linux/drivers/clocksource/exynos_mct.c

618 lines
16 KiB
C
Raw Normal View History

/* linux/arch/arm/mach-exynos4/mct.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 MCT(Multi-Core Timer) support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/cpu.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/percpu.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/clocksource.h>
#include <linux/sched_clock.h>
#define EXYNOS4_MCTREG(x) (x)
#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
#define EXYNOS4_MCT_L_MASK (0xffffff00)
#define MCT_L_TCNTB_OFFSET (0x00)
#define MCT_L_ICNTB_OFFSET (0x08)
#define MCT_L_TCON_OFFSET (0x20)
#define MCT_L_INT_CSTAT_OFFSET (0x30)
#define MCT_L_INT_ENB_OFFSET (0x34)
#define MCT_L_WSTAT_OFFSET (0x40)
#define MCT_G_TCON_START (1 << 8)
#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
#define MCT_L_TCON_INT_START (1 << 1)
#define MCT_L_TCON_TIMER_START (1 << 0)
#define TICK_BASE_CNT 1
enum {
MCT_INT_SPI,
MCT_INT_PPI
};
enum {
MCT_G0_IRQ,
MCT_G1_IRQ,
MCT_G2_IRQ,
MCT_G3_IRQ,
MCT_L0_IRQ,
MCT_L1_IRQ,
MCT_L2_IRQ,
MCT_L3_IRQ,
MCT_L4_IRQ,
MCT_L5_IRQ,
MCT_L6_IRQ,
MCT_L7_IRQ,
MCT_NR_IRQS,
};
static void __iomem *reg_base;
static unsigned long clk_rate;
static unsigned int mct_int_type;
static int mct_irqs[MCT_NR_IRQS];
struct mct_clock_event_device {
struct clock_event_device evt;
unsigned long base;
char name[10];
};
static void exynos4_mct_write(unsigned int value, unsigned long offset)
{
unsigned long stat_addr;
u32 mask;
u32 i;
writel_relaxed(value, reg_base + offset);
if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
stat_addr = (offset & EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
switch (offset & ~EXYNOS4_MCT_L_MASK) {
case MCT_L_TCON_OFFSET:
mask = 1 << 3; /* L_TCON write status */
break;
case MCT_L_ICNTB_OFFSET:
mask = 1 << 1; /* L_ICNTB write status */
break;
case MCT_L_TCNTB_OFFSET:
mask = 1 << 0; /* L_TCNTB write status */
break;
default:
return;
}
} else {
switch (offset) {
case EXYNOS4_MCT_G_TCON:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 16; /* G_TCON write status */
break;
case EXYNOS4_MCT_G_COMP0_L:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 0; /* G_COMP0_L write status */
break;
case EXYNOS4_MCT_G_COMP0_U:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 1; /* G_COMP0_U write status */
break;
case EXYNOS4_MCT_G_COMP0_ADD_INCR:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
break;
case EXYNOS4_MCT_G_CNT_L:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 0; /* G_CNT_L write status */
break;
case EXYNOS4_MCT_G_CNT_U:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 1; /* G_CNT_U write status */
break;
default:
return;
}
}
/* Wait maximum 1 ms until written values are applied */
for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
if (readl_relaxed(reg_base + stat_addr) & mask) {
writel_relaxed(mask, reg_base + stat_addr);
return;
}
panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset);
}
/* Clocksource handling */
static void exynos4_mct_frc_start(void)
{
u32 reg;
reg = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
reg |= MCT_G_TCON_START;
exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
}
clocksource: exynos_mct: Only use 32-bits where possible The MCT has a nice 64-bit counter. That means that we _can_ register as a 64-bit clocksource and sched_clock. ...but that doesn't mean we should. The 64-bit counter is read by reading two 32-bit registers. That means reading needs to be something like: - Read upper half - Read lower half - Read upper half and confirm that it hasn't changed. That wouldn't be terrible, but: - THe MCT isn't very fast to access (hundreds of nanoseconds). - The clocksource is queried _all the time_. In total system profiles of real workloads on ChromeOS, we've seen exynos_frc_read() taking 2% or more of CPU time even after optimizing the 3 reads above to 2 (see below). The MCT is clocked at ~24MHz on all known systems. That means that the 32-bit half of the counter rolls over every ~178 seconds. This inspired an optimization in ChromeOS to cache the upper half between calls, moving 3 reads to 2. ...but we can do better! Having a 32-bit timer that flips every 178 seconds is more than sufficient for Linux. Let's just use the lower half of the MCT. Times on 5420 to do 1000000 gettimeofday() calls from userspace: * Original code: 1323852 us * ChromeOS cache upper half: 1173084 us * ChromeOS + ldmia to optimize: 1045674 us * Use lower 32-bit only (this code): 1014429 us As you can see, the time used doesn't increase linearly with the number of reads and we can make 64-bit work almost as fast as 32-bit with a bit of assembly code. But since there's no real gain for 64-bit, let's go with the simplest and fastest implementation. Note: with this change roughly half the time for gettimeofday() is spent in exynos_frc_read(). The rest is timer / system call overhead. Also note: this patch disables the use of the MCT on ARM64 systems until we've sorted out how to make "cycles_t" always 32-bit. Really ARM64 systems should be using arch timers anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-05 05:43:26 +08:00
/**
* exynos4_read_count_64 - Read all 64-bits of the global counter
*
* This will read all 64-bits of the global counter taking care to make sure
* that the upper and lower half match. Note that reading the MCT can be quite
* slow (hundreds of nanoseconds) so you should use the 32-bit (lower half
* only) version when possible.
*
* Returns the number of cycles in the global counter.
*/
static u64 exynos4_read_count_64(void)
{
unsigned int lo, hi;
u32 hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U);
do {
hi = hi2;
lo = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L);
hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U);
} while (hi != hi2);
return ((cycle_t)hi << 32) | lo;
}
clocksource: exynos_mct: Only use 32-bits where possible The MCT has a nice 64-bit counter. That means that we _can_ register as a 64-bit clocksource and sched_clock. ...but that doesn't mean we should. The 64-bit counter is read by reading two 32-bit registers. That means reading needs to be something like: - Read upper half - Read lower half - Read upper half and confirm that it hasn't changed. That wouldn't be terrible, but: - THe MCT isn't very fast to access (hundreds of nanoseconds). - The clocksource is queried _all the time_. In total system profiles of real workloads on ChromeOS, we've seen exynos_frc_read() taking 2% or more of CPU time even after optimizing the 3 reads above to 2 (see below). The MCT is clocked at ~24MHz on all known systems. That means that the 32-bit half of the counter rolls over every ~178 seconds. This inspired an optimization in ChromeOS to cache the upper half between calls, moving 3 reads to 2. ...but we can do better! Having a 32-bit timer that flips every 178 seconds is more than sufficient for Linux. Let's just use the lower half of the MCT. Times on 5420 to do 1000000 gettimeofday() calls from userspace: * Original code: 1323852 us * ChromeOS cache upper half: 1173084 us * ChromeOS + ldmia to optimize: 1045674 us * Use lower 32-bit only (this code): 1014429 us As you can see, the time used doesn't increase linearly with the number of reads and we can make 64-bit work almost as fast as 32-bit with a bit of assembly code. But since there's no real gain for 64-bit, let's go with the simplest and fastest implementation. Note: with this change roughly half the time for gettimeofday() is spent in exynos_frc_read(). The rest is timer / system call overhead. Also note: this patch disables the use of the MCT on ARM64 systems until we've sorted out how to make "cycles_t" always 32-bit. Really ARM64 systems should be using arch timers anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-05 05:43:26 +08:00
/**
* exynos4_read_count_32 - Read the lower 32-bits of the global counter
*
* This will read just the lower 32-bits of the global counter. This is marked
* as notrace so it can be used by the scheduler clock.
*
* Returns the number of cycles in the global counter (lower 32 bits).
*/
static u32 notrace exynos4_read_count_32(void)
{
return readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L);
}
static cycle_t exynos4_frc_read(struct clocksource *cs)
{
clocksource: exynos_mct: Only use 32-bits where possible The MCT has a nice 64-bit counter. That means that we _can_ register as a 64-bit clocksource and sched_clock. ...but that doesn't mean we should. The 64-bit counter is read by reading two 32-bit registers. That means reading needs to be something like: - Read upper half - Read lower half - Read upper half and confirm that it hasn't changed. That wouldn't be terrible, but: - THe MCT isn't very fast to access (hundreds of nanoseconds). - The clocksource is queried _all the time_. In total system profiles of real workloads on ChromeOS, we've seen exynos_frc_read() taking 2% or more of CPU time even after optimizing the 3 reads above to 2 (see below). The MCT is clocked at ~24MHz on all known systems. That means that the 32-bit half of the counter rolls over every ~178 seconds. This inspired an optimization in ChromeOS to cache the upper half between calls, moving 3 reads to 2. ...but we can do better! Having a 32-bit timer that flips every 178 seconds is more than sufficient for Linux. Let's just use the lower half of the MCT. Times on 5420 to do 1000000 gettimeofday() calls from userspace: * Original code: 1323852 us * ChromeOS cache upper half: 1173084 us * ChromeOS + ldmia to optimize: 1045674 us * Use lower 32-bit only (this code): 1014429 us As you can see, the time used doesn't increase linearly with the number of reads and we can make 64-bit work almost as fast as 32-bit with a bit of assembly code. But since there's no real gain for 64-bit, let's go with the simplest and fastest implementation. Note: with this change roughly half the time for gettimeofday() is spent in exynos_frc_read(). The rest is timer / system call overhead. Also note: this patch disables the use of the MCT on ARM64 systems until we've sorted out how to make "cycles_t" always 32-bit. Really ARM64 systems should be using arch timers anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-05 05:43:26 +08:00
return exynos4_read_count_32();
}
static void exynos4_frc_resume(struct clocksource *cs)
{
exynos4_mct_frc_start();
}
static struct clocksource mct_frc = {
.name = "mct-frc",
.rating = 400,
.read = exynos4_frc_read,
clocksource: exynos_mct: Only use 32-bits where possible The MCT has a nice 64-bit counter. That means that we _can_ register as a 64-bit clocksource and sched_clock. ...but that doesn't mean we should. The 64-bit counter is read by reading two 32-bit registers. That means reading needs to be something like: - Read upper half - Read lower half - Read upper half and confirm that it hasn't changed. That wouldn't be terrible, but: - THe MCT isn't very fast to access (hundreds of nanoseconds). - The clocksource is queried _all the time_. In total system profiles of real workloads on ChromeOS, we've seen exynos_frc_read() taking 2% or more of CPU time even after optimizing the 3 reads above to 2 (see below). The MCT is clocked at ~24MHz on all known systems. That means that the 32-bit half of the counter rolls over every ~178 seconds. This inspired an optimization in ChromeOS to cache the upper half between calls, moving 3 reads to 2. ...but we can do better! Having a 32-bit timer that flips every 178 seconds is more than sufficient for Linux. Let's just use the lower half of the MCT. Times on 5420 to do 1000000 gettimeofday() calls from userspace: * Original code: 1323852 us * ChromeOS cache upper half: 1173084 us * ChromeOS + ldmia to optimize: 1045674 us * Use lower 32-bit only (this code): 1014429 us As you can see, the time used doesn't increase linearly with the number of reads and we can make 64-bit work almost as fast as 32-bit with a bit of assembly code. But since there's no real gain for 64-bit, let's go with the simplest and fastest implementation. Note: with this change roughly half the time for gettimeofday() is spent in exynos_frc_read(). The rest is timer / system call overhead. Also note: this patch disables the use of the MCT on ARM64 systems until we've sorted out how to make "cycles_t" always 32-bit. Really ARM64 systems should be using arch timers anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-05 05:43:26 +08:00
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.resume = exynos4_frc_resume,
};
static u64 notrace exynos4_read_sched_clock(void)
{
clocksource: exynos_mct: Only use 32-bits where possible The MCT has a nice 64-bit counter. That means that we _can_ register as a 64-bit clocksource and sched_clock. ...but that doesn't mean we should. The 64-bit counter is read by reading two 32-bit registers. That means reading needs to be something like: - Read upper half - Read lower half - Read upper half and confirm that it hasn't changed. That wouldn't be terrible, but: - THe MCT isn't very fast to access (hundreds of nanoseconds). - The clocksource is queried _all the time_. In total system profiles of real workloads on ChromeOS, we've seen exynos_frc_read() taking 2% or more of CPU time even after optimizing the 3 reads above to 2 (see below). The MCT is clocked at ~24MHz on all known systems. That means that the 32-bit half of the counter rolls over every ~178 seconds. This inspired an optimization in ChromeOS to cache the upper half between calls, moving 3 reads to 2. ...but we can do better! Having a 32-bit timer that flips every 178 seconds is more than sufficient for Linux. Let's just use the lower half of the MCT. Times on 5420 to do 1000000 gettimeofday() calls from userspace: * Original code: 1323852 us * ChromeOS cache upper half: 1173084 us * ChromeOS + ldmia to optimize: 1045674 us * Use lower 32-bit only (this code): 1014429 us As you can see, the time used doesn't increase linearly with the number of reads and we can make 64-bit work almost as fast as 32-bit with a bit of assembly code. But since there's no real gain for 64-bit, let's go with the simplest and fastest implementation. Note: with this change roughly half the time for gettimeofday() is spent in exynos_frc_read(). The rest is timer / system call overhead. Also note: this patch disables the use of the MCT on ARM64 systems until we've sorted out how to make "cycles_t" always 32-bit. Really ARM64 systems should be using arch timers anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-05 05:43:26 +08:00
return exynos4_read_count_32();
}
static struct delay_timer exynos4_delay_timer;
static cycles_t exynos4_read_current_timer(void)
{
clocksource: exynos_mct: Only use 32-bits where possible The MCT has a nice 64-bit counter. That means that we _can_ register as a 64-bit clocksource and sched_clock. ...but that doesn't mean we should. The 64-bit counter is read by reading two 32-bit registers. That means reading needs to be something like: - Read upper half - Read lower half - Read upper half and confirm that it hasn't changed. That wouldn't be terrible, but: - THe MCT isn't very fast to access (hundreds of nanoseconds). - The clocksource is queried _all the time_. In total system profiles of real workloads on ChromeOS, we've seen exynos_frc_read() taking 2% or more of CPU time even after optimizing the 3 reads above to 2 (see below). The MCT is clocked at ~24MHz on all known systems. That means that the 32-bit half of the counter rolls over every ~178 seconds. This inspired an optimization in ChromeOS to cache the upper half between calls, moving 3 reads to 2. ...but we can do better! Having a 32-bit timer that flips every 178 seconds is more than sufficient for Linux. Let's just use the lower half of the MCT. Times on 5420 to do 1000000 gettimeofday() calls from userspace: * Original code: 1323852 us * ChromeOS cache upper half: 1173084 us * ChromeOS + ldmia to optimize: 1045674 us * Use lower 32-bit only (this code): 1014429 us As you can see, the time used doesn't increase linearly with the number of reads and we can make 64-bit work almost as fast as 32-bit with a bit of assembly code. But since there's no real gain for 64-bit, let's go with the simplest and fastest implementation. Note: with this change roughly half the time for gettimeofday() is spent in exynos_frc_read(). The rest is timer / system call overhead. Also note: this patch disables the use of the MCT on ARM64 systems until we've sorted out how to make "cycles_t" always 32-bit. Really ARM64 systems should be using arch timers anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-05 05:43:26 +08:00
BUILD_BUG_ON_MSG(sizeof(cycles_t) != sizeof(u32),
"cycles_t needs to move to 32-bit for ARM64 usage");
return exynos4_read_count_32();
}
static void __init exynos4_clocksource_init(void)
{
exynos4_mct_frc_start();
exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer;
exynos4_delay_timer.freq = clk_rate;
register_current_timer_delay(&exynos4_delay_timer);
if (clocksource_register_hz(&mct_frc, clk_rate))
panic("%s: can't register clocksource\n", mct_frc.name);
clocksource: exynos_mct: Only use 32-bits where possible The MCT has a nice 64-bit counter. That means that we _can_ register as a 64-bit clocksource and sched_clock. ...but that doesn't mean we should. The 64-bit counter is read by reading two 32-bit registers. That means reading needs to be something like: - Read upper half - Read lower half - Read upper half and confirm that it hasn't changed. That wouldn't be terrible, but: - THe MCT isn't very fast to access (hundreds of nanoseconds). - The clocksource is queried _all the time_. In total system profiles of real workloads on ChromeOS, we've seen exynos_frc_read() taking 2% or more of CPU time even after optimizing the 3 reads above to 2 (see below). The MCT is clocked at ~24MHz on all known systems. That means that the 32-bit half of the counter rolls over every ~178 seconds. This inspired an optimization in ChromeOS to cache the upper half between calls, moving 3 reads to 2. ...but we can do better! Having a 32-bit timer that flips every 178 seconds is more than sufficient for Linux. Let's just use the lower half of the MCT. Times on 5420 to do 1000000 gettimeofday() calls from userspace: * Original code: 1323852 us * ChromeOS cache upper half: 1173084 us * ChromeOS + ldmia to optimize: 1045674 us * Use lower 32-bit only (this code): 1014429 us As you can see, the time used doesn't increase linearly with the number of reads and we can make 64-bit work almost as fast as 32-bit with a bit of assembly code. But since there's no real gain for 64-bit, let's go with the simplest and fastest implementation. Note: with this change roughly half the time for gettimeofday() is spent in exynos_frc_read(). The rest is timer / system call overhead. Also note: this patch disables the use of the MCT on ARM64 systems until we've sorted out how to make "cycles_t" always 32-bit. Really ARM64 systems should be using arch timers anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-05 05:43:26 +08:00
sched_clock_register(exynos4_read_sched_clock, 32, clk_rate);
}
static void exynos4_mct_comp0_stop(void)
{
unsigned int tcon;
tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB);
}
static void exynos4_mct_comp0_start(bool periodic, unsigned long cycles)
{
unsigned int tcon;
cycle_t comp_cycle;
tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
if (periodic) {
tcon |= MCT_G_TCON_COMP0_AUTO_INC;
exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
}
clocksource: exynos_mct: Only use 32-bits where possible The MCT has a nice 64-bit counter. That means that we _can_ register as a 64-bit clocksource and sched_clock. ...but that doesn't mean we should. The 64-bit counter is read by reading two 32-bit registers. That means reading needs to be something like: - Read upper half - Read lower half - Read upper half and confirm that it hasn't changed. That wouldn't be terrible, but: - THe MCT isn't very fast to access (hundreds of nanoseconds). - The clocksource is queried _all the time_. In total system profiles of real workloads on ChromeOS, we've seen exynos_frc_read() taking 2% or more of CPU time even after optimizing the 3 reads above to 2 (see below). The MCT is clocked at ~24MHz on all known systems. That means that the 32-bit half of the counter rolls over every ~178 seconds. This inspired an optimization in ChromeOS to cache the upper half between calls, moving 3 reads to 2. ...but we can do better! Having a 32-bit timer that flips every 178 seconds is more than sufficient for Linux. Let's just use the lower half of the MCT. Times on 5420 to do 1000000 gettimeofday() calls from userspace: * Original code: 1323852 us * ChromeOS cache upper half: 1173084 us * ChromeOS + ldmia to optimize: 1045674 us * Use lower 32-bit only (this code): 1014429 us As you can see, the time used doesn't increase linearly with the number of reads and we can make 64-bit work almost as fast as 32-bit with a bit of assembly code. But since there's no real gain for 64-bit, let's go with the simplest and fastest implementation. Note: with this change roughly half the time for gettimeofday() is spent in exynos_frc_read(). The rest is timer / system call overhead. Also note: this patch disables the use of the MCT on ARM64 systems until we've sorted out how to make "cycles_t" always 32-bit. Really ARM64 systems should be using arch timers anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-05 05:43:26 +08:00
comp_cycle = exynos4_read_count_64() + cycles;
exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L);
exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U);
exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB);
tcon |= MCT_G_TCON_COMP0_ENABLE;
exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON);
}
static int exynos4_comp_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
exynos4_mct_comp0_start(false, cycles);
return 0;
}
static int mct_set_state_shutdown(struct clock_event_device *evt)
{
exynos4_mct_comp0_stop();
return 0;
}
static int mct_set_state_periodic(struct clock_event_device *evt)
{
unsigned long cycles_per_jiffy;
cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
>> evt->shift);
exynos4_mct_comp0_stop();
exynos4_mct_comp0_start(true, cycles_per_jiffy);
return 0;
}
static struct clock_event_device mct_comp_device = {
.name = "mct-comp",
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
.rating = 250,
.set_next_event = exynos4_comp_set_next_event,
.set_state_periodic = mct_set_state_periodic,
.set_state_shutdown = mct_set_state_shutdown,
.set_state_oneshot = mct_set_state_shutdown,
.tick_resume = mct_set_state_shutdown,
};
static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction mct_comp_event_irq = {
.name = "mct_comp_irq",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = exynos4_mct_comp_isr,
.dev_id = &mct_comp_device,
};
static void exynos4_clockevent_init(void)
{
mct_comp_device.cpumask = cpumask_of(0);
clockevents_config_and_register(&mct_comp_device, clk_rate,
0xf, 0xffffffff);
setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
}
static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
/* Clock event handling */
static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
{
unsigned long tmp;
unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
tmp = readl_relaxed(reg_base + offset);
if (tmp & mask) {
tmp &= ~mask;
exynos4_mct_write(tmp, offset);
}
}
static void exynos4_mct_tick_start(unsigned long cycles,
struct mct_clock_event_device *mevt)
{
unsigned long tmp;
exynos4_mct_tick_stop(mevt);
tmp = (1 << 31) | cycles; /* MCT_L_UPDATE_ICNTB */
/* update interrupt count buffer */
exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
/* enable MCT tick interrupt */
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
tmp = readl_relaxed(reg_base + mevt->base + MCT_L_TCON_OFFSET);
tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
MCT_L_TCON_INTERVAL_MODE;
exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
}
static int exynos4_tick_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
struct mct_clock_event_device *mevt;
mevt = container_of(evt, struct mct_clock_event_device, evt);
exynos4_mct_tick_start(cycles, mevt);
return 0;
}
static int set_state_shutdown(struct clock_event_device *evt)
{
struct mct_clock_event_device *mevt;
mevt = container_of(evt, struct mct_clock_event_device, evt);
exynos4_mct_tick_stop(mevt);
return 0;
}
static int set_state_periodic(struct clock_event_device *evt)
{
struct mct_clock_event_device *mevt;
unsigned long cycles_per_jiffy;
mevt = container_of(evt, struct mct_clock_event_device, evt);
cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
>> evt->shift);
exynos4_mct_tick_stop(mevt);
exynos4_mct_tick_start(cycles_per_jiffy, mevt);
return 0;
}
static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
{
/*
* This is for supporting oneshot mode.
* Mct would generate interrupt periodically
* without explicit stopping.
*/
if (!clockevent_state_periodic(&mevt->evt))
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1)
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
}
static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
{
struct mct_clock_event_device *mevt = dev_id;
struct clock_event_device *evt = &mevt->evt;
exynos4_mct_tick_clear(mevt);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static int exynos4_local_timer_setup(struct mct_clock_event_device *mevt)
{
struct clock_event_device *evt = &mevt->evt;
unsigned int cpu = smp_processor_id();
mevt->base = EXYNOS4_MCT_L_BASE(cpu);
snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d", cpu);
evt->name = mevt->name;
evt->cpumask = cpumask_of(cpu);
evt->set_next_event = exynos4_tick_set_next_event;
evt->set_state_periodic = set_state_periodic;
evt->set_state_shutdown = set_state_shutdown;
evt->set_state_oneshot = set_state_shutdown;
evt->tick_resume = set_state_shutdown;
evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
evt->rating = 450;
exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
if (mct_int_type == MCT_INT_SPI) {
clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier Whilst testing cpu hotplug events on kernel configured with DEBUG_PREEMPT and DEBUG_ATOMIC_SLEEP we get following BUG message, caused by calling request_irq() and free_irq() in the context of hotplug notification (which is in this case atomic context). [ 40.785859] CPU1: Software reset [ 40.786660] BUG: sleeping function called from invalid context at mm/slub.c:1241 [ 40.786668] in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/1 [ 40.786678] Preemption disabled at:[< (null)>] (null) [ 40.786681] [ 40.786692] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc4-00024-g7dca860 #36 [ 40.786698] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 40.786728] [<c0014a00>] (unwind_backtrace) from [<c0011980>] (show_stack+0x10/0x14) [ 40.786747] [<c0011980>] (show_stack) from [<c0449ba0>] (dump_stack+0x70/0xbc) [ 40.786767] [<c0449ba0>] (dump_stack) from [<c00c6124>] (kmem_cache_alloc+0xd8/0x170) [ 40.786785] [<c00c6124>] (kmem_cache_alloc) from [<c005d6f8>] (request_threaded_irq+0x64/0x128) [ 40.786804] [<c005d6f8>] (request_threaded_irq) from [<c0350b8c>] (exynos4_local_timer_setup+0xc0/0x13c) [ 40.786820] [<c0350b8c>] (exynos4_local_timer_setup) from [<c0350ca8>] (exynos4_mct_cpu_notify+0x30/0xa8) [ 40.786838] [<c0350ca8>] (exynos4_mct_cpu_notify) from [<c003b330>] (notifier_call_chain+0x44/0x84) [ 40.786857] [<c003b330>] (notifier_call_chain) from [<c0022fd4>] (__cpu_notify+0x28/0x44) [ 40.786873] [<c0022fd4>] (__cpu_notify) from [<c0013714>] (secondary_start_kernel+0xec/0x150) [ 40.786886] [<c0013714>] (secondary_start_kernel) from [<40008764>] (0x40008764) Interrupts cannot be requested/freed in the CPU_STARTING/CPU_DYING notifications which run on the hotplugged cpu with interrupts and preemption disabled. To avoid the issue, request the interrupts for all possible cpus in the boot code. The interrupts are marked NO_AUTOENABLE to avoid a racy request_irq/disable_irq() sequence. The flag prevents the request_irq() code from enabling the interrupt immediately. The interrupt is then enabled in the CPU_STARTING notifier of the hotplugged cpu and again disabled with disable_irq_nosync() in the CPU_DYING notifier. [ tglx: Massaged changelog to match the patch ] Fixes: 7114cd749a12 ("clocksource: exynos_mct: use (request/free)_irq calls for local timer registration") Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Marcin Jabrzyk <m.jabrzyk@samsung.com> Signed-off-by: Damian Eppel <d.eppel@samsung.com> Cc: m.szyprowski@samsung.com Cc: kyungmin.park@samsung.com Cc: daniel.lezcano@linaro.org Cc: kgene@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1435324984-7328-1-git-send-email-d.eppel@samsung.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org>
2015-06-26 21:23:04 +08:00
if (evt->irq == -1)
return -EIO;
clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier Whilst testing cpu hotplug events on kernel configured with DEBUG_PREEMPT and DEBUG_ATOMIC_SLEEP we get following BUG message, caused by calling request_irq() and free_irq() in the context of hotplug notification (which is in this case atomic context). [ 40.785859] CPU1: Software reset [ 40.786660] BUG: sleeping function called from invalid context at mm/slub.c:1241 [ 40.786668] in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/1 [ 40.786678] Preemption disabled at:[< (null)>] (null) [ 40.786681] [ 40.786692] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc4-00024-g7dca860 #36 [ 40.786698] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 40.786728] [<c0014a00>] (unwind_backtrace) from [<c0011980>] (show_stack+0x10/0x14) [ 40.786747] [<c0011980>] (show_stack) from [<c0449ba0>] (dump_stack+0x70/0xbc) [ 40.786767] [<c0449ba0>] (dump_stack) from [<c00c6124>] (kmem_cache_alloc+0xd8/0x170) [ 40.786785] [<c00c6124>] (kmem_cache_alloc) from [<c005d6f8>] (request_threaded_irq+0x64/0x128) [ 40.786804] [<c005d6f8>] (request_threaded_irq) from [<c0350b8c>] (exynos4_local_timer_setup+0xc0/0x13c) [ 40.786820] [<c0350b8c>] (exynos4_local_timer_setup) from [<c0350ca8>] (exynos4_mct_cpu_notify+0x30/0xa8) [ 40.786838] [<c0350ca8>] (exynos4_mct_cpu_notify) from [<c003b330>] (notifier_call_chain+0x44/0x84) [ 40.786857] [<c003b330>] (notifier_call_chain) from [<c0022fd4>] (__cpu_notify+0x28/0x44) [ 40.786873] [<c0022fd4>] (__cpu_notify) from [<c0013714>] (secondary_start_kernel+0xec/0x150) [ 40.786886] [<c0013714>] (secondary_start_kernel) from [<40008764>] (0x40008764) Interrupts cannot be requested/freed in the CPU_STARTING/CPU_DYING notifications which run on the hotplugged cpu with interrupts and preemption disabled. To avoid the issue, request the interrupts for all possible cpus in the boot code. The interrupts are marked NO_AUTOENABLE to avoid a racy request_irq/disable_irq() sequence. The flag prevents the request_irq() code from enabling the interrupt immediately. The interrupt is then enabled in the CPU_STARTING notifier of the hotplugged cpu and again disabled with disable_irq_nosync() in the CPU_DYING notifier. [ tglx: Massaged changelog to match the patch ] Fixes: 7114cd749a12 ("clocksource: exynos_mct: use (request/free)_irq calls for local timer registration") Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Marcin Jabrzyk <m.jabrzyk@samsung.com> Signed-off-by: Damian Eppel <d.eppel@samsung.com> Cc: m.szyprowski@samsung.com Cc: kyungmin.park@samsung.com Cc: daniel.lezcano@linaro.org Cc: kgene@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1435324984-7328-1-git-send-email-d.eppel@samsung.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org>
2015-06-26 21:23:04 +08:00
irq_force_affinity(evt->irq, cpumask_of(cpu));
enable_irq(evt->irq);
} else {
enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
}
clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
0xf, 0x7fffffff);
return 0;
}
static void exynos4_local_timer_stop(struct mct_clock_event_device *mevt)
{
struct clock_event_device *evt = &mevt->evt;
evt->set_state_shutdown(evt);
clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier Whilst testing cpu hotplug events on kernel configured with DEBUG_PREEMPT and DEBUG_ATOMIC_SLEEP we get following BUG message, caused by calling request_irq() and free_irq() in the context of hotplug notification (which is in this case atomic context). [ 40.785859] CPU1: Software reset [ 40.786660] BUG: sleeping function called from invalid context at mm/slub.c:1241 [ 40.786668] in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/1 [ 40.786678] Preemption disabled at:[< (null)>] (null) [ 40.786681] [ 40.786692] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc4-00024-g7dca860 #36 [ 40.786698] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 40.786728] [<c0014a00>] (unwind_backtrace) from [<c0011980>] (show_stack+0x10/0x14) [ 40.786747] [<c0011980>] (show_stack) from [<c0449ba0>] (dump_stack+0x70/0xbc) [ 40.786767] [<c0449ba0>] (dump_stack) from [<c00c6124>] (kmem_cache_alloc+0xd8/0x170) [ 40.786785] [<c00c6124>] (kmem_cache_alloc) from [<c005d6f8>] (request_threaded_irq+0x64/0x128) [ 40.786804] [<c005d6f8>] (request_threaded_irq) from [<c0350b8c>] (exynos4_local_timer_setup+0xc0/0x13c) [ 40.786820] [<c0350b8c>] (exynos4_local_timer_setup) from [<c0350ca8>] (exynos4_mct_cpu_notify+0x30/0xa8) [ 40.786838] [<c0350ca8>] (exynos4_mct_cpu_notify) from [<c003b330>] (notifier_call_chain+0x44/0x84) [ 40.786857] [<c003b330>] (notifier_call_chain) from [<c0022fd4>] (__cpu_notify+0x28/0x44) [ 40.786873] [<c0022fd4>] (__cpu_notify) from [<c0013714>] (secondary_start_kernel+0xec/0x150) [ 40.786886] [<c0013714>] (secondary_start_kernel) from [<40008764>] (0x40008764) Interrupts cannot be requested/freed in the CPU_STARTING/CPU_DYING notifications which run on the hotplugged cpu with interrupts and preemption disabled. To avoid the issue, request the interrupts for all possible cpus in the boot code. The interrupts are marked NO_AUTOENABLE to avoid a racy request_irq/disable_irq() sequence. The flag prevents the request_irq() code from enabling the interrupt immediately. The interrupt is then enabled in the CPU_STARTING notifier of the hotplugged cpu and again disabled with disable_irq_nosync() in the CPU_DYING notifier. [ tglx: Massaged changelog to match the patch ] Fixes: 7114cd749a12 ("clocksource: exynos_mct: use (request/free)_irq calls for local timer registration") Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Marcin Jabrzyk <m.jabrzyk@samsung.com> Signed-off-by: Damian Eppel <d.eppel@samsung.com> Cc: m.szyprowski@samsung.com Cc: kyungmin.park@samsung.com Cc: daniel.lezcano@linaro.org Cc: kgene@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1435324984-7328-1-git-send-email-d.eppel@samsung.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org>
2015-06-26 21:23:04 +08:00
if (mct_int_type == MCT_INT_SPI) {
if (evt->irq != -1)
disable_irq_nosync(evt->irq);
} else {
disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier Whilst testing cpu hotplug events on kernel configured with DEBUG_PREEMPT and DEBUG_ATOMIC_SLEEP we get following BUG message, caused by calling request_irq() and free_irq() in the context of hotplug notification (which is in this case atomic context). [ 40.785859] CPU1: Software reset [ 40.786660] BUG: sleeping function called from invalid context at mm/slub.c:1241 [ 40.786668] in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/1 [ 40.786678] Preemption disabled at:[< (null)>] (null) [ 40.786681] [ 40.786692] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc4-00024-g7dca860 #36 [ 40.786698] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 40.786728] [<c0014a00>] (unwind_backtrace) from [<c0011980>] (show_stack+0x10/0x14) [ 40.786747] [<c0011980>] (show_stack) from [<c0449ba0>] (dump_stack+0x70/0xbc) [ 40.786767] [<c0449ba0>] (dump_stack) from [<c00c6124>] (kmem_cache_alloc+0xd8/0x170) [ 40.786785] [<c00c6124>] (kmem_cache_alloc) from [<c005d6f8>] (request_threaded_irq+0x64/0x128) [ 40.786804] [<c005d6f8>] (request_threaded_irq) from [<c0350b8c>] (exynos4_local_timer_setup+0xc0/0x13c) [ 40.786820] [<c0350b8c>] (exynos4_local_timer_setup) from [<c0350ca8>] (exynos4_mct_cpu_notify+0x30/0xa8) [ 40.786838] [<c0350ca8>] (exynos4_mct_cpu_notify) from [<c003b330>] (notifier_call_chain+0x44/0x84) [ 40.786857] [<c003b330>] (notifier_call_chain) from [<c0022fd4>] (__cpu_notify+0x28/0x44) [ 40.786873] [<c0022fd4>] (__cpu_notify) from [<c0013714>] (secondary_start_kernel+0xec/0x150) [ 40.786886] [<c0013714>] (secondary_start_kernel) from [<40008764>] (0x40008764) Interrupts cannot be requested/freed in the CPU_STARTING/CPU_DYING notifications which run on the hotplugged cpu with interrupts and preemption disabled. To avoid the issue, request the interrupts for all possible cpus in the boot code. The interrupts are marked NO_AUTOENABLE to avoid a racy request_irq/disable_irq() sequence. The flag prevents the request_irq() code from enabling the interrupt immediately. The interrupt is then enabled in the CPU_STARTING notifier of the hotplugged cpu and again disabled with disable_irq_nosync() in the CPU_DYING notifier. [ tglx: Massaged changelog to match the patch ] Fixes: 7114cd749a12 ("clocksource: exynos_mct: use (request/free)_irq calls for local timer registration") Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Marcin Jabrzyk <m.jabrzyk@samsung.com> Signed-off-by: Damian Eppel <d.eppel@samsung.com> Cc: m.szyprowski@samsung.com Cc: kyungmin.park@samsung.com Cc: daniel.lezcano@linaro.org Cc: kgene@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1435324984-7328-1-git-send-email-d.eppel@samsung.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org>
2015-06-26 21:23:04 +08:00
}
}
Now that we have a generic arch hook for broadcast we can remove the local timer API entirely. Doing so will reduce code in ARM core, reduce the architecture dependencies of our timer drivers, and simplify the code because we no longer go through an architecture layer that is essentially a hotplug notifier. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iQIcBAABCAAGBQJRydGwAAoJENidgRMleOc9tMMP/Awy0ETkLHQkXdFdRNLQH7Jd BpDagzBkpt/U/qsh2Dy5Yhz7Qf/HQg6CwJK/b1apHguSPzNcSov+YS7ArPV+kuDY 9OCF5wkVqPW7BPHlxJ+2QAjayIFUaBR+35kpiU+hv9Gkhs11oK90iAWxEIDUGzA6 5miuOVJeyDEwV8des3NYmVVOKziHLJjX3fjMVnc2gxE6PLmOEUQ9t42bVU1aCfub pRMUXNuG+aFk8lRExPfs4wWfEKCOHrgJPSE4OPFp3pDJeqhFi5tXTiPBQ22FpNf5 78fEDeguS0QS6f/3rGKSdGu/Yz5Lmcldv4tOkfzvNaZP7zhE18wKJu6bSCrZ/Onn MnhriYWZh+YgX1V8wTMFMPEV+OR+FJdN4C8PhvNWmMC1Xoq25HtrVQUP5aElgAJs mLcgTXxLYpvZH3jPxdtMR9IuDc+86qmFerGShWqp/1YaNHwpR8dNZxFyVNfw+FUL /GoAjk/6MsJlZUchiF7I8yp4jYyMcXcV8Bi4tgIAf5rJO9PZBpuxtyAL9uVHnL13 pwkctMnMQwoP6AE9uYfbdnHCKJxF1hny4tKI5sNxAmK8I6bBkfibIZ3sNRAbSrY7 56kV+tJrrgvgAUDkgdluyS9eFs26iHGPsHK4lmzJzFylWmvWFa8tWpP6G0kCa0wP A1XCqUOryLeL8enPV+z2 =wZbm -----END PGP SIGNATURE----- Merge tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup From Stephen Boyd: Now that we have a generic arch hook for broadcast we can remove the local timer API entirely. Doing so will reduce code in ARM core, reduce the architecture dependencies of our timer drivers, and simplify the code because we no longer go through an architecture layer that is essentially a hotplug notifier. * tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: smp: Remove local timer API clocksource: time-armada-370-xp: Divorce from local timer API clocksource: time-armada-370-xp: Fix sparse warning ARM: msm: Divorce msm_timer from local timer API ARM: PRIMA2: Divorce timer-marco from local timer API ARM: EXYNOS4: Divorce mct from local timer API ARM: OMAP2+: Divorce from local timer API ARM: smp_twd: Divorce smp_twd from local timer API ARM: smp: Remove duplicate dummy timer implementation Resolved a large number of conflicts due to __cpuinit cleanups, etc. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-24 05:51:34 +08:00
static int exynos4_mct_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
struct mct_clock_event_device *mevt;
/*
* Grab cpu pointer in each case to avoid spurious
* preemptible warnings
*/
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_STARTING:
mevt = this_cpu_ptr(&percpu_mct_tick);
exynos4_local_timer_setup(mevt);
break;
case CPU_DYING:
mevt = this_cpu_ptr(&percpu_mct_tick);
exynos4_local_timer_stop(mevt);
break;
}
return NOTIFY_OK;
}
Now that we have a generic arch hook for broadcast we can remove the local timer API entirely. Doing so will reduce code in ARM core, reduce the architecture dependencies of our timer drivers, and simplify the code because we no longer go through an architecture layer that is essentially a hotplug notifier. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iQIcBAABCAAGBQJRydGwAAoJENidgRMleOc9tMMP/Awy0ETkLHQkXdFdRNLQH7Jd BpDagzBkpt/U/qsh2Dy5Yhz7Qf/HQg6CwJK/b1apHguSPzNcSov+YS7ArPV+kuDY 9OCF5wkVqPW7BPHlxJ+2QAjayIFUaBR+35kpiU+hv9Gkhs11oK90iAWxEIDUGzA6 5miuOVJeyDEwV8des3NYmVVOKziHLJjX3fjMVnc2gxE6PLmOEUQ9t42bVU1aCfub pRMUXNuG+aFk8lRExPfs4wWfEKCOHrgJPSE4OPFp3pDJeqhFi5tXTiPBQ22FpNf5 78fEDeguS0QS6f/3rGKSdGu/Yz5Lmcldv4tOkfzvNaZP7zhE18wKJu6bSCrZ/Onn MnhriYWZh+YgX1V8wTMFMPEV+OR+FJdN4C8PhvNWmMC1Xoq25HtrVQUP5aElgAJs mLcgTXxLYpvZH3jPxdtMR9IuDc+86qmFerGShWqp/1YaNHwpR8dNZxFyVNfw+FUL /GoAjk/6MsJlZUchiF7I8yp4jYyMcXcV8Bi4tgIAf5rJO9PZBpuxtyAL9uVHnL13 pwkctMnMQwoP6AE9uYfbdnHCKJxF1hny4tKI5sNxAmK8I6bBkfibIZ3sNRAbSrY7 56kV+tJrrgvgAUDkgdluyS9eFs26iHGPsHK4lmzJzFylWmvWFa8tWpP6G0kCa0wP A1XCqUOryLeL8enPV+z2 =wZbm -----END PGP SIGNATURE----- Merge tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup From Stephen Boyd: Now that we have a generic arch hook for broadcast we can remove the local timer API entirely. Doing so will reduce code in ARM core, reduce the architecture dependencies of our timer drivers, and simplify the code because we no longer go through an architecture layer that is essentially a hotplug notifier. * tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: smp: Remove local timer API clocksource: time-armada-370-xp: Divorce from local timer API clocksource: time-armada-370-xp: Fix sparse warning ARM: msm: Divorce msm_timer from local timer API ARM: PRIMA2: Divorce timer-marco from local timer API ARM: EXYNOS4: Divorce mct from local timer API ARM: OMAP2+: Divorce from local timer API ARM: smp_twd: Divorce smp_twd from local timer API ARM: smp: Remove duplicate dummy timer implementation Resolved a large number of conflicts due to __cpuinit cleanups, etc. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-24 05:51:34 +08:00
static struct notifier_block exynos4_mct_cpu_nb = {
.notifier_call = exynos4_mct_cpu_notify,
};
add suppport common clock framework for exynos -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRYuw1AAoJEA0Cl+kVi2xq53MP/Rimo8kL9e/dMrgxqvtQ198N csKzsAvOFSI69x0VupVOGfMSMDmltIaimyljJO3YrUvy+UOS3irWTHqu1JKq8+HX oaym2KirVFpGjcll4E2nyeZ18vL8Czt0bNPh2QVuHinwbETtAuq0CBfeAQLWA1Xs I/bbVKryocLwMNd5iqttSwGVwNZz14ceheliSHkneDeTaZJYQ0nSCLL7qmXncRFl Z1Xe4aZRTdiU8JZiRN6G3Q2UdhcKRwZPSZrftbVpDRBegnaZp6htUszD2GFX3SJH lV4ifgh9XVawRPE8Op00lX9fEjGe3EDP5kqqFRqht+mvr15vs2eFNiIIYOyjvBDU GfCK2Ij2QaUCiIweJOcO5SGkLKYqyVg+G5k7Z5M5FGwwBhEdZRPkZE++9cWG8K/m ziuJxAl9fK47NwUk4oz15e6JD6gFbEwqYf1f7RdvdRBiclarIuk2rha9BsoeOFM3 LBpGhWW4rcwEH87e0MjkvoopYl4ZHLtiZYk6cEg0rmAxKLvQjdZCZM+A707RG6DC CZiY6Iu5pSOIz4FweY42mXaANkdBlzn4r7/cPJj7S4umQlkEjYtwXEEziK50lc+g b7aZEvztQhFDw3lHhFeR44FCy7a1r5NjAZASshHJ72h3xNXrp+9bbugpbkdQVUKj tpL2eMZQn/lK6T1h8SwE =JEIy -----END PGP SIGNATURE----- Merge tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add suppport common clock framework for exynos * tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (73 commits) ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: exynos5250: register display block gate clocks to common clock framework clk: exynos4: Add support for SoC-specific register save list clk: exynos4: Add missing registers to suspend save list clk: exynos4: Remove E4X12 prefix from SRC_DMC register clk: exynos4: Add E4210 prefix to GATE_IP_PERIR register clk: exynos4: Add E4210 prefix to LCD1 clock registers clk: exynos4: Remove SoC-specific registers from save list clk: exynos4: Use SRC_MASK_PERIL{0,1} definitions clk: exynos4: Define {E,V}PLL registers clk: exynos4: Add missing mout_sata on Exynos4210 clk: exynos4: Add missing CMU_TOP and ISP clocks clk: exynos4: Add G3D clocks clk: exynos4: Add camera related clock definitions clk: exynos4: Export mout_core clock of Exynos4210 clk: samsung: Remove unimplemented ops for pll clk: exynos4: Export clocks used by exynos cpufreq drivers ... [arnd: add missing #address-cells property in mshc DT node] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-10 04:24:06 +08:00
static void __init exynos4_timer_resources(struct device_node *np, void __iomem *base)
{
clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier Whilst testing cpu hotplug events on kernel configured with DEBUG_PREEMPT and DEBUG_ATOMIC_SLEEP we get following BUG message, caused by calling request_irq() and free_irq() in the context of hotplug notification (which is in this case atomic context). [ 40.785859] CPU1: Software reset [ 40.786660] BUG: sleeping function called from invalid context at mm/slub.c:1241 [ 40.786668] in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/1 [ 40.786678] Preemption disabled at:[< (null)>] (null) [ 40.786681] [ 40.786692] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc4-00024-g7dca860 #36 [ 40.786698] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 40.786728] [<c0014a00>] (unwind_backtrace) from [<c0011980>] (show_stack+0x10/0x14) [ 40.786747] [<c0011980>] (show_stack) from [<c0449ba0>] (dump_stack+0x70/0xbc) [ 40.786767] [<c0449ba0>] (dump_stack) from [<c00c6124>] (kmem_cache_alloc+0xd8/0x170) [ 40.786785] [<c00c6124>] (kmem_cache_alloc) from [<c005d6f8>] (request_threaded_irq+0x64/0x128) [ 40.786804] [<c005d6f8>] (request_threaded_irq) from [<c0350b8c>] (exynos4_local_timer_setup+0xc0/0x13c) [ 40.786820] [<c0350b8c>] (exynos4_local_timer_setup) from [<c0350ca8>] (exynos4_mct_cpu_notify+0x30/0xa8) [ 40.786838] [<c0350ca8>] (exynos4_mct_cpu_notify) from [<c003b330>] (notifier_call_chain+0x44/0x84) [ 40.786857] [<c003b330>] (notifier_call_chain) from [<c0022fd4>] (__cpu_notify+0x28/0x44) [ 40.786873] [<c0022fd4>] (__cpu_notify) from [<c0013714>] (secondary_start_kernel+0xec/0x150) [ 40.786886] [<c0013714>] (secondary_start_kernel) from [<40008764>] (0x40008764) Interrupts cannot be requested/freed in the CPU_STARTING/CPU_DYING notifications which run on the hotplugged cpu with interrupts and preemption disabled. To avoid the issue, request the interrupts for all possible cpus in the boot code. The interrupts are marked NO_AUTOENABLE to avoid a racy request_irq/disable_irq() sequence. The flag prevents the request_irq() code from enabling the interrupt immediately. The interrupt is then enabled in the CPU_STARTING notifier of the hotplugged cpu and again disabled with disable_irq_nosync() in the CPU_DYING notifier. [ tglx: Massaged changelog to match the patch ] Fixes: 7114cd749a12 ("clocksource: exynos_mct: use (request/free)_irq calls for local timer registration") Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Marcin Jabrzyk <m.jabrzyk@samsung.com> Signed-off-by: Damian Eppel <d.eppel@samsung.com> Cc: m.szyprowski@samsung.com Cc: kyungmin.park@samsung.com Cc: daniel.lezcano@linaro.org Cc: kgene@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1435324984-7328-1-git-send-email-d.eppel@samsung.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org>
2015-06-26 21:23:04 +08:00
int err, cpu;
struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
struct clk *mct_clk, *tick_clk;
tick_clk = np ? of_clk_get_by_name(np, "fin_pll") :
clk_get(NULL, "fin_pll");
if (IS_ERR(tick_clk))
panic("%s: unable to determine tick clock rate\n", __func__);
clk_rate = clk_get_rate(tick_clk);
mct_clk = np ? of_clk_get_by_name(np, "mct") : clk_get(NULL, "mct");
if (IS_ERR(mct_clk))
panic("%s: unable to retrieve mct clock instance\n", __func__);
clk_prepare_enable(mct_clk);
add support exynos mct device tree and move into drivers/clocksource -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRYugaAAoJEA0Cl+kVi2xqvi0QAKyF/UbDR6aOSIOoCzgm1iUC +F9WvvCLyJdy0y09IKEbwM+aZyzsfC7vO/9wp58ROv1AhD9f1/yk1H+O8NRS668v jt8RZlrL30ea0HkRjHRgTCS2sObCXG2pGOduX9i5XKCC4EnM9P/qNe4uJjziY8K8 FmAanWpJahe0E9szLnWDuF7hhsRkTpjrLWtYYmc1H4LXydoZnxEgGM3xjbqL+m4/ BPwlCrPtu/WsZzM7Tdx6fVIC2wryrwoH5e1EL3fI2IrWhreOtVWYzoTwUoSy7Xbz ERjQoCt3yNVmPO1TwfS9nR/bc0+j8gsFuJRzN42PsP09JFQPVt8Q1o1cpIIHWgvZ /pkJAsaBfbQgPOLNof5uHasPVSZYe38TIey782hYA0pmT1RCt46FuJ6zM9M0483q 4vysYCU/Vc3GOtAQOpsCNbsEMthRzjtjsJoZ5owDsCaiV+eNWC3VrWI2Wm1EO7Mn FUthkBY58jPM/9BdFC67ZwBPtSSUhAeZpcUXkcaNj8pgw8Rvfcip/09Vy0Uh0Ef8 A5dYZec8CNyZKECspzUTlgwyK7xiWD0r3uyr4/a413qb1pr9zdOFlZeespT9bgfI uD+tMPpJ+R9fK9BSbRw9FMx1Pe395vZRUmu9WepvQDwQDvoYSi/SVKBMYtn27Bsm CD/r/wUs1ktL2rPNcXVz =Os9U -----END PGP SIGNATURE----- Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add support exynos mct device tree and move into drivers/clocksource * tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clocksource: mct: Add terminating entry for exynos_mct_ids table clocksource: mct: Add missing semicolons in exynos_mct.c ARM: EXYNOS: move mct driver to drivers/clocksource ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5 ARM: dts: add mct device tree node for all supported Exynos SoC's ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init ARM: EXYNOS: add device tree support for MCT controller driver ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it ARM: EXYNOS: add a register base address variable in mct controller driver Conflicts: drivers/clocksource/Makefile drivers/clocksource/exynos_mct.c [arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-10 04:07:37 +08:00
reg_base = base;
if (!reg_base)
panic("%s: unable to ioremap mct address space\n", __func__);
if (mct_int_type == MCT_INT_PPI) {
err = request_percpu_irq(mct_irqs[MCT_L0_IRQ],
exynos4_mct_tick_isr, "MCT",
&percpu_mct_tick);
WARN(err, "MCT: can't request IRQ %d (%d)\n",
mct_irqs[MCT_L0_IRQ], err);
} else {
clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier Whilst testing cpu hotplug events on kernel configured with DEBUG_PREEMPT and DEBUG_ATOMIC_SLEEP we get following BUG message, caused by calling request_irq() and free_irq() in the context of hotplug notification (which is in this case atomic context). [ 40.785859] CPU1: Software reset [ 40.786660] BUG: sleeping function called from invalid context at mm/slub.c:1241 [ 40.786668] in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/1 [ 40.786678] Preemption disabled at:[< (null)>] (null) [ 40.786681] [ 40.786692] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc4-00024-g7dca860 #36 [ 40.786698] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 40.786728] [<c0014a00>] (unwind_backtrace) from [<c0011980>] (show_stack+0x10/0x14) [ 40.786747] [<c0011980>] (show_stack) from [<c0449ba0>] (dump_stack+0x70/0xbc) [ 40.786767] [<c0449ba0>] (dump_stack) from [<c00c6124>] (kmem_cache_alloc+0xd8/0x170) [ 40.786785] [<c00c6124>] (kmem_cache_alloc) from [<c005d6f8>] (request_threaded_irq+0x64/0x128) [ 40.786804] [<c005d6f8>] (request_threaded_irq) from [<c0350b8c>] (exynos4_local_timer_setup+0xc0/0x13c) [ 40.786820] [<c0350b8c>] (exynos4_local_timer_setup) from [<c0350ca8>] (exynos4_mct_cpu_notify+0x30/0xa8) [ 40.786838] [<c0350ca8>] (exynos4_mct_cpu_notify) from [<c003b330>] (notifier_call_chain+0x44/0x84) [ 40.786857] [<c003b330>] (notifier_call_chain) from [<c0022fd4>] (__cpu_notify+0x28/0x44) [ 40.786873] [<c0022fd4>] (__cpu_notify) from [<c0013714>] (secondary_start_kernel+0xec/0x150) [ 40.786886] [<c0013714>] (secondary_start_kernel) from [<40008764>] (0x40008764) Interrupts cannot be requested/freed in the CPU_STARTING/CPU_DYING notifications which run on the hotplugged cpu with interrupts and preemption disabled. To avoid the issue, request the interrupts for all possible cpus in the boot code. The interrupts are marked NO_AUTOENABLE to avoid a racy request_irq/disable_irq() sequence. The flag prevents the request_irq() code from enabling the interrupt immediately. The interrupt is then enabled in the CPU_STARTING notifier of the hotplugged cpu and again disabled with disable_irq_nosync() in the CPU_DYING notifier. [ tglx: Massaged changelog to match the patch ] Fixes: 7114cd749a12 ("clocksource: exynos_mct: use (request/free)_irq calls for local timer registration") Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Marcin Jabrzyk <m.jabrzyk@samsung.com> Signed-off-by: Damian Eppel <d.eppel@samsung.com> Cc: m.szyprowski@samsung.com Cc: kyungmin.park@samsung.com Cc: daniel.lezcano@linaro.org Cc: kgene@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1435324984-7328-1-git-send-email-d.eppel@samsung.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org>
2015-06-26 21:23:04 +08:00
for_each_possible_cpu(cpu) {
int mct_irq = mct_irqs[MCT_L0_IRQ + cpu];
struct mct_clock_event_device *pcpu_mevt =
per_cpu_ptr(&percpu_mct_tick, cpu);
pcpu_mevt->evt.irq = -1;
irq_set_status_flags(mct_irq, IRQ_NOAUTOEN);
if (request_irq(mct_irq,
exynos4_mct_tick_isr,
IRQF_TIMER | IRQF_NOBALANCING,
pcpu_mevt->name, pcpu_mevt)) {
pr_err("exynos-mct: cannot register IRQ (cpu%d)\n",
cpu);
continue;
}
pcpu_mevt->evt.irq = mct_irq;
}
}
err = register_cpu_notifier(&exynos4_mct_cpu_nb);
if (err)
goto out_irq;
/* Immediately configure the timer on the boot CPU */
exynos4_local_timer_setup(mevt);
return;
out_irq:
free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
}
add support exynos mct device tree and move into drivers/clocksource -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRYugaAAoJEA0Cl+kVi2xqvi0QAKyF/UbDR6aOSIOoCzgm1iUC +F9WvvCLyJdy0y09IKEbwM+aZyzsfC7vO/9wp58ROv1AhD9f1/yk1H+O8NRS668v jt8RZlrL30ea0HkRjHRgTCS2sObCXG2pGOduX9i5XKCC4EnM9P/qNe4uJjziY8K8 FmAanWpJahe0E9szLnWDuF7hhsRkTpjrLWtYYmc1H4LXydoZnxEgGM3xjbqL+m4/ BPwlCrPtu/WsZzM7Tdx6fVIC2wryrwoH5e1EL3fI2IrWhreOtVWYzoTwUoSy7Xbz ERjQoCt3yNVmPO1TwfS9nR/bc0+j8gsFuJRzN42PsP09JFQPVt8Q1o1cpIIHWgvZ /pkJAsaBfbQgPOLNof5uHasPVSZYe38TIey782hYA0pmT1RCt46FuJ6zM9M0483q 4vysYCU/Vc3GOtAQOpsCNbsEMthRzjtjsJoZ5owDsCaiV+eNWC3VrWI2Wm1EO7Mn FUthkBY58jPM/9BdFC67ZwBPtSSUhAeZpcUXkcaNj8pgw8Rvfcip/09Vy0Uh0Ef8 A5dYZec8CNyZKECspzUTlgwyK7xiWD0r3uyr4/a413qb1pr9zdOFlZeespT9bgfI uD+tMPpJ+R9fK9BSbRw9FMx1Pe395vZRUmu9WepvQDwQDvoYSi/SVKBMYtn27Bsm CD/r/wUs1ktL2rPNcXVz =Os9U -----END PGP SIGNATURE----- Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add support exynos mct device tree and move into drivers/clocksource * tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clocksource: mct: Add terminating entry for exynos_mct_ids table clocksource: mct: Add missing semicolons in exynos_mct.c ARM: EXYNOS: move mct driver to drivers/clocksource ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5 ARM: dts: add mct device tree node for all supported Exynos SoC's ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init ARM: EXYNOS: add device tree support for MCT controller driver ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it ARM: EXYNOS: add a register base address variable in mct controller driver Conflicts: drivers/clocksource/Makefile drivers/clocksource/exynos_mct.c [arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-10 04:07:37 +08:00
static void __init mct_init_dt(struct device_node *np, unsigned int int_type)
{
u32 nr_irqs, i;
mct_int_type = int_type;
/* This driver uses only one global timer interrupt */
mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
/*
* Find out the number of local irqs specified. The local
* timer irqs are specified after the four global timer
* irqs are specified.
*/
#ifdef CONFIG_OF
add support exynos mct device tree and move into drivers/clocksource -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRYugaAAoJEA0Cl+kVi2xqvi0QAKyF/UbDR6aOSIOoCzgm1iUC +F9WvvCLyJdy0y09IKEbwM+aZyzsfC7vO/9wp58ROv1AhD9f1/yk1H+O8NRS668v jt8RZlrL30ea0HkRjHRgTCS2sObCXG2pGOduX9i5XKCC4EnM9P/qNe4uJjziY8K8 FmAanWpJahe0E9szLnWDuF7hhsRkTpjrLWtYYmc1H4LXydoZnxEgGM3xjbqL+m4/ BPwlCrPtu/WsZzM7Tdx6fVIC2wryrwoH5e1EL3fI2IrWhreOtVWYzoTwUoSy7Xbz ERjQoCt3yNVmPO1TwfS9nR/bc0+j8gsFuJRzN42PsP09JFQPVt8Q1o1cpIIHWgvZ /pkJAsaBfbQgPOLNof5uHasPVSZYe38TIey782hYA0pmT1RCt46FuJ6zM9M0483q 4vysYCU/Vc3GOtAQOpsCNbsEMthRzjtjsJoZ5owDsCaiV+eNWC3VrWI2Wm1EO7Mn FUthkBY58jPM/9BdFC67ZwBPtSSUhAeZpcUXkcaNj8pgw8Rvfcip/09Vy0Uh0Ef8 A5dYZec8CNyZKECspzUTlgwyK7xiWD0r3uyr4/a413qb1pr9zdOFlZeespT9bgfI uD+tMPpJ+R9fK9BSbRw9FMx1Pe395vZRUmu9WepvQDwQDvoYSi/SVKBMYtn27Bsm CD/r/wUs1ktL2rPNcXVz =Os9U -----END PGP SIGNATURE----- Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add support exynos mct device tree and move into drivers/clocksource * tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clocksource: mct: Add terminating entry for exynos_mct_ids table clocksource: mct: Add missing semicolons in exynos_mct.c ARM: EXYNOS: move mct driver to drivers/clocksource ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5 ARM: dts: add mct device tree node for all supported Exynos SoC's ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init ARM: EXYNOS: add device tree support for MCT controller driver ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it ARM: EXYNOS: add a register base address variable in mct controller driver Conflicts: drivers/clocksource/Makefile drivers/clocksource/exynos_mct.c [arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-10 04:07:37 +08:00
nr_irqs = of_irq_count(np);
#else
nr_irqs = 0;
#endif
add support exynos mct device tree and move into drivers/clocksource -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRYugaAAoJEA0Cl+kVi2xqvi0QAKyF/UbDR6aOSIOoCzgm1iUC +F9WvvCLyJdy0y09IKEbwM+aZyzsfC7vO/9wp58ROv1AhD9f1/yk1H+O8NRS668v jt8RZlrL30ea0HkRjHRgTCS2sObCXG2pGOduX9i5XKCC4EnM9P/qNe4uJjziY8K8 FmAanWpJahe0E9szLnWDuF7hhsRkTpjrLWtYYmc1H4LXydoZnxEgGM3xjbqL+m4/ BPwlCrPtu/WsZzM7Tdx6fVIC2wryrwoH5e1EL3fI2IrWhreOtVWYzoTwUoSy7Xbz ERjQoCt3yNVmPO1TwfS9nR/bc0+j8gsFuJRzN42PsP09JFQPVt8Q1o1cpIIHWgvZ /pkJAsaBfbQgPOLNof5uHasPVSZYe38TIey782hYA0pmT1RCt46FuJ6zM9M0483q 4vysYCU/Vc3GOtAQOpsCNbsEMthRzjtjsJoZ5owDsCaiV+eNWC3VrWI2Wm1EO7Mn FUthkBY58jPM/9BdFC67ZwBPtSSUhAeZpcUXkcaNj8pgw8Rvfcip/09Vy0Uh0Ef8 A5dYZec8CNyZKECspzUTlgwyK7xiWD0r3uyr4/a413qb1pr9zdOFlZeespT9bgfI uD+tMPpJ+R9fK9BSbRw9FMx1Pe395vZRUmu9WepvQDwQDvoYSi/SVKBMYtn27Bsm CD/r/wUs1ktL2rPNcXVz =Os9U -----END PGP SIGNATURE----- Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add support exynos mct device tree and move into drivers/clocksource * tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clocksource: mct: Add terminating entry for exynos_mct_ids table clocksource: mct: Add missing semicolons in exynos_mct.c ARM: EXYNOS: move mct driver to drivers/clocksource ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5 ARM: dts: add mct device tree node for all supported Exynos SoC's ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init ARM: EXYNOS: add device tree support for MCT controller driver ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it ARM: EXYNOS: add a register base address variable in mct controller driver Conflicts: drivers/clocksource/Makefile drivers/clocksource/exynos_mct.c [arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-10 04:07:37 +08:00
for (i = MCT_L0_IRQ; i < nr_irqs; i++)
mct_irqs[i] = irq_of_parse_and_map(np, i);
add suppport common clock framework for exynos -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRYuw1AAoJEA0Cl+kVi2xq53MP/Rimo8kL9e/dMrgxqvtQ198N csKzsAvOFSI69x0VupVOGfMSMDmltIaimyljJO3YrUvy+UOS3irWTHqu1JKq8+HX oaym2KirVFpGjcll4E2nyeZ18vL8Czt0bNPh2QVuHinwbETtAuq0CBfeAQLWA1Xs I/bbVKryocLwMNd5iqttSwGVwNZz14ceheliSHkneDeTaZJYQ0nSCLL7qmXncRFl Z1Xe4aZRTdiU8JZiRN6G3Q2UdhcKRwZPSZrftbVpDRBegnaZp6htUszD2GFX3SJH lV4ifgh9XVawRPE8Op00lX9fEjGe3EDP5kqqFRqht+mvr15vs2eFNiIIYOyjvBDU GfCK2Ij2QaUCiIweJOcO5SGkLKYqyVg+G5k7Z5M5FGwwBhEdZRPkZE++9cWG8K/m ziuJxAl9fK47NwUk4oz15e6JD6gFbEwqYf1f7RdvdRBiclarIuk2rha9BsoeOFM3 LBpGhWW4rcwEH87e0MjkvoopYl4ZHLtiZYk6cEg0rmAxKLvQjdZCZM+A707RG6DC CZiY6Iu5pSOIz4FweY42mXaANkdBlzn4r7/cPJj7S4umQlkEjYtwXEEziK50lc+g b7aZEvztQhFDw3lHhFeR44FCy7a1r5NjAZASshHJ72h3xNXrp+9bbugpbkdQVUKj tpL2eMZQn/lK6T1h8SwE =JEIy -----END PGP SIGNATURE----- Merge tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add suppport common clock framework for exynos * tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (73 commits) ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: exynos5250: register display block gate clocks to common clock framework clk: exynos4: Add support for SoC-specific register save list clk: exynos4: Add missing registers to suspend save list clk: exynos4: Remove E4X12 prefix from SRC_DMC register clk: exynos4: Add E4210 prefix to GATE_IP_PERIR register clk: exynos4: Add E4210 prefix to LCD1 clock registers clk: exynos4: Remove SoC-specific registers from save list clk: exynos4: Use SRC_MASK_PERIL{0,1} definitions clk: exynos4: Define {E,V}PLL registers clk: exynos4: Add missing mout_sata on Exynos4210 clk: exynos4: Add missing CMU_TOP and ISP clocks clk: exynos4: Add G3D clocks clk: exynos4: Add camera related clock definitions clk: exynos4: Export mout_core clock of Exynos4210 clk: samsung: Remove unimplemented ops for pll clk: exynos4: Export clocks used by exynos cpufreq drivers ... [arnd: add missing #address-cells property in mshc DT node] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-10 04:24:06 +08:00
exynos4_timer_resources(np, of_iomap(np, 0));
exynos4_clocksource_init();
exynos4_clockevent_init();
}
add support exynos mct device tree and move into drivers/clocksource -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRYugaAAoJEA0Cl+kVi2xqvi0QAKyF/UbDR6aOSIOoCzgm1iUC +F9WvvCLyJdy0y09IKEbwM+aZyzsfC7vO/9wp58ROv1AhD9f1/yk1H+O8NRS668v jt8RZlrL30ea0HkRjHRgTCS2sObCXG2pGOduX9i5XKCC4EnM9P/qNe4uJjziY8K8 FmAanWpJahe0E9szLnWDuF7hhsRkTpjrLWtYYmc1H4LXydoZnxEgGM3xjbqL+m4/ BPwlCrPtu/WsZzM7Tdx6fVIC2wryrwoH5e1EL3fI2IrWhreOtVWYzoTwUoSy7Xbz ERjQoCt3yNVmPO1TwfS9nR/bc0+j8gsFuJRzN42PsP09JFQPVt8Q1o1cpIIHWgvZ /pkJAsaBfbQgPOLNof5uHasPVSZYe38TIey782hYA0pmT1RCt46FuJ6zM9M0483q 4vysYCU/Vc3GOtAQOpsCNbsEMthRzjtjsJoZ5owDsCaiV+eNWC3VrWI2Wm1EO7Mn FUthkBY58jPM/9BdFC67ZwBPtSSUhAeZpcUXkcaNj8pgw8Rvfcip/09Vy0Uh0Ef8 A5dYZec8CNyZKECspzUTlgwyK7xiWD0r3uyr4/a413qb1pr9zdOFlZeespT9bgfI uD+tMPpJ+R9fK9BSbRw9FMx1Pe395vZRUmu9WepvQDwQDvoYSi/SVKBMYtn27Bsm CD/r/wUs1ktL2rPNcXVz =Os9U -----END PGP SIGNATURE----- Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add support exynos mct device tree and move into drivers/clocksource * tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clocksource: mct: Add terminating entry for exynos_mct_ids table clocksource: mct: Add missing semicolons in exynos_mct.c ARM: EXYNOS: move mct driver to drivers/clocksource ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5 ARM: dts: add mct device tree node for all supported Exynos SoC's ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init ARM: EXYNOS: add device tree support for MCT controller driver ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it ARM: EXYNOS: add a register base address variable in mct controller driver Conflicts: drivers/clocksource/Makefile drivers/clocksource/exynos_mct.c [arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-10 04:07:37 +08:00
static void __init mct_init_spi(struct device_node *np)
{
return mct_init_dt(np, MCT_INT_SPI);
}
static void __init mct_init_ppi(struct device_node *np)
{
return mct_init_dt(np, MCT_INT_PPI);
}
CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);