linux/drivers/scsi/qla2xxx/qla_iocb.c

3413 lines
90 KiB
C
Raw Normal View History

/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2014 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:28 +08:00
#include "qla_target.h"
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_tcq.h>
/**
* qla2x00_get_cmd_direction() - Determine control_flag data direction.
* @cmd: SCSI command
*
* Returns the proper CF_* direction based on CDB.
*/
static inline uint16_t
qla2x00_get_cmd_direction(srb_t *sp)
{
uint16_t cflags;
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
struct scsi_qla_host *vha = sp->vha;
cflags = 0;
/* Set transfer direction */
if (cmd->sc_data_direction == DMA_TO_DEVICE) {
cflags = CF_WRITE;
vha->qla_stats.output_bytes += scsi_bufflen(cmd);
vha->qla_stats.output_requests++;
} else if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
cflags = CF_READ;
vha->qla_stats.input_bytes += scsi_bufflen(cmd);
vha->qla_stats.input_requests++;
}
return (cflags);
}
/**
* qla2x00_calc_iocbs_32() - Determine number of Command Type 2 and
* Continuation Type 0 IOCBs to allocate.
*
* @dsds: number of data segment decriptors needed
*
* Returns the number of IOCB entries needed to store @dsds.
*/
uint16_t
qla2x00_calc_iocbs_32(uint16_t dsds)
{
uint16_t iocbs;
iocbs = 1;
if (dsds > 3) {
iocbs += (dsds - 3) / 7;
if ((dsds - 3) % 7)
iocbs++;
}
return (iocbs);
}
/**
* qla2x00_calc_iocbs_64() - Determine number of Command Type 3 and
* Continuation Type 1 IOCBs to allocate.
*
* @dsds: number of data segment decriptors needed
*
* Returns the number of IOCB entries needed to store @dsds.
*/
uint16_t
qla2x00_calc_iocbs_64(uint16_t dsds)
{
uint16_t iocbs;
iocbs = 1;
if (dsds > 2) {
iocbs += (dsds - 2) / 5;
if ((dsds - 2) % 5)
iocbs++;
}
return (iocbs);
}
/**
* qla2x00_prep_cont_type0_iocb() - Initialize a Continuation Type 0 IOCB.
* @ha: HA context
*
* Returns a pointer to the Continuation Type 0 IOCB packet.
*/
static inline cont_entry_t *
qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha)
{
cont_entry_t *cont_pkt;
struct req_que *req = vha->req;
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else {
req->ring_ptr++;
}
cont_pkt = (cont_entry_t *)req->ring_ptr;
/* Load packet defaults. */
*((uint32_t *)(&cont_pkt->entry_type)) = cpu_to_le32(CONTINUE_TYPE);
return (cont_pkt);
}
/**
* qla2x00_prep_cont_type1_iocb() - Initialize a Continuation Type 1 IOCB.
* @ha: HA context
*
* Returns a pointer to the continuation type 1 IOCB packet.
*/
static inline cont_a64_entry_t *
qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha, struct req_que *req)
{
cont_a64_entry_t *cont_pkt;
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else {
req->ring_ptr++;
}
cont_pkt = (cont_a64_entry_t *)req->ring_ptr;
/* Load packet defaults. */
*((uint32_t *)(&cont_pkt->entry_type)) = IS_QLAFX00(vha->hw) ?
cpu_to_le32(CONTINUE_A64_TYPE_FX00) :
cpu_to_le32(CONTINUE_A64_TYPE);
return (cont_pkt);
}
inline int
qla24xx_configure_prot_mode(srb_t *sp, uint16_t *fw_prot_opts)
{
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
uint8_t guard = scsi_host_get_guard(cmd->device->host);
/* We always use DIFF Bundling for best performance */
*fw_prot_opts = 0;
/* Translate SCSI opcode to a protection opcode */
switch (scsi_get_prot_op(cmd)) {
case SCSI_PROT_READ_STRIP:
*fw_prot_opts |= PO_MODE_DIF_REMOVE;
break;
case SCSI_PROT_WRITE_INSERT:
*fw_prot_opts |= PO_MODE_DIF_INSERT;
break;
case SCSI_PROT_READ_INSERT:
*fw_prot_opts |= PO_MODE_DIF_INSERT;
break;
case SCSI_PROT_WRITE_STRIP:
*fw_prot_opts |= PO_MODE_DIF_REMOVE;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
if (guard & SHOST_DIX_GUARD_IP)
*fw_prot_opts |= PO_MODE_DIF_TCP_CKSUM;
else
*fw_prot_opts |= PO_MODE_DIF_PASS;
break;
default: /* Normal Request */
*fw_prot_opts |= PO_MODE_DIF_PASS;
break;
}
return scsi_prot_sg_count(cmd);
}
/*
* qla2x00_build_scsi_iocbs_32() - Build IOCB command utilizing 32bit
* capable IOCB types.
*
* @sp: SRB command to process
* @cmd_pkt: Command type 2 IOCB
* @tot_dsds: Total number of segments to transfer
*/
void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
uint16_t tot_dsds)
{
uint16_t avail_dsds;
uint32_t *cur_dsd;
scsi_qla_host_t *vha;
struct scsi_cmnd *cmd;
struct scatterlist *sg;
int i;
cmd = GET_CMD_SP(sp);
/* Update entry type to indicate Command Type 2 IOCB */
*((uint32_t *)(&cmd_pkt->entry_type)) =
cpu_to_le32(COMMAND_TYPE);
/* No data transfer */
if (!scsi_bufflen(cmd) || cmd->sc_data_direction == DMA_NONE) {
cmd_pkt->byte_count = cpu_to_le32(0);
return;
}
vha = sp->vha;
cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
/* Three DSDs are available in the Command Type 2 IOCB */
avail_dsds = 3;
cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address;
/* Load data segments */
scsi_for_each_sg(cmd, sg, tot_dsds, i) {
cont_entry_t *cont_pkt;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
/*
* Seven DSDs are available in the Continuation
* Type 0 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type0_iocb(vha);
cur_dsd = (uint32_t *)&cont_pkt->dseg_0_address;
avail_dsds = 7;
}
*cur_dsd++ = cpu_to_le32(sg_dma_address(sg));
*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
avail_dsds--;
}
}
/**
* qla2x00_build_scsi_iocbs_64() - Build IOCB command utilizing 64bit
* capable IOCB types.
*
* @sp: SRB command to process
* @cmd_pkt: Command type 3 IOCB
* @tot_dsds: Total number of segments to transfer
*/
void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
uint16_t tot_dsds)
{
uint16_t avail_dsds;
uint32_t *cur_dsd;
scsi_qla_host_t *vha;
struct scsi_cmnd *cmd;
struct scatterlist *sg;
int i;
cmd = GET_CMD_SP(sp);
/* Update entry type to indicate Command Type 3 IOCB */
*((uint32_t *)(&cmd_pkt->entry_type)) = cpu_to_le32(COMMAND_A64_TYPE);
/* No data transfer */
if (!scsi_bufflen(cmd) || cmd->sc_data_direction == DMA_NONE) {
cmd_pkt->byte_count = cpu_to_le32(0);
return;
}
vha = sp->vha;
cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
/* Two DSDs are available in the Command Type 3 IOCB */
avail_dsds = 2;
cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address;
/* Load data segments */
scsi_for_each_sg(cmd, sg, tot_dsds, i) {
dma_addr_t sle_dma;
cont_a64_entry_t *cont_pkt;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
/*
* Five DSDs are available in the Continuation
* Type 1 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req);
cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
avail_dsds = 5;
}
sle_dma = sg_dma_address(sg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
avail_dsds--;
}
}
/**
* qla2x00_start_scsi() - Send a SCSI command to the ISP
* @sp: command to send to the ISP
*
* Returns non-zero if a failure occurred, else zero.
*/
int
qla2x00_start_scsi(srb_t *sp)
{
int nseg;
unsigned long flags;
scsi_qla_host_t *vha;
struct scsi_cmnd *cmd;
uint32_t *clr_ptr;
uint32_t index;
uint32_t handle;
cmd_entry_t *cmd_pkt;
uint16_t cnt;
uint16_t req_cnt;
uint16_t tot_dsds;
struct device_reg_2xxx __iomem *reg;
struct qla_hw_data *ha;
struct req_que *req;
struct rsp_que *rsp;
/* Setup device pointers. */
vha = sp->vha;
ha = vha->hw;
reg = &ha->iobase->isp;
cmd = GET_CMD_SP(sp);
req = ha->req_q_map[0];
rsp = ha->rsp_q_map[0];
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
/* Send marker if required */
if (vha->marker_needed != 0) {
if (qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL) !=
QLA_SUCCESS) {
return (QLA_FUNCTION_FAILED);
}
vha->marker_needed = 0;
}
/* Acquire ring specific lock */
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
if (index == req->num_outstanding_cmds)
goto queuing_error;
/* Map the sg table so we have an accurate count of sg entries needed */
if (scsi_sg_count(cmd)) {
nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd),
scsi_sg_count(cmd), cmd->sc_data_direction);
if (unlikely(!nseg))
goto queuing_error;
} else
nseg = 0;
tot_dsds = nseg;
/* Calculate the number of request entries needed. */
req_cnt = ha->isp_ops->calc_req_entries(tot_dsds);
if (req->cnt < (req_cnt + 2)) {
cnt = RD_REG_WORD_RELAXED(ISP_REQ_Q_OUT(ha, reg));
if (req->ring_index < cnt)
req->cnt = cnt - req->ring_index;
else
req->cnt = req->length -
(req->ring_index - cnt);
/* If still no head room then bail out */
if (req->cnt < (req_cnt + 2))
goto queuing_error;
}
/* Build command packet */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
sp->handle = handle;
cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
cmd_pkt = (cmd_entry_t *)req->ring_ptr;
cmd_pkt->handle = handle;
/* Zero out remaining portion of packet. */
clr_ptr = (uint32_t *)cmd_pkt + 2;
memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
cmd_pkt->dseg_count = cpu_to_le16(tot_dsds);
/* Set target ID and LUN number*/
SET_TARGET_ID(ha, cmd_pkt->target, sp->fcport->loop_id);
cmd_pkt->lun = cpu_to_le16(cmd->device->lun);
cmd_pkt->control_flags = cpu_to_le16(CF_SIMPLE_TAG);
/* Load SCSI command packet. */
memcpy(cmd_pkt->scsi_cdb, cmd->cmnd, cmd->cmd_len);
cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd));
/* Build IOCB segments */
ha->isp_ops->build_iocbs(sp, cmd_pkt, tot_dsds);
/* Set total data segment count. */
cmd_pkt->entry_count = (uint8_t)req_cnt;
wmb();
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else
req->ring_ptr++;
sp->flags |= SRB_DMA_VALID;
/* Set chip new ring index. */
WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), req->ring_index);
RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, reg)); /* PCI Posting. */
/* Manage unprocessed RIO/ZIO commands in response queue. */
if (vha->flags.process_response_queue &&
rsp->ring_ptr->signature != RESPONSE_PROCESSED)
qla2x00_process_response_queue(rsp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return (QLA_SUCCESS);
queuing_error:
if (tot_dsds)
scsi_dma_unmap(cmd);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return (QLA_FUNCTION_FAILED);
}
/**
* qla2x00_start_iocbs() - Execute the IOCB command
*/
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:28 +08:00
void
qla2x00_start_iocbs(struct scsi_qla_host *vha, struct req_que *req)
{
struct qla_hw_data *ha = vha->hw;
device_reg_t *reg = ISP_QUE_REG(ha, req->id);
if (IS_P3P_TYPE(ha)) {
qla82xx_start_iocbs(vha);
} else {
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else
req->ring_ptr++;
/* Set chip new ring index. */
if (ha->mqenable || IS_QLA27XX(ha)) {
WRT_REG_DWORD(req->req_q_in, req->ring_index);
} else if (IS_QLA83XX(ha)) {
WRT_REG_DWORD(req->req_q_in, req->ring_index);
RD_REG_DWORD_RELAXED(&ha->iobase->isp24.hccr);
} else if (IS_QLAFX00(ha)) {
WRT_REG_DWORD(&reg->ispfx00.req_q_in, req->ring_index);
RD_REG_DWORD_RELAXED(&reg->ispfx00.req_q_in);
QLAFX00_SET_HST_INTR(ha, ha->rqstq_intr_code);
} else if (IS_FWI2_CAPABLE(ha)) {
WRT_REG_DWORD(&reg->isp24.req_q_in, req->ring_index);
RD_REG_DWORD_RELAXED(&reg->isp24.req_q_in);
} else {
WRT_REG_WORD(ISP_REQ_Q_IN(ha, &reg->isp),
req->ring_index);
RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, &reg->isp));
}
}
}
/**
* qla2x00_marker() - Send a marker IOCB to the firmware.
* @ha: HA context
* @loop_id: loop ID
* @lun: LUN
* @type: marker modifier
*
* Can be called from both normal and interrupt context.
*
* Returns non-zero if a failure occurred, else zero.
*/
static int
__qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req,
struct rsp_que *rsp, uint16_t loop_id,
uint64_t lun, uint8_t type)
{
mrk_entry_t *mrk;
struct mrk_entry_24xx *mrk24 = NULL;
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
req = ha->req_q_map[0];
mrk = (mrk_entry_t *)qla2x00_alloc_iocbs(vha, NULL);
if (mrk == NULL) {
ql_log(ql_log_warn, base_vha, 0x3026,
"Failed to allocate Marker IOCB.\n");
return (QLA_FUNCTION_FAILED);
}
mrk->entry_type = MARKER_TYPE;
mrk->modifier = type;
if (type != MK_SYNC_ALL) {
if (IS_FWI2_CAPABLE(ha)) {
mrk24 = (struct mrk_entry_24xx *) mrk;
mrk24->nport_handle = cpu_to_le16(loop_id);
int_to_scsilun(lun, (struct scsi_lun *)&mrk24->lun);
host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun));
mrk24->vp_index = vha->vp_idx;
mrk24->handle = MAKE_HANDLE(req->id, mrk24->handle);
} else {
SET_TARGET_ID(ha, mrk->target, loop_id);
mrk->lun = cpu_to_le16((uint16_t)lun);
}
}
wmb();
qla2x00_start_iocbs(vha, req);
return (QLA_SUCCESS);
}
int
qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req,
struct rsp_que *rsp, uint16_t loop_id, uint64_t lun,
uint8_t type)
{
int ret;
unsigned long flags = 0;
spin_lock_irqsave(&vha->hw->hardware_lock, flags);
ret = __qla2x00_marker(vha, req, rsp, loop_id, lun, type);
spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
return (ret);
}
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:28 +08:00
/*
* qla2x00_issue_marker
*
* Issue marker
* Caller CAN have hardware lock held as specified by ha_locked parameter.
* Might release it, then reaquire.
*/
int qla2x00_issue_marker(scsi_qla_host_t *vha, int ha_locked)
{
if (ha_locked) {
if (__qla2x00_marker(vha, vha->req, vha->req->rsp, 0, 0,
MK_SYNC_ALL) != QLA_SUCCESS)
return QLA_FUNCTION_FAILED;
} else {
if (qla2x00_marker(vha, vha->req, vha->req->rsp, 0, 0,
MK_SYNC_ALL) != QLA_SUCCESS)
return QLA_FUNCTION_FAILED;
}
vha->marker_needed = 0;
return QLA_SUCCESS;
}
static inline int
qla24xx_build_scsi_type_6_iocbs(srb_t *sp, struct cmd_type_6 *cmd_pkt,
uint16_t tot_dsds)
{
uint32_t *cur_dsd = NULL;
scsi_qla_host_t *vha;
struct qla_hw_data *ha;
struct scsi_cmnd *cmd;
struct scatterlist *cur_seg;
uint32_t *dsd_seg;
void *next_dsd;
uint8_t avail_dsds;
uint8_t first_iocb = 1;
uint32_t dsd_list_len;
struct dsd_dma *dsd_ptr;
struct ct6_dsd *ctx;
cmd = GET_CMD_SP(sp);
/* Update entry type to indicate Command Type 3 IOCB */
*((uint32_t *)(&cmd_pkt->entry_type)) = cpu_to_le32(COMMAND_TYPE_6);
/* No data transfer */
if (!scsi_bufflen(cmd) || cmd->sc_data_direction == DMA_NONE) {
cmd_pkt->byte_count = cpu_to_le32(0);
return 0;
}
vha = sp->vha;
ha = vha->hw;
/* Set transfer direction */
if (cmd->sc_data_direction == DMA_TO_DEVICE) {
cmd_pkt->control_flags = cpu_to_le16(CF_WRITE_DATA);
vha->qla_stats.output_bytes += scsi_bufflen(cmd);
vha->qla_stats.output_requests++;
} else if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
cmd_pkt->control_flags = cpu_to_le16(CF_READ_DATA);
vha->qla_stats.input_bytes += scsi_bufflen(cmd);
vha->qla_stats.input_requests++;
}
cur_seg = scsi_sglist(cmd);
ctx = GET_CMD_CTX_SP(sp);
while (tot_dsds) {
avail_dsds = (tot_dsds > QLA_DSDS_PER_IOCB) ?
QLA_DSDS_PER_IOCB : tot_dsds;
tot_dsds -= avail_dsds;
dsd_list_len = (avail_dsds + 1) * QLA_DSD_SIZE;
dsd_ptr = list_first_entry(&ha->gbl_dsd_list,
struct dsd_dma, list);
next_dsd = dsd_ptr->dsd_addr;
list_del(&dsd_ptr->list);
ha->gbl_dsd_avail--;
list_add_tail(&dsd_ptr->list, &ctx->dsd_list);
ctx->dsd_use_cnt++;
ha->gbl_dsd_inuse++;
if (first_iocb) {
first_iocb = 0;
dsd_seg = (uint32_t *)&cmd_pkt->fcp_data_dseg_address;
*dsd_seg++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
*dsd_seg++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
cmd_pkt->fcp_data_dseg_len = cpu_to_le32(dsd_list_len);
} else {
*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
*cur_dsd++ = cpu_to_le32(dsd_list_len);
}
cur_dsd = (uint32_t *)next_dsd;
while (avail_dsds) {
dma_addr_t sle_dma;
sle_dma = sg_dma_address(cur_seg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg));
cur_seg = sg_next(cur_seg);
avail_dsds--;
}
}
/* Null termination */
*cur_dsd++ = 0;
*cur_dsd++ = 0;
*cur_dsd++ = 0;
cmd_pkt->control_flags |= CF_DATA_SEG_DESCR_ENABLE;
return 0;
}
/*
* qla24xx_calc_dsd_lists() - Determine number of DSD list required
* for Command Type 6.
*
* @dsds: number of data segment decriptors needed
*
* Returns the number of dsd list needed to store @dsds.
*/
static inline uint16_t
qla24xx_calc_dsd_lists(uint16_t dsds)
{
uint16_t dsd_lists = 0;
dsd_lists = (dsds/QLA_DSDS_PER_IOCB);
if (dsds % QLA_DSDS_PER_IOCB)
dsd_lists++;
return dsd_lists;
}
/**
* qla24xx_build_scsi_iocbs() - Build IOCB command utilizing Command Type 7
* IOCB types.
*
* @sp: SRB command to process
* @cmd_pkt: Command type 3 IOCB
* @tot_dsds: Total number of segments to transfer
* @req: pointer to request queue
*/
inline void
qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
uint16_t tot_dsds, struct req_que *req)
{
uint16_t avail_dsds;
uint32_t *cur_dsd;
scsi_qla_host_t *vha;
struct scsi_cmnd *cmd;
struct scatterlist *sg;
int i;
cmd = GET_CMD_SP(sp);
/* Update entry type to indicate Command Type 3 IOCB */
*((uint32_t *)(&cmd_pkt->entry_type)) = cpu_to_le32(COMMAND_TYPE_7);
/* No data transfer */
if (!scsi_bufflen(cmd) || cmd->sc_data_direction == DMA_NONE) {
cmd_pkt->byte_count = cpu_to_le32(0);
return;
}
vha = sp->vha;
/* Set transfer direction */
if (cmd->sc_data_direction == DMA_TO_DEVICE) {
cmd_pkt->task_mgmt_flags = cpu_to_le16(TMF_WRITE_DATA);
vha->qla_stats.output_bytes += scsi_bufflen(cmd);
vha->qla_stats.output_requests++;
} else if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
cmd_pkt->task_mgmt_flags = cpu_to_le16(TMF_READ_DATA);
vha->qla_stats.input_bytes += scsi_bufflen(cmd);
vha->qla_stats.input_requests++;
}
/* One DSD is available in the Command Type 3 IOCB */
avail_dsds = 1;
cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address;
/* Load data segments */
scsi_for_each_sg(cmd, sg, tot_dsds, i) {
dma_addr_t sle_dma;
cont_a64_entry_t *cont_pkt;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
/*
* Five DSDs are available in the Continuation
* Type 1 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(vha, req);
cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
avail_dsds = 5;
}
sle_dma = sg_dma_address(sg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
avail_dsds--;
}
}
struct fw_dif_context {
uint32_t ref_tag;
uint16_t app_tag;
uint8_t ref_tag_mask[4]; /* Validation/Replacement Mask*/
uint8_t app_tag_mask[2]; /* Validation/Replacement Mask*/
};
/*
* qla24xx_set_t10dif_tags_from_cmd - Extract Ref and App tags from SCSI command
*
*/
static inline void
qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt,
unsigned int protcnt)
{
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
switch (scsi_get_prot_type(cmd)) {
case SCSI_PROT_DIF_TYPE0:
/*
* No check for ql2xenablehba_err_chk, as it would be an
* I/O error if hba tag generation is not done.
*/
pkt->ref_tag = cpu_to_le32((uint32_t)
(0xffffffff & scsi_get_lba(cmd)));
if (!qla2x00_hba_err_chk_enabled(sp))
break;
pkt->ref_tag_mask[0] = 0xff;
pkt->ref_tag_mask[1] = 0xff;
pkt->ref_tag_mask[2] = 0xff;
pkt->ref_tag_mask[3] = 0xff;
break;
/*
* For TYPE 2 protection: 16 bit GUARD + 32 bit REF tag has to
* match LBA in CDB + N
*/
case SCSI_PROT_DIF_TYPE2:
pkt->app_tag = cpu_to_le16(0);
pkt->app_tag_mask[0] = 0x0;
pkt->app_tag_mask[1] = 0x0;
pkt->ref_tag = cpu_to_le32((uint32_t)
(0xffffffff & scsi_get_lba(cmd)));
if (!qla2x00_hba_err_chk_enabled(sp))
break;
/* enable ALL bytes of the ref tag */
pkt->ref_tag_mask[0] = 0xff;
pkt->ref_tag_mask[1] = 0xff;
pkt->ref_tag_mask[2] = 0xff;
pkt->ref_tag_mask[3] = 0xff;
break;
/* For Type 3 protection: 16 bit GUARD only */
case SCSI_PROT_DIF_TYPE3:
pkt->ref_tag_mask[0] = pkt->ref_tag_mask[1] =
pkt->ref_tag_mask[2] = pkt->ref_tag_mask[3] =
0x00;
break;
/*
* For TYpe 1 protection: 16 bit GUARD tag, 32 bit REF tag, and
* 16 bit app tag.
*/
case SCSI_PROT_DIF_TYPE1:
pkt->ref_tag = cpu_to_le32((uint32_t)
(0xffffffff & scsi_get_lba(cmd)));
pkt->app_tag = cpu_to_le16(0);
pkt->app_tag_mask[0] = 0x0;
pkt->app_tag_mask[1] = 0x0;
if (!qla2x00_hba_err_chk_enabled(sp))
break;
/* enable ALL bytes of the ref tag */
pkt->ref_tag_mask[0] = 0xff;
pkt->ref_tag_mask[1] = 0xff;
pkt->ref_tag_mask[2] = 0xff;
pkt->ref_tag_mask[3] = 0xff;
break;
}
}
int
qla24xx_get_one_block_sg(uint32_t blk_sz, struct qla2_sgx *sgx,
uint32_t *partial)
{
struct scatterlist *sg;
uint32_t cumulative_partial, sg_len;
dma_addr_t sg_dma_addr;
if (sgx->num_bytes == sgx->tot_bytes)
return 0;
sg = sgx->cur_sg;
cumulative_partial = sgx->tot_partial;
sg_dma_addr = sg_dma_address(sg);
sg_len = sg_dma_len(sg);
sgx->dma_addr = sg_dma_addr + sgx->bytes_consumed;
if ((cumulative_partial + (sg_len - sgx->bytes_consumed)) >= blk_sz) {
sgx->dma_len = (blk_sz - cumulative_partial);
sgx->tot_partial = 0;
sgx->num_bytes += blk_sz;
*partial = 0;
} else {
sgx->dma_len = sg_len - sgx->bytes_consumed;
sgx->tot_partial += sgx->dma_len;
*partial = 1;
}
sgx->bytes_consumed += sgx->dma_len;
if (sg_len == sgx->bytes_consumed) {
sg = sg_next(sg);
sgx->num_sg++;
sgx->cur_sg = sg;
sgx->bytes_consumed = 0;
}
return 1;
}
int
qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *ha, srb_t *sp,
uint32_t *dsd, uint16_t tot_dsds, struct qla_tc_param *tc)
{
void *next_dsd;
uint8_t avail_dsds = 0;
uint32_t dsd_list_len;
struct dsd_dma *dsd_ptr;
struct scatterlist *sg_prot;
uint32_t *cur_dsd = dsd;
uint16_t used_dsds = tot_dsds;
uint32_t prot_int; /* protection interval */
uint32_t partial;
struct qla2_sgx sgx;
dma_addr_t sle_dma;
uint32_t sle_dma_len, tot_prot_dma_len = 0;
struct scsi_cmnd *cmd;
memset(&sgx, 0, sizeof(struct qla2_sgx));
if (sp) {
cmd = GET_CMD_SP(sp);
prot_int = cmd->device->sector_size;
sgx.tot_bytes = scsi_bufflen(cmd);
sgx.cur_sg = scsi_sglist(cmd);
sgx.sp = sp;
sg_prot = scsi_prot_sglist(cmd);
} else if (tc) {
prot_int = tc->blk_sz;
sgx.tot_bytes = tc->bufflen;
sgx.cur_sg = tc->sg;
sg_prot = tc->prot_sg;
} else {
BUG();
return 1;
}
while (qla24xx_get_one_block_sg(prot_int, &sgx, &partial)) {
sle_dma = sgx.dma_addr;
sle_dma_len = sgx.dma_len;
alloc_and_fill:
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ?
QLA_DSDS_PER_IOCB : used_dsds;
dsd_list_len = (avail_dsds + 1) * 12;
used_dsds -= avail_dsds;
/* allocate tracking DS */
dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC);
if (!dsd_ptr)
return 1;
/* allocate new list */
dsd_ptr->dsd_addr = next_dsd =
dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC,
&dsd_ptr->dsd_list_dma);
if (!next_dsd) {
/*
* Need to cleanup only this dsd_ptr, rest
* will be done by sp_free_dma()
*/
kfree(dsd_ptr);
return 1;
}
if (sp) {
list_add_tail(&dsd_ptr->list,
&((struct crc_context *)
sp->u.scmd.ctx)->dsd_list);
sp->flags |= SRB_CRC_CTX_DSD_VALID;
} else {
list_add_tail(&dsd_ptr->list,
&(tc->ctx->dsd_list));
*tc->ctx_dsd_alloced = 1;
}
/* add new list to cmd iocb or last list */
*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
*cur_dsd++ = dsd_list_len;
cur_dsd = (uint32_t *)next_dsd;
}
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sle_dma_len);
avail_dsds--;
if (partial == 0) {
/* Got a full protection interval */
sle_dma = sg_dma_address(sg_prot) + tot_prot_dma_len;
sle_dma_len = 8;
tot_prot_dma_len += sle_dma_len;
if (tot_prot_dma_len == sg_dma_len(sg_prot)) {
tot_prot_dma_len = 0;
sg_prot = sg_next(sg_prot);
}
partial = 1; /* So as to not re-enter this block */
goto alloc_and_fill;
}
}
/* Null termination */
*cur_dsd++ = 0;
*cur_dsd++ = 0;
*cur_dsd++ = 0;
return 0;
}
int
qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd,
uint16_t tot_dsds, struct qla_tc_param *tc)
{
void *next_dsd;
uint8_t avail_dsds = 0;
uint32_t dsd_list_len;
struct dsd_dma *dsd_ptr;
struct scatterlist *sg, *sgl;
uint32_t *cur_dsd = dsd;
int i;
uint16_t used_dsds = tot_dsds;
struct scsi_cmnd *cmd;
if (sp) {
cmd = GET_CMD_SP(sp);
sgl = scsi_sglist(cmd);
} else if (tc) {
sgl = tc->sg;
} else {
BUG();
return 1;
}
for_each_sg(sgl, sg, tot_dsds, i) {
dma_addr_t sle_dma;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ?
QLA_DSDS_PER_IOCB : used_dsds;
dsd_list_len = (avail_dsds + 1) * 12;
used_dsds -= avail_dsds;
/* allocate tracking DS */
dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC);
if (!dsd_ptr)
return 1;
/* allocate new list */
dsd_ptr->dsd_addr = next_dsd =
dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC,
&dsd_ptr->dsd_list_dma);
if (!next_dsd) {
/*
* Need to cleanup only this dsd_ptr, rest
* will be done by sp_free_dma()
*/
kfree(dsd_ptr);
return 1;
}
if (sp) {
list_add_tail(&dsd_ptr->list,
&((struct crc_context *)
sp->u.scmd.ctx)->dsd_list);
sp->flags |= SRB_CRC_CTX_DSD_VALID;
} else {
list_add_tail(&dsd_ptr->list,
&(tc->ctx->dsd_list));
*tc->ctx_dsd_alloced = 1;
}
/* add new list to cmd iocb or last list */
*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
*cur_dsd++ = dsd_list_len;
cur_dsd = (uint32_t *)next_dsd;
}
sle_dma = sg_dma_address(sg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
avail_dsds--;
}
/* Null termination */
*cur_dsd++ = 0;
*cur_dsd++ = 0;
*cur_dsd++ = 0;
return 0;
}
int
qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *ha, srb_t *sp,
uint32_t *dsd, uint16_t tot_dsds, struct qla_tc_param *tc)
{
void *next_dsd;
uint8_t avail_dsds = 0;
uint32_t dsd_list_len;
struct dsd_dma *dsd_ptr;
struct scatterlist *sg, *sgl;
int i;
struct scsi_cmnd *cmd;
uint32_t *cur_dsd = dsd;
uint16_t used_dsds = tot_dsds;
struct scsi_qla_host *vha;
if (sp) {
cmd = GET_CMD_SP(sp);
sgl = scsi_prot_sglist(cmd);
vha = sp->vha;
} else if (tc) {
vha = tc->vha;
sgl = tc->prot_sg;
} else {
BUG();
return 1;
}
ql_dbg(ql_dbg_tgt, vha, 0xe021,
"%s: enter\n", __func__);
for_each_sg(sgl, sg, tot_dsds, i) {
dma_addr_t sle_dma;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ?
QLA_DSDS_PER_IOCB : used_dsds;
dsd_list_len = (avail_dsds + 1) * 12;
used_dsds -= avail_dsds;
/* allocate tracking DS */
dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC);
if (!dsd_ptr)
return 1;
/* allocate new list */
dsd_ptr->dsd_addr = next_dsd =
dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC,
&dsd_ptr->dsd_list_dma);
if (!next_dsd) {
/*
* Need to cleanup only this dsd_ptr, rest
* will be done by sp_free_dma()
*/
kfree(dsd_ptr);
return 1;
}
if (sp) {
list_add_tail(&dsd_ptr->list,
&((struct crc_context *)
sp->u.scmd.ctx)->dsd_list);
sp->flags |= SRB_CRC_CTX_DSD_VALID;
} else {
list_add_tail(&dsd_ptr->list,
&(tc->ctx->dsd_list));
*tc->ctx_dsd_alloced = 1;
}
/* add new list to cmd iocb or last list */
*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
*cur_dsd++ = dsd_list_len;
cur_dsd = (uint32_t *)next_dsd;
}
sle_dma = sg_dma_address(sg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
avail_dsds--;
}
/* Null termination */
*cur_dsd++ = 0;
*cur_dsd++ = 0;
*cur_dsd++ = 0;
return 0;
}
/**
* qla24xx_build_scsi_crc_2_iocbs() - Build IOCB command utilizing Command
* Type 6 IOCB types.
*
* @sp: SRB command to process
* @cmd_pkt: Command type 3 IOCB
* @tot_dsds: Total number of segments to transfer
*/
inline int
qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
uint16_t tot_dsds, uint16_t tot_prot_dsds, uint16_t fw_prot_opts)
{
uint32_t *cur_dsd, *fcp_dl;
scsi_qla_host_t *vha;
struct scsi_cmnd *cmd;
uint32_t total_bytes = 0;
uint32_t data_bytes;
uint32_t dif_bytes;
uint8_t bundling = 1;
uint16_t blk_size;
uint8_t *clr_ptr;
struct crc_context *crc_ctx_pkt = NULL;
struct qla_hw_data *ha;
uint8_t additional_fcpcdb_len;
uint16_t fcp_cmnd_len;
struct fcp_cmnd *fcp_cmnd;
dma_addr_t crc_ctx_dma;
cmd = GET_CMD_SP(sp);
/* Update entry type to indicate Command Type CRC_2 IOCB */
*((uint32_t *)(&cmd_pkt->entry_type)) = cpu_to_le32(COMMAND_TYPE_CRC_2);
vha = sp->vha;
ha = vha->hw;
/* No data transfer */
data_bytes = scsi_bufflen(cmd);
if (!data_bytes || cmd->sc_data_direction == DMA_NONE) {
cmd_pkt->byte_count = cpu_to_le32(0);
return QLA_SUCCESS;
}
cmd_pkt->vp_index = sp->vha->vp_idx;
/* Set transfer direction */
if (cmd->sc_data_direction == DMA_TO_DEVICE) {
cmd_pkt->control_flags =
cpu_to_le16(CF_WRITE_DATA);
} else if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
cmd_pkt->control_flags =
cpu_to_le16(CF_READ_DATA);
}
if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
(scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP) ||
(scsi_get_prot_op(cmd) == SCSI_PROT_READ_STRIP) ||
(scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_INSERT))
bundling = 0;
/* Allocate CRC context from global pool */
crc_ctx_pkt = sp->u.scmd.ctx =
dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC, &crc_ctx_dma);
if (!crc_ctx_pkt)
goto crc_queuing_error;
/* Zero out CTX area. */
clr_ptr = (uint8_t *)crc_ctx_pkt;
memset(clr_ptr, 0, sizeof(*crc_ctx_pkt));
crc_ctx_pkt->crc_ctx_dma = crc_ctx_dma;
sp->flags |= SRB_CRC_CTX_DMA_VALID;
/* Set handle */
crc_ctx_pkt->handle = cmd_pkt->handle;
INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list);
qla24xx_set_t10dif_tags(sp, (struct fw_dif_context *)
&crc_ctx_pkt->ref_tag, tot_prot_dsds);
cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma));
cmd_pkt->crc_context_address[1] = cpu_to_le32(MSD(crc_ctx_dma));
cmd_pkt->crc_context_len = CRC_CONTEXT_LEN_FW;
/* Determine SCSI command length -- align to 4 byte boundary */
if (cmd->cmd_len > 16) {
additional_fcpcdb_len = cmd->cmd_len - 16;
if ((cmd->cmd_len % 4) != 0) {
/* SCSI cmd > 16 bytes must be multiple of 4 */
goto crc_queuing_error;
}
fcp_cmnd_len = 12 + cmd->cmd_len + 4;
} else {
additional_fcpcdb_len = 0;
fcp_cmnd_len = 12 + 16 + 4;
}
fcp_cmnd = &crc_ctx_pkt->fcp_cmnd;
fcp_cmnd->additional_cdb_len = additional_fcpcdb_len;
if (cmd->sc_data_direction == DMA_TO_DEVICE)
fcp_cmnd->additional_cdb_len |= 1;
else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
fcp_cmnd->additional_cdb_len |= 2;
int_to_scsilun(cmd->device->lun, &fcp_cmnd->lun);
memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
LSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF));
cmd_pkt->fcp_cmnd_dseg_address[1] = cpu_to_le32(
MSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF));
fcp_cmnd->task_management = 0;
fcp_cmnd->task_attribute = TSK_SIMPLE;
cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
/* Compute dif len and adjust data len to incude protection */
dif_bytes = 0;
blk_size = cmd->device->sector_size;
dif_bytes = (data_bytes / blk_size) * 8;
switch (scsi_get_prot_op(GET_CMD_SP(sp))) {
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
total_bytes = data_bytes;
data_bytes += dif_bytes;
break;
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
total_bytes = data_bytes + dif_bytes;
break;
default:
BUG();
}
if (!qla2x00_hba_err_chk_enabled(sp))
fw_prot_opts |= 0x10; /* Disable Guard tag checking */
/* HBA error checking enabled */
else if (IS_PI_UNINIT_CAPABLE(ha)) {
if ((scsi_get_prot_type(GET_CMD_SP(sp)) == SCSI_PROT_DIF_TYPE1)
|| (scsi_get_prot_type(GET_CMD_SP(sp)) ==
SCSI_PROT_DIF_TYPE2))
fw_prot_opts |= BIT_10;
else if (scsi_get_prot_type(GET_CMD_SP(sp)) ==
SCSI_PROT_DIF_TYPE3)
fw_prot_opts |= BIT_11;
}
if (!bundling) {
cur_dsd = (uint32_t *) &crc_ctx_pkt->u.nobundling.data_address;
} else {
/*
* Configure Bundling if we need to fetch interlaving
* protection PCI accesses
*/
fw_prot_opts |= PO_ENABLE_DIF_BUNDLING;
crc_ctx_pkt->u.bundling.dif_byte_count = cpu_to_le32(dif_bytes);
crc_ctx_pkt->u.bundling.dseg_count = cpu_to_le16(tot_dsds -
tot_prot_dsds);
cur_dsd = (uint32_t *) &crc_ctx_pkt->u.bundling.data_address;
}
/* Finish the common fields of CRC pkt */
crc_ctx_pkt->blk_size = cpu_to_le16(blk_size);
crc_ctx_pkt->prot_opts = cpu_to_le16(fw_prot_opts);
crc_ctx_pkt->byte_count = cpu_to_le32(data_bytes);
crc_ctx_pkt->guard_seed = cpu_to_le16(0);
/* Fibre channel byte count */
cmd_pkt->byte_count = cpu_to_le32(total_bytes);
fcp_dl = (uint32_t *)(crc_ctx_pkt->fcp_cmnd.cdb + 16 +
additional_fcpcdb_len);
*fcp_dl = htonl(total_bytes);
if (!data_bytes || cmd->sc_data_direction == DMA_NONE) {
cmd_pkt->byte_count = cpu_to_le32(0);
return QLA_SUCCESS;
}
/* Walks data segments */
cmd_pkt->control_flags |= cpu_to_le16(CF_DATA_SEG_DESCR_ENABLE);
if (!bundling && tot_prot_dsds) {
if (qla24xx_walk_and_build_sglist_no_difb(ha, sp,
cur_dsd, tot_dsds, NULL))
goto crc_queuing_error;
} else if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
(tot_dsds - tot_prot_dsds), NULL))
goto crc_queuing_error;
if (bundling && tot_prot_dsds) {
/* Walks dif segments */
cmd_pkt->control_flags |= cpu_to_le16(CF_DIF_SEG_DESCR_ENABLE);
cur_dsd = (uint32_t *) &crc_ctx_pkt->u.bundling.dif_address;
if (qla24xx_walk_and_build_prot_sglist(ha, sp, cur_dsd,
tot_prot_dsds, NULL))
goto crc_queuing_error;
}
return QLA_SUCCESS;
crc_queuing_error:
/* Cleanup will be performed by the caller */
return QLA_FUNCTION_FAILED;
}
/**
* qla24xx_start_scsi() - Send a SCSI command to the ISP
* @sp: command to send to the ISP
*
* Returns non-zero if a failure occurred, else zero.
*/
int
qla24xx_start_scsi(srb_t *sp)
{
int nseg;
unsigned long flags;
uint32_t *clr_ptr;
uint32_t index;
uint32_t handle;
struct cmd_type_7 *cmd_pkt;
uint16_t cnt;
uint16_t req_cnt;
uint16_t tot_dsds;
struct req_que *req = NULL;
struct rsp_que *rsp = NULL;
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
struct scsi_qla_host *vha = sp->vha;
struct qla_hw_data *ha = vha->hw;
/* Setup device pointers. */
req = vha->req;
rsp = req->rsp;
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
/* Send marker if required */
if (vha->marker_needed != 0) {
if (qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL) !=
QLA_SUCCESS)
return QLA_FUNCTION_FAILED;
vha->marker_needed = 0;
}
/* Acquire ring specific lock */
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
if (index == req->num_outstanding_cmds)
goto queuing_error;
/* Map the sg table so we have an accurate count of sg entries needed */
if (scsi_sg_count(cmd)) {
nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd),
scsi_sg_count(cmd), cmd->sc_data_direction);
if (unlikely(!nseg))
goto queuing_error;
} else
nseg = 0;
tot_dsds = nseg;
req_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
if (req->cnt < (req_cnt + 2)) {
cnt = IS_SHADOW_REG_CAPABLE(ha) ? *req->out_ptr :
RD_REG_DWORD_RELAXED(req->req_q_out);
if (req->ring_index < cnt)
req->cnt = cnt - req->ring_index;
else
req->cnt = req->length -
(req->ring_index - cnt);
if (req->cnt < (req_cnt + 2))
goto queuing_error;
}
/* Build command packet. */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
sp->handle = handle;
cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
cmd_pkt = (struct cmd_type_7 *)req->ring_ptr;
cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
/* Zero out remaining portion of packet. */
/* tagged queuing modifier -- default is TSK_SIMPLE (0). */
clr_ptr = (uint32_t *)cmd_pkt + 2;
memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
cmd_pkt->dseg_count = cpu_to_le16(tot_dsds);
/* Set NPORT-ID and LUN number*/
cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id);
cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa;
cmd_pkt->port_id[1] = sp->fcport->d_id.b.area;
cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain;
cmd_pkt->vp_index = sp->vha->vp_idx;
int_to_scsilun(cmd->device->lun, &cmd_pkt->lun);
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
cmd_pkt->task = TSK_SIMPLE;
/* Load SCSI command packet. */
memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len);
host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb));
cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd));
/* Build IOCB segments */
qla24xx_build_scsi_iocbs(sp, cmd_pkt, tot_dsds, req);
/* Set total data segment count. */
cmd_pkt->entry_count = (uint8_t)req_cnt;
wmb();
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else
req->ring_ptr++;
sp->flags |= SRB_DMA_VALID;
/* Set chip new ring index. */
WRT_REG_DWORD(req->req_q_in, req->ring_index);
RD_REG_DWORD_RELAXED(&ha->iobase->isp24.hccr);
/* Manage unprocessed RIO/ZIO commands in response queue. */
if (vha->flags.process_response_queue &&
rsp->ring_ptr->signature != RESPONSE_PROCESSED)
qla24xx_process_response_queue(vha, rsp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
queuing_error:
if (tot_dsds)
scsi_dma_unmap(cmd);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_FUNCTION_FAILED;
}
/**
* qla24xx_dif_start_scsi() - Send a SCSI command to the ISP
* @sp: command to send to the ISP
*
* Returns non-zero if a failure occurred, else zero.
*/
int
qla24xx_dif_start_scsi(srb_t *sp)
{
int nseg;
unsigned long flags;
uint32_t *clr_ptr;
uint32_t index;
uint32_t handle;
uint16_t cnt;
uint16_t req_cnt = 0;
uint16_t tot_dsds;
uint16_t tot_prot_dsds;
uint16_t fw_prot_opts = 0;
struct req_que *req = NULL;
struct rsp_que *rsp = NULL;
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
struct scsi_qla_host *vha = sp->vha;
struct qla_hw_data *ha = vha->hw;
struct cmd_type_crc_2 *cmd_pkt;
uint32_t status = 0;
#define QDSS_GOT_Q_SPACE BIT_0
/* Only process protection or >16 cdb in this routine */
if (scsi_get_prot_op(cmd) == SCSI_PROT_NORMAL) {
if (cmd->cmd_len <= 16)
return qla24xx_start_scsi(sp);
}
/* Setup device pointers. */
req = vha->req;
rsp = req->rsp;
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
/* Send marker if required */
if (vha->marker_needed != 0) {
if (qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL) !=
QLA_SUCCESS)
return QLA_FUNCTION_FAILED;
vha->marker_needed = 0;
}
/* Acquire ring specific lock */
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
if (index == req->num_outstanding_cmds)
goto queuing_error;
/* Compute number of required data segments */
/* Map the sg table so we have an accurate count of sg entries needed */
if (scsi_sg_count(cmd)) {
nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd),
scsi_sg_count(cmd), cmd->sc_data_direction);
if (unlikely(!nseg))
goto queuing_error;
else
sp->flags |= SRB_DMA_VALID;
if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
(scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
struct qla2_sgx sgx;
uint32_t partial;
memset(&sgx, 0, sizeof(struct qla2_sgx));
sgx.tot_bytes = scsi_bufflen(cmd);
sgx.cur_sg = scsi_sglist(cmd);
sgx.sp = sp;
nseg = 0;
while (qla24xx_get_one_block_sg(
cmd->device->sector_size, &sgx, &partial))
nseg++;
}
} else
nseg = 0;
/* number of required data segments */
tot_dsds = nseg;
/* Compute number of required protection segments */
if (qla24xx_configure_prot_mode(sp, &fw_prot_opts)) {
nseg = dma_map_sg(&ha->pdev->dev, scsi_prot_sglist(cmd),
scsi_prot_sg_count(cmd), cmd->sc_data_direction);
if (unlikely(!nseg))
goto queuing_error;
else
sp->flags |= SRB_CRC_PROT_DMA_VALID;
if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
(scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
nseg = scsi_bufflen(cmd) / cmd->device->sector_size;
}
} else {
nseg = 0;
}
req_cnt = 1;
/* Total Data and protection sg segment(s) */
tot_prot_dsds = nseg;
tot_dsds += nseg;
if (req->cnt < (req_cnt + 2)) {
cnt = IS_SHADOW_REG_CAPABLE(ha) ? *req->out_ptr :
RD_REG_DWORD_RELAXED(req->req_q_out);
if (req->ring_index < cnt)
req->cnt = cnt - req->ring_index;
else
req->cnt = req->length -
(req->ring_index - cnt);
if (req->cnt < (req_cnt + 2))
goto queuing_error;
}
status |= QDSS_GOT_Q_SPACE;
/* Build header part of command packet (excluding the OPCODE). */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
sp->handle = handle;
cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
/* Fill-in common area */
cmd_pkt = (struct cmd_type_crc_2 *)req->ring_ptr;
cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
clr_ptr = (uint32_t *)cmd_pkt + 2;
memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
/* Set NPORT-ID and LUN number*/
cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id);
cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa;
cmd_pkt->port_id[1] = sp->fcport->d_id.b.area;
cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain;
int_to_scsilun(cmd->device->lun, &cmd_pkt->lun);
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
/* Total Data and protection segment(s) */
cmd_pkt->dseg_count = cpu_to_le16(tot_dsds);
/* Build IOCB segments and adjust for data protection segments */
if (qla24xx_build_scsi_crc_2_iocbs(sp, (struct cmd_type_crc_2 *)
req->ring_ptr, tot_dsds, tot_prot_dsds, fw_prot_opts) !=
QLA_SUCCESS)
goto queuing_error;
cmd_pkt->entry_count = (uint8_t)req_cnt;
/* Specify response queue number where completion should happen */
cmd_pkt->entry_status = (uint8_t) rsp->id;
cmd_pkt->timeout = cpu_to_le16(0);
wmb();
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else
req->ring_ptr++;
/* Set chip new ring index. */
WRT_REG_DWORD(req->req_q_in, req->ring_index);
RD_REG_DWORD_RELAXED(&ha->iobase->isp24.hccr);
/* Manage unprocessed RIO/ZIO commands in response queue. */
if (vha->flags.process_response_queue &&
rsp->ring_ptr->signature != RESPONSE_PROCESSED)
qla24xx_process_response_queue(vha, rsp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
queuing_error:
if (status & QDSS_GOT_Q_SPACE) {
req->outstanding_cmds[handle] = NULL;
req->cnt += req_cnt;
}
/* Cleanup will be performed by the caller (queuecommand) */
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_FUNCTION_FAILED;
}
/**
* qla2xxx_start_scsi_mq() - Send a SCSI command to the ISP
* @sp: command to send to the ISP
*
* Returns non-zero if a failure occurred, else zero.
*/
static int
qla2xxx_start_scsi_mq(srb_t *sp)
{
int nseg;
unsigned long flags;
uint32_t *clr_ptr;
uint32_t index;
uint32_t handle;
struct cmd_type_7 *cmd_pkt;
uint16_t cnt;
uint16_t req_cnt;
uint16_t tot_dsds;
struct req_que *req = NULL;
struct rsp_que *rsp = NULL;
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
struct scsi_qla_host *vha = sp->fcport->vha;
struct qla_hw_data *ha = vha->hw;
struct qla_qpair *qpair = sp->qpair;
/* Setup qpair pointers */
rsp = qpair->rsp;
req = qpair->req;
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
/* Send marker if required */
if (vha->marker_needed != 0) {
if (qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL) !=
QLA_SUCCESS)
return QLA_FUNCTION_FAILED;
vha->marker_needed = 0;
}
/* Acquire qpair specific lock */
spin_lock_irqsave(&qpair->qp_lock, flags);
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
if (index == req->num_outstanding_cmds)
goto queuing_error;
/* Map the sg table so we have an accurate count of sg entries needed */
if (scsi_sg_count(cmd)) {
nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd),
scsi_sg_count(cmd), cmd->sc_data_direction);
if (unlikely(!nseg))
goto queuing_error;
} else
nseg = 0;
tot_dsds = nseg;
req_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
if (req->cnt < (req_cnt + 2)) {
cnt = IS_SHADOW_REG_CAPABLE(ha) ? *req->out_ptr :
RD_REG_DWORD_RELAXED(req->req_q_out);
if (req->ring_index < cnt)
req->cnt = cnt - req->ring_index;
else
req->cnt = req->length -
(req->ring_index - cnt);
if (req->cnt < (req_cnt + 2))
goto queuing_error;
}
/* Build command packet. */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
sp->handle = handle;
cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
cmd_pkt = (struct cmd_type_7 *)req->ring_ptr;
cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
/* Zero out remaining portion of packet. */
/* tagged queuing modifier -- default is TSK_SIMPLE (0). */
clr_ptr = (uint32_t *)cmd_pkt + 2;
memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
cmd_pkt->dseg_count = cpu_to_le16(tot_dsds);
/* Set NPORT-ID and LUN number*/
cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id);
cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa;
cmd_pkt->port_id[1] = sp->fcport->d_id.b.area;
cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain;
cmd_pkt->vp_index = sp->fcport->vha->vp_idx;
int_to_scsilun(cmd->device->lun, &cmd_pkt->lun);
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
cmd_pkt->task = TSK_SIMPLE;
/* Load SCSI command packet. */
memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len);
host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb));
cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd));
/* Build IOCB segments */
qla24xx_build_scsi_iocbs(sp, cmd_pkt, tot_dsds, req);
/* Set total data segment count. */
cmd_pkt->entry_count = (uint8_t)req_cnt;
wmb();
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else
req->ring_ptr++;
sp->flags |= SRB_DMA_VALID;
/* Set chip new ring index. */
WRT_REG_DWORD(req->req_q_in, req->ring_index);
/* Manage unprocessed RIO/ZIO commands in response queue. */
if (vha->flags.process_response_queue &&
rsp->ring_ptr->signature != RESPONSE_PROCESSED)
qla24xx_process_response_queue(vha, rsp);
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return QLA_SUCCESS;
queuing_error:
if (tot_dsds)
scsi_dma_unmap(cmd);
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return QLA_FUNCTION_FAILED;
}
/**
* qla2xxx_dif_start_scsi_mq() - Send a SCSI command to the ISP
* @sp: command to send to the ISP
*
* Returns non-zero if a failure occurred, else zero.
*/
int
qla2xxx_dif_start_scsi_mq(srb_t *sp)
{
int nseg;
unsigned long flags;
uint32_t *clr_ptr;
uint32_t index;
uint32_t handle;
uint16_t cnt;
uint16_t req_cnt = 0;
uint16_t tot_dsds;
uint16_t tot_prot_dsds;
uint16_t fw_prot_opts = 0;
struct req_que *req = NULL;
struct rsp_que *rsp = NULL;
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
struct scsi_qla_host *vha = sp->fcport->vha;
struct qla_hw_data *ha = vha->hw;
struct cmd_type_crc_2 *cmd_pkt;
uint32_t status = 0;
struct qla_qpair *qpair = sp->qpair;
#define QDSS_GOT_Q_SPACE BIT_0
/* Check for host side state */
if (!qpair->online) {
cmd->result = DID_NO_CONNECT << 16;
return QLA_INTERFACE_ERROR;
}
if (!qpair->difdix_supported &&
scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
cmd->result = DID_NO_CONNECT << 16;
return QLA_INTERFACE_ERROR;
}
/* Only process protection or >16 cdb in this routine */
if (scsi_get_prot_op(cmd) == SCSI_PROT_NORMAL) {
if (cmd->cmd_len <= 16)
return qla2xxx_start_scsi_mq(sp);
}
/* Setup qpair pointers */
rsp = qpair->rsp;
req = qpair->req;
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
/* Send marker if required */
if (vha->marker_needed != 0) {
if (qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL) !=
QLA_SUCCESS)
return QLA_FUNCTION_FAILED;
vha->marker_needed = 0;
}
/* Acquire ring specific lock */
spin_lock_irqsave(&qpair->qp_lock, flags);
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
if (index == req->num_outstanding_cmds)
goto queuing_error;
/* Compute number of required data segments */
/* Map the sg table so we have an accurate count of sg entries needed */
if (scsi_sg_count(cmd)) {
nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd),
scsi_sg_count(cmd), cmd->sc_data_direction);
if (unlikely(!nseg))
goto queuing_error;
else
sp->flags |= SRB_DMA_VALID;
if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
(scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
struct qla2_sgx sgx;
uint32_t partial;
memset(&sgx, 0, sizeof(struct qla2_sgx));
sgx.tot_bytes = scsi_bufflen(cmd);
sgx.cur_sg = scsi_sglist(cmd);
sgx.sp = sp;
nseg = 0;
while (qla24xx_get_one_block_sg(
cmd->device->sector_size, &sgx, &partial))
nseg++;
}
} else
nseg = 0;
/* number of required data segments */
tot_dsds = nseg;
/* Compute number of required protection segments */
if (qla24xx_configure_prot_mode(sp, &fw_prot_opts)) {
nseg = dma_map_sg(&ha->pdev->dev, scsi_prot_sglist(cmd),
scsi_prot_sg_count(cmd), cmd->sc_data_direction);
if (unlikely(!nseg))
goto queuing_error;
else
sp->flags |= SRB_CRC_PROT_DMA_VALID;
if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
(scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
nseg = scsi_bufflen(cmd) / cmd->device->sector_size;
}
} else {
nseg = 0;
}
req_cnt = 1;
/* Total Data and protection sg segment(s) */
tot_prot_dsds = nseg;
tot_dsds += nseg;
if (req->cnt < (req_cnt + 2)) {
cnt = IS_SHADOW_REG_CAPABLE(ha) ? *req->out_ptr :
RD_REG_DWORD_RELAXED(req->req_q_out);
if (req->ring_index < cnt)
req->cnt = cnt - req->ring_index;
else
req->cnt = req->length -
(req->ring_index - cnt);
if (req->cnt < (req_cnt + 2))
goto queuing_error;
}
status |= QDSS_GOT_Q_SPACE;
/* Build header part of command packet (excluding the OPCODE). */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
sp->handle = handle;
cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
/* Fill-in common area */
cmd_pkt = (struct cmd_type_crc_2 *)req->ring_ptr;
cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
clr_ptr = (uint32_t *)cmd_pkt + 2;
memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
/* Set NPORT-ID and LUN number*/
cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id);
cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa;
cmd_pkt->port_id[1] = sp->fcport->d_id.b.area;
cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain;
int_to_scsilun(cmd->device->lun, &cmd_pkt->lun);
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
/* Total Data and protection segment(s) */
cmd_pkt->dseg_count = cpu_to_le16(tot_dsds);
/* Build IOCB segments and adjust for data protection segments */
if (qla24xx_build_scsi_crc_2_iocbs(sp, (struct cmd_type_crc_2 *)
req->ring_ptr, tot_dsds, tot_prot_dsds, fw_prot_opts) !=
QLA_SUCCESS)
goto queuing_error;
cmd_pkt->entry_count = (uint8_t)req_cnt;
cmd_pkt->timeout = cpu_to_le16(0);
wmb();
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else
req->ring_ptr++;
/* Set chip new ring index. */
WRT_REG_DWORD(req->req_q_in, req->ring_index);
/* Manage unprocessed RIO/ZIO commands in response queue. */
if (vha->flags.process_response_queue &&
rsp->ring_ptr->signature != RESPONSE_PROCESSED)
qla24xx_process_response_queue(vha, rsp);
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return QLA_SUCCESS;
queuing_error:
if (status & QDSS_GOT_Q_SPACE) {
req->outstanding_cmds[handle] = NULL;
req->cnt += req_cnt;
}
/* Cleanup will be performed by the caller (queuecommand) */
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return QLA_FUNCTION_FAILED;
}
/* Generic Control-SRB manipulation functions. */
/* hardware_lock assumed to be held. */
void *
__qla2x00_alloc_iocbs(struct qla_qpair *qpair, srb_t *sp)
{
scsi_qla_host_t *vha = qpair->vha;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = qpair->req;
device_reg_t *reg = ISP_QUE_REG(ha, req->id);
uint32_t index, handle;
request_t *pkt;
uint16_t cnt, req_cnt;
pkt = NULL;
req_cnt = 1;
handle = 0;
if (!sp)
goto skip_cmd_array;
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
if (index == req->num_outstanding_cmds) {
ql_log(ql_log_warn, vha, 0x700b,
"No room on outstanding cmd array.\n");
goto queuing_error;
}
/* Prep command array. */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
sp->handle = handle;
/* Adjust entry-counts as needed. */
if (sp->type != SRB_SCSI_CMD)
req_cnt = sp->iocbs;
skip_cmd_array:
/* Check for room on request queue. */
if (req->cnt < req_cnt + 2) {
if (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha))
cnt = RD_REG_DWORD(&reg->isp25mq.req_q_out);
else if (IS_P3P_TYPE(ha))
cnt = RD_REG_DWORD(&reg->isp82.req_q_out);
else if (IS_FWI2_CAPABLE(ha))
cnt = RD_REG_DWORD(&reg->isp24.req_q_out);
else if (IS_QLAFX00(ha))
cnt = RD_REG_DWORD(&reg->ispfx00.req_q_out);
else
cnt = qla2x00_debounce_register(
ISP_REQ_Q_OUT(ha, &reg->isp));
if (req->ring_index < cnt)
req->cnt = cnt - req->ring_index;
else
req->cnt = req->length -
(req->ring_index - cnt);
}
if (req->cnt < req_cnt + 2)
goto queuing_error;
/* Prep packet */
req->cnt -= req_cnt;
pkt = req->ring_ptr;
memset(pkt, 0, REQUEST_ENTRY_SIZE);
if (IS_QLAFX00(ha)) {
WRT_REG_BYTE((void __iomem *)&pkt->entry_count, req_cnt);
WRT_REG_WORD((void __iomem *)&pkt->handle, handle);
} else {
pkt->entry_count = req_cnt;
pkt->handle = handle;
}
queuing_error:
qpair->tgt_counters.num_alloc_iocb_failed++;
return pkt;
}
void *
qla2x00_alloc_iocbs_ready(struct qla_qpair *qpair, srb_t *sp)
{
scsi_qla_host_t *vha = qpair->vha;
if (qla2x00_reset_active(vha))
return NULL;
return __qla2x00_alloc_iocbs(qpair, sp);
}
void *
qla2x00_alloc_iocbs(struct scsi_qla_host *vha, srb_t *sp)
{
return __qla2x00_alloc_iocbs(vha->hw->base_qpair, sp);
}
static void
qla24xx_login_iocb(srb_t *sp, struct logio_entry_24xx *logio)
{
struct srb_iocb *lio = &sp->u.iocb_cmd;
logio->entry_type = LOGINOUT_PORT_IOCB_TYPE;
logio->control_flags = cpu_to_le16(LCF_COMMAND_PLOGI);
if (lio->u.logio.flags & SRB_LOGIN_COND_PLOGI)
logio->control_flags |= cpu_to_le16(LCF_COND_PLOGI);
if (lio->u.logio.flags & SRB_LOGIN_SKIP_PRLI)
logio->control_flags |= cpu_to_le16(LCF_SKIP_PRLI);
logio->nport_handle = cpu_to_le16(sp->fcport->loop_id);
logio->port_id[0] = sp->fcport->d_id.b.al_pa;
logio->port_id[1] = sp->fcport->d_id.b.area;
logio->port_id[2] = sp->fcport->d_id.b.domain;
logio->vp_index = sp->vha->vp_idx;
}
static void
qla2x00_login_iocb(srb_t *sp, struct mbx_entry *mbx)
{
struct qla_hw_data *ha = sp->vha->hw;
struct srb_iocb *lio = &sp->u.iocb_cmd;
uint16_t opts;
mbx->entry_type = MBX_IOCB_TYPE;
SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id);
mbx->mb0 = cpu_to_le16(MBC_LOGIN_FABRIC_PORT);
opts = lio->u.logio.flags & SRB_LOGIN_COND_PLOGI ? BIT_0 : 0;
opts |= lio->u.logio.flags & SRB_LOGIN_SKIP_PRLI ? BIT_1 : 0;
if (HAS_EXTENDED_IDS(ha)) {
mbx->mb1 = cpu_to_le16(sp->fcport->loop_id);
mbx->mb10 = cpu_to_le16(opts);
} else {
mbx->mb1 = cpu_to_le16((sp->fcport->loop_id << 8) | opts);
}
mbx->mb2 = cpu_to_le16(sp->fcport->d_id.b.domain);
mbx->mb3 = cpu_to_le16(sp->fcport->d_id.b.area << 8 |
sp->fcport->d_id.b.al_pa);
mbx->mb9 = cpu_to_le16(sp->vha->vp_idx);
}
static void
qla24xx_logout_iocb(srb_t *sp, struct logio_entry_24xx *logio)
{
logio->entry_type = LOGINOUT_PORT_IOCB_TYPE;
logio->control_flags =
cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
if (!sp->fcport->se_sess ||
!sp->fcport->keep_nport_handle)
qla2xxx: delay plogi/prli ack until existing sessions are deleted - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-15 04:00:44 +08:00
logio->control_flags |= cpu_to_le16(LCF_FREE_NPORT);
logio->nport_handle = cpu_to_le16(sp->fcport->loop_id);
logio->port_id[0] = sp->fcport->d_id.b.al_pa;
logio->port_id[1] = sp->fcport->d_id.b.area;
logio->port_id[2] = sp->fcport->d_id.b.domain;
logio->vp_index = sp->vha->vp_idx;
}
static void
qla2x00_logout_iocb(srb_t *sp, struct mbx_entry *mbx)
{
struct qla_hw_data *ha = sp->vha->hw;
mbx->entry_type = MBX_IOCB_TYPE;
SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id);
mbx->mb0 = cpu_to_le16(MBC_LOGOUT_FABRIC_PORT);
mbx->mb1 = HAS_EXTENDED_IDS(ha) ?
cpu_to_le16(sp->fcport->loop_id):
cpu_to_le16(sp->fcport->loop_id << 8);
mbx->mb2 = cpu_to_le16(sp->fcport->d_id.b.domain);
mbx->mb3 = cpu_to_le16(sp->fcport->d_id.b.area << 8 |
sp->fcport->d_id.b.al_pa);
mbx->mb9 = cpu_to_le16(sp->vha->vp_idx);
/* Implicit: mbx->mbx10 = 0. */
}
static void
qla24xx_adisc_iocb(srb_t *sp, struct logio_entry_24xx *logio)
{
logio->entry_type = LOGINOUT_PORT_IOCB_TYPE;
logio->control_flags = cpu_to_le16(LCF_COMMAND_ADISC);
logio->nport_handle = cpu_to_le16(sp->fcport->loop_id);
logio->vp_index = sp->vha->vp_idx;
}
static void
qla2x00_adisc_iocb(srb_t *sp, struct mbx_entry *mbx)
{
struct qla_hw_data *ha = sp->vha->hw;
mbx->entry_type = MBX_IOCB_TYPE;
SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id);
mbx->mb0 = cpu_to_le16(MBC_GET_PORT_DATABASE);
if (HAS_EXTENDED_IDS(ha)) {
mbx->mb1 = cpu_to_le16(sp->fcport->loop_id);
mbx->mb10 = cpu_to_le16(BIT_0);
} else {
mbx->mb1 = cpu_to_le16((sp->fcport->loop_id << 8) | BIT_0);
}
mbx->mb2 = cpu_to_le16(MSW(ha->async_pd_dma));
mbx->mb3 = cpu_to_le16(LSW(ha->async_pd_dma));
mbx->mb6 = cpu_to_le16(MSW(MSD(ha->async_pd_dma)));
mbx->mb7 = cpu_to_le16(LSW(MSD(ha->async_pd_dma)));
mbx->mb9 = cpu_to_le16(sp->vha->vp_idx);
}
static void
qla24xx_tm_iocb(srb_t *sp, struct tsk_mgmt_entry *tsk)
{
uint32_t flags;
uint64_t lun;
struct fc_port *fcport = sp->fcport;
scsi_qla_host_t *vha = fcport->vha;
struct qla_hw_data *ha = vha->hw;
struct srb_iocb *iocb = &sp->u.iocb_cmd;
struct req_que *req = vha->req;
flags = iocb->u.tmf.flags;
lun = iocb->u.tmf.lun;
tsk->entry_type = TSK_MGMT_IOCB_TYPE;
tsk->entry_count = 1;
tsk->handle = MAKE_HANDLE(req->id, tsk->handle);
tsk->nport_handle = cpu_to_le16(fcport->loop_id);
tsk->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
tsk->control_flags = cpu_to_le32(flags);
tsk->port_id[0] = fcport->d_id.b.al_pa;
tsk->port_id[1] = fcport->d_id.b.area;
tsk->port_id[2] = fcport->d_id.b.domain;
tsk->vp_index = fcport->vha->vp_idx;
if (flags == TCF_LUN_RESET) {
int_to_scsilun(lun, &tsk->lun);
host_to_fcp_swap((uint8_t *)&tsk->lun,
sizeof(tsk->lun));
}
}
static void
qla2x00_els_dcmd_sp_free(void *data)
{
srb_t *sp = data;
struct srb_iocb *elsio = &sp->u.iocb_cmd;
kfree(sp->fcport);
if (elsio->u.els_logo.els_logo_pyld)
dma_free_coherent(&sp->vha->hw->pdev->dev, DMA_POOL_SIZE,
elsio->u.els_logo.els_logo_pyld,
elsio->u.els_logo.els_logo_pyld_dma);
del_timer(&elsio->timer);
qla2x00_rel_sp(sp);
}
static void
qla2x00_els_dcmd_iocb_timeout(void *data)
{
srb_t *sp = data;
fc_port_t *fcport = sp->fcport;
struct scsi_qla_host *vha = sp->vha;
struct qla_hw_data *ha = vha->hw;
struct srb_iocb *lio = &sp->u.iocb_cmd;
unsigned long flags = 0;
ql_dbg(ql_dbg_io, vha, 0x3069,
"%s Timeout, hdl=%x, portid=%02x%02x%02x\n",
sp->name, sp->handle, fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
/* Abort the exchange */
spin_lock_irqsave(&ha->hardware_lock, flags);
if (ha->isp_ops->abort_command(sp)) {
ql_dbg(ql_dbg_io, vha, 0x3070,
"mbx abort_command failed.\n");
} else {
ql_dbg(ql_dbg_io, vha, 0x3071,
"mbx abort_command success.\n");
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
complete(&lio->u.els_logo.comp);
}
static void
qla2x00_els_dcmd_sp_done(void *ptr, int res)
{
srb_t *sp = ptr;
fc_port_t *fcport = sp->fcport;
struct srb_iocb *lio = &sp->u.iocb_cmd;
struct scsi_qla_host *vha = sp->vha;
ql_dbg(ql_dbg_io, vha, 0x3072,
"%s hdl=%x, portid=%02x%02x%02x done\n",
sp->name, sp->handle, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
complete(&lio->u.els_logo.comp);
}
int
qla24xx_els_dcmd_iocb(scsi_qla_host_t *vha, int els_opcode,
port_id_t remote_did)
{
srb_t *sp;
fc_port_t *fcport = NULL;
struct srb_iocb *elsio = NULL;
struct qla_hw_data *ha = vha->hw;
struct els_logo_payload logo_pyld;
int rval = QLA_SUCCESS;
fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (!fcport) {
ql_log(ql_log_info, vha, 0x70e5, "fcport allocation failed\n");
return -ENOMEM;
}
/* Alloc SRB structure */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp) {
kfree(fcport);
ql_log(ql_log_info, vha, 0x70e6,
"SRB allocation failed\n");
return -ENOMEM;
}
elsio = &sp->u.iocb_cmd;
fcport->loop_id = 0xFFFF;
fcport->d_id.b.domain = remote_did.b.domain;
fcport->d_id.b.area = remote_did.b.area;
fcport->d_id.b.al_pa = remote_did.b.al_pa;
ql_dbg(ql_dbg_io, vha, 0x3073, "portid=%02x%02x%02x done\n",
fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa);
sp->type = SRB_ELS_DCMD;
sp->name = "ELS_DCMD";
sp->fcport = fcport;
qla2x00_init_timer(sp, ELS_DCMD_TIMEOUT);
elsio->timeout = qla2x00_els_dcmd_iocb_timeout;
sp->done = qla2x00_els_dcmd_sp_done;
sp->free = qla2x00_els_dcmd_sp_free;
elsio->u.els_logo.els_logo_pyld = dma_alloc_coherent(&ha->pdev->dev,
DMA_POOL_SIZE, &elsio->u.els_logo.els_logo_pyld_dma,
GFP_KERNEL);
if (!elsio->u.els_logo.els_logo_pyld) {
sp->free(sp);
return QLA_FUNCTION_FAILED;
}
memset(&logo_pyld, 0, sizeof(struct els_logo_payload));
elsio->u.els_logo.els_cmd = els_opcode;
logo_pyld.opcode = els_opcode;
logo_pyld.s_id[0] = vha->d_id.b.al_pa;
logo_pyld.s_id[1] = vha->d_id.b.area;
logo_pyld.s_id[2] = vha->d_id.b.domain;
host_to_fcp_swap(logo_pyld.s_id, sizeof(uint32_t));
memcpy(&logo_pyld.wwpn, vha->port_name, WWN_SIZE);
memcpy(elsio->u.els_logo.els_logo_pyld, &logo_pyld,
sizeof(struct els_logo_payload));
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS) {
sp->free(sp);
return QLA_FUNCTION_FAILED;
}
ql_dbg(ql_dbg_io, vha, 0x3074,
"%s LOGO sent, hdl=%x, loopid=%x, portid=%02x%02x%02x.\n",
sp->name, sp->handle, fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
wait_for_completion(&elsio->u.els_logo.comp);
sp->free(sp);
return rval;
}
static void
qla24xx_els_logo_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
{
scsi_qla_host_t *vha = sp->vha;
struct srb_iocb *elsio = &sp->u.iocb_cmd;
els_iocb->entry_type = ELS_IOCB_TYPE;
els_iocb->entry_count = 1;
els_iocb->sys_define = 0;
els_iocb->entry_status = 0;
els_iocb->handle = sp->handle;
els_iocb->nport_handle = cpu_to_le16(sp->fcport->loop_id);
els_iocb->tx_dsd_count = 1;
els_iocb->vp_index = vha->vp_idx;
els_iocb->sof_type = EST_SOFI3;
els_iocb->rx_dsd_count = 0;
els_iocb->opcode = elsio->u.els_logo.els_cmd;
els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
els_iocb->port_id[1] = sp->fcport->d_id.b.area;
els_iocb->port_id[2] = sp->fcport->d_id.b.domain;
els_iocb->control_flags = 0;
els_iocb->tx_byte_count = sizeof(struct els_logo_payload);
els_iocb->tx_address[0] =
cpu_to_le32(LSD(elsio->u.els_logo.els_logo_pyld_dma));
els_iocb->tx_address[1] =
cpu_to_le32(MSD(elsio->u.els_logo.els_logo_pyld_dma));
els_iocb->tx_len = cpu_to_le32(sizeof(struct els_logo_payload));
els_iocb->rx_byte_count = 0;
els_iocb->rx_address[0] = 0;
els_iocb->rx_address[1] = 0;
els_iocb->rx_len = 0;
sp->vha->qla_stats.control_requests++;
}
static void
qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
{
struct bsg_job *bsg_job = sp->u.bsg_job;
struct fc_bsg_request *bsg_request = bsg_job->request;
els_iocb->entry_type = ELS_IOCB_TYPE;
els_iocb->entry_count = 1;
els_iocb->sys_define = 0;
els_iocb->entry_status = 0;
els_iocb->handle = sp->handle;
els_iocb->nport_handle = cpu_to_le16(sp->fcport->loop_id);
els_iocb->tx_dsd_count = cpu_to_le16(bsg_job->request_payload.sg_cnt);
els_iocb->vp_index = sp->vha->vp_idx;
els_iocb->sof_type = EST_SOFI3;
els_iocb->rx_dsd_count = cpu_to_le16(bsg_job->reply_payload.sg_cnt);
els_iocb->opcode =
sp->type == SRB_ELS_CMD_RPT ?
bsg_request->rqst_data.r_els.els_code :
bsg_request->rqst_data.h_els.command_code;
els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
els_iocb->port_id[1] = sp->fcport->d_id.b.area;
els_iocb->port_id[2] = sp->fcport->d_id.b.domain;
els_iocb->control_flags = 0;
els_iocb->rx_byte_count =
cpu_to_le32(bsg_job->reply_payload.payload_len);
els_iocb->tx_byte_count =
cpu_to_le32(bsg_job->request_payload.payload_len);
els_iocb->tx_address[0] = cpu_to_le32(LSD(sg_dma_address
(bsg_job->request_payload.sg_list)));
els_iocb->tx_address[1] = cpu_to_le32(MSD(sg_dma_address
(bsg_job->request_payload.sg_list)));
els_iocb->tx_len = cpu_to_le32(sg_dma_len
(bsg_job->request_payload.sg_list));
els_iocb->rx_address[0] = cpu_to_le32(LSD(sg_dma_address
(bsg_job->reply_payload.sg_list)));
els_iocb->rx_address[1] = cpu_to_le32(MSD(sg_dma_address
(bsg_job->reply_payload.sg_list)));
els_iocb->rx_len = cpu_to_le32(sg_dma_len
(bsg_job->reply_payload.sg_list));
sp->vha->qla_stats.control_requests++;
}
static void
qla2x00_ct_iocb(srb_t *sp, ms_iocb_entry_t *ct_iocb)
{
uint16_t avail_dsds;
uint32_t *cur_dsd;
struct scatterlist *sg;
int index;
uint16_t tot_dsds;
scsi_qla_host_t *vha = sp->vha;
struct qla_hw_data *ha = vha->hw;
struct bsg_job *bsg_job = sp->u.bsg_job;
int loop_iterartion = 0;
int entry_count = 1;
memset(ct_iocb, 0, sizeof(ms_iocb_entry_t));
ct_iocb->entry_type = CT_IOCB_TYPE;
ct_iocb->entry_status = 0;
ct_iocb->handle1 = sp->handle;
SET_TARGET_ID(ha, ct_iocb->loop_id, sp->fcport->loop_id);
ct_iocb->status = cpu_to_le16(0);
ct_iocb->control_flags = cpu_to_le16(0);
ct_iocb->timeout = 0;
ct_iocb->cmd_dsd_count =
cpu_to_le16(bsg_job->request_payload.sg_cnt);
ct_iocb->total_dsd_count =
cpu_to_le16(bsg_job->request_payload.sg_cnt + 1);
ct_iocb->req_bytecount =
cpu_to_le32(bsg_job->request_payload.payload_len);
ct_iocb->rsp_bytecount =
cpu_to_le32(bsg_job->reply_payload.payload_len);
ct_iocb->dseg_req_address[0] = cpu_to_le32(LSD(sg_dma_address
(bsg_job->request_payload.sg_list)));
ct_iocb->dseg_req_address[1] = cpu_to_le32(MSD(sg_dma_address
(bsg_job->request_payload.sg_list)));
ct_iocb->dseg_req_length = ct_iocb->req_bytecount;
ct_iocb->dseg_rsp_address[0] = cpu_to_le32(LSD(sg_dma_address
(bsg_job->reply_payload.sg_list)));
ct_iocb->dseg_rsp_address[1] = cpu_to_le32(MSD(sg_dma_address
(bsg_job->reply_payload.sg_list)));
ct_iocb->dseg_rsp_length = ct_iocb->rsp_bytecount;
avail_dsds = 1;
cur_dsd = (uint32_t *)ct_iocb->dseg_rsp_address;
index = 0;
tot_dsds = bsg_job->reply_payload.sg_cnt;
for_each_sg(bsg_job->reply_payload.sg_list, sg, tot_dsds, index) {
dma_addr_t sle_dma;
cont_a64_entry_t *cont_pkt;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
/*
* Five DSDs are available in the Cont.
* Type 1 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(vha,
vha->hw->req_q_map[0]);
cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
avail_dsds = 5;
entry_count++;
}
sle_dma = sg_dma_address(sg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
loop_iterartion++;
avail_dsds--;
}
ct_iocb->entry_count = entry_count;
sp->vha->qla_stats.control_requests++;
}
static void
qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb)
{
uint16_t avail_dsds;
uint32_t *cur_dsd;
struct scatterlist *sg;
int index;
uint16_t tot_dsds;
scsi_qla_host_t *vha = sp->vha;
struct qla_hw_data *ha = vha->hw;
struct bsg_job *bsg_job = sp->u.bsg_job;
int loop_iterartion = 0;
int entry_count = 1;
ct_iocb->entry_type = CT_IOCB_TYPE;
ct_iocb->entry_status = 0;
ct_iocb->sys_define = 0;
ct_iocb->handle = sp->handle;
ct_iocb->nport_handle = cpu_to_le16(sp->fcport->loop_id);
ct_iocb->vp_index = sp->vha->vp_idx;
ct_iocb->comp_status = cpu_to_le16(0);
ct_iocb->cmd_dsd_count =
cpu_to_le16(bsg_job->request_payload.sg_cnt);
ct_iocb->timeout = 0;
ct_iocb->rsp_dsd_count =
cpu_to_le16(bsg_job->reply_payload.sg_cnt);
ct_iocb->rsp_byte_count =
cpu_to_le32(bsg_job->reply_payload.payload_len);
ct_iocb->cmd_byte_count =
cpu_to_le32(bsg_job->request_payload.payload_len);
ct_iocb->dseg_0_address[0] = cpu_to_le32(LSD(sg_dma_address
(bsg_job->request_payload.sg_list)));
ct_iocb->dseg_0_address[1] = cpu_to_le32(MSD(sg_dma_address
(bsg_job->request_payload.sg_list)));
ct_iocb->dseg_0_len = cpu_to_le32(sg_dma_len
(bsg_job->request_payload.sg_list));
avail_dsds = 1;
cur_dsd = (uint32_t *)ct_iocb->dseg_1_address;
index = 0;
tot_dsds = bsg_job->reply_payload.sg_cnt;
for_each_sg(bsg_job->reply_payload.sg_list, sg, tot_dsds, index) {
dma_addr_t sle_dma;
cont_a64_entry_t *cont_pkt;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
/*
* Five DSDs are available in the Cont.
* Type 1 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(vha,
ha->req_q_map[0]);
cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
avail_dsds = 5;
entry_count++;
}
sle_dma = sg_dma_address(sg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
loop_iterartion++;
avail_dsds--;
}
ct_iocb->entry_count = entry_count;
}
/*
* qla82xx_start_scsi() - Send a SCSI command to the ISP
* @sp: command to send to the ISP
*
* Returns non-zero if a failure occurred, else zero.
*/
int
qla82xx_start_scsi(srb_t *sp)
{
int nseg;
unsigned long flags;
struct scsi_cmnd *cmd;
uint32_t *clr_ptr;
uint32_t index;
uint32_t handle;
uint16_t cnt;
uint16_t req_cnt;
uint16_t tot_dsds;
struct device_reg_82xx __iomem *reg;
uint32_t dbval;
uint32_t *fcp_dl;
uint8_t additional_cdb_len;
struct ct6_dsd *ctx;
struct scsi_qla_host *vha = sp->vha;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = NULL;
struct rsp_que *rsp = NULL;
/* Setup device pointers. */
reg = &ha->iobase->isp82;
cmd = GET_CMD_SP(sp);
req = vha->req;
rsp = ha->rsp_q_map[0];
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
dbval = 0x04 | (ha->portnum << 5);
/* Send marker if required */
if (vha->marker_needed != 0) {
if (qla2x00_marker(vha, req,
rsp, 0, 0, MK_SYNC_ALL) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x300c,
"qla2x00_marker failed for cmd=%p.\n", cmd);
return QLA_FUNCTION_FAILED;
}
vha->marker_needed = 0;
}
/* Acquire ring specific lock */
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
if (index == req->num_outstanding_cmds)
goto queuing_error;
/* Map the sg table so we have an accurate count of sg entries needed */
if (scsi_sg_count(cmd)) {
nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd),
scsi_sg_count(cmd), cmd->sc_data_direction);
if (unlikely(!nseg))
goto queuing_error;
} else
nseg = 0;
tot_dsds = nseg;
if (tot_dsds > ql2xshiftctondsd) {
struct cmd_type_6 *cmd_pkt;
uint16_t more_dsd_lists = 0;
struct dsd_dma *dsd_ptr;
uint16_t i;
more_dsd_lists = qla24xx_calc_dsd_lists(tot_dsds);
if ((more_dsd_lists + ha->gbl_dsd_inuse) >= NUM_DSD_CHAIN) {
ql_dbg(ql_dbg_io, vha, 0x300d,
"Num of DSD list %d is than %d for cmd=%p.\n",
more_dsd_lists + ha->gbl_dsd_inuse, NUM_DSD_CHAIN,
cmd);
goto queuing_error;
}
if (more_dsd_lists <= ha->gbl_dsd_avail)
goto sufficient_dsds;
else
more_dsd_lists -= ha->gbl_dsd_avail;
for (i = 0; i < more_dsd_lists; i++) {
dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC);
if (!dsd_ptr) {
ql_log(ql_log_fatal, vha, 0x300e,
"Failed to allocate memory for dsd_dma "
"for cmd=%p.\n", cmd);
goto queuing_error;
}
dsd_ptr->dsd_addr = dma_pool_alloc(ha->dl_dma_pool,
GFP_ATOMIC, &dsd_ptr->dsd_list_dma);
if (!dsd_ptr->dsd_addr) {
kfree(dsd_ptr);
ql_log(ql_log_fatal, vha, 0x300f,
"Failed to allocate memory for dsd_addr "
"for cmd=%p.\n", cmd);
goto queuing_error;
}
list_add_tail(&dsd_ptr->list, &ha->gbl_dsd_list);
ha->gbl_dsd_avail++;
}
sufficient_dsds:
req_cnt = 1;
if (req->cnt < (req_cnt + 2)) {
cnt = (uint16_t)RD_REG_DWORD_RELAXED(
&reg->req_q_out[0]);
if (req->ring_index < cnt)
req->cnt = cnt - req->ring_index;
else
req->cnt = req->length -
(req->ring_index - cnt);
if (req->cnt < (req_cnt + 2))
goto queuing_error;
}
ctx = sp->u.scmd.ctx =
mempool_alloc(ha->ctx_mempool, GFP_ATOMIC);
if (!ctx) {
ql_log(ql_log_fatal, vha, 0x3010,
"Failed to allocate ctx for cmd=%p.\n", cmd);
goto queuing_error;
}
memset(ctx, 0, sizeof(struct ct6_dsd));
ctx->fcp_cmnd = dma_pool_alloc(ha->fcp_cmnd_dma_pool,
GFP_ATOMIC, &ctx->fcp_cmnd_dma);
if (!ctx->fcp_cmnd) {
ql_log(ql_log_fatal, vha, 0x3011,
"Failed to allocate fcp_cmnd for cmd=%p.\n", cmd);
goto queuing_error;
}
/* Initialize the DSD list and dma handle */
INIT_LIST_HEAD(&ctx->dsd_list);
ctx->dsd_use_cnt = 0;
if (cmd->cmd_len > 16) {
additional_cdb_len = cmd->cmd_len - 16;
if ((cmd->cmd_len % 4) != 0) {
/* SCSI command bigger than 16 bytes must be
* multiple of 4
*/
ql_log(ql_log_warn, vha, 0x3012,
"scsi cmd len %d not multiple of 4 "
"for cmd=%p.\n", cmd->cmd_len, cmd);
goto queuing_error_fcp_cmnd;
}
ctx->fcp_cmnd_len = 12 + cmd->cmd_len + 4;
} else {
additional_cdb_len = 0;
ctx->fcp_cmnd_len = 12 + 16 + 4;
}
cmd_pkt = (struct cmd_type_6 *)req->ring_ptr;
cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
/* Zero out remaining portion of packet. */
/* tagged queuing modifier -- default is TSK_SIMPLE (0). */
clr_ptr = (uint32_t *)cmd_pkt + 2;
memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
cmd_pkt->dseg_count = cpu_to_le16(tot_dsds);
/* Set NPORT-ID and LUN number*/
cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id);
cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa;
cmd_pkt->port_id[1] = sp->fcport->d_id.b.area;
cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain;
cmd_pkt->vp_index = sp->vha->vp_idx;
/* Build IOCB segments */
if (qla24xx_build_scsi_type_6_iocbs(sp, cmd_pkt, tot_dsds))
goto queuing_error_fcp_cmnd;
int_to_scsilun(cmd->device->lun, &cmd_pkt->lun);
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
/* build FCP_CMND IU */
memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
int_to_scsilun(cmd->device->lun, &ctx->fcp_cmnd->lun);
ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
if (cmd->sc_data_direction == DMA_TO_DEVICE)
ctx->fcp_cmnd->additional_cdb_len |= 1;
else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
ctx->fcp_cmnd->additional_cdb_len |= 2;
/* Populate the FCP_PRIO. */
if (ha->flags.fcp_prio_enabled)
ctx->fcp_cmnd->task_attribute |=
sp->fcport->fcp_prio << 3;
memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 +
additional_cdb_len);
*fcp_dl = htonl((uint32_t)scsi_bufflen(cmd));
cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(ctx->fcp_cmnd_len);
cmd_pkt->fcp_cmnd_dseg_address[0] =
cpu_to_le32(LSD(ctx->fcp_cmnd_dma));
cmd_pkt->fcp_cmnd_dseg_address[1] =
cpu_to_le32(MSD(ctx->fcp_cmnd_dma));
sp->flags |= SRB_FCP_CMND_DMA_VALID;
cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd));
/* Set total data segment count. */
cmd_pkt->entry_count = (uint8_t)req_cnt;
/* Specify response queue number where
* completion should happen
*/
cmd_pkt->entry_status = (uint8_t) rsp->id;
} else {
struct cmd_type_7 *cmd_pkt;
req_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
if (req->cnt < (req_cnt + 2)) {
cnt = (uint16_t)RD_REG_DWORD_RELAXED(
&reg->req_q_out[0]);
if (req->ring_index < cnt)
req->cnt = cnt - req->ring_index;
else
req->cnt = req->length -
(req->ring_index - cnt);
}
if (req->cnt < (req_cnt + 2))
goto queuing_error;
cmd_pkt = (struct cmd_type_7 *)req->ring_ptr;
cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
/* Zero out remaining portion of packet. */
/* tagged queuing modifier -- default is TSK_SIMPLE (0).*/
clr_ptr = (uint32_t *)cmd_pkt + 2;
memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
cmd_pkt->dseg_count = cpu_to_le16(tot_dsds);
/* Set NPORT-ID and LUN number*/
cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id);
cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa;
cmd_pkt->port_id[1] = sp->fcport->d_id.b.area;
cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain;
cmd_pkt->vp_index = sp->vha->vp_idx;
int_to_scsilun(cmd->device->lun, &cmd_pkt->lun);
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun,
sizeof(cmd_pkt->lun));
/* Populate the FCP_PRIO. */
if (ha->flags.fcp_prio_enabled)
cmd_pkt->task |= sp->fcport->fcp_prio << 3;
/* Load SCSI command packet. */
memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len);
host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb));
cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd));
/* Build IOCB segments */
qla24xx_build_scsi_iocbs(sp, cmd_pkt, tot_dsds, req);
/* Set total data segment count. */
cmd_pkt->entry_count = (uint8_t)req_cnt;
/* Specify response queue number where
* completion should happen.
*/
cmd_pkt->entry_status = (uint8_t) rsp->id;
}
/* Build command packet. */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
sp->handle = handle;
cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
wmb();
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else
req->ring_ptr++;
sp->flags |= SRB_DMA_VALID;
/* Set chip new ring index. */
/* write, read and verify logic */
dbval = dbval | (req->id << 8) | (req->ring_index << 16);
if (ql2xdbwr)
qla82xx_wr_32(ha, (uintptr_t __force)ha->nxdb_wr_ptr, dbval);
else {
WRT_REG_DWORD(ha->nxdb_wr_ptr, dbval);
wmb();
while (RD_REG_DWORD(ha->nxdb_rd_ptr) != dbval) {
WRT_REG_DWORD(ha->nxdb_wr_ptr, dbval);
wmb();
}
}
/* Manage unprocessed RIO/ZIO commands in response queue. */
if (vha->flags.process_response_queue &&
rsp->ring_ptr->signature != RESPONSE_PROCESSED)
qla24xx_process_response_queue(vha, rsp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
queuing_error_fcp_cmnd:
dma_pool_free(ha->fcp_cmnd_dma_pool, ctx->fcp_cmnd, ctx->fcp_cmnd_dma);
queuing_error:
if (tot_dsds)
scsi_dma_unmap(cmd);
if (sp->u.scmd.ctx) {
mempool_free(sp->u.scmd.ctx, ha->ctx_mempool);
sp->u.scmd.ctx = NULL;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_FUNCTION_FAILED;
}
static void
qla24xx_abort_iocb(srb_t *sp, struct abort_entry_24xx *abt_iocb)
{
struct srb_iocb *aio = &sp->u.iocb_cmd;
scsi_qla_host_t *vha = sp->vha;
struct req_que *req = vha->req;
memset(abt_iocb, 0, sizeof(struct abort_entry_24xx));
abt_iocb->entry_type = ABORT_IOCB_TYPE;
abt_iocb->entry_count = 1;
abt_iocb->handle = cpu_to_le32(MAKE_HANDLE(req->id, sp->handle));
abt_iocb->nport_handle = cpu_to_le16(sp->fcport->loop_id);
abt_iocb->handle_to_abort =
cpu_to_le32(MAKE_HANDLE(req->id, aio->u.abt.cmd_hndl));
abt_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
abt_iocb->port_id[1] = sp->fcport->d_id.b.area;
abt_iocb->port_id[2] = sp->fcport->d_id.b.domain;
abt_iocb->vp_index = vha->vp_idx;
abt_iocb->req_que_no = cpu_to_le16(req->id);
/* Send the command to the firmware */
wmb();
}
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
static void
qla2x00_mb_iocb(srb_t *sp, struct mbx_24xx_entry *mbx)
{
int i, sz;
mbx->entry_type = MBX_IOCB_TYPE;
mbx->handle = sp->handle;
sz = min(ARRAY_SIZE(mbx->mb), ARRAY_SIZE(sp->u.iocb_cmd.u.mbx.out_mb));
for (i = 0; i < sz; i++)
mbx->mb[i] = cpu_to_le16(sp->u.iocb_cmd.u.mbx.out_mb[i]);
}
static void
qla2x00_ctpthru_cmd_iocb(srb_t *sp, struct ct_entry_24xx *ct_pkt)
{
sp->u.iocb_cmd.u.ctarg.iocb = ct_pkt;
qla24xx_prep_ms_iocb(sp->vha, &sp->u.iocb_cmd.u.ctarg);
ct_pkt->handle = sp->handle;
}
static void qla2x00_send_notify_ack_iocb(srb_t *sp,
struct nack_to_isp *nack)
{
struct imm_ntfy_from_isp *ntfy = sp->u.iocb_cmd.u.nack.ntfy;
nack->entry_type = NOTIFY_ACK_TYPE;
nack->entry_count = 1;
nack->ox_id = ntfy->ox_id;
nack->u.isp24.handle = sp->handle;
nack->u.isp24.nport_handle = ntfy->u.isp24.nport_handle;
if (le16_to_cpu(ntfy->u.isp24.status) == IMM_NTFY_ELS) {
nack->u.isp24.flags = ntfy->u.isp24.flags &
cpu_to_le32(NOTIFY24XX_FLAGS_PUREX_IOCB);
}
nack->u.isp24.srr_rx_id = ntfy->u.isp24.srr_rx_id;
nack->u.isp24.status = ntfy->u.isp24.status;
nack->u.isp24.status_subcode = ntfy->u.isp24.status_subcode;
nack->u.isp24.fw_handle = ntfy->u.isp24.fw_handle;
nack->u.isp24.exchange_address = ntfy->u.isp24.exchange_address;
nack->u.isp24.srr_rel_offs = ntfy->u.isp24.srr_rel_offs;
nack->u.isp24.srr_ui = ntfy->u.isp24.srr_ui;
nack->u.isp24.srr_flags = 0;
nack->u.isp24.srr_reject_code = 0;
nack->u.isp24.srr_reject_code_expl = 0;
nack->u.isp24.vp_index = ntfy->u.isp24.vp_index;
}
int
qla2x00_start_sp(srb_t *sp)
{
int rval;
scsi_qla_host_t *vha = sp->vha;
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
struct qla_hw_data *ha = vha->hw;
void *pkt;
unsigned long flags;
rval = QLA_FUNCTION_FAILED;
spin_lock_irqsave(&ha->hardware_lock, flags);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
pkt = qla2x00_alloc_iocbs(vha, sp);
if (!pkt) {
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
ql_log(ql_log_warn, vha, 0x700c,
"qla2x00_alloc_iocbs failed.\n");
goto done;
}
rval = QLA_SUCCESS;
switch (sp->type) {
case SRB_LOGIN_CMD:
IS_FWI2_CAPABLE(ha) ?
qla24xx_login_iocb(sp, pkt) :
qla2x00_login_iocb(sp, pkt);
break;
case SRB_LOGOUT_CMD:
IS_FWI2_CAPABLE(ha) ?
qla24xx_logout_iocb(sp, pkt) :
qla2x00_logout_iocb(sp, pkt);
break;
case SRB_ELS_CMD_RPT:
case SRB_ELS_CMD_HST:
qla24xx_els_iocb(sp, pkt);
break;
case SRB_CT_CMD:
IS_FWI2_CAPABLE(ha) ?
qla24xx_ct_iocb(sp, pkt) :
qla2x00_ct_iocb(sp, pkt);
break;
case SRB_ADISC_CMD:
IS_FWI2_CAPABLE(ha) ?
qla24xx_adisc_iocb(sp, pkt) :
qla2x00_adisc_iocb(sp, pkt);
break;
case SRB_TM_CMD:
IS_QLAFX00(ha) ?
qlafx00_tm_iocb(sp, pkt) :
qla24xx_tm_iocb(sp, pkt);
break;
case SRB_FXIOCB_DCMD:
case SRB_FXIOCB_BCMD:
qlafx00_fxdisc_iocb(sp, pkt);
break;
case SRB_ABT_CMD:
IS_QLAFX00(ha) ?
qlafx00_abort_iocb(sp, pkt) :
qla24xx_abort_iocb(sp, pkt);
break;
case SRB_ELS_DCMD:
qla24xx_els_logo_iocb(sp, pkt);
break;
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
case SRB_CT_PTHRU_CMD:
qla2x00_ctpthru_cmd_iocb(sp, pkt);
break;
case SRB_MB_IOCB:
qla2x00_mb_iocb(sp, pkt);
break;
case SRB_NACK_PLOGI:
case SRB_NACK_PRLI:
case SRB_NACK_LOGO:
qla2x00_send_notify_ack_iocb(sp, pkt);
break;
default:
break;
}
wmb();
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
qla2x00_start_iocbs(vha, ha->req_q_map[0]);
done:
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return rval;
}
static void
qla25xx_build_bidir_iocb(srb_t *sp, struct scsi_qla_host *vha,
struct cmd_bidir *cmd_pkt, uint32_t tot_dsds)
{
uint16_t avail_dsds;
uint32_t *cur_dsd;
uint32_t req_data_len = 0;
uint32_t rsp_data_len = 0;
struct scatterlist *sg;
int index;
int entry_count = 1;
struct bsg_job *bsg_job = sp->u.bsg_job;
/*Update entry type to indicate bidir command */
*((uint32_t *)(&cmd_pkt->entry_type)) =
cpu_to_le32(COMMAND_BIDIRECTIONAL);
/* Set the transfer direction, in this set both flags
* Also set the BD_WRAP_BACK flag, firmware will take care
* assigning DID=SID for outgoing pkts.
*/
cmd_pkt->wr_dseg_count = cpu_to_le16(bsg_job->request_payload.sg_cnt);
cmd_pkt->rd_dseg_count = cpu_to_le16(bsg_job->reply_payload.sg_cnt);
cmd_pkt->control_flags = cpu_to_le16(BD_WRITE_DATA | BD_READ_DATA |
BD_WRAP_BACK);
req_data_len = rsp_data_len = bsg_job->request_payload.payload_len;
cmd_pkt->wr_byte_count = cpu_to_le32(req_data_len);
cmd_pkt->rd_byte_count = cpu_to_le32(rsp_data_len);
cmd_pkt->timeout = cpu_to_le16(qla2x00_get_async_timeout(vha) + 2);
vha->bidi_stats.transfer_bytes += req_data_len;
vha->bidi_stats.io_count++;
vha->qla_stats.output_bytes += req_data_len;
vha->qla_stats.output_requests++;
/* Only one dsd is available for bidirectional IOCB, remaining dsds
* are bundled in continuation iocb
*/
avail_dsds = 1;
cur_dsd = (uint32_t *)&cmd_pkt->fcp_data_dseg_address;
index = 0;
for_each_sg(bsg_job->request_payload.sg_list, sg,
bsg_job->request_payload.sg_cnt, index) {
dma_addr_t sle_dma;
cont_a64_entry_t *cont_pkt;
/* Allocate additional continuation packets */
if (avail_dsds == 0) {
/* Continuation type 1 IOCB can accomodate
* 5 DSDS
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req);
cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
avail_dsds = 5;
entry_count++;
}
sle_dma = sg_dma_address(sg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
avail_dsds--;
}
/* For read request DSD will always goes to continuation IOCB
* and follow the write DSD. If there is room on the current IOCB
* then it is added to that IOCB else new continuation IOCB is
* allocated.
*/
for_each_sg(bsg_job->reply_payload.sg_list, sg,
bsg_job->reply_payload.sg_cnt, index) {
dma_addr_t sle_dma;
cont_a64_entry_t *cont_pkt;
/* Allocate additional continuation packets */
if (avail_dsds == 0) {
/* Continuation type 1 IOCB can accomodate
* 5 DSDS
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req);
cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
avail_dsds = 5;
entry_count++;
}
sle_dma = sg_dma_address(sg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
avail_dsds--;
}
/* This value should be same as number of IOCB required for this cmd */
cmd_pkt->entry_count = entry_count;
}
int
qla2x00_start_bidir(srb_t *sp, struct scsi_qla_host *vha, uint32_t tot_dsds)
{
struct qla_hw_data *ha = vha->hw;
unsigned long flags;
uint32_t handle;
uint32_t index;
uint16_t req_cnt;
uint16_t cnt;
uint32_t *clr_ptr;
struct cmd_bidir *cmd_pkt = NULL;
struct rsp_que *rsp;
struct req_que *req;
int rval = EXT_STATUS_OK;
rval = QLA_SUCCESS;
rsp = ha->rsp_q_map[0];
req = vha->req;
/* Send marker if required */
if (vha->marker_needed != 0) {
if (qla2x00_marker(vha, req,
rsp, 0, 0, MK_SYNC_ALL) != QLA_SUCCESS)
return EXT_STATUS_MAILBOX;
vha->marker_needed = 0;
}
/* Acquire ring specific lock */
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
if (index == req->num_outstanding_cmds) {
rval = EXT_STATUS_BUSY;
goto queuing_error;
}
/* Calculate number of IOCB required */
req_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
/* Check for room on request queue. */
if (req->cnt < req_cnt + 2) {
cnt = IS_SHADOW_REG_CAPABLE(ha) ? *req->out_ptr :
RD_REG_DWORD_RELAXED(req->req_q_out);
if (req->ring_index < cnt)
req->cnt = cnt - req->ring_index;
else
req->cnt = req->length -
(req->ring_index - cnt);
}
if (req->cnt < req_cnt + 2) {
rval = EXT_STATUS_BUSY;
goto queuing_error;
}
cmd_pkt = (struct cmd_bidir *)req->ring_ptr;
cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
/* Zero out remaining portion of packet. */
/* tagged queuing modifier -- default is TSK_SIMPLE (0).*/
clr_ptr = (uint32_t *)cmd_pkt + 2;
memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
/* Set NPORT-ID (of vha)*/
cmd_pkt->nport_handle = cpu_to_le16(vha->self_login_loop_id);
cmd_pkt->port_id[0] = vha->d_id.b.al_pa;
cmd_pkt->port_id[1] = vha->d_id.b.area;
cmd_pkt->port_id[2] = vha->d_id.b.domain;
qla25xx_build_bidir_iocb(sp, vha, cmd_pkt, tot_dsds);
cmd_pkt->entry_status = (uint8_t) rsp->id;
/* Build command packet. */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
sp->handle = handle;
req->cnt -= req_cnt;
/* Send the command to the firmware */
wmb();
qla2x00_start_iocbs(vha, req);
queuing_error:
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return rval;
}