2018-09-26 10:42:18 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
|
// Copyright (C) 2018 Intel Corporation
|
|
|
|
|
|
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
|
#include <linux/acpi.h>
|
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
#include <linux/pm_runtime.h>
|
|
|
|
|
#include <media/v4l2-ctrls.h>
|
|
|
|
|
#include <media/v4l2-device.h>
|
|
|
|
|
#include <media/v4l2-event.h>
|
|
|
|
|
#include <media/v4l2-fwnode.h>
|
|
|
|
|
|
|
|
|
|
#define IMX319_REG_MODE_SELECT 0x0100
|
|
|
|
|
#define IMX319_MODE_STANDBY 0x00
|
|
|
|
|
#define IMX319_MODE_STREAMING 0x01
|
|
|
|
|
|
|
|
|
|
/* Chip ID */
|
|
|
|
|
#define IMX319_REG_CHIP_ID 0x0016
|
|
|
|
|
#define IMX319_CHIP_ID 0x0319
|
|
|
|
|
|
|
|
|
|
/* V_TIMING internal */
|
|
|
|
|
#define IMX319_REG_FLL 0x0340
|
|
|
|
|
#define IMX319_FLL_MAX 0xffff
|
|
|
|
|
|
|
|
|
|
/* Exposure control */
|
|
|
|
|
#define IMX319_REG_EXPOSURE 0x0202
|
|
|
|
|
#define IMX319_EXPOSURE_MIN 1
|
|
|
|
|
#define IMX319_EXPOSURE_STEP 1
|
|
|
|
|
#define IMX319_EXPOSURE_DEFAULT 0x04f6
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* the digital control register for all color control looks like:
|
|
|
|
|
* +-----------------+------------------+
|
|
|
|
|
* | [7:0] | [15:8] |
|
|
|
|
|
* +-----------------+------------------+
|
|
|
|
|
* | 0x020f | 0x020e |
|
|
|
|
|
* --------------------------------------
|
|
|
|
|
* it is used to calculate the digital gain times value(integral + fractional)
|
|
|
|
|
* the [15:8] bits is the fractional part and [7:0] bits is the integral
|
|
|
|
|
* calculation equation is:
|
|
|
|
|
* gain value (unit: times) = REG[15:8] + REG[7:0]/0x100
|
|
|
|
|
* Only value in 0x0100 ~ 0x0FFF range is allowed.
|
|
|
|
|
* Analog gain use 10 bits in the registers and allowed range is 0 ~ 960
|
|
|
|
|
*/
|
|
|
|
|
/* Analog gain control */
|
|
|
|
|
#define IMX319_REG_ANALOG_GAIN 0x0204
|
|
|
|
|
#define IMX319_ANA_GAIN_MIN 0
|
|
|
|
|
#define IMX319_ANA_GAIN_MAX 960
|
|
|
|
|
#define IMX319_ANA_GAIN_STEP 1
|
|
|
|
|
#define IMX319_ANA_GAIN_DEFAULT 0
|
|
|
|
|
|
|
|
|
|
/* Digital gain control */
|
|
|
|
|
#define IMX319_REG_DPGA_USE_GLOBAL_GAIN 0x3ff9
|
|
|
|
|
#define IMX319_REG_DIG_GAIN_GLOBAL 0x020e
|
|
|
|
|
#define IMX319_DGTL_GAIN_MIN 256
|
|
|
|
|
#define IMX319_DGTL_GAIN_MAX 4095
|
|
|
|
|
#define IMX319_DGTL_GAIN_STEP 1
|
|
|
|
|
#define IMX319_DGTL_GAIN_DEFAULT 256
|
|
|
|
|
|
|
|
|
|
/* Test Pattern Control */
|
|
|
|
|
#define IMX319_REG_TEST_PATTERN 0x0600
|
|
|
|
|
#define IMX319_TEST_PATTERN_DISABLED 0
|
|
|
|
|
#define IMX319_TEST_PATTERN_SOLID_COLOR 1
|
|
|
|
|
#define IMX319_TEST_PATTERN_COLOR_BARS 2
|
|
|
|
|
#define IMX319_TEST_PATTERN_GRAY_COLOR_BARS 3
|
|
|
|
|
#define IMX319_TEST_PATTERN_PN9 4
|
|
|
|
|
|
|
|
|
|
/* Flip Control */
|
|
|
|
|
#define IMX319_REG_ORIENTATION 0x0101
|
|
|
|
|
|
|
|
|
|
/* default link frequency and external clock */
|
|
|
|
|
#define IMX319_LINK_FREQ_DEFAULT 482400000
|
|
|
|
|
#define IMX319_EXT_CLK 19200000
|
|
|
|
|
#define IMX319_LINK_FREQ_INDEX 0
|
|
|
|
|
|
|
|
|
|
struct imx319_reg {
|
|
|
|
|
u16 address;
|
|
|
|
|
u8 val;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct imx319_reg_list {
|
|
|
|
|
u32 num_of_regs;
|
|
|
|
|
const struct imx319_reg *regs;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Mode : resolution and related config&values */
|
|
|
|
|
struct imx319_mode {
|
|
|
|
|
/* Frame width */
|
|
|
|
|
u32 width;
|
|
|
|
|
/* Frame height */
|
|
|
|
|
u32 height;
|
|
|
|
|
|
|
|
|
|
/* V-timing */
|
|
|
|
|
u32 fll_def;
|
|
|
|
|
u32 fll_min;
|
|
|
|
|
|
|
|
|
|
/* H-timing */
|
|
|
|
|
u32 llp;
|
|
|
|
|
|
|
|
|
|
/* index of link frequency */
|
|
|
|
|
u32 link_freq_index;
|
|
|
|
|
|
|
|
|
|
/* Default register values */
|
|
|
|
|
struct imx319_reg_list reg_list;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct imx319_hwcfg {
|
|
|
|
|
u32 ext_clk; /* sensor external clk */
|
|
|
|
|
s64 *link_freqs; /* CSI-2 link frequencies */
|
|
|
|
|
unsigned int nr_of_link_freqs;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct imx319 {
|
|
|
|
|
struct v4l2_subdev sd;
|
|
|
|
|
struct media_pad pad;
|
|
|
|
|
|
|
|
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
|
|
|
/* V4L2 Controls */
|
|
|
|
|
struct v4l2_ctrl *link_freq;
|
|
|
|
|
struct v4l2_ctrl *pixel_rate;
|
|
|
|
|
struct v4l2_ctrl *vblank;
|
|
|
|
|
struct v4l2_ctrl *hblank;
|
|
|
|
|
struct v4l2_ctrl *exposure;
|
|
|
|
|
struct v4l2_ctrl *vflip;
|
|
|
|
|
struct v4l2_ctrl *hflip;
|
|
|
|
|
|
|
|
|
|
/* Current mode */
|
|
|
|
|
const struct imx319_mode *cur_mode;
|
|
|
|
|
|
|
|
|
|
struct imx319_hwcfg *hwcfg;
|
|
|
|
|
s64 link_def_freq; /* CSI-2 link default frequency */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Mutex for serialized access:
|
|
|
|
|
* Protect sensor set pad format and start/stop streaming safely.
|
|
|
|
|
* Protect access to sensor v4l2 controls.
|
|
|
|
|
*/
|
|
|
|
|
struct mutex mutex;
|
|
|
|
|
|
|
|
|
|
/* Streaming on/off */
|
|
|
|
|
bool streaming;
|
2021-10-18 20:17:28 +08:00
|
|
|
/* True if the device has been identified */
|
|
|
|
|
bool identified;
|
2018-09-26 10:42:18 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct imx319_reg imx319_global_regs[] = {
|
|
|
|
|
{ 0x0136, 0x13 },
|
|
|
|
|
{ 0x0137, 0x33 },
|
|
|
|
|
{ 0x3c7e, 0x05 },
|
|
|
|
|
{ 0x3c7f, 0x07 },
|
|
|
|
|
{ 0x4d39, 0x0b },
|
|
|
|
|
{ 0x4d41, 0x33 },
|
|
|
|
|
{ 0x4d43, 0x0c },
|
|
|
|
|
{ 0x4d49, 0x89 },
|
|
|
|
|
{ 0x4e05, 0x0b },
|
|
|
|
|
{ 0x4e0d, 0x33 },
|
|
|
|
|
{ 0x4e0f, 0x0c },
|
|
|
|
|
{ 0x4e15, 0x89 },
|
|
|
|
|
{ 0x4e49, 0x2a },
|
|
|
|
|
{ 0x4e51, 0x33 },
|
|
|
|
|
{ 0x4e53, 0x0c },
|
|
|
|
|
{ 0x4e59, 0x89 },
|
|
|
|
|
{ 0x5601, 0x4f },
|
|
|
|
|
{ 0x560b, 0x45 },
|
|
|
|
|
{ 0x562f, 0x0a },
|
|
|
|
|
{ 0x5643, 0x0a },
|
|
|
|
|
{ 0x5645, 0x0c },
|
|
|
|
|
{ 0x56ef, 0x51 },
|
|
|
|
|
{ 0x586f, 0x33 },
|
|
|
|
|
{ 0x5873, 0x89 },
|
|
|
|
|
{ 0x5905, 0x33 },
|
|
|
|
|
{ 0x5907, 0x89 },
|
|
|
|
|
{ 0x590d, 0x33 },
|
|
|
|
|
{ 0x590f, 0x89 },
|
|
|
|
|
{ 0x5915, 0x33 },
|
|
|
|
|
{ 0x5917, 0x89 },
|
|
|
|
|
{ 0x5969, 0x1c },
|
|
|
|
|
{ 0x596b, 0x72 },
|
|
|
|
|
{ 0x5971, 0x33 },
|
|
|
|
|
{ 0x5973, 0x89 },
|
|
|
|
|
{ 0x5975, 0x33 },
|
|
|
|
|
{ 0x5977, 0x89 },
|
|
|
|
|
{ 0x5979, 0x1c },
|
|
|
|
|
{ 0x597b, 0x72 },
|
|
|
|
|
{ 0x5985, 0x33 },
|
|
|
|
|
{ 0x5987, 0x89 },
|
|
|
|
|
{ 0x5999, 0x1c },
|
|
|
|
|
{ 0x599b, 0x72 },
|
|
|
|
|
{ 0x59a5, 0x33 },
|
|
|
|
|
{ 0x59a7, 0x89 },
|
|
|
|
|
{ 0x7485, 0x08 },
|
|
|
|
|
{ 0x7487, 0x0c },
|
|
|
|
|
{ 0x7489, 0xc7 },
|
|
|
|
|
{ 0x748b, 0x8b },
|
|
|
|
|
{ 0x9004, 0x09 },
|
|
|
|
|
{ 0x9200, 0x6a },
|
|
|
|
|
{ 0x9201, 0x22 },
|
|
|
|
|
{ 0x9202, 0x6a },
|
|
|
|
|
{ 0x9203, 0x23 },
|
|
|
|
|
{ 0x9204, 0x5f },
|
|
|
|
|
{ 0x9205, 0x23 },
|
|
|
|
|
{ 0x9206, 0x5f },
|
|
|
|
|
{ 0x9207, 0x24 },
|
|
|
|
|
{ 0x9208, 0x5f },
|
|
|
|
|
{ 0x9209, 0x26 },
|
|
|
|
|
{ 0x920a, 0x5f },
|
|
|
|
|
{ 0x920b, 0x27 },
|
|
|
|
|
{ 0x920c, 0x5f },
|
|
|
|
|
{ 0x920d, 0x29 },
|
|
|
|
|
{ 0x920e, 0x5f },
|
|
|
|
|
{ 0x920f, 0x2a },
|
|
|
|
|
{ 0x9210, 0x5f },
|
|
|
|
|
{ 0x9211, 0x2c },
|
|
|
|
|
{ 0xbc22, 0x1a },
|
|
|
|
|
{ 0xf01f, 0x04 },
|
|
|
|
|
{ 0xf021, 0x03 },
|
|
|
|
|
{ 0xf023, 0x02 },
|
|
|
|
|
{ 0xf03d, 0x05 },
|
|
|
|
|
{ 0xf03f, 0x03 },
|
|
|
|
|
{ 0xf041, 0x02 },
|
|
|
|
|
{ 0xf0af, 0x04 },
|
|
|
|
|
{ 0xf0b1, 0x03 },
|
|
|
|
|
{ 0xf0b3, 0x02 },
|
|
|
|
|
{ 0xf0cd, 0x05 },
|
|
|
|
|
{ 0xf0cf, 0x03 },
|
|
|
|
|
{ 0xf0d1, 0x02 },
|
|
|
|
|
{ 0xf13f, 0x04 },
|
|
|
|
|
{ 0xf141, 0x03 },
|
|
|
|
|
{ 0xf143, 0x02 },
|
|
|
|
|
{ 0xf15d, 0x05 },
|
|
|
|
|
{ 0xf15f, 0x03 },
|
|
|
|
|
{ 0xf161, 0x02 },
|
|
|
|
|
{ 0xf1cf, 0x04 },
|
|
|
|
|
{ 0xf1d1, 0x03 },
|
|
|
|
|
{ 0xf1d3, 0x02 },
|
|
|
|
|
{ 0xf1ed, 0x05 },
|
|
|
|
|
{ 0xf1ef, 0x03 },
|
|
|
|
|
{ 0xf1f1, 0x02 },
|
|
|
|
|
{ 0xf287, 0x04 },
|
|
|
|
|
{ 0xf289, 0x03 },
|
|
|
|
|
{ 0xf28b, 0x02 },
|
|
|
|
|
{ 0xf2a5, 0x05 },
|
|
|
|
|
{ 0xf2a7, 0x03 },
|
|
|
|
|
{ 0xf2a9, 0x02 },
|
|
|
|
|
{ 0xf2b7, 0x04 },
|
|
|
|
|
{ 0xf2b9, 0x03 },
|
|
|
|
|
{ 0xf2bb, 0x02 },
|
|
|
|
|
{ 0xf2d5, 0x05 },
|
|
|
|
|
{ 0xf2d7, 0x03 },
|
|
|
|
|
{ 0xf2d9, 0x02 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct imx319_reg_list imx319_global_setting = {
|
|
|
|
|
.num_of_regs = ARRAY_SIZE(imx319_global_regs),
|
|
|
|
|
.regs = imx319_global_regs,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct imx319_reg mode_3264x2448_regs[] = {
|
|
|
|
|
{ 0x0112, 0x0a },
|
|
|
|
|
{ 0x0113, 0x0a },
|
|
|
|
|
{ 0x0114, 0x03 },
|
|
|
|
|
{ 0x0342, 0x0f },
|
|
|
|
|
{ 0x0343, 0x80 },
|
|
|
|
|
{ 0x0340, 0x0c },
|
|
|
|
|
{ 0x0341, 0xaa },
|
|
|
|
|
{ 0x0344, 0x00 },
|
|
|
|
|
{ 0x0345, 0x00 },
|
|
|
|
|
{ 0x0346, 0x00 },
|
|
|
|
|
{ 0x0347, 0x00 },
|
|
|
|
|
{ 0x0348, 0x0c },
|
|
|
|
|
{ 0x0349, 0xcf },
|
|
|
|
|
{ 0x034a, 0x09 },
|
|
|
|
|
{ 0x034b, 0x9f },
|
|
|
|
|
{ 0x0220, 0x00 },
|
|
|
|
|
{ 0x0221, 0x11 },
|
|
|
|
|
{ 0x0381, 0x01 },
|
|
|
|
|
{ 0x0383, 0x01 },
|
|
|
|
|
{ 0x0385, 0x01 },
|
|
|
|
|
{ 0x0387, 0x01 },
|
|
|
|
|
{ 0x0900, 0x00 },
|
|
|
|
|
{ 0x0901, 0x11 },
|
|
|
|
|
{ 0x0902, 0x0a },
|
|
|
|
|
{ 0x3140, 0x02 },
|
|
|
|
|
{ 0x3141, 0x00 },
|
|
|
|
|
{ 0x3f0d, 0x0a },
|
|
|
|
|
{ 0x3f14, 0x01 },
|
|
|
|
|
{ 0x3f3c, 0x01 },
|
|
|
|
|
{ 0x3f4d, 0x01 },
|
|
|
|
|
{ 0x3f4c, 0x01 },
|
|
|
|
|
{ 0x4254, 0x7f },
|
|
|
|
|
{ 0x0401, 0x00 },
|
|
|
|
|
{ 0x0404, 0x00 },
|
|
|
|
|
{ 0x0405, 0x10 },
|
|
|
|
|
{ 0x0408, 0x00 },
|
|
|
|
|
{ 0x0409, 0x08 },
|
|
|
|
|
{ 0x040a, 0x00 },
|
|
|
|
|
{ 0x040b, 0x08 },
|
|
|
|
|
{ 0x040c, 0x0c },
|
|
|
|
|
{ 0x040d, 0xc0 },
|
|
|
|
|
{ 0x040e, 0x09 },
|
|
|
|
|
{ 0x040f, 0x90 },
|
|
|
|
|
{ 0x034c, 0x0c },
|
|
|
|
|
{ 0x034d, 0xc0 },
|
|
|
|
|
{ 0x034e, 0x09 },
|
|
|
|
|
{ 0x034f, 0x90 },
|
|
|
|
|
{ 0x3261, 0x00 },
|
|
|
|
|
{ 0x3264, 0x00 },
|
|
|
|
|
{ 0x3265, 0x10 },
|
|
|
|
|
{ 0x0301, 0x05 },
|
|
|
|
|
{ 0x0303, 0x04 },
|
|
|
|
|
{ 0x0305, 0x04 },
|
|
|
|
|
{ 0x0306, 0x01 },
|
|
|
|
|
{ 0x0307, 0x92 },
|
|
|
|
|
{ 0x0309, 0x0a },
|
|
|
|
|
{ 0x030b, 0x02 },
|
|
|
|
|
{ 0x030d, 0x02 },
|
|
|
|
|
{ 0x030e, 0x00 },
|
|
|
|
|
{ 0x030f, 0xfa },
|
|
|
|
|
{ 0x0310, 0x00 },
|
|
|
|
|
{ 0x0820, 0x0f },
|
|
|
|
|
{ 0x0821, 0x13 },
|
|
|
|
|
{ 0x0822, 0x33 },
|
|
|
|
|
{ 0x0823, 0x33 },
|
|
|
|
|
{ 0x3e20, 0x01 },
|
|
|
|
|
{ 0x3e37, 0x00 },
|
|
|
|
|
{ 0x3e3b, 0x01 },
|
|
|
|
|
{ 0x38a3, 0x01 },
|
|
|
|
|
{ 0x38a8, 0x00 },
|
|
|
|
|
{ 0x38a9, 0x00 },
|
|
|
|
|
{ 0x38aa, 0x00 },
|
|
|
|
|
{ 0x38ab, 0x00 },
|
|
|
|
|
{ 0x3234, 0x00 },
|
|
|
|
|
{ 0x3fc1, 0x00 },
|
|
|
|
|
{ 0x3235, 0x00 },
|
|
|
|
|
{ 0x3802, 0x00 },
|
|
|
|
|
{ 0x3143, 0x04 },
|
|
|
|
|
{ 0x360a, 0x00 },
|
|
|
|
|
{ 0x0b00, 0x00 },
|
|
|
|
|
{ 0x0106, 0x00 },
|
|
|
|
|
{ 0x0b05, 0x01 },
|
|
|
|
|
{ 0x0b06, 0x01 },
|
|
|
|
|
{ 0x3230, 0x00 },
|
|
|
|
|
{ 0x3602, 0x01 },
|
|
|
|
|
{ 0x3607, 0x01 },
|
|
|
|
|
{ 0x3c00, 0x00 },
|
|
|
|
|
{ 0x3c01, 0x48 },
|
|
|
|
|
{ 0x3c02, 0xc8 },
|
|
|
|
|
{ 0x3c03, 0xaa },
|
|
|
|
|
{ 0x3c04, 0x91 },
|
|
|
|
|
{ 0x3c05, 0x54 },
|
|
|
|
|
{ 0x3c06, 0x26 },
|
|
|
|
|
{ 0x3c07, 0x20 },
|
|
|
|
|
{ 0x3c08, 0x51 },
|
|
|
|
|
{ 0x3d80, 0x00 },
|
|
|
|
|
{ 0x3f50, 0x00 },
|
|
|
|
|
{ 0x3f56, 0x00 },
|
|
|
|
|
{ 0x3f57, 0x30 },
|
|
|
|
|
{ 0x3f78, 0x01 },
|
|
|
|
|
{ 0x3f79, 0x18 },
|
|
|
|
|
{ 0x3f7c, 0x00 },
|
|
|
|
|
{ 0x3f7d, 0x00 },
|
|
|
|
|
{ 0x3fba, 0x00 },
|
|
|
|
|
{ 0x3fbb, 0x00 },
|
|
|
|
|
{ 0xa081, 0x00 },
|
|
|
|
|
{ 0xe014, 0x00 },
|
|
|
|
|
{ 0x0202, 0x0a },
|
|
|
|
|
{ 0x0203, 0x7a },
|
|
|
|
|
{ 0x0224, 0x01 },
|
|
|
|
|
{ 0x0225, 0xf4 },
|
|
|
|
|
{ 0x0204, 0x00 },
|
|
|
|
|
{ 0x0205, 0x00 },
|
|
|
|
|
{ 0x0216, 0x00 },
|
|
|
|
|
{ 0x0217, 0x00 },
|
|
|
|
|
{ 0x020e, 0x01 },
|
|
|
|
|
{ 0x020f, 0x00 },
|
|
|
|
|
{ 0x0210, 0x01 },
|
|
|
|
|
{ 0x0211, 0x00 },
|
|
|
|
|
{ 0x0212, 0x01 },
|
|
|
|
|
{ 0x0213, 0x00 },
|
|
|
|
|
{ 0x0214, 0x01 },
|
|
|
|
|
{ 0x0215, 0x00 },
|
|
|
|
|
{ 0x0218, 0x01 },
|
|
|
|
|
{ 0x0219, 0x00 },
|
|
|
|
|
{ 0x3614, 0x00 },
|
|
|
|
|
{ 0x3616, 0x0d },
|
|
|
|
|
{ 0x3617, 0x56 },
|
|
|
|
|
{ 0xb612, 0x20 },
|
|
|
|
|
{ 0xb613, 0x20 },
|
|
|
|
|
{ 0xb614, 0x20 },
|
|
|
|
|
{ 0xb615, 0x20 },
|
|
|
|
|
{ 0xb616, 0x0a },
|
|
|
|
|
{ 0xb617, 0x0a },
|
|
|
|
|
{ 0xb618, 0x20 },
|
|
|
|
|
{ 0xb619, 0x20 },
|
|
|
|
|
{ 0xb61a, 0x20 },
|
|
|
|
|
{ 0xb61b, 0x20 },
|
|
|
|
|
{ 0xb61c, 0x0a },
|
|
|
|
|
{ 0xb61d, 0x0a },
|
|
|
|
|
{ 0xb666, 0x30 },
|
|
|
|
|
{ 0xb667, 0x30 },
|
|
|
|
|
{ 0xb668, 0x30 },
|
|
|
|
|
{ 0xb669, 0x30 },
|
|
|
|
|
{ 0xb66a, 0x14 },
|
|
|
|
|
{ 0xb66b, 0x14 },
|
|
|
|
|
{ 0xb66c, 0x20 },
|
|
|
|
|
{ 0xb66d, 0x20 },
|
|
|
|
|
{ 0xb66e, 0x20 },
|
|
|
|
|
{ 0xb66f, 0x20 },
|
|
|
|
|
{ 0xb670, 0x10 },
|
|
|
|
|
{ 0xb671, 0x10 },
|
|
|
|
|
{ 0x3237, 0x00 },
|
|
|
|
|
{ 0x3900, 0x00 },
|
|
|
|
|
{ 0x3901, 0x00 },
|
|
|
|
|
{ 0x3902, 0x00 },
|
|
|
|
|
{ 0x3904, 0x00 },
|
|
|
|
|
{ 0x3905, 0x00 },
|
|
|
|
|
{ 0x3906, 0x00 },
|
|
|
|
|
{ 0x3907, 0x00 },
|
|
|
|
|
{ 0x3908, 0x00 },
|
|
|
|
|
{ 0x3909, 0x00 },
|
|
|
|
|
{ 0x3912, 0x00 },
|
|
|
|
|
{ 0x3930, 0x00 },
|
|
|
|
|
{ 0x3931, 0x00 },
|
|
|
|
|
{ 0x3933, 0x00 },
|
|
|
|
|
{ 0x3934, 0x00 },
|
|
|
|
|
{ 0x3935, 0x00 },
|
|
|
|
|
{ 0x3936, 0x00 },
|
|
|
|
|
{ 0x3937, 0x00 },
|
|
|
|
|
{ 0x30ac, 0x00 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct imx319_reg mode_3280x2464_regs[] = {
|
|
|
|
|
{ 0x0112, 0x0a },
|
|
|
|
|
{ 0x0113, 0x0a },
|
|
|
|
|
{ 0x0114, 0x03 },
|
|
|
|
|
{ 0x0342, 0x0f },
|
|
|
|
|
{ 0x0343, 0x80 },
|
|
|
|
|
{ 0x0340, 0x0c },
|
|
|
|
|
{ 0x0341, 0xaa },
|
|
|
|
|
{ 0x0344, 0x00 },
|
|
|
|
|
{ 0x0345, 0x00 },
|
|
|
|
|
{ 0x0346, 0x00 },
|
|
|
|
|
{ 0x0347, 0x00 },
|
|
|
|
|
{ 0x0348, 0x0c },
|
|
|
|
|
{ 0x0349, 0xcf },
|
|
|
|
|
{ 0x034a, 0x09 },
|
|
|
|
|
{ 0x034b, 0x9f },
|
|
|
|
|
{ 0x0220, 0x00 },
|
|
|
|
|
{ 0x0221, 0x11 },
|
|
|
|
|
{ 0x0381, 0x01 },
|
|
|
|
|
{ 0x0383, 0x01 },
|
|
|
|
|
{ 0x0385, 0x01 },
|
|
|
|
|
{ 0x0387, 0x01 },
|
|
|
|
|
{ 0x0900, 0x00 },
|
|
|
|
|
{ 0x0901, 0x11 },
|
|
|
|
|
{ 0x0902, 0x0a },
|
|
|
|
|
{ 0x3140, 0x02 },
|
|
|
|
|
{ 0x3141, 0x00 },
|
|
|
|
|
{ 0x3f0d, 0x0a },
|
|
|
|
|
{ 0x3f14, 0x01 },
|
|
|
|
|
{ 0x3f3c, 0x01 },
|
|
|
|
|
{ 0x3f4d, 0x01 },
|
|
|
|
|
{ 0x3f4c, 0x01 },
|
|
|
|
|
{ 0x4254, 0x7f },
|
|
|
|
|
{ 0x0401, 0x00 },
|
|
|
|
|
{ 0x0404, 0x00 },
|
|
|
|
|
{ 0x0405, 0x10 },
|
|
|
|
|
{ 0x0408, 0x00 },
|
|
|
|
|
{ 0x0409, 0x00 },
|
|
|
|
|
{ 0x040a, 0x00 },
|
|
|
|
|
{ 0x040b, 0x00 },
|
|
|
|
|
{ 0x040c, 0x0c },
|
|
|
|
|
{ 0x040d, 0xd0 },
|
|
|
|
|
{ 0x040e, 0x09 },
|
|
|
|
|
{ 0x040f, 0xa0 },
|
|
|
|
|
{ 0x034c, 0x0c },
|
|
|
|
|
{ 0x034d, 0xd0 },
|
|
|
|
|
{ 0x034e, 0x09 },
|
|
|
|
|
{ 0x034f, 0xa0 },
|
|
|
|
|
{ 0x3261, 0x00 },
|
|
|
|
|
{ 0x3264, 0x00 },
|
|
|
|
|
{ 0x3265, 0x10 },
|
|
|
|
|
{ 0x0301, 0x05 },
|
|
|
|
|
{ 0x0303, 0x04 },
|
|
|
|
|
{ 0x0305, 0x04 },
|
|
|
|
|
{ 0x0306, 0x01 },
|
|
|
|
|
{ 0x0307, 0x92 },
|
|
|
|
|
{ 0x0309, 0x0a },
|
|
|
|
|
{ 0x030b, 0x02 },
|
|
|
|
|
{ 0x030d, 0x02 },
|
|
|
|
|
{ 0x030e, 0x00 },
|
|
|
|
|
{ 0x030f, 0xfa },
|
|
|
|
|
{ 0x0310, 0x00 },
|
|
|
|
|
{ 0x0820, 0x0f },
|
|
|
|
|
{ 0x0821, 0x13 },
|
|
|
|
|
{ 0x0822, 0x33 },
|
|
|
|
|
{ 0x0823, 0x33 },
|
|
|
|
|
{ 0x3e20, 0x01 },
|
|
|
|
|
{ 0x3e37, 0x00 },
|
|
|
|
|
{ 0x3e3b, 0x01 },
|
|
|
|
|
{ 0x38a3, 0x01 },
|
|
|
|
|
{ 0x38a8, 0x00 },
|
|
|
|
|
{ 0x38a9, 0x00 },
|
|
|
|
|
{ 0x38aa, 0x00 },
|
|
|
|
|
{ 0x38ab, 0x00 },
|
|
|
|
|
{ 0x3234, 0x00 },
|
|
|
|
|
{ 0x3fc1, 0x00 },
|
|
|
|
|
{ 0x3235, 0x00 },
|
|
|
|
|
{ 0x3802, 0x00 },
|
|
|
|
|
{ 0x3143, 0x04 },
|
|
|
|
|
{ 0x360a, 0x00 },
|
|
|
|
|
{ 0x0b00, 0x00 },
|
|
|
|
|
{ 0x0106, 0x00 },
|
|
|
|
|
{ 0x0b05, 0x01 },
|
|
|
|
|
{ 0x0b06, 0x01 },
|
|
|
|
|
{ 0x3230, 0x00 },
|
|
|
|
|
{ 0x3602, 0x01 },
|
|
|
|
|
{ 0x3607, 0x01 },
|
|
|
|
|
{ 0x3c00, 0x00 },
|
|
|
|
|
{ 0x3c01, 0x48 },
|
|
|
|
|
{ 0x3c02, 0xc8 },
|
|
|
|
|
{ 0x3c03, 0xaa },
|
|
|
|
|
{ 0x3c04, 0x91 },
|
|
|
|
|
{ 0x3c05, 0x54 },
|
|
|
|
|
{ 0x3c06, 0x26 },
|
|
|
|
|
{ 0x3c07, 0x20 },
|
|
|
|
|
{ 0x3c08, 0x51 },
|
|
|
|
|
{ 0x3d80, 0x00 },
|
|
|
|
|
{ 0x3f50, 0x00 },
|
|
|
|
|
{ 0x3f56, 0x00 },
|
|
|
|
|
{ 0x3f57, 0x30 },
|
|
|
|
|
{ 0x3f78, 0x01 },
|
|
|
|
|
{ 0x3f79, 0x18 },
|
|
|
|
|
{ 0x3f7c, 0x00 },
|
|
|
|
|
{ 0x3f7d, 0x00 },
|
|
|
|
|
{ 0x3fba, 0x00 },
|
|
|
|
|
{ 0x3fbb, 0x00 },
|
|
|
|
|
{ 0xa081, 0x00 },
|
|
|
|
|
{ 0xe014, 0x00 },
|
|
|
|
|
{ 0x0202, 0x0a },
|
|
|
|
|
{ 0x0203, 0x7a },
|
|
|
|
|
{ 0x0224, 0x01 },
|
|
|
|
|
{ 0x0225, 0xf4 },
|
|
|
|
|
{ 0x0204, 0x00 },
|
|
|
|
|
{ 0x0205, 0x00 },
|
|
|
|
|
{ 0x0216, 0x00 },
|
|
|
|
|
{ 0x0217, 0x00 },
|
|
|
|
|
{ 0x020e, 0x01 },
|
|
|
|
|
{ 0x020f, 0x00 },
|
|
|
|
|
{ 0x0210, 0x01 },
|
|
|
|
|
{ 0x0211, 0x00 },
|
|
|
|
|
{ 0x0212, 0x01 },
|
|
|
|
|
{ 0x0213, 0x00 },
|
|
|
|
|
{ 0x0214, 0x01 },
|
|
|
|
|
{ 0x0215, 0x00 },
|
|
|
|
|
{ 0x0218, 0x01 },
|
|
|
|
|
{ 0x0219, 0x00 },
|
|
|
|
|
{ 0x3614, 0x00 },
|
|
|
|
|
{ 0x3616, 0x0d },
|
|
|
|
|
{ 0x3617, 0x56 },
|
|
|
|
|
{ 0xb612, 0x20 },
|
|
|
|
|
{ 0xb613, 0x20 },
|
|
|
|
|
{ 0xb614, 0x20 },
|
|
|
|
|
{ 0xb615, 0x20 },
|
|
|
|
|
{ 0xb616, 0x0a },
|
|
|
|
|
{ 0xb617, 0x0a },
|
|
|
|
|
{ 0xb618, 0x20 },
|
|
|
|
|
{ 0xb619, 0x20 },
|
|
|
|
|
{ 0xb61a, 0x20 },
|
|
|
|
|
{ 0xb61b, 0x20 },
|
|
|
|
|
{ 0xb61c, 0x0a },
|
|
|
|
|
{ 0xb61d, 0x0a },
|
|
|
|
|
{ 0xb666, 0x30 },
|
|
|
|
|
{ 0xb667, 0x30 },
|
|
|
|
|
{ 0xb668, 0x30 },
|
|
|
|
|
{ 0xb669, 0x30 },
|
|
|
|
|
{ 0xb66a, 0x14 },
|
|
|
|
|
{ 0xb66b, 0x14 },
|
|
|
|
|
{ 0xb66c, 0x20 },
|
|
|
|
|
{ 0xb66d, 0x20 },
|
|
|
|
|
{ 0xb66e, 0x20 },
|
|
|
|
|
{ 0xb66f, 0x20 },
|
|
|
|
|
{ 0xb670, 0x10 },
|
|
|
|
|
{ 0xb671, 0x10 },
|
|
|
|
|
{ 0x3237, 0x00 },
|
|
|
|
|
{ 0x3900, 0x00 },
|
|
|
|
|
{ 0x3901, 0x00 },
|
|
|
|
|
{ 0x3902, 0x00 },
|
|
|
|
|
{ 0x3904, 0x00 },
|
|
|
|
|
{ 0x3905, 0x00 },
|
|
|
|
|
{ 0x3906, 0x00 },
|
|
|
|
|
{ 0x3907, 0x00 },
|
|
|
|
|
{ 0x3908, 0x00 },
|
|
|
|
|
{ 0x3909, 0x00 },
|
|
|
|
|
{ 0x3912, 0x00 },
|
|
|
|
|
{ 0x3930, 0x00 },
|
|
|
|
|
{ 0x3931, 0x00 },
|
|
|
|
|
{ 0x3933, 0x00 },
|
|
|
|
|
{ 0x3934, 0x00 },
|
|
|
|
|
{ 0x3935, 0x00 },
|
|
|
|
|
{ 0x3936, 0x00 },
|
|
|
|
|
{ 0x3937, 0x00 },
|
|
|
|
|
{ 0x30ac, 0x00 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct imx319_reg mode_1936x1096_regs[] = {
|
|
|
|
|
{ 0x0112, 0x0a },
|
|
|
|
|
{ 0x0113, 0x0a },
|
|
|
|
|
{ 0x0114, 0x03 },
|
|
|
|
|
{ 0x0342, 0x0f },
|
|
|
|
|
{ 0x0343, 0x80 },
|
|
|
|
|
{ 0x0340, 0x0c },
|
|
|
|
|
{ 0x0341, 0xaa },
|
|
|
|
|
{ 0x0344, 0x00 },
|
|
|
|
|
{ 0x0345, 0x00 },
|
|
|
|
|
{ 0x0346, 0x02 },
|
|
|
|
|
{ 0x0347, 0xac },
|
|
|
|
|
{ 0x0348, 0x0c },
|
|
|
|
|
{ 0x0349, 0xcf },
|
|
|
|
|
{ 0x034a, 0x06 },
|
|
|
|
|
{ 0x034b, 0xf3 },
|
|
|
|
|
{ 0x0220, 0x00 },
|
|
|
|
|
{ 0x0221, 0x11 },
|
|
|
|
|
{ 0x0381, 0x01 },
|
|
|
|
|
{ 0x0383, 0x01 },
|
|
|
|
|
{ 0x0385, 0x01 },
|
|
|
|
|
{ 0x0387, 0x01 },
|
|
|
|
|
{ 0x0900, 0x00 },
|
|
|
|
|
{ 0x0901, 0x11 },
|
|
|
|
|
{ 0x0902, 0x0a },
|
|
|
|
|
{ 0x3140, 0x02 },
|
|
|
|
|
{ 0x3141, 0x00 },
|
|
|
|
|
{ 0x3f0d, 0x0a },
|
|
|
|
|
{ 0x3f14, 0x01 },
|
|
|
|
|
{ 0x3f3c, 0x01 },
|
|
|
|
|
{ 0x3f4d, 0x01 },
|
|
|
|
|
{ 0x3f4c, 0x01 },
|
|
|
|
|
{ 0x4254, 0x7f },
|
|
|
|
|
{ 0x0401, 0x00 },
|
|
|
|
|
{ 0x0404, 0x00 },
|
|
|
|
|
{ 0x0405, 0x10 },
|
|
|
|
|
{ 0x0408, 0x02 },
|
|
|
|
|
{ 0x0409, 0xa0 },
|
|
|
|
|
{ 0x040a, 0x00 },
|
|
|
|
|
{ 0x040b, 0x00 },
|
|
|
|
|
{ 0x040c, 0x07 },
|
|
|
|
|
{ 0x040d, 0x90 },
|
|
|
|
|
{ 0x040e, 0x04 },
|
|
|
|
|
{ 0x040f, 0x48 },
|
|
|
|
|
{ 0x034c, 0x07 },
|
|
|
|
|
{ 0x034d, 0x90 },
|
|
|
|
|
{ 0x034e, 0x04 },
|
|
|
|
|
{ 0x034f, 0x48 },
|
|
|
|
|
{ 0x3261, 0x00 },
|
|
|
|
|
{ 0x3264, 0x00 },
|
|
|
|
|
{ 0x3265, 0x10 },
|
|
|
|
|
{ 0x0301, 0x05 },
|
|
|
|
|
{ 0x0303, 0x04 },
|
|
|
|
|
{ 0x0305, 0x04 },
|
|
|
|
|
{ 0x0306, 0x01 },
|
|
|
|
|
{ 0x0307, 0x92 },
|
|
|
|
|
{ 0x0309, 0x0a },
|
|
|
|
|
{ 0x030b, 0x02 },
|
|
|
|
|
{ 0x030d, 0x02 },
|
|
|
|
|
{ 0x030e, 0x00 },
|
|
|
|
|
{ 0x030f, 0xfa },
|
|
|
|
|
{ 0x0310, 0x00 },
|
|
|
|
|
{ 0x0820, 0x0f },
|
|
|
|
|
{ 0x0821, 0x13 },
|
|
|
|
|
{ 0x0822, 0x33 },
|
|
|
|
|
{ 0x0823, 0x33 },
|
|
|
|
|
{ 0x3e20, 0x01 },
|
|
|
|
|
{ 0x3e37, 0x00 },
|
|
|
|
|
{ 0x3e3b, 0x01 },
|
|
|
|
|
{ 0x38a3, 0x01 },
|
|
|
|
|
{ 0x38a8, 0x00 },
|
|
|
|
|
{ 0x38a9, 0x00 },
|
|
|
|
|
{ 0x38aa, 0x00 },
|
|
|
|
|
{ 0x38ab, 0x00 },
|
|
|
|
|
{ 0x3234, 0x00 },
|
|
|
|
|
{ 0x3fc1, 0x00 },
|
|
|
|
|
{ 0x3235, 0x00 },
|
|
|
|
|
{ 0x3802, 0x00 },
|
|
|
|
|
{ 0x3143, 0x04 },
|
|
|
|
|
{ 0x360a, 0x00 },
|
|
|
|
|
{ 0x0b00, 0x00 },
|
|
|
|
|
{ 0x0106, 0x00 },
|
|
|
|
|
{ 0x0b05, 0x01 },
|
|
|
|
|
{ 0x0b06, 0x01 },
|
|
|
|
|
{ 0x3230, 0x00 },
|
|
|
|
|
{ 0x3602, 0x01 },
|
|
|
|
|
{ 0x3607, 0x01 },
|
|
|
|
|
{ 0x3c00, 0x00 },
|
|
|
|
|
{ 0x3c01, 0x48 },
|
|
|
|
|
{ 0x3c02, 0xc8 },
|
|
|
|
|
{ 0x3c03, 0xaa },
|
|
|
|
|
{ 0x3c04, 0x91 },
|
|
|
|
|
{ 0x3c05, 0x54 },
|
|
|
|
|
{ 0x3c06, 0x26 },
|
|
|
|
|
{ 0x3c07, 0x20 },
|
|
|
|
|
{ 0x3c08, 0x51 },
|
|
|
|
|
{ 0x3d80, 0x00 },
|
|
|
|
|
{ 0x3f50, 0x00 },
|
|
|
|
|
{ 0x3f56, 0x00 },
|
|
|
|
|
{ 0x3f57, 0x30 },
|
|
|
|
|
{ 0x3f78, 0x01 },
|
|
|
|
|
{ 0x3f79, 0x18 },
|
|
|
|
|
{ 0x3f7c, 0x00 },
|
|
|
|
|
{ 0x3f7d, 0x00 },
|
|
|
|
|
{ 0x3fba, 0x00 },
|
|
|
|
|
{ 0x3fbb, 0x00 },
|
|
|
|
|
{ 0xa081, 0x00 },
|
|
|
|
|
{ 0xe014, 0x00 },
|
|
|
|
|
{ 0x0202, 0x05 },
|
|
|
|
|
{ 0x0203, 0x34 },
|
|
|
|
|
{ 0x0224, 0x01 },
|
|
|
|
|
{ 0x0225, 0xf4 },
|
|
|
|
|
{ 0x0204, 0x00 },
|
|
|
|
|
{ 0x0205, 0x00 },
|
|
|
|
|
{ 0x0216, 0x00 },
|
|
|
|
|
{ 0x0217, 0x00 },
|
|
|
|
|
{ 0x020e, 0x01 },
|
|
|
|
|
{ 0x020f, 0x00 },
|
|
|
|
|
{ 0x0210, 0x01 },
|
|
|
|
|
{ 0x0211, 0x00 },
|
|
|
|
|
{ 0x0212, 0x01 },
|
|
|
|
|
{ 0x0213, 0x00 },
|
|
|
|
|
{ 0x0214, 0x01 },
|
|
|
|
|
{ 0x0215, 0x00 },
|
|
|
|
|
{ 0x0218, 0x01 },
|
|
|
|
|
{ 0x0219, 0x00 },
|
|
|
|
|
{ 0x3614, 0x00 },
|
|
|
|
|
{ 0x3616, 0x0d },
|
|
|
|
|
{ 0x3617, 0x56 },
|
|
|
|
|
{ 0xb612, 0x20 },
|
|
|
|
|
{ 0xb613, 0x20 },
|
|
|
|
|
{ 0xb614, 0x20 },
|
|
|
|
|
{ 0xb615, 0x20 },
|
|
|
|
|
{ 0xb616, 0x0a },
|
|
|
|
|
{ 0xb617, 0x0a },
|
|
|
|
|
{ 0xb618, 0x20 },
|
|
|
|
|
{ 0xb619, 0x20 },
|
|
|
|
|
{ 0xb61a, 0x20 },
|
|
|
|
|
{ 0xb61b, 0x20 },
|
|
|
|
|
{ 0xb61c, 0x0a },
|
|
|
|
|
{ 0xb61d, 0x0a },
|
|
|
|
|
{ 0xb666, 0x30 },
|
|
|
|
|
{ 0xb667, 0x30 },
|
|
|
|
|
{ 0xb668, 0x30 },
|
|
|
|
|
{ 0xb669, 0x30 },
|
|
|
|
|
{ 0xb66a, 0x14 },
|
|
|
|
|
{ 0xb66b, 0x14 },
|
|
|
|
|
{ 0xb66c, 0x20 },
|
|
|
|
|
{ 0xb66d, 0x20 },
|
|
|
|
|
{ 0xb66e, 0x20 },
|
|
|
|
|
{ 0xb66f, 0x20 },
|
|
|
|
|
{ 0xb670, 0x10 },
|
|
|
|
|
{ 0xb671, 0x10 },
|
|
|
|
|
{ 0x3237, 0x00 },
|
|
|
|
|
{ 0x3900, 0x00 },
|
|
|
|
|
{ 0x3901, 0x00 },
|
|
|
|
|
{ 0x3902, 0x00 },
|
|
|
|
|
{ 0x3904, 0x00 },
|
|
|
|
|
{ 0x3905, 0x00 },
|
|
|
|
|
{ 0x3906, 0x00 },
|
|
|
|
|
{ 0x3907, 0x00 },
|
|
|
|
|
{ 0x3908, 0x00 },
|
|
|
|
|
{ 0x3909, 0x00 },
|
|
|
|
|
{ 0x3912, 0x00 },
|
|
|
|
|
{ 0x3930, 0x00 },
|
|
|
|
|
{ 0x3931, 0x00 },
|
|
|
|
|
{ 0x3933, 0x00 },
|
|
|
|
|
{ 0x3934, 0x00 },
|
|
|
|
|
{ 0x3935, 0x00 },
|
|
|
|
|
{ 0x3936, 0x00 },
|
|
|
|
|
{ 0x3937, 0x00 },
|
|
|
|
|
{ 0x30ac, 0x00 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct imx319_reg mode_1920x1080_regs[] = {
|
|
|
|
|
{ 0x0112, 0x0a },
|
|
|
|
|
{ 0x0113, 0x0a },
|
|
|
|
|
{ 0x0114, 0x03 },
|
|
|
|
|
{ 0x0342, 0x0f },
|
|
|
|
|
{ 0x0343, 0x80 },
|
|
|
|
|
{ 0x0340, 0x0c },
|
|
|
|
|
{ 0x0341, 0xaa },
|
|
|
|
|
{ 0x0344, 0x00 },
|
|
|
|
|
{ 0x0345, 0x00 },
|
|
|
|
|
{ 0x0346, 0x02 },
|
|
|
|
|
{ 0x0347, 0xb4 },
|
|
|
|
|
{ 0x0348, 0x0c },
|
|
|
|
|
{ 0x0349, 0xcf },
|
|
|
|
|
{ 0x034a, 0x06 },
|
|
|
|
|
{ 0x034b, 0xeb },
|
|
|
|
|
{ 0x0220, 0x00 },
|
|
|
|
|
{ 0x0221, 0x11 },
|
|
|
|
|
{ 0x0381, 0x01 },
|
|
|
|
|
{ 0x0383, 0x01 },
|
|
|
|
|
{ 0x0385, 0x01 },
|
|
|
|
|
{ 0x0387, 0x01 },
|
|
|
|
|
{ 0x0900, 0x00 },
|
|
|
|
|
{ 0x0901, 0x11 },
|
|
|
|
|
{ 0x0902, 0x0a },
|
|
|
|
|
{ 0x3140, 0x02 },
|
|
|
|
|
{ 0x3141, 0x00 },
|
|
|
|
|
{ 0x3f0d, 0x0a },
|
|
|
|
|
{ 0x3f14, 0x01 },
|
|
|
|
|
{ 0x3f3c, 0x01 },
|
|
|
|
|
{ 0x3f4d, 0x01 },
|
|
|
|
|
{ 0x3f4c, 0x01 },
|
|
|
|
|
{ 0x4254, 0x7f },
|
|
|
|
|
{ 0x0401, 0x00 },
|
|
|
|
|
{ 0x0404, 0x00 },
|
|
|
|
|
{ 0x0405, 0x10 },
|
|
|
|
|
{ 0x0408, 0x02 },
|
|
|
|
|
{ 0x0409, 0xa8 },
|
|
|
|
|
{ 0x040a, 0x00 },
|
|
|
|
|
{ 0x040b, 0x00 },
|
|
|
|
|
{ 0x040c, 0x07 },
|
|
|
|
|
{ 0x040d, 0x80 },
|
|
|
|
|
{ 0x040e, 0x04 },
|
|
|
|
|
{ 0x040f, 0x38 },
|
|
|
|
|
{ 0x034c, 0x07 },
|
|
|
|
|
{ 0x034d, 0x80 },
|
|
|
|
|
{ 0x034e, 0x04 },
|
|
|
|
|
{ 0x034f, 0x38 },
|
|
|
|
|
{ 0x3261, 0x00 },
|
|
|
|
|
{ 0x3264, 0x00 },
|
|
|
|
|
{ 0x3265, 0x10 },
|
|
|
|
|
{ 0x0301, 0x05 },
|
|
|
|
|
{ 0x0303, 0x04 },
|
|
|
|
|
{ 0x0305, 0x04 },
|
|
|
|
|
{ 0x0306, 0x01 },
|
|
|
|
|
{ 0x0307, 0x92 },
|
|
|
|
|
{ 0x0309, 0x0a },
|
|
|
|
|
{ 0x030b, 0x02 },
|
|
|
|
|
{ 0x030d, 0x02 },
|
|
|
|
|
{ 0x030e, 0x00 },
|
|
|
|
|
{ 0x030f, 0xfa },
|
|
|
|
|
{ 0x0310, 0x00 },
|
|
|
|
|
{ 0x0820, 0x0f },
|
|
|
|
|
{ 0x0821, 0x13 },
|
|
|
|
|
{ 0x0822, 0x33 },
|
|
|
|
|
{ 0x0823, 0x33 },
|
|
|
|
|
{ 0x3e20, 0x01 },
|
|
|
|
|
{ 0x3e37, 0x00 },
|
|
|
|
|
{ 0x3e3b, 0x01 },
|
|
|
|
|
{ 0x38a3, 0x01 },
|
|
|
|
|
{ 0x38a8, 0x00 },
|
|
|
|
|
{ 0x38a9, 0x00 },
|
|
|
|
|
{ 0x38aa, 0x00 },
|
|
|
|
|
{ 0x38ab, 0x00 },
|
|
|
|
|
{ 0x3234, 0x00 },
|
|
|
|
|
{ 0x3fc1, 0x00 },
|
|
|
|
|
{ 0x3235, 0x00 },
|
|
|
|
|
{ 0x3802, 0x00 },
|
|
|
|
|
{ 0x3143, 0x04 },
|
|
|
|
|
{ 0x360a, 0x00 },
|
|
|
|
|
{ 0x0b00, 0x00 },
|
|
|
|
|
{ 0x0106, 0x00 },
|
|
|
|
|
{ 0x0b05, 0x01 },
|
|
|
|
|
{ 0x0b06, 0x01 },
|
|
|
|
|
{ 0x3230, 0x00 },
|
|
|
|
|
{ 0x3602, 0x01 },
|
|
|
|
|
{ 0x3607, 0x01 },
|
|
|
|
|
{ 0x3c00, 0x00 },
|
|
|
|
|
{ 0x3c01, 0x48 },
|
|
|
|
|
{ 0x3c02, 0xc8 },
|
|
|
|
|
{ 0x3c03, 0xaa },
|
|
|
|
|
{ 0x3c04, 0x91 },
|
|
|
|
|
{ 0x3c05, 0x54 },
|
|
|
|
|
{ 0x3c06, 0x26 },
|
|
|
|
|
{ 0x3c07, 0x20 },
|
|
|
|
|
{ 0x3c08, 0x51 },
|
|
|
|
|
{ 0x3d80, 0x00 },
|
|
|
|
|
{ 0x3f50, 0x00 },
|
|
|
|
|
{ 0x3f56, 0x00 },
|
|
|
|
|
{ 0x3f57, 0x30 },
|
|
|
|
|
{ 0x3f78, 0x01 },
|
|
|
|
|
{ 0x3f79, 0x18 },
|
|
|
|
|
{ 0x3f7c, 0x00 },
|
|
|
|
|
{ 0x3f7d, 0x00 },
|
|
|
|
|
{ 0x3fba, 0x00 },
|
|
|
|
|
{ 0x3fbb, 0x00 },
|
|
|
|
|
{ 0xa081, 0x00 },
|
|
|
|
|
{ 0xe014, 0x00 },
|
|
|
|
|
{ 0x0202, 0x05 },
|
|
|
|
|
{ 0x0203, 0x34 },
|
|
|
|
|
{ 0x0224, 0x01 },
|
|
|
|
|
{ 0x0225, 0xf4 },
|
|
|
|
|
{ 0x0204, 0x00 },
|
|
|
|
|
{ 0x0205, 0x00 },
|
|
|
|
|
{ 0x0216, 0x00 },
|
|
|
|
|
{ 0x0217, 0x00 },
|
|
|
|
|
{ 0x020e, 0x01 },
|
|
|
|
|
{ 0x020f, 0x00 },
|
|
|
|
|
{ 0x0210, 0x01 },
|
|
|
|
|
{ 0x0211, 0x00 },
|
|
|
|
|
{ 0x0212, 0x01 },
|
|
|
|
|
{ 0x0213, 0x00 },
|
|
|
|
|
{ 0x0214, 0x01 },
|
|
|
|
|
{ 0x0215, 0x00 },
|
|
|
|
|
{ 0x0218, 0x01 },
|
|
|
|
|
{ 0x0219, 0x00 },
|
|
|
|
|
{ 0x3614, 0x00 },
|
|
|
|
|
{ 0x3616, 0x0d },
|
|
|
|
|
{ 0x3617, 0x56 },
|
|
|
|
|
{ 0xb612, 0x20 },
|
|
|
|
|
{ 0xb613, 0x20 },
|
|
|
|
|
{ 0xb614, 0x20 },
|
|
|
|
|
{ 0xb615, 0x20 },
|
|
|
|
|
{ 0xb616, 0x0a },
|
|
|
|
|
{ 0xb617, 0x0a },
|
|
|
|
|
{ 0xb618, 0x20 },
|
|
|
|
|
{ 0xb619, 0x20 },
|
|
|
|
|
{ 0xb61a, 0x20 },
|
|
|
|
|
{ 0xb61b, 0x20 },
|
|
|
|
|
{ 0xb61c, 0x0a },
|
|
|
|
|
{ 0xb61d, 0x0a },
|
|
|
|
|
{ 0xb666, 0x30 },
|
|
|
|
|
{ 0xb667, 0x30 },
|
|
|
|
|
{ 0xb668, 0x30 },
|
|
|
|
|
{ 0xb669, 0x30 },
|
|
|
|
|
{ 0xb66a, 0x14 },
|
|
|
|
|
{ 0xb66b, 0x14 },
|
|
|
|
|
{ 0xb66c, 0x20 },
|
|
|
|
|
{ 0xb66d, 0x20 },
|
|
|
|
|
{ 0xb66e, 0x20 },
|
|
|
|
|
{ 0xb66f, 0x20 },
|
|
|
|
|
{ 0xb670, 0x10 },
|
|
|
|
|
{ 0xb671, 0x10 },
|
|
|
|
|
{ 0x3237, 0x00 },
|
|
|
|
|
{ 0x3900, 0x00 },
|
|
|
|
|
{ 0x3901, 0x00 },
|
|
|
|
|
{ 0x3902, 0x00 },
|
|
|
|
|
{ 0x3904, 0x00 },
|
|
|
|
|
{ 0x3905, 0x00 },
|
|
|
|
|
{ 0x3906, 0x00 },
|
|
|
|
|
{ 0x3907, 0x00 },
|
|
|
|
|
{ 0x3908, 0x00 },
|
|
|
|
|
{ 0x3909, 0x00 },
|
|
|
|
|
{ 0x3912, 0x00 },
|
|
|
|
|
{ 0x3930, 0x00 },
|
|
|
|
|
{ 0x3931, 0x00 },
|
|
|
|
|
{ 0x3933, 0x00 },
|
|
|
|
|
{ 0x3934, 0x00 },
|
|
|
|
|
{ 0x3935, 0x00 },
|
|
|
|
|
{ 0x3936, 0x00 },
|
|
|
|
|
{ 0x3937, 0x00 },
|
|
|
|
|
{ 0x30ac, 0x00 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct imx319_reg mode_1640x1232_regs[] = {
|
|
|
|
|
{ 0x0112, 0x0a },
|
|
|
|
|
{ 0x0113, 0x0a },
|
|
|
|
|
{ 0x0114, 0x03 },
|
|
|
|
|
{ 0x0342, 0x08 },
|
|
|
|
|
{ 0x0343, 0x20 },
|
|
|
|
|
{ 0x0340, 0x18 },
|
|
|
|
|
{ 0x0341, 0x2a },
|
|
|
|
|
{ 0x0344, 0x00 },
|
|
|
|
|
{ 0x0345, 0x00 },
|
|
|
|
|
{ 0x0346, 0x00 },
|
|
|
|
|
{ 0x0347, 0x00 },
|
|
|
|
|
{ 0x0348, 0x0c },
|
|
|
|
|
{ 0x0349, 0xcf },
|
|
|
|
|
{ 0x034a, 0x09 },
|
|
|
|
|
{ 0x034b, 0x9f },
|
|
|
|
|
{ 0x0220, 0x00 },
|
|
|
|
|
{ 0x0221, 0x11 },
|
|
|
|
|
{ 0x0381, 0x01 },
|
|
|
|
|
{ 0x0383, 0x01 },
|
|
|
|
|
{ 0x0385, 0x01 },
|
|
|
|
|
{ 0x0387, 0x01 },
|
|
|
|
|
{ 0x0900, 0x01 },
|
|
|
|
|
{ 0x0901, 0x22 },
|
|
|
|
|
{ 0x0902, 0x0a },
|
|
|
|
|
{ 0x3140, 0x02 },
|
|
|
|
|
{ 0x3141, 0x00 },
|
|
|
|
|
{ 0x3f0d, 0x0a },
|
|
|
|
|
{ 0x3f14, 0x01 },
|
|
|
|
|
{ 0x3f3c, 0x02 },
|
|
|
|
|
{ 0x3f4d, 0x01 },
|
|
|
|
|
{ 0x3f4c, 0x01 },
|
|
|
|
|
{ 0x4254, 0x7f },
|
|
|
|
|
{ 0x0401, 0x00 },
|
|
|
|
|
{ 0x0404, 0x00 },
|
|
|
|
|
{ 0x0405, 0x10 },
|
|
|
|
|
{ 0x0408, 0x00 },
|
|
|
|
|
{ 0x0409, 0x00 },
|
|
|
|
|
{ 0x040a, 0x00 },
|
|
|
|
|
{ 0x040b, 0x00 },
|
|
|
|
|
{ 0x040c, 0x06 },
|
|
|
|
|
{ 0x040d, 0x68 },
|
|
|
|
|
{ 0x040e, 0x04 },
|
|
|
|
|
{ 0x040f, 0xd0 },
|
|
|
|
|
{ 0x034c, 0x06 },
|
|
|
|
|
{ 0x034d, 0x68 },
|
|
|
|
|
{ 0x034e, 0x04 },
|
|
|
|
|
{ 0x034f, 0xd0 },
|
|
|
|
|
{ 0x3261, 0x00 },
|
|
|
|
|
{ 0x3264, 0x00 },
|
|
|
|
|
{ 0x3265, 0x10 },
|
|
|
|
|
{ 0x0301, 0x05 },
|
|
|
|
|
{ 0x0303, 0x04 },
|
|
|
|
|
{ 0x0305, 0x04 },
|
|
|
|
|
{ 0x0306, 0x01 },
|
|
|
|
|
{ 0x0307, 0x92 },
|
|
|
|
|
{ 0x0309, 0x0a },
|
|
|
|
|
{ 0x030b, 0x02 },
|
|
|
|
|
{ 0x030d, 0x02 },
|
|
|
|
|
{ 0x030e, 0x00 },
|
|
|
|
|
{ 0x030f, 0xfa },
|
|
|
|
|
{ 0x0310, 0x00 },
|
|
|
|
|
{ 0x0820, 0x0f },
|
|
|
|
|
{ 0x0821, 0x13 },
|
|
|
|
|
{ 0x0822, 0x33 },
|
|
|
|
|
{ 0x0823, 0x33 },
|
|
|
|
|
{ 0x3e20, 0x01 },
|
|
|
|
|
{ 0x3e37, 0x00 },
|
|
|
|
|
{ 0x3e3b, 0x01 },
|
|
|
|
|
{ 0x38a3, 0x01 },
|
|
|
|
|
{ 0x38a8, 0x00 },
|
|
|
|
|
{ 0x38a9, 0x00 },
|
|
|
|
|
{ 0x38aa, 0x00 },
|
|
|
|
|
{ 0x38ab, 0x00 },
|
|
|
|
|
{ 0x3234, 0x00 },
|
|
|
|
|
{ 0x3fc1, 0x00 },
|
|
|
|
|
{ 0x3235, 0x00 },
|
|
|
|
|
{ 0x3802, 0x00 },
|
|
|
|
|
{ 0x3143, 0x04 },
|
|
|
|
|
{ 0x360a, 0x00 },
|
|
|
|
|
{ 0x0b00, 0x00 },
|
|
|
|
|
{ 0x0106, 0x00 },
|
|
|
|
|
{ 0x0b05, 0x01 },
|
|
|
|
|
{ 0x0b06, 0x01 },
|
|
|
|
|
{ 0x3230, 0x00 },
|
|
|
|
|
{ 0x3602, 0x01 },
|
|
|
|
|
{ 0x3607, 0x01 },
|
|
|
|
|
{ 0x3c00, 0x00 },
|
|
|
|
|
{ 0x3c01, 0xba },
|
|
|
|
|
{ 0x3c02, 0xc8 },
|
|
|
|
|
{ 0x3c03, 0xaa },
|
|
|
|
|
{ 0x3c04, 0x91 },
|
|
|
|
|
{ 0x3c05, 0x54 },
|
|
|
|
|
{ 0x3c06, 0x26 },
|
|
|
|
|
{ 0x3c07, 0x20 },
|
|
|
|
|
{ 0x3c08, 0x51 },
|
|
|
|
|
{ 0x3d80, 0x00 },
|
|
|
|
|
{ 0x3f50, 0x00 },
|
|
|
|
|
{ 0x3f56, 0x00 },
|
|
|
|
|
{ 0x3f57, 0x30 },
|
|
|
|
|
{ 0x3f78, 0x00 },
|
|
|
|
|
{ 0x3f79, 0x34 },
|
|
|
|
|
{ 0x3f7c, 0x00 },
|
|
|
|
|
{ 0x3f7d, 0x00 },
|
|
|
|
|
{ 0x3fba, 0x00 },
|
|
|
|
|
{ 0x3fbb, 0x00 },
|
|
|
|
|
{ 0xa081, 0x04 },
|
|
|
|
|
{ 0xe014, 0x00 },
|
|
|
|
|
{ 0x0202, 0x04 },
|
|
|
|
|
{ 0x0203, 0xf6 },
|
|
|
|
|
{ 0x0224, 0x01 },
|
|
|
|
|
{ 0x0225, 0xf4 },
|
|
|
|
|
{ 0x0204, 0x00 },
|
|
|
|
|
{ 0x0205, 0x00 },
|
|
|
|
|
{ 0x0216, 0x00 },
|
|
|
|
|
{ 0x0217, 0x00 },
|
|
|
|
|
{ 0x020e, 0x01 },
|
|
|
|
|
{ 0x020f, 0x00 },
|
|
|
|
|
{ 0x0210, 0x01 },
|
|
|
|
|
{ 0x0211, 0x00 },
|
|
|
|
|
{ 0x0212, 0x01 },
|
|
|
|
|
{ 0x0213, 0x00 },
|
|
|
|
|
{ 0x0214, 0x01 },
|
|
|
|
|
{ 0x0215, 0x00 },
|
|
|
|
|
{ 0x0218, 0x01 },
|
|
|
|
|
{ 0x0219, 0x00 },
|
|
|
|
|
{ 0x3614, 0x00 },
|
|
|
|
|
{ 0x3616, 0x0d },
|
|
|
|
|
{ 0x3617, 0x56 },
|
|
|
|
|
{ 0xb612, 0x20 },
|
|
|
|
|
{ 0xb613, 0x20 },
|
|
|
|
|
{ 0xb614, 0x20 },
|
|
|
|
|
{ 0xb615, 0x20 },
|
|
|
|
|
{ 0xb616, 0x0a },
|
|
|
|
|
{ 0xb617, 0x0a },
|
|
|
|
|
{ 0xb618, 0x20 },
|
|
|
|
|
{ 0xb619, 0x20 },
|
|
|
|
|
{ 0xb61a, 0x20 },
|
|
|
|
|
{ 0xb61b, 0x20 },
|
|
|
|
|
{ 0xb61c, 0x0a },
|
|
|
|
|
{ 0xb61d, 0x0a },
|
|
|
|
|
{ 0xb666, 0x30 },
|
|
|
|
|
{ 0xb667, 0x30 },
|
|
|
|
|
{ 0xb668, 0x30 },
|
|
|
|
|
{ 0xb669, 0x30 },
|
|
|
|
|
{ 0xb66a, 0x14 },
|
|
|
|
|
{ 0xb66b, 0x14 },
|
|
|
|
|
{ 0xb66c, 0x20 },
|
|
|
|
|
{ 0xb66d, 0x20 },
|
|
|
|
|
{ 0xb66e, 0x20 },
|
|
|
|
|
{ 0xb66f, 0x20 },
|
|
|
|
|
{ 0xb670, 0x10 },
|
|
|
|
|
{ 0xb671, 0x10 },
|
|
|
|
|
{ 0x3237, 0x00 },
|
|
|
|
|
{ 0x3900, 0x00 },
|
|
|
|
|
{ 0x3901, 0x00 },
|
|
|
|
|
{ 0x3902, 0x00 },
|
|
|
|
|
{ 0x3904, 0x00 },
|
|
|
|
|
{ 0x3905, 0x00 },
|
|
|
|
|
{ 0x3906, 0x00 },
|
|
|
|
|
{ 0x3907, 0x00 },
|
|
|
|
|
{ 0x3908, 0x00 },
|
|
|
|
|
{ 0x3909, 0x00 },
|
|
|
|
|
{ 0x3912, 0x00 },
|
|
|
|
|
{ 0x3930, 0x00 },
|
|
|
|
|
{ 0x3931, 0x00 },
|
|
|
|
|
{ 0x3933, 0x00 },
|
|
|
|
|
{ 0x3934, 0x00 },
|
|
|
|
|
{ 0x3935, 0x00 },
|
|
|
|
|
{ 0x3936, 0x00 },
|
|
|
|
|
{ 0x3937, 0x00 },
|
|
|
|
|
{ 0x30ac, 0x00 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct imx319_reg mode_1640x922_regs[] = {
|
|
|
|
|
{ 0x0112, 0x0a },
|
|
|
|
|
{ 0x0113, 0x0a },
|
|
|
|
|
{ 0x0114, 0x03 },
|
|
|
|
|
{ 0x0342, 0x08 },
|
|
|
|
|
{ 0x0343, 0x20 },
|
|
|
|
|
{ 0x0340, 0x18 },
|
|
|
|
|
{ 0x0341, 0x2a },
|
|
|
|
|
{ 0x0344, 0x00 },
|
|
|
|
|
{ 0x0345, 0x00 },
|
|
|
|
|
{ 0x0346, 0x01 },
|
|
|
|
|
{ 0x0347, 0x30 },
|
|
|
|
|
{ 0x0348, 0x0c },
|
|
|
|
|
{ 0x0349, 0xcf },
|
|
|
|
|
{ 0x034a, 0x08 },
|
|
|
|
|
{ 0x034b, 0x6f },
|
|
|
|
|
{ 0x0220, 0x00 },
|
|
|
|
|
{ 0x0221, 0x11 },
|
|
|
|
|
{ 0x0381, 0x01 },
|
|
|
|
|
{ 0x0383, 0x01 },
|
|
|
|
|
{ 0x0385, 0x01 },
|
|
|
|
|
{ 0x0387, 0x01 },
|
|
|
|
|
{ 0x0900, 0x01 },
|
|
|
|
|
{ 0x0901, 0x22 },
|
|
|
|
|
{ 0x0902, 0x0a },
|
|
|
|
|
{ 0x3140, 0x02 },
|
|
|
|
|
{ 0x3141, 0x00 },
|
|
|
|
|
{ 0x3f0d, 0x0a },
|
|
|
|
|
{ 0x3f14, 0x01 },
|
|
|
|
|
{ 0x3f3c, 0x02 },
|
|
|
|
|
{ 0x3f4d, 0x01 },
|
|
|
|
|
{ 0x3f4c, 0x01 },
|
|
|
|
|
{ 0x4254, 0x7f },
|
|
|
|
|
{ 0x0401, 0x00 },
|
|
|
|
|
{ 0x0404, 0x00 },
|
|
|
|
|
{ 0x0405, 0x10 },
|
|
|
|
|
{ 0x0408, 0x00 },
|
|
|
|
|
{ 0x0409, 0x00 },
|
|
|
|
|
{ 0x040a, 0x00 },
|
|
|
|
|
{ 0x040b, 0x02 },
|
|
|
|
|
{ 0x040c, 0x06 },
|
|
|
|
|
{ 0x040d, 0x68 },
|
|
|
|
|
{ 0x040e, 0x03 },
|
|
|
|
|
{ 0x040f, 0x9a },
|
|
|
|
|
{ 0x034c, 0x06 },
|
|
|
|
|
{ 0x034d, 0x68 },
|
|
|
|
|
{ 0x034e, 0x03 },
|
|
|
|
|
{ 0x034f, 0x9a },
|
|
|
|
|
{ 0x3261, 0x00 },
|
|
|
|
|
{ 0x3264, 0x00 },
|
|
|
|
|
{ 0x3265, 0x10 },
|
|
|
|
|
{ 0x0301, 0x05 },
|
|
|
|
|
{ 0x0303, 0x04 },
|
|
|
|
|
{ 0x0305, 0x04 },
|
|
|
|
|
{ 0x0306, 0x01 },
|
|
|
|
|
{ 0x0307, 0x92 },
|
|
|
|
|
{ 0x0309, 0x0a },
|
|
|
|
|
{ 0x030b, 0x02 },
|
|
|
|
|
{ 0x030d, 0x02 },
|
|
|
|
|
{ 0x030e, 0x00 },
|
|
|
|
|
{ 0x030f, 0xfa },
|
|
|
|
|
{ 0x0310, 0x00 },
|
|
|
|
|
{ 0x0820, 0x0f },
|
|
|
|
|
{ 0x0821, 0x13 },
|
|
|
|
|
{ 0x0822, 0x33 },
|
|
|
|
|
{ 0x0823, 0x33 },
|
|
|
|
|
{ 0x3e20, 0x01 },
|
|
|
|
|
{ 0x3e37, 0x00 },
|
|
|
|
|
{ 0x3e3b, 0x01 },
|
|
|
|
|
{ 0x38a3, 0x01 },
|
|
|
|
|
{ 0x38a8, 0x00 },
|
|
|
|
|
{ 0x38a9, 0x00 },
|
|
|
|
|
{ 0x38aa, 0x00 },
|
|
|
|
|
{ 0x38ab, 0x00 },
|
|
|
|
|
{ 0x3234, 0x00 },
|
|
|
|
|
{ 0x3fc1, 0x00 },
|
|
|
|
|
{ 0x3235, 0x00 },
|
|
|
|
|
{ 0x3802, 0x00 },
|
|
|
|
|
{ 0x3143, 0x04 },
|
|
|
|
|
{ 0x360a, 0x00 },
|
|
|
|
|
{ 0x0b00, 0x00 },
|
|
|
|
|
{ 0x0106, 0x00 },
|
|
|
|
|
{ 0x0b05, 0x01 },
|
|
|
|
|
{ 0x0b06, 0x01 },
|
|
|
|
|
{ 0x3230, 0x00 },
|
|
|
|
|
{ 0x3602, 0x01 },
|
|
|
|
|
{ 0x3607, 0x01 },
|
|
|
|
|
{ 0x3c00, 0x00 },
|
|
|
|
|
{ 0x3c01, 0xba },
|
|
|
|
|
{ 0x3c02, 0xc8 },
|
|
|
|
|
{ 0x3c03, 0xaa },
|
|
|
|
|
{ 0x3c04, 0x91 },
|
|
|
|
|
{ 0x3c05, 0x54 },
|
|
|
|
|
{ 0x3c06, 0x26 },
|
|
|
|
|
{ 0x3c07, 0x20 },
|
|
|
|
|
{ 0x3c08, 0x51 },
|
|
|
|
|
{ 0x3d80, 0x00 },
|
|
|
|
|
{ 0x3f50, 0x00 },
|
|
|
|
|
{ 0x3f56, 0x00 },
|
|
|
|
|
{ 0x3f57, 0x30 },
|
|
|
|
|
{ 0x3f78, 0x00 },
|
|
|
|
|
{ 0x3f79, 0x34 },
|
|
|
|
|
{ 0x3f7c, 0x00 },
|
|
|
|
|
{ 0x3f7d, 0x00 },
|
|
|
|
|
{ 0x3fba, 0x00 },
|
|
|
|
|
{ 0x3fbb, 0x00 },
|
|
|
|
|
{ 0xa081, 0x04 },
|
|
|
|
|
{ 0xe014, 0x00 },
|
|
|
|
|
{ 0x0202, 0x04 },
|
|
|
|
|
{ 0x0203, 0xf6 },
|
|
|
|
|
{ 0x0224, 0x01 },
|
|
|
|
|
{ 0x0225, 0xf4 },
|
|
|
|
|
{ 0x0204, 0x00 },
|
|
|
|
|
{ 0x0205, 0x00 },
|
|
|
|
|
{ 0x0216, 0x00 },
|
|
|
|
|
{ 0x0217, 0x00 },
|
|
|
|
|
{ 0x020e, 0x01 },
|
|
|
|
|
{ 0x020f, 0x00 },
|
|
|
|
|
{ 0x0210, 0x01 },
|
|
|
|
|
{ 0x0211, 0x00 },
|
|
|
|
|
{ 0x0212, 0x01 },
|
|
|
|
|
{ 0x0213, 0x00 },
|
|
|
|
|
{ 0x0214, 0x01 },
|
|
|
|
|
{ 0x0215, 0x00 },
|
|
|
|
|
{ 0x0218, 0x01 },
|
|
|
|
|
{ 0x0219, 0x00 },
|
|
|
|
|
{ 0x3614, 0x00 },
|
|
|
|
|
{ 0x3616, 0x0d },
|
|
|
|
|
{ 0x3617, 0x56 },
|
|
|
|
|
{ 0xb612, 0x20 },
|
|
|
|
|
{ 0xb613, 0x20 },
|
|
|
|
|
{ 0xb614, 0x20 },
|
|
|
|
|
{ 0xb615, 0x20 },
|
|
|
|
|
{ 0xb616, 0x0a },
|
|
|
|
|
{ 0xb617, 0x0a },
|
|
|
|
|
{ 0xb618, 0x20 },
|
|
|
|
|
{ 0xb619, 0x20 },
|
|
|
|
|
{ 0xb61a, 0x20 },
|
|
|
|
|
{ 0xb61b, 0x20 },
|
|
|
|
|
{ 0xb61c, 0x0a },
|
|
|
|
|
{ 0xb61d, 0x0a },
|
|
|
|
|
{ 0xb666, 0x30 },
|
|
|
|
|
{ 0xb667, 0x30 },
|
|
|
|
|
{ 0xb668, 0x30 },
|
|
|
|
|
{ 0xb669, 0x30 },
|
|
|
|
|
{ 0xb66a, 0x14 },
|
|
|
|
|
{ 0xb66b, 0x14 },
|
|
|
|
|
{ 0xb66c, 0x20 },
|
|
|
|
|
{ 0xb66d, 0x20 },
|
|
|
|
|
{ 0xb66e, 0x20 },
|
|
|
|
|
{ 0xb66f, 0x20 },
|
|
|
|
|
{ 0xb670, 0x10 },
|
|
|
|
|
{ 0xb671, 0x10 },
|
|
|
|
|
{ 0x3237, 0x00 },
|
|
|
|
|
{ 0x3900, 0x00 },
|
|
|
|
|
{ 0x3901, 0x00 },
|
|
|
|
|
{ 0x3902, 0x00 },
|
|
|
|
|
{ 0x3904, 0x00 },
|
|
|
|
|
{ 0x3905, 0x00 },
|
|
|
|
|
{ 0x3906, 0x00 },
|
|
|
|
|
{ 0x3907, 0x00 },
|
|
|
|
|
{ 0x3908, 0x00 },
|
|
|
|
|
{ 0x3909, 0x00 },
|
|
|
|
|
{ 0x3912, 0x00 },
|
|
|
|
|
{ 0x3930, 0x00 },
|
|
|
|
|
{ 0x3931, 0x00 },
|
|
|
|
|
{ 0x3933, 0x00 },
|
|
|
|
|
{ 0x3934, 0x00 },
|
|
|
|
|
{ 0x3935, 0x00 },
|
|
|
|
|
{ 0x3936, 0x00 },
|
|
|
|
|
{ 0x3937, 0x00 },
|
|
|
|
|
{ 0x30ac, 0x00 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct imx319_reg mode_1296x736_regs[] = {
|
|
|
|
|
{ 0x0112, 0x0a },
|
|
|
|
|
{ 0x0113, 0x0a },
|
|
|
|
|
{ 0x0114, 0x03 },
|
|
|
|
|
{ 0x0342, 0x08 },
|
|
|
|
|
{ 0x0343, 0x20 },
|
|
|
|
|
{ 0x0340, 0x18 },
|
|
|
|
|
{ 0x0341, 0x2a },
|
|
|
|
|
{ 0x0344, 0x00 },
|
|
|
|
|
{ 0x0345, 0x00 },
|
|
|
|
|
{ 0x0346, 0x01 },
|
|
|
|
|
{ 0x0347, 0xf0 },
|
|
|
|
|
{ 0x0348, 0x0c },
|
|
|
|
|
{ 0x0349, 0xcf },
|
|
|
|
|
{ 0x034a, 0x07 },
|
|
|
|
|
{ 0x034b, 0xaf },
|
|
|
|
|
{ 0x0220, 0x00 },
|
|
|
|
|
{ 0x0221, 0x11 },
|
|
|
|
|
{ 0x0381, 0x01 },
|
|
|
|
|
{ 0x0383, 0x01 },
|
|
|
|
|
{ 0x0385, 0x01 },
|
|
|
|
|
{ 0x0387, 0x01 },
|
|
|
|
|
{ 0x0900, 0x01 },
|
|
|
|
|
{ 0x0901, 0x22 },
|
|
|
|
|
{ 0x0902, 0x0a },
|
|
|
|
|
{ 0x3140, 0x02 },
|
|
|
|
|
{ 0x3141, 0x00 },
|
|
|
|
|
{ 0x3f0d, 0x0a },
|
|
|
|
|
{ 0x3f14, 0x01 },
|
|
|
|
|
{ 0x3f3c, 0x02 },
|
|
|
|
|
{ 0x3f4d, 0x01 },
|
|
|
|
|
{ 0x3f4c, 0x01 },
|
|
|
|
|
{ 0x4254, 0x7f },
|
|
|
|
|
{ 0x0401, 0x00 },
|
|
|
|
|
{ 0x0404, 0x00 },
|
|
|
|
|
{ 0x0405, 0x10 },
|
|
|
|
|
{ 0x0408, 0x00 },
|
|
|
|
|
{ 0x0409, 0xac },
|
|
|
|
|
{ 0x040a, 0x00 },
|
|
|
|
|
{ 0x040b, 0x00 },
|
|
|
|
|
{ 0x040c, 0x05 },
|
|
|
|
|
{ 0x040d, 0x10 },
|
|
|
|
|
{ 0x040e, 0x02 },
|
|
|
|
|
{ 0x040f, 0xe0 },
|
|
|
|
|
{ 0x034c, 0x05 },
|
|
|
|
|
{ 0x034d, 0x10 },
|
|
|
|
|
{ 0x034e, 0x02 },
|
|
|
|
|
{ 0x034f, 0xe0 },
|
|
|
|
|
{ 0x3261, 0x00 },
|
|
|
|
|
{ 0x3264, 0x00 },
|
|
|
|
|
{ 0x3265, 0x10 },
|
|
|
|
|
{ 0x0301, 0x05 },
|
|
|
|
|
{ 0x0303, 0x04 },
|
|
|
|
|
{ 0x0305, 0x04 },
|
|
|
|
|
{ 0x0306, 0x01 },
|
|
|
|
|
{ 0x0307, 0x92 },
|
|
|
|
|
{ 0x0309, 0x0a },
|
|
|
|
|
{ 0x030b, 0x02 },
|
|
|
|
|
{ 0x030d, 0x02 },
|
|
|
|
|
{ 0x030e, 0x00 },
|
|
|
|
|
{ 0x030f, 0xfa },
|
|
|
|
|
{ 0x0310, 0x00 },
|
|
|
|
|
{ 0x0820, 0x0f },
|
|
|
|
|
{ 0x0821, 0x13 },
|
|
|
|
|
{ 0x0822, 0x33 },
|
|
|
|
|
{ 0x0823, 0x33 },
|
|
|
|
|
{ 0x3e20, 0x01 },
|
|
|
|
|
{ 0x3e37, 0x00 },
|
|
|
|
|
{ 0x3e3b, 0x01 },
|
|
|
|
|
{ 0x38a3, 0x01 },
|
|
|
|
|
{ 0x38a8, 0x00 },
|
|
|
|
|
{ 0x38a9, 0x00 },
|
|
|
|
|
{ 0x38aa, 0x00 },
|
|
|
|
|
{ 0x38ab, 0x00 },
|
|
|
|
|
{ 0x3234, 0x00 },
|
|
|
|
|
{ 0x3fc1, 0x00 },
|
|
|
|
|
{ 0x3235, 0x00 },
|
|
|
|
|
{ 0x3802, 0x00 },
|
|
|
|
|
{ 0x3143, 0x04 },
|
|
|
|
|
{ 0x360a, 0x00 },
|
|
|
|
|
{ 0x0b00, 0x00 },
|
|
|
|
|
{ 0x0106, 0x00 },
|
|
|
|
|
{ 0x0b05, 0x01 },
|
|
|
|
|
{ 0x0b06, 0x01 },
|
|
|
|
|
{ 0x3230, 0x00 },
|
|
|
|
|
{ 0x3602, 0x01 },
|
|
|
|
|
{ 0x3607, 0x01 },
|
|
|
|
|
{ 0x3c00, 0x00 },
|
|
|
|
|
{ 0x3c01, 0xba },
|
|
|
|
|
{ 0x3c02, 0xc8 },
|
|
|
|
|
{ 0x3c03, 0xaa },
|
|
|
|
|
{ 0x3c04, 0x91 },
|
|
|
|
|
{ 0x3c05, 0x54 },
|
|
|
|
|
{ 0x3c06, 0x26 },
|
|
|
|
|
{ 0x3c07, 0x20 },
|
|
|
|
|
{ 0x3c08, 0x51 },
|
|
|
|
|
{ 0x3d80, 0x00 },
|
|
|
|
|
{ 0x3f50, 0x00 },
|
|
|
|
|
{ 0x3f56, 0x00 },
|
|
|
|
|
{ 0x3f57, 0x30 },
|
|
|
|
|
{ 0x3f78, 0x00 },
|
|
|
|
|
{ 0x3f79, 0x34 },
|
|
|
|
|
{ 0x3f7c, 0x00 },
|
|
|
|
|
{ 0x3f7d, 0x00 },
|
|
|
|
|
{ 0x3fba, 0x00 },
|
|
|
|
|
{ 0x3fbb, 0x00 },
|
|
|
|
|
{ 0xa081, 0x04 },
|
|
|
|
|
{ 0xe014, 0x00 },
|
|
|
|
|
{ 0x0202, 0x04 },
|
|
|
|
|
{ 0x0203, 0xf6 },
|
|
|
|
|
{ 0x0224, 0x01 },
|
|
|
|
|
{ 0x0225, 0xf4 },
|
|
|
|
|
{ 0x0204, 0x00 },
|
|
|
|
|
{ 0x0205, 0x00 },
|
|
|
|
|
{ 0x0216, 0x00 },
|
|
|
|
|
{ 0x0217, 0x00 },
|
|
|
|
|
{ 0x020e, 0x01 },
|
|
|
|
|
{ 0x020f, 0x00 },
|
|
|
|
|
{ 0x0210, 0x01 },
|
|
|
|
|
{ 0x0211, 0x00 },
|
|
|
|
|
{ 0x0212, 0x01 },
|
|
|
|
|
{ 0x0213, 0x00 },
|
|
|
|
|
{ 0x0214, 0x01 },
|
|
|
|
|
{ 0x0215, 0x00 },
|
|
|
|
|
{ 0x0218, 0x01 },
|
|
|
|
|
{ 0x0219, 0x00 },
|
|
|
|
|
{ 0x3614, 0x00 },
|
|
|
|
|
{ 0x3616, 0x0d },
|
|
|
|
|
{ 0x3617, 0x56 },
|
|
|
|
|
{ 0xb612, 0x20 },
|
|
|
|
|
{ 0xb613, 0x20 },
|
|
|
|
|
{ 0xb614, 0x20 },
|
|
|
|
|
{ 0xb615, 0x20 },
|
|
|
|
|
{ 0xb616, 0x0a },
|
|
|
|
|
{ 0xb617, 0x0a },
|
|
|
|
|
{ 0xb618, 0x20 },
|
|
|
|
|
{ 0xb619, 0x20 },
|
|
|
|
|
{ 0xb61a, 0x20 },
|
|
|
|
|
{ 0xb61b, 0x20 },
|
|
|
|
|
{ 0xb61c, 0x0a },
|
|
|
|
|
{ 0xb61d, 0x0a },
|
|
|
|
|
{ 0xb666, 0x30 },
|
|
|
|
|
{ 0xb667, 0x30 },
|
|
|
|
|
{ 0xb668, 0x30 },
|
|
|
|
|
{ 0xb669, 0x30 },
|
|
|
|
|
{ 0xb66a, 0x14 },
|
|
|
|
|
{ 0xb66b, 0x14 },
|
|
|
|
|
{ 0xb66c, 0x20 },
|
|
|
|
|
{ 0xb66d, 0x20 },
|
|
|
|
|
{ 0xb66e, 0x20 },
|
|
|
|
|
{ 0xb66f, 0x20 },
|
|
|
|
|
{ 0xb670, 0x10 },
|
|
|
|
|
{ 0xb671, 0x10 },
|
|
|
|
|
{ 0x3237, 0x00 },
|
|
|
|
|
{ 0x3900, 0x00 },
|
|
|
|
|
{ 0x3901, 0x00 },
|
|
|
|
|
{ 0x3902, 0x00 },
|
|
|
|
|
{ 0x3904, 0x00 },
|
|
|
|
|
{ 0x3905, 0x00 },
|
|
|
|
|
{ 0x3906, 0x00 },
|
|
|
|
|
{ 0x3907, 0x00 },
|
|
|
|
|
{ 0x3908, 0x00 },
|
|
|
|
|
{ 0x3909, 0x00 },
|
|
|
|
|
{ 0x3912, 0x00 },
|
|
|
|
|
{ 0x3930, 0x00 },
|
|
|
|
|
{ 0x3931, 0x00 },
|
|
|
|
|
{ 0x3933, 0x00 },
|
|
|
|
|
{ 0x3934, 0x00 },
|
|
|
|
|
{ 0x3935, 0x00 },
|
|
|
|
|
{ 0x3936, 0x00 },
|
|
|
|
|
{ 0x3937, 0x00 },
|
|
|
|
|
{ 0x30ac, 0x00 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct imx319_reg mode_1280x720_regs[] = {
|
|
|
|
|
{ 0x0112, 0x0a },
|
|
|
|
|
{ 0x0113, 0x0a },
|
|
|
|
|
{ 0x0114, 0x03 },
|
|
|
|
|
{ 0x0342, 0x08 },
|
|
|
|
|
{ 0x0343, 0x20 },
|
|
|
|
|
{ 0x0340, 0x18 },
|
|
|
|
|
{ 0x0341, 0x2a },
|
|
|
|
|
{ 0x0344, 0x00 },
|
|
|
|
|
{ 0x0345, 0x00 },
|
|
|
|
|
{ 0x0346, 0x02 },
|
|
|
|
|
{ 0x0347, 0x00 },
|
|
|
|
|
{ 0x0348, 0x0c },
|
|
|
|
|
{ 0x0349, 0xcf },
|
|
|
|
|
{ 0x034a, 0x07 },
|
|
|
|
|
{ 0x034b, 0x9f },
|
|
|
|
|
{ 0x0220, 0x00 },
|
|
|
|
|
{ 0x0221, 0x11 },
|
|
|
|
|
{ 0x0381, 0x01 },
|
|
|
|
|
{ 0x0383, 0x01 },
|
|
|
|
|
{ 0x0385, 0x01 },
|
|
|
|
|
{ 0x0387, 0x01 },
|
|
|
|
|
{ 0x0900, 0x01 },
|
|
|
|
|
{ 0x0901, 0x22 },
|
|
|
|
|
{ 0x0902, 0x0a },
|
|
|
|
|
{ 0x3140, 0x02 },
|
|
|
|
|
{ 0x3141, 0x00 },
|
|
|
|
|
{ 0x3f0d, 0x0a },
|
|
|
|
|
{ 0x3f14, 0x01 },
|
|
|
|
|
{ 0x3f3c, 0x02 },
|
|
|
|
|
{ 0x3f4d, 0x01 },
|
|
|
|
|
{ 0x3f4c, 0x01 },
|
|
|
|
|
{ 0x4254, 0x7f },
|
|
|
|
|
{ 0x0401, 0x00 },
|
|
|
|
|
{ 0x0404, 0x00 },
|
|
|
|
|
{ 0x0405, 0x10 },
|
|
|
|
|
{ 0x0408, 0x00 },
|
|
|
|
|
{ 0x0409, 0xb4 },
|
|
|
|
|
{ 0x040a, 0x00 },
|
|
|
|
|
{ 0x040b, 0x00 },
|
|
|
|
|
{ 0x040c, 0x05 },
|
|
|
|
|
{ 0x040d, 0x00 },
|
|
|
|
|
{ 0x040e, 0x02 },
|
|
|
|
|
{ 0x040f, 0xd0 },
|
|
|
|
|
{ 0x034c, 0x05 },
|
|
|
|
|
{ 0x034d, 0x00 },
|
|
|
|
|
{ 0x034e, 0x02 },
|
|
|
|
|
{ 0x034f, 0xd0 },
|
|
|
|
|
{ 0x3261, 0x00 },
|
|
|
|
|
{ 0x3264, 0x00 },
|
|
|
|
|
{ 0x3265, 0x10 },
|
|
|
|
|
{ 0x0301, 0x05 },
|
|
|
|
|
{ 0x0303, 0x04 },
|
|
|
|
|
{ 0x0305, 0x04 },
|
|
|
|
|
{ 0x0306, 0x01 },
|
|
|
|
|
{ 0x0307, 0x92 },
|
|
|
|
|
{ 0x0309, 0x0a },
|
|
|
|
|
{ 0x030b, 0x02 },
|
|
|
|
|
{ 0x030d, 0x02 },
|
|
|
|
|
{ 0x030e, 0x00 },
|
|
|
|
|
{ 0x030f, 0xfa },
|
|
|
|
|
{ 0x0310, 0x00 },
|
|
|
|
|
{ 0x0820, 0x0f },
|
|
|
|
|
{ 0x0821, 0x13 },
|
|
|
|
|
{ 0x0822, 0x33 },
|
|
|
|
|
{ 0x0823, 0x33 },
|
|
|
|
|
{ 0x3e20, 0x01 },
|
|
|
|
|
{ 0x3e37, 0x00 },
|
|
|
|
|
{ 0x3e3b, 0x01 },
|
|
|
|
|
{ 0x38a3, 0x01 },
|
|
|
|
|
{ 0x38a8, 0x00 },
|
|
|
|
|
{ 0x38a9, 0x00 },
|
|
|
|
|
{ 0x38aa, 0x00 },
|
|
|
|
|
{ 0x38ab, 0x00 },
|
|
|
|
|
{ 0x3234, 0x00 },
|
|
|
|
|
{ 0x3fc1, 0x00 },
|
|
|
|
|
{ 0x3235, 0x00 },
|
|
|
|
|
{ 0x3802, 0x00 },
|
|
|
|
|
{ 0x3143, 0x04 },
|
|
|
|
|
{ 0x360a, 0x00 },
|
|
|
|
|
{ 0x0b00, 0x00 },
|
|
|
|
|
{ 0x0106, 0x00 },
|
|
|
|
|
{ 0x0b05, 0x01 },
|
|
|
|
|
{ 0x0b06, 0x01 },
|
|
|
|
|
{ 0x3230, 0x00 },
|
|
|
|
|
{ 0x3602, 0x01 },
|
|
|
|
|
{ 0x3607, 0x01 },
|
|
|
|
|
{ 0x3c00, 0x00 },
|
|
|
|
|
{ 0x3c01, 0xba },
|
|
|
|
|
{ 0x3c02, 0xc8 },
|
|
|
|
|
{ 0x3c03, 0xaa },
|
|
|
|
|
{ 0x3c04, 0x91 },
|
|
|
|
|
{ 0x3c05, 0x54 },
|
|
|
|
|
{ 0x3c06, 0x26 },
|
|
|
|
|
{ 0x3c07, 0x20 },
|
|
|
|
|
{ 0x3c08, 0x51 },
|
|
|
|
|
{ 0x3d80, 0x00 },
|
|
|
|
|
{ 0x3f50, 0x00 },
|
|
|
|
|
{ 0x3f56, 0x00 },
|
|
|
|
|
{ 0x3f57, 0x30 },
|
|
|
|
|
{ 0x3f78, 0x00 },
|
|
|
|
|
{ 0x3f79, 0x34 },
|
|
|
|
|
{ 0x3f7c, 0x00 },
|
|
|
|
|
{ 0x3f7d, 0x00 },
|
|
|
|
|
{ 0x3fba, 0x00 },
|
|
|
|
|
{ 0x3fbb, 0x00 },
|
|
|
|
|
{ 0xa081, 0x04 },
|
|
|
|
|
{ 0xe014, 0x00 },
|
|
|
|
|
{ 0x0202, 0x04 },
|
|
|
|
|
{ 0x0203, 0xf6 },
|
|
|
|
|
{ 0x0224, 0x01 },
|
|
|
|
|
{ 0x0225, 0xf4 },
|
|
|
|
|
{ 0x0204, 0x00 },
|
|
|
|
|
{ 0x0205, 0x00 },
|
|
|
|
|
{ 0x0216, 0x00 },
|
|
|
|
|
{ 0x0217, 0x00 },
|
|
|
|
|
{ 0x020e, 0x01 },
|
|
|
|
|
{ 0x020f, 0x00 },
|
|
|
|
|
{ 0x0210, 0x01 },
|
|
|
|
|
{ 0x0211, 0x00 },
|
|
|
|
|
{ 0x0212, 0x01 },
|
|
|
|
|
{ 0x0213, 0x00 },
|
|
|
|
|
{ 0x0214, 0x01 },
|
|
|
|
|
{ 0x0215, 0x00 },
|
|
|
|
|
{ 0x0218, 0x01 },
|
|
|
|
|
{ 0x0219, 0x00 },
|
|
|
|
|
{ 0x3614, 0x00 },
|
|
|
|
|
{ 0x3616, 0x0d },
|
|
|
|
|
{ 0x3617, 0x56 },
|
|
|
|
|
{ 0xb612, 0x20 },
|
|
|
|
|
{ 0xb613, 0x20 },
|
|
|
|
|
{ 0xb614, 0x20 },
|
|
|
|
|
{ 0xb615, 0x20 },
|
|
|
|
|
{ 0xb616, 0x0a },
|
|
|
|
|
{ 0xb617, 0x0a },
|
|
|
|
|
{ 0xb618, 0x20 },
|
|
|
|
|
{ 0xb619, 0x20 },
|
|
|
|
|
{ 0xb61a, 0x20 },
|
|
|
|
|
{ 0xb61b, 0x20 },
|
|
|
|
|
{ 0xb61c, 0x0a },
|
|
|
|
|
{ 0xb61d, 0x0a },
|
|
|
|
|
{ 0xb666, 0x30 },
|
|
|
|
|
{ 0xb667, 0x30 },
|
|
|
|
|
{ 0xb668, 0x30 },
|
|
|
|
|
{ 0xb669, 0x30 },
|
|
|
|
|
{ 0xb66a, 0x14 },
|
|
|
|
|
{ 0xb66b, 0x14 },
|
|
|
|
|
{ 0xb66c, 0x20 },
|
|
|
|
|
{ 0xb66d, 0x20 },
|
|
|
|
|
{ 0xb66e, 0x20 },
|
|
|
|
|
{ 0xb66f, 0x20 },
|
|
|
|
|
{ 0xb670, 0x10 },
|
|
|
|
|
{ 0xb671, 0x10 },
|
|
|
|
|
{ 0x3237, 0x00 },
|
|
|
|
|
{ 0x3900, 0x00 },
|
|
|
|
|
{ 0x3901, 0x00 },
|
|
|
|
|
{ 0x3902, 0x00 },
|
|
|
|
|
{ 0x3904, 0x00 },
|
|
|
|
|
{ 0x3905, 0x00 },
|
|
|
|
|
{ 0x3906, 0x00 },
|
|
|
|
|
{ 0x3907, 0x00 },
|
|
|
|
|
{ 0x3908, 0x00 },
|
|
|
|
|
{ 0x3909, 0x00 },
|
|
|
|
|
{ 0x3912, 0x00 },
|
|
|
|
|
{ 0x3930, 0x00 },
|
|
|
|
|
{ 0x3931, 0x00 },
|
|
|
|
|
{ 0x3933, 0x00 },
|
|
|
|
|
{ 0x3934, 0x00 },
|
|
|
|
|
{ 0x3935, 0x00 },
|
|
|
|
|
{ 0x3936, 0x00 },
|
|
|
|
|
{ 0x3937, 0x00 },
|
|
|
|
|
{ 0x30ac, 0x00 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const char * const imx319_test_pattern_menu[] = {
|
|
|
|
|
"Disabled",
|
2018-11-27 12:01:01 +08:00
|
|
|
"Solid Colour",
|
|
|
|
|
"Eight Vertical Colour Bars",
|
|
|
|
|
"Colour Bars With Fade to Grey",
|
|
|
|
|
"Pseudorandom Sequence (PN9)",
|
2018-09-26 10:42:18 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* supported link frequencies */
|
|
|
|
|
static const s64 link_freq_menu_items[] = {
|
|
|
|
|
IMX319_LINK_FREQ_DEFAULT,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Mode configs */
|
|
|
|
|
static const struct imx319_mode supported_modes[] = {
|
|
|
|
|
{
|
|
|
|
|
.width = 3280,
|
|
|
|
|
.height = 2464,
|
|
|
|
|
.fll_def = 3242,
|
|
|
|
|
.fll_min = 3242,
|
|
|
|
|
.llp = 3968,
|
|
|
|
|
.link_freq_index = IMX319_LINK_FREQ_INDEX,
|
|
|
|
|
.reg_list = {
|
|
|
|
|
.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
|
|
|
|
|
.regs = mode_3280x2464_regs,
|
|
|
|
|
},
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.width = 3264,
|
|
|
|
|
.height = 2448,
|
|
|
|
|
.fll_def = 3242,
|
|
|
|
|
.fll_min = 3242,
|
|
|
|
|
.llp = 3968,
|
|
|
|
|
.link_freq_index = IMX319_LINK_FREQ_INDEX,
|
|
|
|
|
.reg_list = {
|
|
|
|
|
.num_of_regs = ARRAY_SIZE(mode_3264x2448_regs),
|
|
|
|
|
.regs = mode_3264x2448_regs,
|
|
|
|
|
},
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.width = 1936,
|
|
|
|
|
.height = 1096,
|
|
|
|
|
.fll_def = 3242,
|
|
|
|
|
.fll_min = 3242,
|
|
|
|
|
.llp = 3968,
|
|
|
|
|
.link_freq_index = IMX319_LINK_FREQ_INDEX,
|
|
|
|
|
.reg_list = {
|
|
|
|
|
.num_of_regs = ARRAY_SIZE(mode_1936x1096_regs),
|
|
|
|
|
.regs = mode_1936x1096_regs,
|
|
|
|
|
},
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.width = 1920,
|
|
|
|
|
.height = 1080,
|
|
|
|
|
.fll_def = 3242,
|
|
|
|
|
.fll_min = 3242,
|
|
|
|
|
.llp = 3968,
|
|
|
|
|
.link_freq_index = IMX319_LINK_FREQ_INDEX,
|
|
|
|
|
.reg_list = {
|
|
|
|
|
.num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
|
|
|
|
|
.regs = mode_1920x1080_regs,
|
|
|
|
|
},
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.width = 1640,
|
|
|
|
|
.height = 1232,
|
|
|
|
|
.fll_def = 5146,
|
|
|
|
|
.fll_min = 5146,
|
|
|
|
|
.llp = 2500,
|
|
|
|
|
.link_freq_index = IMX319_LINK_FREQ_INDEX,
|
|
|
|
|
.reg_list = {
|
|
|
|
|
.num_of_regs = ARRAY_SIZE(mode_1640x1232_regs),
|
|
|
|
|
.regs = mode_1640x1232_regs,
|
|
|
|
|
},
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.width = 1640,
|
|
|
|
|
.height = 922,
|
|
|
|
|
.fll_def = 5146,
|
|
|
|
|
.fll_min = 5146,
|
|
|
|
|
.llp = 2500,
|
|
|
|
|
.link_freq_index = IMX319_LINK_FREQ_INDEX,
|
|
|
|
|
.reg_list = {
|
|
|
|
|
.num_of_regs = ARRAY_SIZE(mode_1640x922_regs),
|
|
|
|
|
.regs = mode_1640x922_regs,
|
|
|
|
|
},
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.width = 1296,
|
|
|
|
|
.height = 736,
|
|
|
|
|
.fll_def = 5146,
|
|
|
|
|
.fll_min = 5146,
|
|
|
|
|
.llp = 2500,
|
|
|
|
|
.link_freq_index = IMX319_LINK_FREQ_INDEX,
|
|
|
|
|
.reg_list = {
|
|
|
|
|
.num_of_regs = ARRAY_SIZE(mode_1296x736_regs),
|
|
|
|
|
.regs = mode_1296x736_regs,
|
|
|
|
|
},
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.width = 1280,
|
|
|
|
|
.height = 720,
|
|
|
|
|
.fll_def = 5146,
|
|
|
|
|
.fll_min = 5146,
|
|
|
|
|
.llp = 2500,
|
|
|
|
|
.link_freq_index = IMX319_LINK_FREQ_INDEX,
|
|
|
|
|
.reg_list = {
|
|
|
|
|
.num_of_regs = ARRAY_SIZE(mode_1280x720_regs),
|
|
|
|
|
.regs = mode_1280x720_regs,
|
|
|
|
|
},
|
|
|
|
|
},
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static inline struct imx319 *to_imx319(struct v4l2_subdev *_sd)
|
|
|
|
|
{
|
|
|
|
|
return container_of(_sd, struct imx319, sd);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Get bayer order based on flip setting. */
|
|
|
|
|
static u32 imx319_get_format_code(struct imx319 *imx319)
|
|
|
|
|
{
|
|
|
|
|
/*
|
|
|
|
|
* Only one bayer order is supported.
|
|
|
|
|
* It depends on the flip settings.
|
|
|
|
|
*/
|
|
|
|
|
u32 code;
|
|
|
|
|
static const u32 codes[2][2] = {
|
|
|
|
|
{ MEDIA_BUS_FMT_SRGGB10_1X10, MEDIA_BUS_FMT_SGRBG10_1X10, },
|
|
|
|
|
{ MEDIA_BUS_FMT_SGBRG10_1X10, MEDIA_BUS_FMT_SBGGR10_1X10, },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
lockdep_assert_held(&imx319->mutex);
|
|
|
|
|
code = codes[imx319->vflip->val][imx319->hflip->val];
|
|
|
|
|
|
|
|
|
|
return code;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Read registers up to 4 at a time */
|
|
|
|
|
static int imx319_read_reg(struct imx319 *imx319, u16 reg, u32 len, u32 *val)
|
|
|
|
|
{
|
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
|
|
|
|
|
struct i2c_msg msgs[2];
|
|
|
|
|
u8 addr_buf[2];
|
|
|
|
|
u8 data_buf[4] = { 0 };
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
if (len > 4)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
put_unaligned_be16(reg, addr_buf);
|
|
|
|
|
/* Write register address */
|
|
|
|
|
msgs[0].addr = client->addr;
|
|
|
|
|
msgs[0].flags = 0;
|
|
|
|
|
msgs[0].len = ARRAY_SIZE(addr_buf);
|
|
|
|
|
msgs[0].buf = addr_buf;
|
|
|
|
|
|
|
|
|
|
/* Read data from register */
|
|
|
|
|
msgs[1].addr = client->addr;
|
|
|
|
|
msgs[1].flags = I2C_M_RD;
|
|
|
|
|
msgs[1].len = len;
|
|
|
|
|
msgs[1].buf = &data_buf[4 - len];
|
|
|
|
|
|
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
|
|
|
if (ret != ARRAY_SIZE(msgs))
|
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
|
|
*val = get_unaligned_be32(data_buf);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Write registers up to 4 at a time */
|
|
|
|
|
static int imx319_write_reg(struct imx319 *imx319, u16 reg, u32 len, u32 val)
|
|
|
|
|
{
|
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
|
|
|
|
|
u8 buf[6];
|
|
|
|
|
|
|
|
|
|
if (len > 4)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
put_unaligned_be16(reg, buf);
|
|
|
|
|
put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
|
|
|
|
|
if (i2c_master_send(client, buf, len + 2) != len + 2)
|
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Write a list of registers */
|
|
|
|
|
static int imx319_write_regs(struct imx319 *imx319,
|
2018-10-05 22:11:43 +08:00
|
|
|
const struct imx319_reg *regs, u32 len)
|
2018-09-26 10:42:18 +08:00
|
|
|
{
|
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
|
|
|
|
|
int ret;
|
|
|
|
|
u32 i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < len; i++) {
|
|
|
|
|
ret = imx319_write_reg(imx319, regs[i].address, 1, regs[i].val);
|
|
|
|
|
if (ret) {
|
|
|
|
|
dev_err_ratelimited(&client->dev,
|
|
|
|
|
"write reg 0x%4.4x return err %d",
|
|
|
|
|
regs[i].address, ret);
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Open sub-device */
|
|
|
|
|
static int imx319_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
|
|
|
{
|
|
|
|
|
struct imx319 *imx319 = to_imx319(sd);
|
|
|
|
|
struct v4l2_mbus_framefmt *try_fmt =
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
v4l2_subdev_get_try_format(sd, fh->state, 0);
|
2018-09-26 10:42:18 +08:00
|
|
|
|
|
|
|
|
mutex_lock(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
/* Initialize try_fmt */
|
|
|
|
|
try_fmt->width = imx319->cur_mode->width;
|
|
|
|
|
try_fmt->height = imx319->cur_mode->height;
|
|
|
|
|
try_fmt->code = imx319_get_format_code(imx319);
|
|
|
|
|
try_fmt->field = V4L2_FIELD_NONE;
|
|
|
|
|
|
|
|
|
|
mutex_unlock(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int imx319_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
|
|
|
{
|
|
|
|
|
struct imx319 *imx319 = container_of(ctrl->handler,
|
|
|
|
|
struct imx319, ctrl_handler);
|
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
|
|
|
|
|
s64 max;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
/* Propagate change of current control to all related controls */
|
|
|
|
|
switch (ctrl->id) {
|
|
|
|
|
case V4L2_CID_VBLANK:
|
|
|
|
|
/* Update max exposure while meeting expected vblanking */
|
|
|
|
|
max = imx319->cur_mode->height + ctrl->val - 18;
|
|
|
|
|
__v4l2_ctrl_modify_range(imx319->exposure,
|
|
|
|
|
imx319->exposure->minimum,
|
|
|
|
|
max, imx319->exposure->step, max);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Applying V4L2 control value only happens
|
|
|
|
|
* when power is up for streaming
|
|
|
|
|
*/
|
|
|
|
|
if (!pm_runtime_get_if_in_use(&client->dev))
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
switch (ctrl->id) {
|
|
|
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
|
|
|
/* Analog gain = 1024/(1024 - ctrl->val) times */
|
|
|
|
|
ret = imx319_write_reg(imx319, IMX319_REG_ANALOG_GAIN, 2,
|
|
|
|
|
ctrl->val);
|
|
|
|
|
break;
|
|
|
|
|
case V4L2_CID_DIGITAL_GAIN:
|
|
|
|
|
ret = imx319_write_reg(imx319, IMX319_REG_DIG_GAIN_GLOBAL, 2,
|
|
|
|
|
ctrl->val);
|
|
|
|
|
break;
|
|
|
|
|
case V4L2_CID_EXPOSURE:
|
|
|
|
|
ret = imx319_write_reg(imx319, IMX319_REG_EXPOSURE, 2,
|
|
|
|
|
ctrl->val);
|
|
|
|
|
break;
|
|
|
|
|
case V4L2_CID_VBLANK:
|
|
|
|
|
/* Update FLL that meets expected vertical blanking */
|
|
|
|
|
ret = imx319_write_reg(imx319, IMX319_REG_FLL, 2,
|
|
|
|
|
imx319->cur_mode->height + ctrl->val);
|
|
|
|
|
break;
|
|
|
|
|
case V4L2_CID_TEST_PATTERN:
|
|
|
|
|
ret = imx319_write_reg(imx319, IMX319_REG_TEST_PATTERN,
|
|
|
|
|
2, ctrl->val);
|
|
|
|
|
break;
|
|
|
|
|
case V4L2_CID_HFLIP:
|
|
|
|
|
case V4L2_CID_VFLIP:
|
|
|
|
|
ret = imx319_write_reg(imx319, IMX319_REG_ORIENTATION, 1,
|
|
|
|
|
imx319->hflip->val |
|
|
|
|
|
imx319->vflip->val << 1);
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
ret = -EINVAL;
|
|
|
|
|
dev_info(&client->dev, "ctrl(id:0x%x,val:0x%x) is not handled",
|
|
|
|
|
ctrl->id, ctrl->val);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const struct v4l2_ctrl_ops imx319_ctrl_ops = {
|
|
|
|
|
.s_ctrl = imx319_set_ctrl,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int imx319_enum_mbus_code(struct v4l2_subdev *sd,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2018-10-05 22:11:43 +08:00
|
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
2018-09-26 10:42:18 +08:00
|
|
|
{
|
|
|
|
|
struct imx319 *imx319 = to_imx319(sd);
|
|
|
|
|
|
|
|
|
|
if (code->index > 0)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
mutex_lock(&imx319->mutex);
|
|
|
|
|
code->code = imx319_get_format_code(imx319);
|
|
|
|
|
mutex_unlock(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int imx319_enum_frame_size(struct v4l2_subdev *sd,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2018-10-05 22:11:43 +08:00
|
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
2018-09-26 10:42:18 +08:00
|
|
|
{
|
|
|
|
|
struct imx319 *imx319 = to_imx319(sd);
|
|
|
|
|
|
|
|
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
mutex_lock(&imx319->mutex);
|
|
|
|
|
if (fse->code != imx319_get_format_code(imx319)) {
|
|
|
|
|
mutex_unlock(&imx319->mutex);
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
}
|
|
|
|
|
mutex_unlock(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
|
|
|
fse->max_width = fse->min_width;
|
|
|
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
|
|
|
fse->max_height = fse->min_height;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void imx319_update_pad_format(struct imx319 *imx319,
|
|
|
|
|
const struct imx319_mode *mode,
|
|
|
|
|
struct v4l2_subdev_format *fmt)
|
|
|
|
|
{
|
|
|
|
|
fmt->format.width = mode->width;
|
|
|
|
|
fmt->format.height = mode->height;
|
|
|
|
|
fmt->format.code = imx319_get_format_code(imx319);
|
|
|
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int imx319_do_get_pad_format(struct imx319 *imx319,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2018-10-05 22:11:43 +08:00
|
|
|
struct v4l2_subdev_format *fmt)
|
2018-09-26 10:42:18 +08:00
|
|
|
{
|
|
|
|
|
struct v4l2_mbus_framefmt *framefmt;
|
|
|
|
|
struct v4l2_subdev *sd = &imx319->sd;
|
|
|
|
|
|
|
|
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
|
2018-09-26 10:42:18 +08:00
|
|
|
fmt->format = *framefmt;
|
|
|
|
|
} else {
|
|
|
|
|
imx319_update_pad_format(imx319, imx319->cur_mode, fmt);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int imx319_get_pad_format(struct v4l2_subdev *sd,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2018-10-05 22:11:43 +08:00
|
|
|
struct v4l2_subdev_format *fmt)
|
2018-09-26 10:42:18 +08:00
|
|
|
{
|
|
|
|
|
struct imx319 *imx319 = to_imx319(sd);
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
mutex_lock(&imx319->mutex);
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
ret = imx319_do_get_pad_format(imx319, sd_state, fmt);
|
2018-09-26 10:42:18 +08:00
|
|
|
mutex_unlock(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
imx319_set_pad_format(struct v4l2_subdev *sd,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2018-10-05 22:11:43 +08:00
|
|
|
struct v4l2_subdev_format *fmt)
|
2018-09-26 10:42:18 +08:00
|
|
|
{
|
|
|
|
|
struct imx319 *imx319 = to_imx319(sd);
|
|
|
|
|
const struct imx319_mode *mode;
|
|
|
|
|
struct v4l2_mbus_framefmt *framefmt;
|
|
|
|
|
s32 vblank_def;
|
|
|
|
|
s32 vblank_min;
|
|
|
|
|
s64 h_blank;
|
|
|
|
|
u64 pixel_rate;
|
|
|
|
|
u32 height;
|
|
|
|
|
|
|
|
|
|
mutex_lock(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Only one bayer order is supported.
|
|
|
|
|
* It depends on the flip settings.
|
|
|
|
|
*/
|
|
|
|
|
fmt->format.code = imx319_get_format_code(imx319);
|
|
|
|
|
|
|
|
|
|
mode = v4l2_find_nearest_size(supported_modes,
|
|
|
|
|
ARRAY_SIZE(supported_modes),
|
|
|
|
|
width, height,
|
|
|
|
|
fmt->format.width, fmt->format.height);
|
|
|
|
|
imx319_update_pad_format(imx319, mode, fmt);
|
|
|
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
|
2018-09-26 10:42:18 +08:00
|
|
|
*framefmt = fmt->format;
|
|
|
|
|
} else {
|
|
|
|
|
imx319->cur_mode = mode;
|
|
|
|
|
pixel_rate = imx319->link_def_freq * 2 * 4;
|
|
|
|
|
do_div(pixel_rate, 10);
|
|
|
|
|
__v4l2_ctrl_s_ctrl_int64(imx319->pixel_rate, pixel_rate);
|
|
|
|
|
/* Update limits and set FPS to default */
|
|
|
|
|
height = imx319->cur_mode->height;
|
|
|
|
|
vblank_def = imx319->cur_mode->fll_def - height;
|
|
|
|
|
vblank_min = imx319->cur_mode->fll_min - height;
|
|
|
|
|
height = IMX319_FLL_MAX - height;
|
|
|
|
|
__v4l2_ctrl_modify_range(imx319->vblank, vblank_min, height, 1,
|
|
|
|
|
vblank_def);
|
|
|
|
|
__v4l2_ctrl_s_ctrl(imx319->vblank, vblank_def);
|
|
|
|
|
h_blank = mode->llp - imx319->cur_mode->width;
|
|
|
|
|
/*
|
|
|
|
|
* Currently hblank is not changeable.
|
|
|
|
|
* So FPS control is done only by vblank.
|
|
|
|
|
*/
|
|
|
|
|
__v4l2_ctrl_modify_range(imx319->hblank, h_blank,
|
|
|
|
|
h_blank, 1, h_blank);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
mutex_unlock(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2021-10-18 20:17:28 +08:00
|
|
|
/* Verify chip ID */
|
|
|
|
|
static int imx319_identify_module(struct imx319 *imx319)
|
|
|
|
|
{
|
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
|
|
|
|
|
int ret;
|
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
|
|
if (imx319->identified)
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val);
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
if (val != IMX319_CHIP_ID) {
|
|
|
|
|
dev_err(&client->dev, "chip id mismatch: %x!=%x",
|
|
|
|
|
IMX319_CHIP_ID, val);
|
|
|
|
|
return -EIO;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
imx319->identified = true;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2018-09-26 10:42:18 +08:00
|
|
|
/* Start streaming */
|
|
|
|
|
static int imx319_start_streaming(struct imx319 *imx319)
|
|
|
|
|
{
|
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
|
|
|
|
|
const struct imx319_reg_list *reg_list;
|
|
|
|
|
int ret;
|
|
|
|
|
|
2021-10-18 20:17:28 +08:00
|
|
|
ret = imx319_identify_module(imx319);
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
|
|
|
|
|
2018-09-26 10:42:18 +08:00
|
|
|
/* Global Setting */
|
|
|
|
|
reg_list = &imx319_global_setting;
|
|
|
|
|
ret = imx319_write_regs(imx319, reg_list->regs, reg_list->num_of_regs);
|
|
|
|
|
if (ret) {
|
|
|
|
|
dev_err(&client->dev, "failed to set global settings");
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Apply default values of current mode */
|
|
|
|
|
reg_list = &imx319->cur_mode->reg_list;
|
|
|
|
|
ret = imx319_write_regs(imx319, reg_list->regs, reg_list->num_of_regs);
|
|
|
|
|
if (ret) {
|
|
|
|
|
dev_err(&client->dev, "failed to set mode");
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* set digital gain control to all color mode */
|
|
|
|
|
ret = imx319_write_reg(imx319, IMX319_REG_DPGA_USE_GLOBAL_GAIN, 1, 1);
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
/* Apply customized values from user */
|
|
|
|
|
ret = __v4l2_ctrl_handler_setup(imx319->sd.ctrl_handler);
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
return imx319_write_reg(imx319, IMX319_REG_MODE_SELECT,
|
|
|
|
|
1, IMX319_MODE_STREAMING);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Stop streaming */
|
|
|
|
|
static int imx319_stop_streaming(struct imx319 *imx319)
|
|
|
|
|
{
|
|
|
|
|
return imx319_write_reg(imx319, IMX319_REG_MODE_SELECT,
|
|
|
|
|
1, IMX319_MODE_STANDBY);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int imx319_set_stream(struct v4l2_subdev *sd, int enable)
|
|
|
|
|
{
|
|
|
|
|
struct imx319 *imx319 = to_imx319(sd);
|
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
|
|
mutex_lock(&imx319->mutex);
|
|
|
|
|
if (imx319->streaming == enable) {
|
|
|
|
|
mutex_unlock(&imx319->mutex);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (enable) {
|
2021-04-23 23:19:13 +08:00
|
|
|
ret = pm_runtime_resume_and_get(&client->dev);
|
|
|
|
|
if (ret < 0)
|
2018-09-26 10:42:18 +08:00
|
|
|
goto err_unlock;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Apply default & customized values
|
|
|
|
|
* and then start streaming.
|
|
|
|
|
*/
|
|
|
|
|
ret = imx319_start_streaming(imx319);
|
|
|
|
|
if (ret)
|
|
|
|
|
goto err_rpm_put;
|
|
|
|
|
} else {
|
|
|
|
|
imx319_stop_streaming(imx319);
|
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
imx319->streaming = enable;
|
|
|
|
|
|
|
|
|
|
/* vflip and hflip cannot change during streaming */
|
|
|
|
|
__v4l2_ctrl_grab(imx319->vflip, enable);
|
|
|
|
|
__v4l2_ctrl_grab(imx319->hflip, enable);
|
|
|
|
|
|
|
|
|
|
mutex_unlock(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
err_rpm_put:
|
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
|
err_unlock:
|
|
|
|
|
mutex_unlock(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int __maybe_unused imx319_suspend(struct device *dev)
|
|
|
|
|
{
|
2020-09-22 00:23:21 +08:00
|
|
|
struct v4l2_subdev *sd = dev_get_drvdata(dev);
|
2018-09-26 10:42:18 +08:00
|
|
|
struct imx319 *imx319 = to_imx319(sd);
|
|
|
|
|
|
|
|
|
|
if (imx319->streaming)
|
|
|
|
|
imx319_stop_streaming(imx319);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int __maybe_unused imx319_resume(struct device *dev)
|
|
|
|
|
{
|
2020-09-22 00:23:21 +08:00
|
|
|
struct v4l2_subdev *sd = dev_get_drvdata(dev);
|
2018-09-26 10:42:18 +08:00
|
|
|
struct imx319 *imx319 = to_imx319(sd);
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
if (imx319->streaming) {
|
|
|
|
|
ret = imx319_start_streaming(imx319);
|
|
|
|
|
if (ret)
|
|
|
|
|
goto error;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
error:
|
|
|
|
|
imx319_stop_streaming(imx319);
|
|
|
|
|
imx319->streaming = 0;
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_core_ops imx319_subdev_core_ops = {
|
|
|
|
|
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
|
|
|
|
|
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_video_ops imx319_video_ops = {
|
|
|
|
|
.s_stream = imx319_set_stream,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_pad_ops imx319_pad_ops = {
|
|
|
|
|
.enum_mbus_code = imx319_enum_mbus_code,
|
|
|
|
|
.get_fmt = imx319_get_pad_format,
|
|
|
|
|
.set_fmt = imx319_set_pad_format,
|
|
|
|
|
.enum_frame_size = imx319_enum_frame_size,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_ops imx319_subdev_ops = {
|
|
|
|
|
.core = &imx319_subdev_core_ops,
|
|
|
|
|
.video = &imx319_video_ops,
|
|
|
|
|
.pad = &imx319_pad_ops,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct media_entity_operations imx319_subdev_entity_ops = {
|
|
|
|
|
.link_validate = v4l2_subdev_link_validate,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_internal_ops imx319_internal_ops = {
|
|
|
|
|
.open = imx319_open,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Initialize control handlers */
|
|
|
|
|
static int imx319_init_controls(struct imx319 *imx319)
|
|
|
|
|
{
|
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
|
|
|
|
|
struct v4l2_ctrl_handler *ctrl_hdlr;
|
|
|
|
|
s64 exposure_max;
|
|
|
|
|
s64 vblank_def;
|
|
|
|
|
s64 vblank_min;
|
|
|
|
|
s64 hblank;
|
|
|
|
|
u64 pixel_rate;
|
|
|
|
|
const struct imx319_mode *mode;
|
|
|
|
|
u32 max;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
ctrl_hdlr = &imx319->ctrl_handler;
|
|
|
|
|
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
ctrl_hdlr->lock = &imx319->mutex;
|
|
|
|
|
max = ARRAY_SIZE(link_freq_menu_items) - 1;
|
|
|
|
|
imx319->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx319_ctrl_ops,
|
|
|
|
|
V4L2_CID_LINK_FREQ, max, 0,
|
|
|
|
|
link_freq_menu_items);
|
|
|
|
|
if (imx319->link_freq)
|
|
|
|
|
imx319->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
|
|
|
|
|
|
/* pixel_rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
|
|
|
|
|
pixel_rate = imx319->link_def_freq * 2 * 4;
|
|
|
|
|
do_div(pixel_rate, 10);
|
|
|
|
|
/* By default, PIXEL_RATE is read only */
|
|
|
|
|
imx319->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx319_ctrl_ops,
|
|
|
|
|
V4L2_CID_PIXEL_RATE, pixel_rate,
|
|
|
|
|
pixel_rate, 1, pixel_rate);
|
|
|
|
|
|
|
|
|
|
/* Initial vblank/hblank/exposure parameters based on current mode */
|
|
|
|
|
mode = imx319->cur_mode;
|
|
|
|
|
vblank_def = mode->fll_def - mode->height;
|
|
|
|
|
vblank_min = mode->fll_min - mode->height;
|
|
|
|
|
imx319->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx319_ctrl_ops,
|
|
|
|
|
V4L2_CID_VBLANK, vblank_min,
|
|
|
|
|
IMX319_FLL_MAX - mode->height,
|
|
|
|
|
1, vblank_def);
|
|
|
|
|
|
|
|
|
|
hblank = mode->llp - mode->width;
|
|
|
|
|
imx319->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx319_ctrl_ops,
|
|
|
|
|
V4L2_CID_HBLANK, hblank, hblank,
|
|
|
|
|
1, hblank);
|
|
|
|
|
if (imx319->hblank)
|
|
|
|
|
imx319->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
|
|
|
|
|
|
/* fll >= exposure time + adjust parameter (default value is 18) */
|
|
|
|
|
exposure_max = mode->fll_def - 18;
|
|
|
|
|
imx319->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx319_ctrl_ops,
|
|
|
|
|
V4L2_CID_EXPOSURE,
|
|
|
|
|
IMX319_EXPOSURE_MIN, exposure_max,
|
|
|
|
|
IMX319_EXPOSURE_STEP,
|
|
|
|
|
IMX319_EXPOSURE_DEFAULT);
|
|
|
|
|
|
|
|
|
|
imx319->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx319_ctrl_ops,
|
|
|
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
2022-12-05 23:21:47 +08:00
|
|
|
if (imx319->hflip)
|
|
|
|
|
imx319->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
|
2018-09-26 10:42:18 +08:00
|
|
|
imx319->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx319_ctrl_ops,
|
|
|
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
2022-12-05 23:21:47 +08:00
|
|
|
if (imx319->vflip)
|
|
|
|
|
imx319->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
|
2018-09-26 10:42:18 +08:00
|
|
|
|
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &imx319_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
|
|
|
|
|
IMX319_ANA_GAIN_MIN, IMX319_ANA_GAIN_MAX,
|
|
|
|
|
IMX319_ANA_GAIN_STEP, IMX319_ANA_GAIN_DEFAULT);
|
|
|
|
|
|
|
|
|
|
/* Digital gain */
|
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &imx319_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
|
|
|
|
|
IMX319_DGTL_GAIN_MIN, IMX319_DGTL_GAIN_MAX,
|
|
|
|
|
IMX319_DGTL_GAIN_STEP, IMX319_DGTL_GAIN_DEFAULT);
|
|
|
|
|
|
|
|
|
|
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx319_ctrl_ops,
|
|
|
|
|
V4L2_CID_TEST_PATTERN,
|
|
|
|
|
ARRAY_SIZE(imx319_test_pattern_menu) - 1,
|
|
|
|
|
0, 0, imx319_test_pattern_menu);
|
|
|
|
|
if (ctrl_hdlr->error) {
|
|
|
|
|
ret = ctrl_hdlr->error;
|
|
|
|
|
dev_err(&client->dev, "control init failed: %d", ret);
|
|
|
|
|
goto error;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
imx319->sd.ctrl_handler = ctrl_hdlr;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
error:
|
|
|
|
|
v4l2_ctrl_handler_free(ctrl_hdlr);
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct imx319_hwcfg *imx319_get_hwcfg(struct device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct imx319_hwcfg *cfg;
|
|
|
|
|
struct v4l2_fwnode_endpoint bus_cfg = {
|
|
|
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY
|
|
|
|
|
};
|
|
|
|
|
struct fwnode_handle *ep;
|
|
|
|
|
struct fwnode_handle *fwnode = dev_fwnode(dev);
|
|
|
|
|
unsigned int i;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
if (!fwnode)
|
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
|
|
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
|
|
|
|
|
if (!ep)
|
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
|
|
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
|
|
|
|
|
if (ret)
|
|
|
|
|
goto out_err;
|
|
|
|
|
|
|
|
|
|
cfg = devm_kzalloc(dev, sizeof(*cfg), GFP_KERNEL);
|
|
|
|
|
if (!cfg)
|
|
|
|
|
goto out_err;
|
|
|
|
|
|
|
|
|
|
ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
|
2018-10-05 22:11:43 +08:00
|
|
|
&cfg->ext_clk);
|
2018-09-26 10:42:18 +08:00
|
|
|
if (ret) {
|
|
|
|
|
dev_err(dev, "can't get clock frequency");
|
|
|
|
|
goto out_err;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
dev_dbg(dev, "ext clk: %d", cfg->ext_clk);
|
|
|
|
|
if (cfg->ext_clk != IMX319_EXT_CLK) {
|
|
|
|
|
dev_err(dev, "external clock %d is not supported",
|
2018-10-05 22:11:43 +08:00
|
|
|
cfg->ext_clk);
|
2018-09-26 10:42:18 +08:00
|
|
|
goto out_err;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
dev_dbg(dev, "num of link freqs: %d", bus_cfg.nr_of_link_frequencies);
|
|
|
|
|
if (!bus_cfg.nr_of_link_frequencies) {
|
|
|
|
|
dev_warn(dev, "no link frequencies defined");
|
|
|
|
|
goto out_err;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
cfg->nr_of_link_freqs = bus_cfg.nr_of_link_frequencies;
|
2018-10-05 22:11:43 +08:00
|
|
|
cfg->link_freqs = devm_kcalloc(dev,
|
|
|
|
|
bus_cfg.nr_of_link_frequencies + 1,
|
|
|
|
|
sizeof(*cfg->link_freqs), GFP_KERNEL);
|
2018-09-26 10:42:18 +08:00
|
|
|
if (!cfg->link_freqs)
|
|
|
|
|
goto out_err;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) {
|
|
|
|
|
cfg->link_freqs[i] = bus_cfg.link_frequencies[i];
|
|
|
|
|
dev_dbg(dev, "link_freq[%d] = %lld", i, cfg->link_freqs[i]);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
v4l2_fwnode_endpoint_free(&bus_cfg);
|
|
|
|
|
fwnode_handle_put(ep);
|
|
|
|
|
return cfg;
|
|
|
|
|
|
|
|
|
|
out_err:
|
|
|
|
|
v4l2_fwnode_endpoint_free(&bus_cfg);
|
|
|
|
|
fwnode_handle_put(ep);
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int imx319_probe(struct i2c_client *client)
|
|
|
|
|
{
|
|
|
|
|
struct imx319 *imx319;
|
2021-10-18 20:17:28 +08:00
|
|
|
bool full_power;
|
2018-09-26 10:42:18 +08:00
|
|
|
int ret;
|
|
|
|
|
u32 i;
|
|
|
|
|
|
|
|
|
|
imx319 = devm_kzalloc(&client->dev, sizeof(*imx319), GFP_KERNEL);
|
|
|
|
|
if (!imx319)
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
|
|
mutex_init(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
/* Initialize subdev */
|
|
|
|
|
v4l2_i2c_subdev_init(&imx319->sd, client, &imx319_subdev_ops);
|
|
|
|
|
|
2021-10-18 20:17:28 +08:00
|
|
|
full_power = acpi_dev_state_d0(&client->dev);
|
|
|
|
|
if (full_power) {
|
|
|
|
|
/* Check module identity */
|
|
|
|
|
ret = imx319_identify_module(imx319);
|
|
|
|
|
if (ret) {
|
|
|
|
|
dev_err(&client->dev, "failed to find sensor: %d", ret);
|
|
|
|
|
goto error_probe;
|
|
|
|
|
}
|
2018-09-26 10:42:18 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
imx319->hwcfg = imx319_get_hwcfg(&client->dev);
|
|
|
|
|
if (!imx319->hwcfg) {
|
|
|
|
|
dev_err(&client->dev, "failed to get hwcfg");
|
|
|
|
|
ret = -ENODEV;
|
|
|
|
|
goto error_probe;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
imx319->link_def_freq = link_freq_menu_items[IMX319_LINK_FREQ_INDEX];
|
|
|
|
|
for (i = 0; i < imx319->hwcfg->nr_of_link_freqs; i++) {
|
|
|
|
|
if (imx319->hwcfg->link_freqs[i] == imx319->link_def_freq) {
|
|
|
|
|
dev_dbg(&client->dev, "link freq index %d matched", i);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (i == imx319->hwcfg->nr_of_link_freqs) {
|
|
|
|
|
dev_err(&client->dev, "no link frequency supported");
|
|
|
|
|
ret = -EINVAL;
|
|
|
|
|
goto error_probe;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Set default mode to max resolution */
|
|
|
|
|
imx319->cur_mode = &supported_modes[0];
|
|
|
|
|
|
|
|
|
|
ret = imx319_init_controls(imx319);
|
|
|
|
|
if (ret) {
|
|
|
|
|
dev_err(&client->dev, "failed to init controls: %d", ret);
|
|
|
|
|
goto error_probe;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Initialize subdev */
|
|
|
|
|
imx319->sd.internal_ops = &imx319_internal_ops;
|
|
|
|
|
imx319->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
|
|
|
|
|
V4L2_SUBDEV_FL_HAS_EVENTS;
|
|
|
|
|
imx319->sd.entity.ops = &imx319_subdev_entity_ops;
|
|
|
|
|
imx319->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
|
|
|
|
|
|
|
|
/* Initialize source pad */
|
|
|
|
|
imx319->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
|
|
|
ret = media_entity_pads_init(&imx319->sd.entity, 1, &imx319->pad);
|
|
|
|
|
if (ret) {
|
|
|
|
|
dev_err(&client->dev, "failed to init entity pads: %d", ret);
|
|
|
|
|
goto error_handler_free;
|
|
|
|
|
}
|
|
|
|
|
|
2021-03-06 00:42:34 +08:00
|
|
|
ret = v4l2_async_register_subdev_sensor(&imx319->sd);
|
2018-09-26 10:42:18 +08:00
|
|
|
if (ret < 0)
|
|
|
|
|
goto error_media_entity;
|
|
|
|
|
|
2021-10-18 20:17:28 +08:00
|
|
|
/* Set the device's state to active if it's in D0 state. */
|
|
|
|
|
if (full_power)
|
|
|
|
|
pm_runtime_set_active(&client->dev);
|
2018-09-26 10:42:18 +08:00
|
|
|
pm_runtime_enable(&client->dev);
|
|
|
|
|
pm_runtime_idle(&client->dev);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
error_media_entity:
|
|
|
|
|
media_entity_cleanup(&imx319->sd.entity);
|
|
|
|
|
|
|
|
|
|
error_handler_free:
|
|
|
|
|
v4l2_ctrl_handler_free(imx319->sd.ctrl_handler);
|
|
|
|
|
|
|
|
|
|
error_probe:
|
|
|
|
|
mutex_destroy(&imx319->mutex);
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
2022-08-15 16:02:30 +08:00
|
|
|
static void imx319_remove(struct i2c_client *client)
|
2018-09-26 10:42:18 +08:00
|
|
|
{
|
|
|
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
|
|
|
struct imx319 *imx319 = to_imx319(sd);
|
|
|
|
|
|
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
|
|
|
media_entity_cleanup(&sd->entity);
|
|
|
|
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
|
|
|
|
|
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
|
|
|
pm_runtime_set_suspended(&client->dev);
|
|
|
|
|
|
|
|
|
|
mutex_destroy(&imx319->mutex);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const struct dev_pm_ops imx319_pm_ops = {
|
|
|
|
|
SET_SYSTEM_SLEEP_PM_OPS(imx319_suspend, imx319_resume)
|
|
|
|
|
};
|
|
|
|
|
|
2020-09-22 00:23:22 +08:00
|
|
|
static const struct acpi_device_id imx319_acpi_ids[] __maybe_unused = {
|
2018-09-26 10:42:18 +08:00
|
|
|
{ "SONY319A" },
|
|
|
|
|
{ /* sentinel */ }
|
|
|
|
|
};
|
|
|
|
|
MODULE_DEVICE_TABLE(acpi, imx319_acpi_ids);
|
|
|
|
|
|
|
|
|
|
static struct i2c_driver imx319_i2c_driver = {
|
|
|
|
|
.driver = {
|
|
|
|
|
.name = "imx319",
|
|
|
|
|
.pm = &imx319_pm_ops,
|
|
|
|
|
.acpi_match_table = ACPI_PTR(imx319_acpi_ids),
|
|
|
|
|
},
|
|
|
|
|
.probe_new = imx319_probe,
|
|
|
|
|
.remove = imx319_remove,
|
2021-10-18 20:17:28 +08:00
|
|
|
.flags = I2C_DRV_ACPI_WAIVE_D0_PROBE,
|
2018-09-26 10:42:18 +08:00
|
|
|
};
|
|
|
|
|
module_i2c_driver(imx319_i2c_driver);
|
|
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Qiu, Tianshu <tian.shu.qiu@intel.com>");
|
|
|
|
|
MODULE_AUTHOR("Rapolu, Chiranjeevi <chiranjeevi.rapolu@intel.com>");
|
|
|
|
|
MODULE_AUTHOR("Bingbu Cao <bingbu.cao@intel.com>");
|
2021-12-15 00:13:31 +08:00
|
|
|
MODULE_AUTHOR("Yang, Hyungwoo");
|
2018-09-26 10:42:18 +08:00
|
|
|
MODULE_DESCRIPTION("Sony imx319 sensor driver");
|
|
|
|
|
MODULE_LICENSE("GPL v2");
|
