;

		/* clear cause_ena bit for disabled queues */
		val = rd32(hw, QINT_TQCTL(vsi->tx_rings[i]->reg_idx));
		val &= ~QINT_TQCTL_CAUSE_ENA_M;
		wr32(hw, QINT_TQCTL(vsi->tx_rings[i]->reg_idx), val);

		/* software is expected to wait for 100 ns */
		ndelay(100);

		/* trigger a software interrupt for the vector associated to
		 * the queue to schedule NAPI handler
		 */
		v_idx = vsi->tx_rings[i]->q_vector->v_idx;
		wr32(hw, GLINT_DYN_CTL(vsi->base_vector + v_idx),
		     GLINT_DYN_CTL_SWINT_TRIG_M | GLINT_DYN_CTL_INTENA_MSK_M);
	}
	status = ice_dis_vsi_txq(vsi->port_info, vsi->num_txq, q_ids, q_teids,
				 NULL);
	/* if the disable queue command was exercised during an active reset
	 * flow, ICE_ERR_RESET_ONGOING is returned. This is not an error as
	 * the reset operation disables queues at the hardware level anyway.
	 */
	if (status == ICE_ERR_RESET_ONGOING) {
		dev_info(&pf->pdev->dev,
			 "Reset in progress. LAN Tx queues already disabled\n");
	} else if (status) {
		dev_err(&pf->pdev->dev,
			"Failed to disable LAN Tx queues, error: %d\n",
			status);
		err = -ENODEV;
	}

err_out:
	devm_kfree(&pf->pdev->dev, q_ids);

err_alloc_q_ids:
	devm_kfree(&pf->pdev->dev, q_teids);

	return err;
}