2018-09-12 09:16:07 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2012-11-29 12:28:09 +08:00
|
|
|
/*
|
2012-11-02 16:10:12 +08:00
|
|
|
* fs/f2fs/data.c
|
|
|
|
*
|
|
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
|
|
* http://www.samsung.com/
|
|
|
|
*/
|
|
|
|
#include <linux/fs.h>
|
|
|
|
#include <linux/f2fs_fs.h>
|
|
|
|
#include <linux/buffer_head.h>
|
mm: introduce memalloc_retry_wait()
Various places in the kernel - largely in filesystems - respond to a
memory allocation failure by looping around and re-trying. Some of
these cannot conveniently use __GFP_NOFAIL, for reasons such as:
- a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on
- a need to check for the process being signalled between failures
- the possibility that other recovery actions could be performed
- the allocation is quite deep in support code, and passing down an
extra flag to say if __GFP_NOFAIL is wanted would be clumsy.
Many of these currently use congestion_wait() which (in almost all
cases) simply waits the given timeout - congestion isn't tracked for
most devices.
It isn't clear what the best delay is for loops, but it is clear that
the various filesystems shouldn't be responsible for choosing a timeout.
This patch introduces memalloc_retry_wait() with takes on that
responsibility. Code that wants to retry a memory allocation can call
this function passing the GFP flags that were used. It will wait
however is appropriate.
For now, it only considers __GFP_NORETRY and whatever
gfpflags_allow_blocking() tests. If blocking is allowed without
__GFP_NORETRY, then alloc_page either made some reclaim progress, or
waited for a while, before failing. So there is no need for much
further waiting. memalloc_retry_wait() will wait until the current
jiffie ends. If this condition is not met, then alloc_page() won't have
waited much if at all. In that case memalloc_retry_wait() waits about
200ms. This is the delay that most current loops uses.
linux/sched/mm.h needs to be included in some files now,
but linux/backing-dev.h does not.
Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:07:14 +08:00
|
|
|
#include <linux/sched/mm.h>
|
2012-11-02 16:10:12 +08:00
|
|
|
#include <linux/mpage.h>
|
|
|
|
#include <linux/writeback.h>
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
#include <linux/pagevec.h>
|
2012-11-02 16:10:12 +08:00
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/bio.h>
|
2020-07-02 09:56:06 +08:00
|
|
|
#include <linux/blk-crypto.h>
|
2019-07-02 10:15:29 +08:00
|
|
|
#include <linux/swap.h>
|
2012-12-20 05:19:30 +08:00
|
|
|
#include <linux/prefetch.h>
|
2015-02-23 00:58:50 +08:00
|
|
|
#include <linux/uio.h>
|
2017-02-03 02:15:33 +08:00
|
|
|
#include <linux/sched/signal.h>
|
2020-05-23 15:30:11 +08:00
|
|
|
#include <linux/fiemap.h>
|
2021-07-23 15:59:20 +08:00
|
|
|
#include <linux/iomap.h>
|
2012-11-02 16:10:12 +08:00
|
|
|
|
|
|
|
#include "f2fs.h"
|
|
|
|
#include "node.h"
|
|
|
|
#include "segment.h"
|
2021-08-20 11:52:28 +08:00
|
|
|
#include "iostat.h"
|
2013-04-23 15:38:02 +08:00
|
|
|
#include <trace/events/f2fs.h>
|
2012-11-02 16:10:12 +08:00
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
#define NUM_PREALLOC_POST_READ_CTXS 128
|
|
|
|
|
|
|
|
static struct kmem_cache *bio_post_read_ctx_cache;
|
2019-09-30 18:53:25 +08:00
|
|
|
static struct kmem_cache *bio_entry_slab;
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
static mempool_t *bio_post_read_ctx_pool;
|
2019-12-04 09:52:58 +08:00
|
|
|
static struct bio_set f2fs_bioset;
|
|
|
|
|
|
|
|
#define F2FS_BIO_POOL_SIZE NR_CURSEG_TYPE
|
|
|
|
|
|
|
|
int __init f2fs_init_bioset(void)
|
|
|
|
{
|
2022-11-25 19:47:36 +08:00
|
|
|
return bioset_init(&f2fs_bioset, F2FS_BIO_POOL_SIZE,
|
|
|
|
0, BIOSET_NEED_BVECS);
|
2019-12-04 09:52:58 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
void f2fs_destroy_bioset(void)
|
|
|
|
{
|
|
|
|
bioset_exit(&f2fs_bioset);
|
|
|
|
}
|
|
|
|
|
2024-01-13 03:41:27 +08:00
|
|
|
bool f2fs_is_cp_guaranteed(struct page *page)
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
{
|
|
|
|
struct address_space *mapping = page->mapping;
|
|
|
|
struct inode *inode;
|
|
|
|
struct f2fs_sb_info *sbi;
|
|
|
|
|
|
|
|
if (!mapping)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
inode = mapping->host;
|
|
|
|
sbi = F2FS_I_SB(inode);
|
|
|
|
|
|
|
|
if (inode->i_ino == F2FS_META_INO(sbi) ||
|
2020-07-24 16:55:28 +08:00
|
|
|
inode->i_ino == F2FS_NODE_INO(sbi) ||
|
2021-04-28 17:20:31 +08:00
|
|
|
S_ISDIR(inode->i_mode))
|
|
|
|
return true;
|
|
|
|
|
2022-04-29 02:18:09 +08:00
|
|
|
if ((S_ISREG(inode->i_mode) && IS_NOQUOTA(inode)) ||
|
2021-04-28 17:20:31 +08:00
|
|
|
page_private_gcing(page))
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
return true;
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2018-10-17 01:20:53 +08:00
|
|
|
static enum count_type __read_io_type(struct page *page)
|
|
|
|
{
|
2019-07-02 10:15:29 +08:00
|
|
|
struct address_space *mapping = page_file_mapping(page);
|
2018-10-17 01:20:53 +08:00
|
|
|
|
|
|
|
if (mapping) {
|
|
|
|
struct inode *inode = mapping->host;
|
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
|
|
|
|
|
|
|
if (inode->i_ino == F2FS_META_INO(sbi))
|
|
|
|
return F2FS_RD_META;
|
|
|
|
|
|
|
|
if (inode->i_ino == F2FS_NODE_INO(sbi))
|
|
|
|
return F2FS_RD_NODE;
|
|
|
|
}
|
|
|
|
return F2FS_RD_DATA;
|
|
|
|
}
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
/* postprocessing steps for read bios */
|
|
|
|
enum bio_post_read_step {
|
2021-01-05 14:33:02 +08:00
|
|
|
#ifdef CONFIG_FS_ENCRYPTION
|
2023-02-16 21:53:24 +08:00
|
|
|
STEP_DECRYPT = BIT(0),
|
2021-01-05 14:33:02 +08:00
|
|
|
#else
|
|
|
|
STEP_DECRYPT = 0, /* compile out the decryption-related code */
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
2023-02-16 21:53:24 +08:00
|
|
|
STEP_DECOMPRESS = BIT(1),
|
2021-01-05 14:33:02 +08:00
|
|
|
#else
|
|
|
|
STEP_DECOMPRESS = 0, /* compile out the decompression-related code */
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_FS_VERITY
|
2023-02-16 21:53:24 +08:00
|
|
|
STEP_VERITY = BIT(2),
|
2021-01-05 14:33:02 +08:00
|
|
|
#else
|
|
|
|
STEP_VERITY = 0, /* compile out the verity-related code */
|
|
|
|
#endif
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct bio_post_read_ctx {
|
|
|
|
struct bio *bio;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
struct f2fs_sb_info *sbi;
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
struct work_struct work;
|
|
|
|
unsigned int enabled_steps;
|
2022-11-29 15:04:01 +08:00
|
|
|
/*
|
|
|
|
* decompression_attempted keeps track of whether
|
|
|
|
* f2fs_end_read_compressed_page() has been called on the pages in the
|
|
|
|
* bio that belong to a compressed cluster yet.
|
|
|
|
*/
|
|
|
|
bool decompression_attempted;
|
2021-07-29 03:38:11 +08:00
|
|
|
block_t fs_blkaddr;
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
};
|
|
|
|
|
2022-11-29 15:04:01 +08:00
|
|
|
/*
|
|
|
|
* Update and unlock a bio's pages, and free the bio.
|
|
|
|
*
|
|
|
|
* This marks pages up-to-date only if there was no error in the bio (I/O error,
|
|
|
|
* decryption error, or verity error), as indicated by bio->bi_status.
|
|
|
|
*
|
|
|
|
* "Compressed pages" (pagecache pages backed by a compressed cluster on-disk)
|
|
|
|
* aren't marked up-to-date here, as decompression is done on a per-compression-
|
|
|
|
* cluster basis rather than a per-bio basis. Instead, we only must do two
|
|
|
|
* things for each compressed page here: call f2fs_end_read_compressed_page()
|
|
|
|
* with failed=true if an error occurred before it would have normally gotten
|
|
|
|
* called (i.e., I/O error or decryption error, but *not* verity error), and
|
|
|
|
* release the bio's reference to the decompress_io_ctx of the page's cluster.
|
|
|
|
*/
|
2022-08-03 03:24:37 +08:00
|
|
|
static void f2fs_finish_read_bio(struct bio *bio, bool in_task)
|
2013-11-30 11:51:14 +08:00
|
|
|
{
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
struct bio_vec *bv;
|
2019-02-15 19:13:19 +08:00
|
|
|
struct bvec_iter_all iter_all;
|
2022-11-29 15:04:01 +08:00
|
|
|
struct bio_post_read_ctx *ctx = bio->bi_private;
|
2013-11-30 11:51:14 +08:00
|
|
|
|
2019-04-25 15:03:00 +08:00
|
|
|
bio_for_each_segment_all(bv, bio, iter_all) {
|
2021-01-05 14:33:02 +08:00
|
|
|
struct page *page = bv->bv_page;
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
if (f2fs_is_compressed_page(page)) {
|
2022-11-29 15:04:01 +08:00
|
|
|
if (ctx && !ctx->decompression_attempted)
|
2022-08-03 03:24:37 +08:00
|
|
|
f2fs_end_read_compressed_page(page, true, 0,
|
|
|
|
in_task);
|
|
|
|
f2fs_put_page_dic(page, in_task);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2022-11-29 15:04:01 +08:00
|
|
|
if (bio->bi_status)
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
ClearPageUptodate(page);
|
2022-11-29 15:04:01 +08:00
|
|
|
else
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
SetPageUptodate(page);
|
2018-10-17 01:20:53 +08:00
|
|
|
dec_page_count(F2FS_P_SB(page), __read_io_type(page));
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
unlock_page(page);
|
|
|
|
}
|
2020-03-23 17:43:04 +08:00
|
|
|
|
2022-11-29 15:04:01 +08:00
|
|
|
if (ctx)
|
|
|
|
mempool_free(ctx, bio_post_read_ctx_pool);
|
2021-01-05 14:33:02 +08:00
|
|
|
bio_put(bio);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
}
|
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
static void f2fs_verify_bio(struct work_struct *work)
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
{
|
|
|
|
struct bio_post_read_ctx *ctx =
|
|
|
|
container_of(work, struct bio_post_read_ctx, work);
|
2020-01-01 02:14:16 +08:00
|
|
|
struct bio *bio = ctx->bio;
|
2021-01-05 14:33:02 +08:00
|
|
|
bool may_have_compressed_pages = (ctx->enabled_steps & STEP_DECOMPRESS);
|
2020-01-01 02:14:16 +08:00
|
|
|
|
|
|
|
/*
|
2022-03-24 09:29:04 +08:00
|
|
|
* fsverity_verify_bio() may call readahead() again, and while verity
|
2021-01-05 14:33:02 +08:00
|
|
|
* will be disabled for this, decryption and/or decompression may still
|
|
|
|
* be needed, resulting in another bio_post_read_ctx being allocated.
|
|
|
|
* So to prevent deadlocks we need to release the current ctx to the
|
|
|
|
* mempool first. This assumes that verity is the last post-read step.
|
2020-01-01 02:14:16 +08:00
|
|
|
*/
|
|
|
|
mempool_free(ctx, bio_post_read_ctx_pool);
|
|
|
|
bio->bi_private = NULL;
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
/*
|
|
|
|
* Verify the bio's pages with fs-verity. Exclude compressed pages,
|
|
|
|
* as those were handled separately by f2fs_end_read_compressed_page().
|
|
|
|
*/
|
|
|
|
if (may_have_compressed_pages) {
|
|
|
|
struct bio_vec *bv;
|
|
|
|
struct bvec_iter_all iter_all;
|
|
|
|
|
|
|
|
bio_for_each_segment_all(bv, bio, iter_all) {
|
|
|
|
struct page *page = bv->bv_page;
|
|
|
|
|
|
|
|
if (!f2fs_is_compressed_page(page) &&
|
2022-11-29 15:04:01 +08:00
|
|
|
!fsverity_verify_page(page)) {
|
|
|
|
bio->bi_status = BLK_STS_IOERR;
|
|
|
|
break;
|
|
|
|
}
|
2021-01-05 14:33:02 +08:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
fsverity_verify_bio(bio);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
}
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
|
2022-08-03 03:24:37 +08:00
|
|
|
f2fs_finish_read_bio(bio, true);
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
}
|
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
/*
|
|
|
|
* If the bio's data needs to be verified with fs-verity, then enqueue the
|
|
|
|
* verity work for the bio. Otherwise finish the bio now.
|
|
|
|
*
|
|
|
|
* Note that to avoid deadlocks, the verity work can't be done on the
|
|
|
|
* decryption/decompression workqueue. This is because verifying the data pages
|
|
|
|
* can involve reading verity metadata pages from the file, and these verity
|
|
|
|
* metadata pages may be encrypted and/or compressed.
|
|
|
|
*/
|
2022-08-03 03:24:37 +08:00
|
|
|
static void f2fs_verify_and_finish_bio(struct bio *bio, bool in_task)
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
|
|
|
{
|
2021-01-05 14:33:02 +08:00
|
|
|
struct bio_post_read_ctx *ctx = bio->bi_private;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
if (ctx && (ctx->enabled_steps & STEP_VERITY)) {
|
|
|
|
INIT_WORK(&ctx->work, f2fs_verify_bio);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
fsverity_enqueue_verify_work(&ctx->work);
|
2021-01-05 14:33:02 +08:00
|
|
|
} else {
|
2022-08-03 03:24:37 +08:00
|
|
|
f2fs_finish_read_bio(bio, in_task);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
}
|
|
|
|
}
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
/*
|
|
|
|
* Handle STEP_DECOMPRESS by decompressing any compressed clusters whose last
|
|
|
|
* remaining page was read by @ctx->bio.
|
|
|
|
*
|
|
|
|
* Note that a bio may span clusters (even a mix of compressed and uncompressed
|
|
|
|
* clusters) or be for just part of a cluster. STEP_DECOMPRESS just indicates
|
|
|
|
* that the bio includes at least one compressed page. The actual decompression
|
|
|
|
* is done on a per-cluster basis, not a per-bio basis.
|
|
|
|
*/
|
2022-08-03 03:24:37 +08:00
|
|
|
static void f2fs_handle_step_decompress(struct bio_post_read_ctx *ctx,
|
|
|
|
bool in_task)
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
{
|
2021-01-05 14:33:02 +08:00
|
|
|
struct bio_vec *bv;
|
|
|
|
struct bvec_iter_all iter_all;
|
|
|
|
bool all_compressed = true;
|
2021-07-29 03:38:11 +08:00
|
|
|
block_t blkaddr = ctx->fs_blkaddr;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
bio_for_each_segment_all(bv, ctx->bio, iter_all) {
|
|
|
|
struct page *page = bv->bv_page;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
if (f2fs_is_compressed_page(page))
|
2022-08-16 07:50:51 +08:00
|
|
|
f2fs_end_read_compressed_page(page, false, blkaddr,
|
|
|
|
in_task);
|
2021-01-05 14:33:02 +08:00
|
|
|
else
|
|
|
|
all_compressed = false;
|
2021-05-20 19:51:50 +08:00
|
|
|
|
|
|
|
blkaddr++;
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
}
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2022-11-29 15:04:01 +08:00
|
|
|
ctx->decompression_attempted = true;
|
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
/*
|
|
|
|
* Optimization: if all the bio's pages are compressed, then scheduling
|
|
|
|
* the per-bio verity work is unnecessary, as verity will be fully
|
|
|
|
* handled at the compression cluster level.
|
|
|
|
*/
|
|
|
|
if (all_compressed)
|
|
|
|
ctx->enabled_steps &= ~STEP_VERITY;
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
}
|
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
static void f2fs_post_read_work(struct work_struct *work)
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
{
|
2021-01-05 14:33:02 +08:00
|
|
|
struct bio_post_read_ctx *ctx =
|
|
|
|
container_of(work, struct bio_post_read_ctx, work);
|
2022-08-16 07:50:51 +08:00
|
|
|
struct bio *bio = ctx->bio;
|
2021-01-05 14:33:02 +08:00
|
|
|
|
2022-08-16 07:50:51 +08:00
|
|
|
if ((ctx->enabled_steps & STEP_DECRYPT) && !fscrypt_decrypt_bio(bio)) {
|
|
|
|
f2fs_finish_read_bio(bio, true);
|
|
|
|
return;
|
|
|
|
}
|
2021-01-05 14:33:02 +08:00
|
|
|
|
|
|
|
if (ctx->enabled_steps & STEP_DECOMPRESS)
|
2022-08-03 03:24:37 +08:00
|
|
|
f2fs_handle_step_decompress(ctx, true);
|
2021-01-05 14:33:02 +08:00
|
|
|
|
2022-08-16 07:50:51 +08:00
|
|
|
f2fs_verify_and_finish_bio(bio, true);
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void f2fs_read_end_io(struct bio *bio)
|
|
|
|
{
|
2019-11-01 17:53:23 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_P_SB(bio_first_page_all(bio));
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
struct bio_post_read_ctx *ctx;
|
2022-08-03 03:24:37 +08:00
|
|
|
bool intask = in_task();
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
|
2023-02-01 18:47:02 +08:00
|
|
|
iostat_update_and_unbind_ctx(bio);
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
ctx = bio->bi_private;
|
2019-11-01 17:53:23 +08:00
|
|
|
|
2022-12-21 02:39:04 +08:00
|
|
|
if (time_to_inject(sbi, FAULT_READ_IO))
|
2017-06-03 15:38:06 +08:00
|
|
|
bio->bi_status = BLK_STS_IOERR;
|
2016-09-18 23:30:07 +08:00
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
if (bio->bi_status) {
|
2022-08-03 03:24:37 +08:00
|
|
|
f2fs_finish_read_bio(bio, intask);
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
return;
|
2015-04-10 02:20:42 +08:00
|
|
|
}
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
|
2022-08-03 03:24:37 +08:00
|
|
|
if (ctx) {
|
|
|
|
unsigned int enabled_steps = ctx->enabled_steps &
|
|
|
|
(STEP_DECRYPT | STEP_DECOMPRESS);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If we have only decompression step between decompression and
|
|
|
|
* decrypt, we don't need post processing for this.
|
|
|
|
*/
|
|
|
|
if (enabled_steps == STEP_DECOMPRESS &&
|
|
|
|
!f2fs_low_mem_mode(sbi)) {
|
|
|
|
f2fs_handle_step_decompress(ctx, intask);
|
|
|
|
} else if (enabled_steps) {
|
|
|
|
INIT_WORK(&ctx->work, f2fs_post_read_work);
|
|
|
|
queue_work(ctx->sbi->post_read_wq, &ctx->work);
|
|
|
|
return;
|
|
|
|
}
|
2021-01-05 14:33:02 +08:00
|
|
|
}
|
2022-08-03 03:24:37 +08:00
|
|
|
|
|
|
|
f2fs_verify_and_finish_bio(bio, intask);
|
2015-04-10 02:20:42 +08:00
|
|
|
}
|
|
|
|
|
2015-07-20 21:29:37 +08:00
|
|
|
static void f2fs_write_end_io(struct bio *bio)
|
2013-11-30 11:51:14 +08:00
|
|
|
{
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
struct f2fs_sb_info *sbi;
|
2014-01-31 03:19:05 +08:00
|
|
|
struct bio_vec *bvec;
|
2019-02-15 19:13:19 +08:00
|
|
|
struct bvec_iter_all iter_all;
|
2013-11-30 11:51:14 +08:00
|
|
|
|
2023-02-01 18:47:02 +08:00
|
|
|
iostat_update_and_unbind_ctx(bio);
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
sbi = bio->bi_private;
|
|
|
|
|
2022-12-21 02:39:04 +08:00
|
|
|
if (time_to_inject(sbi, FAULT_WRITE_IO))
|
2018-09-12 09:22:29 +08:00
|
|
|
bio->bi_status = BLK_STS_IOERR;
|
|
|
|
|
2019-04-25 15:03:00 +08:00
|
|
|
bio_for_each_segment_all(bvec, bio, iter_all) {
|
2013-11-30 11:51:14 +08:00
|
|
|
struct page *page = bvec->bv_page;
|
2024-01-13 03:41:27 +08:00
|
|
|
enum count_type type = WB_DATA_TYPE(page, false);
|
2013-11-30 11:51:14 +08:00
|
|
|
|
2019-05-21 00:29:39 +08:00
|
|
|
fscrypt_finalize_bounce_page(&page);
|
2015-04-24 03:04:33 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
if (f2fs_is_compressed_page(page)) {
|
|
|
|
f2fs_compress_write_end_io(bio, page);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2017-06-03 15:38:06 +08:00
|
|
|
if (unlikely(bio->bi_status)) {
|
2016-10-12 04:56:01 +08:00
|
|
|
mapping_set_error(page->mapping, -EIO);
|
2018-01-01 08:26:38 +08:00
|
|
|
if (type == F2FS_WB_CP_DATA)
|
2022-09-28 23:38:53 +08:00
|
|
|
f2fs_stop_checkpoint(sbi, true,
|
|
|
|
STOP_CP_REASON_WRITE_FAIL);
|
2013-11-30 11:51:14 +08:00
|
|
|
}
|
2018-01-11 14:19:32 +08:00
|
|
|
|
|
|
|
f2fs_bug_on(sbi, page->mapping == NODE_MAPPING(sbi) &&
|
|
|
|
page->index != nid_of_node(page));
|
|
|
|
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
dec_page_count(sbi, type);
|
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 23:03:19 +08:00
|
|
|
if (f2fs_in_warm_node_list(sbi, page))
|
|
|
|
f2fs_del_fsync_node_entry(sbi, page);
|
2021-04-28 17:20:31 +08:00
|
|
|
clear_page_private_gcing(page);
|
2013-11-30 11:51:14 +08:00
|
|
|
end_page_writeback(page);
|
2014-01-31 03:19:05 +08:00
|
|
|
}
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
if (!get_pages(sbi, F2FS_WB_CP_DATA) &&
|
2016-05-18 07:23:36 +08:00
|
|
|
wq_has_sleeper(&sbi->cp_wait))
|
2013-11-30 11:51:14 +08:00
|
|
|
wake_up(&sbi->cp_wait);
|
|
|
|
|
|
|
|
bio_put(bio);
|
|
|
|
}
|
|
|
|
|
2023-05-04 04:53:49 +08:00
|
|
|
#ifdef CONFIG_BLK_DEV_ZONED
|
|
|
|
static void f2fs_zone_write_end_io(struct bio *bio)
|
|
|
|
{
|
|
|
|
struct f2fs_bio_info *io = (struct f2fs_bio_info *)bio->bi_private;
|
|
|
|
|
|
|
|
bio->bi_private = io->bi_private;
|
|
|
|
complete(&io->zone_wait);
|
|
|
|
f2fs_write_end_io(bio);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2016-10-07 10:02:05 +08:00
|
|
|
struct block_device *f2fs_target_device(struct f2fs_sb_info *sbi,
|
2022-02-28 20:41:22 +08:00
|
|
|
block_t blk_addr, sector_t *sector)
|
2016-10-07 10:02:05 +08:00
|
|
|
{
|
|
|
|
struct block_device *bdev = sbi->sb->s_bdev;
|
|
|
|
int i;
|
|
|
|
|
2019-03-16 08:13:06 +08:00
|
|
|
if (f2fs_is_multi_device(sbi)) {
|
|
|
|
for (i = 0; i < sbi->s_ndevs; i++) {
|
|
|
|
if (FDEV(i).start_blk <= blk_addr &&
|
|
|
|
FDEV(i).end_blk >= blk_addr) {
|
|
|
|
blk_addr -= FDEV(i).start_blk;
|
|
|
|
bdev = FDEV(i).bdev;
|
|
|
|
break;
|
|
|
|
}
|
2016-10-07 10:02:05 +08:00
|
|
|
}
|
|
|
|
}
|
2022-02-28 20:41:22 +08:00
|
|
|
|
|
|
|
if (sector)
|
|
|
|
*sector = SECTOR_FROM_BLOCK(blk_addr);
|
2016-10-07 10:02:05 +08:00
|
|
|
return bdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
int f2fs_target_device_index(struct f2fs_sb_info *sbi, block_t blkaddr)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
2019-03-16 08:13:06 +08:00
|
|
|
if (!f2fs_is_multi_device(sbi))
|
|
|
|
return 0;
|
|
|
|
|
2016-10-07 10:02:05 +08:00
|
|
|
for (i = 0; i < sbi->s_ndevs; i++)
|
|
|
|
if (FDEV(i).start_blk <= blkaddr && FDEV(i).end_blk >= blkaddr)
|
|
|
|
return i;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2022-07-15 02:07:18 +08:00
|
|
|
static blk_opf_t f2fs_io_flags(struct f2fs_io_info *fio)
|
2022-02-28 20:41:23 +08:00
|
|
|
{
|
2023-02-16 21:53:24 +08:00
|
|
|
unsigned int temp_mask = GENMASK(NR_TEMP_TYPE - 1, 0);
|
2022-04-13 06:01:58 +08:00
|
|
|
unsigned int fua_flag, meta_flag, io_flag;
|
2022-07-15 02:07:18 +08:00
|
|
|
blk_opf_t op_flags = 0;
|
2022-04-13 06:01:58 +08:00
|
|
|
|
|
|
|
if (fio->op != REQ_OP_WRITE)
|
|
|
|
return 0;
|
|
|
|
if (fio->type == DATA)
|
|
|
|
io_flag = fio->sbi->data_io_flag;
|
|
|
|
else if (fio->type == NODE)
|
|
|
|
io_flag = fio->sbi->node_io_flag;
|
|
|
|
else
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fua_flag = io_flag & temp_mask;
|
|
|
|
meta_flag = (io_flag >> NR_TEMP_TYPE) & temp_mask;
|
2022-02-28 20:41:23 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* data/node io flag bits per temp:
|
|
|
|
* REQ_META | REQ_FUA |
|
|
|
|
* 5 | 4 | 3 | 2 | 1 | 0 |
|
|
|
|
* Cold | Warm | Hot | Cold | Warm | Hot |
|
|
|
|
*/
|
2023-02-16 21:53:24 +08:00
|
|
|
if (BIT(fio->temp) & meta_flag)
|
2022-04-13 06:01:58 +08:00
|
|
|
op_flags |= REQ_META;
|
2023-02-16 21:53:24 +08:00
|
|
|
if (BIT(fio->temp) & fua_flag)
|
2022-04-13 06:01:58 +08:00
|
|
|
op_flags |= REQ_FUA;
|
|
|
|
return op_flags;
|
2022-02-28 20:41:23 +08:00
|
|
|
}
|
|
|
|
|
2019-08-23 17:58:35 +08:00
|
|
|
static struct bio *__bio_alloc(struct f2fs_io_info *fio, int npages)
|
2013-12-20 17:39:59 +08:00
|
|
|
{
|
2019-08-23 17:58:35 +08:00
|
|
|
struct f2fs_sb_info *sbi = fio->sbi;
|
2022-02-28 20:41:22 +08:00
|
|
|
struct block_device *bdev;
|
|
|
|
sector_t sector;
|
2013-12-20 17:39:59 +08:00
|
|
|
struct bio *bio;
|
|
|
|
|
2022-02-28 20:41:22 +08:00
|
|
|
bdev = f2fs_target_device(sbi, fio->new_blkaddr, §or);
|
2022-04-13 06:01:58 +08:00
|
|
|
bio = bio_alloc_bioset(bdev, npages,
|
|
|
|
fio->op | fio->op_flags | f2fs_io_flags(fio),
|
|
|
|
GFP_NOIO, &f2fs_bioset);
|
2022-02-28 20:41:22 +08:00
|
|
|
bio->bi_iter.bi_sector = sector;
|
2019-08-23 17:58:35 +08:00
|
|
|
if (is_read_io(fio->op)) {
|
2018-01-31 10:36:57 +08:00
|
|
|
bio->bi_end_io = f2fs_read_end_io;
|
|
|
|
bio->bi_private = NULL;
|
|
|
|
} else {
|
|
|
|
bio->bi_end_io = f2fs_write_end_io;
|
|
|
|
bio->bi_private = sbi;
|
2024-04-18 04:01:55 +08:00
|
|
|
bio->bi_write_hint = f2fs_io_type_to_rw_hint(sbi,
|
|
|
|
fio->type, fio->temp);
|
2018-01-31 10:36:57 +08:00
|
|
|
}
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
iostat_alloc_and_bind_ctx(sbi, bio, NULL);
|
|
|
|
|
2019-08-23 17:58:35 +08:00
|
|
|
if (fio->io_wbc)
|
|
|
|
wbc_init_bio(fio->io_wbc, bio);
|
2013-12-20 17:39:59 +08:00
|
|
|
|
|
|
|
return bio;
|
|
|
|
}
|
|
|
|
|
2020-07-02 09:56:06 +08:00
|
|
|
static void f2fs_set_bio_crypt_ctx(struct bio *bio, const struct inode *inode,
|
|
|
|
pgoff_t first_idx,
|
|
|
|
const struct f2fs_io_info *fio,
|
|
|
|
gfp_t gfp_mask)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* The f2fs garbage collector sets ->encrypted_page when it wants to
|
|
|
|
* read/write raw data without encryption.
|
|
|
|
*/
|
|
|
|
if (!fio || !fio->encrypted_page)
|
|
|
|
fscrypt_set_bio_crypt_ctx(bio, inode, first_idx, gfp_mask);
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool f2fs_crypt_mergeable_bio(struct bio *bio, const struct inode *inode,
|
|
|
|
pgoff_t next_idx,
|
|
|
|
const struct f2fs_io_info *fio)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* The f2fs garbage collector sets ->encrypted_page when it wants to
|
|
|
|
* read/write raw data without encryption.
|
|
|
|
*/
|
|
|
|
if (fio && fio->encrypted_page)
|
|
|
|
return !bio_has_crypt_ctx(bio);
|
|
|
|
|
|
|
|
return fscrypt_mergeable_bio(bio, inode, next_idx);
|
|
|
|
}
|
|
|
|
|
2022-11-28 17:15:12 +08:00
|
|
|
void f2fs_submit_read_bio(struct f2fs_sb_info *sbi, struct bio *bio,
|
|
|
|
enum page_type type)
|
2016-05-18 07:23:36 +08:00
|
|
|
{
|
2022-11-28 17:15:12 +08:00
|
|
|
WARN_ON_ONCE(!is_read_io(bio_op(bio)));
|
|
|
|
trace_f2fs_submit_read_bio(sbi->sb, type, bio);
|
2016-12-15 02:12:56 +08:00
|
|
|
|
2022-11-28 17:15:12 +08:00
|
|
|
iostat_update_submit_ctx(bio, type);
|
|
|
|
submit_bio(bio);
|
|
|
|
}
|
2016-12-15 02:12:56 +08:00
|
|
|
|
2022-11-28 17:15:12 +08:00
|
|
|
static void f2fs_submit_write_bio(struct f2fs_sb_info *sbi, struct bio *bio,
|
|
|
|
enum page_type type)
|
|
|
|
{
|
|
|
|
WARN_ON_ONCE(is_read_io(bio_op(bio)));
|
2021-04-28 17:20:31 +08:00
|
|
|
|
2024-02-07 03:21:00 +08:00
|
|
|
if (f2fs_lfs_mode(sbi) && current->plug && PAGE_TYPE_ON_MAIN(type))
|
|
|
|
blk_finish_plug(current->plug);
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
|
2022-11-28 17:15:12 +08:00
|
|
|
trace_f2fs_submit_write_bio(sbi->sb, type, bio);
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
iostat_update_submit_ctx(bio, type);
|
2016-06-06 03:31:41 +08:00
|
|
|
submit_bio(bio);
|
2016-05-18 07:23:36 +08:00
|
|
|
}
|
|
|
|
|
2013-12-11 12:54:01 +08:00
|
|
|
static void __submit_merged_bio(struct f2fs_bio_info *io)
|
2013-11-30 11:51:14 +08:00
|
|
|
{
|
2013-12-11 12:54:01 +08:00
|
|
|
struct f2fs_io_info *fio = &io->fio;
|
2013-11-30 11:51:14 +08:00
|
|
|
|
|
|
|
if (!io->bio)
|
|
|
|
return;
|
|
|
|
|
2022-11-28 17:15:12 +08:00
|
|
|
if (is_read_io(fio->op)) {
|
2016-12-22 04:13:03 +08:00
|
|
|
trace_f2fs_prepare_read_bio(io->sbi->sb, fio->type, io->bio);
|
2022-11-28 17:15:12 +08:00
|
|
|
f2fs_submit_read_bio(io->sbi, io->bio, fio->type);
|
|
|
|
} else {
|
2016-12-22 04:13:03 +08:00
|
|
|
trace_f2fs_prepare_write_bio(io->sbi->sb, fio->type, io->bio);
|
2022-11-28 17:15:12 +08:00
|
|
|
f2fs_submit_write_bio(io->sbi, io->bio, fio->type);
|
|
|
|
}
|
2013-11-30 11:51:14 +08:00
|
|
|
io->bio = NULL;
|
|
|
|
}
|
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
static bool __has_merged_page(struct bio *bio, struct inode *inode,
|
2018-09-27 23:41:16 +08:00
|
|
|
struct page *page, nid_t ino)
|
2016-01-18 18:24:59 +08:00
|
|
|
{
|
|
|
|
struct bio_vec *bvec;
|
2019-02-15 19:13:19 +08:00
|
|
|
struct bvec_iter_all iter_all;
|
2016-01-18 18:24:59 +08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
if (!bio)
|
2016-01-18 18:24:59 +08:00
|
|
|
return false;
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
if (!inode && !page && !ino)
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
return true;
|
2016-01-18 18:24:59 +08:00
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
bio_for_each_segment_all(bvec, bio, iter_all) {
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
struct page *target = bvec->bv_page;
|
2016-01-18 18:24:59 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (fscrypt_is_bounce_page(target)) {
|
2019-05-21 00:29:39 +08:00
|
|
|
target = fscrypt_pagecache_page(target);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (IS_ERR(target))
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (f2fs_is_compressed_page(target)) {
|
|
|
|
target = f2fs_compress_control_page(target);
|
|
|
|
if (IS_ERR(target))
|
|
|
|
continue;
|
|
|
|
}
|
2016-01-18 18:24:59 +08:00
|
|
|
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
if (inode && inode == target->mapping->host)
|
|
|
|
return true;
|
2018-09-27 23:41:16 +08:00
|
|
|
if (page && page == target)
|
|
|
|
return true;
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
if (ino && ino == ino_of_node(target))
|
2016-01-18 18:24:59 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2022-05-25 17:43:36 +08:00
|
|
|
int f2fs_init_write_merge_io(struct f2fs_sb_info *sbi)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < NR_PAGE_TYPE; i++) {
|
|
|
|
int n = (i == META) ? 1 : NR_TEMP_TYPE;
|
|
|
|
int j;
|
|
|
|
|
|
|
|
sbi->write_io[i] = f2fs_kmalloc(sbi,
|
|
|
|
array_size(n, sizeof(struct f2fs_bio_info)),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!sbi->write_io[i])
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
for (j = HOT; j < n; j++) {
|
2024-05-14 19:35:29 +08:00
|
|
|
struct f2fs_bio_info *io = &sbi->write_io[i][j];
|
|
|
|
|
|
|
|
init_f2fs_rwsem(&io->io_rwsem);
|
|
|
|
io->sbi = sbi;
|
|
|
|
io->bio = NULL;
|
|
|
|
io->last_block_in_bio = 0;
|
|
|
|
spin_lock_init(&io->io_lock);
|
|
|
|
INIT_LIST_HEAD(&io->io_list);
|
|
|
|
INIT_LIST_HEAD(&io->bio_list);
|
|
|
|
init_f2fs_rwsem(&io->bio_list_lock);
|
2023-05-04 04:53:49 +08:00
|
|
|
#ifdef CONFIG_BLK_DEV_ZONED
|
2024-05-14 19:35:29 +08:00
|
|
|
init_completion(&io->zone_wait);
|
|
|
|
io->zone_pending_bio = NULL;
|
|
|
|
io->bi_private = NULL;
|
2023-05-04 04:53:49 +08:00
|
|
|
#endif
|
2022-05-25 17:43:36 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-05-11 02:28:38 +08:00
|
|
|
static void __f2fs_submit_merged_write(struct f2fs_sb_info *sbi,
|
2017-05-11 02:18:25 +08:00
|
|
|
enum page_type type, enum temp_type temp)
|
2013-11-30 11:51:14 +08:00
|
|
|
{
|
|
|
|
enum page_type btype = PAGE_TYPE_OF_BIO(type);
|
2017-05-11 02:18:25 +08:00
|
|
|
struct f2fs_bio_info *io = sbi->write_io[btype] + temp;
|
2013-11-30 11:51:14 +08:00
|
|
|
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_write(&io->io_rwsem);
|
2013-12-11 12:54:01 +08:00
|
|
|
|
2023-02-06 11:13:39 +08:00
|
|
|
if (!io->bio)
|
|
|
|
goto unlock_out;
|
|
|
|
|
2013-12-11 12:54:01 +08:00
|
|
|
/* change META to META_FLUSH in the checkpoint procedure */
|
|
|
|
if (type >= META_FLUSH) {
|
|
|
|
io->fio.type = META_FLUSH;
|
2022-02-28 20:41:23 +08:00
|
|
|
io->bio->bi_opf |= REQ_META | REQ_PRIO | REQ_SYNC;
|
2016-11-01 21:40:10 +08:00
|
|
|
if (!test_opt(sbi, NOBARRIER))
|
2022-02-28 20:41:23 +08:00
|
|
|
io->bio->bi_opf |= REQ_PREFLUSH | REQ_FUA;
|
2013-12-11 12:54:01 +08:00
|
|
|
}
|
|
|
|
__submit_merged_bio(io);
|
2023-02-06 11:13:39 +08:00
|
|
|
unlock_out:
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_write(&io->io_rwsem);
|
2013-11-30 11:51:14 +08:00
|
|
|
}
|
|
|
|
|
2017-05-11 02:18:25 +08:00
|
|
|
static void __submit_merged_write_cond(struct f2fs_sb_info *sbi,
|
2018-09-27 23:41:16 +08:00
|
|
|
struct inode *inode, struct page *page,
|
|
|
|
nid_t ino, enum page_type type, bool force)
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
{
|
2017-05-11 02:18:25 +08:00
|
|
|
enum temp_type temp;
|
2018-11-13 11:57:32 +08:00
|
|
|
bool ret = true;
|
2017-05-11 02:18:25 +08:00
|
|
|
|
|
|
|
for (temp = HOT; temp < NR_TEMP_TYPE; temp++) {
|
2018-11-13 11:57:32 +08:00
|
|
|
if (!force) {
|
|
|
|
enum page_type btype = PAGE_TYPE_OF_BIO(type);
|
|
|
|
struct f2fs_bio_info *io = sbi->write_io[btype] + temp;
|
2017-05-11 02:18:25 +08:00
|
|
|
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_read(&io->io_rwsem);
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
ret = __has_merged_page(io->bio, inode, page, ino);
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_read(&io->io_rwsem);
|
2018-11-13 11:57:32 +08:00
|
|
|
}
|
|
|
|
if (ret)
|
|
|
|
__f2fs_submit_merged_write(sbi, type, temp);
|
2017-05-11 02:18:25 +08:00
|
|
|
|
|
|
|
/* TODO: use HOT temp only for meta pages now. */
|
|
|
|
if (type >= META)
|
|
|
|
break;
|
|
|
|
}
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
}
|
|
|
|
|
2017-05-11 02:28:38 +08:00
|
|
|
void f2fs_submit_merged_write(struct f2fs_sb_info *sbi, enum page_type type)
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
{
|
2019-04-06 18:59:36 +08:00
|
|
|
__submit_merged_write_cond(sbi, NULL, NULL, 0, type, true);
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
}
|
|
|
|
|
2017-05-11 02:28:38 +08:00
|
|
|
void f2fs_submit_merged_write_cond(struct f2fs_sb_info *sbi,
|
2018-09-27 23:41:16 +08:00
|
|
|
struct inode *inode, struct page *page,
|
|
|
|
nid_t ino, enum page_type type)
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
{
|
2018-09-27 23:41:16 +08:00
|
|
|
__submit_merged_write_cond(sbi, inode, page, ino, type, false);
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
}
|
|
|
|
|
2017-05-11 02:28:38 +08:00
|
|
|
void f2fs_flush_merged_writes(struct f2fs_sb_info *sbi)
|
2016-02-24 17:17:55 +08:00
|
|
|
{
|
2017-05-11 02:28:38 +08:00
|
|
|
f2fs_submit_merged_write(sbi, DATA);
|
|
|
|
f2fs_submit_merged_write(sbi, NODE);
|
|
|
|
f2fs_submit_merged_write(sbi, META);
|
2016-02-24 17:17:55 +08:00
|
|
|
}
|
|
|
|
|
2013-11-30 11:51:14 +08:00
|
|
|
/*
|
|
|
|
* Fill the locked page with data located in the block address.
|
2017-04-06 03:49:44 +08:00
|
|
|
* A caller needs to unlock the page on failure.
|
2013-11-30 11:51:14 +08:00
|
|
|
*/
|
2015-04-24 05:38:15 +08:00
|
|
|
int f2fs_submit_page_bio(struct f2fs_io_info *fio)
|
2013-11-30 11:51:14 +08:00
|
|
|
{
|
|
|
|
struct bio *bio;
|
2015-05-16 07:26:10 +08:00
|
|
|
struct page *page = fio->encrypted_page ?
|
|
|
|
fio->encrypted_page : fio->page;
|
2013-11-30 11:51:14 +08:00
|
|
|
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
if (!f2fs_is_valid_blkaddr(fio->sbi, fio->new_blkaddr,
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
fio->is_por ? META_POR : (__is_meta_io(fio) ?
|
2024-03-08 14:25:25 +08:00
|
|
|
META_GENERIC : DATA_GENERIC_ENHANCE)))
|
2019-06-20 11:36:14 +08:00
|
|
|
return -EFSCORRUPTED;
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
|
2014-12-24 16:08:14 +08:00
|
|
|
trace_f2fs_submit_page_bio(page, fio);
|
2013-11-30 11:51:14 +08:00
|
|
|
|
|
|
|
/* Allocate a new bio */
|
2019-08-23 17:58:35 +08:00
|
|
|
bio = __bio_alloc(fio, 1);
|
2013-11-30 11:51:14 +08:00
|
|
|
|
2020-07-02 09:56:06 +08:00
|
|
|
f2fs_set_bio_crypt_ctx(bio, fio->page->mapping->host,
|
|
|
|
fio->page->index, fio, GFP_NOIO);
|
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
|
|
|
if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) {
|
2013-11-30 11:51:14 +08:00
|
|
|
bio_put(bio);
|
|
|
|
return -EFAULT;
|
|
|
|
}
|
2018-10-22 23:24:28 +08:00
|
|
|
|
|
|
|
if (fio->io_wbc && !is_read_io(fio->op))
|
2023-02-03 09:02:39 +08:00
|
|
|
wbc_account_cgroup_owner(fio->io_wbc, fio->page, PAGE_SIZE);
|
2018-10-22 23:24:28 +08:00
|
|
|
|
2018-10-17 01:20:53 +08:00
|
|
|
inc_page_count(fio->sbi, is_read_io(fio->op) ?
|
2024-01-13 03:41:27 +08:00
|
|
|
__read_io_type(page) : WB_DATA_TYPE(fio->page, false));
|
2018-10-22 09:12:51 +08:00
|
|
|
|
2022-11-28 17:15:12 +08:00
|
|
|
if (is_read_io(bio_op(bio)))
|
|
|
|
f2fs_submit_read_bio(fio->sbi, bio, fio->type);
|
|
|
|
else
|
|
|
|
f2fs_submit_write_bio(fio->sbi, bio, fio->type);
|
2013-11-30 11:51:14 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-07-12 16:55:41 +08:00
|
|
|
static bool page_is_mergeable(struct f2fs_sb_info *sbi, struct bio *bio,
|
|
|
|
block_t last_blkaddr, block_t cur_blkaddr)
|
|
|
|
{
|
2020-12-04 01:52:45 +08:00
|
|
|
if (unlikely(sbi->max_io_bytes &&
|
|
|
|
bio->bi_iter.bi_size >= sbi->max_io_bytes))
|
|
|
|
return false;
|
2019-07-12 16:55:41 +08:00
|
|
|
if (last_blkaddr + 1 != cur_blkaddr)
|
|
|
|
return false;
|
2021-01-24 18:02:34 +08:00
|
|
|
return bio->bi_bdev == f2fs_target_device(sbi, cur_blkaddr, NULL);
|
2019-07-12 16:55:41 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static bool io_type_is_mergeable(struct f2fs_bio_info *io,
|
|
|
|
struct f2fs_io_info *fio)
|
|
|
|
{
|
|
|
|
if (io->fio.op != fio->op)
|
|
|
|
return false;
|
|
|
|
return io->fio.op_flags == fio->op_flags;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool io_is_mergeable(struct f2fs_sb_info *sbi, struct bio *bio,
|
|
|
|
struct f2fs_bio_info *io,
|
|
|
|
struct f2fs_io_info *fio,
|
|
|
|
block_t last_blkaddr,
|
|
|
|
block_t cur_blkaddr)
|
|
|
|
{
|
|
|
|
if (!page_is_mergeable(sbi, bio, last_blkaddr, cur_blkaddr))
|
|
|
|
return false;
|
|
|
|
return io_type_is_mergeable(io, fio);
|
|
|
|
}
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
static void add_bio_entry(struct f2fs_sb_info *sbi, struct bio *bio,
|
|
|
|
struct page *page, enum temp_type temp)
|
|
|
|
{
|
|
|
|
struct f2fs_bio_info *io = sbi->write_io[DATA] + temp;
|
|
|
|
struct bio_entry *be;
|
|
|
|
|
2021-08-09 08:24:48 +08:00
|
|
|
be = f2fs_kmem_cache_alloc(bio_entry_slab, GFP_NOFS, true, NULL);
|
2019-09-30 18:53:25 +08:00
|
|
|
be->bio = bio;
|
|
|
|
bio_get(bio);
|
|
|
|
|
|
|
|
if (bio_add_page(bio, page, PAGE_SIZE, 0) != PAGE_SIZE)
|
|
|
|
f2fs_bug_on(sbi, 1);
|
|
|
|
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_write(&io->bio_list_lock);
|
2019-09-30 18:53:25 +08:00
|
|
|
list_add_tail(&be->list, &io->bio_list);
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_write(&io->bio_list_lock);
|
2019-09-30 18:53:25 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void del_bio_entry(struct bio_entry *be)
|
|
|
|
{
|
|
|
|
list_del(&be->list);
|
|
|
|
kmem_cache_free(bio_entry_slab, be);
|
|
|
|
}
|
|
|
|
|
2020-07-02 09:56:06 +08:00
|
|
|
static int add_ipu_page(struct f2fs_io_info *fio, struct bio **bio,
|
2019-09-30 18:53:25 +08:00
|
|
|
struct page *page)
|
|
|
|
{
|
2020-07-02 09:56:06 +08:00
|
|
|
struct f2fs_sb_info *sbi = fio->sbi;
|
2019-09-30 18:53:25 +08:00
|
|
|
enum temp_type temp;
|
|
|
|
bool found = false;
|
|
|
|
int ret = -EAGAIN;
|
|
|
|
|
|
|
|
for (temp = HOT; temp < NR_TEMP_TYPE && !found; temp++) {
|
|
|
|
struct f2fs_bio_info *io = sbi->write_io[DATA] + temp;
|
|
|
|
struct list_head *head = &io->bio_list;
|
|
|
|
struct bio_entry *be;
|
|
|
|
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_write(&io->bio_list_lock);
|
2019-09-30 18:53:25 +08:00
|
|
|
list_for_each_entry(be, head, list) {
|
|
|
|
if (be->bio != *bio)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
found = true;
|
|
|
|
|
2020-07-02 09:56:06 +08:00
|
|
|
f2fs_bug_on(sbi, !page_is_mergeable(sbi, *bio,
|
|
|
|
*fio->last_block,
|
|
|
|
fio->new_blkaddr));
|
|
|
|
if (f2fs_crypt_mergeable_bio(*bio,
|
|
|
|
fio->page->mapping->host,
|
|
|
|
fio->page->index, fio) &&
|
|
|
|
bio_add_page(*bio, page, PAGE_SIZE, 0) ==
|
|
|
|
PAGE_SIZE) {
|
2019-09-30 18:53:25 +08:00
|
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2020-07-02 09:56:06 +08:00
|
|
|
/* page can't be merged into bio; submit the bio */
|
2019-09-30 18:53:25 +08:00
|
|
|
del_bio_entry(be);
|
2022-11-28 17:15:12 +08:00
|
|
|
f2fs_submit_write_bio(sbi, *bio, DATA);
|
2019-09-30 18:53:25 +08:00
|
|
|
break;
|
|
|
|
}
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_write(&io->bio_list_lock);
|
2019-09-30 18:53:25 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
if (ret) {
|
|
|
|
bio_put(*bio);
|
|
|
|
*bio = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
void f2fs_submit_merged_ipu_write(struct f2fs_sb_info *sbi,
|
|
|
|
struct bio **bio, struct page *page)
|
|
|
|
{
|
|
|
|
enum temp_type temp;
|
|
|
|
bool found = false;
|
|
|
|
struct bio *target = bio ? *bio : NULL;
|
|
|
|
|
2023-04-10 10:14:02 +08:00
|
|
|
f2fs_bug_on(sbi, !target && !page);
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
for (temp = HOT; temp < NR_TEMP_TYPE && !found; temp++) {
|
|
|
|
struct f2fs_bio_info *io = sbi->write_io[DATA] + temp;
|
|
|
|
struct list_head *head = &io->bio_list;
|
|
|
|
struct bio_entry *be;
|
|
|
|
|
|
|
|
if (list_empty(head))
|
|
|
|
continue;
|
|
|
|
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_read(&io->bio_list_lock);
|
2019-09-30 18:53:25 +08:00
|
|
|
list_for_each_entry(be, head, list) {
|
|
|
|
if (target)
|
|
|
|
found = (target == be->bio);
|
|
|
|
else
|
|
|
|
found = __has_merged_page(be->bio, NULL,
|
|
|
|
page, 0);
|
|
|
|
if (found)
|
|
|
|
break;
|
|
|
|
}
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_read(&io->bio_list_lock);
|
2019-09-30 18:53:25 +08:00
|
|
|
|
|
|
|
if (!found)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
found = false;
|
|
|
|
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_write(&io->bio_list_lock);
|
2019-09-30 18:53:25 +08:00
|
|
|
list_for_each_entry(be, head, list) {
|
|
|
|
if (target)
|
|
|
|
found = (target == be->bio);
|
|
|
|
else
|
|
|
|
found = __has_merged_page(be->bio, NULL,
|
|
|
|
page, 0);
|
|
|
|
if (found) {
|
|
|
|
target = be->bio;
|
|
|
|
del_bio_entry(be);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_write(&io->bio_list_lock);
|
2019-09-30 18:53:25 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
if (found)
|
2022-11-28 17:15:12 +08:00
|
|
|
f2fs_submit_write_bio(sbi, target, DATA);
|
2019-09-30 18:53:25 +08:00
|
|
|
if (bio && *bio) {
|
|
|
|
bio_put(*bio);
|
|
|
|
*bio = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
int f2fs_merge_page_bio(struct f2fs_io_info *fio)
|
|
|
|
{
|
|
|
|
struct bio *bio = *fio->bio;
|
|
|
|
struct page *page = fio->encrypted_page ?
|
|
|
|
fio->encrypted_page : fio->page;
|
|
|
|
|
|
|
|
if (!f2fs_is_valid_blkaddr(fio->sbi, fio->new_blkaddr,
|
2024-03-08 14:25:25 +08:00
|
|
|
__is_meta_io(fio) ? META_GENERIC : DATA_GENERIC))
|
2019-06-20 11:36:14 +08:00
|
|
|
return -EFSCORRUPTED;
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
trace_f2fs_submit_page_bio(page, fio);
|
|
|
|
|
2019-07-12 16:55:41 +08:00
|
|
|
if (bio && !page_is_mergeable(fio->sbi, bio, *fio->last_block,
|
2019-09-30 18:53:25 +08:00
|
|
|
fio->new_blkaddr))
|
|
|
|
f2fs_submit_merged_ipu_write(fio->sbi, &bio, NULL);
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
alloc_new:
|
|
|
|
if (!bio) {
|
2021-03-11 19:01:37 +08:00
|
|
|
bio = __bio_alloc(fio, BIO_MAX_VECS);
|
2020-07-02 09:56:06 +08:00
|
|
|
f2fs_set_bio_crypt_ctx(bio, fio->page->mapping->host,
|
|
|
|
fio->page->index, fio, GFP_NOIO);
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
add_bio_entry(fio->sbi, bio, page, fio->temp);
|
|
|
|
} else {
|
2020-07-02 09:56:06 +08:00
|
|
|
if (add_ipu_page(fio, &bio, page))
|
2019-09-30 18:53:25 +08:00
|
|
|
goto alloc_new;
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
if (fio->io_wbc)
|
2023-02-03 09:02:39 +08:00
|
|
|
wbc_account_cgroup_owner(fio->io_wbc, fio->page, PAGE_SIZE);
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
2024-01-13 03:41:27 +08:00
|
|
|
inc_page_count(fio->sbi, WB_DATA_TYPE(page, false));
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
|
|
|
|
*fio->last_block = fio->new_blkaddr;
|
|
|
|
*fio->bio = bio;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2023-05-04 04:53:49 +08:00
|
|
|
#ifdef CONFIG_BLK_DEV_ZONED
|
|
|
|
static bool is_end_zone_blkaddr(struct f2fs_sb_info *sbi, block_t blkaddr)
|
|
|
|
{
|
2024-07-04 09:01:21 +08:00
|
|
|
struct block_device *bdev = sbi->sb->s_bdev;
|
2023-05-04 04:53:49 +08:00
|
|
|
int devi = 0;
|
|
|
|
|
|
|
|
if (f2fs_is_multi_device(sbi)) {
|
|
|
|
devi = f2fs_target_device_index(sbi, blkaddr);
|
|
|
|
if (blkaddr < FDEV(devi).start_blk ||
|
|
|
|
blkaddr > FDEV(devi).end_blk) {
|
|
|
|
f2fs_err(sbi, "Invalid block %x", blkaddr);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
blkaddr -= FDEV(devi).start_blk;
|
2024-07-04 09:01:21 +08:00
|
|
|
bdev = FDEV(devi).bdev;
|
2023-05-04 04:53:49 +08:00
|
|
|
}
|
2024-07-04 09:01:21 +08:00
|
|
|
return bdev_is_zoned(bdev) &&
|
2023-05-04 04:53:49 +08:00
|
|
|
f2fs_blkz_is_seq(sbi, devi, blkaddr) &&
|
|
|
|
(blkaddr % sbi->blocks_per_blkz == sbi->blocks_per_blkz - 1);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2018-05-28 23:47:18 +08:00
|
|
|
void f2fs_submit_page_write(struct f2fs_io_info *fio)
|
2013-11-30 11:51:14 +08:00
|
|
|
{
|
2015-04-24 05:38:15 +08:00
|
|
|
struct f2fs_sb_info *sbi = fio->sbi;
|
2013-12-11 12:54:01 +08:00
|
|
|
enum page_type btype = PAGE_TYPE_OF_BIO(fio->type);
|
2017-05-11 02:18:25 +08:00
|
|
|
struct f2fs_bio_info *io = sbi->write_io[btype] + fio->temp;
|
2015-04-24 03:04:33 +08:00
|
|
|
struct page *bio_page;
|
2024-01-13 03:41:27 +08:00
|
|
|
enum count_type type;
|
2013-11-30 11:51:14 +08:00
|
|
|
|
2017-05-11 02:28:38 +08:00
|
|
|
f2fs_bug_on(sbi, is_read_io(fio->op));
|
2013-11-30 11:51:14 +08:00
|
|
|
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_write(&io->io_rwsem);
|
2024-01-29 19:27:40 +08:00
|
|
|
next:
|
2023-05-04 04:53:49 +08:00
|
|
|
#ifdef CONFIG_BLK_DEV_ZONED
|
|
|
|
if (f2fs_sb_has_blkzoned(sbi) && btype < META && io->zone_pending_bio) {
|
|
|
|
wait_for_completion_io(&io->zone_wait);
|
|
|
|
bio_put(io->zone_pending_bio);
|
|
|
|
io->zone_pending_bio = NULL;
|
|
|
|
io->bi_private = NULL;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2017-05-19 23:37:01 +08:00
|
|
|
if (fio->in_list) {
|
|
|
|
spin_lock(&io->io_lock);
|
|
|
|
if (list_empty(&io->io_list)) {
|
|
|
|
spin_unlock(&io->io_lock);
|
2018-05-28 23:47:18 +08:00
|
|
|
goto out;
|
2017-05-19 23:37:01 +08:00
|
|
|
}
|
|
|
|
fio = list_first_entry(&io->io_list,
|
|
|
|
struct f2fs_io_info, list);
|
|
|
|
list_del(&fio->list);
|
|
|
|
spin_unlock(&io->io_lock);
|
|
|
|
}
|
2013-11-30 11:51:14 +08:00
|
|
|
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
verify_fio_blkaddr(fio);
|
2013-11-30 11:51:14 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (fio->encrypted_page)
|
|
|
|
bio_page = fio->encrypted_page;
|
|
|
|
else if (fio->compressed_page)
|
|
|
|
bio_page = fio->compressed_page;
|
|
|
|
else
|
|
|
|
bio_page = fio->page;
|
f2fs: don't wait writeback for datas during checkpoint
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-16 10:41:20 +08:00
|
|
|
|
2017-10-07 22:02:21 +08:00
|
|
|
/* set submitted = true as a return value */
|
2023-02-02 15:04:56 +08:00
|
|
|
fio->submitted = 1;
|
2017-02-04 09:44:04 +08:00
|
|
|
|
2024-01-13 03:41:27 +08:00
|
|
|
type = WB_DATA_TYPE(bio_page, fio->compressed_page);
|
|
|
|
inc_page_count(sbi, type);
|
2013-11-30 11:51:14 +08:00
|
|
|
|
2020-07-02 09:56:06 +08:00
|
|
|
if (io->bio &&
|
|
|
|
(!io_is_mergeable(sbi, io->bio, io, fio, io->last_block_in_bio,
|
|
|
|
fio->new_blkaddr) ||
|
|
|
|
!f2fs_crypt_mergeable_bio(io->bio, fio->page->mapping->host,
|
|
|
|
bio_page->index, fio)))
|
2013-12-11 12:54:01 +08:00
|
|
|
__submit_merged_bio(io);
|
2013-11-30 11:51:14 +08:00
|
|
|
alloc_new:
|
|
|
|
if (io->bio == NULL) {
|
2021-03-11 19:01:37 +08:00
|
|
|
io->bio = __bio_alloc(fio, BIO_MAX_VECS);
|
2020-07-02 09:56:06 +08:00
|
|
|
f2fs_set_bio_crypt_ctx(io->bio, fio->page->mapping->host,
|
|
|
|
bio_page->index, fio, GFP_NOIO);
|
2013-12-11 12:54:01 +08:00
|
|
|
io->fio = *fio;
|
2013-11-30 11:51:14 +08:00
|
|
|
}
|
|
|
|
|
2017-05-11 02:18:25 +08:00
|
|
|
if (bio_add_page(io->bio, bio_page, PAGE_SIZE, 0) < PAGE_SIZE) {
|
2013-12-11 12:54:01 +08:00
|
|
|
__submit_merged_bio(io);
|
2013-11-30 11:51:14 +08:00
|
|
|
goto alloc_new;
|
|
|
|
}
|
|
|
|
|
2018-01-09 19:33:39 +08:00
|
|
|
if (fio->io_wbc)
|
2023-02-03 09:02:39 +08:00
|
|
|
wbc_account_cgroup_owner(fio->io_wbc, fio->page, PAGE_SIZE);
|
2018-01-09 19:33:39 +08:00
|
|
|
|
f2fs: trace old block address for CoWed page
This patch enables to trace old block address of CoWed page for better
debugging.
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f0, oldaddr = 0xfe8ab, newaddr = 0xfee90 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f8, oldaddr = 0xfe8b0, newaddr = 0xfee91 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4fa, oldaddr = 0xfe8ae, newaddr = 0xfee92 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x96, oldaddr = 0xf049b, newaddr = 0x2bbe rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x97, oldaddr = 0xf049c, newaddr = 0x2bbf rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x98, oldaddr = 0xf049d, newaddr = 0x2bc0 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x47, oldaddr = 0xffffffff, newaddr = 0xf2631 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x48, oldaddr = 0xffffffff, newaddr = 0xf2632 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x49, oldaddr = 0xffffffff, newaddr = 0xf2633 rw = WRITE, type = DATA
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-22 18:36:38 +08:00
|
|
|
io->last_block_in_bio = fio->new_blkaddr;
|
2017-05-19 23:37:01 +08:00
|
|
|
|
|
|
|
trace_f2fs_submit_page_write(fio->page, fio);
|
2023-05-04 04:53:49 +08:00
|
|
|
#ifdef CONFIG_BLK_DEV_ZONED
|
|
|
|
if (f2fs_sb_has_blkzoned(sbi) && btype < META &&
|
|
|
|
is_end_zone_blkaddr(sbi, fio->new_blkaddr)) {
|
|
|
|
bio_get(io->bio);
|
|
|
|
reinit_completion(&io->zone_wait);
|
|
|
|
io->bi_private = io->bio->bi_private;
|
|
|
|
io->bio->bi_private = io;
|
|
|
|
io->bio->bi_end_io = f2fs_zone_write_end_io;
|
|
|
|
io->zone_pending_bio = io->bio;
|
|
|
|
__submit_merged_bio(io);
|
|
|
|
}
|
|
|
|
#endif
|
2024-01-16 22:11:38 +08:00
|
|
|
if (fio->in_list)
|
|
|
|
goto next;
|
|
|
|
out:
|
2018-08-21 10:21:43 +08:00
|
|
|
if (is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN) ||
|
2019-08-23 17:58:36 +08:00
|
|
|
!f2fs_is_checkpoint_ready(sbi))
|
2018-09-07 02:40:12 +08:00
|
|
|
__submit_merged_bio(io);
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_write(&io->io_rwsem);
|
2013-11-30 11:51:14 +08:00
|
|
|
}
|
|
|
|
|
2017-09-07 12:04:44 +08:00
|
|
|
static struct bio *f2fs_grab_read_bio(struct inode *inode, block_t blkaddr,
|
2022-07-15 02:07:18 +08:00
|
|
|
unsigned nr_pages, blk_opf_t op_flag,
|
2021-01-05 14:33:02 +08:00
|
|
|
pgoff_t first_idx, bool for_write)
|
2017-09-07 12:04:44 +08:00
|
|
|
{
|
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
|
|
|
struct bio *bio;
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
struct bio_post_read_ctx *ctx = NULL;
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
unsigned int post_read_steps = 0;
|
2022-02-28 20:41:22 +08:00
|
|
|
sector_t sector;
|
|
|
|
struct block_device *bdev = f2fs_target_device(sbi, blkaddr, §or);
|
2017-09-07 12:04:44 +08:00
|
|
|
|
2022-02-28 20:41:23 +08:00
|
|
|
bio = bio_alloc_bioset(bdev, bio_max_segs(nr_pages),
|
|
|
|
REQ_OP_READ | op_flag,
|
2022-01-24 17:11:03 +08:00
|
|
|
for_write ? GFP_NOIO : GFP_KERNEL, &f2fs_bioset);
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
if (!bio)
|
2017-09-07 12:04:44 +08:00
|
|
|
return ERR_PTR(-ENOMEM);
|
2022-02-28 20:41:22 +08:00
|
|
|
bio->bi_iter.bi_sector = sector;
|
2020-07-02 09:56:06 +08:00
|
|
|
f2fs_set_bio_crypt_ctx(bio, inode, first_idx, NULL, GFP_NOFS);
|
2017-09-07 12:04:44 +08:00
|
|
|
bio->bi_end_io = f2fs_read_end_io;
|
|
|
|
|
2020-07-02 09:56:06 +08:00
|
|
|
if (fscrypt_inode_uses_fs_layer_crypto(inode))
|
2021-01-05 14:33:02 +08:00
|
|
|
post_read_steps |= STEP_DECRYPT;
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
|
|
|
|
2021-01-05 14:33:02 +08:00
|
|
|
if (f2fs_need_verity(inode, first_idx))
|
|
|
|
post_read_steps |= STEP_VERITY;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* STEP_DECOMPRESS is handled specially, since a compressed file might
|
|
|
|
* contain both compressed and uncompressed clusters. We'll allocate a
|
|
|
|
* bio_post_read_ctx if the file is compressed, but the caller is
|
|
|
|
* responsible for enabling STEP_DECOMPRESS if it's actually needed.
|
|
|
|
*/
|
|
|
|
|
|
|
|
if (post_read_steps || f2fs_compressed_file(inode)) {
|
2020-01-01 02:14:56 +08:00
|
|
|
/* Due to the mempool, this never fails. */
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
ctx = mempool_alloc(bio_post_read_ctx_pool, GFP_NOFS);
|
|
|
|
ctx->bio = bio;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
ctx->sbi = sbi;
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
ctx->enabled_steps = post_read_steps;
|
2021-07-29 03:38:11 +08:00
|
|
|
ctx->fs_blkaddr = blkaddr;
|
2022-11-29 15:04:01 +08:00
|
|
|
ctx->decompression_attempted = false;
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
bio->bi_private = ctx;
|
|
|
|
}
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
iostat_alloc_and_bind_ctx(sbi, bio, ctx);
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
|
2017-09-07 12:04:44 +08:00
|
|
|
return bio;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* This can handle encryption stuffs */
|
|
|
|
static int f2fs_submit_page_read(struct inode *inode, struct page *page,
|
2022-07-15 02:07:18 +08:00
|
|
|
block_t blkaddr, blk_opf_t op_flags,
|
|
|
|
bool for_write)
|
2017-09-07 12:04:44 +08:00
|
|
|
{
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
|
|
|
struct bio *bio;
|
2017-09-07 12:04:44 +08:00
|
|
|
|
2020-07-01 10:27:40 +08:00
|
|
|
bio = f2fs_grab_read_bio(inode, blkaddr, 1, op_flags,
|
2021-01-05 14:33:02 +08:00
|
|
|
page->index, for_write);
|
2017-09-07 12:04:44 +08:00
|
|
|
if (IS_ERR(bio))
|
|
|
|
return PTR_ERR(bio);
|
|
|
|
|
2018-08-23 12:18:00 +08:00
|
|
|
/* wait for GCed page writeback via META_MAPPING */
|
|
|
|
f2fs_wait_on_block_writeback(inode, blkaddr);
|
|
|
|
|
2017-09-07 12:04:44 +08:00
|
|
|
if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) {
|
2023-08-21 23:22:24 +08:00
|
|
|
iostat_update_and_unbind_ctx(bio);
|
|
|
|
if (bio->bi_private)
|
|
|
|
mempool_free(bio->bi_private, bio_post_read_ctx_pool);
|
2017-09-07 12:04:44 +08:00
|
|
|
bio_put(bio);
|
|
|
|
return -EFAULT;
|
|
|
|
}
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
inc_page_count(sbi, F2FS_RD_DATA);
|
2022-08-20 11:04:41 +08:00
|
|
|
f2fs_update_iostat(sbi, NULL, FS_DATA_READ_IO, F2FS_BLKSIZE);
|
2022-11-28 17:15:12 +08:00
|
|
|
f2fs_submit_read_bio(sbi, bio, DATA);
|
2017-09-07 12:04:44 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2023-12-10 17:20:38 +08:00
|
|
|
static void __set_data_blkaddr(struct dnode_of_data *dn, block_t blkaddr)
|
2016-05-09 19:56:30 +08:00
|
|
|
{
|
2023-12-10 17:20:37 +08:00
|
|
|
__le32 *addr = get_dnode_addr(dn->inode, dn->node_page);
|
2017-07-19 00:19:06 +08:00
|
|
|
|
2023-12-10 17:20:38 +08:00
|
|
|
dn->data_blkaddr = blkaddr;
|
2023-12-10 17:20:37 +08:00
|
|
|
addr[dn->ofs_in_node] = cpu_to_le32(dn->data_blkaddr);
|
2016-05-09 19:56:30 +08:00
|
|
|
}
|
|
|
|
|
2012-11-29 12:28:09 +08:00
|
|
|
/*
|
2012-11-02 16:10:12 +08:00
|
|
|
* Lock ordering for the change of data block address:
|
|
|
|
* ->data_page
|
|
|
|
* ->node_page
|
|
|
|
* update block addresses in the node page
|
|
|
|
*/
|
2023-12-10 17:20:38 +08:00
|
|
|
void f2fs_set_data_blkaddr(struct dnode_of_data *dn, block_t blkaddr)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
2018-12-25 17:43:42 +08:00
|
|
|
f2fs_wait_on_page_writeback(dn->node_page, NODE, true, true);
|
2023-12-10 17:20:38 +08:00
|
|
|
__set_data_blkaddr(dn, blkaddr);
|
2016-05-09 19:56:30 +08:00
|
|
|
if (set_page_dirty(dn->node_page))
|
2016-01-08 05:23:12 +08:00
|
|
|
dn->node_changed = true;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
|
|
|
|
2016-02-24 17:16:47 +08:00
|
|
|
void f2fs_update_data_blkaddr(struct dnode_of_data *dn, block_t blkaddr)
|
|
|
|
{
|
2023-12-10 17:20:38 +08:00
|
|
|
f2fs_set_data_blkaddr(dn, blkaddr);
|
2022-12-01 01:26:29 +08:00
|
|
|
f2fs_update_read_extent_cache(dn);
|
2016-02-24 17:16:47 +08:00
|
|
|
}
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
/* dn->ofs_in_node will be returned with up-to-date last block pointer */
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
int f2fs_reserve_new_blocks(struct dnode_of_data *dn, blkcnt_t count)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
2014-09-03 06:31:18 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
|
2017-07-09 00:13:07 +08:00
|
|
|
int err;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
if (!count)
|
|
|
|
return 0;
|
|
|
|
|
2016-05-21 01:13:22 +08:00
|
|
|
if (unlikely(is_inode_flag_set(dn->inode, FI_NO_ALLOC)))
|
2012-11-02 16:10:12 +08:00
|
|
|
return -EPERM;
|
2024-01-13 03:41:30 +08:00
|
|
|
err = inc_valid_block_count(sbi, dn->inode, &count, true);
|
|
|
|
if (unlikely(err))
|
2017-07-09 00:13:07 +08:00
|
|
|
return err;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
trace_f2fs_reserve_new_blocks(dn->inode, dn->nid,
|
|
|
|
dn->ofs_in_node, count);
|
|
|
|
|
2018-12-25 17:43:42 +08:00
|
|
|
f2fs_wait_on_page_writeback(dn->node_page, NODE, true, true);
|
2016-05-09 19:56:30 +08:00
|
|
|
|
|
|
|
for (; count > 0; dn->ofs_in_node++) {
|
2020-02-14 17:44:10 +08:00
|
|
|
block_t blkaddr = f2fs_data_blkaddr(dn);
|
2021-04-06 09:47:35 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
if (blkaddr == NULL_ADDR) {
|
2023-12-10 17:20:38 +08:00
|
|
|
__set_data_blkaddr(dn, NEW_ADDR);
|
2016-05-09 19:56:30 +08:00
|
|
|
count--;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (set_page_dirty(dn->node_page))
|
|
|
|
dn->node_changed = true;
|
2012-11-02 16:10:12 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
/* Should keep dn->ofs_in_node unchanged */
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
int f2fs_reserve_new_block(struct dnode_of_data *dn)
|
2016-05-09 19:56:30 +08:00
|
|
|
{
|
|
|
|
unsigned int ofs_in_node = dn->ofs_in_node;
|
|
|
|
int ret;
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
ret = f2fs_reserve_new_blocks(dn, 1);
|
2016-05-09 19:56:30 +08:00
|
|
|
dn->ofs_in_node = ofs_in_node;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2013-11-10 23:13:18 +08:00
|
|
|
int f2fs_reserve_block(struct dnode_of_data *dn, pgoff_t index)
|
|
|
|
{
|
|
|
|
bool need_put = dn->inode_page ? false : true;
|
|
|
|
int err;
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
err = f2fs_get_dnode_of_data(dn, index, ALLOC_NODE);
|
2013-11-10 23:13:18 +08:00
|
|
|
if (err)
|
|
|
|
return err;
|
2013-12-27 16:04:17 +08:00
|
|
|
|
2013-11-10 23:13:18 +08:00
|
|
|
if (dn->data_blkaddr == NULL_ADDR)
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
err = f2fs_reserve_new_block(dn);
|
2013-12-27 16:04:17 +08:00
|
|
|
if (err || need_put)
|
2013-11-10 23:13:18 +08:00
|
|
|
f2fs_put_dnode(dn);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
struct page *f2fs_get_read_data_page(struct inode *inode, pgoff_t index,
|
f2fs: optimize iteration over sparse directories
Wei Chen reports a kernel bug as blew:
INFO: task syz-executor.0:29056 blocked for more than 143 seconds.
Not tainted 5.15.0-rc5 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0 state:D stack:14632 pid:29056 ppid: 6574 flags:0x00000004
Call Trace:
__schedule+0x4a1/0x1720
schedule+0x36/0xe0
rwsem_down_write_slowpath+0x322/0x7a0
fscrypt_ioctl_set_policy+0x11f/0x2a0
__f2fs_ioctl+0x1a9f/0x5780
f2fs_ioctl+0x89/0x3a0
__x64_sys_ioctl+0xe8/0x140
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Eric did some investigation on this issue, quoted from reply of Eric:
"Well, the quality of this bug report has a lot to be desired (not on
upstream kernel, reproducer is full of totally irrelevant stuff, not
sent to the mailing list of the filesystem whose disk image is being
fuzzed, etc.). But what is going on is that f2fs_empty_dir() doesn't
consider the case of a directory with an extremely large i_size on a
malicious disk image.
Specifically, the reproducer mounts an f2fs image with a directory
that has an i_size of 14814520042850357248, then calls
FS_IOC_SET_ENCRYPTION_POLICY on it.
That results in a call to f2fs_empty_dir() to check whether the
directory is empty. f2fs_empty_dir() then iterates through all
3616826182336513 blocks the directory allegedly contains to check
whether any contain anything. i_rwsem is held during this, so
anything else that tries to take it will hang."
In order to solve this issue, let's use f2fs_get_next_page_offset()
to speed up iteration by skipping holes for all below functions:
- f2fs_empty_dir
- f2fs_readdir
- find_in_level
The way why we can speed up iteration was described in
'commit 3cf4574705b4 ("f2fs: introduce get_next_page_offset to speed
up SEEK_DATA")'.
Meanwhile, in f2fs_empty_dir(), let's use f2fs_find_data_page()
instead f2fs_get_lock_data_page(), due to i_rwsem was held in
caller of f2fs_empty_dir(), there shouldn't be any races, so it's
fine to not lock dentry page during lookuping dirents in the page.
Link: https://lore.kernel.org/lkml/536944df-a0ae-1dd8-148f-510b476e1347@kernel.org/T/
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-11-08 22:33:21 +08:00
|
|
|
blk_opf_t op_flags, bool for_write,
|
|
|
|
pgoff_t *next_pgofs)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
|
|
|
struct address_space *mapping = inode->i_mapping;
|
|
|
|
struct dnode_of_data dn;
|
|
|
|
struct page *page;
|
|
|
|
int err;
|
2015-04-24 03:04:33 +08:00
|
|
|
|
2015-10-10 06:11:38 +08:00
|
|
|
page = f2fs_grab_cache_page(mapping, index, for_write);
|
2013-05-13 07:38:35 +08:00
|
|
|
if (!page)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
2022-11-28 17:15:14 +08:00
|
|
|
if (f2fs_lookup_read_extent_cache_block(inode, index,
|
|
|
|
&dn.data_blkaddr)) {
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
if (!f2fs_is_valid_blkaddr(F2FS_I_SB(inode), dn.data_blkaddr,
|
|
|
|
DATA_GENERIC_ENHANCE_READ)) {
|
2019-06-20 11:36:14 +08:00
|
|
|
err = -EFSCORRUPTED;
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
goto put_err;
|
|
|
|
}
|
2015-02-05 18:03:40 +08:00
|
|
|
goto got_it;
|
|
|
|
}
|
|
|
|
|
2012-11-02 16:10:12 +08:00
|
|
|
set_new_dnode(&dn, inode, NULL, NULL, 0);
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
err = f2fs_get_dnode_of_data(&dn, index, LOOKUP_NODE);
|
f2fs: optimize iteration over sparse directories
Wei Chen reports a kernel bug as blew:
INFO: task syz-executor.0:29056 blocked for more than 143 seconds.
Not tainted 5.15.0-rc5 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0 state:D stack:14632 pid:29056 ppid: 6574 flags:0x00000004
Call Trace:
__schedule+0x4a1/0x1720
schedule+0x36/0xe0
rwsem_down_write_slowpath+0x322/0x7a0
fscrypt_ioctl_set_policy+0x11f/0x2a0
__f2fs_ioctl+0x1a9f/0x5780
f2fs_ioctl+0x89/0x3a0
__x64_sys_ioctl+0xe8/0x140
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Eric did some investigation on this issue, quoted from reply of Eric:
"Well, the quality of this bug report has a lot to be desired (not on
upstream kernel, reproducer is full of totally irrelevant stuff, not
sent to the mailing list of the filesystem whose disk image is being
fuzzed, etc.). But what is going on is that f2fs_empty_dir() doesn't
consider the case of a directory with an extremely large i_size on a
malicious disk image.
Specifically, the reproducer mounts an f2fs image with a directory
that has an i_size of 14814520042850357248, then calls
FS_IOC_SET_ENCRYPTION_POLICY on it.
That results in a call to f2fs_empty_dir() to check whether the
directory is empty. f2fs_empty_dir() then iterates through all
3616826182336513 blocks the directory allegedly contains to check
whether any contain anything. i_rwsem is held during this, so
anything else that tries to take it will hang."
In order to solve this issue, let's use f2fs_get_next_page_offset()
to speed up iteration by skipping holes for all below functions:
- f2fs_empty_dir
- f2fs_readdir
- find_in_level
The way why we can speed up iteration was described in
'commit 3cf4574705b4 ("f2fs: introduce get_next_page_offset to speed
up SEEK_DATA")'.
Meanwhile, in f2fs_empty_dir(), let's use f2fs_find_data_page()
instead f2fs_get_lock_data_page(), due to i_rwsem was held in
caller of f2fs_empty_dir(), there shouldn't be any races, so it's
fine to not lock dentry page during lookuping dirents in the page.
Link: https://lore.kernel.org/lkml/536944df-a0ae-1dd8-148f-510b476e1347@kernel.org/T/
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-11-08 22:33:21 +08:00
|
|
|
if (err) {
|
|
|
|
if (err == -ENOENT && next_pgofs)
|
|
|
|
*next_pgofs = f2fs_get_next_page_offset(&dn, index);
|
2015-07-16 04:08:21 +08:00
|
|
|
goto put_err;
|
f2fs: optimize iteration over sparse directories
Wei Chen reports a kernel bug as blew:
INFO: task syz-executor.0:29056 blocked for more than 143 seconds.
Not tainted 5.15.0-rc5 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0 state:D stack:14632 pid:29056 ppid: 6574 flags:0x00000004
Call Trace:
__schedule+0x4a1/0x1720
schedule+0x36/0xe0
rwsem_down_write_slowpath+0x322/0x7a0
fscrypt_ioctl_set_policy+0x11f/0x2a0
__f2fs_ioctl+0x1a9f/0x5780
f2fs_ioctl+0x89/0x3a0
__x64_sys_ioctl+0xe8/0x140
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Eric did some investigation on this issue, quoted from reply of Eric:
"Well, the quality of this bug report has a lot to be desired (not on
upstream kernel, reproducer is full of totally irrelevant stuff, not
sent to the mailing list of the filesystem whose disk image is being
fuzzed, etc.). But what is going on is that f2fs_empty_dir() doesn't
consider the case of a directory with an extremely large i_size on a
malicious disk image.
Specifically, the reproducer mounts an f2fs image with a directory
that has an i_size of 14814520042850357248, then calls
FS_IOC_SET_ENCRYPTION_POLICY on it.
That results in a call to f2fs_empty_dir() to check whether the
directory is empty. f2fs_empty_dir() then iterates through all
3616826182336513 blocks the directory allegedly contains to check
whether any contain anything. i_rwsem is held during this, so
anything else that tries to take it will hang."
In order to solve this issue, let's use f2fs_get_next_page_offset()
to speed up iteration by skipping holes for all below functions:
- f2fs_empty_dir
- f2fs_readdir
- find_in_level
The way why we can speed up iteration was described in
'commit 3cf4574705b4 ("f2fs: introduce get_next_page_offset to speed
up SEEK_DATA")'.
Meanwhile, in f2fs_empty_dir(), let's use f2fs_find_data_page()
instead f2fs_get_lock_data_page(), due to i_rwsem was held in
caller of f2fs_empty_dir(), there shouldn't be any races, so it's
fine to not lock dentry page during lookuping dirents in the page.
Link: https://lore.kernel.org/lkml/536944df-a0ae-1dd8-148f-510b476e1347@kernel.org/T/
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-11-08 22:33:21 +08:00
|
|
|
}
|
2012-11-02 16:10:12 +08:00
|
|
|
f2fs_put_dnode(&dn);
|
|
|
|
|
2013-12-06 14:00:58 +08:00
|
|
|
if (unlikely(dn.data_blkaddr == NULL_ADDR)) {
|
2015-07-16 04:08:21 +08:00
|
|
|
err = -ENOENT;
|
f2fs: optimize iteration over sparse directories
Wei Chen reports a kernel bug as blew:
INFO: task syz-executor.0:29056 blocked for more than 143 seconds.
Not tainted 5.15.0-rc5 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0 state:D stack:14632 pid:29056 ppid: 6574 flags:0x00000004
Call Trace:
__schedule+0x4a1/0x1720
schedule+0x36/0xe0
rwsem_down_write_slowpath+0x322/0x7a0
fscrypt_ioctl_set_policy+0x11f/0x2a0
__f2fs_ioctl+0x1a9f/0x5780
f2fs_ioctl+0x89/0x3a0
__x64_sys_ioctl+0xe8/0x140
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Eric did some investigation on this issue, quoted from reply of Eric:
"Well, the quality of this bug report has a lot to be desired (not on
upstream kernel, reproducer is full of totally irrelevant stuff, not
sent to the mailing list of the filesystem whose disk image is being
fuzzed, etc.). But what is going on is that f2fs_empty_dir() doesn't
consider the case of a directory with an extremely large i_size on a
malicious disk image.
Specifically, the reproducer mounts an f2fs image with a directory
that has an i_size of 14814520042850357248, then calls
FS_IOC_SET_ENCRYPTION_POLICY on it.
That results in a call to f2fs_empty_dir() to check whether the
directory is empty. f2fs_empty_dir() then iterates through all
3616826182336513 blocks the directory allegedly contains to check
whether any contain anything. i_rwsem is held during this, so
anything else that tries to take it will hang."
In order to solve this issue, let's use f2fs_get_next_page_offset()
to speed up iteration by skipping holes for all below functions:
- f2fs_empty_dir
- f2fs_readdir
- find_in_level
The way why we can speed up iteration was described in
'commit 3cf4574705b4 ("f2fs: introduce get_next_page_offset to speed
up SEEK_DATA")'.
Meanwhile, in f2fs_empty_dir(), let's use f2fs_find_data_page()
instead f2fs_get_lock_data_page(), due to i_rwsem was held in
caller of f2fs_empty_dir(), there shouldn't be any races, so it's
fine to not lock dentry page during lookuping dirents in the page.
Link: https://lore.kernel.org/lkml/536944df-a0ae-1dd8-148f-510b476e1347@kernel.org/T/
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-11-08 22:33:21 +08:00
|
|
|
if (next_pgofs)
|
|
|
|
*next_pgofs = index + 1;
|
2015-07-16 04:08:21 +08:00
|
|
|
goto put_err;
|
2013-05-13 07:38:35 +08:00
|
|
|
}
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
if (dn.data_blkaddr != NEW_ADDR &&
|
|
|
|
!f2fs_is_valid_blkaddr(F2FS_I_SB(inode),
|
|
|
|
dn.data_blkaddr,
|
|
|
|
DATA_GENERIC_ENHANCE)) {
|
2019-06-20 11:36:14 +08:00
|
|
|
err = -EFSCORRUPTED;
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
goto put_err;
|
|
|
|
}
|
2015-02-05 18:03:40 +08:00
|
|
|
got_it:
|
2015-05-01 08:00:33 +08:00
|
|
|
if (PageUptodate(page)) {
|
|
|
|
unlock_page(page);
|
2012-11-02 16:10:12 +08:00
|
|
|
return page;
|
2015-05-01 08:00:33 +08:00
|
|
|
}
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2013-08-20 18:13:07 +08:00
|
|
|
/*
|
|
|
|
* A new dentry page is allocated but not able to be written, since its
|
|
|
|
* new inode page couldn't be allocated due to -ENOSPC.
|
|
|
|
* In such the case, its blkaddr can be remained as NEW_ADDR.
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
* see, f2fs_add_link -> f2fs_get_new_data_page ->
|
|
|
|
* f2fs_init_inode_metadata.
|
2013-08-20 18:13:07 +08:00
|
|
|
*/
|
|
|
|
if (dn.data_blkaddr == NEW_ADDR) {
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
|
|
|
zero_user_segment(page, 0, PAGE_SIZE);
|
2016-07-01 09:49:15 +08:00
|
|
|
if (!PageUptodate(page))
|
|
|
|
SetPageUptodate(page);
|
2015-05-01 08:00:33 +08:00
|
|
|
unlock_page(page);
|
2013-08-20 18:13:07 +08:00
|
|
|
return page;
|
|
|
|
}
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2020-07-01 10:27:40 +08:00
|
|
|
err = f2fs_submit_page_read(inode, page, dn.data_blkaddr,
|
|
|
|
op_flags, for_write);
|
2013-03-08 20:29:23 +08:00
|
|
|
if (err)
|
2015-07-16 04:08:21 +08:00
|
|
|
goto put_err;
|
2015-05-01 08:00:33 +08:00
|
|
|
return page;
|
2015-07-16 04:08:21 +08:00
|
|
|
|
|
|
|
put_err:
|
|
|
|
f2fs_put_page(page, 1);
|
|
|
|
return ERR_PTR(err);
|
2015-05-01 08:00:33 +08:00
|
|
|
}
|
|
|
|
|
f2fs: optimize iteration over sparse directories
Wei Chen reports a kernel bug as blew:
INFO: task syz-executor.0:29056 blocked for more than 143 seconds.
Not tainted 5.15.0-rc5 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0 state:D stack:14632 pid:29056 ppid: 6574 flags:0x00000004
Call Trace:
__schedule+0x4a1/0x1720
schedule+0x36/0xe0
rwsem_down_write_slowpath+0x322/0x7a0
fscrypt_ioctl_set_policy+0x11f/0x2a0
__f2fs_ioctl+0x1a9f/0x5780
f2fs_ioctl+0x89/0x3a0
__x64_sys_ioctl+0xe8/0x140
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Eric did some investigation on this issue, quoted from reply of Eric:
"Well, the quality of this bug report has a lot to be desired (not on
upstream kernel, reproducer is full of totally irrelevant stuff, not
sent to the mailing list of the filesystem whose disk image is being
fuzzed, etc.). But what is going on is that f2fs_empty_dir() doesn't
consider the case of a directory with an extremely large i_size on a
malicious disk image.
Specifically, the reproducer mounts an f2fs image with a directory
that has an i_size of 14814520042850357248, then calls
FS_IOC_SET_ENCRYPTION_POLICY on it.
That results in a call to f2fs_empty_dir() to check whether the
directory is empty. f2fs_empty_dir() then iterates through all
3616826182336513 blocks the directory allegedly contains to check
whether any contain anything. i_rwsem is held during this, so
anything else that tries to take it will hang."
In order to solve this issue, let's use f2fs_get_next_page_offset()
to speed up iteration by skipping holes for all below functions:
- f2fs_empty_dir
- f2fs_readdir
- find_in_level
The way why we can speed up iteration was described in
'commit 3cf4574705b4 ("f2fs: introduce get_next_page_offset to speed
up SEEK_DATA")'.
Meanwhile, in f2fs_empty_dir(), let's use f2fs_find_data_page()
instead f2fs_get_lock_data_page(), due to i_rwsem was held in
caller of f2fs_empty_dir(), there shouldn't be any races, so it's
fine to not lock dentry page during lookuping dirents in the page.
Link: https://lore.kernel.org/lkml/536944df-a0ae-1dd8-148f-510b476e1347@kernel.org/T/
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-11-08 22:33:21 +08:00
|
|
|
struct page *f2fs_find_data_page(struct inode *inode, pgoff_t index,
|
|
|
|
pgoff_t *next_pgofs)
|
2015-05-01 08:00:33 +08:00
|
|
|
{
|
|
|
|
struct address_space *mapping = inode->i_mapping;
|
|
|
|
struct page *page;
|
|
|
|
|
|
|
|
page = find_get_page(mapping, index);
|
|
|
|
if (page && PageUptodate(page))
|
|
|
|
return page;
|
|
|
|
f2fs_put_page(page, 0);
|
|
|
|
|
f2fs: optimize iteration over sparse directories
Wei Chen reports a kernel bug as blew:
INFO: task syz-executor.0:29056 blocked for more than 143 seconds.
Not tainted 5.15.0-rc5 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0 state:D stack:14632 pid:29056 ppid: 6574 flags:0x00000004
Call Trace:
__schedule+0x4a1/0x1720
schedule+0x36/0xe0
rwsem_down_write_slowpath+0x322/0x7a0
fscrypt_ioctl_set_policy+0x11f/0x2a0
__f2fs_ioctl+0x1a9f/0x5780
f2fs_ioctl+0x89/0x3a0
__x64_sys_ioctl+0xe8/0x140
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Eric did some investigation on this issue, quoted from reply of Eric:
"Well, the quality of this bug report has a lot to be desired (not on
upstream kernel, reproducer is full of totally irrelevant stuff, not
sent to the mailing list of the filesystem whose disk image is being
fuzzed, etc.). But what is going on is that f2fs_empty_dir() doesn't
consider the case of a directory with an extremely large i_size on a
malicious disk image.
Specifically, the reproducer mounts an f2fs image with a directory
that has an i_size of 14814520042850357248, then calls
FS_IOC_SET_ENCRYPTION_POLICY on it.
That results in a call to f2fs_empty_dir() to check whether the
directory is empty. f2fs_empty_dir() then iterates through all
3616826182336513 blocks the directory allegedly contains to check
whether any contain anything. i_rwsem is held during this, so
anything else that tries to take it will hang."
In order to solve this issue, let's use f2fs_get_next_page_offset()
to speed up iteration by skipping holes for all below functions:
- f2fs_empty_dir
- f2fs_readdir
- find_in_level
The way why we can speed up iteration was described in
'commit 3cf4574705b4 ("f2fs: introduce get_next_page_offset to speed
up SEEK_DATA")'.
Meanwhile, in f2fs_empty_dir(), let's use f2fs_find_data_page()
instead f2fs_get_lock_data_page(), due to i_rwsem was held in
caller of f2fs_empty_dir(), there shouldn't be any races, so it's
fine to not lock dentry page during lookuping dirents in the page.
Link: https://lore.kernel.org/lkml/536944df-a0ae-1dd8-148f-510b476e1347@kernel.org/T/
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-11-08 22:33:21 +08:00
|
|
|
page = f2fs_get_read_data_page(inode, index, 0, false, next_pgofs);
|
2015-05-01 08:00:33 +08:00
|
|
|
if (IS_ERR(page))
|
|
|
|
return page;
|
|
|
|
|
|
|
|
if (PageUptodate(page))
|
|
|
|
return page;
|
|
|
|
|
|
|
|
wait_on_page_locked(page);
|
|
|
|
if (unlikely(!PageUptodate(page))) {
|
|
|
|
f2fs_put_page(page, 0);
|
|
|
|
return ERR_PTR(-EIO);
|
|
|
|
}
|
|
|
|
return page;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If it tries to access a hole, return an error.
|
|
|
|
* Because, the callers, functions in dir.c and GC, should be able to know
|
|
|
|
* whether this page exists or not.
|
|
|
|
*/
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
struct page *f2fs_get_lock_data_page(struct inode *inode, pgoff_t index,
|
2015-10-10 06:11:38 +08:00
|
|
|
bool for_write)
|
2015-05-01 08:00:33 +08:00
|
|
|
{
|
|
|
|
struct address_space *mapping = inode->i_mapping;
|
|
|
|
struct page *page;
|
2023-01-20 02:47:00 +08:00
|
|
|
|
f2fs: optimize iteration over sparse directories
Wei Chen reports a kernel bug as blew:
INFO: task syz-executor.0:29056 blocked for more than 143 seconds.
Not tainted 5.15.0-rc5 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0 state:D stack:14632 pid:29056 ppid: 6574 flags:0x00000004
Call Trace:
__schedule+0x4a1/0x1720
schedule+0x36/0xe0
rwsem_down_write_slowpath+0x322/0x7a0
fscrypt_ioctl_set_policy+0x11f/0x2a0
__f2fs_ioctl+0x1a9f/0x5780
f2fs_ioctl+0x89/0x3a0
__x64_sys_ioctl+0xe8/0x140
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Eric did some investigation on this issue, quoted from reply of Eric:
"Well, the quality of this bug report has a lot to be desired (not on
upstream kernel, reproducer is full of totally irrelevant stuff, not
sent to the mailing list of the filesystem whose disk image is being
fuzzed, etc.). But what is going on is that f2fs_empty_dir() doesn't
consider the case of a directory with an extremely large i_size on a
malicious disk image.
Specifically, the reproducer mounts an f2fs image with a directory
that has an i_size of 14814520042850357248, then calls
FS_IOC_SET_ENCRYPTION_POLICY on it.
That results in a call to f2fs_empty_dir() to check whether the
directory is empty. f2fs_empty_dir() then iterates through all
3616826182336513 blocks the directory allegedly contains to check
whether any contain anything. i_rwsem is held during this, so
anything else that tries to take it will hang."
In order to solve this issue, let's use f2fs_get_next_page_offset()
to speed up iteration by skipping holes for all below functions:
- f2fs_empty_dir
- f2fs_readdir
- find_in_level
The way why we can speed up iteration was described in
'commit 3cf4574705b4 ("f2fs: introduce get_next_page_offset to speed
up SEEK_DATA")'.
Meanwhile, in f2fs_empty_dir(), let's use f2fs_find_data_page()
instead f2fs_get_lock_data_page(), due to i_rwsem was held in
caller of f2fs_empty_dir(), there shouldn't be any races, so it's
fine to not lock dentry page during lookuping dirents in the page.
Link: https://lore.kernel.org/lkml/536944df-a0ae-1dd8-148f-510b476e1347@kernel.org/T/
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-11-08 22:33:21 +08:00
|
|
|
page = f2fs_get_read_data_page(inode, index, 0, for_write, NULL);
|
2015-05-01 08:00:33 +08:00
|
|
|
if (IS_ERR(page))
|
|
|
|
return page;
|
2013-03-08 20:29:23 +08:00
|
|
|
|
2015-05-01 08:00:33 +08:00
|
|
|
/* wait for read completion */
|
2013-03-08 20:29:23 +08:00
|
|
|
lock_page(page);
|
2023-01-20 02:47:00 +08:00
|
|
|
if (unlikely(page->mapping != mapping || !PageUptodate(page))) {
|
2016-07-03 22:05:12 +08:00
|
|
|
f2fs_put_page(page, 1);
|
|
|
|
return ERR_PTR(-EIO);
|
|
|
|
}
|
2012-11-02 16:10:12 +08:00
|
|
|
return page;
|
|
|
|
}
|
|
|
|
|
2012-11-29 12:28:09 +08:00
|
|
|
/*
|
2012-11-02 16:10:12 +08:00
|
|
|
* Caller ensures that this data page is never allocated.
|
|
|
|
* A new zero-filled data page is allocated in the page cache.
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 15:21:29 +08:00
|
|
|
*
|
2013-12-21 18:02:14 +08:00
|
|
|
* Also, caller should grab and release a rwsem by calling f2fs_lock_op() and
|
|
|
|
* f2fs_unlock_op().
|
2015-07-14 18:14:06 +08:00
|
|
|
* Note that, ipage is set only by make_empty_dir, and if any error occur,
|
|
|
|
* ipage should be released by this function.
|
2012-11-02 16:10:12 +08:00
|
|
|
*/
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
struct page *f2fs_get_new_data_page(struct inode *inode,
|
2013-12-27 16:04:17 +08:00
|
|
|
struct page *ipage, pgoff_t index, bool new_i_size)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
|
|
|
struct address_space *mapping = inode->i_mapping;
|
|
|
|
struct page *page;
|
|
|
|
struct dnode_of_data dn;
|
|
|
|
int err;
|
2016-01-02 14:03:47 +08:00
|
|
|
|
2015-10-10 06:11:38 +08:00
|
|
|
page = f2fs_grab_cache_page(mapping, index, true);
|
2015-07-14 18:14:06 +08:00
|
|
|
if (!page) {
|
|
|
|
/*
|
|
|
|
* before exiting, we should make sure ipage will be released
|
|
|
|
* if any error occur.
|
|
|
|
*/
|
|
|
|
f2fs_put_page(ipage, 1);
|
2015-04-30 02:18:42 +08:00
|
|
|
return ERR_PTR(-ENOMEM);
|
2015-07-14 18:14:06 +08:00
|
|
|
}
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2013-12-27 16:04:17 +08:00
|
|
|
set_new_dnode(&dn, inode, ipage, NULL, 0);
|
2013-11-10 23:13:18 +08:00
|
|
|
err = f2fs_reserve_block(&dn, index);
|
2015-04-30 02:18:42 +08:00
|
|
|
if (err) {
|
|
|
|
f2fs_put_page(page, 1);
|
2012-11-02 16:10:12 +08:00
|
|
|
return ERR_PTR(err);
|
2013-12-27 16:04:17 +08:00
|
|
|
}
|
2015-04-30 02:18:42 +08:00
|
|
|
if (!ipage)
|
|
|
|
f2fs_put_dnode(&dn);
|
2012-11-02 16:10:12 +08:00
|
|
|
|
|
|
|
if (PageUptodate(page))
|
2015-04-30 02:18:42 +08:00
|
|
|
goto got_it;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
|
|
|
if (dn.data_blkaddr == NEW_ADDR) {
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
|
|
|
zero_user_segment(page, 0, PAGE_SIZE);
|
2016-07-01 09:49:15 +08:00
|
|
|
if (!PageUptodate(page))
|
|
|
|
SetPageUptodate(page);
|
2012-11-02 16:10:12 +08:00
|
|
|
} else {
|
2015-04-24 03:04:33 +08:00
|
|
|
f2fs_put_page(page, 1);
|
2013-12-27 16:04:17 +08:00
|
|
|
|
2016-01-02 14:03:47 +08:00
|
|
|
/* if ipage exists, blkaddr should be NEW_ADDR */
|
|
|
|
f2fs_bug_on(F2FS_I_SB(inode), ipage);
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
page = f2fs_get_lock_data_page(inode, index, true);
|
2015-04-24 03:04:33 +08:00
|
|
|
if (IS_ERR(page))
|
2016-01-02 14:03:47 +08:00
|
|
|
return page;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
2015-04-30 02:18:42 +08:00
|
|
|
got_it:
|
2015-09-11 14:43:52 +08:00
|
|
|
if (new_i_size && i_size_read(inode) <
|
2016-05-21 07:32:49 +08:00
|
|
|
((loff_t)(index + 1) << PAGE_SHIFT))
|
2016-05-21 00:22:03 +08:00
|
|
|
f2fs_i_size_write(inode, ((loff_t)(index + 1) << PAGE_SHIFT));
|
2012-11-02 16:10:12 +08:00
|
|
|
return page;
|
|
|
|
}
|
|
|
|
|
2017-11-28 08:23:00 +08:00
|
|
|
static int __allocate_data_block(struct dnode_of_data *dn, int seg_type)
|
2013-12-16 18:04:05 +08:00
|
|
|
{
|
2014-09-03 06:31:18 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
|
2013-12-16 18:04:05 +08:00
|
|
|
struct f2fs_summary sum;
|
|
|
|
struct node_info ni;
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
block_t old_blkaddr;
|
2016-05-09 19:56:30 +08:00
|
|
|
blkcnt_t count = 1;
|
2017-07-09 00:13:07 +08:00
|
|
|
int err;
|
2013-12-16 18:04:05 +08:00
|
|
|
|
2016-05-21 01:13:22 +08:00
|
|
|
if (unlikely(is_inode_flag_set(dn->inode, FI_NO_ALLOC)))
|
2013-12-16 18:04:05 +08:00
|
|
|
return -EPERM;
|
f2fs: preallocate fallocated blocks for direct IO
Normally, due to DIO_SKIP_HOLES flag is set by default, blockdev_direct_IO in
f2fs_direct_IO tries to skip DIO in holes when writing inside i_size, this
makes us falling back to buffered IO which shows lower performance.
So in commit 59b802e5a453 ("f2fs: allocate data blocks in advance for
f2fs_direct_IO"), we improve perfromance by allocating data blocks in advance
if we meet holes no matter in i_size or not, since with it we can avoid falling
back to buffered IO.
But we forget to consider for unwritten fallocated block in this commit.
This patch tries to fix it for fallocate case, this helps to improve
performance.
Test result:
Storage info: sandisk ultra 64G micro sd card.
touch /mnt/f2fs/file
truncate -s 67108864 /mnt/f2fs/file
fallocate -o 0 -l 67108864 /mnt/f2fs/file
time dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=64 conv=notrunc oflag=direct
Time before applying the patch:
67108864 bytes (67 MB) copied, 36.16 s, 1.9 MB/s
real 0m36.162s
user 0m0.000s
sys 0m0.180s
Time after applying the patch:
67108864 bytes (67 MB) copied, 27.7776 s, 2.4 MB/s
real 0m27.780s
user 0m0.000s
sys 0m0.036s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-23 10:33:37 +08:00
|
|
|
|
2021-12-14 06:16:32 +08:00
|
|
|
err = f2fs_get_node_info(sbi, dn->nid, &ni, false);
|
2018-07-17 00:02:17 +08:00
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
2020-02-14 17:44:10 +08:00
|
|
|
dn->data_blkaddr = f2fs_data_blkaddr(dn);
|
2022-11-28 17:15:18 +08:00
|
|
|
if (dn->data_blkaddr == NULL_ADDR) {
|
2024-01-13 03:41:30 +08:00
|
|
|
err = inc_valid_block_count(sbi, dn->inode, &count, true);
|
2022-11-28 17:15:18 +08:00
|
|
|
if (unlikely(err))
|
|
|
|
return err;
|
|
|
|
}
|
2013-12-16 18:04:05 +08:00
|
|
|
|
|
|
|
set_summary(&sum, dn->nid, dn->ofs_in_node, ni.version);
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
old_blkaddr = dn->data_blkaddr;
|
2024-02-22 20:18:50 +08:00
|
|
|
err = f2fs_allocate_data_block(sbi, NULL, old_blkaddr,
|
|
|
|
&dn->data_blkaddr, &sum, seg_type, NULL);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
2023-12-10 17:20:39 +08:00
|
|
|
if (GET_SEGNO(sbi, old_blkaddr) != NULL_SEGNO)
|
|
|
|
f2fs_invalidate_internal_cache(sbi, old_blkaddr);
|
|
|
|
|
2019-08-28 17:33:35 +08:00
|
|
|
f2fs_update_data_blkaddr(dn, dn->data_blkaddr);
|
2013-12-16 18:04:05 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2022-11-28 17:15:16 +08:00
|
|
|
static void f2fs_map_lock(struct f2fs_sb_info *sbi, int flag)
|
2017-03-13 20:22:18 +08:00
|
|
|
{
|
2022-11-28 17:15:16 +08:00
|
|
|
if (flag == F2FS_GET_BLOCK_PRE_AIO)
|
|
|
|
f2fs_down_read(&sbi->node_change);
|
|
|
|
else
|
|
|
|
f2fs_lock_op(sbi);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void f2fs_map_unlock(struct f2fs_sb_info *sbi, int flag)
|
|
|
|
{
|
|
|
|
if (flag == F2FS_GET_BLOCK_PRE_AIO)
|
|
|
|
f2fs_up_read(&sbi->node_change);
|
|
|
|
else
|
|
|
|
f2fs_unlock_op(sbi);
|
2017-03-13 20:22:18 +08:00
|
|
|
}
|
|
|
|
|
2022-11-28 17:15:15 +08:00
|
|
|
int f2fs_get_block_locked(struct dnode_of_data *dn, pgoff_t index)
|
|
|
|
{
|
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
|
2022-11-28 17:15:19 +08:00
|
|
|
int err = 0;
|
2022-11-28 17:15:15 +08:00
|
|
|
|
2022-11-28 17:15:16 +08:00
|
|
|
f2fs_map_lock(sbi, F2FS_GET_BLOCK_PRE_AIO);
|
2022-11-28 17:15:19 +08:00
|
|
|
if (!f2fs_lookup_read_extent_cache_block(dn->inode, index,
|
|
|
|
&dn->data_blkaddr))
|
|
|
|
err = f2fs_reserve_block(dn, index);
|
2022-11-28 17:15:16 +08:00
|
|
|
f2fs_map_unlock(sbi, F2FS_GET_BLOCK_PRE_AIO);
|
2022-11-28 17:15:15 +08:00
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2022-11-28 17:15:22 +08:00
|
|
|
static int f2fs_map_no_dnode(struct inode *inode,
|
|
|
|
struct f2fs_map_blocks *map, struct dnode_of_data *dn,
|
|
|
|
pgoff_t pgoff)
|
|
|
|
{
|
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* There is one exceptional case that read_node_page() may return
|
|
|
|
* -ENOENT due to filesystem has been shutdown or cp_error, return
|
|
|
|
* -EIO in that case.
|
|
|
|
*/
|
|
|
|
if (map->m_may_create &&
|
|
|
|
(is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN) || f2fs_cp_error(sbi)))
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
if (map->m_next_pgofs)
|
|
|
|
*map->m_next_pgofs = f2fs_get_next_page_offset(dn, pgoff);
|
|
|
|
if (map->m_next_extent)
|
|
|
|
*map->m_next_extent = f2fs_get_next_page_offset(dn, pgoff);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2022-11-28 17:15:21 +08:00
|
|
|
static bool f2fs_map_blocks_cached(struct inode *inode,
|
|
|
|
struct f2fs_map_blocks *map, int flag)
|
|
|
|
{
|
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
|
|
|
unsigned int maxblocks = map->m_len;
|
|
|
|
pgoff_t pgoff = (pgoff_t)map->m_lblk;
|
|
|
|
struct extent_info ei = {};
|
|
|
|
|
|
|
|
if (!f2fs_lookup_read_extent_cache(inode, pgoff, &ei))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
map->m_pblk = ei.blk + pgoff - ei.fofs;
|
|
|
|
map->m_len = min((pgoff_t)maxblocks, ei.fofs + ei.len - pgoff);
|
|
|
|
map->m_flags = F2FS_MAP_MAPPED;
|
|
|
|
if (map->m_next_extent)
|
|
|
|
*map->m_next_extent = pgoff + map->m_len;
|
|
|
|
|
|
|
|
/* for hardware encryption, but to avoid potential issue in future */
|
|
|
|
if (flag == F2FS_GET_BLOCK_DIO)
|
|
|
|
f2fs_wait_on_block_writeback_range(inode,
|
|
|
|
map->m_pblk, map->m_len);
|
|
|
|
|
|
|
|
if (f2fs_allow_multi_device_dio(sbi, flag)) {
|
|
|
|
int bidx = f2fs_target_device_index(sbi, map->m_pblk);
|
|
|
|
struct f2fs_dev_info *dev = &sbi->devs[bidx];
|
|
|
|
|
|
|
|
map->m_bdev = dev->bdev;
|
|
|
|
map->m_pblk -= dev->start_blk;
|
|
|
|
map->m_len = min(map->m_len, dev->end_blk + 1 - map->m_pblk);
|
2017-03-13 20:22:18 +08:00
|
|
|
} else {
|
2022-11-28 17:15:21 +08:00
|
|
|
map->m_bdev = inode->i_sb->s_bdev;
|
2017-03-13 20:22:18 +08:00
|
|
|
}
|
2022-11-28 17:15:21 +08:00
|
|
|
return true;
|
2017-03-13 20:22:18 +08:00
|
|
|
}
|
|
|
|
|
2024-03-25 23:27:25 +08:00
|
|
|
static bool map_is_mergeable(struct f2fs_sb_info *sbi,
|
|
|
|
struct f2fs_map_blocks *map,
|
|
|
|
block_t blkaddr, int flag, int bidx,
|
|
|
|
int ofs)
|
|
|
|
{
|
|
|
|
if (map->m_multidev_dio && map->m_bdev != FDEV(bidx).bdev)
|
|
|
|
return false;
|
|
|
|
if (map->m_pblk != NEW_ADDR && blkaddr == (map->m_pblk + ofs))
|
|
|
|
return true;
|
|
|
|
if (map->m_pblk == NEW_ADDR && blkaddr == NEW_ADDR)
|
|
|
|
return true;
|
|
|
|
if (flag == F2FS_GET_BLOCK_PRE_DIO)
|
|
|
|
return true;
|
f2fs: support to map continuous holes or preallocated address
This patch supports to map continuous holes or preallocated addresses
to improve performace of lookuping mapping info during read DIO.
[testcase 1]
xfs_io -f /mnt/f2fs/hole -c "truncate 1m" -c "fsync"
xfs_io -d /mnt/f2fs/hole -c "pread -b 1m 0 1m"
[before]
f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
......
f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576
[after]
f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x100, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576
[testcase 2]
xfs_io -f /mnt/f2fs/preallocated -c "falloc 0 1m" -c "fsync"
xfs_io -d /mnt/f2fs/preallocated -c "pread -b 1m 0 1m"
[before]
f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
......
f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576
[after]
f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0xffffffff, len = 0x100, flags = 4, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2024-03-25 23:27:26 +08:00
|
|
|
if (flag == F2FS_GET_BLOCK_DIO &&
|
|
|
|
map->m_pblk == NULL_ADDR && blkaddr == NULL_ADDR)
|
|
|
|
return true;
|
2024-03-25 23:27:25 +08:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2012-11-29 12:28:09 +08:00
|
|
|
/*
|
2020-02-27 19:30:05 +08:00
|
|
|
* f2fs_map_blocks() tries to find or build mapping relationship which
|
|
|
|
* maps continuous logical blocks to physical blocks, and return such
|
|
|
|
* info via f2fs_map_blocks structure.
|
2012-11-02 16:10:12 +08:00
|
|
|
*/
|
2022-11-28 17:15:20 +08:00
|
|
|
int f2fs_map_blocks(struct inode *inode, struct f2fs_map_blocks *map, int flag)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
2015-04-07 10:55:34 +08:00
|
|
|
unsigned int maxblocks = map->m_len;
|
2012-11-02 16:10:12 +08:00
|
|
|
struct dnode_of_data dn;
|
2015-09-21 20:17:52 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
2018-11-13 14:33:45 +08:00
|
|
|
int mode = map->m_may_create ? ALLOC_NODE : LOOKUP_NODE;
|
2016-05-09 19:56:30 +08:00
|
|
|
pgoff_t pgofs, end_offset, end;
|
2013-12-16 18:04:05 +08:00
|
|
|
int err = 0, ofs = 1;
|
2016-05-09 19:56:30 +08:00
|
|
|
unsigned int ofs_in_node, last_ofs_in_node;
|
|
|
|
blkcnt_t prealloc;
|
2015-12-17 13:20:59 +08:00
|
|
|
block_t blkaddr;
|
2018-01-11 14:42:30 +08:00
|
|
|
unsigned int start_pgofs;
|
2021-09-01 14:39:20 +08:00
|
|
|
int bidx = 0;
|
2022-11-28 17:15:23 +08:00
|
|
|
bool is_hole;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2016-08-20 15:12:01 +08:00
|
|
|
if (!maxblocks)
|
|
|
|
return 0;
|
|
|
|
|
2022-11-28 17:15:21 +08:00
|
|
|
if (!map->m_may_create && f2fs_map_blocks_cached(inode, map, flag))
|
|
|
|
goto out;
|
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
map->m_bdev = inode->i_sb->s_bdev;
|
|
|
|
map->m_multidev_dio =
|
|
|
|
f2fs_allow_multi_device_dio(F2FS_I_SB(inode), flag);
|
|
|
|
|
2015-04-07 10:55:34 +08:00
|
|
|
map->m_len = 0;
|
|
|
|
map->m_flags = 0;
|
|
|
|
|
|
|
|
/* it only supports block size == page size */
|
|
|
|
pgofs = (pgoff_t)map->m_lblk;
|
2016-05-09 19:56:30 +08:00
|
|
|
end = pgofs + maxblocks;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
next_dnode:
|
2018-11-13 14:33:45 +08:00
|
|
|
if (map->m_may_create)
|
2022-11-28 17:15:16 +08:00
|
|
|
f2fs_map_lock(sbi, flag);
|
2012-11-02 16:10:12 +08:00
|
|
|
|
|
|
|
/* When reading holes, we need its node page */
|
|
|
|
set_new_dnode(&dn, inode, NULL, NULL, 0);
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
err = f2fs_get_dnode_of_data(&dn, pgofs, mode);
|
2013-12-26 15:55:22 +08:00
|
|
|
if (err) {
|
2016-05-05 19:13:02 +08:00
|
|
|
if (flag == F2FS_GET_BLOCK_BMAP)
|
|
|
|
map->m_pblk = 0;
|
2022-11-28 17:15:22 +08:00
|
|
|
if (err == -ENOENT)
|
|
|
|
err = f2fs_map_no_dnode(inode, map, &dn, pgofs);
|
2013-12-16 18:04:05 +08:00
|
|
|
goto unlock_out;
|
2013-04-23 15:38:02 +08:00
|
|
|
}
|
2015-09-18 16:51:51 +08:00
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
start_pgofs = pgofs;
|
2016-05-09 19:56:30 +08:00
|
|
|
prealloc = 0;
|
2016-11-02 21:52:15 +08:00
|
|
|
last_ofs_in_node = ofs_in_node = dn.ofs_in_node;
|
2016-01-26 15:39:35 +08:00
|
|
|
end_offset = ADDRS_PER_PAGE(dn.node_page, inode);
|
2016-01-26 15:37:38 +08:00
|
|
|
|
|
|
|
next_block:
|
2020-02-14 17:44:10 +08:00
|
|
|
blkaddr = f2fs_data_blkaddr(&dn);
|
2022-11-28 17:15:23 +08:00
|
|
|
is_hole = !__is_valid_data_blkaddr(blkaddr);
|
|
|
|
if (!is_hole &&
|
|
|
|
!f2fs_is_valid_blkaddr(sbi, blkaddr, DATA_GENERIC_ENHANCE)) {
|
2019-06-20 11:36:14 +08:00
|
|
|
err = -EFSCORRUPTED;
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
goto sync_out;
|
|
|
|
}
|
|
|
|
|
2022-11-28 17:15:23 +08:00
|
|
|
/* use out-place-update for direct IO under LFS mode */
|
2024-04-28 09:12:36 +08:00
|
|
|
if (map->m_may_create && (is_hole ||
|
|
|
|
(flag == F2FS_GET_BLOCK_DIO && f2fs_lfs_mode(sbi) &&
|
|
|
|
!f2fs_is_pinned_file(inode)))) {
|
2022-11-28 17:15:23 +08:00
|
|
|
if (unlikely(f2fs_cp_error(sbi))) {
|
|
|
|
err = -EIO;
|
|
|
|
goto sync_out;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (flag) {
|
|
|
|
case F2FS_GET_BLOCK_PRE_AIO:
|
|
|
|
if (blkaddr == NULL_ADDR) {
|
|
|
|
prealloc++;
|
|
|
|
last_ofs_in_node = dn.ofs_in_node;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case F2FS_GET_BLOCK_PRE_DIO:
|
|
|
|
case F2FS_GET_BLOCK_DIO:
|
2018-09-27 18:34:52 +08:00
|
|
|
err = __allocate_data_block(&dn, map->m_seg_type);
|
2019-08-28 17:33:36 +08:00
|
|
|
if (err)
|
|
|
|
goto sync_out;
|
2022-11-28 17:15:23 +08:00
|
|
|
if (flag == F2FS_GET_BLOCK_PRE_DIO)
|
|
|
|
file_need_truncate(inode);
|
2019-08-28 17:33:36 +08:00
|
|
|
set_inode_flag(inode, FI_APPEND_WRITE);
|
2022-11-28 17:15:23 +08:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
WARN_ON_ONCE(1);
|
|
|
|
err = -EIO;
|
|
|
|
goto sync_out;
|
2018-09-27 18:34:52 +08:00
|
|
|
}
|
2022-11-28 17:15:23 +08:00
|
|
|
|
|
|
|
blkaddr = dn.data_blkaddr;
|
|
|
|
if (is_hole)
|
2017-02-23 19:55:05 +08:00
|
|
|
map->m_flags |= F2FS_MAP_NEW;
|
2022-11-28 17:15:23 +08:00
|
|
|
} else if (is_hole) {
|
|
|
|
if (f2fs_compressed_file(inode) &&
|
2023-08-28 22:04:16 +08:00
|
|
|
f2fs_sanity_check_cluster(&dn)) {
|
2022-11-28 17:15:23 +08:00
|
|
|
err = -EFSCORRUPTED;
|
|
|
|
f2fs_handle_error(sbi,
|
|
|
|
ERROR_CORRUPTED_CLUSTER);
|
|
|
|
goto sync_out;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (flag) {
|
|
|
|
case F2FS_GET_BLOCK_PRECACHE:
|
|
|
|
goto sync_out;
|
|
|
|
case F2FS_GET_BLOCK_BMAP:
|
|
|
|
map->m_pblk = 0;
|
|
|
|
goto sync_out;
|
|
|
|
case F2FS_GET_BLOCK_FIEMAP:
|
|
|
|
if (blkaddr == NULL_ADDR) {
|
2018-01-10 18:18:52 +08:00
|
|
|
if (map->m_next_pgofs)
|
|
|
|
*map->m_next_pgofs = pgofs + 1;
|
2016-01-26 15:37:38 +08:00
|
|
|
goto sync_out;
|
2018-01-10 18:18:52 +08:00
|
|
|
}
|
2022-11-28 17:15:23 +08:00
|
|
|
break;
|
f2fs: support to map continuous holes or preallocated address
This patch supports to map continuous holes or preallocated addresses
to improve performace of lookuping mapping info during read DIO.
[testcase 1]
xfs_io -f /mnt/f2fs/hole -c "truncate 1m" -c "fsync"
xfs_io -d /mnt/f2fs/hole -c "pread -b 1m 0 1m"
[before]
f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
......
f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576
[after]
f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x100, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576
[testcase 2]
xfs_io -f /mnt/f2fs/preallocated -c "falloc 0 1m" -c "fsync"
xfs_io -d /mnt/f2fs/preallocated -c "pread -b 1m 0 1m"
[before]
f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
......
f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576
[after]
f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0xffffffff, len = 0x100, flags = 4, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2024-03-25 23:27:26 +08:00
|
|
|
case F2FS_GET_BLOCK_DIO:
|
|
|
|
if (map->m_next_pgofs)
|
|
|
|
*map->m_next_pgofs = pgofs + 1;
|
|
|
|
break;
|
2022-11-28 17:15:23 +08:00
|
|
|
default:
|
|
|
|
/* for defragment case */
|
|
|
|
if (map->m_next_pgofs)
|
|
|
|
*map->m_next_pgofs = pgofs + 1;
|
|
|
|
goto sync_out;
|
2015-08-19 19:11:19 +08:00
|
|
|
}
|
|
|
|
}
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
if (flag == F2FS_GET_BLOCK_PRE_AIO)
|
|
|
|
goto skip;
|
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
if (map->m_multidev_dio)
|
|
|
|
bidx = f2fs_target_device_index(sbi, blkaddr);
|
|
|
|
|
2016-01-26 15:37:38 +08:00
|
|
|
if (map->m_len == 0) {
|
2022-11-28 17:15:11 +08:00
|
|
|
/* reserved delalloc block should be mapped for fiemap. */
|
2016-01-26 15:37:38 +08:00
|
|
|
if (blkaddr == NEW_ADDR)
|
2022-11-28 17:15:11 +08:00
|
|
|
map->m_flags |= F2FS_MAP_DELALLOC;
|
f2fs: support to map continuous holes or preallocated address
This patch supports to map continuous holes or preallocated addresses
to improve performace of lookuping mapping info during read DIO.
[testcase 1]
xfs_io -f /mnt/f2fs/hole -c "truncate 1m" -c "fsync"
xfs_io -d /mnt/f2fs/hole -c "pread -b 1m 0 1m"
[before]
f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
......
f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576
[after]
f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x100, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576
[testcase 2]
xfs_io -f /mnt/f2fs/preallocated -c "falloc 0 1m" -c "fsync"
xfs_io -d /mnt/f2fs/preallocated -c "pread -b 1m 0 1m"
[before]
f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
......
f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576
[after]
f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0xffffffff, len = 0x100, flags = 4, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2024-03-25 23:27:26 +08:00
|
|
|
if (flag != F2FS_GET_BLOCK_DIO || !is_hole)
|
|
|
|
map->m_flags |= F2FS_MAP_MAPPED;
|
2016-01-26 15:37:38 +08:00
|
|
|
|
|
|
|
map->m_pblk = blkaddr;
|
|
|
|
map->m_len = 1;
|
2021-09-01 14:39:20 +08:00
|
|
|
|
|
|
|
if (map->m_multidev_dio)
|
|
|
|
map->m_bdev = FDEV(bidx).bdev;
|
2024-03-25 23:27:25 +08:00
|
|
|
} else if (map_is_mergeable(sbi, map, blkaddr, flag, bidx, ofs)) {
|
2016-01-26 15:37:38 +08:00
|
|
|
ofs++;
|
|
|
|
map->m_len++;
|
|
|
|
} else {
|
|
|
|
goto sync_out;
|
|
|
|
}
|
2013-12-16 18:04:05 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
skip:
|
2013-12-16 18:04:05 +08:00
|
|
|
dn.ofs_in_node++;
|
|
|
|
pgofs++;
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
/* preallocate blocks in batch for one dnode page */
|
|
|
|
if (flag == F2FS_GET_BLOCK_PRE_AIO &&
|
|
|
|
(pgofs == end || dn.ofs_in_node == end_offset)) {
|
2015-12-17 13:20:59 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
dn.ofs_in_node = ofs_in_node;
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
err = f2fs_reserve_new_blocks(&dn, prealloc);
|
2016-05-09 19:56:30 +08:00
|
|
|
if (err)
|
|
|
|
goto sync_out;
|
2013-12-16 18:04:05 +08:00
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
map->m_len += dn.ofs_in_node - ofs_in_node;
|
|
|
|
if (prealloc && dn.ofs_in_node != last_ofs_in_node + 1) {
|
|
|
|
err = -ENOSPC;
|
|
|
|
goto sync_out;
|
2015-12-23 17:11:43 +08:00
|
|
|
}
|
2016-05-09 19:56:30 +08:00
|
|
|
dn.ofs_in_node = end_offset;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (pgofs >= end)
|
|
|
|
goto sync_out;
|
|
|
|
else if (dn.ofs_in_node < end_offset)
|
|
|
|
goto next_block;
|
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
if (flag == F2FS_GET_BLOCK_PRECACHE) {
|
|
|
|
if (map->m_flags & F2FS_MAP_MAPPED) {
|
|
|
|
unsigned int ofs = start_pgofs - map->m_lblk;
|
|
|
|
|
2022-12-01 01:26:29 +08:00
|
|
|
f2fs_update_read_extent_cache_range(&dn,
|
2018-01-11 14:42:30 +08:00
|
|
|
start_pgofs, map->m_pblk + ofs,
|
|
|
|
map->m_len - ofs);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-05-09 19:56:30 +08:00
|
|
|
f2fs_put_dnode(&dn);
|
|
|
|
|
2018-11-13 14:33:45 +08:00
|
|
|
if (map->m_may_create) {
|
2022-11-28 17:15:16 +08:00
|
|
|
f2fs_map_unlock(sbi, flag);
|
2016-10-11 22:57:03 +08:00
|
|
|
f2fs_balance_fs(sbi, dn.node_changed);
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
2016-05-09 19:56:30 +08:00
|
|
|
goto next_dnode;
|
2015-12-17 13:20:59 +08:00
|
|
|
|
2013-12-16 18:04:05 +08:00
|
|
|
sync_out:
|
2018-10-10 13:26:22 +08:00
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
if (flag == F2FS_GET_BLOCK_DIO && map->m_flags & F2FS_MAP_MAPPED) {
|
|
|
|
/*
|
|
|
|
* for hardware encryption, but to avoid potential issue
|
|
|
|
* in future
|
|
|
|
*/
|
2018-10-10 13:26:22 +08:00
|
|
|
f2fs_wait_on_block_writeback_range(inode,
|
|
|
|
map->m_pblk, map->m_len);
|
|
|
|
|
2021-09-01 14:39:20 +08:00
|
|
|
if (map->m_multidev_dio) {
|
|
|
|
block_t blk_addr = map->m_pblk;
|
|
|
|
|
|
|
|
bidx = f2fs_target_device_index(sbi, map->m_pblk);
|
|
|
|
|
|
|
|
map->m_bdev = FDEV(bidx).bdev;
|
|
|
|
map->m_pblk -= FDEV(bidx).start_blk;
|
|
|
|
|
|
|
|
if (map->m_may_create)
|
|
|
|
f2fs_update_device_state(sbi, inode->i_ino,
|
|
|
|
blk_addr, map->m_len);
|
|
|
|
|
|
|
|
f2fs_bug_on(sbi, blk_addr + map->m_len >
|
|
|
|
FDEV(bidx).end_blk + 1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
if (flag == F2FS_GET_BLOCK_PRECACHE) {
|
|
|
|
if (map->m_flags & F2FS_MAP_MAPPED) {
|
|
|
|
unsigned int ofs = start_pgofs - map->m_lblk;
|
|
|
|
|
2022-12-01 01:26:29 +08:00
|
|
|
f2fs_update_read_extent_cache_range(&dn,
|
2018-01-11 14:42:30 +08:00
|
|
|
start_pgofs, map->m_pblk + ofs,
|
|
|
|
map->m_len - ofs);
|
|
|
|
}
|
|
|
|
if (map->m_next_extent)
|
|
|
|
*map->m_next_extent = pgofs + 1;
|
|
|
|
}
|
2012-11-02 16:10:12 +08:00
|
|
|
f2fs_put_dnode(&dn);
|
2013-12-16 18:04:05 +08:00
|
|
|
unlock_out:
|
2018-11-13 14:33:45 +08:00
|
|
|
if (map->m_may_create) {
|
2022-11-28 17:15:16 +08:00
|
|
|
f2fs_map_unlock(sbi, flag);
|
2016-10-11 22:57:03 +08:00
|
|
|
f2fs_balance_fs(sbi, dn.node_changed);
|
2015-12-23 05:23:35 +08:00
|
|
|
}
|
2013-12-16 18:04:05 +08:00
|
|
|
out:
|
2022-11-28 17:15:20 +08:00
|
|
|
trace_f2fs_map_blocks(inode, map, flag, err);
|
2013-12-16 18:04:05 +08:00
|
|
|
return err;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
|
|
|
|
2018-03-08 18:34:38 +08:00
|
|
|
bool f2fs_overwrite_io(struct inode *inode, loff_t pos, size_t len)
|
|
|
|
{
|
|
|
|
struct f2fs_map_blocks map;
|
|
|
|
block_t last_lblk;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (pos + len > i_size_read(inode))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
map.m_lblk = F2FS_BYTES_TO_BLK(pos);
|
|
|
|
map.m_next_pgofs = NULL;
|
|
|
|
map.m_next_extent = NULL;
|
|
|
|
map.m_seg_type = NO_CHECK_TYPE;
|
2018-11-20 04:29:35 +08:00
|
|
|
map.m_may_create = false;
|
2018-03-08 18:34:38 +08:00
|
|
|
last_lblk = F2FS_BLK_ALIGN(pos + len);
|
|
|
|
|
|
|
|
while (map.m_lblk < last_lblk) {
|
|
|
|
map.m_len = last_lblk - map.m_lblk;
|
2022-11-28 17:15:20 +08:00
|
|
|
err = f2fs_map_blocks(inode, &map, F2FS_GET_BLOCK_DEFAULT);
|
2018-03-08 18:34:38 +08:00
|
|
|
if (err || map.m_len == 0)
|
|
|
|
return false;
|
|
|
|
map.m_lblk += map.m_len;
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2020-11-25 07:04:27 +08:00
|
|
|
static inline u64 bytes_to_blks(struct inode *inode, u64 bytes)
|
|
|
|
{
|
|
|
|
return (bytes >> inode->i_blkbits);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u64 blks_to_bytes(struct inode *inode, u64 blks)
|
|
|
|
{
|
|
|
|
return (blks << inode->i_blkbits);
|
|
|
|
}
|
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
static int f2fs_xattr_fiemap(struct inode *inode,
|
|
|
|
struct fiemap_extent_info *fieinfo)
|
|
|
|
{
|
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
|
|
|
struct page *page;
|
|
|
|
struct node_info ni;
|
|
|
|
__u64 phys = 0, len;
|
|
|
|
__u32 flags;
|
|
|
|
nid_t xnid = F2FS_I(inode)->i_xattr_nid;
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
if (f2fs_has_inline_xattr(inode)) {
|
|
|
|
int offset;
|
|
|
|
|
|
|
|
page = f2fs_grab_cache_page(NODE_MAPPING(sbi),
|
|
|
|
inode->i_ino, false);
|
|
|
|
if (!page)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2021-12-14 06:16:32 +08:00
|
|
|
err = f2fs_get_node_info(sbi, inode->i_ino, &ni, false);
|
2018-07-17 00:02:17 +08:00
|
|
|
if (err) {
|
|
|
|
f2fs_put_page(page, 1);
|
|
|
|
return err;
|
|
|
|
}
|
2018-01-11 14:39:57 +08:00
|
|
|
|
2020-11-25 06:55:47 +08:00
|
|
|
phys = blks_to_bytes(inode, ni.blk_addr);
|
2018-01-11 14:39:57 +08:00
|
|
|
offset = offsetof(struct f2fs_inode, i_addr) +
|
|
|
|
sizeof(__le32) * (DEF_ADDRS_PER_INODE -
|
2018-01-17 16:31:36 +08:00
|
|
|
get_inline_xattr_addrs(inode));
|
2018-01-11 14:39:57 +08:00
|
|
|
|
|
|
|
phys += offset;
|
|
|
|
len = inline_xattr_size(inode);
|
|
|
|
|
|
|
|
f2fs_put_page(page, 1);
|
|
|
|
|
|
|
|
flags = FIEMAP_EXTENT_DATA_INLINE | FIEMAP_EXTENT_NOT_ALIGNED;
|
|
|
|
|
|
|
|
if (!xnid)
|
|
|
|
flags |= FIEMAP_EXTENT_LAST;
|
|
|
|
|
|
|
|
err = fiemap_fill_next_extent(fieinfo, 0, phys, len, flags);
|
2020-06-29 20:13:13 +08:00
|
|
|
trace_f2fs_fiemap(inode, 0, phys, len, flags, err);
|
2022-09-23 15:17:55 +08:00
|
|
|
if (err)
|
2018-01-11 14:39:57 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (xnid) {
|
|
|
|
page = f2fs_grab_cache_page(NODE_MAPPING(sbi), xnid, false);
|
|
|
|
if (!page)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2021-12-14 06:16:32 +08:00
|
|
|
err = f2fs_get_node_info(sbi, xnid, &ni, false);
|
2018-07-17 00:02:17 +08:00
|
|
|
if (err) {
|
|
|
|
f2fs_put_page(page, 1);
|
|
|
|
return err;
|
|
|
|
}
|
2018-01-11 14:39:57 +08:00
|
|
|
|
2020-11-25 06:55:47 +08:00
|
|
|
phys = blks_to_bytes(inode, ni.blk_addr);
|
2018-01-11 14:39:57 +08:00
|
|
|
len = inode->i_sb->s_blocksize;
|
|
|
|
|
|
|
|
f2fs_put_page(page, 1);
|
|
|
|
|
|
|
|
flags = FIEMAP_EXTENT_LAST;
|
|
|
|
}
|
|
|
|
|
2020-06-29 20:13:13 +08:00
|
|
|
if (phys) {
|
2018-01-11 14:39:57 +08:00
|
|
|
err = fiemap_fill_next_extent(fieinfo, 0, phys, len, flags);
|
2020-06-29 20:13:13 +08:00
|
|
|
trace_f2fs_fiemap(inode, 0, phys, len, flags, err);
|
|
|
|
}
|
2018-01-11 14:39:57 +08:00
|
|
|
|
|
|
|
return (err < 0 ? err : 0);
|
|
|
|
}
|
|
|
|
|
2020-03-28 17:40:40 +08:00
|
|
|
static loff_t max_inode_blocks(struct inode *inode)
|
|
|
|
{
|
|
|
|
loff_t result = ADDRS_PER_INODE(inode);
|
|
|
|
loff_t leaf_count = ADDRS_PER_BLOCK(inode);
|
|
|
|
|
|
|
|
/* two direct node blocks */
|
|
|
|
result += (leaf_count * 2);
|
|
|
|
|
|
|
|
/* two indirect node blocks */
|
|
|
|
leaf_count *= NIDS_PER_BLOCK;
|
|
|
|
result += (leaf_count * 2);
|
|
|
|
|
|
|
|
/* one double indirect node block */
|
|
|
|
leaf_count *= NIDS_PER_BLOCK;
|
|
|
|
result += leaf_count;
|
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
2014-06-08 03:30:14 +08:00
|
|
|
int f2fs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
|
|
|
|
u64 start, u64 len)
|
|
|
|
{
|
2020-11-25 07:19:10 +08:00
|
|
|
struct f2fs_map_blocks map;
|
2015-05-09 10:30:32 +08:00
|
|
|
sector_t start_blk, last_blk;
|
2016-01-26 15:42:58 +08:00
|
|
|
pgoff_t next_pgofs;
|
2015-05-09 10:30:32 +08:00
|
|
|
u64 logical = 0, phys = 0, size = 0;
|
|
|
|
u32 flags = 0;
|
|
|
|
int ret = 0;
|
2021-07-26 12:18:19 +08:00
|
|
|
bool compr_cluster = false, compr_appended;
|
2020-03-28 17:40:40 +08:00
|
|
|
unsigned int cluster_size = F2FS_I(inode)->i_cluster_size;
|
2021-07-26 12:18:19 +08:00
|
|
|
unsigned int count_in_cluster = 0;
|
2021-03-09 13:21:18 +08:00
|
|
|
loff_t maxbytes;
|
2015-05-09 10:30:32 +08:00
|
|
|
|
2018-01-11 14:42:30 +08:00
|
|
|
if (fieinfo->fi_flags & FIEMAP_FLAG_CACHE) {
|
|
|
|
ret = f2fs_precache_extents(inode);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2020-05-23 15:30:14 +08:00
|
|
|
ret = fiemap_prep(inode, fieinfo, start, &len, FIEMAP_FLAG_XATTR);
|
2015-05-09 10:30:32 +08:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2023-11-16 14:25:55 +08:00
|
|
|
inode_lock_shared(inode);
|
2018-01-11 14:37:35 +08:00
|
|
|
|
2021-03-09 13:21:18 +08:00
|
|
|
maxbytes = max_file_blocks(inode) << F2FS_BLKSIZE_BITS;
|
|
|
|
if (start > maxbytes) {
|
|
|
|
ret = -EFBIG;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (len > maxbytes || (maxbytes - len) < start)
|
|
|
|
len = maxbytes - start;
|
|
|
|
|
2018-01-11 14:39:57 +08:00
|
|
|
if (fieinfo->fi_flags & FIEMAP_FLAG_XATTR) {
|
|
|
|
ret = f2fs_xattr_fiemap(inode, fieinfo);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2019-07-22 18:03:50 +08:00
|
|
|
if (f2fs_has_inline_data(inode) || f2fs_has_inline_dentry(inode)) {
|
2015-10-16 02:34:49 +08:00
|
|
|
ret = f2fs_inline_data_fiemap(inode, fieinfo, start, len);
|
|
|
|
if (ret != -EAGAIN)
|
2018-01-11 14:37:35 +08:00
|
|
|
goto out;
|
2015-10-16 02:34:49 +08:00
|
|
|
}
|
|
|
|
|
2020-11-25 06:55:47 +08:00
|
|
|
if (bytes_to_blks(inode, len) == 0)
|
|
|
|
len = blks_to_bytes(inode, 1);
|
2015-05-09 10:30:32 +08:00
|
|
|
|
2020-11-25 06:55:47 +08:00
|
|
|
start_blk = bytes_to_blks(inode, start);
|
|
|
|
last_blk = bytes_to_blks(inode, start + len - 1);
|
2015-12-26 18:07:41 +08:00
|
|
|
|
2015-05-09 10:30:32 +08:00
|
|
|
next:
|
2020-11-25 07:19:10 +08:00
|
|
|
memset(&map, 0, sizeof(map));
|
|
|
|
map.m_lblk = start_blk;
|
|
|
|
map.m_len = bytes_to_blks(inode, len);
|
|
|
|
map.m_next_pgofs = &next_pgofs;
|
|
|
|
map.m_seg_type = NO_CHECK_TYPE;
|
2015-05-09 10:30:32 +08:00
|
|
|
|
2021-07-26 12:18:19 +08:00
|
|
|
if (compr_cluster) {
|
|
|
|
map.m_lblk += 1;
|
|
|
|
map.m_len = cluster_size - count_in_cluster;
|
|
|
|
}
|
2020-03-28 17:40:40 +08:00
|
|
|
|
2022-11-28 17:15:20 +08:00
|
|
|
ret = f2fs_map_blocks(inode, &map, F2FS_GET_BLOCK_FIEMAP);
|
2015-05-09 10:30:32 +08:00
|
|
|
if (ret)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* HOLE */
|
2021-07-26 12:18:19 +08:00
|
|
|
if (!compr_cluster && !(map.m_flags & F2FS_MAP_FLAGS)) {
|
2016-01-26 15:42:58 +08:00
|
|
|
start_blk = next_pgofs;
|
2016-10-11 22:57:04 +08:00
|
|
|
|
2020-11-25 06:55:47 +08:00
|
|
|
if (blks_to_bytes(inode, start_blk) < blks_to_bytes(inode,
|
2020-03-28 17:40:40 +08:00
|
|
|
max_inode_blocks(inode)))
|
2015-12-26 18:07:41 +08:00
|
|
|
goto prep_next;
|
2016-10-11 22:57:04 +08:00
|
|
|
|
2015-12-26 18:07:41 +08:00
|
|
|
flags |= FIEMAP_EXTENT_LAST;
|
|
|
|
}
|
2015-05-09 10:30:32 +08:00
|
|
|
|
2021-07-26 12:18:19 +08:00
|
|
|
compr_appended = false;
|
|
|
|
/* In a case of compressed cluster, append this to the last extent */
|
2022-11-28 17:15:11 +08:00
|
|
|
if (compr_cluster && ((map.m_flags & F2FS_MAP_DELALLOC) ||
|
2021-07-26 12:18:19 +08:00
|
|
|
!(map.m_flags & F2FS_MAP_FLAGS))) {
|
|
|
|
compr_appended = true;
|
|
|
|
goto skip_fill;
|
|
|
|
}
|
|
|
|
|
2016-01-08 20:19:27 +08:00
|
|
|
if (size) {
|
2020-12-14 17:20:57 +08:00
|
|
|
flags |= FIEMAP_EXTENT_MERGED;
|
2018-12-12 17:50:11 +08:00
|
|
|
if (IS_ENCRYPTED(inode))
|
2016-01-08 20:19:27 +08:00
|
|
|
flags |= FIEMAP_EXTENT_DATA_ENCRYPTED;
|
|
|
|
|
2015-12-26 18:07:41 +08:00
|
|
|
ret = fiemap_fill_next_extent(fieinfo, logical,
|
|
|
|
phys, size, flags);
|
2020-06-29 20:13:13 +08:00
|
|
|
trace_f2fs_fiemap(inode, logical, phys, size, flags, ret);
|
2020-03-28 17:40:40 +08:00
|
|
|
if (ret)
|
|
|
|
goto out;
|
|
|
|
size = 0;
|
2016-01-08 20:19:27 +08:00
|
|
|
}
|
2015-05-09 10:30:32 +08:00
|
|
|
|
2020-03-28 17:40:40 +08:00
|
|
|
if (start_blk > last_blk)
|
2015-12-26 18:07:41 +08:00
|
|
|
goto out;
|
2015-05-09 10:30:32 +08:00
|
|
|
|
2021-07-26 12:18:19 +08:00
|
|
|
skip_fill:
|
2020-11-25 07:19:10 +08:00
|
|
|
if (map.m_pblk == COMPRESS_ADDR) {
|
2020-03-28 17:40:40 +08:00
|
|
|
compr_cluster = true;
|
2021-07-26 12:18:19 +08:00
|
|
|
count_in_cluster = 1;
|
|
|
|
} else if (compr_appended) {
|
|
|
|
unsigned int appended_blks = cluster_size -
|
|
|
|
count_in_cluster + 1;
|
|
|
|
size += blks_to_bytes(inode, appended_blks);
|
|
|
|
start_blk += appended_blks;
|
|
|
|
compr_cluster = false;
|
|
|
|
} else {
|
|
|
|
logical = blks_to_bytes(inode, start_blk);
|
|
|
|
phys = __is_valid_data_blkaddr(map.m_pblk) ?
|
|
|
|
blks_to_bytes(inode, map.m_pblk) : 0;
|
|
|
|
size = blks_to_bytes(inode, map.m_len);
|
|
|
|
flags = 0;
|
|
|
|
|
|
|
|
if (compr_cluster) {
|
|
|
|
flags = FIEMAP_EXTENT_ENCODED;
|
|
|
|
count_in_cluster += map.m_len;
|
|
|
|
if (count_in_cluster == cluster_size) {
|
|
|
|
compr_cluster = false;
|
|
|
|
size += blks_to_bytes(inode, 1);
|
|
|
|
}
|
2022-11-28 17:15:11 +08:00
|
|
|
} else if (map.m_flags & F2FS_MAP_DELALLOC) {
|
2021-07-26 12:18:19 +08:00
|
|
|
flags = FIEMAP_EXTENT_UNWRITTEN;
|
|
|
|
}
|
2015-05-09 10:30:32 +08:00
|
|
|
|
2021-07-26 12:18:19 +08:00
|
|
|
start_blk += bytes_to_blks(inode, size);
|
|
|
|
}
|
2015-05-09 10:30:32 +08:00
|
|
|
|
2015-12-26 18:07:41 +08:00
|
|
|
prep_next:
|
2015-05-09 10:30:32 +08:00
|
|
|
cond_resched();
|
|
|
|
if (fatal_signal_pending(current))
|
|
|
|
ret = -EINTR;
|
|
|
|
else
|
|
|
|
goto next;
|
|
|
|
out:
|
|
|
|
if (ret == 1)
|
|
|
|
ret = 0;
|
|
|
|
|
2023-11-16 14:25:55 +08:00
|
|
|
inode_unlock_shared(inode);
|
2015-05-09 10:30:32 +08:00
|
|
|
return ret;
|
2014-06-08 03:30:14 +08:00
|
|
|
}
|
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
|
|
|
static inline loff_t f2fs_readpage_limit(struct inode *inode)
|
|
|
|
{
|
2022-12-24 04:36:36 +08:00
|
|
|
if (IS_ENABLED(CONFIG_FS_VERITY) && IS_VERITY(inode))
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
|
|
|
return inode->i_sb->s_maxbytes;
|
|
|
|
|
|
|
|
return i_size_read(inode);
|
|
|
|
}
|
|
|
|
|
2024-06-13 02:21:56 +08:00
|
|
|
static inline blk_opf_t f2fs_ra_op_flags(struct readahead_control *rac)
|
|
|
|
{
|
|
|
|
return rac ? REQ_RAHEAD : 0;
|
|
|
|
}
|
|
|
|
|
2024-04-16 15:23:16 +08:00
|
|
|
static int f2fs_read_single_page(struct inode *inode, struct folio *folio,
|
2019-03-25 21:07:30 +08:00
|
|
|
unsigned nr_pages,
|
|
|
|
struct f2fs_map_blocks *map,
|
|
|
|
struct bio **bio_ret,
|
|
|
|
sector_t *last_block_in_bio,
|
2024-06-13 02:21:56 +08:00
|
|
|
struct readahead_control *rac)
|
2019-03-25 21:07:30 +08:00
|
|
|
{
|
|
|
|
struct bio *bio = *bio_ret;
|
2020-11-25 07:04:27 +08:00
|
|
|
const unsigned blocksize = blks_to_bytes(inode, 1);
|
2019-03-25 21:07:30 +08:00
|
|
|
sector_t block_in_file;
|
|
|
|
sector_t last_block;
|
|
|
|
sector_t last_block_in_file;
|
|
|
|
sector_t block_nr;
|
2024-04-16 15:23:16 +08:00
|
|
|
pgoff_t index = folio_index(folio);
|
2019-03-25 21:07:30 +08:00
|
|
|
int ret = 0;
|
|
|
|
|
2024-04-16 15:23:16 +08:00
|
|
|
block_in_file = (sector_t)index;
|
2019-03-25 21:07:30 +08:00
|
|
|
last_block = block_in_file + nr_pages;
|
2020-11-25 07:04:27 +08:00
|
|
|
last_block_in_file = bytes_to_blks(inode,
|
|
|
|
f2fs_readpage_limit(inode) + blocksize - 1);
|
2019-03-25 21:07:30 +08:00
|
|
|
if (last_block > last_block_in_file)
|
|
|
|
last_block = last_block_in_file;
|
|
|
|
|
|
|
|
/* just zeroing out page which is beyond EOF */
|
|
|
|
if (block_in_file >= last_block)
|
|
|
|
goto zero_out;
|
|
|
|
/*
|
|
|
|
* Map blocks using the previous result first.
|
|
|
|
*/
|
|
|
|
if ((map->m_flags & F2FS_MAP_MAPPED) &&
|
|
|
|
block_in_file > map->m_lblk &&
|
|
|
|
block_in_file < (map->m_lblk + map->m_len))
|
|
|
|
goto got_it;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Then do more f2fs_map_blocks() calls until we are
|
|
|
|
* done with this page.
|
|
|
|
*/
|
|
|
|
map->m_lblk = block_in_file;
|
|
|
|
map->m_len = last_block - block_in_file;
|
|
|
|
|
2022-11-28 17:15:20 +08:00
|
|
|
ret = f2fs_map_blocks(inode, map, F2FS_GET_BLOCK_DEFAULT);
|
2019-03-25 21:07:30 +08:00
|
|
|
if (ret)
|
|
|
|
goto out;
|
|
|
|
got_it:
|
|
|
|
if ((map->m_flags & F2FS_MAP_MAPPED)) {
|
|
|
|
block_nr = map->m_pblk + block_in_file - map->m_lblk;
|
2024-04-16 15:23:16 +08:00
|
|
|
folio_set_mappedtodisk(folio);
|
2019-03-25 21:07:30 +08:00
|
|
|
|
|
|
|
if (!f2fs_is_valid_blkaddr(F2FS_I_SB(inode), block_nr,
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
DATA_GENERIC_ENHANCE_READ)) {
|
2019-06-20 11:36:14 +08:00
|
|
|
ret = -EFSCORRUPTED;
|
2019-03-25 21:07:30 +08:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
zero_out:
|
2024-04-16 15:23:16 +08:00
|
|
|
folio_zero_segment(folio, 0, folio_size(folio));
|
|
|
|
if (f2fs_need_verity(inode, index) &&
|
|
|
|
!fsverity_verify_folio(folio)) {
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
|
|
|
ret = -EIO;
|
|
|
|
goto out;
|
|
|
|
}
|
2024-04-16 15:23:16 +08:00
|
|
|
if (!folio_test_uptodate(folio))
|
|
|
|
folio_mark_uptodate(folio);
|
|
|
|
folio_unlock(folio);
|
2019-03-25 21:07:30 +08:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This page will go to BIO. Do we need to send this
|
|
|
|
* BIO off first?
|
|
|
|
*/
|
2020-07-02 09:56:06 +08:00
|
|
|
if (bio && (!page_is_mergeable(F2FS_I_SB(inode), bio,
|
|
|
|
*last_block_in_bio, block_nr) ||
|
2024-04-16 15:23:16 +08:00
|
|
|
!f2fs_crypt_mergeable_bio(bio, inode, index, NULL))) {
|
2019-03-25 21:07:30 +08:00
|
|
|
submit_and_realloc:
|
2022-11-28 17:15:12 +08:00
|
|
|
f2fs_submit_read_bio(F2FS_I_SB(inode), bio, DATA);
|
2019-03-25 21:07:30 +08:00
|
|
|
bio = NULL;
|
|
|
|
}
|
|
|
|
if (bio == NULL) {
|
|
|
|
bio = f2fs_grab_read_bio(inode, block_nr, nr_pages,
|
2024-06-13 02:21:56 +08:00
|
|
|
f2fs_ra_op_flags(rac), index,
|
2021-01-05 14:33:02 +08:00
|
|
|
false);
|
2019-03-25 21:07:30 +08:00
|
|
|
if (IS_ERR(bio)) {
|
|
|
|
ret = PTR_ERR(bio);
|
|
|
|
bio = NULL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the page is under writeback, we need to wait for
|
|
|
|
* its completion to see the correct decrypted data.
|
|
|
|
*/
|
|
|
|
f2fs_wait_on_block_writeback(inode, block_nr);
|
|
|
|
|
2024-04-16 15:23:16 +08:00
|
|
|
if (!bio_add_folio(bio, folio, blocksize, 0))
|
2019-03-25 21:07:30 +08:00
|
|
|
goto submit_and_realloc;
|
|
|
|
|
|
|
|
inc_page_count(F2FS_I_SB(inode), F2FS_RD_DATA);
|
2022-08-20 11:04:41 +08:00
|
|
|
f2fs_update_iostat(F2FS_I_SB(inode), NULL, FS_DATA_READ_IO,
|
|
|
|
F2FS_BLKSIZE);
|
2019-03-25 21:07:30 +08:00
|
|
|
*last_block_in_bio = block_nr;
|
|
|
|
out:
|
|
|
|
*bio_ret = bio;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
int f2fs_read_multi_pages(struct compress_ctx *cc, struct bio **bio_ret,
|
|
|
|
unsigned nr_pages, sector_t *last_block_in_bio,
|
2024-06-13 02:21:56 +08:00
|
|
|
struct readahead_control *rac, bool for_write)
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
{
|
|
|
|
struct dnode_of_data dn;
|
|
|
|
struct inode *inode = cc->inode;
|
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
|
|
|
struct bio *bio = *bio_ret;
|
|
|
|
unsigned int start_idx = cc->cluster_idx << cc->log_cluster_size;
|
|
|
|
sector_t last_block_in_file;
|
2020-11-25 07:04:27 +08:00
|
|
|
const unsigned blocksize = blks_to_bytes(inode, 1);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
struct decompress_io_ctx *dic = NULL;
|
2022-12-17 06:05:44 +08:00
|
|
|
struct extent_info ei = {};
|
2021-08-04 10:23:48 +08:00
|
|
|
bool from_dnode = true;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
int i;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
f2fs_bug_on(sbi, f2fs_cluster_is_empty(cc));
|
|
|
|
|
2020-11-25 07:04:27 +08:00
|
|
|
last_block_in_file = bytes_to_blks(inode,
|
|
|
|
f2fs_readpage_limit(inode) + blocksize - 1);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
/* get rid of pages beyond EOF */
|
|
|
|
for (i = 0; i < cc->cluster_size; i++) {
|
|
|
|
struct page *page = cc->rpages[i];
|
|
|
|
|
|
|
|
if (!page)
|
|
|
|
continue;
|
|
|
|
if ((sector_t)page->index >= last_block_in_file) {
|
|
|
|
zero_user_segment(page, 0, PAGE_SIZE);
|
|
|
|
if (!PageUptodate(page))
|
|
|
|
SetPageUptodate(page);
|
|
|
|
} else if (!PageUptodate(page)) {
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
unlock_page(page);
|
2021-08-31 04:30:45 +08:00
|
|
|
if (for_write)
|
|
|
|
put_page(page);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
cc->rpages[i] = NULL;
|
|
|
|
cc->nr_rpages--;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* we are done since all pages are beyond EOF */
|
|
|
|
if (f2fs_cluster_is_empty(cc))
|
|
|
|
goto out;
|
|
|
|
|
2022-12-01 01:26:29 +08:00
|
|
|
if (f2fs_lookup_read_extent_cache(inode, start_idx, &ei))
|
2021-08-04 10:23:48 +08:00
|
|
|
from_dnode = false;
|
|
|
|
|
|
|
|
if (!from_dnode)
|
|
|
|
goto skip_reading_dnode;
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
set_new_dnode(&dn, inode, NULL, NULL, 0);
|
|
|
|
ret = f2fs_get_dnode_of_data(&dn, start_idx, LOOKUP_NODE);
|
|
|
|
if (ret)
|
|
|
|
goto out;
|
|
|
|
|
2023-04-07 07:56:20 +08:00
|
|
|
if (unlikely(f2fs_cp_error(sbi))) {
|
|
|
|
ret = -EIO;
|
|
|
|
goto out_put_dnode;
|
|
|
|
}
|
2020-07-29 21:21:35 +08:00
|
|
|
f2fs_bug_on(sbi, dn.data_blkaddr != COMPRESS_ADDR);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
skip_reading_dnode:
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
for (i = 1; i < cc->cluster_size; i++) {
|
|
|
|
block_t blkaddr;
|
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
blkaddr = from_dnode ? data_blkaddr(dn.inode, dn.node_page,
|
|
|
|
dn.ofs_in_node + i) :
|
|
|
|
ei.blk + i - 1;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
if (!__is_valid_data_blkaddr(blkaddr))
|
|
|
|
break;
|
|
|
|
|
|
|
|
if (!f2fs_is_valid_blkaddr(sbi, blkaddr, DATA_GENERIC)) {
|
|
|
|
ret = -EFAULT;
|
|
|
|
goto out_put_dnode;
|
|
|
|
}
|
|
|
|
cc->nr_cpages++;
|
2021-08-04 10:23:48 +08:00
|
|
|
|
|
|
|
if (!from_dnode && i >= ei.c_len)
|
|
|
|
break;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* nothing to decompress */
|
|
|
|
if (cc->nr_cpages == 0) {
|
|
|
|
ret = 0;
|
|
|
|
goto out_put_dnode;
|
|
|
|
}
|
|
|
|
|
|
|
|
dic = f2fs_alloc_dic(cc);
|
|
|
|
if (IS_ERR(dic)) {
|
|
|
|
ret = PTR_ERR(dic);
|
|
|
|
goto out_put_dnode;
|
|
|
|
}
|
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
for (i = 0; i < cc->nr_cpages; i++) {
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
struct page *page = dic->cpages[i];
|
|
|
|
block_t blkaddr;
|
2021-01-05 14:33:02 +08:00
|
|
|
struct bio_post_read_ctx *ctx;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
blkaddr = from_dnode ? data_blkaddr(dn.inode, dn.node_page,
|
|
|
|
dn.ofs_in_node + i + 1) :
|
|
|
|
ei.blk + i;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-05-20 19:51:50 +08:00
|
|
|
f2fs_wait_on_block_writeback(inode, blkaddr);
|
|
|
|
|
|
|
|
if (f2fs_load_compressed_page(sbi, page, blkaddr)) {
|
2023-08-28 22:04:15 +08:00
|
|
|
if (atomic_dec_and_test(&dic->remaining_pages)) {
|
2022-08-03 03:24:37 +08:00
|
|
|
f2fs_decompress_cluster(dic, true);
|
2023-08-28 22:04:15 +08:00
|
|
|
break;
|
|
|
|
}
|
2021-05-20 19:51:50 +08:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2020-07-02 09:56:06 +08:00
|
|
|
if (bio && (!page_is_mergeable(sbi, bio,
|
|
|
|
*last_block_in_bio, blkaddr) ||
|
|
|
|
!f2fs_crypt_mergeable_bio(bio, inode, page->index, NULL))) {
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
submit_and_realloc:
|
2022-11-28 17:15:12 +08:00
|
|
|
f2fs_submit_read_bio(sbi, bio, DATA);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
bio = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!bio) {
|
|
|
|
bio = f2fs_grab_read_bio(inode, blkaddr, nr_pages,
|
2024-06-13 02:21:56 +08:00
|
|
|
f2fs_ra_op_flags(rac),
|
2021-01-05 14:33:02 +08:00
|
|
|
page->index, for_write);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (IS_ERR(bio)) {
|
|
|
|
ret = PTR_ERR(bio);
|
2022-08-03 03:24:37 +08:00
|
|
|
f2fs_decompress_end_io(dic, ret, true);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
f2fs_put_dnode(&dn);
|
2020-04-23 17:57:33 +08:00
|
|
|
*bio_ret = NULL;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (bio_add_page(bio, page, blocksize, 0) < blocksize)
|
|
|
|
goto submit_and_realloc;
|
|
|
|
|
f2fs: introduce periodic iostat io latency traces
Whenever we notice some sluggish issues on our machines, we are always
curious about how well all types of I/O in the f2fs filesystem are
handled. But, it's hard to get this kind of real data. First of all,
we need to reproduce the issue while turning on the profiling tool like
blktrace, but the issue doesn't happen again easily. Second, with the
intervention of any tools, the overall timing of the issue will be
slightly changed and it sometimes makes us hard to figure it out.
So, I added the feature printing out IO latency statistics tracepoint
events, which are minimal things to understand filesystem's I/O related
behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs
node on, we can get this statistics info in a periodic way and it
would cause the least overhead.
[samples]
f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4],
wr_sync_data [164/16/3331], wr_sync_node [152/3/648],
wr_sync_meta [160/2/4243], wr_async_data [24/13/15],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency:
dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count],
rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1],
wr_sync_data [120/12/2285], wr_sync_node [88/5/428],
wr_sync_meta [52/6/2990], wr_async_data [4/1/3],
wr_async_node [0/0/0], wr_async_meta [0/0/0]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 06:29:09 +08:00
|
|
|
ctx = get_post_read_ctx(bio);
|
2021-01-05 14:33:02 +08:00
|
|
|
ctx->enabled_steps |= STEP_DECOMPRESS;
|
|
|
|
refcount_inc(&dic->refcnt);
|
2020-04-21 19:36:21 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
inc_page_count(sbi, F2FS_RD_DATA);
|
2022-08-20 11:04:41 +08:00
|
|
|
f2fs_update_iostat(sbi, inode, FS_DATA_READ_IO, F2FS_BLKSIZE);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
*last_block_in_bio = blkaddr;
|
|
|
|
}
|
|
|
|
|
2021-08-04 10:23:48 +08:00
|
|
|
if (from_dnode)
|
|
|
|
f2fs_put_dnode(&dn);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
*bio_ret = bio;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_put_dnode:
|
2021-08-04 10:23:48 +08:00
|
|
|
if (from_dnode)
|
|
|
|
f2fs_put_dnode(&dn);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
out:
|
2021-01-05 14:33:02 +08:00
|
|
|
for (i = 0; i < cc->cluster_size; i++) {
|
|
|
|
if (cc->rpages[i]) {
|
|
|
|
ClearPageUptodate(cc->rpages[i]);
|
|
|
|
unlock_page(cc->rpages[i]);
|
|
|
|
}
|
|
|
|
}
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
*bio_ret = bio;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2015-04-10 02:20:42 +08:00
|
|
|
/*
|
|
|
|
* This function was originally taken from fs/mpage.c, and customized for f2fs.
|
|
|
|
* Major change was from block_size == page_size in f2fs by default.
|
|
|
|
*/
|
2020-06-02 12:47:27 +08:00
|
|
|
static int f2fs_mpage_readpages(struct inode *inode,
|
2024-04-16 15:23:15 +08:00
|
|
|
struct readahead_control *rac, struct folio *folio)
|
2015-04-10 02:20:42 +08:00
|
|
|
{
|
|
|
|
struct bio *bio = NULL;
|
|
|
|
sector_t last_block_in_bio = 0;
|
|
|
|
struct f2fs_map_blocks map;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
struct compress_ctx cc = {
|
|
|
|
.inode = inode,
|
|
|
|
.log_cluster_size = F2FS_I(inode)->i_log_cluster_size,
|
|
|
|
.cluster_size = F2FS_I(inode)->i_cluster_size,
|
|
|
|
.cluster_idx = NULL_CLUSTER,
|
|
|
|
.rpages = NULL,
|
|
|
|
.cpages = NULL,
|
|
|
|
.nr_rpages = 0,
|
|
|
|
.nr_cpages = 0,
|
|
|
|
};
|
2021-08-12 19:36:41 +08:00
|
|
|
pgoff_t nc_cluster_idx = NULL_CLUSTER;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#endif
|
2020-06-02 12:47:23 +08:00
|
|
|
unsigned nr_pages = rac ? readahead_count(rac) : 1;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
unsigned max_nr_pages = nr_pages;
|
2024-04-16 15:23:15 +08:00
|
|
|
pgoff_t index;
|
2019-03-25 21:07:30 +08:00
|
|
|
int ret = 0;
|
2015-04-10 02:20:42 +08:00
|
|
|
|
|
|
|
map.m_pblk = 0;
|
|
|
|
map.m_lblk = 0;
|
|
|
|
map.m_len = 0;
|
|
|
|
map.m_flags = 0;
|
2016-01-26 15:42:58 +08:00
|
|
|
map.m_next_pgofs = NULL;
|
2018-01-11 14:42:30 +08:00
|
|
|
map.m_next_extent = NULL;
|
2017-11-28 08:23:00 +08:00
|
|
|
map.m_seg_type = NO_CHECK_TYPE;
|
2018-11-13 14:33:45 +08:00
|
|
|
map.m_may_create = false;
|
2015-04-10 02:20:42 +08:00
|
|
|
|
2017-11-25 11:46:18 +08:00
|
|
|
for (; nr_pages; nr_pages--) {
|
2020-06-02 12:47:23 +08:00
|
|
|
if (rac) {
|
2024-04-16 15:23:15 +08:00
|
|
|
folio = readahead_folio(rac);
|
|
|
|
prefetchw(&folio->flags);
|
2015-04-10 02:20:42 +08:00
|
|
|
}
|
|
|
|
|
2024-04-16 15:23:15 +08:00
|
|
|
index = folio_index(folio);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
2024-04-16 15:23:15 +08:00
|
|
|
if (!f2fs_compressed_file(inode))
|
|
|
|
goto read_single_page;
|
|
|
|
|
|
|
|
/* there are remained compressed pages, submit them */
|
|
|
|
if (!f2fs_cluster_can_merge_page(&cc, index)) {
|
|
|
|
ret = f2fs_read_multi_pages(&cc, &bio,
|
|
|
|
max_nr_pages,
|
|
|
|
&last_block_in_bio,
|
2024-06-13 02:21:56 +08:00
|
|
|
rac, false);
|
2024-04-16 15:23:15 +08:00
|
|
|
f2fs_destroy_compress_ctx(&cc, false);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (ret)
|
|
|
|
goto set_error_page;
|
2024-04-16 15:23:15 +08:00
|
|
|
}
|
|
|
|
if (cc.cluster_idx == NULL_CLUSTER) {
|
|
|
|
if (nc_cluster_idx == index >> cc.log_cluster_size)
|
|
|
|
goto read_single_page;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2024-04-16 15:23:15 +08:00
|
|
|
ret = f2fs_is_compressed_cluster(inode, index);
|
|
|
|
if (ret < 0)
|
|
|
|
goto set_error_page;
|
|
|
|
else if (!ret) {
|
|
|
|
nc_cluster_idx =
|
|
|
|
index >> cc.log_cluster_size;
|
|
|
|
goto read_single_page;
|
|
|
|
}
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2024-04-16 15:23:15 +08:00
|
|
|
nc_cluster_idx = NULL_CLUSTER;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
}
|
2024-04-16 15:23:15 +08:00
|
|
|
ret = f2fs_init_compress_ctx(&cc);
|
|
|
|
if (ret)
|
|
|
|
goto set_error_page;
|
|
|
|
|
|
|
|
f2fs_compress_ctx_add_page(&cc, &folio->page);
|
|
|
|
|
|
|
|
goto next_page;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
read_single_page:
|
|
|
|
#endif
|
|
|
|
|
2024-04-16 15:23:16 +08:00
|
|
|
ret = f2fs_read_single_page(inode, folio, max_nr_pages, &map,
|
2020-06-02 12:47:23 +08:00
|
|
|
&bio, &last_block_in_bio, rac);
|
2019-03-25 21:07:30 +08:00
|
|
|
if (ret) {
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
set_error_page:
|
|
|
|
#endif
|
2024-04-16 15:23:15 +08:00
|
|
|
folio_zero_segment(folio, 0, folio_size(folio));
|
|
|
|
folio_unlock(folio);
|
2015-04-10 02:20:42 +08:00
|
|
|
}
|
2020-06-02 12:47:23 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
2015-04-10 02:20:42 +08:00
|
|
|
next_page:
|
2020-06-02 12:47:23 +08:00
|
|
|
#endif
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
if (f2fs_compressed_file(inode)) {
|
|
|
|
/* last page */
|
|
|
|
if (nr_pages == 1 && !f2fs_cluster_is_empty(&cc)) {
|
|
|
|
ret = f2fs_read_multi_pages(&cc, &bio,
|
|
|
|
max_nr_pages,
|
|
|
|
&last_block_in_bio,
|
2024-06-13 02:21:56 +08:00
|
|
|
rac, false);
|
2021-05-10 17:30:32 +08:00
|
|
|
f2fs_destroy_compress_ctx(&cc, false);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
2015-04-10 02:20:42 +08:00
|
|
|
}
|
|
|
|
if (bio)
|
2022-11-28 17:15:12 +08:00
|
|
|
f2fs_submit_read_bio(F2FS_I_SB(inode), bio, DATA);
|
2020-06-02 12:47:23 +08:00
|
|
|
return ret;
|
2015-04-10 02:20:42 +08:00
|
|
|
}
|
|
|
|
|
2022-04-29 23:12:16 +08:00
|
|
|
static int f2fs_read_data_folio(struct file *file, struct folio *folio)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
2024-04-16 15:23:17 +08:00
|
|
|
struct inode *inode = folio_file_mapping(folio)->host;
|
2014-10-24 10:48:09 +08:00
|
|
|
int ret = -EAGAIN;
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
2024-04-16 15:23:18 +08:00
|
|
|
trace_f2fs_readpage(folio, DATA);
|
2014-05-06 16:53:08 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (!f2fs_is_compress_backend_ready(inode)) {
|
2024-04-16 15:23:17 +08:00
|
|
|
folio_unlock(folio);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
2014-08-06 22:22:50 +08:00
|
|
|
/* If the file has inline data, try to read it directly */
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
if (f2fs_has_inline_data(inode))
|
2024-04-16 15:23:17 +08:00
|
|
|
ret = f2fs_read_inline_data(inode, folio);
|
2014-10-24 10:48:09 +08:00
|
|
|
if (ret == -EAGAIN)
|
2024-04-16 15:23:15 +08:00
|
|
|
ret = f2fs_mpage_readpages(inode, NULL, folio);
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
return ret;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
|
|
|
|
2020-06-02 12:47:23 +08:00
|
|
|
static void f2fs_readahead(struct readahead_control *rac)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
2020-06-02 12:47:23 +08:00
|
|
|
struct inode *inode = rac->mapping->host;
|
2015-10-12 17:02:26 +08:00
|
|
|
|
2020-06-02 12:47:23 +08:00
|
|
|
trace_f2fs_readpages(inode, readahead_index(rac), readahead_count(rac));
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (!f2fs_is_compress_backend_ready(inode))
|
2020-06-02 12:47:23 +08:00
|
|
|
return;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2022-03-24 09:29:04 +08:00
|
|
|
/* If the file has inline data, skip readahead */
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
if (f2fs_has_inline_data(inode))
|
2020-06-02 12:47:23 +08:00
|
|
|
return;
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
2020-06-02 12:47:27 +08:00
|
|
|
f2fs_mpage_readpages(inode, rac, NULL);
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
int f2fs_encrypt_one_page(struct f2fs_io_info *fio)
|
2017-04-25 20:45:12 +08:00
|
|
|
{
|
|
|
|
struct inode *inode = fio->page->mapping->host;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
struct page *mpage, *page;
|
2017-04-25 20:45:12 +08:00
|
|
|
gfp_t gfp_flags = GFP_NOFS;
|
|
|
|
|
2017-09-06 07:54:24 +08:00
|
|
|
if (!f2fs_encrypted_file(inode))
|
2017-04-25 20:45:12 +08:00
|
|
|
return 0;
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
page = fio->compressed_page ? fio->compressed_page : fio->page;
|
|
|
|
|
2020-07-02 09:56:06 +08:00
|
|
|
if (fscrypt_inode_uses_inline_crypto(inode))
|
|
|
|
return 0;
|
|
|
|
|
2017-04-25 20:45:12 +08:00
|
|
|
retry_encrypt:
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
fio->encrypted_page = fscrypt_encrypt_pagecache_blocks(page,
|
|
|
|
PAGE_SIZE, 0, gfp_flags);
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
if (IS_ERR(fio->encrypted_page)) {
|
|
|
|
/* flush pending IOs and wait for a while in the ENOMEM case */
|
|
|
|
if (PTR_ERR(fio->encrypted_page) == -ENOMEM) {
|
|
|
|
f2fs_flush_merged_writes(fio->sbi);
|
mm: introduce memalloc_retry_wait()
Various places in the kernel - largely in filesystems - respond to a
memory allocation failure by looping around and re-trying. Some of
these cannot conveniently use __GFP_NOFAIL, for reasons such as:
- a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on
- a need to check for the process being signalled between failures
- the possibility that other recovery actions could be performed
- the allocation is quite deep in support code, and passing down an
extra flag to say if __GFP_NOFAIL is wanted would be clumsy.
Many of these currently use congestion_wait() which (in almost all
cases) simply waits the given timeout - congestion isn't tracked for
most devices.
It isn't clear what the best delay is for loops, but it is clear that
the various filesystems shouldn't be responsible for choosing a timeout.
This patch introduces memalloc_retry_wait() with takes on that
responsibility. Code that wants to retry a memory allocation can call
this function passing the GFP flags that were used. It will wait
however is appropriate.
For now, it only considers __GFP_NORETRY and whatever
gfpflags_allow_blocking() tests. If blocking is allowed without
__GFP_NORETRY, then alloc_page either made some reclaim progress, or
waited for a while, before failing. So there is no need for much
further waiting. memalloc_retry_wait() will wait until the current
jiffie ends. If this condition is not met, then alloc_page() won't have
waited much if at all. In that case memalloc_retry_wait() waits about
200ms. This is the delay that most current loops uses.
linux/sched/mm.h needs to be included in some files now,
but linux/backing-dev.h does not.
Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:07:14 +08:00
|
|
|
memalloc_retry_wait(GFP_NOFS);
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
gfp_flags |= __GFP_NOFAIL;
|
|
|
|
goto retry_encrypt;
|
|
|
|
}
|
|
|
|
return PTR_ERR(fio->encrypted_page);
|
|
|
|
}
|
2017-04-25 20:45:12 +08:00
|
|
|
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
mpage = find_lock_page(META_MAPPING(fio->sbi), fio->old_blkaddr);
|
|
|
|
if (mpage) {
|
|
|
|
if (PageUptodate(mpage))
|
|
|
|
memcpy(page_address(mpage),
|
|
|
|
page_address(fio->encrypted_page), PAGE_SIZE);
|
|
|
|
f2fs_put_page(mpage, 1);
|
2017-04-25 20:45:12 +08:00
|
|
|
}
|
f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.
So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.
To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.
Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.
for ((i = 0; i < 1000; i++))
do {
xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done
for ((i = 0; i < 1000; i+=2))
do {
rm /mnt/f2fs/dir/$i;
} done
ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);
Before:
gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1
gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
gc-6549 [001] .... 214682.213902: block_plug: [gc]
gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
gc-6549 [001] .... 214682.226414: block_plug: [gc]
gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1
gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
gc-6549 [001] .... 214682.226911: block_plug: [gc]
gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1
After:
gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1
gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
gc-5678 [003] .... 214327.026046: block_plug: [gc]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-14 22:37:25 +08:00
|
|
|
return 0;
|
2017-04-25 20:45:12 +08:00
|
|
|
}
|
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
static inline bool check_inplace_update_policy(struct inode *inode,
|
|
|
|
struct f2fs_io_info *fio)
|
2017-04-25 20:45:12 +08:00
|
|
|
{
|
2018-01-17 16:31:38 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
2017-04-25 20:45:12 +08:00
|
|
|
|
2022-11-19 03:18:39 +08:00
|
|
|
if (IS_F2FS_IPU_HONOR_OPU_WRITE(sbi) &&
|
|
|
|
is_inode_flag_set(inode, FI_OPU_WRITE))
|
2022-02-04 15:19:46 +08:00
|
|
|
return false;
|
2022-11-19 03:18:39 +08:00
|
|
|
if (IS_F2FS_IPU_FORCE(sbi))
|
2018-01-17 16:31:38 +08:00
|
|
|
return true;
|
2022-11-19 03:18:39 +08:00
|
|
|
if (IS_F2FS_IPU_SSR(sbi) && f2fs_need_SSR(sbi))
|
2018-01-17 16:31:38 +08:00
|
|
|
return true;
|
2022-11-19 03:18:39 +08:00
|
|
|
if (IS_F2FS_IPU_UTIL(sbi) && utilization(sbi) > SM_I(sbi)->min_ipu_util)
|
2018-01-17 16:31:38 +08:00
|
|
|
return true;
|
2022-11-19 03:18:39 +08:00
|
|
|
if (IS_F2FS_IPU_SSR_UTIL(sbi) && f2fs_need_SSR(sbi) &&
|
|
|
|
utilization(sbi) > SM_I(sbi)->min_ipu_util)
|
2018-01-17 16:31:38 +08:00
|
|
|
return true;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IPU for rewrite async pages
|
|
|
|
*/
|
2022-11-19 03:18:39 +08:00
|
|
|
if (IS_F2FS_IPU_ASYNC(sbi) && fio && fio->op == REQ_OP_WRITE &&
|
|
|
|
!(fio->op_flags & REQ_SYNC) && !IS_ENCRYPTED(inode))
|
2018-01-17 16:31:38 +08:00
|
|
|
return true;
|
|
|
|
|
|
|
|
/* this is only set during fdatasync */
|
2022-11-19 03:18:39 +08:00
|
|
|
if (IS_F2FS_IPU_FSYNC(sbi) && is_inode_flag_set(inode, FI_NEED_IPU))
|
2018-01-17 16:31:38 +08:00
|
|
|
return true;
|
|
|
|
|
2018-08-21 10:21:43 +08:00
|
|
|
if (unlikely(fio && is_sbi_flag_set(sbi, SBI_CP_DISABLED) &&
|
|
|
|
!f2fs_is_checkpointed_data(sbi, fio->old_blkaddr)))
|
|
|
|
return true;
|
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
bool f2fs_should_update_inplace(struct inode *inode, struct f2fs_io_info *fio)
|
2018-01-17 16:31:38 +08:00
|
|
|
{
|
2021-05-26 14:29:27 +08:00
|
|
|
/* swap file is migrating in aligned write mode */
|
|
|
|
if (is_inode_flag_set(inode, FI_ALIGNED_WRITE))
|
|
|
|
return false;
|
|
|
|
|
2017-12-08 08:25:39 +08:00
|
|
|
if (f2fs_is_pinned_file(inode))
|
|
|
|
return true;
|
2018-01-17 16:31:38 +08:00
|
|
|
|
|
|
|
/* if this is cold file, we should overwrite to avoid fragmentation */
|
2022-09-07 10:38:48 +08:00
|
|
|
if (file_is_cold(inode) && !is_inode_flag_set(inode, FI_OPU_WRITE))
|
2018-01-17 16:31:38 +08:00
|
|
|
return true;
|
|
|
|
|
|
|
|
return check_inplace_update_policy(inode, fio);
|
|
|
|
}
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
bool f2fs_should_update_outplace(struct inode *inode, struct f2fs_io_info *fio)
|
2018-01-17 16:31:38 +08:00
|
|
|
{
|
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
|
|
|
|
2021-12-10 02:25:43 +08:00
|
|
|
/* The below cases were checked when setting it. */
|
|
|
|
if (f2fs_is_pinned_file(inode))
|
|
|
|
return false;
|
|
|
|
if (fio && is_sbi_flag_set(sbi, SBI_NEED_FSCK))
|
|
|
|
return true;
|
2020-02-14 17:44:12 +08:00
|
|
|
if (f2fs_lfs_mode(sbi))
|
2018-01-17 16:31:38 +08:00
|
|
|
return true;
|
|
|
|
if (S_ISDIR(inode->i_mode))
|
|
|
|
return true;
|
f2fs: guarantee journalled quota data by checkpoint
For journalled quota mode, let checkpoint to flush dquot dirty data
and quota file data to guarntee persistence of all quota sysfile in
last checkpoint, by this way, we can avoid corrupting quota sysfile
when encountering SPO.
The implementation is as below:
1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is
cached dquot metadata changes in quota subsystem, and later checkpoint
should:
a) flush dquot metadata into quota file.
b) flush quota file to storage to keep file usage be consistent.
2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota
operation failed due to -EIO or -ENOSPC, so later,
a) checkpoint will skip syncing dquot metadata.
b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a
hint for fsck repairing.
3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota
data updating is very heavy, it may cause hungtask in block_operation().
To avoid this, if our retry time exceed threshold, let's just skip
flushing and retry in next checkpoint().
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid warnings and set fsck flag]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 20:05:00 +08:00
|
|
|
if (IS_NOQUOTA(inode))
|
|
|
|
return true;
|
2024-07-10 19:51:43 +08:00
|
|
|
if (f2fs_used_in_atomic_write(inode))
|
2018-01-17 16:31:38 +08:00
|
|
|
return true;
|
2023-09-04 23:12:42 +08:00
|
|
|
/* rewrite low ratio compress data w/ OPU mode to avoid fragmentation */
|
|
|
|
if (f2fs_compressed_file(inode) &&
|
|
|
|
F2FS_OPTION(sbi).compress_mode == COMPR_MODE_USER &&
|
|
|
|
is_inode_flag_set(inode, FI_ENABLE_COMPRESS))
|
|
|
|
return true;
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
/* swap file is migrating in aligned write mode */
|
|
|
|
if (is_inode_flag_set(inode, FI_ALIGNED_WRITE))
|
|
|
|
return true;
|
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
if (is_inode_flag_set(inode, FI_OPU_WRITE))
|
|
|
|
return true;
|
|
|
|
|
2018-01-17 16:31:38 +08:00
|
|
|
if (fio) {
|
2021-04-28 17:20:31 +08:00
|
|
|
if (page_private_gcing(fio->page))
|
2018-01-17 16:31:38 +08:00
|
|
|
return true;
|
2018-08-21 10:21:43 +08:00
|
|
|
if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED) &&
|
|
|
|
f2fs_is_checkpointed_data(sbi, fio->old_blkaddr)))
|
|
|
|
return true;
|
2018-01-17 16:31:38 +08:00
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2017-04-25 20:45:12 +08:00
|
|
|
static inline bool need_inplace_update(struct f2fs_io_info *fio)
|
|
|
|
{
|
|
|
|
struct inode *inode = fio->page->mapping->host;
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
if (f2fs_should_update_outplace(inode, fio))
|
2017-04-25 20:45:12 +08:00
|
|
|
return false;
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
return f2fs_should_update_inplace(inode, fio);
|
2017-04-25 20:45:12 +08:00
|
|
|
}
|
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
int f2fs_do_write_data_page(struct f2fs_io_info *fio)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
2015-04-24 05:38:15 +08:00
|
|
|
struct page *page = fio->page;
|
2012-11-02 16:10:12 +08:00
|
|
|
struct inode *inode = page->mapping->host;
|
|
|
|
struct dnode_of_data dn;
|
2018-07-17 00:02:17 +08:00
|
|
|
struct node_info ni;
|
2017-04-25 20:45:13 +08:00
|
|
|
bool ipu_force = false;
|
2012-11-02 16:10:12 +08:00
|
|
|
int err = 0;
|
|
|
|
|
2022-04-29 02:18:09 +08:00
|
|
|
/* Use COW inode to make dnode_of_data for atomic write */
|
|
|
|
if (f2fs_is_atomic_file(inode))
|
|
|
|
set_new_dnode(&dn, F2FS_I(inode)->cow_inode, NULL, NULL, 0);
|
|
|
|
else
|
|
|
|
set_new_dnode(&dn, inode, NULL, NULL, 0);
|
|
|
|
|
2017-04-25 20:45:13 +08:00
|
|
|
if (need_inplace_update(fio) &&
|
2022-11-28 17:15:14 +08:00
|
|
|
f2fs_lookup_read_extent_cache_block(inode, page->index,
|
|
|
|
&fio->old_blkaddr)) {
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
if (!f2fs_is_valid_blkaddr(fio->sbi, fio->old_blkaddr,
|
2024-03-08 14:25:25 +08:00
|
|
|
DATA_GENERIC_ENHANCE))
|
2019-06-20 11:36:14 +08:00
|
|
|
return -EFSCORRUPTED;
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
|
|
|
|
ipu_force = true;
|
|
|
|
fio->need_lock = LOCK_DONE;
|
|
|
|
goto got_it;
|
2017-04-25 20:45:13 +08:00
|
|
|
}
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2017-06-22 08:52:39 +08:00
|
|
|
/* Deadlock due to between page->lock and f2fs_lock_op */
|
|
|
|
if (fio->need_lock == LOCK_REQ && !f2fs_trylock_op(fio->sbi))
|
|
|
|
return -EAGAIN;
|
2017-04-27 00:17:21 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
err = f2fs_get_dnode_of_data(&dn, page->index, LOOKUP_NODE);
|
2012-11-02 16:10:12 +08:00
|
|
|
if (err)
|
2017-04-27 00:17:21 +08:00
|
|
|
goto out;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
f2fs: support revoking atomic written pages
f2fs support atomic write with following semantics:
1. open db file
2. ioctl start atomic write
3. (write db file) * n
4. ioctl commit atomic write
5. close db file
With this flow we can avoid file becoming corrupted when abnormal power
cut, because we hold data of transaction in referenced pages linked in
inmem_pages list of inode, but without setting them dirty, so these data
won't be persisted unless we commit them in step 4.
But we should still hold journal db file in memory by using volatile
write, because our semantics of 'atomic write support' is incomplete, in
step 4, we could fail to submit all dirty data of transaction, once
partial dirty data was committed in storage, then after a checkpoint &
abnormal power-cut, db file will be corrupted forever.
So this patch tries to improve atomic write flow by adding a revoking flow,
once inner error occurs in committing, this gives another chance to try to
revoke these partial submitted data of current transaction, it makes
committing operation more like aotmical one.
If we're not lucky, once revoking operation was failed, EAGAIN will be
reported to user for suggesting doing the recovery with held journal file,
or retrying current transaction again.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-06 14:40:34 +08:00
|
|
|
fio->old_blkaddr = dn.data_blkaddr;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
|
|
|
/* This page is already truncated */
|
f2fs: trace old block address for CoWed page
This patch enables to trace old block address of CoWed page for better
debugging.
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f0, oldaddr = 0xfe8ab, newaddr = 0xfee90 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f8, oldaddr = 0xfe8b0, newaddr = 0xfee91 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4fa, oldaddr = 0xfe8ae, newaddr = 0xfee92 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x96, oldaddr = 0xf049b, newaddr = 0x2bbe rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x97, oldaddr = 0xf049c, newaddr = 0x2bbf rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x98, oldaddr = 0xf049d, newaddr = 0x2bc0 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x47, oldaddr = 0xffffffff, newaddr = 0xf2631 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x48, oldaddr = 0xffffffff, newaddr = 0xf2632 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x49, oldaddr = 0xffffffff, newaddr = 0xf2633 rw = WRITE, type = DATA
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-22 18:36:38 +08:00
|
|
|
if (fio->old_blkaddr == NULL_ADDR) {
|
2015-02-26 11:25:01 +08:00
|
|
|
ClearPageUptodate(page);
|
2021-04-28 17:20:31 +08:00
|
|
|
clear_page_private_gcing(page);
|
2012-11-02 16:10:12 +08:00
|
|
|
goto out_writepage;
|
2015-02-26 11:25:01 +08:00
|
|
|
}
|
2017-04-25 20:45:13 +08:00
|
|
|
got_it:
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
if (__is_valid_data_blkaddr(fio->old_blkaddr) &&
|
|
|
|
!f2fs_is_valid_blkaddr(fio->sbi, fio->old_blkaddr,
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
DATA_GENERIC_ENHANCE)) {
|
2019-06-20 11:36:14 +08:00
|
|
|
err = -EFSCORRUPTED;
|
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:13:44 +08:00
|
|
|
goto out_writepage;
|
|
|
|
}
|
2022-04-29 02:18:09 +08:00
|
|
|
|
2023-12-10 19:35:43 +08:00
|
|
|
/* wait for GCed page writeback via META_MAPPING */
|
2024-07-10 19:51:17 +08:00
|
|
|
if (fio->meta_gc)
|
2023-12-10 19:35:43 +08:00
|
|
|
f2fs_wait_on_block_writeback(inode, fio->old_blkaddr);
|
|
|
|
|
2012-11-02 16:10:12 +08:00
|
|
|
/*
|
|
|
|
* If current allocation needs SSR,
|
|
|
|
* it had better in-place writes for updated data.
|
|
|
|
*/
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
if (ipu_force ||
|
|
|
|
(__is_valid_data_blkaddr(fio->old_blkaddr) &&
|
2018-05-23 22:25:08 +08:00
|
|
|
need_inplace_update(fio))) {
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
err = f2fs_encrypt_one_page(fio);
|
2017-05-13 04:51:34 +08:00
|
|
|
if (err)
|
|
|
|
goto out_writepage;
|
|
|
|
|
|
|
|
set_page_writeback(page);
|
2017-04-27 00:17:21 +08:00
|
|
|
f2fs_put_dnode(&dn);
|
2017-05-13 04:51:34 +08:00
|
|
|
if (fio->need_lock == LOCK_REQ)
|
2017-04-27 00:17:21 +08:00
|
|
|
f2fs_unlock_op(fio->sbi);
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
err = f2fs_inplace_write_data(fio);
|
2019-02-21 20:37:14 +08:00
|
|
|
if (err) {
|
2020-07-02 09:56:06 +08:00
|
|
|
if (fscrypt_inode_uses_fs_layer_crypto(inode))
|
2019-05-21 00:29:39 +08:00
|
|
|
fscrypt_finalize_bounce_page(&fio->encrypted_page);
|
2024-03-27 09:27:02 +08:00
|
|
|
end_page_writeback(page);
|
2019-04-15 15:30:53 +08:00
|
|
|
} else {
|
|
|
|
set_inode_flag(inode, FI_UPDATE_WRITE);
|
2019-02-21 20:37:14 +08:00
|
|
|
}
|
2024-04-16 15:23:18 +08:00
|
|
|
trace_f2fs_do_write_data_page(page_folio(page), IPU);
|
2017-04-27 00:17:21 +08:00
|
|
|
return err;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2017-05-13 04:51:34 +08:00
|
|
|
if (fio->need_lock == LOCK_RETRY) {
|
|
|
|
if (!f2fs_trylock_op(fio->sbi)) {
|
|
|
|
err = -EAGAIN;
|
|
|
|
goto out_writepage;
|
|
|
|
}
|
|
|
|
fio->need_lock = LOCK_REQ;
|
|
|
|
}
|
|
|
|
|
2021-12-14 06:16:32 +08:00
|
|
|
err = f2fs_get_node_info(fio->sbi, dn.nid, &ni, false);
|
2018-07-17 00:02:17 +08:00
|
|
|
if (err)
|
|
|
|
goto out_writepage;
|
|
|
|
|
|
|
|
fio->version = ni.version;
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
err = f2fs_encrypt_one_page(fio);
|
2017-05-13 04:51:34 +08:00
|
|
|
if (err)
|
|
|
|
goto out_writepage;
|
|
|
|
|
|
|
|
set_page_writeback(page);
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (fio->compr_blocks && fio->old_blkaddr == COMPRESS_ADDR)
|
|
|
|
f2fs_i_compr_blocks_update(inode, fio->compr_blocks - 1, false);
|
|
|
|
|
2017-04-27 00:17:21 +08:00
|
|
|
/* LFS mode write path */
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
f2fs_outplace_write_data(&dn, fio);
|
2024-04-16 15:23:18 +08:00
|
|
|
trace_f2fs_do_write_data_page(page_folio(page), OPU);
|
2017-04-27 00:17:21 +08:00
|
|
|
set_inode_flag(inode, FI_APPEND_WRITE);
|
2012-11-02 16:10:12 +08:00
|
|
|
out_writepage:
|
|
|
|
f2fs_put_dnode(&dn);
|
2017-04-27 00:17:21 +08:00
|
|
|
out:
|
2017-05-13 04:51:34 +08:00
|
|
|
if (fio->need_lock == LOCK_REQ)
|
2017-04-27 00:17:21 +08:00
|
|
|
f2fs_unlock_op(fio->sbi);
|
2012-11-02 16:10:12 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
int f2fs_write_single_data_page(struct page *page, int *submitted,
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
struct bio **bio,
|
|
|
|
sector_t *last_block,
|
2017-08-02 23:21:48 +08:00
|
|
|
struct writeback_control *wbc,
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
enum iostat_type io_type,
|
2021-01-11 17:42:53 +08:00
|
|
|
int compr_blocks,
|
|
|
|
bool allow_balance)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
|
|
|
struct inode *inode = page->mapping->host;
|
2014-09-03 06:31:18 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
2012-11-02 16:10:12 +08:00
|
|
|
loff_t i_size = i_size_read(inode);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
const pgoff_t end_index = ((unsigned long long)i_size)
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
|
|
|
>> PAGE_SHIFT;
|
2019-11-07 17:29:00 +08:00
|
|
|
loff_t psize = (loff_t)(page->index + 1) << PAGE_SHIFT;
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
unsigned offset = 0;
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 15:21:29 +08:00
|
|
|
bool need_balance_fs = false;
|
2023-05-14 16:07:23 +08:00
|
|
|
bool quota_inode = IS_NOQUOTA(inode);
|
2012-11-02 16:10:12 +08:00
|
|
|
int err = 0;
|
2013-12-11 12:54:01 +08:00
|
|
|
struct f2fs_io_info fio = {
|
2015-04-24 05:38:15 +08:00
|
|
|
.sbi = sbi,
|
2017-09-29 13:59:38 +08:00
|
|
|
.ino = inode->i_ino,
|
2013-12-11 12:54:01 +08:00
|
|
|
.type = DATA,
|
2016-06-06 03:31:55 +08:00
|
|
|
.op = REQ_OP_WRITE,
|
2016-11-02 00:00:38 +08:00
|
|
|
.op_flags = wbc_to_write_flags(wbc),
|
2017-04-25 20:45:13 +08:00
|
|
|
.old_blkaddr = NULL_ADDR,
|
2015-04-24 05:38:15 +08:00
|
|
|
.page = page,
|
2015-04-24 03:04:33 +08:00
|
|
|
.encrypted_page = NULL,
|
2023-02-02 15:04:56 +08:00
|
|
|
.submitted = 0,
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
.compr_blocks = compr_blocks,
|
2024-01-13 03:41:28 +08:00
|
|
|
.need_lock = compr_blocks ? LOCK_DONE : LOCK_RETRY,
|
2024-07-10 19:51:17 +08:00
|
|
|
.meta_gc = f2fs_meta_inode_gc_required(inode) ? 1 : 0,
|
2017-08-02 23:21:48 +08:00
|
|
|
.io_type = io_type,
|
2018-01-09 19:33:39 +08:00
|
|
|
.io_wbc = wbc,
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
.bio = bio,
|
|
|
|
.last_block = last_block,
|
2013-12-11 12:54:01 +08:00
|
|
|
};
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2024-04-16 15:23:18 +08:00
|
|
|
trace_f2fs_writepage(page_folio(page), DATA);
|
2014-05-06 16:48:26 +08:00
|
|
|
|
2023-02-06 19:56:00 +08:00
|
|
|
/* we should bypass data pages to proceed the kworker jobs */
|
2018-01-18 17:29:10 +08:00
|
|
|
if (unlikely(f2fs_cp_error(sbi))) {
|
|
|
|
mapping_set_error(page->mapping, -EIO);
|
2018-05-28 16:59:26 +08:00
|
|
|
/*
|
|
|
|
* don't drop any dirty dentry pages for keeping lastest
|
|
|
|
* directory structure.
|
|
|
|
*/
|
2023-04-10 10:12:22 +08:00
|
|
|
if (S_ISDIR(inode->i_mode) &&
|
|
|
|
!is_sbi_flag_set(sbi, SBI_IS_CLOSE))
|
2018-05-28 16:59:26 +08:00
|
|
|
goto redirty_out;
|
2023-04-23 23:49:15 +08:00
|
|
|
|
|
|
|
/* keep data pages in remount-ro mode */
|
|
|
|
if (F2FS_OPTION(sbi).errors == MOUNT_ERRORS_READONLY)
|
|
|
|
goto redirty_out;
|
2018-01-18 17:29:10 +08:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2017-06-29 23:20:45 +08:00
|
|
|
if (unlikely(is_sbi_flag_set(sbi, SBI_POR_DOING)))
|
|
|
|
goto redirty_out;
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (page->index < end_index ||
|
|
|
|
f2fs_verity_in_progress(inode) ||
|
|
|
|
compr_blocks)
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 15:21:29 +08:00
|
|
|
goto write;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If the offset is out-of-range of file size,
|
|
|
|
* this page does not have to be written to disk.
|
|
|
|
*/
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
|
|
|
offset = i_size & (PAGE_SIZE - 1);
|
2014-04-15 15:04:15 +08:00
|
|
|
if ((page->index >= end_index + 1) || !offset)
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 15:21:29 +08:00
|
|
|
goto out;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
|
|
|
zero_user_segment(page, offset, PAGE_SIZE);
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 15:21:29 +08:00
|
|
|
write:
|
2020-04-10 01:25:21 +08:00
|
|
|
/* Dentry/quota blocks are controlled by checkpoint */
|
2023-05-14 16:07:23 +08:00
|
|
|
if (S_ISDIR(inode->i_mode) || quota_inode) {
|
2020-06-18 14:36:23 +08:00
|
|
|
/*
|
|
|
|
* We need to wait for node_write to avoid block allocation during
|
|
|
|
* checkpoint. This can only happen to quota writes which can cause
|
|
|
|
* the below discard race condition.
|
|
|
|
*/
|
2023-05-14 16:07:23 +08:00
|
|
|
if (quota_inode)
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_read(&sbi->node_write);
|
2020-06-18 14:36:23 +08:00
|
|
|
|
2017-05-13 04:51:34 +08:00
|
|
|
fio.need_lock = LOCK_DONE;
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
err = f2fs_do_write_data_page(&fio);
|
2020-06-18 14:36:23 +08:00
|
|
|
|
2023-05-14 16:07:23 +08:00
|
|
|
if (quota_inode)
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_read(&sbi->node_write);
|
2020-06-18 14:36:23 +08:00
|
|
|
|
2014-02-17 18:29:27 +08:00
|
|
|
goto done;
|
|
|
|
}
|
f2fs: handle inline data operations
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-10 23:13:20 +08:00
|
|
|
|
2014-02-17 18:29:27 +08:00
|
|
|
if (!wbc->for_reclaim)
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 15:21:29 +08:00
|
|
|
need_balance_fs = true;
|
2016-09-02 03:02:51 +08:00
|
|
|
else if (has_not_enough_free_secs(sbi, 0, 0))
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 15:21:29 +08:00
|
|
|
goto redirty_out;
|
2017-03-25 08:05:13 +08:00
|
|
|
else
|
|
|
|
set_inode_flag(inode, FI_HOT_DATA);
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2014-10-24 10:48:09 +08:00
|
|
|
err = -EAGAIN;
|
2017-02-23 20:31:20 +08:00
|
|
|
if (f2fs_has_inline_data(inode)) {
|
2014-10-24 10:48:09 +08:00
|
|
|
err = f2fs_write_inline_data(inode, page);
|
2017-02-23 20:31:20 +08:00
|
|
|
if (!err)
|
|
|
|
goto out;
|
|
|
|
}
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2017-05-13 04:51:34 +08:00
|
|
|
if (err == -EAGAIN) {
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
err = f2fs_do_write_data_page(&fio);
|
2017-05-13 04:51:34 +08:00
|
|
|
if (err == -EAGAIN) {
|
2024-01-13 03:41:28 +08:00
|
|
|
f2fs_bug_on(sbi, compr_blocks);
|
2017-05-13 04:51:34 +08:00
|
|
|
fio.need_lock = LOCK_REQ;
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
err = f2fs_do_write_data_page(&fio);
|
2017-05-13 04:51:34 +08:00
|
|
|
}
|
|
|
|
}
|
2017-10-09 17:55:19 +08:00
|
|
|
|
2018-01-17 16:31:37 +08:00
|
|
|
if (err) {
|
|
|
|
file_set_keep_isize(inode);
|
|
|
|
} else {
|
2020-02-27 19:30:03 +08:00
|
|
|
spin_lock(&F2FS_I(inode)->i_size_lock);
|
2018-01-17 16:31:37 +08:00
|
|
|
if (F2FS_I(inode)->last_disk_size < psize)
|
|
|
|
F2FS_I(inode)->last_disk_size = psize;
|
2020-02-27 19:30:03 +08:00
|
|
|
spin_unlock(&F2FS_I(inode)->i_size_lock);
|
2018-01-17 16:31:37 +08:00
|
|
|
}
|
2017-04-27 00:17:21 +08:00
|
|
|
|
2014-02-17 18:29:27 +08:00
|
|
|
done:
|
|
|
|
if (err && err != -ENOENT)
|
|
|
|
goto redirty_out;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 15:21:29 +08:00
|
|
|
out:
|
2014-09-13 06:53:45 +08:00
|
|
|
inode_dec_dirty_pages(inode);
|
2018-07-27 18:15:16 +08:00
|
|
|
if (err) {
|
2015-02-26 11:25:01 +08:00
|
|
|
ClearPageUptodate(page);
|
2021-04-28 17:20:31 +08:00
|
|
|
clear_page_private_gcing(page);
|
2018-07-27 18:15:16 +08:00
|
|
|
}
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
|
|
|
if (wbc->for_reclaim) {
|
2018-09-27 23:41:16 +08:00
|
|
|
f2fs_submit_merged_write_cond(sbi, NULL, page, 0, DATA);
|
2017-03-25 08:05:13 +08:00
|
|
|
clear_inode_flag(inode, FI_HOT_DATA);
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
f2fs_remove_dirty_inode(inode);
|
2017-02-04 09:44:04 +08:00
|
|
|
submitted = NULL;
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
}
|
2012-11-02 16:10:12 +08:00
|
|
|
unlock_page(page);
|
f2fs: fix potential recursive call when enabling data_flush
As Hagbard Celine reported:
Hi, this is a long standing bug that I've hit before on older kernels,
but I was not able to get the syslog saved because of the nature of
the bug. This time I had booted form a pen-drive, and was able to save
the log to it's efi-partition.
What i did to trigger it was to create a partition and format it f2fs,
then mount it with options:
"rw,relatime,lazytime,background_gc=on,disable_ext_identify,discard,heap,user_xattr,inline_xattr,acl,inline_data,inline_dentry,flush_merge,data_flush,extent_cache,mode=adaptive,active_logs=6,whint_mode=fs-based,alloc_mode=default,fsync_mode=strict".
Then I unpacked a big .tar.xz to the partition (I used a
gentoo-stage3-tarball as I was in process of installing Gentoo).
Same options just without data_flush gives no problems.
Mar 20 20:54:01 usbgentoo kernel: FAT-fs (nvme0n1p4): Volume was not
properly unmounted. Some data may be corrupt. Please run fsck.
Mar 20 21:05:23 usbgentoo kernel: kworker/dying (1588) used greatest
stack depth: 12064 bytes left
Mar 20 21:06:40 usbgentoo kernel: BUG: stack guard page was hit at
00000000a4b0733c (stack is 0000000056016422..0000000096e7463f)
Mar 20 21:06:40 usbgentoo kernel: kernel stack overflow
......
Mar 20 21:06:40 usbgentoo kernel: Call Trace:
Mar 20 21:06:40 usbgentoo kernel: read_node_page+0x71/0xf0
Mar 20 21:06:40 usbgentoo kernel: ? xas_load+0x8/0x50
Mar 20 21:06:40 usbgentoo kernel: __get_node_page+0x73/0x2a0
Mar 20 21:06:40 usbgentoo kernel: f2fs_get_dnode_of_data+0x34e/0x580
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_inline_data+0x5e/0x2a0
Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x421/0x690
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_cache_pages+0x1cf/0x460
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_data_pages+0x2b3/0x2e0
Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_chksum_verify+0x1d/0xc0
Mar 20 21:06:40 usbgentoo kernel: ? read_node_page+0x71/0xf0
Mar 20 21:06:40 usbgentoo kernel: do_writepages+0x3c/0xd0
Mar 20 21:06:40 usbgentoo kernel: __filemap_fdatawrite_range+0x7c/0xb0
Mar 20 21:06:40 usbgentoo kernel: f2fs_sync_dirty_inodes+0xf2/0x200
Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs_bg+0x2a3/0x2c0
Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_dirtied+0x21/0xc0
Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs+0xd6/0x2b0
Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x4fb/0x690
......
Mar 20 21:06:40 usbgentoo kernel: __writeback_single_inode+0x2a1/0x340
Mar 20 21:06:40 usbgentoo kernel: ? soft_cursor+0x1b4/0x220
Mar 20 21:06:40 usbgentoo kernel: writeback_sb_inodes+0x1d5/0x3e0
Mar 20 21:06:40 usbgentoo kernel: __writeback_inodes_wb+0x58/0xa0
Mar 20 21:06:40 usbgentoo kernel: wb_writeback+0x250/0x2e0
Mar 20 21:06:40 usbgentoo kernel: ? 0xffffffff8c000000
Mar 20 21:06:40 usbgentoo kernel: ? cpumask_next+0x16/0x20
Mar 20 21:06:40 usbgentoo kernel: wb_workfn+0x2f6/0x3b0
Mar 20 21:06:40 usbgentoo kernel: ? __switch_to_asm+0x40/0x70
Mar 20 21:06:40 usbgentoo kernel: process_one_work+0x1f5/0x3f0
Mar 20 21:06:40 usbgentoo kernel: worker_thread+0x28/0x3c0
Mar 20 21:06:40 usbgentoo kernel: ? rescuer_thread+0x330/0x330
Mar 20 21:06:40 usbgentoo kernel: kthread+0x10e/0x130
Mar 20 21:06:40 usbgentoo kernel: ? kthread_create_on_node+0x60/0x60
Mar 20 21:06:40 usbgentoo kernel: ret_from_fork+0x35/0x40
The root cause is that we run into an infinite recursive calling in
between f2fs_balance_fs_bg and writepage() as described below:
- f2fs_write_data_pages --- A
- __write_data_page
- f2fs_balance_fs
- f2fs_balance_fs_bg --- B
- f2fs_sync_dirty_inodes
- filemap_fdatawrite
- f2fs_write_data_pages --- A
...
- f2fs_balance_fs_bg --- B
...
In order to fix this issue, let's detect such condition in __write_data_page()
and just skip calling f2fs_balance_fs() recursively.
Reported-by: Hagbard Celine <hagbardcelin@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-02 18:52:19 +08:00
|
|
|
if (!S_ISDIR(inode->i_mode) && !IS_NOQUOTA(inode) &&
|
2022-09-14 21:28:46 +08:00
|
|
|
!F2FS_I(inode)->wb_task && allow_balance)
|
2017-04-21 04:51:57 +08:00
|
|
|
f2fs_balance_fs(sbi, need_balance_fs);
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2017-02-04 09:44:04 +08:00
|
|
|
if (unlikely(f2fs_cp_error(sbi))) {
|
2017-05-11 02:28:38 +08:00
|
|
|
f2fs_submit_merged_write(sbi, DATA);
|
2023-04-10 10:14:02 +08:00
|
|
|
if (bio && *bio)
|
|
|
|
f2fs_submit_merged_ipu_write(sbi, bio, NULL);
|
2017-02-04 09:44:04 +08:00
|
|
|
submitted = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (submitted)
|
2023-02-02 15:04:56 +08:00
|
|
|
*submitted = fio.submitted;
|
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-18 18:28:11 +08:00
|
|
|
|
2012-11-02 16:10:12 +08:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
redirty_out:
|
2014-04-15 15:04:15 +08:00
|
|
|
redirty_page_for_writepage(wbc, page);
|
2018-05-04 14:26:02 +08:00
|
|
|
/*
|
2023-02-06 19:56:00 +08:00
|
|
|
* pageout() in MM translates EAGAIN, so calls handle_write_error()
|
2018-05-04 14:26:02 +08:00
|
|
|
* -> mapping_set_error() -> set_bit(AS_EIO, ...).
|
|
|
|
* file_write_and_wait_range() will see EIO error, which is critical
|
|
|
|
* to return value of fsync() followed by atomic_write failure to user.
|
|
|
|
*/
|
|
|
|
if (!err || wbc->for_reclaim)
|
2016-11-29 11:13:43 +08:00
|
|
|
return AOP_WRITEPAGE_ACTIVATE;
|
2016-05-30 12:18:23 +08:00
|
|
|
unlock_page(page);
|
|
|
|
return err;
|
2013-01-15 15:45:24 +08:00
|
|
|
}
|
|
|
|
|
2017-02-04 09:18:00 +08:00
|
|
|
static int f2fs_write_data_page(struct page *page,
|
|
|
|
struct writeback_control *wbc)
|
|
|
|
{
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
struct inode *inode = page->mapping->host;
|
|
|
|
|
|
|
|
if (unlikely(f2fs_cp_error(F2FS_I_SB(inode))))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (f2fs_compressed_file(inode)) {
|
|
|
|
if (f2fs_is_compressed_cluster(inode, page->index)) {
|
|
|
|
redirty_page_for_writepage(wbc, page);
|
|
|
|
return AOP_WRITEPAGE_ACTIVATE;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
out:
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return f2fs_write_single_data_page(page, NULL, NULL, NULL,
|
2021-01-11 17:42:53 +08:00
|
|
|
wbc, FS_DATA_IO, 0, true);
|
2017-02-04 09:18:00 +08:00
|
|
|
}
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
/*
|
2023-02-06 19:56:00 +08:00
|
|
|
* This function was copied from write_cache_pages from mm/page-writeback.c.
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
* The major change is making write step of cold data page separately from
|
|
|
|
* warm/hot data page.
|
|
|
|
*/
|
|
|
|
static int f2fs_write_cache_pages(struct address_space *mapping,
|
2017-08-02 23:21:48 +08:00
|
|
|
struct writeback_control *wbc,
|
|
|
|
enum iostat_type io_type)
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
{
|
|
|
|
int ret = 0;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
int done = 0, retry = 0;
|
2023-08-28 22:04:14 +08:00
|
|
|
struct page *pages_local[F2FS_ONSTACK_PAGES];
|
|
|
|
struct page **pages = pages_local;
|
2023-01-05 05:14:39 +08:00
|
|
|
struct folio_batch fbatch;
|
2018-06-04 23:20:36 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_M_SB(mapping);
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
struct bio *bio = NULL;
|
|
|
|
sector_t last_block;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
struct inode *inode = mapping->host;
|
|
|
|
struct compress_ctx cc = {
|
|
|
|
.inode = inode,
|
|
|
|
.log_cluster_size = F2FS_I(inode)->i_log_cluster_size,
|
|
|
|
.cluster_size = F2FS_I(inode)->i_cluster_size,
|
|
|
|
.cluster_idx = NULL_CLUSTER,
|
|
|
|
.rpages = NULL,
|
|
|
|
.nr_rpages = 0,
|
|
|
|
.cpages = NULL,
|
2021-11-10 10:37:13 +08:00
|
|
|
.valid_nr_cpages = 0,
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
.rbuf = NULL,
|
|
|
|
.cbuf = NULL,
|
|
|
|
.rlen = PAGE_SIZE * F2FS_I(inode)->i_cluster_size,
|
|
|
|
.private = NULL,
|
|
|
|
};
|
|
|
|
#endif
|
2023-01-05 05:14:39 +08:00
|
|
|
int nr_folios, p, idx;
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
int nr_pages;
|
2023-08-28 22:04:14 +08:00
|
|
|
unsigned int max_pages = F2FS_ONSTACK_PAGES;
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
pgoff_t index;
|
|
|
|
pgoff_t end; /* Inclusive */
|
|
|
|
pgoff_t done_index;
|
|
|
|
int range_whole = 0;
|
2017-12-06 06:30:38 +08:00
|
|
|
xa_mark_t tag;
|
2018-09-27 23:41:16 +08:00
|
|
|
int nwritten = 0;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
int submitted = 0;
|
|
|
|
int i;
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
2023-08-28 22:04:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
if (f2fs_compressed_file(inode) &&
|
|
|
|
1 << cc.log_cluster_size > F2FS_ONSTACK_PAGES) {
|
|
|
|
pages = f2fs_kzalloc(sbi, sizeof(struct page *) <<
|
|
|
|
cc.log_cluster_size, GFP_NOFS | __GFP_NOFAIL);
|
|
|
|
max_pages = 1 << cc.log_cluster_size;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2023-01-05 05:14:39 +08:00
|
|
|
folio_batch_init(&fbatch);
|
|
|
|
|
2017-03-25 08:05:13 +08:00
|
|
|
if (get_dirty_pages(mapping->host) <=
|
|
|
|
SM_I(F2FS_M_SB(mapping))->min_hot_blocks)
|
|
|
|
set_inode_flag(mapping->host, FI_HOT_DATA);
|
|
|
|
else
|
|
|
|
clear_inode_flag(mapping->host, FI_HOT_DATA);
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
if (wbc->range_cyclic) {
|
2020-06-15 16:51:32 +08:00
|
|
|
index = mapping->writeback_index; /* prev offset */
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
end = -1;
|
|
|
|
} else {
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
|
|
|
index = wbc->range_start >> PAGE_SHIFT;
|
|
|
|
end = wbc->range_end >> PAGE_SHIFT;
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
|
|
|
|
range_whole = 1;
|
|
|
|
}
|
|
|
|
if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
|
|
|
|
tag = PAGECACHE_TAG_TOWRITE;
|
|
|
|
else
|
|
|
|
tag = PAGECACHE_TAG_DIRTY;
|
|
|
|
retry:
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
retry = 0;
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
|
|
|
|
tag_pages_for_writeback(mapping, index, end);
|
|
|
|
done_index = index;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
while (!done && !retry && (index <= end)) {
|
2023-01-05 05:14:39 +08:00
|
|
|
nr_pages = 0;
|
|
|
|
again:
|
|
|
|
nr_folios = filemap_get_folios_tag(mapping, &index, end,
|
|
|
|
tag, &fbatch);
|
|
|
|
if (nr_folios == 0) {
|
|
|
|
if (nr_pages)
|
|
|
|
goto write;
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
break;
|
2023-01-05 05:14:39 +08:00
|
|
|
}
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
2023-01-05 05:14:39 +08:00
|
|
|
for (i = 0; i < nr_folios; i++) {
|
|
|
|
struct folio *folio = fbatch.folios[i];
|
|
|
|
|
|
|
|
idx = 0;
|
|
|
|
p = folio_nr_pages(folio);
|
|
|
|
add_more:
|
|
|
|
pages[nr_pages] = folio_page(folio, idx);
|
|
|
|
folio_get(folio);
|
2023-08-28 22:04:14 +08:00
|
|
|
if (++nr_pages == max_pages) {
|
2023-01-05 05:14:39 +08:00
|
|
|
index = folio->index + idx + 1;
|
|
|
|
folio_batch_release(&fbatch);
|
|
|
|
goto write;
|
|
|
|
}
|
|
|
|
if (++idx < p)
|
|
|
|
goto add_more;
|
|
|
|
}
|
|
|
|
folio_batch_release(&fbatch);
|
|
|
|
goto again;
|
|
|
|
write:
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
for (i = 0; i < nr_pages; i++) {
|
2022-07-31 11:33:46 +08:00
|
|
|
struct page *page = pages[i];
|
2023-01-05 05:14:39 +08:00
|
|
|
struct folio *folio = page_folio(page);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
bool need_readd;
|
|
|
|
readd:
|
|
|
|
need_readd = false;
|
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
if (f2fs_compressed_file(inode)) {
|
2021-10-23 11:08:00 +08:00
|
|
|
void *fsdata = NULL;
|
|
|
|
struct page *pagep;
|
|
|
|
int ret2;
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
ret = f2fs_init_compress_ctx(&cc);
|
|
|
|
if (ret) {
|
|
|
|
done = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!f2fs_cluster_can_merge_page(&cc,
|
2023-01-05 05:14:39 +08:00
|
|
|
folio->index)) {
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
ret = f2fs_write_multi_pages(&cc,
|
|
|
|
&submitted, wbc, io_type);
|
|
|
|
if (!ret)
|
|
|
|
need_readd = true;
|
|
|
|
goto result;
|
|
|
|
}
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (unlikely(f2fs_cp_error(sbi)))
|
2023-01-05 05:14:39 +08:00
|
|
|
goto lock_folio;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2021-10-23 11:08:00 +08:00
|
|
|
if (!f2fs_cluster_is_empty(&cc))
|
2023-01-05 05:14:39 +08:00
|
|
|
goto lock_folio;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2022-07-31 11:33:45 +08:00
|
|
|
if (f2fs_all_cluster_page_ready(&cc,
|
2022-07-31 11:33:46 +08:00
|
|
|
pages, i, nr_pages, true))
|
2023-01-05 05:14:39 +08:00
|
|
|
goto lock_folio;
|
2022-07-31 11:33:45 +08:00
|
|
|
|
2021-10-23 11:08:00 +08:00
|
|
|
ret2 = f2fs_prepare_compress_overwrite(
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
inode, &pagep,
|
2023-01-05 05:14:39 +08:00
|
|
|
folio->index, &fsdata);
|
2021-10-23 11:08:00 +08:00
|
|
|
if (ret2 < 0) {
|
|
|
|
ret = ret2;
|
|
|
|
done = 1;
|
|
|
|
break;
|
|
|
|
} else if (ret2 &&
|
|
|
|
(!f2fs_compress_write_end(inode,
|
2023-01-05 05:14:39 +08:00
|
|
|
fsdata, folio->index, 1) ||
|
2022-07-31 11:33:45 +08:00
|
|
|
!f2fs_all_cluster_page_ready(&cc,
|
2023-01-05 05:14:39 +08:00
|
|
|
pages, i, nr_pages,
|
|
|
|
false))) {
|
2021-10-23 11:08:00 +08:00
|
|
|
retry = 1;
|
|
|
|
break;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
2018-05-23 22:25:09 +08:00
|
|
|
/* give a priority to WB_SYNC threads */
|
2018-06-04 23:20:36 +08:00
|
|
|
if (atomic_read(&sbi->wb_sync_req[DATA]) &&
|
2018-05-23 22:25:09 +08:00
|
|
|
wbc->sync_mode == WB_SYNC_NONE) {
|
|
|
|
done = 1;
|
|
|
|
break;
|
|
|
|
}
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
2023-01-05 05:14:39 +08:00
|
|
|
lock_folio:
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#endif
|
2023-01-05 05:14:39 +08:00
|
|
|
done_index = folio->index;
|
2017-06-22 08:52:39 +08:00
|
|
|
retry_write:
|
2023-01-05 05:14:39 +08:00
|
|
|
folio_lock(folio);
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
|
2023-01-05 05:14:39 +08:00
|
|
|
if (unlikely(folio->mapping != mapping)) {
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
continue_unlock:
|
2023-01-05 05:14:39 +08:00
|
|
|
folio_unlock(folio);
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2023-01-05 05:14:39 +08:00
|
|
|
if (!folio_test_dirty(folio)) {
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
/* someone wrote it for us */
|
|
|
|
goto continue_unlock;
|
|
|
|
}
|
|
|
|
|
2023-01-05 05:14:39 +08:00
|
|
|
if (folio_test_writeback(folio)) {
|
2023-03-21 01:31:36 +08:00
|
|
|
if (wbc->sync_mode == WB_SYNC_NONE)
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
goto continue_unlock;
|
2023-03-21 01:31:36 +08:00
|
|
|
f2fs_wait_on_page_writeback(&folio->page, DATA, true, true);
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
}
|
|
|
|
|
2023-01-05 05:14:39 +08:00
|
|
|
if (!folio_clear_dirty_for_io(folio))
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
goto continue_unlock;
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
if (f2fs_compressed_file(inode)) {
|
2023-01-05 05:14:39 +08:00
|
|
|
folio_get(folio);
|
|
|
|
f2fs_compress_ctx_add_page(&cc, &folio->page);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
#endif
|
2023-01-05 05:14:39 +08:00
|
|
|
ret = f2fs_write_single_data_page(&folio->page,
|
|
|
|
&submitted, &bio, &last_block,
|
|
|
|
wbc, io_type, 0, true);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (ret == AOP_WRITEPAGE_ACTIVATE)
|
2023-01-05 05:14:39 +08:00
|
|
|
folio_unlock(folio);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
result:
|
|
|
|
#endif
|
|
|
|
nwritten += submitted;
|
|
|
|
wbc->nr_to_write -= submitted;
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
if (unlikely(ret)) {
|
2016-11-29 11:13:43 +08:00
|
|
|
/*
|
|
|
|
* keep nr_to_write, since vfs uses this to
|
|
|
|
* get # of written pages.
|
|
|
|
*/
|
|
|
|
if (ret == AOP_WRITEPAGE_ACTIVATE) {
|
|
|
|
ret = 0;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
goto next;
|
2017-06-22 08:52:39 +08:00
|
|
|
} else if (ret == -EAGAIN) {
|
|
|
|
ret = 0;
|
|
|
|
if (wbc->sync_mode == WB_SYNC_ALL) {
|
2022-03-23 05:39:13 +08:00
|
|
|
f2fs_io_schedule_timeout(
|
2020-02-17 17:45:44 +08:00
|
|
|
DEFAULT_IO_TIMEOUT);
|
2017-06-22 08:52:39 +08:00
|
|
|
goto retry_write;
|
|
|
|
}
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
goto next;
|
2016-11-29 11:13:43 +08:00
|
|
|
}
|
2023-07-17 15:11:09 +08:00
|
|
|
done_index = folio_next_index(folio);
|
2016-05-30 12:18:23 +08:00
|
|
|
done = 1;
|
|
|
|
break;
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
}
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
if (wbc->nr_to_write <= 0 &&
|
2017-03-29 09:07:38 +08:00
|
|
|
wbc->sync_mode == WB_SYNC_NONE) {
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
done = 1;
|
|
|
|
break;
|
|
|
|
}
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
next:
|
|
|
|
if (need_readd)
|
|
|
|
goto readd;
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
}
|
2022-07-31 11:33:46 +08:00
|
|
|
release_pages(pages, nr_pages);
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
cond_resched();
|
|
|
|
}
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
/* flush remained pages in compress cluster */
|
|
|
|
if (f2fs_compressed_file(inode) && !f2fs_cluster_is_empty(&cc)) {
|
|
|
|
ret = f2fs_write_multi_pages(&cc, &submitted, wbc, io_type);
|
|
|
|
nwritten += submitted;
|
|
|
|
wbc->nr_to_write -= submitted;
|
|
|
|
if (ret) {
|
|
|
|
done = 1;
|
|
|
|
retry = 0;
|
|
|
|
}
|
|
|
|
}
|
2020-09-23 15:54:50 +08:00
|
|
|
if (f2fs_compressed_file(inode))
|
2021-05-10 17:30:32 +08:00
|
|
|
f2fs_destroy_compress_ctx(&cc, false);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
#endif
|
2020-06-02 20:41:47 +08:00
|
|
|
if (retry) {
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
index = 0;
|
2020-06-02 20:41:47 +08:00
|
|
|
end = -1;
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
goto retry;
|
|
|
|
}
|
2020-06-02 20:41:47 +08:00
|
|
|
if (wbc->range_cyclic && !done)
|
|
|
|
done_index = 0;
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
|
|
|
|
mapping->writeback_index = done_index;
|
|
|
|
|
2018-09-27 23:41:16 +08:00
|
|
|
if (nwritten)
|
2017-05-11 02:28:38 +08:00
|
|
|
f2fs_submit_merged_write_cond(F2FS_M_SB(mapping), mapping->host,
|
2018-09-27 23:41:16 +08:00
|
|
|
NULL, 0, DATA);
|
f2fs: add bio cache for IPU
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after
commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"), we
lost the chance of merging page in inner managed bio cache, result in
submitting more small-sized IO.
So let's add temporary bio in writepages() to cache mergeable write IO as
much as possible.
Test case:
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync"
Before:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096
After:
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536
f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-19 16:15:29 +08:00
|
|
|
/* submit cached bio of IPU write */
|
|
|
|
if (bio)
|
2019-09-30 18:53:25 +08:00
|
|
|
f2fs_submit_merged_ipu_write(sbi, &bio, NULL);
|
2016-09-29 18:50:11 +08:00
|
|
|
|
2023-08-28 22:04:14 +08:00
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
if (pages != pages_local)
|
|
|
|
kfree(pages);
|
|
|
|
#endif
|
|
|
|
|
f2fs: expose f2fs_write_cache_pages
If there are gced dirty pages and normal dirty pages in the mapping
of one inode, we might writeback them alternately with discontinuous
block address, resulting in low performance.
This patch introduces f2fs_write_cache_pages with codes copied from
write_cache_pages in mm/page-writeback.c.
In this function, we refactor flow with two steps:
1) writeback all cold type pages.
2) writeback all non-cold type pages.
By using this method, f2fs will writeback dirty pages with the same
temperature in bunch mode, it makes writeouted block being with
more continuous address, so they can be merged as much as possible
in f2fs bio cache, and also it will reduce the chance of submiting
small IO from block layer.
Test environment: 8g nokia sd card (very old sd card, but it shows
better effect when testing with this patch, and with a 32g kingston
sd card, I didn't see much more improvement).
Test step:
1. touch testfile;
2. truncate -s 512K testfile;
3. write all pages with odd index;
4. trigger gc by ioctl;
5. write all pages with even index;
6. time fsync testfile.
before:
real 0m0.402s
user 0m0.000s
sys 0m0.000s
after:
real 0m0.143s
user 0m0.004s
sys 0m0.004s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-07-14 18:56:10 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2018-08-10 08:53:34 +08:00
|
|
|
static inline bool __should_serialize_io(struct inode *inode,
|
|
|
|
struct writeback_control *wbc)
|
|
|
|
{
|
2020-03-19 19:57:57 +08:00
|
|
|
/* to avoid deadlock in path of data flush */
|
2022-09-14 21:28:46 +08:00
|
|
|
if (F2FS_I(inode)->wb_task)
|
2020-03-19 19:57:57 +08:00
|
|
|
return false;
|
|
|
|
|
2018-08-10 08:53:34 +08:00
|
|
|
if (!S_ISREG(inode->i_mode))
|
|
|
|
return false;
|
f2fs: guarantee journalled quota data by checkpoint
For journalled quota mode, let checkpoint to flush dquot dirty data
and quota file data to guarntee persistence of all quota sysfile in
last checkpoint, by this way, we can avoid corrupting quota sysfile
when encountering SPO.
The implementation is as below:
1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is
cached dquot metadata changes in quota subsystem, and later checkpoint
should:
a) flush dquot metadata into quota file.
b) flush quota file to storage to keep file usage be consistent.
2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota
operation failed due to -EIO or -ENOSPC, so later,
a) checkpoint will skip syncing dquot metadata.
b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a
hint for fsck repairing.
3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota
data updating is very heavy, it may cause hungtask in block_operation().
To avoid this, if our retry time exceed threshold, let's just skip
flushing and retry in next checkpoint().
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid warnings and set fsck flag]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 20:05:00 +08:00
|
|
|
if (IS_NOQUOTA(inode))
|
|
|
|
return false;
|
2020-03-19 19:57:57 +08:00
|
|
|
|
2020-12-01 12:08:02 +08:00
|
|
|
if (f2fs_need_compress_data(inode))
|
2020-03-19 19:57:57 +08:00
|
|
|
return true;
|
2018-08-10 08:53:34 +08:00
|
|
|
if (wbc->sync_mode != WB_SYNC_ALL)
|
|
|
|
return true;
|
|
|
|
if (get_dirty_pages(inode) >= SM_I(F2FS_I_SB(inode))->min_seq_blocks)
|
|
|
|
return true;
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2018-05-30 00:20:39 +08:00
|
|
|
static int __f2fs_write_data_pages(struct address_space *mapping,
|
2017-08-02 23:21:48 +08:00
|
|
|
struct writeback_control *wbc,
|
|
|
|
enum iostat_type io_type)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
|
|
|
struct inode *inode = mapping->host;
|
2014-09-03 06:31:18 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
2016-07-14 10:33:19 +08:00
|
|
|
struct blk_plug plug;
|
2012-11-02 16:10:12 +08:00
|
|
|
int ret;
|
2018-08-10 08:53:34 +08:00
|
|
|
bool locked = false;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2013-04-03 10:38:00 +08:00
|
|
|
/* deal with chardevs and other special file */
|
|
|
|
if (!mapping->a_ops->writepage)
|
|
|
|
return 0;
|
|
|
|
|
2015-07-17 18:02:39 +08:00
|
|
|
/* skip writing if there is no dirty page in this inode */
|
|
|
|
if (!get_dirty_pages(inode) && wbc->sync_mode == WB_SYNC_NONE)
|
|
|
|
return 0;
|
|
|
|
|
2017-06-29 23:20:45 +08:00
|
|
|
/* during POR, we don't need to trigger writepage at all. */
|
|
|
|
if (unlikely(is_sbi_flag_set(sbi, SBI_POR_DOING)))
|
|
|
|
goto skip_write;
|
|
|
|
|
f2fs: guarantee journalled quota data by checkpoint
For journalled quota mode, let checkpoint to flush dquot dirty data
and quota file data to guarntee persistence of all quota sysfile in
last checkpoint, by this way, we can avoid corrupting quota sysfile
when encountering SPO.
The implementation is as below:
1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is
cached dquot metadata changes in quota subsystem, and later checkpoint
should:
a) flush dquot metadata into quota file.
b) flush quota file to storage to keep file usage be consistent.
2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota
operation failed due to -EIO or -ENOSPC, so later,
a) checkpoint will skip syncing dquot metadata.
b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a
hint for fsck repairing.
3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota
data updating is very heavy, it may cause hungtask in block_operation().
To avoid this, if our retry time exceed threshold, let's just skip
flushing and retry in next checkpoint().
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid warnings and set fsck flag]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 20:05:00 +08:00
|
|
|
if ((S_ISDIR(inode->i_mode) || IS_NOQUOTA(inode)) &&
|
|
|
|
wbc->sync_mode == WB_SYNC_NONE &&
|
2015-10-09 01:40:07 +08:00
|
|
|
get_dirty_pages(inode) < nr_pages_to_skip(sbi, DATA) &&
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
f2fs_available_free_memory(sbi, DIRTY_DENTS))
|
2015-10-09 01:40:07 +08:00
|
|
|
goto skip_write;
|
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
/* skip writing in file defragment preparing stage */
|
|
|
|
if (is_inode_flag_set(inode, FI_SKIP_WRITES))
|
2015-10-27 09:53:45 +08:00
|
|
|
goto skip_write;
|
|
|
|
|
2016-02-04 16:14:00 +08:00
|
|
|
trace_f2fs_writepages(mapping->host, wbc, DATA);
|
|
|
|
|
2017-03-29 09:07:38 +08:00
|
|
|
/* to avoid spliting IOs due to mixed WB_SYNC_ALL and WB_SYNC_NONE */
|
|
|
|
if (wbc->sync_mode == WB_SYNC_ALL)
|
2018-06-04 23:20:36 +08:00
|
|
|
atomic_inc(&sbi->wb_sync_req[DATA]);
|
2022-01-27 13:44:49 +08:00
|
|
|
else if (atomic_read(&sbi->wb_sync_req[DATA])) {
|
|
|
|
/* to avoid potential deadlock */
|
|
|
|
if (current->plug)
|
|
|
|
blk_finish_plug(current->plug);
|
2017-03-29 09:07:38 +08:00
|
|
|
goto skip_write;
|
2022-01-27 13:44:49 +08:00
|
|
|
}
|
2017-03-29 09:07:38 +08:00
|
|
|
|
2018-08-10 08:53:34 +08:00
|
|
|
if (__should_serialize_io(inode, wbc)) {
|
|
|
|
mutex_lock(&sbi->writepages);
|
|
|
|
locked = true;
|
|
|
|
}
|
|
|
|
|
2016-07-14 10:33:19 +08:00
|
|
|
blk_start_plug(&plug);
|
2017-08-02 23:21:48 +08:00
|
|
|
ret = f2fs_write_cache_pages(mapping, wbc, io_type);
|
2016-07-14 10:33:19 +08:00
|
|
|
blk_finish_plug(&plug);
|
2017-03-29 09:07:38 +08:00
|
|
|
|
2018-08-10 08:53:34 +08:00
|
|
|
if (locked)
|
|
|
|
mutex_unlock(&sbi->writepages);
|
|
|
|
|
2017-03-29 09:07:38 +08:00
|
|
|
if (wbc->sync_mode == WB_SYNC_ALL)
|
2018-06-04 23:20:36 +08:00
|
|
|
atomic_dec(&sbi->wb_sync_req[DATA]);
|
2016-05-26 08:17:56 +08:00
|
|
|
/*
|
|
|
|
* if some pages were truncated, we cannot guarantee its mapping->host
|
|
|
|
* to detect pending bios.
|
|
|
|
*/
|
2013-12-11 12:54:01 +08:00
|
|
|
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
f2fs_remove_dirty_inode(inode);
|
2012-11-02 16:10:12 +08:00
|
|
|
return ret;
|
2014-03-18 12:43:05 +08:00
|
|
|
|
|
|
|
skip_write:
|
2014-09-13 06:53:45 +08:00
|
|
|
wbc->pages_skipped += get_dirty_pages(inode);
|
2016-02-04 16:14:00 +08:00
|
|
|
trace_f2fs_writepages(mapping->host, wbc, DATA);
|
2014-03-18 12:43:05 +08:00
|
|
|
return 0;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
|
|
|
|
2017-08-02 23:21:48 +08:00
|
|
|
static int f2fs_write_data_pages(struct address_space *mapping,
|
|
|
|
struct writeback_control *wbc)
|
|
|
|
{
|
|
|
|
struct inode *inode = mapping->host;
|
|
|
|
|
|
|
|
return __f2fs_write_data_pages(mapping, wbc,
|
|
|
|
F2FS_I(inode)->cp_task == current ?
|
|
|
|
FS_CP_DATA_IO : FS_DATA_IO);
|
|
|
|
}
|
|
|
|
|
2021-07-23 15:59:21 +08:00
|
|
|
void f2fs_write_failed(struct inode *inode, loff_t to)
|
2014-07-02 13:25:04 +08:00
|
|
|
{
|
2015-12-29 05:48:11 +08:00
|
|
|
loff_t i_size = i_size_read(inode);
|
2014-07-02 13:25:04 +08:00
|
|
|
|
2019-12-04 10:54:29 +08:00
|
|
|
if (IS_NOQUOTA(inode))
|
|
|
|
return;
|
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
|
|
|
/* In the fs-verity case, f2fs_end_enable_verity() does the truncate */
|
|
|
|
if (to > i_size && !f2fs_verity_in_progress(inode)) {
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
|
f2fs-for-5.15-rc1
In this cycle, we've addressed some performance issues such as lock contention,
misbehaving compress_cache, allowing extent_cache for compressed files, and new
sysfs to adjust ra_size for fadvise. In order to diagnose the performance issues
quickly, we also added an iostat which shows the IO latencies periodically. On
the stability side, we've found two memory leakage cases in the error path in
compression flow. And, we've also fixed various corner cases in fiemap, quota,
checkpoint=disable, zstd, and so on.
Enhancement:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fix:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code paths such
as dio, unnecessary operations, debugfs/f2fs/status, sanity check, and typos.
-----BEGIN PGP SIGNATURE-----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=W67o
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've addressed some performance issues such as lock
contention, misbehaving compress_cache, allowing extent_cache for
compressed files, and new sysfs to adjust ra_size for fadvise.
In order to diagnose the performance issues quickly, we also added an
iostat which shows the IO latencies periodically.
On the stability side, we've found two memory leakage cases in the
error path in compression flow. And, we've also fixed various corner
cases in fiemap, quota, checkpoint=disable, zstd, and so on.
Enhancements:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fixes:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code
paths such as dio, unnecessary operations, debugfs/f2fs/status, sanity
check, and typos"
* tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits)
f2fs: should put a page beyond EOF when preparing a write
f2fs: deallocate compressed pages when error happens
f2fs: enable realtime discard iff device supports discard
f2fs: guarantee to write dirty data when enabling checkpoint back
f2fs: fix to unmap pages from userspace process in punch_hole()
f2fs: fix unexpected ENOENT comes from f2fs_map_blocks()
f2fs: fix to account missing .skipped_gc_rwsem
f2fs: adjust unlock order for cleanup
f2fs: Don't create discard thread when device doesn't support realtime discard
f2fs: rebuild nat_bits during umount
f2fs: introduce periodic iostat io latency traces
f2fs: separate out iostat feature
f2fs: compress: do sanity check on cluster
f2fs: fix description about main_blkaddr node
f2fs: convert S_IRUGO to 0444
f2fs: fix to keep compatibility of fault injection interface
f2fs: support fault injection for f2fs_kmem_cache_alloc()
f2fs: compress: allow write compress released file after truncate to zero
f2fs: correct comment in segment.h
f2fs: improve sbi status info in debugfs/f2fs/status
...
2021-09-05 01:48:47 +08:00
|
|
|
filemap_invalidate_lock(inode->i_mapping);
|
2018-08-05 23:04:25 +08:00
|
|
|
|
2015-12-29 05:48:11 +08:00
|
|
|
truncate_pagecache(inode, i_size);
|
2019-12-04 10:54:29 +08:00
|
|
|
f2fs_truncate_blocks(inode, i_size, true);
|
2018-08-05 23:04:25 +08:00
|
|
|
|
f2fs-for-5.15-rc1
In this cycle, we've addressed some performance issues such as lock contention,
misbehaving compress_cache, allowing extent_cache for compressed files, and new
sysfs to adjust ra_size for fadvise. In order to diagnose the performance issues
quickly, we also added an iostat which shows the IO latencies periodically. On
the stability side, we've found two memory leakage cases in the error path in
compression flow. And, we've also fixed various corner cases in fiemap, quota,
checkpoint=disable, zstd, and so on.
Enhancement:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fix:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code paths such
as dio, unnecessary operations, debugfs/f2fs/status, sanity check, and typos.
-----BEGIN PGP SIGNATURE-----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=W67o
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've addressed some performance issues such as lock
contention, misbehaving compress_cache, allowing extent_cache for
compressed files, and new sysfs to adjust ra_size for fadvise.
In order to diagnose the performance issues quickly, we also added an
iostat which shows the IO latencies periodically.
On the stability side, we've found two memory leakage cases in the
error path in compression flow. And, we've also fixed various corner
cases in fiemap, quota, checkpoint=disable, zstd, and so on.
Enhancements:
- avoid long checkpoint latency by releasing nat_tree_lock
- collect and show iostats periodically
- support extent_cache for compressed files
- add a sysfs entry to manage ra_size given fadvise(POSIX_FADV_SEQUENTIAL)
- report f2fs GC status via sysfs
- add discard_unit=%s in mount option to handle zoned device
Bug fixes:
- fix two memory leakages when an error happens in the compressed IO flow
- fix commpress_cache to get the right LBA
- fix fiemap to deal with compressed case correctly
- fix wrong EIO returns due to SBI_NEED_FSCK
- fix missing writes when enabling checkpoint back
- fix quota deadlock
- fix zstd level mount option
In addition to the above major updates, we've cleaned up several code
paths such as dio, unnecessary operations, debugfs/f2fs/status, sanity
check, and typos"
* tag 'f2fs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits)
f2fs: should put a page beyond EOF when preparing a write
f2fs: deallocate compressed pages when error happens
f2fs: enable realtime discard iff device supports discard
f2fs: guarantee to write dirty data when enabling checkpoint back
f2fs: fix to unmap pages from userspace process in punch_hole()
f2fs: fix unexpected ENOENT comes from f2fs_map_blocks()
f2fs: fix to account missing .skipped_gc_rwsem
f2fs: adjust unlock order for cleanup
f2fs: Don't create discard thread when device doesn't support realtime discard
f2fs: rebuild nat_bits during umount
f2fs: introduce periodic iostat io latency traces
f2fs: separate out iostat feature
f2fs: compress: do sanity check on cluster
f2fs: fix description about main_blkaddr node
f2fs: convert S_IRUGO to 0444
f2fs: fix to keep compatibility of fault injection interface
f2fs: support fault injection for f2fs_kmem_cache_alloc()
f2fs: compress: allow write compress released file after truncate to zero
f2fs: correct comment in segment.h
f2fs: improve sbi status info in debugfs/f2fs/status
...
2021-09-05 01:48:47 +08:00
|
|
|
filemap_invalidate_unlock(inode->i_mapping);
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
|
2014-07-02 13:25:04 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-12-24 03:55:18 +08:00
|
|
|
static int prepare_write_begin(struct f2fs_sb_info *sbi,
|
|
|
|
struct page *page, loff_t pos, unsigned len,
|
|
|
|
block_t *blk_addr, bool *node_changed)
|
|
|
|
{
|
|
|
|
struct inode *inode = page->mapping->host;
|
|
|
|
pgoff_t index = page->index;
|
|
|
|
struct dnode_of_data dn;
|
|
|
|
struct page *ipage;
|
2015-12-24 05:48:58 +08:00
|
|
|
bool locked = false;
|
2022-11-28 17:15:17 +08:00
|
|
|
int flag = F2FS_GET_BLOCK_PRE_AIO;
|
2015-12-24 03:55:18 +08:00
|
|
|
int err = 0;
|
|
|
|
|
2016-02-04 05:49:44 +08:00
|
|
|
/*
|
2021-07-16 22:39:13 +08:00
|
|
|
* If a whole page is being written and we already preallocated all the
|
|
|
|
* blocks, then there is no need to get a block address now.
|
2016-02-04 05:49:44 +08:00
|
|
|
*/
|
2021-07-16 22:39:13 +08:00
|
|
|
if (len == PAGE_SIZE && is_inode_flag_set(inode, FI_PREALLOCATED_ALL))
|
2016-02-04 05:49:44 +08:00
|
|
|
return 0;
|
|
|
|
|
2018-11-14 19:34:28 +08:00
|
|
|
/* f2fs_lock_op avoids race between write CP and convert_inline_page */
|
2022-11-28 17:15:17 +08:00
|
|
|
if (f2fs_has_inline_data(inode)) {
|
|
|
|
if (pos + len > MAX_INLINE_DATA(inode))
|
|
|
|
flag = F2FS_GET_BLOCK_DEFAULT;
|
|
|
|
f2fs_map_lock(sbi, flag);
|
|
|
|
locked = true;
|
|
|
|
} else if ((pos & PAGE_MASK) >= i_size_read(inode)) {
|
2022-11-28 17:15:16 +08:00
|
|
|
f2fs_map_lock(sbi, flag);
|
2015-12-24 05:48:58 +08:00
|
|
|
locked = true;
|
|
|
|
}
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
2015-12-24 05:48:58 +08:00
|
|
|
restart:
|
2015-12-24 03:55:18 +08:00
|
|
|
/* check inline_data */
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
ipage = f2fs_get_node_page(sbi, inode->i_ino);
|
2015-12-24 03:55:18 +08:00
|
|
|
if (IS_ERR(ipage)) {
|
|
|
|
err = PTR_ERR(ipage);
|
|
|
|
goto unlock_out;
|
|
|
|
}
|
|
|
|
|
|
|
|
set_new_dnode(&dn, inode, ipage, ipage, 0);
|
|
|
|
|
|
|
|
if (f2fs_has_inline_data(inode)) {
|
2017-07-19 00:19:05 +08:00
|
|
|
if (pos + len <= MAX_INLINE_DATA(inode)) {
|
2024-04-16 15:23:17 +08:00
|
|
|
f2fs_do_read_inline_data(page_folio(page), ipage);
|
2016-05-21 01:13:22 +08:00
|
|
|
set_inode_flag(inode, FI_DATA_EXIST);
|
2016-05-11 19:48:44 +08:00
|
|
|
if (inode->i_nlink)
|
2021-04-28 17:20:31 +08:00
|
|
|
set_page_private_inline(ipage);
|
2022-11-28 17:15:17 +08:00
|
|
|
goto out;
|
2015-12-24 03:55:18 +08:00
|
|
|
}
|
2022-11-28 17:15:17 +08:00
|
|
|
err = f2fs_convert_inline_page(&dn, page);
|
|
|
|
if (err || dn.data_blkaddr != NULL_ADDR)
|
|
|
|
goto out;
|
2015-12-24 03:55:18 +08:00
|
|
|
}
|
2015-12-24 05:48:58 +08:00
|
|
|
|
2022-11-28 17:15:17 +08:00
|
|
|
if (!f2fs_lookup_read_extent_cache_block(inode, index,
|
|
|
|
&dn.data_blkaddr)) {
|
|
|
|
if (locked) {
|
|
|
|
err = f2fs_reserve_block(&dn, index);
|
|
|
|
goto out;
|
2015-12-24 05:48:58 +08:00
|
|
|
}
|
2022-11-28 17:15:17 +08:00
|
|
|
|
2022-11-28 17:15:14 +08:00
|
|
|
/* hole case */
|
|
|
|
err = f2fs_get_dnode_of_data(&dn, index, LOOKUP_NODE);
|
2022-11-28 17:15:17 +08:00
|
|
|
if (!err && dn.data_blkaddr != NULL_ADDR)
|
|
|
|
goto out;
|
|
|
|
f2fs_put_dnode(&dn);
|
|
|
|
f2fs_map_lock(sbi, F2FS_GET_BLOCK_PRE_AIO);
|
|
|
|
WARN_ON(flag != F2FS_GET_BLOCK_PRE_AIO);
|
|
|
|
locked = true;
|
|
|
|
goto restart;
|
2015-12-24 03:55:18 +08:00
|
|
|
}
|
2015-12-24 05:48:58 +08:00
|
|
|
out:
|
2022-11-28 17:15:17 +08:00
|
|
|
if (!err) {
|
|
|
|
/* convert_inline_page can make node_changed */
|
|
|
|
*blk_addr = dn.data_blkaddr;
|
|
|
|
*node_changed = dn.node_changed;
|
|
|
|
}
|
2015-12-24 03:55:18 +08:00
|
|
|
f2fs_put_dnode(&dn);
|
|
|
|
unlock_out:
|
2015-12-24 05:48:58 +08:00
|
|
|
if (locked)
|
2022-11-28 17:15:16 +08:00
|
|
|
f2fs_map_unlock(sbi, flag);
|
2015-12-24 03:55:18 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2022-04-29 02:18:09 +08:00
|
|
|
static int __find_data_block(struct inode *inode, pgoff_t index,
|
|
|
|
block_t *blk_addr)
|
|
|
|
{
|
|
|
|
struct dnode_of_data dn;
|
|
|
|
struct page *ipage;
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
ipage = f2fs_get_node_page(F2FS_I_SB(inode), inode->i_ino);
|
|
|
|
if (IS_ERR(ipage))
|
|
|
|
return PTR_ERR(ipage);
|
|
|
|
|
|
|
|
set_new_dnode(&dn, inode, ipage, ipage, 0);
|
|
|
|
|
2022-11-28 17:15:14 +08:00
|
|
|
if (!f2fs_lookup_read_extent_cache_block(inode, index,
|
|
|
|
&dn.data_blkaddr)) {
|
2022-04-29 02:18:09 +08:00
|
|
|
/* hole case */
|
|
|
|
err = f2fs_get_dnode_of_data(&dn, index, LOOKUP_NODE);
|
|
|
|
if (err) {
|
|
|
|
dn.data_blkaddr = NULL_ADDR;
|
|
|
|
err = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
*blk_addr = dn.data_blkaddr;
|
|
|
|
f2fs_put_dnode(&dn);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __reserve_data_block(struct inode *inode, pgoff_t index,
|
|
|
|
block_t *blk_addr, bool *node_changed)
|
|
|
|
{
|
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
|
|
|
struct dnode_of_data dn;
|
|
|
|
struct page *ipage;
|
|
|
|
int err = 0;
|
|
|
|
|
2022-11-28 17:15:16 +08:00
|
|
|
f2fs_map_lock(sbi, F2FS_GET_BLOCK_PRE_AIO);
|
2022-04-29 02:18:09 +08:00
|
|
|
|
|
|
|
ipage = f2fs_get_node_page(sbi, inode->i_ino);
|
|
|
|
if (IS_ERR(ipage)) {
|
|
|
|
err = PTR_ERR(ipage);
|
|
|
|
goto unlock_out;
|
|
|
|
}
|
|
|
|
set_new_dnode(&dn, inode, ipage, ipage, 0);
|
|
|
|
|
2022-11-28 17:15:19 +08:00
|
|
|
if (!f2fs_lookup_read_extent_cache_block(dn.inode, index,
|
|
|
|
&dn.data_blkaddr))
|
|
|
|
err = f2fs_reserve_block(&dn, index);
|
2022-04-29 02:18:09 +08:00
|
|
|
|
|
|
|
*blk_addr = dn.data_blkaddr;
|
|
|
|
*node_changed = dn.node_changed;
|
|
|
|
f2fs_put_dnode(&dn);
|
|
|
|
|
|
|
|
unlock_out:
|
2022-11-28 17:15:16 +08:00
|
|
|
f2fs_map_unlock(sbi, F2FS_GET_BLOCK_PRE_AIO);
|
2022-04-29 02:18:09 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int prepare_atomic_write_begin(struct f2fs_sb_info *sbi,
|
|
|
|
struct page *page, loff_t pos, unsigned int len,
|
2023-04-19 01:52:06 +08:00
|
|
|
block_t *blk_addr, bool *node_changed, bool *use_cow)
|
2022-04-29 02:18:09 +08:00
|
|
|
{
|
|
|
|
struct inode *inode = page->mapping->host;
|
|
|
|
struct inode *cow_inode = F2FS_I(inode)->cow_inode;
|
|
|
|
pgoff_t index = page->index;
|
|
|
|
int err = 0;
|
2022-07-19 07:02:48 +08:00
|
|
|
block_t ori_blk_addr = NULL_ADDR;
|
2022-04-29 02:18:09 +08:00
|
|
|
|
|
|
|
/* If pos is beyond the end of file, reserve a new block in COW inode */
|
|
|
|
if ((pos & PAGE_MASK) >= i_size_read(inode))
|
2022-07-19 07:02:48 +08:00
|
|
|
goto reserve_block;
|
2022-04-29 02:18:09 +08:00
|
|
|
|
|
|
|
/* Look for the block in COW inode first */
|
|
|
|
err = __find_data_block(cow_inode, index, blk_addr);
|
2023-04-19 01:52:06 +08:00
|
|
|
if (err) {
|
2022-04-29 02:18:09 +08:00
|
|
|
return err;
|
2023-04-19 01:52:06 +08:00
|
|
|
} else if (*blk_addr != NULL_ADDR) {
|
|
|
|
*use_cow = true;
|
2022-04-29 02:18:09 +08:00
|
|
|
return 0;
|
2023-04-19 01:52:06 +08:00
|
|
|
}
|
2022-04-29 02:18:09 +08:00
|
|
|
|
2022-11-12 01:04:06 +08:00
|
|
|
if (is_inode_flag_set(inode, FI_ATOMIC_REPLACE))
|
|
|
|
goto reserve_block;
|
|
|
|
|
2022-04-29 02:18:09 +08:00
|
|
|
/* Look for the block in the original inode */
|
|
|
|
err = __find_data_block(inode, index, &ori_blk_addr);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
2022-07-19 07:02:48 +08:00
|
|
|
reserve_block:
|
2022-04-29 02:18:09 +08:00
|
|
|
/* Finally, we should reserve a new block in COW inode for the update */
|
|
|
|
err = __reserve_data_block(cow_inode, index, blk_addr, node_changed);
|
|
|
|
if (err)
|
|
|
|
return err;
|
2022-07-19 07:02:48 +08:00
|
|
|
inc_atomic_write_cnt(inode);
|
2022-04-29 02:18:09 +08:00
|
|
|
|
|
|
|
if (ori_blk_addr != NULL_ADDR)
|
|
|
|
*blk_addr = ori_blk_addr;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-11-02 16:10:12 +08:00
|
|
|
static int f2fs_write_begin(struct file *file, struct address_space *mapping,
|
2022-02-23 03:31:43 +08:00
|
|
|
loff_t pos, unsigned len, struct page **pagep, void **fsdata)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
|
|
|
struct inode *inode = mapping->host;
|
2014-09-03 06:31:18 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
2015-07-16 04:08:21 +08:00
|
|
|
struct page *page = NULL;
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
|
|
|
pgoff_t index = ((unsigned long long) pos) >> PAGE_SHIFT;
|
2022-04-29 02:18:09 +08:00
|
|
|
bool need_balance = false;
|
2023-04-19 01:52:06 +08:00
|
|
|
bool use_cow = false;
|
2015-12-24 03:55:18 +08:00
|
|
|
block_t blkaddr = NULL_ADDR;
|
2012-11-02 16:10:12 +08:00
|
|
|
int err = 0;
|
|
|
|
|
2022-02-23 03:31:43 +08:00
|
|
|
trace_f2fs_write_begin(inode, pos, len);
|
2014-05-06 16:46:04 +08:00
|
|
|
|
2019-08-23 17:58:36 +08:00
|
|
|
if (!f2fs_is_checkpoint_ready(sbi)) {
|
|
|
|
err = -ENOSPC;
|
2018-08-21 10:21:43 +08:00
|
|
|
goto fail;
|
2019-08-23 17:58:36 +08:00
|
|
|
}
|
2018-08-21 10:21:43 +08:00
|
|
|
|
2014-11-26 02:59:45 +08:00
|
|
|
/*
|
|
|
|
* We should check this at this moment to avoid deadlock on inode page
|
|
|
|
* and #0 page. The locking rule for inline_data conversion should be:
|
|
|
|
* lock_page(page #0) -> lock_page(inode_page)
|
|
|
|
*/
|
|
|
|
if (index != 0) {
|
|
|
|
err = f2fs_convert_inline_inode(inode);
|
|
|
|
if (err)
|
|
|
|
goto fail;
|
|
|
|
}
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
if (f2fs_compressed_file(inode)) {
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
*fsdata = NULL;
|
|
|
|
|
f2fs: fix compressed file start atomic write may cause data corruption
When compressed file has blocks, f2fs_ioc_start_atomic_write will succeed,
but compressed flag will be remained in inode. If write partial compreseed
cluster and commit atomic write will cause data corruption.
This is the reproduction process:
Step 1:
create a compressed file ,write 64K data , call fsync(), then the blocks
are write as compressed cluster.
Step2:
iotcl(F2FS_IOC_START_ATOMIC_WRITE) --- this should be fail, but not.
write page 0 and page 3.
iotcl(F2FS_IOC_COMMIT_ATOMIC_WRITE) -- page 0 and 3 write as normal file,
Step3:
drop cache.
read page 0-4 -- Since page 0 has a valid block address, read as
non-compressed cluster, page 1 and 2 will be filled with compressed data
or zero.
The root cause is, after commit 7eab7a696827 ("f2fs: compress: remove
unneeded read when rewrite whole cluster"), in step 2, f2fs_write_begin()
only set target page dirty, and in f2fs_commit_inmem_pages(), we will write
partial raw pages into compressed cluster, result in corrupting compressed
cluster layout.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 7eab7a696827 ("f2fs: compress: remove unneeded read when rewrite whole cluster")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-03-18 09:23:04 +08:00
|
|
|
if (len == PAGE_SIZE && !(f2fs_is_atomic_file(inode)))
|
2021-06-22 19:50:59 +08:00
|
|
|
goto repeat;
|
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
ret = f2fs_prepare_compress_overwrite(inode, pagep,
|
|
|
|
index, fsdata);
|
|
|
|
if (ret < 0) {
|
|
|
|
err = ret;
|
|
|
|
goto fail;
|
|
|
|
} else if (ret) {
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2013-04-26 10:55:17 +08:00
|
|
|
repeat:
|
2017-02-18 01:55:55 +08:00
|
|
|
/*
|
|
|
|
* Do not use grab_cache_page_write_begin() to avoid deadlock due to
|
|
|
|
* wait_for_stable_page. Will wait that below with our IO control.
|
|
|
|
*/
|
2017-10-28 16:52:30 +08:00
|
|
|
page = f2fs_pagecache_get_page(mapping, index,
|
2017-02-18 01:55:55 +08:00
|
|
|
FGP_LOCK | FGP_WRITE | FGP_CREAT, GFP_NOFS);
|
2014-07-02 13:25:04 +08:00
|
|
|
if (!page) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto fail;
|
|
|
|
}
|
2014-04-30 08:22:45 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
/* TODO: cluster can be compressed due to race with .writepage */
|
|
|
|
|
2012-11-02 16:10:12 +08:00
|
|
|
*pagep = page;
|
|
|
|
|
2022-04-29 02:18:09 +08:00
|
|
|
if (f2fs_is_atomic_file(inode))
|
|
|
|
err = prepare_atomic_write_begin(sbi, page, pos, len,
|
2023-04-19 01:52:06 +08:00
|
|
|
&blkaddr, &need_balance, &use_cow);
|
2022-04-29 02:18:09 +08:00
|
|
|
else
|
|
|
|
err = prepare_write_begin(sbi, page, pos, len,
|
2015-12-24 03:55:18 +08:00
|
|
|
&blkaddr, &need_balance);
|
2014-10-18 11:33:55 +08:00
|
|
|
if (err)
|
2015-12-24 03:55:18 +08:00
|
|
|
goto fail;
|
2014-10-18 11:33:55 +08:00
|
|
|
|
f2fs: guarantee journalled quota data by checkpoint
For journalled quota mode, let checkpoint to flush dquot dirty data
and quota file data to guarntee persistence of all quota sysfile in
last checkpoint, by this way, we can avoid corrupting quota sysfile
when encountering SPO.
The implementation is as below:
1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is
cached dquot metadata changes in quota subsystem, and later checkpoint
should:
a) flush dquot metadata into quota file.
b) flush quota file to storage to keep file usage be consistent.
2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota
operation failed due to -EIO or -ENOSPC, so later,
a) checkpoint will skip syncing dquot metadata.
b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a
hint for fsck repairing.
3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota
data updating is very heavy, it may cause hungtask in block_operation().
To avoid this, if our retry time exceed threshold, let's just skip
flushing and retry in next checkpoint().
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid warnings and set fsck flag]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 20:05:00 +08:00
|
|
|
if (need_balance && !IS_NOQUOTA(inode) &&
|
|
|
|
has_not_enough_free_secs(sbi, 0, 0)) {
|
2015-12-23 05:23:35 +08:00
|
|
|
unlock_page(page);
|
2016-01-08 06:15:04 +08:00
|
|
|
f2fs_balance_fs(sbi, true);
|
2015-12-23 05:23:35 +08:00
|
|
|
lock_page(page);
|
|
|
|
if (page->mapping != mapping) {
|
|
|
|
/* The page got truncated from under us */
|
|
|
|
f2fs_put_page(page, 1);
|
|
|
|
goto repeat;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-12-25 17:43:42 +08:00
|
|
|
f2fs_wait_on_page_writeback(page, DATA, false, true);
|
2014-10-24 10:48:09 +08:00
|
|
|
|
2016-09-07 02:02:03 +08:00
|
|
|
if (len == PAGE_SIZE || PageUptodate(page))
|
|
|
|
return 0;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
|
|
|
if (!(pos & (PAGE_SIZE - 1)) && (pos + len) >= i_size_read(inode) &&
|
|
|
|
!f2fs_verity_in_progress(inode)) {
|
2016-12-20 11:11:35 +08:00
|
|
|
zero_user_segment(page, len, PAGE_SIZE);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-12-24 03:55:18 +08:00
|
|
|
if (blkaddr == NEW_ADDR) {
|
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
|
|
|
zero_user_segment(page, 0, PAGE_SIZE);
|
2016-09-07 02:02:03 +08:00
|
|
|
SetPageUptodate(page);
|
2012-11-02 16:10:12 +08:00
|
|
|
} else {
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
if (!f2fs_is_valid_blkaddr(sbi, blkaddr,
|
|
|
|
DATA_GENERIC_ENHANCE_READ)) {
|
2019-06-20 11:36:14 +08:00
|
|
|
err = -EFSCORRUPTED;
|
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 15:26:32 +08:00
|
|
|
goto fail;
|
|
|
|
}
|
2023-04-19 01:52:06 +08:00
|
|
|
err = f2fs_submit_page_read(use_cow ?
|
|
|
|
F2FS_I(inode)->cow_inode : inode, page,
|
|
|
|
blkaddr, 0, true);
|
2017-09-07 12:04:44 +08:00
|
|
|
if (err)
|
2016-07-03 22:05:11 +08:00
|
|
|
goto fail;
|
2014-03-29 15:30:40 +08:00
|
|
|
|
2013-03-08 20:29:23 +08:00
|
|
|
lock_page(page);
|
2013-12-06 14:00:58 +08:00
|
|
|
if (unlikely(page->mapping != mapping)) {
|
2013-04-26 10:55:17 +08:00
|
|
|
f2fs_put_page(page, 1);
|
|
|
|
goto repeat;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
2016-07-03 22:05:12 +08:00
|
|
|
if (unlikely(!PageUptodate(page))) {
|
|
|
|
err = -EIO;
|
|
|
|
goto fail;
|
2015-04-24 03:04:33 +08:00
|
|
|
}
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
|
|
|
return 0;
|
2014-10-18 11:33:55 +08:00
|
|
|
|
2014-07-02 13:25:04 +08:00
|
|
|
fail:
|
2015-07-16 04:08:21 +08:00
|
|
|
f2fs_put_page(page, 1);
|
2021-07-16 22:39:11 +08:00
|
|
|
f2fs_write_failed(inode, pos + len);
|
2014-07-02 13:25:04 +08:00
|
|
|
return err;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
|
|
|
|
2013-06-27 12:04:08 +08:00
|
|
|
static int f2fs_write_end(struct file *file,
|
|
|
|
struct address_space *mapping,
|
|
|
|
loff_t pos, unsigned len, unsigned copied,
|
|
|
|
struct page *page, void *fsdata)
|
|
|
|
{
|
|
|
|
struct inode *inode = page->mapping->host;
|
|
|
|
|
2014-05-06 16:47:23 +08:00
|
|
|
trace_f2fs_write_end(inode, pos, len, copied);
|
|
|
|
|
2016-09-07 02:02:03 +08:00
|
|
|
/*
|
|
|
|
* This should be come from len == PAGE_SIZE, and we expect copied
|
|
|
|
* should be PAGE_SIZE. Otherwise, we treat it with zero copied and
|
|
|
|
* let generic_perform_write() try to copy data again through copied=0.
|
|
|
|
*/
|
|
|
|
if (!PageUptodate(page)) {
|
2016-12-20 11:11:35 +08:00
|
|
|
if (unlikely(copied != len))
|
2016-09-07 02:02:03 +08:00
|
|
|
copied = 0;
|
|
|
|
else
|
|
|
|
SetPageUptodate(page);
|
|
|
|
}
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
/* overwrite compressed file */
|
|
|
|
if (f2fs_compressed_file(inode) && fsdata) {
|
|
|
|
f2fs_compress_write_end(inode, fsdata, page->index, copied);
|
|
|
|
f2fs_update_time(F2FS_I_SB(inode), REQ_TIME);
|
2020-07-24 18:21:36 +08:00
|
|
|
|
|
|
|
if (pos + copied > i_size_read(inode) &&
|
|
|
|
!f2fs_verity_in_progress(inode))
|
|
|
|
f2fs_i_size_write(inode, pos + copied);
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
return copied;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2016-09-07 02:02:03 +08:00
|
|
|
if (!copied)
|
|
|
|
goto unlock_out;
|
|
|
|
|
2014-10-10 04:19:53 +08:00
|
|
|
set_page_dirty(page);
|
2013-06-27 12:04:08 +08:00
|
|
|
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
|
|
|
if (pos + copied > i_size_read(inode) &&
|
2022-04-29 02:18:09 +08:00
|
|
|
!f2fs_verity_in_progress(inode)) {
|
2016-05-21 00:22:03 +08:00
|
|
|
f2fs_i_size_write(inode, pos + copied);
|
2022-04-29 02:18:09 +08:00
|
|
|
if (f2fs_is_atomic_file(inode))
|
|
|
|
f2fs_i_size_write(F2FS_I(inode)->cow_inode,
|
|
|
|
pos + copied);
|
|
|
|
}
|
2016-09-07 02:02:03 +08:00
|
|
|
unlock_out:
|
2016-08-06 21:09:41 +08:00
|
|
|
f2fs_put_page(page, 1);
|
2016-01-09 08:57:48 +08:00
|
|
|
f2fs_update_time(F2FS_I_SB(inode), REQ_TIME);
|
2013-06-27 12:04:08 +08:00
|
|
|
return copied;
|
|
|
|
}
|
|
|
|
|
2022-02-10 04:21:44 +08:00
|
|
|
void f2fs_invalidate_folio(struct folio *folio, size_t offset, size_t length)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
2022-02-10 04:21:44 +08:00
|
|
|
struct inode *inode = folio->mapping->host;
|
2015-02-05 17:44:29 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
2014-09-13 06:53:45 +08:00
|
|
|
|
2015-02-05 17:44:29 +08:00
|
|
|
if (inode->i_ino >= F2FS_ROOT_INO(sbi) &&
|
2022-02-10 04:21:44 +08:00
|
|
|
(offset || length != folio_size(folio)))
|
2014-09-13 06:53:45 +08:00
|
|
|
return;
|
|
|
|
|
2022-02-10 04:21:44 +08:00
|
|
|
if (folio_test_dirty(folio)) {
|
2016-10-11 22:57:01 +08:00
|
|
|
if (inode->i_ino == F2FS_META_INO(sbi)) {
|
2015-02-05 17:44:29 +08:00
|
|
|
dec_page_count(sbi, F2FS_DIRTY_META);
|
2016-10-11 22:57:01 +08:00
|
|
|
} else if (inode->i_ino == F2FS_NODE_INO(sbi)) {
|
2015-02-05 17:44:29 +08:00
|
|
|
dec_page_count(sbi, F2FS_DIRTY_NODES);
|
2016-10-11 22:57:01 +08:00
|
|
|
} else {
|
2015-02-05 17:44:29 +08:00
|
|
|
inode_dec_dirty_pages(inode);
|
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
|
|
|
f2fs_remove_dirty_inode(inode);
|
2016-10-11 22:57:01 +08:00
|
|
|
}
|
2015-02-05 17:44:29 +08:00
|
|
|
}
|
2023-04-10 10:24:17 +08:00
|
|
|
clear_page_private_all(&folio->page);
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
|
|
|
|
2022-05-01 11:41:46 +08:00
|
|
|
bool f2fs_release_folio(struct folio *folio, gfp_t wait)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
2022-05-01 11:41:46 +08:00
|
|
|
/* If this is dirty folio, keep private data */
|
|
|
|
if (folio_test_dirty(folio))
|
|
|
|
return false;
|
2015-01-31 03:39:08 +08:00
|
|
|
|
2023-04-10 10:24:17 +08:00
|
|
|
clear_page_private_all(&folio->page);
|
2022-05-01 11:41:46 +08:00
|
|
|
return true;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
|
|
|
|
2022-02-10 04:22:07 +08:00
|
|
|
static bool f2fs_dirty_data_folio(struct address_space *mapping,
|
|
|
|
struct folio *folio)
|
2012-11-02 16:10:12 +08:00
|
|
|
{
|
2022-02-10 04:22:07 +08:00
|
|
|
struct inode *inode = mapping->host;
|
2012-11-02 16:10:12 +08:00
|
|
|
|
2024-04-16 15:23:18 +08:00
|
|
|
trace_f2fs_set_page_dirty(folio, DATA);
|
2013-10-24 16:53:29 +08:00
|
|
|
|
2022-02-10 04:22:07 +08:00
|
|
|
if (!folio_test_uptodate(folio))
|
|
|
|
folio_mark_uptodate(folio);
|
|
|
|
BUG_ON(folio_test_swapcache(folio));
|
2014-10-10 04:19:53 +08:00
|
|
|
|
2022-08-31 10:24:40 +08:00
|
|
|
if (filemap_dirty_folio(mapping, folio)) {
|
2022-02-10 04:22:07 +08:00
|
|
|
f2fs_update_dirty_folio(inode, folio);
|
|
|
|
return true;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
2022-03-30 04:22:54 +08:00
|
|
|
return false;
|
2012-11-02 16:10:12 +08:00
|
|
|
}
|
|
|
|
|
2020-03-30 17:13:29 +08:00
|
|
|
|
|
|
|
static sector_t f2fs_bmap_compress(struct inode *inode, sector_t block)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_F2FS_FS_COMPRESSION
|
|
|
|
struct dnode_of_data dn;
|
|
|
|
sector_t start_idx, blknr = 0;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
start_idx = round_down(block, F2FS_I(inode)->i_cluster_size);
|
|
|
|
|
|
|
|
set_new_dnode(&dn, inode, NULL, NULL, 0);
|
|
|
|
ret = f2fs_get_dnode_of_data(&dn, start_idx, LOOKUP_NODE);
|
|
|
|
if (ret)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (dn.data_blkaddr != COMPRESS_ADDR) {
|
|
|
|
dn.ofs_in_node += block - start_idx;
|
|
|
|
blknr = f2fs_data_blkaddr(&dn);
|
|
|
|
if (!__is_valid_data_blkaddr(blknr))
|
|
|
|
blknr = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
f2fs_put_dnode(&dn);
|
|
|
|
return blknr;
|
|
|
|
#else
|
2020-06-28 20:29:38 +08:00
|
|
|
return 0;
|
2020-03-30 17:13:29 +08:00
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2013-01-17 19:30:23 +08:00
|
|
|
static sector_t f2fs_bmap(struct address_space *mapping, sector_t block)
|
|
|
|
{
|
2014-04-22 13:34:01 +08:00
|
|
|
struct inode *inode = mapping->host;
|
2020-06-29 20:13:12 +08:00
|
|
|
sector_t blknr = 0;
|
2014-04-22 13:34:01 +08:00
|
|
|
|
2015-10-20 01:29:51 +08:00
|
|
|
if (f2fs_has_inline_data(inode))
|
2020-06-29 20:13:12 +08:00
|
|
|
goto out;
|
2015-10-20 01:29:51 +08:00
|
|
|
|
|
|
|
/* make sure allocating whole blocks */
|
|
|
|
if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
|
|
|
|
filemap_write_and_wait(mapping);
|
|
|
|
|
2020-08-31 08:24:01 +08:00
|
|
|
/* Block number less than F2FS MAX BLOCKS */
|
2021-01-13 13:21:54 +08:00
|
|
|
if (unlikely(block >= max_file_blocks(inode)))
|
2020-08-31 08:24:01 +08:00
|
|
|
goto out;
|
2020-03-30 17:13:29 +08:00
|
|
|
|
2020-08-31 08:24:01 +08:00
|
|
|
if (f2fs_compressed_file(inode)) {
|
|
|
|
blknr = f2fs_bmap_compress(inode, block);
|
|
|
|
} else {
|
2020-11-25 07:19:10 +08:00
|
|
|
struct f2fs_map_blocks map;
|
|
|
|
|
|
|
|
memset(&map, 0, sizeof(map));
|
|
|
|
map.m_lblk = block;
|
|
|
|
map.m_len = 1;
|
|
|
|
map.m_next_pgofs = NULL;
|
|
|
|
map.m_seg_type = NO_CHECK_TYPE;
|
|
|
|
|
2022-11-28 17:15:20 +08:00
|
|
|
if (!f2fs_map_blocks(inode, &map, F2FS_GET_BLOCK_BMAP))
|
2020-11-25 07:19:10 +08:00
|
|
|
blknr = map.m_pblk;
|
2020-08-31 08:24:01 +08:00
|
|
|
}
|
2020-06-29 20:13:12 +08:00
|
|
|
out:
|
|
|
|
trace_f2fs_bmap(inode, block, blknr);
|
|
|
|
return blknr;
|
2015-02-05 17:54:31 +08:00
|
|
|
}
|
|
|
|
|
2019-07-02 10:15:29 +08:00
|
|
|
#ifdef CONFIG_SWAP
|
2021-05-26 14:29:27 +08:00
|
|
|
static int f2fs_migrate_blocks(struct inode *inode, block_t start_blk,
|
|
|
|
unsigned int blkcnt)
|
|
|
|
{
|
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
|
|
|
unsigned int blkofs;
|
|
|
|
unsigned int blk_per_sec = BLKS_PER_SEC(sbi);
|
2024-02-26 09:32:05 +08:00
|
|
|
unsigned int end_blk = start_blk + blkcnt - 1;
|
2021-05-26 14:29:27 +08:00
|
|
|
unsigned int secidx = start_blk / blk_per_sec;
|
2024-02-14 01:38:12 +08:00
|
|
|
unsigned int end_sec;
|
2021-05-26 14:29:27 +08:00
|
|
|
int ret = 0;
|
|
|
|
|
2024-02-14 01:38:12 +08:00
|
|
|
if (!blkcnt)
|
|
|
|
return 0;
|
2024-02-26 09:32:05 +08:00
|
|
|
end_sec = end_blk / blk_per_sec;
|
2024-02-14 01:38:12 +08:00
|
|
|
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
|
2021-04-14 00:10:37 +08:00
|
|
|
filemap_invalidate_lock(inode->i_mapping);
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
set_inode_flag(inode, FI_ALIGNED_WRITE);
|
2022-02-04 15:19:46 +08:00
|
|
|
set_inode_flag(inode, FI_OPU_WRITE);
|
2021-05-26 14:29:27 +08:00
|
|
|
|
2024-02-14 01:38:12 +08:00
|
|
|
for (; secidx <= end_sec; secidx++) {
|
|
|
|
unsigned int blkofs_end = secidx == end_sec ?
|
2024-02-26 09:32:05 +08:00
|
|
|
end_blk % blk_per_sec : blk_per_sec - 1;
|
2024-02-14 01:38:12 +08:00
|
|
|
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_down_write(&sbi->pin_sem);
|
2021-05-26 14:29:27 +08:00
|
|
|
|
2024-02-14 01:38:12 +08:00
|
|
|
ret = f2fs_allocate_pinning_section(sbi);
|
|
|
|
if (ret) {
|
|
|
|
f2fs_up_write(&sbi->pin_sem);
|
|
|
|
break;
|
|
|
|
}
|
2021-05-26 14:29:27 +08:00
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
set_inode_flag(inode, FI_SKIP_WRITES);
|
2021-05-26 14:29:27 +08:00
|
|
|
|
2024-02-14 01:38:12 +08:00
|
|
|
for (blkofs = 0; blkofs <= blkofs_end; blkofs++) {
|
2021-05-26 14:29:27 +08:00
|
|
|
struct page *page;
|
|
|
|
unsigned int blkidx = secidx * blk_per_sec + blkofs;
|
|
|
|
|
|
|
|
page = f2fs_get_lock_data_page(inode, blkidx, true);
|
|
|
|
if (IS_ERR(page)) {
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_write(&sbi->pin_sem);
|
2021-05-26 14:29:27 +08:00
|
|
|
ret = PTR_ERR(page);
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
|
|
|
|
set_page_dirty(page);
|
|
|
|
f2fs_put_page(page, 1);
|
|
|
|
}
|
|
|
|
|
2022-02-04 15:19:46 +08:00
|
|
|
clear_inode_flag(inode, FI_SKIP_WRITES);
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
ret = filemap_fdatawrite(inode->i_mapping);
|
|
|
|
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_write(&sbi->pin_sem);
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
if (ret)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
done:
|
2022-02-04 15:19:46 +08:00
|
|
|
clear_inode_flag(inode, FI_SKIP_WRITES);
|
|
|
|
clear_inode_flag(inode, FI_OPU_WRITE);
|
2021-05-26 14:29:27 +08:00
|
|
|
clear_inode_flag(inode, FI_ALIGNED_WRITE);
|
|
|
|
|
2021-04-14 00:10:37 +08:00
|
|
|
filemap_invalidate_unlock(inode->i_mapping);
|
2022-01-08 04:48:44 +08:00
|
|
|
f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
|
2021-05-26 14:29:27 +08:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2021-05-26 14:29:26 +08:00
|
|
|
static int check_swap_activate(struct swap_info_struct *sis,
|
2020-10-12 17:06:05 +08:00
|
|
|
struct file *swap_file, sector_t *span)
|
|
|
|
{
|
|
|
|
struct address_space *mapping = swap_file->f_mapping;
|
|
|
|
struct inode *inode = mapping->host;
|
2021-03-01 12:58:44 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
2024-04-29 11:51:42 +08:00
|
|
|
block_t cur_lblock;
|
|
|
|
block_t last_lblock;
|
|
|
|
block_t pblock;
|
|
|
|
block_t lowest_pblock = -1;
|
|
|
|
block_t highest_pblock = 0;
|
2020-10-12 17:06:05 +08:00
|
|
|
int nr_extents = 0;
|
2024-04-29 11:51:42 +08:00
|
|
|
unsigned int nr_pblocks;
|
2021-05-26 14:29:27 +08:00
|
|
|
unsigned int blks_per_sec = BLKS_PER_SEC(sbi);
|
2021-05-12 05:38:47 +08:00
|
|
|
unsigned int not_aligned = 0;
|
2021-03-01 12:58:44 +08:00
|
|
|
int ret = 0;
|
2020-10-12 17:06:05 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Map all the blocks into the extent list. This code doesn't try
|
|
|
|
* to be very smart.
|
|
|
|
*/
|
|
|
|
cur_lblock = 0;
|
2020-11-25 06:55:47 +08:00
|
|
|
last_lblock = bytes_to_blks(inode, i_size_read(inode));
|
2020-10-12 17:06:05 +08:00
|
|
|
|
2021-02-27 20:02:30 +08:00
|
|
|
while (cur_lblock < last_lblock && cur_lblock < sis->max) {
|
2020-11-25 07:19:10 +08:00
|
|
|
struct f2fs_map_blocks map;
|
2021-05-26 14:29:27 +08:00
|
|
|
retry:
|
2020-10-12 17:06:05 +08:00
|
|
|
cond_resched();
|
|
|
|
|
2020-11-25 07:19:10 +08:00
|
|
|
memset(&map, 0, sizeof(map));
|
|
|
|
map.m_lblk = cur_lblock;
|
2021-03-01 12:58:44 +08:00
|
|
|
map.m_len = last_lblock - cur_lblock;
|
|
|
|
map.m_next_pgofs = NULL;
|
|
|
|
map.m_next_extent = NULL;
|
2020-11-25 07:19:10 +08:00
|
|
|
map.m_seg_type = NO_CHECK_TYPE;
|
2021-03-01 12:58:44 +08:00
|
|
|
map.m_may_create = false;
|
2020-10-12 17:06:05 +08:00
|
|
|
|
2022-11-28 17:15:20 +08:00
|
|
|
ret = f2fs_map_blocks(inode, &map, F2FS_GET_BLOCK_FIEMAP);
|
2020-10-12 17:06:05 +08:00
|
|
|
if (ret)
|
2021-03-01 12:58:44 +08:00
|
|
|
goto out;
|
2020-10-12 17:06:05 +08:00
|
|
|
|
|
|
|
/* hole */
|
2021-03-01 12:58:44 +08:00
|
|
|
if (!(map.m_flags & F2FS_MAP_FLAGS)) {
|
2021-05-27 04:05:36 +08:00
|
|
|
f2fs_err(sbi, "Swapfile has holes");
|
2021-05-12 22:38:00 +08:00
|
|
|
ret = -EINVAL;
|
2021-03-01 12:58:44 +08:00
|
|
|
goto out;
|
|
|
|
}
|
2020-10-12 17:06:05 +08:00
|
|
|
|
2020-11-25 07:19:10 +08:00
|
|
|
pblock = map.m_pblk;
|
|
|
|
nr_pblocks = map.m_len;
|
2020-10-12 17:06:05 +08:00
|
|
|
|
2024-04-29 11:51:42 +08:00
|
|
|
if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec ||
|
|
|
|
nr_pblocks % blks_per_sec ||
|
2024-02-14 01:38:12 +08:00
|
|
|
!f2fs_valid_pinned_area(sbi, pblock)) {
|
|
|
|
bool last_extent = false;
|
|
|
|
|
2021-05-12 05:38:47 +08:00
|
|
|
not_aligned++;
|
2021-03-01 12:58:44 +08:00
|
|
|
|
2021-05-26 14:29:27 +08:00
|
|
|
nr_pblocks = roundup(nr_pblocks, blks_per_sec);
|
|
|
|
if (cur_lblock + nr_pblocks > sis->max)
|
|
|
|
nr_pblocks -= blks_per_sec;
|
|
|
|
|
2024-02-14 01:38:12 +08:00
|
|
|
/* this extent is last one */
|
2021-05-26 14:29:27 +08:00
|
|
|
if (!nr_pblocks) {
|
2024-02-14 01:38:12 +08:00
|
|
|
nr_pblocks = last_lblock - cur_lblock;
|
|
|
|
last_extent = true;
|
2021-05-26 14:29:27 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
ret = f2fs_migrate_blocks(inode, cur_lblock,
|
|
|
|
nr_pblocks);
|
2024-02-14 01:38:12 +08:00
|
|
|
if (ret) {
|
|
|
|
if (ret == -ENOENT)
|
|
|
|
ret = -EINVAL;
|
2021-05-26 14:29:27 +08:00
|
|
|
goto out;
|
2024-02-14 01:38:12 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
if (!last_extent)
|
|
|
|
goto retry;
|
2021-05-26 14:29:27 +08:00
|
|
|
}
|
2024-02-14 01:38:12 +08:00
|
|
|
|
2020-10-12 17:06:05 +08:00
|
|
|
if (cur_lblock + nr_pblocks >= sis->max)
|
|
|
|
nr_pblocks = sis->max - cur_lblock;
|
|
|
|
|
|
|
|
if (cur_lblock) { /* exclude the header page */
|
|
|
|
if (pblock < lowest_pblock)
|
|
|
|
lowest_pblock = pblock;
|
|
|
|
if (pblock + nr_pblocks - 1 > highest_pblock)
|
|
|
|
highest_pblock = pblock + nr_pblocks - 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We found a PAGE_SIZE-length, PAGE_SIZE-aligned run of blocks
|
|
|
|
*/
|
|
|
|
ret = add_swap_extent(sis, cur_lblock, nr_pblocks, pblock);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
nr_extents += ret;
|
|
|
|
cur_lblock += nr_pblocks;
|
|
|
|
}
|
|
|
|
ret = nr_extents;
|
|
|
|
*span = 1 + highest_pblock - lowest_pblock;
|
|
|
|
if (cur_lblock == 0)
|
|
|
|
cur_lblock = 1; /* force Empty message */
|
|
|
|
sis->max = cur_lblock;
|
|
|
|
sis->pages = cur_lblock - 1;
|
|
|
|
sis->highest_bit = cur_lblock - 1;
|
|
|
|
out:
|
2021-05-26 14:29:27 +08:00
|
|
|
if (not_aligned)
|
2023-10-03 07:09:35 +08:00
|
|
|
f2fs_warn(sbi, "Swapfile (%u) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(%lu * N)",
|
2021-05-26 14:29:27 +08:00
|
|
|
not_aligned, blks_per_sec * F2FS_BLKSIZE);
|
2020-10-12 17:06:05 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2019-07-02 10:15:29 +08:00
|
|
|
static int f2fs_swap_activate(struct swap_info_struct *sis, struct file *file,
|
|
|
|
sector_t *span)
|
|
|
|
{
|
|
|
|
struct inode *inode = file_inode(file);
|
2024-02-14 01:38:12 +08:00
|
|
|
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
|
2019-07-02 10:15:29 +08:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!S_ISREG(inode->i_mode))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2024-02-14 01:38:12 +08:00
|
|
|
if (f2fs_readonly(sbi->sb))
|
2019-07-02 10:15:29 +08:00
|
|
|
return -EROFS;
|
|
|
|
|
2024-02-14 01:38:12 +08:00
|
|
|
if (f2fs_lfs_mode(sbi) && !f2fs_sb_has_blkzoned(sbi)) {
|
|
|
|
f2fs_err(sbi, "Swapfile not supported in LFS mode");
|
2021-05-10 19:24:44 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2019-07-02 10:15:29 +08:00
|
|
|
ret = f2fs_convert_inline_inode(inode);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2020-09-08 10:44:11 +08:00
|
|
|
if (!f2fs_disable_compressed_file(inode))
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2024-02-14 01:38:12 +08:00
|
|
|
ret = filemap_fdatawrite(inode->i_mapping);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2024-02-26 09:32:06 +08:00
|
|
|
f2fs_precache_extents(inode);
|
|
|
|
|
2019-12-27 18:44:56 +08:00
|
|
|
ret = check_swap_activate(sis, file, span);
|
|
|
|
if (ret < 0)
|
2019-07-02 10:15:29 +08:00
|
|
|
return ret;
|
|
|
|
|
2022-10-04 09:11:33 +08:00
|
|
|
stat_inc_swapfile_inode(inode);
|
2019-07-02 10:15:29 +08:00
|
|
|
set_inode_flag(inode, FI_PIN_FILE);
|
2024-02-14 01:38:12 +08:00
|
|
|
f2fs_update_time(sbi, REQ_TIME);
|
2019-12-27 18:44:56 +08:00
|
|
|
return ret;
|
2019-07-02 10:15:29 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void f2fs_swap_deactivate(struct file *file)
|
|
|
|
{
|
|
|
|
struct inode *inode = file_inode(file);
|
|
|
|
|
2022-10-04 09:11:33 +08:00
|
|
|
stat_dec_swapfile_inode(inode);
|
2019-07-02 10:15:29 +08:00
|
|
|
clear_inode_flag(inode, FI_PIN_FILE);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static int f2fs_swap_activate(struct swap_info_struct *sis, struct file *file,
|
|
|
|
sector_t *span)
|
|
|
|
{
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void f2fs_swap_deactivate(struct file *file)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2012-11-02 16:10:12 +08:00
|
|
|
const struct address_space_operations f2fs_dblock_aops = {
|
2022-04-29 23:12:16 +08:00
|
|
|
.read_folio = f2fs_read_data_folio,
|
2020-06-02 12:47:23 +08:00
|
|
|
.readahead = f2fs_readahead,
|
2012-11-02 16:10:12 +08:00
|
|
|
.writepage = f2fs_write_data_page,
|
|
|
|
.writepages = f2fs_write_data_pages,
|
|
|
|
.write_begin = f2fs_write_begin,
|
2013-06-27 12:04:08 +08:00
|
|
|
.write_end = f2fs_write_end,
|
2022-02-10 04:22:07 +08:00
|
|
|
.dirty_folio = f2fs_dirty_data_folio,
|
2022-06-06 22:47:21 +08:00
|
|
|
.migrate_folio = filemap_migrate_folio,
|
2022-02-10 04:21:44 +08:00
|
|
|
.invalidate_folio = f2fs_invalidate_folio,
|
2022-05-01 11:41:46 +08:00
|
|
|
.release_folio = f2fs_release_folio,
|
2013-01-17 19:30:23 +08:00
|
|
|
.bmap = f2fs_bmap,
|
2019-07-02 10:15:29 +08:00
|
|
|
.swap_activate = f2fs_swap_activate,
|
|
|
|
.swap_deactivate = f2fs_swap_deactivate,
|
2012-11-02 16:10:12 +08:00
|
|
|
};
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
|
2017-12-05 09:25:25 +08:00
|
|
|
void f2fs_clear_page_cache_dirty_tag(struct page *page)
|
2018-05-26 18:03:35 +08:00
|
|
|
{
|
2024-04-24 06:55:33 +08:00
|
|
|
struct folio *folio = page_folio(page);
|
|
|
|
struct address_space *mapping = folio->mapping;
|
2018-05-26 18:03:35 +08:00
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
xa_lock_irqsave(&mapping->i_pages, flags);
|
2024-04-24 06:55:33 +08:00
|
|
|
__xa_clear_mark(&mapping->i_pages, folio->index,
|
2018-05-26 18:03:35 +08:00
|
|
|
PAGECACHE_TAG_DIRTY);
|
|
|
|
xa_unlock_irqrestore(&mapping->i_pages, flags);
|
|
|
|
}
|
|
|
|
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
int __init f2fs_init_post_read_processing(void)
|
|
|
|
{
|
f2fs: add fs-verity support
Add fs-verity support to f2fs. fs-verity is a filesystem feature that
enables transparent integrity protection and authentication of read-only
files. It uses a dm-verity like mechanism at the file level: a Merkle
tree is used to verify any block in the file in log(filesize) time. It
is implemented mainly by helper functions in fs/verity/. See
Documentation/filesystems/fsverity.rst for the full documentation.
The f2fs support for fs-verity consists of:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->readpages() to verify data as it's read from verity files
and to support reading verity metadata pages.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first 64K
boundary beyond i_size. This approach works because (a) verity files
are readonly, and (b) pages fully beyond i_size aren't visible to
userspace but can be read/written internally by f2fs with only some
relatively small changes to f2fs. Extended attributes cannot be used
because (a) f2fs limits the total size of an inode's xattr entries to
4096 bytes, which wouldn't be enough for even a single Merkle tree
block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity
metadata *must* be encrypted when the file is because it contains hashes
of the plaintext data.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
|
|
|
bio_post_read_ctx_cache =
|
|
|
|
kmem_cache_create("f2fs_bio_post_read_ctx",
|
|
|
|
sizeof(struct bio_post_read_ctx), 0, 0, NULL);
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
if (!bio_post_read_ctx_cache)
|
|
|
|
goto fail;
|
|
|
|
bio_post_read_ctx_pool =
|
|
|
|
mempool_create_slab_pool(NUM_PREALLOC_POST_READ_CTXS,
|
|
|
|
bio_post_read_ctx_cache);
|
|
|
|
if (!bio_post_read_ctx_pool)
|
|
|
|
goto fail_free_cache;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail_free_cache:
|
|
|
|
kmem_cache_destroy(bio_post_read_ctx_cache);
|
|
|
|
fail:
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
void f2fs_destroy_post_read_processing(void)
|
f2fs: refactor read path to allow multiple postprocessing steps
Currently f2fs's ->readpage() and ->readpages() assume that either the
data undergoes no postprocessing, or decryption only. But with
fs-verity, there will be an additional authenticity verification step,
and it may be needed either by itself, or combined with decryption.
To support this, store a 'struct bio_post_read_ctx' in ->bi_private
which contains a work struct, a bitmask of postprocessing steps that are
enabled, and an indicator of the current step. The bio completion
routine, if there was no I/O error, enqueues the first postprocessing
step. When that completes, it continues to the next step. Pages that
fail any postprocessing step have PageError set. Once all steps have
completed, pages without PageError set are set Uptodate, and all pages
are unlocked.
Also replace f2fs_encrypted_file() with a new function
f2fs_post_read_required() in places like direct I/O and garbage
collection that really should be testing whether the file needs special
I/O processing, not whether it is encrypted specifically.
This may also be useful for other future f2fs features such as
compression.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-19 02:09:48 +08:00
|
|
|
{
|
|
|
|
mempool_destroy(bio_post_read_ctx_pool);
|
|
|
|
kmem_cache_destroy(bio_post_read_ctx_cache);
|
|
|
|
}
|
2019-09-30 18:53:25 +08:00
|
|
|
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
int f2fs_init_post_read_wq(struct f2fs_sb_info *sbi)
|
|
|
|
{
|
|
|
|
if (!f2fs_sb_has_encrypt(sbi) &&
|
|
|
|
!f2fs_sb_has_verity(sbi) &&
|
|
|
|
!f2fs_sb_has_compression(sbi))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
sbi->post_read_wq = alloc_workqueue("f2fs_post_read_wq",
|
|
|
|
WQ_UNBOUND | WQ_HIGHPRI,
|
|
|
|
num_online_cpus());
|
2022-11-25 19:47:36 +08:00
|
|
|
return sbi->post_read_wq ? 0 : -ENOMEM;
|
f2fs: support data compression
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
void f2fs_destroy_post_read_wq(struct f2fs_sb_info *sbi)
|
|
|
|
{
|
|
|
|
if (sbi->post_read_wq)
|
|
|
|
destroy_workqueue(sbi->post_read_wq);
|
|
|
|
}
|
|
|
|
|
2019-09-30 18:53:25 +08:00
|
|
|
int __init f2fs_init_bio_entry_cache(void)
|
|
|
|
{
|
2020-02-17 17:46:20 +08:00
|
|
|
bio_entry_slab = f2fs_kmem_cache_create("f2fs_bio_entry_slab",
|
2019-09-30 18:53:25 +08:00
|
|
|
sizeof(struct bio_entry));
|
2022-11-25 19:47:36 +08:00
|
|
|
return bio_entry_slab ? 0 : -ENOMEM;
|
2019-09-30 18:53:25 +08:00
|
|
|
}
|
|
|
|
|
2019-12-04 09:52:58 +08:00
|
|
|
void f2fs_destroy_bio_entry_cache(void)
|
2019-09-30 18:53:25 +08:00
|
|
|
{
|
|
|
|
kmem_cache_destroy(bio_entry_slab);
|
|
|
|
}
|
2021-07-23 15:59:20 +08:00
|
|
|
|
|
|
|
static int f2fs_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
|
|
|
|
unsigned int flags, struct iomap *iomap,
|
|
|
|
struct iomap *srcmap)
|
|
|
|
{
|
|
|
|
struct f2fs_map_blocks map = {};
|
|
|
|
pgoff_t next_pgofs = 0;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
map.m_lblk = bytes_to_blks(inode, offset);
|
|
|
|
map.m_len = bytes_to_blks(inode, offset + length - 1) - map.m_lblk + 1;
|
|
|
|
map.m_next_pgofs = &next_pgofs;
|
2024-04-26 17:33:48 +08:00
|
|
|
map.m_seg_type = f2fs_rw_hint_to_seg_type(F2FS_I_SB(inode),
|
|
|
|
inode->i_write_hint);
|
2021-07-23 15:59:20 +08:00
|
|
|
if (flags & IOMAP_WRITE)
|
|
|
|
map.m_may_create = true;
|
|
|
|
|
2022-11-28 17:15:20 +08:00
|
|
|
err = f2fs_map_blocks(inode, &map, F2FS_GET_BLOCK_DIO);
|
2021-07-23 15:59:20 +08:00
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
iomap->offset = blks_to_bytes(inode, map.m_lblk);
|
|
|
|
|
f2fs: support direct I/O with fscrypt using blk-crypto
Encrypted files traditionally haven't supported DIO, due to the need to
encrypt/decrypt the data. However, when the encryption is implemented
using inline encryption (blk-crypto) instead of the traditional
filesystem-layer encryption, it is straightforward to support DIO.
Therefore, make f2fs support DIO on files that are using inline
encryption. Since f2fs uses iomap for DIO, and fscrypt support was
already added to iomap DIO, this just requires two small changes:
- Let DIO proceed when supported, by checking fscrypt_dio_supported()
instead of assuming that encrypted files never support DIO.
- In f2fs_iomap_begin(), use fscrypt_limit_io_blocks() to limit the
length of the mapping in the rare case where a DUN discontiguity
occurs in the middle of an extent. The iomap DIO implementation
requires this, since it assumes that it can submit a bio covering (up
to) the whole mapping, without checking fscrypt constraints itself.
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Link: https://lore.kernel.org/r/20220128233940.79464-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2022-01-29 07:39:39 +08:00
|
|
|
/*
|
|
|
|
* When inline encryption is enabled, sometimes I/O to an encrypted file
|
|
|
|
* has to be broken up to guarantee DUN contiguity. Handle this by
|
|
|
|
* limiting the length of the mapping returned.
|
|
|
|
*/
|
|
|
|
map.m_len = fscrypt_limit_io_blocks(inode, map.m_lblk, map.m_len);
|
|
|
|
|
2022-11-28 17:15:09 +08:00
|
|
|
/*
|
|
|
|
* We should never see delalloc or compressed extents here based on
|
|
|
|
* prior flushing and checks.
|
|
|
|
*/
|
|
|
|
if (WARN_ON_ONCE(map.m_pblk == COMPRESS_ADDR))
|
|
|
|
return -EINVAL;
|
2021-07-23 15:59:20 +08:00
|
|
|
|
f2fs: multidev: fix to recognize valid zero block address
As reported by Yi Zhang in mailing list [1], kernel warning was catched
during zbd/010 test as below:
./check zbd/010
zbd/010 (test gap zone support with F2FS) [failed]
runtime ... 3.752s
something found in dmesg:
[ 4378.146781] run blktests zbd/010 at 2024-02-18 11:31:13
[ 4378.192349] null_blk: module loaded
[ 4378.209860] null_blk: disk nullb0 created
[ 4378.413285] scsi_debug:sdebug_driver_probe: scsi_debug: trim
poll_queues to 0. poll_q/nr_hw = (0/1)
[ 4378.422334] scsi host15: scsi_debug: version 0191 [20210520]
dev_size_mb=1024, opts=0x0, submit_queues=1, statistics=0
[ 4378.434922] scsi 15:0:0:0: Direct-Access-ZBC Linux
scsi_debug 0191 PQ: 0 ANSI: 7
[ 4378.443343] scsi 15:0:0:0: Power-on or device reset occurred
[ 4378.449371] sd 15:0:0:0: Attached scsi generic sg5 type 20
[ 4378.449418] sd 15:0:0:0: [sdf] Host-managed zoned block device
...
(See '/mnt/tests/gitlab.com/api/v4/projects/19168116/repository/archive.zip/storage/blktests/blk/blktests/results/nodev/zbd/010.dmesg'
WARNING: CPU: 22 PID: 44011 at fs/iomap/iter.c:51
CPU: 22 PID: 44011 Comm: fio Not tainted 6.8.0-rc3+ #1
RIP: 0010:iomap_iter+0x32b/0x350
Call Trace:
<TASK>
__iomap_dio_rw+0x1df/0x830
f2fs_file_read_iter+0x156/0x3d0 [f2fs]
aio_read+0x138/0x210
io_submit_one+0x188/0x8c0
__x64_sys_io_submit+0x8c/0x1a0
do_syscall_64+0x86/0x170
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Shinichiro Kawasaki helps to analyse this issue and proposes a potential
fixing patch in [2].
Quoted from reply of Shinichiro Kawasaki:
"I confirmed that the trigger commit is dbf8e63f48af as Yi reported. I took a
look in the commit, but it looks fine to me. So I thought the cause is not
in the commit diff.
I found the WARN is printed when the f2fs is set up with multiple devices,
and read requests are mapped to the very first block of the second device in the
direct read path. In this case, f2fs_map_blocks() and f2fs_map_blocks_cached()
modify map->m_pblk as the physical block address from each block device. It
becomes zero when it is mapped to the first block of the device. However,
f2fs_iomap_begin() assumes that map->m_pblk is the physical block address of the
whole f2fs, across the all block devices. It compares map->m_pblk against
NULL_ADDR == 0, then go into the unexpected branch and sets the invalid
iomap->length. The WARN catches the invalid iomap->length.
This WARN is printed even for non-zoned block devices, by following steps.
- Create two (non-zoned) null_blk devices memory backed with 128MB size each:
nullb0 and nullb1.
# mkfs.f2fs /dev/nullb0 -c /dev/nullb1
# mount -t f2fs /dev/nullb0 "${mount_dir}"
# dd if=/dev/zero of="${mount_dir}/test.dat" bs=1M count=192
# dd if="${mount_dir}/test.dat" of=/dev/null bs=1M count=192 iflag=direct
..."
So, the root cause of this issue is: when multi-devices feature is on,
f2fs_map_blocks() may return zero blkaddr in non-primary device, which is
a verified valid block address, however, f2fs_iomap_begin() treats it as
an invalid block address, and then it triggers the warning in iomap
framework code.
Finally, as discussed, we decide to use a more simple and direct way that
checking (map.m_flags & F2FS_MAP_MAPPED) condition instead of
(map.m_pblk != NULL_ADDR) to fix this issue.
Thanks a lot for the effort of Yi Zhang and Shinichiro Kawasaki on this
issue.
[1] https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/
[2] https://lore.kernel.org/linux-f2fs-devel/gngdj77k4picagsfdtiaa7gpgnup6fsgwzsltx6milmhegmjff@iax2n4wvrqye/
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 1517c1a7a445 ("f2fs: implement iomap operations")
Fixes: 8d3c1fa3fa5e ("f2fs: don't rely on F2FS_MAP_* in f2fs_iomap_begin")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2024-03-27 15:42:23 +08:00
|
|
|
if (map.m_flags & F2FS_MAP_MAPPED) {
|
f2fs: support to map continuous holes or preallocated address
This patch supports to map continuous holes or preallocated addresses
to improve performace of lookuping mapping info during read DIO.
[testcase 1]
xfs_io -f /mnt/f2fs/hole -c "truncate 1m" -c "fsync"
xfs_io -d /mnt/f2fs/hole -c "pread -b 1m 0 1m"
[before]
f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
......
f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576
[after]
f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x100, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576
[testcase 2]
xfs_io -f /mnt/f2fs/preallocated -c "falloc 0 1m" -c "fsync"
xfs_io -d /mnt/f2fs/preallocated -c "pread -b 1m 0 1m"
[before]
f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
......
f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576
[after]
f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0xffffffff, len = 0x100, flags = 4, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2024-03-25 23:27:26 +08:00
|
|
|
if (WARN_ON_ONCE(map.m_pblk == NEW_ADDR))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2022-11-28 17:15:09 +08:00
|
|
|
iomap->length = blks_to_bytes(inode, map.m_len);
|
|
|
|
iomap->type = IOMAP_MAPPED;
|
|
|
|
iomap->flags |= IOMAP_F_MERGED;
|
2021-07-23 15:59:20 +08:00
|
|
|
iomap->bdev = map.m_bdev;
|
|
|
|
iomap->addr = blks_to_bytes(inode, map.m_pblk);
|
|
|
|
} else {
|
2022-11-28 17:15:09 +08:00
|
|
|
if (flags & IOMAP_WRITE)
|
|
|
|
return -ENOTBLK;
|
f2fs: support to map continuous holes or preallocated address
This patch supports to map continuous holes or preallocated addresses
to improve performace of lookuping mapping info during read DIO.
[testcase 1]
xfs_io -f /mnt/f2fs/hole -c "truncate 1m" -c "fsync"
xfs_io -d /mnt/f2fs/hole -c "pread -b 1m 0 1m"
[before]
f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
......
f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576
[after]
f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x100, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576
[testcase 2]
xfs_io -f /mnt/f2fs/preallocated -c "falloc 0 1m" -c "fsync"
xfs_io -d /mnt/f2fs/preallocated -c "pread -b 1m 0 1m"
[before]
f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
......
f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576
[after]
f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0
f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0xffffffff, len = 0x100, flags = 4, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0
f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2024-03-25 23:27:26 +08:00
|
|
|
|
|
|
|
if (map.m_pblk == NULL_ADDR) {
|
|
|
|
iomap->length = blks_to_bytes(inode, next_pgofs) -
|
|
|
|
iomap->offset;
|
|
|
|
iomap->type = IOMAP_HOLE;
|
|
|
|
} else if (map.m_pblk == NEW_ADDR) {
|
|
|
|
iomap->length = blks_to_bytes(inode, map.m_len);
|
|
|
|
iomap->type = IOMAP_UNWRITTEN;
|
|
|
|
} else {
|
|
|
|
f2fs_bug_on(F2FS_I_SB(inode), 1);
|
|
|
|
}
|
2021-07-23 15:59:20 +08:00
|
|
|
iomap->addr = IOMAP_NULL_ADDR;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (map.m_flags & F2FS_MAP_NEW)
|
|
|
|
iomap->flags |= IOMAP_F_NEW;
|
|
|
|
if ((inode->i_state & I_DIRTY_DATASYNC) ||
|
|
|
|
offset + length > i_size_read(inode))
|
|
|
|
iomap->flags |= IOMAP_F_DIRTY;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
const struct iomap_ops f2fs_iomap_ops = {
|
|
|
|
.iomap_begin = f2fs_iomap_begin,
|
|
|
|
};
|