linux/drivers/net/netdevsim/dev.c

492 lines
13 KiB
C
Raw Normal View History

netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
/*
* Copyright (c) 2018 Cumulus Networks. All rights reserved.
* Copyright (c) 2018 David Ahern <dsa@cumulusnetworks.com>
* Copyright (c) 2019 Mellanox Technologies. All rights reserved.
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
*
* This software is licensed under the GNU General License Version 2,
* June 1991 as shown in the file COPYING in the top-level directory of this
* source tree.
*
* THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE
* OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME
* THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
*/
#include <linux/debugfs.h>
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
#include <linux/device.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/random.h>
#include <linux/rtnetlink.h>
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
#include <net/devlink.h>
#include "netdevsim.h"
static struct dentry *nsim_dev_ddir;
static int nsim_dev_debugfs_init(struct nsim_dev *nsim_dev)
{
char dev_ddir_name[16];
sprintf(dev_ddir_name, DRV_NAME "%u", nsim_dev->nsim_bus_dev->dev.id);
nsim_dev->ddir = debugfs_create_dir(dev_ddir_name, nsim_dev_ddir);
if (IS_ERR_OR_NULL(nsim_dev->ddir))
return PTR_ERR_OR_ZERO(nsim_dev->ddir) ?: -EINVAL;
nsim_dev->ports_ddir = debugfs_create_dir("ports", nsim_dev->ddir);
if (IS_ERR_OR_NULL(nsim_dev->ports_ddir))
return PTR_ERR_OR_ZERO(nsim_dev->ports_ddir) ?: -EINVAL;
debugfs_create_bool("fw_update_status", 0600, nsim_dev->ddir,
&nsim_dev->fw_update_status);
return 0;
}
static void nsim_dev_debugfs_exit(struct nsim_dev *nsim_dev)
{
debugfs_remove_recursive(nsim_dev->ports_ddir);
debugfs_remove_recursive(nsim_dev->ddir);
}
static int nsim_dev_port_debugfs_init(struct nsim_dev *nsim_dev,
struct nsim_dev_port *nsim_dev_port)
{
char port_ddir_name[16];
char dev_link_name[32];
sprintf(port_ddir_name, "%u", nsim_dev_port->port_index);
nsim_dev_port->ddir = debugfs_create_dir(port_ddir_name,
nsim_dev->ports_ddir);
if (IS_ERR_OR_NULL(nsim_dev_port->ddir))
return -ENOMEM;
sprintf(dev_link_name, "../../../" DRV_NAME "%u",
nsim_dev->nsim_bus_dev->dev.id);
debugfs_create_symlink("dev", nsim_dev_port->ddir, dev_link_name);
return 0;
}
static void nsim_dev_port_debugfs_exit(struct nsim_dev_port *nsim_dev_port)
{
debugfs_remove_recursive(nsim_dev_port->ddir);
}
static u64 nsim_dev_ipv4_fib_resource_occ_get(void *priv)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct nsim_dev *nsim_dev = priv;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
return nsim_fib_get_val(nsim_dev->fib_data,
NSIM_RESOURCE_IPV4_FIB, false);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
}
static u64 nsim_dev_ipv4_fib_rules_res_occ_get(void *priv)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct nsim_dev *nsim_dev = priv;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
return nsim_fib_get_val(nsim_dev->fib_data,
NSIM_RESOURCE_IPV4_FIB_RULES, false);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
}
static u64 nsim_dev_ipv6_fib_resource_occ_get(void *priv)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct nsim_dev *nsim_dev = priv;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
return nsim_fib_get_val(nsim_dev->fib_data,
NSIM_RESOURCE_IPV6_FIB, false);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
}
static u64 nsim_dev_ipv6_fib_rules_res_occ_get(void *priv)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct nsim_dev *nsim_dev = priv;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
return nsim_fib_get_val(nsim_dev->fib_data,
NSIM_RESOURCE_IPV6_FIB_RULES, false);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
}
static int nsim_dev_resources_register(struct devlink *devlink)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
struct devlink_resource_size_params params = {
.size_max = (u64)-1,
.size_granularity = 1,
.unit = DEVLINK_RESOURCE_UNIT_ENTRY
};
int err;
u64 n;
/* Resources for IPv4 */
err = devlink_resource_register(devlink, "IPv4", (u64)-1,
NSIM_RESOURCE_IPV4,
DEVLINK_RESOURCE_ID_PARENT_TOP,
&params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv4 top resource\n");
goto out;
}
n = nsim_fib_get_val(nsim_dev->fib_data,
NSIM_RESOURCE_IPV4_FIB, true);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = devlink_resource_register(devlink, "fib", n,
NSIM_RESOURCE_IPV4_FIB,
NSIM_RESOURCE_IPV4, &params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv4 FIB resource\n");
return err;
}
n = nsim_fib_get_val(nsim_dev->fib_data,
NSIM_RESOURCE_IPV4_FIB_RULES, true);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = devlink_resource_register(devlink, "fib-rules", n,
NSIM_RESOURCE_IPV4_FIB_RULES,
NSIM_RESOURCE_IPV4, &params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv4 FIB rules resource\n");
return err;
}
/* Resources for IPv6 */
err = devlink_resource_register(devlink, "IPv6", (u64)-1,
NSIM_RESOURCE_IPV6,
DEVLINK_RESOURCE_ID_PARENT_TOP,
&params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv6 top resource\n");
goto out;
}
n = nsim_fib_get_val(nsim_dev->fib_data,
NSIM_RESOURCE_IPV6_FIB, true);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = devlink_resource_register(devlink, "fib", n,
NSIM_RESOURCE_IPV6_FIB,
NSIM_RESOURCE_IPV6, &params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv6 FIB resource\n");
return err;
}
n = nsim_fib_get_val(nsim_dev->fib_data,
NSIM_RESOURCE_IPV6_FIB_RULES, true);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = devlink_resource_register(devlink, "fib-rules", n,
NSIM_RESOURCE_IPV6_FIB_RULES,
NSIM_RESOURCE_IPV6, &params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv6 FIB rules resource\n");
return err;
}
devlink_resource_occ_get_register(devlink,
NSIM_RESOURCE_IPV4_FIB,
nsim_dev_ipv4_fib_resource_occ_get,
nsim_dev);
devlink_resource_occ_get_register(devlink,
NSIM_RESOURCE_IPV4_FIB_RULES,
nsim_dev_ipv4_fib_rules_res_occ_get,
nsim_dev);
devlink_resource_occ_get_register(devlink,
NSIM_RESOURCE_IPV6_FIB,
nsim_dev_ipv6_fib_resource_occ_get,
nsim_dev);
devlink_resource_occ_get_register(devlink,
NSIM_RESOURCE_IPV6_FIB_RULES,
nsim_dev_ipv6_fib_rules_res_occ_get,
nsim_dev);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
out:
return err;
}
static int nsim_dev_reload(struct devlink *devlink,
struct netlink_ext_ack *extack)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
enum nsim_resource_id res_ids[] = {
NSIM_RESOURCE_IPV4_FIB, NSIM_RESOURCE_IPV4_FIB_RULES,
NSIM_RESOURCE_IPV6_FIB, NSIM_RESOURCE_IPV6_FIB_RULES
};
int i;
for (i = 0; i < ARRAY_SIZE(res_ids); ++i) {
int err;
u64 val;
err = devlink_resource_size_get(devlink, res_ids[i], &val);
if (!err) {
err = nsim_fib_set_max(nsim_dev->fib_data,
res_ids[i], val, extack);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err)
return err;
}
}
return 0;
}
#define NSIM_DEV_FLASH_SIZE 500000
#define NSIM_DEV_FLASH_CHUNK_SIZE 1000
#define NSIM_DEV_FLASH_CHUNK_TIME_MS 10
static int nsim_dev_flash_update(struct devlink *devlink, const char *file_name,
const char *component,
struct netlink_ext_ack *extack)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
int i;
if (nsim_dev->fw_update_status) {
devlink_flash_update_begin_notify(devlink);
devlink_flash_update_status_notify(devlink,
"Preparing to flash",
component, 0, 0);
}
for (i = 0; i < NSIM_DEV_FLASH_SIZE / NSIM_DEV_FLASH_CHUNK_SIZE; i++) {
if (nsim_dev->fw_update_status)
devlink_flash_update_status_notify(devlink, "Flashing",
component,
i * NSIM_DEV_FLASH_CHUNK_SIZE,
NSIM_DEV_FLASH_SIZE);
msleep(NSIM_DEV_FLASH_CHUNK_TIME_MS);
}
if (nsim_dev->fw_update_status) {
devlink_flash_update_status_notify(devlink, "Flashing",
component,
NSIM_DEV_FLASH_SIZE,
NSIM_DEV_FLASH_SIZE);
devlink_flash_update_status_notify(devlink, "Flashing done",
component, 0, 0);
devlink_flash_update_end_notify(devlink);
}
return 0;
}
static const struct devlink_ops nsim_dev_devlink_ops = {
.reload = nsim_dev_reload,
.flash_update = nsim_dev_flash_update,
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
};
static struct nsim_dev *
nsim_dev_create(struct nsim_bus_dev *nsim_bus_dev, unsigned int port_count)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct nsim_dev *nsim_dev;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
struct devlink *devlink;
int err;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
devlink = devlink_alloc(&nsim_dev_devlink_ops, sizeof(*nsim_dev));
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (!devlink)
return ERR_PTR(-ENOMEM);
nsim_dev = devlink_priv(devlink);
nsim_dev->nsim_bus_dev = nsim_bus_dev;
nsim_dev->switch_id.id_len = sizeof(nsim_dev->switch_id.id);
get_random_bytes(nsim_dev->switch_id.id, nsim_dev->switch_id.id_len);
INIT_LIST_HEAD(&nsim_dev->port_list);
mutex_init(&nsim_dev->port_list_lock);
nsim_dev->fw_update_status = true;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
nsim_dev->fib_data = nsim_fib_create();
if (IS_ERR(nsim_dev->fib_data)) {
err = PTR_ERR(nsim_dev->fib_data);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
goto err_devlink_free;
}
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = nsim_dev_resources_register(devlink);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err)
goto err_fib_destroy;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = devlink_register(devlink, &nsim_bus_dev->dev);
if (err)
goto err_resources_unregister;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = nsim_dev_debugfs_init(nsim_dev);
if (err)
goto err_dl_unregister;
err = nsim_bpf_dev_init(nsim_dev);
if (err)
goto err_debugfs_exit;
return nsim_dev;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err_debugfs_exit:
nsim_dev_debugfs_exit(nsim_dev);
err_dl_unregister:
devlink_unregister(devlink);
err_resources_unregister:
devlink_resources_unregister(devlink, NULL);
err_fib_destroy:
nsim_fib_destroy(nsim_dev->fib_data);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err_devlink_free:
devlink_free(devlink);
return ERR_PTR(err);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
}
static void nsim_dev_destroy(struct nsim_dev *nsim_dev)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct devlink *devlink = priv_to_devlink(nsim_dev);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
nsim_bpf_dev_exit(nsim_dev);
nsim_dev_debugfs_exit(nsim_dev);
devlink_unregister(devlink);
devlink_resources_unregister(devlink, NULL);
nsim_fib_destroy(nsim_dev->fib_data);
mutex_destroy(&nsim_dev->port_list_lock);
devlink_free(devlink);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
}
static int __nsim_dev_port_add(struct nsim_dev *nsim_dev,
unsigned int port_index)
{
struct nsim_dev_port *nsim_dev_port;
struct devlink_port *devlink_port;
int err;
nsim_dev_port = kzalloc(sizeof(*nsim_dev_port), GFP_KERNEL);
if (!nsim_dev_port)
return -ENOMEM;
nsim_dev_port->port_index = port_index;
devlink_port = &nsim_dev_port->devlink_port;
devlink_port_attrs_set(devlink_port, DEVLINK_PORT_FLAVOUR_PHYSICAL,
port_index + 1, 0, 0,
nsim_dev->switch_id.id,
nsim_dev->switch_id.id_len);
err = devlink_port_register(priv_to_devlink(nsim_dev), devlink_port,
port_index);
if (err)
goto err_port_free;
err = nsim_dev_port_debugfs_init(nsim_dev, nsim_dev_port);
if (err)
goto err_dl_port_unregister;
nsim_dev_port->ns = nsim_create(nsim_dev, nsim_dev_port);
if (IS_ERR(nsim_dev_port->ns)) {
err = PTR_ERR(nsim_dev_port->ns);
goto err_port_debugfs_exit;
}
devlink_port_type_eth_set(devlink_port, nsim_dev_port->ns->netdev);
list_add(&nsim_dev_port->list, &nsim_dev->port_list);
return 0;
err_port_debugfs_exit:
nsim_dev_port_debugfs_exit(nsim_dev_port);
err_dl_port_unregister:
devlink_port_unregister(devlink_port);
err_port_free:
kfree(nsim_dev_port);
return err;
}
static void __nsim_dev_port_del(struct nsim_dev_port *nsim_dev_port)
{
struct devlink_port *devlink_port = &nsim_dev_port->devlink_port;
list_del(&nsim_dev_port->list);
devlink_port_type_clear(devlink_port);
nsim_destroy(nsim_dev_port->ns);
nsim_dev_port_debugfs_exit(nsim_dev_port);
devlink_port_unregister(devlink_port);
kfree(nsim_dev_port);
}
static void nsim_dev_port_del_all(struct nsim_dev *nsim_dev)
{
struct nsim_dev_port *nsim_dev_port, *tmp;
list_for_each_entry_safe(nsim_dev_port, tmp,
&nsim_dev->port_list, list)
__nsim_dev_port_del(nsim_dev_port);
}
int nsim_dev_probe(struct nsim_bus_dev *nsim_bus_dev)
{
struct nsim_dev *nsim_dev;
int i;
int err;
nsim_dev = nsim_dev_create(nsim_bus_dev, nsim_bus_dev->port_count);
if (IS_ERR(nsim_dev))
return PTR_ERR(nsim_dev);
dev_set_drvdata(&nsim_bus_dev->dev, nsim_dev);
for (i = 0; i < nsim_bus_dev->port_count; i++) {
err = __nsim_dev_port_add(nsim_dev, i);
if (err)
goto err_port_del_all;
}
return 0;
err_port_del_all:
nsim_dev_port_del_all(nsim_dev);
nsim_dev_destroy(nsim_dev);
return err;
}
void nsim_dev_remove(struct nsim_bus_dev *nsim_bus_dev)
{
struct nsim_dev *nsim_dev = dev_get_drvdata(&nsim_bus_dev->dev);
nsim_dev_port_del_all(nsim_dev);
nsim_dev_destroy(nsim_dev);
}
static struct nsim_dev_port *
__nsim_dev_port_lookup(struct nsim_dev *nsim_dev, unsigned int port_index)
{
struct nsim_dev_port *nsim_dev_port;
list_for_each_entry(nsim_dev_port, &nsim_dev->port_list, list)
if (nsim_dev_port->port_index == port_index)
return nsim_dev_port;
return NULL;
}
int nsim_dev_port_add(struct nsim_bus_dev *nsim_bus_dev,
unsigned int port_index)
{
struct nsim_dev *nsim_dev = dev_get_drvdata(&nsim_bus_dev->dev);
int err;
mutex_lock(&nsim_dev->port_list_lock);
if (__nsim_dev_port_lookup(nsim_dev, port_index))
err = -EEXIST;
else
err = __nsim_dev_port_add(nsim_dev, port_index);
mutex_unlock(&nsim_dev->port_list_lock);
return err;
}
int nsim_dev_port_del(struct nsim_bus_dev *nsim_bus_dev,
unsigned int port_index)
{
struct nsim_dev *nsim_dev = dev_get_drvdata(&nsim_bus_dev->dev);
struct nsim_dev_port *nsim_dev_port;
int err = 0;
mutex_lock(&nsim_dev->port_list_lock);
nsim_dev_port = __nsim_dev_port_lookup(nsim_dev, port_index);
if (!nsim_dev_port)
err = -ENOENT;
else
__nsim_dev_port_del(nsim_dev_port);
mutex_unlock(&nsim_dev->port_list_lock);
return err;
}
int nsim_dev_init(void)
{
nsim_dev_ddir = debugfs_create_dir(DRV_NAME, NULL);
if (IS_ERR_OR_NULL(nsim_dev_ddir))
return -ENOMEM;
return 0;
}
void nsim_dev_exit(void)
{
debugfs_remove_recursive(nsim_dev_ddir);
}