linux/drivers/media/i2c/imx412.c

1308 lines
30 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Sony imx412 Camera Sensor Driver
*
* Copyright (C) 2021 Intel Corporation
*/
#include <asm/unaligned.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>
/* Streaming Mode */
#define IMX412_REG_MODE_SELECT 0x0100
#define IMX412_MODE_STANDBY 0x00
#define IMX412_MODE_STREAMING 0x01
/* Lines per frame */
#define IMX412_REG_LPFR 0x0340
/* Chip ID */
#define IMX412_REG_ID 0x0016
#define IMX412_ID 0x577
/* Exposure control */
#define IMX412_REG_EXPOSURE_CIT 0x0202
#define IMX412_EXPOSURE_MIN 8
#define IMX412_EXPOSURE_OFFSET 22
#define IMX412_EXPOSURE_STEP 1
#define IMX412_EXPOSURE_DEFAULT 0x0648
/* Analog gain control */
#define IMX412_REG_AGAIN 0x0204
#define IMX412_AGAIN_MIN 0
#define IMX412_AGAIN_MAX 978
#define IMX412_AGAIN_STEP 1
#define IMX412_AGAIN_DEFAULT 0
/* Group hold register */
#define IMX412_REG_HOLD 0x0104
/* Input clock rate */
#define IMX412_INCLK_RATE 24000000
/* CSI2 HW configuration */
#define IMX412_LINK_FREQ 600000000
#define IMX412_NUM_DATA_LANES 4
#define IMX412_REG_MIN 0x00
#define IMX412_REG_MAX 0xffff
/**
* struct imx412_reg - imx412 sensor register
* @address: Register address
* @val: Register value
*/
struct imx412_reg {
u16 address;
u8 val;
};
/**
* struct imx412_reg_list - imx412 sensor register list
* @num_of_regs: Number of registers in the list
* @regs: Pointer to register list
*/
struct imx412_reg_list {
u32 num_of_regs;
const struct imx412_reg *regs;
};
/**
* struct imx412_mode - imx412 sensor mode structure
* @width: Frame width
* @height: Frame height
* @code: Format code
* @hblank: Horizontal blanking in lines
* @vblank: Vertical blanking in lines
* @vblank_min: Minimum vertical blanking in lines
* @vblank_max: Maximum vertical blanking in lines
* @pclk: Sensor pixel clock
* @link_freq_idx: Link frequency index
* @reg_list: Register list for sensor mode
*/
struct imx412_mode {
u32 width;
u32 height;
u32 code;
u32 hblank;
u32 vblank;
u32 vblank_min;
u32 vblank_max;
u64 pclk;
u32 link_freq_idx;
struct imx412_reg_list reg_list;
};
static const char * const imx412_supply_names[] = {
"dovdd", /* Digital I/O power */
"avdd", /* Analog power */
"dvdd", /* Digital core power */
};
/**
* struct imx412 - imx412 sensor device structure
* @dev: Pointer to generic device
* @client: Pointer to i2c client
* @sd: V4L2 sub-device
* @pad: Media pad. Only one pad supported
* @reset_gpio: Sensor reset gpio
* @inclk: Sensor input clock
* @supplies: Regulator supplies
* @ctrl_handler: V4L2 control handler
* @link_freq_ctrl: Pointer to link frequency control
* @pclk_ctrl: Pointer to pixel clock control
* @hblank_ctrl: Pointer to horizontal blanking control
* @vblank_ctrl: Pointer to vertical blanking control
* @exp_ctrl: Pointer to exposure control
* @again_ctrl: Pointer to analog gain control
* @vblank: Vertical blanking in lines
* @cur_mode: Pointer to current selected sensor mode
* @mutex: Mutex for serializing sensor controls
* @streaming: Flag indicating streaming state
*/
struct imx412 {
struct device *dev;
struct i2c_client *client;
struct v4l2_subdev sd;
struct media_pad pad;
struct gpio_desc *reset_gpio;
struct clk *inclk;
struct regulator_bulk_data supplies[ARRAY_SIZE(imx412_supply_names)];
struct v4l2_ctrl_handler ctrl_handler;
struct v4l2_ctrl *link_freq_ctrl;
struct v4l2_ctrl *pclk_ctrl;
struct v4l2_ctrl *hblank_ctrl;
struct v4l2_ctrl *vblank_ctrl;
struct {
struct v4l2_ctrl *exp_ctrl;
struct v4l2_ctrl *again_ctrl;
};
u32 vblank;
const struct imx412_mode *cur_mode;
struct mutex mutex;
bool streaming;
};
static const s64 link_freq[] = {
IMX412_LINK_FREQ,
};
/* Sensor mode registers */
static const struct imx412_reg mode_4056x3040_regs[] = {
{0x0136, 0x18},
{0x0137, 0x00},
{0x3c7e, 0x08},
{0x3c7f, 0x02},
{0x38a8, 0x1f},
{0x38a9, 0xff},
{0x38aa, 0x1f},
{0x38ab, 0xff},
{0x55d4, 0x00},
{0x55d5, 0x00},
{0x55d6, 0x07},
{0x55d7, 0xff},
{0x55e8, 0x07},
{0x55e9, 0xff},
{0x55ea, 0x00},
{0x55eb, 0x00},
{0x575c, 0x07},
{0x575d, 0xff},
{0x575e, 0x00},
{0x575f, 0x00},
{0x5764, 0x00},
{0x5765, 0x00},
{0x5766, 0x07},
{0x5767, 0xff},
{0x5974, 0x04},
{0x5975, 0x01},
{0x5f10, 0x09},
{0x5f11, 0x92},
{0x5f12, 0x32},
{0x5f13, 0x72},
{0x5f14, 0x16},
{0x5f15, 0xba},
{0x5f17, 0x13},
{0x5f18, 0x24},
{0x5f19, 0x60},
{0x5f1a, 0xe3},
{0x5f1b, 0xad},
{0x5f1c, 0x74},
{0x5f2d, 0x25},
{0x5f5c, 0xd0},
{0x6a22, 0x00},
{0x6a23, 0x1d},
{0x7ba8, 0x00},
{0x7ba9, 0x00},
{0x886b, 0x00},
{0x9002, 0x0a},
{0x9004, 0x1a},
{0x9214, 0x93},
{0x9215, 0x69},
{0x9216, 0x93},
{0x9217, 0x6b},
{0x9218, 0x93},
{0x9219, 0x6d},
{0x921a, 0x57},
{0x921b, 0x58},
{0x921c, 0x57},
{0x921d, 0x59},
{0x921e, 0x57},
{0x921f, 0x5a},
{0x9220, 0x57},
{0x9221, 0x5b},
{0x9222, 0x93},
{0x9223, 0x02},
{0x9224, 0x93},
{0x9225, 0x03},
{0x9226, 0x93},
{0x9227, 0x04},
{0x9228, 0x93},
{0x9229, 0x05},
{0x922a, 0x98},
{0x922b, 0x21},
{0x922c, 0xb2},
{0x922d, 0xdb},
{0x922e, 0xb2},
{0x922f, 0xdc},
{0x9230, 0xb2},
{0x9231, 0xdd},
{0x9232, 0xe2},
{0x9233, 0xe1},
{0x9234, 0xb2},
{0x9235, 0xe2},
{0x9236, 0xb2},
{0x9237, 0xe3},
{0x9238, 0xb7},
{0x9239, 0xb9},
{0x923a, 0xb7},
{0x923b, 0xbb},
{0x923c, 0xb7},
{0x923d, 0xbc},
{0x923e, 0xb7},
{0x923f, 0xc5},
{0x9240, 0xb7},
{0x9241, 0xc7},
{0x9242, 0xb7},
{0x9243, 0xc9},
{0x9244, 0x98},
{0x9245, 0x56},
{0x9246, 0x98},
{0x9247, 0x55},
{0x9380, 0x00},
{0x9381, 0x62},
{0x9382, 0x00},
{0x9383, 0x56},
{0x9384, 0x00},
{0x9385, 0x52},
{0x9388, 0x00},
{0x9389, 0x55},
{0x938a, 0x00},
{0x938b, 0x55},
{0x938c, 0x00},
{0x938d, 0x41},
{0x5078, 0x01},
{0x0112, 0x0a},
{0x0113, 0x0a},
{0x0114, 0x03},
{0x0342, 0x11},
{0x0343, 0xa0},
{0x0340, 0x0d},
{0x0341, 0xda},
{0x3210, 0x00},
{0x0344, 0x00},
{0x0345, 0x00},
{0x0346, 0x00},
{0x0347, 0x00},
{0x0348, 0x0f},
{0x0349, 0xd7},
{0x034a, 0x0b},
{0x034b, 0xdf},
{0x00e3, 0x00},
{0x00e4, 0x00},
{0x00e5, 0x01},
{0x00fc, 0x0a},
{0x00fd, 0x0a},
{0x00fe, 0x0a},
{0x00ff, 0x0a},
{0xe013, 0x00},
{0x0220, 0x00},
{0x0221, 0x11},
{0x0381, 0x01},
{0x0383, 0x01},
{0x0385, 0x01},
{0x0387, 0x01},
{0x0900, 0x00},
{0x0901, 0x11},
{0x0902, 0x00},
{0x3140, 0x02},
{0x3241, 0x11},
{0x3250, 0x03},
{0x3e10, 0x00},
{0x3e11, 0x00},
{0x3f0d, 0x00},
{0x3f42, 0x00},
{0x3f43, 0x00},
{0x0401, 0x00},
{0x0404, 0x00},
{0x0405, 0x10},
{0x0408, 0x00},
{0x0409, 0x00},
{0x040a, 0x00},
{0x040b, 0x00},
{0x040c, 0x0f},
{0x040d, 0xd8},
{0x040e, 0x0b},
{0x040f, 0xe0},
{0x034c, 0x0f},
{0x034d, 0xd8},
{0x034e, 0x0b},
{0x034f, 0xe0},
{0x0301, 0x05},
{0x0303, 0x02},
{0x0305, 0x04},
{0x0306, 0x00},
{0x0307, 0xc8},
{0x0309, 0x0a},
{0x030b, 0x01},
{0x030d, 0x02},
{0x030e, 0x01},
{0x030f, 0x5e},
{0x0310, 0x00},
{0x0820, 0x12},
{0x0821, 0xc0},
{0x0822, 0x00},
{0x0823, 0x00},
{0x3e20, 0x01},
{0x3e37, 0x00},
{0x3f50, 0x00},
{0x3f56, 0x00},
{0x3f57, 0xe2},
{0x3c0a, 0x5a},
{0x3c0b, 0x55},
{0x3c0c, 0x28},
{0x3c0d, 0x07},
{0x3c0e, 0xff},
{0x3c0f, 0x00},
{0x3c10, 0x00},
{0x3c11, 0x02},
{0x3c12, 0x00},
{0x3c13, 0x03},
{0x3c14, 0x00},
{0x3c15, 0x00},
{0x3c16, 0x0c},
{0x3c17, 0x0c},
{0x3c18, 0x0c},
{0x3c19, 0x0a},
{0x3c1a, 0x0a},
{0x3c1b, 0x0a},
{0x3c1c, 0x00},
{0x3c1d, 0x00},
{0x3c1e, 0x00},
{0x3c1f, 0x00},
{0x3c20, 0x00},
{0x3c21, 0x00},
{0x3c22, 0x3f},
{0x3c23, 0x0a},
{0x3e35, 0x01},
{0x3f4a, 0x03},
{0x3f4b, 0xbf},
{0x3f26, 0x00},
{0x0202, 0x0d},
{0x0203, 0xc4},
{0x0204, 0x00},
{0x0205, 0x00},
{0x020e, 0x01},
{0x020f, 0x00},
{0x0210, 0x01},
{0x0211, 0x00},
{0x0212, 0x01},
{0x0213, 0x00},
{0x0214, 0x01},
{0x0215, 0x00},
{0xbcf1, 0x00},
};
/* Supported sensor mode configurations */
static const struct imx412_mode supported_mode = {
.width = 4056,
.height = 3040,
.hblank = 456,
.vblank = 506,
.vblank_min = 506,
.vblank_max = 32420,
.pclk = 480000000,
.link_freq_idx = 0,
.code = MEDIA_BUS_FMT_SRGGB10_1X10,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_4056x3040_regs),
.regs = mode_4056x3040_regs,
},
};
/**
* to_imx412() - imx412 V4L2 sub-device to imx412 device.
* @subdev: pointer to imx412 V4L2 sub-device
*
* Return: pointer to imx412 device
*/
static inline struct imx412 *to_imx412(struct v4l2_subdev *subdev)
{
return container_of(subdev, struct imx412, sd);
}
/**
* imx412_read_reg() - Read registers.
* @imx412: pointer to imx412 device
* @reg: register address
* @len: length of bytes to read. Max supported bytes is 4
* @val: pointer to register value to be filled.
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_read_reg(struct imx412 *imx412, u16 reg, u32 len, u32 *val)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd);
struct i2c_msg msgs[2] = {0};
u8 addr_buf[2] = {0};
u8 data_buf[4] = {0};
int ret;
if (WARN_ON(len > 4))
return -EINVAL;
put_unaligned_be16(reg, addr_buf);
/* Write register address */
msgs[0].addr = client->addr;
msgs[0].flags = 0;
msgs[0].len = ARRAY_SIZE(addr_buf);
msgs[0].buf = addr_buf;
/* Read data from register */
msgs[1].addr = client->addr;
msgs[1].flags = I2C_M_RD;
msgs[1].len = len;
msgs[1].buf = &data_buf[4 - len];
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
if (ret != ARRAY_SIZE(msgs))
return -EIO;
*val = get_unaligned_be32(data_buf);
return 0;
}
/**
* imx412_write_reg() - Write register
* @imx412: pointer to imx412 device
* @reg: register address
* @len: length of bytes. Max supported bytes is 4
* @val: register value
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_write_reg(struct imx412 *imx412, u16 reg, u32 len, u32 val)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd);
u8 buf[6] = {0};
if (WARN_ON(len > 4))
return -EINVAL;
put_unaligned_be16(reg, buf);
put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
if (i2c_master_send(client, buf, len + 2) != len + 2)
return -EIO;
return 0;
}
/**
* imx412_write_regs() - Write a list of registers
* @imx412: pointer to imx412 device
* @regs: list of registers to be written
* @len: length of registers array
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_write_regs(struct imx412 *imx412,
const struct imx412_reg *regs, u32 len)
{
unsigned int i;
int ret;
for (i = 0; i < len; i++) {
ret = imx412_write_reg(imx412, regs[i].address, 1, regs[i].val);
if (ret)
return ret;
}
return 0;
}
/**
* imx412_update_controls() - Update control ranges based on streaming mode
* @imx412: pointer to imx412 device
* @mode: pointer to imx412_mode sensor mode
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_update_controls(struct imx412 *imx412,
const struct imx412_mode *mode)
{
int ret;
ret = __v4l2_ctrl_s_ctrl(imx412->link_freq_ctrl, mode->link_freq_idx);
if (ret)
return ret;
ret = __v4l2_ctrl_s_ctrl(imx412->hblank_ctrl, mode->hblank);
if (ret)
return ret;
return __v4l2_ctrl_modify_range(imx412->vblank_ctrl, mode->vblank_min,
mode->vblank_max, 1, mode->vblank);
}
/**
* imx412_update_exp_gain() - Set updated exposure and gain
* @imx412: pointer to imx412 device
* @exposure: updated exposure value
* @gain: updated analog gain value
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_update_exp_gain(struct imx412 *imx412, u32 exposure, u32 gain)
{
u32 lpfr, shutter;
int ret;
lpfr = imx412->vblank + imx412->cur_mode->height;
shutter = lpfr - exposure;
dev_dbg(imx412->dev, "Set exp %u, analog gain %u, shutter %u, lpfr %u",
exposure, gain, shutter, lpfr);
ret = imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 1);
if (ret)
return ret;
ret = imx412_write_reg(imx412, IMX412_REG_LPFR, 2, lpfr);
if (ret)
goto error_release_group_hold;
ret = imx412_write_reg(imx412, IMX412_REG_EXPOSURE_CIT, 2, shutter);
if (ret)
goto error_release_group_hold;
ret = imx412_write_reg(imx412, IMX412_REG_AGAIN, 2, gain);
error_release_group_hold:
imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 0);
return ret;
}
/**
* imx412_set_ctrl() - Set subdevice control
* @ctrl: pointer to v4l2_ctrl structure
*
* Supported controls:
* - V4L2_CID_VBLANK
* - cluster controls:
* - V4L2_CID_ANALOGUE_GAIN
* - V4L2_CID_EXPOSURE
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct imx412 *imx412 =
container_of(ctrl->handler, struct imx412, ctrl_handler);
u32 analog_gain;
u32 exposure;
int ret;
switch (ctrl->id) {
case V4L2_CID_VBLANK:
imx412->vblank = imx412->vblank_ctrl->val;
dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u",
imx412->vblank,
imx412->vblank + imx412->cur_mode->height);
ret = __v4l2_ctrl_modify_range(imx412->exp_ctrl,
IMX412_EXPOSURE_MIN,
imx412->vblank +
imx412->cur_mode->height -
IMX412_EXPOSURE_OFFSET,
1, IMX412_EXPOSURE_DEFAULT);
break;
case V4L2_CID_EXPOSURE:
/* Set controls only if sensor is in power on state */
if (!pm_runtime_get_if_in_use(imx412->dev))
return 0;
exposure = ctrl->val;
analog_gain = imx412->again_ctrl->val;
dev_dbg(imx412->dev, "Received exp %u, analog gain %u",
exposure, analog_gain);
ret = imx412_update_exp_gain(imx412, exposure, analog_gain);
pm_runtime_put(imx412->dev);
break;
default:
dev_err(imx412->dev, "Invalid control %d", ctrl->id);
ret = -EINVAL;
}
return ret;
}
/* V4l2 subdevice control ops*/
static const struct v4l2_ctrl_ops imx412_ctrl_ops = {
.s_ctrl = imx412_set_ctrl,
};
/**
* imx412_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes
* @sd: pointer to imx412 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
* @code: V4L2 sub-device code enumeration need to be filled
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->index > 0)
return -EINVAL;
code->code = supported_mode.code;
return 0;
}
/**
* imx412_enum_frame_size() - Enumerate V4L2 sub-device frame sizes
* @sd: pointer to imx412 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
* @fsize: V4L2 sub-device size enumeration need to be filled
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_enum_frame_size(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fsize)
{
if (fsize->index > 0)
return -EINVAL;
if (fsize->code != supported_mode.code)
return -EINVAL;
fsize->min_width = supported_mode.width;
fsize->max_width = fsize->min_width;
fsize->min_height = supported_mode.height;
fsize->max_height = fsize->min_height;
return 0;
}
/**
* imx412_fill_pad_format() - Fill subdevice pad format
* from selected sensor mode
* @imx412: pointer to imx412 device
* @mode: pointer to imx412_mode sensor mode
* @fmt: V4L2 sub-device format need to be filled
*/
static void imx412_fill_pad_format(struct imx412 *imx412,
const struct imx412_mode *mode,
struct v4l2_subdev_format *fmt)
{
fmt->format.width = mode->width;
fmt->format.height = mode->height;
fmt->format.code = mode->code;
fmt->format.field = V4L2_FIELD_NONE;
fmt->format.colorspace = V4L2_COLORSPACE_RAW;
fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT;
fmt->format.xfer_func = V4L2_XFER_FUNC_NONE;
}
/**
* imx412_get_pad_format() - Get subdevice pad format
* @sd: pointer to imx412 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
* @fmt: V4L2 sub-device format need to be set
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_get_pad_format(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct imx412 *imx412 = to_imx412(sd);
mutex_lock(&imx412->mutex);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_mbus_framefmt *framefmt;
framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
fmt->format = *framefmt;
} else {
imx412_fill_pad_format(imx412, imx412->cur_mode, fmt);
}
mutex_unlock(&imx412->mutex);
return 0;
}
/**
* imx412_set_pad_format() - Set subdevice pad format
* @sd: pointer to imx412 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
* @fmt: V4L2 sub-device format need to be set
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_set_pad_format(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct imx412 *imx412 = to_imx412(sd);
const struct imx412_mode *mode;
int ret = 0;
mutex_lock(&imx412->mutex);
mode = &supported_mode;
imx412_fill_pad_format(imx412, mode, fmt);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_mbus_framefmt *framefmt;
framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
*framefmt = fmt->format;
} else {
ret = imx412_update_controls(imx412, mode);
if (!ret)
imx412->cur_mode = mode;
}
mutex_unlock(&imx412->mutex);
return ret;
}
/**
* imx412_init_pad_cfg() - Initialize sub-device pad configuration
* @sd: pointer to imx412 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_init_pad_cfg(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state)
{
struct imx412 *imx412 = to_imx412(sd);
struct v4l2_subdev_format fmt = { 0 };
fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
imx412_fill_pad_format(imx412, &supported_mode, &fmt);
return imx412_set_pad_format(sd, sd_state, &fmt);
}
/**
* imx412_start_streaming() - Start sensor stream
* @imx412: pointer to imx412 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_start_streaming(struct imx412 *imx412)
{
const struct imx412_reg_list *reg_list;
int ret;
/* Write sensor mode registers */
reg_list = &imx412->cur_mode->reg_list;
ret = imx412_write_regs(imx412, reg_list->regs,
reg_list->num_of_regs);
if (ret) {
dev_err(imx412->dev, "fail to write initial registers");
return ret;
}
/* Setup handler will write actual exposure and gain */
ret = __v4l2_ctrl_handler_setup(imx412->sd.ctrl_handler);
if (ret) {
dev_err(imx412->dev, "fail to setup handler");
return ret;
}
/* Delay is required before streaming*/
usleep_range(7400, 8000);
/* Start streaming */
ret = imx412_write_reg(imx412, IMX412_REG_MODE_SELECT,
1, IMX412_MODE_STREAMING);
if (ret) {
dev_err(imx412->dev, "fail to start streaming");
return ret;
}
return 0;
}
/**
* imx412_stop_streaming() - Stop sensor stream
* @imx412: pointer to imx412 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_stop_streaming(struct imx412 *imx412)
{
return imx412_write_reg(imx412, IMX412_REG_MODE_SELECT,
1, IMX412_MODE_STANDBY);
}
/**
* imx412_set_stream() - Enable sensor streaming
* @sd: pointer to imx412 subdevice
* @enable: set to enable sensor streaming
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_set_stream(struct v4l2_subdev *sd, int enable)
{
struct imx412 *imx412 = to_imx412(sd);
int ret;
mutex_lock(&imx412->mutex);
if (imx412->streaming == enable) {
mutex_unlock(&imx412->mutex);
return 0;
}
if (enable) {
ret = pm_runtime_resume_and_get(imx412->dev);
if (ret)
goto error_unlock;
ret = imx412_start_streaming(imx412);
if (ret)
goto error_power_off;
} else {
imx412_stop_streaming(imx412);
pm_runtime_put(imx412->dev);
}
imx412->streaming = enable;
mutex_unlock(&imx412->mutex);
return 0;
error_power_off:
pm_runtime_put(imx412->dev);
error_unlock:
mutex_unlock(&imx412->mutex);
return ret;
}
/**
* imx412_detect() - Detect imx412 sensor
* @imx412: pointer to imx412 device
*
* Return: 0 if successful, -EIO if sensor id does not match
*/
static int imx412_detect(struct imx412 *imx412)
{
int ret;
u32 val;
ret = imx412_read_reg(imx412, IMX412_REG_ID, 2, &val);
if (ret)
return ret;
if (val != IMX412_ID) {
dev_err(imx412->dev, "chip id mismatch: %x!=%x",
IMX412_ID, val);
return -ENXIO;
}
return 0;
}
/**
* imx412_parse_hw_config() - Parse HW configuration and check if supported
* @imx412: pointer to imx412 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_parse_hw_config(struct imx412 *imx412)
{
struct fwnode_handle *fwnode = dev_fwnode(imx412->dev);
struct v4l2_fwnode_endpoint bus_cfg = {
.bus_type = V4L2_MBUS_CSI2_DPHY
};
struct fwnode_handle *ep;
unsigned long rate;
unsigned int i;
int ret;
if (!fwnode)
return -ENXIO;
/* Request optional reset pin */
imx412->reset_gpio = devm_gpiod_get_optional(imx412->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(imx412->reset_gpio)) {
dev_err(imx412->dev, "failed to get reset gpio %ld",
PTR_ERR(imx412->reset_gpio));
return PTR_ERR(imx412->reset_gpio);
}
/* Get sensor input clock */
imx412->inclk = devm_clk_get(imx412->dev, NULL);
if (IS_ERR(imx412->inclk)) {
dev_err(imx412->dev, "could not get inclk");
return PTR_ERR(imx412->inclk);
}
rate = clk_get_rate(imx412->inclk);
if (rate != IMX412_INCLK_RATE) {
dev_err(imx412->dev, "inclk frequency mismatch");
return -EINVAL;
}
/* Get optional DT defined regulators */
for (i = 0; i < ARRAY_SIZE(imx412_supply_names); i++)
imx412->supplies[i].supply = imx412_supply_names[i];
ret = devm_regulator_bulk_get(imx412->dev,
ARRAY_SIZE(imx412_supply_names),
imx412->supplies);
if (ret)
return ret;
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
if (!ep)
return -ENXIO;
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
fwnode_handle_put(ep);
if (ret)
return ret;
if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX412_NUM_DATA_LANES) {
dev_err(imx412->dev,
"number of CSI2 data lanes %d is not supported",
bus_cfg.bus.mipi_csi2.num_data_lanes);
ret = -EINVAL;
goto done_endpoint_free;
}
if (!bus_cfg.nr_of_link_frequencies) {
dev_err(imx412->dev, "no link frequencies defined");
ret = -EINVAL;
goto done_endpoint_free;
}
for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
if (bus_cfg.link_frequencies[i] == IMX412_LINK_FREQ)
goto done_endpoint_free;
ret = -EINVAL;
done_endpoint_free:
v4l2_fwnode_endpoint_free(&bus_cfg);
return ret;
}
/* V4l2 subdevice ops */
static const struct v4l2_subdev_video_ops imx412_video_ops = {
.s_stream = imx412_set_stream,
};
static const struct v4l2_subdev_pad_ops imx412_pad_ops = {
.init_cfg = imx412_init_pad_cfg,
.enum_mbus_code = imx412_enum_mbus_code,
.enum_frame_size = imx412_enum_frame_size,
.get_fmt = imx412_get_pad_format,
.set_fmt = imx412_set_pad_format,
};
static const struct v4l2_subdev_ops imx412_subdev_ops = {
.video = &imx412_video_ops,
.pad = &imx412_pad_ops,
};
/**
* imx412_power_on() - Sensor power on sequence
* @dev: pointer to i2c device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_power_on(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx412 *imx412 = to_imx412(sd);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(imx412_supply_names),
imx412->supplies);
if (ret < 0) {
dev_err(dev, "failed to enable regulators\n");
return ret;
}
gpiod_set_value_cansleep(imx412->reset_gpio, 0);
ret = clk_prepare_enable(imx412->inclk);
if (ret) {
dev_err(imx412->dev, "fail to enable inclk");
goto error_reset;
}
usleep_range(1000, 1200);
return 0;
error_reset:
gpiod_set_value_cansleep(imx412->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(imx412_supply_names),
imx412->supplies);
return ret;
}
/**
* imx412_power_off() - Sensor power off sequence
* @dev: pointer to i2c device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_power_off(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx412 *imx412 = to_imx412(sd);
clk_disable_unprepare(imx412->inclk);
gpiod_set_value_cansleep(imx412->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(imx412_supply_names),
imx412->supplies);
return 0;
}
/**
* imx412_init_controls() - Initialize sensor subdevice controls
* @imx412: pointer to imx412 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_init_controls(struct imx412 *imx412)
{
struct v4l2_ctrl_handler *ctrl_hdlr = &imx412->ctrl_handler;
const struct imx412_mode *mode = imx412->cur_mode;
u32 lpfr;
int ret;
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 6);
if (ret)
return ret;
/* Serialize controls with sensor device */
ctrl_hdlr->lock = &imx412->mutex;
/* Initialize exposure and gain */
lpfr = mode->vblank + mode->height;
imx412->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_EXPOSURE,
IMX412_EXPOSURE_MIN,
lpfr - IMX412_EXPOSURE_OFFSET,
IMX412_EXPOSURE_STEP,
IMX412_EXPOSURE_DEFAULT);
imx412->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_ANALOGUE_GAIN,
IMX412_AGAIN_MIN,
IMX412_AGAIN_MAX,
IMX412_AGAIN_STEP,
IMX412_AGAIN_DEFAULT);
v4l2_ctrl_cluster(2, &imx412->exp_ctrl);
imx412->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_VBLANK,
mode->vblank_min,
mode->vblank_max,
1, mode->vblank);
/* Read only controls */
imx412->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_PIXEL_RATE,
mode->pclk, mode->pclk,
1, mode->pclk);
imx412->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_LINK_FREQ,
ARRAY_SIZE(link_freq) -
1,
mode->link_freq_idx,
link_freq);
if (imx412->link_freq_ctrl)
imx412->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
imx412->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx412_ctrl_ops,
V4L2_CID_HBLANK,
IMX412_REG_MIN,
IMX412_REG_MAX,
1, mode->hblank);
if (imx412->hblank_ctrl)
imx412->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
if (ctrl_hdlr->error) {
dev_err(imx412->dev, "control init failed: %d",
ctrl_hdlr->error);
v4l2_ctrl_handler_free(ctrl_hdlr);
return ctrl_hdlr->error;
}
imx412->sd.ctrl_handler = ctrl_hdlr;
return 0;
}
/**
* imx412_probe() - I2C client device binding
* @client: pointer to i2c client device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx412_probe(struct i2c_client *client)
{
struct imx412 *imx412;
const char *name;
int ret;
imx412 = devm_kzalloc(&client->dev, sizeof(*imx412), GFP_KERNEL);
if (!imx412)
return -ENOMEM;
imx412->dev = &client->dev;
name = device_get_match_data(&client->dev);
if (!name)
return -ENODEV;
/* Initialize subdev */
v4l2_i2c_subdev_init(&imx412->sd, client, &imx412_subdev_ops);
ret = imx412_parse_hw_config(imx412);
if (ret) {
dev_err(imx412->dev, "HW configuration is not supported");
return ret;
}
mutex_init(&imx412->mutex);
ret = imx412_power_on(imx412->dev);
if (ret) {
dev_err(imx412->dev, "failed to power-on the sensor");
goto error_mutex_destroy;
}
/* Check module identity */
ret = imx412_detect(imx412);
if (ret) {
dev_err(imx412->dev, "failed to find sensor: %d", ret);
goto error_power_off;
}
/* Set default mode to max resolution */
imx412->cur_mode = &supported_mode;
imx412->vblank = imx412->cur_mode->vblank;
ret = imx412_init_controls(imx412);
if (ret) {
dev_err(imx412->dev, "failed to init controls: %d", ret);
goto error_power_off;
}
/* Initialize subdev */
imx412->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
imx412->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
v4l2_i2c_subdev_set_name(&imx412->sd, client, name, NULL);
/* Initialize source pad */
imx412->pad.flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&imx412->sd.entity, 1, &imx412->pad);
if (ret) {
dev_err(imx412->dev, "failed to init entity pads: %d", ret);
goto error_handler_free;
}
ret = v4l2_async_register_subdev_sensor(&imx412->sd);
if (ret < 0) {
dev_err(imx412->dev,
"failed to register async subdev: %d", ret);
goto error_media_entity;
}
pm_runtime_set_active(imx412->dev);
pm_runtime_enable(imx412->dev);
pm_runtime_idle(imx412->dev);
return 0;
error_media_entity:
media_entity_cleanup(&imx412->sd.entity);
error_handler_free:
v4l2_ctrl_handler_free(imx412->sd.ctrl_handler);
error_power_off:
imx412_power_off(imx412->dev);
error_mutex_destroy:
mutex_destroy(&imx412->mutex);
return ret;
}
/**
* imx412_remove() - I2C client device unbinding
* @client: pointer to I2C client device
*
* Return: 0 if successful, error code otherwise.
*/
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 16:02:30 +08:00
static void imx412_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct imx412 *imx412 = to_imx412(sd);
v4l2_async_unregister_subdev(sd);
media_entity_cleanup(&sd->entity);
v4l2_ctrl_handler_free(sd->ctrl_handler);
pm_runtime_disable(&client->dev);
if (!pm_runtime_status_suspended(&client->dev))
imx412_power_off(&client->dev);
pm_runtime_set_suspended(&client->dev);
mutex_destroy(&imx412->mutex);
}
static const struct dev_pm_ops imx412_pm_ops = {
SET_RUNTIME_PM_OPS(imx412_power_off, imx412_power_on, NULL)
};
static const struct of_device_id imx412_of_match[] = {
{ .compatible = "sony,imx412", .data = "imx412" },
{ }
};
MODULE_DEVICE_TABLE(of, imx412_of_match);
static struct i2c_driver imx412_driver = {
.probe_new = imx412_probe,
.remove = imx412_remove,
.driver = {
.name = "imx412",
.pm = &imx412_pm_ops,
.of_match_table = imx412_of_match,
},
};
module_i2c_driver(imx412_driver);
MODULE_DESCRIPTION("Sony imx412 sensor driver");
MODULE_LICENSE("GPL");