linux/drivers/hwmon/asus_rog_ryujin.c

610 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* hwmon driver for Asus ROG Ryujin II 360 AIO cooler.
*
* Copyright 2024 Aleksa Savic <savicaleksa83@gmail.com>
*/
#include <linux/debugfs.h>
#include <linux/hid.h>
#include <linux/hwmon.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/unaligned.h>
#define DRIVER_NAME "asus_rog_ryujin"
#define USB_VENDOR_ID_ASUS_ROG 0x0b05
#define USB_PRODUCT_ID_RYUJIN_AIO 0x1988 /* ASUS ROG RYUJIN II 360 */
#define STATUS_VALIDITY 1500 /* ms */
#define MAX_REPORT_LENGTH 65
/* Cooler status report offsets */
#define RYUJIN_TEMP_SENSOR_1 3
#define RYUJIN_TEMP_SENSOR_2 4
#define RYUJIN_PUMP_SPEED 5
#define RYUJIN_INTERNAL_FAN_SPEED 7
/* Cooler duty report offsets */
#define RYUJIN_PUMP_DUTY 4
#define RYUJIN_INTERNAL_FAN_DUTY 5
/* Controller status (speeds) report offsets */
#define RYUJIN_CONTROLLER_SPEED_1 5
#define RYUJIN_CONTROLLER_SPEED_2 7
#define RYUJIN_CONTROLLER_SPEED_3 9
#define RYUJIN_CONTROLLER_SPEED_4 3
/* Controller duty report offsets */
#define RYUJIN_CONTROLLER_DUTY 4
/* Control commands and their inner offsets */
#define RYUJIN_CMD_PREFIX 0xEC
static const u8 get_cooler_status_cmd[] = { RYUJIN_CMD_PREFIX, 0x99 };
static const u8 get_cooler_duty_cmd[] = { RYUJIN_CMD_PREFIX, 0x9A };
static const u8 get_controller_speed_cmd[] = { RYUJIN_CMD_PREFIX, 0xA0 };
static const u8 get_controller_duty_cmd[] = { RYUJIN_CMD_PREFIX, 0xA1 };
#define RYUJIN_SET_COOLER_PUMP_DUTY_OFFSET 3
#define RYUJIN_SET_COOLER_FAN_DUTY_OFFSET 4
static const u8 set_cooler_duty_cmd[] = { RYUJIN_CMD_PREFIX, 0x1A, 0x00, 0x00, 0x00 };
#define RYUJIN_SET_CONTROLLER_FAN_DUTY_OFFSET 4
static const u8 set_controller_duty_cmd[] = { RYUJIN_CMD_PREFIX, 0x21, 0x00, 0x00, 0x00 };
/* Command lengths */
#define GET_CMD_LENGTH 2 /* Same length for all get commands */
#define SET_CMD_LENGTH 5 /* Same length for all set commands */
/* Command response headers */
#define RYUJIN_GET_COOLER_STATUS_CMD_RESPONSE 0x19
#define RYUJIN_GET_COOLER_DUTY_CMD_RESPONSE 0x1A
#define RYUJIN_GET_CONTROLLER_SPEED_CMD_RESPONSE 0x20
#define RYUJIN_GET_CONTROLLER_DUTY_CMD_RESPONSE 0x21
static const char *const rog_ryujin_temp_label[] = {
"Coolant temp"
};
static const char *const rog_ryujin_speed_label[] = {
"Pump speed",
"Internal fan speed",
"Controller fan 1 speed",
"Controller fan 2 speed",
"Controller fan 3 speed",
"Controller fan 4 speed",
};
struct rog_ryujin_data {
struct hid_device *hdev;
struct device *hwmon_dev;
/* For locking access to buffer */
struct mutex buffer_lock;
/* For queueing multiple readers */
struct mutex status_report_request_mutex;
/* For reinitializing the completions below */
spinlock_t status_report_request_lock;
struct completion cooler_status_received;
struct completion controller_status_received;
struct completion cooler_duty_received;
struct completion controller_duty_received;
struct completion cooler_duty_set;
struct completion controller_duty_set;
/* Sensor data */
s32 temp_input[1];
u16 speed_input[6]; /* Pump, internal fan and four controller fan speeds in RPM */
u8 duty_input[3]; /* Pump, internal fan and controller fan duty in PWM */
u8 *buffer;
unsigned long updated; /* jiffies */
};
static int rog_ryujin_percent_to_pwm(u16 val)
{
return DIV_ROUND_CLOSEST(val * 255, 100);
}
static int rog_ryujin_pwm_to_percent(long val)
{
return DIV_ROUND_CLOSEST(val * 100, 255);
}
static umode_t rog_ryujin_is_visible(const void *data,
enum hwmon_sensor_types type, u32 attr, int channel)
{
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_label:
case hwmon_temp_input:
return 0444;
default:
break;
}
break;
case hwmon_fan:
switch (attr) {
case hwmon_fan_label:
case hwmon_fan_input:
return 0444;
default:
break;
}
break;
case hwmon_pwm:
switch (attr) {
case hwmon_pwm_input:
return 0644;
default:
break;
}
break;
default:
break;
}
return 0;
}
/* Writes the command to the device with the rest of the report filled with zeroes */
static int rog_ryujin_write_expanded(struct rog_ryujin_data *priv, const u8 *cmd, int cmd_length)
{
int ret;
mutex_lock(&priv->buffer_lock);
memcpy_and_pad(priv->buffer, MAX_REPORT_LENGTH, cmd, cmd_length, 0x00);
ret = hid_hw_output_report(priv->hdev, priv->buffer, MAX_REPORT_LENGTH);
mutex_unlock(&priv->buffer_lock);
return ret;
}
/* Assumes priv->status_report_request_mutex is locked */
static int rog_ryujin_execute_cmd(struct rog_ryujin_data *priv, const u8 *cmd, int cmd_length,
struct completion *status_completion)
{
int ret;
/*
* Disable raw event parsing for a moment to safely reinitialize the
* completion. Reinit is done because hidraw could have triggered
* the raw event parsing and marked the passed in completion as done.
*/
spin_lock_bh(&priv->status_report_request_lock);
reinit_completion(status_completion);
spin_unlock_bh(&priv->status_report_request_lock);
/* Send command for getting data */
ret = rog_ryujin_write_expanded(priv, cmd, cmd_length);
if (ret < 0)
return ret;
ret = wait_for_completion_interruptible_timeout(status_completion,
msecs_to_jiffies(STATUS_VALIDITY));
if (ret == 0)
return -ETIMEDOUT;
else if (ret < 0)
return ret;
return 0;
}
static int rog_ryujin_get_status(struct rog_ryujin_data *priv)
{
int ret = mutex_lock_interruptible(&priv->status_report_request_mutex);
if (ret < 0)
return ret;
if (!time_after(jiffies, priv->updated + msecs_to_jiffies(STATUS_VALIDITY))) {
/* Data is up to date */
goto unlock_and_return;
}
/* Retrieve cooler status */
ret =
rog_ryujin_execute_cmd(priv, get_cooler_status_cmd, GET_CMD_LENGTH,
&priv->cooler_status_received);
if (ret < 0)
goto unlock_and_return;
/* Retrieve controller status (speeds) */
ret =
rog_ryujin_execute_cmd(priv, get_controller_speed_cmd, GET_CMD_LENGTH,
&priv->controller_status_received);
if (ret < 0)
goto unlock_and_return;
/* Retrieve cooler duty */
ret =
rog_ryujin_execute_cmd(priv, get_cooler_duty_cmd, GET_CMD_LENGTH,
&priv->cooler_duty_received);
if (ret < 0)
goto unlock_and_return;
/* Retrieve controller duty */
ret =
rog_ryujin_execute_cmd(priv, get_controller_duty_cmd, GET_CMD_LENGTH,
&priv->controller_duty_received);
if (ret < 0)
goto unlock_and_return;
priv->updated = jiffies;
unlock_and_return:
mutex_unlock(&priv->status_report_request_mutex);
if (ret < 0)
return ret;
return 0;
}
static int rog_ryujin_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
struct rog_ryujin_data *priv = dev_get_drvdata(dev);
int ret = rog_ryujin_get_status(priv);
if (ret < 0)
return ret;
switch (type) {
case hwmon_temp:
*val = priv->temp_input[channel];
break;
case hwmon_fan:
*val = priv->speed_input[channel];
break;
case hwmon_pwm:
switch (attr) {
case hwmon_pwm_input:
*val = priv->duty_input[channel];
break;
default:
return -EOPNOTSUPP;
}
break;
default:
return -EOPNOTSUPP; /* unreachable */
}
return 0;
}
static int rog_ryujin_read_string(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, const char **str)
{
switch (type) {
case hwmon_temp:
*str = rog_ryujin_temp_label[channel];
break;
case hwmon_fan:
*str = rog_ryujin_speed_label[channel];
break;
default:
return -EOPNOTSUPP; /* unreachable */
}
return 0;
}
static int rog_ryujin_write_fixed_duty(struct rog_ryujin_data *priv, int channel, int val)
{
u8 set_cmd[SET_CMD_LENGTH];
int ret;
if (channel < 2) {
/*
* Retrieve cooler duty since both pump and internal fan are set
* together, then write back with one of them modified.
*/
ret = mutex_lock_interruptible(&priv->status_report_request_mutex);
if (ret < 0)
return ret;
ret =
rog_ryujin_execute_cmd(priv, get_cooler_duty_cmd, GET_CMD_LENGTH,
&priv->cooler_duty_received);
if (ret < 0)
goto unlock_and_return;
memcpy(set_cmd, set_cooler_duty_cmd, SET_CMD_LENGTH);
/* Cooler duties are set as 0-100% */
val = rog_ryujin_pwm_to_percent(val);
if (channel == 0) {
/* Cooler pump duty */
set_cmd[RYUJIN_SET_COOLER_PUMP_DUTY_OFFSET] = val;
set_cmd[RYUJIN_SET_COOLER_FAN_DUTY_OFFSET] =
rog_ryujin_pwm_to_percent(priv->duty_input[1]);
} else if (channel == 1) {
/* Cooler internal fan duty */
set_cmd[RYUJIN_SET_COOLER_PUMP_DUTY_OFFSET] =
rog_ryujin_pwm_to_percent(priv->duty_input[0]);
set_cmd[RYUJIN_SET_COOLER_FAN_DUTY_OFFSET] = val;
}
ret = rog_ryujin_execute_cmd(priv, set_cmd, SET_CMD_LENGTH, &priv->cooler_duty_set);
unlock_and_return:
mutex_unlock(&priv->status_report_request_mutex);
if (ret < 0)
return ret;
} else {
/*
* Controller fan duty (channel == 2). No need to retrieve current
* duty, so just send the command.
*/
memcpy(set_cmd, set_controller_duty_cmd, SET_CMD_LENGTH);
set_cmd[RYUJIN_SET_CONTROLLER_FAN_DUTY_OFFSET] = val;
ret =
rog_ryujin_execute_cmd(priv, set_cmd, SET_CMD_LENGTH,
&priv->controller_duty_set);
if (ret < 0)
return ret;
}
/* Lock onto this value until next refresh cycle */
priv->duty_input[channel] = val;
return 0;
}
static int rog_ryujin_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
long val)
{
struct rog_ryujin_data *priv = dev_get_drvdata(dev);
int ret;
switch (type) {
case hwmon_pwm:
switch (attr) {
case hwmon_pwm_input:
if (val < 0 || val > 255)
return -EINVAL;
ret = rog_ryujin_write_fixed_duty(priv, channel, val);
if (ret < 0)
return ret;
break;
default:
return -EOPNOTSUPP;
}
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static const struct hwmon_ops rog_ryujin_hwmon_ops = {
.is_visible = rog_ryujin_is_visible,
.read = rog_ryujin_read,
.read_string = rog_ryujin_read_string,
.write = rog_ryujin_write
};
static const struct hwmon_channel_info *rog_ryujin_info[] = {
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT | HWMON_T_LABEL),
HWMON_CHANNEL_INFO(fan,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL),
HWMON_CHANNEL_INFO(pwm,
HWMON_PWM_INPUT,
HWMON_PWM_INPUT,
HWMON_PWM_INPUT),
NULL
};
static const struct hwmon_chip_info rog_ryujin_chip_info = {
.ops = &rog_ryujin_hwmon_ops,
.info = rog_ryujin_info,
};
static int rog_ryujin_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
int size)
{
struct rog_ryujin_data *priv = hid_get_drvdata(hdev);
if (data[0] != RYUJIN_CMD_PREFIX)
return 0;
if (data[1] == RYUJIN_GET_COOLER_STATUS_CMD_RESPONSE) {
/* Received coolant temp and speeds of pump and internal fan */
priv->temp_input[0] =
data[RYUJIN_TEMP_SENSOR_1] * 1000 + data[RYUJIN_TEMP_SENSOR_2] * 100;
priv->speed_input[0] = get_unaligned_le16(data + RYUJIN_PUMP_SPEED);
priv->speed_input[1] = get_unaligned_le16(data + RYUJIN_INTERNAL_FAN_SPEED);
if (!completion_done(&priv->cooler_status_received))
complete_all(&priv->cooler_status_received);
} else if (data[1] == RYUJIN_GET_CONTROLLER_SPEED_CMD_RESPONSE) {
/* Received speeds of four fans attached to the controller */
priv->speed_input[2] = get_unaligned_le16(data + RYUJIN_CONTROLLER_SPEED_1);
priv->speed_input[3] = get_unaligned_le16(data + RYUJIN_CONTROLLER_SPEED_2);
priv->speed_input[4] = get_unaligned_le16(data + RYUJIN_CONTROLLER_SPEED_3);
priv->speed_input[5] = get_unaligned_le16(data + RYUJIN_CONTROLLER_SPEED_4);
if (!completion_done(&priv->controller_status_received))
complete_all(&priv->controller_status_received);
} else if (data[1] == RYUJIN_GET_COOLER_DUTY_CMD_RESPONSE) {
/* Received report for pump and internal fan duties (in %) */
if (data[RYUJIN_PUMP_DUTY] == 0 && data[RYUJIN_INTERNAL_FAN_DUTY] == 0) {
/*
* We received a report with zeroes for duty in both places.
* The device returns this as a confirmation that setting values
* is successful. If we initiated a write, mark it as complete.
*/
if (!completion_done(&priv->cooler_duty_set))
complete_all(&priv->cooler_duty_set);
else if (!completion_done(&priv->cooler_duty_received))
/*
* We didn't initiate a write, but received both zeroes.
* This means that either both duties are actually zero,
* or that we received a success report caused by userspace.
* We're expecting a report, so parse it.
*/
goto read_cooler_duty;
return 0;
}
read_cooler_duty:
priv->duty_input[0] = rog_ryujin_percent_to_pwm(data[RYUJIN_PUMP_DUTY]);
priv->duty_input[1] = rog_ryujin_percent_to_pwm(data[RYUJIN_INTERNAL_FAN_DUTY]);
if (!completion_done(&priv->cooler_duty_received))
complete_all(&priv->cooler_duty_received);
} else if (data[1] == RYUJIN_GET_CONTROLLER_DUTY_CMD_RESPONSE) {
/* Received report for controller duty for fans (in PWM) */
if (data[RYUJIN_CONTROLLER_DUTY] == 0) {
/*
* We received a report with a zero for duty. The device returns this as
* a confirmation that setting the controller duty value was successful.
* If we initiated a write, mark it as complete.
*/
if (!completion_done(&priv->controller_duty_set))
complete_all(&priv->controller_duty_set);
else if (!completion_done(&priv->controller_duty_received))
/*
* We didn't initiate a write, but received a zero for duty.
* This means that either the duty is actually zero, or that
* we received a success report caused by userspace.
* We're expecting a report, so parse it.
*/
goto read_controller_duty;
return 0;
}
read_controller_duty:
priv->duty_input[2] = data[RYUJIN_CONTROLLER_DUTY];
if (!completion_done(&priv->controller_duty_received))
complete_all(&priv->controller_duty_received);
}
return 0;
}
static int rog_ryujin_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct rog_ryujin_data *priv;
int ret;
priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->hdev = hdev;
hid_set_drvdata(hdev, priv);
/*
* Initialize priv->updated to STATUS_VALIDITY seconds in the past, making
* the initial empty data invalid for rog_ryujin_read() without the need for
* a special case there.
*/
priv->updated = jiffies - msecs_to_jiffies(STATUS_VALIDITY);
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "hid parse failed with %d\n", ret);
return ret;
}
/* Enable hidraw so existing user-space tools can continue to work */
ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
if (ret) {
hid_err(hdev, "hid hw start failed with %d\n", ret);
return ret;
}
ret = hid_hw_open(hdev);
if (ret) {
hid_err(hdev, "hid hw open failed with %d\n", ret);
goto fail_and_stop;
}
priv->buffer = devm_kzalloc(&hdev->dev, MAX_REPORT_LENGTH, GFP_KERNEL);
if (!priv->buffer) {
ret = -ENOMEM;
goto fail_and_close;
}
mutex_init(&priv->status_report_request_mutex);
mutex_init(&priv->buffer_lock);
spin_lock_init(&priv->status_report_request_lock);
init_completion(&priv->cooler_status_received);
init_completion(&priv->controller_status_received);
init_completion(&priv->cooler_duty_received);
init_completion(&priv->controller_duty_received);
init_completion(&priv->cooler_duty_set);
init_completion(&priv->controller_duty_set);
priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "rog_ryujin",
priv, &rog_ryujin_chip_info, NULL);
if (IS_ERR(priv->hwmon_dev)) {
ret = PTR_ERR(priv->hwmon_dev);
hid_err(hdev, "hwmon registration failed with %d\n", ret);
goto fail_and_close;
}
return 0;
fail_and_close:
hid_hw_close(hdev);
fail_and_stop:
hid_hw_stop(hdev);
return ret;
}
static void rog_ryujin_remove(struct hid_device *hdev)
{
struct rog_ryujin_data *priv = hid_get_drvdata(hdev);
hwmon_device_unregister(priv->hwmon_dev);
hid_hw_close(hdev);
hid_hw_stop(hdev);
}
static const struct hid_device_id rog_ryujin_table[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS_ROG, USB_PRODUCT_ID_RYUJIN_AIO) },
{ }
};
MODULE_DEVICE_TABLE(hid, rog_ryujin_table);
static struct hid_driver rog_ryujin_driver = {
.name = "rog_ryujin",
.id_table = rog_ryujin_table,
.probe = rog_ryujin_probe,
.remove = rog_ryujin_remove,
.raw_event = rog_ryujin_raw_event,
};
static int __init rog_ryujin_init(void)
{
return hid_register_driver(&rog_ryujin_driver);
}
static void __exit rog_ryujin_exit(void)
{
hid_unregister_driver(&rog_ryujin_driver);
}
/* When compiled into the kernel, initialize after the HID bus */
late_initcall(rog_ryujin_init);
module_exit(rog_ryujin_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Aleksa Savic <savicaleksa83@gmail.com>");
MODULE_DESCRIPTION("Hwmon driver for Asus ROG Ryujin II 360 AIO cooler");