License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2008-04-29 16:00:10 +08:00
|
|
|
/*
|
2008-10-19 11:28:07 +08:00
|
|
|
* device_cgroup.c - device cgroup subsystem
|
2008-04-29 16:00:10 +08:00
|
|
|
*
|
|
|
|
* Copyright 2007 IBM Corp
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/device_cgroup.h>
|
|
|
|
#include <linux/cgroup.h>
|
|
|
|
#include <linux/ctype.h>
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/uaccess.h>
|
2008-04-29 16:00:14 +08:00
|
|
|
#include <linux/seq_file.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
|
|
|
#include <linux/slab.h>
|
2008-10-19 11:28:07 +08:00
|
|
|
#include <linux/rcupdate.h>
|
2009-04-03 07:57:32 +08:00
|
|
|
#include <linux/mutex.h>
|
2008-04-29 16:00:10 +08:00
|
|
|
|
2009-04-03 07:57:32 +08:00
|
|
|
static DEFINE_MUTEX(devcgroup_mutex);
|
|
|
|
|
2013-02-16 00:55:45 +08:00
|
|
|
enum devcg_behavior {
|
|
|
|
DEVCG_DEFAULT_NONE,
|
|
|
|
DEVCG_DEFAULT_ALLOW,
|
|
|
|
DEVCG_DEFAULT_DENY,
|
|
|
|
};
|
|
|
|
|
2008-04-29 16:00:10 +08:00
|
|
|
/*
|
2012-10-05 08:15:20 +08:00
|
|
|
* exception list locking rules:
|
2009-04-03 07:57:32 +08:00
|
|
|
* hold devcgroup_mutex for update/read.
|
2008-10-19 11:28:07 +08:00
|
|
|
* hold rcu_read_lock() for read.
|
2008-04-29 16:00:10 +08:00
|
|
|
*/
|
|
|
|
|
2012-10-05 08:15:20 +08:00
|
|
|
struct dev_exception_item {
|
2008-04-29 16:00:10 +08:00
|
|
|
u32 major, minor;
|
|
|
|
short type;
|
|
|
|
short access;
|
|
|
|
struct list_head list;
|
devcgroup: relax white-list protection down to RCU
Currently this list is protected with a simple spinlock, even for reading
from one. This is OK, but can be better.
Actually I want it to be better very much, since after replacing the
OpenVZ device permissions engine with the cgroup-based one I noticed, that
we set 12 default device permissions for each newly created container (for
/dev/null, full, terminals, ect devices), and people sometimes have up to
20 perms more, so traversing the ~30-40 elements list under a spinlock
doesn't seem very good.
Here's the RCU protection for white-list - dev_whitelist_item-s are added
and removed under the devcg->lock, but are looked up in permissions
checking under the rcu_read_lock.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:47:07 +08:00
|
|
|
struct rcu_head rcu;
|
2008-04-29 16:00:10 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct dev_cgroup {
|
|
|
|
struct cgroup_subsys_state css;
|
2012-10-05 08:15:20 +08:00
|
|
|
struct list_head exceptions;
|
2013-02-16 00:55:45 +08:00
|
|
|
enum devcg_behavior behavior;
|
2008-04-29 16:00:10 +08:00
|
|
|
};
|
|
|
|
|
2008-06-06 13:46:24 +08:00
|
|
|
static inline struct dev_cgroup *css_to_devcgroup(struct cgroup_subsys_state *s)
|
|
|
|
{
|
2013-08-09 08:11:23 +08:00
|
|
|
return s ? container_of(s, struct dev_cgroup, css) : NULL;
|
2008-06-06 13:46:24 +08:00
|
|
|
}
|
|
|
|
|
2008-07-25 16:47:03 +08:00
|
|
|
static inline struct dev_cgroup *task_devcgroup(struct task_struct *task)
|
|
|
|
{
|
2014-02-08 23:36:58 +08:00
|
|
|
return css_to_devcgroup(task_css(task, devices_cgrp_id));
|
2008-07-25 16:47:03 +08:00
|
|
|
}
|
|
|
|
|
2008-04-29 16:00:10 +08:00
|
|
|
/*
|
2009-04-03 07:57:32 +08:00
|
|
|
* called under devcgroup_mutex
|
2008-04-29 16:00:10 +08:00
|
|
|
*/
|
2012-10-05 08:15:20 +08:00
|
|
|
static int dev_exceptions_copy(struct list_head *dest, struct list_head *orig)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
2012-10-05 08:15:20 +08:00
|
|
|
struct dev_exception_item *ex, *tmp, *new;
|
2008-04-29 16:00:10 +08:00
|
|
|
|
2012-11-07 01:16:53 +08:00
|
|
|
lockdep_assert_held(&devcgroup_mutex);
|
|
|
|
|
2012-10-05 08:15:20 +08:00
|
|
|
list_for_each_entry(ex, orig, list) {
|
|
|
|
new = kmemdup(ex, sizeof(*ex), GFP_KERNEL);
|
2008-04-29 16:00:10 +08:00
|
|
|
if (!new)
|
|
|
|
goto free_and_exit;
|
|
|
|
list_add_tail(&new->list, dest);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
free_and_exit:
|
2012-10-05 08:15:20 +08:00
|
|
|
list_for_each_entry_safe(ex, tmp, dest, list) {
|
|
|
|
list_del(&ex->list);
|
|
|
|
kfree(ex);
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2009-04-03 07:57:32 +08:00
|
|
|
* called under devcgroup_mutex
|
2008-04-29 16:00:10 +08:00
|
|
|
*/
|
2012-10-05 08:15:20 +08:00
|
|
|
static int dev_exception_add(struct dev_cgroup *dev_cgroup,
|
|
|
|
struct dev_exception_item *ex)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
2012-10-05 08:15:20 +08:00
|
|
|
struct dev_exception_item *excopy, *walk;
|
2008-04-29 16:00:10 +08:00
|
|
|
|
2012-11-07 01:16:53 +08:00
|
|
|
lockdep_assert_held(&devcgroup_mutex);
|
|
|
|
|
2012-10-05 08:15:20 +08:00
|
|
|
excopy = kmemdup(ex, sizeof(*ex), GFP_KERNEL);
|
|
|
|
if (!excopy)
|
2008-04-29 16:00:10 +08:00
|
|
|
return -ENOMEM;
|
|
|
|
|
2012-10-05 08:15:20 +08:00
|
|
|
list_for_each_entry(walk, &dev_cgroup->exceptions, list) {
|
|
|
|
if (walk->type != ex->type)
|
2008-06-06 13:46:28 +08:00
|
|
|
continue;
|
2012-10-05 08:15:20 +08:00
|
|
|
if (walk->major != ex->major)
|
2008-06-06 13:46:28 +08:00
|
|
|
continue;
|
2012-10-05 08:15:20 +08:00
|
|
|
if (walk->minor != ex->minor)
|
2008-06-06 13:46:28 +08:00
|
|
|
continue;
|
|
|
|
|
2012-10-05 08:15:20 +08:00
|
|
|
walk->access |= ex->access;
|
|
|
|
kfree(excopy);
|
|
|
|
excopy = NULL;
|
2008-06-06 13:46:28 +08:00
|
|
|
}
|
|
|
|
|
2012-10-05 08:15:20 +08:00
|
|
|
if (excopy != NULL)
|
|
|
|
list_add_tail_rcu(&excopy->list, &dev_cgroup->exceptions);
|
2008-04-29 16:00:10 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2009-04-03 07:57:32 +08:00
|
|
|
* called under devcgroup_mutex
|
2008-04-29 16:00:10 +08:00
|
|
|
*/
|
2012-10-05 08:15:20 +08:00
|
|
|
static void dev_exception_rm(struct dev_cgroup *dev_cgroup,
|
|
|
|
struct dev_exception_item *ex)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
2012-10-05 08:15:20 +08:00
|
|
|
struct dev_exception_item *walk, *tmp;
|
2008-04-29 16:00:10 +08:00
|
|
|
|
2012-11-07 01:16:53 +08:00
|
|
|
lockdep_assert_held(&devcgroup_mutex);
|
|
|
|
|
2012-10-05 08:15:20 +08:00
|
|
|
list_for_each_entry_safe(walk, tmp, &dev_cgroup->exceptions, list) {
|
|
|
|
if (walk->type != ex->type)
|
2008-04-29 16:00:10 +08:00
|
|
|
continue;
|
2012-10-05 08:15:20 +08:00
|
|
|
if (walk->major != ex->major)
|
2008-04-29 16:00:10 +08:00
|
|
|
continue;
|
2012-10-05 08:15:20 +08:00
|
|
|
if (walk->minor != ex->minor)
|
2008-04-29 16:00:10 +08:00
|
|
|
continue;
|
|
|
|
|
2012-10-05 08:15:20 +08:00
|
|
|
walk->access &= ~ex->access;
|
2008-04-29 16:00:10 +08:00
|
|
|
if (!walk->access) {
|
devcgroup: relax white-list protection down to RCU
Currently this list is protected with a simple spinlock, even for reading
from one. This is OK, but can be better.
Actually I want it to be better very much, since after replacing the
OpenVZ device permissions engine with the cgroup-based one I noticed, that
we set 12 default device permissions for each newly created container (for
/dev/null, full, terminals, ect devices), and people sometimes have up to
20 perms more, so traversing the ~30-40 elements list under a spinlock
doesn't seem very good.
Here's the RCU protection for white-list - dev_whitelist_item-s are added
and removed under the devcg->lock, but are looked up in permissions
checking under the rcu_read_lock.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:47:07 +08:00
|
|
|
list_del_rcu(&walk->list);
|
2011-03-15 18:07:57 +08:00
|
|
|
kfree_rcu(walk, rcu);
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-02-22 08:41:31 +08:00
|
|
|
static void __dev_exception_clean(struct dev_cgroup *dev_cgroup)
|
|
|
|
{
|
|
|
|
struct dev_exception_item *ex, *tmp;
|
|
|
|
|
|
|
|
list_for_each_entry_safe(ex, tmp, &dev_cgroup->exceptions, list) {
|
|
|
|
list_del_rcu(&ex->list);
|
|
|
|
kfree_rcu(ex, rcu);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-05 08:15:15 +08:00
|
|
|
/**
|
2012-10-05 08:15:20 +08:00
|
|
|
* dev_exception_clean - frees all entries of the exception list
|
|
|
|
* @dev_cgroup: dev_cgroup with the exception list to be cleaned
|
2012-10-05 08:15:15 +08:00
|
|
|
*
|
|
|
|
* called under devcgroup_mutex
|
|
|
|
*/
|
2012-10-05 08:15:20 +08:00
|
|
|
static void dev_exception_clean(struct dev_cgroup *dev_cgroup)
|
2012-10-05 08:15:15 +08:00
|
|
|
{
|
2012-11-07 01:16:53 +08:00
|
|
|
lockdep_assert_held(&devcgroup_mutex);
|
|
|
|
|
2013-02-22 08:41:31 +08:00
|
|
|
__dev_exception_clean(dev_cgroup);
|
2012-10-05 08:15:15 +08:00
|
|
|
}
|
|
|
|
|
2013-02-16 00:55:47 +08:00
|
|
|
static inline bool is_devcg_online(const struct dev_cgroup *devcg)
|
|
|
|
{
|
|
|
|
return (devcg->behavior != DEVCG_DEFAULT_NONE);
|
|
|
|
}
|
|
|
|
|
2013-02-16 00:55:46 +08:00
|
|
|
/**
|
|
|
|
* devcgroup_online - initializes devcgroup's behavior and exceptions based on
|
|
|
|
* parent's
|
2013-08-09 08:11:23 +08:00
|
|
|
* @css: css getting online
|
2013-02-16 00:55:46 +08:00
|
|
|
* returns 0 in case of success, error code otherwise
|
|
|
|
*/
|
2013-08-09 08:11:23 +08:00
|
|
|
static int devcgroup_online(struct cgroup_subsys_state *css)
|
2013-02-16 00:55:46 +08:00
|
|
|
{
|
2013-08-09 08:11:23 +08:00
|
|
|
struct dev_cgroup *dev_cgroup = css_to_devcgroup(css);
|
2014-05-17 01:22:48 +08:00
|
|
|
struct dev_cgroup *parent_dev_cgroup = css_to_devcgroup(css->parent);
|
2013-02-16 00:55:46 +08:00
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
mutex_lock(&devcgroup_mutex);
|
|
|
|
|
|
|
|
if (parent_dev_cgroup == NULL)
|
|
|
|
dev_cgroup->behavior = DEVCG_DEFAULT_ALLOW;
|
|
|
|
else {
|
|
|
|
ret = dev_exceptions_copy(&dev_cgroup->exceptions,
|
|
|
|
&parent_dev_cgroup->exceptions);
|
|
|
|
if (!ret)
|
|
|
|
dev_cgroup->behavior = parent_dev_cgroup->behavior;
|
|
|
|
}
|
|
|
|
mutex_unlock(&devcgroup_mutex);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2013-08-09 08:11:23 +08:00
|
|
|
static void devcgroup_offline(struct cgroup_subsys_state *css)
|
2013-02-16 00:55:46 +08:00
|
|
|
{
|
2013-08-09 08:11:23 +08:00
|
|
|
struct dev_cgroup *dev_cgroup = css_to_devcgroup(css);
|
2013-02-16 00:55:46 +08:00
|
|
|
|
|
|
|
mutex_lock(&devcgroup_mutex);
|
|
|
|
dev_cgroup->behavior = DEVCG_DEFAULT_NONE;
|
|
|
|
mutex_unlock(&devcgroup_mutex);
|
|
|
|
}
|
|
|
|
|
2008-04-29 16:00:10 +08:00
|
|
|
/*
|
|
|
|
* called from kernel/cgroup.c with cgroup_lock() held.
|
|
|
|
*/
|
2013-08-09 08:11:23 +08:00
|
|
|
static struct cgroup_subsys_state *
|
|
|
|
devcgroup_css_alloc(struct cgroup_subsys_state *parent_css)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
2013-02-16 00:55:46 +08:00
|
|
|
struct dev_cgroup *dev_cgroup;
|
2008-04-29 16:00:10 +08:00
|
|
|
|
|
|
|
dev_cgroup = kzalloc(sizeof(*dev_cgroup), GFP_KERNEL);
|
|
|
|
if (!dev_cgroup)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
2012-10-05 08:15:20 +08:00
|
|
|
INIT_LIST_HEAD(&dev_cgroup->exceptions);
|
2013-02-16 00:55:46 +08:00
|
|
|
dev_cgroup->behavior = DEVCG_DEFAULT_NONE;
|
2008-04-29 16:00:10 +08:00
|
|
|
|
|
|
|
return &dev_cgroup->css;
|
|
|
|
}
|
|
|
|
|
2013-08-09 08:11:23 +08:00
|
|
|
static void devcgroup_css_free(struct cgroup_subsys_state *css)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
2013-08-09 08:11:23 +08:00
|
|
|
struct dev_cgroup *dev_cgroup = css_to_devcgroup(css);
|
2008-04-29 16:00:10 +08:00
|
|
|
|
2013-02-22 08:41:31 +08:00
|
|
|
__dev_exception_clean(dev_cgroup);
|
2008-04-29 16:00:10 +08:00
|
|
|
kfree(dev_cgroup);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define DEVCG_ALLOW 1
|
|
|
|
#define DEVCG_DENY 2
|
2008-04-29 16:00:14 +08:00
|
|
|
#define DEVCG_LIST 3
|
|
|
|
|
2008-07-14 03:14:02 +08:00
|
|
|
#define MAJMINLEN 13
|
2008-04-29 16:00:14 +08:00
|
|
|
#define ACCLEN 4
|
2008-04-29 16:00:10 +08:00
|
|
|
|
|
|
|
static void set_access(char *acc, short access)
|
|
|
|
{
|
|
|
|
int idx = 0;
|
2008-04-29 16:00:14 +08:00
|
|
|
memset(acc, 0, ACCLEN);
|
2017-11-05 21:15:30 +08:00
|
|
|
if (access & DEVCG_ACC_READ)
|
2008-04-29 16:00:10 +08:00
|
|
|
acc[idx++] = 'r';
|
2017-11-05 21:15:30 +08:00
|
|
|
if (access & DEVCG_ACC_WRITE)
|
2008-04-29 16:00:10 +08:00
|
|
|
acc[idx++] = 'w';
|
2017-11-05 21:15:30 +08:00
|
|
|
if (access & DEVCG_ACC_MKNOD)
|
2008-04-29 16:00:10 +08:00
|
|
|
acc[idx++] = 'm';
|
|
|
|
}
|
|
|
|
|
|
|
|
static char type_to_char(short type)
|
|
|
|
{
|
2017-11-05 21:15:30 +08:00
|
|
|
if (type == DEVCG_DEV_ALL)
|
2008-04-29 16:00:10 +08:00
|
|
|
return 'a';
|
2017-11-05 21:15:30 +08:00
|
|
|
if (type == DEVCG_DEV_CHAR)
|
2008-04-29 16:00:10 +08:00
|
|
|
return 'c';
|
2017-11-05 21:15:30 +08:00
|
|
|
if (type == DEVCG_DEV_BLOCK)
|
2008-04-29 16:00:10 +08:00
|
|
|
return 'b';
|
|
|
|
return 'X';
|
|
|
|
}
|
|
|
|
|
2008-04-29 16:00:14 +08:00
|
|
|
static void set_majmin(char *str, unsigned m)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
|
|
|
if (m == ~0)
|
2008-07-25 16:47:08 +08:00
|
|
|
strcpy(str, "*");
|
2008-04-29 16:00:10 +08:00
|
|
|
else
|
2008-07-25 16:47:08 +08:00
|
|
|
sprintf(str, "%u", m);
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
|
|
|
|
2013-12-06 01:28:04 +08:00
|
|
|
static int devcgroup_seq_show(struct seq_file *m, void *v)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
2013-12-06 01:28:04 +08:00
|
|
|
struct dev_cgroup *devcgroup = css_to_devcgroup(seq_css(m));
|
2012-10-05 08:15:20 +08:00
|
|
|
struct dev_exception_item *ex;
|
2008-04-29 16:00:14 +08:00
|
|
|
char maj[MAJMINLEN], min[MAJMINLEN], acc[ACCLEN];
|
2008-04-29 16:00:10 +08:00
|
|
|
|
devcgroup: relax white-list protection down to RCU
Currently this list is protected with a simple spinlock, even for reading
from one. This is OK, but can be better.
Actually I want it to be better very much, since after replacing the
OpenVZ device permissions engine with the cgroup-based one I noticed, that
we set 12 default device permissions for each newly created container (for
/dev/null, full, terminals, ect devices), and people sometimes have up to
20 perms more, so traversing the ~30-40 elements list under a spinlock
doesn't seem very good.
Here's the RCU protection for white-list - dev_whitelist_item-s are added
and removed under the devcg->lock, but are looked up in permissions
checking under the rcu_read_lock.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:47:07 +08:00
|
|
|
rcu_read_lock();
|
2012-10-05 08:15:17 +08:00
|
|
|
/*
|
|
|
|
* To preserve the compatibility:
|
|
|
|
* - Only show the "all devices" when the default policy is to allow
|
|
|
|
* - List the exceptions in case the default policy is to deny
|
|
|
|
* This way, the file remains as a "whitelist of devices"
|
|
|
|
*/
|
2012-10-26 04:37:38 +08:00
|
|
|
if (devcgroup->behavior == DEVCG_DEFAULT_ALLOW) {
|
2017-11-05 21:15:30 +08:00
|
|
|
set_access(acc, DEVCG_ACC_MASK);
|
2012-10-05 08:15:17 +08:00
|
|
|
set_majmin(maj, ~0);
|
|
|
|
set_majmin(min, ~0);
|
2017-11-05 21:15:30 +08:00
|
|
|
seq_printf(m, "%c %s:%s %s\n", type_to_char(DEVCG_DEV_ALL),
|
2008-04-29 16:00:14 +08:00
|
|
|
maj, min, acc);
|
2012-10-05 08:15:17 +08:00
|
|
|
} else {
|
2012-10-05 08:15:20 +08:00
|
|
|
list_for_each_entry_rcu(ex, &devcgroup->exceptions, list) {
|
|
|
|
set_access(acc, ex->access);
|
|
|
|
set_majmin(maj, ex->major);
|
|
|
|
set_majmin(min, ex->minor);
|
|
|
|
seq_printf(m, "%c %s:%s %s\n", type_to_char(ex->type),
|
2012-10-05 08:15:17 +08:00
|
|
|
maj, min, acc);
|
|
|
|
}
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
devcgroup: relax white-list protection down to RCU
Currently this list is protected with a simple spinlock, even for reading
from one. This is OK, but can be better.
Actually I want it to be better very much, since after replacing the
OpenVZ device permissions engine with the cgroup-based one I noticed, that
we set 12 default device permissions for each newly created container (for
/dev/null, full, terminals, ect devices), and people sometimes have up to
20 perms more, so traversing the ~30-40 elements list under a spinlock
doesn't seem very good.
Here's the RCU protection for white-list - dev_whitelist_item-s are added
and removed under the devcg->lock, but are looked up in permissions
checking under the rcu_read_lock.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:47:07 +08:00
|
|
|
rcu_read_unlock();
|
2008-04-29 16:00:10 +08:00
|
|
|
|
2008-04-29 16:00:14 +08:00
|
|
|
return 0;
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
|
|
|
|
2012-10-05 08:15:17 +08:00
|
|
|
/**
|
2014-04-25 03:33:21 +08:00
|
|
|
* match_exception - iterates the exception list trying to find a complete match
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
* @exceptions: list of exceptions
|
2017-11-05 21:15:30 +08:00
|
|
|
* @type: device type (DEVCG_DEV_BLOCK or DEVCG_DEV_CHAR)
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
* @major: device file major number, ~0 to match all
|
|
|
|
* @minor: device file minor number, ~0 to match all
|
2017-11-05 21:15:30 +08:00
|
|
|
* @access: permission mask (DEVCG_ACC_READ, DEVCG_ACC_WRITE, DEVCG_ACC_MKNOD)
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
*
|
2014-04-25 03:33:21 +08:00
|
|
|
* It is considered a complete match if an exception is found that will
|
|
|
|
* contain the entire range of provided parameters.
|
|
|
|
*
|
|
|
|
* Return: true in case it matches an exception completely
|
2008-04-29 16:00:10 +08:00
|
|
|
*/
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
static bool match_exception(struct list_head *exceptions, short type,
|
|
|
|
u32 major, u32 minor, short access)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
2012-10-05 08:15:20 +08:00
|
|
|
struct dev_exception_item *ex;
|
2008-04-29 16:00:10 +08:00
|
|
|
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
list_for_each_entry_rcu(ex, exceptions, list) {
|
2017-11-05 21:15:30 +08:00
|
|
|
if ((type & DEVCG_DEV_BLOCK) && !(ex->type & DEVCG_DEV_BLOCK))
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
continue;
|
2017-11-05 21:15:30 +08:00
|
|
|
if ((type & DEVCG_DEV_CHAR) && !(ex->type & DEVCG_DEV_CHAR))
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
continue;
|
|
|
|
if (ex->major != ~0 && ex->major != major)
|
|
|
|
continue;
|
|
|
|
if (ex->minor != ~0 && ex->minor != minor)
|
|
|
|
continue;
|
|
|
|
/* provided access cannot have more than the exception rule */
|
|
|
|
if (access & (~ex->access))
|
|
|
|
continue;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2014-04-25 03:33:21 +08:00
|
|
|
* match_exception_partial - iterates the exception list trying to find a partial match
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
* @exceptions: list of exceptions
|
2017-11-05 21:15:30 +08:00
|
|
|
* @type: device type (DEVCG_DEV_BLOCK or DEVCG_DEV_CHAR)
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
* @major: device file major number, ~0 to match all
|
|
|
|
* @minor: device file minor number, ~0 to match all
|
2017-11-05 21:15:30 +08:00
|
|
|
* @access: permission mask (DEVCG_ACC_READ, DEVCG_ACC_WRITE, DEVCG_ACC_MKNOD)
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
*
|
2014-04-25 03:33:21 +08:00
|
|
|
* It is considered a partial match if an exception's range is found to
|
|
|
|
* contain *any* of the devices specified by provided parameters. This is
|
|
|
|
* used to make sure no extra access is being granted that is forbidden by
|
|
|
|
* any of the exception list.
|
|
|
|
*
|
|
|
|
* Return: true in case the provided range mat matches an exception completely
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
*/
|
|
|
|
static bool match_exception_partial(struct list_head *exceptions, short type,
|
|
|
|
u32 major, u32 minor, short access)
|
|
|
|
{
|
|
|
|
struct dev_exception_item *ex;
|
2012-11-07 01:16:53 +08:00
|
|
|
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
list_for_each_entry_rcu(ex, exceptions, list) {
|
2017-11-05 21:15:30 +08:00
|
|
|
if ((type & DEVCG_DEV_BLOCK) && !(ex->type & DEVCG_DEV_BLOCK))
|
2008-04-29 16:00:10 +08:00
|
|
|
continue;
|
2017-11-05 21:15:30 +08:00
|
|
|
if ((type & DEVCG_DEV_CHAR) && !(ex->type & DEVCG_DEV_CHAR))
|
2008-04-29 16:00:10 +08:00
|
|
|
continue;
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
/*
|
|
|
|
* We must be sure that both the exception and the provided
|
|
|
|
* range aren't masking all devices
|
|
|
|
*/
|
|
|
|
if (ex->major != ~0 && major != ~0 && ex->major != major)
|
2008-04-29 16:00:10 +08:00
|
|
|
continue;
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
if (ex->minor != ~0 && minor != ~0 && ex->minor != minor)
|
2008-04-29 16:00:10 +08:00
|
|
|
continue;
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
/*
|
|
|
|
* In order to make sure the provided range isn't matching
|
|
|
|
* an exception, all its access bits shouldn't match the
|
|
|
|
* exception's access bits
|
|
|
|
*/
|
|
|
|
if (!(access & ex->access))
|
2008-04-29 16:00:10 +08:00
|
|
|
continue;
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
return true;
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2014-04-25 03:33:21 +08:00
|
|
|
* verify_new_ex - verifies if a new exception is allowed by parent cgroup's permissions
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
* @dev_cgroup: dev cgroup to be tested against
|
|
|
|
* @refex: new exception
|
|
|
|
* @behavior: behavior of the exception's dev_cgroup
|
2014-04-25 03:33:21 +08:00
|
|
|
*
|
|
|
|
* This is used to make sure a child cgroup won't have more privileges
|
|
|
|
* than its parent
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
*/
|
|
|
|
static bool verify_new_ex(struct dev_cgroup *dev_cgroup,
|
|
|
|
struct dev_exception_item *refex,
|
|
|
|
enum devcg_behavior behavior)
|
|
|
|
{
|
|
|
|
bool match = false;
|
|
|
|
|
2015-06-19 06:50:02 +08:00
|
|
|
RCU_LOCKDEP_WARN(!rcu_read_lock_held() &&
|
2015-09-03 08:11:22 +08:00
|
|
|
!lockdep_is_held(&devcgroup_mutex),
|
2015-06-19 06:50:02 +08:00
|
|
|
"device_cgroup:verify_new_ex called without proper synchronization");
|
2012-10-05 08:15:17 +08:00
|
|
|
|
2013-02-16 00:55:45 +08:00
|
|
|
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
|
|
|
|
if (behavior == DEVCG_DEFAULT_ALLOW) {
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
/*
|
|
|
|
* new exception in the child doesn't matter, only
|
|
|
|
* adding extra restrictions
|
|
|
|
*/
|
2013-02-16 00:55:45 +08:00
|
|
|
return true;
|
|
|
|
} else {
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
/*
|
|
|
|
* new exception in the child will add more devices
|
|
|
|
* that can be acessed, so it can't match any of
|
|
|
|
* parent's exceptions, even slightly
|
|
|
|
*/
|
|
|
|
match = match_exception_partial(&dev_cgroup->exceptions,
|
|
|
|
refex->type,
|
|
|
|
refex->major,
|
|
|
|
refex->minor,
|
|
|
|
refex->access);
|
|
|
|
|
2013-02-16 00:55:45 +08:00
|
|
|
if (match)
|
|
|
|
return false;
|
2013-02-16 00:55:44 +08:00
|
|
|
return true;
|
2013-02-16 00:55:45 +08:00
|
|
|
}
|
2013-02-16 00:55:44 +08:00
|
|
|
} else {
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
/*
|
|
|
|
* Only behavior == DEVCG_DEFAULT_DENY allowed here, therefore
|
|
|
|
* the new exception will add access to more devices and must
|
|
|
|
* be contained completely in an parent's exception to be
|
|
|
|
* allowed
|
|
|
|
*/
|
|
|
|
match = match_exception(&dev_cgroup->exceptions, refex->type,
|
|
|
|
refex->major, refex->minor,
|
|
|
|
refex->access);
|
|
|
|
|
2013-02-16 00:55:45 +08:00
|
|
|
if (match)
|
|
|
|
/* parent has an exception that matches the proposed */
|
2013-02-16 00:55:44 +08:00
|
|
|
return true;
|
2013-02-16 00:55:45 +08:00
|
|
|
else
|
|
|
|
return false;
|
2013-02-16 00:55:44 +08:00
|
|
|
}
|
|
|
|
return false;
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* parent_has_perm:
|
2012-10-05 08:15:20 +08:00
|
|
|
* when adding a new allow rule to a device exception list, the rule
|
2008-04-29 16:00:10 +08:00
|
|
|
* must be allowed in the parent device
|
|
|
|
*/
|
2008-07-25 16:47:03 +08:00
|
|
|
static int parent_has_perm(struct dev_cgroup *childcg,
|
2012-10-05 08:15:20 +08:00
|
|
|
struct dev_exception_item *ex)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
2014-05-17 01:22:48 +08:00
|
|
|
struct dev_cgroup *parent = css_to_devcgroup(childcg->css.parent);
|
2008-04-29 16:00:10 +08:00
|
|
|
|
cgroup: add css_parent()
Currently, controllers have to explicitly follow the cgroup hierarchy
to find the parent of a given css. cgroup is moving towards using
cgroup_subsys_state as the main controller interface construct, so
let's provide a way to climb the hierarchy using just csses.
This patch implements css_parent() which, given a css, returns its
parent. The function is guarnateed to valid non-NULL parent css as
long as the target css is not at the top of the hierarchy.
freezer, cpuset, cpu, cpuacct, hugetlb, memory, net_cls and devices
are converted to use css_parent() instead of accessing cgroup->parent
directly.
* __parent_ca() is dropped from cpuacct and its usage is replaced with
parent_ca(). The only difference between the two was NULL test on
cgroup->parent which is now embedded in css_parent() making the
distinction moot. Note that eventually a css->parent field will be
added to css and the NULL check in css_parent() will go away.
This patch shouldn't cause any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-08-09 08:11:23 +08:00
|
|
|
if (!parent)
|
2008-04-29 16:00:10 +08:00
|
|
|
return 1;
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
return verify_new_ex(parent, ex, childcg->behavior);
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
|
|
|
|
2014-05-05 23:18:59 +08:00
|
|
|
/**
|
|
|
|
* parent_allows_removal - verify if it's ok to remove an exception
|
|
|
|
* @childcg: child cgroup from where the exception will be removed
|
|
|
|
* @ex: exception being removed
|
|
|
|
*
|
|
|
|
* When removing an exception in cgroups with default ALLOW policy, it must
|
|
|
|
* be checked if removing it will give the child cgroup more access than the
|
|
|
|
* parent.
|
|
|
|
*
|
|
|
|
* Return: true if it's ok to remove exception, false otherwise
|
|
|
|
*/
|
|
|
|
static bool parent_allows_removal(struct dev_cgroup *childcg,
|
|
|
|
struct dev_exception_item *ex)
|
|
|
|
{
|
2014-05-17 01:22:48 +08:00
|
|
|
struct dev_cgroup *parent = css_to_devcgroup(childcg->css.parent);
|
2014-05-05 23:18:59 +08:00
|
|
|
|
|
|
|
if (!parent)
|
|
|
|
return true;
|
|
|
|
|
|
|
|
/* It's always allowed to remove access to devices */
|
|
|
|
if (childcg->behavior == DEVCG_DEFAULT_DENY)
|
|
|
|
return true;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Make sure you're not removing part or a whole exception existing in
|
|
|
|
* the parent cgroup
|
|
|
|
*/
|
|
|
|
return !match_exception_partial(&parent->exceptions, ex->type,
|
|
|
|
ex->major, ex->minor, ex->access);
|
|
|
|
}
|
|
|
|
|
2012-10-26 04:37:45 +08:00
|
|
|
/**
|
|
|
|
* may_allow_all - checks if it's possible to change the behavior to
|
|
|
|
* allow based on parent's rules.
|
|
|
|
* @parent: device cgroup's parent
|
|
|
|
* returns: != 0 in case it's allowed, 0 otherwise
|
|
|
|
*/
|
|
|
|
static inline int may_allow_all(struct dev_cgroup *parent)
|
|
|
|
{
|
2012-11-06 23:25:04 +08:00
|
|
|
if (!parent)
|
|
|
|
return 1;
|
2012-10-26 04:37:45 +08:00
|
|
|
return parent->behavior == DEVCG_DEFAULT_ALLOW;
|
|
|
|
}
|
|
|
|
|
2013-02-16 00:55:47 +08:00
|
|
|
/**
|
|
|
|
* revalidate_active_exceptions - walks through the active exception list and
|
|
|
|
* revalidates the exceptions based on parent's
|
|
|
|
* behavior and exceptions. The exceptions that
|
|
|
|
* are no longer valid will be removed.
|
|
|
|
* Called with devcgroup_mutex held.
|
|
|
|
* @devcg: cgroup which exceptions will be checked
|
|
|
|
*
|
|
|
|
* This is one of the three key functions for hierarchy implementation.
|
|
|
|
* This function is responsible for re-evaluating all the cgroup's active
|
|
|
|
* exceptions due to a parent's exception change.
|
2019-06-28 00:08:35 +08:00
|
|
|
* Refer to Documentation/admin-guide/cgroup-v1/devices.rst for more details.
|
2013-02-16 00:55:47 +08:00
|
|
|
*/
|
|
|
|
static void revalidate_active_exceptions(struct dev_cgroup *devcg)
|
|
|
|
{
|
|
|
|
struct dev_exception_item *ex;
|
|
|
|
struct list_head *this, *tmp;
|
|
|
|
|
|
|
|
list_for_each_safe(this, tmp, &devcg->exceptions) {
|
|
|
|
ex = container_of(this, struct dev_exception_item, list);
|
|
|
|
if (!parent_has_perm(devcg, ex))
|
|
|
|
dev_exception_rm(devcg, ex);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* propagate_exception - propagates a new exception to the children
|
|
|
|
* @devcg_root: device cgroup that added a new exception
|
|
|
|
* @ex: new exception to be propagated
|
|
|
|
*
|
|
|
|
* returns: 0 in case of success, != 0 in case of error
|
|
|
|
*/
|
|
|
|
static int propagate_exception(struct dev_cgroup *devcg_root,
|
|
|
|
struct dev_exception_item *ex)
|
|
|
|
{
|
2013-08-09 08:11:25 +08:00
|
|
|
struct cgroup_subsys_state *pos;
|
2013-02-16 00:55:47 +08:00
|
|
|
int rc = 0;
|
|
|
|
|
2013-05-24 09:55:38 +08:00
|
|
|
rcu_read_lock();
|
2013-02-16 00:55:47 +08:00
|
|
|
|
2013-08-09 08:11:25 +08:00
|
|
|
css_for_each_descendant_pre(pos, &devcg_root->css) {
|
|
|
|
struct dev_cgroup *devcg = css_to_devcgroup(pos);
|
2013-05-24 09:55:38 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Because devcgroup_mutex is held, no devcg will become
|
|
|
|
* online or offline during the tree walk (see on/offline
|
|
|
|
* methods), and online ones are safe to access outside RCU
|
|
|
|
* read lock without bumping refcnt.
|
|
|
|
*/
|
2013-08-09 08:11:27 +08:00
|
|
|
if (pos == &devcg_root->css || !is_devcg_online(devcg))
|
2013-05-24 09:55:38 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
rcu_read_unlock();
|
2013-02-16 00:55:47 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* in case both root's behavior and devcg is allow, a new
|
|
|
|
* restriction means adding to the exception list
|
|
|
|
*/
|
|
|
|
if (devcg_root->behavior == DEVCG_DEFAULT_ALLOW &&
|
|
|
|
devcg->behavior == DEVCG_DEFAULT_ALLOW) {
|
|
|
|
rc = dev_exception_add(devcg, ex);
|
|
|
|
if (rc)
|
2019-03-19 09:36:59 +08:00
|
|
|
return rc;
|
2013-02-16 00:55:47 +08:00
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* in the other possible cases:
|
|
|
|
* root's behavior: allow, devcg's: deny
|
|
|
|
* root's behavior: deny, devcg's: deny
|
|
|
|
* the exception will be removed
|
|
|
|
*/
|
|
|
|
dev_exception_rm(devcg, ex);
|
|
|
|
}
|
|
|
|
revalidate_active_exceptions(devcg);
|
|
|
|
|
2013-05-24 09:55:38 +08:00
|
|
|
rcu_read_lock();
|
2013-02-16 00:55:47 +08:00
|
|
|
}
|
2013-05-24 09:55:38 +08:00
|
|
|
|
|
|
|
rcu_read_unlock();
|
2013-02-16 00:55:47 +08:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2008-04-29 16:00:10 +08:00
|
|
|
/*
|
2012-10-05 08:15:20 +08:00
|
|
|
* Modify the exception list using allow/deny rules.
|
2008-04-29 16:00:10 +08:00
|
|
|
* CAP_SYS_ADMIN is needed for this. It's at least separate from CAP_MKNOD
|
|
|
|
* so we can give a container CAP_MKNOD to let it create devices but not
|
2012-10-05 08:15:20 +08:00
|
|
|
* modify the exception list.
|
2008-04-29 16:00:10 +08:00
|
|
|
* It seems likely we'll want to add a CAP_CONTAINER capability to allow
|
|
|
|
* us to also grant CAP_SYS_ADMIN to containers without giving away the
|
2012-10-05 08:15:20 +08:00
|
|
|
* device exception list controls, but for now we'll stick with CAP_SYS_ADMIN
|
2008-04-29 16:00:10 +08:00
|
|
|
*
|
|
|
|
* Taking rules away is always allowed (given CAP_SYS_ADMIN). Granting
|
|
|
|
* new access is only allowed if you're in the top-level cgroup, or your
|
|
|
|
* parent cgroup has the access you're asking for.
|
|
|
|
*/
|
2008-07-25 16:47:03 +08:00
|
|
|
static int devcgroup_update_access(struct dev_cgroup *devcgroup,
|
2014-03-19 22:23:54 +08:00
|
|
|
int filetype, char *buffer)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
2008-07-25 16:47:03 +08:00
|
|
|
const char *b;
|
2012-10-26 04:37:41 +08:00
|
|
|
char temp[12]; /* 11 + 1 characters needed for a u32 */
|
2013-02-16 00:55:45 +08:00
|
|
|
int count, rc = 0;
|
2012-10-05 08:15:20 +08:00
|
|
|
struct dev_exception_item ex;
|
2014-05-17 01:22:48 +08:00
|
|
|
struct dev_cgroup *parent = css_to_devcgroup(devcgroup->css.parent);
|
2008-04-29 16:00:10 +08:00
|
|
|
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
|
|
return -EPERM;
|
|
|
|
|
2012-10-05 08:15:20 +08:00
|
|
|
memset(&ex, 0, sizeof(ex));
|
2008-04-29 16:00:10 +08:00
|
|
|
b = buffer;
|
|
|
|
|
|
|
|
switch (*b) {
|
|
|
|
case 'a':
|
2012-10-05 08:15:17 +08:00
|
|
|
switch (filetype) {
|
|
|
|
case DEVCG_ALLOW:
|
2014-05-17 01:22:52 +08:00
|
|
|
if (css_has_online_children(&devcgroup->css))
|
2013-02-16 00:55:47 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2012-10-26 04:37:45 +08:00
|
|
|
if (!may_allow_all(parent))
|
2012-10-05 08:15:17 +08:00
|
|
|
return -EPERM;
|
2012-10-05 08:15:20 +08:00
|
|
|
dev_exception_clean(devcgroup);
|
2012-11-06 23:25:04 +08:00
|
|
|
devcgroup->behavior = DEVCG_DEFAULT_ALLOW;
|
|
|
|
if (!parent)
|
|
|
|
break;
|
|
|
|
|
2012-10-26 04:37:45 +08:00
|
|
|
rc = dev_exceptions_copy(&devcgroup->exceptions,
|
|
|
|
&parent->exceptions);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
2012-10-05 08:15:17 +08:00
|
|
|
break;
|
|
|
|
case DEVCG_DENY:
|
2014-05-17 01:22:52 +08:00
|
|
|
if (css_has_online_children(&devcgroup->css))
|
2013-02-16 00:55:47 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2012-10-05 08:15:20 +08:00
|
|
|
dev_exception_clean(devcgroup);
|
2012-10-26 04:37:38 +08:00
|
|
|
devcgroup->behavior = DEVCG_DEFAULT_DENY;
|
2012-10-05 08:15:17 +08:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
2008-04-29 16:00:10 +08:00
|
|
|
case 'b':
|
2017-11-05 21:15:30 +08:00
|
|
|
ex.type = DEVCG_DEV_BLOCK;
|
2008-04-29 16:00:10 +08:00
|
|
|
break;
|
|
|
|
case 'c':
|
2017-11-05 21:15:30 +08:00
|
|
|
ex.type = DEVCG_DEV_CHAR;
|
2008-04-29 16:00:10 +08:00
|
|
|
break;
|
|
|
|
default:
|
2008-07-25 16:47:03 +08:00
|
|
|
return -EINVAL;
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
|
|
|
b++;
|
2008-07-25 16:47:03 +08:00
|
|
|
if (!isspace(*b))
|
|
|
|
return -EINVAL;
|
2008-04-29 16:00:10 +08:00
|
|
|
b++;
|
|
|
|
if (*b == '*') {
|
2012-10-05 08:15:20 +08:00
|
|
|
ex.major = ~0;
|
2008-04-29 16:00:10 +08:00
|
|
|
b++;
|
|
|
|
} else if (isdigit(*b)) {
|
2012-10-26 04:37:41 +08:00
|
|
|
memset(temp, 0, sizeof(temp));
|
|
|
|
for (count = 0; count < sizeof(temp) - 1; count++) {
|
|
|
|
temp[count] = *b;
|
|
|
|
b++;
|
|
|
|
if (!isdigit(*b))
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
rc = kstrtou32(temp, 10, &ex.major);
|
|
|
|
if (rc)
|
|
|
|
return -EINVAL;
|
2008-04-29 16:00:10 +08:00
|
|
|
} else {
|
2008-07-25 16:47:03 +08:00
|
|
|
return -EINVAL;
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
2008-07-25 16:47:03 +08:00
|
|
|
if (*b != ':')
|
|
|
|
return -EINVAL;
|
2008-04-29 16:00:10 +08:00
|
|
|
b++;
|
|
|
|
|
|
|
|
/* read minor */
|
|
|
|
if (*b == '*') {
|
2012-10-05 08:15:20 +08:00
|
|
|
ex.minor = ~0;
|
2008-04-29 16:00:10 +08:00
|
|
|
b++;
|
|
|
|
} else if (isdigit(*b)) {
|
2012-10-26 04:37:41 +08:00
|
|
|
memset(temp, 0, sizeof(temp));
|
|
|
|
for (count = 0; count < sizeof(temp) - 1; count++) {
|
|
|
|
temp[count] = *b;
|
|
|
|
b++;
|
|
|
|
if (!isdigit(*b))
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
rc = kstrtou32(temp, 10, &ex.minor);
|
|
|
|
if (rc)
|
|
|
|
return -EINVAL;
|
2008-04-29 16:00:10 +08:00
|
|
|
} else {
|
2008-07-25 16:47:03 +08:00
|
|
|
return -EINVAL;
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
2008-07-25 16:47:03 +08:00
|
|
|
if (!isspace(*b))
|
|
|
|
return -EINVAL;
|
2008-04-29 16:00:10 +08:00
|
|
|
for (b++, count = 0; count < 3; count++, b++) {
|
|
|
|
switch (*b) {
|
|
|
|
case 'r':
|
2017-11-05 21:15:30 +08:00
|
|
|
ex.access |= DEVCG_ACC_READ;
|
2008-04-29 16:00:10 +08:00
|
|
|
break;
|
|
|
|
case 'w':
|
2017-11-05 21:15:30 +08:00
|
|
|
ex.access |= DEVCG_ACC_WRITE;
|
2008-04-29 16:00:10 +08:00
|
|
|
break;
|
|
|
|
case 'm':
|
2017-11-05 21:15:30 +08:00
|
|
|
ex.access |= DEVCG_ACC_MKNOD;
|
2008-04-29 16:00:10 +08:00
|
|
|
break;
|
|
|
|
case '\n':
|
|
|
|
case '\0':
|
|
|
|
count = 3;
|
|
|
|
break;
|
|
|
|
default:
|
2008-07-25 16:47:03 +08:00
|
|
|
return -EINVAL;
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (filetype) {
|
|
|
|
case DEVCG_ALLOW:
|
2012-10-05 08:15:17 +08:00
|
|
|
/*
|
|
|
|
* If the default policy is to allow by default, try to remove
|
|
|
|
* an matching exception instead. And be silent about it: we
|
|
|
|
* don't want to break compatibility
|
|
|
|
*/
|
2012-10-26 04:37:38 +08:00
|
|
|
if (devcgroup->behavior == DEVCG_DEFAULT_ALLOW) {
|
2014-05-05 23:18:59 +08:00
|
|
|
/* Check if the parent allows removing it first */
|
|
|
|
if (!parent_allows_removal(devcgroup, &ex))
|
|
|
|
return -EPERM;
|
2012-10-05 08:15:20 +08:00
|
|
|
dev_exception_rm(devcgroup, &ex);
|
2014-05-05 23:18:59 +08:00
|
|
|
break;
|
2012-10-05 08:15:17 +08:00
|
|
|
}
|
2014-05-05 23:18:59 +08:00
|
|
|
|
|
|
|
if (!parent_has_perm(devcgroup, &ex))
|
|
|
|
return -EPERM;
|
2013-02-16 00:55:47 +08:00
|
|
|
rc = dev_exception_add(devcgroup, &ex);
|
|
|
|
break;
|
2008-04-29 16:00:10 +08:00
|
|
|
case DEVCG_DENY:
|
2012-10-05 08:15:17 +08:00
|
|
|
/*
|
|
|
|
* If the default policy is to deny by default, try to remove
|
|
|
|
* an matching exception instead. And be silent about it: we
|
|
|
|
* don't want to break compatibility
|
|
|
|
*/
|
2013-02-16 00:55:47 +08:00
|
|
|
if (devcgroup->behavior == DEVCG_DEFAULT_DENY)
|
2012-10-05 08:15:20 +08:00
|
|
|
dev_exception_rm(devcgroup, &ex);
|
2013-02-16 00:55:47 +08:00
|
|
|
else
|
|
|
|
rc = dev_exception_add(devcgroup, &ex);
|
|
|
|
|
|
|
|
if (rc)
|
|
|
|
break;
|
|
|
|
/* we only propagate new restrictions */
|
|
|
|
rc = propagate_exception(devcgroup, &ex);
|
|
|
|
break;
|
2008-04-29 16:00:10 +08:00
|
|
|
default:
|
2013-02-16 00:55:47 +08:00
|
|
|
rc = -EINVAL;
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
2013-02-16 00:55:47 +08:00
|
|
|
return rc;
|
2008-07-25 16:47:03 +08:00
|
|
|
}
|
2008-04-29 16:00:10 +08:00
|
|
|
|
2014-05-14 00:16:21 +08:00
|
|
|
static ssize_t devcgroup_access_write(struct kernfs_open_file *of,
|
|
|
|
char *buf, size_t nbytes, loff_t off)
|
2008-07-25 16:47:03 +08:00
|
|
|
{
|
|
|
|
int retval;
|
2009-04-03 07:57:32 +08:00
|
|
|
|
|
|
|
mutex_lock(&devcgroup_mutex);
|
2014-05-14 00:16:21 +08:00
|
|
|
retval = devcgroup_update_access(css_to_devcgroup(of_css(of)),
|
|
|
|
of_cft(of)->private, strstrip(buf));
|
2009-04-03 07:57:32 +08:00
|
|
|
mutex_unlock(&devcgroup_mutex);
|
2014-05-14 00:16:21 +08:00
|
|
|
return retval ?: nbytes;
|
2008-04-29 16:00:10 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct cftype dev_cgroup_files[] = {
|
|
|
|
{
|
|
|
|
.name = "allow",
|
2014-05-14 00:16:21 +08:00
|
|
|
.write = devcgroup_access_write,
|
2008-04-29 16:00:10 +08:00
|
|
|
.private = DEVCG_ALLOW,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "deny",
|
2014-05-14 00:16:21 +08:00
|
|
|
.write = devcgroup_access_write,
|
2008-04-29 16:00:10 +08:00
|
|
|
.private = DEVCG_DENY,
|
|
|
|
},
|
2008-04-29 16:00:14 +08:00
|
|
|
{
|
|
|
|
.name = "list",
|
2013-12-06 01:28:04 +08:00
|
|
|
.seq_show = devcgroup_seq_show,
|
2008-04-29 16:00:14 +08:00
|
|
|
.private = DEVCG_LIST,
|
|
|
|
},
|
2012-04-02 03:09:55 +08:00
|
|
|
{ } /* terminate */
|
2008-04-29 16:00:10 +08:00
|
|
|
};
|
|
|
|
|
2014-02-08 23:36:58 +08:00
|
|
|
struct cgroup_subsys devices_cgrp_subsys = {
|
2012-11-20 00:13:38 +08:00
|
|
|
.css_alloc = devcgroup_css_alloc,
|
|
|
|
.css_free = devcgroup_css_free,
|
2013-02-16 00:55:46 +08:00
|
|
|
.css_online = devcgroup_online,
|
|
|
|
.css_offline = devcgroup_offline,
|
2014-07-15 23:05:09 +08:00
|
|
|
.legacy_cftypes = dev_cgroup_files,
|
2008-04-29 16:00:10 +08:00
|
|
|
};
|
|
|
|
|
2012-10-05 08:15:17 +08:00
|
|
|
/**
|
|
|
|
* __devcgroup_check_permission - checks if an inode operation is permitted
|
|
|
|
* @dev_cgroup: the dev cgroup to be tested against
|
|
|
|
* @type: device type
|
|
|
|
* @major: device major number
|
|
|
|
* @minor: device minor number
|
2017-11-05 21:15:30 +08:00
|
|
|
* @access: combination of DEVCG_ACC_WRITE, DEVCG_ACC_READ and DEVCG_ACC_MKNOD
|
2012-10-05 08:15:17 +08:00
|
|
|
*
|
|
|
|
* returns 0 on success, -EPERM case the operation is not permitted
|
|
|
|
*/
|
2019-05-16 23:37:16 +08:00
|
|
|
static int __devcgroup_check_permission(short type, u32 major, u32 minor,
|
|
|
|
short access)
|
2008-04-29 16:00:10 +08:00
|
|
|
{
|
2012-10-26 04:37:34 +08:00
|
|
|
struct dev_cgroup *dev_cgroup;
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
bool rc;
|
2008-09-03 05:35:52 +08:00
|
|
|
|
2012-10-05 08:15:17 +08:00
|
|
|
rcu_read_lock();
|
2012-10-26 04:37:34 +08:00
|
|
|
dev_cgroup = task_devcgroup(current);
|
device_cgroup: rework device access check and exception checking
Whenever a device file is opened and checked against current device
cgroup rules, it uses the same function (may_access()) as when a new
exception rule is added by writing devices.{allow,deny}. And in both
cases, the algorithm is the same, doesn't matter the behavior.
First problem is having device access to be considered the same as rule
checking. Consider the following structure:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: allow, exceptions disallow access)
A new exception is added to B by writing devices.deny:
c 12:34 rw
When checking if that exception is allowed in may_access():
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
/* the exception will deny access to certain devices */
return true;
Which is ok, since B is not getting more privileges than A, it doesn't
matter and the rule is accepted
Now, consider it's a device file open check and the process belongs to
cgroup B. The access will be generated as:
behavior: allow
exception: c 12:34 rw
The very same chunk of code will allow it, even if there's an explicit
exception telling to do otherwise.
A simple test case:
# mkdir new_group
# cd new_group
# echo $$ >tasks
# echo "c 1:3 w" >devices.deny
# echo >/dev/null
# echo $?
0
This is a serious bug and was introduced on
c39a2a3018f8 devcg: prepare may_access() for hierarchy support
To solve this problem, the device file open function was split from the
new exception check.
Second problem is how exceptions are processed by may_access(). The
first part of the said function tries to match fully with an existing
exception:
list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
if (ex->major != ~0 && ex->major != refex->major)
continue;
if (ex->minor != ~0 && ex->minor != refex->minor)
continue;
if (refex->access & (~ex->access))
continue;
match = true;
break;
}
That means the new exception should be contained into an existing one to
be considered a match:
New exception Existing match? notes
b 12:34 rwm b 12:34 rwm yes
b 12:34 r b *:34 rw yes
b 12:34 rw b 12:34 w no extra "r"
b *:34 rw b 12:34 rw no too broad "*"
b *:34 rw b *:34 rwm yes
Which is fine in some cases. Consider:
A (default behavior: deny, exceptions allow access)
\
B (default behavior: deny, exceptions allow access)
In this case the full match makes sense, the new exception cannot add
more access than the parent allows
But this doesn't always work, consider:
A (default behavior: allow, exceptions disallow access)
\
B (default behavior: deny, exceptions allow access)
In this case, a new exception in B shouldn't match any of the exceptions
in A, after all you can't allow something that was forbidden by A. But
consider this scenario:
New exception Existing in A match? outcome
b 12:34 rw b 12:34 r no exception is accepted
Because the new exception has "w" as extra, it doesn't match, so it'll
be added to B's exception list.
The same problem can happen during a file access check. Consider a
cgroup with allow as default behavior:
Access Exception match?
b 12:34 rw b 12:34 r no
In this case, the access didn't match any of the exceptions in the
cgroup, which is required since exceptions will disallow access.
To solve this problem, two new functions were created to match an
exception either fully or partially. In the example above, a partial
check will be performed and it'll produce a match since at least
"b 12:34 r" from "b 12:34 rw" access matches.
Cc: cgroups@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-22 00:13:03 +08:00
|
|
|
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW)
|
|
|
|
/* Can't match any of the exceptions, even partially */
|
|
|
|
rc = !match_exception_partial(&dev_cgroup->exceptions,
|
|
|
|
type, major, minor, access);
|
|
|
|
else
|
|
|
|
/* Need to match completely one exception to be allowed */
|
|
|
|
rc = match_exception(&dev_cgroup->exceptions, type, major,
|
|
|
|
minor, access);
|
2012-10-05 08:15:17 +08:00
|
|
|
rcu_read_unlock();
|
2009-06-18 07:26:33 +08:00
|
|
|
|
2012-10-05 08:15:17 +08:00
|
|
|
if (!rc)
|
|
|
|
return -EPERM;
|
2008-09-03 05:35:52 +08:00
|
|
|
|
2012-10-05 08:15:17 +08:00
|
|
|
return 0;
|
|
|
|
}
|
2019-05-16 23:37:16 +08:00
|
|
|
|
|
|
|
int devcgroup_check_permission(short type, u32 major, u32 minor, short access)
|
|
|
|
{
|
|
|
|
int rc = BPF_CGROUP_RUN_PROG_DEVICE_CGROUP(type, major, minor, access);
|
|
|
|
|
|
|
|
if (rc)
|
|
|
|
return -EPERM;
|
|
|
|
|
|
|
|
return __devcgroup_check_permission(type, major, minor, access);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(devcgroup_check_permission);
|