linux/drivers/acpi/processor_throttling.c

1283 lines
32 KiB
C
Raw Normal View History

/*
* processor_throttling.c - Throttling submodule of the ACPI processor driver
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2004 Dominik Brodowski <linux@brodo.de>
* Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
* - Added processor hotplug support
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/cpufreq.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <acpi/acpi_bus.h>
#include <acpi/processor.h>
#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_throttling");
struct throttling_tstate {
unsigned int cpu; /* cpu nr */
int target_state; /* target T-state */
};
#define THROTTLING_PRECHANGE (1)
#define THROTTLING_POSTCHANGE (2)
static int acpi_processor_get_throttling(struct acpi_processor *pr);
int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
static int acpi_processor_update_tsd_coord(void)
{
int count, count_target;
int retval = 0;
unsigned int i, j;
cpumask_t covered_cpus;
struct acpi_processor *pr, *match_pr;
struct acpi_tsd_package *pdomain, *match_pdomain;
struct acpi_processor_throttling *pthrottling, *match_pthrottling;
/*
* Now that we have _TSD data from all CPUs, lets setup T-state
* coordination between all CPUs.
*/
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
continue;
/* Basic validity check for domain info */
pthrottling = &(pr->throttling);
/*
* If tsd package for one cpu is invalid, the coordination
* among all CPUs is thought as invalid.
* Maybe it is ugly.
*/
if (!pthrottling->tsd_valid_flag) {
retval = -EINVAL;
break;
}
}
if (retval)
goto err_ret;
cpus_clear(covered_cpus);
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
continue;
if (cpu_isset(i, covered_cpus))
continue;
pthrottling = &pr->throttling;
pdomain = &(pthrottling->domain_info);
cpu_set(i, pthrottling->shared_cpu_map);
cpu_set(i, covered_cpus);
/*
* If the number of processor in the TSD domain is 1, it is
* unnecessary to parse the coordination for this CPU.
*/
if (pdomain->num_processors <= 1)
continue;
/* Validate the Domain info */
count_target = pdomain->num_processors;
count = 1;
for_each_possible_cpu(j) {
if (i == j)
continue;
match_pr = per_cpu(processors, j);
if (!match_pr)
continue;
match_pthrottling = &(match_pr->throttling);
match_pdomain = &(match_pthrottling->domain_info);
if (match_pdomain->domain != pdomain->domain)
continue;
/* Here i and j are in the same domain.
* If two TSD packages have the same domain, they
* should have the same num_porcessors and
* coordination type. Otherwise it will be regarded
* as illegal.
*/
if (match_pdomain->num_processors != count_target) {
retval = -EINVAL;
goto err_ret;
}
if (pdomain->coord_type != match_pdomain->coord_type) {
retval = -EINVAL;
goto err_ret;
}
cpu_set(j, covered_cpus);
cpu_set(j, pthrottling->shared_cpu_map);
count++;
}
for_each_possible_cpu(j) {
if (i == j)
continue;
match_pr = per_cpu(processors, j);
if (!match_pr)
continue;
match_pthrottling = &(match_pr->throttling);
match_pdomain = &(match_pthrottling->domain_info);
if (match_pdomain->domain != pdomain->domain)
continue;
/*
* If some CPUS have the same domain, they
* will have the same shared_cpu_map.
*/
match_pthrottling->shared_cpu_map =
pthrottling->shared_cpu_map;
}
}
err_ret:
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
continue;
/*
* Assume no coordination on any error parsing domain info.
* The coordination type will be forced as SW_ALL.
*/
if (retval) {
pthrottling = &(pr->throttling);
cpus_clear(pthrottling->shared_cpu_map);
cpu_set(i, pthrottling->shared_cpu_map);
pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL;
}
}
return retval;
}
/*
* Update the T-state coordination after the _TSD
* data for all cpus is obtained.
*/
void acpi_processor_throttling_init(void)
{
if (acpi_processor_update_tsd_coord())
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Assume no T-state coordination\n"));
return;
}
static int acpi_processor_throttling_notifier(unsigned long event, void *data)
{
struct throttling_tstate *p_tstate = data;
struct acpi_processor *pr;
unsigned int cpu ;
int target_state;
struct acpi_processor_limit *p_limit;
struct acpi_processor_throttling *p_throttling;
cpu = p_tstate->cpu;
pr = per_cpu(processors, cpu);
if (!pr) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid pr pointer\n"));
return 0;
}
if (!pr->flags.throttling) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Throttling control is "
"unsupported on CPU %d\n", cpu));
return 0;
}
target_state = p_tstate->target_state;
p_throttling = &(pr->throttling);
switch (event) {
case THROTTLING_PRECHANGE:
/*
* Prechange event is used to choose one proper t-state,
* which meets the limits of thermal, user and _TPC.
*/
p_limit = &pr->limit;
if (p_limit->thermal.tx > target_state)
target_state = p_limit->thermal.tx;
if (p_limit->user.tx > target_state)
target_state = p_limit->user.tx;
if (pr->throttling_platform_limit > target_state)
target_state = pr->throttling_platform_limit;
if (target_state >= p_throttling->state_count) {
printk(KERN_WARNING
"Exceed the limit of T-state \n");
target_state = p_throttling->state_count - 1;
}
p_tstate->target_state = target_state;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PreChange Event:"
"target T-state of CPU %d is T%d\n",
cpu, target_state));
break;
case THROTTLING_POSTCHANGE:
/*
* Postchange event is only used to update the
* T-state flag of acpi_processor_throttling.
*/
p_throttling->state = target_state;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PostChange Event:"
"CPU %d is switched to T%d\n",
cpu, target_state));
break;
default:
printk(KERN_WARNING
"Unsupported Throttling notifier event\n");
break;
}
return 0;
}
/*
* _TPC - Throttling Present Capabilities
*/
static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
{
acpi_status status = 0;
unsigned long tpc = 0;
if (!pr)
return -EINVAL;
status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TPC"));
}
return -ENODEV;
}
pr->throttling_platform_limit = (int)tpc;
return 0;
}
int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
{
int result = 0;
int throttling_limit;
int current_state;
struct acpi_processor_limit *limit;
int target_state;
result = acpi_processor_get_platform_limit(pr);
if (result) {
/* Throttling Limit is unsupported */
return result;
}
throttling_limit = pr->throttling_platform_limit;
if (throttling_limit >= pr->throttling.state_count) {
/* Uncorrect Throttling Limit */
return -EINVAL;
}
current_state = pr->throttling.state;
if (current_state > throttling_limit) {
/*
* The current state can meet the requirement of
* _TPC limit. But it is reasonable that OSPM changes
* t-states from high to low for better performance.
* Of course the limit condition of thermal
* and user should be considered.
*/
limit = &pr->limit;
target_state = throttling_limit;
if (limit->thermal.tx > target_state)
target_state = limit->thermal.tx;
if (limit->user.tx > target_state)
target_state = limit->user.tx;
} else if (current_state == throttling_limit) {
/*
* Unnecessary to change the throttling state
*/
return 0;
} else {
/*
* If the current state is lower than the limit of _TPC, it
* will be forced to switch to the throttling state defined
* by throttling_platfor_limit.
* Because the previous state meets with the limit condition
* of thermal and user, it is unnecessary to check it again.
*/
target_state = throttling_limit;
}
return acpi_processor_set_throttling(pr, target_state);
}
/*
* _PTC - Processor Throttling Control (and status) register location
*/
static int acpi_processor_get_throttling_control(struct acpi_processor *pr)
{
int result = 0;
acpi_status status = 0;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *ptc = NULL;
union acpi_object obj = { 0 };
struct acpi_processor_throttling *throttling;
status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTC"));
}
return -ENODEV;
}
ptc = (union acpi_object *)buffer.pointer;
if (!ptc || (ptc->type != ACPI_TYPE_PACKAGE)
|| (ptc->package.count != 2)) {
printk(KERN_ERR PREFIX "Invalid _PTC data\n");
result = -EFAULT;
goto end;
}
/*
* control_register
*/
obj = ptc->package.elements[0];
if ((obj.type != ACPI_TYPE_BUFFER)
|| (obj.buffer.length < sizeof(struct acpi_ptc_register))
|| (obj.buffer.pointer == NULL)) {
printk(KERN_ERR PREFIX
"Invalid _PTC data (control_register)\n");
result = -EFAULT;
goto end;
}
memcpy(&pr->throttling.control_register, obj.buffer.pointer,
sizeof(struct acpi_ptc_register));
/*
* status_register
*/
obj = ptc->package.elements[1];
if ((obj.type != ACPI_TYPE_BUFFER)
|| (obj.buffer.length < sizeof(struct acpi_ptc_register))
|| (obj.buffer.pointer == NULL)) {
printk(KERN_ERR PREFIX "Invalid _PTC data (status_register)\n");
result = -EFAULT;
goto end;
}
memcpy(&pr->throttling.status_register, obj.buffer.pointer,
sizeof(struct acpi_ptc_register));
throttling = &pr->throttling;
if ((throttling->control_register.bit_width +
throttling->control_register.bit_offset) > 32) {
printk(KERN_ERR PREFIX "Invalid _PTC control register\n");
result = -EFAULT;
goto end;
}
if ((throttling->status_register.bit_width +
throttling->status_register.bit_offset) > 32) {
printk(KERN_ERR PREFIX "Invalid _PTC status register\n");
result = -EFAULT;
goto end;
}
end:
kfree(buffer.pointer);
return result;
}
/*
* _TSS - Throttling Supported States
*/
static int acpi_processor_get_throttling_states(struct acpi_processor *pr)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" };
struct acpi_buffer state = { 0, NULL };
union acpi_object *tss = NULL;
int i;
status = acpi_evaluate_object(pr->handle, "_TSS", NULL, &buffer);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSS"));
}
return -ENODEV;
}
tss = buffer.pointer;
if (!tss || (tss->type != ACPI_TYPE_PACKAGE)) {
printk(KERN_ERR PREFIX "Invalid _TSS data\n");
result = -EFAULT;
goto end;
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n",
tss->package.count));
pr->throttling.state_count = tss->package.count;
pr->throttling.states_tss =
kmalloc(sizeof(struct acpi_processor_tx_tss) * tss->package.count,
GFP_KERNEL);
if (!pr->throttling.states_tss) {
result = -ENOMEM;
goto end;
}
for (i = 0; i < pr->throttling.state_count; i++) {
struct acpi_processor_tx_tss *tx =
(struct acpi_processor_tx_tss *)&(pr->throttling.
states_tss[i]);
state.length = sizeof(struct acpi_processor_tx_tss);
state.pointer = tx;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Extracting state %d\n", i));
status = acpi_extract_package(&(tss->package.elements[i]),
&format, &state);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "Invalid _TSS data"));
result = -EFAULT;
kfree(pr->throttling.states_tss);
goto end;
}
if (!tx->freqpercentage) {
printk(KERN_ERR PREFIX
"Invalid _TSS data: freq is zero\n");
result = -EFAULT;
kfree(pr->throttling.states_tss);
goto end;
}
}
end:
kfree(buffer.pointer);
return result;
}
/*
* _TSD - T-State Dependencies
*/
static int acpi_processor_get_tsd(struct acpi_processor *pr)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" };
struct acpi_buffer state = { 0, NULL };
union acpi_object *tsd = NULL;
struct acpi_tsd_package *pdomain;
struct acpi_processor_throttling *pthrottling;
pthrottling = &pr->throttling;
pthrottling->tsd_valid_flag = 0;
status = acpi_evaluate_object(pr->handle, "_TSD", NULL, &buffer);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSD"));
}
return -ENODEV;
}
tsd = buffer.pointer;
if (!tsd || (tsd->type != ACPI_TYPE_PACKAGE)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _TSD data\n"));
result = -EFAULT;
goto end;
}
if (tsd->package.count != 1) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _TSD data\n"));
result = -EFAULT;
goto end;
}
pdomain = &(pr->throttling.domain_info);
state.length = sizeof(struct acpi_tsd_package);
state.pointer = pdomain;
status = acpi_extract_package(&(tsd->package.elements[0]),
&format, &state);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _TSD data\n"));
result = -EFAULT;
goto end;
}
if (pdomain->num_entries != ACPI_TSD_REV0_ENTRIES) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown _TSD:num_entries\n"));
result = -EFAULT;
goto end;
}
if (pdomain->revision != ACPI_TSD_REV0_REVISION) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown _TSD:revision\n"));
result = -EFAULT;
goto end;
}
pthrottling = &pr->throttling;
pthrottling->tsd_valid_flag = 1;
pthrottling->shared_type = pdomain->coord_type;
cpu_set(pr->id, pthrottling->shared_cpu_map);
/*
* If the coordination type is not defined in ACPI spec,
* the tsd_valid_flag will be clear and coordination type
* will be forecd as DOMAIN_COORD_TYPE_SW_ALL.
*/
if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL &&
pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY &&
pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) {
pthrottling->tsd_valid_flag = 0;
pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL;
}
end:
kfree(buffer.pointer);
return result;
}
/* --------------------------------------------------------------------------
Throttling Control
-------------------------------------------------------------------------- */
static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr)
{
int state = 0;
u32 value = 0;
u32 duty_mask = 0;
u32 duty_value = 0;
if (!pr)
return -EINVAL;
if (!pr->flags.throttling)
return -ENODEV;
pr->throttling.state = 0;
duty_mask = pr->throttling.state_count - 1;
duty_mask <<= pr->throttling.duty_offset;
local_irq_disable();
value = inl(pr->throttling.address);
/*
* Compute the current throttling state when throttling is enabled
* (bit 4 is on).
*/
if (value & 0x10) {
duty_value = value & duty_mask;
duty_value >>= pr->throttling.duty_offset;
if (duty_value)
state = pr->throttling.state_count - duty_value;
}
pr->throttling.state = state;
local_irq_enable();
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Throttling state is T%d (%d%% throttling applied)\n",
state, pr->throttling.states[state].performance));
return 0;
}
#ifdef CONFIG_X86
static int acpi_throttling_rdmsr(struct acpi_processor *pr,
acpi_integer * value)
{
struct cpuinfo_x86 *c;
u64 msr_high, msr_low;
unsigned int cpu;
u64 msr = 0;
int ret = -1;
cpu = pr->id;
c = &cpu_data(cpu);
if ((c->x86_vendor != X86_VENDOR_INTEL) ||
!cpu_has(c, X86_FEATURE_ACPI)) {
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
} else {
msr_low = 0;
msr_high = 0;
rdmsr_safe(MSR_IA32_THERM_CONTROL,
(u32 *)&msr_low , (u32 *) &msr_high);
msr = (msr_high << 32) | msr_low;
*value = (acpi_integer) msr;
ret = 0;
}
return ret;
}
static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value)
{
struct cpuinfo_x86 *c;
unsigned int cpu;
int ret = -1;
u64 msr;
cpu = pr->id;
c = &cpu_data(cpu);
if ((c->x86_vendor != X86_VENDOR_INTEL) ||
!cpu_has(c, X86_FEATURE_ACPI)) {
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
} else {
msr = value;
wrmsr_safe(MSR_IA32_THERM_CONTROL,
msr & 0xffffffff, msr >> 32);
ret = 0;
}
return ret;
}
#else
static int acpi_throttling_rdmsr(struct acpi_processor *pr,
acpi_integer * value)
{
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
return -1;
}
static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value)
{
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
return -1;
}
#endif
static int acpi_read_throttling_status(struct acpi_processor *pr,
acpi_integer *value)
{
u32 bit_width, bit_offset;
u64 ptc_value;
u64 ptc_mask;
struct acpi_processor_throttling *throttling;
int ret = -1;
throttling = &pr->throttling;
switch (throttling->status_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
ptc_value = 0;
bit_width = throttling->status_register.bit_width;
bit_offset = throttling->status_register.bit_offset;
acpi_os_read_port((acpi_io_address) throttling->status_register.
address, (u32 *) &ptc_value,
(u32) (bit_width + bit_offset));
ptc_mask = (1 << bit_width) - 1;
*value = (acpi_integer) ((ptc_value >> bit_offset) & ptc_mask);
ret = 0;
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
ret = acpi_throttling_rdmsr(pr, value);
break;
default:
printk(KERN_ERR PREFIX "Unknown addr space %d\n",
(u32) (throttling->status_register.space_id));
}
return ret;
}
static int acpi_write_throttling_state(struct acpi_processor *pr,
acpi_integer value)
{
u32 bit_width, bit_offset;
u64 ptc_value;
u64 ptc_mask;
struct acpi_processor_throttling *throttling;
int ret = -1;
throttling = &pr->throttling;
switch (throttling->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
bit_width = throttling->control_register.bit_width;
bit_offset = throttling->control_register.bit_offset;
ptc_mask = (1 << bit_width) - 1;
ptc_value = value & ptc_mask;
acpi_os_write_port((acpi_io_address) throttling->
control_register.address,
(u32) (ptc_value << bit_offset),
(u32) (bit_width + bit_offset));
ret = 0;
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
ret = acpi_throttling_wrmsr(pr, value);
break;
default:
printk(KERN_ERR PREFIX "Unknown addr space %d\n",
(u32) (throttling->control_register.space_id));
}
return ret;
}
static int acpi_get_throttling_state(struct acpi_processor *pr,
acpi_integer value)
{
int i;
for (i = 0; i < pr->throttling.state_count; i++) {
struct acpi_processor_tx_tss *tx =
(struct acpi_processor_tx_tss *)&(pr->throttling.
states_tss[i]);
if (tx->control == value)
break;
}
if (i > pr->throttling.state_count)
i = -1;
return i;
}
static int acpi_get_throttling_value(struct acpi_processor *pr,
int state, acpi_integer *value)
{
int ret = -1;
if (state >= 0 && state <= pr->throttling.state_count) {
struct acpi_processor_tx_tss *tx =
(struct acpi_processor_tx_tss *)&(pr->throttling.
states_tss[state]);
*value = tx->control;
ret = 0;
}
return ret;
}
static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
{
int state = 0;
int ret;
acpi_integer value;
if (!pr)
return -EINVAL;
if (!pr->flags.throttling)
return -ENODEV;
pr->throttling.state = 0;
value = 0;
ret = acpi_read_throttling_status(pr, &value);
if (ret >= 0) {
state = acpi_get_throttling_state(pr, value);
pr->throttling.state = state;
}
return 0;
}
static int acpi_processor_get_throttling(struct acpi_processor *pr)
{
cpumask_t saved_mask;
cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr * This patch replaces the dangerous lvalue version of cpumask_of_cpu with new cpumask_of_cpu_ptr macros. These are patterned after the node_to_cpumask_ptr macros. In general terms, if there is a cpumask_of_cpu_map[] then a pointer to the cpumask_of_cpu_map[cpu] entry is used. The cpumask_of_cpu_map is provided when there is a large NR_CPUS count, reducing greatly the amount of code generated and stack space used for cpumask_of_cpu(). The pointer to the cpumask_t value is needed for calling set_cpus_allowed_ptr() to reduce the amount of stack space needed to pass the cpumask_t value. If there isn't a cpumask_of_cpu_map[], then a temporary variable is declared and filled in with value from cpumask_of_cpu(cpu) as well as a pointer variable pointing to this temporary variable. Afterwards, the pointer is used to reference the cpumask value. The compiler will optimize out the extra dereference through the pointer as well as the stack space used for the pointer, resulting in identical code. A good example of the orthogonal usages is in net/sunrpc/svc.c: case SVC_POOL_PERCPU: { unsigned int cpu = m->pool_to[pidx]; cpumask_of_cpu_ptr(cpumask, cpu); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask); return 1; } case SVC_POOL_PERNODE: { unsigned int node = m->pool_to[pidx]; node_to_cpumask_ptr(nodecpumask, node); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, nodecpumask); return 1; } Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 05:14:30 +08:00
cpumask_of_cpu_ptr_declare(new_mask);
int ret;
if (!pr)
return -EINVAL;
if (!pr->flags.throttling)
return -ENODEV;
/*
* Migrate task to the cpu pointed by pr.
*/
saved_mask = current->cpus_allowed;
cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr * This patch replaces the dangerous lvalue version of cpumask_of_cpu with new cpumask_of_cpu_ptr macros. These are patterned after the node_to_cpumask_ptr macros. In general terms, if there is a cpumask_of_cpu_map[] then a pointer to the cpumask_of_cpu_map[cpu] entry is used. The cpumask_of_cpu_map is provided when there is a large NR_CPUS count, reducing greatly the amount of code generated and stack space used for cpumask_of_cpu(). The pointer to the cpumask_t value is needed for calling set_cpus_allowed_ptr() to reduce the amount of stack space needed to pass the cpumask_t value. If there isn't a cpumask_of_cpu_map[], then a temporary variable is declared and filled in with value from cpumask_of_cpu(cpu) as well as a pointer variable pointing to this temporary variable. Afterwards, the pointer is used to reference the cpumask value. The compiler will optimize out the extra dereference through the pointer as well as the stack space used for the pointer, resulting in identical code. A good example of the orthogonal usages is in net/sunrpc/svc.c: case SVC_POOL_PERCPU: { unsigned int cpu = m->pool_to[pidx]; cpumask_of_cpu_ptr(cpumask, cpu); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask); return 1; } case SVC_POOL_PERNODE: { unsigned int node = m->pool_to[pidx]; node_to_cpumask_ptr(nodecpumask, node); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, nodecpumask); return 1; } Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 05:14:30 +08:00
cpumask_of_cpu_ptr_next(new_mask, pr->id);
set_cpus_allowed_ptr(current, new_mask);
ret = pr->throttling.acpi_processor_get_throttling(pr);
/* restore the previous state */
set_cpus_allowed_ptr(current, &saved_mask);
return ret;
}
static int acpi_processor_get_fadt_info(struct acpi_processor *pr)
{
int i, step;
if (!pr->throttling.address) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n"));
return -EINVAL;
} else if (!pr->throttling.duty_width) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n"));
return -EINVAL;
}
/* TBD: Support duty_cycle values that span bit 4. */
else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) {
printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n");
return -EINVAL;
}
pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width;
/*
* Compute state values. Note that throttling displays a linear power
* performance relationship (at 50% performance the CPU will consume
* 50% power). Values are in 1/10th of a percent to preserve accuracy.
*/
step = (1000 / pr->throttling.state_count);
for (i = 0; i < pr->throttling.state_count; i++) {
pr->throttling.states[i].performance = 1000 - step * i;
pr->throttling.states[i].power = 1000 - step * i;
}
return 0;
}
static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr,
int state)
{
u32 value = 0;
u32 duty_mask = 0;
u32 duty_value = 0;
if (!pr)
return -EINVAL;
if ((state < 0) || (state > (pr->throttling.state_count - 1)))
return -EINVAL;
if (!pr->flags.throttling)
return -ENODEV;
if (state == pr->throttling.state)
return 0;
if (state < pr->throttling_platform_limit)
return -EPERM;
/*
* Calculate the duty_value and duty_mask.
*/
if (state) {
duty_value = pr->throttling.state_count - state;
duty_value <<= pr->throttling.duty_offset;
/* Used to clear all duty_value bits */
duty_mask = pr->throttling.state_count - 1;
duty_mask <<= acpi_gbl_FADT.duty_offset;
duty_mask = ~duty_mask;
}
local_irq_disable();
/*
* Disable throttling by writing a 0 to bit 4. Note that we must
* turn it off before you can change the duty_value.
*/
value = inl(pr->throttling.address);
if (value & 0x10) {
value &= 0xFFFFFFEF;
outl(value, pr->throttling.address);
}
/*
* Write the new duty_value and then enable throttling. Note
* that a state value of 0 leaves throttling disabled.
*/
if (state) {
value &= duty_mask;
value |= duty_value;
outl(value, pr->throttling.address);
value |= 0x00000010;
outl(value, pr->throttling.address);
}
pr->throttling.state = state;
local_irq_enable();
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Throttling state set to T%d (%d%%)\n", state,
(pr->throttling.states[state].performance ? pr->
throttling.states[state].performance / 10 : 0)));
return 0;
}
static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
int state)
{
int ret;
acpi_integer value;
if (!pr)
return -EINVAL;
if ((state < 0) || (state > (pr->throttling.state_count - 1)))
return -EINVAL;
if (!pr->flags.throttling)
return -ENODEV;
if (state == pr->throttling.state)
return 0;
if (state < pr->throttling_platform_limit)
return -EPERM;
value = 0;
ret = acpi_get_throttling_value(pr, state, &value);
if (ret >= 0) {
acpi_write_throttling_state(pr, value);
pr->throttling.state = state;
}
return 0;
}
int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
{
cpumask_t saved_mask;
cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr * This patch replaces the dangerous lvalue version of cpumask_of_cpu with new cpumask_of_cpu_ptr macros. These are patterned after the node_to_cpumask_ptr macros. In general terms, if there is a cpumask_of_cpu_map[] then a pointer to the cpumask_of_cpu_map[cpu] entry is used. The cpumask_of_cpu_map is provided when there is a large NR_CPUS count, reducing greatly the amount of code generated and stack space used for cpumask_of_cpu(). The pointer to the cpumask_t value is needed for calling set_cpus_allowed_ptr() to reduce the amount of stack space needed to pass the cpumask_t value. If there isn't a cpumask_of_cpu_map[], then a temporary variable is declared and filled in with value from cpumask_of_cpu(cpu) as well as a pointer variable pointing to this temporary variable. Afterwards, the pointer is used to reference the cpumask value. The compiler will optimize out the extra dereference through the pointer as well as the stack space used for the pointer, resulting in identical code. A good example of the orthogonal usages is in net/sunrpc/svc.c: case SVC_POOL_PERCPU: { unsigned int cpu = m->pool_to[pidx]; cpumask_of_cpu_ptr(cpumask, cpu); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask); return 1; } case SVC_POOL_PERNODE: { unsigned int node = m->pool_to[pidx]; node_to_cpumask_ptr(nodecpumask, node); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, nodecpumask); return 1; } Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 05:14:30 +08:00
cpumask_of_cpu_ptr_declare(new_mask);
int ret = 0;
unsigned int i;
struct acpi_processor *match_pr;
struct acpi_processor_throttling *p_throttling;
struct throttling_tstate t_state;
cpumask_t online_throttling_cpus;
if (!pr)
return -EINVAL;
if (!pr->flags.throttling)
return -ENODEV;
if ((state < 0) || (state > (pr->throttling.state_count - 1)))
return -EINVAL;
saved_mask = current->cpus_allowed;
t_state.target_state = state;
p_throttling = &(pr->throttling);
cpus_and(online_throttling_cpus, cpu_online_map,
p_throttling->shared_cpu_map);
/*
* The throttling notifier will be called for every
* affected cpu in order to get one proper T-state.
* The notifier event is THROTTLING_PRECHANGE.
*/
for_each_cpu_mask_nr(i, online_throttling_cpus) {
t_state.cpu = i;
acpi_processor_throttling_notifier(THROTTLING_PRECHANGE,
&t_state);
}
/*
* The function of acpi_processor_set_throttling will be called
* to switch T-state. If the coordination type is SW_ALL or HW_ALL,
* it is necessary to call it for every affected cpu. Otherwise
* it can be called only for the cpu pointed by pr.
*/
if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) {
cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr * This patch replaces the dangerous lvalue version of cpumask_of_cpu with new cpumask_of_cpu_ptr macros. These are patterned after the node_to_cpumask_ptr macros. In general terms, if there is a cpumask_of_cpu_map[] then a pointer to the cpumask_of_cpu_map[cpu] entry is used. The cpumask_of_cpu_map is provided when there is a large NR_CPUS count, reducing greatly the amount of code generated and stack space used for cpumask_of_cpu(). The pointer to the cpumask_t value is needed for calling set_cpus_allowed_ptr() to reduce the amount of stack space needed to pass the cpumask_t value. If there isn't a cpumask_of_cpu_map[], then a temporary variable is declared and filled in with value from cpumask_of_cpu(cpu) as well as a pointer variable pointing to this temporary variable. Afterwards, the pointer is used to reference the cpumask value. The compiler will optimize out the extra dereference through the pointer as well as the stack space used for the pointer, resulting in identical code. A good example of the orthogonal usages is in net/sunrpc/svc.c: case SVC_POOL_PERCPU: { unsigned int cpu = m->pool_to[pidx]; cpumask_of_cpu_ptr(cpumask, cpu); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask); return 1; } case SVC_POOL_PERNODE: { unsigned int node = m->pool_to[pidx]; node_to_cpumask_ptr(nodecpumask, node); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, nodecpumask); return 1; } Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 05:14:30 +08:00
cpumask_of_cpu_ptr_next(new_mask, pr->id);
set_cpus_allowed_ptr(current, new_mask);
ret = p_throttling->acpi_processor_set_throttling(pr,
t_state.target_state);
} else {
/*
* When the T-state coordination is SW_ALL or HW_ALL,
* it is necessary to set T-state for every affected
* cpus.
*/
for_each_cpu_mask_nr(i, online_throttling_cpus) {
match_pr = per_cpu(processors, i);
/*
* If the pointer is invalid, we will report the
* error message and continue.
*/
if (!match_pr) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Invalid Pointer for CPU %d\n", i));
continue;
}
/*
* If the throttling control is unsupported on CPU i,
* we will report the error message and continue.
*/
if (!match_pr->flags.throttling) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Throttling Controll is unsupported "
"on CPU %d\n", i));
continue;
}
t_state.cpu = i;
cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr * This patch replaces the dangerous lvalue version of cpumask_of_cpu with new cpumask_of_cpu_ptr macros. These are patterned after the node_to_cpumask_ptr macros. In general terms, if there is a cpumask_of_cpu_map[] then a pointer to the cpumask_of_cpu_map[cpu] entry is used. The cpumask_of_cpu_map is provided when there is a large NR_CPUS count, reducing greatly the amount of code generated and stack space used for cpumask_of_cpu(). The pointer to the cpumask_t value is needed for calling set_cpus_allowed_ptr() to reduce the amount of stack space needed to pass the cpumask_t value. If there isn't a cpumask_of_cpu_map[], then a temporary variable is declared and filled in with value from cpumask_of_cpu(cpu) as well as a pointer variable pointing to this temporary variable. Afterwards, the pointer is used to reference the cpumask value. The compiler will optimize out the extra dereference through the pointer as well as the stack space used for the pointer, resulting in identical code. A good example of the orthogonal usages is in net/sunrpc/svc.c: case SVC_POOL_PERCPU: { unsigned int cpu = m->pool_to[pidx]; cpumask_of_cpu_ptr(cpumask, cpu); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask); return 1; } case SVC_POOL_PERNODE: { unsigned int node = m->pool_to[pidx]; node_to_cpumask_ptr(nodecpumask, node); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, nodecpumask); return 1; } Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 05:14:30 +08:00
cpumask_of_cpu_ptr_next(new_mask, i);
set_cpus_allowed_ptr(current, new_mask);
ret = match_pr->throttling.
acpi_processor_set_throttling(
match_pr, t_state.target_state);
}
}
/*
* After the set_throttling is called, the
* throttling notifier is called for every
* affected cpu to update the T-states.
* The notifier event is THROTTLING_POSTCHANGE
*/
for_each_cpu_mask_nr(i, online_throttling_cpus) {
t_state.cpu = i;
acpi_processor_throttling_notifier(THROTTLING_POSTCHANGE,
&t_state);
}
/* restore the previous state */
set_cpus_allowed_ptr(current, &saved_mask);
return ret;
}
int acpi_processor_get_throttling_info(struct acpi_processor *pr)
{
int result = 0;
struct acpi_processor_throttling *pthrottling;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
pr->throttling.address,
pr->throttling.duty_offset,
pr->throttling.duty_width));
if (!pr)
return -EINVAL;
/*
* Evaluate _PTC, _TSS and _TPC
* They must all be present or none of them can be used.
*/
if (acpi_processor_get_throttling_control(pr) ||
acpi_processor_get_throttling_states(pr) ||
acpi_processor_get_platform_limit(pr))
{
pr->throttling.acpi_processor_get_throttling =
&acpi_processor_get_throttling_fadt;
pr->throttling.acpi_processor_set_throttling =
&acpi_processor_set_throttling_fadt;
if (acpi_processor_get_fadt_info(pr))
return 0;
} else {
pr->throttling.acpi_processor_get_throttling =
&acpi_processor_get_throttling_ptc;
pr->throttling.acpi_processor_set_throttling =
&acpi_processor_set_throttling_ptc;
}
/*
* If TSD package for one CPU can't be parsed successfully, it means
* that this CPU will have no coordination with other CPUs.
*/
if (acpi_processor_get_tsd(pr)) {
pthrottling = &pr->throttling;
pthrottling->tsd_valid_flag = 0;
cpu_set(pr->id, pthrottling->shared_cpu_map);
pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL;
}
/*
* PIIX4 Errata: We don't support throttling on the original PIIX4.
* This shouldn't be an issue as few (if any) mobile systems ever
* used this part.
*/
if (errata.piix4.throttle) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Throttling not supported on PIIX4 A- or B-step\n"));
return 0;
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n",
pr->throttling.state_count));
pr->flags.throttling = 1;
/*
* Disable throttling (if enabled). We'll let subsequent policy (e.g.
* thermal) decide to lower performance if it so chooses, but for now
* we'll crank up the speed.
*/
result = acpi_processor_get_throttling(pr);
if (result)
goto end;
if (pr->throttling.state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Disabling throttling (was T%d)\n",
pr->throttling.state));
result = acpi_processor_set_throttling(pr, 0);
if (result)
goto end;
}
end:
if (result)
pr->flags.throttling = 0;
return result;
}
/* proc interface */
static int acpi_processor_throttling_seq_show(struct seq_file *seq,
void *offset)
{
struct acpi_processor *pr = seq->private;
int i = 0;
int result = 0;
if (!pr)
goto end;
if (!(pr->throttling.state_count > 0)) {
seq_puts(seq, "<not supported>\n");
goto end;
}
result = acpi_processor_get_throttling(pr);
if (result) {
seq_puts(seq,
"Could not determine current throttling state.\n");
goto end;
}
seq_printf(seq, "state count: %d\n"
"active state: T%d\n"
"state available: T%d to T%d\n",
pr->throttling.state_count, pr->throttling.state,
pr->throttling_platform_limit,
pr->throttling.state_count - 1);
seq_puts(seq, "states:\n");
if (pr->throttling.acpi_processor_get_throttling ==
acpi_processor_get_throttling_fadt) {
for (i = 0; i < pr->throttling.state_count; i++)
seq_printf(seq, " %cT%d: %02d%%\n",
(i == pr->throttling.state ? '*' : ' '), i,
(pr->throttling.states[i].performance ? pr->
throttling.states[i].performance / 10 : 0));
} else {
for (i = 0; i < pr->throttling.state_count; i++)
seq_printf(seq, " %cT%d: %02d%%\n",
(i == pr->throttling.state ? '*' : ' '), i,
(int)pr->throttling.states_tss[i].
freqpercentage);
}
end:
return 0;
}
static int acpi_processor_throttling_open_fs(struct inode *inode,
struct file *file)
{
return single_open(file, acpi_processor_throttling_seq_show,
PDE(inode)->data);
}
static ssize_t acpi_processor_write_throttling(struct file *file,
const char __user * buffer,
size_t count, loff_t * data)
{
int result = 0;
struct seq_file *m = file->private_data;
struct acpi_processor *pr = m->private;
ACPI: fix processor throttling set error http://bugzilla.kernel.org/show_bug.cgi?id=9704 When echo some invalid values to /proc/acpi/processor/*/throttling, there isn't any error info returned, on the contray, it sets throttling value to some T* successfully, obviously, this is incorrect, a correct way should be to let it fail and return error info. This patch fixed the aforementioned issue, it also enables /proc/acpi/processor/*/throttling to accept such values as 't0' and 'T0', it also strictly limits /proc/acpi/processor/*/throttling only to accept "*", "t*" and "T*", "*" is the throttling state value the processor can support, current, it is 0 - 7. Before applying this patch, the test result is below: [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "1xxxxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# cd / [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T100" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "2xxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T2 state available: T0 to T7 states: T0: 100% T1: 87% *T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "7777" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost /]# echo "7xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost /]# After applying this patch, the test result is below: [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# vi drivers/acpi/processor_throttling.c [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "t7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "7000" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "xxx" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo -n > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo $? 0 [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo t0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo T0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo Tt0 > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo T > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-06-14 12:54:37 +08:00
char state_string[5] = "";
char *charp = NULL;
size_t state_val = 0;
char tmpbuf[5] = "";
if (!pr || (count > sizeof(state_string) - 1))
return -EINVAL;
if (copy_from_user(state_string, buffer, count))
return -EFAULT;
state_string[count] = '\0';
ACPI: fix processor throttling set error http://bugzilla.kernel.org/show_bug.cgi?id=9704 When echo some invalid values to /proc/acpi/processor/*/throttling, there isn't any error info returned, on the contray, it sets throttling value to some T* successfully, obviously, this is incorrect, a correct way should be to let it fail and return error info. This patch fixed the aforementioned issue, it also enables /proc/acpi/processor/*/throttling to accept such values as 't0' and 'T0', it also strictly limits /proc/acpi/processor/*/throttling only to accept "*", "t*" and "T*", "*" is the throttling state value the processor can support, current, it is 0 - 7. Before applying this patch, the test result is below: [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "1xxxxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# cd / [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T100" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "2xxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T2 state available: T0 to T7 states: T0: 100% T1: 87% *T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "7777" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost /]# echo "7xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost /]# After applying this patch, the test result is below: [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# vi drivers/acpi/processor_throttling.c [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "t7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "7000" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "xxx" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo -n > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo $? 0 [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo t0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo T0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo Tt0 > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo T > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-06-14 12:54:37 +08:00
if ((count > 0) && (state_string[count-1] == '\n'))
state_string[count-1] = '\0';
ACPI: fix processor throttling set error http://bugzilla.kernel.org/show_bug.cgi?id=9704 When echo some invalid values to /proc/acpi/processor/*/throttling, there isn't any error info returned, on the contray, it sets throttling value to some T* successfully, obviously, this is incorrect, a correct way should be to let it fail and return error info. This patch fixed the aforementioned issue, it also enables /proc/acpi/processor/*/throttling to accept such values as 't0' and 'T0', it also strictly limits /proc/acpi/processor/*/throttling only to accept "*", "t*" and "T*", "*" is the throttling state value the processor can support, current, it is 0 - 7. Before applying this patch, the test result is below: [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "1xxxxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# cd / [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T100" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "2xxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T2 state available: T0 to T7 states: T0: 100% T1: 87% *T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "7777" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost /]# echo "7xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost /]# After applying this patch, the test result is below: [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# vi drivers/acpi/processor_throttling.c [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "t7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "7000" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "xxx" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo -n > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo $? 0 [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo t0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo T0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo Tt0 > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo T > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-06-14 12:54:37 +08:00
charp = state_string;
if ((state_string[0] == 't') || (state_string[0] == 'T'))
charp++;
state_val = simple_strtoul(charp, NULL, 0);
if (state_val >= pr->throttling.state_count)
return -EINVAL;
snprintf(tmpbuf, 5, "%zu", state_val);
ACPI: fix processor throttling set error http://bugzilla.kernel.org/show_bug.cgi?id=9704 When echo some invalid values to /proc/acpi/processor/*/throttling, there isn't any error info returned, on the contray, it sets throttling value to some T* successfully, obviously, this is incorrect, a correct way should be to let it fail and return error info. This patch fixed the aforementioned issue, it also enables /proc/acpi/processor/*/throttling to accept such values as 't0' and 'T0', it also strictly limits /proc/acpi/processor/*/throttling only to accept "*", "t*" and "T*", "*" is the throttling state value the processor can support, current, it is 0 - 7. Before applying this patch, the test result is below: [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "1xxxxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# cd / [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T100" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "2xxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T2 state available: T0 to T7 states: T0: 100% T1: 87% *T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "7777" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost /]# echo "7xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost /]# After applying this patch, the test result is below: [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# vi drivers/acpi/processor_throttling.c [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "t7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "7000" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "xxx" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo -n > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo $? 0 [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo t0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo T0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo Tt0 > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo T > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-06-14 12:54:37 +08:00
if (strcmp(tmpbuf, charp) != 0)
return -EINVAL;
result = acpi_processor_set_throttling(pr, state_val);
if (result)
return result;
return count;
}
struct file_operations acpi_processor_throttling_fops = {
.owner = THIS_MODULE,
.open = acpi_processor_throttling_open_fs,
.read = seq_read,
.write = acpi_processor_write_throttling,
.llseek = seq_lseek,
.release = single_release,
};