linux/drivers/clk/qcom/clk-cpu-8996.c

581 lines
16 KiB
C
Raw Normal View History

clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
/*
* Each of the CPU clusters (Power and Perf) on msm8996 are
* clocked via 2 PLLs, a primary and alternate. There are also
* 2 Mux'es, a primary and secondary all connected together
* as shown below
*
* +-------+
* XO | |
* +------------------>0 |
* SYS_APCS_AUX | |
* +------------------>3 |
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
* | |
* PLL/2 | SMUX +----+
* +------->1 | |
* | | | |
* | +-------+ | +-------+
* | +---->0 |
* | | |
* +---------------+ | +----------->1 | CPU clk
* |Primary PLL +----+ PLL_EARLY | | +------>
* | +------+-----------+ +------>2 PMUX |
* +---------------+ | | | |
* | +------+ | +-->3 |
* +--^+ ACD +-----+ | +-------+
* +---------------+ +------+ |
* |Alt PLL | |
* | +---------------------------+
* +---------------+ PLL_EARLY
*
* The primary PLL is what drives the CPU clk, except for times
* when we are reprogramming the PLL itself (for rate changes) when
* we temporarily switch to an alternate PLL.
*
* The primary PLL operates on a single VCO range, between 600MHz
* and 3GHz. However the CPUs do support OPPs with frequencies
* between 300MHz and 600MHz. In order to support running the CPUs
* at those frequencies we end up having to lock the PLL at twice
* the rate and drive the CPU clk via the PLL/2 output and SMUX.
*
* So for frequencies above 600MHz we follow the following path
* Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk
* and for frequencies between 300MHz and 600MHz we follow
* Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk
*
* ACD stands for Adaptive Clock Distribution and is used to
* detect voltage droops.
*/
#include <linux/bitfield.h>
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <soc/qcom/kryo-l2-accessors.h>
#include "clk-alpha-pll.h"
#include "clk-regmap.h"
#include "clk-regmap-mux.h"
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
enum _pmux_input {
SMUX_INDEX = 0,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
PLL_INDEX,
ACD_INDEX,
ALT_INDEX,
NUM_OF_PMUX_INPUTS
};
#define DIV_2_THRESHOLD 600000000
#define PWRCL_REG_OFFSET 0x0
#define PERFCL_REG_OFFSET 0x80000
#define MUX_OFFSET 0x40
#define ALT_PLL_OFFSET 0x100
#define SSSCTL_OFFSET 0x160
#define PMUX_MASK 0x3
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
static const u8 prim_pll_regs[PLL_OFF_MAX_REGS] = {
[PLL_OFF_L_VAL] = 0x04,
[PLL_OFF_ALPHA_VAL] = 0x08,
[PLL_OFF_USER_CTL] = 0x10,
[PLL_OFF_CONFIG_CTL] = 0x18,
[PLL_OFF_CONFIG_CTL_U] = 0x1c,
[PLL_OFF_TEST_CTL] = 0x20,
[PLL_OFF_TEST_CTL_U] = 0x24,
[PLL_OFF_STATUS] = 0x28,
};
static const u8 alt_pll_regs[PLL_OFF_MAX_REGS] = {
[PLL_OFF_L_VAL] = 0x04,
[PLL_OFF_ALPHA_VAL] = 0x08,
[PLL_OFF_USER_CTL] = 0x10,
[PLL_OFF_CONFIG_CTL] = 0x18,
[PLL_OFF_TEST_CTL] = 0x20,
[PLL_OFF_STATUS] = 0x28,
};
/* PLLs */
static const struct alpha_pll_config hfpll_config = {
.l = 54,
.config_ctl_val = 0x200d4828,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.config_ctl_hi_val = 0x006,
.test_ctl_val = 0x1c000000,
.test_ctl_hi_val = 0x00004000,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.pre_div_mask = BIT(12),
.post_div_mask = 0x3 << 8,
.post_div_val = 0x1 << 8,
.main_output_mask = BIT(0),
.early_output_mask = BIT(3),
};
static const struct clk_parent_data pll_parent[] = {
{ .fw_name = "xo" },
};
static struct clk_alpha_pll pwrcl_pll = {
.offset = PWRCL_REG_OFFSET,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.regs = prim_pll_regs,
.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data){
.name = "pwrcl_pll",
.parent_data = pll_parent,
.num_parents = ARRAY_SIZE(pll_parent),
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.ops = &clk_alpha_pll_huayra_ops,
},
};
static struct clk_alpha_pll perfcl_pll = {
.offset = PERFCL_REG_OFFSET,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.regs = prim_pll_regs,
.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data){
.name = "perfcl_pll",
.parent_data = pll_parent,
.num_parents = ARRAY_SIZE(pll_parent),
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.ops = &clk_alpha_pll_huayra_ops,
},
};
static struct clk_fixed_factor pwrcl_pll_postdiv = {
.mult = 1,
.div = 2,
.hw.init = &(struct clk_init_data){
.name = "pwrcl_pll_postdiv",
.parent_data = &(const struct clk_parent_data){
.hw = &pwrcl_pll.clkr.hw
},
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_fixed_factor perfcl_pll_postdiv = {
.mult = 1,
.div = 2,
.hw.init = &(struct clk_init_data){
.name = "perfcl_pll_postdiv",
.parent_data = &(const struct clk_parent_data){
.hw = &perfcl_pll.clkr.hw
},
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_fixed_factor perfcl_pll_acd = {
.mult = 1,
.div = 1,
.hw.init = &(struct clk_init_data){
.name = "perfcl_pll_acd",
.parent_data = &(const struct clk_parent_data){
.hw = &perfcl_pll.clkr.hw
},
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_fixed_factor pwrcl_pll_acd = {
.mult = 1,
.div = 1,
.hw.init = &(struct clk_init_data){
.name = "pwrcl_pll_acd",
.parent_data = &(const struct clk_parent_data){
.hw = &pwrcl_pll.clkr.hw
},
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
static const struct pll_vco alt_pll_vco_modes[] = {
VCO(3, 250000000, 500000000),
VCO(2, 500000000, 750000000),
VCO(1, 750000000, 1000000000),
VCO(0, 1000000000, 2150400000),
};
static const struct alpha_pll_config altpll_config = {
.l = 16,
.vco_val = 0x3 << 20,
.vco_mask = 0x3 << 20,
.config_ctl_val = 0x4001051b,
.post_div_mask = 0x3 << 8,
.post_div_val = 0x1 << 8,
.main_output_mask = BIT(0),
.early_output_mask = BIT(3),
};
static struct clk_alpha_pll pwrcl_alt_pll = {
.offset = PWRCL_REG_OFFSET + ALT_PLL_OFFSET,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.regs = alt_pll_regs,
.vco_table = alt_pll_vco_modes,
.num_vco = ARRAY_SIZE(alt_pll_vco_modes),
.flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data) {
.name = "pwrcl_alt_pll",
.parent_data = pll_parent,
.num_parents = ARRAY_SIZE(pll_parent),
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.ops = &clk_alpha_pll_hwfsm_ops,
},
};
static struct clk_alpha_pll perfcl_alt_pll = {
.offset = PERFCL_REG_OFFSET + ALT_PLL_OFFSET,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.regs = alt_pll_regs,
.vco_table = alt_pll_vco_modes,
.num_vco = ARRAY_SIZE(alt_pll_vco_modes),
.flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data) {
.name = "perfcl_alt_pll",
.parent_data = pll_parent,
.num_parents = ARRAY_SIZE(pll_parent),
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.ops = &clk_alpha_pll_hwfsm_ops,
},
};
struct clk_cpu_8996_pmux {
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
u32 reg;
struct notifier_block nb;
struct clk_regmap clkr;
};
static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
void *data);
#define to_clk_cpu_8996_pmux_nb(_nb) \
container_of(_nb, struct clk_cpu_8996_pmux, nb)
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
static inline struct clk_cpu_8996_pmux *to_clk_cpu_8996_pmux_hw(struct clk_hw *hw)
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
{
return container_of(to_clk_regmap(hw), struct clk_cpu_8996_pmux, clkr);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
}
static u8 clk_cpu_8996_pmux_get_parent(struct clk_hw *hw)
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
{
struct clk_regmap *clkr = to_clk_regmap(hw);
struct clk_cpu_8996_pmux *cpuclk = to_clk_cpu_8996_pmux_hw(hw);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
u32 val;
regmap_read(clkr->regmap, cpuclk->reg, &val);
return FIELD_GET(PMUX_MASK, val);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
}
static int clk_cpu_8996_pmux_set_parent(struct clk_hw *hw, u8 index)
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
{
struct clk_regmap *clkr = to_clk_regmap(hw);
struct clk_cpu_8996_pmux *cpuclk = to_clk_cpu_8996_pmux_hw(hw);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
u32 val;
val = FIELD_PREP(PMUX_MASK, index);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
return regmap_update_bits(clkr->regmap, cpuclk->reg, PMUX_MASK, val);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
}
static int clk_cpu_8996_pmux_determine_rate(struct clk_hw *hw,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
struct clk_rate_request *req)
{
struct clk_hw *parent;
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
if (req->rate < (DIV_2_THRESHOLD / 2))
return -EINVAL;
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
if (req->rate < DIV_2_THRESHOLD)
parent = clk_hw_get_parent_by_index(hw, SMUX_INDEX);
else
parent = clk_hw_get_parent_by_index(hw, ACD_INDEX);
if (!parent)
return -EINVAL;
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
req->best_parent_rate = clk_hw_round_rate(parent, req->rate);
req->best_parent_hw = parent;
return 0;
}
static const struct clk_ops clk_cpu_8996_pmux_ops = {
.set_parent = clk_cpu_8996_pmux_set_parent,
.get_parent = clk_cpu_8996_pmux_get_parent,
.determine_rate = clk_cpu_8996_pmux_determine_rate,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
};
static const struct parent_map smux_parent_map[] = {
{ .cfg = 0, }, /* xo */
{ .cfg = 1, }, /* pll */
{ .cfg = 3, }, /* sys_apcs_aux */
};
static const struct clk_parent_data pwrcl_smux_parents[] = {
{ .fw_name = "xo" },
{ .hw = &pwrcl_pll_postdiv.hw },
{ .fw_name = "sys_apcs_aux" },
};
static const struct clk_parent_data perfcl_smux_parents[] = {
{ .fw_name = "xo" },
{ .hw = &perfcl_pll_postdiv.hw },
{ .fw_name = "sys_apcs_aux" },
};
static struct clk_regmap_mux pwrcl_smux = {
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.reg = PWRCL_REG_OFFSET + MUX_OFFSET,
.shift = 2,
.width = 2,
.parent_map = smux_parent_map,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.clkr.hw.init = &(struct clk_init_data) {
.name = "pwrcl_smux",
.parent_data = pwrcl_smux_parents,
.num_parents = ARRAY_SIZE(pwrcl_smux_parents),
.ops = &clk_regmap_mux_closest_ops,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap_mux perfcl_smux = {
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.reg = PERFCL_REG_OFFSET + MUX_OFFSET,
.shift = 2,
.width = 2,
.parent_map = smux_parent_map,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.clkr.hw.init = &(struct clk_init_data) {
.name = "perfcl_smux",
.parent_data = perfcl_smux_parents,
.num_parents = ARRAY_SIZE(perfcl_smux_parents),
.ops = &clk_regmap_mux_closest_ops,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.flags = CLK_SET_RATE_PARENT,
},
};
static const struct clk_hw *pwrcl_pmux_parents[] = {
[SMUX_INDEX] = &pwrcl_smux.clkr.hw,
[PLL_INDEX] = &pwrcl_pll.clkr.hw,
[ACD_INDEX] = &pwrcl_pll_acd.hw,
[ALT_INDEX] = &pwrcl_alt_pll.clkr.hw,
};
static const struct clk_hw *perfcl_pmux_parents[] = {
[SMUX_INDEX] = &perfcl_smux.clkr.hw,
[PLL_INDEX] = &perfcl_pll.clkr.hw,
[ACD_INDEX] = &perfcl_pll_acd.hw,
[ALT_INDEX] = &perfcl_alt_pll.clkr.hw,
};
static struct clk_cpu_8996_pmux pwrcl_pmux = {
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.reg = PWRCL_REG_OFFSET + MUX_OFFSET,
.nb.notifier_call = cpu_clk_notifier_cb,
.clkr.hw.init = &(struct clk_init_data) {
.name = "pwrcl_pmux",
.parent_hws = pwrcl_pmux_parents,
.num_parents = ARRAY_SIZE(pwrcl_pmux_parents),
.ops = &clk_cpu_8996_pmux_ops,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
/* CPU clock is critical and should never be gated */
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
},
};
static struct clk_cpu_8996_pmux perfcl_pmux = {
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
.reg = PERFCL_REG_OFFSET + MUX_OFFSET,
.nb.notifier_call = cpu_clk_notifier_cb,
.clkr.hw.init = &(struct clk_init_data) {
.name = "perfcl_pmux",
.parent_hws = perfcl_pmux_parents,
.num_parents = ARRAY_SIZE(perfcl_pmux_parents),
.ops = &clk_cpu_8996_pmux_ops,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
/* CPU clock is critical and should never be gated */
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
},
};
static const struct regmap_config cpu_msm8996_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = 0x80210,
.fast_io = true,
.val_format_endian = REGMAP_ENDIAN_LITTLE,
};
static struct clk_hw *cpu_msm8996_hw_clks[] = {
&pwrcl_pll_postdiv.hw,
&perfcl_pll_postdiv.hw,
&pwrcl_pll_acd.hw,
&perfcl_pll_acd.hw,
};
static struct clk_regmap *cpu_msm8996_clks[] = {
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
&pwrcl_pll.clkr,
&perfcl_pll.clkr,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
&pwrcl_alt_pll.clkr,
&perfcl_alt_pll.clkr,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
&pwrcl_smux.clkr,
&perfcl_smux.clkr,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
&pwrcl_pmux.clkr,
&perfcl_pmux.clkr,
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
};
static int qcom_cpu_clk_msm8996_register_clks(struct device *dev,
struct regmap *regmap)
{
int i, ret;
for (i = 0; i < ARRAY_SIZE(cpu_msm8996_hw_clks); i++) {
ret = devm_clk_hw_register(dev, cpu_msm8996_hw_clks[i]);
if (ret)
return ret;
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
}
for (i = 0; i < ARRAY_SIZE(cpu_msm8996_clks); i++) {
ret = devm_clk_register_regmap(dev, cpu_msm8996_clks[i]);
if (ret)
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
return ret;
}
clk_alpha_pll_configure(&pwrcl_pll, regmap, &hfpll_config);
clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
/* Enable alt PLLs */
clk_prepare_enable(pwrcl_alt_pll.clkr.hw.clk);
clk_prepare_enable(perfcl_alt_pll.clkr.hw.clk);
devm_clk_notifier_register(dev, pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb);
devm_clk_notifier_register(dev, perfcl_pmux.clkr.hw.clk, &perfcl_pmux.nb);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
return ret;
}
#define CPU_AFINITY_MASK 0xFFF
#define PWRCL_CPU_REG_MASK 0x3
#define PERFCL_CPU_REG_MASK 0x103
#define L2ACDCR_REG 0x580ULL
#define L2ACDTD_REG 0x581ULL
#define L2ACDDVMRC_REG 0x584ULL
#define L2ACDSSCR_REG 0x589ULL
static DEFINE_SPINLOCK(qcom_clk_acd_lock);
static void __iomem *base;
static void qcom_cpu_clk_msm8996_acd_init(void __iomem *base)
{
u64 hwid;
u32 val;
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
unsigned long flags;
spin_lock_irqsave(&qcom_clk_acd_lock, flags);
val = kryo_l2_get_indirect_reg(L2ACDTD_REG);
if (val == 0x00006a11)
goto out;
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
hwid = read_cpuid_mpidr() & CPU_AFINITY_MASK;
kryo_l2_set_indirect_reg(L2ACDTD_REG, 0x00006a11);
kryo_l2_set_indirect_reg(L2ACDDVMRC_REG, 0x000e0f0f);
kryo_l2_set_indirect_reg(L2ACDSSCR_REG, 0x00000601);
if (PWRCL_CPU_REG_MASK == (hwid | PWRCL_CPU_REG_MASK)) {
writel(0xf, base + PWRCL_REG_OFFSET + SSSCTL_OFFSET);
kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002c5ffd);
}
if (PERFCL_CPU_REG_MASK == (hwid | PERFCL_CPU_REG_MASK)) {
kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002c5ffd);
writel(0xf, base + PERFCL_REG_OFFSET + SSSCTL_OFFSET);
}
out:
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
spin_unlock_irqrestore(&qcom_clk_acd_lock, flags);
}
static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
void *data)
{
struct clk_cpu_8996_pmux *cpuclk = to_clk_cpu_8996_pmux_nb(nb);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
struct clk_notifier_data *cnd = data;
int ret;
switch (event) {
case PRE_RATE_CHANGE:
ret = clk_cpu_8996_pmux_set_parent(&cpuclk->clkr.hw, ALT_INDEX);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
qcom_cpu_clk_msm8996_acd_init(base);
break;
case POST_RATE_CHANGE:
if (cnd->new_rate < DIV_2_THRESHOLD)
ret = clk_cpu_8996_pmux_set_parent(&cpuclk->clkr.hw,
SMUX_INDEX);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
else
ret = clk_cpu_8996_pmux_set_parent(&cpuclk->clkr.hw,
ACD_INDEX);
clk: qcom: Add CPU clock driver for msm8996 Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84 Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 16:49:42 +08:00
break;
default:
ret = 0;
break;
}
return notifier_from_errno(ret);
};
static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev)
{
struct regmap *regmap;
struct clk_hw_onecell_data *data;
struct device *dev = &pdev->dev;
int ret;
data = devm_kzalloc(dev, struct_size(data, hws, 2), GFP_KERNEL);
if (!data)
return -ENOMEM;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(dev, base, &cpu_msm8996_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
ret = qcom_cpu_clk_msm8996_register_clks(dev, regmap);
if (ret)
return ret;
qcom_cpu_clk_msm8996_acd_init(base);
data->hws[0] = &pwrcl_pmux.clkr.hw;
data->hws[1] = &perfcl_pmux.clkr.hw;
data->num = 2;
return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, data);
}
static const struct of_device_id qcom_cpu_clk_msm8996_match_table[] = {
{ .compatible = "qcom,msm8996-apcc" },
{}
};
MODULE_DEVICE_TABLE(of, qcom_cpu_clk_msm8996_match_table);
static struct platform_driver qcom_cpu_clk_msm8996_driver = {
.probe = qcom_cpu_clk_msm8996_driver_probe,
.driver = {
.name = "qcom-msm8996-apcc",
.of_match_table = qcom_cpu_clk_msm8996_match_table,
},
};
module_platform_driver(qcom_cpu_clk_msm8996_driver);
MODULE_DESCRIPTION("QCOM MSM8996 CPU Clock Driver");
MODULE_LICENSE("GPL v2");