2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
VES1820 - Single Chip Cable Channel Receiver driver module
|
|
|
|
|
|
|
|
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program; if not, write to the Free Software
|
|
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
|
|
|
|
#include "dvb_frontend.h"
|
|
|
|
#include "ves1820.h"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
struct ves1820_state {
|
|
|
|
struct i2c_adapter* i2c;
|
|
|
|
/* configuration settings */
|
|
|
|
const struct ves1820_config* config;
|
|
|
|
struct dvb_frontend frontend;
|
|
|
|
|
|
|
|
/* private demodulator data */
|
|
|
|
u8 reg0;
|
|
|
|
u8 pwm;
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static int verbose;
|
|
|
|
|
|
|
|
static u8 ves1820_inittab[] = {
|
2007-10-31 12:34:25 +08:00
|
|
|
0x69, 0x6A, 0x93, 0x1A, 0x12, 0x46, 0x26, 0x1A,
|
2005-04-17 06:20:36 +08:00
|
|
|
0x43, 0x6A, 0xAA, 0xAA, 0x1E, 0x85, 0x43, 0x20,
|
|
|
|
0xE0, 0x00, 0xA1, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
|
|
0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
|
|
|
|
0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
|
|
0x00, 0x00, 0x00, 0x00, 0x40
|
|
|
|
};
|
|
|
|
|
|
|
|
static int ves1820_writereg(struct ves1820_state *state, u8 reg, u8 data)
|
|
|
|
{
|
|
|
|
u8 buf[] = { 0x00, reg, data };
|
|
|
|
struct i2c_msg msg = {.addr = state->config->demod_address,.flags = 0,.buf = buf,.len = 3 };
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = i2c_transfer(state->i2c, &msg, 1);
|
|
|
|
|
|
|
|
if (ret != 1)
|
2007-11-20 09:48:15 +08:00
|
|
|
printk("ves1820: %s(): writereg error (reg == 0x%02x, "
|
2008-04-09 10:20:00 +08:00
|
|
|
"val == 0x%02x, ret == %i)\n", __func__, reg, data, ret);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
return (ret != 1) ? -EREMOTEIO : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static u8 ves1820_readreg(struct ves1820_state *state, u8 reg)
|
|
|
|
{
|
|
|
|
u8 b0[] = { 0x00, reg };
|
|
|
|
u8 b1[] = { 0 };
|
|
|
|
struct i2c_msg msg[] = {
|
|
|
|
{.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 2},
|
|
|
|
{.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1}
|
|
|
|
};
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
|
|
|
|
|
|
if (ret != 2)
|
2007-11-20 09:48:15 +08:00
|
|
|
printk("ves1820: %s(): readreg error (reg == 0x%02x, "
|
2008-04-09 10:20:00 +08:00
|
|
|
"ret == %i)\n", __func__, reg, ret);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
return b1[0];
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ves1820_setup_reg0(struct ves1820_state *state, u8 reg0, fe_spectral_inversion_t inversion)
|
|
|
|
{
|
|
|
|
reg0 |= state->reg0 & 0x62;
|
|
|
|
|
|
|
|
if (INVERSION_ON == inversion) {
|
|
|
|
if (!state->config->invert) reg0 |= 0x20;
|
|
|
|
else reg0 &= ~0x20;
|
|
|
|
} else if (INVERSION_OFF == inversion) {
|
|
|
|
if (!state->config->invert) reg0 &= ~0x20;
|
|
|
|
else reg0 |= 0x20;
|
|
|
|
}
|
|
|
|
|
|
|
|
ves1820_writereg(state, 0x00, reg0 & 0xfe);
|
|
|
|
ves1820_writereg(state, 0x00, reg0 | 0x01);
|
|
|
|
|
|
|
|
state->reg0 = reg0;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ves1820_set_symbolrate(struct ves1820_state *state, u32 symbolrate)
|
|
|
|
{
|
|
|
|
s32 BDR;
|
|
|
|
s32 BDRI;
|
|
|
|
s16 SFIL = 0;
|
|
|
|
u16 NDEC = 0;
|
|
|
|
u32 ratio;
|
|
|
|
u32 fin;
|
|
|
|
u32 tmp;
|
|
|
|
u64 fptmp;
|
|
|
|
u64 fpxin;
|
|
|
|
|
|
|
|
if (symbolrate > state->config->xin / 2)
|
|
|
|
symbolrate = state->config->xin / 2;
|
|
|
|
|
|
|
|
if (symbolrate < 500000)
|
|
|
|
symbolrate = 500000;
|
|
|
|
|
|
|
|
if (symbolrate < state->config->xin / 16)
|
|
|
|
NDEC = 1;
|
|
|
|
if (symbolrate < state->config->xin / 32)
|
|
|
|
NDEC = 2;
|
|
|
|
if (symbolrate < state->config->xin / 64)
|
|
|
|
NDEC = 3;
|
|
|
|
|
|
|
|
/* yeuch! */
|
|
|
|
fpxin = state->config->xin * 10;
|
|
|
|
fptmp = fpxin; do_div(fptmp, 123);
|
2005-12-01 16:51:55 +08:00
|
|
|
if (symbolrate < fptmp)
|
2005-04-17 06:20:36 +08:00
|
|
|
SFIL = 1;
|
|
|
|
fptmp = fpxin; do_div(fptmp, 160);
|
2005-12-01 16:51:55 +08:00
|
|
|
if (symbolrate < fptmp)
|
2005-04-17 06:20:36 +08:00
|
|
|
SFIL = 0;
|
|
|
|
fptmp = fpxin; do_div(fptmp, 246);
|
2005-12-01 16:51:55 +08:00
|
|
|
if (symbolrate < fptmp)
|
2005-04-17 06:20:36 +08:00
|
|
|
SFIL = 1;
|
|
|
|
fptmp = fpxin; do_div(fptmp, 320);
|
2005-12-01 16:51:55 +08:00
|
|
|
if (symbolrate < fptmp)
|
2005-04-17 06:20:36 +08:00
|
|
|
SFIL = 0;
|
|
|
|
fptmp = fpxin; do_div(fptmp, 492);
|
2005-12-01 16:51:55 +08:00
|
|
|
if (symbolrate < fptmp)
|
2005-04-17 06:20:36 +08:00
|
|
|
SFIL = 1;
|
|
|
|
fptmp = fpxin; do_div(fptmp, 640);
|
2005-12-01 16:51:55 +08:00
|
|
|
if (symbolrate < fptmp)
|
2005-04-17 06:20:36 +08:00
|
|
|
SFIL = 0;
|
|
|
|
fptmp = fpxin; do_div(fptmp, 984);
|
2005-12-01 16:51:55 +08:00
|
|
|
if (symbolrate < fptmp)
|
2005-04-17 06:20:36 +08:00
|
|
|
SFIL = 1;
|
|
|
|
|
|
|
|
fin = state->config->xin >> 4;
|
|
|
|
symbolrate <<= NDEC;
|
|
|
|
ratio = (symbolrate << 4) / fin;
|
|
|
|
tmp = ((symbolrate << 4) % fin) << 8;
|
|
|
|
ratio = (ratio << 8) + tmp / fin;
|
|
|
|
tmp = (tmp % fin) << 8;
|
2009-08-02 03:48:41 +08:00
|
|
|
ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, fin);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
BDR = ratio;
|
|
|
|
BDRI = (((state->config->xin << 5) / symbolrate) + 1) / 2;
|
|
|
|
|
|
|
|
if (BDRI > 0xFF)
|
|
|
|
BDRI = 0xFF;
|
|
|
|
|
|
|
|
SFIL = (SFIL << 4) | ves1820_inittab[0x0E];
|
|
|
|
|
|
|
|
NDEC = (NDEC << 6) | ves1820_inittab[0x03];
|
|
|
|
|
|
|
|
ves1820_writereg(state, 0x03, NDEC);
|
|
|
|
ves1820_writereg(state, 0x0a, BDR & 0xff);
|
|
|
|
ves1820_writereg(state, 0x0b, (BDR >> 8) & 0xff);
|
|
|
|
ves1820_writereg(state, 0x0c, (BDR >> 16) & 0x3f);
|
|
|
|
|
|
|
|
ves1820_writereg(state, 0x0d, BDRI);
|
|
|
|
ves1820_writereg(state, 0x0e, SFIL);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ves1820_init(struct dvb_frontend* fe)
|
|
|
|
{
|
2005-05-17 12:54:31 +08:00
|
|
|
struct ves1820_state* state = fe->demodulator_priv;
|
2005-04-17 06:20:36 +08:00
|
|
|
int i;
|
|
|
|
|
|
|
|
ves1820_writereg(state, 0, 0);
|
|
|
|
|
2005-09-10 04:02:34 +08:00
|
|
|
for (i = 0; i < sizeof(ves1820_inittab); i++)
|
|
|
|
ves1820_writereg(state, i, ves1820_inittab[i]);
|
|
|
|
if (state->config->selagc)
|
|
|
|
ves1820_writereg(state, 2, ves1820_inittab[2] | 0x08);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
ves1820_writereg(state, 0x34, state->pwm);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-12-27 02:09:31 +08:00
|
|
|
static int ves1820_set_parameters(struct dvb_frontend *fe)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2011-12-27 02:09:31 +08:00
|
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
2005-05-17 12:54:31 +08:00
|
|
|
struct ves1820_state* state = fe->demodulator_priv;
|
2005-04-17 06:20:36 +08:00
|
|
|
static const u8 reg0x00[] = { 0x00, 0x04, 0x08, 0x0c, 0x10 };
|
|
|
|
static const u8 reg0x01[] = { 140, 140, 106, 100, 92 };
|
|
|
|
static const u8 reg0x05[] = { 135, 100, 70, 54, 38 };
|
|
|
|
static const u8 reg0x08[] = { 162, 116, 67, 52, 35 };
|
|
|
|
static const u8 reg0x09[] = { 145, 150, 106, 126, 107 };
|
2011-12-27 02:09:31 +08:00
|
|
|
int real_qam = p->modulation - QAM_16;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
if (real_qam < 0 || real_qam > 4)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2006-05-14 16:01:31 +08:00
|
|
|
if (fe->ops.tuner_ops.set_params) {
|
2011-12-24 23:24:33 +08:00
|
|
|
fe->ops.tuner_ops.set_params(fe);
|
2006-05-14 16:01:31 +08:00
|
|
|
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
|
2006-04-19 04:47:10 +08:00
|
|
|
}
|
|
|
|
|
2011-12-27 02:09:31 +08:00
|
|
|
ves1820_set_symbolrate(state, p->symbol_rate);
|
2005-04-17 06:20:36 +08:00
|
|
|
ves1820_writereg(state, 0x34, state->pwm);
|
|
|
|
|
|
|
|
ves1820_writereg(state, 0x01, reg0x01[real_qam]);
|
|
|
|
ves1820_writereg(state, 0x05, reg0x05[real_qam]);
|
|
|
|
ves1820_writereg(state, 0x08, reg0x08[real_qam]);
|
|
|
|
ves1820_writereg(state, 0x09, reg0x09[real_qam]);
|
|
|
|
|
|
|
|
ves1820_setup_reg0(state, reg0x00[real_qam], p->inversion);
|
2005-09-10 04:02:34 +08:00
|
|
|
ves1820_writereg(state, 2, ves1820_inittab[2] | (state->config->selagc ? 0x08 : 0));
|
2005-04-17 06:20:36 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ves1820_read_status(struct dvb_frontend* fe, fe_status_t* status)
|
|
|
|
{
|
2005-05-17 12:54:31 +08:00
|
|
|
struct ves1820_state* state = fe->demodulator_priv;
|
2005-04-17 06:20:36 +08:00
|
|
|
int sync;
|
|
|
|
|
|
|
|
*status = 0;
|
|
|
|
sync = ves1820_readreg(state, 0x11);
|
|
|
|
|
|
|
|
if (sync & 1)
|
|
|
|
*status |= FE_HAS_SIGNAL;
|
|
|
|
|
|
|
|
if (sync & 2)
|
|
|
|
*status |= FE_HAS_CARRIER;
|
|
|
|
|
|
|
|
if (sync & 2) /* XXX FIXME! */
|
|
|
|
*status |= FE_HAS_VITERBI;
|
|
|
|
|
|
|
|
if (sync & 4)
|
|
|
|
*status |= FE_HAS_SYNC;
|
|
|
|
|
|
|
|
if (sync & 8)
|
|
|
|
*status |= FE_HAS_LOCK;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ves1820_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
|
|
{
|
2005-05-17 12:54:31 +08:00
|
|
|
struct ves1820_state* state = fe->demodulator_priv;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
u32 _ber = ves1820_readreg(state, 0x14) |
|
|
|
|
(ves1820_readreg(state, 0x15) << 8) |
|
|
|
|
((ves1820_readreg(state, 0x16) & 0x0f) << 16);
|
|
|
|
*ber = 10 * _ber;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ves1820_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
|
|
{
|
2005-05-17 12:54:31 +08:00
|
|
|
struct ves1820_state* state = fe->demodulator_priv;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
u8 gain = ves1820_readreg(state, 0x17);
|
|
|
|
*strength = (gain << 8) | gain;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ves1820_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
|
|
{
|
2005-05-17 12:54:31 +08:00
|
|
|
struct ves1820_state* state = fe->demodulator_priv;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
u8 quality = ~ves1820_readreg(state, 0x18);
|
|
|
|
*snr = (quality << 8) | quality;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ves1820_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
|
|
{
|
2005-05-17 12:54:31 +08:00
|
|
|
struct ves1820_state* state = fe->demodulator_priv;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
*ucblocks = ves1820_readreg(state, 0x13) & 0x7f;
|
|
|
|
if (*ucblocks == 0x7f)
|
|
|
|
*ucblocks = 0xffffffff;
|
|
|
|
|
|
|
|
/* reset uncorrected block counter */
|
|
|
|
ves1820_writereg(state, 0x10, ves1820_inittab[0x10] & 0xdf);
|
|
|
|
ves1820_writereg(state, 0x10, ves1820_inittab[0x10]);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
[media] dvb: don't require a parameter for get_frontend
Just like set_frontend, use the dvb cache properties for get_frontend.
This is more consistent, as both functions are now symetric. Also,
at the places get_frontend is called, it makes sense to update the
cache.
Most of this patch were generated by this small perl script:
while (<>) { $file .= $_; }
if ($file =~ m/\.get_frontend\s*=\s*([\d\w_]+)/) {
my $get = $1;
$file =~ s/($get)(\s*\([^\,\)]+)\,\s*struct\s+dtv_frontend_properties\s*\*\s*([_\d\w]+)\)\s*\{/\1\2)\n{\n\tstruct dtv_frontend_properties *\3 = &fe->dtv_property_cache;/g;
}
print $file;
Of course, the changes at dvb_frontend.[ch] were made by hand,
as well as the changes on a few other places, where get_frontend()
is called internally inside the driver.
On some places, get_frontend() were just a void function. Those
occurrences were removed, as the DVB core handles such cases.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 22:30:21 +08:00
|
|
|
static int ves1820_get_frontend(struct dvb_frontend *fe)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
[media] dvb: don't require a parameter for get_frontend
Just like set_frontend, use the dvb cache properties for get_frontend.
This is more consistent, as both functions are now symetric. Also,
at the places get_frontend is called, it makes sense to update the
cache.
Most of this patch were generated by this small perl script:
while (<>) { $file .= $_; }
if ($file =~ m/\.get_frontend\s*=\s*([\d\w_]+)/) {
my $get = $1;
$file =~ s/($get)(\s*\([^\,\)]+)\,\s*struct\s+dtv_frontend_properties\s*\*\s*([_\d\w]+)\)\s*\{/\1\2)\n{\n\tstruct dtv_frontend_properties *\3 = &fe->dtv_property_cache;/g;
}
print $file;
Of course, the changes at dvb_frontend.[ch] were made by hand,
as well as the changes on a few other places, where get_frontend()
is called internally inside the driver.
On some places, get_frontend() were just a void function. Those
occurrences were removed, as the DVB core handles such cases.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 22:30:21 +08:00
|
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
2005-05-17 12:54:31 +08:00
|
|
|
struct ves1820_state* state = fe->demodulator_priv;
|
2005-04-17 06:20:36 +08:00
|
|
|
int sync;
|
|
|
|
s8 afc = 0;
|
|
|
|
|
|
|
|
sync = ves1820_readreg(state, 0x11);
|
|
|
|
afc = ves1820_readreg(state, 0x19);
|
|
|
|
if (verbose) {
|
|
|
|
/* AFC only valid when carrier has been recovered */
|
|
|
|
printk(sync & 2 ? "ves1820: AFC (%d) %dHz\n" :
|
2011-12-27 02:09:31 +08:00
|
|
|
"ves1820: [AFC (%d) %dHz]\n", afc, -((s32) p->symbol_rate * afc) >> 10);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
if (!state->config->invert) {
|
|
|
|
p->inversion = (state->reg0 & 0x20) ? INVERSION_ON : INVERSION_OFF;
|
|
|
|
} else {
|
|
|
|
p->inversion = (!(state->reg0 & 0x20)) ? INVERSION_ON : INVERSION_OFF;
|
|
|
|
}
|
|
|
|
|
2011-12-27 02:09:31 +08:00
|
|
|
p->modulation = ((state->reg0 >> 2) & 7) + QAM_16;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2011-12-27 02:09:31 +08:00
|
|
|
p->fec_inner = FEC_NONE;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
p->frequency = ((p->frequency + 31250) / 62500) * 62500;
|
|
|
|
if (sync & 2)
|
2011-12-27 02:09:31 +08:00
|
|
|
p->frequency -= ((s32) p->symbol_rate * afc) >> 10;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ves1820_sleep(struct dvb_frontend* fe)
|
|
|
|
{
|
2005-05-17 12:54:31 +08:00
|
|
|
struct ves1820_state* state = fe->demodulator_priv;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
ves1820_writereg(state, 0x1b, 0x02); /* pdown ADC */
|
|
|
|
ves1820_writereg(state, 0x00, 0x80); /* standby */
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ves1820_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
|
|
|
|
{
|
|
|
|
|
|
|
|
fesettings->min_delay_ms = 200;
|
|
|
|
fesettings->step_size = 0;
|
|
|
|
fesettings->max_drift = 0;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ves1820_release(struct dvb_frontend* fe)
|
|
|
|
{
|
2005-05-17 12:54:31 +08:00
|
|
|
struct ves1820_state* state = fe->demodulator_priv;
|
2005-04-17 06:20:36 +08:00
|
|
|
kfree(state);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct dvb_frontend_ops ves1820_ops;
|
|
|
|
|
|
|
|
struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
|
|
|
|
struct i2c_adapter* i2c,
|
|
|
|
u8 pwm)
|
|
|
|
{
|
|
|
|
struct ves1820_state* state = NULL;
|
|
|
|
|
|
|
|
/* allocate memory for the internal state */
|
2009-08-11 09:51:01 +08:00
|
|
|
state = kzalloc(sizeof(struct ves1820_state), GFP_KERNEL);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (state == NULL)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
/* setup the state */
|
|
|
|
state->reg0 = ves1820_inittab[0];
|
|
|
|
state->config = config;
|
|
|
|
state->i2c = i2c;
|
|
|
|
state->pwm = pwm;
|
|
|
|
|
|
|
|
/* check if the demod is there */
|
|
|
|
if ((ves1820_readreg(state, 0x1a) & 0xf0) != 0x70)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
if (verbose)
|
|
|
|
printk("ves1820: pwm=0x%02x\n", state->pwm);
|
|
|
|
|
|
|
|
/* create dvb_frontend */
|
2006-05-14 16:01:31 +08:00
|
|
|
memcpy(&state->frontend.ops, &ves1820_ops, sizeof(struct dvb_frontend_ops));
|
|
|
|
state->frontend.ops.info.symbol_rate_min = (state->config->xin / 2) / 64; /* SACLK/64 == (XIN/2)/64 */
|
|
|
|
state->frontend.ops.info.symbol_rate_max = (state->config->xin / 2) / 4; /* SACLK/4 */
|
2005-04-17 06:20:36 +08:00
|
|
|
state->frontend.demodulator_priv = state;
|
2006-05-14 16:01:31 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
return &state->frontend;
|
|
|
|
|
|
|
|
error:
|
|
|
|
kfree(state);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct dvb_frontend_ops ves1820_ops = {
|
2011-12-27 02:09:31 +08:00
|
|
|
.delsys = { SYS_DVBC_ANNEX_A },
|
2005-04-17 06:20:36 +08:00
|
|
|
.info = {
|
|
|
|
.name = "VLSI VES1820 DVB-C",
|
|
|
|
.frequency_stepsize = 62500,
|
2007-08-09 11:01:51 +08:00
|
|
|
.frequency_min = 47000000,
|
|
|
|
.frequency_max = 862000000,
|
2005-04-17 06:20:36 +08:00
|
|
|
.caps = FE_CAN_QAM_16 |
|
|
|
|
FE_CAN_QAM_32 |
|
|
|
|
FE_CAN_QAM_64 |
|
|
|
|
FE_CAN_QAM_128 |
|
|
|
|
FE_CAN_QAM_256 |
|
|
|
|
FE_CAN_FEC_AUTO
|
|
|
|
},
|
|
|
|
|
|
|
|
.release = ves1820_release,
|
|
|
|
|
|
|
|
.init = ves1820_init,
|
|
|
|
.sleep = ves1820_sleep,
|
|
|
|
|
2011-12-27 02:09:31 +08:00
|
|
|
.set_frontend = ves1820_set_parameters,
|
|
|
|
.get_frontend = ves1820_get_frontend,
|
2005-04-17 06:20:36 +08:00
|
|
|
.get_tune_settings = ves1820_get_tune_settings,
|
|
|
|
|
|
|
|
.read_status = ves1820_read_status,
|
|
|
|
.read_ber = ves1820_read_ber,
|
|
|
|
.read_signal_strength = ves1820_read_signal_strength,
|
|
|
|
.read_snr = ves1820_read_snr,
|
|
|
|
.read_ucblocks = ves1820_read_ucblocks,
|
|
|
|
};
|
|
|
|
|
|
|
|
module_param(verbose, int, 0644);
|
|
|
|
MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting");
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("VLSI VES1820 DVB-C Demodulator driver");
|
|
|
|
MODULE_AUTHOR("Ralph Metzler, Holger Waechtler");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
EXPORT_SYMBOL(ves1820_attach);
|