linux/fs/nfsd/nfscache.c

630 lines
17 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Request reply cache. This is currently a global cache, but this may
* change in the future and be a per-client cache.
*
* This code is heavily inspired by the 44BSD implementation, although
* it does things a bit differently.
*
* Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
*/
#include <linux/sunrpc/svc_xprt.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/sunrpc/addr.h>
#include <linux/highmem.h>
#include <linux/log2.h>
#include <linux/hash.h>
#include <net/checksum.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include "nfsd.h"
#include "cache.h"
#include "trace.h"
/*
* We use this value to determine the number of hash buckets from the max
* cache size, the idea being that when the cache is at its maximum number
* of entries, then this should be the average number of entries per bucket.
*/
#define TARGET_BUCKET_SIZE 64
struct nfsd_drc_bucket {
struct rb_root rb_head;
struct list_head lru_head;
spinlock_t cache_lock;
};
nfsd4: make drc_slab global, not per-net I made every global per-network-namespace instead. But perhaps doing that to this slab was a step too far. The kmem_cache_create call in our net init method also seems to be responsible for this lockdep warning: [ 45.163710] Unable to find swap-space signature [ 45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap. This is not supported. [ 46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program [ 51.011723] [ 51.013378] ====================================================== [ 51.013875] WARNING: possible circular locking dependency detected [ 51.014378] 5.2.0-rc2 #1 Not tainted [ 51.014672] ------------------------------------------------------ [ 51.015182] trinity-c2/886 is trying to acquire lock: [ 51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130 [ 51.016190] [ 51.016190] but task is already holding lock: [ 51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 [ 51.017266] [ 51.017266] which lock already depends on the new lock. [ 51.017266] [ 51.017909] [ 51.017909] the existing dependency chain (in reverse order) is: [ 51.018497] [ 51.018497] -> #1 (kn->count#43){++++}: [ 51.018956] __lock_acquire+0x7cf/0x1a20 [ 51.019317] lock_acquire+0x17d/0x390 [ 51.019658] __kernfs_remove+0x892/0xae0 [ 51.020020] kernfs_remove_by_name_ns+0x78/0x110 [ 51.020435] sysfs_remove_link+0x55/0xb0 [ 51.020832] sysfs_slab_add+0xc1/0x3e0 [ 51.021332] __kmem_cache_create+0x155/0x200 [ 51.021720] create_cache+0xf5/0x320 [ 51.022054] kmem_cache_create_usercopy+0x179/0x320 [ 51.022486] kmem_cache_create+0x1a/0x30 [ 51.022867] nfsd_reply_cache_init+0x278/0x560 [ 51.023266] nfsd_init_net+0x20f/0x5e0 [ 51.023623] ops_init+0xcb/0x4b0 [ 51.023928] setup_net+0x2fe/0x670 [ 51.024315] copy_net_ns+0x30a/0x3f0 [ 51.024653] create_new_namespaces+0x3c5/0x820 [ 51.025257] unshare_nsproxy_namespaces+0xd1/0x240 [ 51.025881] ksys_unshare+0x506/0x9c0 [ 51.026381] __x64_sys_unshare+0x3a/0x50 [ 51.026937] do_syscall_64+0x110/0x10b0 [ 51.027509] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.028175] [ 51.028175] -> #0 (slab_mutex){+.+.}: [ 51.028817] validate_chain+0x1c51/0x2cc0 [ 51.029422] __lock_acquire+0x7cf/0x1a20 [ 51.029947] lock_acquire+0x17d/0x390 [ 51.030438] __mutex_lock+0x100/0xfa0 [ 51.030995] mutex_lock_nested+0x27/0x30 [ 51.031516] slab_attr_store+0xa2/0x130 [ 51.032020] sysfs_kf_write+0x11d/0x180 [ 51.032529] kernfs_fop_write+0x32a/0x500 [ 51.033056] do_loop_readv_writev+0x21d/0x310 [ 51.033627] do_iter_write+0x2e5/0x380 [ 51.034148] vfs_writev+0x170/0x310 [ 51.034616] do_pwritev+0x13e/0x160 [ 51.035100] __x64_sys_pwritev+0xa3/0x110 [ 51.035633] do_syscall_64+0x110/0x10b0 [ 51.036200] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.036924] [ 51.036924] other info that might help us debug this: [ 51.036924] [ 51.037876] Possible unsafe locking scenario: [ 51.037876] [ 51.038556] CPU0 CPU1 [ 51.039130] ---- ---- [ 51.039676] lock(kn->count#43); [ 51.040084] lock(slab_mutex); [ 51.040597] lock(kn->count#43); [ 51.041062] lock(slab_mutex); [ 51.041320] [ 51.041320] *** DEADLOCK *** [ 51.041320] [ 51.041793] 3 locks held by trinity-c2/886: [ 51.042128] #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310 [ 51.042739] #1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500 [ 51.043400] #2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 Reported-by: kernel test robot <lkp@intel.com> Fixes: 3ba75830ce17 "drc containerization" Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-06-02 05:44:45 +08:00
static struct kmem_cache *drc_slab;
static int nfsd_cache_append(struct svc_rqst *rqstp, struct kvec *vec);
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:09 +08:00
static unsigned long nfsd_reply_cache_count(struct shrinker *shrink,
struct shrink_control *sc);
static unsigned long nfsd_reply_cache_scan(struct shrinker *shrink,
struct shrink_control *sc);
/*
* Put a cap on the size of the DRC based on the amount of available
* low memory in the machine.
*
* 64MB: 8192
* 128MB: 11585
* 256MB: 16384
* 512MB: 23170
* 1GB: 32768
* 2GB: 46340
* 4GB: 65536
* 8GB: 92681
* 16GB: 131072
*
* ...with a hard cap of 256k entries. In the worst case, each entry will be
* ~1k, so the above numbers should give a rough max of the amount of memory
* used in k.
*
* XXX: these limits are per-container, so memory used will increase
* linearly with number of containers. Maybe that's OK.
*/
static unsigned int
nfsd_cache_size_limit(void)
{
unsigned int limit;
unsigned long low_pages = totalram_pages() - totalhigh_pages();
limit = (16 * int_sqrt(low_pages)) << (PAGE_SHIFT-10);
return min_t(unsigned int, limit, 256*1024);
}
/*
* Compute the number of hash buckets we need. Divide the max cachesize by
* the "target" max bucket size, and round up to next power of two.
*/
static unsigned int
nfsd_hashsize(unsigned int limit)
{
return roundup_pow_of_two(limit / TARGET_BUCKET_SIZE);
}
static struct svc_cacherep *
nfsd_reply_cache_alloc(struct svc_rqst *rqstp, __wsum csum,
struct nfsd_net *nn)
{
struct svc_cacherep *rp;
nfsd4: make drc_slab global, not per-net I made every global per-network-namespace instead. But perhaps doing that to this slab was a step too far. The kmem_cache_create call in our net init method also seems to be responsible for this lockdep warning: [ 45.163710] Unable to find swap-space signature [ 45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap. This is not supported. [ 46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program [ 51.011723] [ 51.013378] ====================================================== [ 51.013875] WARNING: possible circular locking dependency detected [ 51.014378] 5.2.0-rc2 #1 Not tainted [ 51.014672] ------------------------------------------------------ [ 51.015182] trinity-c2/886 is trying to acquire lock: [ 51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130 [ 51.016190] [ 51.016190] but task is already holding lock: [ 51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 [ 51.017266] [ 51.017266] which lock already depends on the new lock. [ 51.017266] [ 51.017909] [ 51.017909] the existing dependency chain (in reverse order) is: [ 51.018497] [ 51.018497] -> #1 (kn->count#43){++++}: [ 51.018956] __lock_acquire+0x7cf/0x1a20 [ 51.019317] lock_acquire+0x17d/0x390 [ 51.019658] __kernfs_remove+0x892/0xae0 [ 51.020020] kernfs_remove_by_name_ns+0x78/0x110 [ 51.020435] sysfs_remove_link+0x55/0xb0 [ 51.020832] sysfs_slab_add+0xc1/0x3e0 [ 51.021332] __kmem_cache_create+0x155/0x200 [ 51.021720] create_cache+0xf5/0x320 [ 51.022054] kmem_cache_create_usercopy+0x179/0x320 [ 51.022486] kmem_cache_create+0x1a/0x30 [ 51.022867] nfsd_reply_cache_init+0x278/0x560 [ 51.023266] nfsd_init_net+0x20f/0x5e0 [ 51.023623] ops_init+0xcb/0x4b0 [ 51.023928] setup_net+0x2fe/0x670 [ 51.024315] copy_net_ns+0x30a/0x3f0 [ 51.024653] create_new_namespaces+0x3c5/0x820 [ 51.025257] unshare_nsproxy_namespaces+0xd1/0x240 [ 51.025881] ksys_unshare+0x506/0x9c0 [ 51.026381] __x64_sys_unshare+0x3a/0x50 [ 51.026937] do_syscall_64+0x110/0x10b0 [ 51.027509] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.028175] [ 51.028175] -> #0 (slab_mutex){+.+.}: [ 51.028817] validate_chain+0x1c51/0x2cc0 [ 51.029422] __lock_acquire+0x7cf/0x1a20 [ 51.029947] lock_acquire+0x17d/0x390 [ 51.030438] __mutex_lock+0x100/0xfa0 [ 51.030995] mutex_lock_nested+0x27/0x30 [ 51.031516] slab_attr_store+0xa2/0x130 [ 51.032020] sysfs_kf_write+0x11d/0x180 [ 51.032529] kernfs_fop_write+0x32a/0x500 [ 51.033056] do_loop_readv_writev+0x21d/0x310 [ 51.033627] do_iter_write+0x2e5/0x380 [ 51.034148] vfs_writev+0x170/0x310 [ 51.034616] do_pwritev+0x13e/0x160 [ 51.035100] __x64_sys_pwritev+0xa3/0x110 [ 51.035633] do_syscall_64+0x110/0x10b0 [ 51.036200] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.036924] [ 51.036924] other info that might help us debug this: [ 51.036924] [ 51.037876] Possible unsafe locking scenario: [ 51.037876] [ 51.038556] CPU0 CPU1 [ 51.039130] ---- ---- [ 51.039676] lock(kn->count#43); [ 51.040084] lock(slab_mutex); [ 51.040597] lock(kn->count#43); [ 51.041062] lock(slab_mutex); [ 51.041320] [ 51.041320] *** DEADLOCK *** [ 51.041320] [ 51.041793] 3 locks held by trinity-c2/886: [ 51.042128] #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310 [ 51.042739] #1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500 [ 51.043400] #2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 Reported-by: kernel test robot <lkp@intel.com> Fixes: 3ba75830ce17 "drc containerization" Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-06-02 05:44:45 +08:00
rp = kmem_cache_alloc(drc_slab, GFP_KERNEL);
if (rp) {
rp->c_state = RC_UNUSED;
rp->c_type = RC_NOCACHE;
RB_CLEAR_NODE(&rp->c_node);
INIT_LIST_HEAD(&rp->c_lru);
memset(&rp->c_key, 0, sizeof(rp->c_key));
rp->c_key.k_xid = rqstp->rq_xid;
rp->c_key.k_proc = rqstp->rq_proc;
rpc_copy_addr((struct sockaddr *)&rp->c_key.k_addr, svc_addr(rqstp));
rpc_set_port((struct sockaddr *)&rp->c_key.k_addr, rpc_get_port(svc_addr(rqstp)));
rp->c_key.k_prot = rqstp->rq_prot;
rp->c_key.k_vers = rqstp->rq_vers;
rp->c_key.k_len = rqstp->rq_arg.len;
rp->c_key.k_csum = csum;
}
return rp;
}
static void
nfsd_reply_cache_free_locked(struct nfsd_drc_bucket *b, struct svc_cacherep *rp,
struct nfsd_net *nn)
{
if (rp->c_type == RC_REPLBUFF && rp->c_replvec.iov_base) {
nfsd_stats_drc_mem_usage_sub(nn, rp->c_replvec.iov_len);
kfree(rp->c_replvec.iov_base);
}
if (rp->c_state != RC_UNUSED) {
rb_erase(&rp->c_node, &b->rb_head);
list_del(&rp->c_lru);
atomic_dec(&nn->num_drc_entries);
nfsd_stats_drc_mem_usage_sub(nn, sizeof(*rp));
}
nfsd4: make drc_slab global, not per-net I made every global per-network-namespace instead. But perhaps doing that to this slab was a step too far. The kmem_cache_create call in our net init method also seems to be responsible for this lockdep warning: [ 45.163710] Unable to find swap-space signature [ 45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap. This is not supported. [ 46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program [ 51.011723] [ 51.013378] ====================================================== [ 51.013875] WARNING: possible circular locking dependency detected [ 51.014378] 5.2.0-rc2 #1 Not tainted [ 51.014672] ------------------------------------------------------ [ 51.015182] trinity-c2/886 is trying to acquire lock: [ 51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130 [ 51.016190] [ 51.016190] but task is already holding lock: [ 51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 [ 51.017266] [ 51.017266] which lock already depends on the new lock. [ 51.017266] [ 51.017909] [ 51.017909] the existing dependency chain (in reverse order) is: [ 51.018497] [ 51.018497] -> #1 (kn->count#43){++++}: [ 51.018956] __lock_acquire+0x7cf/0x1a20 [ 51.019317] lock_acquire+0x17d/0x390 [ 51.019658] __kernfs_remove+0x892/0xae0 [ 51.020020] kernfs_remove_by_name_ns+0x78/0x110 [ 51.020435] sysfs_remove_link+0x55/0xb0 [ 51.020832] sysfs_slab_add+0xc1/0x3e0 [ 51.021332] __kmem_cache_create+0x155/0x200 [ 51.021720] create_cache+0xf5/0x320 [ 51.022054] kmem_cache_create_usercopy+0x179/0x320 [ 51.022486] kmem_cache_create+0x1a/0x30 [ 51.022867] nfsd_reply_cache_init+0x278/0x560 [ 51.023266] nfsd_init_net+0x20f/0x5e0 [ 51.023623] ops_init+0xcb/0x4b0 [ 51.023928] setup_net+0x2fe/0x670 [ 51.024315] copy_net_ns+0x30a/0x3f0 [ 51.024653] create_new_namespaces+0x3c5/0x820 [ 51.025257] unshare_nsproxy_namespaces+0xd1/0x240 [ 51.025881] ksys_unshare+0x506/0x9c0 [ 51.026381] __x64_sys_unshare+0x3a/0x50 [ 51.026937] do_syscall_64+0x110/0x10b0 [ 51.027509] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.028175] [ 51.028175] -> #0 (slab_mutex){+.+.}: [ 51.028817] validate_chain+0x1c51/0x2cc0 [ 51.029422] __lock_acquire+0x7cf/0x1a20 [ 51.029947] lock_acquire+0x17d/0x390 [ 51.030438] __mutex_lock+0x100/0xfa0 [ 51.030995] mutex_lock_nested+0x27/0x30 [ 51.031516] slab_attr_store+0xa2/0x130 [ 51.032020] sysfs_kf_write+0x11d/0x180 [ 51.032529] kernfs_fop_write+0x32a/0x500 [ 51.033056] do_loop_readv_writev+0x21d/0x310 [ 51.033627] do_iter_write+0x2e5/0x380 [ 51.034148] vfs_writev+0x170/0x310 [ 51.034616] do_pwritev+0x13e/0x160 [ 51.035100] __x64_sys_pwritev+0xa3/0x110 [ 51.035633] do_syscall_64+0x110/0x10b0 [ 51.036200] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.036924] [ 51.036924] other info that might help us debug this: [ 51.036924] [ 51.037876] Possible unsafe locking scenario: [ 51.037876] [ 51.038556] CPU0 CPU1 [ 51.039130] ---- ---- [ 51.039676] lock(kn->count#43); [ 51.040084] lock(slab_mutex); [ 51.040597] lock(kn->count#43); [ 51.041062] lock(slab_mutex); [ 51.041320] [ 51.041320] *** DEADLOCK *** [ 51.041320] [ 51.041793] 3 locks held by trinity-c2/886: [ 51.042128] #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310 [ 51.042739] #1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500 [ 51.043400] #2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 Reported-by: kernel test robot <lkp@intel.com> Fixes: 3ba75830ce17 "drc containerization" Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-06-02 05:44:45 +08:00
kmem_cache_free(drc_slab, rp);
}
static void
nfsd_reply_cache_free(struct nfsd_drc_bucket *b, struct svc_cacherep *rp,
struct nfsd_net *nn)
{
spin_lock(&b->cache_lock);
nfsd_reply_cache_free_locked(b, rp, nn);
spin_unlock(&b->cache_lock);
}
nfsd4: make drc_slab global, not per-net I made every global per-network-namespace instead. But perhaps doing that to this slab was a step too far. The kmem_cache_create call in our net init method also seems to be responsible for this lockdep warning: [ 45.163710] Unable to find swap-space signature [ 45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap. This is not supported. [ 46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program [ 51.011723] [ 51.013378] ====================================================== [ 51.013875] WARNING: possible circular locking dependency detected [ 51.014378] 5.2.0-rc2 #1 Not tainted [ 51.014672] ------------------------------------------------------ [ 51.015182] trinity-c2/886 is trying to acquire lock: [ 51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130 [ 51.016190] [ 51.016190] but task is already holding lock: [ 51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 [ 51.017266] [ 51.017266] which lock already depends on the new lock. [ 51.017266] [ 51.017909] [ 51.017909] the existing dependency chain (in reverse order) is: [ 51.018497] [ 51.018497] -> #1 (kn->count#43){++++}: [ 51.018956] __lock_acquire+0x7cf/0x1a20 [ 51.019317] lock_acquire+0x17d/0x390 [ 51.019658] __kernfs_remove+0x892/0xae0 [ 51.020020] kernfs_remove_by_name_ns+0x78/0x110 [ 51.020435] sysfs_remove_link+0x55/0xb0 [ 51.020832] sysfs_slab_add+0xc1/0x3e0 [ 51.021332] __kmem_cache_create+0x155/0x200 [ 51.021720] create_cache+0xf5/0x320 [ 51.022054] kmem_cache_create_usercopy+0x179/0x320 [ 51.022486] kmem_cache_create+0x1a/0x30 [ 51.022867] nfsd_reply_cache_init+0x278/0x560 [ 51.023266] nfsd_init_net+0x20f/0x5e0 [ 51.023623] ops_init+0xcb/0x4b0 [ 51.023928] setup_net+0x2fe/0x670 [ 51.024315] copy_net_ns+0x30a/0x3f0 [ 51.024653] create_new_namespaces+0x3c5/0x820 [ 51.025257] unshare_nsproxy_namespaces+0xd1/0x240 [ 51.025881] ksys_unshare+0x506/0x9c0 [ 51.026381] __x64_sys_unshare+0x3a/0x50 [ 51.026937] do_syscall_64+0x110/0x10b0 [ 51.027509] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.028175] [ 51.028175] -> #0 (slab_mutex){+.+.}: [ 51.028817] validate_chain+0x1c51/0x2cc0 [ 51.029422] __lock_acquire+0x7cf/0x1a20 [ 51.029947] lock_acquire+0x17d/0x390 [ 51.030438] __mutex_lock+0x100/0xfa0 [ 51.030995] mutex_lock_nested+0x27/0x30 [ 51.031516] slab_attr_store+0xa2/0x130 [ 51.032020] sysfs_kf_write+0x11d/0x180 [ 51.032529] kernfs_fop_write+0x32a/0x500 [ 51.033056] do_loop_readv_writev+0x21d/0x310 [ 51.033627] do_iter_write+0x2e5/0x380 [ 51.034148] vfs_writev+0x170/0x310 [ 51.034616] do_pwritev+0x13e/0x160 [ 51.035100] __x64_sys_pwritev+0xa3/0x110 [ 51.035633] do_syscall_64+0x110/0x10b0 [ 51.036200] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.036924] [ 51.036924] other info that might help us debug this: [ 51.036924] [ 51.037876] Possible unsafe locking scenario: [ 51.037876] [ 51.038556] CPU0 CPU1 [ 51.039130] ---- ---- [ 51.039676] lock(kn->count#43); [ 51.040084] lock(slab_mutex); [ 51.040597] lock(kn->count#43); [ 51.041062] lock(slab_mutex); [ 51.041320] [ 51.041320] *** DEADLOCK *** [ 51.041320] [ 51.041793] 3 locks held by trinity-c2/886: [ 51.042128] #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310 [ 51.042739] #1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500 [ 51.043400] #2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 Reported-by: kernel test robot <lkp@intel.com> Fixes: 3ba75830ce17 "drc containerization" Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-06-02 05:44:45 +08:00
int nfsd_drc_slab_create(void)
{
drc_slab = kmem_cache_create("nfsd_drc",
sizeof(struct svc_cacherep), 0, 0, NULL);
return drc_slab ? 0: -ENOMEM;
}
void nfsd_drc_slab_free(void)
{
kmem_cache_destroy(drc_slab);
}
static int nfsd_reply_cache_stats_init(struct nfsd_net *nn)
{
return nfsd_percpu_counters_init(nn->counter, NFSD_NET_COUNTERS_NUM);
}
static void nfsd_reply_cache_stats_destroy(struct nfsd_net *nn)
{
nfsd_percpu_counters_destroy(nn->counter, NFSD_NET_COUNTERS_NUM);
}
int nfsd_reply_cache_init(struct nfsd_net *nn)
{
unsigned int hashsize;
unsigned int i;
NFSD: Error out when register_shrinker() fail If register_shrinker() failed, nfsd will cause a NULL pointer access as, [ 9250.875465] nfsd: last server has exited, flushing export cache [ 9251.427270] BUG: unable to handle kernel NULL pointer dereference at (null) [ 9251.427393] IP: [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.427579] PGD 13e4d067 PUD 13e4c067 PMD 0 [ 9251.427633] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 9251.427706] Modules linked in: ip6t_rpfilter ip6t_REJECT bnep bluetooth xt_conntrack cfg80211 rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw btrfs xfs microcode ppdev serio_raw pcspkr xor libcrc32c raid6_pq e1000 parport_pc parport i2c_piix4 i2c_core nfsd(OE-) auth_rpcgss nfs_acl lockd sunrpc(E) ata_generic pata_acpi [ 9251.428240] CPU: 0 PID: 1557 Comm: rmmod Tainted: G OE 3.16.0-rc2+ #22 [ 9251.428366] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 [ 9251.428496] task: ffff880000849540 ti: ffff8800136f4000 task.ti: ffff8800136f4000 [ 9251.428593] RIP: 0010:[<ffffffff8136fc29>] [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.428696] RSP: 0018:ffff8800136f7ea0 EFLAGS: 00010207 [ 9251.428751] RAX: 0000000000000000 RBX: ffffffffa0116d48 RCX: dead000000200200 [ 9251.428814] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa0116d48 [ 9251.428876] RBP: ffff8800136f7ea0 R08: ffff8800136f4000 R09: 0000000000000001 [ 9251.428939] R10: 8080808080808080 R11: 0000000000000000 R12: ffffffffa011a5a0 [ 9251.429002] R13: 0000000000000800 R14: 0000000000000000 R15: 00000000018ac090 [ 9251.429064] FS: 00007fb9acef0740(0000) GS:ffff88003fa00000(0000) knlGS:0000000000000000 [ 9251.429164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9251.429221] CR2: 0000000000000000 CR3: 0000000031a17000 CR4: 00000000001407f0 [ 9251.429306] Stack: [ 9251.429410] ffff8800136f7eb8 ffffffff8136fcdd ffffffffa0116d20 ffff8800136f7ed0 [ 9251.429511] ffffffff8118a0f2 0000000000000000 ffff8800136f7ee0 ffffffffa00eb765 [ 9251.429610] ffff8800136f7ef0 ffffffffa010e93c ffff8800136f7f78 ffffffff81104ac2 [ 9251.429709] Call Trace: [ 9251.429755] [<ffffffff8136fcdd>] list_del+0xd/0x30 [ 9251.429896] [<ffffffff8118a0f2>] unregister_shrinker+0x22/0x40 [ 9251.430037] [<ffffffffa00eb765>] nfsd_reply_cache_shutdown+0x15/0x90 [nfsd] [ 9251.430106] [<ffffffffa010e93c>] exit_nfsd+0x9/0x6cd [nfsd] [ 9251.430192] [<ffffffff81104ac2>] SyS_delete_module+0x162/0x200 [ 9251.430280] [<ffffffff81013b69>] ? do_notify_resume+0x59/0x90 [ 9251.430395] [<ffffffff816f2369>] system_call_fastpath+0x16/0x1b [ 9251.430457] Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08 [ 9251.430691] RIP [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.430755] RSP <ffff8800136f7ea0> [ 9251.430805] CR2: 0000000000000000 [ 9251.431033] ---[ end trace 080f3050d082b4ea ]--- Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-19 19:48:31 +08:00
int status = 0;
nn->max_drc_entries = nfsd_cache_size_limit();
atomic_set(&nn->num_drc_entries, 0);
hashsize = nfsd_hashsize(nn->max_drc_entries);
nn->maskbits = ilog2(hashsize);
status = nfsd_reply_cache_stats_init(nn);
if (status)
goto out_nomem;
nn->nfsd_reply_cache_shrinker.scan_objects = nfsd_reply_cache_scan;
nn->nfsd_reply_cache_shrinker.count_objects = nfsd_reply_cache_count;
nn->nfsd_reply_cache_shrinker.seeks = 1;
mm: shrinkers: provide shrinkers with names Currently shrinkers are anonymous objects. For debugging purposes they can be identified by count/scan function names, but it's not always useful: e.g. for superblock's shrinkers it's nice to have at least an idea of to which superblock the shrinker belongs. This commit adds names to shrinkers. register_shrinker() and prealloc_shrinker() functions are extended to take a format and arguments to master a name. In some cases it's not possible to determine a good name at the time when a shrinker is allocated. For such cases shrinker_debugfs_rename() is provided. The expected format is: <subsystem>-<shrinker_type>[:<instance>]-<id> For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair. After this change the shrinker debugfs directory looks like: $ cd /sys/kernel/debug/shrinker/ $ ls dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42 mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43 mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44 rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49 sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13 sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36 sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19 sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10 sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9 sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37 sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38 sb-dax-11 sb-proc-45 sb-tmpfs-35 sb-debugfs-7 sb-proc-46 sb-tmpfs-40 [roman.gushchin@linux.dev: fix build warnings] Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:24 +08:00
status = register_shrinker(&nn->nfsd_reply_cache_shrinker,
"nfsd-reply:%s", nn->nfsd_name);
NFSD: Error out when register_shrinker() fail If register_shrinker() failed, nfsd will cause a NULL pointer access as, [ 9250.875465] nfsd: last server has exited, flushing export cache [ 9251.427270] BUG: unable to handle kernel NULL pointer dereference at (null) [ 9251.427393] IP: [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.427579] PGD 13e4d067 PUD 13e4c067 PMD 0 [ 9251.427633] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 9251.427706] Modules linked in: ip6t_rpfilter ip6t_REJECT bnep bluetooth xt_conntrack cfg80211 rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw btrfs xfs microcode ppdev serio_raw pcspkr xor libcrc32c raid6_pq e1000 parport_pc parport i2c_piix4 i2c_core nfsd(OE-) auth_rpcgss nfs_acl lockd sunrpc(E) ata_generic pata_acpi [ 9251.428240] CPU: 0 PID: 1557 Comm: rmmod Tainted: G OE 3.16.0-rc2+ #22 [ 9251.428366] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 [ 9251.428496] task: ffff880000849540 ti: ffff8800136f4000 task.ti: ffff8800136f4000 [ 9251.428593] RIP: 0010:[<ffffffff8136fc29>] [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.428696] RSP: 0018:ffff8800136f7ea0 EFLAGS: 00010207 [ 9251.428751] RAX: 0000000000000000 RBX: ffffffffa0116d48 RCX: dead000000200200 [ 9251.428814] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa0116d48 [ 9251.428876] RBP: ffff8800136f7ea0 R08: ffff8800136f4000 R09: 0000000000000001 [ 9251.428939] R10: 8080808080808080 R11: 0000000000000000 R12: ffffffffa011a5a0 [ 9251.429002] R13: 0000000000000800 R14: 0000000000000000 R15: 00000000018ac090 [ 9251.429064] FS: 00007fb9acef0740(0000) GS:ffff88003fa00000(0000) knlGS:0000000000000000 [ 9251.429164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9251.429221] CR2: 0000000000000000 CR3: 0000000031a17000 CR4: 00000000001407f0 [ 9251.429306] Stack: [ 9251.429410] ffff8800136f7eb8 ffffffff8136fcdd ffffffffa0116d20 ffff8800136f7ed0 [ 9251.429511] ffffffff8118a0f2 0000000000000000 ffff8800136f7ee0 ffffffffa00eb765 [ 9251.429610] ffff8800136f7ef0 ffffffffa010e93c ffff8800136f7f78 ffffffff81104ac2 [ 9251.429709] Call Trace: [ 9251.429755] [<ffffffff8136fcdd>] list_del+0xd/0x30 [ 9251.429896] [<ffffffff8118a0f2>] unregister_shrinker+0x22/0x40 [ 9251.430037] [<ffffffffa00eb765>] nfsd_reply_cache_shutdown+0x15/0x90 [nfsd] [ 9251.430106] [<ffffffffa010e93c>] exit_nfsd+0x9/0x6cd [nfsd] [ 9251.430192] [<ffffffff81104ac2>] SyS_delete_module+0x162/0x200 [ 9251.430280] [<ffffffff81013b69>] ? do_notify_resume+0x59/0x90 [ 9251.430395] [<ffffffff816f2369>] system_call_fastpath+0x16/0x1b [ 9251.430457] Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08 [ 9251.430691] RIP [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.430755] RSP <ffff8800136f7ea0> [ 9251.430805] CR2: 0000000000000000 [ 9251.431033] ---[ end trace 080f3050d082b4ea ]--- Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-19 19:48:31 +08:00
if (status)
goto out_stats_destroy;
NFSD: Error out when register_shrinker() fail If register_shrinker() failed, nfsd will cause a NULL pointer access as, [ 9250.875465] nfsd: last server has exited, flushing export cache [ 9251.427270] BUG: unable to handle kernel NULL pointer dereference at (null) [ 9251.427393] IP: [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.427579] PGD 13e4d067 PUD 13e4c067 PMD 0 [ 9251.427633] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 9251.427706] Modules linked in: ip6t_rpfilter ip6t_REJECT bnep bluetooth xt_conntrack cfg80211 rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw btrfs xfs microcode ppdev serio_raw pcspkr xor libcrc32c raid6_pq e1000 parport_pc parport i2c_piix4 i2c_core nfsd(OE-) auth_rpcgss nfs_acl lockd sunrpc(E) ata_generic pata_acpi [ 9251.428240] CPU: 0 PID: 1557 Comm: rmmod Tainted: G OE 3.16.0-rc2+ #22 [ 9251.428366] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 [ 9251.428496] task: ffff880000849540 ti: ffff8800136f4000 task.ti: ffff8800136f4000 [ 9251.428593] RIP: 0010:[<ffffffff8136fc29>] [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.428696] RSP: 0018:ffff8800136f7ea0 EFLAGS: 00010207 [ 9251.428751] RAX: 0000000000000000 RBX: ffffffffa0116d48 RCX: dead000000200200 [ 9251.428814] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa0116d48 [ 9251.428876] RBP: ffff8800136f7ea0 R08: ffff8800136f4000 R09: 0000000000000001 [ 9251.428939] R10: 8080808080808080 R11: 0000000000000000 R12: ffffffffa011a5a0 [ 9251.429002] R13: 0000000000000800 R14: 0000000000000000 R15: 00000000018ac090 [ 9251.429064] FS: 00007fb9acef0740(0000) GS:ffff88003fa00000(0000) knlGS:0000000000000000 [ 9251.429164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9251.429221] CR2: 0000000000000000 CR3: 0000000031a17000 CR4: 00000000001407f0 [ 9251.429306] Stack: [ 9251.429410] ffff8800136f7eb8 ffffffff8136fcdd ffffffffa0116d20 ffff8800136f7ed0 [ 9251.429511] ffffffff8118a0f2 0000000000000000 ffff8800136f7ee0 ffffffffa00eb765 [ 9251.429610] ffff8800136f7ef0 ffffffffa010e93c ffff8800136f7f78 ffffffff81104ac2 [ 9251.429709] Call Trace: [ 9251.429755] [<ffffffff8136fcdd>] list_del+0xd/0x30 [ 9251.429896] [<ffffffff8118a0f2>] unregister_shrinker+0x22/0x40 [ 9251.430037] [<ffffffffa00eb765>] nfsd_reply_cache_shutdown+0x15/0x90 [nfsd] [ 9251.430106] [<ffffffffa010e93c>] exit_nfsd+0x9/0x6cd [nfsd] [ 9251.430192] [<ffffffff81104ac2>] SyS_delete_module+0x162/0x200 [ 9251.430280] [<ffffffff81013b69>] ? do_notify_resume+0x59/0x90 [ 9251.430395] [<ffffffff816f2369>] system_call_fastpath+0x16/0x1b [ 9251.430457] Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08 [ 9251.430691] RIP [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.430755] RSP <ffff8800136f7ea0> [ 9251.430805] CR2: 0000000000000000 [ 9251.431033] ---[ end trace 080f3050d082b4ea ]--- Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-19 19:48:31 +08:00
nn->drc_hashtbl = kvzalloc(array_size(hashsize,
sizeof(*nn->drc_hashtbl)), GFP_KERNEL);
if (!nn->drc_hashtbl)
goto out_shrinker;
for (i = 0; i < hashsize; i++) {
INIT_LIST_HEAD(&nn->drc_hashtbl[i].lru_head);
spin_lock_init(&nn->drc_hashtbl[i].cache_lock);
}
nn->drc_hashsize = hashsize;
return 0;
out_shrinker:
unregister_shrinker(&nn->nfsd_reply_cache_shrinker);
out_stats_destroy:
nfsd_reply_cache_stats_destroy(nn);
out_nomem:
printk(KERN_ERR "nfsd: failed to allocate reply cache\n");
return -ENOMEM;
}
void nfsd_reply_cache_shutdown(struct nfsd_net *nn)
{
struct svc_cacherep *rp;
unsigned int i;
unregister_shrinker(&nn->nfsd_reply_cache_shrinker);
for (i = 0; i < nn->drc_hashsize; i++) {
struct list_head *head = &nn->drc_hashtbl[i].lru_head;
while (!list_empty(head)) {
rp = list_first_entry(head, struct svc_cacherep, c_lru);
nfsd_reply_cache_free_locked(&nn->drc_hashtbl[i],
rp, nn);
}
}
nfsd_reply_cache_stats_destroy(nn);
kvfree(nn->drc_hashtbl);
nn->drc_hashtbl = NULL;
nn->drc_hashsize = 0;
}
/*
* Move cache entry to end of LRU list, and queue the cleaner to run if it's
* not already scheduled.
*/
static void
lru_put_end(struct nfsd_drc_bucket *b, struct svc_cacherep *rp)
{
rp->c_timestamp = jiffies;
list_move_tail(&rp->c_lru, &b->lru_head);
}
static noinline struct nfsd_drc_bucket *
nfsd_cache_bucket_find(__be32 xid, struct nfsd_net *nn)
{
unsigned int hash = hash_32((__force u32)xid, nn->maskbits);
return &nn->drc_hashtbl[hash];
}
NFSD: Optimize DRC bucket pruning DRC bucket pruning is done by nfsd_cache_lookup(), which is part of every NFSv2 and NFSv3 dispatch (ie, it's done while the client is waiting). I added a trace_printk() in prune_bucket() to see just how long it takes to prune. Here are two ends of the spectrum: prune_bucket: Scanned 1 and freed 0 in 90 ns, 62 entries remaining prune_bucket: Scanned 2 and freed 1 in 716 ns, 63 entries remaining ... prune_bucket: Scanned 75 and freed 74 in 34149 ns, 1 entries remaining Pruning latency is noticeable on fast transports with fast storage. By noticeable, I mean that the latency measured here in the worst case is the same order of magnitude as the round trip time for cached server operations. We could do something like moving expired entries to an expired list and then free them later instead of freeing them right in prune_bucket(). But simply limiting the number of entries that can be pruned by a lookup is simple and retains more entries in the cache, making the DRC somewhat more effective. Comparison with a 70/30 fio 8KB 12 thread direct I/O test: Before: write: IOPS=61.6k, BW=481MiB/s (505MB/s)(14.1GiB/30001msec); 0 zone resets WRITE: 1848726 ops (30%) avg bytes sent per op: 8340 avg bytes received per op: 136 backlog wait: 0.635158 RTT: 0.128525 total execute time: 0.827242 (milliseconds) After: write: IOPS=63.0k, BW=492MiB/s (516MB/s)(14.4GiB/30001msec); 0 zone resets WRITE: 1891144 ops (30%) avg bytes sent per op: 8340 avg bytes received per op: 136 backlog wait: 0.616114 RTT: 0.126842 total execute time: 0.805348 (milliseconds) Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2021-09-21 03:25:21 +08:00
static long prune_bucket(struct nfsd_drc_bucket *b, struct nfsd_net *nn,
unsigned int max)
{
struct svc_cacherep *rp, *tmp;
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:09 +08:00
long freed = 0;
list_for_each_entry_safe(rp, tmp, &b->lru_head, c_lru) {
/*
* Don't free entries attached to calls that are still
* in-progress, but do keep scanning the list.
*/
if (rp->c_state == RC_INPROG)
continue;
if (atomic_read(&nn->num_drc_entries) <= nn->max_drc_entries &&
time_before(jiffies, rp->c_timestamp + RC_EXPIRE))
break;
nfsd_reply_cache_free_locked(b, rp, nn);
NFSD: Optimize DRC bucket pruning DRC bucket pruning is done by nfsd_cache_lookup(), which is part of every NFSv2 and NFSv3 dispatch (ie, it's done while the client is waiting). I added a trace_printk() in prune_bucket() to see just how long it takes to prune. Here are two ends of the spectrum: prune_bucket: Scanned 1 and freed 0 in 90 ns, 62 entries remaining prune_bucket: Scanned 2 and freed 1 in 716 ns, 63 entries remaining ... prune_bucket: Scanned 75 and freed 74 in 34149 ns, 1 entries remaining Pruning latency is noticeable on fast transports with fast storage. By noticeable, I mean that the latency measured here in the worst case is the same order of magnitude as the round trip time for cached server operations. We could do something like moving expired entries to an expired list and then free them later instead of freeing them right in prune_bucket(). But simply limiting the number of entries that can be pruned by a lookup is simple and retains more entries in the cache, making the DRC somewhat more effective. Comparison with a 70/30 fio 8KB 12 thread direct I/O test: Before: write: IOPS=61.6k, BW=481MiB/s (505MB/s)(14.1GiB/30001msec); 0 zone resets WRITE: 1848726 ops (30%) avg bytes sent per op: 8340 avg bytes received per op: 136 backlog wait: 0.635158 RTT: 0.128525 total execute time: 0.827242 (milliseconds) After: write: IOPS=63.0k, BW=492MiB/s (516MB/s)(14.4GiB/30001msec); 0 zone resets WRITE: 1891144 ops (30%) avg bytes sent per op: 8340 avg bytes received per op: 136 backlog wait: 0.616114 RTT: 0.126842 total execute time: 0.805348 (milliseconds) Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2021-09-21 03:25:21 +08:00
if (max && freed++ > max)
break;
}
return freed;
}
NFSD: Optimize DRC bucket pruning DRC bucket pruning is done by nfsd_cache_lookup(), which is part of every NFSv2 and NFSv3 dispatch (ie, it's done while the client is waiting). I added a trace_printk() in prune_bucket() to see just how long it takes to prune. Here are two ends of the spectrum: prune_bucket: Scanned 1 and freed 0 in 90 ns, 62 entries remaining prune_bucket: Scanned 2 and freed 1 in 716 ns, 63 entries remaining ... prune_bucket: Scanned 75 and freed 74 in 34149 ns, 1 entries remaining Pruning latency is noticeable on fast transports with fast storage. By noticeable, I mean that the latency measured here in the worst case is the same order of magnitude as the round trip time for cached server operations. We could do something like moving expired entries to an expired list and then free them later instead of freeing them right in prune_bucket(). But simply limiting the number of entries that can be pruned by a lookup is simple and retains more entries in the cache, making the DRC somewhat more effective. Comparison with a 70/30 fio 8KB 12 thread direct I/O test: Before: write: IOPS=61.6k, BW=481MiB/s (505MB/s)(14.1GiB/30001msec); 0 zone resets WRITE: 1848726 ops (30%) avg bytes sent per op: 8340 avg bytes received per op: 136 backlog wait: 0.635158 RTT: 0.128525 total execute time: 0.827242 (milliseconds) After: write: IOPS=63.0k, BW=492MiB/s (516MB/s)(14.4GiB/30001msec); 0 zone resets WRITE: 1891144 ops (30%) avg bytes sent per op: 8340 avg bytes received per op: 136 backlog wait: 0.616114 RTT: 0.126842 total execute time: 0.805348 (milliseconds) Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2021-09-21 03:25:21 +08:00
static long nfsd_prune_bucket(struct nfsd_drc_bucket *b, struct nfsd_net *nn)
{
return prune_bucket(b, nn, 3);
}
/*
* Walk the LRU list and prune off entries that are older than RC_EXPIRE.
* Also prune the oldest ones when the total exceeds the max number of entries.
*/
static long
prune_cache_entries(struct nfsd_net *nn)
{
unsigned int i;
long freed = 0;
for (i = 0; i < nn->drc_hashsize; i++) {
struct nfsd_drc_bucket *b = &nn->drc_hashtbl[i];
if (list_empty(&b->lru_head))
continue;
spin_lock(&b->cache_lock);
NFSD: Optimize DRC bucket pruning DRC bucket pruning is done by nfsd_cache_lookup(), which is part of every NFSv2 and NFSv3 dispatch (ie, it's done while the client is waiting). I added a trace_printk() in prune_bucket() to see just how long it takes to prune. Here are two ends of the spectrum: prune_bucket: Scanned 1 and freed 0 in 90 ns, 62 entries remaining prune_bucket: Scanned 2 and freed 1 in 716 ns, 63 entries remaining ... prune_bucket: Scanned 75 and freed 74 in 34149 ns, 1 entries remaining Pruning latency is noticeable on fast transports with fast storage. By noticeable, I mean that the latency measured here in the worst case is the same order of magnitude as the round trip time for cached server operations. We could do something like moving expired entries to an expired list and then free them later instead of freeing them right in prune_bucket(). But simply limiting the number of entries that can be pruned by a lookup is simple and retains more entries in the cache, making the DRC somewhat more effective. Comparison with a 70/30 fio 8KB 12 thread direct I/O test: Before: write: IOPS=61.6k, BW=481MiB/s (505MB/s)(14.1GiB/30001msec); 0 zone resets WRITE: 1848726 ops (30%) avg bytes sent per op: 8340 avg bytes received per op: 136 backlog wait: 0.635158 RTT: 0.128525 total execute time: 0.827242 (milliseconds) After: write: IOPS=63.0k, BW=492MiB/s (516MB/s)(14.4GiB/30001msec); 0 zone resets WRITE: 1891144 ops (30%) avg bytes sent per op: 8340 avg bytes received per op: 136 backlog wait: 0.616114 RTT: 0.126842 total execute time: 0.805348 (milliseconds) Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2021-09-21 03:25:21 +08:00
freed += prune_bucket(b, nn, 0);
spin_unlock(&b->cache_lock);
}
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:09 +08:00
return freed;
}
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:09 +08:00
static unsigned long
nfsd_reply_cache_count(struct shrinker *shrink, struct shrink_control *sc)
{
struct nfsd_net *nn = container_of(shrink,
struct nfsd_net, nfsd_reply_cache_shrinker);
return atomic_read(&nn->num_drc_entries);
}
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:09 +08:00
static unsigned long
nfsd_reply_cache_scan(struct shrinker *shrink, struct shrink_control *sc)
{
struct nfsd_net *nn = container_of(shrink,
struct nfsd_net, nfsd_reply_cache_shrinker);
return prune_cache_entries(nn);
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:09 +08:00
}
/*
* Walk an xdr_buf and get a CRC for at most the first RC_CSUMLEN bytes
*/
static __wsum
nfsd_cache_csum(struct svc_rqst *rqstp)
{
int idx;
unsigned int base;
__wsum csum;
struct xdr_buf *buf = &rqstp->rq_arg;
const unsigned char *p = buf->head[0].iov_base;
size_t csum_len = min_t(size_t, buf->head[0].iov_len + buf->page_len,
RC_CSUMLEN);
size_t len = min(buf->head[0].iov_len, csum_len);
/* rq_arg.head first */
csum = csum_partial(p, len, 0);
csum_len -= len;
/* Continue into page array */
idx = buf->page_base / PAGE_SIZE;
base = buf->page_base & ~PAGE_MASK;
while (csum_len) {
p = page_address(buf->pages[idx]) + base;
len = min_t(size_t, PAGE_SIZE - base, csum_len);
csum = csum_partial(p, len, csum);
csum_len -= len;
base = 0;
++idx;
}
return csum;
}
static int
nfsd_cache_key_cmp(const struct svc_cacherep *key,
const struct svc_cacherep *rp, struct nfsd_net *nn)
{
if (key->c_key.k_xid == rp->c_key.k_xid &&
key->c_key.k_csum != rp->c_key.k_csum) {
nfsd_stats_payload_misses_inc(nn);
trace_nfsd_drc_mismatch(nn, key, rp);
}
return memcmp(&key->c_key, &rp->c_key, sizeof(key->c_key));
}
/*
* Search the request hash for an entry that matches the given rqstp.
* Must be called with cache_lock held. Returns the found entry or
* inserts an empty key on failure.
*/
static struct svc_cacherep *
nfsd_cache_insert(struct nfsd_drc_bucket *b, struct svc_cacherep *key,
struct nfsd_net *nn)
{
struct svc_cacherep *rp, *ret = key;
struct rb_node **p = &b->rb_head.rb_node,
*parent = NULL;
unsigned int entries = 0;
int cmp;
while (*p != NULL) {
++entries;
parent = *p;
rp = rb_entry(parent, struct svc_cacherep, c_node);
cmp = nfsd_cache_key_cmp(key, rp, nn);
if (cmp < 0)
p = &parent->rb_left;
else if (cmp > 0)
p = &parent->rb_right;
else {
ret = rp;
goto out;
}
}
rb_link_node(&key->c_node, parent, p);
rb_insert_color(&key->c_node, &b->rb_head);
out:
/* tally hash chain length stats */
if (entries > nn->longest_chain) {
nn->longest_chain = entries;
nn->longest_chain_cachesize = atomic_read(&nn->num_drc_entries);
} else if (entries == nn->longest_chain) {
/* prefer to keep the smallest cachesize possible here */
nn->longest_chain_cachesize = min_t(unsigned int,
nn->longest_chain_cachesize,
atomic_read(&nn->num_drc_entries));
}
lru_put_end(b, ret);
return ret;
}
/**
* nfsd_cache_lookup - Find an entry in the duplicate reply cache
* @rqstp: Incoming Call to find
*
* Try to find an entry matching the current call in the cache. When none
* is found, we try to grab the oldest expired entry off the LRU list. If
* a suitable one isn't there, then drop the cache_lock and allocate a
* new one, then search again in case one got inserted while this thread
* didn't hold the lock.
*
* Return values:
* %RC_DOIT: Process the request normally
* %RC_REPLY: Reply from cache
* %RC_DROPIT: Do not process the request further
*/
int nfsd_cache_lookup(struct svc_rqst *rqstp)
{
struct nfsd_net *nn;
struct svc_cacherep *rp, *found;
__wsum csum;
struct nfsd_drc_bucket *b;
int type = rqstp->rq_cachetype;
int rtn = RC_DOIT;
rqstp->rq_cacherep = NULL;
if (type == RC_NOCACHE) {
nfsd_stats_rc_nocache_inc();
goto out;
}
csum = nfsd_cache_csum(rqstp);
/*
* Since the common case is a cache miss followed by an insert,
* preallocate an entry.
*/
nn = net_generic(SVC_NET(rqstp), nfsd_net_id);
rp = nfsd_reply_cache_alloc(rqstp, csum, nn);
if (!rp)
goto out;
b = nfsd_cache_bucket_find(rqstp->rq_xid, nn);
spin_lock(&b->cache_lock);
found = nfsd_cache_insert(b, rp, nn);
if (found != rp)
goto found_entry;
nfsd_stats_rc_misses_inc();
rqstp->rq_cacherep = rp;
rp->c_state = RC_INPROG;
atomic_inc(&nn->num_drc_entries);
nfsd_stats_drc_mem_usage_add(nn, sizeof(*rp));
NFSD: Optimize DRC bucket pruning DRC bucket pruning is done by nfsd_cache_lookup(), which is part of every NFSv2 and NFSv3 dispatch (ie, it's done while the client is waiting). I added a trace_printk() in prune_bucket() to see just how long it takes to prune. Here are two ends of the spectrum: prune_bucket: Scanned 1 and freed 0 in 90 ns, 62 entries remaining prune_bucket: Scanned 2 and freed 1 in 716 ns, 63 entries remaining ... prune_bucket: Scanned 75 and freed 74 in 34149 ns, 1 entries remaining Pruning latency is noticeable on fast transports with fast storage. By noticeable, I mean that the latency measured here in the worst case is the same order of magnitude as the round trip time for cached server operations. We could do something like moving expired entries to an expired list and then free them later instead of freeing them right in prune_bucket(). But simply limiting the number of entries that can be pruned by a lookup is simple and retains more entries in the cache, making the DRC somewhat more effective. Comparison with a 70/30 fio 8KB 12 thread direct I/O test: Before: write: IOPS=61.6k, BW=481MiB/s (505MB/s)(14.1GiB/30001msec); 0 zone resets WRITE: 1848726 ops (30%) avg bytes sent per op: 8340 avg bytes received per op: 136 backlog wait: 0.635158 RTT: 0.128525 total execute time: 0.827242 (milliseconds) After: write: IOPS=63.0k, BW=492MiB/s (516MB/s)(14.4GiB/30001msec); 0 zone resets WRITE: 1891144 ops (30%) avg bytes sent per op: 8340 avg bytes received per op: 136 backlog wait: 0.616114 RTT: 0.126842 total execute time: 0.805348 (milliseconds) Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2021-09-21 03:25:21 +08:00
nfsd_prune_bucket(b, nn);
out_unlock:
spin_unlock(&b->cache_lock);
out:
return rtn;
found_entry:
/* We found a matching entry which is either in progress or done. */
nfsd_reply_cache_free_locked(NULL, rp, nn);
nfsd_stats_rc_hits_inc();
rtn = RC_DROPIT;
rp = found;
/* Request being processed */
if (rp->c_state == RC_INPROG)
goto out_trace;
/* From the hall of fame of impractical attacks:
* Is this a user who tries to snoop on the cache? */
rtn = RC_DOIT;
if (!test_bit(RQ_SECURE, &rqstp->rq_flags) && rp->c_secure)
goto out_trace;
/* Compose RPC reply header */
switch (rp->c_type) {
case RC_NOCACHE:
break;
case RC_REPLSTAT:
svc_putu32(&rqstp->rq_res.head[0], rp->c_replstat);
rtn = RC_REPLY;
break;
case RC_REPLBUFF:
if (!nfsd_cache_append(rqstp, &rp->c_replvec))
goto out_unlock; /* should not happen */
rtn = RC_REPLY;
break;
default:
WARN_ONCE(1, "nfsd: bad repcache type %d\n", rp->c_type);
}
out_trace:
trace_nfsd_drc_found(nn, rqstp, rtn);
goto out_unlock;
}
/**
* nfsd_cache_update - Update an entry in the duplicate reply cache.
* @rqstp: svc_rqst with a finished Reply
* @cachetype: which cache to update
* @statp: Reply's status code
*
* This is called from nfsd_dispatch when the procedure has been
* executed and the complete reply is in rqstp->rq_res.
*
* We're copying around data here rather than swapping buffers because
* the toplevel loop requires max-sized buffers, which would be a waste
* of memory for a cache with a max reply size of 100 bytes (diropokres).
*
* If we should start to use different types of cache entries tailored
* specifically for attrstat and fh's, we may save even more space.
*
* Also note that a cachetype of RC_NOCACHE can legally be passed when
* nfsd failed to encode a reply that otherwise would have been cached.
* In this case, nfsd_cache_update is called with statp == NULL.
*/
void nfsd_cache_update(struct svc_rqst *rqstp, int cachetype, __be32 *statp)
{
struct nfsd_net *nn = net_generic(SVC_NET(rqstp), nfsd_net_id);
struct svc_cacherep *rp = rqstp->rq_cacherep;
struct kvec *resv = &rqstp->rq_res.head[0], *cachv;
struct nfsd_drc_bucket *b;
int len;
size_t bufsize = 0;
if (!rp)
return;
b = nfsd_cache_bucket_find(rp->c_key.k_xid, nn);
len = resv->iov_len - ((char*)statp - (char*)resv->iov_base);
len >>= 2;
/* Don't cache excessive amounts of data and XDR failures */
if (!statp || len > (256 >> 2)) {
nfsd_reply_cache_free(b, rp, nn);
return;
}
switch (cachetype) {
case RC_REPLSTAT:
if (len != 1)
printk("nfsd: RC_REPLSTAT/reply len %d!\n",len);
rp->c_replstat = *statp;
break;
case RC_REPLBUFF:
cachv = &rp->c_replvec;
bufsize = len << 2;
cachv->iov_base = kmalloc(bufsize, GFP_KERNEL);
if (!cachv->iov_base) {
nfsd_reply_cache_free(b, rp, nn);
return;
}
cachv->iov_len = bufsize;
memcpy(cachv->iov_base, statp, bufsize);
break;
case RC_NOCACHE:
nfsd_reply_cache_free(b, rp, nn);
return;
}
spin_lock(&b->cache_lock);
nfsd_stats_drc_mem_usage_add(nn, bufsize);
lru_put_end(b, rp);
rp->c_secure = test_bit(RQ_SECURE, &rqstp->rq_flags);
rp->c_type = cachetype;
rp->c_state = RC_DONE;
spin_unlock(&b->cache_lock);
return;
}
/*
* Copy cached reply to current reply buffer. Should always fit.
* FIXME as reply is in a page, we should just attach the page, and
* keep a refcount....
*/
static int
nfsd_cache_append(struct svc_rqst *rqstp, struct kvec *data)
{
struct kvec *vec = &rqstp->rq_res.head[0];
if (vec->iov_len + data->iov_len > PAGE_SIZE) {
printk(KERN_WARNING "nfsd: cached reply too large (%zd).\n",
data->iov_len);
return 0;
}
memcpy((char*)vec->iov_base + vec->iov_len, data->iov_base, data->iov_len);
vec->iov_len += data->iov_len;
return 1;
}
/*
* Note that fields may be added, removed or reordered in the future. Programs
* scraping this file for info should test the labels to ensure they're
* getting the correct field.
*/
int nfsd_reply_cache_stats_show(struct seq_file *m, void *v)
{
struct nfsd_net *nn = net_generic(file_inode(m->file)->i_sb->s_fs_info,
nfsd_net_id);
seq_printf(m, "max entries: %u\n", nn->max_drc_entries);
seq_printf(m, "num entries: %u\n",
atomic_read(&nn->num_drc_entries));
seq_printf(m, "hash buckets: %u\n", 1 << nn->maskbits);
seq_printf(m, "mem usage: %lld\n",
percpu_counter_sum_positive(&nn->counter[NFSD_NET_DRC_MEM_USAGE]));
seq_printf(m, "cache hits: %lld\n",
percpu_counter_sum_positive(&nfsdstats.counter[NFSD_STATS_RC_HITS]));
seq_printf(m, "cache misses: %lld\n",
percpu_counter_sum_positive(&nfsdstats.counter[NFSD_STATS_RC_MISSES]));
seq_printf(m, "not cached: %lld\n",
percpu_counter_sum_positive(&nfsdstats.counter[NFSD_STATS_RC_NOCACHE]));
seq_printf(m, "payload misses: %lld\n",
percpu_counter_sum_positive(&nn->counter[NFSD_NET_PAYLOAD_MISSES]));
seq_printf(m, "longest chain len: %u\n", nn->longest_chain);
seq_printf(m, "cachesize at longest: %u\n", nn->longest_chain_cachesize);
return 0;
}